uboot-sunxi: various updates - use mainline uboot-sunxi version (2015.01-rc3) - add support for Bananapro

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43899

7 files changed, 25118 insertions, 11525 deletions

diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile
index e650051..eb66cab 100644
--- a/package/boot/uboot-sunxi/Makefile
+++ b/package/boot/uboot-sunxi/Makefile
@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=u-boot
-PKG_VERSION:=2014.04
+PKG_VERSION:=2015.01-rc3
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:= \
 	http://mirror2.openwrt.org/sources \
 	ftp://ftp.denx.de/pub/u-boot
-PKG_SOURCE_VERSION:=6d2116d1385a66e9a59742caa9d62a54
+PKG_SOURCE_VERSION:=e680848838ca20a60d43b66a218d865b
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_LICENSE:=GPL-2.0 GPL-2.0+
@@ -35,7 +35,7 @@ define uboot/A13-OLinuXino
   TITLE:=U-Boot for the A13 OlinuXino
 endef
 
-define uboot/A20-OLinuXino_Lime
+define uboot/A20-OLinuXino-Lime
   TITLE:=U-Boot for the A20 OLinuXino LIME
 endef
 
@@ -47,6 +47,10 @@ define uboot/Bananapi
   TITLE:=U-Boot for Bananapi
 endef
 
+define uboot/Bananapro
+  TITLE:=U-Boot for Bananapro
+endef
+
 define uboot/Cubieboard
   TITLE:=U-Boot for Cubieboard
 endef
@@ -63,12 +67,16 @@ define uboot/Hackberry
   TITLE:=U-Boot for the Hackbeery
 endef
 
+define uboot/Mele_M9
+  TITLE:=U-Boot for the Mele M9 (A31)
+endef
+
 define uboot/OLIMEX-A13-SOM
   TITLE:=U-Boot for the Olimex A13 SOM
 endef
 
-define uboot/pcDuino
-  TITLE:=U-Boot for pcDuino
+define uboot/Linksprite_pcDuino
+  TITLE:=U-Boot for Linksprite pcDuino
 endef  
 
 define uboot/Linksprite_pcDuino3
@@ -78,15 +86,17 @@ endef
 UBOOTS:= \
 	A10-OLinuXino-Lime \
 	A13-OLinuXino \
-	A20-OLinuXino_Lime \
+	A20-OLinuXino-Lime \
 	A20-OLinuXino_MICRO \
 	Bananapi \
+	Bananapro \
 	Cubieboard \
 	Cubieboard2 \
 	Cubietruck \
 	Hackberry \
+	Mele_M9 \
 	OLIMEX-A13-SOM \
-	pcDuino \
+	Linksprite_pcDuino \
 	Linksprite_pcDuino3 \
 
 define Package/uboot/template
@@ -115,7 +125,7 @@ endif
 
 define Build/Configure
 	$(MAKE) -C $(PKG_BUILD_DIR) \
-		USE_PRIVATE_LIBGCC=yes $(UBOOT_CONFIG)_config
+		USE_PRIVATE_LIBGCC=yes $(UBOOT_CONFIG)_defconfig
 endef
 
 define Build/Compile
@@ -133,6 +143,7 @@ define Package/uboot/install/default
 		$(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-u-boot-with-spl.bin
 	$(CP) uEnv.txt \
 		$(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-uEnv.txt
+	mkimage -C none -A arm -T script -d $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-uEnv.txt $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-boot.scr
 endef
 
 define Package/uboot/install/template
diff --git a/package/boot/uboot-sunxi/patches/001-u-boot-trunk-3e1ded1fff32d8af8cc5eec22c56797621ea6649.patch b/package/boot/uboot-sunxi/patches/001-u-boot-trunk-3e1ded1fff32d8af8cc5eec22c56797621ea6649.patch
new file mode 100644
index 0000000..fc99523
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/001-u-boot-trunk-3e1ded1fff32d8af8cc5eec22c56797621ea6649.patch
@@ -0,0 +1,25006 @@
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c	2015-01-01 17:34:32.005507318 +0100
+@@ -209,6 +209,10 @@
+ 	.gate		= SW_ONLY_GATE(0x0360, 20, 4),
+ };
+ 
++static struct bus_clk_data usb_otg_ahb_data = {
++	.gate		= HW_SW_GATE_AUTO(0x0348, 16, 0, 1),
++};
++
+ static struct bus_clk_data sdio1_ahb_data = {
+ 	.gate		= HW_SW_GATE_AUTO(0x0358, 16, 0, 1),
+ };
+@@ -331,6 +335,17 @@
+  */
+ 
+ /* KPM bus clocks */
++static struct bus_clock usb_otg_ahb_clk = {
++	.clk = {
++		.name = "usb_otg_ahb_clk",
++		.parent = &kpm_ccu_clk.clk,
++		.ops = &bus_clk_ops,
++		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
++	},
++	.freq_tbl = master_ahb_freq_tbl,
++	.data = &usb_otg_ahb_data,
++};
++
+ static struct bus_clock sdio1_ahb_clk = {
+ 	.clk = {
+ 		.name = "sdio1_ahb_clk",
+@@ -541,6 +556,7 @@
+ 	CLK_LK(bsc2),
+ 	CLK_LK(bsc3),
+ 	/* Bus clocks */
++	CLK_LK(usb_otg_ahb),
+ 	CLK_LK(sdio1_ahb),
+ 	CLK_LK(sdio2_ahb),
+ 	CLK_LK(sdio3_ahb),
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c u-boot/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/bcm281xx/clk-usb-otg.c	2015-01-01 17:34:32.005507318 +0100
+@@ -0,0 +1,27 @@
++/*
++ * Copyright 2014 Broadcom Corporation.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/errno.h>
++#include <asm/arch/sysmap.h>
++#include "clk-core.h"
++
++/* Enable appropriate clocks for the USB OTG port */
++int clk_usb_otg_enable(void *base)
++{
++	char *ahbstr;
++
++	switch ((u32) base) {
++	case HSOTG_BASE_ADDR:
++		ahbstr = "usb_otg_ahb_clk";
++		break;
++	default:
++		printf("%s: base 0x%p not found\n", __func__, base);
++		return -EINVAL;
++	}
++
++	return clk_get_and_enable(ahbstr);
++}
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/Makefile u-boot/arch/arm/cpu/armv7/bcm281xx/Makefile
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/bcm281xx/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/bcm281xx/Makefile	2015-01-01 17:34:32.005507318 +0100
+@@ -10,3 +10,4 @@
+ obj-y	+= clk-sdio.o
+ obj-y	+= clk-bsc.o
+ obj-$(CONFIG_BCM_SF2_ETH) += clk-eth.o
++obj-y	+= clk-usb-otg.o
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/kona-common/clk-stubs.c u-boot/arch/arm/cpu/armv7/kona-common/clk-stubs.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/kona-common/clk-stubs.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/kona-common/clk-stubs.c	2015-01-01 17:34:32.009507252 +0100
+@@ -19,3 +19,8 @@
+ {
+ 	return 0;
+ }
++
++int __weak clk_usb_otg_enable(void *base)
++{
++	return 0;
++}
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/cpu.c u-boot/arch/arm/cpu/armv7/ls102xa/cpu.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/cpu.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/ls102xa/cpu.c	2015-01-01 17:34:32.009507252 +0100
+@@ -12,6 +12,8 @@
+ #include <netdev.h>
+ #include <fsl_esdhc.h>
+ 
++#include "fsl_epu.h"
++
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+ #if defined(CONFIG_DISPLAY_CPUINFO)
+@@ -101,3 +103,35 @@
+ 
+ 	return 0;
+ }
++
++int arch_cpu_init(void)
++{
++	void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
++
++	/*
++	 * After wakeup from deep sleep, Clear EPU registers
++	 * as early as possible to prevent from possible issue.
++	 * It's also safe to clear at normal boot.
++	 */
++	fsl_epu_clean(epu_base);
++
++	return 0;
++}
++
++#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
++/* Set the address at which the secondary core starts from.*/
++void smp_set_core_boot_addr(unsigned long addr, int corenr)
++{
++	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
++
++	out_be32(&gur->scratchrw[0], addr);
++}
++
++/* Release the secondary core from holdoff state and kick it */
++void smp_kick_all_cpus(void)
++{
++	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
++
++	out_be32(&gur->brrl, 0x2);
++}
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fdt.c u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fdt.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c	2015-01-01 17:34:32.009507252 +0100
+@@ -91,7 +91,7 @@
+ 	}
+ 
+ 	do_fixup_by_prop_u32(blob, "device_type", "soc",
+-			     4, "bus-frequency", busclk / 2, 1);
++			     4, "bus-frequency", busclk, 1);
+ 
+ 	ft_fixup_enet_phy_connect_type(blob);
+ 
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.c u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.c	2015-01-01 17:34:32.009507252 +0100
+@@ -0,0 +1,57 @@
++/*
++ * Copyright 2014 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++
++#include "fsl_epu.h"
++
++/**
++ * fsl_epu_clean - Clear EPU registers
++ */
++void fsl_epu_clean(void *epu_base)
++{
++	u32 offset;
++
++	/* follow the exact sequence to clear the registers */
++	/* Clear EPACRn */
++	for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE)
++		out_be32(epu_base + offset, 0);
++
++	/* Clear EPEVTCRn */
++	for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE)
++		out_be32(epu_base + offset, 0);
++
++	/* Clear EPGCR */
++	out_be32(epu_base + EPGCR, 0);
++
++	/* Clear EPSMCRn */
++	for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE)
++		out_be32(epu_base + offset, 0);
++
++	/* Clear EPCCRn */
++	for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE)
++		out_be32(epu_base + offset, 0);
++
++	/* Clear EPCMPRn */
++	for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE)
++		out_be32(epu_base + offset, 0);
++
++	/* Clear EPCTRn */
++	for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE)
++		out_be32(epu_base + offset, 0);
++
++	/* Clear EPIMCRn */
++	for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE)
++		out_be32(epu_base + offset, 0);
++
++	/* Clear EPXTRIGCRn */
++	out_be32(epu_base + EPXTRIGCR, 0);
++
++	/* Clear EPECRn */
++	for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE)
++		out_be32(epu_base + offset, 0);
++}
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.h u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.h
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/fsl_epu.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/ls102xa/fsl_epu.h	2015-01-01 17:34:32.009507252 +0100
+@@ -0,0 +1,68 @@
++/*
++ * Copyright 2014 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __FSL_EPU_H
++#define __FSL_EPU_H
++
++#include <asm/types.h>
++
++#define FSL_STRIDE_4B	4
++#define FSL_STRIDE_8B	8
++
++/* Block offsets */
++#define EPU_BLOCK_OFFSET	0x00000000
++
++/* EPGCR (Event Processor Global Control Register) */
++#define EPGCR		0x000
++
++/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */
++#define EPEVTCR0	0x050
++#define EPEVTCR9	0x074
++#define EPEVTCR_STRIDE	FSL_STRIDE_4B
++
++/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
++#define EPXTRIGCR	0x090
++
++/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */
++#define EPIMCR0		0x100
++#define EPIMCR31	0x17C
++#define EPIMCR_STRIDE	FSL_STRIDE_4B
++
++/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */
++#define EPSMCR0		0x200
++#define EPSMCR15	0x278
++#define EPSMCR_STRIDE	FSL_STRIDE_8B
++
++/* EPECR0-15 (Event Processor Event Control Registers) */
++#define EPECR0		0x300
++#define EPECR15		0x33C
++#define EPECR_STRIDE	FSL_STRIDE_4B
++
++/* EPACR0-15 (Event Processor Action Control Registers) */
++#define EPACR0		0x400
++#define EPACR15		0x43C
++#define EPACR_STRIDE	FSL_STRIDE_4B
++
++/* EPCCRi0-15 (Event Processor Counter Control Registers) */
++#define EPCCR0		0x800
++#define EPCCR15		0x83C
++#define EPCCR31		0x87C
++#define EPCCR_STRIDE	FSL_STRIDE_4B
++
++/* EPCMPR0-15 (Event Processor Counter Compare Registers) */
++#define EPCMPR0		0x900
++#define EPCMPR15	0x93C
++#define EPCMPR31	0x97C
++#define EPCMPR_STRIDE	FSL_STRIDE_4B
++
++/* EPCTR0-31 (Event Processor Counter Register) */
++#define EPCTR0		0xA00
++#define EPCTR31		0xA7C
++#define EPCTR_STRIDE	FSL_STRIDE_4B
++
++void fsl_epu_clean(void *epu_base);
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/Makefile u-boot/arch/arm/cpu/armv7/ls102xa/Makefile
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/ls102xa/Makefile	2015-01-01 17:34:32.009507252 +0100
+@@ -7,6 +7,8 @@
+ obj-y	+= cpu.o
+ obj-y	+= clock.o
+ obj-y	+= timer.o
++obj-y	+= fsl_epu.o
+ 
+ obj-$(CONFIG_OF_LIBFDT) += fdt.o
+ obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o
++obj-$(CONFIG_SPL) += spl.o
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/spl.c u-boot/arch/arm/cpu/armv7/ls102xa/spl.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/ls102xa/spl.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/ls102xa/spl.c	2015-01-01 17:34:32.009507252 +0100
+@@ -0,0 +1,33 @@
++/*
++ * Copyright 2014 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <spl.h>
++
++u32 spl_boot_device(void)
++{
++#ifdef CONFIG_SPL_MMC_SUPPORT
++	return BOOT_DEVICE_MMC1;
++#endif
++	return BOOT_DEVICE_NAND;
++}
++
++u32 spl_boot_mode(void)
++{
++	switch (spl_boot_device()) {
++	case BOOT_DEVICE_MMC1:
++#ifdef CONFIG_SPL_FAT_SUPPORT
++		return MMCSD_MODE_FAT;
++#else
++		return MMCSD_MODE_RAW;
++#endif
++	case BOOT_DEVICE_NAND:
++		return 0;
++	default:
++		puts("spl: error: unsupported device\n");
++		hang();
++	}
++}
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/Makefile u-boot/arch/arm/cpu/armv7/Makefile
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/Makefile	2015-01-01 17:34:32.001507383 +0100
+@@ -56,6 +56,7 @@
+ obj-$(CONFIG_RMOBILE) += rmobile/
+ obj-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx/
+ obj-$(CONFIG_SOCFPGA) += socfpga/
++obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/
+ obj-$(CONFIG_ARCH_SUNXI) += sunxi/
+ obj-$(CONFIG_TEGRA20) += tegra20/
+ obj-$(CONFIG_U8500) += u8500/
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/mx6/clock.c u-boot/arch/arm/cpu/armv7/mx6/clock.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/mx6/clock.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/mx6/clock.c	2015-01-01 17:34:32.009507252 +0100
+@@ -443,7 +443,7 @@
+ 	struct anatop_regs __iomem *anatop =
+ 		(struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
+ 
+-	if (freq < ENET_25MHz || freq > ENET_125MHz)
++	if (freq < ENET_25MHZ || freq > ENET_125MHZ)
+ 		return -EINVAL;
+ 
+ 	reg = readl(&anatop->pll_enet);
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/nonsec_virt.S u-boot/arch/arm/cpu/armv7/nonsec_virt.S
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/nonsec_virt.S	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/nonsec_virt.S	2015-01-01 17:34:32.013507186 +0100
+@@ -169,11 +169,11 @@
+  * we do this here instead.
+  * But first check if we have the generic timer.
+  */
+-#ifdef CONFIG_SYS_CLK_FREQ
++#ifdef CONFIG_TIMER_CLK_FREQ
+ 	mrc	p15, 0, r0, c0, c1, 1		@ read ID_PFR1
+ 	and	r0, r0, #CPUID_ARM_GENTIMER_MASK	@ mask arch timer bits
+ 	cmp	r0, #(1 << CPUID_ARM_GENTIMER_SHIFT)
+-	ldreq	r1, =CONFIG_SYS_CLK_FREQ
++	ldreq	r1, =CONFIG_TIMER_CLK_FREQ
+ 	mcreq	p15, 0, r1, c14, c0, 0		@ write CNTFRQ
+ #endif
+ 
+@@ -191,6 +191,9 @@
+ 	wfi
+ 	ldr	r1, =CONFIG_SMP_PEN_ADDR	@ load start address
+ 	ldr	r1, [r1]
++#ifdef CONFIG_PEN_ADDR_BIG_ENDIAN
++	rev	r1, r1
++#endif
+ 	cmp	r0, r1			@ make sure we dont execute this code
+ 	beq	smp_waitloop		@ again (due to a spurious wakeup)
+ 	mov	r0, r1
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/freeze_controller.c u-boot/arch/arm/cpu/armv7/socfpga/freeze_controller.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/freeze_controller.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/socfpga/freeze_controller.c	2015-01-01 17:34:32.021507054 +0100
+@@ -38,8 +38,7 @@
+ 	/* Freeze channel 0 to 2 */
+ 	for (channel_id = 0; channel_id <= 2; channel_id++) {
+ 		ioctrl_reg_offset = (u32)(
+-			&freeze_controller_base->vioctrl +
+-			(channel_id << SYSMGR_FRZCTRL_VIOCTRL_SHIFT));
++			&freeze_controller_base->vioctrl + channel_id);
+ 
+ 		/*
+ 		 * Assert active low enrnsl, plniotri
+@@ -120,8 +119,7 @@
+ 	/* Thaw channel 0 to 2 */
+ 	for (channel_id = 0; channel_id <= 2; channel_id++) {
+ 		ioctrl_reg_offset
+-			= (u32)(&freeze_controller_base->vioctrl
+-				+ (channel_id << SYSMGR_FRZCTRL_VIOCTRL_SHIFT));
++			= (u32)(&freeze_controller_base->vioctrl + channel_id);
+ 
+ 		/*
+ 		 * Assert active low bhniotri signal and
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/reset_manager.c u-boot/arch/arm/cpu/armv7/socfpga/reset_manager.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/socfpga/reset_manager.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/socfpga/reset_manager.c	2015-01-01 17:34:32.021507054 +0100
+@@ -110,6 +110,6 @@
+ {
+ 	const void *reset = &reset_manager_base->per_mod_reset;
+ 
+-	clrbits_le32(reset, 1 << RSTMGR_PERMODRST_SPIM0_LSB);
+-	clrbits_le32(reset, 1 << RSTMGR_PERMODRST_SPIM1_LSB);
++	clrbits_le32(reset, (1 << RSTMGR_PERMODRST_SPIM0_LSB) |
++		     (1 << RSTMGR_PERMODRST_SPIM1_LSB));
+ }
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/clock.c u-boot/arch/arm/cpu/armv7/stv0991/clock.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/clock.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/stv0991/clock.c	2015-01-01 17:34:32.025506990 +0100
+@@ -0,0 +1,41 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <asm/io.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/stv0991_cgu.h>
++#include<asm/arch/stv0991_periph.h>
++
++static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
++				(struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
++
++void enable_pll1(void)
++{
++	/* pll1 already configured for 1000Mhz, just need to enable it */
++	writel(readl(&stv0991_cgu_regs->pll1_ctrl) & ~(0x01),
++			&stv0991_cgu_regs->pll1_ctrl);
++}
++
++void clock_setup(int peripheral)
++{
++	switch (peripheral) {
++	case UART_CLOCK_CFG:
++		writel(UART_CLK_CFG, &stv0991_cgu_regs->uart_freq);
++		break;
++	case ETH_CLOCK_CFG:
++		enable_pll1();
++		writel(ETH_CLK_CFG, &stv0991_cgu_regs->eth_freq);
++
++		/* Clock selection for ethernet tx_clk & rx_clk*/
++		writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK)
++				| ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl);
++
++		break;
++	default:
++		break;
++	}
++}
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/lowlevel.S u-boot/arch/arm/cpu/armv7/stv0991/lowlevel.S
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/lowlevel.S	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/stv0991/lowlevel.S	2015-01-01 17:34:32.025506990 +0100
+@@ -0,0 +1,12 @@
++/*
++ * (C) Copyright 2014 stmicroelectronics
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <config.h>
++#include <linux/linkage.h>
++
++ENTRY(lowlevel_init)
++	mov	pc, lr
++ENDPROC(lowlevel_init)
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/Makefile u-boot/arch/arm/cpu/armv7/stv0991/Makefile
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/stv0991/Makefile	2015-01-01 17:34:32.025506990 +0100
+@@ -0,0 +1,9 @@
++#
++# (C) Copyright 2014
++# Vikas Manocha, ST Microelectronics, vikas.manocha@stcom
++#
++# SPDX-License-Identifier:	GPL-2.0+
++#
++
++obj-y	:= timer.o clock.o pinmux.o reset.o
++obj-y	+= lowlevel.o
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/pinmux.c u-boot/arch/arm/cpu/armv7/stv0991/pinmux.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/pinmux.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/stv0991/pinmux.c	2015-01-01 17:34:32.025506990 +0100
+@@ -0,0 +1,62 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <asm/io.h>
++#include <asm/arch/stv0991_creg.h>
++#include <asm/arch/stv0991_periph.h>
++#include <asm/arch/hardware.h>
++
++static struct stv0991_creg *const stv0991_creg = \
++			(struct stv0991_creg *)CREG_BASE_ADDR;
++
++int stv0991_pinmux_config(int peripheral)
++{
++	switch (peripheral) {
++	case UART_GPIOC_30_31:
++		/* SSDA/SSCL pad muxing to UART Rx/Dx */
++		writel((readl(&stv0991_creg->mux12) & GPIOC_31_MUX_MASK) |
++				CFG_GPIOC_31_UART_RX,
++				&stv0991_creg->mux12);
++		writel((readl(&stv0991_creg->mux12) & GPIOC_30_MUX_MASK) |
++				CFG_GPIOC_30_UART_TX,
++				&stv0991_creg->mux12);
++		/* SSDA/SSCL pad config to push pull*/
++		writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_31_MODE_MASK) |
++				CFG_GPIOC_31_MODE_PP,
++				&stv0991_creg->cfg_pad6);
++		writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_30_MODE_MASK) |
++				CFG_GPIOC_30_MODE_HIGH,
++				&stv0991_creg->cfg_pad6);
++		break;
++	case UART_GPIOB_16_17:
++		/* ethernet rx_6/7 to UART Rx/Dx */
++		writel((readl(&stv0991_creg->mux7) & GPIOB_17_MUX_MASK) |
++				CFG_GPIOB_17_UART_RX,
++				&stv0991_creg->mux7);
++		writel((readl(&stv0991_creg->mux7) & GPIOB_16_MUX_MASK) |
++				CFG_GPIOB_16_UART_TX,
++				&stv0991_creg->mux7);
++		break;
++	case ETH_GPIOB_10_31_C_0_4:
++		writel(readl(&stv0991_creg->mux6) & 0x000000FF,
++				&stv0991_creg->mux6);
++		writel(0x00000000, &stv0991_creg->mux7);
++		writel(0x00000000, &stv0991_creg->mux8);
++		writel(readl(&stv0991_creg->mux9) & 0xFFF00000,
++				&stv0991_creg->mux9);
++		/* Ethernet Voltage configuration to 1.8V*/
++		writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) |
++				ETH_VDD_CFG, &stv0991_creg->vdd_pad1);
++		writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) |
++				ETH_M_VDD_CFG, &stv0991_creg->vdd_pad1);
++
++		break;
++	default:
++		break;
++	}
++	return 0;
++}
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/reset.c u-boot/arch/arm/cpu/armv7/stv0991/reset.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/reset.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/stv0991/reset.c	2015-01-01 17:34:32.025506990 +0100
+@@ -0,0 +1,26 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/stv0991_wdru.h>
++void reset_cpu(ulong ignored)
++{
++	puts("System is going to reboot ...\n");
++	/*
++	 * This 1 second delay will allow the above message
++	 * to be printed before reset
++	 */
++	udelay((1000 * 1000));
++
++	/* Setting bit 1 of the WDRU unit will reset the SoC */
++	writel(WDRU_RST_SYS, &stv0991_wd_ru_ptr->wdru_ctrl1);
++
++	/* system will restart */
++	while (1)
++		;
++}
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/timer.c u-boot/arch/arm/cpu/armv7/stv0991/timer.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/stv0991/timer.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/stv0991/timer.c	2015-01-01 17:34:32.025506990 +0100
+@@ -0,0 +1,114 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch-stv0991/hardware.h>
++#include <asm/arch-stv0991/stv0991_cgu.h>
++#include <asm/arch-stv0991/stv0991_gpt.h>
++
++static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
++				(struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
++
++#define READ_TIMER()	(readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING)
++#define GPT_RESOLUTION	(CONFIG_STV0991_HZ_CLOCK / CONFIG_STV0991_HZ)
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#define timestamp gd->arch.tbl
++#define lastdec gd->arch.lastinc
++
++int timer_init(void)
++{
++	/* Timer1 clock configuration */
++	writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq);
++	writel(readl(&stv0991_cgu_regs->cgu_enable_2) |
++			TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2);
++
++	/* Stop the timer */
++	writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
++	writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc);
++	/* Configure timer for auto-reload */
++	writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD,
++			&gpt1_regs_ptr->cr1);
++
++	/* load value for free running */
++	writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr);
++
++	/* start timer */
++	writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN,
++			&gpt1_regs_ptr->cr1);
++
++	/* Reset the timer */
++	lastdec = READ_TIMER();
++	timestamp = 0;
++
++	return 0;
++}
++
++/*
++ * timer without interrupts
++ */
++ulong get_timer(ulong base)
++{
++	return (get_timer_masked() / GPT_RESOLUTION) - base;
++}
++
++void __udelay(unsigned long usec)
++{
++	ulong tmo;
++	ulong start = get_timer_masked();
++	ulong tenudelcnt = CONFIG_STV0991_HZ_CLOCK / (1000 * 100);
++	ulong rndoff;
++
++	rndoff = (usec % 10) ? 1 : 0;
++
++	/* tenudelcnt timer tick gives 10 microsecconds delay */
++	tmo = ((usec / 10) + rndoff) * tenudelcnt;
++
++	while ((ulong) (get_timer_masked() - start) < tmo)
++		;
++}
++
++ulong get_timer_masked(void)
++{
++	ulong now = READ_TIMER();
++
++	if (now >= lastdec) {
++		/* normal mode */
++		timestamp += now - lastdec;
++	} else {
++		/* we have an overflow ... */
++		timestamp += now + GPT_FREE_RUNNING - lastdec;
++	}
++	lastdec = now;
++
++	return timestamp;
++}
++
++void udelay_masked(unsigned long usec)
++{
++	return udelay(usec);
++}
++
++/*
++ * This function is derived from PowerPC code (read timebase as long long).
++ * On ARM it just returns the timer value.
++ */
++unsigned long long get_ticks(void)
++{
++	return get_timer(0);
++}
++
++/*
++ * This function is derived from PowerPC code (timebase clock frequency).
++ * On ARM it returns the number of timer ticks per second.
++ */
++ulong get_tbclk(void)
++{
++	return CONFIG_STV0991_HZ;
++}
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/tegra124/Kconfig u-boot/arch/arm/cpu/armv7/tegra124/Kconfig
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/tegra124/Kconfig	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/tegra124/Kconfig	2015-01-01 17:34:32.025506990 +0100
+@@ -6,6 +6,15 @@
+ config TARGET_JETSON_TK1
+ 	bool "NVIDIA Tegra124 Jetson TK1 board"
+ 
++config TARGET_NYAN_BIG
++	bool "Google/NVIDIA Nyan-big Chrombook"
++	help
++	  Nyan Big is a Tegra124 clamshell board that is very similar
++	  to venice2, but it has a different panel, the sdcard CD and WP
++	  sense are flipped, and it has a different revision of the AS3722
++	  PMIC. The retail name is the Acer Chromebook 13 CB5-311-T7NN
++	  (13.3-inch HD, NVIDIA Tegra K1, 2GB).
++
+ config TARGET_VENICE2
+ 	bool "NVIDIA Tegra124 Venice2"
+ 
+@@ -15,6 +24,7 @@
+ 	default "tegra124"
+ 
+ source "board/nvidia/jetson-tk1/Kconfig"
++source "board/nvidia/nyan-big/Kconfig"
+ source "board/nvidia/venice2/Kconfig"
+ 
+ endif
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/uniphier/init_page_table.c u-boot/arch/arm/cpu/armv7/uniphier/init_page_table.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/uniphier/init_page_table.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/uniphier/init_page_table.c	2015-01-01 17:34:32.029506924 +0100
+@@ -17,11 +17,7 @@
+ #define REG	DEVICE	/* IO Register: Device */
+ #define DDR	DEVICE	/* DDR SDRAM: Device */
+ 
+-#ifdef CONFIG_SPL_BUILD
+ #define IS_SPL_TEXT_AREA(x)	((x) == ((CONFIG_SPL_TEXT_BASE) >> 20))
+-#else
+-#define IS_SPL_TEXT_AREA(x)	((x) == ((CONFIG_SYS_TEXT_BASE) >> 20))
+-#endif
+ 
+ #define IS_INIT_STACK_AREA(x)	((x) == ((CONFIG_SYS_INIT_SP_ADDR) >> 20))
+ 
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/armv7/vf610/generic.c u-boot/arch/arm/cpu/armv7/vf610/generic.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/armv7/vf610/generic.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/armv7/vf610/generic.c	2015-01-01 17:34:32.029506924 +0100
+@@ -265,20 +265,21 @@
+ 
+ 	cause = readl(&src_regs->srsr);
+ 	writel(cause, &src_regs->srsr);
+-	cause &= 0xff;
+ 
+-	switch (cause) {
+-	case 0x08:
+-		return "WDOG";
+-	case 0x20:
++	if (cause & SRC_SRSR_POR_RST)
++		return "POWER ON RESET";
++	else if (cause & SRC_SRSR_WDOG_A5)
++		return "WDOG A5";
++	else if (cause & SRC_SRSR_WDOG_M4)
++		return "WDOG M4";
++	else if (cause & SRC_SRSR_JTAG_RST)
+ 		return "JTAG HIGH-Z";
+-	case 0x80:
++	else if (cause & SRC_SRSR_SW_RST)
++		return "SW RESET";
++	else if (cause & SRC_SRSR_RESETB)
+ 		return "EXTERNAL RESET";
+-	case 0xfd:
+-		return "POR";
+-	default:
++	else
+ 		return "unknown reset";
+-	}
+ }
+ 
+ int print_cpuinfo(void)
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/tegra20-common/pmu.c u-boot/arch/arm/cpu/tegra20-common/pmu.c
+--- u-boot-2015.01-rc3/arch/arm/cpu/tegra20-common/pmu.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/tegra20-common/pmu.c	2015-01-01 17:34:32.037506793 +0100
+@@ -6,6 +6,7 @@
+  */
+ 
+ #include <common.h>
++#include <i2c.h>
+ #include <tps6586x.h>
+ #include <asm/io.h>
+ #include <asm/arch/tegra.h>
+@@ -23,9 +24,13 @@
+ #define VDD_TRANSITION_STEP	0x06	/* 150mv */
+ #define VDD_TRANSITION_RATE	0x06	/* 3.52mv/us */
+ 
++#define PMI_I2C_ADDRESS	0x34	/* chip requires this address */
++
+ int pmu_set_nominal(void)
+ {
+-	int core, cpu, bus;
++	struct udevice *bus, *dev;
++	int core, cpu;
++	int ret;
+ 
+ 	/* by default, the table has been filled with T25 settings */
+ 	switch (tegra_get_chip_sku()) {
+@@ -42,12 +47,18 @@
+ 		return -1;
+ 	}
+ 
+-	bus = tegra_i2c_get_dvc_bus_num();
+-	if (bus == -1) {
++	ret = tegra_i2c_get_dvc_bus(&bus);
++	if (ret) {
+ 		debug("%s: Cannot find DVC I2C bus\n", __func__);
+-		return -1;
++		return ret;
+ 	}
+-	tps6586x_init(bus);
++	ret = i2c_get_chip(bus, PMI_I2C_ADDRESS, &dev);
++	if (ret) {
++		debug("%s: Cannot find DVC I2C chip\n", __func__);
++		return ret;
++	}
++
++	tps6586x_init(dev);
+ 	tps6586x_set_pwm_mode(TPS6586X_PWM_SM1);
+ 	return tps6586x_adjust_sm0_sm1(core, cpu, VDD_TRANSITION_STEP,
+ 				VDD_TRANSITION_RATE, VDD_RELATION);
+diff -ruN u-boot-2015.01-rc3/arch/arm/cpu/u-boot-spl.lds u-boot/arch/arm/cpu/u-boot-spl.lds
+--- u-boot-2015.01-rc3/arch/arm/cpu/u-boot-spl.lds	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/cpu/u-boot-spl.lds	2015-01-01 17:34:32.037506793 +0100
+@@ -32,6 +32,9 @@
+ 	}
+ 
+ 	. = ALIGN(4);
++	.u_boot_list : {
++		KEEP(*(SORT(.u_boot_list*_i2c_*)));
++	}
+ 
+ 	. = .;
+ #ifdef CONFIG_SPL_DM
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/cros-ec-keyboard.dtsi u-boot/arch/arm/dts/cros-ec-keyboard.dtsi
+--- u-boot-2015.01-rc3/arch/arm/dts/cros-ec-keyboard.dtsi	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/dts/cros-ec-keyboard.dtsi	2015-01-01 17:34:32.037506793 +0100
+@@ -0,0 +1,105 @@
++/*
++ * Keyboard dts fragment for devices that use cros-ec-keyboard
++ *
++ * Copyright (c) 2014 Google, Inc
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++*/
++
++#include <dt-bindings/input/input.h>
++
++&cros_ec {
++	keyboard-controller {
++		compatible = "google,cros-ec-keyb";
++		keypad,num-rows = <8>;
++		keypad,num-columns = <13>;
++		google,needs-ghost-filter;
++
++		linux,keymap = <
++			MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
++			MATRIX_KEY(0x00, 0x02, KEY_F1)
++			MATRIX_KEY(0x00, 0x03, KEY_B)
++			MATRIX_KEY(0x00, 0x04, KEY_F10)
++			MATRIX_KEY(0x00, 0x06, KEY_N)
++			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
++			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
++
++			MATRIX_KEY(0x01, 0x01, KEY_ESC)
++			MATRIX_KEY(0x01, 0x02, KEY_F4)
++			MATRIX_KEY(0x01, 0x03, KEY_G)
++			MATRIX_KEY(0x01, 0x04, KEY_F7)
++			MATRIX_KEY(0x01, 0x06, KEY_H)
++			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
++			MATRIX_KEY(0x01, 0x09, KEY_F9)
++			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
++
++			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
++			MATRIX_KEY(0x02, 0x01, KEY_TAB)
++			MATRIX_KEY(0x02, 0x02, KEY_F3)
++			MATRIX_KEY(0x02, 0x03, KEY_T)
++			MATRIX_KEY(0x02, 0x04, KEY_F6)
++			MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
++			MATRIX_KEY(0x02, 0x06, KEY_Y)
++			MATRIX_KEY(0x02, 0x07, KEY_102ND)
++			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
++			MATRIX_KEY(0x02, 0x09, KEY_F8)
++
++			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
++			MATRIX_KEY(0x03, 0x02, KEY_F2)
++			MATRIX_KEY(0x03, 0x03, KEY_5)
++			MATRIX_KEY(0x03, 0x04, KEY_F5)
++			MATRIX_KEY(0x03, 0x06, KEY_6)
++			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
++			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
++
++			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
++			MATRIX_KEY(0x04, 0x01, KEY_A)
++			MATRIX_KEY(0x04, 0x02, KEY_D)
++			MATRIX_KEY(0x04, 0x03, KEY_F)
++			MATRIX_KEY(0x04, 0x04, KEY_S)
++			MATRIX_KEY(0x04, 0x05, KEY_K)
++			MATRIX_KEY(0x04, 0x06, KEY_J)
++			MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
++			MATRIX_KEY(0x04, 0x09, KEY_L)
++			MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
++			MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
++
++			MATRIX_KEY(0x05, 0x01, KEY_Z)
++			MATRIX_KEY(0x05, 0x02, KEY_C)
++			MATRIX_KEY(0x05, 0x03, KEY_V)
++			MATRIX_KEY(0x05, 0x04, KEY_X)
++			MATRIX_KEY(0x05, 0x05, KEY_COMMA)
++			MATRIX_KEY(0x05, 0x06, KEY_M)
++			MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
++			MATRIX_KEY(0x05, 0x08, KEY_SLASH)
++			MATRIX_KEY(0x05, 0x09, KEY_DOT)
++			MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
++
++			MATRIX_KEY(0x06, 0x01, KEY_1)
++			MATRIX_KEY(0x06, 0x02, KEY_3)
++			MATRIX_KEY(0x06, 0x03, KEY_4)
++			MATRIX_KEY(0x06, 0x04, KEY_2)
++			MATRIX_KEY(0x06, 0x05, KEY_8)
++			MATRIX_KEY(0x06, 0x06, KEY_7)
++			MATRIX_KEY(0x06, 0x08, KEY_0)
++			MATRIX_KEY(0x06, 0x09, KEY_9)
++			MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
++			MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
++			MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
++
++			MATRIX_KEY(0x07, 0x01, KEY_Q)
++			MATRIX_KEY(0x07, 0x02, KEY_E)
++			MATRIX_KEY(0x07, 0x03, KEY_R)
++			MATRIX_KEY(0x07, 0x04, KEY_W)
++			MATRIX_KEY(0x07, 0x05, KEY_I)
++			MATRIX_KEY(0x07, 0x06, KEY_U)
++			MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
++			MATRIX_KEY(0x07, 0x08, KEY_P)
++			MATRIX_KEY(0x07, 0x09, KEY_O)
++			MATRIX_KEY(0x07, 0x0b, KEY_UP)
++			MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
++		>;
++	};
++};
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/arm/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/arm/dts/include/dt-bindings/reset/altr,rst-mgr.h
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/Makefile u-boot/arch/arm/dts/Makefile
+--- u-boot-2015.01-rc3/arch/arm/dts/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/dts/Makefile	2015-01-01 17:34:32.037506793 +0100
+@@ -31,6 +31,7 @@
+ 	tegra30-tec-ng.dtb \
+ 	tegra114-dalmore.dtb \
+ 	tegra124-jetson-tk1.dtb \
++	tegra124-nyan-big.dtb \
+ 	tegra124-venice2.dtb
+ dtb-$(CONFIG_ARCH_UNIPHIER) += \
+ 	uniphier-ph1-sld3-ref.dtb \
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5.dtsi u-boot/arch/arm/dts/socfpga_cyclone5.dtsi
+--- u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5.dtsi	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/dts/socfpga_cyclone5.dtsi	2015-01-01 17:34:32.041506727 +0100
+@@ -1,18 +1,7 @@
+ /*
+  *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+  *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
++ * SPDX-License-Identifier:	GPL-2.0+
+  */
+ 
+ /dts-v1/;
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5_socrates.dts u-boot/arch/arm/dts/socfpga_cyclone5_socrates.dts
+--- u-boot-2015.01-rc3/arch/arm/dts/socfpga_cyclone5_socrates.dts	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/dts/socfpga_cyclone5_socrates.dts	2015-01-01 17:34:32.041506727 +0100
+@@ -1,18 +1,7 @@
+ /*
+  *  Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+  *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
++ * SPDX-License-Identifier:	GPL-2.0+
+  */
+ 
+ #include "socfpga_cyclone5.dtsi"
+@@ -25,6 +14,12 @@
+ 		bootargs = "console=ttyS0,115200";
+ 	};
+ 
++ 	aliases {
++		spi0 = "/spi@ff705000";		/* QSPI */
++		spi1 = "/spi@fff00000";
++		spi2 = "/spi@fff01000";
++ 	};
++
+ 	memory {
+ 		name = "memory";
+ 		device_type = "memory";
+@@ -48,3 +43,23 @@
+ &mmc {
+ 	status = "okay";
+ };
++
++&qspi {
++	status = "okay";
++
++	flash0: n25q00@0 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "n25q00";
++		reg = <0>;      /* chip select */
++		spi-max-frequency = <50000000>;
++		m25p,fast-read;
++		page-size = <256>;
++		block-size = <16>; /* 2^16, 64KB */
++		read-delay = <4>;  /* delay value in read data capture register */
++		tshsl-ns = <50>;
++		tsd2d-ns = <50>;
++		tchsh-ns = <4>;
++		tslch-ns = <4>;
++	};
++};
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/socfpga.dtsi u-boot/arch/arm/dts/socfpga.dtsi
+--- u-boot-2015.01-rc3/arch/arm/dts/socfpga.dtsi	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/dts/socfpga.dtsi	2015-01-01 17:34:32.041506727 +0100
+@@ -1,18 +1,7 @@
+ /*
+  *  Copyright (C) 2012 Altera <www.altera.com>
+  *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
++ * SPDX-License-Identifier:	GPL-2.0+
+  */
+ 
+ #include "skeleton.dtsi"
+@@ -639,6 +628,49 @@
+ 			clock-names = "biu", "ciu";
+ 		};
+ 
++		qspi: spi@ff705000 {
++			compatible = "cadence,qspi";
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0xff705000 0x1000>,
++				<0xffa00000 0x1000>;
++			interrupts = <0 151 4>;
++			clocks = <&qspi_clk>;
++			ext-decoder = <0>;  /* external decoder */
++			num-chipselect = <4>;
++			fifo-depth = <128>;
++			bus-num = <2>;
++			status = "disabled";
++		};
++
++		spi0: spi@fff00000 {
++			compatible = "snps,dw-spi-mmio";
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0xfff00000 0x1000>;
++			interrupts = <0 154 4>;
++			num-chipselect = <4>;
++			bus-num = <0>;
++			tx-dma-channel = <&pdma 16>;
++			rx-dma-channel = <&pdma 17>;
++			clocks = <&per_base_clk>;
++			status = "disabled";
++		};
++
++		spi1: spi@fff01000 {
++			compatible = "snps,dw-spi-mmio";
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0xfff01000 0x1000>;
++			interrupts = <0 156 4>;
++			num-chipselect = <4>;
++			bus-num = <1>;
++			tx-dma-channel = <&pdma 20>;
++			rx-dma-channel = <&pdma 21>;
++			clocks = <&per_base_clk>;
++			status = "disabled";
++		};
++
+ 		/* Local timer */
+ 		timer@fffec600 {
+ 			compatible = "arm,cortex-a9-twd-timer";
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra124.dtsi u-boot/arch/arm/dts/tegra124.dtsi
+--- u-boot-2015.01-rc3/arch/arm/dts/tegra124.dtsi	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/dts/tegra124.dtsi	2015-01-01 17:34:32.041506727 +0100
+@@ -1,5 +1,6 @@
+ #include <dt-bindings/clock/tegra124-car.h>
+ #include <dt-bindings/gpio/tegra-gpio.h>
++#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ 
+ #include "skeleton.dtsi"
+@@ -192,6 +193,16 @@
+ 		status = "disabled";
+ 	};
+ 
++	pwm: pwm@7000a000 {
++		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
++		reg = <0x7000a000 0x100>;
++		#pwm-cells = <2>;
++		clocks = <&tegra_car TEGRA124_CLK_PWM>;
++		resets = <&tegra_car 17>;
++		reset-names = "pwm";
++		status = "disabled";
++	};
++
+ 	spi@7000d400 {
+ 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+ 		reg = <0x7000d400 0x200>;
+@@ -290,6 +301,109 @@
+ 		status = "disabled";
+ 	};
+ 
++	ahub@70300000 {
++		compatible = "nvidia,tegra124-ahub";
++		reg = <0x70300000 0x200>,
++		      <0x70300800 0x800>,
++		      <0x70300200 0x600>;
++		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
++		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
++			 <&tegra_car TEGRA124_CLK_APBIF>;
++		clock-names = "d_audio", "apbif";
++		resets = <&tegra_car 106>, /* d_audio */
++			 <&tegra_car 107>, /* apbif */
++			 <&tegra_car 30>,  /* i2s0 */
++			 <&tegra_car 11>,  /* i2s1 */
++			 <&tegra_car 18>,  /* i2s2 */
++			 <&tegra_car 101>, /* i2s3 */
++			 <&tegra_car 102>, /* i2s4 */
++			 <&tegra_car 108>, /* dam0 */
++			 <&tegra_car 109>, /* dam1 */
++			 <&tegra_car 110>, /* dam2 */
++			 <&tegra_car 10>,  /* spdif */
++			 <&tegra_car 153>, /* amx */
++			 <&tegra_car 185>, /* amx1 */
++			 <&tegra_car 154>, /* adx */
++			 <&tegra_car 180>, /* adx1 */
++			 <&tegra_car 186>, /* afc0 */
++			 <&tegra_car 187>, /* afc1 */
++			 <&tegra_car 188>, /* afc2 */
++			 <&tegra_car 189>, /* afc3 */
++			 <&tegra_car 190>, /* afc4 */
++			 <&tegra_car 191>; /* afc5 */
++		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
++			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
++			      "spdif", "amx", "amx1", "adx", "adx1",
++			      "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
++		dmas = <&apbdma 1>, <&apbdma 1>,
++		       <&apbdma 2>, <&apbdma 2>,
++		       <&apbdma 3>, <&apbdma 3>,
++		       <&apbdma 4>, <&apbdma 4>,
++		       <&apbdma 6>, <&apbdma 6>,
++		       <&apbdma 7>, <&apbdma 7>,
++		       <&apbdma 12>, <&apbdma 12>,
++		       <&apbdma 13>, <&apbdma 13>,
++		       <&apbdma 14>, <&apbdma 14>,
++		       <&apbdma 29>, <&apbdma 29>;
++		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
++			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
++			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
++			    "rx9", "tx9";
++		ranges;
++		#address-cells = <1>;
++		#size-cells = <1>;
++
++		tegra_i2s0: i2s@70301000 {
++			compatible = "nvidia,tegra124-i2s";
++			reg = <0x70301000 0x100>;
++			nvidia,ahub-cif-ids = <4 4>;
++			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
++			resets = <&tegra_car 30>;
++			reset-names = "i2s";
++			status = "disabled";
++		};
++
++		tegra_i2s1: i2s@70301100 {
++			compatible = "nvidia,tegra124-i2s";
++			reg = <0x70301100 0x100>;
++			nvidia,ahub-cif-ids = <5 5>;
++			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
++			resets = <&tegra_car 11>;
++			reset-names = "i2s";
++			status = "disabled";
++		};
++
++		tegra_i2s2: i2s@70301200 {
++			compatible = "nvidia,tegra124-i2s";
++			reg = <0x70301200 0x100>;
++			nvidia,ahub-cif-ids = <6 6>;
++			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
++			resets = <&tegra_car 18>;
++			reset-names = "i2s";
++			status = "disabled";
++		};
++
++		tegra_i2s3: i2s@70301300 {
++			compatible = "nvidia,tegra124-i2s";
++			reg = <0x70301300 0x100>;
++			nvidia,ahub-cif-ids = <7 7>;
++			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
++			resets = <&tegra_car 101>;
++			reset-names = "i2s";
++			status = "disabled";
++		};
++
++		tegra_i2s4: i2s@70301400 {
++			compatible = "nvidia,tegra124-i2s";
++			reg = <0x70301400 0x100>;
++			nvidia,ahub-cif-ids = <8 8>;
++			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
++			resets = <&tegra_car 102>;
++			reset-names = "i2s";
++			status = "disabled";
++		};
++	};
++
+ 	usb@7d000000 {
+ 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+ 		reg = <0x7d000000 0x4000>;
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra124-jetson-tk1.dts u-boot/arch/arm/dts/tegra124-jetson-tk1.dts
+--- u-boot-2015.01-rc3/arch/arm/dts/tegra124-jetson-tk1.dts	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/dts/tegra124-jetson-tk1.dts	2015-01-01 17:34:32.041506727 +0100
+@@ -16,7 +16,6 @@
+ 		i2c2 = "/i2c@7000c400";
+ 		i2c3 = "/i2c@7000c500";
+ 		i2c4 = "/i2c@7000c700";
+-		i2c5 = "/i2c@7000d100";
+ 		sdhci0 = "/sdhci@700b0600";
+ 		sdhci1 = "/sdhci@700b0400";
+ 		spi0 = "/spi@7000d400";
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra124-nyan-big.dts u-boot/arch/arm/dts/tegra124-nyan-big.dts
+--- u-boot-2015.01-rc3/arch/arm/dts/tegra124-nyan-big.dts	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/dts/tegra124-nyan-big.dts	2015-01-01 17:34:32.041506727 +0100
+@@ -0,0 +1,365 @@
++/dts-v1/;
++
++#include <dt-bindings/input/input.h>
++#include "tegra124.dtsi"
++
++/ {
++	model = "Acer Chromebook 13 CB5-311";
++	compatible = "google,nyan-big", "nvidia,tegra124";
++
++	aliases {
++		console = &uarta;
++		i2c0 = "/i2c@7000d000";
++		i2c1 = "/i2c@7000c000";
++		i2c2 = "/i2c@7000c400";
++		i2c3 = "/i2c@7000c500";
++		i2c4 = "/i2c@7000c700";
++		i2c5 = "/i2c@7000d100";
++		rtc0 = "/i2c@0,7000d000/pmic@40";
++		rtc1 = "/rtc@0,7000e000";
++		sdhci0 = "/sdhci@700b0600";
++		sdhci1 = "/sdhci@700b0400";
++		spi0 = "/spi@7000d400";
++		spi1 = "/spi@7000da00";
++		usb0 = "/usb@7d000000";
++		usb1 = "/usb@7d008000";
++	};
++
++	memory {
++		reg = <0x80000000 0x80000000>;
++	};
++
++	serial@70006000 {
++		/* Debug connector on the bottom of the board near SD card. */
++		status = "okay";
++	};
++
++	pwm@7000a000 {
++		status = "okay";
++	};
++
++	i2c@7000c000 {
++		status = "okay";
++		clock-frequency = <100000>;
++
++		acodec: audio-codec@10 {
++			compatible = "maxim,max98090";
++			reg = <0x10>;
++			interrupt-parent = <&gpio>;
++			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
++		};
++
++		temperature-sensor@4c {
++			compatible = "ti,tmp451";
++			reg = <0x4c>;
++			interrupt-parent = <&gpio>;
++			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
++
++			#thermal-sensor-cells = <1>;
++		};
++	};
++
++	i2c@7000c400 {
++		status = "okay";
++		clock-frequency = <100000>;
++	};
++
++	i2c@7000c500 {
++		status = "okay";
++		clock-frequency = <400000>;
++
++		tpm@20 {
++			compatible = "infineon,slb9645tt";
++			reg = <0x20>;
++		};
++	};
++
++	hdmi_ddc: i2c@7000c700 {
++		status = "okay";
++		clock-frequency = <100000>;
++	};
++
++	i2c@7000d000 {
++		status = "okay";
++		clock-frequency = <400000>;
++
++		pmic: pmic@40 {
++			compatible = "ams,as3722";
++			reg = <0x40>;
++			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
++
++			ams,system-power-controller;
++
++			#interrupt-cells = <2>;
++			interrupt-controller;
++
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			pinctrl-names = "default";
++			pinctrl-0 = <&as3722_default>;
++
++			as3722_default: pinmux {
++				gpio0 {
++					pins = "gpio0";
++					function = "gpio";
++					bias-pull-down;
++				};
++
++				gpio1 {
++					pins = "gpio1";
++					function = "gpio";
++					bias-pull-up;
++				};
++
++				gpio2_4_7 {
++					pins = "gpio2", "gpio4", "gpio7";
++					function = "gpio";
++					bias-pull-up;
++				};
++
++				gpio3_6 {
++					pins = "gpio3", "gpio6";
++					bias-high-impedance;
++				};
++
++				gpio5 {
++					pins = "gpio5";
++					function = "clk32k-out";
++					bias-pull-down;
++				};
++			};
++		};
++	};
++
++	spi@7000d400 {
++		status = "okay";
++
++		cros_ec: cros-ec@0 {
++			compatible = "google,cros-ec-spi";
++			spi-max-frequency = <3000000>;
++			interrupt-parent = <&gpio>;
++			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
++			reg = <0>;
++
++			google,cros-ec-spi-msg-delay = <2000>;
++
++			i2c-tunnel {
++				compatible = "google,cros-ec-i2c-tunnel";
++				#address-cells = <1>;
++				#size-cells = <0>;
++
++				google,remote-bus = <0>;
++
++				charger: bq24735@9 {
++					compatible = "ti,bq24735";
++					reg = <0x9>;
++					interrupt-parent = <&gpio>;
++					interrupts = <TEGRA_GPIO(J, 0)
++							GPIO_ACTIVE_HIGH>;
++					ti,ac-detect-gpios = <&gpio
++							TEGRA_GPIO(J, 0)
++							GPIO_ACTIVE_HIGH>;
++				};
++
++				battery: sbs-battery@b {
++					compatible = "sbs,sbs-battery";
++					reg = <0xb>;
++					sbs,i2c-retry-count = <2>;
++					sbs,poll-retry-count = <10>;
++					power-supplies = <&charger>;
++				};
++			};
++		};
++	};
++
++	spi@7000da00 {
++		status = "okay";
++		spi-max-frequency = <25000000>;
++
++		flash@0 {
++			compatible = "winbond,w25q32dw";
++			reg = <0>;
++		};
++	};
++
++	pmc@7000e400 {
++		nvidia,invert-interrupt;
++		nvidia,suspend-mode = <0>;
++		nvidia,cpu-pwr-good-time = <500>;
++		nvidia,cpu-pwr-off-time = <300>;
++		nvidia,core-pwr-good-time = <641 3845>;
++		nvidia,core-pwr-off-time = <61036>;
++		nvidia,core-power-req-active-high;
++		nvidia,sys-clock-req-active-high;
++	};
++
++	hda@70030000 {
++		status = "okay";
++	};
++
++	sdhci@700b0000 { /* WiFi/BT on this bus */
++		status = "okay";
++		power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
++		bus-width = <4>;
++		no-1-8-v;
++		non-removable;
++	};
++
++	sdhci@700b0400 { /* SD Card on this bus */
++		status = "okay";
++		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
++		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
++		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
++		bus-width = <4>;
++		no-1-8-v;
++	};
++
++	sdhci@700b0600 { /* eMMC on this bus */
++		status = "okay";
++		bus-width = <8>;
++		no-1-8-v;
++		non-removable;
++	};
++
++	ahub@70300000 {
++		i2s@70301100 {
++			status = "okay";
++		};
++	};
++
++	usb@7d000000 { /* Rear external USB port. */
++		status = "okay";
++	};
++
++	usb-phy@7d000000 {
++		status = "okay";
++	};
++
++	usb@7d004000 { /* Internal webcam. */
++		status = "okay";
++	};
++
++	usb-phy@7d004000 {
++		status = "okay";
++	};
++
++	usb@7d008000 { /* Left external USB port. */
++		status = "okay";
++	};
++
++	usb-phy@7d008000 {
++		status = "okay";
++	};
++
++	backlight: backlight {
++		compatible = "pwm-backlight";
++
++		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
++		pwms = <&pwm 1 1000000>;
++
++		default-brightness-level = <224>;
++		brightness-levels =
++			<  0   1   2   3   4   5   6   7
++			   8   9  10  11  12  13  14  15
++			  16  17  18  19  20  21  22  23
++			  24  25  26  27  28  29  30  31
++			  32  33  34  35  36  37  38  39
++			  40  41  42  43  44  45  46  47
++			  48  49  50  51  52  53  54  55
++			  56  57  58  59  60  61  62  63
++			  64  65  66  67  68  69  70  71
++			  72  73  74  75  76  77  78  79
++			  80  81  82  83  84  85  86  87
++			  88  89  90  91  92  93  94  95
++			  96  97  98  99 100 101 102 103
++			 104 105 106 107 108 109 110 111
++			 112 113 114 115 116 117 118 119
++			 120 121 122 123 124 125 126 127
++			 128 129 130 131 132 133 134 135
++			 136 137 138 139 140 141 142 143
++			 144 145 146 147 148 149 150 151
++			 152 153 154 155 156 157 158 159
++			 160 161 162 163 164 165 166 167
++			 168 169 170 171 172 173 174 175
++			 176 177 178 179 180 181 182 183
++			 184 185 186 187 188 189 190 191
++			 192 193 194 195 196 197 198 199
++			 200 201 202 203 204 205 206 207
++			 208 209 210 211 212 213 214 215
++			 216 217 218 219 220 221 222 223
++			 224 225 226 227 228 229 230 231
++			 232 233 234 235 236 237 238 239
++			 240 241 242 243 244 245 246 247
++			 248 249 250 251 252 253 254 255
++			 256>;
++	};
++
++	clocks {
++		compatible = "simple-bus";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		clk32k_in: clock@0 {
++			compatible = "fixed-clock";
++			reg = <0>;
++			#clock-cells = <0>;
++			clock-frequency = <32768>;
++		};
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		lid {
++			label = "Lid";
++			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
++			linux,input-type = <5>;
++			linux,code = <KEY_RESERVED>;
++			debounce-interval = <1>;
++			gpio-key,wakeup;
++		};
++
++		power {
++			label = "Power";
++			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_POWER>;
++			debounce-interval = <30>;
++			gpio-key,wakeup;
++		};
++	};
++
++	panel: panel {
++		compatible = "auo,b133xtn01";
++
++		backlight = <&backlight>;
++	};
++
++	sound {
++		compatible = "nvidia,tegra-audio-max98090-nyan-big",
++			     "nvidia,tegra-audio-max98090";
++		nvidia,model = "Acer Chromebook 13";
++
++		nvidia,audio-routing =
++			"Headphones", "HPR",
++			"Headphones", "HPL",
++			"Speakers", "SPKR",
++			"Speakers", "SPKL",
++			"Mic Jack", "MICBIAS",
++			"DMICL", "Int Mic",
++			"DMICR", "Int Mic",
++			"IN34", "Mic Jack";
++
++		nvidia,i2s-controller = <&tegra_i2s1>;
++		nvidia,audio-codec = <&acodec>;
++
++		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
++			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
++			 <&tegra_car TEGRA124_CLK_EXTERN1>;
++		clock-names = "pll_a", "pll_a_out0", "mclk";
++
++		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
++	};
++};
++
++#include "cros-ec-keyboard.dtsi"
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/tegra30-tec-ng.dts u-boot/arch/arm/dts/tegra30-tec-ng.dts
+--- u-boot-2015.01-rc3/arch/arm/dts/tegra30-tec-ng.dts	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/dts/tegra30-tec-ng.dts	2015-01-01 17:34:32.045506662 +0100
+@@ -6,6 +6,10 @@
+ 	model = "Avionic Design Tamonten™ NG Evaluation Carrier";
+ 	compatible = "ad,tec-ng", "nvidia,tegra30";
+ 
++	aliases {
++		i2c0 = "/i2c@7000c400";
++	};
++
+ 	/* GEN2 */
+ 	i2c@7000c400 {
+ 		status = "okay";
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-ld4-ref.dts u-boot/arch/arm/dts/uniphier-ph1-ld4-ref.dts
+--- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-ld4-ref.dts	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/dts/uniphier-ph1-ld4-ref.dts	2015-01-01 17:34:32.045506662 +0100
+@@ -25,10 +25,10 @@
+ 	};
+ 
+ 	aliases {
+-		uart0 = &uart0;
+-		uart1 = &uart1;
+-		uart2 = &uart2;
+-		uart3 = &uart3;
++		serial0 = &uart0;
++		serial1 = &uart1;
++		serial2 = &uart2;
++		serial3 = &uart3;
+ 		i2c0 = &i2c0;
+ 		i2c1 = &i2c1;
+ 		i2c2 = &i2c2;
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-pro4-ref.dts u-boot/arch/arm/dts/uniphier-ph1-pro4-ref.dts
+--- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-pro4-ref.dts	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/dts/uniphier-ph1-pro4-ref.dts	2015-01-01 17:34:32.045506662 +0100
+@@ -25,10 +25,10 @@
+ 	};
+ 
+ 	aliases {
+-		uart0 = &uart0;
+-		uart1 = &uart1;
+-		uart2 = &uart2;
+-		uart3 = &uart3;
++		serial0 = &uart0;
++		serial1 = &uart1;
++		serial2 = &uart2;
++		serial3 = &uart3;
+ 		i2c0 = &i2c0;
+ 		i2c1 = &i2c1;
+ 		i2c2 = &i2c2;
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld3-ref.dts u-boot/arch/arm/dts/uniphier-ph1-sld3-ref.dts
+--- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld3-ref.dts	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/dts/uniphier-ph1-sld3-ref.dts	2015-01-01 17:34:32.045506662 +0100
+@@ -25,9 +25,9 @@
+ 	};
+ 
+ 	aliases {
+-		uart0 = &uart0;
+-		uart1 = &uart1;
+-		uart2 = &uart2;
++		serial0 = &uart0;
++		serial1 = &uart1;
++		serial2 = &uart2;
+ 		i2c0 = &i2c0;
+ 		i2c1 = &i2c1;
+ 		i2c2 = &i2c2;
+diff -ruN u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld8-ref.dts u-boot/arch/arm/dts/uniphier-ph1-sld8-ref.dts
+--- u-boot-2015.01-rc3/arch/arm/dts/uniphier-ph1-sld8-ref.dts	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/dts/uniphier-ph1-sld8-ref.dts	2015-01-01 17:34:32.045506662 +0100
+@@ -25,10 +25,10 @@
+ 	};
+ 
+ 	aliases {
+-		uart0 = &uart0;
+-		uart1 = &uart1;
+-		uart2 = &uart2;
+-		uart3 = &uart3;
++		serial0 = &uart0;
++		serial1 = &uart1;
++		serial2 = &uart2;
++		serial3 = &uart3;
+ 		i2c0 = &i2c0;
+ 		i2c1 = &i2c1;
+ 		i2c2 = &i2c2;
+diff -ruN u-boot-2015.01-rc3/arch/arm/imx-common/cpu.c u-boot/arch/arm/imx-common/cpu.c
+--- u-boot-2015.01-rc3/arch/arm/imx-common/cpu.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/imx-common/cpu.c	2015-01-01 17:34:32.045506662 +0100
+@@ -206,6 +206,9 @@
+ {
+ #if defined(CONFIG_CMD_SATA)
+ 	sata_stop();
++#if defined(CONFIG_MX6)
++	disable_sata_clock();
++#endif
+ #endif
+ #if defined(CONFIG_VIDEO_IPUV3)
+ 	/* disable video before launching O/S */
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm281xx/sysmap.h u-boot/arch/arm/include/asm/arch-bcm281xx/sysmap.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm281xx/sysmap.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-bcm281xx/sysmap.h	2015-01-01 17:34:32.053506531 +0100
+@@ -13,6 +13,8 @@
+ #define ESUB_CLK_BASE_ADDR	0x38000000
+ #define ESW_CONTRL_BASE_ADDR	0x38200000
+ #define GPIO2_BASE_ADDR		0x35003000
++#define HSOTG_BASE_ADDR		0x3f120000
++#define HSOTG_CTRL_BASE_ADDR	0x3f130000
+ #define KONA_MST_CLK_BASE_ADDR	0x3f001000
+ #define KONA_SLV_CLK_BASE_ADDR	0x3e011000
+ #define PMU_BSC_BASE_ADDR	0x3500d000
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm2835/mbox.h u-boot/arch/arm/include/asm/arch-bcm2835/mbox.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-bcm2835/mbox.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-bcm2835/mbox.h	2015-01-01 17:34:32.053506531 +0100
+@@ -140,6 +140,7 @@
+ #define BCM2835_BOARD_REV_B_REV2_f	0xf
+ #define BCM2835_BOARD_REV_B_PLUS	0x10
+ #define BCM2835_BOARD_REV_CM		0x11
++#define BCM2835_BOARD_REV_A_PLUS	0x12
+ 
+ struct bcm2835_mbox_tag_get_board_rev {
+ 	struct bcm2835_mbox_tag_hdr tag_hdr;
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/config.h u-boot/arch/arm/include/asm/arch-ls102xa/config.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/config.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-ls102xa/config.h	2015-01-01 17:34:32.065506333 +0100
+@@ -11,11 +11,17 @@
+ 
+ #define OCRAM_BASE_ADDR				0x10000000
+ #define OCRAM_SIZE				0x00020000
++#define OCRAM_BASE_S_ADDR			0x10010000
++#define OCRAM_S_SIZE				0x00010000
+ 
+ #define CONFIG_SYS_IMMR				0x01000000
++#define CONFIG_SYS_DCSRBAR			0x20000000
++
++#define CONFIG_SYS_DCSR_DCFG_ADDR	(CONFIG_SYS_DCSRBAR + 0x00220000)
+ 
+ #define CONFIG_SYS_FSL_DDR_ADDR			(CONFIG_SYS_IMMR + 0x00080000)
+ #define CONFIG_SYS_CCI400_ADDR			(CONFIG_SYS_IMMR + 0x00180000)
++#define CONFIG_SYS_FSL_CSU_ADDR                 (CONFIG_SYS_IMMR + 0x00510000)
+ #define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x00530000)
+ #define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x00560000)
+ #define CONFIG_SYS_FSL_SCFG_ADDR		(CONFIG_SYS_IMMR + 0x00570000)
+@@ -52,6 +58,9 @@
+ 
+ #define LPUART_BASE				(CONFIG_SYS_IMMR + 0x01950000)
+ 
++#define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
++#define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
++
+ #ifdef CONFIG_DDR_SPD
+ #define CONFIG_SYS_FSL_DDR_BE
+ #define CONFIG_VERY_BIG_RAM
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h u-boot/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h	2015-01-01 17:34:32.065506333 +0100
+@@ -17,6 +17,9 @@
+ #define SOC_VER_LS1021		0x11
+ #define SOC_VER_LS1022		0x12
+ 
++#define CCSR_BRR_OFFSET		0xe4
++#define CCSR_SCRATCHRW1_OFFSET	0x200
++
+ #define RCWSR0_SYS_PLL_RAT_SHIFT	25
+ #define RCWSR0_SYS_PLL_RAT_MASK		0x1f
+ #define RCWSR0_MEM_PLL_RAT_SHIFT	16
+@@ -29,6 +32,11 @@
+ #define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
+ #define SYS_COUNTER_CTRL_ENABLE		(1 << 24)
+ 
++#define DCFG_CCSR_PORSR1_RCW_MASK	0xff800000
++#define DCFG_CCSR_PORSR1_RCW_SRC_I2C	0x24800000
++
++#define DCFG_DCSR_PORCR1		0
++
+ struct sys_info {
+ 	unsigned long freq_processor[CONFIG_MAX_CPUS];
+ 	unsigned long freq_systembus;
+@@ -98,6 +106,7 @@
+ #define SCFG_ETSECDMAMCR_LE_BD_FR	0xf8001a0f
+ #define SCFG_ETSECCMCR_GE2_CLK125	0x04000000
+ #define SCFG_PIXCLKCR_PXCKEN		0x80000000
++#define SCFG_QSPI_CLKSEL		0xc0100000
+ 
+ /* Supplemental Configuration Unit */
+ struct ccsr_scfg {
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h	2015-01-01 17:34:32.065506333 +0100
+@@ -0,0 +1,17 @@
++/*
++ * Copyright 2014 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __FSL_LS102XA_STREAM_ID_H_
++#define __FSL_LS102XA_STREAM_ID_H_
++
++struct smmu_stream_id {
++	uint16_t offset;
++	uint16_t stream_id;
++	char dev_name[32];
++};
++
++void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num);
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ns_access.h u-boot/arch/arm/include/asm/arch-ls102xa/ns_access.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/ns_access.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-ls102xa/ns_access.h	2015-01-01 17:34:32.065506333 +0100
+@@ -0,0 +1,118 @@
++/*
++ * Copyright 2014 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __FSL_NS_ACCESS_H_
++#define __FSL_NS_ACCESS_H_
++
++enum csu_cslx_access {
++	CSU_NS_SUP_R = 0x08,
++	CSU_NS_SUP_W = 0x80,
++	CSU_NS_SUP_RW = 0x88,
++	CSU_NS_USER_R = 0x04,
++	CSU_NS_USER_W = 0x40,
++	CSU_NS_USER_RW = 0x44,
++	CSU_S_SUP_R = 0x02,
++	CSU_S_SUP_W = 0x20,
++	CSU_S_SUP_RW = 0x22,
++	CSU_S_USER_R = 0x01,
++	CSU_S_USER_W = 0x10,
++	CSU_S_USER_RW = 0x11,
++	CSU_ALL_RW = 0xff,
++};
++
++enum csu_cslx_ind {
++	CSU_CSLX_PCIE2_IO = 0,
++	CSU_CSLX_PCIE1_IO,
++	CSU_CSLX_MG2TPR_IP,
++	CSU_CSLX_IFC_MEM,
++	CSU_CSLX_OCRAM,
++	CSU_CSLX_GIC,
++	CSU_CSLX_PCIE1,
++	CSU_CSLX_OCRAM2,
++	CSU_CSLX_QSPI_MEM,
++	CSU_CSLX_PCIE2,
++	CSU_CSLX_SATA,
++	CSU_CSLX_USB3,
++	CSU_CSLX_SERDES = 32,
++	CSU_CSLX_QDMA,
++	CSU_CSLX_LPUART2,
++	CSU_CSLX_LPUART1,
++	CSU_CSLX_LPUART4,
++	CSU_CSLX_LPUART3,
++	CSU_CSLX_LPUART6,
++	CSU_CSLX_LPUART5,
++	CSU_CSLX_DSPI2 = 40,
++	CSU_CSLX_DSPI1,
++	CSU_CSLX_QSPI,
++	CSU_CSLX_ESDHC,
++	CSU_CSLX_2D_ACE,
++	CSU_CSLX_IFC,
++	CSU_CSLX_I2C1,
++	CSU_CSLX_USB2,
++	CSU_CSLX_I2C3,
++	CSU_CSLX_I2C2,
++	CSU_CSLX_DUART2 = 50,
++	CSU_CSLX_DUART1,
++	CSU_CSLX_WDT2,
++	CSU_CSLX_WDT1,
++	CSU_CSLX_EDMA,
++	CSU_CSLX_SYS_CNT,
++	CSU_CSLX_DMA_MUX2,
++	CSU_CSLX_DMA_MUX1,
++	CSU_CSLX_DDR,
++	CSU_CSLX_QUICC,
++	CSU_CSLX_DCFG_CCU_RCPM = 60,
++	CSU_CSLX_SECURE_BOOTROM,
++	CSU_CSLX_SFP,
++	CSU_CSLX_TMU,
++	CSU_CSLX_SECURE_MONITOR,
++	CSU_CSLX_RESERVED0,
++	CSU_CSLX_ETSEC1,
++	CSU_CSLX_SEC5_5,
++	CSU_CSLX_ETSEC3,
++	CSU_CSLX_ETSEC2,
++	CSU_CSLX_GPIO2 = 70,
++	CSU_CSLX_GPIO1,
++	CSU_CSLX_GPIO4,
++	CSU_CSLX_GPIO3,
++	CSU_CSLX_PLATFORM_CONT,
++	CSU_CSLX_CSU,
++	CSU_CSLX_ASRC,
++	CSU_CSLX_SPDIF,
++	CSU_CSLX_FLEXCAN2,
++	CSU_CSLX_FLEXCAN1,
++	CSU_CSLX_FLEXCAN4 = 80,
++	CSU_CSLX_FLEXCAN3,
++	CSU_CSLX_SAI2,
++	CSU_CSLX_SAI1,
++	CSU_CSLX_SAI4,
++	CSU_CSLX_SAI3,
++	CSU_CSLX_FTM2,
++	CSU_CSLX_FTM1,
++	CSU_CSLX_FTM4,
++	CSU_CSLX_FTM3,
++	CSU_CSLX_FTM6 = 90,
++	CSU_CSLX_FTM5,
++	CSU_CSLX_FTM8,
++	CSU_CSLX_FTM7,
++	CSU_CSLX_COP_DCSR,
++	CSU_CSLX_EPU,
++	CSU_CSLX_GDI,
++	CSU_CSLX_DDI,
++	CSU_CSLX_RESERVED1,
++	CSU_CSLX_USB3_PHY = 117,
++	CSU_CSLX_RESERVED2,
++	CSU_CSLX_MAX,
++};
++
++struct csu_ns_dev {
++	unsigned long ind;
++	uint32_t val;
++};
++
++void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num);
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/spl.h u-boot/arch/arm/include/asm/arch-ls102xa/spl.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-ls102xa/spl.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-ls102xa/spl.h	2015-01-01 17:34:32.065506333 +0100
+@@ -0,0 +1,20 @@
++/*
++ * Copyright 2014 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __ASM_ARCH_SPL_H__
++#define __ASM_ARCH_SPL_H__
++
++#define BOOT_DEVICE_NONE	0
++#define BOOT_DEVICE_XIP		1
++#define BOOT_DEVICE_XIPWAIT	2
++#define BOOT_DEVICE_NAND	3
++#define BOOT_DEVICE_ONENAND	4
++#define BOOT_DEVICE_MMC1	5
++#define BOOT_DEVICE_MMC2	6
++#define BOOT_DEVICE_MMC2_2	7
++#define BOOT_DEVICE_SPI		10
++
++#endif	/* __ASM_ARCH_SPL_H__ */
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/clock.h u-boot/arch/arm/include/asm/arch-mx6/clock.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/clock.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-mx6/clock.h	2015-01-01 17:34:32.073506203 +0100
+@@ -43,10 +43,10 @@
+ };
+ 
+ enum enet_freq {
+-	ENET_25MHz,
+-	ENET_50MHz,
+-	ENET_100MHz,
+-	ENET_125MHz,
++	ENET_25MHZ,
++	ENET_50MHZ,
++	ENET_100MHZ,
++	ENET_125MHZ,
+ };
+ 
+ u32 imx_get_uartclk(void);
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/mx6sl_pins.h u-boot/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-mx6/mx6sl_pins.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-mx6/mx6sl_pins.h	2015-01-01 17:34:32.073506203 +0100
+@@ -53,5 +53,10 @@
+ 	MX6_PAD_FEC_REF_CLK__FEC_REF_OUT			= IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0),
+ 	MX6_PAD_FEC_RX_ER__GPIO_4_19				= IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0),
+ 	MX6_PAD_FEC_TX_CLK__GPIO_4_21				= IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0),
++
++	MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID			= IOMUX_PAD(0x03D0, 0x00E0, 4, 0x05DC, 0, 0),
++
++	MX6_PAD_KEY_COL4__USB_USBOTG1_PWR			= IOMUX_PAD(0x0484, 0x017C, 6, 0x0000, 0, 0),
++	MX6_PAD_KEY_COL5__USB_USBOTG2_PWR			= IOMUX_PAD(0x0488, 0x0180, 6, 0x0000, 0, 0),
+ };
+ #endif	/* __ASM_ARCH_MX6_MX6SL_PINS_H__ */
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/mmc.h u-boot/arch/arm/include/asm/arch-rmobile/mmc.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/mmc.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-rmobile/mmc.h	2015-01-01 17:34:32.085506005 +0100
+@@ -0,0 +1,14 @@
++/*
++ * Renesas SuperH MMCIF driver.
++ *
++ * Copyright (C)  2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
++ * Copyright (C)  2014 Renesas Electronics Corporation
++ *
++ * SPDX-License-Identifier: GPL-2.0
++ */
++#ifndef _RMOBILE_MMC_H_
++#define _RMOBILE_MMC_H_
++
++int mmcif_mmc_init(void);
++
++#endif /* _RMOBILE_MMC_H_ */
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7790.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7790.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7790.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7790.h	2015-01-01 17:34:32.085506005 +0100
+@@ -15,6 +15,19 @@
+ #define CONFIG_SYS_I2C_SH_BASE2	0xE6520000
+ #define CONFIG_SYS_I2C_SH_BASE3	0xE60B0000
+ 
++/* Module stop control/status register bits */
++#define MSTP0_BITS	0x00640801
++#define MSTP1_BITS	0xDB6E9BDF
++#define MSTP2_BITS	0x300DA1FC
++#define MSTP3_BITS	0xF08CF831
++#define MSTP4_BITS	0x80000184
++#define MSTP5_BITS	0x44C00046
++#define MSTP7_BITS	0x07F30718
++#define MSTP8_BITS	0x01F0FF84
++#define MSTP9_BITS	0xF5979FCF
++#define MSTP10_BITS	0xFFFEFFE0
++#define MSTP11_BITS	0x00000000
++
+ #define R8A7790_CUT_ES2X	2
+ #define IS_R8A7790_ES2()	\
+ 	(rmobile_get_cpu_rev_integer() == R8A7790_CUT_ES2X)
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7791.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7791.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7791.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7791.h	2015-01-01 17:34:32.089505941 +0100
+@@ -51,6 +51,19 @@
+ #define DBSC3_1_QOS_W15_BASE	0xE67A2F00
+ #define DBSC3_1_DBADJ2		0xE67A00C8
+ 
++/* Module stop control/status register bits */
++#define MSTP0_BITS	0x00640801
++#define MSTP1_BITS	0x9B6C9B5A
++#define MSTP2_BITS	0x100D21FC
++#define MSTP3_BITS	0xF08CD810
++#define MSTP4_BITS	0x800001C4
++#define MSTP5_BITS	0x44C00046
++#define MSTP7_BITS	0x05BFE618
++#define MSTP8_BITS	0x40C0FE85
++#define MSTP9_BITS	0xFF979FFF
++#define MSTP10_BITS	0xFFFEFFE0
++#define MSTP11_BITS	0x000001C0
++
+ #define R8A7791_CUT_ES2X	2
+ #define IS_R8A7791_ES2()	\
+ 	(rmobile_get_cpu_rev_integer() == R8A7791_CUT_ES2X)
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7793.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7793.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7793.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7793.h	2015-01-01 17:34:32.089505941 +0100
+@@ -56,6 +56,20 @@
+ /*
+  * R8A7793 I/O Product Information
+  */
++
++/* Module stop control/status register bits */
++#define MSTP0_BITS	0x00640801
++#define MSTP1_BITS	0x9B6C9B5A
++#define MSTP2_BITS	0x100D21FC
++#define MSTP3_BITS	0xF08CD810
++#define MSTP4_BITS	0x800001C4
++#define MSTP5_BITS	0x44C00046
++#define MSTP7_BITS	0x05BFE618
++#define MSTP8_BITS	0x40C0FE85
++#define MSTP9_BITS	0xFF979FFF
++#define MSTP10_BITS	0xFFFEFFE0
++#define MSTP11_BITS	0x000001C0
++
+ #define R8A7793_CUT_ES2X	2
+ #define IS_R8A7793_ES2() \
+ 	(rmobile_get_cpu_rev_integer() == R8A7793_CUT_ES2X)
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7794.h u-boot/arch/arm/include/asm/arch-rmobile/r8a7794.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/r8a7794.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-rmobile/r8a7794.h	2015-01-01 17:34:32.089505941 +0100
+@@ -14,4 +14,17 @@
+ /* SH-I2C */
+ #define CONFIG_SYS_I2C_SH_BASE2	0xE60B0000
+ 
++/* Module stop control/status register bits */
++#define MSTP0_BITS	0x00440801
++#define MSTP1_BITS	0x936899DA
++#define MSTP2_BITS	0x100D21FC
++#define MSTP3_BITS	0xE084D810
++#define MSTP4_BITS	0x800001C4
++#define MSTP5_BITS	0x40C00044
++#define MSTP7_BITS	0x013FE618
++#define MSTP8_BITS	0x40803C05
++#define MSTP9_BITS	0xFB879FEE
++#define MSTP10_BITS	0xFFFEFFE0
++#define MSTP11_BITS	0x000001C0
++
+ #endif /* __ASM_ARCH_R8A7794_H */
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-base.h u-boot/arch/arm/include/asm/arch-rmobile/rcar-base.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-base.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-rmobile/rcar-base.h	2015-01-01 17:34:32.089505941 +0100
+@@ -29,6 +29,45 @@
+ #define SCIF4_BASE		0xE6EE0000
+ #define SCIF5_BASE		0xE6EE8000
+ 
++/* Module stop status register */
++#define MSTPSR0			0xE6150030
++#define MSTPSR1			0xE6150038
++#define MSTPSR2			0xE6150040
++#define MSTPSR3			0xE6150048
++#define MSTPSR4			0xE615004C
++#define MSTPSR5			0xE615003C
++#define MSTPSR7			0xE61501C4
++#define MSTPSR8			0xE61509A0
++#define MSTPSR9			0xE61509A4
++#define MSTPSR10		0xE61509A8
++#define MSTPSR11		0xE61509AC
++
++/* Realtime module stop control register */
++#define RMSTPCR0		0xE6150110
++#define RMSTPCR1		0xE6150114
++#define RMSTPCR2		0xE6150118
++#define RMSTPCR3		0xE615011C
++#define RMSTPCR4		0xE6150120
++#define RMSTPCR5		0xE6150124
++#define RMSTPCR7		0xE615012C
++#define RMSTPCR8		0xE6150980
++#define RMSTPCR9		0xE6150984
++#define RMSTPCR10		0xE6150988
++#define RMSTPCR11		0xE615098C
++
++/* System module stop control register */
++#define SMSTPCR0		0xE6150130
++#define SMSTPCR1		0xE6150134
++#define SMSTPCR2		0xE6150138
++#define SMSTPCR3		0xE615013C
++#define SMSTPCR4		0xE6150140
++#define SMSTPCR5		0xE6150144
++#define SMSTPCR7		0xE615014C
++#define SMSTPCR8		0xE6150990
++#define SMSTPCR9		0xE6150994
++#define SMSTPCR10		0xE6150998
++#define SMSTPCR11		0xE615099C
++
+ /*
+  * SH-I2C
+  * Ch2 and ch3 are different address. These are defined
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-mstp.h u-boot/arch/arm/include/asm/arch-rmobile/rcar-mstp.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-rmobile/rcar-mstp.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-rmobile/rcar-mstp.h	2015-01-01 17:34:32.089505941 +0100
+@@ -0,0 +1,109 @@
++/*
++ * arch/arm/include/asm/arch-rmobile/rcar-mstp.h
++ *
++ * Copyright (C) 2013, 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
++ * Copyright (C) 2013, 2014 Renesas Electronics Corporation
++ *
++ * SPDX-License-Identifier:	GPL-2.0
++ */
++
++#ifndef __ASM_ARCH_RCAR_MSTP_H
++#define __ASM_ARCH_RCAR_MSTP_H
++
++#define mstp_setbits(type, addr, saddr, set) \
++		out_##type((saddr), in_##type(addr) | (set))
++#define mstp_clrbits(type, addr, saddr, clear) \
++		out_##type((saddr), in_##type(addr) & ~(clear))
++#define mstp_setclrbits(type, addr, set, clear) \
++		out_##type((addr), (in_##type(addr) | (set)) & ~(clear))
++#define mstp_setbits_le32(addr, saddr, set) \
++		mstp_setbits(le32, addr, saddr, set)
++#define mstp_clrbits_le32(addr, saddr, clear) \
++		mstp_clrbits(le32, addr, saddr, clear)
++#define mstp_setclrbits_le32(addr, set, clear) \
++		mstp_setclrbits(le32, addr, set, clear)
++
++#ifndef CONFIG_SMSTP0_ENA
++#define CONFIG_SMSTP0_ENA	0x00
++#endif
++#ifndef CONFIG_SMSTP1_ENA
++#define CONFIG_SMSTP1_ENA	0x00
++#endif
++#ifndef CONFIG_SMSTP2_ENA
++#define CONFIG_SMSTP2_ENA	0x00
++#endif
++#ifndef CONFIG_SMSTP3_ENA
++#define CONFIG_SMSTP3_ENA	0x00
++#endif
++#ifndef CONFIG_SMSTP4_ENA
++#define CONFIG_SMSTP4_ENA	0x00
++#endif
++#ifndef CONFIG_SMSTP5_ENA
++#define CONFIG_SMSTP5_ENA	0x00
++#endif
++#ifndef CONFIG_SMSTP6_ENA
++#define CONFIG_SMSTP6_ENA	0x00
++#endif
++#ifndef CONFIG_SMSTP7_ENA
++#define CONFIG_SMSTP7_ENA	0x00
++#endif
++#ifndef CONFIG_SMSTP8_ENA
++#define CONFIG_SMSTP8_ENA	0x00
++#endif
++#ifndef CONFIG_SMSTP9_ENA
++#define CONFIG_SMSTP9_ENA	0x00
++#endif
++#ifndef CONFIG_SMSTP10_ENA
++#define CONFIG_SMSTP10_ENA	0x00
++#endif
++#ifndef CONFIG_SMSTP11_ENA
++#define CONFIG_SMSTP11_ENA	0x00
++#endif
++
++#ifndef CONFIG_RMSTP0_ENA
++#define CONFIG_RMSTP0_ENA	0x00
++#endif
++#ifndef CONFIG_RMSTP1_ENA
++#define CONFIG_RMSTP1_ENA	0x00
++#endif
++#ifndef CONFIG_RMSTP2_ENA
++#define CONFIG_RMSTP2_ENA	0x00
++#endif
++#ifndef CONFIG_RMSTP3_ENA
++#define CONFIG_RMSTP3_ENA	0x00
++#endif
++#ifndef CONFIG_RMSTP4_ENA
++#define CONFIG_RMSTP4_ENA	0x00
++#endif
++#ifndef CONFIG_RMSTP5_ENA
++#define CONFIG_RMSTP5_ENA	0x00
++#endif
++#ifndef CONFIG_RMSTP6_ENA
++#define CONFIG_RMSTP6_ENA	0x00
++#endif
++#ifndef CONFIG_RMSTP7_ENA
++#define CONFIG_RMSTP7_ENA	0x00
++#endif
++#ifndef CONFIG_RMSTP8_ENA
++#define CONFIG_RMSTP8_ENA	0x00
++#endif
++#ifndef CONFIG_RMSTP9_ENA
++#define CONFIG_RMSTP9_ENA	0x00
++#endif
++#ifndef CONFIG_RMSTP10_ENA
++#define CONFIG_RMSTP10_ENA	0x00
++#endif
++#ifndef CONFIG_RMSTP11_ENA
++#define CONFIG_RMSTP11_ENA	0x00
++#endif
++
++struct mstp_ctl {
++	u32 s_addr;
++	u32 s_dis;
++	u32 s_ena;
++	u32 r_addr;
++	u32 r_dis;
++	u32 r_ena;
++};
++
++#endif /* __ASM_ARCH_RCAR_MSTP_H */
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/clock_manager.h u-boot/arch/arm/include/asm/arch-socfpga/clock_manager.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/clock_manager.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-socfpga/clock_manager.h	2015-01-01 17:34:32.089505941 +0100
+@@ -14,6 +14,7 @@
+ unsigned int cm_get_l4_sp_clk_hz(void);
+ unsigned int cm_get_mmc_controller_clk_hz(void);
+ unsigned int cm_get_qspi_controller_clk_hz(void);
++unsigned int cm_get_spi_controller_clk_hz(void);
+ #endif
+ 
+ typedef struct {
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/freeze_controller.h u-boot/arch/arm/include/asm/arch-socfpga/freeze_controller.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/freeze_controller.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-socfpga/freeze_controller.h	2015-01-01 17:34:32.089505941 +0100
+@@ -42,7 +42,6 @@
+ #define SYSMGR_FRZCTRL_HWCTRL_VIO1REQ_MASK 0x00000001
+ #define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_FROZEN 0x2
+ #define SYSMGR_FRZCTRL_HWCTRL_VIO1STATE_ENUM_THAWED 0x1
+-#define SYSMGR_FRZCTRL_VIOCTRL_SHIFT 0x2
+ 
+ void sys_mgr_frzctrl_freeze_req(void);
+ void sys_mgr_frzctrl_thaw_req(void);
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/scan_manager.h u-boot/arch/arm/include/asm/arch-socfpga/scan_manager.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-socfpga/scan_manager.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-socfpga/scan_manager.h	2015-01-01 17:34:32.089505941 +0100
+@@ -13,6 +13,7 @@
+ 	u32	padding[2];
+ 	u32	fifo_single_byte;
+ 	u32	fifo_double_byte;
++	u32	fifo_triple_byte;
+ 	u32	fifo_quad_byte;
+ };
+ 
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/gpio.h u-boot/arch/arm/include/asm/arch-stv0991/gpio.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/gpio.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-stv0991/gpio.h	2015-01-01 17:34:32.093505875 +0100
+@@ -0,0 +1,22 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __ASM_ARCH_STV0991_GPIO_H
++#define __ASM_ARCH_STV0991_GPIO_H
++
++enum gpio_direction {
++	GPIO_DIRECTION_IN,
++	GPIO_DIRECTION_OUT,
++};
++
++struct gpio_regs {
++	u32 data;		/* offset 0x0 */
++	u32 reserved[0xff];	/* 0x4--0x3fc */
++	u32 dir;		/* offset 0x400 */
++};
++
++#endif	/* __ASM_ARCH_STV0991_GPIO_H */
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/hardware.h u-boot/arch/arm/include/asm/arch-stv0991/hardware.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/hardware.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-stv0991/hardware.h	2015-01-01 17:34:32.093505875 +0100
+@@ -0,0 +1,73 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef _ASM_ARCH_HARDWARE_H
++#define _ASM_ARCH_HARDWARE_H
++
++/* STV0991 */
++#define SRAM0_BASE_ADDR                          0x00000000UL
++#define SRAM1_BASE_ADDR                          0x00068000UL
++#define SRAM2_BASE_ADDR                          0x000D0000UL
++#define SRAM3_BASE_ADDR                          0x00138000UL
++#define CFS_SRAM0_BASE_ADDR                      0x00198000UL
++#define CFS_SRAM1_BASE_ADDR                      0x001B8000UL
++#define FAST_SRAM_BASE_ADDR                      0x001D8000UL
++#define FLASH_BASE_ADDR                          0x40000000UL
++#define PL310_BASE_ADDR                          0x70000000UL
++#define HSAXIM_BASE_ADDR                         0x70100000UL
++#define IMGSS_BASE_ADDR                          0x70200000UL
++#define ADC_BASE_ADDR                            0x80000000UL
++#define GPIOA_BASE_ADDR                          0x80001000UL
++#define GPIOB_BASE_ADDR                          0x80002000UL
++#define GPIOC_BASE_ADDR                          0x80003000UL
++#define HDM_BASE_ADDR                            0x80004000UL
++#define THSENS_BASE_ADDR                         0x80200000UL
++#define GPTIMER2_BASE_ADDR                       0x80201000UL
++#define GPTIMER1_BASE_ADDR                       0x80202000UL
++#define QSPI_BASE_ADDR                           0x80203000UL
++#define CGU_BASE_ADDR                            0x80204000UL
++#define CREG_BASE_ADDR                           0x80205000UL
++#define PEC_BASE_ADDR                            0x80206000UL
++#define WDRU_BASE_ADDR                           0x80207000UL
++#define BSEC_BASE_ADDR                           0x80208000UL
++#define DAP_ROM_BASE_ADDR                        0x80210000UL
++#define SOC_CTI_BASE_ADDR                        0x80211000UL
++#define TPIU_BASE_ADDR                           0x80212000UL
++#define TMC_ETF_BASE_ADDR                        0x80213000UL
++#define R4_ETM_BASE_ADDR                         0x80214000UL
++#define R4_CTI_BASE_ADDR                         0x80215000UL
++#define R4_DBG_BASE_ADDR                         0x80216000UL
++#define GMAC_BASE_ADDR                           0x80300000UL
++#define RNSS_BASE_ADDR                           0x80302000UL
++#define CRYP_BASE_ADDR                           0x80303000UL
++#define HASH_BASE_ADDR                           0x80304000UL
++#define GPDMA_BASE_ADDR                          0x80305000UL
++#define ISA_BASE_ADDR                            0x8032A000UL
++#define HCI_BASE_ADDR                            0x80400000UL
++#define I2C1_BASE_ADDR                           0x80401000UL
++#define I2C2_BASE_ADDR                           0x80402000UL
++#define SAI_BASE_ADDR                            0x80403000UL
++#define USI_BASE_ADDR                            0x80404000UL
++#define SPI1_BASE_ADDR                           0x80405000UL
++#define UART_BASE_ADDR                           0x80406000UL
++#define SPI2_BASE_ADDR                           0x80500000UL
++#define CAN_BASE_ADDR                            0x80501000UL
++#define USART1_BASE_ADDR                         0x80502000UL
++#define USART2_BASE_ADDR                         0x80503000UL
++#define USART3_BASE_ADDR                         0x80504000UL
++#define USART4_BASE_ADDR                         0x80505000UL
++#define USART5_BASE_ADDR                         0x80506000UL
++#define USART6_BASE_ADDR                         0x80507000UL
++#define SDI2_BASE_ADDR                           0x80600000UL
++#define SDI1_BASE_ADDR                           0x80601000UL
++#define VICA_BASE_ADDR                           0x81000000UL
++#define VICB_BASE_ADDR                           0x81001000UL
++#define STM_CHANNELS_BASE_ADDR                   0x81100000UL
++#define STM_BASE_ADDR                            0x81110000UL
++#define SROM_BASE_ADDR                           0xFFFF0000UL
++
++#endif /* _ASM_ARCH_HARDWARE_H */
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h	2015-01-01 17:34:32.093505875 +0100
+@@ -0,0 +1,116 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef _STV0991_CGU_H
++#define _STV0991_CGU_H
++
++struct stv0991_cgu_regs {
++	u32 cpu_freq;		/* offset 0x0 */
++	u32 icn2_freq;		/* offset 0x4 */
++	u32 dma_freq;		/* offset 0x8 */
++	u32 isp_freq;		/* offset 0xc */
++	u32 h264_freq;		/* offset 0x10 */
++	u32 osif_freq;		/* offset 0x14 */
++	u32 ren_freq;		/* offset 0x18 */
++	u32 tim_freq;		/* offset 0x1c */
++	u32 sai_freq;		/* offset 0x20 */
++	u32 eth_freq;		/* offset 0x24 */
++	u32 i2c_freq;		/* offset 0x28 */
++	u32 spi_freq;		/* offset 0x2c */
++	u32 uart_freq;		/* offset 0x30 */
++	u32 qspi_freq;		/* offset 0x34 */
++	u32 sdio_freq;		/* offset 0x38 */
++	u32 usi_freq;		/* offset 0x3c */
++	u32 can_line_freq;	/* offset 0x40 */
++	u32 debug_freq;		/* offset 0x44 */
++	u32 trace_freq;		/* offset 0x48 */
++	u32 stm_freq;		/* offset 0x4c */
++	u32 eth_ctrl;		/* offset 0x50 */
++	u32 reserved[3];	/* offset 0x54 */
++	u32 osc_ctrl;		/* offset 0x60 */
++	u32 pll1_ctrl;		/* offset 0x64 */
++	u32 pll1_freq;		/* offset 0x68 */
++	u32 pll1_fract;		/* offset 0x6c */
++	u32 pll1_spread;	/* offset 0x70 */
++	u32 pll1_status;	/* offset 0x74 */
++	u32 pll2_ctrl;		/* offset 0x78 */
++	u32 pll2_freq;		/* offset 0x7c */
++	u32 pll2_fract;		/* offset 0x80 */
++	u32 pll2_spread;	/* offset 0x84 */
++	u32 pll2_status;	/* offset 0x88 */
++	u32 cgu_enable_1;	/* offset 0x8c */
++	u32 cgu_enable_2;	/* offset 0x90 */
++	u32 cgu_isp_pulse;	/* offset 0x94 */
++	u32 cgu_h264_pulse;	/* offset 0x98 */
++	u32 cgu_osif_pulse;	/* offset 0x9c */
++	u32 cgu_ren_pulse;	/* offset 0xa0 */
++
++};
++
++/* CGU Timer */
++#define CLK_TMR_OSC			0
++#define CLK_TMR_MCLK			1
++#define CLK_TMR_PLL1			2
++#define CLK_TMR_PLL2			3
++#define MDIV_SHIFT_TMR			3
++#define DIV_SHIFT_TMR			6
++
++#define TIMER1_CLK_CFG			(0 << DIV_SHIFT_TMR \
++					| 0 << MDIV_SHIFT_TMR | CLK_TMR_MCLK)
++
++/* Clock Enable/Disable */
++
++#define TIMER1_CLK_EN			(1 << 15)
++
++/* CGU Uart config */
++#define CLK_UART_MCLK			0
++#define CLK_UART_PLL1			1
++#define CLK_UART_PLL2			2
++
++#define MDIV_SHIFT_UART			3
++#define DIV_SHIFT_UART			6
++
++#define UART_CLK_CFG			(4 << DIV_SHIFT_UART \
++					| 1 << MDIV_SHIFT_UART | CLK_UART_MCLK)
++
++/* CGU Ethernet clock config */
++#define CLK_ETH_MCLK			0
++#define CLK_ETH_PLL1			1
++#define CLK_ETH_PLL2			2
++
++#define MDIV_SHIFT_ETH			3
++#define DIV_SHIFT_ETH			6
++#define DIV_ETH_125			9
++#define DIV_ETH_50			12
++#define DIV_ETH_P2P			15
++
++#define ETH_CLK_CFG			(4 << DIV_ETH_P2P | 4 << DIV_ETH_50 \
++					| 1 << DIV_ETH_125 \
++					| 0 << DIV_SHIFT_ETH \
++					| 3 << MDIV_SHIFT_ETH | CLK_ETH_PLL1)
++ /* CGU Ethernet control */
++
++#define ETH_CLK_TX_EXT_PHY		0
++#define ETH_CLK_TX_125M			1
++#define ETH_CLK_TX_25M			2
++#define ETH_CLK_TX_2M5			3
++#define ETH_CLK_TX_DIS			7
++
++#define ETH_CLK_RX_EXT_PHY		0
++#define ETH_CLK_RX_25M			1
++#define ETH_CLK_RX_2M5			2
++#define ETH_CLK_RX_DIS			3
++#define RX_CLK_SHIFT			3
++#define ETH_CLK_MASK			~(0x1F)
++
++#define ETH_PHY_MODE_GMII		0
++#define ETH_PHY_MODE_RMII		1
++#define ETH_PHY_CLK_DIS			1
++
++#define ETH_CLK_CTRL			(ETH_CLK_RX_EXT_PHY << RX_CLK_SHIFT \
++					| ETH_CLK_TX_EXT_PHY)
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_creg.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_creg.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_creg.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_creg.h	2015-01-01 17:34:32.093505875 +0100
+@@ -0,0 +1,95 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef _STV0991_CREG_H
++#define _STV0991_CREG_H
++
++struct stv0991_creg {
++	u32 version;		/* offset 0x0 */
++	u32 hdpctl;		/* offset 0x4 */
++	u32 hdpval;		/* offset 0x8 */
++	u32 hdpgposet;		/* offset 0xc */
++	u32 hdpgpoclr;		/* offset 0x10 */
++	u32 hdpgpoval;		/* offset 0x14 */
++	u32 stm_mux;		/* offset 0x18 */
++	u32 sysctrl_1;		/* offset 0x1c */
++	u32 sysctrl_2;		/* offset 0x20 */
++	u32 sysctrl_3;		/* offset 0x24 */
++	u32 sysctrl_4;		/* offset 0x28 */
++	u32 reserved_1[0x35];	/* offset 0x2C-0xFC */
++	u32 mux1;		/* offset 0x100 */
++	u32 mux2;		/* offset 0x104 */
++	u32 mux3;		/* offset 0x108 */
++	u32 mux4;		/* offset 0x10c */
++	u32 mux5;		/* offset 0x110 */
++	u32 mux6;		/* offset 0x114 */
++	u32 mux7;		/* offset 0x118 */
++	u32 mux8;		/* offset 0x11c */
++	u32 mux9;		/* offset 0x120 */
++	u32 mux10;		/* offset 0x124 */
++	u32 mux11;		/* offset 0x128 */
++	u32 mux12;		/* offset 0x12c */
++	u32 mux13;		/* offset 0x130 */
++	u32 reserved_2[0x33];	/* offset 0x134-0x1FC */
++	u32 cfg_pad1;		/* offset 0x200 */
++	u32 cfg_pad2;		/* offset 0x204 */
++	u32 cfg_pad3;		/* offset 0x208 */
++	u32 cfg_pad4;		/* offset 0x20c */
++	u32 cfg_pad5;		/* offset 0x210 */
++	u32 cfg_pad6;		/* offset 0x214 */
++	u32 cfg_pad7;		/* offset 0x218 */
++	u32 reserved_3[0x39];	/* offset 0x21C-0x2FC */
++	u32 vdd_pad1;		/* offset 0x300 */
++	u32 vdd_pad2;		/* offset 0x304 */
++	u32 reserved_4[0x3e];	/* offset 0x308-0x3FC */
++	u32 vdd_comp1;		/* offset 0x400 */
++};
++
++/* CREG MUX 12 register */
++#define GPIOC_30_MUX_SHIFT	24
++#define GPIOC_30_MUX_MASK	~(1 << GPIOC_30_MUX_SHIFT)
++#define CFG_GPIOC_30_UART_TX	(1 << GPIOC_30_MUX_SHIFT)
++
++#define GPIOC_31_MUX_SHIFT	28
++#define GPIOC_31_MUX_MASK	~(1 << GPIOC_31_MUX_SHIFT)
++#define CFG_GPIOC_31_UART_RX	(1 << GPIOC_31_MUX_SHIFT)
++
++/* CREG MUX 7 register */
++#define GPIOB_16_MUX_SHIFT	0
++#define GPIOB_16_MUX_MASK	~(1 << GPIOB_16_MUX_SHIFT)
++#define CFG_GPIOB_16_UART_TX	(1 << GPIOB_16_MUX_SHIFT)
++
++#define GPIOB_17_MUX_SHIFT	4
++#define GPIOB_17_MUX_MASK	~(1 << GPIOB_17_MUX_SHIFT)
++#define CFG_GPIOB_17_UART_RX	(1 << GPIOB_17_MUX_SHIFT)
++
++/* CREG CFG_PAD6 register */
++
++#define GPIOC_31_MODE_SHIFT	30
++#define GPIOC_31_MODE_MASK	~(1 << GPIOC_31_MODE_SHIFT)
++#define CFG_GPIOC_31_MODE_OD	(0 << GPIOC_31_MODE_SHIFT)
++#define CFG_GPIOC_31_MODE_PP	(1 << GPIOC_31_MODE_SHIFT)
++
++#define GPIOC_30_MODE_SHIFT	28
++#define GPIOC_30_MODE_MASK	~(1 << GPIOC_30_MODE_SHIFT)
++#define CFG_GPIOC_30_MODE_LOW	(0 << GPIOC_30_MODE_SHIFT)
++#define CFG_GPIOC_30_MODE_HIGH	(1 << GPIOC_30_MODE_SHIFT)
++
++/* CREG Ethernet pad config */
++
++#define VDD_ETH_PS_1V8		0
++#define VDD_ETH_PS_2V5		2
++#define VDD_ETH_PS_3V3		3
++#define VDD_ETH_PS_MASK		0x3
++
++#define VDD_ETH_PS_SHIFT	12
++#define ETH_VDD_CFG		(VDD_ETH_PS_1V8 << VDD_ETH_PS_SHIFT)
++
++#define VDD_ETH_M_PS_SHIFT	28
++#define ETH_M_VDD_CFG		(VDD_ETH_PS_1V8 << VDD_ETH_M_PS_SHIFT)
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_defs.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_defs.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_defs.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_defs.h	2015-01-01 17:34:32.093505875 +0100
+@@ -0,0 +1,16 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __STV0991_DEFS_H__
++#define __STV0991_DEFS_H__
++#include <asm/arch/stv0991_periph.h>
++
++extern int stv0991_pinmux_config(enum periph_id);
++extern int clock_setup(enum periph_clock);
++
++#endif
++
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h	2015-01-01 17:34:32.093505875 +0100
+@@ -0,0 +1,43 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef _STV0991_GPT_H
++#define _STV0991_GPT_H
++
++#include <asm/arch-stv0991/hardware.h>
++
++struct gpt_regs {
++	u32 cr1;
++	u32 cr2;
++	u32 reserved_1;
++	u32 dier;	/* dma_int_en */
++	u32 sr;		/* status reg */
++	u32 egr;	/* event gen */
++	u32 reserved_2[3];	/* offset 0x18--0x20*/
++	u32 cnt;
++	u32 psc;
++	u32 arr;
++};
++
++struct gpt_regs *const gpt1_regs_ptr =
++	(struct gpt_regs *) GPTIMER1_BASE_ADDR;
++
++/* Timer control1 register  */
++#define GPT_CR1_CEN			0x0001
++#define GPT_MODE_AUTO_RELOAD		(1 << 7)
++
++/* Timer prescalar reg */
++#define GPT_PRESCALER_128		0x128
++
++/* Auto reload register for free running config */
++#define GPT_FREE_RUNNING		0xFFFF
++
++/* Timer, HZ specific defines */
++#define CONFIG_STV0991_HZ		1000
++#define CONFIG_STV0991_HZ_CLOCK		(27*1000*1000)/GPT_PRESCALER_128
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_periph.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_periph.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_periph.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_periph.h	2015-01-01 17:34:32.093505875 +0100
+@@ -0,0 +1,44 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __ASM_ARM_ARCH_PERIPH_H
++#define __ASM_ARM_ARCH_PERIPH_H
++
++/*
++ * Peripherals required for pinmux configuration. List will
++ * grow with support for more devices getting added.
++ * Numbering based on interrupt table.
