busybox: remove busybox menuconfig from top level menuconfig

This will help with avoiding bogus bug reports caused by stale configs
and bad cases of user tinkering :)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39106

1 files changed, 0 insertions, 232 deletions

diff --git a/package/utils/busybox/config/libbb/Config.in b/package/utils/busybox/config/libbb/Config.in
deleted file mode 100644
index 6475403..0000000
--- a/package/utils/busybox/config/libbb/Config.in
+++ /dev/null
@@ -1,232 +0,0 @@
-# DO NOT EDIT. This file is generated from Config.src
-#
-# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
-#
-
-menu "Busybox Library Tuning"
-
-config BUSYBOX_CONFIG_FEATURE_SYSTEMD
-	bool "Enable systemd support"
-	default n
-	help
-	  If you plan to use busybox daemons on a system where daemons
-	  are controlled by systemd, enable this option.
-	  If you don't use systemd, it is still safe to enable it,
-	  but the downside is increased code size.
-config BUSYBOX_CONFIG_FEATURE_RTMINMAX
-	bool "Support RTMIN[+n] and RTMAX[-n] signal names"
-	default n
-	help
-	  Support RTMIN[+n] and RTMAX[-n] signal names
-	  in kill, killall etc. This costs ~250 bytes.
-
-config BUSYBOX_CONFIG_PASSWORD_MINLEN
-	int "Minimum password length"
-	default 6
-	range 5 32
-	help
-	  Minimum allowable password length.
-
-config BUSYBOX_CONFIG_MD5_SIZE_VS_SPEED
-	int "MD5: Trade bytes for speed (0:fast, 3:slow)"
-	default 2
-	range 0 3
-	help
-	  Trade binary size versus speed for the md5sum algorithm.
-	  Approximate values running uClibc and hashing
-	  linux-2.4.4.tar.bz2 were:
-	                    user times (sec)  text size (386)
-	  0 (fastest)         1.1                6144
-	  1                   1.4                5392
-	  2                   3.0                5088
-	  3 (smallest)        5.1                4912
-
-config BUSYBOX_CONFIG_FEATURE_FAST_TOP
-	bool "Faster /proc scanning code (+100 bytes)"
-	default y
-	help
-	  This option makes top (and ps) ~20% faster (or 20% less CPU hungry),
-	  but code size is slightly bigger.
-
-config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS
-	bool "Support for /etc/networks"
-	default n
-	help
-	  Enable support for network names in /etc/networks. This is
-	  a rarely used feature which allows you to use names
-	  instead of IP/mask pairs in route command.
-
-config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
-	bool "Use termios to manipulate the screen"
-	default n
-	depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_POWERTOP
-	help
-	  This option allows utilities such as 'more' and 'top' to determine
-	  the size of the screen. If you leave this disabled, your utilities
-	  that display things on the screen will be especially primitive and
-	  will be unable to determine the current screen size, and will be
-	  unable to move the cursor.
-
-config BUSYBOX_CONFIG_FEATURE_EDITING
-	bool "Command line editing"
-	default y
-	help
-	  Enable line editing (mainly for shell command line).
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_MAX_LEN
-	int "Maximum length of input"
-	range 128 8192
-	default 512
-	depends on BUSYBOX_CONFIG_FEATURE_EDITING
-	help
-	  Line editing code uses on-stack buffers for storage.
-	  You may want to decrease this parameter if your target machine
-	  benefits from smaller stack usage.
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_VI
-	bool "vi-style line editing commands"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_EDITING
-	help
-	  Enable vi-style line editing. In shells, this mode can be
-	  turned on and off with "set -o vi" and "set +o vi".
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
-	int "History size"
-	# Don't allow way too big values here, code uses fixed "char *history[N]" struct member
-	range 0 9999
-	default 256
-	depends on BUSYBOX_CONFIG_FEATURE_EDITING
-	help
-	  Specify command history size (0 - disable).
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
-	bool "History saving"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_EDITING
-	help
-	  Enable history saving in shells.
-
-config BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH
-	bool "Reverse history search"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
