hostapd: add a build variant for wpa_supplicant and one for a multicall hostapd+supplicant program (wpad) and remove the old wpa_supplicant package

SVN-Revision: 19286

4 files changed, 0 insertions, 500 deletions

diff --git a/package/wpa_supplicant/files/config.brcm-2.4 b/package/wpa_supplicant/files/config.brcm-2.4
deleted file mode 100644
index 0e58fa0..0000000
--- a/package/wpa_supplicant/files/config.brcm-2.4
+++ /dev/null
@@ -1,382 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-#	-I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
-#CFLAGS += -I../../include/wireless
-
-# Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-# Set include directory to the madwifi source tree
-#CFLAGS += -I../../madwifi
-
-# Driver interface for Prism54 driver
-# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
-# for developers only)
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for ndiswrapper
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-#CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for old Broadcom driver
-# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
-# Linux wireless extensions and does not need (or even work) with the old
-# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100/2200 driver
-#CONFIG_DRIVER_IPW=y
-
-# Driver interface for Ralink driver
-#CONFIG_DRIVER_RALINK=y
-
-# Driver interface for generic Linux wireless extensions
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-#CONFIG_DRIVER_NL80211=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for the Broadcom RoboSwitch family
-CONFIG_DRIVER_ROBOSWITCH=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-#CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-#CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
-# save about 1 kB in code size when building only WPA-Personal (no EAP support)
-# or 6 kB if building for WPA-Enterprise.
-#CONFIG_NO_WPA2=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Remove AES extra functions. This can be used to reduce code size by about
-# 1.5 kB by removing extra AES modes that are not needed for commonly used
-# client configurations (they are needed for some EAP types).
-#CONFIG_NO_AES_EXTRAS=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-#	path is given on command line, not here; this option is just used to
-#	select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-CONFIG_MAIN=main
-
-# Select wrapper for operatins system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-# eloop_none = Empty template
-CONFIG_ELOOP=eloop
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-CONFIG_L2_PACKET=linux
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
-# internal = Internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
-# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
-# even though the core GnuTLS library is released under LGPL, this extra
-# library uses GPL and as such, the terms of GPL apply to the combination
-# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
-# apply for distribution of the resulting binary.
-#CONFIG_GNUTLS_EXTRA=y
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for DBus control interface
-#CONFIG_CTRL_IFACE_DBUS=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# Include client MLME (management frame processing).
-# This can be used to move MLME processing of Linux mac80211 stack into user
-# space. Please note that this is currently only available with
-# driver_nl80211.c and only with a modified version of Linux kernel and
-# wpa_supplicant.
-#CONFIG_CLIENT_MLME=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-CONFIG_DEBUG_FILE=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
diff --git a/package/wpa_supplicant/files/config.brcm47xx b/package/wpa_supplicant/files/config.brcm47xx
deleted file mode 120000
index c3fbf34..0000000
--- a/package/wpa_supplicant/files/config.brcm47xx
+++ /dev/null
@@ -1 +0,0 @@
-config.brcm-2.4
\ No newline at end of file
diff --git a/package/wpa_supplicant/files/config.brcm63xx b/package/wpa_supplicant/files/config.brcm63xx
deleted file mode 120000
index c3fbf34..0000000
--- a/package/wpa_supplicant/files/config.brcm63xx
+++ /dev/null
@@ -1 +0,0 @@
-config.brcm-2.4
\ No newline at end of file
diff --git a/package/wpa_supplicant/files/wpa_supplicant.sh b/package/wpa_supplicant/files/wpa_supplicant.sh
deleted file mode 100644
index ea10b38..0000000
--- a/package/wpa_supplicant/files/wpa_supplicant.sh
+++ /dev/null
@@ -1,116 +0,0 @@
-wpa_supplicant_setup_vif() {
-	local vif="$1"
-	local driver="$2"
-	local key="$key"
-
-	# wpa_supplicant should use wext for mac80211 cards
-	[ "$driver" = "mac80211" ] && driver='wext'
-
-	# make sure we have the psk
-	[ -n "$key" ] || {
-		config_get key "$vif" key
-	}
-
-	case "$enc" in
-		*wep*)
-			key_mgmt='NONE'
-			config_get key "$vif" key
-			key="${key:-1}"
-			case "$key" in
-				[1234])
-					for idx in 1 2 3 4; do
-						local zidx
-						zidx=$(($idx - 1))
-						config_get ckey "$vif" "key${idx}"
-						[ -n "$ckey" ] && \
-							append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")"
-					done
-					wep_tx_keyidx="wep_tx_keyidx=$((key - 1))"
-				;;
-				*)
-					wep_key0="wep_key0=$(prepare_key_wep "$key")"
-					wep_tx_keyidx="wep_tx_keyidx=0"
-				;;
-			esac
-		;;
-		*psk*)
-			key_mgmt='WPA-PSK'
-			config_get_bool usepassphrase "$vif" passphrase 1
-			case "$enc" in
-				*psk2*)
-					proto='proto=RSN'
-					if [ "$usepassphrase" = "1" ]; then
-						passphrase="psk=\"${key}\""
-					else
-						passphrase="psk=${key}"
-					fi
-				;;
-				*psk*)
-					proto='proto=WPA'
-					if [ "$usepassphrase" = "1" ]; then
-						passphrase="psk=\"${key}\""
-					else
-						passphrase="psk=${key}"
-					fi
-				;;
-			esac
-		;;
-		*wpa*|*8021x*)
-			proto='proto=WPA2'
-			key_mgmt='WPA-EAP'
-			config_get ca_cert "$vif" ca_cert
-			ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""}
-			case "$eap_type" in
-				tls)
-					pairwise='pairwise=CCMP'
-					group='group=CCMP'
-					config_get priv_key "$vif" priv_key
-					config_get priv_key_pwd "$vif" priv_key_pwd
-					priv_key="private_key=\"$priv_key\""
-					priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
-				;;
-				peap|ttls)
-					config_get auth "$vif" auth
-					config_get identity "$vif" identity
-					config_get password "$vif" password
-					phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
-					identity="identity=\"$identity\""
-					password="password=\"$password\""
-				;;
-			esac
-			eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')"
-		;;
-	esac
-	config_get ifname "$vif" ifname
-	config_get bridge "$vif" bridge
-	config_get ssid "$vif" ssid
-	config_get bssid "$vif" bssid
-	bssid=${bssid:+"bssid=$bssid"}
-	cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
-ctrl_interface=/var/run/wpa_supplicant-$ifname
-network={
-	scan_ssid=1
-	ssid="$ssid"
-	$bssid
-	key_mgmt=$key_mgmt
-	$proto
-	$passphrase
-	$pairwise
-	$group
-	$eap_type
-	$ca_cert
-	$priv_key
-	$priv_key_pwd
-	$phase2
-	$identity
-	$password
-	$wep_key0
-	$wep_key1
-	$wep_key2
-	$wep_key3
-	$wep_tx_keyidx
-}
-EOF
-	[ -z "$proto" -a "$key_mgmt" != "NONE" ] || \
-		wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf
-}