++ *
++ */
++enum periph_id {
++	UART_GPIOC_30_31 = 0,
++	UART_GPIOB_16_17,
++	ETH_GPIOB_10_31_C_0_4,
++	PERIPH_ID_I2C0,
++	PERIPH_ID_I2C1,
++	PERIPH_ID_I2C2,
++	PERIPH_ID_I2C3,
++	PERIPH_ID_I2C4,
++	PERIPH_ID_I2C5,
++	PERIPH_ID_I2C6,
++	PERIPH_ID_I2C7,
++	PERIPH_ID_SPI0,
++	PERIPH_ID_SPI1,
++	PERIPH_ID_SPI2,
++	PERIPH_ID_SDMMC0,
++	PERIPH_ID_SDMMC1,
++	PERIPH_ID_SDMMC2,
++	PERIPH_ID_SDMMC3,
++	PERIPH_ID_I2S1,
++};
++
++enum periph_clock {
++	UART_CLOCK_CFG = 0,
++	ETH_CLOCK_CFG,
++};
++
++#endif /* __ASM_ARM_ARCH_PERIPH_H */
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h u-boot/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h	2015-01-01 17:34:32.093505875 +0100
+@@ -0,0 +1,28 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef _STV0991_WD_RST_H
++#define _STV0991_WD_RST_H
++#include <asm/arch-stv0991/hardware.h>
++
++struct stv0991_wd_ru {
++	u32 wdru_config;
++	u32 wdru_ctrl1;
++	u32 wdru_ctrl2;
++	u32 wdru_tim;
++	u32 wdru_count;
++	u32 wdru_stat;
++	u32 wdru_wrlock;
++};
++
++struct stv0991_wd_ru *const stv0991_wd_ru_ptr = \
++		(struct stv0991_wd_ru *)WDRU_BASE_ADDR;
++
++/* Watchdog control register */
++#define WDRU_RST_SYS		0x1
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-tegra/tegra_i2c.h u-boot/arch/arm/include/asm/arch-tegra/tegra_i2c.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-tegra/tegra_i2c.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-tegra/tegra_i2c.h	2015-01-01 17:34:32.097505809 +0100
+@@ -167,6 +167,6 @@
+  *
+  * @return number of bus, or -1 if there is no DVC active
+  */
+-int tegra_i2c_get_dvc_bus_num(void);
++int tegra_i2c_get_dvc_bus(struct udevice **busp);
+ 
+ #endif	/* _TEGRA_I2C_H_ */
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/arch-vf610/imx-regs.h u-boot/arch/arm/include/asm/arch-vf610/imx-regs.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/arch-vf610/imx-regs.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/arch-vf610/imx-regs.h	2015-01-01 17:34:32.109505612 +0100
+@@ -256,6 +256,14 @@
+ #define DDRMC_CR161_TODTH_RD(v)				(((v) & 0xf) << 8)
+ #define DDRMC_CR161_TODTH_WR(v)				((v) & 0xf)
+ 
++/* System Reset Controller (SRC) */
++#define SRC_SRSR_SW_RST					(0x1 << 18)
++#define SRC_SRSR_RESETB					(0x1 << 7)
++#define SRC_SRSR_JTAG_RST				(0x1 << 5)
++#define SRC_SRSR_WDOG_M4				(0x1 << 4)
++#define SRC_SRSR_WDOG_A5				(0x1 << 3)
++#define SRC_SRSR_POR_RST				(0x1 << 0)
++
+ #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+ #include <asm/types.h>
+ 
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/kona-common/clk.h u-boot/arch/arm/include/asm/kona-common/clk.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/kona-common/clk.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/kona-common/clk.h	2015-01-01 17:34:32.113505547 +0100
+@@ -25,5 +25,6 @@
+ struct clk *clk_get_parent(struct clk *clk);
+ int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep);
+ int clk_bsc_enable(void *base);
++int clk_usb_otg_enable(void *base);
+ 
+ #endif
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/pcie_layerscape.h u-boot/arch/arm/include/asm/pcie_layerscape.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/pcie_layerscape.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/arm/include/asm/pcie_layerscape.h	2015-01-01 17:34:32.125505350 +0100
+@@ -0,0 +1,13 @@
++/*
++ * Copyright 2014 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __PCIE_LAYERSCAPE_H_
++#define __PCIE_LAYERSCAPE_H_
++
++void pci_init_board(void);
++void ft_pcie_setup(void *blob, bd_t *bd);
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/arm/include/asm/semihosting.h u-boot/arch/arm/include/asm/semihosting.h
+--- u-boot-2015.01-rc3/arch/arm/include/asm/semihosting.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/include/asm/semihosting.h	2015-01-01 17:34:32.125505350 +0100
+@@ -12,10 +12,6 @@
+  * code for more information.
+  */
+ int smh_load(const char *fname, void *memp, int avail, int verbose);
+-int smh_read(int fd, void *memp, int len);
+-int smh_open(const char *fname, char *modestr);
+-int smh_close(int fd);
+-int smh_len_fd(int fd);
+-int smh_len(const char *fname);
++long smh_len(const char *fname);
+ 
+ #endif /* __SEMIHOSTING_H__ */
+diff -ruN u-boot-2015.01-rc3/arch/arm/Kconfig u-boot/arch/arm/Kconfig
+--- u-boot-2015.01-rc3/arch/arm/Kconfig	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/Kconfig	2015-01-01 17:34:31.989507580 +0100
+@@ -341,6 +341,10 @@
+ 	bool "Support spear600"
+ 	select CPU_ARM926EJS
+ 
++config TARGET_STV0991
++	bool "Support stv0991"
++	select CPU_V7
++
+ config TARGET_X600
+ 	bool "Support x600"
+ 	select CPU_ARM926EJS
+@@ -650,6 +654,7 @@
+ 
+ config TARGET_TBS2910
+ 	bool "Support tbs2910"
++	select CPU_V7
+ 
+ config TARGET_TQMA6
+ 	bool "TQ Systems TQMa6 board"
+@@ -728,12 +733,14 @@
+ 	select ARM64
+ 
+ config TARGET_LS1021AQDS
+-	bool "Support ls1021aqds_nor"
++	bool "Support ls1021aqds"
+ 	select CPU_V7
++	select SUPPORT_SPL
+ 
+ config TARGET_LS1021ATWR
+-	bool "Support ls1021atwr_nor"
++	bool "Support ls1021atwr"
+ 	select CPU_V7
++	select SUPPORT_SPL
+ 
+ config TARGET_BALLOON3
+ 	bool "Support balloon3"
+@@ -793,6 +800,7 @@
+ 	bool "Panasonic UniPhier platform"
+ 	select CPU_V7
+ 	select SUPPORT_SPL
++	select SPL
+ 	select OF_CONTROL if !SPL_BUILD
+ 
+ endchoice
+@@ -953,6 +961,7 @@
+ source "board/spear/x600/Kconfig"
+ source "board/st-ericsson/snowball/Kconfig"
+ source "board/st-ericsson/u8500/Kconfig"
++source "board/st/stv0991/Kconfig"
+ source "board/sunxi/Kconfig"
+ source "board/syteco/jadecpu/Kconfig"
+ source "board/syteco/zmx25/Kconfig"
+diff -ruN u-boot-2015.01-rc3/arch/arm/lib/semihosting.c u-boot/arch/arm/lib/semihosting.c
+--- u-boot-2015.01-rc3/arch/arm/lib/semihosting.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/arm/lib/semihosting.c	2015-01-01 17:34:32.133505219 +0100
+@@ -26,9 +26,9 @@
+ /*
+  * Call the handler
+  */
+-static int smh_trap(unsigned int sysnum, void *addr)
++static long smh_trap(unsigned int sysnum, void *addr)
+ {
+-	register int result asm("r0");
++	register long result asm("r0");
+ #if defined(CONFIG_ARM64)
+ 	asm volatile ("hlt #0xf000" : "=r" (result) : "0"(sysnum), "r"(addr));
+ #else
+@@ -39,167 +39,164 @@
+ }
+ 
+ /*
+- * Open, load a file into memory, and close it. Check that the available space
+- * is sufficient to store the entire file. Return the bytes actually read from
+- * the file as seen by the read function. The verbose flag enables some extra
+- * printing of successful read status.
++ * Open a file on the host. Mode is "r" or "rb" currently. Returns a file
++ * descriptor or -1 on error.
+  */
+-int smh_load(const char *fname, void *memp, int avail, int verbose)
++static long smh_open(const char *fname, char *modestr)
+ {
+-	int ret, fd, len;
+-
+-	ret = -1;
+-
+-	debug("%s: fname \'%s\', avail %u, memp %p\n", __func__, fname,
+-	      avail, memp);
+-
+-	/* Open the file */
+-	fd = smh_open(fname, "rb");
+-	if (fd == -1)
+-		return ret;
++	long fd;
++	unsigned long mode;
++	struct smh_open_s {
++		const char *fname;
++		unsigned long mode;
++		size_t len;
++	} open;
+ 
+-	/* Get the file length */
+-	ret = smh_len_fd(fd);
+-	if (ret == -1) {
+-		smh_close(fd);
+-		return ret;
+-	}
++	debug("%s: file \'%s\', mode \'%s\'\n", __func__, fname, modestr);
+ 
+-	/* Check that the file will fit in the supplied buffer */
+-	if (ret > avail) {
+-		printf("%s: ERROR ret %d, avail %u\n", __func__, ret,
+-		       avail);
+-		smh_close(fd);
+-		return ret;
++	/* Check the file mode */
++	if (!(strcmp(modestr, "r"))) {
++		mode = MODE_READ;
++	} else if (!(strcmp(modestr, "rb"))) {
++		mode = MODE_READBIN;
++	} else {
++		printf("%s: ERROR mode \'%s\' not supported\n", __func__,
++		       modestr);
++		return -1;
+ 	}
+ 
+-	len = ret;
+-
+-	/* Read the file into the buffer */
+-	ret = smh_read(fd, memp, len);
+-	if (ret == 0) {
+-		/* Print successful load information if requested */
+-		if (verbose) {
+-			printf("\n%s\n", fname);
+-			printf("    0x%8p dest\n", memp);
+-			printf("    0x%08x size\n", len);
+-			printf("    0x%08x avail\n", avail);
+-		}
+-	}
++	open.fname = fname;
++	open.len = strlen(fname);
++	open.mode = mode;
+ 
+-	/* Close the file */
+-	smh_close(fd);
++	/* Open the file on the host */
++	fd = smh_trap(SYSOPEN, &open);
++	if (fd == -1)
++		printf("%s: ERROR fd %ld for file \'%s\'\n", __func__, fd,
++		       fname);
+ 
+-	return ret;
++	return fd;
+ }
+ 
+ /*
+  * Read 'len' bytes of file into 'memp'. Returns 0 on success, else failure
+  */
+-int smh_read(int fd, void *memp, int len)
++static long smh_read(long fd, void *memp, size_t len)
+ {
+-	int ret;
++	long ret;
+ 	struct smh_read_s {
+-		int fd;
++		long fd;
+ 		void *memp;
+-		int len;
++		size_t len;
+ 	} read;
+ 
+-	debug("%s: fd %d, memp %p, len %d\n", __func__, fd, memp, len);
++	debug("%s: fd %ld, memp %p, len %lu\n", __func__, fd, memp, len);
+ 
+ 	read.fd = fd;
+ 	read.memp = memp;
+ 	read.len = len;
+ 
+ 	ret = smh_trap(SYSREAD, &read);
+-	if (ret == 0) {
+-		return 0;
+-	} else {
++	if (ret < 0) {
+ 		/*
+ 		 * The ARM handler allows for returning partial lengths,
+ 		 * but in practice this never happens so rather than create
+ 		 * hard to maintain partial read loops and such, just fail
+ 		 * with an error message.
+ 		 */
+-		printf("%s: ERROR ret %d, fd %d, len %u memp %p\n",
++		printf("%s: ERROR ret %ld, fd %ld, len %lu memp %p\n",
+ 		       __func__, ret, fd, len, memp);
++		return -1;
+ 	}
+-	return ret;
++
++	return 0;
+ }
+ 
+ /*
+- * Open a file on the host. Mode is "r" or "rb" currently. Returns a file
+- * descriptor or -1 on error.
++ * Close the file using the file descriptor
+  */
+-int smh_open(const char *fname, char *modestr)
++static long smh_close(long fd)
+ {
+-	int ret, fd, mode;
+-	struct smh_open_s {
+-		const char *fname;
+-		unsigned int mode;
+-		unsigned int len;
+-	} open;
++	long ret;
+ 
+-	debug("%s: file \'%s\', mode \'%s\'\n", __func__, fname, modestr);
+-
+-	ret = -1;
++	debug("%s: fd %ld\n", __func__, fd);
+ 
+-	/* Check the file mode */
+-	if (!(strcmp(modestr, "r"))) {
+-		mode = MODE_READ;
+-	} else if (!(strcmp(modestr, "rb"))) {
+-		mode = MODE_READBIN;
+-	} else {
+-		printf("%s: ERROR mode \'%s\' not supported\n", __func__,
+-		       modestr);
+-		return ret;
+-	}
+-
+-	open.fname = fname;
+-	open.len = strlen(fname);
+-	open.mode = mode;
+-
+-	/* Open the file on the host */
+-	fd = smh_trap(SYSOPEN, &open);
+-	if (fd == -1)
+-		printf("%s: ERROR fd %d for file \'%s\'\n", __func__, fd,
+-		       fname);
++	ret = smh_trap(SYSCLOSE, &fd);
++	if (ret == -1)
++		printf("%s: ERROR fd %ld\n", __func__, fd);
+ 
+-	return fd;
++	return ret;
+ }
+ 
+ /*
+- * Close the file using the file descriptor
++ * Get the file length from the file descriptor
+  */
+-int smh_close(int fd)
++static long smh_len_fd(long fd)
+ {
+-	int ret;
+-	long fdlong;
++	long ret;
+ 
+-	debug("%s: fd %d\n", __func__, fd);
++	debug("%s: fd %ld\n", __func__, fd);
+ 
+-	fdlong = (long)fd;
+-	ret = smh_trap(SYSCLOSE, &fdlong);
++	ret = smh_trap(SYSFLEN, &fd);
+ 	if (ret == -1)
+-		printf("%s: ERROR fd %d\n", __func__, fd);
++		printf("%s: ERROR ret %ld, fd %ld\n", __func__, ret, fd);
+ 
+ 	return ret;
+ }
+ 
+ /*
+- * Get the file length from the file descriptor
++ * Open, load a file into memory, and close it. Check that the available space
++ * is sufficient to store the entire file. Return the bytes actually read from
++ * the file as seen by the read function. The verbose flag enables some extra
++ * printing of successful read status.
+  */
+-int smh_len_fd(int fd)
++int smh_load(const char *fname, void *memp, int avail, int verbose)
+ {
+-	int ret;
+-	long fdlong;
++	long ret;
++	long fd;
++	size_t len;
+ 
+-	debug("%s: fd %d\n", __func__, fd);
++	ret = -1;
+ 
+-	fdlong = (long)fd;
+-	ret = smh_trap(SYSFLEN, &fdlong);
+-	if (ret == -1)
+-		printf("%s: ERROR ret %d\n", __func__, ret);
++	debug("%s: fname \'%s\', avail %u, memp %p\n", __func__, fname,
++	      avail, memp);
++
++	/* Open the file */
++	fd = smh_open(fname, "rb");
++	if (fd == -1)
++		return -1;
++
++	/* Get the file length */
++	ret = smh_len_fd(fd);
++	if (ret == -1) {
++		smh_close(fd);
++		return -1;
++	}
++
++	/* Check that the file will fit in the supplied buffer */
++	if (ret > avail) {
++		printf("%s: ERROR ret %ld, avail %u\n", __func__, ret,
++		       avail);
++		smh_close(fd);
++		return -1;
++	}
++
++	len = ret;
++
++	/* Read the file into the buffer */
++	ret = smh_read(fd, memp, len);
++	if (ret == 0) {
++		/* Print successful load information if requested */
++		if (verbose) {
++			printf("\n%s\n", fname);
++			printf("    0x%8p dest\n", memp);
++			printf("    0x%08lx size\n", len);
++			printf("    0x%08x avail\n", avail);
++		}
++	}
++
++	/* Close the file */
++	smh_close(fd);
+ 
+ 	return ret;
+ }
+@@ -207,26 +204,32 @@
+ /*
+  * Get the file length from the filename
+  */
+-int smh_len(const char *fname)
++long smh_len(const char *fname)
+ {
+-	int ret, fd, len;
++	long ret;
++	long fd;
++	long len;
+ 
+ 	debug("%s: file \'%s\'\n", __func__, fname);
+ 
+ 	/* Open the file */
+ 	fd = smh_open(fname, "rb");
+-	if (fd == -1)
++	if (fd < 0)
+ 		return fd;
+ 
+ 	/* Get the file length */
+ 	len = smh_len_fd(fd);
++	if (len < 0) {
++		smh_close(fd);
++		return len;
++	}
+ 
+ 	/* Close the file */
+ 	ret = smh_close(fd);
+-	if (ret == -1)
++	if (ret < 0)
+ 		return ret;
+ 
+-	debug("%s: returning len %d\n", __func__, len);
++	debug("%s: returning len %ld\n", __func__, len);
+ 
+ 	/* Return the file length (or -1 error indication) */
+ 	return len;
+diff -ruN u-boot-2015.01-rc3/arch/microblaze/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/microblaze/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h
+diff -ruN u-boot-2015.01-rc3/arch/microblaze/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/microblaze/dts/include/dt-bindings/reset/altr,rst-mgr.h
+diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/p5040_ids.c u-boot/arch/powerpc/cpu/mpc85xx/p5040_ids.c
+--- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/p5040_ids.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/powerpc/cpu/mpc85xx/p5040_ids.c	2015-01-01 17:34:32.221503777 +0100
+@@ -49,23 +49,23 @@
+ 
+ #ifdef CONFIG_SYS_DPAA_FMAN
+ struct liodn_id_table fman1_liodn_tbl[] = {
+-	SET_FMAN_RX_1G_LIODN(1, 0, 6),
+-	SET_FMAN_RX_1G_LIODN(1, 1, 7),
+-	SET_FMAN_RX_1G_LIODN(1, 2, 8),
+-	SET_FMAN_RX_1G_LIODN(1, 3, 9),
+-	SET_FMAN_RX_1G_LIODN(1, 4, 10),
+-	SET_FMAN_RX_10G_LIODN(1, 0, 11),
++	SET_FMAN_RX_1G_LIODN(1, 0, 11),
++	SET_FMAN_RX_1G_LIODN(1, 1, 12),
++	SET_FMAN_RX_1G_LIODN(1, 2, 13),
++	SET_FMAN_RX_1G_LIODN(1, 3, 14),
++	SET_FMAN_RX_1G_LIODN(1, 4, 15),
++	SET_FMAN_RX_10G_LIODN(1, 0, 16),
+ };
+ int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+ 
+ #if (CONFIG_SYS_NUM_FMAN == 2)
+ struct liodn_id_table fman2_liodn_tbl[] = {
+-	SET_FMAN_RX_1G_LIODN(2, 0, 12),
+-	SET_FMAN_RX_1G_LIODN(2, 1, 13),
+-	SET_FMAN_RX_1G_LIODN(2, 2, 14),
+-	SET_FMAN_RX_1G_LIODN(2, 3, 15),
+-	SET_FMAN_RX_1G_LIODN(2, 4, 16),
+-	SET_FMAN_RX_10G_LIODN(2, 0, 17),
++	SET_FMAN_RX_1G_LIODN(2, 0, 17),
++	SET_FMAN_RX_1G_LIODN(2, 1, 18),
++	SET_FMAN_RX_1G_LIODN(2, 2, 19),
++	SET_FMAN_RX_1G_LIODN(2, 3, 20),
++	SET_FMAN_RX_1G_LIODN(2, 4, 21),
++	SET_FMAN_RX_10G_LIODN(2, 0, 22),
+ };
+ int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+ #endif
+diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/portals.c u-boot/arch/powerpc/cpu/mpc85xx/portals.c
+--- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/portals.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/powerpc/cpu/mpc85xx/portals.c	2015-01-01 17:34:32.221503777 +0100
+@@ -14,9 +14,46 @@
+ #include <asm/fsl_portals.h>
+ #include <asm/fsl_liodn.h>
+ 
++#define MAX_BPORTALS (CONFIG_SYS_BMAN_CINH_SIZE / CONFIG_SYS_BMAN_SP_CINH_SIZE)
++#define MAX_QPORTALS (CONFIG_SYS_QMAN_CINH_SIZE / CONFIG_SYS_QMAN_SP_CINH_SIZE)
++static void inhibit_portals(void __iomem *addr, int max_portals,
++			int arch_max_portals, int portal_cinh_size)
++{
++	uint32_t val;
++	int i;
++
++	/* arch_max_portals is the maximum based on memory size. This includes
++	 * the reserved memory in the SoC.  max_portals the number of physical
++	 * portals in the SoC */
++	if (max_portals > arch_max_portals) {
++		printf("ERROR: portal config error\n");
++		max_portals = arch_max_portals;
++	}
++
++	for (i = 0; i < max_portals; i++) {
++		out_be32(addr, -1);
++		val = in_be32(addr);
++		if (!val) {
++			printf("ERROR: Stopped after %d portals\n", i);
++			goto done;
++		}
++		addr += portal_cinh_size;
++	}
++#ifdef DEBUG
++	printf("Cleared %d portals\n", i);
++#endif
++done:
++
++	return;
++}
++
+ void setup_portals(void)
+ {
+ 	ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_QMAN_ADDR;
++	void __iomem *bpaddr = (void *)CONFIG_SYS_BMAN_CINH_BASE +
++				CONFIG_SYS_BMAN_SWP_ISDR_REG;
++	void __iomem *qpaddr = (void *)CONFIG_SYS_QMAN_CINH_BASE +
++				CONFIG_SYS_QMAN_SWP_ISDR_REG;
+ #ifdef CONFIG_FSL_CORENET
+ 	int i;
+ 
+@@ -38,6 +75,12 @@
+ 	out_be32(&qman->qcsp_bare, (u32)(CONFIG_SYS_QMAN_MEM_PHYS >> 32));
+ #endif
+ 	out_be32(&qman->qcsp_bar, (u32)CONFIG_SYS_QMAN_MEM_PHYS);
++
++	/* Change default state of BMan ISDR portals to all 1s */
++	inhibit_portals(bpaddr, CONFIG_SYS_BMAN_NUM_PORTALS, MAX_BPORTALS,
++			CONFIG_SYS_BMAN_SP_CINH_SIZE);
++	inhibit_portals(qpaddr, CONFIG_SYS_QMAN_NUM_PORTALS, MAX_QPORTALS,
++			CONFIG_SYS_QMAN_SP_CINH_SIZE);
+ }
+ 
+ /* Update portal containter to match LAW setup of portal in phy map */
+diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/tlb.c u-boot/arch/powerpc/cpu/mpc85xx/tlb.c
+--- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc85xx/tlb.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/powerpc/cpu/mpc85xx/tlb.c	2015-01-01 17:34:32.221503777 +0100
+@@ -299,12 +299,16 @@
+ {
+ 	unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
+ 	u64 memsize = (u64)memsize_in_meg << 20;
++	u64 size;
+ 
+-	memsize = min(memsize, (u64)CONFIG_MAX_MEM_MAPPED);
+-	memsize = tlb_map_range(ram_tlb_address, p_addr, memsize, TLB_MAP_RAM);
++	size = min(memsize, (u64)CONFIG_MAX_MEM_MAPPED);
++	size = tlb_map_range(ram_tlb_address, p_addr, size, TLB_MAP_RAM);
+ 
+-	if (memsize)
+-		print_size(memsize, " left unmapped\n");
++	if (size || memsize > CONFIG_MAX_MEM_MAPPED) {
++		print_size(memsize > CONFIG_MAX_MEM_MAPPED ?
++			   memsize - CONFIG_MAX_MEM_MAPPED + size : size,
++			   " left unmapped\n");
++	}
+ 
+ 	return memsize_in_meg;
+ }
+diff -ruN u-boot-2015.01-rc3/arch/powerpc/cpu/mpc8xxx/fdt.c u-boot/arch/powerpc/cpu/mpc8xxx/fdt.c
+--- u-boot-2015.01-rc3/arch/powerpc/cpu/mpc8xxx/fdt.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/powerpc/cpu/mpc8xxx/fdt.c	2015-01-01 17:34:32.225503711 +0100
+@@ -73,110 +73,6 @@
+ }
+ #endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
+ 
+-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+-static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
+-				const char *phy_type, int start_offset)
+-{
+-	const char *compat_dr = "fsl-usb2-dr";
+-	const char *compat_mph = "fsl-usb2-mph";
+-	const char *prop_mode = "dr_mode";
+-	const char *prop_type = "phy_type";
+-	const char *node_type = NULL;
+-	int node_offset;
+-	int err;
+-
+-	node_offset = fdt_node_offset_by_compatible(blob,
+-			start_offset, compat_mph);
+-	if (node_offset < 0) {
+-		node_offset = fdt_node_offset_by_compatible(blob,
+-			start_offset, compat_dr);
+-		if (node_offset < 0) {
+-			printf("WARNING: could not find compatible"
+-				" node %s or %s: %s.\n", compat_mph,
+-				compat_dr, fdt_strerror(node_offset));
+-			return -1;
+-		} else
+-			node_type = compat_dr;
+-	} else
+-		node_type = compat_mph;
+-
+-	if (mode) {
+-		err = fdt_setprop(blob, node_offset, prop_mode, mode,
+-				  strlen(mode) + 1);
+-		if (err < 0)
+-			printf("WARNING: could not set %s for %s: %s.\n",
+-			       prop_mode, node_type, fdt_strerror(err));
+-	}
+-
+-	if (phy_type) {
+-		err = fdt_setprop(blob, node_offset, prop_type, phy_type,
+-				  strlen(phy_type) + 1);
+-		if (err < 0)
+-			printf("WARNING: could not set %s for %s: %s.\n",
+-			       prop_type, node_type, fdt_strerror(err));
+-	}
+-
+-	return node_offset;
+-}
+-
+-void fdt_fixup_dr_usb(void *blob, bd_t *bd)
+-{
+-	const char *modes[] = { "host", "peripheral", "otg" };
+-	const char *phys[] = { "ulpi", "utmi" };
+-	int usb_mode_off = -1;
+-	int usb_phy_off = -1;
+-	char str[5];
+-	int i, j;
+-
+-	for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
+-		const char *dr_mode_type = NULL;
+-		const char *dr_phy_type = NULL;
+-		int mode_idx = -1, phy_idx = -1;
+-		snprintf(str, 5, "%s%d", "usb", i);
+-		if (hwconfig(str)) {
+-			for (j = 0; j < ARRAY_SIZE(modes); j++) {
+-				if (hwconfig_subarg_cmp(str, "dr_mode",
+-						modes[j])) {
+-					mode_idx = j;
+-					break;
+-				}
+-			}
+-
+-			for (j = 0; j < ARRAY_SIZE(phys); j++) {
+-				if (hwconfig_subarg_cmp(str, "phy_type",
+-						phys[j])) {
+-					phy_idx = j;
+-					break;
+-				}
+-			}
+-
+-			if (mode_idx < 0 && phy_idx < 0) {
+-				printf("WARNING: invalid phy or mode\n");
+-				return;
+-			}
+-
+-			if (mode_idx > -1)
+-				dr_mode_type = modes[mode_idx];
+-
+-			if (phy_idx > -1)
+-				dr_phy_type = phys[phy_idx];
+-		}
+-
+-		usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
+-			dr_mode_type, NULL, usb_mode_off);
+-
+-		if (usb_mode_off < 0)
+-			return;
+-
+-		usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
+-			NULL, dr_phy_type, usb_phy_off);
+-
+-		if (usb_phy_off < 0)
+-			return;
+-	}
+-}
+-#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
+-
+ /*
+  * update crypto node properties to a specified revision of the SEC
+  * called with sec_rev == 0 if not on an E processor
+diff -ruN u-boot-2015.01-rc3/arch/sandbox/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/sandbox/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h
+diff -ruN u-boot-2015.01-rc3/arch/sandbox/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/sandbox/dts/include/dt-bindings/reset/altr,rst-mgr.h
+diff -ruN u-boot-2015.01-rc3/arch/sandbox/dts/sandbox.dts u-boot/arch/sandbox/dts/sandbox.dts
+--- u-boot-2015.01-rc3/arch/sandbox/dts/sandbox.dts	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/sandbox/dts/sandbox.dts	2015-01-01 17:34:32.241503449 +0100
+@@ -134,6 +134,23 @@
+ 		num-gpios = <20>;
+ 	};
+ 
++	i2c@0 {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0>;
++		compatible = "sandbox,i2c";
++		clock-frequency = <400000>;
++		eeprom@2c {
++			reg = <0x2c>;
++			compatible = "i2c-eeprom";
++			emul {
++				compatible = "sandbox,i2c-eeprom";
++				sandbox,filename = "i2c.bin";
++				sandbox,size = <128>;
++			};
++		};
++	};
++
+ 	spi@0 {
+ 		#address-cells = <1>;
+ 		#size-cells = <0>;
+diff -ruN u-boot-2015.01-rc3/arch/sandbox/include/asm/test.h u-boot/arch/sandbox/include/asm/test.h
+--- u-boot-2015.01-rc3/arch/sandbox/include/asm/test.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/sandbox/include/asm/test.h	2015-01-01 17:34:32.241503449 +0100
+@@ -0,0 +1,26 @@
++/*
++ * Test-related constants for sandbox
++ *
++ * Copyright (c) 2014 Google, Inc
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __ASM_TEST_H
++#define __ASM_TEST_H
++
++/* The sandbox driver always permits an I2C device with this address */
++#define SANDBOX_I2C_TEST_ADDR	0x59
++
++enum sandbox_i2c_eeprom_test_mode {
++	SIE_TEST_MODE_NONE,
++	/* Permits read/write of only one byte per I2C transaction */
++	SIE_TEST_MODE_SINGLE_BYTE,
++};
++
++void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev,
++				      enum sandbox_i2c_eeprom_test_mode mode);
++
++void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len);
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/cpu.c u-boot/arch/x86/cpu/ivybridge/cpu.c
+--- u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/cpu.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/cpu/ivybridge/cpu.c	2015-01-01 17:34:32.249503317 +0100
+@@ -263,6 +263,7 @@
+ static int report_bist_failure(void)
+ {
+ 	if (gd->arch.bist != 0) {
++		post_code(POST_BIST_FAILURE);
+ 		printf("BIST failed: %08x\n", gd->arch.bist);
+ 		return -EFAULT;
+ 	}
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/microcode_intel.c u-boot/arch/x86/cpu/ivybridge/microcode_intel.c
+--- u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/microcode_intel.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/cpu/ivybridge/microcode_intel.c	2015-01-01 17:34:32.249503317 +0100
+@@ -40,6 +40,8 @@
+ 	update->data = fdt_getprop(blob, node, "data", &update->size);
+ 	if (!update->data)
+ 		return -EINVAL;
++	update->data += 48;
++	update->size -= 48;
+ 
+ 	update->header_version = fdtdec_get_int(blob, node,
+ 						"intel,header-version", 0);
+@@ -48,17 +50,17 @@
+ 	update->date_code = fdtdec_get_int(blob, node,
+ 					   "intel,date-code", 0);
+ 	update->processor_signature = fdtdec_get_int(blob, node,
+-					"intel.processor-signature", 0);
++					"intel,processor-signature", 0);
+ 	update->checksum = fdtdec_get_int(blob, node, "intel,checksum", 0);
+ 	update->loader_revision = fdtdec_get_int(blob, node,
+-						 "loader-revision", 0);
++						 "intel,loader-revision", 0);
+ 	update->processor_flags = fdtdec_get_int(blob, node,
+-						 "processor-flags", 0);
++						 "intel,processor-flags", 0);
+ 
+ 	return 0;
+ }
+ 
+-static uint32_t microcode_read_rev(void)
++static inline uint32_t microcode_read_rev(void)
+ {
+ 	/*
+ 	 * Some Intel CPUs can be very finicky about the CPUID sequence used.
+@@ -114,6 +116,7 @@
+ {
+ 	struct microcode_update cpu, update;
+ 	const void *blob = gd->fdt_blob;
++	int skipped;
+ 	int count;
+ 	int node;
+ 	int ret;
+@@ -121,12 +124,13 @@
+ 	microcode_read_cpu(&cpu);
+ 	node = 0;
+ 	count = 0;
++	skipped = 0;
+ 	do {
+ 		node = fdtdec_next_compatible(blob, node,
+ 					      COMPAT_INTEL_MICROCODE);
+ 		if (node < 0) {
+ 			debug("%s: Found %d updates\n", __func__, count);
+-			return count ? 0 : -ENOENT;
++			return count ? 0 : skipped ? -EEXIST : -ENOENT;
+ 		}
+ 
+ 		ret = microcode_decode_node(blob, node, &update);
+@@ -135,12 +139,15 @@
+ 			      ret);
+ 			return ret;
+ 		}
+-		if (update.processor_signature == cpu.processor_signature &&
+-		    (update.processor_flags & cpu.processor_flags)) {
+-			debug("%s: Update already exists\n", __func__);
+-			return -EEXIST;
++		if (!(update.processor_signature == cpu.processor_signature &&
++		      (update.processor_flags & cpu.processor_flags))) {
++			debug("%s: Skipping non-matching update, sig=%x, pf=%x\n",
++			      __func__, update.processor_signature,
++			      update.processor_flags);
++			skipped++;
++			continue;
+ 		}
+-
++		ret = microcode_read_rev();
+ 		wrmsr(0x79, (ulong)update.data, 0);
+ 		debug("microcode: updated to revision 0x%x date=%04x-%02x-%02x\n",
+ 		      microcode_read_rev(), update.date_code & 0xffff,
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/sdram.c u-boot/arch/x86/cpu/ivybridge/sdram.c
+--- u-boot-2015.01-rc3/arch/x86/cpu/ivybridge/sdram.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/cpu/ivybridge/sdram.c	2015-01-01 17:34:32.253503252 +0100
+@@ -177,7 +177,7 @@
+ 
+ 	debug("PEI data at %p, size %x:\n", pei_data, sizeof(*pei_data));
+ 
+-	data = (char *)CONFIG_X86_MRC_START;
++	data = (char *)CONFIG_X86_MRC_ADDR;
+ 	if (data) {
+ 		int rv;
+ 		int (*func)(struct pei_data *);
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/Makefile u-boot/arch/x86/cpu/Makefile
+--- u-boot-2015.01-rc3/arch/x86/cpu/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/cpu/Makefile	2015-01-01 17:34:32.249503317 +0100
+@@ -15,6 +15,7 @@
+ obj-$(CONFIG_SYS_COREBOOT) += coreboot/
+ obj-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += ivybridge/
+ obj-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += ivybridge/
++obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/
+ obj-y += lapic.o
+ obj-$(CONFIG_PCI) += pci.o
+ obj-y += turbo.o
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_configs.c u-boot/arch/x86/cpu/queensbay/fsp_configs.c
+--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_configs.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/cpu/queensbay/fsp_configs.c	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,20 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#include <common.h>
++#include <asm/arch/fsp/fsp_support.h>
++
++void update_fsp_upd(struct upd_region *fsp_upd)
++{
++	/* Override any UPD setting if required */
++
++	/* Uncomment the line below to enable DEBUG message */
++	/* fsp_upd->serial_dbgport_type = 1; */
++
++	/* Examples on how to initialize the pointers in UPD region */
++	/* fsp_upd->pcd_example = (EXAMPLE_DATA *)&example; */
++}
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_support.c u-boot/arch/x86/cpu/queensbay/fsp_support.c
+--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/fsp_support.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/cpu/queensbay/fsp_support.c	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,401 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#include <common.h>
++#include <asm/arch/fsp/fsp_support.h>
++#include <asm/post.h>
++
++/**
++ * Compares two GUIDs
++ *
++ * If the GUIDs are identical then true is returned.
++ * If there are any bit differences in the two GUIDs, then false is returned.
++ *
++ * @guid1:        A pointer to a 128 bit GUID.
++ * @guid2:        A pointer to a 128 bit GUID.
++ *
++ * @retval true:  guid1 and guid2 are identical.
++ * @retval false: guid1 and guid2 are not identical.
++ */
++static bool compare_guid(const struct efi_guid *guid1,
++			 const struct efi_guid *guid2)
++{
++	if (memcmp(guid1, guid2, sizeof(struct efi_guid)) == 0)
++		return true;
++	else
++		return false;
++}
++
++u32 __attribute__((optimize("O0"))) find_fsp_header(void)
++{
++	/*
++	 * This function may be called before the a stack is established,
++	 * so special care must be taken. First, it cannot declare any local
++	 * variable using stack. Only register variable can be used here.
++	 * Secondly, some compiler version will add prolog or epilog code
++	 * for the C function. If so the function call may not work before
++	 * stack is ready.
++	 *
++	 * GCC 4.8.1 has been verified to be working for the following codes.
++	 */
++	volatile register u8 *fsp asm("eax");
++
++	/* Initalize the FSP base */
++	fsp = (u8 *)CONFIG_FSP_ADDR;
++
++	/* Check the FV signature, _FVH */
++	if (((struct fv_header *)fsp)->sign == EFI_FVH_SIGNATURE) {
++		/* Go to the end of the FV header and align the address */
++		fsp += ((struct fv_header *)fsp)->ext_hdr_off;
++		fsp += ((struct fv_ext_header *)fsp)->ext_hdr_size;
++		fsp  = (u8 *)(((u32)fsp + 7) & 0xFFFFFFF8);
++	} else {
++		fsp  = 0;
++	}
++
++	/* Check the FFS GUID */
++	if (fsp &&
++	    ((struct ffs_file_header *)fsp)->name.data1 == FSP_GUID_DATA1 &&
++	    ((struct ffs_file_header *)fsp)->name.data2 == FSP_GUID_DATA2 &&
++	    ((struct ffs_file_header *)fsp)->name.data3 == FSP_GUID_DATA3 &&
++	    ((struct ffs_file_header *)fsp)->name.data4[0] == FSP_GUID_DATA4_0 &&
++	    ((struct ffs_file_header *)fsp)->name.data4[1] == FSP_GUID_DATA4_1 &&
++	    ((struct ffs_file_header *)fsp)->name.data4[2] == FSP_GUID_DATA4_2 &&
++	    ((struct ffs_file_header *)fsp)->name.data4[3] == FSP_GUID_DATA4_3 &&
++	    ((struct ffs_file_header *)fsp)->name.data4[4] == FSP_GUID_DATA4_4 &&
++	    ((struct ffs_file_header *)fsp)->name.data4[5] == FSP_GUID_DATA4_5 &&
++	    ((struct ffs_file_header *)fsp)->name.data4[6] == FSP_GUID_DATA4_6 &&
++	    ((struct ffs_file_header *)fsp)->name.data4[7] == FSP_GUID_DATA4_7) {
++		/* Add the FFS header size to find the raw section header */
++		fsp += sizeof(struct ffs_file_header);
++	} else {
++		fsp = 0;
++	}
++
++	if (fsp &&
++	    ((struct raw_section *)fsp)->type == EFI_SECTION_RAW) {
++		/* Add the raw section header size to find the FSP header */
++		fsp += sizeof(struct raw_section);
++	} else {
++		fsp = 0;
++	}
++
++	return (u32)fsp;
++}
++
++void fsp_continue(struct shared_data *shared_data, u32 status, void *hob_list)
++{
++	u32 stack_len;
++	u32 stack_base;
++	u32 stack_top;
++
++	post_code(POST_MRC);
++
++	assert(status == 0);
++
++	/* Get the migrated stack in normal memory */
++	stack_base = (u32)fsp_get_bootloader_tmp_mem(hob_list, &stack_len);
++	assert(stack_base != 0);
++	stack_top  = stack_base + stack_len - sizeof(u32);
++
++	/*
++	 * Old stack base is stored at the very end of the stack top,
++	 * use it to calculate the migrated shared data base
++	 */
++	shared_data = (struct shared_data *)(stack_base +
++			((u32)shared_data - *(u32 *)stack_top));
++
++	/* The boot loader main function entry */
++	fsp_init_done(hob_list);
++}
++
++void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf)
++{
++	struct shared_data shared_data;
++	fsp_init_f init;
++	struct fsp_init_params params;
++	struct fspinit_rtbuf rt_buf;
++	struct vpd_region *fsp_vpd;
++	struct fsp_header *fsp_hdr;
++	struct fsp_init_params *params_ptr;
++	struct upd_region *fsp_upd;
++
++	fsp_hdr = (struct fsp_header *)find_fsp_header();
++	if (fsp_hdr == NULL) {
++		/* No valid FSP info header was found */
++		panic("Invalid FSP header");
++	}
++
++	fsp_upd = (struct upd_region *)&shared_data.fsp_upd;
++	memset(&rt_buf, 0, sizeof(struct fspinit_rtbuf));
++
++	/* Reserve a gap in stack top */
++	rt_buf.common.stack_top = (u32 *)stack_top - 32;
++	rt_buf.common.boot_mode = boot_mode;
++	rt_buf.common.upd_data = (struct upd_region *)fsp_upd;
++
++	/* Get VPD region start */
++	fsp_vpd = (struct vpd_region *)(fsp_hdr->img_base +
++			fsp_hdr->cfg_region_off);
++
++	/* Verifify the VPD data region is valid */
++	assert((fsp_vpd->img_rev == VPD_IMAGE_REV) &&
++	       (fsp_vpd->sign == VPD_IMAGE_ID));
++
++	/* Copy default data from Flash */
++	memcpy(fsp_upd, (void *)(fsp_hdr->img_base + fsp_vpd->upd_offset),
++	       sizeof(struct upd_region));
++
++	/* Verifify the UPD data region is valid */
++	assert(fsp_upd->terminator == UPD_TERMINATOR);
++
++	/* Override any UPD setting if required */
++	update_fsp_upd(fsp_upd);
++
++	memset(&params, 0, sizeof(struct fsp_init_params));
++	params.nvs_buf = nvs_buf;
++	params.rt_buf = (struct fspinit_rtbuf *)&rt_buf;
++	params.continuation = (fsp_continuation_f)asm_continuation;
++
++	init = (fsp_init_f)(fsp_hdr->img_base + fsp_hdr->fsp_init);
++	params_ptr = &params;
++
++	shared_data.fsp_hdr = fsp_hdr;
++	shared_data.stack_top = (u32 *)stack_top;
++
++	post_code(POST_PRE_MRC);
++
++	/*
++	 * Use ASM code to ensure the register value in EAX & ECX
++	 * will be passed into BlContinuationFunc
++	 */
++	asm volatile (
++		"pushl	%0;"
++		"call	*%%eax;"
++		".global asm_continuation;"
++		"asm_continuation:;"
++		"movl	%%ebx, %%eax;"		/* shared_data */
++		"movl	4(%%esp), %%edx;"	/* status */
++		"movl	8(%%esp), %%ecx;"	/* hob_list */
++		"jmp	fsp_continue;"
++		: : "m"(params_ptr), "a"(init), "b"(&shared_data)
++	);
++
++	/*
++	 * Should never get here.
++	 * Control will continue from fsp_continue.
++	 * This line below is to prevent the compiler from optimizing
++	 * structure intialization.
++	 *
++	 * DO NOT REMOVE!
++	 */
++	init(&params);
++}
++
++u32 fsp_notify(struct fsp_header *fsp_hdr, u32 phase)
++{
++	fsp_notify_f notify;
++	struct fsp_notify_params params;
++	struct fsp_notify_params *params_ptr;
++	u32 status;
++
++	if (!fsp_hdr)
++		fsp_hdr = (struct fsp_header *)find_fsp_header();
++
++	if (fsp_hdr == NULL) {
++		/* No valid FSP info header */
++		panic("Invalid FSP header");
++	}
++
++	notify = (fsp_notify_f)(fsp_hdr->img_base + fsp_hdr->fsp_notify);
++	params.phase = phase;
++	params_ptr = &params;
++
++	/*
++	 * Use ASM code to ensure correct parameter is on the stack for
++	 * FspNotify as U-Boot is using different ABI from FSP
++	 */
++	asm volatile (
++		"pushl	%1;"		/* push notify phase */
++		"call	*%%eax;"	/* call FspNotify */
++		"addl	$4, %%esp;"	/* clean up the stack */
++		: "=a"(status) : "m"(params_ptr), "a"(notify), "m"(*params_ptr)
++	);
++
++	return status;
++}
++
++u32 fsp_get_usable_lowmem_top(const void *hob_list)
++{
++	union hob_pointers hob;
++	phys_addr_t phys_start;
++	u32 top;
++
++	/* Get the HOB list for processing */
++	hob.raw = (void *)hob_list;
++
++	/* * Collect memory ranges */
++	top = FSP_LOWMEM_BASE;
++	while (!end_of_hob(hob)) {
++		if (get_hob_type(hob) == HOB_TYPE_RES_DESC) {
++			if (hob.res_desc->type == RES_SYS_MEM) {
++				phys_start = hob.res_desc->phys_start;
++				/* Need memory above 1MB to be collected here */
++				if (phys_start >= FSP_LOWMEM_BASE &&
++				    phys_start < (phys_addr_t)FSP_HIGHMEM_BASE)
++					top += (u32)(hob.res_desc->len);
++			}
++		}
++		hob.raw = get_next_hob(hob);
++	}
++
++	return top;
++}
++
++u64 fsp_get_usable_highmem_top(const void *hob_list)
++{
++	union hob_pointers hob;
++	phys_addr_t phys_start;
++	u64 top;
++
++	/* Get the HOB list for processing */
++	hob.raw = (void *)hob_list;
++
++	/* Collect memory ranges */
++	top = FSP_HIGHMEM_BASE;
++	while (!end_of_hob(hob)) {
++		if (get_hob_type(hob) == HOB_TYPE_RES_DESC) {
++			if (hob.res_desc->type == RES_SYS_MEM) {
++				phys_start = hob.res_desc->phys_start;
++				/* Need memory above 1MB to be collected here */
++				if (phys_start >= (phys_addr_t)FSP_HIGHMEM_BASE)
++					top += (u32)(hob.res_desc->len);
++			}
++		}
++		hob.raw = get_next_hob(hob);
++	}
++
++	return top;
++}
++
++u64 fsp_get_reserved_mem_from_guid(const void *hob_list, u64 *len,
++				   struct efi_guid *guid)
++{
++	union hob_pointers hob;
++
++	/* Get the HOB list for processing */
++	hob.raw = (void *)hob_list;
++
++	/* Collect memory ranges */
++	while (!end_of_hob(hob)) {
++		if (get_hob_type(hob) == HOB_TYPE_RES_DESC) {
++			if (hob.res_desc->type == RES_MEM_RESERVED) {
++				if (compare_guid(&hob.res_desc->owner, guid)) {
++					if (len)
++						*len = (u32)(hob.res_desc->len);
++
++					return (u64)(hob.res_desc->phys_start);
++				}
++			}
++		}
++		hob.raw = get_next_hob(hob);
++	}
++
++	return 0;
++}
++
++u32 fsp_get_fsp_reserved_mem(const void *hob_list, u32 *len)
++{
++	const struct efi_guid guid = FSP_HOB_RESOURCE_OWNER_FSP_GUID;
++	u64 length;
++	u32 base;
++
++	base = (u32)fsp_get_reserved_mem_from_guid(hob_list,
++			&length, (struct efi_guid *)&guid);
++	if ((len != 0) && (base != 0))
++		*len = (u32)length;
++
++	return base;
++}
++
++u32 fsp_get_tseg_reserved_mem(const void *hob_list, u32 *len)
++{
++	const struct efi_guid guid = FSP_HOB_RESOURCE_OWNER_TSEG_GUID;
++	u64 length;
++	u32 base;
++
++	base = (u32)fsp_get_reserved_mem_from_guid(hob_list,
++			&length, (struct efi_guid *)&guid);
++	if ((len != 0) && (base != 0))
++		*len = (u32)length;
++
++	return base;
++}
++
++void *fsp_get_next_hob(u16 type, const void *hob_list)
++{
++	union hob_pointers hob;
++
++	assert(hob_list != NULL);
++
++	hob.raw = (u8 *)hob_list;
++
++	/* Parse the HOB list until end of list or matching type is found */
++	while (!end_of_hob(hob)) {
++		if (get_hob_type(hob) == type)
++			return hob.raw;
++
++		hob.raw = get_next_hob(hob);
++	}
++
++	return NULL;
++}
++
++void *fsp_get_next_guid_hob(const struct efi_guid *guid, const void *hob_list)
++{
++	union hob_pointers hob;
++
++	hob.raw = (u8 *)hob_list;
++	while ((hob.raw = fsp_get_next_hob(HOB_TYPE_GUID_EXT,
++			hob.raw)) != NULL) {
++		if (compare_guid(guid, &hob.guid->name))
++			break;
++		hob.raw = get_next_hob(hob);
++	}
++
++	return hob.raw;
++}
++
++void *fsp_get_guid_hob_data(const void *hob_list, u32 *len,
++			    struct efi_guid *guid)
++{
++	u8 *guid_hob;
++
++	guid_hob = fsp_get_next_guid_hob(guid, hob_list);
++	if (guid_hob == NULL) {
++		return NULL;
++	} else {
++		if (len)
++			*len = get_guid_hob_data_size(guid_hob);
++
++		return get_guid_hob_data(guid_hob);
++	}
++}
++
++void *fsp_get_nvs_data(const void *hob_list, u32 *len)
++{
++	const struct efi_guid guid = FSP_NON_VOLATILE_STORAGE_HOB_GUID;
++
++	return fsp_get_guid_hob_data(hob_list, len, (struct efi_guid *)&guid);
++}
++
++void *fsp_get_bootloader_tmp_mem(const void *hob_list, u32 *len)
++{
++	const struct efi_guid guid = FSP_BOOTLOADER_TEMP_MEM_HOB_GUID;
++
++	return fsp_get_guid_hob_data(hob_list, len, (struct efi_guid *)&guid);
++}
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Kconfig u-boot/arch/x86/cpu/queensbay/Kconfig
+--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/cpu/queensbay/Kconfig	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,79 @@
++#
++# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++#
++# SPDX-License-Identifier:	GPL-2.0+
++#
++
++config INTEL_QUEENSBAY
++	bool
++	select HAVE_FSP
++	select HAVE_CMC
++
++if INTEL_QUEENSBAY
++
++config HAVE_FSP
++	bool "Add an Firmware Support Package binary"
++	help
++	  Select this option to add an Firmware Support Package binary to
++	  the resulting U-Boot image. It is a binary blob which U-Boot uses
++	  to set up SDRAM and other chipset specific initialization.
++
++	  Note: Without this binary U-Boot will not be able to set up its
++	  SDRAM so will not boot.
++
++config FSP_FILE
++	string "Firmware Support Package binary filename"
++	depends on HAVE_FSP
++	default "fsp.bin"
++	help
++	  The filename of the file to use as Firmware Support Package binary
++	  in the board directory.
++
++config FSP_ADDR
++	hex "Firmware Support Package binary location"
++	depends on HAVE_FSP
++	default 0xfffc0000
++	help
++	  FSP is not Position Independent Code (PIC) and the whole FSP has to
++	  be rebased if it is placed at a location which is different from the
++	  perferred base address specified during the FSP build. Use Intel's
++	  Binary Configuration Tool (BCT) to do the rebase.
++
++	  The default base address of 0xfffc0000 indicates that the binary must
++	  be located at offset 0xc0000 from the beginning of a 1MB flash device.
++
++config FSP_TEMP_RAM_ADDR
++	hex
++	default 0x2000000
++	help
++	  Stack top address which is used in FspInit after DRAM is ready and
++	  CAR is disabled.
++
++config HAVE_CMC
++	bool "Add a Chipset Micro Code state machine binary"
++	help
++	  Select this option to add a Chipset Micro Code state machine binary
++	  to the resulting U-Boot image. It is a 64K data block of machine
++	  specific code which must be put in the flash for the processor to
++	  access when powered up before system BIOS is executed.
++
++config CMC_FILE
++	string "Chipset Micro Code state machine filename"
++	depends on HAVE_CMC
++	default "cmc.bin"
++	help
++	  The filename of the file to use as Chipset Micro Code state machine
++	  binary in the board directory.
++
++config CMC_ADDR
++	hex "Chipset Micro Code state machine binary location"
++	depends on HAVE_CMC
++	default 0xfffb0000
++	help
++	  The location of the CMC binary is determined by a strap. It must be
++	  put in flash at a location matching the strap-determined base address.
++
++	  The default base address of 0xfffb0000 indicates that the binary must
++	  be located at offset 0xb0000 from the beginning of a 1MB flash device.
++
++endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Makefile u-boot/arch/x86/cpu/queensbay/Makefile
+--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/cpu/queensbay/Makefile	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,9 @@
++#
++# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++#
++# SPDX-License-Identifier:	GPL-2.0+
++#
++
++obj-y += tnc_car.o tnc_dram.o tnc.o topcliff.o
++obj-y += fsp_configs.o fsp_support.o
++obj-$(CONFIG_PCI) += tnc_pci.o
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc.c u-boot/arch/x86/cpu/queensbay/tnc.c
+--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/cpu/queensbay/tnc.c	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,72 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/pci.h>
++#include <asm/post.h>
++#include <asm/arch/tnc.h>
++#include <asm/arch/fsp/fsp_support.h>
++#include <asm/processor.h>
++
++static void unprotect_spi_flash(void)
++{
++	u32 bc;
++
++	bc = pci_read_config32(PCH_LPC_DEV, 0xd8);
++	bc |= 0x1;	/* unprotect the flash */
++	pci_write_config32(PCH_LPC_DEV, 0xd8, bc);
++}
++
++int arch_cpu_init(void)
++{
++	struct pci_controller *hose;
++	int ret;
++
++	post_code(POST_CPU_INIT);
++#ifdef CONFIG_SYS_X86_TSC_TIMER
++	timer_set_base(rdtsc());
++#endif
++
++	ret = x86_cpu_init_f();
++	if (ret)
++		return ret;
++
++	ret = pci_early_init_hose(&hose);
++	if (ret)
++		return ret;
++
++	unprotect_spi_flash();
++
++	return 0;
++}
++
++int print_cpuinfo(void)
++{
++	post_code(POST_CPU_INFO);
++	return default_print_cpuinfo();
++}
++
++void reset_cpu(ulong addr)
++{
++	/* cold reset */
++	outb(0x06, PORT_RESET);
++}
++
++void board_final_cleanup(void)
++{
++	u32 status;
++
++	/* call into FspNotify */
++	debug("Calling into FSP (notify phase INIT_PHASE_BOOT): ");
++	status = fsp_notify(NULL, INIT_PHASE_BOOT);
++	if (status != FSP_SUCCESS)
++		debug("fail, error code %x\n", status);
++	else
++		debug("OK\n");
++
++	return;
++}
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_car.S u-boot/arch/x86/cpu/queensbay/tnc_car.S
+--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_car.S	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/cpu/queensbay/tnc_car.S	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,124 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <config.h>
++#include <asm/post.h>
++
++.globl car_init
++car_init:
++	/*
++	 * Note: ebp holds the BIST value (built-in self test) so far, but ebp
++	 * will be destroyed through the FSP call, thus we have to test the
++	 * BIST value here before we call into FSP.
++	 */
++	test	%ebp, %ebp
++	jz	car_init_start
++	post_code(POST_BIST_FAILURE)
++	jmp	die
++
++car_init_start:
++	post_code(POST_CAR_START)
++	lea	find_fsp_header_romstack, %esp
++	jmp	find_fsp_header
++
++find_fsp_header_ret:
++	/* EAX points to FSP_INFO_HEADER */
++	mov	%eax, %ebp
++
++	/* sanity test */
++	cmp	$CONFIG_FSP_ADDR, %eax
++	jb	die
++
++	/* calculate TempRamInitEntry address */
++	mov	0x30(%ebp), %eax
++	add	0x1c(%ebp), %eax
++
++	/* call FSP TempRamInitEntry to setup temporary stack */
++	lea	temp_ram_init_romstack, %esp
++	jmp	*%eax
++
++temp_ram_init_ret:
++	addl	$4, %esp
++	cmp	$0, %eax
++	jnz	car_init_fail
++
++	post_code(POST_CAR_CPU_CACHE)
++
++	/*
++	 * The FSP TempRamInit initializes the ecx and edx registers to
++	 * point to a temporary but writable memory range (Cache-As-RAM).
++	 * ecx: the start of this temporary memory range,
++	 * edx: the end of this range.
++	 */
++
++	/* stack grows down from top of CAR */
++	movl	%edx, %esp
++
++	/*
++	 * TODO:
++	 *
++	 * According to FSP architecture spec, the fsp_init() will not return
++	 * to its caller, instead it requires the bootloader to provide a
++	 * so-called continuation function to pass into the FSP as a parameter
++	 * of fsp_init, and fsp_init() will call that continuation function
++	 * directly.
++	 *
++	 * The call to fsp_init() may need to be moved out of the car_init()
++	 * to cpu_init_f() with the help of some inline assembly codes.
++	 * Note there is another issue that fsp_init() will setup another stack
++	 * using the fsp_init parameter stack_top after DRAM is initialized,
++	 * which means any data on the previous stack (on the CAR) gets lost
++	 * (ie: U-Boot global_data). FSP is supposed to support such scenario,
++	 * however it does not work. This should be revisited in the future.
++	 */
++	movl	$CONFIG_FSP_TEMP_RAM_ADDR, %eax
++	xorl	%edx, %edx
++	xorl	%ecx, %ecx
++	call	fsp_init
++
++.global fsp_init_done
++fsp_init_done:
++	/*
++	 * We come here from FspInit with eax pointing to the HOB list.
++	 * Save eax to esi temporarily.
++	 */
++	movl	%eax, %esi
++	/*
++	 * Re-initialize the ebp (BIST) to zero, as we already reach here
++	 * which means we passed BIST testing before.
++	 */
++	xorl	%ebp, %ebp
++	jmp	car_init_ret
++
++car_init_fail:
++	post_code(POST_CAR_FAILURE)
++
++die:
++	hlt
++	jmp	die
++	hlt
++
++	/*
++	 * The function call before CAR initialization is tricky. It cannot
++	 * be called using the 'call' instruction but only the 'jmp' with
++	 * the help of a handcrafted stack in the ROM. The stack needs to
++	 * contain the function return address as well as the parameters.
++	 */
++	.balign	4
++find_fsp_header_romstack:
++	.long	find_fsp_header_ret
++
++	.balign	4
++temp_ram_init_romstack:
++	.long	temp_ram_init_ret
++	.long	temp_ram_init_params
++temp_ram_init_params:
++_dt_ucode_base_size:
++	/* These next two fields are filled in by ifdtool */
++	.long	0			/* microcode base */
++	.long	0			/* microcode size */
++	.long	CONFIG_SYS_MONITOR_BASE	/* code region base */
++	.long	CONFIG_SYS_MONITOR_LEN	/* code region size */
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_dram.c u-boot/arch/x86/cpu/queensbay/tnc_dram.c
+--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_dram.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/cpu/queensbay/tnc_dram.c	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,78 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/arch/fsp/fsp_support.h>
++#include <asm/e820.h>
++#include <asm/post.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++int dram_init(void)
++{
++	phys_size_t ram_size = 0;
++	union hob_pointers hob;
++
++	hob.raw = gd->arch.hob_list;
++	while (!end_of_hob(hob)) {
++		if (get_hob_type(hob) == HOB_TYPE_RES_DESC) {
++			if (hob.res_desc->type == RES_SYS_MEM ||
++			    hob.res_desc->type == RES_MEM_RESERVED) {
++				ram_size += hob.res_desc->len;
++			}
++		}
++		hob.raw = get_next_hob(hob);
++	}
++
++	gd->ram_size = ram_size;
++	post_code(POST_DRAM);
++
++	return 0;
++}
++
++void dram_init_banksize(void)
++{
++	gd->bd->bi_dram[0].start = 0;
++	gd->bd->bi_dram[0].size = gd->ram_size;
++}
++
++/*
++ * This function looks for the highest region of memory lower than 4GB which
++ * has enough space for U-Boot where U-Boot is aligned on a page boundary.
++ * It overrides the default implementation found elsewhere which simply
++ * picks the end of ram, wherever that may be. The location of the stack,
++ * the relocation address, and how far U-Boot is moved by relocation are
++ * set in the global data structure.
++ */
++ulong board_get_usable_ram_top(ulong total_size)
++{
++	return fsp_get_usable_lowmem_top(gd->arch.hob_list);
++}
++
++unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
++{
++	unsigned num_entries = 0;
++
++	union hob_pointers hob;
++
++	hob.raw = gd->arch.hob_list;
++
++	while (!end_of_hob(hob)) {
++		if (get_hob_type(hob) == HOB_TYPE_RES_DESC) {
++			entries[num_entries].addr = hob.res_desc->phys_start;
++			entries[num_entries].size = hob.res_desc->len;
++
++			if (hob.res_desc->type == RES_SYS_MEM)
++				entries[num_entries].type = E820_RAM;
++			else if (hob.res_desc->type == RES_MEM_RESERVED)
++				entries[num_entries].type = E820_RESERVED;
++		}
++		hob.raw = get_next_hob(hob);
++		num_entries++;
++	}
++
++	return num_entries;
++}
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_pci.c u-boot/arch/x86/cpu/queensbay/tnc_pci.c
+--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/tnc_pci.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/cpu/queensbay/tnc_pci.c	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,61 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <pci.h>
++#include <asm/pci.h>
++#include <asm/arch/fsp/fsp_support.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++void board_pci_setup_hose(struct pci_controller *hose)
++{
++	hose->first_busno = 0;
++	hose->last_busno = 0;
++
++	/* PCI memory space */
++	pci_set_region(hose->regions + 0,
++		       CONFIG_PCI_MEM_BUS,
++		       CONFIG_PCI_MEM_PHYS,
++		       CONFIG_PCI_MEM_SIZE,
++		       PCI_REGION_MEM);
++
++	/* PCI IO space */
++	pci_set_region(hose->regions + 1,
++		       CONFIG_PCI_IO_BUS,
++		       CONFIG_PCI_IO_PHYS,
++		       CONFIG_PCI_IO_SIZE,
++		       PCI_REGION_IO);
++
++	pci_set_region(hose->regions + 2,
++		       CONFIG_PCI_PREF_BUS,
++		       CONFIG_PCI_PREF_PHYS,
++		       CONFIG_PCI_PREF_SIZE,
++		       PCI_REGION_PREFETCH);
++
++	pci_set_region(hose->regions + 3,
++		       0,
++		       0,
++		       gd->ram_size,
++		       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
++
++	hose->region_count = 4;
++}
++
++int board_pci_post_scan(struct pci_controller *hose)
++{
++	u32 status;
++
++	/* call into FspNotify */
++	debug("Calling into FSP (notify phase INIT_PHASE_PCI): ");
++	status = fsp_notify(NULL, INIT_PHASE_PCI);
++	if (status != FSP_SUCCESS)
++		debug("fail, error code %x\n", status);
++	else
++		debug("OK\n");
++
++	return 0;
++}
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/queensbay/topcliff.c u-boot/arch/x86/cpu/queensbay/topcliff.c
+--- u-boot-2015.01-rc3/arch/x86/cpu/queensbay/topcliff.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/cpu/queensbay/topcliff.c	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,47 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <errno.h>
++#include <malloc.h>
++#include <pci.h>
++#include <pci_ids.h>
++#include <sdhci.h>
++
++static struct pci_device_id mmc_supported[] = {
++	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_0 },
++	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_1 },
++	{ }
++};
++
++int cpu_mmc_init(bd_t *bis)
++{
++	struct sdhci_host *mmc_host;
++	pci_dev_t devbusfn;
++	u32 iobase;
++	int ret;
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(mmc_supported); i++) {
++		devbusfn =  pci_find_devices(mmc_supported, i);
++		if (devbusfn == -1)
++			return -ENODEV;
++
++		mmc_host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
++		if (!mmc_host)
++			return -ENOMEM;
++
++		mmc_host->name = "Topcliff SDHCI";
++		pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &iobase);
++		mmc_host->ioaddr = (void *)iobase;
++		mmc_host->quirks = 0;
++		ret = add_sdhci(mmc_host, 0, 0);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
+diff -ruN u-boot-2015.01-rc3/arch/x86/cpu/start.S u-boot/arch/x86/cpu/start.S
+--- u-boot-2015.01-rc3/arch/x86/cpu/start.S	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/cpu/start.S	2015-01-01 17:34:32.253503252 +0100
+@@ -1,5 +1,5 @@
+ /*
+- *  U-boot - x86 Startup Code
++ *  U-Boot - x86 Startup Code
+  *
+  * (C) Copyright 2008-2011
+  * Graeme Russ, <graeme.russ@gmail.com>
+@@ -17,6 +17,7 @@
+ #include <asm/processor.h>
+ #include <asm/processor-flags.h>
+ #include <generated/generic-asm-offsets.h>
++#include <generated/asm-offsets.h>
+ 
+ .section .text
+ .code32
+@@ -74,6 +75,7 @@
+ 	jmp	car_init
+ .globl car_init_ret
+ car_init_ret:
++#ifndef CONFIG_HAVE_FSP
+ 	/*
+ 	 * We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
+ 	 * or fully initialised SDRAM - we really don't care which)
+@@ -94,6 +96,12 @@
+ #ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
+ 	subl	$CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
+ #endif
++#else
++	/*
++	 * When we get here after car_init, esp points to a temporary stack
++	 * and esi holds the HOB list address returned by the FSP.
++	 */
++#endif
+ 
+ 	/* Reserve space on stack for global data */
+ 	subl	$GENERATED_GBL_DATA_SIZE, %esp
+@@ -108,6 +116,13 @@
+ 	movl	%esp, %edi
+ 	rep	stosb
+ 
++#ifdef CONFIG_HAVE_FSP
++	/* Store HOB list */
++	movl	%esp, %edx
++	addl	$GD_HOB_LIST, %edx
++	movl	%esi, (%edx)
++#endif
++
+ 	/* Setup first parameter to setup_gdt, pointer to global_data */
+ 	movl	%esp, %eax
+ 
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/chromebook_link.dts u-boot/arch/x86/dts/chromebook_link.dts
+--- u-boot-2015.01-rc3/arch/x86/dts/chromebook_link.dts	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/dts/chromebook_link.dts	2015-01-01 17:34:32.253503252 +0100
+@@ -214,10 +214,10 @@
+ 
+ 	microcode {
+ 		update@0 {
+-#include "m12206a7_00000028.dtsi"
++#include "microcode/m12206a7_00000029.dtsi"
+ 		};
+ 		update@1 {
+-#include "m12306a9_00000017.dtsi"
++#include "microcode/m12306a9_0000001b.dtsi"
+ 		};
+ 	};
+ 
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/coreboot.dtsi u-boot/arch/x86/dts/coreboot.dtsi
+--- u-boot-2015.01-rc3/arch/x86/dts/coreboot.dtsi	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/dts/coreboot.dtsi	2015-01-01 17:34:32.253503252 +0100
+@@ -6,7 +6,7 @@
+ 	};
+ 
+ 	serial {
+-		compatible = "coreboot-uart";
++		compatible = "x86-uart";
+ 		reg = <0x3f8 0x10>;
+ 		reg-shift = <0>;
+ 		io-mapped = <1>;
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/crownbay.dts u-boot/arch/x86/dts/crownbay.dts
+--- u-boot-2015.01-rc3/arch/x86/dts/crownbay.dts	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/dts/crownbay.dts	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,60 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++/dts-v1/;
++
++/include/ "coreboot.dtsi"
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Intel Crown Bay";
++	compatible = "intel,crownbay", "intel,queensbay";
++
++	config {
++		silent_console = <0>;
++	};
++
++	gpioa {
++		compatible = "intel,ich6-gpio";
++		u-boot,dm-pre-reloc;
++		reg = <0 0x20>;
++		bank-name = "A";
++	};
++
++	gpiob {
++		compatible = "intel,ich6-gpio";
++		u-boot,dm-pre-reloc;
++		reg = <0x20 0x20>;
++		bank-name = "B";
++	};
++
++	serial {
++		reg = <0x3f8 8>;
++		clock-frequency = <115200>;
++	};
++
++	chosen { };
++	memory { device_type = "memory"; reg = <0 0>; };
++
++	spi {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		compatible = "intel,ich7";
++		spi-flash@0 {
++			reg = <0>;
++			compatible = "sst,25vf016b", "spi-flash";
++			memory-map = <0xffe00000 0x00200000>;
++		};
++	};
++
++	microcode {
++		update@0 {
++#include "microcode/m0220661105_cv.dtsi"
++		};
++	};
++
++};
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/arch/x86/dts/include/dt-bindings/pinctrl/pinctrl-tegra.h
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/include/dt-bindings/reset/altr,rst-mgr.h u-boot/arch/x86/dts/include/dt-bindings/reset/altr,rst-mgr.h
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/link.dts u-boot/arch/x86/dts/link.dts
+--- u-boot-2015.01-rc3/arch/x86/dts/link.dts	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/dts/link.dts	2015-01-01 17:34:32.253503252 +0100
+@@ -214,10 +214,10 @@
+ 
+ 	microcode {
+ 		update@0 {
+-#include "m12206a7_00000028.dtsi"
++#include "microcode/m12206a7_00000029.dtsi"
+ 		};
+ 		update@1 {
+-#include "m12306a9_00000017.dtsi"
++#include "microcode/m12306a9_0000001b.dtsi"
+ 		};
+ 	};
+ 
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/m12206a7_00000028.dtsi u-boot/arch/x86/dts/m12206a7_00000028.dtsi
+--- u-boot-2015.01-rc3/arch/x86/dts/m12206a7_00000028.dtsi	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/dts/m12206a7_00000028.dtsi	1970-01-01 01:00:00.000000000 +0100
+@@ -1,622 +0,0 @@
+-/*
+- * Copyright (c) <1995-2013>, Intel Corporation.
+- * All rights reserved.
+- *
+- * Redistribution. Redistribution and use in binary form, without modification, are
+- * permitted provided that the following conditions are met:
+- *	.Redistributions must reproduce the above copyright notice and the following
+- * disclaimer in the documentation and/or other materials provided with the
+- * distribution.
+- * Neither the name of Intel Corporation nor the names of its suppliers may be used
+- * to endorse or promote products derived from this software without specific prior
+- * written permission.
+- *	.No reverse engineering, decompilation, or disassembly of this software is
+- * permitted.
+- *	."Binary form" includes any format commonly used for electronic conveyance
+- * which is a reversible, bit-exact translation of binary representation to ASCII or
+- * ISO text, for example, "uuencode."
+- *
+- * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
+- * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
+- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+- * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+- *
+- *---
+- * This is a device tree fragment. Use #include to add these properties to a
+- * node.
+- */
+-
+-compatible = "intel,microcode";
+-intel,header-version = <1>;
+-intel,update-revision = <0x28>;
+-intel,date-code = <0x04242012>;
+-intel,processor-signature = <0x000206a7>;
+-intel,checksum = <0xf3e9935d>;
+-intel,loader-revision = <1>;
+-intel,processor-flags = <0x12>;
+-
+-/* The 48-byte public header is omitted. */
+-data = <
+-	0x00000000	0x000000a1	0x00020001	0x00000028
+-	0x00000000	0x00000000	0x20120423	0x000008f1
+-	0x00000001	0x000206a7	0x00000000	0x00000000
+-	0x00000000	0x00000000	0x00000000	0x00000000
+-	0x00000000	0x000008f1	0x00000000	0x00000000
+-	0x00000000	0x00000000	0x00000000	0x00000000
+-	0x52b813ac	0xdb8994c7	0x70e9f6bb	0x9d6db2ff
+-	0xf4d70f5d	0x5b1eccf6	0xac59106f	0x0ae2e2c1
+-	0x1a7bbeb1	0x355a1d62	0x2e7eb594	0x09f8dea9
+-	0x432a49e4	0xbf520253	0xdafa4010	0x893a858a
+-	0x766e0efb	0xd91e196d	0x838bd2ef	0xe5146494
+-	0xd515f413	0x29704828	0xe85598b6	0xdcbe6c51
+-	0x88eabbfa	0xa1e8909f	0xd8931721	0x35386554
+-	0x089a78a7	0xd9914775	0xd4644748	0x1556a4dc
+-	0xf44448f6	0xd054d7db	0xf30f2b7d	0x5ae223d0
+-	0xcbbb48b0	0x5c8b0383	0x177de157	0x9c1e5f73
+-	0x2ec28289	0xd72a7b6c	0x823b6eb2	0x35e02171
+-	0xba8deae4	0x06f4d468	0x13dbafaa	0x72b419f1
+-	0x033385b5	0x05806920	0x4c6034cf	0x9bd117dc
+-	0x976e2d04	0x250330f0	0x7250b5e1	0x184980c2
+-	0x12a9d7d6	0x1bc808f9	0xae79994f	0xc6f87901
+-	0xc0e3132f	0x671491c5	0x236cad39	0x37889d9c
+-	0x67f7c3f3	0x964a6be5	0xbcced7da	0x57eeaa6e
+-	0x7bca1522	0x654fee4c	0x2a1ca5d9	0xa1803cf3
+-	0x00000011	0x8c316d2c	0x17603b7e	0x32e42981
+-	0xc26c1400	0xf0fbccb6	0xeab6b43a	0x11d456a5
+-	0x5b912d46	0x15195fe0	0x542f6db3	0x0b7f212e
+-	0x47718dd9	0x7c41b108	0x06c21111	0x4445d5ea
+-	0xb4fb8128	0xe07404a6	0x8d503da4	0x78fc7e44
+-	0xb9919656	0x9968c797	0x87f26ab0	0x23bb1af7
+-	0x1ec5d761	0x26f30d2c	0x7cdb747c	0xe4d42033
+-	0x8a5d4801	0x768aff57	0xbcfd5d11	0x7c853c2d
+-	0x231e6207	0x8b1988a6	0xd68fdb75	0x58dcb417
+-	0x44422ef9	0x2a186ebb	0x7d27e85f	0x36ac31f7
+-	0x1e487e77	0x2b0b8c37	0xd8ba682f	0x2cba791b
+-	0xe6d3dece	0x1b2c2a99	0x4e5decab	0xfbd313a3
+-	0xdbc78294	0x5a80cce7	0x2d8e0f0b	0xcf564f71
+-	0x073d1f37	0x25162870	0x96cdb85b	0x9c553048
+-	0x24eba740	0xfc0f352e	0x0c83be68	0x89b5076c
+-	0xc39c4355	0x6a4cf25c	0x2bbd2682	0xc524fdb9
+-	0x7ea19bae	0x191ad6f1	0xd3fbf3bf	0x21bf77fa
+-	0x8f77fec4	0x0f90f635	0xe55e165c	0x868d58c0
+-	0x966bc0ad	0x6c276364	0x9d8f7eff	0x4b7925d4
+-	0x8b2f9326	0x4ab7b47e	0x33a9087c	0xf31ab949
+-	0x69831dfb	0x4711a215	0x8128c1fa	0x8481c213
+-	0x7401b01b	0xfdcfdc50	0xd6b55266	0xae9b23ac
+-	0xfa2ad275	0xa225bb45	0x4dd720c4	0x760a20e6
+-	0x5f1223c9	0x2f334372	0x6e1dcdab	0xe8ee8638
+-	0x1c19ba8a	0xef9341c4	0x360aaa9d	0x90452ea9
+-	0x65852446	0xe9398fa3	0xbba6a631	0x1a3e90b9
+-	0xe2a73a56	0x6e8c0747	0x35c7c53d	0xcc1ac842
+-	0x183356af	0xb6e98608	0x987b43c2	0xa8a3cfd2
+-	0xc2c5fce0	0xcc3af64a	0xd6d3a291	0xe59ad1f5
+-	0x124ca513	0x9522b50a	0x25150477	0xa2eb5797
+-	0x7fc63626	0x648c48e3	0x9f5797ff	0x2307b84d
+-	0x980625a4	0xabc05983	0x24980807	0x773c4f99
+-	0x3407b872	0x07c3657a	0xa2cd9e48	0x49c1e6a8
+-	0xa881b84c	0xf804d72c	0xb5319d2a	0x3e39780f
+-	0x97518822	0x0acd54c2	0x0721a9ff	0x10e1d2fd
+-	0xa7b6db77	0x845b1a56	0xef00160e	0x6b41bfd5
+-	0xc994df0d	0xcf44a5ca	0x794b36a4	0xf9fdb127
+-	0x922a1366	0x822aa8a9	0x4b137bd5	0x5722a49f
+-	0x8933719a	0x17edc1a9	0x079d9538	0x21fae7d5
+-	0xe534fd73	0x9d3038d5	0x48c3a056	0x5b22d58a
+-	0x6f142866	0xf1d767cd	0xb51ad5a6	0x34a0ef85
+-	0x0111703e	0xca4b3a30	0xa0f3c34d	0x9d48775a
+-	0x3f2059f9	0xf2fe2c36	0x588861a9	0xed5bd9fe
+-	0x8231f7cb	0x8c115969	0x3f82ba00	0x21b3730c
+-	0xba757997	0x3ec0bb2c	0x16f11def	0x5d4356c6
+-	0xdc2e0bc2	0x58c1eb6e	0x313ede0c	0xb68fcc52
+-	0x84d3e1b5	0xcc6d9201	0x95046196	0x276b527b
+-	0x80a4a729	0xe782916d	0x5cf09e0b	0x98aaf9fa
+-	0x1de6dd43	0xab4f1962	0x49ece734	0x81455488
+-	0xc2597b61	0x5b22af85	0x646f7b94	0x09213a1f
+-	0x08edf7e4	0x963d343c	0x059ba888	0xb4e804ed
+-	0xe7cc826c	0xf87bafc7	0xeecaec10	0x8e60919c
+-	0xbf14c996	0xd3dcaee3	0xb8fa0b7e	0x81563c6e
+-	0x7f59a258	0x2f344446	0x374d8aa6	0x9b6de5c9
+-	0xbf992857	0xbc5b94fc	0x28adb080	0x17e41044
+-	0xb87b469e	0xda504d12	0xf21bef8b	0xce75c1e3
+-	0xdbd92c83	0x58bba0af	0x77b42977	0x506cfd75
+-	0x1139e875	0x6ce5fe43	0xc6a5d7b3	0x87f9e628
+-	0x7b5c500b	0x130066b3	0x789b611f	0xec8c1ba9
+-	0xb7e6872d	0xaf828cd6	0xc28d3316	0x2a91f6d0
+-	0xc725f063	0x065ac531	0x4f9ef4b8	0x2b9d927e
+-	0xaf54f3f9	0x7c924f72	0xda1d77ad	0xff00db67
+-	0xaf4f03c0	0xb4f4ee64	0x169e64e5	0x04653ac0
+-	0xed51cb70	0xfeaff0e5	0x51dbf346	0x072a2407
+-	0x23fb74f4	0x9a906eef	0x5d6fc3f0	0xbc3c374c
+-	0x1cf9f063	0x919015d9	0x5b3e9d07	0xd6209d8b
+-	0xa3710b3d	0x90ad23b8	0x420ceedc	0x58e8371f
+-	0x5d419d1f	0xb8acd13f	0x7d100d6d	0x210c10d1
+-	0xcd0a697e	0x5023db4b	0x33e6d8e7	0x44bbe6b4
+-	0x827e859f	0x6ca4cc81	0x661bb2c3	0x71209ee8
+-	0xb8c3ffaf	0xd1075f51	0xba1eae10	0x728b0a6a
+-	0xe4af7a2f	0xca9bcf2e	0xb249a631	0xdce6be47
+-	0x5c910321	0x425c3c27	0x33083e43	0xdea067ae
+-	0xea594a23	0x41b75c2c	0x3a401a95	0xd33cd88a
+-	0xc295cad0	0x67f48045	0x1dc9ad4c	0x4bc48864
+-	0x53991b6e	0x7aadde5f	0x2b0bf775	0x06ba5380
+-	0x9eb874be	0x2c4b967a	0x1bcc342f	0xe875001b
+-	0x15b5642d	0x5be99c9d	0xcb210ace	0x1b4924ad
+-	0x3793ed81	0x8b983114	0x3ec33981	0x75ec71e7
+-	0x8b5b7df3	0x834756f4	0x100fad01	0x70037fdf
+-	0x0cef9a36	0x3d9e3a2d	0x38b48efd	0xfc4034b6
+-	0xa32e29dd	0x388944bc	0xc1c15614	0x3877e9c7
+-	0xa5e733fa	0xa621bd53	0x4b651df6	0xce082970
+-	0x85f30d6f	0x729a5c87	0x31dd7ba9	0xdb495828
+-	0x7b12c698	0x953495c9	0x6b5f99e7	0x2cc42fa8
+-	0x697ac512	0x1be679de	0xc116d305	0x94a36606
+-	0x9e5e141e	0x874affed	0x58d40b0b	0x5e3cf5e5
+-	0x5d05e9a9	0x06840efc	0xd2f98b21	0xa1e83ab2
+-	0x4f726202	0xa6394535	0x62a02403	0x9f2167ec
+-	0x4f9fc77b	0x98073be4	0x2bc781fa	0xfc8e4c89
+-	0xc7179b97	0x692cf793	0x708ff7bb	0x12ecba93
+-	0xacd06e21	0x202bef76	0x03852241	0xe84e02a1
+-	0xf1f9ac8d	0xcee61aef	0x61a4f235	0xd22991eb
+-	0x67a81345	0x375a15c6	0xe8fae8a3	0xb4ff2b37
+-	0x339ee4ea	0x14ffadc3	0xf49340dd	0xf285e568
+-	0x00fc6970	0x369c52d1	0x4f55368f	0x3f4d75f1
+-	0x6a73b603	0x963c1f59	0x171e2bdc	0x72bac76b
+-	0x9e2e5c32	0x307f7c3f	0xd3b48637	0x3a917acf
+-	0xea52a65f	0xecd209fb	0xf0ad84bf	0xd4bdea70
+-	0xa2647b38	0xce040b49	0xc6d5f13d	0x5d942c52
+-	0xf8edc042	0x798fdefd	0x4b074246	0x1cb1873a
+-	0x6793c186	0x23b9c774	0x77bb0202	0xc519b3aa
+-	0xa30c09a2	0xe1f6669a	0xb7eddb8d	0x7aaa91d6
+-	0x076a3789	0x0ac47791	0x1e503404	0x44fe8c54
+-	0xf3cbbf49	0xd3234eef	0x0d898b3f	0xe854984b
+-	0xe3986de9	0x923a5c76	0x2ee9abca	0x1a9fedbe
+-	0xdf76dcd1	0xea07936b	0xcdaaf247	0xe62d98fa
+-	0xa99c7f7b	0x34fc84d4	0x03a35111	0xad5675c8
+-	0xcc64075b	0x408203f9	0x846e1f08	0xe934019e
+-	0x423d1223	0x2f04f9e3	0xee1dbf40	0x65edc60f
+-	0x097aa22f	0x7058a2b7	0x41c8a0a5	0xa68aa391
+-	0x0f345c40	0x667517e6	0x860838ba	0x6dae933b
+-	0x764d5919	0x6673fa0f	0xf0a5e97d	0x4262ebbe
+-	0x64b413f2	0xd2c4145a	0x0b2c11f3	0xfdfe9f93
+-	0x96c77107	0x1399fdda	0xf599f215	0xb504da5d
+-	0xf8a95268	0x9ed1ef87	0x9ae33cfb	0x3b21f1ef
+-	0xc6d447c2	0xe0694d4e	0x967febab	0xc13f631d
+-	0x8393bfba	0x37438788	0x1724194d	0x8e77a045
+-	0x20e2483c	0xb961c2fc	0x485cf593	0xb3462621
+-	0xcb2959b8	0x10307e19	0xf71fbbfd	0xdda641e1
+-	0x0daf5f66	0x56d85178	0x145f6749	0xebc46ed1
+-	0x5593c249	0x94561f51	0x534cc654	0xca7c8814
+-	0xb59a578c	0x40b2b614	0xeaf3437a	0x198d5b4e
+-	0xf245fa53	0xfb75e0b0	0xa363c46d	0xc43b5468
+-	0xdf036413	0xc59f5a36	0xd8ff4381	0xa3af3e36
+-	0x7af63462	0x414526d7	0x7bdc41c5	0xa416f1e7
+-	0x6987d9ad	0x472c5499	0x4f10ee37	0x47bb7ff7
+-	0xc7f2e621	0x820008f7	0x33a475db	0x91ff5d72
+-	0x0517401c	0x73d067c8	0xe417b69d	0xb86d9903
+-	0x1ac9a032	0x74bbf582	0x8b65596e	0x883be34c
+-	0x95dcc26f	0xe232c646	0xfae9c19f	0x35cb5273
+-	0x6a94d095	0xfff6ca91	0xb9c40eb5	0xd351dcac
+-	0xc90d464f	0x9b609642	0x15663b56	0x15f7f88d
+-	0x22499f60	0x417fd6c5	0x2dc36fe2	0x712bf66a
+-	0x22f1fba8	0x531b8092	0x40d269b6	0x1d227898
+-	0xeb6ff35b	0x2490ac31	0xc958ed65	0x3ce6ffb7
+-	0x9338a806	0x3beadfe2	0x1c361ac9	0x53d0e3b0
+-	0x91d46102	0x4d57045f	0xb5c8afb3	0xfd2c9e7d
+-	0x3d578410	0x2adb9406	0x10df7459	0x90abccfb
+-	0xe3f217ed	0xef5f4e09	0x74925ce4	0x169b5879
+-	0xfeff4ad5	0xb300dd1d	0xc96022ba	0x72da501b
+-	0x1e694296	0x9efa33cb	0x0dc3ee6c	0x0ac4e7ea
+-	0x73041130	0xf0e6a295	0xc46bdb6a	0x6a927044
+-	0xd217ceca	0x0b744007	0xd5a2bafb	0x4220cd92
+-	0x70d3352a	0x5ee4f661	0xfa07e5c0	0x155542d9
+-	0x4a39fba0	0xcec0552d	0x30c1d8ef	0xbef9d21e
+-	0x183879aa	0x5b3f30a8	0x54a06db4	0xef876e4e
+-	0x5e823680	0x53e2a353	0xc9aa4112	0x13a56ee5
+-	0x848859fd	0x0ba2b801	0xec15260f	0x7bb22672
+-	0x1a097332	0xb141339f	0x752a67d9	0xdae373f3
+-	0x3c8cfd49	0x2dfaf2a9	0x95820c6c	0x956b39a2
+-	0x1ca0d24e	0x1312b978	0x7280e1bd	0xa7a7c2ff
+-	0x0b48e987	0xb6083e55	0x4b4b82f4	0x9c6104ad
+-	0xcb93beca	0xe1c34035	0x34de740d	0xbb151baa
+-	0x71f5942f	0x1eaac228	0x0c68331b	0x3d2a1dd0
+-	0xe7a3d41a	0x7253acae	0xfd4de230	0x79988d80
+-	0x4468f19b	0xac4440fd	0x6e8a6ef3	0x5736adf8
+-	0xded67716	0x1f1d5a4b	0x96c5f451	0x85bae181
+-	0x1293ab28	0xc2ba53c2	0x729ff4cf	0x60218df8
+-	0xc2870138	0x6127d844	0x89604e9e	0xd2b9ad4e
+-	0x4f6ded9f	0xdd263849	0x1633bd92	0x64b03a24
+-	0x96dabd4d	0x6e85d235	0x1ab69ad0	0x9aa80454
+-	0x6b9041e0	0x106c7e9a	0x8f54812f	0xa274efe4
+-	0xe45d6695	0xf3aa7bd3	0x6a5a2a63	0xe36f3525
+-	0x6238fa4b	0x7d6cb06f	0x16d3b4a2	0xf3b04822
+-	0x638f1a60	0x0e1875fa	0x1c0292b9	0x6b519ea4
+-	0x9faba37b	0x209341ec	0x83c9061f	0x3387dfe8
+-	0xc7f12ceb	0x2bef45d7	0x8f8acb47	0x35d9741b
+-	0x7009f514	0xfd003802	0x6f9489c5	0xe2ea2504
+-	0x910e996a	0xcc81d016	0x3280730d	0xdedfef59
+-	0x5a7357cc	0x8fe8dd39	0x15543fe5	0x976c4207
+-	0xe41cf62b	0x0ba6b4b5	0x5c3b7ced	0xa6c5b72b
+-	0x72ad3b4d	0xff143181	0x2b78a157	0x7fe231a5
+-	0x6ff0538a	0xe58ed1ac	0x81a311a5	0xefaa54b8
+-	0xf04a797e	0xce6e69c7	0xdc810726	0x7bab7be3
+-	0xdd5923e8	0x5a2413ed	0x31cef794	0x73dfd806
+-	0x1b9223c1	0x0c370882	0x04fa3b68	0x87c50bc1
+-	0x1d78c90f	0xf4e2cee6	0xebea941b	0x73e5838f
+-	0xca8d39a6	0xe004296b	0x28cf8a0e	0x7c73e7ef
+-	0x26a296c2	0x789d4c72	0xd1490265	0xd9a9e843
+-	0xf03504c3	0xfae6dffb	0x7a48f00d	0x51e369c8
+-	0xcb3eeee6	0x0625e936	0xe93d0d7d	0xfb15ba6b
+-	0xec5c76da	0x8fdf44f1	0xa036653a	0x5730c4a3
+-	0xe5bfe6dd	0x0b8c091f	0x3b51558c	0x403748f4
+-	0xf4007f86	0x952b5db6	0x5524d8ba	0x8046409a
+-	0xe3fc61a9	0x66f4ea56	0x5645150b	0xdb2bec15
+-	0x50672218	0x7f40e87d	0x2b8359f8	0x438787dc
+-	0x7f221597	0xf8b1590c	0x4f468251	0xff586d05
+-	0xb9195380	0x0ee09e0b	0x2fa7dbd9	0xd197b327
+-	0xa0dbad58	0xb485681f	0x5ef0937c	0x1e07ebb6
+-	0xcb49fe3f	0xc2427cd9	0x6c2c5298	0x4a2e171a
+-	0xa7f333a8	0xb3609ad6	0x94e374d6	0x0e1eb64d
+-	0x22c3367d	0xcdf89975	0x647aceef	0x16727c9c
+-	0xf476ae53	0x35a1212e	0x0db768b8	0xfff8b53d
+-	0xbd4fe45e	0xab28a5a3	0x59cec0af	0x28bcd1ef
+-	0x6f43ad69	0x2658a059	0x27aee0ec	0x4e8bbd15
+-	0xa9fdcf04	0xc9aa329f	0x687f010f	0x5c968a07
+-	0xb894e607	0x0e1cba22	0x2f00f203	0xe8e133ac
+-	0x494a4746	0xe8bdff9a	0xf69791a2	0x64179ce2
+-	0xbfd10dc6	0xc026f6d8	0x4871923a	0x8946b277
+-	0x609f49a4	0x6466df1b	0xd8c3c131	0x46ef0291
+-	0x0fdce8b6	0x2b9aedb7	0x225c4520	0x72b332cf
+-	0x4e220d47	0xf2f69c36	0x2c23fad9	0x57a2a918
+-	0xe017409c	0x490819af	0xf2121afd	0x951ff7ff
+-	0x40363fcf	0x5078b94e	0x9e4be775	0xee97ef16
+-	0xdb3a2390	0x17d42af9	0x96f56a51	0x1b4c2934
+-	0xc866315c	0x2b746f99	0x9a3b73f6	0xa1e081fc
+-	0xa9d07ebd	0xa6359fae	0xdf50d099	0x55304e01
+-	0xfe5aaa81	0x1e74267d	0x38b1d2d7	0x8633e9af
+-	0x99b013df	0x3aa05831	0x86279736	0xd2b464e0
+-	0xdf036a9f	0xe8162915	0x876c0d4f	0x4beb7d0e
+-	0xfec9b170	0x46bc9df4	0x46cb88fa	0x0cb5904d
+-	0x2e2961cf	0x7ea5dc1a	0x60670df2	0xf935ca32
+-	0x67e6777b	0x8bacc97a	0x5cd07248	0x32e483e6
+-	0xfdf09b0d	0xca57150b	0x3f432d09	0xdea2d7db
+-	0x9f6a2954	0x6f07dff3	0x4133f394	0x60272f97
+-	0x1b98c9ec	0x2ab648d9	0xb5df14a8	0x0d2c38f2
+-	0x5dfde2c4	0x7cb43ca3	0x8d0c6c01	0xe80ea41e
+-	0x5f58b71e	0x4ca9fef2	0xabd201a4	0x50905c08
+-	0xca8ba387	0x5592922b	0xfa4e05f5	0xceb64b14
+-	0x0845c5bd	0x518d369b	0x727e570c	0x1daaab31
+-	0x801e8b9c	0xec6568f3	0xd4c3760f	0x40a78d22
+-	0x38af58b5	0xc406a76e	0x8c3a7779	0x18272c42
+-	0x45cf7b70	0xa6f3c0f3	0x88021e41	0xda662504
+-	0xe97aa709	0xe93bafe0	0x8862ed5f	0x35bc8268
+-	0xf5a41551	0x3dd3bb21	0x1af0cf11	0x08fe1ad7
+-	0x53ecae41	0x01a4a8ae	0xfed636b7	0xf09323e6
+-	0x73b9b253	0x7ebd7ce2	0x7074b4de	0x21c719b2
+-	0x50982743	0xd23cfd27	0x136a1f4a	0x23260f6e
+-	0xfad89dcd	0x57586681	0xadc4fba5	0xad0f71b8
+-	0x91a3f188	0x20d62385	0xfecda9cb	0x33d67776
+-	0x2abb0e6c	0x0ad16087	0x486332da	0x2928d342
+-	0xf6d1b174	0x5e133a4e	0x72fc0ad4	0x940578b8
+-	0x320a42b1	0x9cbda7d4	0xf2a36135	0x00ab8de3
+-	0x5bad9000	0x5778e633	0x3952763d	0xe0e58583
+-	0xdfb0bf19	0xb11914b6	0xa67da7a1	0x8d9a9f81
+-	0x638cbcf7	0x83bf931d	0x8703b0dd	0xcab30fa4
+-	0xd6db2ee6	0x5cc2e5ac	0x717e636b	0xfdcbc760
+-	0x563b3b25	0x0e4df458	0x9efb8fa7	0x95aaa7a1
+-	0xf05b6680	0x5e237e59	0xc884018a	0x177b5a30
+-	0x3ea2c9bc	0xd0325ee6	0xb1dae51b	0x812ee29d
+-	0x6d58db21	0xb787fa68	0xfd092294	0x09683dd3
+-	0xfe0d6405	0xfdd99aad	0x78744a59	0x936738e6
+-	0x6ad6cba7	0x370f7f8f	0xd208c214	0x12239384
+-	0xbe71f0e7	0xfc0ef264	0xc04e4a49	0x354f9cf3
+-	0xf5d7572c	0x07839ad0	0x834a003d	0x23ba26e2
+-	0xf4049ecf	0x5ff402b2	0xff9d6769	0x074ebe6d
+-	0xdc829da1	0xc3d7697d	0x973efe4f	0xfc2a9165
+-	0x126dc518	0x0b824ca4	0xc438fb70	0xb7b0ee00
+-	0xbe56afd9	0xa3d8defd	0x971455ae	0xc11ffde7
+-	0x346e619a	0xb41111a9	0x6004b62e	0x896c668d
+-	0x738e458c	0x351f9fdd	0xe771b2ba	0xad6d7464
+-	0x719b57c2	0x6f6a4611	0x8a676f2d	0xb8db1c43
+-	0x3f102641	0x51bffdbc	0xb7862565	0x5d8dd231
+-	0x7a79bd39	0xfa472894	0x0fd1d2ff	0x64cf589a
+-	0x38234d7a	0x5c9acefd	0x8eb0b9f8	0x761e1c95
+-	0xf2fe78fa	0xe06220d7	0xaf82a919	0xf4e196e1
+-	0xa17c8935	0x06d08d16	0x6bad807b	0xf410805d
+-	0x4ff2bce6	0x3297c81f	0x06e35353	0xbe1f5e1c
+-	0x65d1cb92	0x0dc69b2f	0xac55d597	0x636ff24c
+-	0xe2e4f2ba	0x63d64922	0x4b2e9f71	0xad2279ec
+-	0x5f0b5c0e	0xac688638	0x35613358	0xf5531360
+-	0x54a304e8	0x27ebfe65	0x977b5a3c	0x3dc5e10c
+-	0x73b32ee9	0x3a2c9454	0x30a149c6	0x31e5b55c
+-	0x2c10854f	0x745cd38a	0x2853a27b	0x6629e355
+-	0x0bb67e39	0x5469184d	0x694a9bb6	0x0a0ca25f
+-	0xa878c5de	0xee15fd46	0x23d92ff8	0x02328404
+-	0x1c9402b5	0xa46b6ce0	0xefc3e947	0x0e9312ad
+-	0x5830ae9e	0xe30e32f2	0x9db8ee81	0xe8aeebbc
+-	0x30675c83	0x447278c2	0xab2bad3b	0x08ba3d0c
+-	0x1124e681	0x3691242d	0x903c8d2b	0x3281c312
+-	0x22af690f	0xd69a150c	0x57622c5b	0x29313c73
+-	0x6ab2d7c6	0x39b06dad	0x6e1f9f81	0x03324986
+-	0x53a49093	0x7654eba3	0x2527245a	0x9af596fb
+-	0x818ffb3a	0xa3817173	0x6a2c4b80	0xfcc42ad5
+-	0xfb1bbb69	0x3a3720a2	0x90a89bcf	0xed80308d
+-	0x7753cb1c	0x1c2654a5	0xb01ee4af	0x81091e85
+-	0x9067b3f1	0x2e2b9b5e	0x9fb0c7d1	0x78fd9f69
+-	0x5771c46d	0xacdf498d	0xfd8b8e77	0x4c15fa61
+-	0x607120ce	0x18a298d8	0x73716420	0x65e5e06a
+-	0x18c53e04	0x35b84427	0xcd82b522	0x9a7d26bb
+-	0xd56b4b74	0x49b47fe8	0x63178dc6	0x0bac0f46
+-	0xc8b0755a	0x9bbaaf1f	0x18131d2b	0xcc019330
+-	0x0ceb89bb	0x8808c2d6	0xfb5bd86c	0x6c945b71
+-	0xdc911924	0x4ebb8d35	0x44e46d08	0xabfee615
+-	0xf456931f	0x7a244955	0x0bffce7d	0x5533ca5f
+-	0xb1b2c636	0x4f29075e	0x64012561	0x7aa5e7c7
+-	0x9c8a0666	0x9698782d	0x3481ad8f	0x21a55b19
+-	0x735aa45d	0x4245b9c4	0x0d4c3fdc	0xd1b10966
+-	0x7035fcde	0xc2257947	0x4a37271a	0x9da464a9
+-	0x228adbf8	0xbf309e03	0x096f560a	0xa2b8ca78
+-	0x427702cd	0x35a99cf5	0x99811758	0x6953db58
+-	0xec07533e	0xe95838b9	0x61c71654	0xc9cce595
+-	0x275af106	0xc8697af3	0xb3f27e58	0x411d8d30
+-	0xd0d90ecd	0x1503b9dc	0x76bf070e	0x49f89ef0
+-	0x7333b083	0x53f9c44b	0x8330c3a2	0x6a1119c3
+-	0xca555f2b	0x3d51fc6f	0xac7b3320	0xf8e42cdf
+-	0x053753fe	0xc122336f	0x94d289c6	0x088b5a64
+-	0xc3aac7f0	0x96a76344	0x2ff05828	0x9b4f2af3
+-	0x46de6a46	0x4ed29d98	0xe2ab7634	0x27481ddc
+-	0x300ca71f	0xce7ac539	0x88240e09	0xb1a14e78
+-	0x2addd4c5	0xb3a7f320	0xe91f549b	0x6881c45b
+-	0x0e381c47	0x1018feb4	0x64679650	0xe62281cc
+-	0x670ee6d4	0x0d226160	0x947b7f08	0xbc595a74
+-	0x2380c0b3	0xc0235785	0x63b41221	0x80b9cc31
+-	0x3231b4ae	0x33ed5718	0xf2c5c90f	0xdd3b03ea
+-	0x67dfca08	0x453e9d29	0xa2bdecbf	0x5e9a3181
+-	0xad17aea2	0xff0a8f13	0xdf946849	0xcfbbecb7
+-	0xb0a602d7	0xb1a820c6	0xfe7abbc8	0x7f70790d
+-	0xeb5f8863	0x266d3cc1	0xbd552a44	0xe19b1b3d
+-	0x856aefbd	0x51c11f1e	0xde661b7f	0x61c075d2
+-	0xd0f6a834	0xff1d0d37	0x6793d1c2	0x70c133a5
+-	0x20c4d2cf	0x8c80d4d3	0x61ebe382	0x788b74df
+-	0x11c56903	0x535889ba	0x0a9c7380	0xf9de2837
+-	0x09437fe7	0x1627c6b2	0xb943bdb8	0x69bc29b2
+-	0xee9795a4	0x83c992e0	0x95437918	0x8ce166a2
+-	0x56b56b66	0xb0680941	0x623d38a9	0x2add07ad
+-	0xe583ba09	0x96f6532a	0x3eff4696	0x2a8a6b0b
+-	0x905b913b	0xafc01673	0xe871e006	0x2c2339ad
+-	0x248438e5	0x96d83e53	0xb3a75d6b	0x2258cf63
+-	0x69ff39bf	0x95727173	0xc3ac09d5	0xea8d2c06
+-	0x0e7c0a4b	0x144fcade	0x28a9a5a3	0x97c11ae8
+-	0x89865e3d	0x1640cd32	0xe3e551f8	0x1f7ba770
+-	0x6d23fb31	0x11eceae3	0xc8ccb8ee	0x46dd0bb0
+-	0xd01a46ff	0x0504adf5	0xec6e170e	0x2e3d7ac5
+-	0x70f893ac	0xaf9963db	0x061e283c	0xf0ad248f
+-	0x2fe97e19	0x881fd340	0xc686c9d5	0x88ea8ba5
+-	0x92f05cd7	0xd6716148	0x6fc47fc3	0x2c51d9b9
+-	0xd50a7faf	0x4eccacd1	0x7c92f802	0xa63ffc83
+-	0x7cb0ab1d	0x4492e81b	0x7d906554	0x43306ba1
+-	0x73a5d57a	0xe57a05d6	0x6850b964	0xefed595c
+-	0x7754978f	0x629e8236	0x62ec4dde	0x247439ee
+-	0x8b9982fa	0x4eece5c2	0x48599175	0x0fdc752c
+-	0xecd87b12	0x94936c75	0x17a45ea1	0x80a899ac
+-	0x22a39ee7	0x745730b6	0x03ea4daf	0x4a7570d7
+-	0x307621fa	0x7322e0a7	0x3a8e0316	0x454e46f7
+-	0x08773750	0x156dcaad	0x5562bc06	0xa23a1ee3
+-	0x20435211	0x1d679ea0	0xb220e205	0x682cc1a6
+-	0xd64a71c7	0x3ca7f8e3	0x2e92f253	0xa7cfdd0b
+-	0xd62b4053	0xf5c5f641	0xbf72dde1	0xdcb716c1
+-	0xe2f7b05d	0xa03145ea	0xc09828d2	0x7dae7916
+-	0x6fb97c79	0xb3a85204	0x998a9c7b	0x5f42ba8c
+-	0xd9c628b3	0x6b17bacb	0xa889b716	0x450ff97d
+-	0xe9166f3c	0x2d20777b	0x82a003ae	0x2c7ae0aa
+-	0x6011a9fe	0xfeed34be	0x1328f67e	0xf61003a3
+-	0xfaecdf20	0xee18c81e	0x731a0302	0x11a39e60
+-	0x355d78dc	0x99088f2c	0xcf253759	0x97347603
+-	0x736f71f1	0x37e4b395	0x9cc74540	0xf7e39994
+-	0xf01c5f64	0xbec519f1	0xa79c1067	0x76000d5e
+-	0x1ac85b6e	0x51e5b7a3	0x62a97ddf	0x6f20096a
+-	0x2af51e77	0xea5554f6	0xb4e581da	0xc1ac4ba8
+-	0xc8f22bf7	0x9e254d3b	0xd7dd62f6	0x6461ae3e
+-	0x423e1f10	0xf143e7b9	0x18c73b04	0xa43de614
+-	0x2da8d02f	0x9befa706	0xc01dcd49	0xa278f1e0
+-	0xd85f3177	0x6b6679fd	0x1ccef04e	0x53af9252
+-	0x34d751db	0xc8d32c86	0x3d725097	0xa64ed581
+-	0xd090c42f	0x9e92bf3f	0x6f82b089	0xd42728eb
+-	0x3dd651e0	0x1985bc52	0x4b0f4159	0x0f99bd7f
+-	0xe2597023	0xca0cae4c	0xce48a894	0x7249dd88
+-	0x8e146632	0xb4be1d6c	0x790ae7e5	0x6747b657
+-	0x52143947	0xa2e42ed3	0xea359617	0x6ca01a11
+-	0x35c5e2dc	0xc97b78fc	0x5db6db2a	0x80fe3414
+-	0x27da19d4	0xd7431d04	0xa91e9110	0x7d8ecb23
+-	0x2508700a	0xc8c71ed9	0xd28835af	0x018c2887
+-	0x3d0a6fab	0x3e8523d6	0xd0688dee	0xe5c3865c
+-	0x838d72e4	0x6bb73a1d	0x497a59ca	0xf77c56de
+-	0x38ecb72e	0xa55e3565	0x04b12c92	0x1aec9997
+-	0x037c340a	0xef0d04c3	0x78f74bd6	0xdec9b9e8
+-	0xd95b61ea	0x5528e8f5	0x4ecd325c	0x88ffdc0b
+-	0xb337ac61	0x899d90e7	0xb5eeb978	0x8295d9ae
+-	0x1ed8978b	0xa8849eda	0x8633b4a3	0xb8c858b5
+-	0xbe3c4375	0x28b9e84e	0xb2a26def	0x22f8f66b
+-	0x3a4aed99	0x0c4914ea	0xad103249	0xba5a5eff
+-	0x8a052461	0x26938899	0x915c6ed7	0xe6268ad9
+-	0x246e8c74	0x75f3c196	0xc3e725d6	0x92e02549
+-	0x1f78a5cb	0xeada57e5	0x40f14906	0x0215e49c
+-	0x57c06bae	0xc1896b87	0x0cd40a63	0x60741d80
+-	0x11a69899	0x80fed942	0x0497e115	0x56697b55
+-	0xba89c3d4	0x27d6b7c5	0xddff87b0	0xd3b1ff2f
+-	0x3160e528	0x9cca1286	0x13b4fdf1	0x38cdd907
+-	0xb50c4597	0x4c151714	0x1cab86c7	0x23126a3e
+-	0xe26e9749	0x289a0d0e	0xc4004640	0x9d33928d
+-	0x33b691a2	0x15ed6e6b	0x6e773980	0xadd59678
+-	0x188ba49f	0x08da4c6d	0x6d150d0b	0x0c6c7b98
+-	0xc8e1df7e	0xb8b1e692	0x5e89fd35	0xcb253d24
+-	0xfc6ee27c	0x8013de3d	0x1d38012b	0xe50a8f7b
+-	0x7d410ff1	0xceee4e9f	0x0e8094b6	0xaa1a5f57
+-	0xb395a551	0xbd62b2ae	0x5d7b34c8	0xbd2d6195
+-	0x33af4109	0x0769ff18	0x9c6cc123	0x78ee6eb6
+-	0x412644e7	0x70e0c6f4	0xf45d8fc6	0x0435f5af
+-	0xd43622b7	0x27409d5b	0x6dd04e8f	0x9f02ecf5
+-	0xca415f7d	0xc9f439c2	0x7198e539	0x20476b75
+-	0x3cdd8dd8	0xce17fbb0	0xa5bc115e	0xb0ee52c1
+-	0x0b074cfa	0xd26d4f99	0x3b43320b	0x230b680b
+-	0x9908f2d2	0xcbcb1952	0xf45a2f53	0x7b4564c6
+-	0xcf2fd983	0x414fe4b2	0x55ea7f11	0x63e8117d
+-	0xe8954052	0x7c2ea344	0x97a02aaf	0x6ca874c3
+-	0x1ae5b4ee	0x41754eae	0x6954abe0	0x115ddcda
+-	0x9a27968b	0x32a53e65	0xffe47b2f	0x4fe7e5a7
+-	0x6016dedc	0xb3c0893e	0x9626776d	0x5ec773f9
+-	0x1104e01c	0x1473cfb3	0x43b2cedf	0x8ca9d119
+-	0x7f1bc844	0xd8bb7387	0xba90d2ef	0x2bb0dcf4
+-	0x2340f124	0xa5bd514c	0x50afab05	0x718f5ad5
+-	0x7c03fad9	0x71d00d2d	0x1c31fdc2	0x4a938809
+-	0x40945ded	0x437f2a0d	0x83c10d64	0xd224c6ab
+-	0x0cd44481	0xb0040966	0x27fd6e7f	0x6ff45d4c
+-	0xab057ad1	0x8fa4e5d4	0xac50270c	0x6e4926ca
+-	0xc5721498	0x2529b458	0x40ee2ad5	0xde5e21f2
+-	0xea8964ca	0x56766e60	0xdc3b8702	0xa93528d4
+-	0x28d7713d	0x42edf022	0x59774dd8	0x200ff942
+-	0xe7a4d769	0xd8c4ef5e	0xe177f715	0xe9d53cd6
+-	0xc11270bb	0xb25977e5	0xb80867b4	0xfb48468b
+-	0xdbf166a8	0x49700d85	0x0f85f98a	0xa7ca7a75
+-	0x109817ce	0xca243f19	0x8bed7688	0x9a1c8231
+-	0x94f0ce97	0xc36309ca	0x90ecac24	0x67e7e0de
+-	0x86b18d62	0x18c7b7a5	0x622f5d3a	0x47e1e067
+-	0xdc96b94d	0xe4a03beb	0x59d17692	0x040abc0d
+-	0x44a5ae50	0x3d3dab7d	0xc18dfd30	0x2802b9d9
+-	0x6818379f	0x56db41d7	0x97cbf039	0xe41d6a32
+-	0x64b5fb01	0x6506e0b4	0xd60a3234	0xdf3573d2
+-	0xac148579	0xe7f46ac0	0x05e1c763	0x904a5aa9
+-	0xc7ca1ee0	0xe0c3b047	0x5e36e1bc	0x447a9141
+-	0xe24654df	0x9853a49b	0x6a29cedb	0x022f00dc
+-	0x6df2a7a7	0x3636da02	0x72bb9c81	0x4f0e0918
+-	0xd649f4a5	0xbb0c81f9	0xc0ba93fd	0xc1b390f1
+-	0xda84e720	0x1aea0064	0xf3ee67e1	0xb874ef4a
+-	0x82467ce6	0x59abf506	0xafbf145a	0x9a4cf8a1
+-	0x17247c89	0xd8669398	0x1796eaf7	0xbc2d24a9
+-	0xcb486570	0x17a9db23	0x3e6504f0	0x08684517
+-	0x2723ab28	0x7081b814	0x8a265a04	0x697e6d8b
+-	0x69b146dc	0x6434c182	0x27ec8101	0x864405c5
+-	0xfff86c9e	0x3052d8a6	0x23d283db	0x492970e8
+-	0xbc6c64c3	0x46d8f98b	0xe16e7ff3	0x731e4f82
+-	0xbd26b1af	0x6b30e6c1	0xff192fce	0x097e0bba
+-	0x49df63a5	0x2fdc3f01	0x50aae053	0x60177b8f
+-	0x1949eb85	0xa46084ce	0x9658f694	0xcb951fbc
+-	0xc53806d9	0x63a17d30	0x3b3f86c2	0x8a37aa6c
+-	0xedf8fe5c	0x87aee1d3	0x8c680126	0xfd8b27a6
+-	0x231fa106	0x69358c25	0x4502c348	0xc107861c
+-	0x46280e70	0xcf6067ac	0xf6a04ff3	0x3e488677
+-	0x6f3fb4c1	0xeec1f758	0x560e1c48	0xb604c06b
+-	0x69e34b1e	0x8ef41dec	0x854cea22	0x726581d7
+-	0x55ea91f3	0x38ae4053	0x5ff7389d	0x6952cbf6
+-	0x09aa0fc1	0xcccb1d50	0x5c1a633a	0xde1eba46
+-	0x797212d8	0xa943fb3d	0x6063a1a8	0xbe68ef36
+-	0x6ba0d5ba	0x0dbe2061	0x47711712	0x62679807
+-	0x6f34009e	0xe6fe8f18	0x66a6a64b	0x3f80f472
+-	0xe953d5e0	0xbcd8196a	0x086faad0	0x49da7f16
+-	0x7f2199a5	0x55af4af2	0x085b4d38	0x22e634bd
+-	0x6cff0416	0x343466f4	0xd121a7a6	0x6caa3942
+-	0xe4f365a2	0xd832eb0c	0x616728e5	0xcca4c71a
+-	0x4010cdc2	0xd0f1d1cb	0x5e695f89	0x27719206
+-	0x0ec92854	0x76144a1b	0x49808021	0x12457a1b
+-	0xdde7aa5c	0x8f1a077f	0x110a4a5a	0xb3a5ad31
+-	0xaacebf8f	0x66ff7f33	0xa2340971	0xfb4c7e82
+-	0x8dd536d7	0xafd2021a	0x72aa9c6e	0x22df6952
+-	0x83c4b4fb	0xba515555	0x93eee8f0	0x22d0ed5a
+-	0xbec05586	0x83828f28	0xe0d7f930	0xac0f0199
+-	0xef6d76f9	0xf56ebdf8	0xf67323c9	0x8b805745
+-	0xce5902c0	0xfa2ce3da	0x10f836dd	0xe1ac6d97
+-	0xa0e415ea	0xbb7c32ad	0xc421f3b0	0x8166e898
+-	0x74e7a73c	0xf454b82a	0x631369b1	0xe30ed23f
+-	0xdaa1c75b	0xe7c9c6a7	0x5f33c375	0x99c05187
+-	0xf2d6e6ae	0xcd2045b8	0x92ff3009	0x15082015
+-	0xd1a1580e	0xdce25f9b	0x21984a75	0xa9be5388
+-	0x099a5372	0x3ab9bcfa	0xdb9069aa	0x49a99be6
+-	0x42a9ee0b	0xfe32d832	0x24e11ad3	0xd16f596b
+-	0xb95982cc	0x754ab1c8	0x42ffa128	0x539e823d
+-	0x28e0f976	0x262ddfc0	0x2a16e7ad	0x49b5acd9
+-	0x931f3def	0xdc419b84	0x8412cc3c	0x81056cd9
+-	0x91933e1f	0x57710b15	0xa55d2696	0x87d88724
+-	0xd4fedfdc	0xcc3825c6	0x397f382f	0x80f9b6ba
+-	0xcdd6d59f	0x24b984d8	0x8f1c5bcf	0x25bcef1d
+-	0x00dc603a	0x76fd94c2	0xa267a7dc	0xa6e90a6a
+-	0x5c5916d6	0x065a52cf	0xa28d3263	0x9b17b72d
+-	0xb8436b48	0x1b1c2391	0x1fda3395	0xa6cecbcb
+-	0xbc4ec502	0x1766b590	0x5945fbd6	0x6a124405
+-	0xf92d06f2	0xe24694b7	0xf6befd08	0x8266cf5c
+-	0x03ed670a	0x5f98be62	0xf27b7e2e	0x598cf22c
+-	0x2e855591	0x879815fb	0x153799c6	0x3820faf6
+-	0x3d3a2cc6	0xdbb6dece	0x1a3c46b2	0x5031bdda
+-	0x47894c03	0xe43661fe	0x7a6ee548	0xa5ca9779
+-	0x6aa9e105	0xbc8505a3	0xa03b860a	0x448faeb9
+-	0x367de4a9	0xc9779c7d	0x6535ad8c	0x4b7fcacc
+-	0xb2db5c10	0x0ab41ec6	0xe528ab90	0x5e6f03da
+-	0x98bc76d3	0xf38df42e	0xea59b039	0x1c2eaa28
+-	0xca30dac5	0xdb0eb8c6	0x60063860	0x18823f8d
+-	0x164e2f28	0x7cbbe080	0x70a12315	0xb08f44d9
+-	0x5fbb9453	0x4bc62738	0x9fa15ffc	0xe4033ca1
+-	0xc9dfbc13	0x58245d7d	0x588113aa	0x8f5a6ac8
+-	0x92588a60	0x26330c74	0xb2aaf0e3	0x24ada1ea
+-	0xa9e973ae	0x624b73e7	0x4ef961db	0x95ede155
+-	0xf2bb86ff	0x96bc79d9	0x95cd646b	0x1c3af453
+-	0xf60fa711	0x10905115	0x0e24b740	0x169bb227
+-	0x34cee6f0	0x990980db	0x18d8ace5	0xd4c87504
+-	0x29515d32	0x2e5d9c04	0x87dffa60	0x12e815d1
+-	0x021db8e9	0x2c5a42fd	0x6e3a1a13	0x88889ab5
+-	0x3bc915a6	0x608919c5	0xd310a970	0xea8f3218
+-	0x949f55bc	0x9ed7aadd	0x6d990157	0x181f1c2f
+-	0xa940df64	0xf3be8c39	0x7ca2e699	0x7b4f07f9
+-	0x89e83fee	0xe66b9493	0x54fc3d17	0xa63d2d46
+-	0xd5e835d5	0x910e0144	0xecf67025	0x1fa6a93a
+-	0xe692dbca	0x466af681	0xc2bc808c	0xbb4ebd60
+-	0x74d5c729	0xa283ad25	0x1e66fa23	0x6d372988
+-	0x753c9fcb	0x1742efdb	0x5b68cf15	0x372a0e33
+-	0xaa3a7ebd	0xa0e944d5	0x95d5cbb4	0x4fb6020b
+-	0xced927b0	0xb2afea78	0xd0646b72	0x1622fad4
+-	0x4672c6b6	0x736ae4f8	0x8d46a4db	0x0e6a432e
+-	0xe0a30a98	0x4c2bcf4f	0xd87acedd	0x19682d7a
+-	0xf97c025c	0x55d8feb3	0xbcd4d2ff	0x236c6f9f
+-	0x8ba0246d	0x42812f73	0x327636f5	0xc92cd30a
+-	0x08a69d9d	0xc735a946	0x82eca01f	0xda0753a0
+-	0x7077b1d1	0x17b05834	0xfa24bc02	0xf49f4473
+-	0x8f9ac6b4	0xa880c630	0xf7457b4d	0xd5f829e4
+-	0x25c49a99	0x1176a997	0xbb2d2009	0x61d35764
+-	0xa322c752	0x6ef3ae02	0x5faae6f8	0x9a52acf1
+-	0x19176f43	0x43843b07	0x14efc471	0xee474403
+-	0x319c4857	0xa19adcf0	0xc0a466e1	0x02db14ad
+-	0xb7f211f3	0x72aa6ca6	0x0eb9bffe	0x48a6d284
+-	0x9a93a2ee	0xac09fc5f	0x92a62c4f	0xd34f0271
+-	0xffb348c7	0xf229b6e2	0xc68ec1ca	0x19577dbc
+-	0x069a10bf	0xf64ac347	0xf7c3c848	0x81975294
+-	0x6376e550	0x93b53440	0x8bb17daa	0xc4c64c07
+-	0xcaeff293	0xd51497b0	0x33da3565	0xa73d5def
+-	0x4bf4dcde	0xfb470fcd	0xca7db864	0x7ef17022
+-	0x47567363	0xd8fb8d74	0xa68c3c72	0x8202e4f3
+-	0x75bf1798	0x16a70fd2	0xcc3b697f	0xab9a1075
+-	0x13f56ef3	0x269d0302	0xcb655a43	0xc9a4de88
+-	0xfb8363de	0xff40f36d	0xd2555489	0x647a7995
+-	0xfd8eda6e	0xa3958c9a	0x20e029b4	0xbed3e225
+-	0xa7df5f17	0x63bc3c1a	0x337ecc9d	0x6c329508
+-	0x786aa47e	0x1db5b093	0xc0acd73b	0xf9587237
+-	0x243e5d40	0xd3623c3a	0x338c4740	0xb672140e
+-	0x43640a9b	0xb7ef3f6a	0x44151074	0x749bcc46
+-	0xfa1f103b	0x0fefb19e	0x58855538	0x138ad276
+-	0x2641fd80	0x297d99d0	0xfaa63ba2	0x00b6f11a
+-	0x3793fb6b	0x124763a1	0x8b9419ac	0x56abf9eb
+-	0xdbf83419	0x43570571	0x37299cd8	0x8b201e62
+-	0xa4058fa5	0xb320e91b	0xbe7d40b7	0x4eca3b2d
+-	0x8519c155	0xf4b17021	0x9e4c572a	0xdc1f9e16
+-	0x39a589a3	0xa6cfc7a8	0x5b986910	0x64e150e7
+-	0x60b6f2c1	0x02bacd3f	0x2f3b5a5c	0xc6f453a8
+-	0x15a87a7e	0x76104a14	0xafa2ef63	0x2cd48dbe
+-	0x3c7abddc	0xd786ea5a	0x4f65867a	0x355cda38
+-	0x2ae03d9e	0x4f11f6be	0xfc0a0034	0xde4ea602
+-	0x21ff83ea	0x0f12d913	0xedf4da28	0xc96d8fd1
+-	0xd7e82c3c	0xfec63bdc	0x37a456d7	0x3007e18c
+-	0x091a47b6	0x82f1c641	0x82219cce	0x3e7e6993
+-	0x7b3a2115	0x0b8e1a02	0x40f88213	0xfa2f9c21
+-	>;
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/m12306a9_00000017.dtsi u-boot/arch/x86/dts/m12306a9_00000017.dtsi
+--- u-boot-2015.01-rc3/arch/x86/dts/m12306a9_00000017.dtsi	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/dts/m12306a9_00000017.dtsi	1970-01-01 01:00:00.000000000 +0100
+@@ -1,750 +0,0 @@
+-/*
+- * Copyright (c) <1995-2013>, Intel Corporation.