-	help
-	  Enable readline-like Ctrl-R combination for reverse history search.
-	  Increases code by about 0.5k.
-
-config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
-	bool "Tab completion"
-	default y
-	depends on BUSYBOX_CONFIG_FEATURE_EDITING
-	help
-	  Enable tab completion.
-
-config BUSYBOX_CONFIG_FEATURE_USERNAME_COMPLETION
-	bool "Username completion"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
-	help
-	  Enable username completion.
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_PROMPT
-	bool "Fancy shell prompts"
-	default y
-	depends on BUSYBOX_CONFIG_FEATURE_EDITING
-	help
-	  Setting this option allows for prompts to use things like \w and
-	  \$ and escape codes.
-
-config BUSYBOX_CONFIG_FEATURE_EDITING_ASK_TERMINAL
-	bool "Query cursor position from terminal"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_EDITING
-	help
-	  Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
-	  current cursor position. This information is used to make line
-	  editing more robust in some cases.
-	  If you are not sure whether your terminals respond to this code
-	  correctly, or want to save on code size (about 400 bytes),
-	  then do not turn this option on.
-
-config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP
-	bool "Non-POSIX, but safer, copying to special nodes"
-	default y
-	help
-	  With this option, "cp file symlink" will delete symlink
-	  and create a regular file. This does not conform to POSIX,
-	  but prevents a symlink attack.
-	  Similarly, "cp file device" will not send file's data
-	  to the device. (To do that, use "cat file >device")
-
-config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
-	bool "Give more precise messages when copy fails (cp, mv etc)"
-	default n
-	help
-	  Error messages with this feature enabled:
-	    $ cp file /does_not_exist/file
-	    cp: cannot create '/does_not_exist/file': Path does not exist
-	    $ cp file /vmlinuz/file
-	    cp: cannot stat '/vmlinuz/file': Path has non-directory component
-	  If this feature is not enabled, they will be, respectively:
-	    cp: cannot create '/does_not_exist/file': No such file or directory
-	    cp: cannot stat '/vmlinuz/file': Not a directory
-	  This will cost you ~60 bytes.
-
-config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
-	int "Copy buffer size, in kilobytes"
-	range 1 1024
-	default 4
-	help
-	  Size of buffer used by cp, mv, install, wget etc.
-	  Buffers which are 4 kb or less will be allocated on stack.
-	  Bigger buffers will be allocated with mmap, with fallback to 4 kb
-	  stack buffer if mmap fails.
-
-config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS
-	bool "Skip rootfs in mount table"
-	default n
-	help
-	  Ignore rootfs entry in mount table.
-
-	  In Linux, kernel has a special filesystem, rootfs, which is initially
-	  mounted on /. It contains initramfs data, if kernel is configured
-	  to have one. Usually, another file system is mounted over / early
-	  in boot process, and therefore most tools which manipulate
-	  mount table, such as df, will skip rootfs entry.
-
-	  However, some systems do not mount anything on /.
-	  If you need to configure busybox for one of these systems,
-	  you may find useful to turn this option off to make df show
-	  initramfs statistic.
-
-	  Otherwise, choose Y.
-
-config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
-	bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
-	default n
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	  Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
-	  time intervals (time, ping, traceroute etc need this).
-	  Probably requires Linux 2.6+. If not selected, gettimeofday
-	  will be used instead (which gives wrong results if date/time
-	  is reset).
-
-config BUSYBOX_CONFIG_IOCTL_HEX2STR_ERROR
-	bool "Use ioctl names rather than hex values in error messages"
-	default y
-	help
-	  Use ioctl names rather than hex values in error messages
-	  (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
-	  saves about 1400 bytes.
-
-config BUSYBOX_CONFIG_FEATURE_HWIB
-	bool "Support infiniband HW"
-	default n
-	help
-	  Support for printing infiniband addresses in
-	  network applets.
-
-endmenu