+- * All rights reserved.
+- *
+- * Redistribution. Redistribution and use in binary form, without modification, are
+- * permitted provided that the following conditions are met:
+- *	.Redistributions must reproduce the above copyright notice and the following
+- * disclaimer in the documentation and/or other materials provided with the
+- * distribution.
+- * Neither the name of Intel Corporation nor the names of its suppliers may be used
+- * to endorse or promote products derived from this software without specific prior
+- * written permission.
+- *	.No reverse engineering, decompilation, or disassembly of this software is
+- * permitted.
+- *	."Binary form" includes any format commonly used for electronic conveyance
+- * which is a reversible, bit-exact translation of binary representation to ASCII or
+- * ISO text, for example, "uuencode."
+- *
+- * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
+- * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
+- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+- * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+- *
+- *---
+- * This is a device tree fragment. Use #include to add these properties to a
+- * node.
+- */
+-
+-compatible = "intel,microcode";
+-intel,header-version = <1>;
+-intel,update-revision = <0x17>;
+-intel,date-code = <0x01092013>;
+-intel,processor-signature = <0x000306a9>;
+-intel,checksum = <0x3546450b>;
+-intel,loader-revision = <1>;
+-intel,processor-flags = <0x12>;
+-
+-/* The 48-byte public header is omitted. */
+-data = <
+-	0x00000000	0x000000a1	0x00020001	0x00000017
+-	0x00000000	0x00000000	0x20130107	0x00000a61
+-	0x00000001	0x000306a9	0x00000000	0x00000000
+-	0x00000000	0x00000000	0x00000000	0x00000000
+-	0x00000000	0x00000000	0x00000000	0x00000000
+-	0x00000000	0x00000000	0x00000000	0x00000000
+-	0x86c5b0d4	0xf6978804	0x7f4f5870	0x6319dc3c
+-	0xbb3b7d61	0x33cf9075	0xe8424658	0xf611a357
+-	0x5a3401db	0x42caecce	0xb4d8e75e	0xe6dbaf24
+-	0x7861b35f	0x6bd717bc	0x23b9b731	0x82ec1ac8
+-	0x20337b64	0x5396dbf1	0x59973bff	0x724bc7e9
+-	0x5237193b	0x0b8647c1	0x6a0d0e16	0xbf9ddb5b
+-	0xace2cc1c	0xad707638	0x056f102f	0xa37e60f8
+-	0x76255642	0xfb86e030	0xb8069a40	0x367795f1
+-	0x653fb05e	0xab7f14ad	0xb6e8a8e1	0xd2598d20
+-	0x2eba3f68	0x78b372f1	0xba8d13f8	0x1f1de861
+-	0x97f951d5	0x8097c728	0x27dbf904	0xb97906a8
+-	0xffe7a4ac	0x4b947668	0xc1dbd726	0x2adcf777
+-	0x63b1bcf0	0x818e2a1b	0x49aa907b	0x2faf5e8d
+-	0xae842352	0x82707fae	0x0aa12b41	0xa0bae11c
+-	0xb4298c47	0xd2b4099c	0x4ff625f2	0xcd2630d4
+-	0x79850981	0x05dbf57d	0xb05b81a5	0x56e73ec7
+-	0x95cb3897	0xe262bda5	0xb2c6e288	0xcb7f8e77
+-	0x72b8bdd3	0x3f400494	0x63ade65b	0xbc4adc71
+-	0x00000011	0x06c0f8ff	0x0eb63d77	0xc54cdabf
+-	0x76bc8860	0xdd142643	0xe7bfc220	0x17aa0a91
+-	0x4fd676ba	0x4b6b1a15	0x2a1a1c16	0x4fed6de0
+-	0x8c3d6bcf	0xbb319bf6	0xa82532f1	0x7c8ce014
+-	0xb830a38b	0xec25bc6b	0x61c8a8a9	0x49a21dba
+-	0xfcf8bad0	0x7372f29c	0x1f7fbcdd	0xc2ff42f4
+-	0x780878f0	0xc967068e	0xe19cc3c9	0x155e6646
+-	0x75235c43	0x9aaf3741	0x9dfd116d	0x0f031b6a
+-	0x4963e039	0x6918daa8	0x7f0ca4ab	0xd77dad79
+-	0x2f8847e8	0xf79c82a4	0x6a6aaad4	0x24f07dbc
+-	0x895d3f6a	0xc96b2eb0	0xff50228f	0x573d364a
+-	0x5fca9d56	0x3c11c35b	0x3e90fb12	0xc4604067
+-	0x5c980234	0x7c42e0c7	0x60cca3de	0x637a4644
+-	0xedc43956	0xb0efb4e1	0xe94716fa	0xa6478f51
+-	0x33965654	0xdf6b40a3	0x48ac1b18	0xd6723c94
+-	0xf040d6d1	0xaf850470	0xe2bcde48	0xb90a4998
+-	0x8f620105	0x3d592878	0x2f697bad	0x9f7721d9
+-	0xec34444a	0xb0594770	0xd7180f9f	0xa510a168
+-	0x460563b0	0x5d4f34f4	0x21dfc16b	0x051de344
+-	0xa57bc344	0xff2c7863	0xf0bc063d	0xf5a89004
+-	0x79a81dab	0x9e8cb974	0x2309b0a4	0xa47a46de
+-	0xcf9c0c44	0xf761c817	0x67ab642c	0x0db4422f
+-	0xca3616fc	0x79e66c8a	0xd56a3332	0x5e0f338b
+-	0x5814cb3a	0xed1b9a4d	0x47d59f72	0x25b03786
+-	0x3edd1d42	0x8cd947cd	0x706e6ebd	0x82c2bada
+-	0x1bf6a96b	0x77dd859a	0xda35335f	0x22fab458
+-	0xd0661fd8	0x02bb4a42	0xe2a2bcdb	0x0616580e
+-	0xd35be23f	0xc206d16c	0x401218be	0x51107c3d
+-	0xba84b8be	0xace4d8f2	0x505b9b28	0xc517034b
+-	0xac5ba582	0x7419fe54	0x43493cb1	0x2fe0a66e
+-	0x206039b5	0x07569011	0x230ce53d	0x168d427f
+-	0xbfe0bd10	0x82bf11be	0x5b55475b	0x5490a0e9
+-	0x1c3c1e3c	0xacad77de	0x1666512f	0xfc3250d8
+-	0x930a6312	0xdd85c066	0x1b95c18f	0xc8bbd3b0
+-	0x1bb2a34e	0x642c7653	0x0f536213	0x1f7ab4eb
+-	0xaa5ef677	0xe6ac9581	0xd7a2fe73	0xd417dc79
+-	0x455a6877	0xae825a40	0xe0c98bec	0xac39ba49
+-	0x299d9bd9	0x957d0bb0	0x1645111b	0xe9da4beb
+-	0x1b005ce7	0xddb742ce	0x6c5f3ffc	0x24f74d2c
+-	0xf4ace044	0xb21bc7ba	0x338002dc	0x240effa1
+-	0xd208ae00	0xfe8c2b5c	0x9a457293	0xd9365ac4
+-	0x98f24244	0xf6d1aaea	0x7b874350	0x1ba4086b
+-	0x1d3bf168	0x2bb6f4fa	0xb27f8477	0x8da836f6
+-	0xa8762693	0xc377fa64	0x74cfd979	0x90435c25
+-	0x29d80e17	0xc3503c9c	0xaacd2178	0x232c748d
+-	0x6fecd3ba	0x00fb4aa0	0xbac3ee19	0x6e5c63e3
+-	0x17823c14	0x0e9d33bc	0x0fa9de06	0x998b14b2
+-	0xfdd8c80d	0x01b0591b	0xf70bc4ce	0xb278c496
+-	0xa7e30708	0x69cf8420	0x14f8b744	0x8bb8a0ff
+-	0x168f6db0	0x95da6db2	0xf96d121d	0x67fd06f7
+-	0xcd81d278	0x8693d095	0x15e1a24c	0xe5f554f2
+-	0x499874e8	0x30fc0785	0x0f4fa1b9	0x65c93dad
+-	0xd939bf24	0xdad29721	0xf253b752	0xf6ff59da
+-	0xc5dfaffc	0xf0071f34	0xdb0db8b0	0x24475e2d
+-	0x2a4d5b8a	0xf7624bea	0x3fdcbc90	0xb5a66e35
+-	0xd0f08636	0x24643caa	0xc5d08e83	0xb134c55c
+-	0x8e3653c7	0x34496b0c	0x6b2aeebc	0x2fbab601
+-	0x105613a2	0x7babd55d	0xa01af846	0x248be690
+-	0xed27917c	0x26ee6e13	0xa1dac5fe	0x852ed91a
+-	0xfc83fcca	0xdf479c33	0xfd6efe96	0xdc62521b
+-	0xa37d2a8c	0x1d2bad9e	0x4287614f	0xc4f7b62c
+-	0x2aab0562	0xec6d4226	0x52853fb4	0x264e3507
+-	0x1c3af366	0x33269776	0x81b8529d	0x115530dc
+-	0xe035f98f	0x433d1b6c	0x1ea6daea	0xecfd2ad2
+-	0xa57a0c22	0x1dbe3e12	0x6fafe41b	0x8e579e35
+-	0x6c493fbb	0x034dd4f9	0xd17cd6f2	0x05c5cfa8
+-	0xd9bffa39	0x0fc16e9c	0x831b88c8	0x7e7dce3e
+-	0x3320bc7f	0xd5abafaa	0x217ab526	0xade2597d
+-	0xf01b00f2	0xc9e34b72	0x00a4cb0b	0xdc198512
+-	0xdc7cc8a1	0x89db07b5	0x6c2153ea	0xb8bdb8aa
+-	0xdf8a1ae8	0xa517f6b1	0xd32569d9	0x37e79008
+-	0x3c7527c3	0x7d5b2d3b	0xb31cb907	0x35db7f6c
+-	0x0ab0cd65	0x75feaded	0x7c8260a9	0x5bc04f56
+-	0x2fac9f60	0xd7b3a2c0	0x2b393634	0xc2df7f43
+-	0x1ff2fa9f	0xc81af169	0x188b1f4e	0x08bf6f86
+-	0x5ab2f188	0x0a71eb64	0x03b57501	0xa684fc23
+-	0xa729ffef	0xe3b4a709	0xf9eb97d2	0x01506c95
+-	0x0d9285f5	0x8e1ee93c	0x7d15a0d8	0xd9390673
+-	0xf116ebd8	0x7e68798b	0x3dc8412e	0x5a9a04b4
+-	0xe3805f51	0x00493bb1	0x4ec65ca2	0x2aedd69a
+-	0x7f2a5b18	0x9994ac32	0x476f3703	0x7d3da882
+-	0x5635f55f	0x7a0887e0	0x0af46feb	0xfc2f3591
+-	0x02e29400	0x70fd3234	0xc549379e	0xaf34fa5a
+-	0x5bf7c649	0xeb183cff	0xa236d508	0x4525ab64
+-	0xc4301026	0xf281df99	0x0b298e46	0x9b7c1a99
+-	0xc4b24e77	0xea536992	0x5a39e37c	0x570fb6df
+-	0xae5d5c49	0x01142cc2	0xda05d3f1	0x337bf65c
+-	0x3c986598	0xbecefd30	0xb5e34c2a	0xe7c3847f
+-	0x18cb24b4	0x71278c26	0x4b8d6caa	0xaf7c300e
+-	0xfb6ce9b8	0x94c4b785	0x67275f17	0x59498cf5
+-	0xca8eeec6	0x3374e7a6	0x649affac	0x9049ba78
+-	0xff9d3908	0xaceec446	0x225ece3a	0xac1d4fec
+-	0xdc050fed	0x04e3ed8a	0xb303d8e9	0xe9d26aff
+-	0x0a98691d	0xf243492d	0xe3b42f00	0x6c21a97b
+-	0xa385ae98	0x14ba3f4d	0xc0215cc1	0xe1ba6c0d
+-	0x412bbbe4	0x39f95d1c	0x593bd878	0x45d3066a
+-	0x9fcee8a1	0x3f29b2fa	0xc9ae58ee	0xed6def92
+-	0x6c8f2182	0xdba64e20	0x276c2c21	0x81ea9dfe
+-	0x20ae00b2	0x8c2d2724	0x66c09f5c	0x24908e2e
+-	0xfecf8194	0x6be61e94	0xcdf5d7db	0x98b829a3
+-	0x4241ab07	0x1207ef2f	0x96e7b073	0x766293ea
+-	0x58eb0882	0xf12a6426	0x741b074b	0xbd4302cb
+-	0x909b6c4f	0x1c4949cc	0xd4d6a3e9	0x442b74b3
+-	0xbc8cb3f9	0x0efad89a	0xa2ceff3d	0xecdf86bb
+-	0x46a4a72e	0xe9d8abe4	0x94c91479	0xe99a80b9
+-	0x1072b708	0xb8318ad3	0x0685426f	0x3e89a0d8
+-	0x0b7c438e	0xb4b577d0	0x046599e2	0xd0ef85f2
+-	0x3566d2d2	0x43ade22b	0x8753a78a	0x8f6d8e02
+-	0xbdf33e56	0x8b2b6696	0x22a5e911	0xd0e0f4eb
+-	0x42729c29	0x425921fb	0x82f7634e	0x2c145fd5
+-	0xff59deeb	0x018a5372	0x33c4e11a	0xc001c097
+-	0xf250cfcf	0x2f682912	0x21f40dc0	0x883196aa
+-	0xcd5c58d0	0x7c329754	0x481c450e	0x9411c6c0
+-	0x69a9df82	0xacb01a1a	0xc0b569a7	0x0b7fd1a9
+-	0x4c339ad3	0xb0d9e211	0x07098664	0x14a5cff9
+-	0x53beae37	0x4e173257	0x4e1d2e6c	0xce981dd1
+-	0x45d6204f	0x3c193268	0x4f51ac3c	0x5ecffa12
+-	0x48068ee9	0xde12270f	0x0a0aa980	0xd6fe8ca2
+-	0x97d51da8	0xccf2db36	0xb3ad0598	0xbc56eb56
+-	0x0adf5e5e	0x9e320aa1	0x8ebb75ef	0x3973a323
+-	0x7e3d87e0	0x2c0d1858	0x83b7fa0c	0x36effdb5
+-	0xcd9eba1a	0xab5b5790	0xa48fbf00	0x536e2ae9
+-	0x2f2a3f61	0x05706a73	0xd2dfed08	0x7e4626b1
+-	0x172c6ced	0xbf2e44ba	0x15aefc2e	0x9cf56c37
+-	0x663c6695	0x04cece5f	0x4ce00027	0x465b1cd4
+-	0x333dc2c7	0xce41f1f1	0x6dd8503b	0x52b79af7
+-	0x564c81de	0x0e5e2daf	0x869753f5	0x16667889
+-	0xe1acaf08	0x38ffbb0b	0x83400589	0x5144052f
+-	0xa3819950	0xd21501c5	0x1bdadeda	0x0a874e2b
+-	0x05480284	0xe8f76f11	0x582cad8a	0x0553f942
+-	0xb6451cb9	0x76bdc86f	0x96ffe0c7	0xc630eba2
+-	0xa82ec683	0x5902ef45	0xc362248c	0x18c412a9
+-	0x1d09c103	0x2355ed98	0x5ec5c718	0x5037e359
+-	0x1508f804	0x09cfea9d	0xa16cbdfa	0x5f962b17
+-	0x85a35a27	0xa048dd30	0x6fe7ba90	0x0dc20150
+-	0xcb56daa0	0x4188fb20	0xb4182598	0xa1bc5dd7
+-	0x8c11e0bf	0x2104df35	0x025e74b8	0x79d177df
+-	0xad74bb77	0x4b2419aa	0xe374add2	0x411593d5
+-	0x796778da	0x9e43a420	0x4a2e0860	0xefb48578
+-	0x47cafbdb	0xea15924d	0x70ac1467	0xf52fd888
+-	0xd2df4bd6	0xc1fc63bb	0x119ab88e	0x0e147ead
+-	0xa85bd8b5	0xc2e61ddb	0xd566417d	0x6bb9f9ec
+-	0x69bbcf1e	0x24d46989	0x3caf067f	0x58151211
+-	0xc2a6b6e5	0xb233416f	0x3da28155	0xf9cd9385
+-	0x7a530045	0x1eab05ce	0xb86ed141	0xa8f13a5b
+-	0xf9819f81	0x66d5d5c5	0x148c1a02	0x496d3c56
+-	0x370dcd45	0x5f13f0b6	0xdd4eaeed	0x8dbad50d
+-	0x0747ce54	0x69d2adcc	0xfb69c18f	0xd44ea186
+-	0x74ab7537	0x0c642449	0x88b096cf	0x3a8ad683
+-	0x408cd7aa	0x6daa6708	0xb267b312	0xa4225c7a
+-	0x7a56dce7	0x6a8d497d	0x8837bcbb	0x6125397c
+-	0xeb51d233	0x362bdde9	0x689657f7	0x32d09e1f
+-	0x753a3d39	0xf77db5b2	0x8057908a	0xef12815d
+-	0x594fffe6	0xcf3402c5	0x1a0d4923	0xca547b2f
+-	0xaf9d604d	0x5d2e30f3	0xffe18005	0xe29bb0d9
+-	0x36fc10f9	0x3720aac6	0x37bc1ad3	0x47d000ae
+-	0xa4b0da0a	0xa178228b	0xdd9374e6	0xa1f3df5f
+-	0x9ae2e451	0x21c4aceb	0x8f9fb226	0x5190b712
+-	0x70253633	0x9c9cb5f1	0xc9178689	0x551c1a2d
+-	0x6db67cc0	0xcf1b1ade	0x48449272	0xd18634f1
+-	0x9d9c3de7	0x19025530	0x121d78d4	0xae4a39e1
+-	0x62850819	0xf3d4af6a	0xe5ad5b80	0xfa053c7d
+-	0x7ed68b9a	0xdbde2894	0x4b5c04de	0x65178203
+-	0x9181cdd8	0xb17e27b9	0x0e29b338	0x50156ab4
+-	0xf7726438	0x178108d6	0x1d8dc6b7	0xc3e7512f
+-	0x0eb8339c	0xe2684a6f	0x7668ed31	0xd0ed6eda
+-	0x4342a534	0x03840286	0xad1e6969	0xa9a6c98d
+-	0x1bf77774	0xd32fc9d8	0x405620d2	0x8ab19efc
+-	0xce4d7506	0x6f4eaae4	0x3e830dbd	0x76818782
+-	0xfde4ee8d	0x1953cd0f	0xd47be276	0xf2480bc0
+-	0xd1010013	0x2dd56a58	0x083084f4	0xc91b0ad6
+-	0xc2524e12	0xa60710f2	0x3d955047	0xce380846
+-	0x0f6dec2b	0x604d1492	0x5ca43ee1	0x6b51a626
+-	0x350d5483	0x8d99ae30	0xcba06491	0xcc0185eb
+-	0x7b64caa6	0x2f1754db	0xca0691f1	0x6219efb6
+-	0x43291db0	0x259d3f12	0xeaf6ef9f	0x5f0e065b
+-	0xad576541	0x8615a414	0x81124bdf	0x62b855a9
+-	0xabdc529f	0x01bfdf75	0x10e4c656	0xf8e86f78
+-	0x1fbe10d1	0xa6873c2c	0xdf83dcd8	0x20d35872
+-	0xf46f2861	0x22f3d642	0xfdcda29a	0x16adbdb4
+-	0x01e5844c	0x011e5454	0xf5432b04	0xd5f6a80d
+-	0xb081fab6	0x64fc2fbd	0x4ca76e0f	0x3a8d8b29
+-	0x3f03ec12	0x58e2bf6c	0x24f2b8b1	0x108e414f
+-	0xe76a02ab	0xcb525af9	0x623ba7a3	0x31412c27
+-	0x69c2f5db	0xd5546d8b	0x8200d2c9	0xf1e34a71
+-	0x393e24dd	0x2b867933	0x0596e778	0xc5112b49
+-	0xf433cdea	0xbc505e7b	0xf64bb064	0x1e892633
+-	0xbf17307b	0x9118de2c	0x6b1d61a8	0x1945519c
+-	0x32638ca4	0x5e436733	0x3dc20ff6	0x9babf127
+-	0x485c1555	0x0d0c4e2d	0xc4d5d718	0x8cfffc16
+-	0xf64050db	0xaa4ef416	0x8d398a00	0xe4a16eca
+-	0x5d9d9314	0xefa2bf1c	0x05917dd4	0xca5f1660
+-	0x59642534	0x02639b9f	0x12b895df	0xb2deaf0e
+-	0x20d8f0b9	0x04d8342c	0xa1ba5f57	0xa26cdb06
+-	0xca732ca8	0xdce0c561	0xf5e4b205	0xc05f5cfb
+-	0xba4a41a6	0xaf219d7b	0xce08df01	0xa02bbdb9
+-	0xc1adbc20	0xcb9ae4fd	0xd828cfb5	0x690b17db
+-	0xd29ae8bc	0x8fc71289	0xd6fc9cf6	0x61c7a6fc
+-	0x8e8012d5	0xd3320498	0x36e80084	0x0036d3ab
+-	0x53141aae	0x987d0cba	0x57581df5	0xace4704c
+-	0x3ce49642	0x991556c1	0x6cb0b984	0xac15e528
+-	0xe7d208ca	0x2486d1c5	0x93b6623e	0x340b7622
+-	0xe7e1cf7b	0x3cdeed88	0xa23c849a	0xcc6e8b3b
+-	0x292add5a	0x17763ee1	0x9f87203e	0x72cf4551
+-	0x2053e66f	0x06c3a411	0xb61c2e0c	0xa4a7f3ae
+-	0x0ff87dbb	0x03999ed8	0x48aacedc	0x2e126ef3
+-	0x799441bb	0xaee15b4d	0xea08bf54	0x47248787
+-	0xb60afc11	0x8c3d6a20	0x7c04f801	0xb902760e
+-	0x319040eb	0x370bbd5d	0x9a1dd5e6	0x63f7da1d
+-	0xb3784eac	0x3b304dea	0x987ada9f	0x2b6b1cda
+-	0xf9241003	0x0d3d16f2	0x1185dcbf	0x519b7a5f
+-	0xeb612361	0x28b57da5	0xdeb8419a	0x0ba13122
+-	0x062e28fa	0x5ffb9b36	0xb1258247	0x8337401f
+-	0xed1f6423	0x730cafe6	0xf728c690	0xe40557eb
+-	0xc4951a15	0x04a988a9	0xbf5fe18c	0x2766e40a
+-	0xe4d74d13	0x8638d052	0x8eefeaf2	0x9ad07978
+-	0x32042a87	0x4385f38d	0xc9b48f02	0x02ab0ae7
+-	0x9eaeb632	0xf386c14d	0x8b1c2ab2	0xad432a24
+-	0xfc5bd462	0x2d7ac5fe	0x45dff5c6	0xa235e1a6
+-	0x825b770c	0x5568471b	0xa7ac3a3a	0xfcc6e40c
+-	0x0c1be59c	0x77685a3c	0x5b1bafbd	0x40b8a139
+-	0x3dd1bf01	0xb6651001	0xf2915a6a	0x16fe1cf2
+-	0xe78467d1	0x4bec9fb1	0x88615320	0xa3920831
+-	0xed4afac7	0x206cffba	0x96c42567	0xcc2b5215
+-	0x7ca0193f	0x0e1a60e5	0xf3892c10	0x2ceee7b2
+-	0x110d3311	0x9a322e7e	0x3cb7e5fc	0x3fb971c1
+-	0x59971332	0x08386001	0xe4a2444d	0x17d9c47f
+-	0x9f53c4a5	0xdb54e5c2	0xfaac9f08	0x975c07c6
+-	0x8a6e6bcd	0x4392053a	0x6473bef8	0x4b3b91a3
+-	0xfb7e8ebc	0x46c6ffed	0x04939839	0x71b93766
+-	0x47e4f74a	0x786545c8	0x77f55b59	0xdf8e992d
+-	0x60a0d2a5	0x6cc8a5cb	0x113ee95c	0xa378558d
+-	0x5d3b8bd9	0x3c95b2a8	0x6efa3682	0x9535dd34
+-	0x3e29974d	0xa477d069	0x2dbf58d2	0x165edae3
+-	0xea25d53d	0x44e3ef71	0xba6341cf	0xc61b964c
+-	0x4612838b	0x62151b9e	0xc1de2511	0xa364130c
+-	0xa9710643	0x1a436c70	0x97030b09	0x5cef28e0
+-	0xd5197e49	0x02b9ffa8	0x1b52dc7b	0x04f9428b
+-	0x01ebed2a	0x1eaecbee	0xc53c4d54	0x3e34c125
+-	0x05b4f37a	0x6e3d042b	0xf1c1f40d	0x39cfe9e1
+-	0xd2938e89	0xa14b9846	0xb1333676	0x31068254
+-	0x4b627e4b	0xb5185882	0x101b52bc	0x73e05abf
+-	0x68a4e24c	0x67e301f4	0x6bf8b538	0xc502e1e1
+-	0xc3889b5b	0xdfbc6d96	0x4239d0e1	0xbf3667ab
+-	0xb0c4cb00	0x3efdcffd	0x7cd9661d	0x4f5eca03
+-	0x0ef218dd	0x464f0826	0x048fc539	0x6a1c63fe
+-	0x76cc341a	0x1ae2945c	0x7a339006	0x858fdc20
+-	0x2a4a7270	0xd4cbe12c	0x7b27e5d8	0x998cf520
+-	0x4795ccf7	0x52e15388	0x86aa7b96	0xff1845fa
+-	0xd49d1061	0x035b6a80	0x1df18220	0x28fc4fd1
+-	0xa8e8f333	0x3a9240a6	0x41a4caca	0xee736b6f
+-	0xdfa7ce4b	0xd4bf5c0c	0x4e62f6d3	0xe98ae9b4
+-	0x7f544550	0x2b0706df	0x8fb2e752	0x546af9d1
+-	0x8517758f	0x53f522fc	0x03bd1819	0x6fd264e2
+-	0x16839ef8	0x44a1200d	0xcd5a586b	0x1ead251c
+-	0xf58dd3be	0x80217ce7	0x0367ff42	0x2d8f2ce8
+-	0xe8a0a689	0xba33e366	0x5dc7980d	0x005c0eaf
+-	0xc0c44118	0x5553076a	0xdaf39389	0x703e09eb
+-	0xc54c8112	0x4a26135c	0x36a46f2b	0xdc93ee12
+-	0x7060db72	0x7778befc	0xe028fc55	0x52e86278
+-	0xd0b00188	0x6ed5565a	0xb5e2785c	0x3608bffa
+-	0x55c3f5a3	0xe1e41afa	0x08a227fe	0x94c793ce
+-	0x650934f7	0xddc36524	0x6dac40de	0x9eec3ceb
+-	0x8fe3d1cc	0x3cebab86	0x61e4d63a	0x5382ea11
+-	0xa90c9495	0x0277ccb3	0x412cecc1	0x5853c945
+-	0x97df9a48	0x364d9b10	0x7e8c9bf1	0x6b4974ef
+-	0xd3dbaeeb	0x6626dd26	0x2b746d2c	0xfb762155
+-	0xf942f687	0x1317d1b5	0x0c989def	0x5f4c0ed6
+-	0x31aebbd3	0x51cd8d5b	0x3d729511	0xc07c8f23
+-	0xa7f3e6f7	0x7683dba9	0x5f051d5c	0x750437f5
+-	0x1b9ffe98	0xa4de609b	0x4c498e9a	0x18dfc535
+-	0x376c6c34	0x19a57039	0xa70e93eb	0x7e966bc7
+-	0xb6e9d77a	0x3ab98e5f	0x1607125e	0xe8845aa3
+-	0xa20a2d80	0xb17ac63b	0xa07a9790	0x71e5a14f
+-	0xb6b5fc78	0x4c610f86	0xb57b21b6	0x1bcfb3ac
+-	0xbf812998	0xd429986b	0x02b837e9	0x0823aca8
+-	0xd8a85194	0x708bad39	0xff94ef19	0xc3599461
+-	0xaee622f6	0xa8b5a808	0xf801b298	0x0aeb35b7
+-	0x4db4bf27	0xfa31c205	0xa047dc66	0x7e0ae406
+-	0x2ceea6cb	0xef0ef96f	0x4cc4fdba	0x6161256f
+-	0x94505fd1	0xbced5596	0xbf9e36a5	0x271e68bd
+-	0x7a3308b6	0xef1af50d	0xb55ede06	0x6783e602
+-	0x1152acf0	0xdc644ccd	0x1b692da3	0x59f6886b
+-	0xd7236158	0xe39d75a6	0xe7026697	0x25496283
+-	0xb6b0a61c	0x09d0931c	0xe8d459a1	0x1a124097
+-	0x88e50621	0xf2ed18ff	0x37681783	0x4afa1ffc
+-	0x8a96ec4a	0x4474a860	0x274591b1	0x59df3968
+-	0x34f56fb9	0xce821f96	0x7ec825b2	0x6ed4a9bf
+-	0x687253cf	0xa511c1d3	0xaf2bd6f0	0xd1ce1a5c
+-	0x241dd505	0x39037238	0x0c761934	0x53181db5
+-	0x11ad47ec	0x915a527b	0x748bc970	0xeb8f2669
+-	0xb8bfd5af	0xd8d19145	0x0361ff58	0x6dc6e2f2
+-	0x1fd06556	0x120db4c5	0xbd704c8b	0x70a1a57c
+-	0x27543851	0x095403a6	0x28171887	0x640e7c92
+-	0xb48fd7d1	0x62ad2774	0x224767cd	0x347b8843
+-	0x821ca7f3	0xf94749c6	0x2bc7f40f	0x700cc1d8
+-	0x50d50832	0xc2f9465c	0xa6e1cbaa	0xe0f5e934
+-	0x7f33617f	0x8876cb07	0x408c24fe	0xc0cfcdf7
+-	0x39152b72	0xa0ba80ab	0x301a73eb	0x6e704f6c
+-	0x3b73c24b	0xd433f861	0x43192007	0xa56d2ca4
+-	0x2d28bd5d	0x14f4c9cd	0xb7fe189c	0x031e1818
+-	0xf8f4133e	0xdc8e7727	0x4f8f5a06	0xe7b114cd
+-	0x5cb9ff12	0xdb4c5a53	0xed956df5	0xf3634f5f
+-	0x6cce1cc2	0x5393f9ac	0x1184c2f7	0x0b6fd240
+-	0x64771374	0xaafed1a1	0xbdc55bcf	0x976414ef
+-	0x6a333e56	0x0c5cefb2	0xff2574e0	0x11b059ef
+-	0xff8b7f2a	0x9651e97b	0x594fe89b	0x7be60f6a
+-	0x7b7695ac	0x612036f7	0x5be0d4fa	0x25855737
+-	0x12e32ee2	0x8e86130f	0x46d75d41	0x3769d438
+-	0xd14752d4	0x1612ad6d	0x8f86f2a0	0x63e01251
+-	0x9a44ac4a	0x49fdb148	0xe1757062	0x42798804
+-	0xf21f46c1	0xed0a3794	0x5528add4	0xeddc0c90
+-	0x7f188ce8	0x59568b7a	0x8e25d50f	0x9277c492
+-	0x955c6e6a	0x79f94a59	0x3a65fb08	0xceb23267
+-	0x7d8dce01	0xd15c492d	0xa35f005c	0x0e7cba9a
+-	0x950485d9	0x2d92e448	0x4aced016	0x0d10136d
+-	0x3d2ec365	0xd982e881	0xe81940d2	0xb1a84849
+-	0xdb30d967	0x9f51d3d4	0x4fbe18a9	0xef21cd28
+-	0x5d3cba6c	0xaa89b02b	0xbe1e9526	0xa20a918e
+-	0x0c26bd72	0x8372eff8	0xcf7ab414	0x1d3ab83f
+-	0xfd2c8f79	0x4929f77e	0x2416e8df	0x65dcaaca
+-	0x58fbf7b3	0x1c4a3089	0x9bfb6e26	0xc7338ac9
+-	0x88e5ad26	0xc62bb3d4	0xad6d36f5	0x6445167d
+-	0xe9de8daf	0xc391c6bc	0xa78b4558	0x0216bcdd
+-	0xbd4365b9	0xb0a874b2	0xe95e9453	0x77296b9a
+-	0x49803c1e	0xc01fd0ed	0x165a9d5d	0xf7da6442
+-	0x4c00818d	0xaad5bfca	0xdb252937	0x0e4e0f74
+-	0x0c2738e8	0xd075b8ba	0xe3b2df11	0x8aee60a4
+-	0x36052cd8	0xb4aa190b	0x413e7155	0x3e7e646d
+-	0x807e6eea	0x97993e6f	0xa5129ff5	0x98e01bca
+-	0xa8bd70c9	0x8800721e	0xb3407ffa	0x266b2f99
+-	0xd9da73ee	0xa06f634a	0xcaae53b1	0xd98e53c6
+-	0x49368291	0xc89485fe	0x938a8a29	0xb57f77cc
+-	0x58c867de	0xcdac8a84	0xf4d57b6f	0xc6daf080
+-	0xe3d9c67f	0x0264b194	0xc3b2ca50	0x6d214667
+-	0x88503872	0x549ed8cf	0xe827689f	0xcbe94e2e
+-	0x4a02516d	0x24ddcfa1	0x3cbc736e	0x34c88707
+-	0x9f4c9376	0x4ced4d41	0xfdbabfb5	0xafd291d9
+-	0x2fa602a3	0x53e19d9c	0x44422427	0xf85e2c53
+-	0x40e91ef7	0x02646045	0x3d1fa703	0x1613b99f
+-	0xa108de10	0xf9cb3d04	0x7b9f9523	0x007d74b1
+-	0x961771dc	0x2e49fe1b	0x5fefe27d	0x54737b43
+-	0xa11d7c40	0x7f0cc2d9	0x67c6533e	0xd1ab10fa
+-	0xb1950645	0x536087d2	0xd6937b40	0xc35960c1
+-	0x2df0c356	0xecb5ab53	0x61e08998	0x1671bdd0
+-	0xd72935b5	0xdf1a9d7c	0x70b1aa4e	0xa9272818
+-	0x1f7b8d55	0xc7292a0f	0xda7af847	0x190076ad
+-	0x58370ba6	0x3020fb4e	0xff8a4b30	0x13818958
+-	0x6ba1ca38	0x6a90d39b	0x5e180929	0x206e8a22
+-	0x0568f241	0x5f83ad21	0xef05e5c6	0x21d0521c
+-	0xe7886eff	0x68eebbce	0x550c1659	0xa0843444
+-	0x19468c2b	0x539cb9b8	0xa4b18b62	0xdab0680e
+-	0x1b254dbc	0x47068aaf	0xa8193743	0x44b60b88
+-	0x90c07337	0x2e55666a	0x632f4b23	0x68af10db
+-	0x8e29f54b	0x5f436bcd	0x8bf81d55	0xb640ccc5
+-	0x2e4ab6a9	0x198697a5	0x8a1c8481	0x572fb679
+-	0x7597c416	0x608fd45e	0x57c8c7f4	0xe151d349
+-	0xed9e17bb	0xa66f2816	0x8175fe68	0xd57d91ad
+-	0x79df0711	0x7a349868	0x13403cd4	0x7d974c60
+-	0x8860ce70	0x2e6d62ea	0x8916e2f2	0x0e336838
+-	0xf54d382d	0xc4e172c8	0x94bfcfbf	0x5fa53172
+-	0x2933cecd	0x4d5b8439	0x0ca0e6e4	0x8ef87b00
+-	0x2fdd121c	0x24beae76	0xa85b47f4	0x4e38af2e
+-	0x12b8734a	0xf698abf4	0xde2c2d93	0xeb100795
+-	0x8ab19df8	0x93a6f4d1	0x43c4b2cb	0xbaff7c4a
+-	0xf52b1471	0x72804f4f	0x0c0ca257	0x1dc24c77
+-	0xbad7203b	0x3a998fa0	0x9cb20388	0x7ef1fb3b
+-	0xbae66020	0x9a22144f	0x39ac47db	0x3f145996
+-	0x05a32b6c	0xd201a2ec	0xd868727f	0x08b2df4f
+-	0x4583bbfa	0x9a422baa	0xa6a2e8f5	0x236310ec
+-	0x5aafc3cf	0x344156a6	0x6f964ceb	0xed0495ae
+-	0xb5638c98	0x2c8e84ba	0x63d8c7a5	0xec956b66
+-	0x69c54f32	0x767874ec	0xe8fb6ce1	0x68b1c780
+-	0xe4b861e4	0x2787cc38	0x4b2202e7	0x23b476be
+-	0xecdf296f	0x094aa000	0xe95ef073	0x4182ebb5
+-	0x30daa31a	0xef68cb68	0x2fbcf6bc	0x21c52620
+-	0x19abf83e	0x4de7528c	0x05fe4c05	0x32c2a1e9
+-	0x8c23abdb	0xabba9a90	0xa6a215c1	0x891f915c
+-	0x667cd65a	0xaa5a9b2c	0x689fd1e9	0x42b52c95
+-	0xd9872e76	0x05dd5278	0xc19798f7	0x8d031d86
+-	0x25690670	0x165f4b19	0x76b51d6f	0x61cd8232
+-	0x7b530271	0xa8e9326c	0xd952e94d	0x56a7021b
+-	0x128be860	0x4da40144	0xeb4ac3d5	0x82b7ff5a
+-	0xea2abda7	0x690a9ebc	0x33562378	0x6bc91b2f
+-	0x46134185	0x8fb77fb2	0x029518a2	0xe1fa1f4c
+-	0xf78783b9	0x5d8ebe63	0x103e8050	0x924085bf
+-	0x80593f2e	0x5be4bcb6	0xcb935edd	0x882d0a5f
+-	0x7deb8205	0xcdc0fe2e	0x9c333db4	0x1d0c888d
+-	0xf8dc3575	0x2f901125	0x6bf48cdb	0x98ab6fb4
+-	0x491d7df2	0xa064922e	0xbbb86c70	0x88aad77d
+-	0xfcff0669	0xb0c47c1c	0x0fcc6fe1	0x50df8a83
+-	0x014460e4	0xb014e6ab	0xbeff4bc5	0x8d939fae
+-	0xd750ae17	0x42dd29c9	0xdb1cbf70	0x82265be9
+-	0xd11afd6a	0x21834e1c	0xd11e3c3a	0xbe568139
+-	0x6cf92d50	0x9304ebf1	0xf177046b	0xa5b127a5
+-	0xfb57e4a7	0xf94291df	0x0f089d58	0x07395b5f
+-	0xde4ba5b9	0xf7371fc5	0xae44f190	0xd529271d
+-	0xbcaea246	0xfa777c0b	0xad3bab9f	0x0d6251ec
+-	0x6f4fa894	0xc39273e2	0x7710fcc3	0x81f08a5d
+-	0x395b54ee	0x87295638	0x57398bb0	0xfd46c7c9
+-	0x3f1dafc6	0x548479b7	0x37c42fba	0xa2130147
+-	0x99dc0bb0	0x3596c5cf	0xbcca6bec	0x418735ed
+-	0xfcd4273d	0xee141135	0x8457cf47	0x95fe7220
+-	0x041aaf8a	0x6e947153	0xc963afa7	0x09390a74
+-	0xc40dffd3	0x4208039c	0x319b1f84	0x42b6b3b7
+-	0xade789da	0x83338c91	0xf2d74712	0xe80011dd
+-	0xdd61645e	0x286fc63a	0x26e2fb23	0xfef2b4ea
+-	0x3290efb8	0x595a0c17	0x6cd9bea9	0x7be1338e
+-	0xe0ff2c09	0x1b93aea5	0xbbd97e91	0x5e1ae1e7
+-	0x7c6c078b	0x0b9b3a03	0x43d38011	0x824cd94b
+-	0x9725170d	0x87ce6f33	0x60525d85	0xc0a5e853
+-	0x242e613b	0xebf72857	0xcb500fc6	0x0de5c3f0
+-	0x382b625d	0x08840e50	0xcef30663	0x1bc848b6
+-	0xefa78141	0x81b860d6	0x4eb125fe	0x7e125296
+-	0x276a5558	0x45caa775	0x7c6ec23c	0x5dcddd08
+-	0xc41aa32d	0x6a2851b1	0xb69ae1c1	0x8f603c43
+-	0x763497f2	0x73344cbd	0xcffd175c	0xfccf5a91
+-	0xb2318bf7	0x66ac628f	0xa98fa975	0xb68e5426
+-	0x27555715	0x5157a93f	0x666fd404	0xb37fcc40
+-	0x563b0512	0xb70f8446	0xe10d257f	0x73793ef2
+-	0x31a84915	0xe0de9489	0x08dfa368	0x9169d4fd
+-	0xc14f5c9a	0x92e6db4f	0xa30b6cec	0xca04670e
+-	0x8a664367	0xe8984e70	0x1c96a39c	0x655f9abd
+-	0x6999a190	0x76267621	0x0f49f963	0x8ddad3a1
+-	0x51fdab6a	0xaf0d6863	0x23b71bdb	0x32818c8a
+-	0x6398044d	0x26c60bec	0xb0b631fa	0x938f69c7
+-	0x52f11913	0x1e6fbe7a	0x92dcd409	0x419bfeae
+-	0xb147bb96	0xbac5bf9d	0x08de155a	0xde8ca968
+-	0x20aef902	0x62df25a8	0x64a4042f	0xef19da4e
+-	0xc75fd112	0xc9863e47	0xaccfdbcb	0xd29b6090
+-	0x6dc67b4a	0xa84b3cd6	0x45a0e708	0xd28673bd
+-	0x00bebebe	0xd5e518d7	0xc63d647c	0xa28f5f6d
+-	0x3372edc8	0xa1c44ed1	0x88e61d44	0x5e095835
+-	0x2d8713ce	0x6791a885	0xae89c04a	0xf1dc5105
+-	0x6423f3b7	0xf4e2f384	0x2d2761a7	0x38ea905d
+-	0xa263d776	0xd1936fa6	0x2fc54081	0x429a25c2
+-	0x13f6c5df	0xffffa6c1	0xfaf82002	0xe4bbb103
+-	0x2fc0c622	0x669ee281	0xec785fda	0x91156b25
+-	0xa9f4444e	0x354fdfc2	0x7c5f5069	0x72ae591b
+-	0x73bfd64e	0x6b96d744	0xf261daaa	0x2de15dae
+-	0xedaba9c2	0xf287b3fd	0x8b2097b6	0x589934c0
+-	0x7edc2a73	0x469b16eb	0x247b9a22	0x8b7e6c7b
+-	0x3e71ffe2	0x5275f242	0x032a211f	0x977bff60
+-	0x4306ad03	0x6a212383	0xceb36448	0xa2a79209
+-	0xe3842f42	0xcee0cbe7	0x37cdb626	0x29a0a515
+-	0x2857ead6	0x981d5d9b	0xf0ff9b06	0x95de8cad
+-	0x4dcb565b	0x065d585d	0xe7eb754b	0x278fa774
+-	0xe4d8fb7a	0xe152f018	0xfb7bb25e	0x50323b64
+-	0xba618e43	0xf8cb1c61	0x1b6dce25	0xb4fc7867
+-	0x2a7fb213	0xea9e646e	0x3f9b735b	0x5640315d
+-	0x0793ba5b	0x71ff31fb	0x4b41f1d6	0xb1538146
+-	0x336f4272	0xf176d509	0xb7fc03c5	0xd6a1c927
+-	0x56a68c10	0x8b4740cd	0x14c54f8a	0xf07ad8a9
+-	0xa8403db8	0x37c23f2b	0xdca69aba	0x4b39ef9d
+-	0x2af13bdb	0x6baace1f	0x8c7ca0d2	0xba86bd02
+-	0x2a74681c	0x5542ae58	0xc36709e2	0x82b34568
+-	0x26ea06be	0xd4bf458c	0xde209de7	0xa311b4e5
+-	0xdc00e139	0x7d305958	0xc5d76ed7	0x0943a285
+-	0x48ce4e29	0xe371bd9a	0xfe6a6501	0x4167d215
+-	0x402e47ba	0x588458be	0xbf4bcf37	0xf7fa27a8
+-	0xb725f91a	0xc17f5c07	0xce771dbe	0x66f9d592
+-	0xe8521ed4	0x42f75171	0x343b3e74	0x2d5448b5
+-	0x2d1fca8c	0xd7a32431	0xc29a88d2	0xffb07fd7
+-	0xcca0333f	0x43204f2f	0x866c1867	0xcb215814
+-	0xfcb67d4f	0x423680be	0xdf22f6d6	0x03373eda
+-	0x3bd202e3	0xd8972fe3	0xb7733d70	0x7a472c76
+-	0x6cc8a627	0x3b27e643	0xa3475f3f	0x87ffb286
+-	0xf823d69f	0x6d57c38e	0xa0fd464e	0x53e2e341
+-	0xaaab23ef	0x439429ef	0x55ba2a2b	0x4da5ea4c
+-	0xc1fe05fc	0x874b7a34	0x9a875956	0x713ccc90
+-	0x49afcff2	0x5905dc0b	0x1f5dddb7	0x8ef5c1d9
+-	0xf60eca50	0x25172569	0x3525639a	0x25804bbe
+-	0x5729cd49	0x17f84e66	0xc540d86d	0x51524bc9
+-	0x9a6e9901	0xf5bcc70e	0xf7a73ffd	0x54509c8f
+-	0xec58b8a4	0x9993703b	0x6ef45fc4	0x5ce3a507
+-	0x1d73c611	0x8780e8ff	0xc7d2e02b	0x0bc825f2
+-	0x02f75fca	0xe80c0758	0x24646fe9	0xd378ff5a
+-	0x592c5619	0x6c80372e	0x1f7351d1	0x4db5182d
+-	0x3985fdfb	0x16ca9158	0x58ee1ae4	0xaf2b9fa0
+-	0xe97f60ce	0xbb911e68	0x01748fa0	0xaef578d3
+-	0xc3736418	0x8ab0deb5	0x0de16af1	0xb8369f7b
+-	0x68e43c12	0x914ca0f6	0xe950ef28	0x834eff90
+-	0x51adb952	0xc42ee4ce	0xf70ab4a5	0xbf9fc916
+-	0xed9444b1	0x845a6a1e	0xf92e7b64	0xb9ca8a1b
+-	0xa9cdfcd0	0xb5956bc8	0xb8520e59	0xdde7aa57
+-	0xb41d390f	0x364aef3c	0xf39d4482	0x8b4e651e
+-	0x0b82f5fb	0x7960e81c	0x12ed7b84	0xe9f123ca
+-	0x88a64db2	0xa0c714cb	0x57b01471	0x80ff31a6
+-	0x7571d8cd	0x857035d9	0x0508587c	0x594a4a42
+-	0x011503e5	0x27c75e55	0x03264f62	0x9316ed1d
+-	0x36e5cd1e	0xfa9b23b4	0x5bc8c606	0x0902bd38
+-	0xd6745c69	0x6fa73118	0xa50f7b94	0xc529e962
+-	0x28738486	0x7b85a599	0x2c495a35	0x85f2cbef
+-	0xa09dfe51	0x1c763ab2	0x4effdb5c	0x506586f0
+-	0xec182a58	0x45293146	0xaf8d78b8	0xa89bd228
+-	0xec24826a	0x752cc421	0xbf36aa46	0x6760e225
+-	0xe15d0987	0x6fa9bdf3	0x6837c755	0x9426d654
+-	0x14b48f5b	0x5d70567d	0x63a14f92	0x809d5361
+-	0x3b6e2729	0x84ce5415	0x7eaca6e0	0x9b467302
+-	0x8f39d484	0x8e78398c	0x33108b33	0xdc07005c
+-	0xbdc2500f	0x35f1f452	0x9d254e3d	0xfa61eb21
+-	0x2ab6c7aa	0x83561fdc	0x8735d598	0x416e8591
+-	0xfe10e93a	0x18da409d	0xab6d0bfd	0x675baaf1
+-	0x287fdd24	0x6b50b63c	0x8c08abca	0x871a59c9
+-	0x41bb2ae4	0xfba9abdf	0xb46491c7	0x4e433d5a
+-	0x01e4fbda	0x0bc40399	0x3bdb61c2	0x3cf051ba
+-	0x910daa46	0x8d4065d6	0x270667eb	0xf6d42459
+-	0x01993a1b	0x00a95dda	0x6ed5a693	0xed4fbf7b
+-	0x24dbb70f	0x67fd62ee	0xcef5f0a4	0x9e65b798
+-	0x9a9913fd	0x3d0e7190	0x4265b4e4	0x80bfc46f
+-	0x6b354d2c	0x2b90a987	0xc989cb75	0x773e6b64
+-	0x55325e9f	0x18816a56	0x07413406	0x5177ae31
+-	0x24a19ef7	0xdac405a4	0xdca2d3b4	0xab7c7b70
+-	0x42b5de0e	0xfcf918a5	0xa54d934b	0xcaa9eab6
+-	0x50e63e2a	0x4b168926	0xb2442913	0x594c0f94
+-	0xf387f31f	0x4d716749	0xc8433297	0x34c1a5de
+-	0xe929008e	0x5644251b	0x736476d0	0x0d00aee7
+-	0xf20b2f64	0x5e158173	0x9af3e568	0x5f19fa7e
+-	0xb23b2861	0x8659ee6e	0x94058a64	0x66ec4fb1
+-	0x37cd6a4a	0xbd2944fe	0x0ea44ec6	0xe7d64c24
+-	0x75a170e3	0xb4a9479c	0x2215716a	0x64a8a574
+-	0x257e86ab	0x86bae993	0x3030352b	0x15cb88bc
+-	0x576363a0	0x61138c36	0x7cc4fe7f	0x648977a8
+-	0x0ef71fec	0x1c60df47	0xc75f70ea	0x88509798
+-	0x172b407a	0xf888e400	0xef33cd15	0x5976757d
+-	0xf8cfef13	0xbf024380	0xbb9c1b02	0xe4c38ec9
+-	0xf30fce01	0x8efa5213	0xf4b48aad	0xc94c3a37
+-	0xeb1bcece	0x09a18b56	0x4e83c0d3	0x6fcf9f77
+-	0xf52f4d76	0xf3368a12	0x33b2797f	0x627b6e41
+-	0xefd05154	0xa83ae2a0	0xea211129	0xd25723d5
+-	0x7bbb0e3b	0x7131f088	0x5dd5193f	0xef5aa905
+-	0x39f77be7	0xa21b48c1	0x1ded01c1	0x5cf98c5f
+-	0x6e23d207	0xd7e7dadf	0x5932ed1a	0x2a729061
+-	0x29a89f4a	0xac0e8447	0x01ff4205	0x8b1456c6
+-	0x3fba0156	0x658c03f7	0x5c69f968	0xf6570582
+-	0x21bb0145	0x8683bf5b	0xa4b6eba5	0x4ccfe5cb
+-	0xd202898c	0xbd2411cc	0xc2fc702a	0x5c39b695
+-	0x87584ccf	0xeae3c735	0xc472b6f9	0x4249f637
+-	0x3fa89c0e	0xce5a8bd7	0xbb28138b	0xc080ecb1
+-	0x9cbf1916	0xd70424e9	0x75cc4ed1	0xa575f3e9
+-	0x1c571f68	0xe2906205	0xc26520cf	0xf9c1fc8e
+-	0x61c982de	0x1af6cfcc	0xaf397c9a	0x46830771
+-	0x623d98bb	0xda7b52fa	0x5a3c57d3	0xfa35d2f0
+-	0x4783df19	0x6ad07325	0x487406f4	0x3fae5152
+-	0x189137cb	0xd98a644e	0x17ffe880	0xeb6aa9f7
+-	0x67184e3e	0xe475734b	0x0f1113c2	0x39a4df47
+-	0xbf8f6ec9	0xe13a4d8b	0x63ec02f5	0xdfe7d75d
+-	0x1379034c	0x5db7314a	0xa9d9ad3e	0xfaaed8f2
+-	0xf0fb6074	0x12f27b84	0xc97a92bb	0xae5e3bb7
+-	0x5f7fc2bf	0x00cbc1f7	0x9360a4d9	0x3632ba04
+-	0xad044c83	0xeda13ec1	0x34a214c0	0xcf9c972a
+-	0x96352243	0xf1a35357	0x2d77bc30	0x8485bbad
+-	0x67fbaa99	0x8035b1a5	0x8ca763c0	0x109d7887
+-	0xa1c35cd8	0xdc79e308	0x4495404d	0x64419226
+-	0xacdcea08	0x9545c0ef	0x5493e09e	0x7fe16336
+-	0x41381aa2	0x5c344f46	0xb40cab9f	0xc43951c4
+-	0xd86e52a5	0xb141d934	0xd78efcff	0xf37ec320
+-	0xc184a45b	0xf4a57954	0xc8aed0bd	0xe602c15a
+-	0x71a6b48b	0xce837428	0x02733706	0xc4a4a044
+-	0xa75efb97	0xcb63d62e	0xd0580b5a	0xce499087
+-	0xc12bf4ca	0x9c995345	0x1d8adfbc	0xe62fd60e
+-	0xccbf5412	0x6161f8d0	0x64268e34	0x565d066b
+-	0x1896b63f	0x838f8f2a	0x1e314a00	0xac470276
+-	0x1879cfdf	0x4702d7f9	0x83b4d777	0x81fcb068
+-	0x1b6da94d	0xd075ed01	0x3c7734e8	0x56389a0b
+-	0x0743b9cd	0xb6b0bf0d	0x63107ab9	0x193172bc
+-	0xc7b84c8e	0x982ce2aa	0xb8e387a6	0xc264a4b0
+-	0x2ac6c802	0xb89ea335	0x052332a4	0x49932ecc
+-	0xb940f808	0xa7a09330	0x19f3f49d	0x7aef6b5a
+-	0x201d8ed0	0xf29aac4b	0x8ae2ac0f	0x998c1ca7
+-	0x665c3927	0xab4ef641	0xf136710d	0x9644ee9b
+-	0x34efae96	0x4c596035	0x8cfe8b3b	0x5d9f742e
+-	0xab2c63ca	0x017d864d	0xd0604d6e	0xab24eee0
+-	0x75916a9a	0xad0d1167	0xbeb47775	0x6ac822d1
+-	0x776907aa	0x9e9377f2	0x438c5d81	0xd70e9964
+-	0x1c09c914	0xab90e5cf	0x31cee523	0x26ba6ea7
+-	0xef00781d	0x622b886d	0x36a54031	0x88b1221c
+-	0x666333f5	0x60e1c93e	0x5e4d0e0a	0x3ee6ff69
+-	0xceb4c76b	0xa5deb4f8	0x0668ced8	0x30225378
+-	0x6697cf37	0xc5d9661d	0x089eab85	0x7684a876
+-	0x018a81af	0x221a7fb2	0x31d80de0	0x9f18ae90
+-	0xa29c9af0	0xc3e2b00f	0xda0edbab	0x7ee9cd2a
+-	0x3ab0f88e	0x02c58228	0x606fa7aa	0x7776cb0a
+-	0x4e8ad99c	0x3b527469	0x58123d62	0x4ce428d2
+-	0xee91a210	0x466ba2cc	0x043c57b9	0xaf7bdd43
+-	0x98e76fee	0x8f3eac1b	0x00dffd6c	0x6fcb1c6a
+-	0x5cb90573	0x485d4505	0x0df5418a	0x26eafe35
+-	0x0faddf3e	0x4e972930	0xe113c823	0xe45944d1
+-	0xa646077f	0xc1708ae5	0x6ba07c20	0xc7e4e234
+-	0xc6754ed5	0xbd6e85aa	0x8cc1756e	0x02afda29
+-	0x72809597	0x75b6f5a1	0x61141874	0x1774047f
+-	0x7a10afed	0xfac2c4ad	0x42cf5c99	0x24f0350e
+-	0x042f2864	0xfab55b67	0xc8ead5bc	0x914e9512
+-	0x77c8ef6b	0x8369aeb1	0x71bc947f	0x0c6b49d8
+-	0x8ddd0513	0x028ad10d	0x99a1b28f	0xe6cfbdc8
+-	0x7978b4a6	0x3ebbade8	0x9985f5cf	0x431f42f1
+-	0x004372b2	0x18b67f68	0x20111c21	0xbb6f77ff
+-	0x1783b030	0xa045d7d1	0x0e9c7e09	0x3ccbd95f
+-	0x0b84a2ed	0xf0ee3325	0x63f2e126	0x5ec4c67b
+-	0x2ca782cc	0xcaf20d04	0x8b59d515	0x3212aa33
+-	0x335ca0c3	0x6f9e0cdd	0x4d4bf189	0x44d2fa0c
+-	0x5abe9396	0x492794ee	0x10dcfcb1	0x9acda9bd
+-	0xe8aa2803	0x3f1b9605	0x3e2ecb5a	0x971bfa8a
+-	0xcbf141d2	0x0afafe10	0x2fc906a6	0xefad20c0
+-	0x9e922581	0xe69142cc	0xc9c0ba82	0xc069e640
+-	0xb99c08b6	0x4b62ca1f	0xf3c5767a	0x6ab088c7
+-	0x8f0f0c0b	0x6726f64a	0x9711a3cd	0x46462571
+-	0x3a58350e	0xa2561911	0xe24dfdfe	0x97443fdc
+-	0xf80540be	0x069978bf	0xb38a359b	0x8e574f62
+-	0x69aea75c	0xdc753fcb	0x2a74002c	0xced027b4
+-	0xda993254	0x03409b83	0xf827331d	0x75fb3271
+-	0x01ad839d	0x68520842	0xca65c45c	0x1a3db5a0
+-	0x91d37dd3	0x6168c0fb	0x935f5a08	0x002007c3
+-	0x42eb4760	0xdab3a804	0x72a6297e	0x905c32d9
+-	0x81abcfa9	0x1b21d04a	0x5a1289ae	0x424e7183
+-	0xc207906c	0x31fe9134	0x5eb2e5af	0xc9253fc7
+-	0xc32be24f	0xe5474cbd	0xeff6e1b0	0x710e5e69
+-	0xe6c4c538	0x96b5f1de	0x2abc9c35	0xddbd1a92
+-	0x8aca40d7	0xe359c238	0x954718f4	0x18b157e5
+-	0xeeed790e	0x6948a963	0x24e70bfb	0x4d681547
+-	0xf68369a7	0x5b54409a	0x1f0b787a	0xc2610047
+-	0x0f8bd269	0xd7c8c154	0x9dee62d9	0xd4738ed8
+-	0x1a66c6b1	0x5bad5a5b	0xb110311a	0xfaec6802
+-	0x6b750f2d	0xcbf8d0e0	0x11edaf4b	0xf64a07bb
+-	0x422e7c15	0xb1732663	0x1ff404f0	0x2d5052b0
+-	0x6e45356c	0x7e2201e8	0x7c5ebcd1	0x1cb4425a
+-	0xb1539a64	0xa2e4459f	0xcf1ade8a	0xfc476473
+-	0xf4147deb	0x2afbdd77	0xff01fabc	0x6597408a
+-	0x0951220b	0x6750f3ec	0x0a242763	0xf3d71c05
+-	0x84cb1c26	0xdb7a81bd	0x7aea1a5d	0x7e719a48
+-	0xc5c12fe1	0x0ce2e988	0x29ecc6f0	0x5ede901a
+-	0xda8399b1	0x31c05d6b	0xe1956aff	0x59ed7c3d
+-	0x60832637	0x9bcb7cac	0x63c530d1	0x14c677de
+-	0x9225ed18	0x065327c9	0xd1ff6a0e	0x5516517e
+-	0x53c6f5c2	0xed5983cf	0xaa1d18b9	0xbe300d7f
+-	0xadc525a7	0x07ea81b6	0xfc517a09	0x4ead3f86
+-	0x45435f41	0x2efa58df	0x02348ebc	0x30ed6783
+-	0x190b4fb9	0x85c55d6e	0xc9ed8896	0x416ee113
+-	0x9b3536d9	0x30577cc0	0xbc4b88c8	0xcda59612
+-	0xdfe2bd89	0xd60cde71	0x98843881	0xcc1f32f2
+-	0x18b3f643	0x671a14ca	0xd6482a47	0xac6a7d38
+-	0x1897da16	0x91b6fcb3	0xf199bb35	0xd38c00ba
+-	0xa8c946b6	0x52a1ad37	0xd38ed2d4	0xa1d6f81d
+-	0x5af6865b	0xebdb858f	0xb844b110	0x53201ea2
+-	0x08870945	0x10c869de	0x19849613	0xdb35d3ed
+-	0xd68ebd6e	0x1056fd48	0xf1a0e305	0xe3982ebd
+-	0x6f7cc391	0x5956374a	0xf414a5a2	0x325119ab
+-	0x99ee1f96	0x6f044bd9	0x8374805b	0xb55c366c
+-	0xa2c77051	0x68f199e5	0xd36a9714	0x878f847b
+-	0xec0394ae	0x86d0584b	0xf4df66b9	0x451cd039
+-	0xf4de06ae	0x35dd0554	0x818a342f	0xeefdbfc9
+-	0x5b4e9edd	0x22d9313a	0x3b710d60	0x6deaeb4c
+-	0xa9e26512	0x98d31867	0x3c2c2d61	0x7eb5ce41
+-	0x40890db6	0x7a3aa660	0x3ef4f306	0x7322881f
+-	0x49dac4d5	0x96efe685	0x27bb7f49	0xbb955283
+-	0x79c5f2b7	0xff599c28	0x28ee7f5e	0x9f324b73
+-	0x45edb7cf	0x39a8b79c	0xd0919c6e	0xe149b29d
+-	0x62f5f82e	0xebcfa23e	0xd4d68937	0x54270090
+-	0x958af0d4	0xa1e4e799	0xaf68ac19	0x82a84f4e
+-	0x50f67b84	0xd5e59629	0xf5fdf24c	0xab1d63c5
+-	0x30835807	0x431fce5f	0xe5f96f4d	0x3f6b4802
+-	0x14010be8	0xdca45ae5	0xc82709af	0xff76ce2c
+-	0x8b222c22	0x73a2d948	0xa8d59cea	0x8c31849e
+-	0x469c2e5f	0x3777ee84	0x5fdfa5da	0x02ef9bb2
+-	0x792d3194	0xbed63f21	0x0b6dc5f1	0xc9d7fe08
+-	0x6df7883d	0x366566cf	0xef772769	0x37826465
+-	0x1cdc3086	0xa69ff7b6	0x235012ea	0x292f7e75
+-	0x30bdd0fd	0xffdc9df1	0x95c6d570	0xec206204
+-	0xc6cd42cb	0xc0d6dfd9	0xb7a16b71	0x17fa527e
+-	0x295f2c79	0x990f9820	0x8b8f447d	0x193f9ad1
+-	0xebddb2af	0x5dd532eb	0xf1bbd8e8	0x3444a3f4
+-	0x18ccce93	0x05edeb4f	0xc4a6b935	0xba37aab0
+-	0x96076ba4	0x250dc2f7	0xc4093548	0x030e777d
+-	0x7ea40933	0x8da7b1dd	0x59c0b79f	0x807d437c
+-	0xf5233ddf	0x54c1983f	0xfc18771b	0xe74b85f0
+-	0xdbd725b5	0x70cdd153	0x4ffe300c	0xfda4bdae
+-	0xf4ac75d2	0x91c4e15a	0x34d92b97	0x16356a79
+-	>;
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/Makefile u-boot/arch/x86/dts/Makefile
+--- u-boot-2015.01-rc3/arch/x86/dts/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/dts/Makefile	2015-01-01 17:34:32.253503252 +0100
+@@ -1,6 +1,7 @@
+ dtb-y += link.dtb \
+ 	chromebook_link.dtb \
+-	alex.dtb
++	alex.dtb \
++	crownbay.dtb
+ 
+ targets += $(dtb-y)
+ 
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/microcode/m0220661105_cv.dtsi u-boot/arch/x86/dts/microcode/m0220661105_cv.dtsi
+--- u-boot-2015.01-rc3/arch/x86/dts/microcode/m0220661105_cv.dtsi	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/dts/microcode/m0220661105_cv.dtsi	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,368 @@
++/*
++ * Copyright (c) <1995-2014>, Intel Corporation.
++ * All rights reserved.
++ * Redistribution. Redistribution and use in binary form, without modification, are
++ * permitted provided that the following conditions are met:
++ *	.Redistributions must reproduce the above copyright notice and the following
++ * disclaimer in the documentation and/or other materials provided with the
++ * distribution.
++ *	.Neither the name of Intel Corporation nor the names of its suppliers may be used
++ * to endorse or promote products derived from this software without specific prior
++ * written permission.
++ *	.No reverse engineering, decompilation, or disassembly of this software is
++ * permitted.
++ *	."Binary form" includes any format commonly used for electronic conveyance
++ * which is a reversible, bit-exact translation of binary representation to ASCII or
++ * ISO text, for example, "uuencode."
++ * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
++ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
++ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
++ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
++ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ---
++ * This is a device tree fragment. Use #include to add these properties to a
++ * node.
++ *
++ * Date: Sat Sep 13 22:51:38 CST 2014
++ */
++
++compatible = "intel,microcode";
++intel,header-version = <1>;
++intel,update-revision = <0x105>;
++intel,date-code = <0x7182011>;
++intel,processor-signature = <0x20661>;
++intel,checksum = <0x52558795>;
++intel,loader-revision = <1>;
++intel,processor-flags = <0x2>;
++
++/* The first 48-bytes are the public header which repeats the above data */
++data = <
++	0x01000000	0x05010000	0x11201807	0x61060200
++	0x95875552	0x01000000	0x02000000	0xd0130000
++	0x00140000	0x00000000	0x00000000	0x00000000
++	0x00000000	0xa1000000	0x01000200	0x05010000
++	0x19000000	0x00010500	0x15071120	0x01040000
++	0x01000000	0x61060200	0x00000000	0x00000000
++	0x00000000	0x00000000	0x00000000	0x00000000
++	0x00000000	0x00000000	0x00000000	0x00000000
++	0x00000000	0x00000000	0x00000000	0x00000000
++	0x9557a557	0x7d7a0fe3	0x8e2fbe53	0x0db9e346
++	0xd35c00d6	0x21bb34b7	0x662b6406	0xa0425035
++	0x3d028208	0xcb843695	0xee06be0a	0x9817efa7
++	0xb86c0d16	0x45f70c93	0x79fdc3af	0xd5f30da7
++	0x460f62b0	0x238a0470	0xf0ec95bf	0x97b9c176
++	0x6d612851	0x69b9b4b6	0x1df769cc	0xe11674df
++	0x1b579adf	0xc8bcc050	0xcdb3e285	0x327592c1
++	0xbeb6047a	0x977f6be5	0xc4854052	0x27f38b66
++	0x4ca5eab3	0xf806decc	0x2be4b409	0x460a3b03
++	0xde2f6e0f	0x53ce08b3	0x3ef0ef93	0x4e013088
++	0x226f8a5c	0x57f7d291	0x8d640bf7	0x8a998907
++	0x40464dd8	0x804ef3e5	0x647e35f3	0xeabee2d1
++	0x3a5ce9c7	0x4d7ee530	0x564321ec	0x9e85107e
++	0xd595581d	0xcbf6efde	0xed3010ed	0x3d607e82
++	0xe32d4b6b	0xd06fec83	0xf39240a6	0xe487988d
++	0xddbefcbe	0xefaf1121	0x96bf9acb	0xacce795c
++	0x7fa5f89b	0xbe440e5d	0xb6d3a3dc	0xcad17290
++	0x503ae748	0x04c80b8d	0xd394ea6a	0x3e4072c3
++	0x11000000	0x0b0ae65d	0xc6c53cbd	0xd52a6c2d
++	0x84cc192f	0x89498e7d	0x89270686	0xe68105e0
++	0x4073a570	0xd3338d8e	0x51193152	0x7266182f
++	0x980553fa	0x51b89c90	0xd13b6151	0xe6e40a91
++	0x0ab997d8	0x2d0a443b	0x9d3d566d	0x820402d1
++	0xdbe79fcc	0x7c5e0b45	0xaf94216d	0xbf717950
++	0x520b3dd4	0x566a3396	0x0b6f794f	0xc5dfeda5
++	0x71ba0f02	0x4839a5ed	0x39a4e4a6	0xe567c652
++	0x0e044997	0x84a0effd	0x09c67178	0x89a815c8
++	0xac821555	0xd6719303	0x582b964e	0xfe3a53f6
++	0x241b9b8b	0xc6e65457	0x623a4e0a	0x590d7d03
++	0xe50e7ce1	0x4bca4700	0xf24f5eff	0x1f1b20d9
++	0x77e3227e	0x699b5e5d	0x9aa5f621	0xff08bba0
++	0xf17ce716	0x0f5336f5	0xbce055a7	0x8cea9dac
++	0x8e09d26c	0x66c3ddf0	0xbec71660	0x75248cd2
++	0x29afcf8d	0xa5ade5ce	0xf68bace5	0x63b513cd
++	0x4736a842	0x4dbf80df	0x4e85fbdf	0x4dce3d56
++	0xf2150fdc	0xc4232709	0xffdc3e3a	0x92b72a3d
++	0x9ffce715	0x682959d1	0x091ba33c	0x0f1dc729
++	0x2f29a924	0x1df72429	0x19b0365d	0x2d5a3cd8
++	0x20617351	0x109074f9	0xf232874a	0x40d79569
++	0x97dbe4c6	0xa3b66845	0xa04d2faa	0x6dce9a96
++	0xd4963c67	0xd4516f76	0x64a0b04d	0x0b87ddfe
++	0xd8a5305d	0x717ecf67	0x77189035	0x40542ed4
++	0x5a180ff1	0xb2042e2c	0x6639819b	0x0f0756c3
++	0xf939bd70	0x25efe0d6	0x3eb65ae9	0x39a057d2
++	0xb2595655	0xf808b4fd	0xe22d0593	0x76256500
++	0x0eeee6ee	0x6895d1cf	0x9fc117a7	0xd19e5f15
++	0xf677f085	0x1ecdb30d	0x704d0975	0x9099f42e
++	0x421be0b2	0xd02548bd	0x3a16e675	0x7d8b051d
++	0x9d24480f	0xbc006432	0x184da9ec	0xbad7abef
++	0x299f58aa	0xc1a249fa	0x8d9d31f3	0xe73cda17
++	0xf41ac993	0x7b88d3bb	0xf349c676	0xb8341361
++	0x1b69bc01	0x98e0bfd2	0xf31db8d9	0xeb49b275
++	0xabc40133	0xfb7d0701	0xcd5ff353	0x4eaceb8d
++	0x67aac555	0x6d81693b	0xe81c555d	0x5d7f3688
++	0xd4347083	0xcd861b1d	0xd332f2cb	0x43130028
++	0x7f1a1c51	0xe2ce3af2	0xdff5076e	0x6ef21237
++	0xf65fc8c4	0xbd28ff14	0xd70f49a3	0x4f559249
++	0xd6fe7530	0x1fe89b4a	0xc1cc8975	0x2fd705c5
++	0xf2993d77	0x60f2e3da	0xe3ca3c44	0xbd0f70b1
++	0x0d333d10	0xa29a6aa1	0x43b5a6d4	0x30d15a08
++	0x6df9564a	0xea09045d	0x54ca3f5a	0xfbcfa037
++	0x6dd64d1b	0xa4a8995c	0x1f4298f0	0x3f4d9a86
++	0x924ee146	0xc2e3f464	0xc247747f	0x8bf5c7d7
++	0xf8f0b05d	0xf65a115f	0x4b1ae4e5	0xe131e187
++	0xfaf713c1	0x5ff88660	0xcd4916b0	0x448028e0
++	0x140711ca	0xffe77575	0x8b7740bd	0x82b6ed95
++	0xd94d9647	0x2623c011	0xd54fba11	0x30a7050b
++	0x28fe4069	0x70b8bf7d	0xf786eb6d	0xe39db734
++	0xa3290669	0x8747e1d6	0x35804a42	0x1c26ed60
++	0x30a8880f	0x8170a277	0xa1d97657	0x6ebcb3ed
++	0x3bb6ce89	0xff808c1b	0xc919fd1e	0x911d8b14
++	0xcbf41a24	0x82abc738	0xfb5e988e	0x328aa123
++	0xf19146e3	0x587baa80	0xd105e811	0x83b09389
++	0xa29fc554	0xe3831a28	0x183f8de7	0x4ef5656e
++	0xcc940baf	0x938bf4b4	0x90627bae	0x14fc3cdb
++	0x75e45681	0xf912c1b3	0x7a5b8a0f	0x3b970524
++	0x6a74d34a	0xb3da9fe6	0x847a3bd8	0xfc4f7dd6
++	0x88fd7f3b	0xbcd74a15	0x3afed836	0x17e31cd0
++	0x5d866dcb	0x0ab69608	0xe334f0fb	0x7181d4a3
++	0x8dc87560	0xd9c94d6f	0x491c2c91	0xca295ed6
++	0xfb8dcd79	0xeb4d3f89	0xec581071	0x0457ebc6
++	0x6b63590b	0x9dde4b79	0x3dc0a0aa	0x41ec8a1e
++	0xfb2ab80e	0x07adc629	0xb8534a4f	0xd0d23901
++	0xcfd024da	0x47c4163a	0xc89d26bb	0xe5cac48c
++	0x17c7fbba	0xd992f42e	0x466f5e35	0xce48304e
++	0x394683c8	0xef6e6b7a	0xb9d1242d	0xb961debd
++	0x432a3dff	0xa4931ea7	0xd9f03907	0xc29e9ce6
++	0x4fccf4c9	0xbf234555	0x0b6a6771	0xb29f29ef
++	0x7edc4bfd	0x781dcf74	0x4ae31020	0x1ab72d9b
++	0x0ac457e2	0xf9291e09	0xd4084918	0xa540d999
++	0x223408d3	0x0bd039aa	0xaf0dd904	0x9cfd6a01
++	0x826c6bca	0x8e41a96d	0xa56fc4ee	0x6a7509fb
++	0x5cd2e6fc	0xb89aa158	0xb1e5d3f5	0x92ccd05e
++	0x995d5acb	0x5ed1dc08	0x75038dac	0x4377c835
++	0x265d66d8	0x3692096f	0xcd69ee59	0x310df351
++	0x087e3133	0xe89e2d58	0x137fd054	0x00f3562b
++	0x2ae304e5	0x9db0316d	0x6868cec6	0xb249ccec
++	0x9f602c90	0xd3715e7c	0x3fcc8a62	0xa1c1e065
++	0x5b4281d4	0x124dfd7e	0xe9d21462	0x77cbc940
++	0xf915f2a5	0x66df82fc	0xa8c67c56	0xac4d461b
++	0x836deb52	0x95fbb48d	0x3454b6bd	0xd87d7a64
++	0xe64d32b8	0xc44c2aa0	0x3e213c1f	0x4d31b94d
++	0x4640be5e	0xe127234b	0x9ca54856	0xac7d093f
++	0x03d0508b	0x30f5121d	0x6e347d91	0x47772312
++	0x318ea26e	0xad3f6902	0xb5598746	0x8be3b65b
++	0xc8bbd31d	0x24691564	0xee77d2e8	0x3581944e
++	0xeff8eed5	0xa29ea86c	0xc2597492	0x23c1c118
++	0x7810c079	0xb966ee47	0x823e9954	0x9e558c0a
++	0x74759c12	0x193c6b4e	0x7544597d	0x65c9bf8a
++	0x68f5e263	0x718c679b	0xc8dc50ba	0x5f5ab841
++	0xc3eaf579	0xc2072358	0x62481939	0xffe7e686
++	0x201f3215	0x1d88dc8e	0x28fb4002	0x40c56ec5
++	0xb7bcce00	0xd52f5042	0x84498e04	0xcc97fb7d
++	0x64035e93	0xcd3478a4	0x15d63309	0xa9e47b85
++	0xe835e45f	0x9de598b7	0x94f569f7	0x56689b0c
++	0x381f9173	0x708b3e52	0xc81f0649	0x12113041
++	0x4694aae2	0x69040fc0	0xe4ba7bf4	0xfadc5729
++	0xc168381f	0x1985f118	0xab0ca720	0xf0150799
++	0x42690e4a	0x71af3be9	0x9325f3b8	0x36575996
++	0x4dc1dca7	0x7e534c37	0x01830a21	0x221eef4f
++	0x18698322	0x57a80837	0x483ae2d8	0xef905b54
++	0xe01827de	0xae9a8ff1	0x0058be7b	0x052632ad
++	0x9df5c90b	0xb763fc7a	0x5535c95c	0x8eb5916a
++	0x75fde5cc	0x57d8eeab	0x0dcc35c6	0xbf11c88f
++	0x69142118	0x4f35c928	0x7966066c	0xb2d13b4b
++	0xdad06d34	0xb5d8f5c7	0xe0bb11e6	0x8a36325d
++	0xc1122d64	0xcf07a1a5	0xfe7ce9b1	0x176b624b
++	0x4de883fd	0x00a9024b	0x3d3f7271	0x5072895d
++	0x2634e158	0x2f3c9a35	0x95e374d1	0x65e66528
++	0x47766433	0x4cb805ff	0xbc8f0319	0x6d5055a5
++	0x4932e8c2	0xa93fbb4d	0x87f08bd9	0xf5e5706e
++	0x409af40e	0x017edf5c	0xc5394c71	0x6fb97b6d
++	0x7b5ddb6b	0x0256adfe	0x76d337e2	0xa3327113
++	0xfbb4cb29	0xea68ca27	0xa76a865e	0x8cdb2dd3
++	0x902642bd	0x16772269	0xb2341eaf	0x858fa943
++	0xb087fac9	0xd17de85b	0x3d9c248a	0x0bdcf2d0
++	0x874fc03c	0xf19f2591	0x190c06a9	0xc6b5c3ea
++	0x472b6245	0xdb9f8201	0x46d27a0d	0x52218ffe
++	0xece78c44	0x3ef6e38a	0xfcf19b65	0x536c840c
++	0x86d363e8	0xaa852826	0xde17e3ec	0xa9c3b45b
++	0xd322302a	0x48f03728	0x2f60d01a	0x3b356752
++	0x8a869fd4	0x055d04f4	0x765074fb	0xb0b5c2d1
++	0x865ad360	0x0cb6c6e8	0x5de9cf99	0x863938d3
++	0xd4d9aeea	0x0babfa86	0x172cfb57	0x972d8f4f
++	0xe9aeeb95	0x6acbe297	0xf2459e42	0x415fdd12
++	0x84b2e67b	0x47d2d466	0x44bc85a4	0x1a55b957
++	0xe4d01142	0xbf4ea387	0x5651e1a2	0x19124703
++	0x8aaed1b2	0x841f3ecd	0xc6d6cc4f	0x1f2d8565
++	0xba08e74a	0x68e5ecf4	0x07af5ef4	0xdd5a43a9
++	0x6086c705	0x37ced045	0x0fb05ca6	0x35f39f3b
++	0xda1ecbef	0x1daf6d76	0x5481d7ed	0xc51e8385
++	0xa705e11e	0x127d2a7f	0x654d4710	0x1a34370e
++	0xf8496ea4	0x4392b6ec	0x2f209933	0x9c5ab017
++	0xa4f7b837	0x33e0a7d0	0x98fb0635	0xdefc042a
++	0xc7a1f6b5	0x47107766	0xd06acfba	0xb8ac2a93
++	0xe21cca44	0xf0150492	0xd4de2e01	0xe0d6e9a5
++	0xa758b5df	0x2e1c31c0	0xc4794495	0x3d9cc157
++	0xf94aa4f7	0xc2325855	0xcf9ddd12	0xaa70e611
++	0x2b2404b8	0x75d87f38	0xa2a6f772	0x61abfa04
++	0x23b61fb0	0x87f4067f	0x355abf99	0x2c4e6c48
++	0x2dc8a3b2	0x119b08b5	0x3f1f6d09	0x374372f0
++	0x24d79d32	0xef2b58be	0x461ab91c	0x1d31267e
++	0x8b1b2c7e	0x27a4f103	0x1686c7c3	0x55af0d87
++	0x61c2503b	0x9ffcca7f	0xc3cbdd07	0xd49a4f3c
++	0x9ddc2ac9	0x335e1b2a	0xd8dcfc08	0x6e83f11c
++	0x53de9e30	0x7b774670	0x15a97571	0x1ecacf66
++	0x26581520	0xeee3496b	0x1fdf8174	0x4ddd3c61
++	0xaa504fc2	0x0b09792e	0x9b81d1c7	0x10765c95
++	0xd3e7b9d1	0xefdb38f9	0x4c44d38e	0xaaf8fd08
++	0xceb22e7c	0x5ac74242	0x6baee02d	0x5c7eaa5b
++	0x27265dca	0x614c3b5e	0x2994874d	0x486d48a3
++	0x5945c4f9	0xe465f343	0x934e55de	0x633199a2
++	0x147222cc	0x9bbb0c16	0x6a7e7ef1	0xb7bce9b5
++	0x13413d18	0x628231af	0x0fd2d58c	0x4cbafba0
++	0xa930fae6	0x91733823	0xe06f99c3	0xda3b57b7
++	0x04b8a9dd	0x53451e33	0x11fde5fd	0x0e35bcb8
++	0x3a5799d4	0x3893f9c0	0x6b9d0e1d	0xf8d948ce
++	0xa33a6628	0x7d09792d	0xd74b3719	0x0afb4de0
++	0xfaa5a685	0xecf7f8ac	0xcf34b855	0x89453b4d
++	0x12f028c3	0x45edc3fd	0x792c43fc	0x2b054962
++	0xb8799a92	0x0ab38d61	0xa6c6a76d	0x7670cdbd
++	0xf878b511	0x9a3474ba	0x478673f0	0x7398bba8
++	0x4fa10ff5	0xf0a1931c	0xd5938e03	0xe9a23c28
++	0x7bea2a5b	0xf7a8db22	0xb94ae0e3	0x2abe6385
++	0x0ef2cc36	0x6b997544	0x1e8cc4f1	0x69a5b182
++	0x54f9b7c7	0x8fe56cba	0xc7c12fcc	0x8d689865
++	0x2d6ef011	0xc6a1b740	0x66af0a76	0x76018cdd
++	0x30661377	0xcf1fcf93	0x08046423	0xdf9371c8
++	0x1795ec3e	0xf5ea09c6	0xe462de69	0xd7da78a1
++	0xd8bda1eb	0x1179f53a	0x2b394767	0x3ba153a7
++	0xf9c85bd7	0x5700c827	0x8478ac99	0x080a2f52
++	0xdd1c18f1	0x579cea67	0x345c56ce	0x4563f16a
++	0xfa1a5b74	0x0b6e233e	0xadc7bd9a	0xbee6d2f0
++	0xa249f3ef	0xcdea9b77	0xeaaed82e	0xcc4448a7
++	0x34f7cafb	0x7621bb44	0x4965b0eb	0xe6d6b8bf
++	0x3c683b25	0x33bcb5fe	0x3f376249	0x5b40dc67
++	0x658bf6aa	0x7f0c5d0d	0x61514591	0xeb3bb83f
++	0xc2e208dd	0xe82f08f2	0x6ef75ae5	0x9c11bc0d
++	0x289c0553	0x1578ce5d	0xb7f05c0e	0x818c5ebd
++	0xe566ec9b	0xc6995b3f	0x0c02aac3	0x2b4264b3
++	0xf9cad304	0x5b0479fb	0xf8ce8d6f	0xb7d80d8b
++	0x41a0d223	0x71ec8a7a	0xc9d74d41	0x245c5988
++	0xf607fc59	0xf1c7b6ab	0x142ef712	0xbf607800
++	0x281e5911	0xad9a3e63	0x87b59384	0x7ebdc04c
++	0x6f47867b	0xb6a304ac	0x289f65e7	0x335fc866
++	0x77eb11b3	0xb70c25b2	0x70b43d52	0x684d46c0
++	0x0940459b	0xde739ede	0x0b438a29	0xb713e77e
++	0x71f539b7	0x8b2f0f7b	0x8d8ab95d	0x42cde8c9
++	0x08c259d1	0x021eda69	0x2af81ddc	0xc7d13028
++	0x05abfa20	0x6a61008b	0xfc62557f	0xd6d731b2
++	0xb080aca3	0x6acae4a3	0xab33d2bc	0x7983c177
++	0xdf0c357d	0xb8dcb956	0x9c214460	0xfeb75d75
++	0x9b3d468b	0xd2c3106c	0xb1bd118e	0xf26df6a8
++	0x11b9c4d2	0x031357f9	0xf7af8a12	0x70fef26c
++	0xe5d8b8d5	0xf6746fd8	0xd6cc3266	0x4158e59f
++	0xa38fbfcb	0x01c61ff6	0x44c7c4e6	0xf26db3aa
++	0x46bb6d84	0x0a794535	0x1d5eab72	0x42345de7
++	0x0c7e6d47	0x8bacc223	0xb7334b8d	0x3d9d951b
++	0x18f4afc4	0x9c0cb708	0x53b71b82	0x603e8350
++	0x6f2df978	0x0c6f3f0f	0x661ebca9	0x30788bd0
++	0x982959c0	0x50aa1351	0x672297c1	0xa490a756
++	0x21c9e911	0x977e172e	0x0446db50	0x49b711c1
++	0xbc6d54c7	0x0fe0adb4	0xc4ec0fe4	0xae6d09b6
++	0x316cfa53	0xba68cc8b	0x104bdbe9	0xc31639a3
++	0x812a97fb	0xa1c6884b	0xc884d473	0xe3057c15
++	0x5ee879a3	0x5abe8262	0xb906bbde	0xfd98fcbd
++	0x6ae15c96	0x44a17e0e	0x28acfa15	0xb345122c
++	0x6ddc4244	0x005eb369	0x22d038bc	0x0d226e4f
++	0x64c7ed6c	0x7964b8d9	0xbc5d668d	0x99155e56
++	0x9979151c	0x65312a00	0x0271d338	0x64867293
++	0xed0d26fb	0xe69c5f02	0x93fd6871	0xf5702656
++	0x4fad1c2b	0x20f8c272	0x438b964a	0x87ff3fa2
++	0x6706537a	0x437b5709	0x6fb797dd	0x85679fab
++	0x00da6b51	0xeecc5540	0x2998791c	0xc36d40ef
++	0xb545e334	0x9ace5e06	0x8a9e6c54	0xc341d0cd
++	0x1478a2d4	0xb81413bd	0x80601f72	0xa1b250b9
++	0x1cb7f5ce	0xefad630c	0x32325fcc	0x29e3474d
++	0x6a7ae043	0x879ee630	0xdc1e8a55	0x7ae794a8
++	0x4ee38039	0x2ff4947a	0x53bb84b1	0x8f0b077d
++	0xaa4c543b	0x9aa88443	0xeb31a017	0xf3485983
++	0xe53b855c	0x6e17aec6	0x726458a6	0x5acf4345
++	0xa1b95c5a	0x30668c67	0x47fb5dc7	0x8aafbff4
++	0x4b94ef01	0x07bd6231	0x544afcf3	0xfdffca2f
++	0xce847471	0xe90abc6e	0xf05e3cc1	0xf602a9c8
++	0x8f104b51	0x1ae3da07	0xd07dfc04	0x561d9373
++	0x6f6cc833	0xac982489	0x3c0f8afd	0xfab974d0
++	0x397e135e	0x8edb3eb4	0x452b9509	0x3972829d
++	0x639e3981	0x1c758ec1	0x11428fa5	0xe8308fa7
++	0x571d71b9	0x94e40c2b	0x1aaaa397	0xce9283ae
++	0x599bbb93	0x51c04bf7	0x556bc74f	0xf6e6e799
++	0xc34191e0	0x5f06bce6	0x9f63ecd1	0x54437905
++	0xf8f9bd50	0xde82cbf6	0xe11a9949	0x9d312bfa
++	0xe712e3db	0xb57eabc9	0x57682068	0xc91c2e3c
++	0x681e4fbd	0x0ecd3452	0xcc893248	0xf13f0600
++	0x9a8a9194	0xb4c1cd29	0xd504d8f2	0xee6c5b8a
++	0x211c9958	0x7a4f9c30	0x32775708	0xda97bf03
++	0xf7035e57	0xbe77d547	0x37accd1e	0x6c537775
++	0x8d63b752	0x7fec4a3c	0x94211d9e	0x60bfeb2a
++	0xebd47130	0x747d52fc	0x8434f487	0xac9091cc
++	0x8f8b228f	0xb77f96a1	0xc21fede9	0xa9e2678a
++	0xbc815194	0x54d677ac	0x66c11faf	0xfb666595
++	0x01e5e973	0x5c990d0c	0xf2cea425	0x5b516ff8
++	0x8c932784	0xd18feb32	0xb5acd3d3	0x1703b89a
++	0x34fb512c	0x0ac83386	0xd58c5728	0x5c018ed6
++	0xbe0908a0	0xd490b0e9	0x0ec94527	0x2f281499
++	0x471df723	0x03eddc08	0x9b99d975	0x11535b70
++	0x5802288c	0xb3512d42	0x415a9c0d	0x52dbd146
++	0x8b0c59bf	0xd8160cc7	0xe37dee6e	0xfd5211cc
++	0x5635ff4d	0x8d783398	0xc11f5d62	0x54ca73b4
++	0xc3ebdf96	0x835e7883	0x9cd03137	0xe4b4f709
++	0xdbde6d86	0x2b562b2d	0xfecc0df5	0x172a5ec2
++	0x568b52b9	0xf542957c	0xd738b325	0x49c49aaf
++	0x6eb4c9ad	0x363f4978	0xac4b0cb3	0x4ec8dca8
++	0x7a2ec2ba	0x10ff39bc	0x8b8748d5	0x6a86e67b
++	0x0d81e2b6	0xf4bde138	0x02249333	0xab0c7acf
++	0x4ce5e894	0x1656dad7	0x46c59329	0xa849fea0
++	0x3d0400be	0x6898c4f7	0xd866ff9a	0x84a5b170
++	0xc997009e	0x80524f6e	0xc80fb5dd	0x5bde0181
++	0x0bb0c8a8	0xe5a6b9e4	0xd4753f0a	0xda9bf0c6
++	0xd6dd041b	0x4c7338f0	0xa223bd71	0x23b58f4a
++	0xf6e127dc	0x1777033d	0x5b057a0f	0xe08af0bf
++	0x17c07032	0xbbc3f27f	0xac6dc98b	0x921e2f12
++	0xcf32236d	0x6cb700a8	0xa3b4e5cc	0xe9b65d73
++	0xca7d6f44	0x7b5917f6	0x7b80dd21	0x5ee87e45
++	0x86799f71	0x0667e036	0x8f97dcca	0xc4bfd5d9
++	0x90737eed	0x41b5a457	0xc6c96301	0xf8933e95
++	0xe51c2456	0x00c661f4	0x8a0e1aaa	0x92aa4181
++	0x1e3f8638	0xd481a14a	0xaf637189	0x91622fb3
++	0x4450865d	0x4202b431	0x5248342b	0x01ff713b
++	0xe33b5ec5	0x912d6856	0x10deb2ac	0x9072c180
++	0x24d792af	0xa39c5dfd	0xb4c94140	0xfeb32004
++	0xa174dae8	0x49da7dfc	0xa4db1090	0x7d2a998b
++	0xb7eba69b	0x9b824871	0x3557bd1d	0xd3a73d9b
++	0xf225310b	0xad1ffcf6	0x2d5f075b	0x592de6f4
++	0x69e438f4	0x4ed8cac4	0xa79c947f	0xb95f9590
++	0xb8ede5c9	0x0b1c9229	0x85a4b30e	0x65149920
++	0x433461a8	0x186fda4f	0xbaee7097	0xd3cac1bd
++	0x8bc32ca2	0x914f1512	0x9b619478	0x582a53c9
++	0x4e624a00	0x77e445ec	0x6f823159	0xa9c4766b
++	0x0dd6ad28	0xfabdadc5	0x704bfd95	0x08645056
++	0xe1939821	0x76650b62	0x8876941a	0xf812239f
++	0x2869ce13	0xa4d292c7	0xecba40fd	0x83d2fd8f
++	0xdd45ccc0	0x7c12b7cb	0xdc0a20bb	0x0d9be34d
++	0x4dd16a9d	0x25835446	0xb94d8c21	0x97ca8010
++	0xddd09324	0x95ffe31f	0xa86136c9	0x828ac571
++	0x9aa7fc00	0x382cc48c	0x015f7186	0xc3fd040d
++	0x505408e0	0x21cdc34c	0xbd266059	0x6e2f673e
++	0xe4523c1b	0x3ba56bb3	0x1c343938	0xabc0df54
++	0x8ba4f1e8	0xfbd4c592	0xb678c884	0xff3be2f1
++	0xca013570	0xfb0598df	0x3cb9cc1d	0xe3ba8ca3
++	0xc3d7ecee	0x0ae84a0b	0x0d70f0c3	0x963110ff
++	>;
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/microcode/m12206a7_00000029.dtsi u-boot/arch/x86/dts/microcode/m12206a7_00000029.dtsi
+--- u-boot-2015.01-rc3/arch/x86/dts/microcode/m12206a7_00000029.dtsi	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/dts/microcode/m12206a7_00000029.dtsi	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,686 @@
++/*
++ * Copyright (c) <1995-2014>, Intel Corporation.
++ * All rights reserved.
++ * Redistribution. Redistribution and use in binary form, without modification, are
++ * permitted provided that the following conditions are met:
++ *	.Redistributions must reproduce the above copyright notice and the following
++ * disclaimer in the documentation and/or other materials provided with the
++ * distribution.
++ *	.Neither the name of Intel Corporation nor the names of its suppliers may be used
++ * to endorse or promote products derived from this software without specific prior
++ * written permission.
++ *	.No reverse engineering, decompilation, or disassembly of this software is
++ * permitted.
++ *	."Binary form" includes any format commonly used for electronic conveyance
++ * which is a reversible, bit-exact translation of binary representation to ASCII or
++ * ISO text, for example, "uuencode."
++ * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
++ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
++ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
++ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
++ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ---
++ * This is a device tree fragment. Use #include to add these properties to a
++ * node.
++ */
++
++compatible = "intel,microcode";
++intel,header-version = <1>;
++intel,update-revision = <0x29>;
++intel,date-code = <0x6122013>;
++intel,processor-signature = <0x206a7>;
++intel,checksum = <0xc9c91df0>;
++intel,loader-revision = <1>;
++intel,processor-flags = <0x12>;
++
++/* The first 48-bytes are the public header which repeats the above data */
++data = <
++	0x01000000	0x29000000	0x13201206	0xa7060200
++	0xf01dc9c9	0x01000000	0x12000000	0xd0270000
++	0x00280000	0x00000000	0x00000000	0x00000000
++	0x00000000	0xa1000000	0x01000200	0x29000000
++	0x00000000	0x00000000	0x11061320	0xd1090000
++	0x01000000	0xa7060200	0x00000000	0x00000000
++	0x00000000	0x00000000	0x00000000	0x00000000
++	0x00000000	0xd1090000	0x00000000	0x00000000
++	0x00000000	0x00000000	0x00000000	0x00000000
++	0xfd2a2f68	0x82ac7ebb	0xa4916328	0x7480b81b
++	0xd329a777	0x25750339	0x9a8f7a9b	0xf1da9cb8
++	0xb1be7b1a	0x621d5a35	0x94b57e2e	0xa9def809
++	0xe4492a43	0x530252bf	0x1040fada	0x8a853a89
++	0xfb0e6e76	0x6d191ed9	0xefd28b83	0x946414e5
++	0x13f415d5	0x28487029	0xb69855e8	0x516cbedc
++	0xfabbea88	0x9f90e8a1	0x211793d8	0x54653835
++	0xa7789a08	0x754791d9	0x484764d4	0xdca45615
++	0xf64844f4	0xdbd754d0	0x7d2b0ff3	0xd023e25a
++	0xb048bbcb	0x83038b5c	0x57e17d17	0x735f1e9c
++	0x8982c22e	0x6c7b2ad7	0xb26e3b82	0x7121e035
++	0xe4ea8dba	0x68d4f406	0xaaafdb13	0xf119b472
++	0xb5853303	0x20698005	0xcf34604c	0xdc17d19b
++	0x042d6e97	0xf0300325	0xe1b55072	0xc2804918
++	0xd6d7a912	0xf908c81b	0x4f9979ae	0x0179f8c6
++	0x2f13e3c0	0xc5911467	0x39ad6c23	0x9c9d8837
++	0xf3c3f767	0xe56b4a96	0xdad7cebc	0x6eaaee57
++	0x2215ca7b	0x4cee4f65	0xd9a51c2a	0xf33c80a1
++	0x11000000	0x0b468bda	0x0b57c7cb	0x885fad4b
++	0x8a37307a	0x68cc7d5b	0xb6395b55	0x583626b8
++	0x21efe98d	0xa516cc42	0xf5b978b1	0x585d8a11
++	0xdd5f2ee4	0x17b1c7eb	0xb6f005ea	0x9ecc6ac6
++	0x82c0f1b2	0x25a114fb	0xa6086296	0x93da75f4
++	0x0695ff88	0xd413dd65	0xccf7609e	0xb7718aa8
++	0x334406dd	0x28de253f	0xfb43ca83	0xa4674656
++	0x7392e05f	0x9b062c62	0x17571892	0xb5811cbf
++	0x9d64666b	0xa01c1500	0x5893e418	0x07ba6ed1
++	0x0eebedd8	0x299a52bf	0xdfdb6191	0x4e846b26
++	0x298b7431	0x576f4479	0xf5317e04	0xc9492745
++	0x167c42e3	0x0c0cd705	0x82756ce5	0xe81ba860
++	0x536c357c	0xc27433fa	0x41c8078f	0x1ff779d0
++	0x73ddd76d	0xe606c66c	0xe0ad45bf	0xfebdc310
++	0xcb2aa836	0x39903a79	0xe53d5dc1	0x0cb6a1ff
++	0xe6091d08	0xcb2961d8	0xd38987ff	0x2bd624fd
++	0xfb4e484a	0x8c60efbb	0x0ed088b5	0x5a142b04
++	0xa737bab1	0x44da29a2	0xc046ecb1	0xe7ccefdc
++	0x81895d2d	0x41266fa8	0x52a5e25e	0xcfeac133
++	0x252b0737	0xec54b6c8	0xe1c9ebf6	0x25180c1a
++	0xea65b9e2	0x5e9ada96	0x08559e07	0x414fcece
++	0xdb4927f7	0xa229106d	0x6a7db273	0x8ac6a901
++	0x00a87e4d	0x14fd1e2a	0x63a5fa87	0x5ca223c5
++	0xc0c980c1	0x42c447ef	0x5b274187	0x75bd6279
++	0xdb44dae2	0x60856af1	0x777caf5f	0x298e810a
++	0x93f4f418	0x9e1ddf3f	0x6f589046	0x18ea149c
++	0x4a5ce4b0	0x529db285	0x3c2dde59	0x1d680e51
++	0x3a62d819	0xdf4c01d2	0x432a8f06	0x70a37043
++	0x4a0d4baf	0x0d3395be	0xfce0391f	0x5228aac2
++	0x9dd9b00e	0x6149f393	0x6fee1d85	0x1d3628cb
++	0x107076de	0xd99fe940	0xa227eec2	0xc97d8119
++	0xcf2fa8b2	0x821dac93	0x518875f2	0xd18d1d47
++	0x3e27fdcb	0x47823f98	0x20d42c1e	0x9a58812b
++	0xe0987435	0x1426f12f	0x61d6f627	0x5c58d415
++	0xe5ca80de	0x9e11e526	0xbccc0f94	0xb49cec4d
++	0x357f947c	0xbef0e2f2	0x5b9b2596	0xddc87ff7
++	0x5f2705f8	0xa25f2be7	0xbb45a165	0xe49ef6d5
++	0xe76e250a	0x75584c7d	0x7900da7b	0xee0e3360
++	0x6988740c	0x4aa56944	0x2d485383	0xef45f5d5
++	0x0df4b0f7	0x48199182	0x5b33c21c	0x8f2483c1
++	0x8aae6c50	0xaf406ccb	0xb7522bda	0xeafb64de
++	0x9a9b1fd7	0x3ab46c34	0x0ec5f025	0xe5bc9668
++	0xdb108e78	0xd6152ac8	0xc382ec93	0x5abc2565
++	0x4f256030	0x856f6eb5	0xb589dc96	0x3de80942
++	0x49d20a05	0x8e3ac21b	0x0262ecc7	0x5f1bce89
++	0xec50198c	0x0115b078	0xf67d94e3	0x1cc3682b
++	0xfb2d4ab0	0x4d6ce252	0x1d7aace9	0xf7e99257
++	0xc1235e85	0x8129ee72	0xb6cfbb13	0x6b851ab5
++	0x430633d1	0xe9ed33e9	0xfe85a42a	0xb4583c0a
++	0x35a65f5e	0x5fb0bc81	0xe16db440	0x7d022cf2
++	0x8f832920	0x20ed9ad4	0x6a4ace8b	0xf4c85869
++	0xf17dd57b	0x277ae0d5	0xb5f59c50	0x35d099a5
++	0x9ce955ae	0xcb200000	0xcedc4073	0x2a2ba8b2
++	0xa1b53439	0x46ced775	0x59069604	0x6488f5d8
++	0x2bc0af55	0x643178a2	0x36f62be3	0x2606f0a1
++	0x3057cf8a	0xc28f4a3d	0x708e8020	0xb3fccf9a
++	0x29b79fa7	0x35622d93	0x85eb0e68	0x80fa3b59
++	0x143f340f	0x20e17166	0x169fe55d	0x698f3655
++	0x0bc8b45b	0xde3aaf6c	0xbd597266	0x75505401
++	0x44d0095d	0x4c00f346	0xfb9ef2c6	0xee70ef96
++	0xae807621	0xfbbe7490	0x9c0a283e	0x01a8058d
++	0x1be53568	0x0b8dc8a8	0x45afb745	0x3ee1ff58
++	0xe772e14e	0x3ca4e729	0x6973e751	0x764f244e
++	0xca8d1621	0x6c4fb15c	0xae972e6d	0x3d26c6d3
++	0x5ca8f450	0x6328d65c	0x2e7cd88c	0x87dddcc1
++	0xcbbdefc6	0x1ab8c0cc	0xd21e503a	0x20c11d27
++	0x2f0adc1d	0xc24240d2	0xc73aa069	0x99afc53e
++	0xcab27e40	0xbe107ccb	0x8ad5f0ae	0x9024c188
++	0xe02bb39d	0xdb784309	0xf91acb54	0x4d15b75d
++	0xd339c237	0x3b556619	0xf69f91f6	0xca6fcfd4
++	0xb5ddf471	0x0698490e	0xb0855c30	0xe2b34b13
++	0x3c979248	0xc0484a59	0xb4cf9f4f	0x7975f2ac
++	0x602259d3	0x89364c24	0x37f29913	0x0b4c88a0
++	0x23f0b663	0x309c13d2	0x80a3d12c	0x4c866e87
++	0xea7e29c0	0xbc33db6e	0x3c3af584	0x63da0de7
++	0x9bc6bf5f	0x3b948269	0x4d41b09b	0x5724dd20
++	0x4e16618b	0x5917781f	0x4bdec762	0x562cc3fd
++	0x50e59d92	0xb3edea05	0xa6ceaa68	0x60af473d
++	0x78a99aca	0xd60ba313	0xe502992c	0x0c25c2ba
++	0x476eebd4	0xe7e23958	0xc4ac2757	0x0d6695ec
++	0x7664b4f0	0xb87ed0a5	0xdcf23b2a	0x76d38802
++	0x21699284	0x87b80e7c	0xf0e34f45	0x4bb84bc8
++	0x0316744a	0x26de0ed4	0xb25ff5e3	0x31445bb1
++	0xaccc5b87	0x271b976a	0xcdf5663b	0xe142d271
++	0x1af28339	0x7d304ca4	0x11ee6243	0xdf70fbc3
++	0xb8d88f25	0x4c2d9626	0x8eb72c77	0xceee1817
++	0x4e1b35f7	0x6c261f67	0xa32a2801	0x67ace2af
++	0x7c87f8c1	0xca6f2505	0x982269dc	0x137080a9
++	0xe40fa78a	0x3897a66a	0xdc5d0ff7	0x58016e44
++	0x21bcc988	0xf2a4df15	0x9fb021d4	0xca59e882
++	0x3673d08e	0x7cf5d500	0xd41ab9df	0xc17b4a58
++	0x2cb85aa3	0x01103427	0x5a8fac5b	0x7ac856b2
++	0xb1532563	0x1b94b518	0xadea3bfa	0x597109a9
++	0xf28df608	0xc2bf64bf	0xf517bb53	0x61b7d5ad
++	0xa4a38e9d	0xa9fdc597	0xf990f2f1	0x00466640
++	0xcecd06a7	0x5eef09d3	0xb67a08ae	0xd780d8a0
++	0x07641a71	0x9dc9f7b9	0x5f0b5a44	0x94dfe40f
++	0x6db0cf7c	0x3fe72d11	0xb2443ea3	0xe051f336
++	0x4ec8a6a4	0x11201430	0xb44e2b28	0x5bd018b0
++	0x444ba2bf	0xa63031eb	0x147f9826	0x3fc56ac1
++	0xd3a75ad3	0xc3f71815	0x340bd72b	0x3e5a488d
++	0x0cd8fb05	0x17791534	0x68e7321c	0x1489c701
++	0xa39f2d71	0x7cbbd9f9	0x42cba365	0x024f7d9a
++	0x29ef2da1	0x1eb9c4e6	0xc8b24985	0x9c33412c
++	0x5fd3003d	0x7f0793b9	0x497b6ef4	0x3af648f2
++	0x22f4a1db	0xac8500c7	0x3b1a859a	0x57921c78
++	0xb0efd82e	0x8e60452d	0xd86ed85f	0xc1ae73d1
++	0x633d83dd	0x7dbee7f6	0x46ef5590	0x027f2d50
++	0x3c81bcf1	0x37a3940d	0xc92d0a8f	0x270cd02d
++	0xaeed9d1c	0xb6d76bcd	0xda27f251	0x1625a683
++	0xf2d1302d	0x3f95bc0e	0xdb4b36e0	0x96fe1e6e
++	0x1dcbca54	0x57d44867	0x14aada62	0xf20f5444
++	0x9ccf560e	0xb8d178af	0x9affe58e	0x8e3bd741
++	0x7dff29e9	0x3c1998e5	0x9909e1df	0x1bbbd50f
++	0xfda14fdb	0xb66fb65e	0xe646d5f3	0x71f41791
++	0xbca50c12	0x57c6d2a2	0x8f5c750f	0x48f87301
++	0x9103acac	0xef185c41	0x6dbe9524	0x3c040c16
++	0x211dc2ac	0xa61925bb	0x20bfb41a	0x98253e77
++	0x4d5ea3b8	0xc2b11b6d	0x7f072104	0x58340448
++	0x596e3090	0x72484d15	0xf5e5d16b	0xc1b9faca
++	0x5c786fdb	0xdcd97509	0x73d21aa9	0x2a90c7ae
++	0x396ed0b1	0xa23e63da	0xea20cb1b	0xb2bb359b
++	0xb5df6ff5	0xdbc470b4	0xa6fd8d97	0x9458f6d0
++	0x97434866	0x2c9521c4	0xc51f6ad2	0xa33fb3b5
++	0xb26915d7	0x3ef363da	0x9ff9f5c7	0xfa236e60
++	0xa12b879d	0x2f98bd3b	0x95282ca8	0x64f90513
++	0xc03d2962	0xb13b82f8	0xfdc2eb41	0xc39dcf3b
++	0x95a409af	0xbaba6e7e	0x0d028543	0xc5b9426b
++	0x35f5727b	0x8f3b9f8c	0x6e7b85d8	0x2cfa9b2e
++	0x2a7117cb	0xa41f3fe5	0xbe17ff18	0x0f4a8be4
++	0x20b9003a	0xebce04ff	0xd6f276d6	0x9fc66d07
++	0x83f40250	0x560eaffe	0x92be2ddd	0xdb0ff83e
++	0x424f0605	0xb3cf76a4	0x167725c5	0xe3b513e2
++	0xc31a1a72	0x9f7161a4	0x25707dd1	0xdb5f2a91
++	0x85db06af	0x78443bf6	0xebbd8e7d	0x7909e5fe
++	0x618237a6	0xe6dea70c	0xcd3299c2	0x7736d40a
++	0x044cda94	0x6cec190e	0xb9652583	0x51946c01
++	0xcba67203	0x0dae0f1d	0x6d0dff0d	0x85756bf7
++	0x1db9e08a	0x88977944	0xa6252c60	0x06ff1a07
++	0x1b8d319f	0x884f10eb	0xbdeb7feb	0xe1681bb9
++	0xb5f0cefc	0x5359534d	0x6de87cf9	0x94a78727
++	0x15c17557	0x398876df	0x2f85f258	0xa0284d4b
++	0x4879ca57	0xb5ab7844	0xb402fde8	0xd520cb53
++	0x8a601365	0x8853b510	0x1e0538f6	0x0135f899
++	0xa78c7bba	0xa33c8ccc	0x6cf0da00	0xa5f96757
++	0x94714373	0x79413ed2	0x27c7b9cd	0xda172153
++	0xeeeee91b	0x959d8437	0x660efcda	0x2a6ab94a
++	0x8913d65f	0x24246350	0xf6c85ab5	0xf6b696f7
++	0xd75840c8	0x046b7435	0xb55474fc	0xd8d8bab0
++	0x265e79e0	0x0dd030b3	0x826a182c	0x38f1121b
++	0xeb33b5cb	0xe3ca835b	0xe8850761	0x25955d7a
++	0xbb6b7fb4	0xbc02ca0f	0x1b03bd1f	0xdd1a59d6
++	0x5d48f10b	0x35e35688	0x1411d34a	0x6131c664
++	0xc1b8b277	0x1bc8afd3	0x886f0c09	0xc1b6b517
++	0x74ec9ecb	0xee2d43a5	0xbc0f122a	0xd1911c88
++	0xc7e39b2e	0xa60c39b0	0x942fce7e	0xc8c2a2b6
++	0x51978cc2	0xad8d9ed2	0xcc2b0c3d	0xf6aff0f7
++	0xbfb3920a	0xd25aa79c	0x67d87d44	0xf612df60
++	0xf06dbe9f	0xd4ab61da	0xd96c6b1b	0xb39ab4b7
++	0x3368a90d	0x39c8bd81	0xf4ba5ead	0x6fe656ad
++	0x93b946dc	0x2181219e	0x7b98805d	0x675af3fd
++	0x59760289	0x934b4803	0x4189f27d	0x9503a5fd
++	0x42aaa076	0x6b4bd024	0x86c826e9	0xe0370ff4
++	0x1bfdf980	0xc487f797	0xd4754c3b	0x1098b2e8
++	0x05753a1c	0x3833ede3	0x5f1065ec	0x40cb562e
++	0x8d4fc418	0x392290d2	0x622d2e29	0x55df1f46
++	0x4ae0893e	0x24ddf8a9	0x302a64dc	0xc93f7504
++	0xde8e1674	0x033acbcd	0xc9732a64	0x6f7a7da3
++	0x72b7c43a	0xb5110e6a	0x00865c19	0xaf5e00f7
++	0x0a80b55d	0x6e638c0c	0x3771d602	0xb4a95ae7
++	0x01ba3cff	0x42e350eb	0xedb1d897	0x82f0cfff
++	0x98e79055	0x6b0cc62e	0x8ce1735b	0x62645395
++	0xd99fc208	0x86ee3066	0xc8f13758	0x2378d582
++	0xad41c218	0xc3954b87	0x47acab9a	0x69126227
++	0xbf778357	0xc5a7b76c	0xb96894c4	0x89e2dd88
++	0x27cc53b7	0x2187116c	0xd397c13b	0x578a6686
++	0xe3e58b11	0xdc3e4d40	0x69f064f5	0xdfb64348
++	0x42291e77	0xacc21c46	0x5444d976	0x616bcdc1
++	0x01ffb3bd	0x5cb926e5	0xbd763a24	0xbf224c70
++	0xdeca1d57	0xded1cc56	0x9b6cbcd2	0xee6efaf4
++	0x44d634ff	0xf33334c6	0xd275d66b	0x6a1a4c9d
++	0xbd675ae0	0x6289d1c1	0x053aeaf0	0x8a170aa1
++	0xe12cfbb9	0x0ae15a94	0x1dab08f3	0x9a2657ab
++	0x8348417f	0x9572e6dc	0x9c69e518	0x5397dfa1
++	0xe46120cd	0xad4457fa	0x0106a79d	0x40b191be
++	0xbb64bccb	0x9dda8fb0	0xc74fe994	0x64ac0ef1
++	0x3a57986c	0x86e8dc78	0xbb055d88	0x7a1243da
++	0x585cafe1	0x8968ad92	0x5b73bf26	0xccf77edc
++	0x10ac1643	0x5738ba43	0x3d39ecee	0x57fd555b
++	0x36ee9d5b	0xec9115fb	0x4250e03f	0x9e4fd6a6
++	0xc547b01e	0x9c84f42a	0x37756616	0x217cb517
++	0x33da3c5e	0xa0a7ae6f	0x8ddb7b99	0xbd84ac35
++	0x644ec4e0	0xaa62a7ac	0x71795f77	0xd5f67163
++	0x77dcc227	0x59f09342	0xf6666ce4	0x1e164a0c
++	0x011e205b	0xc4a80a0c	0x7fd31f1d	0x05ccae4c
++	0x39b6abfb	0xf4b7ac82	0x39d38e89	0x14c1e7f3
++	0xdb3bb53b	0x02577ec5	0x7bc12087	0x65ccc2bd
++	0x72492c6e	0xa6ae0062	0x965946ea	0x58e5f31a
++	0xfdfd7770	0x052afb9c	0x889b8358	0x2dd65c3e
++	0x55418587	0x445af0e9	0x43fe6671	0xae45e776
++	0x2c25d02c	0x44805865	0xaa3a70c5	0x7dd55d11
++	0x3499f5d7	0xc12e4a51	0x9ef98a38	0x5462e98c
++	0x0f73c72f	0xd0481aa2	0x56bccd0e	0x64143a1a
++	0xa7913ef6	0x0ca932ae	0x3739ec96	0xac5d38d5
++	0xe9c8c754	0xd56e855b	0x950cadcc	0x91cb2e5e
++	0x6e170c11	0x1eb66637	0xf641b0ae	0x8ba43c21
++	0x3f43b8af	0x8f1596e7	0xb614d1ae	0xac99c14c
++	0xe7beddce	0x5757f98b	0xfec1cf89	0x19608162
++	0x96479a49	0x1f089d9e	0xc2e4ac47	0x1cdea563
++	0x027f57a7	0xc0ba57c6	0x6eb2faa1	0x8e85c333
++	0xc391dfd2	0xe2c0bcbf	0xc1f87d66	0xb597d958
++	0x3655d5a3	0x2d9adaaf	0x8efd0aa0	0x05d65caf
++	0xa28991d9	0x28b6d7cf	0xdcb48013	0x65e75783
++	0x8b8b77ed	0xa4b36df8	0xa8ccfb9d	0xd0a1734c
++	0x2dc97601	0x35d81082	0x2e6d26f8	0xf3baf2c5
++	0x416084dc	0xd8b84ad5	0xa06b9edb	0x45c2b0b6
++	0x553c973a	0xbbcda1bf	0xca154d25	0x7a781012
++	0x4864ea32	0x0784f663	0x27656507	0xb359d4dd
++	0x43d4c165	0x69b844c7	0x31b1b9e2	0x0f3420f8
++	0x3cd2e455	0x201920cb	0x93018659	0x5c4a08f0
++	0x3a0d094b	0x5448c1ed	0xc888d1a2	0x4826cb64
++	0x625da2c7	0x12110d40	0x5cd8e76b	0x26e09eb5
++	0x8c6aab45	0x6dd192c6	0x937f1252	0xc927efc5
++	0x4c5bf11c	0xdd62c6fa	0xeef59620	0xbffc2d5b
++	0xb90299f0	0xb24df71b	0x76656678	0x550b3228
++	0x01536098	0x4fbfe03c	0xa82d0c31	0x2eec9bb6
++	0x752e6720	0x26322556	0x5d94bd64	0xa2e1122a
++	0x25899986	0xb63d5cc2	0x9222b055	0xbf4f0bcf
++	0x3d182483	0xc7bb9999	0x97ffc8c1	0xa6500a8b
++	0xb8b97382	0x3f6f39b0	0xcaca9f6c	0x7b67941d
++	0x7875ea1e	0x3ff25c0d	0x4cff1a40	0xb5a351ef
++	0x556a59e5	0x011e995f	0x25a7a5e9	0xedc8707a
++	0x42b4ddfa	0xa51a3ddd	0x9c9f1d73	0xc8f24ef3
++	0xfcd73118	0x1a61c16f	0x1e2fa7c7	0x1f49826a
++	0xd8418fe9	0x726358a8	0x6a0857fa	0x6804ccc1
++	0x78a55fa0	0xc3e41419	0x60416b10	0x2afe46d8
++	0x0c0ba2f7	0xd3dfa8ca	0xfa474ea2	0x8e763446
++	0x1f664c64	0x6a8d06cf	0x1b891114	0xa27c1a28
++	0x98ddd324	0x26cc9fb8	0x544078da	0x03acbeee
++	0xc3f3b761	0x56797b83	0xf04ac5a1	0x8603b17f
++	0xb8989b96	0x28c7be17	0xb750b4a6	0x84b2f7f8
++	0x32138f9b	0x7661c86b	0xb7517518	0xf2a961c6
++	0x240a0100	0x100c5b96	0xa1931730	0x18513938
++	0xdf2baa73	0xd6b55cce	0xf89cab59	0x238c90c3
++	0x4799f50d	0x29cd7942	0x62677a47	0x7261f326
++	0x4ff7da96	0x294ba5e9	0xb6474251	0x96de1b44
++	0x9d84552f	0x1103468f	0xcfd063af	0x5d8a0b6c
++	0x172670ac	0xc1a9b97f	0x0a278773	0x08b48bb5
++	0x392b3563	0x8f65e926	0x4be71f10	0x7615e05e
++	0x98b0c931	0x50bf9779	0x5baa97aa	0xb6e26fe4
++	0x2c40971a	0xe5d739f0	0xa7e30500	0xc724895c
++	0xc7a3f44a	0x5b381b1b	0xa7a478c7	0x219f567c
++	0x42d7a960	0xaae6780f	0xa96c56d1	0xe3787bf4
++	0x743f3a5e	0x6b99c9e1	0x36cf72b0	0x784ab5c2
++	0x5113773d	0x625393af	0x62c4da61	0x05422921
++	0x339711f3	0x3ee04f5e	0xf3a778b9	0x55e1bcf7
++	0xe49e5a9f	0x5f0935f6	0xa13e17f5	0x3028d23b
++	0xac9a6fd9	0x14006013	0xbf1b3fb2	0xce785f7b
++	0x83942244	0xd299d59b	0xf8c0593b	0x71c74beb
++	0x7561a1f5	0xb133ace7	0x15d5d4c1	0x21c3bb29
++	0x6ab1c2c7	0xee20d3dd	0xcfd62c54	0xedf9a43e
++	0x0e23222c	0x5eef5bc2	0xe7426bd0	0x42db58e9
++	0x62ffe203	0xd63163c5	0x8dbbcb48	0x9e16d9c7
++	0xb6d51e39	0xbee5a6c4	0x5d0bd775	0xeded86db
++	0x9eb1454f	0x6217eb64	0xa4b76ae7	0xe3481698
++	0x6d576cec	0xe751f610	0x1473bd83	0x4aaead8c
++	0xff4a602b	0x01ed092b	0x310f16cb	0x2e199177
++	0x693a8ad1	0xf5e520d1	0x1713d604	0xfff1225c
++	0x644c81b8	0x1adf5032	0x79058d81	0x7aafda08
++	0x80b6c9df	0x6f927c46	0x307bcaa6	0x0a1aac12
++	0x7d20bdae	0xd0e9c9a7	0x4530bebc	0xf1dbac36
++	0xdee3e8a9	0xa96d2aca	0x291c6944	0x436cfac8
++	0x9dd501c3	0x696e0c6b	0xa85d7036	0xca1c1321
++	0xcb802235	0xae614fec	0x4f0cf745	0x08604468
++	0x93bd00f3	0xf39eb605	0x89a8f420	0x18a7f61a
++	0xa0aebc3b	0x723e6ba9	0xed00f2a0	0x231b43d5
++	0x37c81702	0x891ffeb9	0x122de4f5	0x90f16757
++	0x1eb06046	0x21d5cdd1	0x75fd0e6f	0x7d595ae9
++	0xeb8ed50e	0x7bfd8696	0x3b91f3e4	0xd629e74a
++	0x1650dfcd	0xda48163d	0x2f8f5aba	0xbc40ee60
++	0x5291b6b0	0xb059d788	0x1ed5f092	0x65b7a885
++	0x44503d18	0x3a2893c8	0xaf3dab25	0x8ee0a8e5
++	0xf82f0696	0xf4fe9322	0x863feff8	0x2cfee629
++	0xacd8bcbc	0xb3791232	0xdd694c06	0x2a606479
++	0xaed9bc38	0x49a126fd	0x2a9c7581	0xaf43095c
++	0xb97acc90	0xca7a25b6	0x06adceb3	0xc8bf7269
++	0x6eeb0c59	0xa953657b	0x8e175c3a	0x9facc87c
++	0x4c143d0b	0xb4467fe4	0x372b6cbf	0x2099b361
++	0xb8ac2cfe	0xb9a798d0	0x15b8b336	0xdab5d568
++	0xb53a4dda	0x00ce1ef7	0xefef7644	0x41823aa2
++	0xcb8d307d	0x3baf1baa	0x7124a219	0x8d2820df
++	0xf3b8cfed	0x95e55a1b	0x8199fa40	0x631042fc
++	0xf7886353	0x3592b875	0x3b516841	0xac7aa00a
++	0x3dbfec52	0x9b91e8d6	0x0a8ffce6	0xd11429db
++	0x92392bec	0xe194095b	0x253d7425	0x6b55919c
++	0x4c11de8c	0x10b46ae6	0x5902c153	0x9509ace0
++	0xbb65fc04	0x648a35e0	0xab728bec	0x738effb4
++	0x416f95fd	0xee30a0da	0xcbaf3cb4	0x312fdeda
++	0xcdb5aaf3	0xcc631b82	0xe3bf4d97	0x37e2a1b5
++	0x2920c6b2	0x0d995ad3	0x11af607c	0xcacf31d6
++	0x781496f2	0x9e478c0e	0xc4c14545	0x89ba2ab0
++	0xdb1a8262	0xbb924c65	0xad836a24	0x4374fbd6
++	0xd45a10df	0xd4158c0f	0xd4e88c1a	0xee8b8e23
++	0x3472ee5c	0xc0a0de0c	0xb1ba04dd	0x7be6532b
++	0x0101669b	0x2a56f032	0x12879eef	0xa600458f
++	0x20a96992	0xa2e7910d	0x13235ef1	0xb1185320
++	0x418ffba7	0xc0ba01af	0x27571c7a	0xde5b661f
++	0xdd359089	0x6ae76b8d	0x095784d0	0x400a29fd
++	0x5b3276cc	0x774c4e38	0x6a85e14f	0x37d8d1bd
++	0x2007cea4	0x3e6942be	0x1a49828d	0xea4d84ff
++	0x681b5a30	0xd8ff8440	0xac19844b	0x7553a6d0
++	0x389fb0a2	0x1b0526fc	0xa193b9e0	0xb9987cb7
++	0x6f14d980	0x0507f958	0xf6a1354f	0xcb9e49d8
++	0x5a4e1d3f	0x10d8c348	0xb77cf166	0x5097503d
++	0xf0e17ed5	0x72a2e029	0xddc756b8	0x0a0e30e8
++	0xf12c6bc7	0x809db2c5	0x243fee9c	0xd2b57957
++	0xc1b19244	0x8d59262c	0xff94c28e	0x2050edc2
++	0xa4806d15	0x02026bf6	0x2d95c9d1	0xeb336e65
++	0x84bcf6ac	0xe53b97b7	0x954eedc9	0xf22209fe
++	0xf4771bc0	0x1e405f04	0x1d0ec592	0xcd479333
++	0xdfeb3738	0x0ae23cb7	0x03d509c5	0x837a5e1a
++	0x634a4467	0x7ee22185	0x102f5326	0x5d002daf
++	0xea4e31ce	0x1d2be82e	0x5ebe1ad6	0x354259bd
++	0xdaed312d	0x1e598ea0	0xd6a2b9af	0x76eb9bbb
++	0x338645d3	0x4d3236f8	0x777011eb	0x0221d076
++	0x22dee347	0x1e35037e	0x2f34d4c5	0xdda03e2e
++	0xa541311d	0x3acf0087	0xb435b17c	0x08b8210e
++	0x7c77f156	0xe20025f2	0xea0e32a9	0xbf766fd1
++	0x8b6c4f43	0xf6ca80f1	0x07d1d342	0x272b865d
++	0x8261aed7	0xf3bbe9cf	0x5835370f	0xfaaf4623
++	0x8cb5a665	0xe6c92e5f	0x22ce69f6	0x61e16f89
++	0xf15ec311	0xbacaf7b4	0x1317e388	0xa1869c49
++	0x328da67f	0xd818a8fb	0x6f4c7613	0xcc13480c
++	0x06789788	0xa7b4e1a8	0x0d8fed7b	0x48308fe3
++	0xbe5ff9e2	0x7e7a74ee	0x4ffbb70c	0x551895c8
++	0x734ffc0e	0x82b8b8d6	0xdf710f9c	0xc3df529d
++	0xf175e377	0xcec6194f	0xc3443fb1	0x52655208
++	0x94be229e	0x3279939e	0x771647a1	0x34c9a15a
++	0xaae80baa	0x0b32ec13	0x6d59b440	0x50ddd10b
++	0x98c166cd	0xfd465f40	0x74eabbc2	0x6dcb95c0
++	0xddef6f85	0x54348377	0x905f31bd	0xbde86f48
++	0x1322356f	0x90f3d5f2	0x5d2d4de3	0x2d5253a5
++	0x729b8879	0x41839289	0x845f8061	0xf5ffcf8b
++	0xf25ec4d7	0x30570dda	0xcc69f64b	0xeb024bde
++	0xc847bf80	0xeb8c5624	0x4e4d28eb	0x43f6cc1e
++	0x8c201bfb	0x1475f9cc	0xde13b005	0x11fd9342
++	0x07617ac9	0x2fec6867	0x5b30a62e	0x5a8c91f7
++	0x47208b6f	0x680a22af	0x60fd0ebd	0x229ebe44
++	0x568c37d6	0xa3eb78b7	0x6f06f502	0x1b183db2
++	0xd48e4d35	0x4fb23b3d	0x57d7dc0b	0x3d34b427
++	0x0415552f	0x1bbe91d1	0x74e7ecf8	0xb1fdc30e
++	0x466a69f5	0xfddf86b3	0xfb61fd48	0xae250961
++	0x6a99bcec	0x2142c5c8	0x1c08d4ea	0xe8f849c2
++	0xa3cb1614	0x43ac8702	0x22b50659	0x92dc3644
++	0x7a40a305	0x4a1e0780	0xfb638be0	0xb0912795
++	0x522a688e	0x1133c55d	0x0544a27b	0x3c56a574
++	0x748502e1	0xaee58228	0x30ae0736	0x41a029ad
++	0xa1e3d0e1	0xa9b66582	0x6ec07231	0xda4dba0d
++	0x41db8fa0	0x731529eb	0x87f679d3	0x593d1579
++	0x10935a3c	0x793d7b44	0xac680a86	0x1d01ec27
++	0x6d669681	0xef056753	0x96aab271	0xae070e5f
++	0x3321dc26	0xa5ea33a2	0xf8f14406	0xdc755c9d
++	0x7f8e3210	0xc2fd90cd	0x34c102d7	0xe1c744a7
++	0xa79f623f	0x07507959	0x34d28c67	0x26cbff85
++	0xfa24075b	0x618dcdfc	0x64d52c6e	0xce650b7d
++	0xcc414394	0xadc52ceb	0x43667ed0	0xa04f518d
++	0xe52196a2	0xbcb7e578	0x2ed0486e	0x4d669b00
++	0xf765e153	0xd2f097df	0x4ef97542	0xfa31d688
++	0x1698d42e	0x3d828d65	0x222355aa	0xf2c37eb2
++	0x3da4052b	0x198577ae	0x819590ff	0x5ab919a5
++	0x673d5552	0xd2fa9d52	0xb711b72c	0xabd9c188
++	0xb73a4ce5	0x2d20447b	0x3d19d4c4	0x4bbe86d0
++	0xd205021c	0xe9875ec2	0x8dcb01f3	0x6e109fec
++	0x60a3a693	0x2fb6b975	0x0ed26de1	0x7487f920
++	0x83092880	0x4d5fcb5d	0x72b047d0	0xa256dcdd
++	0xfef28251	0x41e36ee6	0xd91e2c20	0x7698357b
++	0xb3684b1a	0x272311be	0x32860f75	0x44a6cc61
++	0x63e3f66f	0x5a1497b7	0xeddf5a57	0xcdd4577c
++	0x3cc63cd3	0xf7e72773	0x3fc9bb40	0x97ce4118
++	0x1438da68	0x7a32210b	0x2aa07598	0x04e858ca
++	0x850e0082	0x0b0f78d1	0xb178c391	0x9a2e231e
++	0xa8f3b67b	0x2a08ea99	0x340d101b	0x42973ffa
++	0x755ae5cf	0x201213c4	0x445e44f7	0x15a872c8
++	0x857b94f3	0x24c023ab	0xb203df2a	0xc4711de8
++	0xd1faaeea	0x1eb857b6	0x8c1b712b	0x11ad0f2a
++	0xc64cf474	0xff6c128c	0xff13eac3	0xc4952e8f
++	0xacdac9d1	0xb8c2f092	0x38d50a33	0xaeec4534
++	0xa661a7ee	0x4d19a2bd	0x0f2d95e4	0x9a221827
++	0xc9fe071f	0xe53486d7	0x1dc5426c	0x848eea4c
++	0x607f616b	0x41a301f6	0xeadc389c	0x1f109048
++	0x249f14da	0x2a20d362	0x7c93cd00	0x7ca633e8
++	0xe50fb5a4	0xace8f92f	0x49638c89	0x478b4371
++	0x60d70e8b	0x0bfb8bfb	0x6cac803d	0x702996e4
++	0x15a35d2c	0xd68a2d93	0xe025d5ee	0xd8ca8c86
++	0x295393d3	0xce1be3f8	0x0ee6bd15	0xd6735f38
++	0x311495e6	0x7eb8bc83	0xea53551f	0x4fa9a90d
++	0xe16a9ea0	0x651eb233	0x95f0afec	0xc687ed29
++	0x0cd3abc8	0x132bb8b4	0xd70dadd3	0x538e630a
++	0x98481e4c	0x0d7e6f1b	0x3986b2de	0xbe0924dd
++	0x1d14608e	0x189f553e	0x7a6b7786	0x48bae520
++	0xed56a3cf	0x795b4c6f	0x8670597a	0x40eb02ab
++	0xf9b0b287	0xec9f86c3	0xe9a8c3a1	0xe6860542
++	0x387ad930	0x8676e402	0x633f0709	0xd661d134
++	0x011c1396	0xabf1f3f5	0x3fd76128	0x7be75289
++	0xa6046e69	0xf3713680	0xa2ed30c5	0x893df28d
++	0x197b8543	0x9860bef6	0xf6930c5c	0x6c0c379b
++	0x0b0026e1	0x3ca86896	0xa7ea0bdc	0xca94413f
++	0x6cbe8d16	0xd3e4edf9	0xb06efcef	0x3a8934c6
++	0x00195592	0xa978bf0c	0x7435b0d1	0x3b17d97c
++	0x0438684e	0x576ced8e	0x648683fc	0x362a8a87
++	0x493fd86f	0x6bbe0476	0x16f74de4	0xbfeaaba8
++	0xe6b90728	0xdc252878	0xe0b72eac	0x0872f52c
++	0x2bab1521	0xa6c0d894	0x9f2b3726	0xd392e334
++	0x785f82ce	0x15bba4af	0xb55cd743	0x6e8e9cf8
++	0x047fd2e7	0x1fdfe424	0x8d4820e5	0xce7dd8c3
++	0x88c82282	0x31ef9a76	0x1881fc38	0x3932a9da
++	0x65bbfefb	0xe00f33b6	0xdd0754aa	0x1f596051
++	0x704dfd7b	0x2604be1b	0x08b6c4f5	0x3f244085
++	0xd89c65e3	0xcc4cdb71	0x143a2681	0x1bd3d004
++	0x009460ff	0x86e314a5	0xb1aff86f	0xaa2599df
++	0xbf68de69	0x355c8267	0x9588dbed	0xe47edd9b
++	0x266b2ddd	0x129b0b01	0x6e6622a6	0xb3ea4a00
++	0x802abd6b	0x7a268c1d	0x9f5a7b41	0x6f4aba0e
++	0xe279b988	0x660ef08f	0xf4207beb	0xfa0168f6
++	0x93266ea0	0xedfef092	0x302b5e5f	0x7278d2be
++	0x58a494ab	0x8f53a302	0xf5e766de	0x1ef717bf
++	0x45e2d6fd	0xf593b066	0xaea0f1e1	0x1bd1e027
++	0xf853ba21	0x1127c5c4	0x8aa43b18	0xf1fba0b8
++	0xe1cfb0b8	0xa9f9fef6	0x1320f1ab	0x5f7dfc74
++	0x30f11ab4	0xaf47a3cc	0x9c190830	0xac085edb
++	0x8b4db7c8	0x771ec065	0x6d5f3c3f	0xb8815437
++	0x20d3c99c	0x00823c74	0x24d63cae	0x7587e453
++	0x1a3fd67b	0xa5b361cd	0x789d168b	0x98a93943
++	0xd7505c0a	0xa923b38d	0x46097a4f	0x814e41dc
++	0x0f50f2de	0xbb548368	0xc48273d4	0xf27b6798
++	0x9a6b5231	0x68491e7b	0x3f482179	0x89ea3b35
++	0xa7525ffd	0xf8f1f616	0x07859572	0x738cb4b3
++	0x8937c6dd	0xf5988c71	0x4874905e	0x677a8c17
++	0xd58df987	0xc4210078	0xe6b1c480	0x7a91e14d
++	0xa1228a7a	0x09057467	0x6cd59ec7	0x6ba93248
++	0xb8e263cb	0xd3305730	0xaec36ee6	0xc773d0b5
++	0x2895f8ec	0x6c9f5fb5	0xd32a21a5	0xcea9d058
++	0xfa97282f	0x5559ceb4	0x5a0bf57c	0xf3cd99b5
++	0x2771f6c4	0xfcc9a35d	0x5143417e	0x7c6f9db7
++	0xb47cb7df	0xe7dde37b	0x70a07531	0xe25e06a2
++	0x3bbb7d30	0xaf41b085	0xe664f973	0xee2c7ab7
++	0xef8eb1b5	0xfba67f7d	0xd71568dc	0xbbff3339
++	0xdf49725d	0xbc0e7edc	0x5361e6d3	0xb0978c73
++	0x1320540a	0xa9843a06	0x34099c74	0x4bdddd23
++	0x18680496	0x44f9cc19	0x6de71a34	0xe4eae858
++	0x3349a819	0x28400571	0x10a55fe9	0x05672399
++	0xb376eadd	0xed4b1a35	0xe79d0a4f	0xca8d0601
++	0x78a7b066	0x8ea59a40	0x7be112a2	0xe99ea438
++	0x44bd9efa	0x6e5227a1	0x70325aef	0x777282e9
++	0xb579c189	0x4ee92bc9	0x0d0236dd	0xb57cf232
++	0xb815e184	0xd05823e4	0x0c9490b8	0x70a5fa56
++	0xdf0f178a	0x99d27374	0x1aba9e05	0x18378c3d
++	0x86991118	0x3a199a70	0x90b2a2cf	0x67a6923b
++	0x0975e5f2	0xf50fb0a3	0xbffbd67a	0xce6371e7
++	0x203564ef	0xb1d7a395	0x201cb1c4	0x30085e3c
++	0xfb2c66b4	0xf80ae969	0x1d407625	0x0bca1a0f
++	0xb62c078f	0x83efbf38	0xbd7b0a69	0x7d9bb66a
++	0x46b5c885	0xb256d753	0x0b5d008e	0x1756d5bf
++	0xa9ffdaf6	0x01231fcb	0x8c69e461	0xbb2ad661
++	0x29dee8f7	0xf1f23d56	0xd5e90ffa	0x48d9d93e
++	0x77b26e95	0x49c47953	0x7565da8e	0x41a6124a
++	0xfce69643	0x55f99554	0xa5501d6e	0x5738b726
++	0x4c989c96	0x93cbe27e	0x20ff3d38	0xf4787a09
++	0xfa3520e4	0x26b2dc11	0xb701c94b	0xcd8857ee
++	0xb4b07229	0x0bbcf1a7	0x3d31cd32	0x08ced413
++	0x3da04c1d	0x7bdf1787	0x344f510d	0x53a02e8e
++	0x7e295418	0xa5ed24b3	0x3a5a2c98	0x34947e44
++	0xb398bfcb	0x7c0ea498	0x18db3289	0xec646beb
++	0x2e8ed766	0x5aff9ee3	0x497dc7fa	0xa70c3be4
++	0xfc9306c4	0x729f532c	0xd87d61d0	0x635fadbd
++	0x1efb1234	0x66fdb543	0xf5b86d07	0x3a4836fd
++	0x9caf7dd3	0x8a9d9e5b	0x179529ac	0xa9a3fee8
++	0x4cfa4495	0x791b8b7a	0xc503fc2b	0x1e07d0e5
++	0x0561cfae	0xb5e7c403	0x0809744a	0xea84c654
++	0x23614fd6	0x23ae773f	0x545be2c5	0x3585b8b4
++	0xcad8b6ed	0x088a56c0	0x81054caf	0xecb13d9f
++	0x44bd49f7	0x90a3da4a	0xf4b04300	0x32a2b69f
++	0x44bed501	0x85cb54ef	0x85dde589	0xe410132b
++	0x1c2e41c7	0x3d28cc9b	0x4df948de	0xaa058c37
++	0xb82cf615	0xfa0574f8	0xd0391f5d	0xfb2b98b3
++	0x3ce5585d	0x80ca4d6a	0x4b138f75	0x721ccc65
++	0x496a3e37	0x4a8dd025	0x2d77b3db	0x65800ff3
++	0x1d2df03e	0xb4b12a59	0x4c6a5b9b	0x17413fda
++	0x4e938a09	0x7e3aa03a	0xf86cc8f3	0x972cd7b7
++	0x871849b1	0x0c0879d2	0xc7c652a9	0xe9531ae1
++	0x541142d9	0x4f731afa	0x9c43e538	0x866b695d
++	0x4a4c4076	0x1e8aa293	0x51bc1eaa	0x5f57d28a
++	0x142eb7f5	0x14096954	0xae0e9eb3	0xef732983
++	0x70187474	0x3569b88a	0xfd3a3c61	0x54f0e2d0
++	0x7afff032	0xa89cd23d	0x658114ec	0x434ccbc9
++	0xc25f33c7	0x1b6e9a7a	0xd97bd017	0x3b7489d7
++	0x67129c97	0x333ee180	0x04bf73ae	0x4731105f
++	0x09d589f9	0x7d5a67a3	0x3e8fcb8c	0x2090c536
++	0x14a623c0	0x21a247fb	0xe117bbe6	0xe98bbd1c
++	0x09e23674	0x02f09f22	0xba7f9f45	0xd18573b6
++	0xa6eb18fb	0xe01a7904	0xa8869f58	0x82ec81ee
++	0xf4549f1a	0xfa0f6085	0x1cf809e9	0xe603d078
++	0x13525306	0xd5611c7a	0x2c92b32b	0x5fdc0c0a
++	0x0b3aaced	0xa40059b7	0x27c42499	0xcc619db5
++	0x9f9b7841	0xfdca5eb2	0x2d3e833a	0x2830a6a0
++	0x4c81f3b0	0x3ec8a8bd	0x50b95605	0x33a9d515
++	0x7fe14795	0x4ff1d83d	0xef92fbfe	0x87f4faed
++	0x35d5fc69	0xd8764a49	0xec81abfe	0x634a2ed8
++	0x9635825a	0x0943624c	0x5eea8464	0x578e2344
++	0x551bd5af	0xca02915b	0xea419d8c	0x9d0fa00e
++	0xf3633f48	0xc6ad62ae	0x1eeef6ab	0x21ab106a
++	0xe325954d	0x60457916	0x6ac9168c	0xea8a9d6f
++	0x14772361	0x7630452f	0x8795e1de	0x21144d8d
++	0xe7996dd2	0x45aff64a	0xfa62c37f	0x3f5a04cf
++	0x250f988b	0x7985d243	0x1f717008	0x7908d22f
++	0x4fc0d5d5	0x856d9819	0xccfab84e	0x3fec2a74
++	0xe75c1af6	0xe2682ac3	0x2f08e560	0x7133d2a0
++	0x63e5fcca	0x3a17438f	0x9cb826c8	0x06a2f3cd
++	0x4bac2001	0x50596ba4	0xe74758d4	0x64d17e0a
++	0x08fc5b67	0xb0d62f6e	0x95eb8e15	0xd51bfa64
++	0x421c68b9	0xdd1526a8	0xfb7ea10e	0xab21193a
++	0x4b1186dc	0x77bbfd82	0x1ab08e9f	0x871659a5
++	0x1658fd5f	0xa04f322d	0xf50ed273	0xb8d411a7
++	0x8056489c	0xfbd858ae	0xd70f7d88	0x3c5cbc78
++	0xf53ec2be	0x1d2228e2	0x8b53aace	0x212454d9
++	0x76ea1d2e	0x9ca66373	0x9f6679c2	0x51c48b56
++	0x47348811	0x8abc0a27	0x60050980	0x5d290483
++	0x7ea8504f	0xde186466	0x91219d4c	0xa73144ed
++	0xb5f36fa4	0xa37912b8	0x02625bd3	0x3bc2d9ed
++	0x2e623844	0xa9a751af	0xf0ba18af	0x4433e06e
++	0xca7cda24	0x686c9163	0x86a437c1	0xf8c17120
++	0xed50542e	0x62b61fa1	0x600e47b6	0xdff86df8
++	0x77502dd5	0xea5d75ac	0x095a06e4	0xa18efafd
++	0xfbd01eaa	0x27a1cb0a	0x3dfcab8e	0x07be7250
++	0x086cb680	0x2c1ddcf4	0x6fa79784	0xcd874edb
++	0xa383d520	0xa5c0d1cd	0x2e09cd9a	0x34d645c4
++	0xf6b9b98d	0xe8e80ab0	0x39b78c60	0x6098b6f2
++	0xc3c13e53	0x88c9fd83	0x60c9e766	0xf49c4c2d
++	0x79e3d3d3	0xbfade7d5	0x6ba57dc1	0x3069e3ad
++	0x59632e2b	0xb86e871e	0x2dd63287	0x9704b283
++	0x343a6cb3	0x37d7950d	0x283f262d	0xd49d5f75
++	0xdacc49b7	0x5952e045	0xc0fefa19	0x69effce3
++	0x5b2a3c0b	0x3757339f	0x18584f8a	0x77a80760
++	0x5fcdadc0	0xc9b4df80	0xfa521be0	0xbcfc8ecb
++	0xfd3f8eb8	0xbee4739a	0x139caf94	0xbdea1cd7
++	0xab158240	0x233fd8dc	0x8ec63274	0x34eee6d8
++	0x4603b2f8	0xae544fc5	0xcd444551	0x2b2b349a
++	0x0a562524	0xb2e02518	0x577b1125	0x8b3c1ff9
++	0xfd27d88c	0x2ad77d04	0x1f82a54e	0x20254fdc
++	0xee8e63cf	0x8df3fa2f	0x9ffc7c43	0x421ae12f
++	0x9b166441	0xb74a5a4f	0xdad0511e	0x0a8ee5e9
++	0x8fe86041	0x37ef90ea	0x3fcf8380	0x87288691
++	0x384b8b8a	0x98d8a45f	0x995443d7	0x6c617236
++	0x9a40f76f	0x9f30733f	0xfdbf3927	0x7b4c0281
++	0x9e87e64f	0x9802938c	0x65f9de31	0x829c3eda
++	0x0a1d2f4a	0x22e0e854	0x30045b70	0xbf84a44f
++	0xc2c30b57	0x47c5ff90	0xaea87e93	0x99c69ae5
++	0x1080e89f	0xc2896e80	0x09ba0cb2	0xd16ee263
++	0xe05337b0	0xef1d8359	0xc1d4b102	0x08620117
++	0x2e4ab2bf	0x05dc3af8	0xc7ab866b	0xeee05983
++	0xd0a00c19	0x96996791	0x75ac6042	0x29001ada
++	0x13440a23	0x2b1eca42	0x4cddfd68	0x81a98384
++	0x6bcda226	0xa8594443	0x92f26e53	0x434de4ec
++	0x07596ee2	0x4c8ea6ed	0x5596054d	0xaffe0ef4
++	0x6dc1ab64	0x20bc006b	0xad4e3933	0xe6df0d3f
++	0xfb3ca9ee	0xc2895a4e	0x8fed0d43	0xa5ed7985
++	0xc364f083	0xc397a806	0x7b651ff9	0x1d7e22e5
++	0xfd02f57d	0x5f16a429	0x8612177a	0xd36b8983
++	0xd87b0303	0xeaa632b0	0x57dff2b2	0x19772dd0
++	0x51317bfc	0x28404b1f	0x9e35d818	0x9c771bb7
++	0x6d42a5c1	0xa6030578	0x9c844d5f	0x95d5eb7f
++	0xdf15f5ec	0xf0f8c86e	0xf8ebfd20	0xae32d9b5
++	0x4ce2b066	0x776f0149	0xda8a429f	0x0e895a79
++	0xbe62c881	0xf9c051d8	0xcaa48f97	0x9e8dcb1b
++	0x69cafc21	0x411f1bff	0x4f4d71dd	0x102cf709
++	0x974ebe53	0x7373aea6	0xef2a7ec1	0xedabaccc
++	0xdac969c4	0xe010b562	0xb6880570	0xa7a7f5d4
++	0x3c6464f2	0x96dea774	0x1614a588	0x06074080
++	0xb37304f0	0x99da7dda	0xd3e36214	0xb27b7cae
++	0xb4cef0b3	0xa435dc77	0x9d1c1a15	0x616993f4
++	0xb8a5ec8f	0xdce1ff5a	0xaaea14c4	0xa5d2172f
++	0x90c8c636	0x49c0b81e	0xff9db895	0x4252b336
++	0xd420b5ce	0x87b35be4	0xae32bda2	0x441092d9
++	0x321e8583	0x7d863719	0x3c888147	0x3f2bb9f6
++	0xd1daf5f1	0x682f2ffe	0xae62e280	0xcf8f928a
++	0x4a7237f5	0x6f3a55af	0xb91dba98	0x9b83b723
++	0x0e857ed8	0xd5ac567d	0xaf8bf791	0x23f8269a
++	0xe369638f	0x6a88edb1	0x5ff0be07	0x5c02b513
++	0x7d22f89e	0x2f865c08	0x9cc0d56e	0x31c87205
++	0x420508f2	0x95a21602	0x04d838e3	0x353353e8
++	0x7ca1feb6	0x61c6f7dc	0xf78a68eb	0x918f2ac1
++	0x413037a4	0x09692d1c	0xc8eceb54	0xb1bf975a
++	0x2ab63552	0x467bceeb	0x408bf024	0xeaed2b31
++	0x3255158b	0x8d9c6617	0xe450350f	0x615cf5f3
++	0x1a7fd744	0x27a0da59	0x43298211	0x77392298
++	0x9511e81a	0x08a2c2dc	0x3d6f1113	0x967e6586
++	0xd1726b35	0xb9292da6	0xaa6f8ad4	0x0f13b47f
++	0x34b96cea	0xebd9487d	0xfe533d60	0x41bcdc60
++	0x364c8c79	0x32be8bb8	0x1395ead9	0x9e85e474
++	0x146b6fbc	0xc93267cf	0xcdda98d4	0xccfb2835
++	0xe779dbd5	0xf9288237	0x2073e129	0x16fe4ab8
++	0x34ca576d	0xac313eb7	0x5deb3b4d	0x1727510b
++	0xc168a414	0x332cd921	0xe38e8123	0x9a2c1aef
++	0x80f5d1d9	0x7c88c923	0x8af17577	0x59ae1408
++	0xffa5e565	0xb418ab13	0xdd6376aa	0x45cd70d9
++	0x3c3a06a2	0xbc555669	0x34d1fc08	0xc2aa934a
++	0x385416e2	0x91ceeadb	0xe06c9cef	0x0394dbd4
++	0x43e7c657	0x296d7621	0x55dafcba	0x808b836b
++	0x61c41f0c	0xd9689bc5	0x3a531ffd	0x8417ed30
++	0x3f3f8616	0x641eb4a9	0x24964006	0xe8d2612a
++	0x3b916d7c	0x5603319f	0x29007523	0xc9c7dc1c
++	0xd1f7212e	0x22ac1932	0x05c39a5a	0xd55081ce
++	0x589ae996	0xa998fcbe	0xd8df5512	0xef7d7a01
++	>;
+diff -ruN u-boot-2015.01-rc3/arch/x86/dts/microcode/m12306a9_0000001b.dtsi u-boot/arch/x86/dts/microcode/m12306a9_0000001b.dtsi
+--- u-boot-2015.01-rc3/arch/x86/dts/microcode/m12306a9_0000001b.dtsi	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/dts/microcode/m12306a9_0000001b.dtsi	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,814 @@
++/*
++ * Copyright (c) <1995-2014>, Intel Corporation.
++ * All rights reserved.
++ * Redistribution. Redistribution and use in binary form, without modification, are
++ * permitted provided that the following conditions are met:
++ *	.Redistributions must reproduce the above copyright notice and the following
++ * disclaimer in the documentation and/or other materials provided with the
++ * distribution.
++ *	.Neither the name of Intel Corporation nor the names of its suppliers may be used
++ * to endorse or promote products derived from this software without specific prior
++ * written permission.
++ *	.No reverse engineering, decompilation, or disassembly of this software is
++ * permitted.
++ *	."Binary form" includes any format commonly used for electronic conveyance
++ * which is a reversible, bit-exact translation of binary representation to ASCII or
++ * ISO text, for example, "uuencode."
++ * DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
++ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
++ * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
++ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
++ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ---
++ * This is a device tree fragment. Use #include to add these properties to a
++ * node.
++ */
++
++compatible = "intel,microcode";
++intel,header-version = <1>;
++intel,update-revision = <0x1b>;
++intel,date-code = <0x5292014>;
++intel,processor-signature = <0x306a9>;
++intel,checksum = <0x579ae07a>;
++intel,loader-revision = <1>;
++intel,processor-flags = <0x12>;
++
++/* The first 48-bytes are the public header which repeats the above data */
++data = <
++	0x01000000	0x1b000000	0x14202905	0xa9060300
++	0x7ae09a57	0x01000000	0x12000000	0xd02f0000
++	0x00300000	0x00000000	0x00000000	0x00000000
++	0x00000000	0xa1000000	0x01000200	0x1b000000
++	0x00000000	0x00000000	0x16051420	0x610b0000
++	0x01000000	0xa9060300	0x00000000	0x00000000
++	0x00000000	0x00000000	0x00000000	0x00000000
++	0x00000000	0x00000000	0x00000000	0x00000000
++	0x00000000	0x00000000	0x00000000	0x00000000
++	0xc2b13ad8	0x6ce74fea	0xd364ad12	0xf6404a69
++	0xc89041e4	0x217fa2f6	0x6ff6e43f	0x79cde4eb
++	0xdb01345a	0xceecca42	0x5ee7d8b4	0x24afdbe6
++	0x5fb36178	0xbc17d76b	0x31b7b923	0xc81aec82
++	0x647b3320	0xf1db9653	0xff3b9759	0xe9c74b72
++	0x3b193752	0xc147860b	0x160e0d6a	0x5bdb9dbf
++	0x1ccce2ac	0x387670ad	0x2f106f05	0xf8607ea3
++	0x42562576	0x30e086fb	0x409a06b8	0xf1957736
++	0x5eb03f65	0xad147fab	0xe1a8e8b6	0x208d59d2
++	0x683fba2e	0xf172b378	0xf8138dba	0x61e81d1f
++	0xd551f997	0x28c79780	0x04f9db27	0xa80679b9
++	0xaca4e7ff	0x6876944b	0x26d7dbc1	0x77f7dc2a
++	0xf0bcb163	0x1b2a8e81	0x7b90aa49	0x8d5eaf2f
++	0x522384ae	0xae7f7082	0x412ba10a	0x1ce1baa0
++	0x478c29b4	0x9c09b4d2	0xf225f64f	0xd43026cd
++	0x81098579	0x7df5db05	0xa5815bb0	0xc73ee756
++	0x9738cb95	0xa5bd62e2	0x88e2c6b2	0x778e7fcb
++	0xd3bdb872	0x9404403f	0x5be6ad63	0x71dc4abc
++	0x11000000	0xd350099c	0x242d0996	0x1a4ddff8
++	0xd7f1f03b	0x77590eb8	0x45c3ad79	0x3b714d23
++	0xa85ba322	0x31851c5a	0x540fe0ce	0x38692bd6
++	0xe3d9927b	0xb33428b5	0xcf0ac8d2	0xd3646604
++	0xca88adc7	0x8afc41c8	0x721432b3	0x8fd19454
++	0x26344e0d	0x3acf6c28	0xbda18c21	0x526d52ac
++	0xf8d37e15	0x09305e37	0xf6907871	0xdb56cc21
++	0x6802cccc	0x6693c8a3	0x0f4dbe32	0x0d924103
++	0xee9242a7	0x5f867a13	0x2f65a246	0x6b35ad05
++	0x39fb7da1	0xd69cb7d8	0x45869424	0x4768b466
++	0xe3ace365	0xa85eea7c	0xa59939d9	0x2ae32fb9
++	0xa20b1559	0x8865f3d3	0xbe02e023	0x4199575b
++	0x0c43089a	0x0d57b287	0xd37544ad	0xcd4573b4
++	0xa96b7485	0x05b67259	0x117414ca	0x2ba24577
++	0x439db14d	0xf82c5833	0x54ec9806	0xf8282306
++	0x1de7d3cf	0xf7a76dc2	0xcd897f60	0x0bb1decd
++	0xae58efb0	0x743c07af	0x48adffb5	0x262260e7
++	0xaa9fa071	0x9a9ef7c0	0x98e861eb	0x14a48871
++	0x0b4c3292	0xad851820	0xe0f7f45c	0xd71366c5
++	0xc63a2f01	0xd02f23c6	0x49645eb3	0x2365fe48
++	0x44817f1f	0x576ee68e	0x396b6134	0xd9fc4857
++	0x9a771368	0xda5f2693	0x6ad30ec2	0xc8d08171
++	0xe40bcd42	0xf82291a8	0x3094a8b1	0xd3edffa3
++	0x5d5fb5e6	0x93802a7e	0xdf0ff376	0x09ebeae6
++	0x35091690	0xe938ec68	0xd203065b	0xcf2e8172
++	0x85282b27	0xe59fb64d	0x4b2ad981	0xeb5dde75
++	0xc07eac26	0xa78c969e	0x74165d84	0x61c4cfc8
++	0x740452f3	0xe5f6435e	0xb712e157	0xac49215d
++	0x5be5e61b	0x09f46a94	0xde5cd48d	0xe3ed6b11
++	0x2e8173de	0xabb6759b	0x46ffc47e	0x0cd84607
++	0x6046c26d	0x19356116	0xe1da098e	0x8e1bbe9f
++	0x5c8d6c20	0xa17cfe55	0x101a1f91	0xd64aef70
++	0xef2e7b34	0xbb428dc4	0xf2252a3d	0x8ab3f6c0
++	0x161db4ef	0xfdbf4f9c	0xb5bf9f19	0x414ea8b5
++	0xc3db5422	0xfc3934f2	0x635a8253	0x86260b8c
++	0xa4c0e59a	0xa45d24cd	0x4a25da59	0x7a568be1
++	0x4ae3587e	0xbc77a3e8	0x70723657	0x9abcabaf
++	0xe0a95d4e	0x25519f22	0x3ee1d340	0x2ddc2ca8
++	0x04ae20c3	0xc143f7c1	0x4a79e4d6	0x19377b64
++	0x2ab0d3f5	0xd3f19f6d	0xc8dc880e	0xf577dab6
++	0x69b6ac46	0x37d4af3b	0x0999bc85	0x3d9fbbf5
++	0xb9387ac9	0xc148824f	0x4d11f5f7	0x1ff4594b
++	0x59beb5b7	0x29474f52	0x68e6b2b9	0x4b60966e
++	0x5e40a736	0xdeff5ef2	0xe623bbc1	0x50407021
++	0x34ec34ec	0x131b3d57	0x628bda97	0x58152b10
++	0xdd830410	0xf953e469	0xea4c8d25	0xd79d7ba0
++	0x7a4da4f4	0x887d6841	0x7ff1e41f	0xdeffc5dd
++	0x8354cb26	0xb133716f	0xae73deaa	0x292e200b
++	0x9a9400f9	0x7a5d21c3	0x590d4799	0x1333b4a3
++	0x782bbe3f	0x314fcb2c	0x475a1cca	0x4cd07c7f
++	0x7a69a5fe	0xaef5a52a	0x0e9957f3	0xf7d86f6b
++	0xd0983d0b	0xdffd48b9	0xbeea1e9c	0x19de4c7a
++	0x46487695	0x5719e4e5	0x6dab39ac	0x856bf2bb
++	0xc0644339	0xe60e92ee	0xc328b5e5	0x2d0c31e9
++	0xeb73f1f4	0x7b577248	0x361159ba	0xd0f7002b
++	0x5fa816ae	0x11ace78c	0xab62e0da	0xc924891a
++	0x1d5800e7	0x4f90e04a	0x21374c9b	0xa3350e64
++	0xcb9c1901	0xcc350b3d	0x5c3e5932	0x3cc6261d
++	0xc3b54acc	0x849cf200	0x1425fad1	0xb3a479d9
++	0xfd4dfda8	0x62973133	0xdd528736	0xd7e62e0e
++	0x6921e1d6	0x7e41d7f0	0x74397b86	0xf739079a
++	0x4ff82d1b	0x38b6fcdc	0xb20e36bb	0x0cef9b7d
++	0xa737fdf3	0x1d18ef1a	0xc2c5dda1	0xdb16c5e7
++	0xbfa99b2a	0xf83f2c10	0x883c8183	0xad10014d
++	0xcf9f6321	0x5e0c079c	0x3ddd3d29	0x306325e0
++	0xebdaff05	0xa88741be	0x181fbf20	0xa58a3a1c
++	0x1f7c7165	0x7f5f5141	0x12576e50	0x9db22976
++	0xd1fbe204	0x6ca2025a	0x10c15009	0x920649fa
++	0xf42d3035	0x79efbc73	0xad2bde6c	0xb4e317ab
++	0x1f7358be	0x447d850f	0x9bb2d1ee	0x3545cea3
++	0x78eff6bc	0xaa86e51f	0x6383ada5	0x0c969d05
++	0xadd720e6	0x92f77e04	0xda58e24d	0x401bd323
++	0xdac090fd	0x9dc372b2	0x86726956	0xc508fde7
++	0x20ec1cf1	0x29fdb66a	0xa3f7e3b2	0x5ffa58ac
++	0x653c0106	0xf0d01026	0x55feffa1	0x661399b6
++	0x5b23998d	0x91add159	0xbf917f02	0x87ef6fee
++	0x64c4d653	0xbfadf48f	0x23f3ebcd	0x67869030
++	0x3b90b7ae	0x19efc2a4	0x26596a35	0xaaa5fcf9
++	0x5a14fd14	0xebeb9c9f	0x72224625	0x3a2c0009
++	0xbe5a09af	0x5aad7b74	0x7d92261a	0x8bd722bb
++	0xfff48488	0x0379b991	0x750cdaf8	0x83d3ec67
++	0x2f582115	0xfdeca132	0x889817f9	0x2bcccbb5
++	0x58107ba4	0xb57e016c	0xbbc45c80	0x5f14439f
++	0x6e71c73c	0x5e18e93f	0x43c07fca	0x6d49bc66
++	0x6641a788	0x234f48cc	0x9e18222c	0x86efa566
++	0x450ad39c	0xbc3ef112	0x98e7d17c	0x5334659e
++	0x9919cb9c	0x9fb4f0c5	0x2ea90893	0xc70453a6
++	0xe83cc486	0x454da884	0x4cba0511	0xfb83f2aa
++	0x0cf7ec27	0x20ef41bb	0x08355d0e	0x732798dc
++	0x1689d337	0x61bf955b	0xa10d3f79	0x05fe9c6a
++	0x1cbbc776	0x42e00326	0xf92509f4	0x71488be8
++	0x3d92da26	0x839acf18	0x6dae5781	0xeecfcc85
++	0xc63c0f72	0xcd79f887	0x677dd4c5	0x167c779a
++	0x3359b45d	0x48f974f6	0xbd7debdb	0xd57d5935
++	0x41beb132	0x1574e273	0x417a8fb4	0x46ca9d85
++	0x859f3434	0x7cd1675e	0x1fb4e8b2	0xc55de45b
++	0x4be8afa5	0x193c1260	0xd4225590	0x255fb988
++	0xde63caee	0x96108c66	0xacc2b48a	0xad2992d2
++	0xdd4cf4ad	0x0f6f5246	0xaf20d77d	0xf1c81d1f
++	0x0db57bac	0xbb39c168	0xb78944a1	0x4ea55714
++	0x0bb537be	0x5824ab81	0xdb9345fe	0xab0606d4
++	0x12a8b9c2	0x90001c30	0x12c7197e	0x603cae66
++	0xe2cb6b47	0xab0f94ba	0x28091fbd	0xb79d112d
++	0xc53a69b4	0x7de8c3bd	0x4aee880f	0x5a5dd399
++	0x850105e4	0x366d8714	0x4da7971b	0xc3a0013f
++	0xfbc2461e	0x65954a32	0x4c8f348e	0x3ddf0054
++	0xc615725a	0x3021e167	0x4a88ec0c	0xd69c44b1
++	0xb21cd2b1	0x08e16586	0x90f02d12	0x554afff3
++	0x65067d72	0x8c310d6a	0xd62ab40d	0x443bda33
++	0xb6eac5c1	0xd0cd461e	0xaf200f23	0x41fd1b8e
++	0x84e74a66	0x15b0bc4a	0x13fb1a4e	0xb36bf139
++	0xeeaa0c1c	0xa91d6fab	0x64c99859	0xc049d5ae
++	0x38921c4f	0x92b2f269	0x5c867fd7	0x41bd4d62
++	0x70009a4c	0x85a37897	0xe228af8e	0x9ef4f31e
++	0x891bbb42	0x3c09f291	0x32c29325	0x88f9ee6c
++	0x81a0bc38	0xfef31889	0x8d2e3f79	0xc5e405f7
++	0xb78e4127	0x3d61f392	0x3427d259	0x9f0bb662
++	0xfe6ffb44	0x57e1e8c2	0xd4abd164	0xd0449914
++	0x5bd5fe60	0x873601a5	0x0b07ae28	0xf4aac893
++	0xb9c8f9f5	0xe3a514ed	0x9da193c2	0x55ebeca0
++	0xa9d8f9bd	0x0a37dcc7	0x3f1d9f15	0x0bc645d8
++	0xb808085a	0xc79b0f4e	0x0286eafc	0xefc87a56
++	0xf1225ab8	0x58ac6a9c	0x9227ea3c	0x82deed0f
++	0xff0f8edb	0x3c29a1b6	0x6d777dae	0xbeeee7d2
++	0x0bdca157	0xf8d9d18d	0x52fda265	0x630da310
++	0x4f660e86	0x1c985fc0	0x68f1c993	0xf4ae63bf
++	0x3ec5373e	0xf6a10f89	0x2b19bd61	0x8aab04b4
++	0x75653336	0x4be6689f	0xc2631812	0xc6d386f4
++	0x93a6268a	0x4e5851ad	0xc2b47fdd	0x5acbd226
++	0xd2aaf25f	0xbe83081c	0xe57eb32e	0x00debc3c
++	0xcd8d7dbe	0x7cf67994	0xba17c779	0x34c19529
++	0x5cf29a31	0xe10b7d8e	0x7b116896	0xf702de15
++	0x6ee2e8cd	0x2f3a12d0	0x0e2a4666	0xbc1333e7
++	0x2b653c7f	0x36e282a5	0x0ca0544a	0x2255b148
++	0x5e413d5b	0x0fc88547	0x81e3073f	0xbcef6576
++	0x12b29e93	0x233bef85	0xd41790ed	0x4f4dbf15
++	0x20dea3d6	0x25f86504	0xb13177fb	0xee626fbb
++	0x2f7529e3	0x6157578f	0xeee068f6	0xc97c5909
++	0x053c28cb	0x6f540d47	0x692bb599	0x7004243d
++	0x1c5620cd	0x0ca53749	0x9d7d6a4b	0xb8e504f7
++	0xdd138f32	0x4d2fd525	0x676904b1	0x67b90411
++	0x6777ede4	0xc1fbe02f	0xd7eb61fe	0x1c62f909
++	0x91cfdb29	0x293a8d72	0x4475e4dc	0xba9d955f
++	0x5413cb0b	0x952694f7	0x3b8eede3	0x33f1f6cc
++	0x61c2604a	0x244f8403	0x862316a5	0x2e0387fc
++	0xb3b3c699	0x418f5b0b	0x89a49abb	0x6c325320
++	0xa952f0c0	0x72454ccd	0xaa272d96	0xf05e80d4
++	0x1dceb03a	0xdb00d312	0x96cbcca4	0xc87c31f7
++	0x96b17422	0xdba12c7d	0xedaac717	0x99b1da89
++	0x48f3e07e	0xbace3088	0x71937740	0xd754a585
++	0x31784510	0x36d08e4c	0x4e8e2396	0x081fe566
++	0x0cd2092c	0xec932481	0xfae11d02	0xcb3b8609
++	0xe20559f2	0xa2330b46	0x2beec857	0x86911540
++	0x5e8e1895	0x4f42f3cf	0x8e32bede	0x78285f4c
++	0xaf267610	0x9dc86091	0x6adf9b99	0xfc91da24
++	0xc987356d	0x78f260f0	0x9cc6f796	0x1d6aa013
++	0x5f1922de	0x54d065e8	0x8a7c3cea	0x13768df3
++	0x4e8858b2	0x712b5b8d	0x0b64c3be	0x3845ef6a
++	0xff77b842	0x83a497a5	0x77f15aaf	0xccfc6df7
++	0x20084d31	0xaacdde0d	0x4059b446	0xb940b3a7
++	0x3fa88d6f	0x3162ec66	0x43cc767b	0x2a2a6916
++	0xd0dea02d	0x5b9f11a1	0xec36c7a9	0x6d7eb6ce
++	0x4506fc1a	0x1c3e362e	0x9e2b0f99	0x547e6ba7
++	0x6b8169ea	0xbd89401a	0x2cf5ea6a	0x100e6249
++	0x47ef40de	0x063a0b33	0xb1f49499	0x3026e75d
++	0x3b6d951b	0x6212fd9a	0x5073aa23	0x9bd609b2
++	0x760cf7bf	0xe6766d03	0xff811dac	0xa461d069
++	0xf40e74b3	0xec113577	0xa2cf15e0	0x6f43a20a
++	0x43f52321	0x96896eb8	0x480c1129	0x35190a4d
++	0x29a80a08	0x8ce4dd2c	0xf4b40d21	0x2324ef9a
++	0xf3f2b54d	0x7a0cc79e	0x3e9d973e	0x2d28dd0a
++	0x1a5e9aae	0x5abb6fab	0x215bade0	0x39e678c3
++	0xd6543c64	0x1652e0d4	0xca2f5303	0x0a6879bf
++	0x24841561	0x05c559e7	0xa1ac6c48	0x3fc52191
++	0x29527695	0xb977ce60	0x04589311	0xaff7180b
++	0xdeb08866	0xd62d8f6a	0xa6f62306	0xfdef1235
++	0x1946ad8d	0x1d49fa21	0xac486c1e	0x3ca80491
++	0xba8c2a76	0x06ce9ac6	0xcbfbc465	0x675c4ada
++	0x1eb6b108	0x27d03a7a	0x606144e6	0x2eedb163
++	0x64d8d1b7	0xe7695fde	0x75d593a5	0xe7f00f68
++	0xc3c45a5a	0x522c4164	0x37833c3d	0xddfda19e
++	0xd7b9f984	0x77e6ea85	0xd148df03	0x89989155
++	0x80fd8f07	0x3adafce3	0xf4e07aa6	0x6ea417b4
++	0xd1732fad	0xd13cba8a	0x01729b17	0xb9e666be
++	0x48addea4	0xffb3a560	0x4a96d730	0x0349777c
++	0xbf355e6a	0xb5055554	0x22442c5e	0xd8bda1b4
++	0xb0a088ab	0xef18b9a6	0x11ecc51d	0xd59247f1
++	0xf86fe339	0x17752dba	0x0bfacac1	0xdef25155
++	0x035b4275	0x02a3f293	0x8466a5bc	0xf376864f
++	0x04265d7d	0xc6fc5aa3	0x36adf7ec	0x4e16af5b
++	0xe3b28d5a	0xa49c6535	0x2b05f03b	0x46d5d914
++	0xfcae58a0	0xda644349	0x656d72c0	0x75d47095
++	0x302a9fad	0x4e245aaf	0xe2a3e852	0xa9b73076
++	0x8d9a2469	0xe7c05607	0x1c17b4b3	0xc2e63302
++	0x49fa365d	0xabf1f5dd	0xc850b090	0xdced47ac
++	0xd60b15d7	0xb25efb14	0x33f9a3af	0xd011cc8f
++	0xf0414eaf	0xff212e84	0x9e2fbd61	0xf6636285
++	0xd892696a	0x6d9ffc34	0x253ad380	0xffb7ed45
++	0xaae31520	0xadba81d1	0x7f1e41bf	0xcd7e1eb7
++	0x9dabd0e9	0x5de91eeb	0xe9fa68ed	0x3fae0c6a
++	0x6da21b40	0xac743c3a	0x19228523	0xf5098069
++	0xf647fe8d	0x95666621	0xa2a3613d	0xe6278031
++	0x6901cfe4	0x3bf132be	0xc3314ee8	0x5b8261b8
++	0x9b724149	0xd0838d83	0xb0d05c76	0x57295707
++	0xcb11fd8f	0xfdce9b20	0x346449b6	0xe8b44745
++	0xc0784ff6	0xe6083a3f	0xb0b87142	0xd2df2210
++	0x7b9dc719	0x961585df	0x359390ec	0x0d40e1f0
++	0x56436a52	0x8ccb0d80	0x78066e70	0xcfd04ac4
++	0xd850a6a2	0x00612831	0x19e74acb	0x5a80989e
++	0x0d7b151c	0xca9bee4e	0x2fea9d99	0xfdd7ec3c
++	0x3a73b4e7	0xa70068d1	0x38aff576	0x4c861c14
++	0x2e23b093	0x0e429806	0x8cce23dd	0xb0ce104f
++	0x1684bf8d	0xb2756213	0xa64c594a	0xdd8ee144
++	0xda5316cc	0x76dc877f	0xa1c5fe35	0xb5e04383
++	0xc9e10000	0x8ac58408	0xf6d7e781	0xbda6cdc5
++	0x81517c56	0xdee2ba90	0x3cbfc247	0x4c84887c
++	0xa722c632	0x4767a4b3	0xe83b79a3	0x7f100150
++	0x1074198a	0x220260db	0x1c940f4a	0x92c42619
++	0x56dc9f64	0x1c0f7eef	0x3694f4e8	0x5b4b63d0
++	0xe784afaf	0xcdcdb039	0xf7040a88	0x47f2d84b
++	0x143a94b5	0xf68f4fab	0xf6640462	0x3cd6b1c1
++	0x7fbe0e60	0x700ee673	0x030e877f	0x60779cb8
++	0xddb6933d	0xe46f377f	0x9f9c43c9	0xce0f0d58
++	0xe6bf42a4	0xae09f51b	0x295e8cf0	0x140df2b9
++	0xfb04c209	0xb6d46f7b	0xa86e0c91	0x64fc624d
++	0xa7a8760d	0xdac844b4	0xbe1491b0	0xad480684
++	0xea874ca4	0x3535e483	0xd49365c9	0x83f2c050
++	0x05ec206f	0x7fe3b010	0xb72aadbf	0x40b3a286
++	0xafe395a8	0x3506d4af	0x9c4e33e7	0x0259eba9
++	0x0daecf5c	0x264c008c	0x898bdada	0x0f3ac833
++	0x7ef5f3f8	0x41934050	0xc3bda261	0xab624dd0
++	0x5d93609b	0x495a5f1f	0x34119efb	0x3bfd15fd
++	0x49255da9	0x3ab2d260	0x15ce2006	0xd466d454
++	0x3d052ca5	0x567977cc	0x7f8b8657	0xd9b34f42
++	0x36c65ff5	0x5f96bffb	0x2d32daf1	0xb301cf05
++	0x933435e1	0x316fb1ae	0x48be2982	0x657c3286
++	0x1916c189	0xa3a030b5	0xe4c7bce9	0x6a762931
++	0x1e90df3b	0xe9084ef0	0x1236cfe1	0x7239326c
++	0x29bd4dfe	0xaa01cc46	0x93e514ef	0x4e376f6d
++	0x14087975	0x9cdad6f9	0x86b31bd6	0x2c206281
++	0xe178b367	0x4943f013	0x9f97c9dd	0xe848fb0d
++	0x7d19e49e	0xde4d9b1c	0xee7f552b	0xadea7634
++	0x605ab7c5	0xef66b062	0xaf369aec	0x39a96463
++	0xb39ed4e0	0xf4c38bbd	0x48565c84	0xcb4ccad7
++	0x37b656c4	0xa5291b2c	0xba05d037	0x0027ff97
++	0xec2034c9	0xa19abaff	0x99dd50bb	0x44bd5f0b
++	0x8cc4193d	0xe1dca3f4	0xae2896c9	0x992105a5
++	0x46b04aed	0x3ca454cd	0x9a0e86a3	0xfdb3702e
++	0xf2ddfd7c	0x6b7ca41e	0xe49f2227	0x4839351f
++	0x201f1173	0xc9af9d40	0x7942ef65	0xf35e5867
++	0xe5358390	0x0beff1a6	0xd057a81e	0x89830387
++	0xe496a246	0x45007e0b	0x62c34ed5	0xc2170342
++	0xa095780e	0x00682a8d	0xfab7e24d	0x207cb6f9
++	0x7d5c8058	0xb0164454	0xee8b6d44	0x0aa01190
++	0x70637e84	0x1268c1cb	0xf7a1eb80	0xbe90b153
++	0xcdc765f5	0x5841d605	0x00141f5d	0x475f8d3a
++	0xff60a6f1	0x5f7a2e3a	0x30d3f150	0xd9a22f7e
++	0xdded3241	0xfb05ea5e	0x4093fd88	0xb11f5a9e
++	0xf1b36594	0xc7579059	0x7f66c5e6	0x8fdb1095
++	0x46ff7f62	0x70925647	0x207287e3	0x6bddfe5d
++	0x240fb596	0xc91784fd	0x28acd7f8	0x7cfbc9da
++	0x2d6b3cc8	0xf8e9aaf5	0x489616b8	0x9ed70056
++	0x586bca94	0x6a95971e	0xa2238b5e	0xc9a06325
++	0xb90882a9	0xb5b3ffab	0xae4b2beb	0x5aa0ee34
++	0x52e23123	0x9a019e1c	0x84b0f00c	0xba2cf495
++	0xca4108dc	0x9272b0e7	0x760b209d	0x3e294274
++	0xb8f0316a	0xb666af5b	0xcf436e91	0x365dd253
++	0xbf11262e	0xdfa3f8ee	0xd6e0ab96	0xd8a639f8
++	0xcba8b31f	0x58940e1a	0xa4bf5e3a	0x7f8cec5e
++	0xb5ec87d4	0xb7924503	0xe2bff3a9	0xc7ec4445
++	0x1e94324c	0xccf28ba8	0x2294b594	0xad297087
++	0x18624369	0xa017851f	0xc635302f	0x802becac
++	0xe631eaeb	0x386589dc	0x780823c4	0x7b989c1d
++	0x94554d93	0xfc22d343	0xb8edbd0e	0x8bc08005
++	0x998a234e	0x507d3976	0xf1f9833c	0x522a2971
++	0x2765433f	0xe1ef356f	0xd45d5fd5	0x8d3294d3
++	0xabcffdba	0x9b7a6338	0x2f261e1f	0x891fdbd0
++	0x67008f6c	0x23d96866	0x057410ec	0x2f360684
++	0x8380c618	0xc968f3ae	0x91ac868d	0xdb5cc503
++	0xf092b320	0x73ef35c1	0x0fada995	0x56316744
++	0xde2290fc	0x7070dee5	0xcf1cd6ab	0xf1a47253
++	0x2c53b495	0x8952b433	0xa5b47637	0x9dfe09ae
++	0x2fb36206	0xcb1dec3f	0xec188994	0x10407824
++	0x91f27ffe	0xd461edb0	0xc3779ae4	0xe3f9bede
++	0x183a107a	0x0122654f	0xe319bba5	0xe75c33cc
++	0xc657ea24	0xe5490f98	0x653d01c7	0xce09c546
++	0x631ea29b	0x81278443	0x0cd4dd3c	0x6b7da4ff
++	0xacf1363c	0x563ed879	0xe8420e5b	0x43adcc25
++	0xc6ff7dd8	0x21e26910	0xa4b4f3be	0xaea31be5
++	0xc241c837	0x07178d5d	0x2b69f8b3	0x3bc0b4e6
++	0x429c50c1	0xe493ba56	0x5933b099	0x237b2036
++	0x0e807425	0xe450e510	0xd72a6007	0xc1459771
++	0xe9b22ad9	0xb25e452b	0xeda83668	0xb00e8d93
++	0x12b8f351	0x703ed783	0x901c6109	0x72b3e601
++	0x099cfb54	0x7fc68f6b	0xda7f436b	0x1dd70c40
++	0x5a57914c	0xddc3fe51	0xf1b692dc	0xe8b066bd
++	0xaa7b0d19	0x4a593520	0xd3bb712f	0x1e1b4c0e
++	0xe651f456	0x4fd0e108	0xdef8932f	0x3de33c3a
++	0x4c189801	0x62c607ea	0x708e8086	0xf1b9d204
++	0x19656d6f	0x216430e3	0xc8bab24c	0x4ea84e4f
++	0x659f0cea	0x4e7bad1d	0x7f4d77d5	0xf6d114a2
++	0x6d8038b8	0x8d56f1fb	0x2f015191	0x0b3770bf
++	0xd81e40db	0xfe66c348	0xffd1d3bf	0x07021042
++	0x8ce5e26a	0xcdaa21ca	0x1bd4b85d	0xfabd423f
++	0xba6814e4	0xaa5fe624	0xb2591597	0x81e601e5
++	0xf3601f5f	0xf4dbb30a	0x0950789f	0xbe9b1f70
++	0x35faf9cf	0x9f27e299	0xf9c1075e	0x09b04ac9
++	0x2bb3cb1e	0x8c197668	0x8dffa14f	0xda4a57de
++	0x5e0f0a9a	0xd1521120	0x31c26430	0x46a75d9c
++	0x6c7e1a50	0xda1db6de	0xaef50782	0xd32d301c
++	0xa4688102	0x77c6bc1a	0x3c7e2525	0xcbd4284f
++	0x5f493a22	0xb35abf25	0xc996f4ff	0x009f0c05
++	0x6143581f	0x7a864557	0xd0e1d52f	0x0725f9fa
++	0xdcc0b294	0xc3609ee2	0x75373ce8	0x1ffd4ead
++	0x331b82b2	0xfa833542	0x43c00611	0x7ab1215a
++	0x099bb7f3	0x1c95dc3b	0xbbfb8231	0xf62659ba
++	0xf9cc6fbc	0x030b6f56	0x793603cb	0xe7c48d71
++	0x9754aa20	0x41710095	0x35b92718	0xf464fca0
++	0x4ad77ab4	0xd5582574	0xe0552ad4	0x7393e896
++	0x34920ff9	0xd0a44180	0x2e523669	0x81d5573c
++	0x1959ad82	0xfb153a03	0x1cfa615f	0x8b302a87
++	0x4e4eea7e	0x21ca24c2	0x5a971dcd	0x788e063e
++	0x2c9beb8d	0xb3b98af9	0x24079012	0xbdec8a61
++	0xc41752df	0x8d2c0a3d	0xe960ac61	0x658cae63
++	0x891956fa	0xd0d1a216	0xbc37b8fb	0x5e2c3009
++	0xd600a7ad	0x47c7c30c	0x8fbd13f4	0xbae4d97c
++	0xdd15d643	0x71440bb6	0x3fccfa22	0x1ef82308
++	0x2c48907e	0xf6ad303e	0xc1ed250f	0x6f9204f8
++	0x19062b0a	0xfe8ab325	0x379e8b1b	0x8116d220
++	0xc6d4d8cc	0x624098ee	0x3e6aad4d	0xbce3ace2
++	0xba349982	0x7439dd11	0x6ac6d240	0x9f2cf9c6
++	0x3dff687d	0xe5b6f2c9	0xbe1645a3	0x39a39bfb
++	0x7956d69e	0x50d22da6	0xb7e32b7a	0xf4144b4e
++	0xb94151a5	0xee36b1b1	0xc8cd8d65	0x5e571859
++	0x0db49c4b	0xd9d71cd9	0x4bc017ca	0xc81d5130
++	0x0c9660c7	0xe4b12b28	0x5549e753	0x97a9fa4a
++	0x0dac4813	0x7854b977	0x7c8cc619	0xe4166449
++	0x020ae016	0x02448146	0xa3924345	0x1542cba9
++	0x461583ad	0x7bf66ddd	0xaff59684	0x398b370c
++	0x5ffbd30c	0x87900806	0x0891afff	0x7aa84ad3
++	0x62e35158	0x995e545a	0x6ff3779d	0xa05bdc9b
++	0x777a7e83	0x53643dc4	0xd77d4704	0x422ec993
++	0xabd03cd1	0xcb6ad4b7	0xa94c512d	0x6562975c
++	0x63b27747	0xecc0955d	0xd965b2b6	0xc67b64c5
++	0xfd69b042	0xfe7314c4	0x9f807bbe	0xafaba4d7
++	0xbd63eb72	0x811a8901	0x7ea1be4d	0x7316f0fa
++	0xa6cf004c	0xc17d9363	0xe3fe88d2	0xe60faddc
++	0x5d3a1b02	0x8a9f1ed3	0xebfb9234	0xbc453cf2
++	0x190085ca	0x369a1df9	0x55721790	0xb071a9f3
++	0x0697bfc2	0x65753b76	0x177d720f	0x1563979f
++	0x970c4dd8	0x511aec5d	0x19878647	0xc17280ee
++	0xe61c4188	0x7a4c0756	0xdb49157b	0x0d461f37
++	0xcf0bc73b	0x1c6e7ac1	0x683a9e1e	0x0dd9ae7c
++	0x72be0902	0x85a22cd8	0x8b98d2dc	0x2f3a9ff1
++	0x4540314d	0x3a4e344f	0x3ada6bee	0x3408b829
++	0x711ba0cb	0x0c92ae4a	0x621bc5f1	0x908043da
++	0x8f8ac31f	0xed15f127	0x731dc6d9	0xdc6eb058
++	0x6815eb3e	0xaca3d9e0	0xef7b5c61	0xfea2a032
++	0xd3c76315	0x0f88f4c8	0x291b8710	0xa5ef8346
++	0xcab00448	0x78ef9fb3	0xebf0388d	0x33f2a5da
++	0xc41190f2	0x0cb6bcf7	0x0afe5680	0xef88d3ea
++	0xc0e10f4d	0x7e028bfb	0x933657d9	0x6f61fcd0
++	0x7e03e392	0x23258472	0xfb16ab16	0xfaf74a5b
++	0x7ab0a634	0x8346df0a	0xc3c93451	0xdff93a32
++	0x3920a816	0xc3331312	0xa6a2270c	0x10025010
++	0xa8f4d842	0x36b96367	0x77a30dad	0xe1bd6d0c
++	0xf3ddb722	0x9412e861	0x4e7cd927	0xef243451
++	0x41d7258f	0x6eb34be2	0x026ef296	0x46112337
++	0x656c8c07	0x18deff2a	0x5be15cbb	0xbaed3a53
++	0xc795a134	0xdcb1350b	0x758b6482	0xc6cd0e88
++	0x9be9d4f6	0x1ec7c2da	0xc5c1fe49	0x3e86e8f1
++	0x09126f9e	0x96772352	0xa4d5c70b	0xc6f1f2d6
++	0x3c22e595	0xd5ccf006	0x48f6167e	0x415dfe21
++	0xf49891e0	0xab4c4a7c	0xcd9b336f	0x5777d2af
++	0x6a8ad930	0x3f47c079	0x72286c81	0x44b565fc
++	0x5ff87a6d	0x6aad7ebe	0x66535422	0x4dfcef23
++	0xc0ffcc8b	0x6e2cfe00	0xf1e7e1f4	0x06e46379
++	0xce1bf7c8	0x70fec576	0xe9d0014a	0x844f7b07
++	0xb7a27720	0x4a62dde1	0x39207994	0xe12e7ef1
++	0x75f2152c	0xec05cfff	0xac67a90a	0xbb9f0c88
++	0x8fe2e008	0x58e15130	0xd54c4808	0x71fc616c
++	0x02564be1	0xf3d121e1	0x904f4a7e	0x7eaa8b70
++	0x893d8579	0xeb94b6a0	0x4c84f056	0xebf49f0a
++	0x2b2fb4cc	0xb6014008	0x1fe0a076	0x9e7af7eb
++	0xc168be50	0x61653283	0x2016760c	0x57c36535
++	0x720405de	0xb4924329	0xb1189d2c	0x9dd8f5c0
++	0x2a5f1ab8	0x49580b2e	0xacbbd3d3	0x3261e254
++	0x7a827ba0	0xfc91f0bc	0x2b02ba34	0x96edf03b
++	0xfd7fd36a	0x24edb430	0xafc7e2cb	0x0a8cd505
++	0x22ed5205	0xb42ca58f	0x24fc4009	0xf064cb61
++	0xa564a202	0xe42a9b54	0xd2a28338	0xca1f1a5a
++	0xbe51905d	0x9a960bd5	0x4238b656	0xfb08649e
++	0x76c93495	0xaccc0877	0xc465148e	0xa2bc11d6
++	0x84a54419	0x2a2ddd16	0xd9e1d2e4	0x622bbcfb
++	0xcf0608d2	0x93a26458	0x2b666698	0x0645f585
++	0xed3df83d	0xf6e81a41	0xce11e962	0x93c27f84
++	0x30f41197	0x659aba68	0x57c01eea	0x2a4cc4de
++	0xecf2f07d	0x3340329a	0x1084f771	0x9d4c351c
++	0x32d28528	0xa3b947ae	0x78fce7f7	0x14d0290c
++	0x7b7ac82e	0x7de381ad	0xa907d620	0xc31ae25b
++	0x513a2723	0xd8cc3457	0x8fe676a6	0x04039d12
++	0xdce5a5ff	0xcc0af574	0x1406d489	0x3393d517
++	0x004cfc81	0xeffe2eba	0xf2ee0c96	0xacac4889
++	0x6484e7d3	0xdecdce02	0x029dacc5	0x95c52292
++	0x0dfaa257	0x7150527a	0x0b59ab84	0x3a915b26
++	0x2624fe20	0x46309564	0x704261ba	0xdf434f92
++	0x2eb248c1	0x26d555d7	0xc75d81f5	0xbd0185b8
++	0xf53b1298	0x059b9353	0x7821a25e	0x4d7fe1cc
++	0x811b5179	0xe42e22a9	0x4fb78808	0xd6841c31
++	0xd9edb88a	0x9b433474	0x1c54ca12	0x4887f63d
++	0xf1b21006	0x8f7761fe	0x62a15331	0x6b35788c
++	0x4a5a9edf	0xfdee39c8	0xed95d818	0xe087b392
++	0xcdc89907	0x5ee58605	0xd4d7290b	0x46f8d2ce
++	0x6c9c3f65	0xd129f26e	0xd8cd5b87	0x2bc19529
++	0x7ab5b036	0xc44a6fbf	0x76fb68b1	0x6bffe654
++	0x482067f6	0xf8ed9d43	0xdad6bd63	0xa9ac77a2
++	0x76e6c089	0xe24ba46c	0x420ccbe3	0xfb09b718
++	0x83ec3694	0xf76e47d9	0x5f3a8859	0xe85f7fcd
++	0x61f1d09a	0x35065817	0x88bf5c6b	0xfbb9f76d
++	0x8b68fca3	0xed95dcb5	0xc2ff7cf1	0x855a2958
++	0xf7d28d92	0xb61802f7	0xf9814028	0xac8703c5
++	0x4ce8c7cd	0x1876cfe3	0x851c045a	0x56b3d146
++	0xe7abf1e7	0xdc46d720	0xd1e35c3a	0x2243ff60
++	0xc257c828	0x16513009	0xcb797d5d	0xe0f2cb11
++	0xf7e40b66	0x721e0495	0xce72e9b7	0x32eeedcf
++	0xf5dc5e01	0x355de93e	0xc20ad627	0x95aa436a
++	0xe69cab2b	0x511fef1c	0x18522a80	0x203e240f
++	0x882fb1f6	0xfed4db9a	0xa4bf7193	0x420df144
++	0x84791341	0xdb4767a1	0x8c0b40fb	0xcfa5c5d2
++	0x2783cad4	0xcf8dd48c	0x051037a0	0xc2994140
++	0xaf2a0a2e	0x29619774	0xffd83edd	0x1e346b24
++	0xb058a539	0x8118011a	0xb1722fcf	0x4f89c7b1
++	0x0e6f2f4b	0xdb155d1d	0x21d21cf9	0x25ba315b
++	0x7a17b541	0x3f23c32b	0x301e0881	0x9b0ad7f7
++	0x8adfccee	0x6c2f2975	0xbc9c318d	0x8d220d3b
++	0x33d2d0c1	0x5bc2dbf5	0xe0290856	0xedd38c75
++	0x56642fea	0xf7f5609b	0x5bdb0058	0x511dfc07
++	0xc6b0b515	0xeac6f4af	0x7da3a898	0x50452011
++	0x4668042b	0x4055890e	0x7bd41459	0x9b98f96a
++	0xc516cb64	0x15313f77	0x04f6816a	0xd622931a
++	0xbe2be61e	0xd549a421	0x380373c2	0xabb7123d
++	0xc54b9d3b	0x5a130630	0xafff90c4	0x50f5b4ce
++	0x75b0ecf0	0x16078950	0x44d547f1	0x8353af66
++	0x587bb496	0xf8f3c68a	0xd3b06119	0xef05594d
++	0xd403c928	0xf12b06bf	0x2b78eb2d	0x7de9106d
++	0x4966726e	0xa8b5ef1a	0x1c42a3f6	0xd55aa69b
++	0xe409c51f	0x93533259	0xc6d9dbf5	0xb4d63a17
++	0xaaf73aaa	0xe485f5d5	0x753f0d34	0x1a3e6dde
++	0x41183e36	0x2ec20e27	0x6b66bead	0xfc5f1d42
++	0xfecdf91f	0xb7066b78	0x8ed6da1c	0xbbeb87d7
++	0x8a72de9b	0x1e0e2f97	0xc377f532	0xedbdeb81
++	0x0f5b9e33	0x6ae7ebf2	0xca7440df	0xe9c3eefd
++	0x4bd50433	0xc25a6b95	0x9d2bd1e2	0x70709639
++	0x9050c202	0x7cbd2f1d	0x41443fa5	0x63dd89b1
++	0xb2607a0e	0x88c1417d	0x1631dbb0	0x13508ae3
++	0x4e78d90c	0x19811ae0	0x4bc827fb	0x459a55aa
++	0x52c0fd8d	0x8359500c	0x6a886312	0xbe704e33
++	0x441b7c24	0x5121c79c	0x86066830	0x1a0d013f
++	0xe78bfa0b	0x3f9e3ffc	0x7b3abb16	0xfc24b9ee
++	0x4f543a26	0x0619ad49	0x6a20077e	0xc8191371
++	0xd1d2876f	0x8b83645d	0x48330de1	0xe132ea1a
++	0xdc077f5a	0xfd14dd79	0xf606c198	0xec47c478
++	0x17c3f14f	0x334fd708	0xe39cf072	0x39f543c2
++	0xebab93a2	0xf7febed4	0x79971f6b	0x888858d4
++	0xdfd11199	0xafe72dfa	0x13f30ff8	0x6141ada3
++	0x5fe75eb0	0x75dcecd6	0x70fb1b33	0x073f9823
++	0x7afb726d	0x04b10ea5	0x6c881a5b	0x945a5c69
++	0x2ecb950a	0xb384f045	0xe5eb9ac8	0xa46dfd3b
++	0xb8185584	0xc095b417	0x86173c80	0x6a509180
++	0x4eddcc32	0xf408ac80	0x0833ae99	0x58ca79b2
++	0x2eac5d79	0x85c2deb7	0x400e6a01	0xdc6caa56
++	0x706176e7	0xa5dadc8f	0x0d4969de	0x259553d9
++	0x52425195	0x7d074da3	0x784ef596	0x8580e28c
++	0xbaa52874	0x71abf00e	0x8434cb32	0xc3a8ffe2
++	0x6ec52581	0xa4cd744f	0xd5820757	0x7e257e4d
++	0xb7428f60	0xb55fd824	0xd454c529	0x8de72e07
++	0xf84abcb4	0x30b7c926	0x5140a1d2	0x4e9550c6
++	0x18826ed6	0xf561a8eb	0x28c7cde6	0xe91022ea
++	0x73cdc0ef	0x32bea752	0xc7a0138d	0xa0af6cd3
++	0x52c4736d	0x0b459241	0x2156a8d8	0x0d32a2ad
++	0x49bb6600	0x8752c2bd	0x45d0a0ec	0xc89f9bc3
++	0x76d775a6	0x963f0a6b	0xb5d100fc	0x2731528b
++	0x2719d1a1	0x2b201af5	0xc337ea7b	0x70ce1c8f
++	0x8cb21437	0x9869038c	0x53e9458e	0x624904e5
++	0xcb7cdad7	0x13b9bba7	0xc66ec1ae	0x86bbb14d
++	0x018c25ad	0x88573452	0x4165b4bd	0xa719f640
++	0xd4b8227a	0xdace857f	0x701c449e	0xa835c09e
++	0xef8e4608	0x72ec0d91	0xe88703ac	0xb6470c3d
++	0x0cae0aff	0xae650f6c	0x384c382e	0x5d4b6275
++	0x6691c449	0xfba67785	0xe3a5b7b7	0xfb72c85e
++	0x09056be6	0x15e28bd0	0xb6be7e9e	0xd97fac13
++	0x1e6023bc	0x0f28cfbd	0x840eeee5	0xd208ac51
++	0x12b36d98	0xd28885de	0x108c3e86	0xff2ae965
++	0x09b446c4	0xe453ba28	0x42c997ac	0x880e22f3
++	0x0eeee913	0x5a0c9803	0xf080f33c	0x47e99f76
++	0xa62e02f6	0x38283513	0x5ecad92f	0xaef2a1eb
++	0xa5cdc2c5	0xd5e6ae58	0x03dbffd9	0xc24ddb4f
++	0xaaeecc9d	0xdbeb2dfc	0xfda7e5a0	0x8e537029
++	0x8ae38058	0xfce24682	0xcdd46b74	0x0cc2b384
++	0x89cd2e8b	0xe955abd6	0x82c64f39	0x716c7713
++	0x70dbaa6c	0x271b7a9c	0x332e6234	0x8d081fed
++	0xb47ac8d3	0x818af259	0x6d97d09f	0x7aaca213
++	0x2124cd22	0x70fc4cbc	0x02988745	0x29e28390
++	0x2b11e888	0xe62b3826	0x8c6260e9	0x2b2d9036
++	0xc3cd85c3	0x3a08e1a7	0xf406364f	0x6ff5f0d9
++	0xc0c2a847	0x076cac4b	0x85eea1ab	0xbe6d6dbc
++	0xdffbd36d	0xf1bb8934	0xae696cac	0xfe51475b
++	0x6bce710a	0x83d6ff0d	0x44cb120f	0xd0c01d5a
++	0x997f8469	0xdaad8626	0xdff160f7	0xf2954b72
++	0xd4efa312	0x07035ee6	0x03e8dbb0	0x5a33d382
++	0xc6527dc6	0x0b7391a3	0xfe568e01	0x24c28c70
++	0x76e65ea0	0xeafaf171	0x1ab4ebfa	0x4ff66462
++	0xc9949824	0x776d25fe	0x3689d8f9	0x1ec65a2c
++	0x746581f5	0x227209d2	0xbff7bc69	0x91b4c927
++	0x171c5962	0xb4dd5f85	0x72e4917a	0xd01ff1af
++	0x9c6ba703	0xdb9d9be6	0xae1cf2c5	0x48b85c21
++	0x9628b693	0xa8d2e2f7	0x856584db	0x1b33821e
++	0xff5de311	0x4126d04c	0xf00ac027	0x54bdaa98
++	0xa3dd5b0a	0xce2b2558	0xea5f50d8	0xb2e88f18
++	0x19590981	0x6dae2c0a	0xbfd758bc	0x2897e93c
++	0x3ba5d054	0x2d809b4c	0x3de6aa52	0xea171509
++	0x7d8b7b44	0x19a1ad1c	0xe99b2657	0x98ac56e9
++	0xc2150187	0x63a12506	0x4ffc1739	0x50e2ca6c
++	0x4f2ff10c	0xb7323ff6	0x81d9f57a	0x5146beee
++	0xa1f45456	0xf6ce5d75	0xdff7be9a	0x75ab2dc9
++	0x5ff2901a	0xec756ab3	0x8a5e0299	0xc4e248ce
++	0x248502e8	0xd8c62cf1	0xc7001b23	0xf7c636d2
++	0xefbb67e1	0xec507025	0x1820ac19	0x39e1624c
++	0x4ee603b2	0xb70e1c67	0xaf9376fc	0x371af05b
++	0xa19209fe	0x8ecdf499	0x9a607cb2	0xcbe61a2c
++	0x9f4e950c	0xb9a1546f	0xe718f140	0xc75d5d02
++	0xabe66af2	0xecc54d7b	0xb4373489	0x22254496
++	0x4b4b7f7c	0x40dde60e	0xfe621a3e	0xa6605c67
++	0x5cf6a3a2	0x75df88a3	0xbf0749b0	0x705a0a04
++	0xf3cae078	0x392bdebd	0x98878e65	0x0f5a2be5
++	0xec172835	0xf610cc90	0xac6ff369	0x0a71c173
++	0x8eae2d62	0x2ccbb630	0xd3b702ea	0x1626bfff
++	0xdb4a6975	0xd2a936f7	0x0bb63194	0x5d9120dd
++	0x5860e04e	0x3baeca91	0x95a621db	0xa6d23aaf
++	0xfebcfa2d	0xa5ed89cf	0x2192280a	0x72322cb8
++	0xd79e14d2	0x0528ce06	0x1c6a8f9c	0x6703407c
++	0x93819694	0x6c554390	0x7875452a	0xf45d2757
++	0xe0458d1d	0x335f6179	0x48989cc9	0xdc16cec8
++	0x9e2c0ee5	0x78daabe2	0x2069e8eb	0x0e87f238
++	0x0a928dda	0xc66e14b3	0x2a6c4031	0x73821630
++	0x8b8c4a40	0x243702b7	0xded80901	0x5de34802
++	0xea029b73	0x59a47771	0xe747d796	0xe80aea8d
++	0x0bd01815	0x76fe1f68	0xa345fc34	0x73737383
++	0x76753b6c	0x57dcba56	0xb11d6b21	0x81dc371e
++	0x311f4ea0	0x3b4b2522	0xe8a66ef4	0x1932df0c
++	0x9f3790d6	0x0d0478a3	0x7dd0a24b	0xeb581381
++	0x6fe8ff06	0xe34c2d69	0x26842e15	0xe9a39562
++	0x78f2d7d1	0x79ab33f5	0x197df69c	0x38a9a004
++	0x9391dba9	0xfbb4b7c5	0xa97bb70f	0x0720b57b
++	0xd9b26325	0x3ed1a3fc	0x11f5aba0	0x6e6a53ef
++	0xe2ce236e	0x30994468	0x9d4369cd	0xcb6b5b5c
++	0x61a0945c	0x090e7dea	0x5d9b676a	0xd474cb52
++	0x8ebf1af3	0x35f2a70b	0x417d48a0	0x45062dcc
++	0x841d8d90	0x30f8e590	0x1c935ad3	0x29313e0c
++	0x46ecf673	0x4998b596	0x95f23529	0xf31bd581
++	0x1b32045a	0x90432d28	0xa2a6c268	0xbf40fcae
++	0x4104b314	0x02677221	0xa99231ac	0xe28abada
++	0xd7d72a73	0xf1b2ce4c	0xf753f8be	0x9d7fc1c7
++	0x9a0e7a7a	0xf04ccf32	0x58433f5f	0xab9a6d51
++	0x71262b1c	0x48f84d91	0x897670bb	0x47dd10cb
++	0xac7ef74d	0x78dc3e54	0x30b17eaa	0xc8f46618
++	0xc636fe3b	0x86ac06e3	0xfb8edd16	0xed357170
++	0xbfd34bf8	0xaeb9571a	0x4eec6a50	0xe881a1b7
++	0x8a1cbbde	0xc6c077b6	0xaeda1441	0xf990296a
++	0xc91e87d6	0xad0ca921	0x855537b6	0xfc0da57d
++	0xf8427d87	0x9ece7413	0xc5d4b4c9	0x2fca7822
++	0xa1888443	0xd3bf617e	0xab21ce7d	0xe63b5f53
++	0x828501c5	0x81a39da9	0xb8cfb4c6	0x6b23b8dc
++	0x853fe425	0xba262321	0x34f11b05	0x8044aea4
++	0x67a3f99d	0x51e8afb7	0x04efcf27	0x7773f9ff
++	0x8abceec1	0xd75d87a2	0x7e30d774	0xdd7a42f2
++	0x2ca6ad73	0x27d4e62f	0xbc228d26	0x035a7713
++	0x5dbcc13a	0x792a97da	0x56cf9fc2	0x5906fa3e
++	0x97a3147c	0x85e59863	0x19ad1f49	0x1af659a8
++	0xddc6a273	0xd254a195	0x44d83a00	0x3b7c5fa7
++	0xcaf756aa	0x68ad08b9	0xfc57da12	0x3b278f24
++	0xbd165574	0x3cf597ca	0xdeb872ba	0x543eb2f5
++	0xfabc0d4f	0x0799c544	0x3d71181d	0x22c8a598
++	0xb82840fc	0x1a198d19	0xf529a0ea	0x2f65bc24
++	0xe979f99d	0xff8617b4	0x376e5abb	0xb095a03e
++	0xa36b1107	0x2dacf004	0xe4c565e1	0xc96463cd
++	0x3b495e2d	0x4a2c2cd7	0xa0053fc2	0x6c82a085
++	0x6b801c45	0xc1481d77	0x6d95dc15	0x44dc8bf6
++	0x3eed7d25	0x901a6b49	0x2797e953	0x502ad2c3
++	0x8491c3f2	0x3ce059eb	0x992c1a76	0x6c56d2a2
++	0xcf1878a7	0x10574487	0x5a2f85e6	0xf94e418e
++	0x4c149aed	0x9381b5a3	0x79c90da4	0x635e696e
++	0x243073ba	0x67504105	0xe82ac957	0xaccda7b3
++	0x29bdd624	0xd0c1533c	0xbc080065	0x8d617329
++	0x27e6f74a	0x31e87692	0x50a3857d	0xc5b1ec3f
++	0x4f03be5f	0xa35fde17	0x537a59bb	0x793d1eb5
++	0xc11a0588	0x067e5593	0x102532c3	0x4024b312
++	0x32504cf4	0x4ddc0e9a	0xad5b1d24	0x41081874
++	0xf94fced4	0x16f39da6	0x9bdfbe58	0xc5615db4
++	0x1fdd769d	0x4278b52e	0x4525b8b6	0x7feed258
++	0xe0b4348b	0xb4925ccc	0x5547cc88	0x3f7f5443
++	0x5b8cc6d3	0xbe6a15cf	0x7308c088	0xde4219df
++	0x4685593c	0xc4ae83a3	0xaea72ff0	0x403b0c08
++	0xe533a9aa	0xed46be76	0x4390bcd0	0x683a9f3f
++	0x338b5cd3	0x7cd59689	0x2eb11aec	0x74e91cfd
++	0x7ae588aa	0x0eadf94e	0x30a6b42f	0x1965f165
++	0xd96de54b	0x06c85abf	0x1bbc0ab8	0x79f3ddd0
++	0x871fd58d	0x498dd69d	0x9197dd0e	0x6cbb3a4f
++	0x8a1f2a01	0x0d9cf747	0x80e66655	0x770d2b25
++	0x567bd3eb	0x59583c5a	0x58afeddd	0x9296d0e3
++	0xcf5af62c	0xf48b4c78	0x746f657e	0xe543b903
++	0x24603809	0xd1bceeea	0x16d04950	0x2a7c754b
++	0x4ea8bb99	0x9daecb97	0x3045b9a9	0x4a3e84d9
++	0x5487e79f	0xd6145e57	0xc3b17f6f	0x14448bb6
++	0x8e8529f5	0xf895acb9	0x6605c0f0	0x52d00ca9
++	0xabf6e3e9	0x8f36e307	0xa7a15442	0x55144801
++	0x69b028b2	0x8ab3b912	0xb493f80e	0x2dc9fdfa
++	0x1b091fbf	0x1bce6b31	0x79eb414e	0xe5f86ea0
++	0x39ef7dbd	0x2f86faf0	0xec366923	0xe770c7be
++	0x74e4aa61	0xef3b9da0	0xd77bd8be	0xfd13d3cb
++	0x4e8023c6	0x3d993904	0xfcb2f700	0xa14b753b
++	0xde16c1c3	0x983c5a86	0x52ba5e61	0x1d67b044
++	0x0f9a302d	0x2f13b653	0x769cbb97	0xea3e1cbd
++	0x5791778c	0x540fcff1	0x5e6c53f2	0xc9cbac0f
++	0x40ceadf0	0x648713d3	0xb5347ada	0xfe280079
++	0xb8389f3f	0x5a6be26a	0x8e683d28	0x6a3e8e3a
++	0x97ecac7a	0x70b648f1	0xe4eca20e	0x088cd0b4
++	0xbad30405	0x0f77e382	0x673cdf65	0x438af1f0
++	0x0b4f4eea	0xf0cc34e9	0x374a3c04	0x4370d27d
++	0xc3e1e84d	0x141205c2	0xfa831e8d	0x32f2f10a
++	0x77899366	0xc9d07590	0x9b6f2286	0xcac96a03
++	0xf822808b	0x265606cd	0xbeef275d	0x73415b15
++	0x4c87250e	0xf95a8c8a	0xdc8d6166	0x68522e63
++	0xb9becc14	0x7b5f20be	0x3d158dab	0xa73b1716
++	0x3b2cac15	0xf0498939	0xb60653bf	0x33fafc0e
++	0x3b416955	0x3addca50	0x16ab21cf	0xd18cbdb6
++	0x3b29b87b	0xa6fb7e4b	0x6634147f	0x44283b1e
++	0x430ae726	0xa907ab82	0x2baa6706	0x621d2390
++	0x15944559	0x2516c807	0x7d1eeb61	0xe2714121
++	0x288d3998	0x47713cbb	0xa1ce3c1e	0x0c29b6dd
++	0x9923131c	0x2dd19cfa	0x83d0ece5	0x78474c7b
++	0x92dee4f0	0xba5cb0f7	0x780c1d41	0x50da5a89
++	0xe303cebb	0xe8d5a2bd	0x7d6269a9	0xb75484f1
++	0x33ee8186	0x085b7657	0x7b1c7863	0xdb1a43ce
++	0x3d0c4bf0	0x302c1292	0x81e42216	0xee1f2c9d
++	0x822451ab	0xcefd8067	0x8330dc41	0x14492542
++	0xf038f54d	0x90a1abf9	0xc3067a77	0x40d9a42c
++	0x127285c1	0x80ad15ff	0xaf4854e2	0xa47874f4
++	0x2ed59760	0x67252c6a	0xe2830f38	0x8150c00c
++	0x16f61cca	0x1331f815	0x2d832d17	0x163c6010
++	0x69464e2f	0x99940411	0xbce5e85f	0x43d39ef2
++	0x9b7224dc	0x28652b6d	0x331a7632	0x127f669e
++	0x44a034ad	0xe95d2cec	0x3d83fefb	0xfa6d40a2
++	0x9b535bf4	0xc83411ce	0xd661655b	0x64bcd8d2
++	0xd99e1570	0x7dc4d877	0x9756b210	0x7623dc0d
++	0x484dd33f	0xe7bca204	0xa06efbc5	0xa358c03f
++	0x362cb282	0xe40e6d04	0x17ab9f5e	0x79a71a09
++	0x804bf1a9	0x6bca7d73	0x5504a4ff	0xd3946f75
++	0x18b0b9d4	0xd85993cc	0x94d000a5	0x8dda1609
++	0x30afb8f6	0xb3c99c3c	0x7686d59d	0x68b719db
++	0xdc7b3edb	0xedb76012	0xbfa0ba3b	0x280b829d
++	0x72fcf1aa	0xe3d8f83c	0x088a57cf	0x95156217
++	0x3306eb47	0x1d09cf54	0x1391876f	0x5b15ecde
++	0xb46104e1	0x8d8f2593	0x90ee50cc	0x78dad4b2
++	0xfd96daee	0xdbf15e95	0xfc859faa	0xdb4422a5
++	0xa00eeab6	0x525232c6	0x9b665668	0x8a70518b
++	0xbb27f7ac	0xb066b096	0x25754db6	0xe8c7d748
++	0xd4e8d361	0x380dd246	0x9bdf15e6	0x6823c660
++	0x5d408fe7	0xe59a5a89	0x1eb7523b	0x4997158e
++	0xfa6214d2	0x03b35025	0x9aeff33c	0x20a38aad
++	0x522f79cd	0x4141f19c	0xc58cd2bd	0xc816da37
++	0x62c6f8d9	0xc15ea9f4	0x138d1f45	0xd36cef03
++	0x88183bd6	0xe0de9036	0xefcbe8fc	0x5ebdce26
++	0x9e83b01b	0xd35f6747	0x552951f1	0x4e20dd66
++	0x419702b1	0x45446e7c	0x7ce5616b	0x6152e3a8
++	0xffd572e1	0x4fab25b0	0x07563b80	0x98720ee7
++	0x176d29bf	0x21cbd730	0xbde74431	0x09a8cce2
++	0xc15e548e	0xe6a92b4b	0x14f17e74	0x75f7817b
++	0x592143e8	0x113dbd25	0x5f7d7160	0xbdd8b1e0
++	0x6ce045e5	0x53b27b2d	0x371c8aa8	0xa4da8be0
++	0xf1f6df4e	0x9519bac4	0x6d6169cf	0x7846253f
++	0xccb95d95	0x6ad11a98	0x4a3bd21d	0x5389f44c
++	0x7c07ef3a	0xb983ca57	0xcf7f290d	0x4ec516f1
++	0xa7711e70	0x818d45a9	0x49db6441	0xd032fc2a
++	0x657df4d3	0xe37e6809	0x459a22da	0x41df8aa5
++	0x462108a6	0x65177d27	0x1ddffa9f	0x7fa6631b
++	0xdd7a414c	0x6351f0d1	0x1b38a419	0x6b529c8e
++	0x167745e4	0xcac35897	0x3d7bf419	0xd59ed67a
++	0x6486b2c9	0x9ae4fc90	0x8f608920	0xd35335c0
++	0x8f113cba	0x0fcc11a1	0xdc180fbf	0x57a99319
++	0x2c54185f	0x764c18d0	0x4f84b111	0x30a11040
++	0xd15620af	0x496af145	0x263b2de2	0x3ff103dd
++	0x38484dac	0xf143a3bc	0xb62c0de6	0xb122c545
++	0x72f10466	0x63728442	0xee0117c9	0x2309f14b
++	0x4ccdd5de	0x37ae022d	0x2ee7f050	0xf2aa9af6
++	0xcd314a20	0x86954941	0x97215303	0xcd7e1687
++	0x1dab6672	0x1c920209	0x41102dae	0x8b21c8ab
++	0x6f70b04b	0x2988b209	0x86e6f033	0x5eb91718
++	0x925b3c40	0xdcad0288	0x0ee98331	0xc3096ceb
++	0x9fa04740	0x3ce3fb23	0x90d75cbd	0xeab21768
++	0xaca5db0a	0x1c440578	0x762cb728	0x315a699f
++	0xcd2b6490	0x11e3e267	0xa10d1bbc	0x23ac26d3
++	0xc0c7c268	0x37ecf7ac	0x28de6fe5	0x6fb8e3e8
++	0x583d1131	0x8370812a	0x3afd5d58	0x4569a06e
++	0xf27ad86f	0x0db6a631	0x9add5128	0x1748c9fd
++	0xc46e3c57	0x4c0df93e	0xc595c544	0x397f7e7e
++	0x241f4086	0x7d7ed51b	0x56027473	0x656a6110
++	0x970a8011	0xf9c7beb5	0xc6cb9957	0xb7426461
++	0x62d3d89d	0xf99d48ca	0x3e4d4a88	0x9f751b71
++	0xfa020205	0xa3124337	0x59935869	0x98c58314
++	0xff7c4385	0x69191265	0xaf85ebb9	0xe434cda2
++	0xb1ad3e0e	0x221d32e1	0x022d73a0	0xd676ce06
++	0xab7f0c21	0x915c2444	0xf5bdaba2	0x74e4e789
++	0x11ff0d95	0x58c53feb	0xa54eb847	0x9af982ae
++	0x8d721596	0x73510fe4	0x95e3bd19	0xd82f8359
++	0xc09cdd5b	0xc07f57a4	0xbece605b	0xa8a43c5b
++	0x0acbeb6d	0x3c5cd8ce	0xb631050d	0xd558c921
++	0xcb5054c2	0xefb06252	0x40d2e2cc	0x14ffe6ff
++	0x761001a9	0xad64e7a5	0xb55618b4	0x2a40a1fc
++	0x2cbe6d40	0x2bc18fc1	0x196e7092	0x3c137791
++	0xa799eb23	0x1156feb9	0xd55d7ed1	0x0149c315
++	0xae77081f	0xfe724690	0x55ed2fd7	0x04b18cd7
++	0x691583f4	0xb1be4fde	0x19ae1cf7	0x3250140b
++	0x35daeeb2	0xc9459a84	0xea2c19e1	0x57f8c9cb
++	0xe05e07a4	0xcc77a363	0x43afd702	0x48305862
++	0x6c4b459f	0x66ed6178	0x26be9f81	0xeac41ee5
++	0xbe5e2e6b	0x177f9068	0xede56c48	0x438b3811
++	0xd5bd7ee4	0xc027d1a8	0xc1c0f725	0x48d4d4eb
++	0x6ffa28d5	0xbd6ac9eb	0xd497781d	0x24d3a154
++	0x409bb5c0	0x8079bf76	0x90a522dc	0x19bf7033
++	0x1a529b6e	0xe5207e4d	0x3d49b7bc	0x3eca6d54
++	0xa37681a6	0xaa9a62e4	0xe54aa1e1	0xb91e7157
++	0x8cce8f65	0xbcbbd62c	0x7fa477b5	0x44f46b50
++	0x54263fcf	0x529cbb5d	0x8923e390	0x0778d6d7
++	0x0cc0503f	0x02c374ce	0xb89c3e5c	0x25b1b353
++	0xb227cb2d	0x44108698	0x5e5968c2	0x82c48632
++	0x0b8f4209	0x1a241879	0x9edca6f1	0xa1fa51ab
++	0x206db0c6	0xbfbbbe98	0xa71c91f6	0xa1b28056
++	0xb8bfaaa9	0xa5914f75	0x77d26574	0xacfd459d
++	0x77f7cab2	0x249ebf26	0xef902bdd	0x77f6e48d
++	0x82497035	0x93333a9d	0x34ea9953	0x8f08d41c
++	>;
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-coreboot/gpio.h u-boot/arch/x86/include/asm/arch-coreboot/gpio.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-coreboot/gpio.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-coreboot/gpio.h	2015-01-01 17:34:32.253503252 +0100
+@@ -7,4 +7,7 @@
+ #ifndef _X86_ARCH_GPIO_H_
+ #define _X86_ARCH_GPIO_H_
+ 
++/* Where in config space is the register that points to the GPIO registers? */
++#define PCI_CFG_GPIOBASE 0x48
++
+ #endif /* _X86_ARCH_GPIO_H_ */
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/gpio.h u-boot/arch/x86/include/asm/arch-ivybridge/gpio.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/gpio.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-ivybridge/gpio.h	2015-01-01 17:34:32.253503252 +0100
+@@ -7,4 +7,7 @@
+ #ifndef _X86_ARCH_GPIO_H_
+ #define _X86_ARCH_GPIO_H_
+ 
++/* Where in config space is the register that points to the GPIO registers? */
++#define PCI_CFG_GPIOBASE 0x48
++
+ #endif /* _X86_ARCH_GPIO_H_ */
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/pei_data.h u-boot/arch/x86/include/asm/arch-ivybridge/pei_data.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-ivybridge/pei_data.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-ivybridge/pei_data.h	2015-01-01 17:34:32.253503252 +0100
+@@ -7,6 +7,8 @@
+ #ifndef ASM_ARCH_PEI_DATA_H
+ #define ASM_ARCH_PEI_DATA_H
+ 
++#include <linux/linkage.h>
++
+ struct pch_usb3_controller_settings {
+ 	/* 0: Disable, 1: Enable, 2: Auto, 3: Smart Auto */
+ 	uint16_t mode;
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#ifndef __FSP_API_H__
++#define __FSP_API_H__
++
++/*
++ * FspInit continuation function prototype.
++ * Control will be returned to this callback function after FspInit API call.
++ */
++typedef void (*fsp_continuation_f)(u32 status, void *hob_list);
++
++struct fsp_init_params {
++	/* Non-volatile storage buffer pointer */
++	void			*nvs_buf;
++	/* Runtime buffer pointer */
++	void			*rt_buf;
++	/* Continuation function address */
++	fsp_continuation_f	continuation;
++};
++
++struct common_buf {
++	/*
++	 * Stack top pointer used by the bootloader. The new stack frame will be
++	 * set up at this location after FspInit API call.
++	 */
++	u32	*stack_top;
++	u32	boot_mode;	/* Current system boot mode */
++	void	*upd_data;	/* User platform configuraiton data region */
++	u32	reserved[7];	/* Reserved */
++};
++
++enum fsp_phase {
++	/* Notification code for post PCI enuermation */
++	INIT_PHASE_PCI	= 0x20,
++	/* Notification code before transfering control to the payload */
++	INIT_PHASE_BOOT	= 0x40
++};
++
++struct fsp_notify_params {
++	/* Notification phase used for NotifyPhase API */
++	enum fsp_phase	phase;
++};
++
++/* FspInit API function prototype */
++typedef u32 (*fsp_init_f)(struct fsp_init_params *params);
++
++/* FspNotify API function prototype */
++typedef u32 (*fsp_notify_f)(struct fsp_notify_params *params);
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,24 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#ifndef __FSP_BOOT_MODE_H__
++#define __FSP_BOOT_MODE_H__
++
++/* 0x21 - 0xf..f are reserved */
++#define BOOT_FULL_CONFIG		0x00
++#define BOOT_MINIMAL_CONFIG		0x01
++#define BOOT_NO_CONFIG_CHANGES		0x02
++#define BOOT_FULL_CONFIG_PLUS_DIAG	0x03
++#define BOOT_DEFAULT_SETTINGS		0x04
++#define BOOT_ON_S4_RESUME		0x05
++#define BOOT_ON_S5_RESUME		0x06
++#define BOOT_ON_S2_RESUME		0x10
++#define BOOT_ON_S3_RESUME		0x11
++#define BOOT_ON_FLASH_UPDATE		0x12
++#define BOOT_IN_RECOVERY_MODE		0x20
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,154 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#ifndef __FSP_FFS_H__
++#define __FSP_FFS_H__
++
++/* Used to verify the integrity of the file */
++union __packed ffs_integrity {
++	struct {
++		/*
++		 * The IntegrityCheck.checksum.header field is an 8-bit
++		 * checksum of the file header. The State and
++		 * IntegrityCheck.checksum.file fields are assumed to be zero
++		 * and the checksum is calculated such that the entire header
++		 * sums to zero.
++		 */
++		u8	header;
++		/*
++		 * If the FFS_ATTRIB_CHECKSUM (see definition below) bit of
++		 * the Attributes field is set to one, the
++		 * IntegrityCheck.checksum.file field is an 8-bit checksum of
++		 * the file data. If the FFS_ATTRIB_CHECKSUM bit of the
++		 * Attributes field is cleared to zero, the
++		 * IntegrityCheck.checksum.file field must be initialized with
++		 * a value of 0xAA. The IntegrityCheck.checksum.file field is
++		 * valid any time the EFI_FILE_DATA_VALID bit is set in the
++		 * State field.
++		 */
++		u8	file;
++	} checksum;
++
++	/* This is the full 16 bits of the IntegrityCheck field */
++	u16	checksum16;
++};
++
++/*
++ * Each file begins with the header that describe the
++ * contents and state of the files.
++ */
++struct __packed ffs_file_header {
++	/*
++	 * This GUID is the file name.
++	 * It is used to uniquely identify the file.
++	 */
++	struct efi_guid		name;
++	/* Used to verify the integrity of the file */
++	union ffs_integrity	integrity;
++	/* Identifies the type of file */
++	u8			type;
++	/* Declares various file attribute bits */
++	u8			attr;
++	/* The length of the file in bytes, including the FFS header */
++	u8			size[3];
++	/*
++	 * Used to track the state of the file throughout the life of
++	 * the file from creation to deletion.
++	 */
++	u8			state;
++};
++
++struct __packed ffs_file_header2 {
++	/*
++	 * This GUID is the file name. It is used to uniquely identify the file.
++	 * There may be only one instance of a file with the file name GUID of
++	 * Name in any given firmware volume, except if the file type is
++	 * EFI_FV_FILE_TYPE_FFS_PAD.
++	 */
++	struct efi_guid		name;
++	/* Used to verify the integrity of the file */
++	union ffs_integrity	integrity;
++	/* Identifies the type of file */
++	u8			type;
++	/* Declares various file attribute bits */
++	u8			attr;
++	/*
++	 * The length of the file in bytes, including the FFS header.
++	 * The length of the file data is either
++	 * (size - sizeof(struct ffs_file_header)). This calculation means a
++	 * zero-length file has a size of 24 bytes, which is
++	 * sizeof(struct ffs_file_header). Size is not required to be a
++	 * multiple of 8 bytes. Given a file F, the next file header is located
++	 * at the next 8-byte aligned firmware volume offset following the last
++	 * byte of the file F.
++	 */
++	u8			size[3];
++	/*
++	 * Used to track the state of the file throughout the life of
++	 * the file from creation to deletion.
++	 */
++	u8			state;
++	/*
++	 * If FFS_ATTRIB_LARGE_FILE is set in attr, then ext_size exists
++	 * and size must be set to zero.
++	 * If FFS_ATTRIB_LARGE_FILE is not set then
++	 * struct ffs_file_header is used.
++	 */
++	u32			ext_size;
++};
++
++/*
++ * Pseudo type. It is used as a wild card when retrieving sections.
++ * The section type EFI_SECTION_ALL matches all section types.
++ */
++#define EFI_SECTION_ALL				0x00
++
++/* Encapsulation section Type values */
++#define EFI_SECTION_COMPRESSION			0x01
++#define EFI_SECTION_GUID_DEFINED		0x02
++#define EFI_SECTION_DISPOSABLE			0x03
++
++/* Leaf section Type values */
++#define EFI_SECTION_PE32			0x10
++#define EFI_SECTION_PIC				0x11
++#define EFI_SECTION_TE				0x12
++#define EFI_SECTION_DXE_DEPEX			0x13
++#define EFI_SECTION_VERSION			0x14
++#define EFI_SECTION_USER_INTERFACE		0x15
++#define EFI_SECTION_COMPATIBILITY16		0x16
++#define EFI_SECTION_FIRMWARE_VOLUME_IMAGE	0x17
++#define EFI_SECTION_FREEFORM_SUBTYPE_GUID	0x18
++#define EFI_SECTION_RAW				0x19
++#define EFI_SECTION_PEI_DEPEX			0x1B
++#define EFI_SECTION_SMM_DEPEX			0x1C
++
++/* Common section header */
++struct __packed raw_section {
++	/*
++	 * A 24-bit unsigned integer that contains the total size of
++	 * the section in bytes, including the EFI_COMMON_SECTION_HEADER.
++	 */
++	u8	size[3];
++	u8	type;
++};
++
++struct __packed raw_section2 {
++	/*
++	 * A 24-bit unsigned integer that contains the total size of
++	 * the section in bytes, including the EFI_COMMON_SECTION_HEADER.
++	 */
++	u8	size[3];
++	u8	type;
++	/*
++	 * If size is 0xFFFFFF, then ext_size contains the size of
++	 * the section. If size is not equal to 0xFFFFFF, then this
++	 * field does not exist.
++	 */
++	u32	ext_size;
++};
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,137 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#ifndef __FSP_FV___
++#define __FSP_FV___
++
++/* Value of EFI_FV_FILE_ATTRIBUTES */
++#define EFI_FV_FILE_ATTR_ALIGNMENT	0x0000001F
++#define EFI_FV_FILE_ATTR_FIXED		0x00000100
++#define EFI_FV_FILE_ATTR_MEMORY_MAPPED	0x00000200
++
++/* Attributes bit definitions */
++#define EFI_FVB2_READ_DISABLED_CAP	0x00000001
++#define EFI_FVB2_READ_ENABLED_CAP	0x00000002
++#define EFI_FVB2_READ_STATUS		0x00000004
++#define EFI_FVB2_WRITE_DISABLED_CAP	0x00000008
++#define EFI_FVB2_WRITE_ENABLED_CAP	0x00000010
++#define EFI_FVB2_WRITE_STATUS		0x00000020
++#define EFI_FVB2_LOCK_CAP		0x00000040
++#define EFI_FVB2_LOCK_STATUS		0x00000080
++#define EFI_FVB2_STICKY_WRITE		0x00000200
++#define EFI_FVB2_MEMORY_MAPPED		0x00000400
++#define EFI_FVB2_ERASE_POLARITY		0x00000800
++#define EFI_FVB2_READ_LOCK_CAP		0x00001000
++#define EFI_FVB2_READ_LOCK_STATUS	0x00002000
++#define EFI_FVB2_WRITE_LOCK_CAP		0x00004000
++#define EFI_FVB2_WRITE_LOCK_STATUS	0x00008000
++#define EFI_FVB2_ALIGNMENT		0x001F0000
++#define EFI_FVB2_ALIGNMENT_1		0x00000000
++#define EFI_FVB2_ALIGNMENT_2		0x00010000
++#define EFI_FVB2_ALIGNMENT_4		0x00020000
++#define EFI_FVB2_ALIGNMENT_8		0x00030000
++#define EFI_FVB2_ALIGNMENT_16		0x00040000
++#define EFI_FVB2_ALIGNMENT_32		0x00050000
++#define EFI_FVB2_ALIGNMENT_64		0x00060000
++#define EFI_FVB2_ALIGNMENT_128		0x00070000
++#define EFI_FVB2_ALIGNMENT_256		0x00080000
++#define EFI_FVB2_ALIGNMENT_512		0x00090000
++#define EFI_FVB2_ALIGNMENT_1K		0x000A0000
++#define EFI_FVB2_ALIGNMENT_2K		0x000B0000
++#define EFI_FVB2_ALIGNMENT_4K		0x000C0000
++#define EFI_FVB2_ALIGNMENT_8K		0x000D0000
++#define EFI_FVB2_ALIGNMENT_16K		0x000E0000
++#define EFI_FVB2_ALIGNMENT_32K		0x000F0000
++#define EFI_FVB2_ALIGNMENT_64K		0x00100000
++#define EFI_FVB2_ALIGNMENT_128K		0x00110000
++#define EFI_FVB2_ALIGNMENT_256K		0x00120000
++#define EFI_FVB2_ALIGNMENT_512K		0x00130000
++#define EFI_FVB2_ALIGNMENT_1M		0x00140000
++#define EFI_FVB2_ALIGNMENT_2M		0x00150000
++#define EFI_FVB2_ALIGNMENT_4M		0x00160000
++#define EFI_FVB2_ALIGNMENT_8M		0x00170000
++#define EFI_FVB2_ALIGNMENT_16M		0x00180000
++#define EFI_FVB2_ALIGNMENT_32M		0x00190000
++#define EFI_FVB2_ALIGNMENT_64M		0x001A0000
++#define EFI_FVB2_ALIGNMENT_128M		0x001B0000
++#define EFI_FVB2_ALIGNMENT_256M		0x001C0000
++#define EFI_FVB2_ALIGNMENT_512M		0x001D0000
++#define EFI_FVB2_ALIGNMENT_1G		0x001E0000
++#define EFI_FVB2_ALIGNMENT_2G		0x001F0000
++
++struct fv_blkmap_entry {
++	/* The number of sequential blocks which are of the same size */
++	u32	num_blocks;
++	/* The size of the blocks */
++	u32	length;
++};
++
++/* Describes the features and layout of the firmware volume */
++struct fv_header {
++	/*
++	 * The first 16 bytes are reserved to allow for the reset vector of
++	 * processors whose reset vector is at address 0.
++	 */
++	u8			zero_vec[16];
++	/*
++	 * Declares the file system with which the firmware volume
++	 * is formatted.
++	 */
++	struct efi_guid		fs_guid;
++	/*
++	 * Length in bytes of the complete firmware volume, including
++	 * the header.
++	 */
++	u64			fv_len;
++	/* Set to EFI_FVH_SIGNATURE */
++	u32			sign;
++	/*
++	 * Declares capabilities and power-on defaults for the firmware
++	 * volume.
++	 */
++	u32			attr;
++	/* Length in bytes of the complete firmware volume header */
++	u16			hdr_len;
++	/*
++	 * A 16-bit checksum of the firmware volume header.
++	 * A valid header sums to zero.
++	 */
++	u16			checksum;
++	/*
++	 * Offset, relative to the start of the header, of the extended
++	 * header (EFI_FIRMWARE_VOLUME_EXT_HEADER) or zero if there is
++	 * no extended header.
++	 */
++	u16			ext_hdr_off;
++	/* This field must always be set to zero */
++	u8			reserved[1];
++	/*
++	 * Set to 2. Future versions of this specification may define new
++	 * header fields and will increment the Revision field accordingly.
++	 */
++	u8			rev;
++	/*
++	 * An array of run-length encoded FvBlockMapEntry structures.
++	 * The array is terminated with an entry of {0,0}.
++	 */
++	struct fv_blkmap_entry	block_map[1];
++};
++
++#define EFI_FVH_SIGNATURE	SIGNATURE_32('_', 'F', 'V', 'H')
++
++/* Firmware Volume Header Revision definition */
++#define EFI_FVH_REVISION	0x02
++
++/* Extension header pointed by ExtHeaderOffset of volume header */
++struct fv_ext_header {
++	/* firmware volume name */
++	struct efi_guid		fv_name;
++	/* Size of the rest of the extension header including this structure */
++	u32			ext_hdr_size;
++};
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,340 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#ifndef __FSP_HOB_H__
++#define __FSP_HOB_H__
++
++/* Type of HOB Header */
++#define HOB_TYPE_MEM_ALLOC	0x0002
++#define HOB_TYPE_RES_DESC	0x0003
++#define HOB_TYPE_GUID_EXT	0x0004
++#define HOB_TYPE_UNUSED		0xFFFE
++#define HOB_TYPE_EOH		0xFFFF
++
++/*
++ * Describes the format and size of the data inside the HOB.
++ * All HOBs must contain this generic HOB header.
++ */
++struct hob_header {
++	u16	type;		/* HOB type */
++	u16	len;		/* HOB length */
++	u32	reserved;	/* always zero */
++};
++
++/* Enumeration of memory types introduced in UEFI */
++enum efi_mem_type {
++	EFI_RESERVED_MEMORY_TYPE,
++	/*
++	 * The code portions of a loaded application.
++	 * (Note that UEFI OS loaders are UEFI applications.)
++	 */
++	EFI_LOADER_CODE,
++	/*
++	 * The data portions of a loaded application and
++	 * the default data allocation type used by an application
++	 * to allocate pool memory.
++	 */
++	EFI_LOADER_DATA,
++	/* The code portions of a loaded Boot Services Driver */
++	EFI_BOOT_SERVICES_CODE,
++	/*
++	 * The data portions of a loaded Boot Serves Driver and
++	 * the default data allocation type used by a Boot Services
++	 * Driver to allocate pool memory.
++	 */
++	EFI_BOOT_SERVICES_DATA,
++	/* The code portions of a loaded Runtime Services Driver */
++	EFI_RUNTIME_SERVICES_CODE,
++	/*
++	 * The data portions of a loaded Runtime Services Driver and
++	 * the default data allocation type used by a Runtime Services
++	 * Driver to allocate pool memory.
++	 */
++	EFI_RUNTIME_SERVICES_DATA,
++	/* Free (unallocated) memory */
++	EFI_CONVENTIONAL_MEMORY,
++	/* Memory in which errors have been detected */
++	EFI_UNUSABLE_MEMORY,
++	/* Memory that holds the ACPI tables */
++	EFI_ACPI_RECLAIM_MEMORY,
++	/* Address space reserved for use by the firmware */
++	EFI_ACPI_MEMORY_NVS,
++	/*
++	 * Used by system firmware to request that a memory-mapped IO region
++	 * be mapped by the OS to a virtual address so it can be accessed by
++	 * EFI runtime services.
++	 */
++	EFI_MMAP_IO,
++	/*
++	 * System memory-mapped IO region that is used to translate
++	 * memory cycles to IO cycles by the processor.
++	 */
++	EFI_MMAP_IO_PORT,
++	/*
++	 * Address space reserved by the firmware for code that is
++	 * part of the processor.
++	 */
++	EFI_PAL_CODE,
++	EFI_MAX_MEMORY_TYPE
++};
++
++/*
++ * Describes all memory ranges used during the HOB producer phase that
++ * exist outside the HOB list. This HOB type describes how memory is used,
++ * not the physical attributes of memory.
++ */
++struct hob_mem_alloc {
++	struct hob_header	hdr;
++	/*
++	 * A GUID that defines the memory allocation region's type and purpose,
++	 * as well as other fields within the memory allocation HOB. This GUID
++	 * is used to define the additional data within the HOB that may be
++	 * present for the memory allocation HOB. Type efi_guid is defined in
++	 * InstallProtocolInterface() in the UEFI 2.0 specification.
++	 */
++	struct efi_guid		name;
++	/*
++	 * The base address of memory allocated by this HOB.
++	 * Type phys_addr_t is defined in AllocatePages() in the UEFI 2.0
++	 * specification.
++	 */
++	phys_addr_t		mem_base;
++	/* The length in bytes of memory allocated by this HOB */
++	phys_size_t		mem_len;
++	/*
++	 * Defines the type of memory allocated by this HOB.
++	 * The memory type definition follows the EFI_MEMORY_TYPE definition.
++	 * Type EFI_MEMORY_TYPE is defined in AllocatePages() in the UEFI 2.0
++	 * specification.
++	 */
++	enum efi_mem_type	mem_type;
++	/* padding */
++	u8			reserved[4];
++};
++
++/* Value of ResourceType in HOB_RES_DESC */
++#define RES_SYS_MEM		0x00000000
++#define RES_MMAP_IO		0x00000001
++#define RES_IO			0x00000002
++#define RES_FW_DEVICE		0x00000003
++#define RES_MMAP_IO_PORT	0x00000004
++#define RES_MEM_RESERVED	0x00000005
++#define RES_IO_RESERVED		0x00000006
++#define RES_MAX_MEM_TYPE	0x00000007
++
++/*
++ * These types can be ORed together as needed.
++ *
++ * The first three enumerations describe settings
++ * The rest of the settings describe capabilities
++ */
++#define RES_ATTR_PRESENT			0x00000001
++#define RES_ATTR_INITIALIZED			0x00000002
++#define RES_ATTR_TESTED				0x00000004
++#define RES_ATTR_SINGLE_BIT_ECC			0x00000008
++#define RES_ATTR_MULTIPLE_BIT_ECC		0x00000010
++#define RES_ATTR_ECC_RESERVED_1			0x00000020
++#define RES_ATTR_ECC_RESERVED_2			0x00000040
++#define RES_ATTR_READ_PROTECTED			0x00000080
++#define RES_ATTR_WRITE_PROTECTED		0x00000100
++#define RES_ATTR_EXECUTION_PROTECTED		0x00000200
++#define RES_ATTR_UNCACHEABLE			0x00000400
++#define RES_ATTR_WRITE_COMBINEABLE		0x00000800
++#define RES_ATTR_WRITE_THROUGH_CACHEABLE	0x00001000
++#define RES_ATTR_WRITE_BACK_CACHEABLE		0x00002000
++#define RES_ATTR_16_BIT_IO			0x00004000
++#define RES_ATTR_32_BIT_IO			0x00008000
++#define RES_ATTR_64_BIT_IO			0x00010000
++#define RES_ATTR_UNCACHED_EXPORTED		0x00020000
++
++/*
++ * Describes the resource properties of all fixed, nonrelocatable resource
++ * ranges found on the processor host bus during the HOB producer phase.
++ */
++struct hob_res_desc {
++	struct hob_header	hdr;
++	/*
++	 * A GUID representing the owner of the resource. This GUID is
++	 * used by HOB consumer phase components to correlate device
++	 * ownership of a resource.
++	 */
++	struct efi_guid		owner;
++	u32			type;
++	u32			attr;
++	/* The physical start address of the resource region */
++	phys_addr_t		phys_start;
++	/* The number of bytes of the resource region */
++	phys_size_t		len;
++};
++
++/*
++ * Allows writers of executable content in the HOB producer phase to
++ * maintain and manage HOBs with specific GUID.
++ */
++struct hob_guid {
++	struct hob_header	hdr;
++	/* A GUID that defines the contents of this HOB */
++	struct efi_guid		name;
++	/* GUID specific data goes here */
++};
++
++/* Union of all the possible HOB Types */
++union hob_pointers {
++	struct hob_header	*hdr;
++	struct hob_mem_alloc	*mem_alloc;
++	struct hob_res_desc	*res_desc;
++	struct hob_guid		*guid;
++	u8			*raw;
++};
++
++/**
++ * get_hob_type() - return the type of a HOB
++ *
++ * This macro returns the type field from the HOB header for the
++ * HOB specified by hob.
++ *
++ * @hob:    A pointer to a HOB.
++ *
++ * @return: HOB type.
++ */
++static inline u16 get_hob_type(union hob_pointers hob)
++{
++	return hob.hdr->type;
++}
++
++/**
++ * get_hob_length() - return the length, in bytes, of a HOB
++ *
++ * This macro returns the len field from the HOB header for the
++ * HOB specified by hob.
++ *
++ * @hob:    A pointer to a HOB.
++ *
++ * @return: HOB length.
++ */
++static inline u16 get_hob_length(union hob_pointers hob)
++{
++	return hob.hdr->len;
++}
++
++/**
++ * get_next_hob() - return a pointer to the next HOB in the HOB list
++ *
++ * This macro returns a pointer to HOB that follows the HOB specified by hob
++ * in the HOB List.
++ *
++ * @hob:    A pointer to a HOB.
++ *
++ * @return: A pointer to the next HOB in the HOB list.
++ */
++static inline void *get_next_hob(union hob_pointers hob)
++{
++	return (void *)(*(u8 **)&(hob) + get_hob_length(hob));
++}
++
++/**
++ * end_of_hob() - determine if a HOB is the last HOB in the HOB list
++ *
++ * This macro determine if the HOB specified by hob is the last HOB in the
++ * HOB list.  If hob is last HOB in the HOB list, then true is returned.
++ * Otherwise, false is returned.
++ *
++ * @hob:          A pointer to a HOB.
++ *
++ * @retval true:  The HOB specified by hob is the last HOB in the HOB list.
++ * @retval false: The HOB specified by hob is not the last HOB in the HOB list.
++ */
++static inline bool end_of_hob(union hob_pointers hob)
++{
++	return get_hob_type(hob) == HOB_TYPE_EOH;
++}
++
++/**
++ * get_guid_hob_data() - return a pointer to data buffer from a HOB of
++ *                       type HOB_TYPE_GUID_EXT
++ *
++ * This macro returns a pointer to the data buffer in a HOB specified by hob.
++ * hob is assumed to be a HOB of type HOB_TYPE_GUID_EXT.
++ *
++ * @hob:    A pointer to a HOB.
++ *
++ * @return: A pointer to the data buffer in a HOB.
++ */
++static inline void *get_guid_hob_data(u8 *hob)
++{
++	return (void *)(hob + sizeof(struct hob_guid));
++}
++
++/**
++ * get_guid_hob_data_size() - return the size of the data buffer from a HOB
++ *                            of type HOB_TYPE_GUID_EXT
++ *
++ * This macro returns the size, in bytes, of the data buffer in a HOB
++ * specified by hob. hob is assumed to be a HOB of type HOB_TYPE_GUID_EXT.
++ *
++ * @hob:    A pointer to a HOB.
++ *
++ * @return: The size of the data buffer.
++ */
++static inline u16 get_guid_hob_data_size(u8 *hob)
++{
++	union hob_pointers hob_p = *(union hob_pointers *)hob;
++	return get_hob_length(hob_p) - sizeof(struct hob_guid);
++}
++
++/* FSP specific GUID HOB definitions */
++#define FSP_GUID_DATA1		0x912740be
++#define FSP_GUID_DATA2		0x2284
++#define FSP_GUID_DATA3		0x4734
++#define FSP_GUID_DATA4_0	0xb9
++#define FSP_GUID_DATA4_1	0x71
++#define FSP_GUID_DATA4_2	0x84
++#define FSP_GUID_DATA4_3	0xb0
++#define FSP_GUID_DATA4_4	0x27
++#define FSP_GUID_DATA4_5	0x35
++#define FSP_GUID_DATA4_6	0x3f
++#define FSP_GUID_DATA4_7	0x0c
++
++#define FSP_HEADER_GUID \
++	{ \
++	FSP_GUID_DATA1, FSP_GUID_DATA2, FSP_GUID_DATA3, \
++	{ FSP_GUID_DATA4_0, FSP_GUID_DATA4_1, FSP_GUID_DATA4_2, \
++	  FSP_GUID_DATA4_3, FSP_GUID_DATA4_4, FSP_GUID_DATA4_5, \
++	  FSP_GUID_DATA4_6, FSP_GUID_DATA4_7 } \
++	}
++
++#define FSP_NON_VOLATILE_STORAGE_HOB_GUID \
++	{ \
++	0x721acf02, 0x4d77, 0x4c2a, \
++	{ 0xb3, 0xdc, 0x27, 0xb, 0x7b, 0xa9, 0xe4, 0xb0 } \
++	}
++
++#define FSP_BOOTLOADER_TEMP_MEM_HOB_GUID \
++	{ \
++	0xbbcff46c, 0xc8d3, 0x4113, \
++	{ 0x89, 0x85, 0xb9, 0xd4, 0xf3, 0xb3, 0xf6, 0x4e } \
++	}
++
++#define FSP_HOB_RESOURCE_OWNER_FSP_GUID \
++	{ \
++	0x69a79759, 0x1373, 0x4367, \
++	{ 0xa6, 0xc4, 0xc7, 0xf5, 0x9e, 0xfd, 0x98, 0x6e } \
++	}
++
++#define FSP_HOB_RESOURCE_OWNER_TSEG_GUID \
++	{ \
++	0xd038747c, 0xd00c, 0x4980, \
++	{ 0xb3, 0x19, 0x49, 0x01, 0x99, 0xa4, 0x7d, 0x55 } \
++	}
++
++#define FSP_HOB_RESOURCE_OWNER_GRAPHICS_GUID \
++	{ \
++	0x9c7c3aa7, 0x5332, 0x4917, \
++	{ 0x82, 0xb9, 0x56, 0xa5, 0xf3, 0xe6, 0x2a, 0x07 } \
++	}
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,32 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#ifndef _FSP_HEADER_H_
++#define _FSP_HEADER_H_
++
++#define FSP_HEADER_OFF	0x94	/* Fixed FSP header offset in the FSP image */
++
++struct __packed fsp_header {
++	u32	sign;			/* 'FSPH' */
++	u32	hdr_len;		/* header length */
++	u8	reserved1[3];
++	u8	hdr_rev;		/* header rev */
++	u32	img_rev;		/* image rev */
++	char	img_id[8];		/* signature string */
++	u32	img_size;		/* image size */
++	u32	img_base;		/* image base */
++	u32	img_attr;		/* image attribute */
++	u32	cfg_region_off;		/* configuration region offset */
++	u32	cfg_region_size;	/* configuration region size */
++	u32	api_num;		/* number of API entries */
++	u32	fsp_tempram_init;	/* tempram_init offset */
++	u32	fsp_init;		/* fsp_init offset */
++	u32	fsp_notify;		/* fsp_notify offset */
++	u32	reserved2;
++};
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,15 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#ifndef __FSP_PLATFORM_H__
++#define __FSP_PLATFORM_H__
++
++struct fspinit_rtbuf {
++	struct common_buf	common;	/* FSP common runtime data structure */
++};
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,207 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#ifndef __FSP_SUPPORT_H__
++#define __FSP_SUPPORT_H__
++
++#include "fsp_types.h"
++#include "fsp_fv.h"
++#include "fsp_ffs.h"
++#include "fsp_api.h"
++#include "fsp_hob.h"
++#include "fsp_platform.h"
++#include "fsp_infoheader.h"
++#include "fsp_bootmode.h"
++#include "fsp_vpd.h"
++
++struct shared_data {
++	struct fsp_header	*fsp_hdr;
++	u32			*stack_top;
++	struct upd_region	fsp_upd;
++};
++
++#define FSP_LOWMEM_BASE		0x100000UL
++#define FSP_HIGHMEM_BASE	0x100000000ULL
++
++/**
++ * FSP Continuation assembly helper routine
++ *
++ * This routine jumps to the C version of FSP continuation function
++ */
++void asm_continuation(void);
++
++/**
++ * FSP initialization complete
++ *
++ * This is the function that indicates FSP initialization is complete and jumps
++ * back to the bootloader with HOB list pointer as the parameter.
++ *
++ * @hob_list:    HOB list pointer
++ */
++void fsp_init_done(void *hob_list);
++
++/**
++ * FSP Continuation function
++ *
++ * @shared_data: Shared data base before stack migration
++ * @status:      Always 0
++ * @hob_list:    HOB list pointer
++ *
++ * @retval:      Never returns
++ */
++void fsp_continue(struct shared_data *shared_data, u32 status,
++		  void *hob_list);
++
++/**
++ * Find FSP header offset in FSP image
++ *
++ * @retval: the offset of FSP header. If signature is invalid, returns 0.
++ */
++u32 find_fsp_header(void);
++
++/**
++ * FSP initialization wrapper function.
++ *
++ * @stack_top: bootloader stack top address
++ * @boot_mode: boot mode defined in fsp_bootmode.h
++ * @nvs_buf:   Non-volatile memory buffer pointer
++ */
++void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf);
++
++/**
++ * FSP notification wrapper function
++ *
++ * @fsp_hdr: Pointer to FSP information header
++ * @phase:   FSP initialization phase defined in enum fsp_phase
++ *
++ * @retval:  compatible status code with EFI_STATUS defined in PI spec
++ */
++u32 fsp_notify(struct fsp_header *fsp_hdr, u32 phase);
++
++/**
++ * This function retrieves the top of usable low memory.
++ *
++ * @hob_list: A HOB list pointer.
++ *
++ * @retval:   Usable low memory top.
++ */
++u32 fsp_get_usable_lowmem_top(const void *hob_list);
++
++/**
++ * This function retrieves the top of usable high memory.
++ *
++ * @hob_list: A HOB list pointer.
++ *
++ * @retval:   Usable high memory top.
++ */
++u64 fsp_get_usable_highmem_top(const void *hob_list);
++
++/**
++ * This function retrieves a special reserved memory region.
++ *
++ * @hob_list: A HOB list pointer.
++ * @len:      A pointer to the GUID HOB data buffer length.
++ *            If the GUID HOB is located, the length will be updated.
++ * @guid:     A pointer to the owner guild.
++ *
++ * @retval:   Reserved region start address.
++ *            0 if this region does not exist.
++ */
++u64 fsp_get_reserved_mem_from_guid(const void *hob_list,
++				   u64 *len, struct efi_guid *guid);
++
++/**
++ * This function retrieves the FSP reserved normal memory.
++ *
++ * @hob_list: A HOB list pointer.
++ * @len:      A pointer to the FSP reserved memory length buffer.
++ *            If the GUID HOB is located, the length will be updated.
++ * @retval:   FSP reserved memory base
++ *            0 if this region does not exist.
++ */
++u32 fsp_get_fsp_reserved_mem(const void *hob_list, u32 *len);
++
++/**
++ * This function retrieves the TSEG reserved normal memory.
++ *
++ * @hob_list:      A HOB list pointer.
++ * @len:           A pointer to the TSEG reserved memory length buffer.
++ *                 If the GUID HOB is located, the length will be updated.
++ *
++ * @retval NULL:   Failed to find the TSEG reserved memory.
++ * @retval others: TSEG reserved memory base.
++ */
++u32 fsp_get_tseg_reserved_mem(const void *hob_list, u32 *len);
++
++/**
++ * Returns the next instance of a HOB type from the starting HOB.
++ *
++ * @type:     HOB type to search
++ * @hob_list: A pointer to the HOB list
++ *
++ * @retval:   A HOB object with matching type; Otherwise NULL.
++ */
++void *fsp_get_next_hob(u16 type, const void *hob_list);
++
++/**
++ * Returns the next instance of the matched GUID HOB from the starting HOB.
++ *
++ * @guid:     GUID to search
++ * @hob_list: A pointer to the HOB list
++ *
++ * @retval:   A HOB object with matching GUID; Otherwise NULL.
++ */
++void *fsp_get_next_guid_hob(const struct efi_guid *guid, const void *hob_list);
++
++/**
++ * This function retrieves a GUID HOB data buffer and size.
++ *
++ * @hob_list:      A HOB list pointer.
++ * @len:           A pointer to the GUID HOB data buffer length.
++ *                 If the GUID HOB is located, the length will be updated.
++ * @guid           A pointer to HOB GUID.
++ *
++ * @retval NULL:   Failed to find the GUID HOB.
++ * @retval others: GUID HOB data buffer pointer.
++ */
++void *fsp_get_guid_hob_data(const void *hob_list, u32 *len,
++			    struct efi_guid *guid);
++
++/**
++ * This function retrieves FSP Non-volatile Storage HOB buffer and size.
++ *
++ * @hob_list:      A HOB list pointer.
++ * @len:           A pointer to the NVS data buffer length.
++ *                 If the HOB is located, the length will be updated.
++ *
++ * @retval NULL:   Failed to find the NVS HOB.
++ * @retval others: FSP NVS data buffer pointer.
++ */
++void *fsp_get_nvs_data(const void *hob_list, u32 *len);
++
++/**
++ * This function retrieves Bootloader temporary stack buffer and size.
++ *
++ * @hob_list:      A HOB list pointer.
++ * @len:           A pointer to the bootloader temporary stack length.
++ *                 If the HOB is located, the length will be updated.
++ *
++ * @retval NULL:   Failed to find the bootloader temporary stack HOB.
++ * @retval others: Bootloader temporary stackbuffer pointer.
++ */
++void *fsp_get_bootloader_tmp_mem(const void *hob_list, u32 *len);
++
++/**
++ * This function overrides the default configurations in the UPD data region.
++ *
++ * @fsp_upd: A pointer to the upd_region data strcture
++ *
++ * @return:  None
++ */
++void update_fsp_upd(struct upd_region *fsp_upd);
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,82 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#ifndef __FSP_TYPES_H__
++#define __FSP_TYPES_H__
++
++/* 128 bit buffer containing a unique identifier value */
++struct efi_guid {
++	u32	data1;
++	u16	data2;
++	u16	data3;
++	u8	data4[8];
++};
++
++/**
++ * Returns a 16-bit signature built from 2 ASCII characters.
++ *
++ * This macro returns a 16-bit value built from the two ASCII characters
++ * specified by A and B.
++ *
++ * @A: The first ASCII character.
++ * @B: The second ASCII character.
++ *
++ * @return: A 16-bit value built from the two ASCII characters specified by
++ *          A and B.
++ */
++#define SIGNATURE_16(A, B)	((A) | (B << 8))
++
++/**
++ * Returns a 32-bit signature built from 4 ASCII characters.
++ *
++ * This macro returns a 32-bit value built from the four ASCII characters
++ * specified by A, B, C, and D.
++ *
++ * @A: The first ASCII character.
++ * @B: The second ASCII character.
++ * @C: The third ASCII character.
++ * @D: The fourth ASCII character.
++ *
++ * @return: A 32-bit value built from the two ASCII characters specified by
++ *          A, B, C and D.
++ */
++#define SIGNATURE_32(A, B, C, D)	\
++	(SIGNATURE_16(A, B) | (SIGNATURE_16(C, D) << 16))
++
++/**
++ * Returns a 64-bit signature built from 8 ASCII characters.
++ *
++ * This macro returns a 64-bit value built from the eight ASCII characters
++ * specified by A, B, C, D, E, F, G,and H.
++ *
++ * @A: The first ASCII character.
++ * @B: The second ASCII character.
++ * @C: The third ASCII character.
++ * @D: The fourth ASCII character.
++ * @E: The fifth ASCII character.
++ * @F: The sixth ASCII character.
++ * @G: The seventh ASCII character.
++ * @H: The eighth ASCII character.
++ *
++ * @return: A 64-bit value built from the two ASCII characters specified by
++ *          A, B, C, D, E, F, G and H.
++ */
++#define SIGNATURE_64(A, B, C, D, E, F, G, H)	\
++	(SIGNATURE_32(A, B, C, D) | ((u64)(SIGNATURE_32(E, F, G, H)) << 32))
++
++/*
++ * Define FSP API return status code.
++ * Compatiable with EFI_STATUS defined in PI Spec.
++ */
++#define FSP_SUCCESS		0
++#define FSP_INVALID_PARAM	0x80000002
++#define FSP_UNSUPPORTED		0x80000003
++#define FSP_DEVICE_ERROR	0x80000007
++#define FSP_NOT_FOUND		0x8000000E
++#define FSP_ALREADY_STARTED	0x80000014
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,56 @@
++/*
++ * Copyright (C) 2013, Intel Corporation
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * This file is automatically generated. Please do NOT modify !!!
++ *
++ * SPDX-License-Identifier:	Intel
++ */
++
++#ifndef __VPDHEADER_H__
++#define __VPDHEADER_H__
++
++#define UPD_TERMINATOR	0x55AA
++
++struct __packed upd_region {
++	u64	sign;			/* Offset 0x0000 */
++	u64	reserved;		/* Offset 0x0008 */
++	u8	dummy[240];		/* Offset 0x0010 */
++	u8	hda_verb_header[12];	/* Offset 0x0100 */
++	u32	hda_verb_length;	/* Offset 0x010C */
++	u8	hda_verb_data0[16];	/* Offset 0x0110 */
++	u8	hda_verb_data1[16];	/* Offset 0x0120 */
++	u8	hda_verb_data2[16];	/* Offset 0x0130 */
++	u8	hda_verb_data3[16];	/* Offset 0x0140 */
++	u8	hda_verb_data4[16];	/* Offset 0x0150 */
++	u8	hda_verb_data5[16];	/* Offset 0x0160 */
++	u8	hda_verb_data6[16];	/* Offset 0x0170 */
++	u8	hda_verb_data7[16];	/* Offset 0x0180 */
++	u8	hda_verb_data8[16];	/* Offset 0x0190 */
++	u8	hda_verb_data9[16];	/* Offset 0x01A0 */
++	u8	hda_verb_data10[16];	/* Offset 0x01B0 */
++	u8	hda_verb_data11[16];	/* Offset 0x01C0 */
++	u8	hda_verb_data12[16];	/* Offset 0x01D0 */
++	u8	hda_verb_data13[16];	/* Offset 0x01E0 */
++	u8	hda_verb_pad[47];	/* Offset 0x01F0 */
++	u16	terminator;		/* Offset 0x021F */
++};
++
++#define VPD_IMAGE_ID	0x445056574F4E4E4D	/* 'MNNOWVPD' */
++#define VPD_IMAGE_REV	0x00000301
++
++struct __packed vpd_region {
++	u64	sign;			/* Offset 0x0000 */
++	u32	img_rev;		/* Offset 0x0008 */
++	u32	upd_offset;		/* Offset 0x000C */
++	u8	unused[16];		/* Offset 0x0010 */
++	u32	fsp_res_memlen;		/* Offset 0x0020 */
++	u8	disable_pcie1;		/* Offset 0x0024 */
++	u8	disable_pcie2;		/* Offset 0x0025 */
++	u8	disable_pcie3;		/* Offset 0x0026 */
++	u8	enable_azalia;		/* Offset 0x0027 */
++	u8	legacy_seg_decode;	/* Offset 0x0028 */
++	u8	pcie_port_ioh;		/* Offset 0x0029 */
++};
++
++#endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/gpio.h u-boot/arch/x86/include/asm/arch-queensbay/gpio.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/gpio.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/gpio.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,13 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef _X86_ARCH_GPIO_H_
++#define _X86_ARCH_GPIO_H_
++
++/* Where in config space is the register that points to the GPIO registers? */
++#define PCI_CFG_GPIOBASE 0x44
++
++#endif /* _X86_ARCH_GPIO_H_ */
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/tnc.h u-boot/arch/x86/include/asm/arch-queensbay/tnc.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/arch-queensbay/tnc.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/arch-queensbay/tnc.h	2015-01-01 17:34:32.253503252 +0100
+@@ -0,0 +1,15 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef _X86_ARCH_TNC_H_
++#define _X86_ARCH_TNC_H_
++
++#include <pci.h>
++
++/* PCI Configuration Space (D31:F0): LPC */
++#define PCH_LPC_DEV	PCI_BDF(0, 0x1f, 0)
++
++#endif /* _X86_ARCH_TNC_H_ */
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/config.h u-boot/arch/x86/include/asm/config.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/config.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/include/asm/config.h	2015-01-01 17:34:32.257503186 +0100
+@@ -10,6 +10,5 @@
+ #define CONFIG_SYS_GENERIC_BOARD
+ #define CONFIG_LMB
+ #define CONFIG_SYS_BOOT_RAMDISK_HIGH
+-#define asmlinkage __attribute__((regparm(0)))
+ 
+ #endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/global_data.h u-boot/arch/x86/include/asm/global_data.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/global_data.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/include/asm/global_data.h	2015-01-01 17:34:32.257503186 +0100
+@@ -47,6 +47,9 @@
+ 	enum pei_boot_mode_t pei_boot_mode;
+ 	const struct pch_gpio_map *gpio_map;	/* board GPIO map */
+ 	struct memory_info meminfo;	/* Memory information */
++#ifdef CONFIG_HAVE_FSP
++	void	*hob_list;		/* FSP HOB list */
++#endif
+ };
+ 
+ #endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/gpio.h u-boot/arch/x86/include/asm/gpio.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/gpio.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/include/asm/gpio.h	2015-01-01 17:34:32.257503186 +0100
+@@ -11,7 +11,7 @@
+ #include <asm-generic/gpio.h>
+ 
+ struct ich6_bank_platdata {
+-	uint32_t base_addr;
++	uint16_t base_addr;
+ 	const char *bank_name;
+ };
+ 
+@@ -147,6 +147,7 @@
+ 	} set3;
+ };
+ 
++void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio);
+ void ich_gpio_set_gpio_map(const struct pch_gpio_map *map);
+ 
+ #endif /* _X86_GPIO_H_ */
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/ibmpc.h u-boot/arch/x86/include/asm/ibmpc.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/ibmpc.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/include/asm/ibmpc.h	2015-01-01 17:34:32.257503186 +0100
+@@ -18,4 +18,7 @@
+ #define SYSCTLA         0x92
+ #define SLAVE_PIC       0xa0
+ 
++#define UART0_BASE	0x3f8
++#define UART1_BASE	0x2f8
++
+ #endif
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/linkage.h u-boot/arch/x86/include/asm/linkage.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/linkage.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/linkage.h	2015-01-01 17:34:32.257503186 +0100
+@@ -0,0 +1,6 @@
++#ifndef _ASM_X86_LINKAGE_H
++#define _ASM_X86_LINKAGE_H
++
++#define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0)))
++
++#endif /* _ASM_X86_LINKAGE_H */
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/pnp_def.h u-boot/arch/x86/include/asm/pnp_def.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/pnp_def.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/include/asm/pnp_def.h	2015-01-01 17:34:32.257503186 +0100
+@@ -0,0 +1,90 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * Adapted from coreboot src/include/device/pnp_def.h
++ * and arch/x86/include/arch/io.h
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef _ASM_PNP_DEF_H_
++#define _ASM_PNP_DEF_H_
++
++#include <asm/io.h>
++
++#define PNP_IDX_EN   0x30
++#define PNP_IDX_IO0  0x60
++#define PNP_IDX_IO1  0x62
++#define PNP_IDX_IO2  0x64
++#define PNP_IDX_IO3  0x66
++#define PNP_IDX_IRQ0 0x70
++#define PNP_IDX_IRQ1 0x72
++#define PNP_IDX_DRQ0 0x74
++#define PNP_IDX_DRQ1 0x75
++#define PNP_IDX_MSC0 0xf0
++#define PNP_IDX_MSC1 0xf1
++
++/* Generic functions for pnp devices */
++
++/*
++ * pnp device is a 16-bit integer composed of its i/o port address at high byte
++ * and logic function number at low byte.
++ */
++#define PNP_DEV(PORT, FUNC) (((PORT) << 8) | (FUNC))
++
++static inline void pnp_write_config(uint16_t dev, uint8_t reg, uint8_t value)
++{
++	uint8_t port = dev >> 8;
++
++	outb(reg, port);
++	outb(value, port + 1);
++}
++
++static inline uint8_t pnp_read_config(uint16_t dev, uint8_t reg)
++{
++	uint8_t port = dev >> 8;
++
++	outb(reg, port);
++	return inb(port + 1);
++}
++
++static inline void pnp_set_logical_device(uint16_t dev)
++{
++	uint8_t device = dev & 0xff;
++
++	pnp_write_config(dev, 0x07, device);
++}
++
++static inline void pnp_set_enable(uint16_t dev, int enable)
++{
++	pnp_write_config(dev, PNP_IDX_EN, enable ? 1 : 0);
++}
++
++static inline int pnp_read_enable(uint16_t dev)
++{
++	return !!pnp_read_config(dev, PNP_IDX_EN);
++}
++
++static inline void pnp_set_iobase(uint16_t dev, uint8_t index, uint16_t iobase)
++{
++	pnp_write_config(dev, index + 0, (iobase >> 8) & 0xff);
++	pnp_write_config(dev, index + 1, iobase & 0xff);
++}
++
++static inline uint16_t pnp_read_iobase(uint16_t dev, uint8_t index)
++{
++	return ((uint16_t)(pnp_read_config(dev, index)) << 8) |
++		pnp_read_config(dev, index + 1);
++}
++
++static inline void pnp_set_irq(uint16_t dev, uint8_t index, unsigned irq)
++{
++	pnp_write_config(dev, index, irq);
++}
++
++static inline void pnp_set_drq(uint16_t dev, uint8_t index, unsigned drq)
++{
++	pnp_write_config(dev, index, drq & 0xff);
++}
++
++#endif /* _ASM_PNP_DEF_H_ */
+diff -ruN u-boot-2015.01-rc3/arch/x86/include/asm/post.h u-boot/arch/x86/include/asm/post.h
+--- u-boot-2015.01-rc3/arch/x86/include/asm/post.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/include/asm/post.h	2015-01-01 17:34:32.257503186 +0100
+@@ -33,6 +33,8 @@
+ #define POST_LAPIC		0x30
+ 
+ #define POST_RAM_FAILURE	0xea
++#define POST_BIST_FAILURE	0xeb
++#define POST_CAR_FAILURE	0xec
+ 
+ /* Output a post code using al - value must be 0 to 0xff */
+ #ifdef __ASSEMBLY__
+diff -ruN u-boot-2015.01-rc3/arch/x86/Kconfig u-boot/arch/x86/Kconfig
+--- u-boot-2015.01-rc3/arch/x86/Kconfig	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/Kconfig	2015-01-01 17:34:32.249503317 +0100
+@@ -32,6 +32,15 @@
+ 	  and it provides a 2560x1700 high resolution touch-enabled LCD
+ 	  display.
+ 
++config TARGET_CROWNBAY
++	bool "Support Intel Crown Bay CRB"
++	help
++	  This is the Intel Crown Bay Customer Reference Board. It contains
++	  the Intel Atom Processor E6xx populated on the COM Express module
++	  with 1GB DDR2 soldered down memory and a carrier board with the
++	  Intel Platform Controller Hub EG20T, other system components and
++	  peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
++
+ endchoice
+ 
+ config RAMBASE
+@@ -61,9 +70,85 @@
+ config SMM_TSEG_SIZE
+ 	hex
+ 
++config BOARD_ROMSIZE_KB_512
++	bool
++config BOARD_ROMSIZE_KB_1024
++	bool
++config BOARD_ROMSIZE_KB_2048
++	bool
++config BOARD_ROMSIZE_KB_4096
++	bool
++config BOARD_ROMSIZE_KB_8192
++	bool
++config BOARD_ROMSIZE_KB_16384
++	bool
++
++choice
++	prompt "ROM chip size"
++	default UBOOT_ROMSIZE_KB_512 if BOARD_ROMSIZE_KB_512
++	default UBOOT_ROMSIZE_KB_1024 if BOARD_ROMSIZE_KB_1024
++	default UBOOT_ROMSIZE_KB_2048 if BOARD_ROMSIZE_KB_2048
++	default UBOOT_ROMSIZE_KB_4096 if BOARD_ROMSIZE_KB_4096
++	default UBOOT_ROMSIZE_KB_8192 if BOARD_ROMSIZE_KB_8192
++	default UBOOT_ROMSIZE_KB_16384 if BOARD_ROMSIZE_KB_16384
++	help
++	  Select the size of the ROM chip you intend to flash U-Boot on.
++
++	  The build system will take care of creating a u-boot.rom file
++	  of the matching size.
++
++config UBOOT_ROMSIZE_KB_512
++	bool "512 KB"
++	help
++	  Choose this option if you have a 512 KB ROM chip.
++
++config UBOOT_ROMSIZE_KB_1024
++	bool "1024 KB (1 MB)"
++	help
++	  Choose this option if you have a 1024 KB (1 MB) ROM chip.
++
++config UBOOT_ROMSIZE_KB_2048
++	bool "2048 KB (2 MB)"
++	help
++	  Choose this option if you have a 2048 KB (2 MB) ROM chip.
++
++config UBOOT_ROMSIZE_KB_4096
++	bool "4096 KB (4 MB)"
++	help
++	  Choose this option if you have a 4096 KB (4 MB) ROM chip.
++
++config UBOOT_ROMSIZE_KB_8192
++	bool "8192 KB (8 MB)"
++	help
++	  Choose this option if you have a 8192 KB (8 MB) ROM chip.
++
++config UBOOT_ROMSIZE_KB_16384
++	bool "16384 KB (16 MB)"
++	help
++	  Choose this option if you have a 16384 KB (16 MB) ROM chip.
++
++endchoice
++
++# Map the config names to an integer (KB).
++config UBOOT_ROMSIZE_KB
++	int
++	default 512 if UBOOT_ROMSIZE_KB_512
++	default 1024 if UBOOT_ROMSIZE_KB_1024
++	default 2048 if UBOOT_ROMSIZE_KB_2048
++	default 4096 if UBOOT_ROMSIZE_KB_4096
++	default 8192 if UBOOT_ROMSIZE_KB_8192
++	default 16384 if UBOOT_ROMSIZE_KB_16384
++
++# Map the config names to a hex value (bytes).
+ config ROM_SIZE
+ 	hex
+-	default 0x800000
++	default 0x80000 if UBOOT_ROMSIZE_KB_512
++	default 0x100000 if UBOOT_ROMSIZE_KB_1024
++	default 0x200000 if UBOOT_ROMSIZE_KB_2048
++	default 0x400000 if UBOOT_ROMSIZE_KB_4096
++	default 0x800000 if UBOOT_ROMSIZE_KB_8192
++	default 0xc00000 if UBOOT_ROMSIZE_KB_12288
++	default 0x1000000 if UBOOT_ROMSIZE_KB_16384
+ 
+ config HAVE_INTEL_ME
+ 	bool "Platform requires Intel Management Engine"
+@@ -234,8 +319,12 @@
+ 
+ source "arch/x86/cpu/ivybridge/Kconfig"
+ 
++source "arch/x86/cpu/queensbay/Kconfig"
++
+ source "board/coreboot/coreboot/Kconfig"
+ 
+ source "board/google/chromebook_link/Kconfig"
+ 
++source "board/intel/crownbay/Kconfig"
++
+ endmenu
+diff -ruN u-boot-2015.01-rc3/arch/x86/lib/asm-offsets.c u-boot/arch/x86/lib/asm-offsets.c
+--- u-boot-2015.01-rc3/arch/x86/lib/asm-offsets.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/lib/asm-offsets.c	2015-01-01 17:34:32.257503186 +0100
+@@ -17,6 +17,9 @@
+ 
+ int main(void)
+ {
+-	DEFINE(GENERATED_GD_RELOC_OFF, offsetof(gd_t, reloc_off));
++	DEFINE(GD_BIST, offsetof(gd_t, arch.bist));
++#ifdef CONFIG_HAVE_FSP
++	DEFINE(GD_HOB_LIST, offsetof(gd_t, arch.hob_list));
++#endif
+ 	return 0;
+ }
+diff -ruN u-boot-2015.01-rc3/arch/x86/lib/bios.c u-boot/arch/x86/lib/bios.c
+--- u-boot-2015.01-rc3/arch/x86/lib/bios.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/lib/bios.c	2015-01-01 17:34:32.257503186 +0100
+@@ -9,6 +9,7 @@
+ #include <common.h>
+ #include <bios_emul.h>
+ #include <vbe.h>
++#include <linux/linkage.h>
+ #include <asm/cache.h>
+ #include <asm/processor.h>
+ #include <asm/i8259.h>
+diff -ruN u-boot-2015.01-rc3/arch/x86/lib/bios.h u-boot/arch/x86/lib/bios.h
+--- u-boot-2015.01-rc3/arch/x86/lib/bios.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/lib/bios.h	2015-01-01 17:34:32.257503186 +0100
+@@ -10,6 +10,8 @@
+ #ifndef _X86_LIB_BIOS_H
+ #define _X86_LIB_BIOS_H
+ 
++#include <linux/linkage.h>
++
+ #define REALMODE_BASE		0x600
+ 
+ #ifdef __ASSEMBLY__
+diff -ruN u-boot-2015.01-rc3/arch/x86/lib/cmd_hob.c u-boot/arch/x86/lib/cmd_hob.c
+--- u-boot-2015.01-rc3/arch/x86/lib/cmd_hob.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/arch/x86/lib/cmd_hob.c	2015-01-01 17:34:32.257503186 +0100
+@@ -0,0 +1,65 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <command.h>
++#include <linux/compiler.h>
++#include <asm/arch/fsp/fsp_support.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++static char *hob_type[] = {
++	"reserved",
++	"Hand-off",
++	"Memory Allocation",
++	"Resource Descriptor",
++	"GUID Extension",
++	"Firmware Volume",
++	"CPU",
++	"Memory Pool",
++	"reserved",
++	"Firmware Volume 2",
++	"Load PEIM Unused",
++	"UEFI Capsule",
++};
++
++int do_hob(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
++{
++	union hob_pointers hob;
++	u16 type;
++	char *desc;
++	int i = 0;
++
++	hob.raw = (u8 *)gd->arch.hob_list;
++
++	printf("HOB list address: 0x%08x\n\n", (unsigned int)hob.raw);
++
++	printf("No. | Address  | Type                | Length in Bytes\n");
++	printf("----|----------|---------------------|----------------\n");
++	while (!end_of_hob(hob)) {
++		printf("%-3d | %08x | ", i, (unsigned int)hob.raw);
++		type = get_hob_type(hob);
++		if (type == HOB_TYPE_UNUSED)
++			desc = "*Unused*";
++		else if (type == HOB_TYPE_EOH)
++			desc = "*END OF HOB*";
++		else if (type >= 0 && type <= ARRAY_SIZE(hob_type))
++			desc = hob_type[type];
++		else
++			desc = "*Invalid Type*";
++		printf("%-19s | %-15d\n", desc, get_hob_length(hob));
++		hob.raw = get_next_hob(hob);
++		i++;
++	}
++
++	return 0;
++}
++
++U_BOOT_CMD(
++	hob,	1,	1,	do_hob,
++	"print Firmware Support Package (FSP) Hand-Off Block information",
++	""
++);
+diff -ruN u-boot-2015.01-rc3/arch/x86/lib/Makefile u-boot/arch/x86/lib/Makefile
+--- u-boot-2015.01-rc3/arch/x86/lib/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/arch/x86/lib/Makefile	2015-01-01 17:34:32.257503186 +0100
+@@ -10,6 +10,7 @@
+ obj-y += bios_interrupts.o
+ obj-$(CONFIG_CMD_BOOTM) += bootm.o
+ obj-y	+= cmd_boot.o
++obj-$(CONFIG_HAVE_FSP) += cmd_hob.o
+ obj-y	+= gcc.o
+ obj-y	+= init_helpers.o
+ obj-y	+= interrupts.o
+diff -ruN u-boot-2015.01-rc3/board/altera/socfpga/MAINTAINERS u-boot/board/altera/socfpga/MAINTAINERS
+--- u-boot-2015.01-rc3/board/altera/socfpga/MAINTAINERS	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/altera/socfpga/MAINTAINERS	2015-01-01 17:34:32.269502990 +0100
+@@ -5,3 +5,8 @@
+ F:	board/altera/socfpga/
+ F:	include/configs/socfpga_cyclone5.h
+ F:	configs/socfpga_cyclone5_defconfig
++
++SOCRATES BOARD
++M:	Stefan Roese <sr@denx.de>
++S:	Maintained
++F:	configs/socfpga_socrates_defconfig
+diff -ruN u-boot-2015.01-rc3/board/altera/socfpga/socfpga_cyclone5.c u-boot/board/altera/socfpga/socfpga_cyclone5.c
+--- u-boot-2015.01-rc3/board/altera/socfpga/socfpga_cyclone5.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/altera/socfpga/socfpga_cyclone5.c	2015-01-01 17:34:32.273502924 +0100
+@@ -12,7 +12,9 @@
+ #include <usb/s3c_udc.h>
+ #include <usb_mass_storage.h>
+ 
++#include <micrel.h>
+ #include <netdev.h>
++#include <phy.h>
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+@@ -44,6 +46,42 @@
+ 	return 0;
+ }
+ 
++/*
++ * PHY configuration
++ */
++#ifdef CONFIG_PHY_MICREL_KSZ9021
++int board_phy_config(struct phy_device *phydev)
++{
++	int ret;
++	/*
++	 * These skew settings for the KSZ9021 ethernet phy is required for ethernet
++	 * to work reliably on most flavors of cyclone5 boards.
++	 */
++	ret = ksz9021_phy_extended_write(phydev,
++					 MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
++					 0x0);
++	if (ret)
++		return ret;
++
++	ret = ksz9021_phy_extended_write(phydev,
++					 MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
++					 0x0);
++	if (ret)
++		return ret;
++
++	ret = ksz9021_phy_extended_write(phydev,
++					 MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
++					 0xf0f0);
++	if (ret)
++		return ret;
++
++	if (phydev->drv->config)
++		return phydev->drv->config(phydev);
++
++	return 0;
++}
++#endif
++
+ #ifdef CONFIG_USB_GADGET
+ struct s3c_plat_otg_data socfpga_otg_data = {
+ 	.regs_otg	= CONFIG_USB_DWC2_REG_ADDR,
+diff -ruN u-boot-2015.01-rc3/board/aristainetos/aristainetos.c u-boot/board/aristainetos/aristainetos.c
+--- u-boot-2015.01-rc3/board/aristainetos/aristainetos.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/aristainetos/aristainetos.c	2015-01-01 17:34:32.281502792 +0100
+@@ -301,7 +301,7 @@
+ 	/* clear gpr1[14], gpr1[18:17] to select anatop clock */
+ 	clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
+ 
+-	ret = enable_fec_anatop_clock(ENET_50MHz);
++	ret = enable_fec_anatop_clock(ENET_50MHZ);
+ 	if (ret)
+ 		return ret;
+ 
+diff -ruN u-boot-2015.01-rc3/board/armltd/vexpress64/MAINTAINERS u-boot/board/armltd/vexpress64/MAINTAINERS
+--- u-boot-2015.01-rc3/board/armltd/vexpress64/MAINTAINERS	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/armltd/vexpress64/MAINTAINERS	2015-01-01 17:34:32.281502792 +0100
+@@ -6,6 +6,6 @@
+ F:	configs/vexpress_aemv8a_defconfig
+ 
+ VEXPRESS_AEMV8A_SEMI BOARD
+-M:	Steve Rae <srae@broadcom.com>
++M:	Linus Walleij <linus.walleij@linaro.org>
+ S:	Maintained
+ F:	configs/vexpress_aemv8a_semi_defconfig
+diff -ruN u-boot-2015.01-rc3/board/avionic-design/common/tamonten-ng.c u-boot/board/avionic-design/common/tamonten-ng.c
+--- u-boot-2015.01-rc3/board/avionic-design/common/tamonten-ng.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/avionic-design/common/tamonten-ng.c	2015-01-01 17:34:32.285502727 +0100
+@@ -6,6 +6,7 @@
+  */
+ 
+ #include <common.h>
++#include <dm.h>
+ #include <asm/arch/pinmux.h>
+ #include <asm/arch/gp_padctrl.h>
+ #include <asm/arch/gpio.h>
+@@ -51,8 +52,15 @@
+ 
+ void pmu_write(uchar reg, uchar data)
+ {
+-	i2c_set_bus_num(4);	/* PMU is on bus 4 */
+-	i2c_write(PMU_I2C_ADDRESS, reg, 1, &data, 1);
++	struct udevice *dev;
++	int ret;
++
++	ret = i2c_get_chip_for_busnum(4, PMU_I2C_ADDRESS, &dev);
++	if (ret) {
++		debug("%s: Cannot find PMIC I2C chip\n", __func__);
++		return;
++	}
++	i2c_write(dev, reg, &data, 1);
+ }
+ 
+ /*
+diff -ruN u-boot-2015.01-rc3/board/coreboot/coreboot/coreboot.c u-boot/board/coreboot/coreboot/coreboot.c
+--- u-boot-2015.01-rc3/board/coreboot/coreboot/coreboot.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/coreboot/coreboot/coreboot.c	2015-01-01 17:34:32.305502399 +0100
+@@ -6,6 +6,7 @@
+ 
+ #include <common.h>
+ #include <cros_ec.h>
++#include <asm/gpio.h>
+ 
+ int arch_early_init_r(void)
+ {
+@@ -14,3 +15,8 @@
+ 
+ 	return 0;
+ }
++
++void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
++{
++	return;
++}
+diff -ruN u-boot-2015.01-rc3/board/freescale/common/arm_sleep.c u-boot/board/freescale/common/arm_sleep.c
+--- u-boot-2015.01-rc3/board/freescale/common/arm_sleep.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/freescale/common/arm_sleep.c	2015-01-01 17:34:32.357501547 +0100
+@@ -0,0 +1,95 @@
++/*
++ * Copyright 2014 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#if !defined(CONFIG_ARMV7_NONSEC) || !defined(CONFIG_ARMV7_VIRT)
++#error " Deep sleep needs non-secure mode support. "
++#else
++#include <asm/secure.h>
++#endif
++#include <asm/armv7.h>
++#include <asm/cache.h>
++
++#if defined(CONFIG_LS102XA)
++#include <asm/arch/immap_ls102xa.h>
++#endif
++
++#include "sleep.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++void __weak board_mem_sleep_setup(void)
++{
++}
++
++void __weak board_sleep_prepare(void)
++{
++}
++
++bool is_warm_boot(void)
++{
++	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
++
++	if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
++		return 1;
++
++	return 0;
++}
++
++void fsl_dp_disable_console(void)
++{
++	gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
++}
++
++/*
++ * When wakeup from deep sleep, the first 128 bytes space
++ * will be used to do DDR training which corrupts the data
++ * in there. This function will restore them.
++ */
++static void dp_ddr_restore(void)
++{
++	u64 *src, *dst;
++	int i;
++	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
++
++	/* get the address of ddr date from SPARECR3 */
++	src = (u64 *)in_le32(&scfg->sparecr[2]);
++	dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
++
++	for (i = 0; i < DDR_BUFF_LEN / 8; i++)
++		*dst++ = *src++;
++
++	flush_dcache_all();
++}
++
++static void dp_resume_prepare(void)
++{
++	dp_ddr_restore();
++	board_sleep_prepare();
++	armv7_init_nonsec();
++	cleanup_before_linux();
++}
++
++int fsl_dp_resume(void)
++{
++	u32 start_addr;
++	void (*kernel_resume)(void);
++	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
++
++	if (!is_warm_boot())
++		return 0;
++
++	dp_resume_prepare();
++
++	/* Get the entry address and jump to kernel */
++	start_addr = in_le32(&scfg->sparecr[1]);
++	debug("Entry address is 0x%08x\n", start_addr);
++	kernel_resume = (void (*)(void))start_addr;
++	secure_ram_addr(_do_nonsec_entry)(kernel_resume, 0, 0, 0);
++
++	return 0;
++}
+diff -ruN u-boot-2015.01-rc3/board/freescale/common/ls102xa_stream_id.c u-boot/board/freescale/common/ls102xa_stream_id.c
+--- u-boot-2015.01-rc3/board/freescale/common/ls102xa_stream_id.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/freescale/common/ls102xa_stream_id.c	2015-01-01 17:34:32.357501547 +0100
+@@ -0,0 +1,18 @@
++/*
++ * Copyright 2014 Freescale Semiconductor
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/ls102xa_stream_id.h>
++
++void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
++{
++	uint32_t *scfg = (uint32_t *)CONFIG_SYS_FSL_SCFG_ADDR;
++	int i;
++
++	for (i = 0; i < num; i++)
++		out_be32(scfg + id[i].offset, id[i].stream_id);
++}
+diff -ruN u-boot-2015.01-rc3/board/freescale/common/Makefile u-boot/board/freescale/common/Makefile
+--- u-boot-2015.01-rc3/board/freescale/common/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/common/Makefile	2015-01-01 17:34:32.357501547 +0100
+@@ -37,6 +37,12 @@
+ 
+ obj-$(CONFIG_FSL_DIU_CH7301)	+= diu_ch7301.o
+ 
++ifdef CONFIG_ARM
++obj-$(CONFIG_DEEP_SLEEP)		+= arm_sleep.o
++else
++obj-$(CONFIG_DEEP_SLEEP)		+= mpc85xx_sleep.o
++endif
++
+ obj-$(CONFIG_FSL_DCU_SII9022A)    += dcu_sii9022a.o
+ 
+ obj-$(CONFIG_MPC8541CDS)	+= cds_pci_ft.o
+@@ -56,10 +62,14 @@
+ obj-$(CONFIG_ZM7300)		+= zm7300.o
+ obj-$(CONFIG_POWER_PFUZE100)	+= pfuze.o
+ 
++obj-$(CONFIG_LS102XA_STREAM_ID)	+= ls102xa_stream_id.o
++
+ # deal with common files for P-series corenet based devices
+ obj-$(CONFIG_P2041RDB)	+= p_corenet/
+ obj-$(CONFIG_P3041DS)	+= p_corenet/
+ obj-$(CONFIG_P4080DS)	+= p_corenet/
+ obj-$(CONFIG_P5020DS)	+= p_corenet/
+ obj-$(CONFIG_P5040DS)	+= p_corenet/
++
++obj-$(CONFIG_LS102XA_NS_ACCESS)	+= ns_access.o
+ endif
+diff -ruN u-boot-2015.01-rc3/board/freescale/common/mpc85xx_sleep.c u-boot/board/freescale/common/mpc85xx_sleep.c
+--- u-boot-2015.01-rc3/board/freescale/common/mpc85xx_sleep.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/freescale/common/mpc85xx_sleep.c	2015-01-01 17:34:32.357501547 +0100
+@@ -0,0 +1,88 @@
++/*
++ * Copyright 2014 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/immap_85xx.h>
++#include "sleep.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++void __weak board_mem_sleep_setup(void)
++{
++}
++
++void __weak board_sleep_prepare(void)
++{
++}
++
++bool is_warm_boot(void)
++{
++	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
++
++	if (in_be32(&gur->scrtsr[0]) & DCFG_CCSR_CRSTSR_WDRFR)
++		return 1;
++
++	return 0;
++}
++
++void fsl_dp_disable_console(void)
++{
++	gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
++}
++
++/*
++ * When wakeup from deep sleep, the first 128 bytes space
++ * will be used to do DDR training which corrupts the data
++ * in there. This function will restore them.
++ */
++static void dp_ddr_restore(void)
++{
++	volatile u64 *src, *dst;
++	int i;
++	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
++
++	/* get the address of ddr date from SPARECR3 */
++	src = (u64 *)in_be32(&scfg->sparecr[2]);
++	dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
++
++	for (i = 0; i < DDR_BUFF_LEN / 8; i++)
++		*dst++ = *src++;
++
++	flush_dcache();
++}
++
++static void dp_resume_prepare(void)
++{
++	dp_ddr_restore();
++
++	board_sleep_prepare();
++
++	l2cache_init();
++#if defined(CONFIG_RAMBOOT_PBL)
++	disable_cpc_sram();
++#endif
++	enable_cpc();
++}
++
++int fsl_dp_resume(void)
++{
++	u32 start_addr;
++	void (*kernel_resume)(void);
++	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
++
++	if (!is_warm_boot())
++		return 0;
++
++	dp_resume_prepare();
++
++	/* Get the entry address and jump to kernel */
++	start_addr = in_be32(&scfg->sparecr[1]);
++	debug("Entry address is 0x%08x\n", start_addr);
++	kernel_resume = (void (*)(void))start_addr;
++	kernel_resume();
++
++	return 0;
++}
+diff -ruN u-boot-2015.01-rc3/board/freescale/common/ns_access.c u-boot/board/freescale/common/ns_access.c
+--- u-boot-2015.01-rc3/board/freescale/common/ns_access.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/freescale/common/ns_access.c	2015-01-01 17:34:32.357501547 +0100
+@@ -0,0 +1,30 @@
++/*
++ * Copyright 2014 Freescale Semiconductor
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/ns_access.h>
++
++void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num)
++{
++	u32 *base = (u32 *)CONFIG_SYS_FSL_CSU_ADDR;
++	u32 *reg;
++	uint32_t val;
++	int i;
++
++	for (i = 0; i < num; i++) {
++		reg = base + ns_dev[i].ind / 2;
++		val = in_be32(reg);
++		if (ns_dev[i].ind % 2 == 0) {
++			val &= 0x0000ffff;
++			val |= ns_dev[i].val << 16;
++		} else {
++			val &= 0xffff0000;
++			val |= ns_dev[i].val;
++		}
++		out_be32(reg, val);
++	}
++}
+diff -ruN u-boot-2015.01-rc3/board/freescale/common/qixis.h u-boot/board/freescale/common/qixis.h
+--- u-boot-2015.01-rc3/board/freescale/common/qixis.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/common/qixis.h	2015-01-01 17:34:32.357501547 +0100
+@@ -100,8 +100,15 @@
+ void qixis_write_i2c(unsigned int reg, u8 value);
+ #endif
+ 
++#if defined(CONFIG_QIXIS_I2C_ACCESS) && defined(CONFIG_SYS_I2C_FPGA_ADDR)
++#define QIXIS_READ(reg) qixis_read_i2c(offsetof(struct qixis, reg))
++#define QIXIS_WRITE(reg, value) \
++	qixis_write_i2c(offsetof(struct qixis, reg), value)
++#else
+ #define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
+ #define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
++#endif
++
+ #ifdef CONFIG_SYS_I2C_FPGA_ADDR
+ #define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg))
+ #define QIXIS_WRITE_I2C(reg, value) \
+diff -ruN u-boot-2015.01-rc3/board/freescale/common/sleep.h u-boot/board/freescale/common/sleep.h
+--- u-boot-2015.01-rc3/board/freescale/common/sleep.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/freescale/common/sleep.h	2015-01-01 17:34:32.357501547 +0100
+@@ -0,0 +1,21 @@
++/*
++ * Copyright 2014 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __SLEEP_H
++#define __SLEEP_H
++
++#define DCFG_CCSR_CRSTSR_WDRFR	(1 << 3)
++#define DDR_BUFF_LEN			128
++
++/* determine if it is a wakeup from deep sleep */
++bool is_warm_boot(void);
++
++/* disable console output */
++void fsl_dp_disable_console(void);
++
++/* clean up everything and jump to kernel */
++int fsl_dp_resume(void);
++#endif
+diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ddr.c u-boot/board/freescale/ls1021aqds/ddr.c
+--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ddr.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/ls1021aqds/ddr.c	2015-01-01 17:34:32.361501481 +0100
+@@ -153,9 +153,12 @@
+ {
+ 	phys_size_t dram_size;
+ 
++#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
+ 	puts("Initializing DDR....using SPD\n");
+ 	dram_size = fsl_ddr_sdram();
+-
++#else
++	dram_size =  fsl_ddr_sdram_size();
++#endif
+ 	return dram_size;
+ }
+ 
+diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls1021aqds.c u-boot/board/freescale/ls1021aqds/ls1021aqds.c
+--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls1021aqds.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/ls1021aqds/ls1021aqds.c	2015-01-01 17:34:32.361501481 +0100
+@@ -8,12 +8,17 @@
+ #include <i2c.h>
+ #include <asm/io.h>
+ #include <asm/arch/immap_ls102xa.h>
++#include <asm/arch/ns_access.h>
+ #include <asm/arch/clock.h>
+ #include <asm/arch/fsl_serdes.h>
++#include <asm/arch/ls102xa_stream_id.h>
++#include <asm/pcie_layerscape.h>
++#include <hwconfig.h>
+ #include <mmc.h>
+ #include <fsl_esdhc.h>
+ #include <fsl_ifc.h>
+ #include <fsl_sec.h>
++#include <spl.h>
+ 
+ #include "../common/qixis.h"
+ #include "ls1021aqds_qixis.h"
+@@ -21,9 +26,22 @@
+ #include "../../../drivers/qe/qe.h"
+ #endif
+ 
++#define PIN_MUX_SEL_CAN		0x03
++#define PIN_MUX_SEL_IIC2	0xa0
++#define PIN_MUX_SEL_RGMII	0x00
++#define PIN_MUX_SEL_SAI		0x0c
++#define PIN_MUX_SEL_SDHC	0x00
++
++#define SET_SDHC_MUX_SEL(reg, value)	((reg & 0x0f) | value)
++#define SET_EC_MUX_SEL(reg, value)	((reg & 0xf0) | value)
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+ enum {
++	MUX_TYPE_CAN,
++	MUX_TYPE_IIC2,
++	MUX_TYPE_RGMII,
++	MUX_TYPE_SAI,
++	MUX_TYPE_SDHC,
+ 	MUX_TYPE_SD_PCI4,
+ 	MUX_TYPE_SD_PC_SA_SG_SG,
+ 	MUX_TYPE_SD_PC_SA_PC_SG,
+@@ -32,11 +50,20 @@
+ 
+ int checkboard(void)
+ {
++#ifndef CONFIG_QSPI_BOOT
+ 	char buf[64];
++#endif
++#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT)
+ 	u8 sw;
++#endif
+ 
+ 	puts("Board: LS1021AQDS\n");
+ 
++#ifdef CONFIG_SD_BOOT
++	puts("SD\n");
++#elif CONFIG_QSPI_BOOT
++	puts("QSPI\n");
++#else
+ 	sw = QIXIS_READ(brdcfg[0]);
+ 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+ 
+@@ -50,13 +77,16 @@
+ 		printf("IFCCard\n");
+ 	else
+ 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
++#endif
+ 
++#ifndef CONFIG_QSPI_BOOT
+ 	printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n",
+ 	       QIXIS_READ(id), QIXIS_READ(arch));
+ 
+ 	printf("FPGA:  v%d (%s), build %d\n",
+ 	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
+ 	       (int)qixis_read_minor());
++#endif
+ 
+ 	return 0;
+ }
+@@ -101,8 +131,27 @@
+ 	return 66666666;
+ }
+ 
++int select_i2c_ch_pca9547(u8 ch)
++{
++	int ret;
++
++	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
++	if (ret) {
++		puts("PCA: failed to select proper channel\n");
++		return ret;
++	}
++
++	return 0;
++}
++
+ int dram_init(void)
+ {
++	/*
++	 * When resuming from deep sleep, the I2C channel may not be
++	 * in the default channel. So, switch to the default channel
++	 * before accessing DDR SPD.
++	 */
++	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ 	gd->ram_size = initdram(0);
+ 
+ 	return 0;
+@@ -121,19 +170,6 @@
+ }
+ #endif
+ 
+-int select_i2c_ch_pca9547(u8 ch)
+-{
+-	int ret;
+-
+-	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+-	if (ret) {
+-		puts("PCA: failed to select proper channel\n");
+-		return ret;
+-	}
+-
+-	return 0;
+-}
+-
+ int board_early_init_f(void)
+ {
+ 	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+@@ -148,6 +184,10 @@
+ 	init_early_memctl_regs();
+ #endif
+ 
++#ifdef CONFIG_FSL_QSPI
++	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
++#endif
++
+ 	/* Workaround for the issue that DDR could not respond to
+ 	 * barrier transaction which is generated by executing DSB/ISB
+ 	 * instruction. Set CCI-400 control override register to
+@@ -158,13 +198,75 @@
+ 	return 0;
+ }
+ 
++#ifdef CONFIG_SPL_BUILD
++void board_init_f(ulong dummy)
++{
++	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
++
++#ifdef CONFIG_NAND_BOOT
++	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
++	u32 porsr1, pinctl;
++
++	/*
++	 * There is LS1 SoC issue where NOR, FPGA are inaccessible during
++	 * NAND boot because IFC signals > IFC_AD7 are not enabled.
++	 * This workaround changes RCW source to make all signals enabled.
++	 */
++	porsr1 = in_be32(&gur->porsr1);
++	pinctl = ((porsr1 & ~(DCFG_CCSR_PORSR1_RCW_MASK)) |
++		 DCFG_CCSR_PORSR1_RCW_SRC_I2C);
++	out_be32((unsigned int *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1),
++		 pinctl);
++#endif
++
++	/* Set global data pointer */
++	gd = &gdata;
++
++	/* Clear the BSS */
++	memset(__bss_start, 0, __bss_end - __bss_start);
++
++#ifdef CONFIG_FSL_IFC
++	init_early_memctl_regs();
++#endif
++
++	get_clocks();
++
++	preloader_console_init();
++
++#ifdef CONFIG_SPL_I2C_SUPPORT
++	i2c_init_all();
++#endif
++	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
++
++	dram_init();
++
++	board_init_r(NULL, 0);
++}
++#endif
++
+ int config_board_mux(int ctrl_type)
+ {
+-	u8 reg12;
++	u8 reg12, reg14;
+ 
+ 	reg12 = QIXIS_READ(brdcfg[12]);
++	reg14 = QIXIS_READ(brdcfg[14]);
+ 
+ 	switch (ctrl_type) {
++	case MUX_TYPE_CAN:
++		reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN);
++		break;
++	case MUX_TYPE_IIC2:
++		reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_IIC2);
++		break;
++	case MUX_TYPE_RGMII:
++		reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII);
++		break;
++	case MUX_TYPE_SAI:
++		reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI);
++		break;
++	case MUX_TYPE_SDHC:
++		reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_SDHC);
++		break;
+ 	case MUX_TYPE_SD_PCI4:
+ 		reg12 = 0x38;
+ 		break;
+@@ -183,6 +285,7 @@
+ 	}
+ 
+ 	QIXIS_WRITE(brdcfg[12], reg12);
++	QIXIS_WRITE(brdcfg[14], reg14);
+ 
+ 	return 0;
+ }
+@@ -216,15 +319,154 @@
+ 	return 0;
+ }
+ 
+-#if defined(CONFIG_MISC_INIT_R)
+ int misc_init_r(void)
+ {
++	int conflict_flag;
++
++	/* some signals can not enable simultaneous*/
++	conflict_flag = 0;
++	if (hwconfig("sdhc"))
++		conflict_flag++;
++	if (hwconfig("iic2"))
++		conflict_flag++;
++	if (conflict_flag > 1) {
++		printf("WARNING: pin conflict !\n");
++		return 0;
++	}
++
++	conflict_flag = 0;
++	if (hwconfig("rgmii"))
++		conflict_flag++;
++	if (hwconfig("can"))
++		conflict_flag++;
++	if (hwconfig("sai"))
++		conflict_flag++;
++	if (conflict_flag > 1) {
++		printf("WARNING: pin conflict !\n");
++		return 0;
++	}
++
++	if (hwconfig("can"))
++		config_board_mux(MUX_TYPE_CAN);
++	else if (hwconfig("rgmii"))
++		config_board_mux(MUX_TYPE_RGMII);
++	else if (hwconfig("sai"))
++		config_board_mux(MUX_TYPE_SAI);
++
++	if (hwconfig("iic2"))
++		config_board_mux(MUX_TYPE_IIC2);
++	else if (hwconfig("sdhc"))
++		config_board_mux(MUX_TYPE_SDHC);
++
+ #ifdef CONFIG_FSL_CAAM
+ 	return sec_init();
+ #endif
++	return 0;
+ }
++
++#ifdef CONFIG_LS102XA_NS_ACCESS
++static struct csu_ns_dev ns_dev[] = {
++	{ CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
++	{ CSU_CSLX_PCIE1_IO, CSU_ALL_RW },
++	{ CSU_CSLX_MG2TPR_IP, CSU_ALL_RW },
++	{ CSU_CSLX_IFC_MEM, CSU_ALL_RW },
++	{ CSU_CSLX_OCRAM, CSU_ALL_RW },
++	{ CSU_CSLX_GIC, CSU_ALL_RW },
++	{ CSU_CSLX_PCIE1, CSU_ALL_RW },
++	{ CSU_CSLX_OCRAM2, CSU_ALL_RW },
++	{ CSU_CSLX_QSPI_MEM, CSU_ALL_RW },
++	{ CSU_CSLX_PCIE2, CSU_ALL_RW },
++	{ CSU_CSLX_SATA, CSU_ALL_RW },
++	{ CSU_CSLX_USB3, CSU_ALL_RW },
++	{ CSU_CSLX_SERDES, CSU_ALL_RW },
++	{ CSU_CSLX_QDMA, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART2, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART1, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART4, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART3, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART6, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART5, CSU_ALL_RW },
++	{ CSU_CSLX_DSPI2, CSU_ALL_RW },
++	{ CSU_CSLX_DSPI1, CSU_ALL_RW },
++	{ CSU_CSLX_QSPI, CSU_ALL_RW },
++	{ CSU_CSLX_ESDHC, CSU_ALL_RW },
++	{ CSU_CSLX_2D_ACE, CSU_ALL_RW },
++	{ CSU_CSLX_IFC, CSU_ALL_RW },
++	{ CSU_CSLX_I2C1, CSU_ALL_RW },
++	{ CSU_CSLX_USB2, CSU_ALL_RW },
++	{ CSU_CSLX_I2C3, CSU_ALL_RW },
++	{ CSU_CSLX_I2C2, CSU_ALL_RW },
++	{ CSU_CSLX_DUART2, CSU_ALL_RW },
++	{ CSU_CSLX_DUART1, CSU_ALL_RW },
++	{ CSU_CSLX_WDT2, CSU_ALL_RW },
++	{ CSU_CSLX_WDT1, CSU_ALL_RW },
++	{ CSU_CSLX_EDMA, CSU_ALL_RW },
++	{ CSU_CSLX_SYS_CNT, CSU_ALL_RW },
++	{ CSU_CSLX_DMA_MUX2, CSU_ALL_RW },
++	{ CSU_CSLX_DMA_MUX1, CSU_ALL_RW },
++	{ CSU_CSLX_DDR, CSU_ALL_RW },
++	{ CSU_CSLX_QUICC, CSU_ALL_RW },
++	{ CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW },
++	{ CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW },
++	{ CSU_CSLX_SFP, CSU_ALL_RW },
++	{ CSU_CSLX_TMU, CSU_ALL_RW },
++	{ CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW },
++	{ CSU_CSLX_RESERVED0, CSU_ALL_RW },
++	{ CSU_CSLX_ETSEC1, CSU_ALL_RW },
++	{ CSU_CSLX_SEC5_5, CSU_ALL_RW },
++	{ CSU_CSLX_ETSEC3, CSU_ALL_RW },
++	{ CSU_CSLX_ETSEC2, CSU_ALL_RW },
++	{ CSU_CSLX_GPIO2, CSU_ALL_RW },
++	{ CSU_CSLX_GPIO1, CSU_ALL_RW },
++	{ CSU_CSLX_GPIO4, CSU_ALL_RW },
++	{ CSU_CSLX_GPIO3, CSU_ALL_RW },
++	{ CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW },
++	{ CSU_CSLX_CSU, CSU_ALL_RW },
++	{ CSU_CSLX_ASRC, CSU_ALL_RW },
++	{ CSU_CSLX_SPDIF, CSU_ALL_RW },
++	{ CSU_CSLX_FLEXCAN2, CSU_ALL_RW },
++	{ CSU_CSLX_FLEXCAN1, CSU_ALL_RW },
++	{ CSU_CSLX_FLEXCAN4, CSU_ALL_RW },
++	{ CSU_CSLX_FLEXCAN3, CSU_ALL_RW },
++	{ CSU_CSLX_SAI2, CSU_ALL_RW },
++	{ CSU_CSLX_SAI1, CSU_ALL_RW },
++	{ CSU_CSLX_SAI4, CSU_ALL_RW },
++	{ CSU_CSLX_SAI3, CSU_ALL_RW },
++	{ CSU_CSLX_FTM2, CSU_ALL_RW },
++	{ CSU_CSLX_FTM1, CSU_ALL_RW },
++	{ CSU_CSLX_FTM4, CSU_ALL_RW },
++	{ CSU_CSLX_FTM3, CSU_ALL_RW },
++	{ CSU_CSLX_FTM6, CSU_ALL_RW },
++	{ CSU_CSLX_FTM5, CSU_ALL_RW },
++	{ CSU_CSLX_FTM8, CSU_ALL_RW },
++	{ CSU_CSLX_FTM7, CSU_ALL_RW },
++	{ CSU_CSLX_COP_DCSR, CSU_ALL_RW },
++	{ CSU_CSLX_EPU, CSU_ALL_RW },
++	{ CSU_CSLX_GDI, CSU_ALL_RW },
++	{ CSU_CSLX_DDI, CSU_ALL_RW },
++	{ CSU_CSLX_RESERVED1, CSU_ALL_RW },
++	{ CSU_CSLX_USB3_PHY, CSU_ALL_RW },
++	{ CSU_CSLX_RESERVED2, CSU_ALL_RW },
++};
+ #endif
+ 
++struct smmu_stream_id dev_stream_id[] = {
++	{ 0x100, 0x01, "ETSEC MAC1" },
++	{ 0x104, 0x02, "ETSEC MAC2" },
++	{ 0x108, 0x03, "ETSEC MAC3" },
++	{ 0x10c, 0x04, "PEX1" },
++	{ 0x110, 0x05, "PEX2" },
++	{ 0x114, 0x06, "qDMA" },
++	{ 0x118, 0x07, "SATA" },
++	{ 0x11c, 0x08, "USB3" },
++	{ 0x120, 0x09, "QE" },
++	{ 0x124, 0x0a, "eSDHC" },
++	{ 0x128, 0x0b, "eMA" },
++	{ 0x14c, 0x0c, "2D-ACE" },
++	{ 0x150, 0x0d, "USB2" },
++	{ 0x18c, 0x0e, "DEBUG" },
++};
++
+ int board_init(void)
+ {
+ 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+@@ -247,6 +489,13 @@
+ 	config_serdes_mux();
+ #endif
+ 
++	ls102xa_config_smmu_stream_id(dev_stream_id,
++				      ARRAY_SIZE(dev_stream_id));
++
++#ifdef CONFIG_LS102XA_NS_ACCESS
++	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
++#endif
++
+ #ifdef CONFIG_U_QE
+ 	u_qe_init();
+ #endif
+@@ -258,6 +507,10 @@
+ {
+ 	ft_cpu_setup(blob, bd);
+ 
++#ifdef CONFIG_PCIE_LAYERSCAPE
++	ft_pcie_setup(blob, bd);
++#endif
++
+ 	return 0;
+ }
+ 
+diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_pbi.cfg u-boot/board/freescale/ls1021aqds/ls102xa_pbi.cfg
+--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_pbi.cfg	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/freescale/ls1021aqds/ls102xa_pbi.cfg	2015-01-01 17:34:32.361501481 +0100
+@@ -0,0 +1,12 @@
++#PBI commands
++
++09570200 ffffffff
++09570158 00000300
++8940007c 21f47300
++
++#Configure Scratch register
++09ee0200 10000000
++#Configure alternate space
++09570158 00001000
++#Flush PBL data
++096100c0 000FFFFF
+diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg u-boot/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
+--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg	2015-01-01 17:34:32.361501481 +0100
+@@ -0,0 +1,7 @@
++#PBL preamble and RCW header
++aa55aa55 01ee0100
++# serdes protocol
++0608000a 00000000 00000000 00000000
++60000000 00407900 e0106a00 21046000
++00000000 00000000 00000000 00038000
++00000000 001b7200 00000000 00000000
+diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg u-boot/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
+--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg	2015-01-01 17:34:32.361501481 +0100
+@@ -0,0 +1,14 @@
++#PBL preamble and RCW header
++aa55aa55 01ee0100
++
++#enable IFC, disable QSPI and DSPI
++0608000a 00000000 00000000 00000000
++60000000 00407900 60040a00 21046000
++00000000 00000000 00000000 00038000
++00000000 001b7200 00000000 00000000
++
++#disable IFC, enable QSPI and DSPI
++#0608000a 00000000 00000000 00000000
++#60000000 00407900 60040a00 21046000
++#00000000 00000000 00000000 00038000
++#20024800 001b7200 00000000 00000000
+diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021aqds/MAINTAINERS u-boot/board/freescale/ls1021aqds/MAINTAINERS
+--- u-boot-2015.01-rc3/board/freescale/ls1021aqds/MAINTAINERS	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/ls1021aqds/MAINTAINERS	2015-01-01 17:34:32.361501481 +0100
+@@ -6,3 +6,6 @@
+ F:	configs/ls1021aqds_nor_defconfig
+ F:	configs/ls1021aqds_ddr4_nor_defconfig
+ F:	configs/ls1021aqds_nor_SECURE_BOOT_defconfig
++F:	configs/ls1021aqds_sdcard_defconfig
++F:	configs/ls1021aqds_qspi_defconfig
++F:	configs/ls1021aqds_nand_defconfig
+diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls1021atwr.c u-boot/board/freescale/ls1021atwr/ls1021atwr.c
+--- u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls1021atwr.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/ls1021atwr/ls1021atwr.c	2015-01-01 17:34:32.361501481 +0100
+@@ -8,8 +8,11 @@
+ #include <i2c.h>
+ #include <asm/io.h>
+ #include <asm/arch/immap_ls102xa.h>
++#include <asm/arch/ns_access.h>
+ #include <asm/arch/clock.h>
+ #include <asm/arch/fsl_serdes.h>
++#include <asm/arch/ls102xa_stream_id.h>
++#include <asm/pcie_layerscape.h>
+ #include <mmc.h>
+ #include <fsl_esdhc.h>
+ #include <fsl_ifc.h>
+@@ -17,6 +20,7 @@
+ #include <fsl_mdio.h>
+ #include <tsec.h>
+ #include <fsl_sec.h>
++#include <spl.h>
+ #ifdef CONFIG_U_QE
+ #include "../../../drivers/qe/qe.h"
+ #endif
+@@ -70,6 +74,7 @@
+ 	u8 rev2;		/* Reserved */
+ };
+ 
++#ifndef CONFIG_QSPI_BOOT
+ static void convert_serdes_mux(int type, int need_reset);
+ 
+ void cpld_show(void)
+@@ -105,11 +110,14 @@
+ 	       in_8(&cpld_data->serdes_mux));
+ #endif
+ }
++#endif
+ 
+ int checkboard(void)
+ {
+ 	puts("Board: LS1021ATWR\n");
++#ifndef CONFIG_QSPI_BOOT
+ 	cpld_show();
++#endif
+ 
+ 	return 0;
+ }
+@@ -218,6 +226,7 @@
+ }
+ #endif
+ 
++#ifndef CONFIG_QSPI_BOOT
+ int config_serdes_mux(void)
+ {
+ 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+@@ -249,6 +258,7 @@
+ 
+ 	return 0;
+ }
++#endif
+ 
+ int board_early_init_f(void)
+ {
+@@ -267,9 +277,135 @@
+ 	out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
+ #endif
+ 
++#ifdef CONFIG_FSL_QSPI
++	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
++#endif
++
+ 	return 0;
+ }
+ 
++#ifdef CONFIG_SPL_BUILD
++void board_init_f(ulong dummy)
++{
++	/* Set global data pointer */
++	gd = &gdata;
++
++	/* Clear the BSS */
++	memset(__bss_start, 0, __bss_end - __bss_start);
++
++	get_clocks();
++
++	preloader_console_init();
++
++	dram_init();
++
++	board_init_r(NULL, 0);
++}
++#endif
++
++#ifdef CONFIG_LS102XA_NS_ACCESS
++static struct csu_ns_dev ns_dev[] = {
++	{ CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
++	{ CSU_CSLX_PCIE1_IO, CSU_ALL_RW },
++	{ CSU_CSLX_MG2TPR_IP, CSU_ALL_RW },
++	{ CSU_CSLX_IFC_MEM, CSU_ALL_RW },
++	{ CSU_CSLX_OCRAM, CSU_ALL_RW },
++	{ CSU_CSLX_GIC, CSU_ALL_RW },
++	{ CSU_CSLX_PCIE1, CSU_ALL_RW },
++	{ CSU_CSLX_OCRAM2, CSU_ALL_RW },
++	{ CSU_CSLX_QSPI_MEM, CSU_ALL_RW },
++	{ CSU_CSLX_PCIE2, CSU_ALL_RW },
++	{ CSU_CSLX_SATA, CSU_ALL_RW },
++	{ CSU_CSLX_USB3, CSU_ALL_RW },
++	{ CSU_CSLX_SERDES, CSU_ALL_RW },
++	{ CSU_CSLX_QDMA, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART2, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART1, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART4, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART3, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART6, CSU_ALL_RW },
++	{ CSU_CSLX_LPUART5, CSU_ALL_RW },
++	{ CSU_CSLX_DSPI2, CSU_ALL_RW },
++	{ CSU_CSLX_DSPI1, CSU_ALL_RW },
++	{ CSU_CSLX_QSPI, CSU_ALL_RW },
++	{ CSU_CSLX_ESDHC, CSU_ALL_RW },
++	{ CSU_CSLX_2D_ACE, CSU_ALL_RW },
++	{ CSU_CSLX_IFC, CSU_ALL_RW },
++	{ CSU_CSLX_I2C1, CSU_ALL_RW },
++	{ CSU_CSLX_USB2, CSU_ALL_RW },
++	{ CSU_CSLX_I2C3, CSU_ALL_RW },
++	{ CSU_CSLX_I2C2, CSU_ALL_RW },
++	{ CSU_CSLX_DUART2, CSU_ALL_RW },
++	{ CSU_CSLX_DUART1, CSU_ALL_RW },
++	{ CSU_CSLX_WDT2, CSU_ALL_RW },
++	{ CSU_CSLX_WDT1, CSU_ALL_RW },
++	{ CSU_CSLX_EDMA, CSU_ALL_RW },
++	{ CSU_CSLX_SYS_CNT, CSU_ALL_RW },
++	{ CSU_CSLX_DMA_MUX2, CSU_ALL_RW },
++	{ CSU_CSLX_DMA_MUX1, CSU_ALL_RW },
++	{ CSU_CSLX_DDR, CSU_ALL_RW },
++	{ CSU_CSLX_QUICC, CSU_ALL_RW },
++	{ CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW },
++	{ CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW },
++	{ CSU_CSLX_SFP, CSU_ALL_RW },
++	{ CSU_CSLX_TMU, CSU_ALL_RW },
++	{ CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW },
++	{ CSU_CSLX_RESERVED0, CSU_ALL_RW },
++	{ CSU_CSLX_ETSEC1, CSU_ALL_RW },
++	{ CSU_CSLX_SEC5_5, CSU_ALL_RW },
++	{ CSU_CSLX_ETSEC3, CSU_ALL_RW },
++	{ CSU_CSLX_ETSEC2, CSU_ALL_RW },
++	{ CSU_CSLX_GPIO2, CSU_ALL_RW },
++	{ CSU_CSLX_GPIO1, CSU_ALL_RW },
++	{ CSU_CSLX_GPIO4, CSU_ALL_RW },
++	{ CSU_CSLX_GPIO3, CSU_ALL_RW },
++	{ CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW },
++	{ CSU_CSLX_CSU, CSU_ALL_RW },
++	{ CSU_CSLX_ASRC, CSU_ALL_RW },
++	{ CSU_CSLX_SPDIF, CSU_ALL_RW },
++	{ CSU_CSLX_FLEXCAN2, CSU_ALL_RW },
++	{ CSU_CSLX_FLEXCAN1, CSU_ALL_RW },
++	{ CSU_CSLX_FLEXCAN4, CSU_ALL_RW },
++	{ CSU_CSLX_FLEXCAN3, CSU_ALL_RW },
++	{ CSU_CSLX_SAI2, CSU_ALL_RW },
++	{ CSU_CSLX_SAI1, CSU_ALL_RW },
++	{ CSU_CSLX_SAI4, CSU_ALL_RW },
++	{ CSU_CSLX_SAI3, CSU_ALL_RW },
++	{ CSU_CSLX_FTM2, CSU_ALL_RW },
++	{ CSU_CSLX_FTM1, CSU_ALL_RW },
++	{ CSU_CSLX_FTM4, CSU_ALL_RW },
++	{ CSU_CSLX_FTM3, CSU_ALL_RW },
++	{ CSU_CSLX_FTM6, CSU_ALL_RW },
++	{ CSU_CSLX_FTM5, CSU_ALL_RW },
++	{ CSU_CSLX_FTM8, CSU_ALL_RW },
++	{ CSU_CSLX_FTM7, CSU_ALL_RW },
++	{ CSU_CSLX_COP_DCSR, CSU_ALL_RW },
++	{ CSU_CSLX_EPU, CSU_ALL_RW },
++	{ CSU_CSLX_GDI, CSU_ALL_RW },
++	{ CSU_CSLX_DDI, CSU_ALL_RW },
++	{ CSU_CSLX_RESERVED1, CSU_ALL_RW },
++	{ CSU_CSLX_USB3_PHY, CSU_ALL_RW },
++	{ CSU_CSLX_RESERVED2, CSU_ALL_RW },
++};
++#endif
++
++struct smmu_stream_id dev_stream_id[] = {
++	{ 0x100, 0x01, "ETSEC MAC1" },
++	{ 0x104, 0x02, "ETSEC MAC2" },
++	{ 0x108, 0x03, "ETSEC MAC3" },
++	{ 0x10c, 0x04, "PEX1" },
++	{ 0x110, 0x05, "PEX2" },
++	{ 0x114, 0x06, "qDMA" },
++	{ 0x118, 0x07, "SATA" },
++	{ 0x11c, 0x08, "USB3" },
++	{ 0x120, 0x09, "QE" },
++	{ 0x124, 0x0a, "eSDHC" },
++	{ 0x128, 0x0b, "eMA" },
++	{ 0x14c, 0x0c, "2D-ACE" },
++	{ 0x150, 0x0d, "USB2" },
++	{ 0x18c, 0x0e, "DEBUG" },
++};
++
+ int board_init(void)
+ {
+ 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+@@ -284,8 +420,17 @@
+ 
+ #ifndef CONFIG_SYS_FSL_NO_SERDES
+ 	fsl_serdes_init();
++#ifndef CONFIG_QSPI_BOOT
+ 	config_serdes_mux();
+ #endif
++#endif
++
++	ls102xa_config_smmu_stream_id(dev_stream_id,
++				      ARRAY_SIZE(dev_stream_id));
++
++#ifdef CONFIG_LS102XA_NS_ACCESS
++	enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
++#endif
+ 
+ #ifdef CONFIG_U_QE
+ 	u_qe_init();
+@@ -307,6 +452,10 @@
+ {
+ 	ft_cpu_setup(blob, bd);
+ 
++#ifdef CONFIG_PCIE_LAYERSCAPE
++	ft_pcie_setup(blob, bd);
++#endif
++
+ 	return 0;
+ }
+ 
+@@ -329,6 +478,7 @@
+ 	return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
+ }
+ 
++#ifndef CONFIG_QSPI_BOOT
+ static void convert_flash_bank(char bank)
+ {
+ 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+@@ -511,3 +661,4 @@
+ 	"	-change lane C & lane D to PCIeX2\n"
+ 	"\nWARNING: If you aren't familiar with the setting of serdes, don't try to change anything!\n"
+ );
++#endif
+diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_pbi.cfg u-boot/board/freescale/ls1021atwr/ls102xa_pbi.cfg
+--- u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_pbi.cfg	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/freescale/ls1021atwr/ls102xa_pbi.cfg	2015-01-01 17:34:32.361501481 +0100
+@@ -0,0 +1,12 @@
++#PBI commands
++
++09570200 ffffffff
++09570158 00000300
++8940007c 21f47300
++
++#Configure Scratch register
++09ee0200 10000000
++#Configure alternate space
++09570158 00001000
++#Flush PBL data
++096100c0 000FFFFF
+diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg u-boot/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
+--- u-boot-2015.01-rc3/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg	2015-01-01 17:34:32.361501481 +0100
+@@ -0,0 +1,14 @@
++#PBL preamble and RCW header
++aa55aa55 01ee0100
++
++#enable IFC, disable QSPI and DSPI
++0608000a 00000000 00000000 00000000
++20000000 00407900 60040a00 21046000
++00000000 00000000 00000000 00038000
++00080000 881b7340 00000000 00000000
++
++#disable IFC, enable QSPI and DSPI
++#0608000a 00000000 00000000 00000000
++#20000000 00407900 60040a00 21046000
++#00000000 00000000 00000000 00038000
++#20084800 881b7340 00000000 00000000
+diff -ruN u-boot-2015.01-rc3/board/freescale/ls1021atwr/MAINTAINERS u-boot/board/freescale/ls1021atwr/MAINTAINERS
+--- u-boot-2015.01-rc3/board/freescale/ls1021atwr/MAINTAINERS	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/ls1021atwr/MAINTAINERS	2015-01-01 17:34:32.361501481 +0100
+@@ -5,3 +5,5 @@
+ F:	include/configs/ls1021atwr.h
+ F:	configs/ls1021atwr_nor_defconfig
+ F:	configs/ls1021atwr_nor_SECURE_BOOT_defconfig
++F:	configs/ls1021atwr_sdcard_defconfig
++F:	configs/ls1021atwr_qspi_defconfig
+diff -ruN u-boot-2015.01-rc3/board/freescale/mx6slevk/mx6slevk.c u-boot/board/freescale/mx6slevk/mx6slevk.c
+--- u-boot-2015.01-rc3/board/freescale/mx6slevk/mx6slevk.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/mx6slevk/mx6slevk.c	2015-01-01 17:34:32.381501153 +0100
+@@ -20,6 +20,8 @@
+ #include <fsl_esdhc.h>
+ #include <mmc.h>
+ #include <netdev.h>
++#include <usb.h>
++#include <usb/ehci-fsl.h>
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+@@ -234,10 +236,52 @@
+ 	/* clear gpr1[14], gpr1[18:17] to select anatop clock */
+ 	clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
+ 
+-	return enable_fec_anatop_clock(ENET_50MHz);
++	return enable_fec_anatop_clock(ENET_50MHZ);
+ }
+ #endif
+ 
++#ifdef CONFIG_USB_EHCI_MX6
++#define USB_OTHERREGS_OFFSET	0x800
++#define UCTRL_PWR_POL		(1 << 9)
++
++static iomux_v3_cfg_t const usb_otg_pads[] = {
++	/* OTG1 */
++	MX6_PAD_KEY_COL4__USB_USBOTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
++	MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
++	/* OTG2 */
++	MX6_PAD_KEY_COL5__USB_USBOTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
++};
++
++static void setup_usb(void)
++{
++	imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
++					 ARRAY_SIZE(usb_otg_pads));
++}
++
++int board_usb_phy_mode(int port)
++{
++	if (port == 1)
++		return USB_INIT_HOST;
++	else
++		return usb_phy_mode(port);
++}
++
++int board_ehci_hcd_init(int port)
++{
++	u32 *usbnc_usb_ctrl;
++
++	if (port > 1)
++		return -EINVAL;
++
++	usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
++				 port * 4);
++
++	/* Set Power polarity */
++	setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
++
++	return 0;
++}
++#endif
+ 
+ int board_early_init_f(void)
+ {
+@@ -256,6 +300,11 @@
+ #ifdef	CONFIG_FEC_MXC
+ 	setup_fec();
+ #endif
++
++#ifdef CONFIG_USB_EHCI_MX6
++	setup_usb();
++#endif
++
+ 	return 0;
+ }
+ 
+diff -ruN u-boot-2015.01-rc3/board/freescale/mx6sxsabresd/mx6sxsabresd.c u-boot/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+--- u-boot-2015.01-rc3/board/freescale/mx6sxsabresd/mx6sxsabresd.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/mx6sxsabresd/mx6sxsabresd.c	2015-01-01 17:34:32.381501153 +0100
+@@ -26,6 +26,8 @@
+ #include <power/pmic.h>
+ #include <power/pfuze100_pmic.h>
+ #include "../common/pfuze.h"
++#include <usb.h>
++#include <usb/ehci-fsl.h>
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+@@ -168,7 +170,7 @@
+ 	reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE;
+ 	writel(reg, &anatop->pll_enet);
+ 
+-	return enable_fec_anatop_clock(ENET_125MHz);
++	return enable_fec_anatop_clock(ENET_125MHZ);
+ }
+ 
+ int board_eth_init(bd_t *bis)
+@@ -212,6 +214,49 @@
+ 	return 0;
+ }
+ 
++#ifdef CONFIG_USB_EHCI_MX6
++#define USB_OTHERREGS_OFFSET	0x800
++#define UCTRL_PWR_POL		(1 << 9)
++
++static iomux_v3_cfg_t const usb_otg_pads[] = {
++	/* OGT1 */
++	MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
++	MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
++	/* OTG2 */
++	MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
++};
++
++static void setup_usb(void)
++{
++	imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
++					 ARRAY_SIZE(usb_otg_pads));
++}
++
++int board_usb_phy_mode(int port)
++{
++	if (port == 1)
++		return USB_INIT_HOST;
++	else
++		return usb_phy_mode(port);
++}
++
++int board_ehci_hcd_init(int port)
++{
++	u32 *usbnc_usb_ctrl;
++
++	if (port > 1)
++		return -EINVAL;
++
++	usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
++				 port * 4);
++
++	/* Set Power polarity */
++	setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
++
++	return 0;
++}
++#endif
++
+ int board_phy_config(struct phy_device *phydev)
+ {
+ 	/*
+@@ -242,6 +287,10 @@
+ 	/* Active high for ncp692 */
+ 	gpio_direction_output(IMX_GPIO_NR(4, 16) , 1);
+ 
++#ifdef CONFIG_USB_EHCI_MX6
++	setup_usb();
++#endif
++
+ 	return 0;
+ }
+ 
+@@ -322,7 +371,6 @@
+ 	return 0;
+ }
+ 
+-
+ int board_init(void)
+ {
+ 	/* Address of boot parameters */
+diff -ruN u-boot-2015.01-rc3/board/freescale/t104xrdb/ddr.c u-boot/board/freescale/t104xrdb/ddr.c
+--- u-boot-2015.01-rc3/board/freescale/t104xrdb/ddr.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/t104xrdb/ddr.c	2015-01-01 17:34:32.389501022 +0100
+@@ -11,6 +11,7 @@
+ #include <fsl_ddr_sdram.h>
+ #include <fsl_ddr_dimm_params.h>
+ #include <asm/fsl_law.h>
++#include <asm/mpc85xx_gpio.h>
+ #include "ddr.h"
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+@@ -109,6 +110,19 @@
+ 	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+ }
+ 
++#if defined(CONFIG_DEEP_SLEEP)
++void board_mem_sleep_setup(void)
++{
++	void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE;
++
++	/* does not provide HW signals for power management */
++	clrbits_8(cpld_base + 0x17, 0x40);
++	/* Disable MCKE isolation */
++	gpio_set_value(2, 0);
++	udelay(1);
++}
++#endif
++
+ phys_size_t initdram(int board_type)
+ {
+ 	phys_size_t dram_size;
+@@ -124,5 +138,10 @@
+ #else
+ 	dram_size =  fsl_ddr_sdram_size();
+ #endif
++
++#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
++	fsl_dp_resume();
++#endif
++
+ 	return dram_size;
+ }
+diff -ruN u-boot-2015.01-rc3/board/freescale/t104xrdb/spl.c u-boot/board/freescale/t104xrdb/spl.c
+--- u-boot-2015.01-rc3/board/freescale/t104xrdb/spl.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/t104xrdb/spl.c	2015-01-01 17:34:32.389501022 +0100
+@@ -11,7 +11,7 @@
+ #include <mmc.h>
+ #include <fsl_esdhc.h>
+ #include <spi_flash.h>
+-#include <asm/mpc85xx_gpio.h>
++#include "../common/sleep.h"
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+@@ -64,8 +64,8 @@
+ 
+ #ifdef CONFIG_DEEP_SLEEP
+ 	/* disable the console if boot from deep sleep */
+-	if (in_be32(&gur->scrtsr[0]) & (1 << 3))
+-		gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
++	if (is_warm_boot())
++		fsl_dp_disable_console();
+ #endif
+ 	/* compiler optimization barrier needed for GCC >= 3.4 */
+ 	__asm__ __volatile__("" : : : "memory");
+@@ -132,16 +132,3 @@
+ 	nand_boot();
+ #endif
+ }
+-
+-#ifdef CONFIG_DEEP_SLEEP
+-void board_mem_sleep_setup(void)
+-{
+-	void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE;
+-
+-	/* does not provide HW signals for power management */
+-	clrbits_8(cpld_base + 0x17, 0x40);
+-	/* Disable MCKE isolation */
+-	gpio_set_value(2, 0);
+-	udelay(1);
+-}
+-#endif
+diff -ruN u-boot-2015.01-rc3/board/freescale/t104xrdb/t104xrdb.c u-boot/board/freescale/t104xrdb/t104xrdb.c
+--- u-boot-2015.01-rc3/board/freescale/t104xrdb/t104xrdb.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/freescale/t104xrdb/t104xrdb.c	2015-01-01 17:34:32.389501022 +0100
+@@ -17,8 +17,7 @@
+ #include <asm/fsl_portals.h>
+ #include <asm/fsl_liodn.h>
+ #include <fm_eth.h>
+-#include <asm/mpc85xx_gpio.h>
+-
++#include "../common/sleep.h"
+ #include "t104xrdb.h"
+ #include "cpld.h"
+ 
+@@ -44,6 +43,16 @@
+ 	return 0;
+ }
+ 
++int board_early_init_f(void)
++{
++#if defined(CONFIG_DEEP_SLEEP)
++	if (is_warm_boot())
++		fsl_dp_disable_console();
++#endif
++
++	return 0;
++}
++
+ int board_early_init_r(void)
+ {
+ #ifdef CONFIG_SYS_FLASH_BASE
+@@ -113,14 +122,3 @@
+ 
+ 	return 0;
+ }
+-
+-#ifdef CONFIG_DEEP_SLEEP
+-void board_mem_sleep_setup(void)
+-{
+-	/* does not provide HW signals for power management */
+-	CPLD_WRITE(misc_ctl_status, (CPLD_READ(misc_ctl_status) & ~0x40));
+-	/* Disable MCKE isolation */
+-	gpio_set_value(2, 0);
+-	udelay(1);
+-}
+-#endif
+diff -ruN u-boot-2015.01-rc3/board/google/chromebook_link/Kconfig u-boot/board/google/chromebook_link/Kconfig
+--- u-boot-2015.01-rc3/board/google/chromebook_link/Kconfig	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/google/chromebook_link/Kconfig	2015-01-01 17:34:32.401500826 +0100
+@@ -19,6 +19,7 @@
+ 	select SOUTHBRIDGE_INTEL_C216
+ 	select HAVE_ACPI_RESUME
+ 	select MARK_GRAPHICS_MEM_WRCOMB
++	select BOARD_ROMSIZE_KB_8192
+ 
+ config MMCONF_BASE_ADDRESS
+ 	hex
+diff -ruN u-boot-2015.01-rc3/board/google/chromebook_link/link.c u-boot/board/google/chromebook_link/link.c
+--- u-boot-2015.01-rc3/board/google/chromebook_link/link.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/google/chromebook_link/link.c	2015-01-01 17:34:32.401500826 +0100
+@@ -7,6 +7,9 @@
+ #include <common.h>
+ #include <cros_ec.h>
+ #include <asm/gpio.h>
++#include <asm/io.h>
++#include <asm/pci.h>
++#include <asm/arch/pch.h>
+ 
+ int arch_early_init_r(void)
+ {
+@@ -121,3 +124,40 @@
+ 
+ 	return 0;
+ }
++
++void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
++{
++	/* GPIO Set 1 */
++	if (gpio->set1.level)
++		outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL);
++	if (gpio->set1.mode)
++		outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL);
++	if (gpio->set1.direction)
++		outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL);
++	if (gpio->set1.reset)
++		outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1);
++	if (gpio->set1.invert)
++		outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV);
++	if (gpio->set1.blink)
++		outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK);
++
++	/* GPIO Set 2 */
++	if (gpio->set2.level)
++		outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2);
++	if (gpio->set2.mode)
++		outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2);
++	if (gpio->set2.direction)
++		outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2);
++	if (gpio->set2.reset)
++		outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2);
++
++	/* GPIO Set 3 */
++	if (gpio->set3.level)
++		outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3);
++	if (gpio->set3.mode)
++		outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3);
++	if (gpio->set3.direction)
++		outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3);
++	if (gpio->set3.reset)
++		outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3);
++}
+diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/crownbay.c u-boot/board/intel/crownbay/crownbay.c
+--- u-boot-2015.01-rc3/board/intel/crownbay/crownbay.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/intel/crownbay/crownbay.c	2015-01-01 17:34:32.405500760 +0100
+@@ -0,0 +1,32 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/ibmpc.h>
++#include <asm/pnp_def.h>
++#include <netdev.h>
++#include <smsc_lpc47m.h>
++
++#define SERIAL_DEV PNP_DEV(0x2e, 4)
++
++DECLARE_GLOBAL_DATA_PTR;
++
++int board_early_init_f(void)
++{
++	lpc47m_enable_serial(SERIAL_DEV, UART0_BASE);
++
++	return 0;
++}
++
++void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
++{
++	return;
++}
++
++int board_eth_init(bd_t *bis)
++{
++	return pci_eth_init(bis);
++}
+diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/Kconfig u-boot/board/intel/crownbay/Kconfig
+--- u-boot-2015.01-rc3/board/intel/crownbay/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/intel/crownbay/Kconfig	2015-01-01 17:34:32.405500760 +0100
+@@ -0,0 +1,20 @@
++if TARGET_CROWNBAY
++
++config SYS_BOARD
++	default "crownbay"
++
++config SYS_VENDOR
++	default "intel"
++
++config SYS_SOC
++	default "queensbay"
++
++config SYS_CONFIG_NAME
++	default "crownbay"
++
++config BOARD_SPECIFIC_OPTIONS # dummy
++	def_bool y
++	select INTEL_QUEENSBAY
++	select BOARD_ROMSIZE_KB_1024
++
++endif
+diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/MAINTAINERS u-boot/board/intel/crownbay/MAINTAINERS
+--- u-boot-2015.01-rc3/board/intel/crownbay/MAINTAINERS	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/intel/crownbay/MAINTAINERS	2015-01-01 17:34:32.405500760 +0100
+@@ -0,0 +1,6 @@
++INTEL CROWNBAY BOARD
++M:	Bin Meng <bmeng.cn@gmail.com>
++S:	Maintained
++F:	board/intel/crownbay/
++F:	include/configs/crownbay.h
++F:	configs/crownbay_defconfig
+diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/Makefile u-boot/board/intel/crownbay/Makefile
+--- u-boot-2015.01-rc3/board/intel/crownbay/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/intel/crownbay/Makefile	2015-01-01 17:34:32.405500760 +0100
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++#
++# SPDX-License-Identifier:	GPL-2.0+
++#
++
++obj-y	+= crownbay.o start.o
+diff -ruN u-boot-2015.01-rc3/board/intel/crownbay/start.S u-boot/board/intel/crownbay/start.S
+--- u-boot-2015.01-rc3/board/intel/crownbay/start.S	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/intel/crownbay/start.S	2015-01-01 17:34:32.405500760 +0100
+@@ -0,0 +1,9 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++.globl early_board_init
++early_board_init:
++	jmp	early_board_init_ret
+diff -ruN u-boot-2015.01-rc3/board/nvidia/cardhu/cardhu.c u-boot/board/nvidia/cardhu/cardhu.c
+--- u-boot-2015.01-rc3/board/nvidia/cardhu/cardhu.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/nvidia/cardhu/cardhu.c	2015-01-01 17:34:32.449500039 +0100
+@@ -6,6 +6,7 @@
+  */
+ 
+ #include <common.h>
++#include <dm.h>
+ #include <asm/arch/pinmux.h>
+ #include <asm/arch/gp_padctrl.h>
+ #include "pinmux-config-cardhu.h"
+@@ -37,17 +38,23 @@
+  */
+ void board_sdmmc_voltage_init(void)
+ {
++	struct udevice *dev;
+ 	uchar reg, data_buffer[1];
++	int ret;
+ 	int i;
+ 
+-	i2c_set_bus_num(0);	/* PMU is on bus 0 */
++	ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
++	if (ret) {
++		debug("%s: Cannot find PMIC I2C chip\n", __func__);
++		return;
++	}
+ 
+ 	/* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */
+ 	data_buffer[0] = 0x65;
+ 	reg = 0x32;
+ 
+ 	for (i = 0; i < MAX_I2C_RETRY; ++i) {
+-		if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
++		if (i2c_write(dev, reg, data_buffer, 1))
+ 			udelay(100);
+ 	}
+ 
+@@ -56,7 +63,7 @@
+ 	reg = 0x67;
+ 
+ 	for (i = 0; i < MAX_I2C_RETRY; ++i) {
+-		if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
++		if (i2c_write(dev, reg, data_buffer, 1))
+ 			udelay(100);
+ 	}
+ }
+diff -ruN u-boot-2015.01-rc3/board/nvidia/common/board.c u-boot/board/nvidia/common/board.c
+--- u-boot-2015.01-rc3/board/nvidia/common/board.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/nvidia/common/board.c	2015-01-01 17:34:32.453499973 +0100
+@@ -113,10 +113,6 @@
+ 	power_det_init();
+ 
+ #ifdef CONFIG_SYS_I2C_TEGRA
+-#ifndef CONFIG_SYS_I2C_INIT_BOARD
+-#error "You must define CONFIG_SYS_I2C_INIT_BOARD to use i2c on Nvidia boards"
+-#endif
+-	i2c_init_board();
+ # ifdef CONFIG_TEGRA_PMU
+ 	if (pmu_set_nominal())
+ 		debug("Failed to select nominal voltages\n");
+diff -ruN u-boot-2015.01-rc3/board/nvidia/dalmore/dalmore.c u-boot/board/nvidia/dalmore/dalmore.c
+--- u-boot-2015.01-rc3/board/nvidia/dalmore/dalmore.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/nvidia/dalmore/dalmore.c	2015-01-01 17:34:32.453499973 +0100
+@@ -15,6 +15,7 @@
+  */
+ 
+ #include <common.h>
++#include <dm.h>
+ #include <asm/arch/pinmux.h>
+ #include <asm/arch/gp_padctrl.h>
+ #include "pinmux-config-dalmore.h"
+@@ -50,18 +51,21 @@
+  */
+ void board_sdmmc_voltage_init(void)
+ {
++	struct udevice *dev;
+ 	uchar reg, data_buffer[1];
+ 	int ret;
+ 
+-	ret = i2c_set_bus_num(0);/* PMU is on bus 0 */
+-	if (ret)
+-		printf("%s: i2c_set_bus_num returned %d\n", __func__, ret);
++	ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
++	if (ret) {
++		debug("%s: Cannot find PMIC I2C chip\n", __func__);
++		return;
++	}
+ 
+ 	/* TPS65913: LDO9_VOLTAGE = 3.3V */
+ 	data_buffer[0] = 0x31;
+ 	reg = 0x61;
+ 
+-	ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
++	ret = i2c_write(dev, reg, data_buffer, 1);
+ 	if (ret)
+ 		printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
+ 			__func__, reg, data_buffer[0], ret);
+@@ -70,7 +74,7 @@
+ 	data_buffer[0] = 0x01;
+ 	reg = 0x60;
+ 
+-	ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
++	ret = i2c_write(dev, reg, data_buffer, 1);
+ 	if (ret)
+ 		printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
+ 			__func__, reg, data_buffer[0], ret);
+@@ -79,7 +83,12 @@
+ 	data_buffer[0] = 0x03;
+ 	reg = 0x14;
+ 
+-	ret = i2c_write(BAT_I2C_ADDRESS, reg, 1, data_buffer, 1);
++	ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, &dev);
++	if (ret) {
++		debug("%s: Cannot find charger I2C chip\n", __func__);
++		return;
++	}
++	ret = i2c_write(dev, reg, data_buffer, 1);
+ 	if (ret)
+ 		printf("%s: BAT i2c_write %02X<-%02X returned %d\n",
+ 			__func__, reg, data_buffer[0], ret);
+diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/Kconfig u-boot/board/nvidia/nyan-big/Kconfig
+--- u-boot-2015.01-rc3/board/nvidia/nyan-big/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/nvidia/nyan-big/Kconfig	2015-01-01 17:34:32.453499973 +0100
+@@ -0,0 +1,24 @@
++if TARGET_NYAN_BIG
++
++config SYS_CPU
++	string
++	default "arm720t" if SPL_BUILD
++	default "armv7" if !SPL_BUILD
++
++config SYS_BOARD
++	string
++	default "nyan-big"
++
++config SYS_VENDOR
++	string
++	default "nvidia"
++
++config SYS_SOC
++	string
++	default "tegra124"
++
++config SYS_CONFIG_NAME
++	string
++	default "nyan-big"
++
++endif
+diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/MAINTAINERS u-boot/board/nvidia/nyan-big/MAINTAINERS
+--- u-boot-2015.01-rc3/board/nvidia/nyan-big/MAINTAINERS	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/nvidia/nyan-big/MAINTAINERS	2015-01-01 17:34:32.453499973 +0100
+@@ -0,0 +1,6 @@
++NORRIN BOARD
++M:	Allen Martin <amartin@nvidia.com>
++S:	Maintained
++F:	board/nvidia/nyan-big/
++F:	include/configs/nyan-big.h
++F:	configs/nyan-big_defconfig
+diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/Makefile u-boot/board/nvidia/nyan-big/Makefile
+--- u-boot-2015.01-rc3/board/nvidia/nyan-big/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/nvidia/nyan-big/Makefile	2015-01-01 17:34:32.453499973 +0100
+@@ -0,0 +1,9 @@
++#
++# (C) Copyright 2014
++# NVIDIA Corporation <www.nvidia.com>
++#
++# SPDX-License-Identifier:     GPL-2.0+
++#
++
++obj-y	+= ../venice2/as3722_init.o
++obj-y	+= nyan-big.o
+diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/nyan-big.c u-boot/board/nvidia/nyan-big/nyan-big.c
+--- u-boot-2015.01-rc3/board/nvidia/nyan-big/nyan-big.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/nvidia/nyan-big/nyan-big.c	2015-01-01 17:34:32.453499973 +0100
+@@ -0,0 +1,27 @@
++/*
++ * (C) Copyright 2014
++ * NVIDIA Corporation <www.nvidia.com>
++ *
++ * SPDX-License-Identifier:     GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/pinmux.h>
++#include "pinmux-config-nyan-big.h"
++
++/*
++ * Routine: pinmux_init
++ * Description: Do individual peripheral pinmux configs
++ */
++void pinmux_init(void)
++{
++	gpio_config_table(nyan_big_gpio_inits,
++			  ARRAY_SIZE(nyan_big_gpio_inits));
++
++	pinmux_config_pingrp_table(nyan_big_pingrps,
++				   ARRAY_SIZE(nyan_big_pingrps));
++
++	pinmux_config_drvgrp_table(nyan_big_drvgrps,
++				   ARRAY_SIZE(nyan_big_drvgrps));
++}
+diff -ruN u-boot-2015.01-rc3/board/nvidia/nyan-big/pinmux-config-nyan-big.h u-boot/board/nvidia/nyan-big/pinmux-config-nyan-big.h
+--- u-boot-2015.01-rc3/board/nvidia/nyan-big/pinmux-config-nyan-big.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/nvidia/nyan-big/pinmux-config-nyan-big.h	2015-01-01 17:34:32.453499973 +0100
+@@ -0,0 +1,287 @@
++/*
++ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef _PINMUX_CONFIG_NYAN_BIG_H_
++#define _PINMUX_CONFIG_NYAN_BIG_H_
++
++#define GPIO_INIT(_gpio, _init)				\
++	{						\
++		.gpio	= GPIO_P##_gpio,		\
++		.init	= TEGRA_GPIO_INIT_##_init,	\
++	}
++
++static const struct tegra_gpio_config nyan_big_gpio_inits[] = {
++	/*        gpio, init_val */
++	GPIO_INIT(A0,   IN),
++	GPIO_INIT(C7,   IN),
++	GPIO_INIT(G0,   IN),
++	GPIO_INIT(G1,   IN),
++	GPIO_INIT(G2,   IN),
++	GPIO_INIT(G3,   IN),
++	GPIO_INIT(H2,   IN),
++	GPIO_INIT(H4,   IN),
++	GPIO_INIT(H6,   IN),
++	GPIO_INIT(H7,   OUT1),
++	GPIO_INIT(I0,   IN),
++	GPIO_INIT(I1,   IN),
++	GPIO_INIT(I5,   OUT1),
++	GPIO_INIT(I6,   IN),
++	GPIO_INIT(I7,   IN),
++	GPIO_INIT(J0,   IN),
++	GPIO_INIT(J7,   IN),
++	GPIO_INIT(K1,   OUT0),
++	GPIO_INIT(K2,   IN),
++	GPIO_INIT(K4,   OUT0),
++	GPIO_INIT(K6,   OUT0),
++	GPIO_INIT(K7,   IN),
++	GPIO_INIT(N7,   IN),
++	GPIO_INIT(P2,   OUT0),
++	GPIO_INIT(Q0,   IN),
++	GPIO_INIT(Q2,   IN),
++	GPIO_INIT(Q3,   IN),
++	GPIO_INIT(Q6,   IN),
++	GPIO_INIT(Q7,   IN),
++	GPIO_INIT(R0,   OUT0),
++	GPIO_INIT(R1,   IN),
++	GPIO_INIT(R4,   IN),
++	GPIO_INIT(R7,   IN),
++	GPIO_INIT(S3,   OUT0),
++	GPIO_INIT(S4,   OUT0),
++	GPIO_INIT(S7,   IN),
++	GPIO_INIT(T1,   IN),
++	GPIO_INIT(U4,   IN),
++	GPIO_INIT(U5,   IN),
++	GPIO_INIT(U6,   IN),
++	GPIO_INIT(V0,   IN),
++	GPIO_INIT(W3,   IN),
++	GPIO_INIT(X1,   IN),
++	GPIO_INIT(X4,   IN),
++	GPIO_INIT(X7,   OUT0),
++};
++
++#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _rcv_sel)	\
++	{							\
++		.pingrp		= PMUX_PINGRP_##_pingrp,	\
++		.func		= PMUX_FUNC_##_mux,		\
++		.pull		= PMUX_PULL_##_pull,		\
++		.tristate	= PMUX_TRI_##_tri,		\
++		.io		= PMUX_PIN_##_io,		\
++		.od		= PMUX_PIN_OD_##_od,		\
++		.rcv_sel	= PMUX_PIN_RCV_SEL_##_rcv_sel,	\
++		.lock		= PMUX_PIN_LOCK_DEFAULT,	\
++		.ioreset	= PMUX_PIN_IO_RESET_DEFAULT,	\
++	}
++
++static const struct pmux_pingrp_config nyan_big_pingrps[] = {
++	/*     pingrp,                 mux,         pull,   tri,      e_input, od,      rcv_sel */
++	PINCFG(CLK_32K_OUT_PA0,        DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(UART3_CTS_N_PA1,        GMI,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP2_FS_PA2,            I2S1,        NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(DAP2_SCLK_PA3,          I2S1,        NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(DAP2_DIN_PA4,           I2S1,        NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(DAP2_DOUT_PA5,          I2S1,        NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC3_CLK_PA6,         SDMMC3,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(SDMMC3_CMD_PA7,         SDMMC3,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PB0,                    RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PB1,                    RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(SDMMC3_DAT3_PB4,        SDMMC3,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC3_DAT2_PB5,        SDMMC3,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC3_DAT1_PB6,        SDMMC3,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC3_DAT0_PB7,        SDMMC3,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(UART3_RTS_N_PC0,        GMI,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(UART2_TXD_PC2,          IRDA,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(UART2_RXD_PC3,          IRDA,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(GEN1_I2C_SCL_PC4,       I2C1,        NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
++	PINCFG(GEN1_I2C_SDA_PC5,       I2C1,        NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
++	PINCFG(PC7,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PG0,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PG1,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PG2,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PG3,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PG4,                    SPI4,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PG5,                    SPI4,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PG6,                    SPI4,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PG7,                    SPI4,        NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PH0,                    GMI,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PH1,                    PWM1,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PH2,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PH3,                    GMI,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PH4,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PH5,                    RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PH6,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PH7,                    DEFAULT,     NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PI0,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PI1,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PI2,                    RSVD4,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PI3,                    SPI4,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PI4,                    GMI,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PI5,                    DEFAULT,     UP,     NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PI6,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PI7,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PJ0,                    DEFAULT,     UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PJ2,                    RSVD1,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(UART2_CTS_N_PJ5,        GMI,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(UART2_RTS_N_PJ6,        GMI,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PJ7,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PK0,                    RSVD1,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PK1,                    DEFAULT,     NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PK2,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PK3,                    GMI,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PK4,                    DEFAULT,     UP,     NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(SPDIF_OUT_PK5,          RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(SPDIF_IN_PK6,           DEFAULT,     DOWN,   NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PK7,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(DAP1_FS_PN0,            RSVD4,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP1_DIN_PN1,           RSVD4,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP1_DOUT_PN2,          I2S0,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP1_SCLK_PN3,          RSVD4,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(USB_VBUS_EN0_PN4,       USB,         NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
++	PINCFG(USB_VBUS_EN1_PN5,       USB,         NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
++	PINCFG(HDMI_INT_PN7,           DEFAULT,     DOWN,   NORMAL,   INPUT,   DEFAULT, NORMAL),
++	PINCFG(ULPI_DATA7_PO0,         ULPI,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(ULPI_DATA0_PO1,         ULPI,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(ULPI_DATA1_PO2,         ULPI,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(ULPI_DATA2_PO3,         ULPI,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(ULPI_DATA3_PO4,         ULPI,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(ULPI_DATA4_PO5,         ULPI,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(ULPI_DATA5_PO6,         ULPI,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(ULPI_DATA6_PO7,         ULPI,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP3_FS_PP0,            I2S2,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP3_DIN_PP1,           I2S2,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP3_DOUT_PP2,          DEFAULT,     NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP3_SCLK_PP3,          RSVD3,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP4_FS_PP4,            RSVD4,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP4_DIN_PP5,           RSVD3,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP4_DOUT_PP6,          RSVD4,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP4_SCLK_PP7,          RSVD3,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_COL0_PQ0,            DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(KB_COL1_PQ1,            RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_COL2_PQ2,            DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(KB_COL3_PQ3,            DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(KB_COL4_PQ4,            SDMMC3,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(KB_COL5_PQ5,            RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_COL6_PQ6,            DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(KB_COL7_PQ7,            DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(KB_ROW0_PR0,            DEFAULT,     NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW1_PR1,            DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(KB_ROW2_PR2,            RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW3_PR3,            KBC,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW4_PR4,            DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(KB_ROW5_PR5,            RSVD3,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW6_PR6,            KBC,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW7_PR7,            DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(KB_ROW8_PS0,            RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW9_PS1,            UARTA,       DOWN,   NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW10_PS2,           UARTA,       NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(KB_ROW11_PS3,           DEFAULT,     NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW12_PS4,           DEFAULT,     NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW13_PS5,           RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW14_PS6,           RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW15_PS7,           DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(KB_ROW16_PT0,           RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(KB_ROW17_PT1,           DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(GEN2_I2C_SCL_PT5,       I2C2,        NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
++	PINCFG(GEN2_I2C_SDA_PT6,       I2C2,        NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
++	PINCFG(SDMMC4_CMD_PT7,         SDMMC4,      NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PU0,                    RSVD4,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PU1,                    RSVD1,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PU2,                    RSVD1,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PU3,                    GMI,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PU4,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PU5,                    DEFAULT,     UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PU6,                    DEFAULT,     UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PV0,                    DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PV1,                    RSVD1,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(SDMMC3_CD_N_PV2,        SDMMC3,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC1_WP_N_PV3,        SDMMC1,      DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DDC_SCL_PV4,            I2C4,        NORMAL, NORMAL,   INPUT,   DEFAULT, NORMAL),
++	PINCFG(DDC_SDA_PV5,            I2C4,        NORMAL, NORMAL,   INPUT,   DEFAULT, NORMAL),
++	PINCFG(GPIO_W2_AUD_PW2,        RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(GPIO_W3_AUD_PW3,        DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(DAP_MCLK1_PW4,          EXTPERIPH1,  NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(CLK2_OUT_PW5,           RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(UART3_TXD_PW6,          RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(UART3_RXD_PW7,          RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DVFS_PWM_PX0,           CLDVFS,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(GPIO_X1_AUD_PX1,        DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(DVFS_CLK_PX2,           CLDVFS,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(GPIO_X3_AUD_PX3,        RSVD4,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(GPIO_X4_AUD_PX4,        DEFAULT,     NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(GPIO_X5_AUD_PX5,        RSVD4,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(GPIO_X6_AUD_PX6,        GMI,         DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(GPIO_X7_AUD_PX7,        DEFAULT,     NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(ULPI_CLK_PY0,           SPI1,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(ULPI_DIR_PY1,           SPI1,        NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(ULPI_NXT_PY2,           SPI1,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(ULPI_STP_PY3,           SPI1,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(SDMMC1_DAT3_PY4,        SDMMC1,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC1_DAT2_PY5,        SDMMC1,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC1_DAT1_PY6,        SDMMC1,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC1_DAT0_PY7,        SDMMC1,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC1_CLK_PZ0,         SDMMC1,      NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC1_CMD_PZ1,         SDMMC1,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PWR_I2C_SCL_PZ6,        I2CPWR,      NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
++	PINCFG(PWR_I2C_SDA_PZ7,        I2CPWR,      NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
++	PINCFG(SDMMC4_DAT0_PAA0,       SDMMC4,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC4_DAT1_PAA1,       SDMMC4,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC4_DAT2_PAA2,       SDMMC4,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC4_DAT3_PAA3,       SDMMC4,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC4_DAT4_PAA4,       SDMMC4,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC4_DAT5_PAA5,       SDMMC4,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC4_DAT6_PAA6,       SDMMC4,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(SDMMC4_DAT7_PAA7,       SDMMC4,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(PBB0,                   VGP6,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(CAM_I2C_SCL_PBB1,       RSVD3,       DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
++	PINCFG(CAM_I2C_SDA_PBB2,       RSVD3,       DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
++	PINCFG(PBB3,                   VGP3,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PBB4,                   VGP4,        DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PBB5,                   RSVD3,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PBB6,                   RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PBB7,                   RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(CAM_MCLK_PCC0,          VI,          DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PCC1,                   RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PCC2,                   RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(SDMMC4_CLK_PCC4,        SDMMC4,      NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(CLK2_REQ_PCC5,          RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PEX_L0_RST_N_PDD1,      RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PEX_L0_CLKREQ_N_PDD2,   RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PEX_WAKE_N_PDD3,        RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PEX_L1_RST_N_PDD5,      RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PEX_L1_CLKREQ_N_PDD6,   RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(CLK3_OUT_PEE0,          RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(CLK3_REQ_PEE1,          RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(DAP_MCLK1_REQ_PEE2,     RSVD4,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(HDMI_CEC_PEE3,          CEC,         NORMAL, NORMAL,   INPUT,   ENABLE,  DEFAULT),
++	PINCFG(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3,      NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(SDMMC3_CLK_LB_IN_PEE5,  SDMMC3,      UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(DP_HPD_PFF0,            DP,          UP,     NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(USB_VBUS_EN2_PFF1,      RSVD2,       DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
++	PINCFG(PFF2,                   RSVD2,       DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
++	PINCFG(CORE_PWR_REQ,           PWRON,       NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(CPU_PWR_REQ,            CPU,         NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(PWR_INT_N,              PMI,         NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(RESET_OUT_N,            RESET_OUT_N, NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++	PINCFG(OWR,                    RSVD2,       DOWN,   TRISTATE, OUTPUT,  DEFAULT, NORMAL),
++	PINCFG(CLK_32K_IN,             CLK,         NORMAL, NORMAL,   INPUT,   DEFAULT, DEFAULT),
++	PINCFG(JTAG_RTCK,              RTCK,        NORMAL, NORMAL,   OUTPUT,  DEFAULT, DEFAULT),
++};
++
++#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
++	{						\
++		.drvgrp = PMUX_DRVGRP_##_drvgrp,	\
++		.slwf   = _slwf,			\
++		.slwr   = _slwr,			\
++		.drvup  = _drvup,			\
++		.drvdn  = _drvdn,			\
++		.lpmd   = PMUX_LPMD_##_lpmd,		\
++		.schmt  = PMUX_SCHMT_##_schmt,		\
++		.hsm    = PMUX_HSM_##_hsm,		\
++	}
++
++static const struct pmux_drvgrp_config nyan_big_drvgrps[] = {
++};
++
++#endif /* PINMUX_CONFIG_NYAN_BIG_H */
+diff -ruN u-boot-2015.01-rc3/board/nvidia/venice2/as3722_init.h u-boot/board/nvidia/venice2/as3722_init.h
+--- u-boot-2015.01-rc3/board/nvidia/venice2/as3722_init.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/nvidia/venice2/as3722_init.h	2015-01-01 17:34:32.453499973 +0100
+@@ -18,7 +18,7 @@
+ #define AS3722_LDO6VOLTAGE_REG	0x16	/* VDD_SDMMC */
+ #define AS3722_LDCONTROL_REG	0x4E
+ 
+-#ifdef CONFIG_TARGET_JETSON_TK1
++#if defined(CONFIG_TARGET_JETSON_TK1) || defined(CONFIG_TARGET_NYAN_BIG)
+ #define AS3722_SD0VOLTAGE_DATA	(0x3C00 | AS3722_SD0VOLTAGE_REG)
+ #else
+ #define AS3722_SD0VOLTAGE_DATA	(0x2800 | AS3722_SD0VOLTAGE_REG)
+diff -ruN u-boot-2015.01-rc3/board/nvidia/whistler/whistler.c u-boot/board/nvidia/whistler/whistler.c
+--- u-boot-2015.01-rc3/board/nvidia/whistler/whistler.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/nvidia/whistler/whistler.c	2015-01-01 17:34:32.453499973 +0100
+@@ -6,6 +6,7 @@
+  */
+ 
+ #include <common.h>
++#include <dm.h>
+ #include <asm/io.h>
+ #include <asm/arch/tegra.h>
+ #include <asm/arch/clock.h>
+@@ -21,23 +22,26 @@
+  */
+ void pin_mux_mmc(void)
+ {
++	struct udevice *dev;
+ 	uchar val;
+ 	int ret;
+ 
+ 	/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
+-	ret = i2c_set_bus_num(0);
+-	if (ret)
+-		printf("i2c_set_bus_num failed: %d\n", ret);
++	ret = i2c_get_chip_for_busnum(0, 0x3c, &dev);
++	if (ret) {
++		printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
++		return;
++	}
+ 	val = 0x29;
+-	ret = i2c_write(0x3c, 0x46, 1, &val, 1);
++	ret = i2c_write(dev, 0x46, &val, 1);
+ 	if (ret)
+ 		printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
+ 	val = 0x00;
+-	ret = i2c_write(0x3c, 0x45, 1, &val, 1);
++	ret = i2c_write(dev, 0x45, &val, 1);
+ 	if (ret)
+ 		printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
+ 	val = 0x1f;
+-	ret = i2c_write(0x3c, 0x44, 1, &val, 1);
++	ret = i2c_write(dev, 0x44, &val, 1);
+ 	if (ret)
+ 		printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
+ 
+@@ -49,6 +53,7 @@
+ /* this is a weak define that we are overriding */
+ void pin_mux_usb(void)
+ {
++	struct udevice *dev;
+ 	uchar val;
+ 	int ret;
+ 
+@@ -59,15 +64,17 @@
+ 	 */
+ 
+ 	/* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
+-	ret = i2c_set_bus_num(0);
+-	if (ret)
+-		printf("i2c_set_bus_num failed: %d\n", ret);
++	ret = i2c_get_chip_for_busnum(0, 0x20, &dev);
++	if (ret) {
++		printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
++		return;
++	}
+ 	val = 0x03;
+-	ret = i2c_write(0x20, 2, 1, &val, 1);
++	ret = i2c_write(dev, 2, &val, 1);
+ 	if (ret)
+ 		printf("i2c_write 0 0x20 2 failed: %d\n", ret);
+ 	val = 0xfc;
+-	ret = i2c_write(0x20, 6, 1, &val, 1);
++	ret = i2c_write(dev, 6, &val, 1);
+ 	if (ret)
+ 		printf("i2c_write 0 0x20 6 failed: %d\n", ret);
+ }
+diff -ruN u-boot-2015.01-rc3/board/raspberrypi/rpi/rpi.c u-boot/board/raspberrypi/rpi/rpi.c
+--- u-boot-2015.01-rc3/board/raspberrypi/rpi/rpi.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/raspberrypi/rpi/rpi.c	2015-01-01 17:34:32.469499711 +0100
+@@ -24,6 +24,7 @@
+ #include <asm/arch/mbox.h>
+ #include <asm/arch/sdhci.h>
+ #include <asm/global_data.h>
++#include <dm/platform_data/serial_pl01x.h>
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+@@ -36,6 +37,17 @@
+ 	.platdata = &gpio_platdata,
+ };
+ 
++static const struct pl01x_serial_platdata serial_platdata = {
++	.base = 0x20201000,
++	.type = TYPE_PL011,
++	.clock = 3000000,
++};
++
++U_BOOT_DEVICE(bcm2835_serials) = {
++	.name = "serial_pl01x",
++	.platdata = &serial_platdata,
++};
++
+ struct msg_get_arm_mem {
+ 	struct bcm2835_mbox_hdr hdr;
+ 	struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
+@@ -70,58 +82,82 @@
+ static const struct {
+ 	const char *name;
+ 	const char *fdtfile;
++	bool has_onboard_eth;
+ } models[] = {
++	[0] = {
++		"Unknown model",
++		"bcm2835-rpi-other.dtb",
++		false,
++	},
+ 	[BCM2835_BOARD_REV_B_I2C0_2] = {
+ 		"Model B (no P5)",
+ 		"bcm2835-rpi-b-i2c0.dtb",
++		true,
+ 	},
+ 	[BCM2835_BOARD_REV_B_I2C0_3] = {
+ 		"Model B (no P5)",
+ 		"bcm2835-rpi-b-i2c0.dtb",
++		true,
+ 	},
+ 	[BCM2835_BOARD_REV_B_I2C1_4] = {
+ 		"Model B",
+ 		"bcm2835-rpi-b.dtb",
++		true,
+ 	},
+ 	[BCM2835_BOARD_REV_B_I2C1_5] = {
+ 		"Model B",
+ 		"bcm2835-rpi-b.dtb",
++		true,
+ 	},
+ 	[BCM2835_BOARD_REV_B_I2C1_6] = {
+ 		"Model B",
+ 		"bcm2835-rpi-b.dtb",
++		true,
+ 	},
+ 	[BCM2835_BOARD_REV_A_7] = {
+ 		"Model A",
+ 		"bcm2835-rpi-a.dtb",
++		false,
+ 	},
+ 	[BCM2835_BOARD_REV_A_8] = {
+ 		"Model A",
+ 		"bcm2835-rpi-a.dtb",
++		false,
+ 	},
+ 	[BCM2835_BOARD_REV_A_9] = {
+ 		"Model A",
+ 		"bcm2835-rpi-a.dtb",
++		false,
+ 	},
+ 	[BCM2835_BOARD_REV_B_REV2_d] = {
+ 		"Model B rev2",
+ 		"bcm2835-rpi-b-rev2.dtb",
++		true,
+ 	},
+ 	[BCM2835_BOARD_REV_B_REV2_e] = {
+ 		"Model B rev2",
+ 		"bcm2835-rpi-b-rev2.dtb",
++		true,
+ 	},
+ 	[BCM2835_BOARD_REV_B_REV2_f] = {
+ 		"Model B rev2",
+ 		"bcm2835-rpi-b-rev2.dtb",
++		true,
+ 	},
+ 	[BCM2835_BOARD_REV_B_PLUS] = {
+ 		"Model B+",
+ 		"bcm2835-rpi-b-plus.dtb",
++		true,
+ 	},
+ 	[BCM2835_BOARD_REV_CM] = {
+ 		"Compute Module",
+ 		"bcm2835-rpi-cm.dtb",
++		false,
++	},
++	[BCM2835_BOARD_REV_A_PLUS] = {
++		"Model A+",
++		"bcm2835-rpi-a-plus.dtb",
++		false,
+ 	},
+ };
+ 
+@@ -154,9 +190,6 @@
+ 		return;
+ 
+ 	fdtfile = models[rpi_board_rev].fdtfile;
+-	if (!fdtfile)
+-		fdtfile = "bcm2835-rpi-other.dtb";
+-
+ 	setenv("fdtfile", fdtfile);
+ }
+ 
+@@ -165,6 +198,9 @@
+ 	ALLOC_ALIGN_BUFFER(struct msg_get_mac_address, msg, 1, 16);
+ 	int ret;
+ 
++	if (!models[rpi_board_rev].has_onboard_eth)
++		return;
++
+ 	if (getenv("usbethaddr"))
+ 		return;
+ 
+@@ -231,12 +267,17 @@
+ 	}
+ 
+ 	rpi_board_rev = msg->get_board_rev.body.resp.rev;
+-	if (rpi_board_rev >= ARRAY_SIZE(models))
++	if (rpi_board_rev >= ARRAY_SIZE(models)) {
++		printf("RPI: Board rev %u outside known range\n",
++		       rpi_board_rev);
+ 		rpi_board_rev = 0;
++	}
++	if (!models[rpi_board_rev].name) {
++		printf("RPI: Board rev %u unknown\n", rpi_board_rev);
++		rpi_board_rev = 0;
++	}
+ 
+ 	name = models[rpi_board_rev].name;
+-	if (!name)
+-		name = "Unknown model";
+ 	printf("RPI model: %s\n", name);
+ }
+ 
+diff -ruN u-boot-2015.01-rc3/board/renesas/alt/alt.c u-boot/board/renesas/alt/alt.c
+--- u-boot-2015.01-rc3/board/renesas/alt/alt.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/renesas/alt/alt.c	2015-01-01 17:34:32.473499645 +0100
+@@ -15,6 +15,8 @@
+ #include <asm/arch/sys_proto.h>
+ #include <asm/gpio.h>
+ #include <asm/arch/rmobile.h>
++#include <asm/arch/rcar-mstp.h>
++#include <asm/arch/mmc.h>
+ #include <netdev.h>
+ #include <miiphy.h>
+ #include <i2c.h>
+@@ -37,30 +39,11 @@
+ 	qos_init();
+ }
+ 
+-#define MSTPSR1		0xE6150038
+-#define SMSTPCR1	0xE6150134
+ #define TMU0_MSTP125	(1 << 25)
+-
+-#define MSTPSR7		0xE61501C4
+-#define SMSTPCR7	0xE615014C
+ #define SCIF2_MSTP719	(1 << 19)
+-
+-#define MSTPSR8		0xE61509A0
+-#define SMSTPCR8	0xE6150990
+ #define ETHER_MSTP813	(1 << 13)
+-
+-#define MSTPSR3		0xE6150048
+-#define SMSTPCR3	0xE615013C
+ #define IIC1_MSTP323	(1 << 23)
+-
+-#define mstp_setbits(type, addr, saddr, set) \
+-	out_##type((saddr), in_##type(addr) | (set))
+-#define mstp_clrbits(type, addr, saddr, clear) \
+-	out_##type((saddr), in_##type(addr) & ~(clear))
+-#define mstp_setbits_le32(addr, saddr, set) \
+-	mstp_setbits(le32, addr, saddr, set)
+-#define mstp_clrbits_le32(addr, saddr, clear)   \
+-	mstp_clrbits(le32, addr, saddr, clear)
++#define MMC0_MSTP315	(1 << 15)
+ 
+ int board_early_init_f(void)
+ {
+@@ -76,15 +59,13 @@
+ 	/* IIC1 / sh-i2c ch1 */
+ 	mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
+ 
++#ifdef CONFIG_SH_MMCIF
++	/* MMC */
++	mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
++#endif
+ 	return 0;
+ }
+ 
+-void arch_preboot_os(void)
+-{
+-	/* Disable TMU0 */
+-	mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+-}
+-
+ int board_init(void)
+ {
+ 	/* adress of boot parameters */
+@@ -145,6 +126,19 @@
+ #endif
+ }
+ 
++int board_mmc_init(bd_t *bis)
++{
++	int ret = 0;
++
++#ifdef CONFIG_SH_MMCIF
++	gpio_request(GPIO_GP_4_31, NULL);
++	gpio_set_value(GPIO_GP_4_31, 1);
++
++	ret = mmcif_mmc_init();
++#endif
++	return ret;
++}
++
+ int dram_init(void)
+ {
+ 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+diff -ruN u-boot-2015.01-rc3/board/renesas/alt/Makefile u-boot/board/renesas/alt/Makefile
+--- u-boot-2015.01-rc3/board/renesas/alt/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/renesas/alt/Makefile	2015-01-01 17:34:32.473499645 +0100
+@@ -6,4 +6,4 @@
+ # SPDX-License-Identifier: GPL-2.0
+ #
+ 
+-obj-y	:= alt.o qos.o
++obj-y	:= alt.o qos.o ../rcar-gen2-common/common.o
+diff -ruN u-boot-2015.01-rc3/board/renesas/gose/gose.c u-boot/board/renesas/gose/gose.c
+--- u-boot-2015.01-rc3/board/renesas/gose/gose.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/renesas/gose/gose.c	2015-01-01 17:34:32.473499645 +0100
+@@ -15,6 +15,7 @@
+ #include <asm/arch/sys_proto.h>
+ #include <asm/gpio.h>
+ #include <asm/arch/rmobile.h>
++#include <asm/arch/rcar-mstp.h>
+ #include <netdev.h>
+ #include <miiphy.h>
+ #include <i2c.h>
+@@ -41,27 +42,10 @@
+ 	qos_init();
+ }
+ 
+-#define MSTPSR1		0xE6150038
+-#define SMSTPCR1	0xE6150134
+ #define TMU0_MSTP125	(1 << 25)
+-
+-#define MSTPSR7		0xE61501C4
+-#define SMSTPCR7	0xE615014C
+ #define SCIF0_MSTP721	(1 << 21)
+-
+-#define MSTPSR8		0xE61509A0
+-#define SMSTPCR8	0xE6150990
+ #define ETHER_MSTP813	(1 << 13)
+ 
+-#define mstp_setbits(type, addr, saddr, set) \
+-	out_##type((saddr), in_##type(addr) | (set))
+-#define mstp_clrbits(type, addr, saddr, clear) \
+-	out_##type((saddr), in_##type(addr) & ~(clear))
+-#define mstp_setbits_le32(addr, saddr, set) \
+-	mstp_setbits(le32, addr, saddr, set)
+-#define mstp_clrbits_le32(addr, saddr, clear) \
+-	mstp_clrbits(le32, addr, saddr, clear)
+-
+ int board_early_init_f(void)
+ {
+ 	/* TMU0 */
+@@ -76,16 +60,6 @@
+ 	return 0;
+ }
+ 
+-#define TSTR0		0x04
+-#define TSTR0_STR0	0x01
+-void arch_preboot_os(void)
+-{
+-	/* stop TMU0 */
+-	mstp_clrbits_le32(TMU_BASE + TSTR0, TMU_BASE + TSTR0, TSTR0_STR0);
+-	/* Disable TMU0 */
+-	mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+-}
+-
+ #define PUPR5		0xE6060114
+ #define PUPR5_ETH	0x3FFC0000
+ #define PUPR5_ETH_MAGIC	(1 << 27)
+diff -ruN u-boot-2015.01-rc3/board/renesas/gose/Makefile u-boot/board/renesas/gose/Makefile
+--- u-boot-2015.01-rc3/board/renesas/gose/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/renesas/gose/Makefile	2015-01-01 17:34:32.473499645 +0100
+@@ -6,4 +6,4 @@
+ # SPDX-License-Identifier: GPL-2.0
+ #
+ 
+-obj-y	:= gose.o qos.o
++obj-y	:= gose.o qos.o ../rcar-gen2-common/common.o
+diff -ruN u-boot-2015.01-rc3/board/renesas/koelsch/koelsch.c u-boot/board/renesas/koelsch/koelsch.c
+--- u-boot-2015.01-rc3/board/renesas/koelsch/koelsch.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/renesas/koelsch/koelsch.c	2015-01-01 17:34:32.473499645 +0100
+@@ -16,6 +16,7 @@
+ #include <asm/arch/sys_proto.h>
+ #include <asm/gpio.h>
+ #include <asm/arch/rmobile.h>
++#include <asm/arch/rcar-mstp.h>
+ #include <netdev.h>
+ #include <miiphy.h>
+ #include <i2c.h>
+@@ -43,27 +44,10 @@
+ 	qos_init();
+ }
+ 
+-#define MSTPSR1		0xE6150038
+-#define SMSTPCR1	0xE6150134
+ #define TMU0_MSTP125	(1 << 25)
+-
+-#define MSTPSR7		0xE61501C4
+-#define SMSTPCR7	0xE615014C
+ #define SCIF0_MSTP721	(1 << 21)
+-
+-#define MSTPSR8		0xE61509A0
+-#define SMSTPCR8	0xE6150990
+ #define ETHER_MSTP813	(1 << 13)
+ 
+-#define mstp_setbits(type, addr, saddr, set) \
+-	out_##type((saddr), in_##type(addr) | (set))
+-#define mstp_clrbits(type, addr, saddr, clear) \
+-	out_##type((saddr), in_##type(addr) & ~(clear))
+-#define mstp_setbits_le32(addr, saddr, set) \
+-	mstp_setbits(le32, addr, saddr, set)
+-#define mstp_clrbits_le32(addr, saddr, clear)   \
+-	mstp_clrbits(le32, addr, saddr, clear)
+-
+ int board_early_init_f(void)
+ {
+ 	mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+@@ -77,12 +61,6 @@
+ 	return 0;
+ }
+ 
+-void arch_preboot_os(void)
+-{
+-	/* Disable TMU0 */
+-	mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+-}
+-
+ /* LSI pin pull-up control */
+ #define PUPR5 0xe6060114
+ #define PUPR5_ETH 0x3FFC0000
+diff -ruN u-boot-2015.01-rc3/board/renesas/koelsch/Makefile u-boot/board/renesas/koelsch/Makefile
+--- u-boot-2015.01-rc3/board/renesas/koelsch/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/renesas/koelsch/Makefile	2015-01-01 17:34:32.473499645 +0100
+@@ -6,4 +6,4 @@
+ # SPDX-License-Identifier: GPL-2.0
+ #
+ 
+-obj-y	:= koelsch.o qos.o
++obj-y	:= koelsch.o qos.o ../rcar-gen2-common/common.o
+diff -ruN u-boot-2015.01-rc3/board/renesas/lager/lager.c u-boot/board/renesas/lager/lager.c
+--- u-boot-2015.01-rc3/board/renesas/lager/lager.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/renesas/lager/lager.c	2015-01-01 17:34:32.473499645 +0100
+@@ -18,8 +18,11 @@
+ #include <asm/arch/sys_proto.h>
+ #include <asm/gpio.h>
+ #include <asm/arch/rmobile.h>
++#include <asm/arch/rcar-mstp.h>
++#include <asm/arch/mmc.h>
+ #include <miiphy.h>
+ #include <i2c.h>
++#include <mmc.h>
+ #include "qos.h"
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+@@ -50,26 +53,10 @@
+ 	qos_init();
+ }
+ 
+-#define MSTPSR1	0xE6150038
+-#define SMSTPCR1	0xE6150134
+ #define TMU0_MSTP125	(1 << 25)
+-
+-#define MSTPSR7	0xE61501C4
+-#define SMSTPCR7	0xE615014C
+ #define SCIF0_MSTP721	(1 << 21)
+-
+-#define MSTPSR8	0xE61509A0
+-#define SMSTPCR8	0xE6150990
+ #define ETHER_MSTP813	(1 << 13)
+-
+-#define mstp_setbits(type, addr, saddr, set) \
+-	out_##type((saddr), in_##type(addr) | (set))
+-#define mstp_clrbits(type, addr, saddr, clear) \
+-	out_##type((saddr), in_##type(addr) & ~(clear))
+-#define mstp_setbits_le32(addr, saddr, set)	\
+-		mstp_setbits(le32, addr, saddr, set)
+-#define mstp_clrbits_le32(addr, saddr, clear)	\
+-		mstp_clrbits(le32, addr, saddr, clear)
++#define MMC1_MSTP305    (1 << 5)
+ 
+ int board_early_init_f(void)
+ {
+@@ -79,16 +66,12 @@
+ 	mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
+ 	/* ETHER */
+ 	mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
++	/* eMMC */
++	mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC1_MSTP305);
+ 
+ 	return 0;
+ }
+ 
+-void arch_preboot_os(void)
+-{
+-	/* Disable TMU0 */
+-	mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+-}
+-
+ DECLARE_GLOBAL_DATA_PTR;
+ int board_init(void)
+ {
+@@ -163,6 +146,28 @@
+ 	return 0;
+ }
+ 
++int board_mmc_init(bd_t *bis)
++{
++	int ret = 0;
++
++#ifdef CONFIG_SH_MMCIF
++	gpio_request(GPIO_FN_MMC1_D0, NULL);
++	gpio_request(GPIO_FN_MMC1_D1, NULL);
++	gpio_request(GPIO_FN_MMC1_D2, NULL);
++	gpio_request(GPIO_FN_MMC1_D3, NULL);
++	gpio_request(GPIO_FN_MMC1_D4, NULL);
++	gpio_request(GPIO_FN_MMC1_D5, NULL);
++	gpio_request(GPIO_FN_MMC1_D6, NULL);
++	gpio_request(GPIO_FN_MMC1_D7, NULL);
++	gpio_request(GPIO_FN_MMC1_CLK, NULL);
++	gpio_request(GPIO_FN_MMC1_CMD, NULL);
++
++	ret = mmcif_mmc_init();
++#endif
++	return ret;
++}
++
++
+ int dram_init(void)
+ {
+ 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+diff -ruN u-boot-2015.01-rc3/board/renesas/lager/Makefile u-boot/board/renesas/lager/Makefile
+--- u-boot-2015.01-rc3/board/renesas/lager/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/renesas/lager/Makefile	2015-01-01 17:34:32.473499645 +0100
+@@ -6,4 +6,4 @@
+ # SPDX-License-Identifier: GPL-2.0
+ #
+ 
+-obj-y	:= lager.o qos.o
++obj-y	:= lager.o qos.o ../rcar-gen2-common/common.o
+diff -ruN u-boot-2015.01-rc3/board/renesas/rcar-gen2-common/common.c u-boot/board/renesas/rcar-gen2-common/common.c
+--- u-boot-2015.01-rc3/board/renesas/rcar-gen2-common/common.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/renesas/rcar-gen2-common/common.c	2015-01-01 17:34:32.477499579 +0100
+@@ -0,0 +1,59 @@
++/*
++ * board/renesas/rcar-gen2-common/common.c
++ *
++ * Copyright (C) 2013 Renesas Electronics Corporation
++ * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
++ *
++ * SPDX-License-Identifier: GPL-2.0
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/arch/rmobile.h>
++#include <asm/arch/rcar-mstp.h>
++
++#define TSTR0		0x04
++#define TSTR0_STR0	0x01
++
++static struct mstp_ctl mstptbl[] = {
++	{ SMSTPCR0, MSTP0_BITS, CONFIG_SMSTP0_ENA,
++		RMSTPCR0, MSTP0_BITS, CONFIG_RMSTP0_ENA },
++	{ SMSTPCR1, MSTP1_BITS, CONFIG_SMSTP1_ENA,
++		RMSTPCR1, MSTP1_BITS, CONFIG_RMSTP1_ENA },
++	{ SMSTPCR2, MSTP2_BITS, CONFIG_SMSTP2_ENA,
++		RMSTPCR2, MSTP2_BITS, CONFIG_RMSTP2_ENA },
++	{ SMSTPCR3, MSTP3_BITS, CONFIG_SMSTP3_ENA,
++		RMSTPCR3, MSTP3_BITS, CONFIG_RMSTP3_ENA },
++	{ SMSTPCR4, MSTP4_BITS, CONFIG_SMSTP4_ENA,
++		RMSTPCR4, MSTP4_BITS, CONFIG_RMSTP4_ENA },
++	{ SMSTPCR5, MSTP5_BITS, CONFIG_SMSTP5_ENA,
++		RMSTPCR5, MSTP5_BITS, CONFIG_RMSTP5_ENA },
++	/* No MSTP6 */
++	{ SMSTPCR7, MSTP7_BITS, CONFIG_SMSTP7_ENA,
++		RMSTPCR7, MSTP7_BITS, CONFIG_RMSTP7_ENA },
++	{ SMSTPCR8, MSTP8_BITS, CONFIG_SMSTP8_ENA,
++		RMSTPCR8, MSTP8_BITS, CONFIG_RMSTP8_ENA },
++	{ SMSTPCR9, MSTP9_BITS, CONFIG_SMSTP9_ENA,
++		RMSTPCR9, MSTP9_BITS, CONFIG_RMSTP9_ENA },
++	{ SMSTPCR10, MSTP10_BITS, CONFIG_SMSTP10_ENA,
++		 RMSTPCR10, MSTP10_BITS, CONFIG_RMSTP10_ENA },
++	{ SMSTPCR11, MSTP11_BITS, CONFIG_SMSTP1_ENA,
++		 RMSTPCR11, MSTP11_BITS, CONFIG_RMSTP11_ENA },
++};
++
++void arch_preboot_os(void)
++{
++	int i;
++
++	/* stop TMU0 */
++	mstp_clrbits_le32(TMU_BASE + TSTR0, TMU_BASE + TSTR0, TSTR0_STR0);
++
++	/* Stop module clock */
++	for (i = 0; i < ARRAY_SIZE(mstptbl); i++) {
++		mstp_setclrbits_le32(mstptbl[i].s_addr, mstptbl[i].s_dis,
++				     mstptbl[i].s_ena);
++		mstp_setclrbits_le32(mstptbl[i].r_addr, mstptbl[i].r_dis,
++				     mstptbl[i].r_ena);
++	}
++}
+diff -ruN u-boot-2015.01-rc3/board/solidrun/hummingboard/hummingboard.c u-boot/board/solidrun/hummingboard/hummingboard.c
+--- u-boot-2015.01-rc3/board/solidrun/hummingboard/hummingboard.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/solidrun/hummingboard/hummingboard.c	2015-01-01 17:34:32.497499251 +0100
+@@ -146,7 +146,7 @@
+ {
+ 	struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ 
+-	int ret = enable_fec_anatop_clock(ENET_25MHz);
++	int ret = enable_fec_anatop_clock(ENET_25MHZ);
+ 	if (ret)
+ 		return ret;
+ 
+diff -ruN u-boot-2015.01-rc3/board/st/stv0991/Kconfig u-boot/board/st/stv0991/Kconfig
+--- u-boot-2015.01-rc3/board/st/stv0991/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/st/stv0991/Kconfig	2015-01-01 17:34:32.501499185 +0100
+@@ -0,0 +1,23 @@
++if TARGET_STV0991
++
++config SYS_CPU
++	string
++	default "armv7"
++
++config SYS_BOARD
++	string
++	default "stv0991"
++
++config SYS_VENDOR
++	string
++	default "st"
++
++config SYS_SOC
++	string
++	default "stv0991"
++
++config SYS_CONFIG_NAME
++	string
++	default "stv0991"
++
++endif
+diff -ruN u-boot-2015.01-rc3/board/st/stv0991/MAINTAINERS u-boot/board/st/stv0991/MAINTAINERS
+--- u-boot-2015.01-rc3/board/st/stv0991/MAINTAINERS	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/st/stv0991/MAINTAINERS	2015-01-01 17:34:32.501499185 +0100
+@@ -0,0 +1,5 @@
++STV0991 APPLICATION BOARD
++M:	Vikas Manocha <vikas.manocha@st.com>
++S:	Maintained
++F:	board/st/stv0991/
++F:	include/configs/stv0991.h
+diff -ruN u-boot-2015.01-rc3/board/st/stv0991/Makefile u-boot/board/st/stv0991/Makefile
+--- u-boot-2015.01-rc3/board/st/stv0991/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/st/stv0991/Makefile	2015-01-01 17:34:32.501499185 +0100
+@@ -0,0 +1,8 @@
++#
++# (C) Copyright 2014
++# Vikas Manocha, ST Microelectronics, vikas.manocha@stcom
++#
++# SPDX-License-Identifier:	GPL-2.0+
++#
++
++obj-y	:= stv0991.o
+diff -ruN u-boot-2015.01-rc3/board/st/stv0991/stv0991.c u-boot/board/st/stv0991/stv0991.c
+--- u-boot-2015.01-rc3/board/st/stv0991/stv0991.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/board/st/stv0991/stv0991.c	2015-01-01 17:34:32.501499185 +0100
+@@ -0,0 +1,104 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <miiphy.h>
++#include <asm/arch/stv0991_periph.h>
++#include <asm/arch/stv0991_defs.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/gpio.h>
++#include <netdev.h>
++#include <asm/io.h>
++#include <dm/platdata.h>
++#include <dm/platform_data/serial_pl01x.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++struct gpio_regs *const gpioa_regs =
++		(struct gpio_regs *) GPIOA_BASE_ADDR;
++
++static const struct pl01x_serial_platdata serial_platdata = {
++	.base = 0x80406000,
++	.type = TYPE_PL011,
++	.clock = 2700 * 1000,
++};
++
++U_BOOT_DEVICE(stv09911_serials) = {
++	.name = "serial_pl01x",
++	.platdata = &serial_platdata,
++};
++
++#ifdef CONFIG_SHOW_BOOT_PROGRESS
++void show_boot_progress(int progress)
++{
++	printf("%i\n", progress);
++}
++#endif
++
++void enable_eth_phy(void)
++{
++	/* Set GPIOA_06 pad HIGH (Appli board)*/
++	writel(readl(&gpioa_regs->dir) | 0x40, &gpioa_regs->dir);
++	writel(readl(&gpioa_regs->data) | 0x40, &gpioa_regs->data);
++}
++int board_eth_enable(void)
++{
++	stv0991_pinmux_config(ETH_GPIOB_10_31_C_0_4);
++	clock_setup(ETH_CLOCK_CFG);
++	enable_eth_phy();
++	return 0;
++}
++
++/*
++ * Miscellaneous platform dependent initialisations
++ */
++int board_init(void)
++{
++	board_eth_enable();
++	return 0;
++}
++
++int board_uart_init(void)
++{
++	stv0991_pinmux_config(UART_GPIOC_30_31);
++	clock_setup(UART_CLOCK_CFG);
++	return 0;
++}
++
++#ifdef CONFIG_BOARD_EARLY_INIT_F
++int board_early_init_f(void)
++{
++	board_uart_init();
++	return 0;
++}
++#endif
++
++int dram_init(void)
++{
++	gd->ram_size = PHYS_SDRAM_1_SIZE;
++	return 0;
++}
++
++void dram_init_banksize(void)
++{
++	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
++	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
++}
++
++#ifdef CONFIG_CMD_NET
++int board_eth_init(bd_t *bis)
++{
++	int ret = 0;
++
++#if defined(CONFIG_DESIGNWARE_ETH)
++	u32 interface = PHY_INTERFACE_MODE_MII;
++	if (designware_initialize(GMAC_BASE_ADDR, interface) >= 0)
++		ret++;
++#endif
++	return ret;
++}
++#endif
+diff -ruN u-boot-2015.01-rc3/board/tbs/tbs2910/Kconfig u-boot/board/tbs/tbs2910/Kconfig
+--- u-boot-2015.01-rc3/board/tbs/tbs2910/Kconfig	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/tbs/tbs2910/Kconfig	2015-01-01 17:34:32.505499121 +0100
+@@ -1,23 +1,15 @@
+ if TARGET_TBS2910
+ 
+-config SYS_CPU
+-	string
+-	default "armv7"
+-
+ config SYS_BOARD
+-	string
+ 	default "tbs2910"
+ 
+ config SYS_VENDOR
+-	string
+ 	default "tbs"
+ 
+ config SYS_SOC
+-	string
+ 	default "mx6"
+ 
+ config SYS_CONFIG_NAME
+-	string
+ 	default "tbs2910"
+ 
+ endif
+diff -ruN u-boot-2015.01-rc3/board/toradex/apalis_t30/apalis_t30.c u-boot/board/toradex/apalis_t30/apalis_t30.c
+--- u-boot-2015.01-rc3/board/toradex/apalis_t30/apalis_t30.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/board/toradex/apalis_t30/apalis_t30.c	2015-01-01 17:34:32.509499055 +0100
+@@ -6,7 +6,7 @@
+  */
+ 
+ #include <common.h>
+-
++#include <dm.h>
+ #include <asm/arch/gp_padctrl.h>
+ #include <asm/arch/pinmux.h>
+ #include <asm/gpio.h>
+@@ -38,23 +38,20 @@
+ #ifdef CONFIG_PCI_TEGRA
+ int tegra_pcie_board_init(void)
+ {
+-	unsigned int old_bus;
++	struct udevice *dev;
+ 	u8 addr, data[1];
+ 	int err;
+ 
+-	old_bus = i2c_get_bus_num();
+-
+-	err = i2c_set_bus_num(0);
++	err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+ 	if (err) {
+-		debug("failed to set I2C bus\n");
++		debug("%s: Cannot find PMIC I2C chip\n", __func__);
+ 		return err;
+ 	}
+-
+ 	/* TPS659110: VDD2_OP_REG = 1.05V */
+ 	data[0] = 0x27;
+ 	addr = 0x25;
+ 
+-	err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
++	err = i2c_write(dev, addr, data, 1);
+ 	if (err) {
+ 		debug("failed to set VDD supply\n");
+ 		return err;
+@@ -64,7 +61,7 @@
+ 	data[0] = 0x0D;
+ 	addr = 0x24;
+ 
+-	err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
++	err = i2c_write(dev, addr, data, 1);
+ 	if (err) {
+ 		debug("failed to enable VDD supply\n");
+ 		return err;
+@@ -74,14 +71,12 @@
+ 	data[0] = 0x0D;
+ 	addr = 0x35;
+ 
+-	err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
++	err = i2c_write(dev, addr, data, 1);
+ 	if (err) {
+ 		debug("failed to set AVDD supply\n");
+ 		return err;
+ 	}
+ 
+-	i2c_set_bus_num(old_bus);
+-
+ 	return 0;
+ }
+ 
+diff -ruN u-boot-2015.01-rc3/common/board_f.c u-boot/common/board_f.c
+--- u-boot-2015.01-rc3/common/board_f.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/common/board_f.c	2015-01-01 17:34:32.521498858 +0100
+@@ -813,7 +813,9 @@
+ #endif
+ 	setup_mon_len,
+ 	setup_fdt,
++#ifdef CONFIG_TRACE
+ 	trace_early_init,
++#endif
+ 	initf_malloc,
+ #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ 	/* TODO: can this go into arch_cpu_init()? */
+diff -ruN u-boot-2015.01-rc3/common/cmd_dfu.c u-boot/common/cmd_dfu.c
+--- u-boot-2015.01-rc3/common/cmd_dfu.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/common/cmd_dfu.c	2015-01-01 17:34:32.525498793 +0100
+@@ -38,10 +38,10 @@
+ 
+ 	int controller_index = simple_strtoul(usb_controller, NULL, 0);
+ 	board_usb_init(controller_index, USB_INIT_DEVICE);
+-	dfu_clear_detach();
++	g_dnl_clear_detach();
+ 	g_dnl_register("usb_dnl_dfu");
+ 	while (1) {
+-		if (dfu_detach()) {
++		if (g_dnl_detach()) {
+ 			/*
+ 			 * Check if USB bus reset is performed after detach,
+ 			 * which indicates that -R switch has been passed to
+@@ -74,7 +74,7 @@
+ 	if (dfu_reset)
+ 		run_command("reset", 0);
+ 
+-	dfu_clear_detach();
++	g_dnl_clear_detach();
+ 
+ 	return ret;
+ }
+diff -ruN u-boot-2015.01-rc3/common/cmd_fastboot.c u-boot/common/cmd_fastboot.c
+--- u-boot-2015.01-rc3/common/cmd_fastboot.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/common/cmd_fastboot.c	2015-01-01 17:34:32.525498793 +0100
+@@ -15,17 +15,21 @@
+ {
+ 	int ret;
+ 
++	g_dnl_clear_detach();
+ 	ret = g_dnl_register("usb_dnl_fastboot");
+ 	if (ret)
+ 		return ret;
+ 
+ 	while (1) {
++		if (g_dnl_detach())
++			break;
+ 		if (ctrlc())
+ 			break;
+ 		usb_gadget_handle_interrupts();
+ 	}
+ 
+ 	g_dnl_unregister();
++	g_dnl_clear_detach();
+ 	return CMD_RET_SUCCESS;
+ }
+ 
+diff -ruN u-boot-2015.01-rc3/common/cmd_hash.c u-boot/common/cmd_hash.c
+--- u-boot-2015.01-rc3/common/cmd_hash.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/common/cmd_hash.c	2015-01-01 17:34:32.529498727 +0100
+@@ -18,9 +18,9 @@
+ static int do_hash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+ {
+ 	char *s;
+-#ifdef CONFIG_HASH_VERIFY
+ 	int flags = HASH_FLAG_ENV;
+ 
++#ifdef CONFIG_HASH_VERIFY
+ 	if (argc < 4)
+ 		return CMD_RET_USAGE;
+ 	if (!strcmp(argv[1], "-v")) {
+@@ -28,8 +28,6 @@
+ 		argc--;
+ 		argv++;
+ 	}
+-#else
+-	const int flags = HASH_FLAG_ENV;
+ #endif
+ 	/* Move forward to 'algorithm' parameter */
+ 	argc--;
+@@ -40,19 +38,19 @@
+ }
+ 
+ #ifdef CONFIG_HASH_VERIFY
+-U_BOOT_CMD(
+-	hash,	6,	1,	do_hash,
+-	"compute hash message digest",
+-	"algorithm address count [[*]sum_dest]\n"
+-		"    - compute message digest [save to env var / *address]\n"
+-	"hash -v algorithm address count [*]sum\n"
+-		"    - verify hash of memory area with env var / *address"
+-);
++#define HARGS 6
+ #else
++#define HARGS 5
++#endif
++
+ U_BOOT_CMD(
+-	hash,	5,	1,	do_hash,
+-	"compute message digest",
+-	"algorithm address count [[*]sum_dest]\n"
++	hash,	HARGS,	1,	do_hash,
++	"compute hash message digest",
++	"algorithm address count [[*]hash_dest]\n"
+ 		"    - compute message digest [save to env var / *address]"
+-);
++#ifdef CONFIG_HASH_VERIFY
++	"\nhash -v algorithm address count [*]hash\n"
++		"    - verify message digest of memory area to immediate value, \n"
++		"      env var or *address"
+ #endif
++);
+diff -ruN u-boot-2015.01-rc3/common/cmd_i2c.c u-boot/common/cmd_i2c.c
+--- u-boot-2015.01-rc3/common/cmd_i2c.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/common/cmd_i2c.c	2015-01-01 17:34:32.529498727 +0100
+@@ -69,8 +69,10 @@
+ #include <bootretry.h>
+ #include <cli.h>
+ #include <command.h>
++#include <dm.h>
+ #include <edid.h>
+ #include <environment.h>
++#include <errno.h>
+ #include <i2c.h>
+ #include <malloc.h>
+ #include <asm/byteorder.h>
+@@ -117,6 +119,60 @@
+ 
+ #define DISP_LINE_LEN	16
+ 
++/*
++ * Default for driver model is to use the chip's existing address length.
++ * For legacy code, this is not stored, so we need to use a suitable
++ * default.
++ */
++#ifdef CONFIG_DM_I2C
++#define DEFAULT_ADDR_LEN	(-1)
++#else
++#define DEFAULT_ADDR_LEN	1
++#endif
++
++#ifdef CONFIG_DM_I2C
++static struct udevice *i2c_cur_bus;
++
++static int i2c_set_bus_num(unsigned int busnum)
++{
++	struct udevice *bus;
++	int ret;
++
++	ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus);
++	if (ret) {
++		debug("%s: No bus %d\n", __func__, busnum);
++		return ret;
++	}
++	i2c_cur_bus = bus;
++
++	return 0;
++}
++
++static int i2c_get_cur_bus(struct udevice **busp)
++{
++	if (!i2c_cur_bus) {
++		puts("No I2C bus selected\n");
++		return -ENODEV;
++	}
++	*busp = i2c_cur_bus;
++
++	return 0;
++}
++
++static int i2c_get_cur_bus_chip(uint chip_addr, struct udevice **devp)
++{
++	struct udevice *bus;
++	int ret;
++
++	ret = i2c_get_cur_bus(&bus);
++	if (ret)
++		return ret;
++
++	return i2c_get_chip(bus, chip_addr, devp);
++}
++
++#endif
++
+ /**
+  * i2c_init_board() - Board-specific I2C bus init
+  *
+@@ -143,7 +199,7 @@
+  *
+  * Returns I2C bus speed in Hz.
+  */
+-#if !defined(CONFIG_SYS_I2C)
++#if !defined(CONFIG_SYS_I2C) && !defined(CONFIG_DM_I2C)
+ /*
+  * TODO: Implement architecture-specific get/set functions
+  * Should go away, if we switched completely to new multibus support
+@@ -182,12 +238,12 @@
+  *
+  * Returns the address length.
+  */
+-static uint get_alen(char *arg)
++static uint get_alen(char *arg, int default_len)
+ {
+ 	int	j;
+ 	int	alen;
+ 
+-	alen = 1;
++	alen = default_len;
+ 	for (j = 0; j < 8; j++) {
+ 		if (arg[j] == '.') {
+ 			alen = arg[j+1] - '0';
+@@ -227,8 +283,13 @@
+ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+ {
+ 	u_char	chip;
+-	uint	devaddr, alen, length;
++	uint	devaddr, length;
++	int alen;
+ 	u_char  *memaddr;
++	int ret;
++#ifdef CONFIG_DM_I2C
++	struct udevice *dev;
++#endif
+ 
+ 	if (argc != 5)
+ 		return CMD_RET_USAGE;
+@@ -243,7 +304,7 @@
+ 	 * 2 bytes long.  Some day it might be 3 bytes long :-).
+ 	 */
+ 	devaddr = simple_strtoul(argv[2], NULL, 16);
+-	alen = get_alen(argv[2]);
++	alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
+ 	if (alen > 3)
+ 		return CMD_RET_USAGE;
+ 
+@@ -257,18 +318,31 @@
+ 	 */
+ 	memaddr = (u_char *)simple_strtoul(argv[4], NULL, 16);
+ 
+-	if (i2c_read(chip, devaddr, alen, memaddr, length) != 0) {
+-		i2c_report_err(-1, I2C_ERR_READ);
+-		return 1;
+-	}
++#ifdef CONFIG_DM_I2C
++	ret = i2c_get_cur_bus_chip(chip, &dev);
++	if (!ret && alen != -1)
++		ret = i2c_set_chip_offset_len(dev, alen);
++	if (!ret)
++		ret = i2c_read(dev, devaddr, memaddr, length);
++#else
++	ret = i2c_read(chip, devaddr, alen, memaddr, length);
++#endif
++	if (ret)
++		return i2c_report_err(ret, I2C_ERR_READ);
++
+ 	return 0;
+ }
+ 
+ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+ {
+ 	u_char	chip;
+-	uint	devaddr, alen, length;
++	uint	devaddr, length;
++	int alen;
+ 	u_char  *memaddr;
++	int ret;
++#ifdef CONFIG_DM_I2C
++	struct udevice *dev;
++#endif
+ 
+ 	if (argc != 5)
+ 		return cmd_usage(cmdtp);
+@@ -288,7 +362,7 @@
+ 	 * 2 bytes long.  Some day it might be 3 bytes long :-).
+ 	 */
+ 	devaddr = simple_strtoul(argv[3], NULL, 16);
+-	alen = get_alen(argv[3]);
++	alen = get_alen(argv[3], DEFAULT_ADDR_LEN);
+ 	if (alen > 3)
+ 		return cmd_usage(cmdtp);
+ 
+@@ -297,10 +371,22 @@
+ 	 */
+ 	length = simple_strtoul(argv[4], NULL, 16);
+ 
++#ifdef CONFIG_DM_I2C
++	ret = i2c_get_cur_bus_chip(chip, &dev);
++	if (!ret && alen != -1)
++		ret = i2c_set_chip_offset_len(dev, alen);
++	if (ret)
++		return i2c_report_err(ret, I2C_ERR_WRITE);
++#endif
++
+ 	while (length-- > 0) {
+-		if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) {
+-			return i2c_report_err(-1, I2C_ERR_WRITE);
+-		}
++#ifdef CONFIG_DM_I2C
++		ret = i2c_write(dev, devaddr++, memaddr++, 1);
++#else
++		ret = i2c_write(chip, devaddr++, alen, memaddr++, 1);
++#endif
++		if (ret)
++			return i2c_report_err(ret, I2C_ERR_WRITE);
+ /*
+  * No write delay with FRAM devices.
+  */
+@@ -311,6 +397,38 @@
+ 	return 0;
+ }
+ 
++#ifdef CONFIG_DM_I2C
++static int do_i2c_flags(cmd_tbl_t *cmdtp, int flag, int argc,
++			char *const argv[])
++{
++	struct udevice *dev;
++	uint flags;
++	int chip;
++	int ret;
++
++	if (argc < 2)
++		return CMD_RET_USAGE;
++
++	chip = simple_strtoul(argv[1], NULL, 16);
++	ret = i2c_get_cur_bus_chip(chip, &dev);
++	if (ret)
++		return i2c_report_err(ret, I2C_ERR_READ);
++
++	if (argc > 2) {
++		flags = simple_strtoul(argv[2], NULL, 16);
++		ret = i2c_set_chip_flags(dev, flags);
++	} else  {
++		ret = i2c_get_chip_flags(dev, &flags);
++		if (!ret)
++			printf("%x\n", flags);
++	}
++	if (ret)
++		return i2c_report_err(ret, I2C_ERR_READ);
++
++	return 0;
++}
++#endif
++
+ /**
+  * do_i2c_md() - Handle the "i2c md" command-line command
+  * @cmdtp:	Command data struct pointer
+@@ -327,8 +445,13 @@
+ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+ {
+ 	u_char	chip;
+-	uint	addr, alen, length;
++	uint	addr, length;
++	int alen;
+ 	int	j, nbytes, linebytes;
++	int ret;
++#ifdef CONFIG_DM_I2C
++	struct udevice *dev;
++#endif
+ 
+ 	/* We use the last specified parameters, unless new ones are
+ 	 * entered.
+@@ -356,7 +479,7 @@
+ 		 * 2 bytes long.  Some day it might be 3 bytes long :-).
+ 		 */
+ 		addr = simple_strtoul(argv[2], NULL, 16);
+-		alen = get_alen(argv[2]);
++		alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
+ 		if (alen > 3)
+ 			return CMD_RET_USAGE;
+ 
+@@ -368,6 +491,14 @@
+ 			length = simple_strtoul(argv[3], NULL, 16);
+ 	}
+ 
++#ifdef CONFIG_DM_I2C
++	ret = i2c_get_cur_bus_chip(chip, &dev);
++	if (!ret && alen != -1)
++		ret = i2c_set_chip_offset_len(dev, alen);
++	if (ret)
++		return i2c_report_err(ret, I2C_ERR_READ);
++#endif
++
+ 	/*
+ 	 * Print the lines.
+ 	 *
+@@ -381,8 +512,13 @@
+ 
+ 		linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
+ 
+-		if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0)
+-			i2c_report_err(-1, I2C_ERR_READ);
++#ifdef CONFIG_DM_I2C
++		ret = i2c_read(dev, addr, linebuf, linebytes);
++#else
++		ret = i2c_read(chip, addr, alen, linebuf, linebytes);
++#endif
++		if (ret)
++			i2c_report_err(ret, I2C_ERR_READ);
+ 		else {
+ 			printf("%04x:", addr);
+ 			cp = linebuf;
+@@ -429,9 +565,13 @@
+ {
+ 	uchar	chip;
+ 	ulong	addr;
+-	uint	alen;
++	int	alen;
+ 	uchar	byte;
+ 	int	count;
++	int ret;
++#ifdef CONFIG_DM_I2C
++	struct udevice *dev;
++#endif
+ 
+ 	if ((argc < 4) || (argc > 5))
+ 		return CMD_RET_USAGE;
+@@ -445,10 +585,17 @@
+ 	 * Address is always specified.
+ 	 */
+ 	addr = simple_strtoul(argv[2], NULL, 16);
+-	alen = get_alen(argv[2]);
++	alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
+ 	if (alen > 3)
+ 		return CMD_RET_USAGE;
+ 
++#ifdef CONFIG_DM_I2C
++	ret = i2c_get_cur_bus_chip(chip, &dev);
++	if (!ret && alen != -1)
++		ret = i2c_set_chip_offset_len(dev, alen);
++	if (ret)
++		return i2c_report_err(ret, I2C_ERR_WRITE);
++#endif
+ 	/*
+ 	 * Value to write is always specified.
+ 	 */
+@@ -463,8 +610,13 @@
+ 		count = 1;
+ 
+ 	while (count-- > 0) {
+-		if (i2c_write(chip, addr++, alen, &byte, 1) != 0)
+-			i2c_report_err(-1, I2C_ERR_WRITE);
++#ifdef CONFIG_DM_I2C
++		ret = i2c_write(dev, addr++, &byte, 1);
++#else
++		ret = i2c_write(chip, addr++, alen, &byte, 1);
++#endif
++		if (ret)
++			i2c_report_err(ret, I2C_ERR_WRITE);
+ 		/*
+ 		 * Wait for the write to complete.  The write can take
+ 		 * up to 10mSec (we allow a little more time).
+@@ -499,11 +651,15 @@
+ {
+ 	uchar	chip;
+ 	ulong	addr;
+-	uint	alen;
++	int	alen;
+ 	int	count;
+ 	uchar	byte;
+ 	ulong	crc;
+ 	ulong	err;
++	int ret = 0;
++#ifdef CONFIG_DM_I2C
++	struct udevice *dev;
++#endif
+ 
+ 	if (argc < 4)
+ 		return CMD_RET_USAGE;
+@@ -517,10 +673,17 @@
+ 	 * Address is always specified.
+ 	 */
+ 	addr = simple_strtoul(argv[2], NULL, 16);
+-	alen = get_alen(argv[2]);
++	alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
+ 	if (alen > 3)
+ 		return CMD_RET_USAGE;
+ 
++#ifdef CONFIG_DM_I2C
++	ret = i2c_get_cur_bus_chip(chip, &dev);
++	if (!ret && alen != -1)
++		ret = i2c_set_chip_offset_len(dev, alen);
++	if (ret)
++		return i2c_report_err(ret, I2C_ERR_READ);
++#endif
+ 	/*
+ 	 * Count is always specified
+ 	 */
+@@ -534,13 +697,18 @@
+ 	crc = 0;
+ 	err = 0;
+ 	while (count-- > 0) {
+-		if (i2c_read(chip, addr, alen, &byte, 1) != 0)
++#ifdef CONFIG_DM_I2C
++		ret = i2c_read(dev, addr, &byte, 1);
++#else
++		ret = i2c_read(chip, addr, alen, &byte, 1);
++#endif
++		if (ret)
+ 			err++;
+ 		crc = crc32 (crc, &byte, 1);
+ 		addr++;
+ 	}
+ 	if (err > 0)
+-		i2c_report_err(-1, I2C_ERR_READ);
++		i2c_report_err(ret, I2C_ERR_READ);
+ 	else
+ 		printf ("%08lx\n", crc);
+ 
+@@ -568,10 +736,14 @@
+ {
+ 	uchar	chip;
+ 	ulong	addr;
+-	uint	alen;
++	int	alen;
+ 	ulong	data;
+ 	int	size = 1;
+ 	int	nbytes;
++	int ret;
++#ifdef CONFIG_DM_I2C
++	struct udevice *dev;
++#endif
+ 
+ 	if (argc != 3)
+ 		return CMD_RET_USAGE;
+@@ -601,19 +773,32 @@
+ 		 * Address is always specified.
+ 		 */
+ 		addr = simple_strtoul(argv[2], NULL, 16);
+-		alen = get_alen(argv[2]);
++		alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
+ 		if (alen > 3)
+ 			return CMD_RET_USAGE;
+ 	}
+ 
++#ifdef CONFIG_DM_I2C
++	ret = i2c_get_cur_bus_chip(chip, &dev);
++	if (!ret && alen != -1)
++		ret = i2c_set_chip_offset_len(dev, alen);
++	if (ret)
++		return i2c_report_err(ret, I2C_ERR_WRITE);
++#endif
++
+ 	/*
+ 	 * Print the address, followed by value.  Then accept input for
+ 	 * the next value.  A non-converted value exits.
+ 	 */
+ 	do {
+ 		printf("%08lx:", addr);
+-		if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0)
+-			i2c_report_err(-1, I2C_ERR_READ);
++#ifdef CONFIG_DM_I2C
++		ret = i2c_read(dev, addr, (uchar *)&data, size);
++#else
++		ret = i2c_read(chip, addr, alen, (uchar *)&data, size);
++#endif
++		if (ret)
++			i2c_report_err(ret, I2C_ERR_READ);
+ 		else {
+ 			data = cpu_to_be32(data);
+ 			if (size == 1)
+@@ -655,8 +840,15 @@
+ 				 * good enough to not time out
+ 				 */
+ 				bootretry_reset_cmd_timeout();
+-				if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0)
+-					i2c_report_err(-1, I2C_ERR_WRITE);
++#ifdef CONFIG_DM_I2C
++				ret = i2c_write(dev, addr, (uchar *)&data,
++						size);
++#else
++				ret = i2c_write(chip, addr, alen,
++						(uchar *)&data, size);
++#endif
++				if (ret)
++					i2c_report_err(ret, I2C_ERR_WRITE);
+ #ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
+ 				udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+ #endif
+@@ -697,6 +889,13 @@
+ 	int k, skip;
+ 	unsigned int bus = GET_BUS_NUM;
+ #endif	/* NOPROBES */
++	int ret;
++#ifdef CONFIG_DM_I2C
++	struct udevice *bus, *dev;
++
++	if (i2c_get_cur_bus(&bus))
++		return CMD_RET_FAILURE;
++#endif
+ 
+ 	if (argc == 2)
+ 		addr = simple_strtol(argv[1], 0, 16);
+@@ -717,7 +916,12 @@
+ 		if (skip)
+ 			continue;
+ #endif
+-		if (i2c_probe(j) == 0) {
++#ifdef CONFIG_DM_I2C
++		ret = i2c_probe(bus, j, 0, &dev);
++#else
++		ret = i2c_probe(j);
++#endif
++		if (ret == 0) {
+ 			printf(" %02X", j);
+ 			found++;
+ 		}
+@@ -754,11 +958,15 @@
+ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+ {
+ 	u_char	chip;
+-	ulong	alen;
++	int alen;
+ 	uint	addr;
+ 	uint	length;
+ 	u_char	bytes[16];
+ 	int	delay;
++	int ret;
++#ifdef CONFIG_DM_I2C
++	struct udevice *dev;
++#endif
+ 
+ 	if (argc < 3)
+ 		return CMD_RET_USAGE;
+@@ -772,9 +980,16 @@
+ 	 * Address is always specified.
+ 	 */
+ 	addr = simple_strtoul(argv[2], NULL, 16);
+-	alen = get_alen(argv[2]);
++	alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
+ 	if (alen > 3)
+ 		return CMD_RET_USAGE;
++#ifdef CONFIG_DM_I2C
++	ret = i2c_get_cur_bus_chip(chip, &dev);
++	if (!ret && alen != -1)
++		ret = i2c_set_chip_offset_len(dev, alen);
++	if (ret)
++		return i2c_report_err(ret, I2C_ERR_WRITE);
++#endif
+ 
+ 	/*
+ 	 * Length is the number of objects, not number of bytes.
+@@ -794,8 +1009,13 @@
+ 	 * Run the loop...
+ 	 */
+ 	while (1) {
+-		if (i2c_read(chip, addr, alen, bytes, length) != 0)
+-			i2c_report_err(-1, I2C_ERR_READ);
++#ifdef CONFIG_DM_I2C
++		ret = i2c_read(dev, addr, bytes, length);
++#else
++		ret = i2c_read(chip, addr, alen, bytes, length);
++#endif
++		if (ret)
++			i2c_report_err(ret, I2C_ERR_READ);
+ 		udelay(delay);
+ 	}
+ 
+@@ -1345,6 +1565,10 @@
+ {
+ 	u_char chip;
+ 	struct edid1_info edid;
++	int ret;
++#ifdef CONFIG_DM_I2C
++	struct udevice *dev;
++#endif
+ 
+ 	if (argc < 2) {
+ 		cmd_usage(cmdtp);
+@@ -1352,10 +1576,15 @@
+ 	}
+ 
+ 	chip = simple_strtoul(argv[1], NULL, 16);
+-	if (i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)) != 0) {
+-		i2c_report_err(-1, I2C_ERR_READ);
+-		return 1;
+-	}
++#ifdef CONFIG_DM_I2C
++	ret = i2c_get_cur_bus_chip(chip, &dev);
++	if (!ret)
++		ret = i2c_read(dev, 0, (uchar *)&edid, sizeof(edid));
++#else
++	ret = i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid));
++#endif
++	if (ret)
++		return i2c_report_err(ret, I2C_ERR_READ);
+ 
+ 	if (edid_check_info(&edid)) {
+ 		puts("Content isn't valid EDID.\n");
+@@ -1437,17 +1666,28 @@
+  * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+  * on error.
+  */
+-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
++#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) || \
++		defined(CONFIG_DM_I2C)
+ static int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc,
+ 				char * const argv[])
+ {
+ 	int		ret = 0;
+-	unsigned int	bus_no;
++	int	bus_no;
+ 
+-	if (argc == 1)
++	if (argc == 1) {
+ 		/* querying current setting */
+-		printf("Current bus is %d\n", i2c_get_bus_num());
+-	else {
++#ifdef CONFIG_DM_I2C
++		struct udevice *bus;
++
++		if (!i2c_get_cur_bus(&bus))
++			bus_no = bus->seq;
++		else
++			bus_no = -1;
++#else
++		bus_no = i2c_get_bus_num();
++#endif
++		printf("Current bus is %d\n", bus_no);
++	} else {
+ 		bus_no = simple_strtoul(argv[1], NULL, 10);
+ #if defined(CONFIG_SYS_I2C)
+ 		if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) {
+@@ -1478,13 +1718,28 @@
+ {
+ 	int speed, ret=0;
+ 
+-	if (argc == 1)
++#ifdef CONFIG_DM_I2C
++	struct udevice *bus;
++
++	if (i2c_get_cur_bus(&bus))
++		return 1;
++#endif
++	if (argc == 1) {
++#ifdef CONFIG_DM_I2C
++		speed = i2c_get_bus_speed(bus);
++#else
++		speed = i2c_get_bus_speed();
++#endif
+ 		/* querying current speed */
+-		printf("Current bus speed=%d\n", i2c_get_bus_speed());
+-	else {
++		printf("Current bus speed=%d\n", speed);
++	} else {
+ 		speed = simple_strtoul(argv[1], NULL, 10);
+ 		printf("Setting bus speed to %d Hz\n", speed);
++#ifdef CONFIG_DM_I2C
++		ret = i2c_set_bus_speed(bus, speed);
++#else
+ 		ret = i2c_set_bus_speed(speed);
++#endif
+ 		if (ret)
+ 			printf("Failure changing bus speed (%d)\n", ret);
+ 	}
+@@ -1532,7 +1787,16 @@
+  */
+ static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+ {
+-#if defined(CONFIG_SYS_I2C)
++#if defined(CONFIG_DM_I2C)
++	struct udevice *bus;
++
++	if (i2c_get_cur_bus(&bus))
++		return CMD_RET_FAILURE;
++	if (i2c_deblock(bus)) {
++		printf("Error: Not supported by the driver\n");
++		return CMD_RET_FAILURE;
++	}
++#elif defined(CONFIG_SYS_I2C)
+ 	i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
+ #else
+ 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+@@ -1546,7 +1810,7 @@
+ #endif
+ 	U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
+ #if defined(CONFIG_SYS_I2C) || \
+-	defined(CONFIG_I2C_MULTI_BUS)
++	defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
+ 	U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
+ #endif  /* CONFIG_I2C_MULTI_BUS */
+ #if defined(CONFIG_I2C_EDID)
+@@ -1560,6 +1824,9 @@
+ 	U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
+ 	U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
+ 	U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""),
++#ifdef CONFIG_DM_I2C
++	U_BOOT_CMD_MKENT(flags, 2, 1, do_i2c_flags, "", ""),
++#endif
+ 	U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""),
+ #if defined(CONFIG_CMD_SDRAM)
+ 	U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""),
+@@ -1610,7 +1877,7 @@
+ #endif
+ 	"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
+ #if defined(CONFIG_SYS_I2C) || \
+-	defined(CONFIG_I2C_MULTI_BUS)
++	defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
+ 	"i2c dev [dev] - show or set current I2C bus\n"
+ #endif  /* CONFIG_I2C_MULTI_BUS */
+ #if defined(CONFIG_I2C_EDID)
+@@ -1622,8 +1889,11 @@
+ 	"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
+ 	"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
+ 	"i2c probe [address] - test for and show device(s) on the I2C bus\n"
+-	"i2c read chip address[.0, .1, .2] length memaddress - read to memory \n"
++	"i2c read chip address[.0, .1, .2] length memaddress - read to memory\n"
+ 	"i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n"
++#ifdef CONFIG_DM_I2C
++	"i2c flags chip [flags] - set or get chip flags\n"
++#endif
+ 	"i2c reset - re-init the I2C Controller\n"
+ #if defined(CONFIG_CMD_SDRAM)
+ 	"i2c sdram chip - print SDRAM configuration information\n"
+diff -ruN u-boot-2015.01-rc3/common/cmd_mmc.c u-boot/common/cmd_mmc.c
+--- u-boot-2015.01-rc3/common/cmd_mmc.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/common/cmd_mmc.c	2015-01-01 17:34:32.529498727 +0100
+@@ -90,7 +90,8 @@
+ 	puts("Capacity: ");
+ 	print_size(mmc->capacity, "\n");
+ 
+-	printf("Bus Width: %d-bit\n", mmc->bus_width);
++	printf("Bus Width: %d-bit%s\n", mmc->bus_width,
++			mmc->ddr_mode ? " DDR" : "");
+ }
+ static struct mmc *init_mmc_device(int dev, bool force_init)
+ {
+diff -ruN u-boot-2015.01-rc3/common/fb_mmc.c u-boot/common/fb_mmc.c
+--- u-boot-2015.01-rc3/common/fb_mmc.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/common/fb_mmc.c	2015-01-01 17:34:32.537498596 +0100
+@@ -4,12 +4,17 @@
+  * SPDX-License-Identifier:	GPL-2.0+
+  */
+ 
++#include <config.h>
+ #include <common.h>
+ #include <fb_mmc.h>
+ #include <part.h>
+ #include <aboot.h>
+ #include <sparse_format.h>
+ 
++#ifndef CONFIG_FASTBOOT_GPT_NAME
++#define CONFIG_FASTBOOT_GPT_NAME GPT_ENTRY_NAME
++#endif
++
+ /* The 64 defined bytes plus the '\0' */
+ #define RESPONSE_LEN	(64 + 1)
+ 
+@@ -62,7 +67,6 @@
+ void fb_mmc_flash_write(const char *cmd, void *download_buffer,
+ 			unsigned int download_bytes, char *response)
+ {
+-	int ret;
+ 	block_dev_desc_t *dev_desc;
+ 	disk_partition_t info;
+ 
+@@ -76,8 +80,24 @@
+ 		return;
+ 	}
+ 
+-	ret = get_partition_info_efi_by_name(dev_desc, cmd, &info);
+-	if (ret) {
++	if (strcmp(cmd, CONFIG_FASTBOOT_GPT_NAME) == 0) {
++		printf("%s: updating MBR, Primary and Backup GPT(s)\n",
++		       __func__);
++		if (is_valid_gpt_buf(dev_desc, download_buffer)) {
++			printf("%s: invalid GPT - refusing to write to flash\n",
++			       __func__);
++			fastboot_fail("invalid GPT partition");
++			return;
++		}
++		if (write_mbr_and_gpt_partitions(dev_desc, download_buffer)) {
++			printf("%s: writing GPT partitions failed\n", __func__);
++			fastboot_fail("writing GPT partitions failed");
++			return;
++		}
++		printf("........ success\n");
++		fastboot_okay("");
++		return;
++	} else if (get_partition_info_efi_by_name(dev_desc, cmd, &info)) {
+ 		error("cannot find partition: '%s'\n", cmd);
+ 		fastboot_fail("cannot find partition");
+ 		return;
+diff -ruN u-boot-2015.01-rc3/common/hash.c u-boot/common/hash.c
+--- u-boot-2015.01-rc3/common/hash.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/common/hash.c	2015-01-01 17:34:32.537498596 +0100
+@@ -256,7 +256,7 @@
+ 			env_var = 1;
+ 	}
+ 
+-	if (env_var) {
++	if (!env_var) {
+ 		ulong addr;
+ 		void *buf;
+ 
+@@ -347,7 +347,7 @@
+ {
+ 	ulong addr, len;
+ 
+-	if (argc < 2)
++	if ((argc < 2) || ((flags & HASH_FLAG_VERIFY) && (argc < 3)))
+ 		return CMD_RET_USAGE;
+ 
+ 	addr = simple_strtoul(*argv++, NULL, 16);
+@@ -380,8 +380,6 @@
+ #else
+ 		if (0) {
+ #endif
+-			if (!argc)
+-				return CMD_RET_USAGE;
+ 			if (parse_verify_sum(algo, *argv, vsum,
+ 					flags & HASH_FLAG_ENV)) {
+ 				printf("ERROR: %s does not contain a valid "
+diff -ruN u-boot-2015.01-rc3/configs/armadillo-800eva_defconfig u-boot/configs/armadillo-800eva_defconfig
+--- u-boot-2015.01-rc3/configs/armadillo-800eva_defconfig	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/configs/armadillo-800eva_defconfig	2015-01-01 17:34:32.557498268 +0100
+@@ -1,3 +1,3 @@
+ CONFIG_ARM=y
+-+S:CONFIG_RMOBILE=y
++CONFIG_RMOBILE=y
+ CONFIG_TARGET_ARMADILLO_800EVA=y
+diff -ruN u-boot-2015.01-rc3/configs/crownbay_defconfig u-boot/configs/crownbay_defconfig
+--- u-boot-2015.01-rc3/configs/crownbay_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/configs/crownbay_defconfig	2015-01-01 17:34:32.561498202 +0100
+@@ -0,0 +1,6 @@
++CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xfff00000"
++CONFIG_X86=y
++CONFIG_TARGET_CROWNBAY=y
++CONFIG_OF_CONTROL=y
++CONFIG_OF_SEPARATE=y
++CONFIG_DEFAULT_DEVICE_TREE="crownbay"
+diff -ruN u-boot-2015.01-rc3/configs/kzm9g_defconfig u-boot/configs/kzm9g_defconfig
+--- u-boot-2015.01-rc3/configs/kzm9g_defconfig	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/configs/kzm9g_defconfig	2015-01-01 17:34:32.561498202 +0100
+@@ -1,3 +1,3 @@
+ CONFIG_ARM=y
+-+S:CONFIG_RMOBILE=y
++CONFIG_RMOBILE=y
+ CONFIG_TARGET_KZM9G=y
+diff -ruN u-boot-2015.01-rc3/configs/ls1021aqds_nand_defconfig u-boot/configs/ls1021aqds_nand_defconfig
+--- u-boot-2015.01-rc3/configs/ls1021aqds_nand_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/configs/ls1021aqds_nand_defconfig	2015-01-01 17:34:32.561498202 +0100
+@@ -0,0 +1,4 @@
++CONFIG_SPL=y
++CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
+++S:CONFIG_ARM=y
+++S:CONFIG_TARGET_LS1021AQDS=y
+diff -ruN u-boot-2015.01-rc3/configs/ls1021aqds_qspi_defconfig u-boot/configs/ls1021aqds_qspi_defconfig
+--- u-boot-2015.01-rc3/configs/ls1021aqds_qspi_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/configs/ls1021aqds_qspi_defconfig	2015-01-01 17:34:32.561498202 +0100
+@@ -0,0 +1,3 @@
++CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+++S:CONFIG_ARM=y
+++S:CONFIG_TARGET_LS1021AQDS=y
+diff -ruN u-boot-2015.01-rc3/configs/ls1021aqds_sdcard_defconfig u-boot/configs/ls1021aqds_sdcard_defconfig
+--- u-boot-2015.01-rc3/configs/ls1021aqds_sdcard_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/configs/ls1021aqds_sdcard_defconfig	2015-01-01 17:34:32.565498136 +0100
+@@ -0,0 +1,4 @@
++CONFIG_SPL=y
++CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
+++S:CONFIG_ARM=y
+++S:CONFIG_TARGET_LS1021AQDS=y
+diff -ruN u-boot-2015.01-rc3/configs/ls1021atwr_qspi_defconfig u-boot/configs/ls1021atwr_qspi_defconfig
+--- u-boot-2015.01-rc3/configs/ls1021atwr_qspi_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/configs/ls1021atwr_qspi_defconfig	2015-01-01 17:34:32.565498136 +0100
+@@ -0,0 +1,3 @@
++CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+++S:CONFIG_ARM=y
+++S:CONFIG_TARGET_LS1021ATWR=y
+diff -ruN u-boot-2015.01-rc3/configs/ls1021atwr_sdcard_defconfig u-boot/configs/ls1021atwr_sdcard_defconfig
+--- u-boot-2015.01-rc3/configs/ls1021atwr_sdcard_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/configs/ls1021atwr_sdcard_defconfig	2015-01-01 17:34:32.565498136 +0100
+@@ -0,0 +1,4 @@
++CONFIG_SPL=y
++CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
+++S:CONFIG_ARM=y
+++S:CONFIG_TARGET_LS1021ATWR=y
+diff -ruN u-boot-2015.01-rc3/configs/nyan-big_defconfig u-boot/configs/nyan-big_defconfig
+--- u-boot-2015.01-rc3/configs/nyan-big_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/configs/nyan-big_defconfig	2015-01-01 17:34:32.565498136 +0100
+@@ -0,0 +1,5 @@
+++S:CONFIG_ARM=y
+++S:CONFIG_TEGRA=y
+++S:CONFIG_TEGRA124=y
+++S:CONFIG_TARGET_NYAN_BIG=y
++CONFIG_DEFAULT_DEVICE_TREE="tegra124-nyan-big"
+diff -ruN u-boot-2015.01-rc3/configs/ph1_ld4_defconfig u-boot/configs/ph1_ld4_defconfig
+--- u-boot-2015.01-rc3/configs/ph1_ld4_defconfig	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/configs/ph1_ld4_defconfig	2015-01-01 17:34:32.565498136 +0100
+@@ -1,4 +1,3 @@
+-CONFIG_SPL=y
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ +S:CONFIG_ARM=y
+diff -ruN u-boot-2015.01-rc3/configs/ph1_pro4_defconfig u-boot/configs/ph1_pro4_defconfig
+--- u-boot-2015.01-rc3/configs/ph1_pro4_defconfig	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/configs/ph1_pro4_defconfig	2015-01-01 17:34:32.565498136 +0100
+@@ -1,4 +1,3 @@
+-CONFIG_SPL=y
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ +S:CONFIG_ARM=y
+diff -ruN u-boot-2015.01-rc3/configs/ph1_sld8_defconfig u-boot/configs/ph1_sld8_defconfig
+--- u-boot-2015.01-rc3/configs/ph1_sld8_defconfig	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/configs/ph1_sld8_defconfig	2015-01-01 17:34:32.565498136 +0100
+@@ -1,4 +1,3 @@
+-CONFIG_SPL=y
+ CONFIG_FIT=y
+ CONFIG_FIT_VERBOSE=y
+ +S:CONFIG_ARM=y
+diff -ruN u-boot-2015.01-rc3/configs/stv0991_defconfig u-boot/configs/stv0991_defconfig
+--- u-boot-2015.01-rc3/configs/stv0991_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/configs/stv0991_defconfig	2015-01-01 17:34:32.569498072 +0100
+@@ -0,0 +1,3 @@
++CONFIG_SYS_EXTRA_OPTIONS="stv0991"
++CONFIG_ARM=y
++CONFIG_TARGET_STV0991=y
+diff -ruN u-boot-2015.01-rc3/disk/part_efi.c u-boot/disk/part_efi.c
+--- u-boot-2015.01-rc3/disk/part_efi.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/disk/part_efi.c	2015-01-01 17:34:32.573498006 +0100
+@@ -69,6 +69,107 @@
+ 			sizeof(efi_guid_t));
+ }
+ 
++static int validate_gpt_header(gpt_header *gpt_h, lbaint_t lba,
++		lbaint_t lastlba)
++{
++	uint32_t crc32_backup = 0;
++	uint32_t calc_crc32;
++
++	/* Check the GPT header signature */
++	if (le64_to_cpu(gpt_h->signature) != GPT_HEADER_SIGNATURE) {
++		printf("%s signature is wrong: 0x%llX != 0x%llX\n",
++		       "GUID Partition Table Header",
++		       le64_to_cpu(gpt_h->signature),
++		       GPT_HEADER_SIGNATURE);
++		return -1;
++	}
++
++	/* Check the GUID Partition Table CRC */
++	memcpy(&crc32_backup, &gpt_h->header_crc32, sizeof(crc32_backup));
++	memset(&gpt_h->header_crc32, 0, sizeof(gpt_h->header_crc32));
++
++	calc_crc32 = efi_crc32((const unsigned char *)gpt_h,
++		le32_to_cpu(gpt_h->header_size));
++
++	memcpy(&gpt_h->header_crc32, &crc32_backup, sizeof(crc32_backup));
++
++	if (calc_crc32 != le32_to_cpu(crc32_backup)) {
++		printf("%s CRC is wrong: 0x%x != 0x%x\n",
++		       "GUID Partition Table Header",
++		       le32_to_cpu(crc32_backup), calc_crc32);
++		return -1;
++	}
++
++	/*
++	 * Check that the my_lba entry points to the LBA that contains the GPT
++	 */
++	if (le64_to_cpu(gpt_h->my_lba) != lba) {
++		printf("GPT: my_lba incorrect: %llX != " LBAF "\n",
++		       le64_to_cpu(gpt_h->my_lba),
++		       lba);
++		return -1;
++	}
++
++	/*
++	 * Check that the first_usable_lba and that the last_usable_lba are
++	 * within the disk.
++	 */
++	if (le64_to_cpu(gpt_h->first_usable_lba) > lastlba) {
++		printf("GPT: first_usable_lba incorrect: %llX > " LBAF "\n",
++		       le64_to_cpu(gpt_h->first_usable_lba), lastlba);
++		return -1;
++	}
++	if (le64_to_cpu(gpt_h->last_usable_lba) > lastlba) {
++		printf("GPT: last_usable_lba incorrect: %llX > " LBAF "\n",
++		       le64_to_cpu(gpt_h->last_usable_lba), lastlba);
++		return -1;
++	}
++
++	debug("GPT: first_usable_lba: %llX last_usable_lba: %llX last lba: "
++	      LBAF "\n", le64_to_cpu(gpt_h->first_usable_lba),
++	      le64_to_cpu(gpt_h->last_usable_lba), lastlba);
++
++	return 0;
++}
++
++static int validate_gpt_entries(gpt_header *gpt_h, gpt_entry *gpt_e)
++{
++	uint32_t calc_crc32;
++
++	/* Check the GUID Partition Table Entry Array CRC */
++	calc_crc32 = efi_crc32((const unsigned char *)gpt_e,
++		le32_to_cpu(gpt_h->num_partition_entries) *
++		le32_to_cpu(gpt_h->sizeof_partition_entry));
++
++	if (calc_crc32 != le32_to_cpu(gpt_h->partition_entry_array_crc32)) {
++		printf("%s: 0x%x != 0x%x\n",
++		       "GUID Partition Table Entry Array CRC is wrong",
++		       le32_to_cpu(gpt_h->partition_entry_array_crc32),
++		       calc_crc32);
++		return -1;
++	}
++
++	return 0;
++}
++
++static void prepare_backup_gpt_header(gpt_header *gpt_h)
++{
++	uint32_t calc_crc32;
++	uint64_t val;
++
++	/* recalculate the values for the Backup GPT Header */
++	val = le64_to_cpu(gpt_h->my_lba);
++	gpt_h->my_lba = gpt_h->alternate_lba;
++	gpt_h->alternate_lba = cpu_to_le64(val);
++	gpt_h->partition_entry_lba =
++			cpu_to_le64(le64_to_cpu(gpt_h->last_usable_lba) + 1);
++	gpt_h->header_crc32 = 0;
++
++	calc_crc32 = efi_crc32((const unsigned char *)gpt_h,
++			       le32_to_cpu(gpt_h->header_size));
++	gpt_h->header_crc32 = cpu_to_le32(calc_crc32);
++}
++
+ #ifdef CONFIG_EFI_PARTITION
+ /*
+  * Public Functions (include/part.h)
+@@ -259,7 +360,6 @@
+ 	const int pte_blk_cnt = BLOCK_CNT((gpt_h->num_partition_entries
+ 					   * sizeof(gpt_entry)), dev_desc);
+ 	u32 calc_crc32;
+-	u64 val;
+ 
+ 	debug("max lba: %x\n", (u32) dev_desc->lba);
+ 	/* Setup the Protective MBR */
+@@ -284,15 +384,7 @@
+ 	    != pte_blk_cnt)
+ 		goto err;
+ 
+-	/* recalculate the values for the Backup GPT Header */
+-	val = le64_to_cpu(gpt_h->my_lba);
+-	gpt_h->my_lba = gpt_h->alternate_lba;
+-	gpt_h->alternate_lba = cpu_to_le64(val);
+-	gpt_h->header_crc32 = 0;
+-
+-	calc_crc32 = efi_crc32((const unsigned char *)gpt_h,
+-			      le32_to_cpu(gpt_h->header_size));
+-	gpt_h->header_crc32 = cpu_to_le32(calc_crc32);
++	prepare_backup_gpt_header(gpt_h);
+ 
+ 	if (dev_desc->block_write(dev_desc->dev,
+ 				  (lbaint_t)le64_to_cpu(gpt_h->last_usable_lba)
+@@ -455,6 +547,97 @@
+ 	free(gpt_h);
+ 	return ret;
+ }
++
++int is_valid_gpt_buf(block_dev_desc_t *dev_desc, void *buf)
++{
++	gpt_header *gpt_h;
++	gpt_entry *gpt_e;
++
++	/* determine start of GPT Header in the buffer */
++	gpt_h = buf + (GPT_PRIMARY_PARTITION_TABLE_LBA *
++		       dev_desc->blksz);
++	if (validate_gpt_header(gpt_h, GPT_PRIMARY_PARTITION_TABLE_LBA,
++				dev_desc->lba))
++		return -1;
++
++	/* determine start of GPT Entries in the buffer */
++	gpt_e = buf + (le64_to_cpu(gpt_h->partition_entry_lba) *
++		       dev_desc->blksz);
++	if (validate_gpt_entries(gpt_h, gpt_e))
++		return -1;
++
++	return 0;
++}
++
++int write_mbr_and_gpt_partitions(block_dev_desc_t *dev_desc, void *buf)
++{
++	gpt_header *gpt_h;
++	gpt_entry *gpt_e;
++	int gpt_e_blk_cnt;
++	lbaint_t lba;
++	int cnt;
++
++	if (is_valid_gpt_buf(dev_desc, buf))
++		return -1;
++
++	/* determine start of GPT Header in the buffer */
++	gpt_h = buf + (GPT_PRIMARY_PARTITION_TABLE_LBA *
++		       dev_desc->blksz);
++
++	/* determine start of GPT Entries in the buffer */
++	gpt_e = buf + (le64_to_cpu(gpt_h->partition_entry_lba) *
++		       dev_desc->blksz);
++	gpt_e_blk_cnt = BLOCK_CNT((le32_to_cpu(gpt_h->num_partition_entries) *
++				   le32_to_cpu(gpt_h->sizeof_partition_entry)),
++				  dev_desc);
++
++	/* write MBR */
++	lba = 0;	/* MBR is always at 0 */
++	cnt = 1;	/* MBR (1 block) */
++	if (dev_desc->block_write(dev_desc->dev, lba, cnt, buf) != cnt) {
++		printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n",
++		       __func__, "MBR", cnt, lba);
++		return 1;
++	}
++
++	/* write Primary GPT */
++	lba = GPT_PRIMARY_PARTITION_TABLE_LBA;
++	cnt = 1;	/* GPT Header (1 block) */
++	if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_h) != cnt) {
++		printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n",
++		       __func__, "Primary GPT Header", cnt, lba);
++		return 1;
++	}
++
++	lba = le64_to_cpu(gpt_h->partition_entry_lba);
++	cnt = gpt_e_blk_cnt;
++	if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_e) != cnt) {
++		printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n",
++		       __func__, "Primary GPT Entries", cnt, lba);
++		return 1;
++	}
++
++	prepare_backup_gpt_header(gpt_h);
++
++	/* write Backup GPT */
++	lba = le64_to_cpu(gpt_h->partition_entry_lba);
++	cnt = gpt_e_blk_cnt;
++	if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_e) != cnt) {
++		printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n",
++		       __func__, "Backup GPT Entries", cnt, lba);
++		return 1;
++	}
++
++	lba = le64_to_cpu(gpt_h->my_lba);
++	cnt = 1;	/* GPT Header (1 block) */
++	if (dev_desc->block_write(dev_desc->dev, lba, cnt, gpt_h) != cnt) {
++		printf("%s: failed writing '%s' (%d blks at 0x" LBAF ")\n",
++		       __func__, "Backup GPT Header", cnt, lba);
++		return 1;
++	}
++
++	return 0;
++}
+ #endif
+ 
+ /*
+@@ -511,10 +694,6 @@
+ static int is_gpt_valid(block_dev_desc_t *dev_desc, u64 lba,
+ 			gpt_header *pgpt_head, gpt_entry **pgpt_pte)
+ {
+-	u32 crc32_backup = 0;
+-	u32 calc_crc32;
+-	u64 lastlba;
+-
+ 	if (!dev_desc || !pgpt_head) {
+ 		printf("%s: Invalid Argument(s)\n", __func__);
+ 		return 0;
+@@ -527,55 +706,8 @@
+ 		return 0;
+ 	}
+ 
+-	/* Check the GPT header signature */
+-	if (le64_to_cpu(pgpt_head->signature) != GPT_HEADER_SIGNATURE) {
+-		printf("GUID Partition Table Header signature is wrong:"
+-			"0x%llX != 0x%llX\n",
+-			le64_to_cpu(pgpt_head->signature),
+-			GPT_HEADER_SIGNATURE);
+-		return 0;
+-	}
+-
+-	/* Check the GUID Partition Table CRC */
+-	memcpy(&crc32_backup, &pgpt_head->header_crc32, sizeof(crc32_backup));
+-	memset(&pgpt_head->header_crc32, 0, sizeof(pgpt_head->header_crc32));
+-
+-	calc_crc32 = efi_crc32((const unsigned char *)pgpt_head,
+-		le32_to_cpu(pgpt_head->header_size));
+-
+-	memcpy(&pgpt_head->header_crc32, &crc32_backup, sizeof(crc32_backup));
+-
+-	if (calc_crc32 != le32_to_cpu(crc32_backup)) {
+-		printf("GUID Partition Table Header CRC is wrong:"
+-			"0x%x != 0x%x\n",
+-		       le32_to_cpu(crc32_backup), calc_crc32);
+-		return 0;
+-	}
+-
+-	/* Check that the my_lba entry points to the LBA that contains the GPT */
+-	if (le64_to_cpu(pgpt_head->my_lba) != lba) {
+-		printf("GPT: my_lba incorrect: %llX != %" PRIX64 "\n",
+-		       le64_to_cpu(pgpt_head->my_lba),
+-		       lba);
++	if (validate_gpt_header(pgpt_head, (lbaint_t)lba, dev_desc->lba))
+ 		return 0;
+-	}
+-
+-	/* Check the first_usable_lba and last_usable_lba are within the disk. */
+-	lastlba = (u64)dev_desc->lba;
+-	if (le64_to_cpu(pgpt_head->first_usable_lba) > lastlba) {
+-		printf("GPT: first_usable_lba incorrect: %llX > %" PRIX64 "\n",
+-		       le64_to_cpu(pgpt_head->first_usable_lba), lastlba);
+-		return 0;
+-	}
+-	if (le64_to_cpu(pgpt_head->last_usable_lba) > lastlba) {
+-		printf("GPT: last_usable_lba incorrect: %llX > %" PRIX64 "\n",
+-		       le64_to_cpu(pgpt_head->last_usable_lba), lastlba);
+-		return 0;
+-	}
+-
+-	debug("GPT: first_usable_lba: %llX last_usable_lba %llX last lba %"
+-	      PRIX64 "\n", le64_to_cpu(pgpt_head->first_usable_lba),
+-	      le64_to_cpu(pgpt_head->last_usable_lba), lastlba);
+ 
+ 	/* Read and allocate Partition Table Entries */
+ 	*pgpt_pte = alloc_read_gpt_entries(dev_desc, pgpt_head);
+@@ -584,17 +716,7 @@
+ 		return 0;
+ 	}
+ 
+-	/* Check the GUID Partition Table Entry Array CRC */
+-	calc_crc32 = efi_crc32((const unsigned char *)*pgpt_pte,
+-		le32_to_cpu(pgpt_head->num_partition_entries) *
+-		le32_to_cpu(pgpt_head->sizeof_partition_entry));
+-
+-	if (calc_crc32 != le32_to_cpu(pgpt_head->partition_entry_array_crc32)) {
+-		printf("GUID Partition Table Entry Array CRC is wrong:"
+-			"0x%x != 0x%x\n",
+-			le32_to_cpu(pgpt_head->partition_entry_array_crc32),
+-			calc_crc32);
+-
++	if (validate_gpt_entries(pgpt_head, *pgpt_pte)) {
+ 		free(*pgpt_pte);
+ 		return 0;
+ 	}
+diff -ruN u-boot-2015.01-rc3/doc/README.x86 u-boot/doc/README.x86
+--- u-boot-2015.01-rc3/doc/README.x86	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/doc/README.x86	2015-01-01 17:34:32.597497612 +0100
+@@ -0,0 +1,126 @@
++#
++# Copyright (C) 2014, Simon Glass <sjg@chromium.org>
++# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++#
++# SPDX-License-Identifier:	GPL-2.0+
++#
++
++U-Boot on x86
++=============
++
++This document describes the information about U-Boot running on x86 targets,
++including supported boards, build instructions, todo list, etc.
++
++Status
++------
++U-Boot supports running as a coreboot [1] payload on x86. So far only Link
++(Chromebook Pixel) has been tested, but it should work with minimal adjustments
++on other x86 boards since coreboot deals with most of the low-level details.
++
++U-Boot also supports booting directly from x86 reset vector without coreboot,
++aka raw support or bare support. Currently Link and Intel Crown Bay board
++support running U-Boot 'bare metal'.
++
++As for loading OS, U-Boot supports directly booting a 32-bit or 64-bit Linux
++kernel as part of a FIT image. It also supports a compressed zImage.
++
++Build Instructions
++------------------
++Building U-Boot as a coreboot payload is just like building U-Boot for targets
++on other architectures, like below:
++
++$ make coreboot-x86_defconfig
++$ make all
++
++Building ROM version of U-Boot (hereafter referred to as u-boot.rom) is a
++little bit tricky, as generally it requires several binary blobs which are not
++shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is
++not turned on by default in the U-Boot source tree. Firstly, you need turn it
++on by uncommenting the following line in the main U-Boot Makefile:
++
++# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
++
++Link-specific instructions:
++
++First, you need the following binary blobs:
++
++* descriptor.bin - Intel flash descriptor
++* me.bin - Intel Management Engine
++* mrc.bin - Memory Reference Code, which sets up SDRAM
++* video ROM - sets up the display
++
++You can get these binary blobs by:
++
++$ git clone http://review.coreboot.org/p/blobs.git
++$ cd blobs
++
++Find the following files:
++
++* ./mainboard/google/link/descriptor.bin
++* ./mainboard/google/link/me.bin
++* ./northbridge/intel/sandybridge/systemagent-ivybridge.bin
++
++The 3rd one should be renamed to mrc.bin.
++As for the video ROM, you can get it here [2].
++Make sure all these binary blobs are put in the board directory.
++
++Now you can build U-Boot and obtain u-boot.rom:
++
++$ make chromebook_link_defconfig
++$ make all
++
++Intel Crown Bay specific instructions:
++
++U-Boot support of Intel Crown Bay board [3] relies on a binary blob called
++Firmware Support Package [4] to perform all the necessary initialization steps
++as documented in the BIOS Writer Guide, including initialization of the CPU,
++memory controller, chipset and certain bus interfaces.
++
++Download the Intel FSP for Atom E6xx series and Platform Controller Hub EG20T,
++install it on your host and locate the FSP binary blob. Note this platform
++also requires a Chipset Micro Code (CMC) state machine binary to be present in
++the SPI flash where u-boot.rom resides, and this CMC binary blob can be found
++in this FSP package too.
++
++* ./FSP/QUEENSBAY_FSP_GOLD_001_20-DECEMBER-2013.fd
++* ./Microcode/C0_22211.BIN
++
++Rename the first one to fsp.bin and second one to cmc.bin and put them in the
++board directory.
++
++Now you can build U-Boot and obtaim u-boot.rom
++
++$ make crownbay_defconfig
++$ make all
++
++CPU Microcode
++-------------
++Modern CPU usually requires a special bit stream called microcode [5] to be
++loaded on the processor after power up in order to function properly. U-Boot
++has already integrated these as hex dumps in the source tree.
++
++Driver Model
++------------
++x86 has been converted to use driver model for serial and GPIO.
++
++Device Tree
++-----------
++x86 uses device tree to configure the board thus requires CONFIG_OF_CONTROL to
++be turned on. Not every device on the board is configured via devie tree, but
++more and more devices will be added as time goes by. Check out the directory
++arch/x86/dts/ for these device tree source files.
++
++TODO List
++---------
++- MTRR support (for performance)
++- Audio
++- Chrome OS verified boot
++- SMI and ACPI support, to provide platform info and facilities to Linux
++
++References
++----------
++[1] http://www.coreboot.org
++[2] http://www.coreboot.org/~stepan/pci8086,0166.rom
++[3] http://www.intel.com/content/www/us/en/embedded/design-tools/evaluation-platforms/atom-e660-eg20t-development-kit.html
++[4] http://www.intel.com/fsp
++[5] http://en.wikipedia.org/wiki/Microcode
+diff -ruN u-boot-2015.01-rc3/drivers/bios_emulator/besys.c u-boot/drivers/bios_emulator/besys.c
+--- u-boot-2015.01-rc3/drivers/bios_emulator/besys.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/bios_emulator/besys.c	2015-01-01 17:34:32.605497481 +0100
+@@ -48,8 +48,8 @@
+ ****************************************************************************/
+ 
+ #define __io
+-#include <asm/io.h>
+ #include <common.h>
++#include <asm/io.h>
+ #include "biosemui.h"
+ 
+ /*------------------------- Global Variables ------------------------------*/
+diff -ruN u-boot-2015.01-rc3/drivers/bios_emulator/bios.c u-boot/drivers/bios_emulator/bios.c
+--- u-boot-2015.01-rc3/drivers/bios_emulator/bios.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/bios_emulator/bios.c	2015-01-01 17:34:32.605497481 +0100
+@@ -42,8 +42,8 @@
+ ****************************************************************************/
+ 
+ #define __io
+-#include <asm/io.h>
+ #include <common.h>
++#include <asm/io.h>
+ #include "biosemui.h"
+ 
+ /*----------------------------- Implementation ----------------------------*/
+diff -ruN u-boot-2015.01-rc3/drivers/block/dwc_ahsata.c u-boot/drivers/block/dwc_ahsata.c
+--- u-boot-2015.01-rc3/drivers/block/dwc_ahsata.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/block/dwc_ahsata.c	2015-01-01 17:34:32.613497350 +0100
+@@ -594,22 +594,24 @@
+ 
+ int reset_sata(int dev)
+ {
+-	struct ahci_probe_ent *probe_ent =
+-			(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+-	struct sata_host_regs *host_mmio =
+-			(struct sata_host_regs *)probe_ent->mmio_base;
++	struct ahci_probe_ent *probe_ent;
++	struct sata_host_regs *host_mmio;
+ 
+ 	if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
+ 		printf("The sata index %d is out of ranges\n\r", dev);
+ 		return -1;
+ 	}
+ 
++	probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
++	if (NULL == probe_ent)
++		/* not initialized, so nothing to reset */
++		return 0;
++
++	host_mmio = (struct sata_host_regs *)probe_ent->mmio_base;
+ 	setbits_le32(&host_mmio->ghc, SATA_HOST_GHC_HR);
+ 	while (readl(&host_mmio->ghc) & SATA_HOST_GHC_HR)
+ 		udelay(100);
+ 
+-	disable_sata_clock();
+-
+ 	return 0;
+ }
+ 
+diff -ruN u-boot-2015.01-rc3/drivers/core/device.c u-boot/drivers/core/device.c
+--- u-boot-2015.01-rc3/drivers/core/device.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/core/device.c	2015-01-01 17:34:32.621497219 +0100
+@@ -234,7 +234,7 @@
+ void *dev_get_platdata(struct udevice *dev)
+ {
+ 	if (!dev) {
+-		dm_warn("%s: null device", __func__);
++		dm_warn("%s: null device\n", __func__);
+ 		return NULL;
+ 	}
+ 
+@@ -244,7 +244,7 @@
+ void *dev_get_priv(struct udevice *dev)
+ {
+ 	if (!dev) {
+-		dm_warn("%s: null device", __func__);
++		dm_warn("%s: null device\n", __func__);
+ 		return NULL;
+ 	}
+ 
+@@ -254,7 +254,7 @@
+ void *dev_get_parentdata(struct udevice *dev)
+ {
+ 	if (!dev) {
+-		dm_warn("%s: null device", __func__);
++		dm_warn("%s: null device\n", __func__);
+ 		return NULL;
+ 	}
+ 
+diff -ruN u-boot-2015.01-rc3/drivers/crypto/fsl/jr.c u-boot/drivers/crypto/fsl/jr.c
+--- u-boot-2015.01-rc3/drivers/crypto/fsl/jr.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/crypto/fsl/jr.c	2015-01-01 17:34:32.621497219 +0100
+@@ -246,7 +246,7 @@
+ 	struct result op;
+ 	int ret = 0;
+ 
+-	memset(&op, sizeof(op), 0);
++	memset(&op, 0, sizeof(op));
+ 
+ 	ret = jr_enqueue(desc, desc_done, &op);
+ 	if (ret) {
+diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/arm_ddr_gen3.c u-boot/drivers/ddr/fsl/arm_ddr_gen3.c
+--- u-boot-2015.01-rc3/drivers/ddr/fsl/arm_ddr_gen3.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/ddr/fsl/arm_ddr_gen3.c	2015-01-01 17:34:32.621497219 +0100
+@@ -92,7 +92,6 @@
+ 	ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0);
+ 	ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1);
+ 	ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+-	ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+ 	ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+ 	ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
+ 	ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
+@@ -105,9 +104,6 @@
+ 	ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+ 	ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
+ 	ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
+-	ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
+-	ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+-
+ 	ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4);
+ 	ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5);
+ 	ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
+@@ -128,7 +124,24 @@
+ 	ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
+ 	ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
+ 	ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
+-	ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
++#ifdef CONFIG_DEEP_SLEEP
++	if (is_warm_boot()) {
++		ddr_out32(&ddr->sdram_cfg_2,
++			  regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
++		ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
++		ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
++
++		/* DRAM VRef will not be trained */
++		ddr_out32(&ddr->ddr_cdr2,
++			  regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
++	} else
++#endif
++	{
++		ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
++		ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
++		ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
++		ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
++	}
+ 	ddr_out32(&ddr->err_disable, regs->err_disable);
+ 	ddr_out32(&ddr->err_int_en, regs->err_int_en);
+ 	for (i = 0; i < 32; i++) {
+@@ -167,8 +180,20 @@
+ 	udelay(500);
+ 	asm volatile("dsb sy;isb");
+ 
++#ifdef CONFIG_DEEP_SLEEP
++	if (is_warm_boot()) {
++		/* enter self-refresh */
++		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
++		temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
++		ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
++		/* do board specific memory setup */
++		board_mem_sleep_setup();
++
++		temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
++	} else
++#endif
++		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
+ 	/* Let the controller go */
+-	temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
+ 	ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
+ 	asm volatile("dsb sy;isb");
+ 
+@@ -211,4 +236,12 @@
+ 
+ 	if (timeout <= 0)
+ 		printf("Waiting for D_INIT timeout. Memory may not work.\n");
++#ifdef CONFIG_DEEP_SLEEP
++	if (is_warm_boot()) {
++		/* exit self-refresh */
++		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
++		temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
++		ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
++	}
++#endif
+ }
+diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/ctrl_regs.c u-boot/drivers/ddr/fsl/ctrl_regs.c
+--- u-boot-2015.01-rc3/drivers/ddr/fsl/ctrl_regs.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/ddr/fsl/ctrl_regs.c	2015-01-01 17:34:32.625497153 +0100
+@@ -324,6 +324,7 @@
+ #elif defined(CONFIG_SYS_FSL_DDR3)
+ 	unsigned int data_rate = get_ddr_freq(0);
+ 	int txp;
++	unsigned int ip_rev;
+ 	int odt_overlap;
+ 	/*
+ 	 * (tXARD and tXARDS). Empirical?
+@@ -336,7 +337,25 @@
+ 	 */
+ 	txp = max((int)mclk_ps * 3, (mclk_ps > 1540 ? 7500 : 6000));
+ 
+-	tmrd_mclk = 4;
++	ip_rev = fsl_ddr_get_version();
++	if (ip_rev >= 0x40700) {
++		/*
++		 * MRS_CYC = max(tMRD, tMOD)
++		 * tMRD = 4nCK (8nCK for RDIMM)
++		 * tMOD = max(12nCK, 15ns)
++		 */
++		tmrd_mclk = max((unsigned int)12, picos_to_mclk(15000));
++	} else {
++		/*
++		 * MRS_CYC = tMRD
++		 * tMRD = 4nCK (8nCK for RDIMM)
++		 */
++		if (popts->registered_dimm_en)
++			tmrd_mclk = 8;
++		else
++			tmrd_mclk = 4;
++	}
++
+ 	/* set the turnaround time */
+ 
+ 	/*
+diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/fsl_ddr_gen4.c u-boot/drivers/ddr/fsl/fsl_ddr_gen4.c
+--- u-boot-2015.01-rc3/drivers/ddr/fsl/fsl_ddr_gen4.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/ddr/fsl/fsl_ddr_gen4.c	2015-01-01 17:34:32.625497153 +0100
+@@ -103,7 +103,6 @@
+ 	ddr_out32(&ddr->dq_map_1, regs->dq_map_1);
+ 	ddr_out32(&ddr->dq_map_2, regs->dq_map_2);
+ 	ddr_out32(&ddr->dq_map_3, regs->dq_map_3);
+-	ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+ 	ddr_out32(&ddr->sdram_cfg_3, regs->ddr_sdram_cfg_3);
+ 	ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+ 	ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
+@@ -124,8 +123,6 @@
+ 	ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
+ 	ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+ 	ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
+-	ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
+-	ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+ 	ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+ #ifndef CONFIG_SYS_FSL_DDR_EMU
+ 	/*
+@@ -147,7 +144,24 @@
+ 	ddr_out32(&ddr->ddr_sdram_rcw_5, regs->ddr_sdram_rcw_5);
+ 	ddr_out32(&ddr->ddr_sdram_rcw_6, regs->ddr_sdram_rcw_6);
+ 	ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
+-	ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
++#ifdef CONFIG_DEEP_SLEEP
++	if (is_warm_boot()) {
++		ddr_out32(&ddr->sdram_cfg_2,
++			  regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
++		ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
++		ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
++
++		/* DRAM VRef will not be trained */
++		ddr_out32(&ddr->ddr_cdr2,
++			  regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
++	} else
++#endif
++	{
++		ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
++		ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
++		ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
++		ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
++	}
+ 	ddr_out32(&ddr->err_disable, regs->err_disable);
+ 	ddr_out32(&ddr->err_int_en, regs->err_int_en);
+ 	for (i = 0; i < 32; i++) {
+@@ -187,8 +201,20 @@
+ 	mb();
+ 	isb();
+ 
++#ifdef CONFIG_DEEP_SLEEP
++	if (is_warm_boot()) {
++		/* enter self-refresh */
++		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
++		temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
++		ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
++		/* do board specific memory setup */
++		board_mem_sleep_setup();
++
++		temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
++	} else
++#endif
++		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
+ 	/* Let the controller go */
+-	temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
+ 	ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
+ 	mb();
+ 	isb();
+@@ -233,4 +259,12 @@
+ 
+ 	if (timeout <= 0)
+ 		printf("Waiting for D_INIT timeout. Memory may not work.\n");
++#ifdef CONFIG_DEEP_SLEEP
++	if (is_warm_boot()) {
++		/* exit self-refresh */
++		temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
++		temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
++		ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
++	}
++#endif
+ }
+diff -ruN u-boot-2015.01-rc3/drivers/ddr/fsl/mpc85xx_ddr_gen3.c u-boot/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
+--- u-boot-2015.01-rc3/drivers/ddr/fsl/mpc85xx_ddr_gen3.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/ddr/fsl/mpc85xx_ddr_gen3.c	2015-01-01 17:34:32.625497153 +0100
+@@ -15,8 +15,6 @@
+ #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
+ #endif
+ 
+-DECLARE_GLOBAL_DATA_PTR;
+-
+ /*
+  * regs has the to-be-set values for DDR controller registers
+  * ctrl_num is the DDR controller number
+@@ -44,16 +42,6 @@
+ 	u32 save1, save2;
+ #endif
+ 
+-#ifdef CONFIG_DEEP_SLEEP
+-	const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+-	bool sleep_flag = 0;
+-#endif
+-
+-#ifdef CONFIG_DEEP_SLEEP
+-	if (in_be32(&gur->scrtsr[0]) & (1 << 3))
+-		sleep_flag = 1;
+-#endif
+-
+ 	switch (ctrl_num) {
+ 	case 0:
+ 		ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+@@ -130,13 +118,6 @@
+ 	out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
+ 	out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
+ 	out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+-#ifdef CONFIG_DEEP_SLEEP
+-	if (sleep_flag)
+-		out_be32(&ddr->sdram_cfg_2,
+-			 regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+-	else
+-#endif
+-		out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+ 	out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+ 	out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
+ 	out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
+@@ -149,17 +130,6 @@
+ 	out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+ 	out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
+ 	out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
+-#ifdef CONFIG_DEEP_SLEEP
+-	if (sleep_flag) {
+-		out_be32(&ddr->init_addr, 0);
+-		out_be32(&ddr->init_ext_addr, (1 << 31));
+-	} else
+-#endif
+-	{
+-		out_be32(&ddr->init_addr, regs->ddr_init_addr);
+-		out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+-	}
+-
+ 	out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
+ 	out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
+ 	out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
+@@ -180,7 +150,24 @@
+ 	out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
+ 	out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
+ 	out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
+-	out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
++#ifdef CONFIG_DEEP_SLEEP
++	if (is_warm_boot()) {
++		out_be32(&ddr->sdram_cfg_2,
++			 regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
++		out_be32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
++		out_be32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
++
++		/* DRAM VRef will not be trained */
++		out_be32(&ddr->ddr_cdr2,
++			 regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
++	} else
++#endif
++	{
++		out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
++		out_be32(&ddr->init_addr, regs->ddr_init_addr);
++		out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
++		out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
++	}
+ 	out_be32(&ddr->err_disable, regs->err_disable);
+ 	out_be32(&ddr->err_int_en, regs->err_int_en);
+ 	for (i = 0; i < 32; i++) {
+@@ -400,21 +387,17 @@
+ 	asm volatile("sync;isync");
+ 
+ #ifdef CONFIG_DEEP_SLEEP
+-	if (sleep_flag) {
++	if (is_warm_boot()) {
+ 		/* enter self-refresh */
+-		setbits_be32(&ddr->sdram_cfg_2, (1 << 31));
++		setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
+ 		/* do board specific memory setup */
+ 		board_mem_sleep_setup();
+-	}
+-#endif
+-
+-	/* Let the controller go */
+-#ifdef CONFIG_DEEP_SLEEP
+-	if (sleep_flag)
+ 		temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
+-	else
++	} else
+ #endif
+ 		temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI);
++
++	/* Let the controller go */
+ 	out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
+ 	asm volatile("sync;isync");
+ 
+@@ -566,8 +549,8 @@
+ 	}
+ #endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
+ #ifdef CONFIG_DEEP_SLEEP
+-	if (sleep_flag)
++	if (is_warm_boot())
+ 		/* exit self-refresh */
+-		clrbits_be32(&ddr->sdram_cfg_2, (1 << 31));
++		clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
+ #endif
+ }
+diff -ruN u-boot-2015.01-rc3/drivers/dfu/dfu.c u-boot/drivers/dfu/dfu.c
+--- u-boot-2015.01-rc3/drivers/dfu/dfu.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/dfu/dfu.c	2015-01-01 17:34:32.629497087 +0100
+@@ -17,7 +17,6 @@
+ #include <linux/list.h>
+ #include <linux/compiler.h>
+ 
+-static bool dfu_detach_request;
+ static LIST_HEAD(dfu_list);
+ static int dfu_alt_num;
+ static int alt_num_cnt;
+@@ -39,21 +38,6 @@
+ 	return true;
+ }
+ 
+-bool dfu_detach(void)
+-{
+-	return dfu_detach_request;
+-}
+-
+-void dfu_trigger_detach(void)
+-{
+-	dfu_detach_request = true;
+-}
+-
+-void dfu_clear_detach(void)
+-{
+-	dfu_detach_request = false;
+-}
+-
+ static int dfu_find_alt_num(const char *s)
+ {
+ 	int i = 0;
+@@ -111,8 +95,12 @@
+ 		return dfu_buf;
+ 
+ 	s = getenv("dfu_bufsiz");
+-	dfu_buf_size = s ? (unsigned long)simple_strtol(s, NULL, 16) :
+-			CONFIG_SYS_DFU_DATA_BUF_SIZE;
++	if (s)
++		dfu_buf_size = (unsigned long)simple_strtol(s, NULL, 0);
++
++	if (!s || !dfu_buf_size)
++		dfu_buf_size = CONFIG_SYS_DFU_DATA_BUF_SIZE;
++
+ 	if (dfu->max_buf_size && dfu_buf_size > dfu->max_buf_size)
+ 		dfu_buf_size = dfu->max_buf_size;
+ 
+@@ -544,10 +532,35 @@
+ int dfu_get_alt(char *name)
+ {
+ 	struct dfu_entity *dfu;
++	char *str;
+ 
+ 	list_for_each_entry(dfu, &dfu_list, list) {
+-		if (!strncmp(dfu->name, name, strlen(dfu->name)))
+-			return dfu->alt;
++		if (dfu->name[0] != '/') {
++			if (!strncmp(dfu->name, name, strlen(dfu->name)))
++				return dfu->alt;
++		} else {
++			/*
++			 * One must also consider absolute path
++			 * (/boot/bin/uImage) available at dfu->name when
++			 * compared "plain" file name (uImage)
++			 *
++			 * It is the case for e.g. thor gadget where lthor SW
++			 * sends only the file name, so only the very last part
++			 * of path must be checked for equality
++			 */
++
++			str = strstr(dfu->name, name);
++			if (!str)
++				continue;
++
++			/*
++			 * Check if matching substring is the last element of
++			 * dfu->name (uImage)
++			 */
++			if (strlen(dfu->name) ==
++			    ((str - dfu->name) + strlen(name)))
++				return dfu->alt;
++		}
+ 	}
+ 
+ 	return -ENODEV;
+diff -ruN u-boot-2015.01-rc3/drivers/dfu/dfu_mmc.c u-boot/drivers/dfu/dfu_mmc.c
+--- u-boot-2015.01-rc3/drivers/dfu/dfu_mmc.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/dfu/dfu_mmc.c	2015-01-01 17:34:32.629497087 +0100
+@@ -40,10 +40,16 @@
+ static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu,
+ 			u64 offset, void *buf, long *len)
+ {
+-	struct mmc *mmc = find_mmc_device(dfu->data.mmc.dev_num);
++	struct mmc *mmc;
+ 	u32 blk_start, blk_count, n = 0;
+ 	int ret, part_num_bkp = 0;
+ 
++	mmc = find_mmc_device(dfu->data.mmc.dev_num);
++	if (!mmc) {
++		error("Device MMC %d - not found!", dfu->data.mmc.dev_num);
++		return -ENODEV;
++	}
++
+ 	/*
+ 	 * We must ensure that we work in lba_blk_size chunks, so ALIGN
+ 	 * this value.
+diff -ruN u-boot-2015.01-rc3/drivers/gpio/intel_ich6_gpio.c u-boot/drivers/gpio/intel_ich6_gpio.c
+--- u-boot-2015.01-rc3/drivers/gpio/intel_ich6_gpio.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/gpio/intel_ich6_gpio.c	2015-01-01 17:34:32.637496957 +0100
+@@ -34,69 +34,21 @@
+ #include <asm/gpio.h>
+ #include <asm/io.h>
+ #include <asm/pci.h>
+-#ifdef CONFIG_X86_RESET_VECTOR
+-#include <asm/arch/pch.h>
+-#define SUPPORT_GPIO_SETUP
+-#endif
+ 
+ #define GPIO_PER_BANK	32
+ 
+-/* Where in config space is the register that points to the GPIO registers? */
+-#define PCI_CFG_GPIOBASE 0x48
+-
+ struct ich6_bank_priv {
+ 	/* These are I/O addresses */
+-	uint32_t use_sel;
+-	uint32_t io_sel;
+-	uint32_t lvl;
++	uint16_t use_sel;
++	uint16_t io_sel;
++	uint16_t lvl;
+ };
+ 
+-#ifdef SUPPORT_GPIO_SETUP
+-static void setup_pch_gpios(const struct pch_gpio_map *gpio)
+-{
+-	u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc;
+-
+-	/* GPIO Set 1 */
+-	if (gpio->set1.level)
+-		outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL);
+-	if (gpio->set1.mode)
+-		outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL);
+-	if (gpio->set1.direction)
+-		outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL);
+-	if (gpio->set1.reset)
+-		outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1);
+-	if (gpio->set1.invert)
+-		outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV);
+-	if (gpio->set1.blink)
+-		outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK);
+-
+-	/* GPIO Set 2 */
+-	if (gpio->set2.level)
+-		outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2);
+-	if (gpio->set2.mode)
+-		outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2);
+-	if (gpio->set2.direction)
+-		outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2);
+-	if (gpio->set2.reset)
+-		outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2);
+-
+-	/* GPIO Set 3 */
+-	if (gpio->set3.level)
+-		outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3);
+-	if (gpio->set3.mode)
+-		outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3);
+-	if (gpio->set3.direction)
+-		outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3);
+-	if (gpio->set3.reset)
+-		outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3);
+-}
+-
+ /* TODO: Move this to device tree, or platform data */
+ void ich_gpio_set_gpio_map(const struct pch_gpio_map *map)
+ {
+ 	gd->arch.gpio_map = map;
+ }
+-#endif /* SUPPORT_GPIO_SETUP */
+ 
+ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
+ {
+@@ -105,7 +57,7 @@
+ 	u8 tmpbyte;
+ 	u16 tmpword;
+ 	u32 tmplong;
+-	u32 gpiobase;
++	u16 gpiobase;
+ 	int offset;
+ 
+ 	/* Where should it be? */
+@@ -164,11 +116,15 @@
+ 	/*
+ 	 * GPIOBASE moved to its current offset with ICH6, but prior to
+ 	 * that it was unused (or undocumented). Check that it looks
+-	 * okay: not all ones or zeros, and mapped to I/O space (bit 0).
++	 * okay: not all ones or zeros.
++	 *
++	 * Note we don't need check bit0 here, because the Tunnel Creek
++	 * GPIO base address register bit0 is reserved (read returns 0),
++	 * while on the Ivybridge the bit0 is used to indicate it is an
++	 * I/O space.
+ 	 */
+ 	tmplong = pci_read_config32(pci_dev, PCI_CFG_GPIOBASE);
+-	if (tmplong == 0x00000000 || tmplong == 0xffffffff ||
+-	    !(tmplong & 0x00000001)) {
++	if (tmplong == 0x00000000 || tmplong == 0xffffffff) {
+ 		debug("%s: unexpected GPIOBASE value\n", __func__);
+ 		return -ENODEV;
+ 	}
+@@ -179,7 +135,7 @@
+ 	 * at the offset that we just read. Bit 0 indicates that it's
+ 	 * an I/O address, not a memory address, so mask that off.
+ 	 */
+-	gpiobase = tmplong & 0xfffffffe;
++	gpiobase = tmplong & 0xfffe;
+ 	offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", -1);
+ 	if (offset == -1) {
+ 		debug("%s: Invalid register offset %d\n", __func__, offset);
+@@ -198,12 +154,11 @@
+ 	struct gpio_dev_priv *uc_priv = dev->uclass_priv;
+ 	struct ich6_bank_priv *bank = dev_get_priv(dev);
+ 
+-#ifdef SUPPORT_GPIO_SETUP
+ 	if (gd->arch.gpio_map) {
+-		setup_pch_gpios(gd->arch.gpio_map);
++		setup_pch_gpios(plat->base_addr, gd->arch.gpio_map);
+ 		gd->arch.gpio_map = NULL;
+ 	}
+-#endif
++
+ 	uc_priv->gpio_count = GPIO_PER_BANK;
+ 	uc_priv->bank_name = plat->bank_name;
+ 	bank->use_sel = plat->base_addr;
+@@ -251,6 +206,8 @@
+ 	struct ich6_bank_priv *bank = dev_get_priv(dev);
+ 	u32 tmplong;
+ 
++	gpio_set_value(offset, value);
++
+ 	tmplong = inl(bank->io_sel);
+ 	tmplong &= ~(1UL << offset);
+ 	outl(bank->io_sel, tmplong);
+diff -ruN u-boot-2015.01-rc3/drivers/i2c/i2c-emul-uclass.c u-boot/drivers/i2c/i2c-emul-uclass.c
+--- u-boot-2015.01-rc3/drivers/i2c/i2c-emul-uclass.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/i2c/i2c-emul-uclass.c	2015-01-01 17:34:32.645496825 +0100
+@@ -0,0 +1,14 @@
++/*
++ * Copyright (c) 2014 Google, Inc
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <i2c.h>
++
++UCLASS_DRIVER(i2c_emul) = {
++	.id		= UCLASS_I2C_EMUL,
++	.name		= "i2c_emul",
++};
+diff -ruN u-boot-2015.01-rc3/drivers/i2c/i2c-uclass.c u-boot/drivers/i2c/i2c-uclass.c
+--- u-boot-2015.01-rc3/drivers/i2c/i2c-uclass.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/i2c/i2c-uclass.c	2015-01-01 17:34:32.645496825 +0100
+@@ -0,0 +1,466 @@
++/*
++ * Copyright (c) 2014 Google, Inc
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <errno.h>
++#include <fdtdec.h>
++#include <i2c.h>
++#include <malloc.h>
++#include <dm/device-internal.h>
++#include <dm/lists.h>
++#include <dm/root.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#define I2C_MAX_OFFSET_LEN	4
++
++/**
++ * i2c_setup_offset() - Set up a new message with a chip offset
++ *
++ * @chip:	Chip to use
++ * @offset:	Byte offset within chip
++ * @offset_buf:	Place to put byte offset
++ * @msg:	Message buffer
++ * @return 0 if OK, -EADDRNOTAVAIL if the offset length is 0. In that case the
++ * message is still set up but will not contain an offset.
++ */
++static int i2c_setup_offset(struct dm_i2c_chip *chip, uint offset,
++			    uint8_t offset_buf[], struct i2c_msg *msg)
++{
++	int offset_len;
++
++	msg->addr = chip->chip_addr;
++	msg->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
++	msg->len = chip->offset_len;
++	msg->buf = offset_buf;
++	if (!chip->offset_len)
++		return -EADDRNOTAVAIL;
++	assert(chip->offset_len <= I2C_MAX_OFFSET_LEN);
++	offset_len = chip->offset_len;
++	while (offset_len--)
++		*offset_buf++ = offset >> (8 * offset_len);
++
++	return 0;
++}
++
++static int i2c_read_bytewise(struct udevice *dev, uint offset,
++			     uint8_t *buffer, int len)
++{
++	struct dm_i2c_chip *chip = dev_get_parentdata(dev);
++	struct udevice *bus = dev_get_parent(dev);
++	struct dm_i2c_ops *ops = i2c_get_ops(bus);
++	struct i2c_msg msg[2], *ptr;
++	uint8_t offset_buf[I2C_MAX_OFFSET_LEN];
++	int ret;
++	int i;
++
++	for (i = 0; i < len; i++) {
++		if (i2c_setup_offset(chip, offset + i, offset_buf, msg))
++			return -EINVAL;
++		ptr = msg + 1;
++		ptr->addr = chip->chip_addr;
++		ptr->flags = msg->flags | I2C_M_RD;
++		ptr->len = 1;
++		ptr->buf = &buffer[i];
++		ptr++;
++
++		ret = ops->xfer(bus, msg, ptr - msg);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
++static int i2c_write_bytewise(struct udevice *dev, uint offset,
++			     const uint8_t *buffer, int len)
++{
++	struct dm_i2c_chip *chip = dev_get_parentdata(dev);
++	struct udevice *bus = dev_get_parent(dev);
++	struct dm_i2c_ops *ops = i2c_get_ops(bus);
++	struct i2c_msg msg[1];
++	uint8_t buf[I2C_MAX_OFFSET_LEN + 1];
++	int ret;
++	int i;
++
++	for (i = 0; i < len; i++) {
++		if (i2c_setup_offset(chip, offset + i, buf, msg))
++			return -EINVAL;
++		buf[msg->len++] = buffer[i];
++
++		ret = ops->xfer(bus, msg, 1);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
++int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len)
++{
++	struct dm_i2c_chip *chip = dev_get_parentdata(dev);
++	struct udevice *bus = dev_get_parent(dev);
++	struct dm_i2c_ops *ops = i2c_get_ops(bus);
++	struct i2c_msg msg[2], *ptr;
++	uint8_t offset_buf[I2C_MAX_OFFSET_LEN];
++	int msg_count;
++
++	if (!ops->xfer)
++		return -ENOSYS;
++	if (chip->flags & DM_I2C_CHIP_RD_ADDRESS)
++		return i2c_read_bytewise(dev, offset, buffer, len);
++	ptr = msg;
++	if (!i2c_setup_offset(chip, offset, offset_buf, ptr))
++		ptr++;
++
++	if (len) {
++		ptr->addr = chip->chip_addr;
++		ptr->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
++		ptr->flags |= I2C_M_RD;
++		ptr->len = len;
++		ptr->buf = buffer;
++		ptr++;
++	}
++	msg_count = ptr - msg;
++
++	return ops->xfer(bus, msg, msg_count);
++}
++
++int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, int len)
++{
++	struct dm_i2c_chip *chip = dev_get_parentdata(dev);
++	struct udevice *bus = dev_get_parent(dev);
++	struct dm_i2c_ops *ops = i2c_get_ops(bus);
++	struct i2c_msg msg[1];
++
++	if (!ops->xfer)
++		return -ENOSYS;
++
++	if (chip->flags & DM_I2C_CHIP_WR_ADDRESS)
++		return i2c_write_bytewise(dev, offset, buffer, len);
++	/*
++	 * The simple approach would be to send two messages here: one to
++	 * set the offset and one to write the bytes. However some drivers
++	 * will not be expecting this, and some chips won't like how the
++	 * driver presents this on the I2C bus.
++	 *
++	 * The API does not support separate offset and data. We could extend
++	 * it with a flag indicating that there is data in the next message
++	 * that needs to be processed in the same transaction. We could
++	 * instead add an additional buffer to each message. For now, handle
++	 * this in the uclass since it isn't clear what the impact on drivers
++	 * would be with this extra complication. Unfortunately this means
++	 * copying the message.
++	 *
++	 * Use the stack for small messages, malloc() for larger ones. We
++	 * need to allow space for the offset (up to 4 bytes) and the message
++	 * itself.
++	 */
++	if (len < 64) {
++		uint8_t buf[I2C_MAX_OFFSET_LEN + len];
++
++		i2c_setup_offset(chip, offset, buf, msg);
++		msg->len += len;
++		memcpy(buf + chip->offset_len, buffer, len);
++
++		return ops->xfer(bus, msg, 1);
++	} else {
++		uint8_t *buf;
++		int ret;
++
++		buf = malloc(I2C_MAX_OFFSET_LEN + len);
++		if (!buf)
++			return -ENOMEM;
++		i2c_setup_offset(chip, offset, buf, msg);
++		msg->len += len;
++		memcpy(buf + chip->offset_len, buffer, len);
++
++		ret = ops->xfer(bus, msg, 1);
++		free(buf);
++		return ret;
++	}
++}
++
++/**
++ * i2c_probe_chip() - probe for a chip on a bus
++ *
++ * @bus:	Bus to probe
++ * @chip_addr:	Chip address to probe
++ * @flags:	Flags for the chip
++ * @return 0 if found, -ENOSYS if the driver is invalid, -EREMOTEIO if the chip
++ * does not respond to probe
++ */
++static int i2c_probe_chip(struct udevice *bus, uint chip_addr,
++			  enum dm_i2c_chip_flags chip_flags)
++{
++	struct dm_i2c_ops *ops = i2c_get_ops(bus);
++	struct i2c_msg msg[1];
++	int ret;
++
++	if (ops->probe_chip) {
++		ret = ops->probe_chip(bus, chip_addr, chip_flags);
++		if (!ret || ret != -ENOSYS)
++			return ret;
++	}
++
++	if (!ops->xfer)
++		return -ENOSYS;
++
++	/* Probe with a zero-length message */
++	msg->addr = chip_addr;
++	msg->flags = chip_flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
++	msg->len = 0;
++	msg->buf = NULL;
++
++	return ops->xfer(bus, msg, 1);
++}
++
++static int i2c_bind_driver(struct udevice *bus, uint chip_addr,
++			   struct udevice **devp)
++{
++	struct dm_i2c_chip chip;
++	char name[30], *str;
++	struct udevice *dev;
++	int ret;
++
++	snprintf(name, sizeof(name), "generic_%x", chip_addr);
++	str = strdup(name);
++	ret = device_bind_driver(bus, "i2c_generic_chip_drv", str, &dev);
++	debug("%s:  device_bind_driver: ret=%d\n", __func__, ret);
++	if (ret)
++		goto err_bind;
++
++	/* Tell the device what we know about it */
++	memset(&chip, '\0', sizeof(chip));
++	chip.chip_addr = chip_addr;
++	chip.offset_len = 1;	/* we assume */
++	ret = device_probe_child(dev, &chip);
++	debug("%s:  device_probe_child: ret=%d\n", __func__, ret);
++	if (ret)
++		goto err_probe;
++
++	*devp = dev;
++	return 0;
++
++err_probe:
++	device_unbind(dev);
++err_bind:
++	free(str);
++	return ret;
++}
++
++int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp)
++{
++	struct udevice *dev;
++
++	debug("%s: Searching bus '%s' for address %02x: ", __func__,
++	      bus->name, chip_addr);
++	for (device_find_first_child(bus, &dev); dev;
++			device_find_next_child(&dev)) {
++		struct dm_i2c_chip store;
++		struct dm_i2c_chip *chip = dev_get_parentdata(dev);
++		int ret;
++
++		if (!chip) {
++			chip = &store;
++			i2c_chip_ofdata_to_platdata(gd->fdt_blob,
++						    dev->of_offset, chip);
++		}
++		if (chip->chip_addr == chip_addr) {
++			ret = device_probe(dev);
++			debug("found, ret=%d\n", ret);
++			if (ret)
++				return ret;
++			*devp = dev;
++			return 0;
++		}
++	}
++	debug("not found\n");
++	return i2c_bind_driver(bus, chip_addr, devp);
++}
++
++int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp)
++{
++	struct udevice *bus;
++	int ret;
++
++	ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus);
++	if (ret) {
++		debug("Cannot find I2C bus %d\n", busnum);
++		return ret;
++	}
++	ret = i2c_get_chip(bus, chip_addr, devp);
++	if (ret) {
++		debug("Cannot find I2C chip %02x on bus %d\n", chip_addr,
++		      busnum);
++		return ret;
++	}
++
++	return 0;
++}
++
++int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
++	      struct udevice **devp)
++{
++	int ret;
++
++	*devp = NULL;
++
++	/* First probe that chip */
++	ret = i2c_probe_chip(bus, chip_addr, chip_flags);
++	debug("%s: bus='%s', address %02x, ret=%d\n", __func__, bus->name,
++	      chip_addr, ret);
++	if (ret)
++		return ret;
++
++	/* The chip was found, see if we have a driver, and probe it */
++	ret = i2c_get_chip(bus, chip_addr, devp);
++	debug("%s:  i2c_get_chip: ret=%d\n", __func__, ret);
++
++	return ret;
++}
++
++int i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
++{
++	struct dm_i2c_ops *ops = i2c_get_ops(bus);
++	struct dm_i2c_bus *i2c = bus->uclass_priv;
++	int ret;
++
++	/*
++	 * If we have a method, call it. If not then the driver probably wants
++	 * to deal with speed changes on the next transfer. It can easily read
++	 * the current speed from this uclass
++	 */
++	if (ops->set_bus_speed) {
++		ret = ops->set_bus_speed(bus, speed);
++		if (ret)
++			return ret;
++	}
++	i2c->speed_hz = speed;
++
++	return 0;
++}
++
++/*
++ * i2c_get_bus_speed:
++ *
++ *  Returns speed of selected I2C bus in Hz
++ */
++int i2c_get_bus_speed(struct udevice *bus)
++{
++	struct dm_i2c_ops *ops = i2c_get_ops(bus);
++	struct dm_i2c_bus *i2c = bus->uclass_priv;
++
++	if (!ops->get_bus_speed)
++		return i2c->speed_hz;
++
++	return ops->get_bus_speed(bus);
++}
++
++int i2c_set_chip_flags(struct udevice *dev, uint flags)
++{
++	struct udevice *bus = dev->parent;
++	struct dm_i2c_chip *chip = dev_get_parentdata(dev);
++	struct dm_i2c_ops *ops = i2c_get_ops(bus);
++	int ret;
++
++	if (ops->set_flags) {
++		ret = ops->set_flags(dev, flags);
++		if (ret)
++			return ret;
++	}
++	chip->flags = flags;
++
++	return 0;
++}
++
++int i2c_get_chip_flags(struct udevice *dev, uint *flagsp)
++{
++	struct dm_i2c_chip *chip = dev_get_parentdata(dev);
++
++	*flagsp = chip->flags;
++
++	return 0;
++}
++
++int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len)
++{
++	struct dm_i2c_chip *chip = dev_get_parentdata(dev);
++
++	if (offset_len > I2C_MAX_OFFSET_LEN)
++		return -EINVAL;
++	chip->offset_len = offset_len;
++
++	return 0;
++}
++
++int i2c_deblock(struct udevice *bus)
++{
++	struct dm_i2c_ops *ops = i2c_get_ops(bus);
++
++	/*
++	 * We could implement a software deblocking here if we could get
++	 * access to the GPIOs used by I2C, and switch them to GPIO mode
++	 * and then back to I2C. This is somewhat beyond our powers in
++	 * driver model at present, so for now just fail.
++	 *
++	 * See https://patchwork.ozlabs.org/patch/399040/
++	 */
++	if (!ops->deblock)
++		return -ENOSYS;
++
++	return ops->deblock(bus);
++}
++
++int i2c_chip_ofdata_to_platdata(const void *blob, int node,
++				struct dm_i2c_chip *chip)
++{
++	chip->offset_len = 1;	/* default */
++	chip->flags = 0;
++	chip->chip_addr = fdtdec_get_int(gd->fdt_blob, node, "reg", -1);
++	if (chip->chip_addr == -1) {
++		debug("%s: I2C Node '%s' has no 'reg' property\n", __func__,
++		      fdt_get_name(blob, node, NULL));
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int i2c_post_probe(struct udevice *dev)
++{
++	struct dm_i2c_bus *i2c = dev->uclass_priv;
++
++	i2c->speed_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
++				     "clock-frequency", 100000);
++
++	return i2c_set_bus_speed(dev, i2c->speed_hz);
++}
++
++int i2c_post_bind(struct udevice *dev)
++{
++	/* Scan the bus for devices */
++	return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
++}
++
++UCLASS_DRIVER(i2c) = {
++	.id		= UCLASS_I2C,
++	.name		= "i2c",
++	.per_device_auto_alloc_size = sizeof(struct dm_i2c_bus),
++	.post_bind	= i2c_post_bind,
++	.post_probe	= i2c_post_probe,
++};
++
++UCLASS_DRIVER(i2c_generic) = {
++	.id		= UCLASS_I2C_GENERIC,
++	.name		= "i2c_generic",
++};
++
++U_BOOT_DRIVER(i2c_generic_chip_drv) = {
++	.name		= "i2c_generic_chip_drv",
++	.id		= UCLASS_I2C_GENERIC,
++};
+diff -ruN u-boot-2015.01-rc3/drivers/i2c/Makefile u-boot/drivers/i2c/Makefile
+--- u-boot-2015.01-rc3/drivers/i2c/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/i2c/Makefile	2015-01-01 17:34:32.641496891 +0100
+@@ -4,6 +4,7 @@
+ #
+ # SPDX-License-Identifier:	GPL-2.0+
+ #
++obj-$(CONFIG_DM_I2C) += i2c-uclass.o
+ 
+ obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o
+ obj-$(CONFIG_I2C_MV) += mv_i2c.o
+@@ -26,6 +27,7 @@
+ obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
+ obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o
+ obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o
++obj-$(CONFIG_SYS_I2C_SANDBOX) += sandbox_i2c.o i2c-emul-uclass.o
+ obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
+ obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
+ obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
+diff -ruN u-boot-2015.01-rc3/drivers/i2c/sandbox_i2c.c u-boot/drivers/i2c/sandbox_i2c.c
+--- u-boot-2015.01-rc3/drivers/i2c/sandbox_i2c.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/i2c/sandbox_i2c.c	2015-01-01 17:34:32.649496760 +0100
+@@ -0,0 +1,111 @@
++/*
++ * Simulate an I2C port
++ *
++ * Copyright (c) 2014 Google, Inc
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <errno.h>
++#include <fdtdec.h>
++#include <i2c.h>
++#include <asm/test.h>
++#include <dm/lists.h>
++#include <dm/device-internal.h>
++#include <dm/root.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++struct dm_sandbox_i2c_emul_priv {
++	struct udevice *emul;
++};
++
++static int get_emul(struct udevice *dev, struct udevice **devp,
++		    struct dm_i2c_ops **opsp)
++{
++	struct dm_i2c_chip *priv;
++	int ret;
++
++	*devp = NULL;
++	*opsp = NULL;
++	priv = dev_get_parentdata(dev);
++	if (!priv->emul) {
++		ret = dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset,
++				       false);
++		if (ret)
++			return ret;
++
++		ret = device_get_child(dev, 0, &priv->emul);
++		if (ret)
++			return ret;
++	}
++	*devp = priv->emul;
++	*opsp = i2c_get_ops(priv->emul);
++
++	return 0;
++}
++
++static int sandbox_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
++			    int nmsgs)
++{
++	struct dm_i2c_bus *i2c = bus->uclass_priv;
++	struct dm_i2c_ops *ops;
++	struct udevice *emul, *dev;
++	bool is_read;
++	int ret;
++
++	/* Special test code to return success but with no emulation */
++	if (msg->addr == SANDBOX_I2C_TEST_ADDR)
++		return 0;
++
++	ret = i2c_get_chip(bus, msg->addr, &dev);
++	if (ret)
++		return ret;
++
++	ret = get_emul(dev, &emul, &ops);
++	if (ret)
++		return ret;
++
++	/*
++	 * For testing, don't allow writing above 100KHz for writes and
++	 * 400KHz for reads
++	 */
++	is_read = nmsgs > 1;
++	if (i2c->speed_hz > (is_read ? 400000 : 100000))
++		return -EINVAL;
++	return ops->xfer(emul, msg, nmsgs);
++}
++
++static const struct dm_i2c_ops sandbox_i2c_ops = {
++	.xfer		= sandbox_i2c_xfer,
++};
++
++static int sandbox_i2c_child_pre_probe(struct udevice *dev)
++{
++	struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev);
++
++	/* Ignore our test address */
++	if (i2c_chip->chip_addr == SANDBOX_I2C_TEST_ADDR)
++		return 0;
++	if (dev->of_offset == -1)
++		return 0;
++
++	return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset,
++					   i2c_chip);
++}
++
++static const struct udevice_id sandbox_i2c_ids[] = {
++	{ .compatible = "sandbox,i2c" },
++	{ }
++};
++
++U_BOOT_DRIVER(i2c_sandbox) = {
++	.name	= "i2c_sandbox",
++	.id	= UCLASS_I2C,
++	.of_match = sandbox_i2c_ids,
++	.per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
++	.child_pre_probe = sandbox_i2c_child_pre_probe,
++	.ops	= &sandbox_i2c_ops,
++};
+diff -ruN u-boot-2015.01-rc3/drivers/i2c/tegra_i2c.c u-boot/drivers/i2c/tegra_i2c.c
+--- u-boot-2015.01-rc3/drivers/i2c/tegra_i2c.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/i2c/tegra_i2c.c	2015-01-01 17:34:32.649496760 +0100
+@@ -7,6 +7,8 @@
+  */
+ 
+ #include <common.h>
++#include <dm.h>
++#include <errno.h>
+ #include <fdtdec.h>
+ #include <i2c.h>
+ #include <asm/io.h>
+@@ -19,6 +21,12 @@
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
++enum i2c_type {
++	TYPE_114,
++	TYPE_STD,
++	TYPE_DVC,
++};
++
+ /* Information about i2c controller */
+ struct i2c_bus {
+ 	int			id;
+@@ -27,20 +35,17 @@
+ 	int			pinmux_config;
+ 	struct i2c_control	*control;
+ 	struct i2c_ctlr		*regs;
+-	int			is_dvc;	/* DVC type, rather than I2C */
+-	int			is_scs;	/* single clock source (T114+) */
++	enum i2c_type		type;
+ 	int			inited;	/* bus is inited */
+ };
+ 
+-static struct i2c_bus i2c_controllers[TEGRA_I2C_NUM_CONTROLLERS];
+-
+ static void set_packet_mode(struct i2c_bus *i2c_bus)
+ {
+ 	u32 config;
+ 
+ 	config = I2C_CNFG_NEW_MASTER_FSM_MASK | I2C_CNFG_PACKET_MODE_MASK;
+ 
+-	if (i2c_bus->is_dvc) {
++	if (i2c_bus->type == TYPE_DVC) {
+ 		struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
+ 
+ 		writel(config, &dvc->cnfg);
+@@ -65,6 +70,9 @@
+ 
+ static void i2c_init_controller(struct i2c_bus *i2c_bus)
+ {
++	if (!i2c_bus->speed)
++		return;
++	debug("%s: speed=%d\n", __func__, i2c_bus->speed);
+ 	/*
+ 	 * Use PLLP - DP-04508-001_v06 datasheet indicates a divisor of 8
+ 	 * here, in section 23.3.1, but in fact we seem to need a factor of
+@@ -73,7 +81,7 @@
+ 	clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
+ 		i2c_bus->speed * 2 * 8);
+ 
+-	if (i2c_bus->is_scs) {
++	if (i2c_bus->type == TYPE_114) {
+ 		/*
+ 		 * T114 I2C went to a single clock source for standard/fast and
+ 		 * HS clock speeds. The new clock rate setting calculation is:
+@@ -98,7 +106,7 @@
+ 	i2c_reset_controller(i2c_bus);
+ 
+ 	/* Configure I2C controller. */
+-	if (i2c_bus->is_dvc) {	/* only for DVC I2C */
++	if (i2c_bus->type == TYPE_DVC) {	/* only for DVC I2C */
+ 		struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
+ 
+ 		setbits_le32(&dvc->ctrl3, DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK);
+@@ -272,7 +280,7 @@
+ 	return error;
+ }
+ 
+-static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data,
++static int tegra_i2c_write_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
+ 				u32 len, bool end_with_repeated_start)
+ {
+ 	int error;
+@@ -286,14 +294,14 @@
+ 	trans_info.num_bytes = len;
+ 	trans_info.is_10bit_address = 0;
+ 
+-	error = send_recv_packets(bus, &trans_info);
++	error = send_recv_packets(i2c_bus, &trans_info);
+ 	if (error)
+ 		debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
+ 
+ 	return error;
+ }
+ 
+-static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data,
++static int tegra_i2c_read_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
+ 			       u32 len)
+ {
+ 	int error;
+@@ -305,52 +313,32 @@
+ 	trans_info.num_bytes = len;
+ 	trans_info.is_10bit_address = 0;
+ 
+-	error = send_recv_packets(bus, &trans_info);
++	error = send_recv_packets(i2c_bus, &trans_info);
+ 	if (error)
+ 		debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
+ 
+ 	return error;
+ }
+ 
+-#ifndef CONFIG_OF_CONTROL
+-#error "Please enable device tree support to use this driver"
+-#endif
+-
+-/**
+- * Check that a bus number is valid and return a pointer to it
+- *
+- * @param bus_num	Bus number to check / return
+- * @return pointer to bus, if valid, else NULL
+- */
+-static struct i2c_bus *tegra_i2c_get_bus(struct i2c_adapter *adap)
++static int tegra_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
+ {
+-	struct i2c_bus *bus;
++	struct i2c_bus *i2c_bus = dev_get_priv(dev);
+ 
+-	bus = &i2c_controllers[adap->hwadapnr];
+-	if (!bus->inited) {
+-		debug("%s: Bus %u not available\n", __func__, adap->hwadapnr);
+-		return NULL;
+-	}
+-
+-	return bus;
+-}
+-
+-static unsigned int tegra_i2c_set_bus_speed(struct i2c_adapter *adap,
+-			unsigned int speed)
+-{
+-	struct i2c_bus *bus;
+-
+-	bus = tegra_i2c_get_bus(adap);
+-	if (!bus)
+-		return 0;
+-	bus->speed = speed;
+-	i2c_init_controller(bus);
++	i2c_bus->speed = speed;
++	i2c_init_controller(i2c_bus);
+ 
+ 	return 0;
+ }
+ 
+-static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
++static int tegra_i2c_probe(struct udevice *dev)
+ {
++	struct i2c_bus *i2c_bus = dev_get_priv(dev);
++	const void *blob = gd->fdt_blob;
++	int node = dev->of_offset;
++	bool is_dvc;
++
++	i2c_bus->id = dev->seq;
++	i2c_bus->type = dev_get_of_data(dev);
+ 	i2c_bus->regs = (struct i2c_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ 
+ 	/*
+@@ -358,7 +346,6 @@
+ 	 * far no one needs anything other than the default.
+ 	 */
+ 	i2c_bus->pinmux_config = FUNCMUX_DEFAULT;
+-	i2c_bus->speed = fdtdec_get_int(blob, node, "clock-frequency", 0);
+ 	i2c_bus->periph_id = clock_decode_periph_id(blob, node);
+ 
+ 	/*
+@@ -371,107 +358,25 @@
+ 	 *		i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA;
+ 	 */
+ 	if (i2c_bus->periph_id == -1)
+-		return -FDT_ERR_NOTFOUND;
++		return -EINVAL;
+ 
+-	return 0;
+-}
+-
+-/*
+- * Process a list of nodes, adding them to our list of I2C ports.
+- *
+- * @param blob		fdt blob
+- * @param node_list	list of nodes to process (any <=0 are ignored)
+- * @param count		number of nodes to process
+- * @param is_dvc	1 if these are DVC ports, 0 if standard I2C
+- * @param is_scs	1 if this HW uses a single clock source (T114+)
+- * @return 0 if ok, -1 on error
+- */
+-static int process_nodes(const void *blob, int node_list[], int count,
+-			 int is_dvc, int is_scs)
+-{
+-	struct i2c_bus *i2c_bus;
+-	int i;
+-
+-	/* build the i2c_controllers[] for each controller */
+-	for (i = 0; i < count; i++) {
+-		int node = node_list[i];
+-
+-		if (node <= 0)
+-			continue;
+-
+-		i2c_bus = &i2c_controllers[i];
+-		i2c_bus->id = i;
+-
+-		if (i2c_get_config(blob, node, i2c_bus)) {
+-			printf("i2c_init_board: failed to decode bus %d\n", i);
+-			return -1;
+-		}
+-
+-		i2c_bus->is_scs = is_scs;
+-
+-		i2c_bus->is_dvc = is_dvc;
+-		if (is_dvc) {
+-			i2c_bus->control =
+-				&((struct dvc_ctlr *)i2c_bus->regs)->control;
+-		} else {
+-			i2c_bus->control = &i2c_bus->regs->control;
+-		}
+-		debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
+-		      is_dvc ? "dvc" : "i2c", i, i2c_bus->regs,
+-		      i2c_bus->periph_id, i2c_bus->speed);
+-		i2c_init_controller(i2c_bus);
+-		debug("ok\n");
+-		i2c_bus->inited = 1;
+-
+-		/* Mark position as used */
+-		node_list[i] = -1;
++	is_dvc = dev_get_of_data(dev) == TYPE_DVC;
++	if (is_dvc) {
++		i2c_bus->control =
++			&((struct dvc_ctlr *)i2c_bus->regs)->control;
++	} else {
++		i2c_bus->control = &i2c_bus->regs->control;
+ 	}
++	i2c_init_controller(i2c_bus);
++	debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
++	      is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs,
++	      i2c_bus->periph_id, i2c_bus->speed);
+ 
+ 	return 0;
+ }
+ 
+-/* Sadly there is no error return from this function */
+-void i2c_init_board(void)
+-{
+-	int node_list[TEGRA_I2C_NUM_CONTROLLERS];
+-	const void *blob = gd->fdt_blob;
+-	int count;
+-
+-	/* First check for newer (T114+) I2C ports */
+-	count = fdtdec_find_aliases_for_id(blob, "i2c",
+-			COMPAT_NVIDIA_TEGRA114_I2C, node_list,
+-			TEGRA_I2C_NUM_CONTROLLERS);
+-	if (process_nodes(blob, node_list, count, 0, 1))
+-		return;
+-
+-	/* Now get the older (T20/T30) normal I2C ports */
+-	count = fdtdec_find_aliases_for_id(blob, "i2c",
+-			COMPAT_NVIDIA_TEGRA20_I2C, node_list,
+-			TEGRA_I2C_NUM_CONTROLLERS);
+-	if (process_nodes(blob, node_list, count, 0, 0))
+-		return;
+-
+-	/* Now look for dvc ports */
+-	count = fdtdec_add_aliases_for_id(blob, "i2c",
+-			COMPAT_NVIDIA_TEGRA20_DVC, node_list,
+-			TEGRA_I2C_NUM_CONTROLLERS);
+-	if (process_nodes(blob, node_list, count, 1, 0))
+-		return;
+-}
+-
+-static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
+-{
+-	/* No i2c support prior to relocation */
+-	if (!(gd->flags & GD_FLG_RELOC))
+-		return;
+-
+-	/* This will override the speed selected in the fdt for that port */
+-	debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr);
+-	i2c_set_bus_speed(speed);
+-}
+-
+ /* i2c write version without the register address */
+-static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
++static int i2c_write_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
+ 			  int len, bool end_with_repeated_start)
+ {
+ 	int rc;
+@@ -484,7 +389,7 @@
+ 	debug("\n");
+ 
+ 	/* Shift 7-bit address over for lower-level i2c functions */
+-	rc = tegra_i2c_write_data(bus, chip << 1, buffer, len,
++	rc = tegra_i2c_write_data(i2c_bus, chip << 1, buffer, len,
+ 				  end_with_repeated_start);
+ 	if (rc)
+ 		debug("i2c_write_data(): rc=%d\n", rc);
+@@ -493,14 +398,14 @@
+ }
+ 
+ /* i2c read version without the register address */
+-static int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
+-				int len)
++static int i2c_read_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
++			 int len)
+ {
+ 	int rc;
+ 
+ 	debug("inside i2c_read_data():\n");
+ 	/* Shift 7-bit address over for lower-level i2c functions */
+-	rc = tegra_i2c_read_data(bus, chip << 1, buffer, len);
++	rc = tegra_i2c_read_data(i2c_bus, chip << 1, buffer, len);
+ 	if (rc) {
+ 		debug("i2c_read_data(): rc=%d\n", rc);
+ 		return rc;
+@@ -516,132 +421,99 @@
+ }
+ 
+ /* Probe to see if a chip is present. */
+-static int tegra_i2c_probe(struct i2c_adapter *adap, uchar chip)
++static int tegra_i2c_probe_chip(struct udevice *bus, uint chip_addr,
++				uint chip_flags)
+ {
+-	struct i2c_bus *bus;
++	struct i2c_bus *i2c_bus = dev_get_priv(bus);
+ 	int rc;
+-	uchar reg;
++	u8 reg;
+ 
+-	debug("i2c_probe: addr=0x%x\n", chip);
+-	bus = tegra_i2c_get_bus(adap);
+-	if (!bus)
+-		return 1;
+-	reg = 0;
+-	rc = i2c_write_data(bus, chip, &reg, 1, false);
+-	if (rc) {
+-		debug("Error probing 0x%x.\n", chip);
+-		return 1;
+-	}
+-	return 0;
++	/* Shift 7-bit address over for lower-level i2c functions */
++	rc = tegra_i2c_write_data(i2c_bus, chip_addr << 1, &reg, sizeof(reg),
++				  false);
++
++	return rc;
+ }
+ 
+-static int i2c_addr_ok(const uint addr, const int alen)
++static int tegra_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
++			  int nmsgs)
+ {
+-	/* We support 7 or 10 bit addresses, so one or two bytes each */
+-	return alen == 1 || alen == 2;
+-}
++	struct i2c_bus *i2c_bus = dev_get_priv(bus);
++	int ret;
+ 
+-/* Read bytes */
+-static int tegra_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+-			int alen, uchar *buffer, int len)
+-{
+-	struct i2c_bus *bus;
+-	uint offset;
+-	int i;
+-
+-	debug("i2c_read: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n",
+-	      chip, addr, alen, len);
+-	bus = tegra_i2c_get_bus(adap);
+-	if (!bus)
+-		return 1;
+-	if (!i2c_addr_ok(addr, alen)) {
+-		debug("i2c_read: Bad address %x.%d.\n", addr, alen);
+-		return 1;
+-	}
+-	for (offset = 0; offset < len; offset++) {
+-		if (alen) {
+-			uchar data[alen];
+-			for (i = 0; i < alen; i++) {
+-				data[alen - i - 1] =
+-					(addr + offset) >> (8 * i);
+-			}
+-			if (i2c_write_data(bus, chip, data, alen, true)) {
+-				debug("i2c_read: error sending (0x%x)\n",
+-					addr);
+-				return 1;
+-			}
++	debug("i2c_xfer: %d messages\n", nmsgs);
++	for (; nmsgs > 0; nmsgs--, msg++) {
++		bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);
++
++		debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
++		if (msg->flags & I2C_M_RD) {
++			ret = i2c_read_data(i2c_bus, msg->addr, msg->buf,
++					    msg->len);
++		} else {
++			ret = i2c_write_data(i2c_bus, msg->addr, msg->buf,
++					     msg->len, next_is_read);
+ 		}
+-		if (i2c_read_data(bus, chip, buffer + offset, 1)) {
+-			debug("i2c_read: error reading (0x%x)\n", addr);
+-			return 1;
++		if (ret) {
++			debug("i2c_write: error sending\n");
++			return -EREMOTEIO;
+ 		}
+ 	}
+ 
+ 	return 0;
+ }
+ 
+-/* Write bytes */
+-static int tegra_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+-			int alen, uchar *buffer, int len)
+-{
+-	struct i2c_bus *bus;
+-	uint offset;
+-	int i;
+-
+-	debug("i2c_write: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n",
+-	      chip, addr, alen, len);
+-	bus = tegra_i2c_get_bus(adap);
+-	if (!bus)
+-		return 1;
+-	if (!i2c_addr_ok(addr, alen)) {
+-		debug("i2c_write: Bad address %x.%d.\n", addr, alen);
+-		return 1;
+-	}
+-	for (offset = 0; offset < len; offset++) {
+-		uchar data[alen + 1];
+-		for (i = 0; i < alen; i++)
+-			data[alen - i - 1] = (addr + offset) >> (8 * i);
+-		data[alen] = buffer[offset];
+-		if (i2c_write_data(bus, chip, data, alen + 1, false)) {
+-			debug("i2c_write: error sending (0x%x)\n", addr);
+-			return 1;
++int tegra_i2c_get_dvc_bus(struct udevice **busp)
++{
++	struct udevice *bus;
++
++	for (uclass_first_device(UCLASS_I2C, &bus);
++	     bus;
++	     uclass_next_device(&bus)) {
++		if (dev_get_of_data(bus) == TYPE_DVC) {
++			*busp = bus;
++			return 0;
+ 		}
+ 	}
+ 
+-	return 0;
++	return -ENODEV;
+ }
+ 
+-int tegra_i2c_get_dvc_bus_num(void)
+-{
+-	int i;
++static const struct dm_i2c_ops tegra_i2c_ops = {
++	.xfer		= tegra_i2c_xfer,
++	.probe_chip	= tegra_i2c_probe_chip,
++	.set_bus_speed	= tegra_i2c_set_bus_speed,
++};
+ 
+-	for (i = 0; i < TEGRA_I2C_NUM_CONTROLLERS; i++) {
+-		struct i2c_bus *bus = &i2c_controllers[i];
++static int tegra_i2c_child_pre_probe(struct udevice *dev)
++{
++	struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev);
+ 
+-		if (bus->inited && bus->is_dvc)
+-			return i;
+-	}
++	if (dev->of_offset == -1)
++		return 0;
++	return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset,
++					   i2c_chip);
++}
+ 
+-	return -1;
++static int tegra_i2c_ofdata_to_platdata(struct udevice *dev)
++{
++	return 0;
+ }
+ 
+-/*
+- * Register soft i2c adapters
+- */
+-U_BOOT_I2C_ADAP_COMPLETE(tegra0, tegra_i2c_init, tegra_i2c_probe,
+-			 tegra_i2c_read, tegra_i2c_write,
+-			 tegra_i2c_set_bus_speed, 100000, 0, 0)
+-U_BOOT_I2C_ADAP_COMPLETE(tegra1, tegra_i2c_init, tegra_i2c_probe,
+-			 tegra_i2c_read, tegra_i2c_write,
+-			 tegra_i2c_set_bus_speed, 100000, 0, 1)
+-U_BOOT_I2C_ADAP_COMPLETE(tegra2, tegra_i2c_init, tegra_i2c_probe,
+-			 tegra_i2c_read, tegra_i2c_write,
+-			 tegra_i2c_set_bus_speed, 100000, 0, 2)
+-U_BOOT_I2C_ADAP_COMPLETE(tegra3, tegra_i2c_init, tegra_i2c_probe,
+-			 tegra_i2c_read, tegra_i2c_write,
+-			 tegra_i2c_set_bus_speed, 100000, 0, 3)
+-#if TEGRA_I2C_NUM_CONTROLLERS > 4
+-U_BOOT_I2C_ADAP_COMPLETE(tegra4, tegra_i2c_init, tegra_i2c_probe,
+-			 tegra_i2c_read, tegra_i2c_write,
+-			 tegra_i2c_set_bus_speed, 100000, 0, 4)
+-#endif
++static const struct udevice_id tegra_i2c_ids[] = {
++	{ .compatible = "nvidia,tegra114-i2c", .data = TYPE_114 },
++	{ .compatible = "nvidia,tegra20-i2c", .data = TYPE_STD },
++	{ .compatible = "nvidia,tegra20-i2c-dvc", .data = TYPE_DVC },
++	{ }
++};
++
++U_BOOT_DRIVER(i2c_tegra) = {
++	.name	= "i2c_tegra",
++	.id	= UCLASS_I2C,
++	.of_match = tegra_i2c_ids,
++	.ofdata_to_platdata = tegra_i2c_ofdata_to_platdata,
++	.probe	= tegra_i2c_probe,
++	.per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
++	.child_pre_probe = tegra_i2c_child_pre_probe,
++	.priv_auto_alloc_size = sizeof(struct i2c_bus),
++	.ops	= &tegra_i2c_ops,
++};
+diff -ruN u-boot-2015.01-rc3/drivers/misc/i2c_eeprom.c u-boot/drivers/misc/i2c_eeprom.c
+--- u-boot-2015.01-rc3/drivers/misc/i2c_eeprom.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/misc/i2c_eeprom.c	2015-01-01 17:34:32.649496760 +0100
+@@ -0,0 +1,51 @@
++/*
++ * Copyright (c) 2014 Google, Inc
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <i2c.h>
++#include <i2c_eeprom.h>
++
++static int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf,
++			   int size)
++{
++	return -ENODEV;
++}
++
++static int i2c_eeprom_write(struct udevice *dev, int offset,
++			    const uint8_t *buf, int size)
++{
++	return -ENODEV;
++}
++
++struct i2c_eeprom_ops i2c_eeprom_std_ops = {
++	.read	= i2c_eeprom_read,
++	.write	= i2c_eeprom_write,
++};
++
++int i2c_eeprom_std_probe(struct udevice *dev)
++{
++	return 0;
++}
++
++static const struct udevice_id i2c_eeprom_std_ids[] = {
++	{ .compatible = "i2c-eeprom" },
++	{ }
++};
++
++U_BOOT_DRIVER(i2c_eeprom_std) = {
++	.name		= "i2c_eeprom",
++	.id		= UCLASS_I2C_EEPROM,
++	.of_match	= i2c_eeprom_std_ids,
++	.probe		= i2c_eeprom_std_probe,
++	.priv_auto_alloc_size = sizeof(struct i2c_eeprom),
++	.ops		= &i2c_eeprom_std_ops,
++};
++
++UCLASS_DRIVER(i2c_eeprom) = {
++	.id		= UCLASS_I2C_EEPROM,
++	.name		= "i2c_eeprom",
++};
+diff -ruN u-boot-2015.01-rc3/drivers/misc/i2c_eeprom_emul.c u-boot/drivers/misc/i2c_eeprom_emul.c
+--- u-boot-2015.01-rc3/drivers/misc/i2c_eeprom_emul.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/misc/i2c_eeprom_emul.c	2015-01-01 17:34:32.649496760 +0100
+@@ -0,0 +1,168 @@
++/*
++ * Simulate an I2C eeprom
++ *
++ * Copyright (c) 2014 Google, Inc
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <fdtdec.h>
++#include <i2c.h>
++#include <malloc.h>
++#include <asm/test.h>
++
++#ifdef DEBUG
++#define debug_buffer print_buffer
++#else
++#define debug_buffer(x, ...)
++#endif
++
++DECLARE_GLOBAL_DATA_PTR;
++
++struct sandbox_i2c_flash_plat_data {
++	enum sandbox_i2c_eeprom_test_mode test_mode;
++	const char *filename;
++	int offset_len;		/* Length of an offset in bytes */
++	int size;		/* Size of data buffer */
++};
++
++struct sandbox_i2c_flash {
++	uint8_t *data;
++};
++
++void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev,
++				      enum sandbox_i2c_eeprom_test_mode mode)
++{
++	struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
++
++	plat->test_mode = mode;
++}
++
++void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len)
++{
++	struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
++
++	plat->offset_len = offset_len;
++}
++
++static int sandbox_i2c_eeprom_xfer(struct udevice *emul, struct i2c_msg *msg,
++				  int nmsgs)
++{
++	struct sandbox_i2c_flash *priv = dev_get_priv(emul);
++	uint offset = 0;
++
++	debug("\n%s\n", __func__);
++	debug_buffer(0, priv->data, 1, 16, 0);
++	for (; nmsgs > 0; nmsgs--, msg++) {
++		struct sandbox_i2c_flash_plat_data *plat =
++				dev_get_platdata(emul);
++		int len;
++		u8 *ptr;
++
++		if (!plat->size)
++			return -ENODEV;
++		if (msg->addr + msg->len > plat->size) {
++			debug("%s: Address %x, len %x is outside range 0..%x\n",
++			      __func__, msg->addr, msg->len, plat->size);
++			return -EINVAL;
++		}
++		len = msg->len;
++		debug("   %s: msg->len=%d",
++		      msg->flags & I2C_M_RD ? "read" : "write",
++		      msg->len);
++		if (msg->flags & I2C_M_RD) {
++			if (plat->test_mode == SIE_TEST_MODE_SINGLE_BYTE)
++				len = 1;
++			debug(", offset %x, len %x: ", offset, len);
++			memcpy(msg->buf, priv->data + offset, len);
++			memset(msg->buf + len, '\xff', msg->len - len);
++			debug_buffer(0, msg->buf, 1, msg->len, 0);
++		} else if (len >= plat->offset_len) {
++			int i;
++
++			ptr = msg->buf;
++			for (i = 0; i < plat->offset_len; i++, len--)
++				offset = (offset << 8) | *ptr++;
++			debug(", set offset %x: ", offset);
++			debug_buffer(0, msg->buf, 1, msg->len, 0);
++			if (plat->test_mode == SIE_TEST_MODE_SINGLE_BYTE)
++				len = min(len, 1);
++
++			/* For testing, map offsets into our limited buffer */
++			for (i = 24; i > 0; i -= 8) {
++				if (offset > (1 << i)) {
++					offset = (offset >> i) |
++						(offset & ((1 << i) - 1));
++					offset += i;
++				}
++			}
++			memcpy(priv->data + offset, ptr, len);
++		}
++	}
++	debug_buffer(0, priv->data, 1, 16, 0);
++
++	return 0;
++}
++
++struct dm_i2c_ops sandbox_i2c_emul_ops = {
++	.xfer = sandbox_i2c_eeprom_xfer,
++};
++
++static int sandbox_i2c_eeprom_ofdata_to_platdata(struct udevice *dev)
++{
++	struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
++
++	plat->size = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
++				    "sandbox,size", 32);
++	plat->filename = fdt_getprop(gd->fdt_blob, dev->of_offset,
++				     "sandbox,filename", NULL);
++	if (!plat->filename) {
++		debug("%s: No filename for device '%s'\n", __func__,
++		      dev->name);
++		return -EINVAL;
++	}
++	plat->test_mode = SIE_TEST_MODE_NONE;
++	plat->offset_len = 1;
++
++	return 0;
++}
++
++static int sandbox_i2c_eeprom_probe(struct udevice *dev)
++{
++	struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
++	struct sandbox_i2c_flash *priv = dev_get_priv(dev);
++
++	priv->data = calloc(1, plat->size);
++	if (!priv->data)
++		return -ENOMEM;
++
++	return 0;
++}
++
++static int sandbox_i2c_eeprom_remove(struct udevice *dev)
++{
++	struct sandbox_i2c_flash *priv = dev_get_priv(dev);
++
++	free(priv->data);
++
++	return 0;
++}
++
++static const struct udevice_id sandbox_i2c_ids[] = {
++	{ .compatible = "sandbox,i2c-eeprom" },
++	{ }
++};
++
++U_BOOT_DRIVER(sandbox_i2c_emul) = {
++	.name		= "sandbox_i2c_eeprom_emul",
++	.id		= UCLASS_I2C_EMUL,
++	.of_match	= sandbox_i2c_ids,
++	.ofdata_to_platdata = sandbox_i2c_eeprom_ofdata_to_platdata,
++	.probe		= sandbox_i2c_eeprom_probe,
++	.remove		= sandbox_i2c_eeprom_remove,
++	.priv_auto_alloc_size = sizeof(struct sandbox_i2c_flash),
++	.platdata_auto_alloc_size = sizeof(struct sandbox_i2c_flash_plat_data),
++	.ops		= &sandbox_i2c_emul_ops,
++};
+diff -ruN u-boot-2015.01-rc3/drivers/misc/Makefile u-boot/drivers/misc/Makefile
+--- u-boot-2015.01-rc3/drivers/misc/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/misc/Makefile	2015-01-01 17:34:32.649496760 +0100
+@@ -15,11 +15,16 @@
+ obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
+ obj-$(CONFIG_FSL_IIM) += fsl_iim.o
+ obj-$(CONFIG_GPIO_LED) += gpio_led.o
++obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o
+ obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
+ obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
+ obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
+ obj-$(CONFIG_NS87308) += ns87308.o
+ obj-$(CONFIG_PDSP188x) += pdsp188x.o
++ifdef CONFIG_DM_I2C
++obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o
++endif
++obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o
+ obj-$(CONFIG_STATUS_LED) += status_led.o
+ obj-$(CONFIG_TWL4030_LED) += twl4030_led.o
+ obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
+diff -ruN u-boot-2015.01-rc3/drivers/misc/mxc_ocotp.c u-boot/drivers/misc/mxc_ocotp.c
+--- u-boot-2015.01-rc3/drivers/misc/mxc_ocotp.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/misc/mxc_ocotp.c	2015-01-01 17:34:32.649496760 +0100
+@@ -81,8 +81,6 @@
+ 	err = !!(readl(&regs->ctrl) & BM_CTRL_ERROR);
+ 	clear_error(regs);
+ 
+-	enable_ocotp_clk(0);
+-
+ 	if (err) {
+ 		printf("mxc_ocotp %s(): Access protect error\n", caller);
+ 		return -EIO;
+diff -ruN u-boot-2015.01-rc3/drivers/misc/mxs_ocotp.c u-boot/drivers/misc/mxs_ocotp.c
+--- u-boot-2015.01-rc3/drivers/misc/mxs_ocotp.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/misc/mxs_ocotp.c	2015-01-01 17:34:32.649496760 +0100
+@@ -187,6 +187,8 @@
+ 	uint32_t hclk_val, vddio_val;
+ 	int ret;
+ 
++	mxs_ocotp_clear_error();
++
+ 	/* Make sure the banks are closed for reading. */
+ 	ret = mxs_ocotp_read_bank_open(0);
+ 	if (ret) {
+@@ -221,13 +223,17 @@
+ 		goto fail;
+ 	}
+ 
++	/* Check for errors */
++	if (readl(&ocotp_regs->hw_ocotp_ctrl) & OCOTP_CTRL_ERROR) {
++		puts("Failed writing fuses!\n");
++		ret = -EPERM;
++		goto fail;
++	}
++
+ fail:
+ 	mxs_ocotp_scale_vddio(0, &vddio_val);
+-	ret = mxs_ocotp_scale_hclk(0, &hclk_val);
+-	if (ret) {
++	if (mxs_ocotp_scale_hclk(0, &hclk_val))
+ 		puts("Failed scaling up the HCLK!\n");
+-		return ret;
+-	}
+ 
+ 	return ret;
+ }
+diff -ruN u-boot-2015.01-rc3/drivers/misc/smsc_lpc47m.c u-boot/drivers/misc/smsc_lpc47m.c
+--- u-boot-2015.01-rc3/drivers/misc/smsc_lpc47m.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/misc/smsc_lpc47m.c	2015-01-01 17:34:32.649496760 +0100
+@@ -0,0 +1,33 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/pnp_def.h>
++
++static void pnp_enter_conf_state(u16 dev)
++{
++	u16 port = dev >> 8;
++
++	outb(0x55, port);
++}
++
++static void pnp_exit_conf_state(u16 dev)
++{
++	u16 port = dev >> 8;
++
++	outb(0xaa, port);
++}
++
++void lpc47m_enable_serial(u16 dev, u16 iobase)
++{
++	pnp_enter_conf_state(dev);
++	pnp_set_logical_device(dev);
++	pnp_set_enable(dev, 0);
++	pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
++	pnp_set_enable(dev, 1);
++	pnp_exit_conf_state(dev);
++}
+diff -ruN u-boot-2015.01-rc3/drivers/mmc/dw_mmc.c u-boot/drivers/mmc/dw_mmc.c
+--- u-boot-2015.01-rc3/drivers/mmc/dw_mmc.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/mmc/dw_mmc.c	2015-01-01 17:34:32.653496694 +0100
+@@ -318,7 +318,7 @@
+ 	dwmci_writel(host, DWMCI_CTYPE, ctype);
+ 
+ 	regs = dwmci_readl(host, DWMCI_UHS_REG);
+-	if (mmc->card_caps & MMC_MODE_DDR_52MHz)
++	if (mmc->ddr_mode)
+ 		regs |= DWMCI_DDR_MODE;
+ 	else
+ 		regs &= DWMCI_DDR_MODE;
+diff -ruN u-boot-2015.01-rc3/drivers/mmc/exynos_dw_mmc.c u-boot/drivers/mmc/exynos_dw_mmc.c
+--- u-boot-2015.01-rc3/drivers/mmc/exynos_dw_mmc.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/mmc/exynos_dw_mmc.c	2015-01-01 17:34:32.653496694 +0100
+@@ -101,7 +101,7 @@
+ 	host->get_mmc_clk = exynos_dwmci_get_clk;
+ 	/* Add the mmc channel to be registered with mmc core */
+ 	if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
+-		debug("dwmmc%d registration failed\n", index);
++		printf("DWMMC%d registration failed\n", index);
+ 		return -1;
+ 	}
+ 	return 0;
+@@ -146,7 +146,7 @@
+ 	flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
+ 	err = exynos_pinmux_config(host->dev_id, flag);
+ 	if (err) {
+-		debug("DWMMC not configure\n");
++		printf("DWMMC%d not configure\n", index);
+ 		return err;
+ 	}
+ 
+@@ -162,21 +162,22 @@
+ 	/* Extract device id for each mmc channel */
+ 	host->dev_id = pinmux_decode_periph_id(blob, node);
+ 
++	host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
++	if (host->dev_index == host->dev_id)
++		host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
++
++
+ 	/* Get the bus width from the device node */
+ 	host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+ 	if (host->buswidth <= 0) {
+-		debug("DWMMC: Can't get bus-width\n");
++		printf("DWMMC%d: Can't get bus-width\n", host->dev_index);
+ 		return -EINVAL;
+ 	}
+ 
+-	host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
+-	if (host->dev_index == host->dev_id)
+-		host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
+-
+ 	/* Set the base address from the device node */
+ 	base = fdtdec_get_addr(blob, node, "reg");
+ 	if (!base) {
+-		debug("DWMMC: Can't get base address\n");
++		printf("DWMMC%d: Can't get base address\n", host->dev_index);
+ 		return -EINVAL;
+ 	}
+ 	host->ioaddr = (void *)base;
+@@ -184,7 +185,8 @@
+ 	/* Extract the timing info from the node */
+ 	err =  fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3);
+ 	if (err) {
+-		debug("Can't get sdr-timings for devider\n");
++		printf("DWMMC%d: Can't get sdr-timings for devider\n",
++				host->dev_index);
+ 		return -EINVAL;
+ 	}
+ 
+@@ -214,7 +216,7 @@
+ 		host = &dwmci_host[i];
+ 		err = exynos_dwmci_get_config(blob, node, host);
+ 		if (err) {
+-			debug("%s: failed to decode dev %d\n", __func__, i);
++			printf("%s: failed to decode dev %d\n", __func__, i);
+ 			return err;
+ 		}
+ 
+diff -ruN u-boot-2015.01-rc3/drivers/mmc/mmc.c u-boot/drivers/mmc/mmc.c
+--- u-boot-2015.01-rc3/drivers/mmc/mmc.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/mmc/mmc.c	2015-01-01 17:34:32.653496694 +0100
+@@ -159,7 +159,7 @@
+ {
+ 	struct mmc_cmd cmd;
+ 
+-	if (mmc->card_caps & MMC_MODE_DDR_52MHz)
++	if (mmc->ddr_mode)
+ 		return 0;
+ 
+ 	cmd.cmdidx = MMC_CMD_SET_BLOCKLEN;
+@@ -486,7 +486,7 @@
+ 	char cardtype;
+ 	int err;
+ 
+-	mmc->card_caps = 0;
++	mmc->card_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
+ 
+ 	if (mmc_host_is_spi(mmc))
+ 		return 0;
+@@ -519,7 +519,7 @@
+ 
+ 	/* High Speed is set, there are two types: 52MHz and 26MHz */
+ 	if (cardtype & EXT_CSD_CARD_TYPE_52) {
+-		if (cardtype & EXT_CSD_CARD_TYPE_DDR_52)
++		if (cardtype & EXT_CSD_CARD_TYPE_DDR_1_8V)
+ 			mmc->card_caps |= MMC_MODE_DDR_52MHz;
+ 		mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+ 	} else {
+@@ -1001,6 +1001,9 @@
+ 		case 6:
+ 			mmc->version = MMC_VERSION_4_5;
+ 			break;
++		case 7:
++			mmc->version = MMC_VERSION_5_0;
++			break;
+ 		}
+ 
+ 		/*
+@@ -1022,6 +1025,21 @@
+ 			mmc->erase_grp_size =
+ 				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] *
+ 					MMC_MAX_BLOCK_LEN * 1024;
++			/*
++			 * if high capacity and partition setting completed
++			 * SEC_COUNT is valid even if it is smaller than 2 GiB
++			 * JEDEC Standard JESD84-B45, 6.2.4
++			 */
++			if (mmc->high_capacity &&
++			    (ext_csd[EXT_CSD_PARTITION_SETTING] &
++			     EXT_CSD_PARTITION_SETTING_COMPLETED)) {
++				capacity = (ext_csd[EXT_CSD_SEC_CNT]) |
++					(ext_csd[EXT_CSD_SEC_CNT + 1] << 8) |
++					(ext_csd[EXT_CSD_SEC_CNT + 2] << 16) |
++					(ext_csd[EXT_CSD_SEC_CNT + 3] << 24);
++				capacity *= MMC_MAX_BLOCK_LEN;
++				mmc->capacity_user = capacity;
++			}
+ 		} else {
+ 			/* Calculate the group size from the csd value. */
+ 			int erase_gsz, erase_gmul;
+@@ -1103,8 +1121,10 @@
+ 
+ 		/* An array to map CSD bus widths to host cap bits */
+ 		static unsigned ext_to_hostcaps[] = {
+-			[EXT_CSD_DDR_BUS_WIDTH_4] = MMC_MODE_DDR_52MHz,
+-			[EXT_CSD_DDR_BUS_WIDTH_8] = MMC_MODE_DDR_52MHz,
++			[EXT_CSD_DDR_BUS_WIDTH_4] =
++				MMC_MODE_DDR_52MHz | MMC_MODE_4BIT,
++			[EXT_CSD_DDR_BUS_WIDTH_8] =
++				MMC_MODE_DDR_52MHz | MMC_MODE_8BIT,
+ 			[EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT,
+ 			[EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT,
+ 		};
+@@ -1116,13 +1136,13 @@
+ 
+ 		for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) {
+ 			unsigned int extw = ext_csd_bits[idx];
++			unsigned int caps = ext_to_hostcaps[extw];
+ 
+ 			/*
+-			 * Check to make sure the controller supports
+-			 * this bus width, if it's more than 1
++			 * Check to make sure the card and controller support
++			 * these capabilities
+ 			 */
+-			if (extw != EXT_CSD_BUS_WIDTH_1 &&
+-					!(mmc->cfg->host_caps & ext_to_hostcaps[extw]))
++			if ((mmc->card_caps & caps) != caps)
+ 				continue;
+ 
+ 			err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+@@ -1131,26 +1151,33 @@
+ 			if (err)
+ 				continue;
+ 
++			mmc->ddr_mode = (caps & MMC_MODE_DDR_52MHz) ? 1 : 0;
+ 			mmc_set_bus_width(mmc, widths[idx]);
+ 
+ 			err = mmc_send_ext_csd(mmc, test_csd);
+-			/* Only compare read only fields */
+-			if (!err && ext_csd[EXT_CSD_PARTITIONING_SUPPORT] \
+-				    == test_csd[EXT_CSD_PARTITIONING_SUPPORT]
+-				 && ext_csd[EXT_CSD_HC_WP_GRP_SIZE] \
+-				    == test_csd[EXT_CSD_HC_WP_GRP_SIZE] \
+-				 && ext_csd[EXT_CSD_REV] \
+-				    == test_csd[EXT_CSD_REV]
+-				 && ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] \
+-				    == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
+-				 && memcmp(&ext_csd[EXT_CSD_SEC_CNT], \
+-					&test_csd[EXT_CSD_SEC_CNT], 4) == 0) {
+ 
+-				mmc->card_caps |= ext_to_hostcaps[extw];
++			if (err)
++				continue;
++
++			/* Only compare read only fields */
++			if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT]
++				== test_csd[EXT_CSD_PARTITIONING_SUPPORT] &&
++			    ext_csd[EXT_CSD_HC_WP_GRP_SIZE]
++				== test_csd[EXT_CSD_HC_WP_GRP_SIZE] &&
++			    ext_csd[EXT_CSD_REV]
++				== test_csd[EXT_CSD_REV] &&
++			    ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
++				== test_csd[EXT_CSD_HC_ERASE_GRP_SIZE] &&
++			    memcmp(&ext_csd[EXT_CSD_SEC_CNT],
++				   &test_csd[EXT_CSD_SEC_CNT], 4) == 0)
+ 				break;
+-			}
++			else
++				err = SWITCH_ERR;
+ 		}
+ 
++		if (err)
++			return err;
++
+ 		if (mmc->card_caps & MMC_MODE_HS) {
+ 			if (mmc->card_caps & MMC_MODE_HS_52MHz)
+ 				mmc->tran_speed = 52000000;
+@@ -1161,6 +1188,12 @@
+ 
+ 	mmc_set_clock(mmc, mmc->tran_speed);
+ 
++	/* Fix the block length for DDR mode */
++	if (mmc->ddr_mode) {
++		mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
++		mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
++	}
++
+ 	/* fill in device description */
+ 	mmc->block_dev.lun = 0;
+ 	mmc->block_dev.type = 0;
+@@ -1306,6 +1339,7 @@
+ 	if (err)
+ 		return err;
+ 
++	mmc->ddr_mode = 0;
+ 	mmc_set_bus_width(mmc, 1);
+ 	mmc_set_clock(mmc, 1);
+ 
+@@ -1408,8 +1442,11 @@
+ 
+ 		printf("%s: %d", m->cfg->name, m->block_dev.dev);
+ 
+-		if (entry->next != &mmc_devices)
+-			printf("%c ", separator);
++		if (entry->next != &mmc_devices) {
++			printf("%c", separator);
++			if (separator != '\n')
++				puts (" ");
++		}
+ 	}
+ 
+ 	printf("\n");
+diff -ruN u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_nand.c u-boot/drivers/mtd/nand/fsl_ifc_nand.c
+--- u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_nand.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/mtd/nand/fsl_ifc_nand.c	2015-01-01 17:34:32.657496629 +0100
+@@ -292,7 +292,7 @@
+ 	struct fsl_ifc *ifc = ctrl->regs;
+ 	u32 timeo = (CONFIG_SYS_HZ * 10) / 1000;
+ 	u32 time_start;
+-	u32 eccstat[4];
++	u32 eccstat[4] = {0};
+ 	int i;
+ 
+ 	/* set the chip select for NAND Transaction */
+diff -ruN u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_spl.c u-boot/drivers/mtd/nand/fsl_ifc_spl.c
+--- u-boot-2015.01-rc3/drivers/mtd/nand/fsl_ifc_spl.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/mtd/nand/fsl_ifc_spl.c	2015-01-01 17:34:32.657496629 +0100
+@@ -254,3 +254,13 @@
+ 	uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
+ 	uboot();
+ }
++
++#ifndef CONFIG_SPL_NAND_INIT
++void nand_init(void)
++{
++}
++
++void nand_deselect(void)
++{
++}
++#endif
+diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_internal.h u-boot/drivers/mtd/spi/sf_internal.h
+--- u-boot-2015.01-rc3/drivers/mtd/spi/sf_internal.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/mtd/spi/sf_internal.h	2015-01-01 17:34:32.665496498 +0100
+@@ -23,13 +23,16 @@
+ /* Enum list - Full read commands */
+ enum spi_read_cmds {
+ 	ARRAY_SLOW		= 1 << 0,
+-	DUAL_OUTPUT_FAST	= 1 << 1,
+-	DUAL_IO_FAST		= 1 << 2,
+-	QUAD_OUTPUT_FAST	= 1 << 3,
+-	QUAD_IO_FAST		= 1 << 4,
++	ARRAY_FAST		= 1 << 1,
++	DUAL_OUTPUT_FAST	= 1 << 2,
++	DUAL_IO_FAST		= 1 << 3,
++	QUAD_OUTPUT_FAST	= 1 << 4,
++	QUAD_IO_FAST		= 1 << 5,
+ };
+ 
+-#define RD_EXTN	(ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
++/* Normal - Extended - Full command set */
++#define RD_NORM	(ARRAY_SLOW | ARRAY_FAST)
++#define RD_EXTN	(RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
+ #define RD_FULL	(RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST)
+ 
+ /* sf param flags */
+@@ -37,9 +40,13 @@
+ 	SECT_4K		= 1 << 0,
+ 	SECT_32K	= 1 << 1,
+ 	E_FSR		= 1 << 2,
+-	WR_QPP		= 1 << 3,
++	SST_BP		= 1 << 3,
++	SST_WP		= 1 << 4,
++	WR_QPP		= 1 << 5,
+ };
+ 
++#define SST_WR		(SST_BP | SST_WP)
++
+ #define SPI_FLASH_3B_ADDR_LEN		3
+ #define SPI_FLASH_CMD_LEN		(1 + SPI_FLASH_3B_ADDR_LEN)
+ #define SPI_FLASH_16MB_BOUN		0x1000000
+@@ -101,12 +108,13 @@
+ 
+ /* SST specific */
+ #ifdef CONFIG_SPI_FLASH_SST
+-# define SST_WP		0x01	/* Supports AAI word program */
+ # define CMD_SST_BP		0x02    /* Byte Program */
+ # define CMD_SST_AAI_WP	0xAD	/* Auto Address Incr Word Program */
+ 
+ int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
+ 		const void *buf);
++int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
++		const void *buf);
+ #endif
+ 
+ /**
+diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_ops.c u-boot/drivers/mtd/spi/sf_ops.c
+--- u-boot-2015.01-rc3/drivers/mtd/spi/sf_ops.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/mtd/spi/sf_ops.c	2015-01-01 17:34:32.665496498 +0100
+@@ -517,4 +517,35 @@
+ 	spi_release_bus(flash->spi);
+ 	return ret;
+ }
++
++int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
++		const void *buf)
++{
++	size_t actual;
++	int ret;
++
++	ret = spi_claim_bus(flash->spi);
++	if (ret) {
++		debug("SF: Unable to claim SPI bus\n");
++		return ret;
++	}
++
++	for (actual = 0; actual < len; actual++) {
++		ret = sst_byte_write(flash, offset, buf + actual);
++		if (ret) {
++			debug("SF: sst byte program failed\n");
++			break;
++		}
++		offset++;
++	}
++
++	if (!ret)
++		ret = spi_flash_cmd_write_disable(flash);
++
++	debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
++	      ret ? "failure" : "success", len, offset - actual);
++
++	spi_release_bus(flash->spi);
++	return ret;
++}
+ #endif
+diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_params.c u-boot/drivers/mtd/spi/sf_params.c
+--- u-boot-2015.01-rc3/drivers/mtd/spi/sf_params.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/mtd/spi/sf_params.c	2015-01-01 17:34:32.665496498 +0100
+@@ -15,42 +15,42 @@
+ /* SPI/QSPI flash device params structure */
+ const struct spi_flash_params spi_flash_params_table[] = {
+ #ifdef CONFIG_SPI_FLASH_ATMEL		/* ATMEL */
+-	{"AT45DB011D",	   0x1f2200, 0x0,	64 * 1024,     4,	0,		    SECT_4K},
+-	{"AT45DB021D",	   0x1f2300, 0x0,	64 * 1024,     8,	0,		    SECT_4K},
+-	{"AT45DB041D",	   0x1f2400, 0x0,	64 * 1024,     8,	0,		    SECT_4K},
+-	{"AT45DB081D",	   0x1f2500, 0x0,	64 * 1024,    16,	0,		    SECT_4K},
+-	{"AT45DB161D",	   0x1f2600, 0x0,	64 * 1024,    32,	0,		    SECT_4K},
+-	{"AT45DB321D",	   0x1f2700, 0x0,	64 * 1024,    64,	0,		    SECT_4K},
+-	{"AT45DB641D",	   0x1f2800, 0x0,	64 * 1024,   128,	0,		    SECT_4K},
+-	{"AT25DF321",      0x1f4701, 0x0,	64 * 1024,    64,	0,		    SECT_4K},
++	{"AT45DB011D",	   0x1f2200, 0x0,	64 * 1024,     4, RD_NORM,		    SECT_4K},
++	{"AT45DB021D",	   0x1f2300, 0x0,	64 * 1024,     8, RD_NORM,		    SECT_4K},
++	{"AT45DB041D",	   0x1f2400, 0x0,	64 * 1024,     8, RD_NORM,		    SECT_4K},
++	{"AT45DB081D",	   0x1f2500, 0x0,	64 * 1024,    16, RD_NORM,		    SECT_4K},
++	{"AT45DB161D",	   0x1f2600, 0x0,	64 * 1024,    32, RD_NORM,		    SECT_4K},
++	{"AT45DB321D",	   0x1f2700, 0x0,	64 * 1024,    64, RD_NORM,		    SECT_4K},
++	{"AT45DB641D",	   0x1f2800, 0x0,	64 * 1024,   128, RD_NORM,		    SECT_4K},
++	{"AT25DF321",      0x1f4701, 0x0,	64 * 1024,    64, RD_NORM,		    SECT_4K},
+ #endif
+ #ifdef CONFIG_SPI_FLASH_EON		/* EON */
+-	{"EN25Q32B",	   0x1c3016, 0x0,	64 * 1024,    64,	0,			  0},
+-	{"EN25Q64",	   0x1c3017, 0x0,	64 * 1024,   128,	0,		    SECT_4K},
+-	{"EN25Q128B",	   0x1c3018, 0x0,       64 * 1024,   256,	0,			  0},
+-	{"EN25S64",	   0x1c3817, 0x0,	64 * 1024,   128,	0,			  0},
++	{"EN25Q32B",	   0x1c3016, 0x0,	64 * 1024,    64, RD_NORM,			  0},
++	{"EN25Q64",	   0x1c3017, 0x0,	64 * 1024,   128, RD_NORM,		    SECT_4K},
++	{"EN25Q128B",	   0x1c3018, 0x0,       64 * 1024,   256, RD_NORM,			  0},
++	{"EN25S64",	   0x1c3817, 0x0,	64 * 1024,   128, RD_NORM,			  0},
+ #endif
+ #ifdef CONFIG_SPI_FLASH_GIGADEVICE	/* GIGADEVICE */
+-	{"GD25Q64B",	   0xc84017, 0x0,	64 * 1024,   128,	0,		    SECT_4K},
+-	{"GD25LQ32",	   0xc86016, 0x0,	64 * 1024,    64,	0,		    SECT_4K},
++	{"GD25Q64B",	   0xc84017, 0x0,	64 * 1024,   128, RD_NORM,		    SECT_4K},
++	{"GD25LQ32",	   0xc86016, 0x0,	64 * 1024,    64, RD_NORM,		    SECT_4K},
+ #endif
+ #ifdef CONFIG_SPI_FLASH_MACRONIX	/* MACRONIX */
+-	{"MX25L2006E",	   0xc22012, 0x0,	64 * 1024,     4,	0,			  0},
+-	{"MX25L4005",	   0xc22013, 0x0,	64 * 1024,     8,	0,			  0},
+-	{"MX25L8005",	   0xc22014, 0x0,	64 * 1024,    16,	0,			  0},
+-	{"MX25L1605D",	   0xc22015, 0x0,	64 * 1024,    32,	0,			  0},
+-	{"MX25L3205D",	   0xc22016, 0x0,	64 * 1024,    64,	0,			  0},
+-	{"MX25L6405D",	   0xc22017, 0x0,	64 * 1024,   128,	0,			  0},
++	{"MX25L2006E",	   0xc22012, 0x0,	64 * 1024,     4, RD_NORM,			  0},
++	{"MX25L4005",	   0xc22013, 0x0,	64 * 1024,     8, RD_NORM,			  0},
++	{"MX25L8005",	   0xc22014, 0x0,	64 * 1024,    16, RD_NORM,			  0},
++	{"MX25L1605D",	   0xc22015, 0x0,	64 * 1024,    32, RD_NORM,			  0},
++	{"MX25L3205D",	   0xc22016, 0x0,	64 * 1024,    64, RD_NORM,			  0},
++	{"MX25L6405D",	   0xc22017, 0x0,	64 * 1024,   128, RD_NORM,			  0},
+ 	{"MX25L12805",	   0xc22018, 0x0,	64 * 1024,   256, RD_FULL,		     WR_QPP},
+ 	{"MX25L25635F",	   0xc22019, 0x0,	64 * 1024,   512, RD_FULL,		     WR_QPP},
+ 	{"MX25L51235F",	   0xc2201a, 0x0,	64 * 1024,  1024, RD_FULL,		     WR_QPP},
+ 	{"MX25L12855E",	   0xc22618, 0x0,	64 * 1024,   256, RD_FULL,		     WR_QPP},
+ #endif
+ #ifdef CONFIG_SPI_FLASH_SPANSION	/* SPANSION */
+-	{"S25FL008A",	   0x010213, 0x0,	64 * 1024,    16,	0,			  0},
+-	{"S25FL016A",	   0x010214, 0x0,	64 * 1024,    32,	0,			  0},
+-	{"S25FL032A",	   0x010215, 0x0,	64 * 1024,    64,	0,			  0},
+-	{"S25FL064A",	   0x010216, 0x0,	64 * 1024,   128,	0,			  0},
++	{"S25FL008A",	   0x010213, 0x0,	64 * 1024,    16, RD_NORM,			  0},
++	{"S25FL016A",	   0x010214, 0x0,	64 * 1024,    32, RD_NORM,			  0},
++	{"S25FL032A",	   0x010215, 0x0,	64 * 1024,    64, RD_NORM,			  0},
++	{"S25FL064A",	   0x010216, 0x0,	64 * 1024,   128, RD_NORM,			  0},
+ 	{"S25FL128P_256K", 0x012018, 0x0300,   256 * 1024,    64, RD_FULL,		     WR_QPP},
+ 	{"S25FL128P_64K",  0x012018, 0x0301,    64 * 1024,   256, RD_FULL,		     WR_QPP},
+ 	{"S25FL032P",	   0x010215, 0x4d00,    64 * 1024,    64, RD_FULL,		     WR_QPP},
+@@ -64,17 +64,17 @@
+ 	{"S25FL512S_512K", 0x010220, 0x4f00,   256 * 1024,   256, RD_FULL,		     WR_QPP},
+ #endif
+ #ifdef CONFIG_SPI_FLASH_STMICRO		/* STMICRO */
+-	{"M25P10",	   0x202011, 0x0,	32 * 1024,     4,	0,			  0},
+-	{"M25P20",	   0x202012, 0x0,       64 * 1024,     4,	0,			  0},
+-	{"M25P40",	   0x202013, 0x0,       64 * 1024,     8,	0,			  0},
+-	{"M25P80",	   0x202014, 0x0,       64 * 1024,    16,	0,			  0},
+-	{"M25P16",	   0x202015, 0x0,       64 * 1024,    32,	0,			  0},
+-	{"M25PE16",	   0x208015, 0x1000,    64 * 1024,    32,	0,			  0},
++	{"M25P10",	   0x202011, 0x0,	32 * 1024,     4, RD_NORM,			  0},
++	{"M25P20",	   0x202012, 0x0,       64 * 1024,     4, RD_NORM,			  0},
++	{"M25P40",	   0x202013, 0x0,       64 * 1024,     8, RD_NORM,			  0},
++	{"M25P80",	   0x202014, 0x0,       64 * 1024,    16, RD_NORM,			  0},
++	{"M25P16",	   0x202015, 0x0,       64 * 1024,    32, RD_NORM,			  0},
++	{"M25PE16",	   0x208015, 0x1000,    64 * 1024,    32, RD_NORM,			  0},
+ 	{"M25PX16",	   0x207115, 0x1000,    64 * 1024,    32, RD_EXTN,			  0},
+-	{"M25P32",	   0x202016, 0x0,       64 * 1024,    64,	0,			  0},
+-	{"M25P64",	   0x202017, 0x0,       64 * 1024,   128,	0,			  0},
+-	{"M25P128",	   0x202018, 0x0,      256 * 1024,    64,	0,			  0},
+-	{"M25PX64",	   0x207117, 0x0,       64 * 1024,   128,	0,		    SECT_4K},
++	{"M25P32",	   0x202016, 0x0,       64 * 1024,    64, RD_NORM,			  0},
++	{"M25P64",	   0x202017, 0x0,       64 * 1024,   128, RD_NORM,			  0},
++	{"M25P128",	   0x202018, 0x0,      256 * 1024,    64, RD_NORM,			  0},
++	{"M25PX64",	   0x207117, 0x0,       64 * 1024,   128, RD_NORM,		    SECT_4K},
+ 	{"N25Q32",	   0x20ba16, 0x0,       64 * 1024,    64, RD_FULL,	   WR_QPP | SECT_4K},
+ 	{"N25Q32A",	   0x20bb16, 0x0,       64 * 1024,    64, RD_FULL,	   WR_QPP | SECT_4K},
+ 	{"N25Q64",	   0x20ba17, 0x0,       64 * 1024,   128, RD_FULL,	   WR_QPP | SECT_4K},
+@@ -89,25 +89,25 @@
+ 	{"N25Q1024A",	   0x20bb21, 0x0,       64 * 1024,  2048, RD_FULL, WR_QPP | E_FSR | SECT_4K},
+ #endif
+ #ifdef CONFIG_SPI_FLASH_SST		/* SST */
+-	{"SST25VF040B",	   0xbf258d, 0x0,	64 * 1024,     8,	0,          SECT_4K | SST_WP},
+-	{"SST25VF080B",	   0xbf258e, 0x0,	64 * 1024,    16,	0,	    SECT_4K | SST_WP},
+-	{"SST25VF016B",	   0xbf2541, 0x0,	64 * 1024,    32,	0,	    SECT_4K | SST_WP},
+-	{"SST25VF032B",	   0xbf254a, 0x0,	64 * 1024,    64,	0,	    SECT_4K | SST_WP},
+-	{"SST25VF064C",	   0xbf254b, 0x0,	64 * 1024,   128,	0,		     SECT_4K},
+-	{"SST25WF512",	   0xbf2501, 0x0,	64 * 1024,     1,	0,	    SECT_4K | SST_WP},
+-	{"SST25WF010",	   0xbf2502, 0x0,	64 * 1024,     2,       0,          SECT_4K | SST_WP},
+-	{"SST25WF020",	   0xbf2503, 0x0,	64 * 1024,     4,       0,	    SECT_4K | SST_WP},
+-	{"SST25WF040",	   0xbf2504, 0x0,	64 * 1024,     8,       0,	    SECT_4K | SST_WP},
+-	{"SST25WF080",	   0xbf2505, 0x0,	64 * 1024,    16,       0,	    SECT_4K | SST_WP},
++	{"SST25VF040B",	   0xbf258d, 0x0,	64 * 1024,     8, RD_NORM,          SECT_4K | SST_WR},
++	{"SST25VF080B",	   0xbf258e, 0x0,	64 * 1024,    16, RD_NORM,	    SECT_4K | SST_WR},
++	{"SST25VF016B",	   0xbf2541, 0x0,	64 * 1024,    32, RD_NORM,	    SECT_4K | SST_WR},
++	{"SST25VF032B",	   0xbf254a, 0x0,	64 * 1024,    64, RD_NORM,	    SECT_4K | SST_WR},
++	{"SST25VF064C",	   0xbf254b, 0x0,	64 * 1024,   128, RD_NORM,		     SECT_4K},
++	{"SST25WF512",	   0xbf2501, 0x0,	64 * 1024,     1, RD_NORM,	    SECT_4K | SST_WR},
++	{"SST25WF010",	   0xbf2502, 0x0,	64 * 1024,     2, RD_NORM,          SECT_4K | SST_WR},
++	{"SST25WF020",	   0xbf2503, 0x0,	64 * 1024,     4, RD_NORM,	    SECT_4K | SST_WR},
++	{"SST25WF040",	   0xbf2504, 0x0,	64 * 1024,     8, RD_NORM,	    SECT_4K | SST_WR},
++	{"SST25WF080",	   0xbf2505, 0x0,	64 * 1024,    16, RD_NORM,	    SECT_4K | SST_WR},
+ #endif
+ #ifdef CONFIG_SPI_FLASH_WINBOND		/* WINBOND */
+-	{"W25P80",	   0xef2014, 0x0,	64 * 1024,    16,	0,		           0},
+-	{"W25P16",	   0xef2015, 0x0,	64 * 1024,    32,	0,		           0},
+-	{"W25P32",	   0xef2016, 0x0,	64 * 1024,    64,	0,		           0},
+-	{"W25X40",	   0xef3013, 0x0,	64 * 1024,     8,	0,		     SECT_4K},
+-	{"W25X16",	   0xef3015, 0x0,	64 * 1024,    32,	0,		     SECT_4K},
+-	{"W25X32",	   0xef3016, 0x0,	64 * 1024,    64,	0,		     SECT_4K},
+-	{"W25X64",	   0xef3017, 0x0,	64 * 1024,   128,	0,		     SECT_4K},
++	{"W25P80",	   0xef2014, 0x0,	64 * 1024,    16, RD_NORM,		           0},
++	{"W25P16",	   0xef2015, 0x0,	64 * 1024,    32, RD_NORM,		           0},
++	{"W25P32",	   0xef2016, 0x0,	64 * 1024,    64, RD_NORM,		           0},
++	{"W25X40",	   0xef3013, 0x0,	64 * 1024,     8, RD_NORM,		     SECT_4K},
++	{"W25X16",	   0xef3015, 0x0,	64 * 1024,    32, RD_NORM,		     SECT_4K},
++	{"W25X32",	   0xef3016, 0x0,	64 * 1024,    64, RD_NORM,		     SECT_4K},
++	{"W25X64",	   0xef3017, 0x0,	64 * 1024,   128, RD_NORM,		     SECT_4K},
+ 	{"W25Q80BL",	   0xef4014, 0x0,	64 * 1024,    16, RD_FULL,	    WR_QPP | SECT_4K},
+ 	{"W25Q16CL",	   0xef4015, 0x0,	64 * 1024,    32, RD_FULL,	    WR_QPP | SECT_4K},
+ 	{"W25Q32BV",	   0xef4016, 0x0,	64 * 1024,    64, RD_FULL,	    WR_QPP | SECT_4K},
+diff -ruN u-boot-2015.01-rc3/drivers/mtd/spi/sf_probe.c u-boot/drivers/mtd/spi/sf_probe.c
+--- u-boot-2015.01-rc3/drivers/mtd/spi/sf_probe.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/mtd/spi/sf_probe.c	2015-01-01 17:34:32.665496498 +0100
+@@ -24,6 +24,7 @@
+ /* Read commands array */
+ static u8 spi_read_cmds_array[] = {
+ 	CMD_READ_ARRAY_SLOW,
++	CMD_READ_ARRAY_FAST,
+ 	CMD_READ_DUAL_OUTPUT_FAST,
+ 	CMD_READ_DUAL_IO_FAST,
+ 	CMD_READ_QUAD_OUTPUT_FAST,
+@@ -135,8 +136,12 @@
+ #ifndef CONFIG_DM_SPI_FLASH
+ 	flash->write = spi_flash_cmd_write_ops;
+ #if defined(CONFIG_SPI_FLASH_SST)
+-	if (params->flags & SST_WP)
+-		flash->write = sst_write_wp;
++	if (params->flags & SST_WR) {
++		if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
++			flash->write = sst_write_bp;
++		else
++			flash->write = sst_write_wp;
++	}
+ #endif
+ 	flash->erase = spi_flash_cmd_erase_ops;
+ 	flash->read = spi_flash_cmd_read_ops;
+diff -ruN u-boot-2015.01-rc3/drivers/net/fm/init.c u-boot/drivers/net/fm/init.c
+--- u-boot-2015.01-rc3/drivers/net/fm/init.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/net/fm/init.c	2015-01-01 17:34:32.677496300 +0100
+@@ -247,17 +247,17 @@
+ 	}
+ 
+ #ifdef CONFIG_SYS_FMAN_V3
++#ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
+ 	/*
+-	 * Physically FM1_DTSEC9 and FM1_10GEC1 use the same dual-role MAC, when
+-	 * FM1_10GEC1 is enabled and  FM1_DTSEC9 is disabled, ensure that the
+-	 * dual-role MAC is not disabled, ditto for other dual-role MACs.
++	 * On T2/T4 SoCs, physically FM1_DTSEC9 and FM1_10GEC1 use the same
++	 * dual-role MAC, when FM1_10GEC1 is enabled and  FM1_DTSEC9
++	 * is disabled, ensure that the dual-role MAC is not disabled,
++	 * ditto for other dual-role MACs.
+ 	 */
+ 	if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
+ 	    ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
+-	    ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
+ 	    ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
+ 	    ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
+-	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
+ 	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))  ||
+ 	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
+ 	    ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
+@@ -269,6 +269,17 @@
+ 	    ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9)))	||
+ 	    ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
+ #endif
++#else
++	/* FM1_DTSECx and FM1_10GECx use the same dual-role MAC */
++	if (((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
++	    ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC2)))  ||
++	    ((info->port == FM1_DTSEC3) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
++	    ((info->port == FM1_DTSEC4) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
++	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
++	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC2)))  ||
++	    ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC3)))  ||
++	    ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC4)))
++#endif
+ 	)
+ 		return;
+ #endif
+diff -ruN u-boot-2015.01-rc3/drivers/pci/Makefile u-boot/drivers/pci/Makefile
+--- u-boot-2015.01-rc3/drivers/pci/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/pci/Makefile	2015-01-01 17:34:32.685496170 +0100
+@@ -17,3 +17,4 @@
+ obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
+ obj-$(CONFIG_TSI108_PCI) += tsi108_pci.o
+ obj-$(CONFIG_WINBOND_83C553) += w83c553f.o
++obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o
+diff -ruN u-boot-2015.01-rc3/drivers/pci/pcie_layerscape.c u-boot/drivers/pci/pcie_layerscape.c
+--- u-boot-2015.01-rc3/drivers/pci/pcie_layerscape.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/pci/pcie_layerscape.c	2015-01-01 17:34:32.689496104 +0100
+@@ -0,0 +1,51 @@
++/*
++ * Copyright 2014 Freescale Semiconductor, Inc.
++ * Layerscape PCIe driver
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/arch/fsl_serdes.h>
++#include <pci.h>
++#include <asm/io.h>
++#include <asm/pcie_layerscape.h>
++
++#ifdef CONFIG_OF_BOARD_SETUP
++#include <libfdt.h>
++#include <fdt_support.h>
++
++static void ft_pcie_ls_setup(void *blob, const char *pci_compat,
++			     unsigned long ctrl_addr, enum srds_prtcl dev)
++{
++	int off;
++
++	off = fdt_node_offset_by_compat_reg(blob, pci_compat,
++					    (phys_addr_t)ctrl_addr);
++	if (off < 0)
++		return;
++
++	if (!is_serdes_configured(dev))
++		fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
++}
++
++void ft_pcie_setup(void *blob, bd_t *bd)
++{
++	#ifdef CONFIG_PCIE1
++	ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE1_ADDR, PCIE1);
++	#endif
++
++	#ifdef CONFIG_PCIE2
++	ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2);
++	#endif
++}
++
++#else
++void ft_pcie_setup(void *blob, bd_t *bd)
++{
++}
++#endif
++
++void pci_init_board(void)
++{
++}
+diff -ruN u-boot-2015.01-rc3/drivers/power/tps6586x.c u-boot/drivers/power/tps6586x.c
+--- u-boot-2015.01-rc3/drivers/power/tps6586x.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/power/tps6586x.c	2015-01-01 17:34:32.693496038 +0100
+@@ -10,9 +10,7 @@
+ #include <asm/io.h>
+ #include <i2c.h>
+ 
+-static int bus_num;		/* I2C bus we are on */
+-#define I2C_ADDRESS		0x34	/* chip requires this address */
+-static char inited;		/* 1 if we have been inited */
++static struct udevice *tps6586x_dev;
+ 
+ enum {
+ 	/* Registers that we access */
+@@ -37,13 +35,9 @@
+ 	int	i;
+ 	uchar	data;
+ 	int	retval = -1;
+-	int	old_bus_num;
+-
+-	old_bus_num = i2c_get_bus_num();
+-	i2c_set_bus_num(bus_num);
+ 
+ 	for (i = 0; i < MAX_I2C_RETRY; ++i) {
+-		if (!i2c_read(I2C_ADDRESS, reg, 1, &data, 1)) {
++		if (!i2c_read(tps6586x_dev, reg,  &data, 1)) {
+ 			retval = (int)data;
+ 			goto exit;
+ 		}
+@@ -53,7 +47,6 @@
+ 	}
+ 
+ exit:
+-	i2c_set_bus_num(old_bus_num);
+ 	debug("pmu_read %x=%x\n", reg, retval);
+ 	if (retval < 0)
+ 		debug("%s: failed to read register %#x: %d\n", __func__, reg,
+@@ -65,13 +58,9 @@
+ {
+ 	int	i;
+ 	int	retval = -1;
+-	int	old_bus_num;
+-
+-	old_bus_num = i2c_get_bus_num();
+-	i2c_set_bus_num(bus_num);
+ 
+ 	for (i = 0; i < MAX_I2C_RETRY; ++i) {
+-		if (!i2c_write(I2C_ADDRESS, reg, 1, data, len)) {
++		if (!i2c_write(tps6586x_dev, reg, data, len)) {
+ 			retval = 0;
+ 			goto exit;
+ 		}
+@@ -81,7 +70,6 @@
+ 	}
+ 
+ exit:
+-	i2c_set_bus_num(old_bus_num);
+ 	debug("pmu_write %x=%x: ", reg, retval);
+ 	for (i = 0; i < len; i++)
+ 		debug("%x ", data[i]);
+@@ -163,7 +151,7 @@
+ 	uchar val;
+ 	int ret;
+ 
+-	assert(inited);
++	assert(tps6586x_dev);
+ 	ret = tps6586x_read(PFM_MODE);
+ 	if (ret != -1) {
+ 		val = (uchar)ret;
+@@ -184,7 +172,7 @@
+ 	int sm0, sm1;
+ 	int bad;
+ 
+-	assert(inited);
++	assert(tps6586x_dev);
+ 
+ 	/* get current voltage settings */
+ 	if (read_voltages(&sm0, &sm1)) {
+@@ -255,10 +243,9 @@
+ 	return bad ? -1 : 0;
+ }
+ 
+-int tps6586x_init(int bus)
++int tps6586x_init(struct udevice *dev)
+ {
+-	bus_num = bus;
+-	inited = 1;
++	tps6586x_dev = dev;
+ 
+ 	return 0;
+ }
+diff -ruN u-boot-2015.01-rc3/drivers/qe/qe.c u-boot/drivers/qe/qe.c
+--- u-boot-2015.01-rc3/drivers/qe/qe.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/qe/qe.c	2015-01-01 17:34:32.693496038 +0100
+@@ -13,6 +13,9 @@
+ #include "asm/io.h"
+ #include "linux/immap_qe.h"
+ #include "qe.h"
++#ifdef CONFIG_LS102XA
++#include <asm/arch/immap_ls102xa.h>
++#endif
+ 
+ #define MPC85xx_DEVDISR_QE_DISABLE	0x1
+ 
+@@ -335,8 +338,12 @@
+ 	size_t length;
+ 	const struct qe_header *hdr;
+ #ifdef CONFIG_DEEP_SLEEP
++#ifdef CONFIG_LS102XA
++	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
++#else
+ 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ #endif
++#endif
+ 	if (!firmware) {
+ 		printf("Invalid address\n");
+ 		return -EINVAL;
+@@ -470,8 +477,12 @@
+ 	size_t length;
+ 	const struct qe_header *hdr;
+ #ifdef CONFIG_DEEP_SLEEP
++#ifdef CONFIG_LS102XA
++	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
++#else
+ 	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ #endif
++#endif
+ 	if (!firmware) {
+ 		printf("Invalid address\n");
+ 		return -EINVAL;
+diff -ruN u-boot-2015.01-rc3/drivers/serial/Makefile u-boot/drivers/serial/Makefile
+--- u-boot-2015.01-rc3/drivers/serial/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/serial/Makefile	2015-01-01 17:34:32.697495972 +0100
+@@ -43,7 +43,7 @@
+ obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o
+ obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o
+ obj-$(CONFIG_OMAP_SERIAL) += serial_omap.o
+-obj-$(CONFIG_COREBOOT_SERIAL) += serial_coreboot.o
++obj-$(CONFIG_X86_SERIAL) += serial_x86.o
+ 
+ ifndef CONFIG_SPL_BUILD
+ obj-$(CONFIG_USB_TTY) += usbtty.o
+diff -ruN u-boot-2015.01-rc3/drivers/serial/serial_coreboot.c u-boot/drivers/serial/serial_coreboot.c
+--- u-boot-2015.01-rc3/drivers/serial/serial_coreboot.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/serial/serial_coreboot.c	1970-01-01 01:00:00.000000000 +0100
+@@ -1,38 +0,0 @@
+-/*
+- * Copyright (c) 2014 Google, Inc
+- *
+- * SPDX-License-Identifier:	GPL-2.0+
+- */
+-
+-#include <common.h>
+-#include <dm.h>
+-#include <ns16550.h>
+-#include <serial.h>
+-
+-static const struct udevice_id coreboot_serial_ids[] = {
+-	{ .compatible = "coreboot-uart" },
+-	{ }
+-};
+-
+-static int coreboot_serial_ofdata_to_platdata(struct udevice *dev)
+-{
+-	struct ns16550_platdata *plat = dev_get_platdata(dev);
+-	int ret;
+-
+-	ret = ns16550_serial_ofdata_to_platdata(dev);
+-	if (ret)
+-		return ret;
+-	plat->clock = 1843200;
+-
+-	return 0;
+-}
+-U_BOOT_DRIVER(serial_ns16550) = {
+-	.name	= "serial_coreboot",
+-	.id	= UCLASS_SERIAL,
+-	.of_match = coreboot_serial_ids,
+-	.ofdata_to_platdata = coreboot_serial_ofdata_to_platdata,
+-	.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
+-	.priv_auto_alloc_size = sizeof(struct NS16550),
+-	.probe = ns16550_serial_probe,
+-	.ops	= &ns16550_serial_ops,
+-};
+diff -ruN u-boot-2015.01-rc3/drivers/serial/serial_pl01x.c u-boot/drivers/serial/serial_pl01x.c
+--- u-boot-2015.01-rc3/drivers/serial/serial_pl01x.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/serial/serial_pl01x.c	2015-01-01 17:34:32.697495972 +0100
+@@ -348,6 +348,7 @@
+ 	.probe = pl01x_serial_probe,
+ 	.ops	= &pl01x_serial_ops,
+ 	.flags = DM_FLAG_PRE_RELOC,
++	.priv_auto_alloc_size = sizeof(struct pl01x_priv),
+ };
+ 
+ #endif
+diff -ruN u-boot-2015.01-rc3/drivers/serial/serial_x86.c u-boot/drivers/serial/serial_x86.c
+--- u-boot-2015.01-rc3/drivers/serial/serial_x86.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/serial/serial_x86.c	2015-01-01 17:34:32.697495972 +0100
+@@ -0,0 +1,38 @@
++/*
++ * Copyright (c) 2014 Google, Inc
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <ns16550.h>
++#include <serial.h>
++
++static const struct udevice_id x86_serial_ids[] = {
++	{ .compatible = "x86-uart" },
++	{ }
++};
++
++static int x86_serial_ofdata_to_platdata(struct udevice *dev)
++{
++	struct ns16550_platdata *plat = dev_get_platdata(dev);
++	int ret;
++
++	ret = ns16550_serial_ofdata_to_platdata(dev);
++	if (ret)
++		return ret;
++	plat->clock = 1843200;
++
++	return 0;
++}
++U_BOOT_DRIVER(serial_ns16550) = {
++	.name	= "serial_x86",
++	.id	= UCLASS_SERIAL,
++	.of_match = x86_serial_ids,
++	.ofdata_to_platdata = x86_serial_ofdata_to_platdata,
++	.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
++	.priv_auto_alloc_size = sizeof(struct NS16550),
++	.probe = ns16550_serial_probe,
++	.ops	= &ns16550_serial_ops,
++};
+diff -ruN u-boot-2015.01-rc3/drivers/spi/cadence_qspi_apb.c u-boot/drivers/spi/cadence_qspi_apb.c
+--- u-boot-2015.01-rc3/drivers/spi/cadence_qspi_apb.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/spi/cadence_qspi_apb.c	2015-01-01 17:34:32.701495908 +0100
+@@ -0,0 +1,898 @@
++/*
++ * Copyright (C) 2012 Altera Corporation <www.altera.com>
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *  - Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ *  - Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ *  - Neither the name of the Altera Corporation nor the
++ *    names of its contributors may be used to endorse or promote products
++ *    derived from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY
++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <asm/errno.h>
++#include "cadence_qspi.h"
++
++#define CQSPI_REG_POLL_US			(1) /* 1us */
++#define CQSPI_REG_RETRY				(10000)
++#define CQSPI_POLL_IDLE_RETRY			(3)
++
++#define CQSPI_FIFO_WIDTH			(4)
++
++/* Controller sram size in word */
++#define CQSPI_REG_SRAM_SIZE_WORD		(128)
++#define CQSPI_REG_SRAM_RESV_WORDS		(2)
++#define CQSPI_REG_SRAM_PARTITION_WR		(1)
++#define CQSPI_REG_SRAM_PARTITION_RD		\
++	(CQSPI_REG_SRAM_SIZE_WORD - CQSPI_REG_SRAM_RESV_WORDS)
++#define CQSPI_REG_SRAM_THRESHOLD_WORDS		(50)
++
++/* Transfer mode */
++#define CQSPI_INST_TYPE_SINGLE			(0)
++#define CQSPI_INST_TYPE_DUAL			(1)
++#define CQSPI_INST_TYPE_QUAD			(2)
++
++#define CQSPI_STIG_DATA_LEN_MAX			(8)
++#define CQSPI_INDIRECTTRIGGER_ADDR_MASK		(0xFFFFF)
++
++#define CQSPI_DUMMY_CLKS_PER_BYTE		(8)
++#define CQSPI_DUMMY_BYTES_MAX			(4)
++
++
++#define CQSPI_REG_SRAM_FILL_THRESHOLD	\
++	((CQSPI_REG_SRAM_SIZE_WORD / 2) * CQSPI_FIFO_WIDTH)
++/****************************************************************************
++ * Controller's configuration and status register (offset from QSPI_BASE)
++ ****************************************************************************/
++#define	CQSPI_REG_CONFIG			0x00
++#define	CQSPI_REG_CONFIG_CLK_POL_LSB		1
++#define	CQSPI_REG_CONFIG_CLK_PHA_LSB		2
++#define	CQSPI_REG_CONFIG_ENABLE_MASK		(1 << 0)
++#define	CQSPI_REG_CONFIG_DIRECT_MASK		(1 << 7)
++#define	CQSPI_REG_CONFIG_DECODE_MASK		(1 << 9)
++#define	CQSPI_REG_CONFIG_XIP_IMM_MASK		(1 << 18)
++#define	CQSPI_REG_CONFIG_CHIPSELECT_LSB		10
++#define	CQSPI_REG_CONFIG_BAUD_LSB		19
++#define	CQSPI_REG_CONFIG_IDLE_LSB		31
++#define	CQSPI_REG_CONFIG_CHIPSELECT_MASK	0xF
++#define	CQSPI_REG_CONFIG_BAUD_MASK		0xF
++
++#define	CQSPI_REG_RD_INSTR			0x04
++#define	CQSPI_REG_RD_INSTR_OPCODE_LSB		0
++#define	CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB	8
++#define	CQSPI_REG_RD_INSTR_TYPE_ADDR_LSB	12
++#define	CQSPI_REG_RD_INSTR_TYPE_DATA_LSB	16
++#define	CQSPI_REG_RD_INSTR_MODE_EN_LSB		20
++#define	CQSPI_REG_RD_INSTR_DUMMY_LSB		24
++#define	CQSPI_REG_RD_INSTR_TYPE_INSTR_MASK	0x3
++#define	CQSPI_REG_RD_INSTR_TYPE_ADDR_MASK	0x3
++#define	CQSPI_REG_RD_INSTR_TYPE_DATA_MASK	0x3
++#define	CQSPI_REG_RD_INSTR_DUMMY_MASK		0x1F
++
++#define	CQSPI_REG_WR_INSTR			0x08
++#define	CQSPI_REG_WR_INSTR_OPCODE_LSB		0
++
++#define	CQSPI_REG_DELAY				0x0C
++#define	CQSPI_REG_DELAY_TSLCH_LSB		0
++#define	CQSPI_REG_DELAY_TCHSH_LSB		8
++#define	CQSPI_REG_DELAY_TSD2D_LSB		16
++#define	CQSPI_REG_DELAY_TSHSL_LSB		24
++#define	CQSPI_REG_DELAY_TSLCH_MASK		0xFF
++#define	CQSPI_REG_DELAY_TCHSH_MASK		0xFF
++#define	CQSPI_REG_DELAY_TSD2D_MASK		0xFF
++#define	CQSPI_REG_DELAY_TSHSL_MASK		0xFF
++
++#define	CQSPI_READLCAPTURE			0x10
++#define	CQSPI_READLCAPTURE_BYPASS_LSB		0
++#define	CQSPI_READLCAPTURE_DELAY_LSB		1
++#define	CQSPI_READLCAPTURE_DELAY_MASK		0xF
++
++#define	CQSPI_REG_SIZE				0x14
++#define	CQSPI_REG_SIZE_ADDRESS_LSB		0
++#define	CQSPI_REG_SIZE_PAGE_LSB			4
++#define	CQSPI_REG_SIZE_BLOCK_LSB		16
++#define	CQSPI_REG_SIZE_ADDRESS_MASK		0xF
++#define	CQSPI_REG_SIZE_PAGE_MASK		0xFFF
++#define	CQSPI_REG_SIZE_BLOCK_MASK		0x3F
++
++#define	CQSPI_REG_SRAMPARTITION			0x18
++#define	CQSPI_REG_INDIRECTTRIGGER		0x1C
++
++#define	CQSPI_REG_REMAP				0x24
++#define	CQSPI_REG_MODE_BIT			0x28
++
++#define	CQSPI_REG_SDRAMLEVEL			0x2C
++#define	CQSPI_REG_SDRAMLEVEL_RD_LSB		0
++#define	CQSPI_REG_SDRAMLEVEL_WR_LSB		16
++#define	CQSPI_REG_SDRAMLEVEL_RD_MASK		0xFFFF
++#define	CQSPI_REG_SDRAMLEVEL_WR_MASK		0xFFFF
++
++#define	CQSPI_REG_IRQSTATUS			0x40
++#define	CQSPI_REG_IRQMASK			0x44
++
++#define	CQSPI_REG_INDIRECTRD			0x60
++#define	CQSPI_REG_INDIRECTRD_START_MASK		(1 << 0)
++#define	CQSPI_REG_INDIRECTRD_CANCEL_MASK	(1 << 1)
++#define	CQSPI_REG_INDIRECTRD_INPROGRESS_MASK	(1 << 2)
++#define	CQSPI_REG_INDIRECTRD_DONE_MASK		(1 << 5)
++
++#define	CQSPI_REG_INDIRECTRDWATERMARK		0x64
++#define	CQSPI_REG_INDIRECTRDSTARTADDR		0x68
++#define	CQSPI_REG_INDIRECTRDBYTES		0x6C
++
++#define	CQSPI_REG_CMDCTRL			0x90
++#define	CQSPI_REG_CMDCTRL_EXECUTE_MASK		(1 << 0)
++#define	CQSPI_REG_CMDCTRL_INPROGRESS_MASK	(1 << 1)
++#define	CQSPI_REG_CMDCTRL_DUMMY_LSB		7
++#define	CQSPI_REG_CMDCTRL_WR_BYTES_LSB		12
++#define	CQSPI_REG_CMDCTRL_WR_EN_LSB		15
++#define	CQSPI_REG_CMDCTRL_ADD_BYTES_LSB		16
++#define	CQSPI_REG_CMDCTRL_ADDR_EN_LSB		19
++#define	CQSPI_REG_CMDCTRL_RD_BYTES_LSB		20
++#define	CQSPI_REG_CMDCTRL_RD_EN_LSB		23
++#define	CQSPI_REG_CMDCTRL_OPCODE_LSB		24
++#define	CQSPI_REG_CMDCTRL_DUMMY_MASK		0x1F
++#define	CQSPI_REG_CMDCTRL_WR_BYTES_MASK		0x7
++#define	CQSPI_REG_CMDCTRL_ADD_BYTES_MASK	0x3
++#define	CQSPI_REG_CMDCTRL_RD_BYTES_MASK		0x7
++#define	CQSPI_REG_CMDCTRL_OPCODE_MASK		0xFF
++
++#define	CQSPI_REG_INDIRECTWR			0x70
++#define	CQSPI_REG_INDIRECTWR_START_MASK		(1 << 0)
++#define	CQSPI_REG_INDIRECTWR_CANCEL_MASK	(1 << 1)
++#define	CQSPI_REG_INDIRECTWR_INPROGRESS_MASK	(1 << 2)
++#define	CQSPI_REG_INDIRECTWR_DONE_MASK		(1 << 5)
++
++#define	CQSPI_REG_INDIRECTWRWATERMARK		0x74
++#define	CQSPI_REG_INDIRECTWRSTARTADDR		0x78
++#define	CQSPI_REG_INDIRECTWRBYTES		0x7C
++
++#define	CQSPI_REG_CMDADDRESS			0x94
++#define	CQSPI_REG_CMDREADDATALOWER		0xA0
++#define	CQSPI_REG_CMDREADDATAUPPER		0xA4
++#define	CQSPI_REG_CMDWRITEDATALOWER		0xA8
++#define	CQSPI_REG_CMDWRITEDATAUPPER		0xAC
++
++#define CQSPI_REG_IS_IDLE(base)					\
++	((readl(base + CQSPI_REG_CONFIG) >>		\
++		CQSPI_REG_CONFIG_IDLE_LSB) & 0x1)
++
++#define CQSPI_CAL_DELAY(tdelay_ns, tref_ns, tsclk_ns)		\
++	((((tdelay_ns) - (tsclk_ns)) / (tref_ns)))
++
++#define CQSPI_GET_RD_SRAM_LEVEL(reg_base)			\
++	(((readl(reg_base + CQSPI_REG_SDRAMLEVEL)) >>	\
++	CQSPI_REG_SDRAMLEVEL_RD_LSB) & CQSPI_REG_SDRAMLEVEL_RD_MASK)
++
++#define CQSPI_GET_WR_SRAM_LEVEL(reg_base)			\
++	(((readl(reg_base + CQSPI_REG_SDRAMLEVEL)) >>	\
++	CQSPI_REG_SDRAMLEVEL_WR_LSB) & CQSPI_REG_SDRAMLEVEL_WR_MASK)
++
++static unsigned int cadence_qspi_apb_cmd2addr(const unsigned char *addr_buf,
++	unsigned int addr_width)
++{
++	unsigned int addr;
++
++	addr = (addr_buf[0] << 16) | (addr_buf[1] << 8) | addr_buf[2];
++
++	if (addr_width == 4)
++		addr = (addr << 8) | addr_buf[3];
++
++	return addr;
++}
++
++static void cadence_qspi_apb_read_fifo_data(void *dest,
++	const void *src_ahb_addr, unsigned int bytes)
++{
++	unsigned int temp;
++	int remaining = bytes;
++	unsigned int *dest_ptr = (unsigned int *)dest;
++	unsigned int *src_ptr = (unsigned int *)src_ahb_addr;
++
++	while (remaining > 0) {
++		if (remaining >= CQSPI_FIFO_WIDTH) {
++			*dest_ptr = readl(src_ptr);
++			remaining -= CQSPI_FIFO_WIDTH;
++		} else {
++			/* dangling bytes */
++			temp = readl(src_ptr);
++			memcpy(dest_ptr, &temp, remaining);
++			break;
++		}
++		dest_ptr++;
++	}
++
++	return;
++}
++
++static void cadence_qspi_apb_write_fifo_data(const void *dest_ahb_addr,
++	const void *src, unsigned int bytes)
++{
++	unsigned int temp;
++	int remaining = bytes;
++	unsigned int *dest_ptr = (unsigned int *)dest_ahb_addr;
++	unsigned int *src_ptr = (unsigned int *)src;
++
++	while (remaining > 0) {
++		if (remaining >= CQSPI_FIFO_WIDTH) {
++			writel(*src_ptr, dest_ptr);
++			remaining -= sizeof(unsigned int);
++		} else {
++			/* dangling bytes */
++			memcpy(&temp, src_ptr, remaining);
++			writel(temp, dest_ptr);
++			break;
++		}
++		src_ptr++;
++	}
++
++	return;
++}
++
++/* Read from SRAM FIFO with polling SRAM fill level. */
++static int qspi_read_sram_fifo_poll(const void *reg_base, void *dest_addr,
++			const void *src_addr,  unsigned int num_bytes)
++{
++	unsigned int remaining = num_bytes;
++	unsigned int retry;
++	unsigned int sram_level = 0;
++	unsigned char *dest = (unsigned char *)dest_addr;
++
++	while (remaining > 0) {
++		retry = CQSPI_REG_RETRY;
++		while (retry--) {
++			sram_level = CQSPI_GET_RD_SRAM_LEVEL(reg_base);
++			if (sram_level)
++				break;
++			udelay(1);
++		}
++
++		if (!retry) {
++			printf("QSPI: No receive data after polling for %d times\n",
++			       CQSPI_REG_RETRY);
++			return -1;
++		}
++
++		sram_level *= CQSPI_FIFO_WIDTH;
++		sram_level = sram_level > remaining ? remaining : sram_level;
++
++		/* Read data from FIFO. */
++		cadence_qspi_apb_read_fifo_data(dest, src_addr, sram_level);
++		dest += sram_level;
++		remaining -= sram_level;
++		udelay(1);
++	}
++	return 0;
++}
++
++/* Write to SRAM FIFO with polling SRAM fill level. */
++static int qpsi_write_sram_fifo_push(struct cadence_spi_platdata *plat,
++				const void *src_addr, unsigned int num_bytes)
++{
++	const void *reg_base = plat->regbase;
++	void *dest_addr = plat->ahbbase;
++	unsigned int retry = CQSPI_REG_RETRY;
++	unsigned int sram_level;
++	unsigned int wr_bytes;
++	unsigned char *src = (unsigned char *)src_addr;
++	int remaining = num_bytes;
++	unsigned int page_size = plat->page_size;
++	unsigned int sram_threshold_words = CQSPI_REG_SRAM_THRESHOLD_WORDS;
++
++	while (remaining > 0) {
++		retry = CQSPI_REG_RETRY;
++		while (retry--) {
++			sram_level = CQSPI_GET_WR_SRAM_LEVEL(reg_base);
++			if (sram_level <= sram_threshold_words)
++				break;
++		}
++		if (!retry) {
++			printf("QSPI: SRAM fill level (0x%08x) not hit lower expected level (0x%08x)",
++			       sram_level, sram_threshold_words);
++			return -1;
++		}
++		/* Write a page or remaining bytes. */
++		wr_bytes = (remaining > page_size) ?
++					page_size : remaining;
++
++		cadence_qspi_apb_write_fifo_data(dest_addr, src, wr_bytes);
++		src += wr_bytes;
++		remaining -= wr_bytes;
++	}
++
++	return 0;
++}
++
++void cadence_qspi_apb_controller_enable(void *reg_base)
++{
++	unsigned int reg;
++	reg = readl(reg_base + CQSPI_REG_CONFIG);
++	reg |= CQSPI_REG_CONFIG_ENABLE_MASK;
++	writel(reg, reg_base + CQSPI_REG_CONFIG);
++	return;
++}
++
++void cadence_qspi_apb_controller_disable(void *reg_base)
++{
++	unsigned int reg;
++	reg = readl(reg_base + CQSPI_REG_CONFIG);
++	reg &= ~CQSPI_REG_CONFIG_ENABLE_MASK;
++	writel(reg, reg_base + CQSPI_REG_CONFIG);
++	return;
++}
++
++/* Return 1 if idle, otherwise return 0 (busy). */
++static unsigned int cadence_qspi_wait_idle(void *reg_base)
++{
++	unsigned int start, count = 0;
++	/* timeout in unit of ms */
++	unsigned int timeout = 5000;
++
++	start = get_timer(0);
++	for ( ; get_timer(start) < timeout ; ) {
++		if (CQSPI_REG_IS_IDLE(reg_base))
++			count++;
++		else
++			count = 0;
++		/*
++		 * Ensure the QSPI controller is in true idle state after
++		 * reading back the same idle status consecutively
++		 */
++		if (count >= CQSPI_POLL_IDLE_RETRY)
++			return 1;
++	}
++
++	/* Timeout, still in busy mode. */
++	printf("QSPI: QSPI is still busy after poll for %d times.\n",
++	       CQSPI_REG_RETRY);
++	return 0;
++}
++
++void cadence_qspi_apb_readdata_capture(void *reg_base,
++				unsigned int bypass, unsigned int delay)
++{
++	unsigned int reg;
++	cadence_qspi_apb_controller_disable(reg_base);
++
++	reg = readl(reg_base + CQSPI_READLCAPTURE);
++
++	if (bypass)
++		reg |= (1 << CQSPI_READLCAPTURE_BYPASS_LSB);
++	else
++		reg &= ~(1 << CQSPI_READLCAPTURE_BYPASS_LSB);
++
++	reg &= ~(CQSPI_READLCAPTURE_DELAY_MASK
++		<< CQSPI_READLCAPTURE_DELAY_LSB);
++
++	reg |= ((delay & CQSPI_READLCAPTURE_DELAY_MASK)
++		<< CQSPI_READLCAPTURE_DELAY_LSB);
++
++	writel(reg, reg_base + CQSPI_READLCAPTURE);
++
++	cadence_qspi_apb_controller_enable(reg_base);
++	return;
++}
++
++void cadence_qspi_apb_config_baudrate_div(void *reg_base,
++	unsigned int ref_clk_hz, unsigned int sclk_hz)
++{
++	unsigned int reg;
++	unsigned int div;
++
++	cadence_qspi_apb_controller_disable(reg_base);
++	reg = readl(reg_base + CQSPI_REG_CONFIG);
++	reg &= ~(CQSPI_REG_CONFIG_BAUD_MASK << CQSPI_REG_CONFIG_BAUD_LSB);
++
++	div = ref_clk_hz / sclk_hz;
++
++	if (div > 32)
++		div = 32;
++
++	/* Check if even number. */
++	if ((div & 1)) {
++		div = (div / 2);
++	} else {
++		if (ref_clk_hz % sclk_hz)
++			/* ensure generated SCLK doesn't exceed user
++			specified sclk_hz */
++			div = (div / 2);
++		else
++			div = (div / 2) - 1;
++	}
++
++	debug("%s: ref_clk %dHz sclk %dHz Div 0x%x\n", __func__,
++	      ref_clk_hz, sclk_hz, div);
++
++	div = (div & CQSPI_REG_CONFIG_BAUD_MASK) << CQSPI_REG_CONFIG_BAUD_LSB;
++	reg |= div;
++	writel(reg, reg_base + CQSPI_REG_CONFIG);
++
++	cadence_qspi_apb_controller_enable(reg_base);
++	return;
++}
++
++void cadence_qspi_apb_set_clk_mode(void *reg_base,
++	unsigned int clk_pol, unsigned int clk_pha)
++{
++	unsigned int reg;
++
++	cadence_qspi_apb_controller_disable(reg_base);
++	reg = readl(reg_base + CQSPI_REG_CONFIG);
++	reg &= ~(1 <<
++		(CQSPI_REG_CONFIG_CLK_POL_LSB | CQSPI_REG_CONFIG_CLK_PHA_LSB));
++
++	reg |= ((clk_pol & 0x1) << CQSPI_REG_CONFIG_CLK_POL_LSB);
++	reg |= ((clk_pha & 0x1) << CQSPI_REG_CONFIG_CLK_PHA_LSB);
++
++	writel(reg, reg_base + CQSPI_REG_CONFIG);
++
++	cadence_qspi_apb_controller_enable(reg_base);
++	return;
++}
++
++void cadence_qspi_apb_chipselect(void *reg_base,
++	unsigned int chip_select, unsigned int decoder_enable)
++{
++	unsigned int reg;
++
++	cadence_qspi_apb_controller_disable(reg_base);
++
++	debug("%s : chipselect %d decode %d\n", __func__, chip_select,
++	      decoder_enable);
++
++	reg = readl(reg_base + CQSPI_REG_CONFIG);
++	/* docoder */
++	if (decoder_enable) {
++		reg |= CQSPI_REG_CONFIG_DECODE_MASK;
++	} else {
++		reg &= ~CQSPI_REG_CONFIG_DECODE_MASK;
++		/* Convert CS if without decoder.
++		 * CS0 to 4b'1110
++		 * CS1 to 4b'1101
++		 * CS2 to 4b'1011
++		 * CS3 to 4b'0111
++		 */
++		chip_select = 0xF & ~(1 << chip_select);
++	}
++
++	reg &= ~(CQSPI_REG_CONFIG_CHIPSELECT_MASK
++			<< CQSPI_REG_CONFIG_CHIPSELECT_LSB);
++	reg |= (chip_select & CQSPI_REG_CONFIG_CHIPSELECT_MASK)
++			<< CQSPI_REG_CONFIG_CHIPSELECT_LSB;
++	writel(reg, reg_base + CQSPI_REG_CONFIG);
++
++	cadence_qspi_apb_controller_enable(reg_base);
++	return;
++}
++
++void cadence_qspi_apb_delay(void *reg_base,
++	unsigned int ref_clk, unsigned int sclk_hz,
++	unsigned int tshsl_ns, unsigned int tsd2d_ns,
++	unsigned int tchsh_ns, unsigned int tslch_ns)
++{
++	unsigned int ref_clk_ns;
++	unsigned int sclk_ns;
++	unsigned int tshsl, tchsh, tslch, tsd2d;
++	unsigned int reg;
++
++	cadence_qspi_apb_controller_disable(reg_base);
++
++	/* Convert to ns. */
++	ref_clk_ns = (1000000000) / ref_clk;
++
++	/* Convert to ns. */
++	sclk_ns = (1000000000) / sclk_hz;
++
++	/* Plus 1 to round up 1 clock cycle. */
++	tshsl = CQSPI_CAL_DELAY(tshsl_ns, ref_clk_ns, sclk_ns) + 1;
++	tchsh = CQSPI_CAL_DELAY(tchsh_ns, ref_clk_ns, sclk_ns) + 1;
++	tslch = CQSPI_CAL_DELAY(tslch_ns, ref_clk_ns, sclk_ns) + 1;
++	tsd2d = CQSPI_CAL_DELAY(tsd2d_ns, ref_clk_ns, sclk_ns) + 1;
++
++	reg = ((tshsl & CQSPI_REG_DELAY_TSHSL_MASK)
++			<< CQSPI_REG_DELAY_TSHSL_LSB);
++	reg |= ((tchsh & CQSPI_REG_DELAY_TCHSH_MASK)
++			<< CQSPI_REG_DELAY_TCHSH_LSB);
++	reg |= ((tslch & CQSPI_REG_DELAY_TSLCH_MASK)
++			<< CQSPI_REG_DELAY_TSLCH_LSB);
++	reg |= ((tsd2d & CQSPI_REG_DELAY_TSD2D_MASK)
++			<< CQSPI_REG_DELAY_TSD2D_LSB);
++	writel(reg, reg_base + CQSPI_REG_DELAY);
++
++	cadence_qspi_apb_controller_enable(reg_base);
++	return;
++}
++
++void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat)
++{
++	unsigned reg;
++
++	cadence_qspi_apb_controller_disable(plat->regbase);
++
++	/* Configure the device size and address bytes */
++	reg = readl(plat->regbase + CQSPI_REG_SIZE);
++	/* Clear the previous value */
++	reg &= ~(CQSPI_REG_SIZE_PAGE_MASK << CQSPI_REG_SIZE_PAGE_LSB);
++	reg &= ~(CQSPI_REG_SIZE_BLOCK_MASK << CQSPI_REG_SIZE_BLOCK_LSB);
++	reg |= (plat->page_size << CQSPI_REG_SIZE_PAGE_LSB);
++	reg |= (plat->block_size << CQSPI_REG_SIZE_BLOCK_LSB);
++	writel(reg, plat->regbase + CQSPI_REG_SIZE);
++
++	/* Configure the remap address register, no remap */
++	writel(0, plat->regbase + CQSPI_REG_REMAP);
++
++	/* Disable all interrupts */
++	writel(0, plat->regbase + CQSPI_REG_IRQMASK);
++
++	cadence_qspi_apb_controller_enable(plat->regbase);
++	return;
++}
++
++static int cadence_qspi_apb_exec_flash_cmd(void *reg_base,
++	unsigned int reg)
++{
++	unsigned int retry = CQSPI_REG_RETRY;
++
++	/* Write the CMDCTRL without start execution. */
++	writel(reg, reg_base + CQSPI_REG_CMDCTRL);
++	/* Start execute */
++	reg |= CQSPI_REG_CMDCTRL_EXECUTE_MASK;
++	writel(reg, reg_base + CQSPI_REG_CMDCTRL);
++
++	while (retry--) {
++		reg = readl(reg_base + CQSPI_REG_CMDCTRL);
++		if ((reg & CQSPI_REG_CMDCTRL_INPROGRESS_MASK) == 0)
++			break;
++		udelay(1);
++	}
++
++	if (!retry) {
++		printf("QSPI: flash command execution timeout\n");
++		return -EIO;
++	}
++
++	/* Polling QSPI idle status. */
++	if (!cadence_qspi_wait_idle(reg_base))
++		return -EIO;
++
++	return 0;
++}
++
++/* For command RDID, RDSR. */
++int cadence_qspi_apb_command_read(void *reg_base,
++	unsigned int cmdlen, const u8 *cmdbuf, unsigned int rxlen,
++	u8 *rxbuf)
++{
++	unsigned int reg;
++	unsigned int read_len;
++	int status;
++
++	if (!cmdlen || rxlen > CQSPI_STIG_DATA_LEN_MAX || rxbuf == NULL) {
++		printf("QSPI: Invalid input arguments cmdlen %d rxlen %d\n",
++		       cmdlen, rxlen);
++		return -EINVAL;
++	}
++
++	reg = cmdbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB;
++
++	reg |= (0x1 << CQSPI_REG_CMDCTRL_RD_EN_LSB);
++
++	/* 0 means 1 byte. */
++	reg |= (((rxlen - 1) & CQSPI_REG_CMDCTRL_RD_BYTES_MASK)
++		<< CQSPI_REG_CMDCTRL_RD_BYTES_LSB);
++	status = cadence_qspi_apb_exec_flash_cmd(reg_base, reg);
++	if (status != 0)
++		return status;
++
++	reg = readl(reg_base + CQSPI_REG_CMDREADDATALOWER);
++
++	/* Put the read value into rx_buf */
++	read_len = (rxlen > 4) ? 4 : rxlen;
++	memcpy(rxbuf, &reg, read_len);
++	rxbuf += read_len;
++
++	if (rxlen > 4) {
++		reg = readl(reg_base + CQSPI_REG_CMDREADDATAUPPER);
++
++		read_len = rxlen - read_len;
++		memcpy(rxbuf, &reg, read_len);
++	}
++	return 0;
++}
++
++/* For commands: WRSR, WREN, WRDI, CHIP_ERASE, BE, etc. */
++int cadence_qspi_apb_command_write(void *reg_base, unsigned int cmdlen,
++	const u8 *cmdbuf, unsigned int txlen,  const u8 *txbuf)
++{
++	unsigned int reg = 0;
++	unsigned int addr_value;
++	unsigned int wr_data;
++	unsigned int wr_len;
++
++	if (!cmdlen || cmdlen > 5 || txlen > 8 || cmdbuf == NULL) {
++		printf("QSPI: Invalid input arguments cmdlen %d txlen %d\n",
++		       cmdlen, txlen);
++		return -EINVAL;
++	}
++
++	reg |= cmdbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB;
++
++	if (cmdlen == 4 || cmdlen == 5) {
++		/* Command with address */
++		reg |= (0x1 << CQSPI_REG_CMDCTRL_ADDR_EN_LSB);
++		/* Number of bytes to write. */
++		reg |= ((cmdlen - 2) & CQSPI_REG_CMDCTRL_ADD_BYTES_MASK)
++			<< CQSPI_REG_CMDCTRL_ADD_BYTES_LSB;
++		/* Get address */
++		addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1],
++			cmdlen >= 5 ? 4 : 3);
++
++		writel(addr_value, reg_base + CQSPI_REG_CMDADDRESS);
++	}
++
++	if (txlen) {
++		/* writing data = yes */
++		reg |= (0x1 << CQSPI_REG_CMDCTRL_WR_EN_LSB);
++		reg |= ((txlen - 1) & CQSPI_REG_CMDCTRL_WR_BYTES_MASK)
++			<< CQSPI_REG_CMDCTRL_WR_BYTES_LSB;
++
++		wr_len = txlen > 4 ? 4 : txlen;
++		memcpy(&wr_data, txbuf, wr_len);
++		writel(wr_data, reg_base +
++			CQSPI_REG_CMDWRITEDATALOWER);
++
++		if (txlen > 4) {
++			txbuf += wr_len;
++			wr_len = txlen - wr_len;
++			memcpy(&wr_data, txbuf, wr_len);
++			writel(wr_data, reg_base +
++				CQSPI_REG_CMDWRITEDATAUPPER);
++		}
++	}
++
++	/* Execute the command */
++	return cadence_qspi_apb_exec_flash_cmd(reg_base, reg);
++}
++
++/* Opcode + Address (3/4 bytes) + dummy bytes (0-4 bytes) */
++int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
++	unsigned int cmdlen, const u8 *cmdbuf)
++{
++	unsigned int reg;
++	unsigned int rd_reg;
++	unsigned int addr_value;
++	unsigned int dummy_clk;
++	unsigned int dummy_bytes;
++	unsigned int addr_bytes;
++
++	/*
++	 * Identify addr_byte. All NOR flash device drivers are using fast read
++	 * which always expecting 1 dummy byte, 1 cmd byte and 3/4 addr byte.
++	 * With that, the length is in value of 5 or 6. Only FRAM chip from
++	 * ramtron using normal read (which won't need dummy byte).
++	 * Unlikely NOR flash using normal read due to performance issue.
++	 */
++	if (cmdlen >= 5)
++		/* to cater fast read where cmd + addr + dummy */
++		addr_bytes = cmdlen - 2;
++	else
++		/* for normal read (only ramtron as of now) */
++		addr_bytes = cmdlen - 1;
++
++	/* Setup the indirect trigger address */
++	writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
++	       plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
++
++	/* Configure SRAM partition for read. */
++	writel(CQSPI_REG_SRAM_PARTITION_RD, plat->regbase +
++	       CQSPI_REG_SRAMPARTITION);
++
++	/* Configure the opcode */
++	rd_reg = cmdbuf[0] << CQSPI_REG_RD_INSTR_OPCODE_LSB;
++
++#if (CONFIG_SPI_FLASH_QUAD == 1)
++	/* Instruction and address at DQ0, data at DQ0-3. */
++	rd_reg |= CQSPI_INST_TYPE_QUAD << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB;
++#endif
++
++	/* Get address */
++	addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes);
++	writel(addr_value, plat->regbase + CQSPI_REG_INDIRECTRDSTARTADDR);
++
++	/* The remaining lenght is dummy bytes. */
++	dummy_bytes = cmdlen - addr_bytes - 1;
++	if (dummy_bytes) {
++		if (dummy_bytes > CQSPI_DUMMY_BYTES_MAX)
++			dummy_bytes = CQSPI_DUMMY_BYTES_MAX;
++
++		rd_reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB);
++#if defined(CONFIG_SPL_SPI_XIP) && defined(CONFIG_SPL_BUILD)
++		writel(0x0, plat->regbase + CQSPI_REG_MODE_BIT);
++#else
++		writel(0xFF, plat->regbase + CQSPI_REG_MODE_BIT);
++#endif
++
++		/* Convert to clock cycles. */
++		dummy_clk = dummy_bytes * CQSPI_DUMMY_CLKS_PER_BYTE;
++		/* Need to minus the mode byte (8 clocks). */
++		dummy_clk -= CQSPI_DUMMY_CLKS_PER_BYTE;
++
++		if (dummy_clk)
++			rd_reg |= (dummy_clk & CQSPI_REG_RD_INSTR_DUMMY_MASK)
++				<< CQSPI_REG_RD_INSTR_DUMMY_LSB;
++	}
++
++	writel(rd_reg, plat->regbase + CQSPI_REG_RD_INSTR);
++
++	/* set device size */
++	reg = readl(plat->regbase + CQSPI_REG_SIZE);
++	reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
++	reg |= (addr_bytes - 1);
++	writel(reg, plat->regbase + CQSPI_REG_SIZE);
++	return 0;
++}
++
++int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
++	unsigned int rxlen, u8 *rxbuf)
++{
++	unsigned int reg;
++
++	writel(rxlen, plat->regbase + CQSPI_REG_INDIRECTRDBYTES);
++
++	/* Start the indirect read transfer */
++	writel(CQSPI_REG_INDIRECTRD_START_MASK,
++	       plat->regbase + CQSPI_REG_INDIRECTRD);
++
++	if (qspi_read_sram_fifo_poll(plat->regbase, (void *)rxbuf,
++				     (const void *)plat->ahbbase, rxlen))
++		goto failrd;
++
++	/* Check flash indirect controller */
++	reg = readl(plat->regbase + CQSPI_REG_INDIRECTRD);
++	if (!(reg & CQSPI_REG_INDIRECTRD_DONE_MASK)) {
++		reg = readl(plat->regbase + CQSPI_REG_INDIRECTRD);
++		printf("QSPI: indirect completion status error with reg 0x%08x\n",
++		       reg);
++		goto failrd;
++	}
++
++	/* Clear indirect completion status */
++	writel(CQSPI_REG_INDIRECTRD_DONE_MASK,
++	       plat->regbase + CQSPI_REG_INDIRECTRD);
++	return 0;
++
++failrd:
++	/* Cancel the indirect read */
++	writel(CQSPI_REG_INDIRECTRD_CANCEL_MASK,
++	       plat->regbase + CQSPI_REG_INDIRECTRD);
++	return -1;
++}
++
++/* Opcode + Address (3/4 bytes) */
++int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
++	unsigned int cmdlen, const u8 *cmdbuf)
++{
++	unsigned int reg;
++	unsigned int addr_bytes = cmdlen > 4 ? 4 : 3;
++
++	if (cmdlen < 4 || cmdbuf == NULL) {
++		printf("QSPI: iInvalid input argument, len %d cmdbuf 0x%08x\n",
++		       cmdlen, (unsigned int)cmdbuf);
++		return -EINVAL;
++	}
++	/* Setup the indirect trigger address */
++	writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
++	       plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
++
++	writel(CQSPI_REG_SRAM_PARTITION_WR,
++	       plat->regbase + CQSPI_REG_SRAMPARTITION);
++
++	/* Configure the opcode */
++	reg = cmdbuf[0] << CQSPI_REG_WR_INSTR_OPCODE_LSB;
++	writel(reg, plat->regbase + CQSPI_REG_WR_INSTR);
++
++	/* Setup write address. */
++	reg = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes);
++	writel(reg, plat->regbase + CQSPI_REG_INDIRECTWRSTARTADDR);
++
++	reg = readl(plat->regbase + CQSPI_REG_SIZE);
++	reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
++	reg |= (addr_bytes - 1);
++	writel(reg, plat->regbase + CQSPI_REG_SIZE);
++	return 0;
++}
++
++int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
++	unsigned int txlen, const u8 *txbuf)
++{
++	unsigned int reg = 0;
++	unsigned int retry;
++
++	/* Configure the indirect read transfer bytes */
++	writel(txlen, plat->regbase + CQSPI_REG_INDIRECTWRBYTES);
++
++	/* Start the indirect write transfer */
++	writel(CQSPI_REG_INDIRECTWR_START_MASK,
++	       plat->regbase + CQSPI_REG_INDIRECTWR);
++
++	if (qpsi_write_sram_fifo_push(plat, (const void *)txbuf, txlen))
++		goto failwr;
++
++	/* Wait until last write is completed (FIFO empty) */
++	retry = CQSPI_REG_RETRY;
++	while (retry--) {
++		reg = CQSPI_GET_WR_SRAM_LEVEL(plat->regbase);
++		if (reg == 0)
++			break;
++
++		udelay(1);
++	}
++
++	if (reg != 0) {
++		printf("QSPI: timeout for indirect write\n");
++		goto failwr;
++	}
++
++	/* Check flash indirect controller status */
++	retry = CQSPI_REG_RETRY;
++	while (retry--) {
++		reg = readl(plat->regbase + CQSPI_REG_INDIRECTWR);
++		if (reg & CQSPI_REG_INDIRECTWR_DONE_MASK)
++			break;
++		udelay(1);
++	}
++
++	if (!(reg & CQSPI_REG_INDIRECTWR_DONE_MASK)) {
++		printf("QSPI: indirect completion status error with reg 0x%08x\n",
++		       reg);
++		goto failwr;
++	}
++
++	/* Clear indirect completion status */
++	writel(CQSPI_REG_INDIRECTWR_DONE_MASK,
++	       plat->regbase + CQSPI_REG_INDIRECTWR);
++	return 0;
++
++failwr:
++	/* Cancel the indirect write */
++	writel(CQSPI_REG_INDIRECTWR_CANCEL_MASK,
++	       plat->regbase + CQSPI_REG_INDIRECTWR);
++	return -1;
++}
++
++void cadence_qspi_apb_enter_xip(void *reg_base, char xip_dummy)
++{
++	unsigned int reg;
++
++	/* enter XiP mode immediately and enable direct mode */
++	reg = readl(reg_base + CQSPI_REG_CONFIG);
++	reg |= CQSPI_REG_CONFIG_ENABLE_MASK;
++	reg |= CQSPI_REG_CONFIG_DIRECT_MASK;
++	reg |= CQSPI_REG_CONFIG_XIP_IMM_MASK;
++	writel(reg, reg_base + CQSPI_REG_CONFIG);
++
++	/* keep the XiP mode */
++	writel(xip_dummy, reg_base + CQSPI_REG_MODE_BIT);
++
++	/* Enable mode bit at devrd */
++	reg = readl(reg_base + CQSPI_REG_RD_INSTR);
++	reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB);
++	writel(reg, reg_base + CQSPI_REG_RD_INSTR);
++}
+diff -ruN u-boot-2015.01-rc3/drivers/spi/cadence_qspi.c u-boot/drivers/spi/cadence_qspi.c
+--- u-boot-2015.01-rc3/drivers/spi/cadence_qspi.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/spi/cadence_qspi.c	2015-01-01 17:34:32.701495908 +0100
+@@ -0,0 +1,345 @@
++/*
++ * Copyright (C) 2012
++ * Altera Corporation <www.altera.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <fdtdec.h>
++#include <malloc.h>
++#include <spi.h>
++#include <asm/errno.h>
++#include "cadence_qspi.h"
++
++#define CQSPI_STIG_READ			0
++#define CQSPI_STIG_WRITE		1
++#define CQSPI_INDIRECT_READ		2
++#define CQSPI_INDIRECT_WRITE		3
++
++DECLARE_GLOBAL_DATA_PTR;
++
++static int cadence_spi_write_speed(struct udevice *bus, uint hz)
++{
++	struct cadence_spi_platdata *plat = bus->platdata;
++	struct cadence_spi_priv *priv = dev_get_priv(bus);
++
++	cadence_qspi_apb_config_baudrate_div(priv->regbase,
++					     CONFIG_CQSPI_REF_CLK, hz);
++
++	/* Reconfigure delay timing if speed is changed. */
++	cadence_qspi_apb_delay(priv->regbase, CONFIG_CQSPI_REF_CLK, hz,
++			       plat->tshsl_ns, plat->tsd2d_ns,
++			       plat->tchsh_ns, plat->tslch_ns);
++
++	return 0;
++}
++
++/* Calibration sequence to determine the read data capture delay register */
++static int spi_calibration(struct udevice *bus)
++{
++	struct cadence_spi_platdata *plat = bus->platdata;
++	struct cadence_spi_priv *priv = dev_get_priv(bus);
++	void *base = priv->regbase;
++	u8 opcode_rdid = 0x9F;
++	unsigned int idcode = 0, temp = 0;
++	int err = 0, i, range_lo = -1, range_hi = -1;
++
++	/* start with slowest clock (1 MHz) */
++	cadence_spi_write_speed(bus, 1000000);
++
++	/* configure the read data capture delay register to 0 */
++	cadence_qspi_apb_readdata_capture(base, 1, 0);
++
++	/* Enable QSPI */
++	cadence_qspi_apb_controller_enable(base);
++
++	/* read the ID which will be our golden value */
++	err = cadence_qspi_apb_command_read(base, 1, &opcode_rdid,
++		3, (u8 *)&idcode);
++	if (err) {
++		puts("SF: Calibration failed (read)\n");
++		return err;
++	}
++
++	/* use back the intended clock and find low range */
++	cadence_spi_write_speed(bus, plat->max_hz);
++	for (i = 0; i < CQSPI_READ_CAPTURE_MAX_DELAY; i++) {
++		/* Disable QSPI */
++		cadence_qspi_apb_controller_disable(base);
++
++		/* reconfigure the read data capture delay register */
++		cadence_qspi_apb_readdata_capture(base, 1, i);
++
++		/* Enable back QSPI */
++		cadence_qspi_apb_controller_enable(base);
++
++		/* issue a RDID to get the ID value */
++		err = cadence_qspi_apb_command_read(base, 1, &opcode_rdid,
++			3, (u8 *)&temp);
++		if (err) {
++			puts("SF: Calibration failed (read)\n");
++			return err;
++		}
++
++		/* search for range lo */
++		if (range_lo == -1 && temp == idcode) {
++			range_lo = i;
++			continue;
++		}
++
++		/* search for range hi */
++		if (range_lo != -1 && temp != idcode) {
++			range_hi = i - 1;
++			break;
++		}
++		range_hi = i;
++	}
++
++	if (range_lo == -1) {
++		puts("SF: Calibration failed (low range)\n");
++		return err;
++	}
++
++	/* Disable QSPI for subsequent initialization */
++	cadence_qspi_apb_controller_disable(base);
++
++	/* configure the final value for read data capture delay register */
++	cadence_qspi_apb_readdata_capture(base, 1, (range_hi + range_lo) / 2);
++	debug("SF: Read data capture delay calibrated to %i (%i - %i)\n",
++	      (range_hi + range_lo) / 2, range_lo, range_hi);
++
++	/* just to ensure we do once only when speed or chip select change */
++	priv->qspi_calibrated_hz = plat->max_hz;
++	priv->qspi_calibrated_cs = spi_chip_select(bus);
++
++	return 0;
++}
++
++static int cadence_spi_set_speed(struct udevice *bus, uint hz)
++{
++	struct cadence_spi_platdata *plat = bus->platdata;
++	struct cadence_spi_priv *priv = dev_get_priv(bus);
++	int err;
++
++	/* Disable QSPI */
++	cadence_qspi_apb_controller_disable(priv->regbase);
++
++	cadence_spi_write_speed(bus, hz);
++
++	/* Calibration required for different SCLK speed or chip select */
++	if (priv->qspi_calibrated_hz != plat->max_hz ||
++	    priv->qspi_calibrated_cs != spi_chip_select(bus)) {
++		err = spi_calibration(bus);
++		if (err)
++			return err;
++	}
++
++	/* Enable QSPI */
++	cadence_qspi_apb_controller_enable(priv->regbase);
++
++	debug("%s: speed=%d\n", __func__, hz);
++
++	return 0;
++}
++
++static int cadence_spi_probe(struct udevice *bus)
++{
++	struct cadence_spi_platdata *plat = bus->platdata;
++	struct cadence_spi_priv *priv = dev_get_priv(bus);
++
++	priv->regbase = plat->regbase;
++	priv->ahbbase = plat->ahbbase;
++
++	if (!priv->qspi_is_init) {
++		cadence_qspi_apb_controller_init(plat);
++		priv->qspi_is_init = 1;
++	}
++
++	return 0;
++}
++
++static int cadence_spi_set_mode(struct udevice *bus, uint mode)
++{
++	struct cadence_spi_priv *priv = dev_get_priv(bus);
++	unsigned int clk_pol = (mode & SPI_CPOL) ? 1 : 0;
++	unsigned int clk_pha = (mode & SPI_CPHA) ? 1 : 0;
++
++	/* Disable QSPI */
++	cadence_qspi_apb_controller_disable(priv->regbase);
++
++	/* Set SPI mode */
++	cadence_qspi_apb_set_clk_mode(priv->regbase, clk_pol, clk_pha);
++
++	/* Enable QSPI */
++	cadence_qspi_apb_controller_enable(priv->regbase);
++
++	return 0;
++}
++
++static int cadence_spi_xfer(struct udevice *dev, unsigned int bitlen,
++			    const void *dout, void *din, unsigned long flags)
++{
++	struct udevice *bus = dev->parent;
++	struct cadence_spi_platdata *plat = bus->platdata;
++	struct cadence_spi_priv *priv = dev_get_priv(bus);
++	void *base = priv->regbase;
++	u8 *cmd_buf = priv->cmd_buf;
++	size_t data_bytes;
++	int err = 0;
++	u32 mode = CQSPI_STIG_WRITE;
++
++	if (flags & SPI_XFER_BEGIN) {
++		/* copy command to local buffer */
++		priv->cmd_len = bitlen / 8;
++		memcpy(cmd_buf, dout, priv->cmd_len);
++	}
++
++	if (flags == (SPI_XFER_BEGIN | SPI_XFER_END)) {
++		/* if start and end bit are set, the data bytes is 0. */
++		data_bytes = 0;
++	} else {
++		data_bytes = bitlen / 8;
++	}
++	debug("%s: len=%d [bytes]\n", __func__, data_bytes);
++
++	/* Set Chip select */
++	cadence_qspi_apb_chipselect(base, spi_chip_select(dev),
++				    CONFIG_CQSPI_DECODER);
++
++	if ((flags & SPI_XFER_END) || (flags == 0)) {
++		if (priv->cmd_len == 0) {
++			printf("QSPI: Error, command is empty.\n");
++			return -1;
++		}
++
++		if (din && data_bytes) {
++			/* read */
++			/* Use STIG if no address. */
++			if (!CQSPI_IS_ADDR(priv->cmd_len))
++				mode = CQSPI_STIG_READ;
++			else
++				mode = CQSPI_INDIRECT_READ;
++		} else if (dout && !(flags & SPI_XFER_BEGIN)) {
++			/* write */
++			if (!CQSPI_IS_ADDR(priv->cmd_len))
++				mode = CQSPI_STIG_WRITE;
++			else
++				mode = CQSPI_INDIRECT_WRITE;
++		}
++
++		switch (mode) {
++		case CQSPI_STIG_READ:
++			err = cadence_qspi_apb_command_read(
++				base, priv->cmd_len, cmd_buf,
++				data_bytes, din);
++
++		break;
++		case CQSPI_STIG_WRITE:
++			err = cadence_qspi_apb_command_write(base,
++				priv->cmd_len, cmd_buf,
++				data_bytes, dout);
++		break;
++		case CQSPI_INDIRECT_READ:
++			err = cadence_qspi_apb_indirect_read_setup(plat,
++				priv->cmd_len, cmd_buf);
++			if (!err) {
++				err = cadence_qspi_apb_indirect_read_execute
++				(plat, data_bytes, din);
++			}
++		break;
++		case CQSPI_INDIRECT_WRITE:
++			err = cadence_qspi_apb_indirect_write_setup
++				(plat, priv->cmd_len, cmd_buf);
++			if (!err) {
++				err = cadence_qspi_apb_indirect_write_execute
++				(plat, data_bytes, dout);
++			}
++		break;
++		default:
++			err = -1;
++			break;
++		}
++
++		if (flags & SPI_XFER_END) {
++			/* clear command buffer */
++			memset(cmd_buf, 0, sizeof(priv->cmd_buf));
++			priv->cmd_len = 0;
++		}
++	}
++
++	return err;
++}
++
++static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
++{
++	struct cadence_spi_platdata *plat = bus->platdata;
++	const void *blob = gd->fdt_blob;
++	int node = bus->of_offset;
++	int subnode;
++	u32 data[4];
++	int ret;
++
++	/* 2 base addresses are needed, lets get them from the DT */
++	ret = fdtdec_get_int_array(blob, node, "reg", data, ARRAY_SIZE(data));
++	if (ret) {
++		printf("Error: Can't get base addresses (ret=%d)!\n", ret);
++		return -ENODEV;
++	}
++
++	plat->regbase = (void *)data[0];
++	plat->ahbbase = (void *)data[2];
++
++	/* Use 500KHz as a suitable default */
++	plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
++				      500000);
++
++	/* All other paramters are embedded in the child node */
++	subnode = fdt_first_subnode(blob, node);
++	if (!subnode) {
++		printf("Error: subnode with SPI flash config missing!\n");
++		return -ENODEV;
++	}
++
++	/* Read other parameters from DT */
++	plat->page_size = fdtdec_get_int(blob, subnode, "page-size", 256);
++	plat->block_size = fdtdec_get_int(blob, subnode, "block-size", 16);
++	plat->tshsl_ns = fdtdec_get_int(blob, subnode, "tshsl-ns", 200);
++	plat->tsd2d_ns = fdtdec_get_int(blob, subnode, "tsd2d-ns", 255);
++	plat->tchsh_ns = fdtdec_get_int(blob, subnode, "tchsh-ns", 20);
++	plat->tslch_ns = fdtdec_get_int(blob, subnode, "tslch-ns", 20);
++
++	debug("%s: regbase=%p ahbbase=%p max-frequency=%d page-size=%d\n",
++	      __func__, plat->regbase, plat->ahbbase, plat->max_hz,
++	      plat->page_size);
++
++	return 0;
++}
++
++static const struct dm_spi_ops cadence_spi_ops = {
++	.xfer		= cadence_spi_xfer,
++	.set_speed	= cadence_spi_set_speed,
++	.set_mode	= cadence_spi_set_mode,
++	/*
++	 * cs_info is not needed, since we require all chip selects to be
++	 * in the device tree explicitly
++	 */
++};
++
++static const struct udevice_id cadence_spi_ids[] = {
++	{ .compatible = "cadence,qspi" },
++	{ }
++};
++
++U_BOOT_DRIVER(cadence_spi) = {
++	.name = "cadence_spi",
++	.id = UCLASS_SPI,
++	.of_match = cadence_spi_ids,
++	.ops = &cadence_spi_ops,
++	.ofdata_to_platdata = cadence_spi_ofdata_to_platdata,
++	.platdata_auto_alloc_size = sizeof(struct cadence_spi_platdata),
++	.priv_auto_alloc_size = sizeof(struct cadence_spi_priv),
++	.per_child_auto_alloc_size = sizeof(struct spi_slave),
++	.probe = cadence_spi_probe,
++};
+diff -ruN u-boot-2015.01-rc3/drivers/spi/cadence_qspi.h u-boot/drivers/spi/cadence_qspi.h
+--- u-boot-2015.01-rc3/drivers/spi/cadence_qspi.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/spi/cadence_qspi.h	2015-01-01 17:34:32.701495908 +0100
+@@ -0,0 +1,76 @@
++/*
++ * Copyright (C) 2012
++ * Altera Corporation <www.altera.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __CADENCE_QSPI_H__
++#define __CADENCE_QSPI_H__
++
++#define CQSPI_IS_ADDR(cmd_len)		(cmd_len > 1 ? 1 : 0)
++
++#define CQSPI_NO_DECODER_MAX_CS		4
++#define CQSPI_DECODER_MAX_CS		16
++#define CQSPI_READ_CAPTURE_MAX_DELAY	16
++
++struct cadence_spi_platdata {
++	unsigned int	max_hz;
++	void		*regbase;
++	void		*ahbbase;
++
++	u32		page_size;
++	u32		block_size;
++	u32		tshsl_ns;
++	u32		tsd2d_ns;
++	u32		tchsh_ns;
++	u32		tslch_ns;
++};
++
++struct cadence_spi_priv {
++	void		*regbase;
++	void		*ahbbase;
++	size_t		cmd_len;
++	u8		cmd_buf[32];
++	size_t		data_len;
++
++	int		qspi_is_init;
++	unsigned int	qspi_calibrated_hz;
++	unsigned int	qspi_calibrated_cs;
++};
++
++/* Functions call declaration */
++void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat);
++void cadence_qspi_apb_controller_enable(void *reg_base_addr);
++void cadence_qspi_apb_controller_disable(void *reg_base_addr);
++
++int cadence_qspi_apb_command_read(void *reg_base_addr,
++	unsigned int cmdlen, const u8 *cmdbuf, unsigned int rxlen, u8 *rxbuf);
++int cadence_qspi_apb_command_write(void *reg_base_addr,
++	unsigned int cmdlen, const u8 *cmdbuf,
++	unsigned int txlen,  const u8 *txbuf);
++
++int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
++	unsigned int cmdlen, const u8 *cmdbuf);
++int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
++	unsigned int rxlen, u8 *rxbuf);
++int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
++	unsigned int cmdlen, const u8 *cmdbuf);
++int cadence_qspi_apb_indirect_write_execute(struct cadence_spi_platdata *plat,
++	unsigned int txlen, const u8 *txbuf);
++
++void cadence_qspi_apb_chipselect(void *reg_base,
++	unsigned int chip_select, unsigned int decoder_enable);
++void cadence_qspi_apb_set_clk_mode(void *reg_base_addr,
++	unsigned int clk_pol, unsigned int clk_pha);
++void cadence_qspi_apb_config_baudrate_div(void *reg_base,
++	unsigned int ref_clk_hz, unsigned int sclk_hz);
++void cadence_qspi_apb_delay(void *reg_base,
++	unsigned int ref_clk, unsigned int sclk_hz,
++	unsigned int tshsl_ns, unsigned int tsd2d_ns,
++	unsigned int tchsh_ns, unsigned int tslch_ns);
++void cadence_qspi_apb_enter_xip(void *reg_base, char xip_dummy);
++void cadence_qspi_apb_readdata_capture(void *reg_base,
++	unsigned int bypass, unsigned int delay);
++
++#endif /* __CADENCE_QSPI_H__ */
+diff -ruN u-boot-2015.01-rc3/drivers/spi/designware_spi.c u-boot/drivers/spi/designware_spi.c
+--- u-boot-2015.01-rc3/drivers/spi/designware_spi.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/drivers/spi/designware_spi.c	2015-01-01 17:34:32.701495908 +0100
+@@ -0,0 +1,426 @@
++/*
++ * Designware master SPI core controller driver
++ *
++ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
++ *
++ * Very loosely based on the Linux driver:
++ * drivers/spi/spi-dw.c, which is:
++ * Copyright (c) 2009, Intel Corporation.
++ *
++ * SPDX-License-Identifier:	GPL-2.0
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <errno.h>
++#include <malloc.h>
++#include <spi.h>
++#include <fdtdec.h>
++#include <linux/compat.h>
++#include <asm/io.h>
++#include <asm/arch/clock_manager.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++/* Register offsets */
++#define DW_SPI_CTRL0			0x00
++#define DW_SPI_CTRL1			0x04
++#define DW_SPI_SSIENR			0x08
++#define DW_SPI_MWCR			0x0c
++#define DW_SPI_SER			0x10
++#define DW_SPI_BAUDR			0x14
++#define DW_SPI_TXFLTR			0x18
++#define DW_SPI_RXFLTR			0x1c
++#define DW_SPI_TXFLR			0x20
++#define DW_SPI_RXFLR			0x24
++#define DW_SPI_SR			0x28
++#define DW_SPI_IMR			0x2c
++#define DW_SPI_ISR			0x30
++#define DW_SPI_RISR			0x34
++#define DW_SPI_TXOICR			0x38
++#define DW_SPI_RXOICR			0x3c
++#define DW_SPI_RXUICR			0x40
++#define DW_SPI_MSTICR			0x44
++#define DW_SPI_ICR			0x48
++#define DW_SPI_DMACR			0x4c
++#define DW_SPI_DMATDLR			0x50
++#define DW_SPI_DMARDLR			0x54
++#define DW_SPI_IDR			0x58
++#define DW_SPI_VERSION			0x5c
++#define DW_SPI_DR			0x60
++
++/* Bit fields in CTRLR0 */
++#define SPI_DFS_OFFSET			0
++
++#define SPI_FRF_OFFSET			4
++#define SPI_FRF_SPI			0x0
++#define SPI_FRF_SSP			0x1
++#define SPI_FRF_MICROWIRE		0x2
++#define SPI_FRF_RESV			0x3
++
++#define SPI_MODE_OFFSET			6
++#define SPI_SCPH_OFFSET			6
++#define SPI_SCOL_OFFSET			7
++
++#define SPI_TMOD_OFFSET			8
++#define SPI_TMOD_MASK			(0x3 << SPI_TMOD_OFFSET)
++#define	SPI_TMOD_TR			0x0		/* xmit & recv */
++#define SPI_TMOD_TO			0x1		/* xmit only */
++#define SPI_TMOD_RO			0x2		/* recv only */
++#define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */
++
++#define SPI_SLVOE_OFFSET		10
++#define SPI_SRL_OFFSET			11
++#define SPI_CFS_OFFSET			12
++
++/* Bit fields in SR, 7 bits */
++#define SR_MASK				0x7f		/* cover 7 bits */
++#define SR_BUSY				(1 << 0)
++#define SR_TF_NOT_FULL			(1 << 1)
++#define SR_TF_EMPT			(1 << 2)
++#define SR_RF_NOT_EMPT			(1 << 3)
++#define SR_RF_FULL			(1 << 4)
++#define SR_TX_ERR			(1 << 5)
++#define SR_DCOL				(1 << 6)
++
++#define RX_TIMEOUT			1000		/* timeout in ms */
++
++struct dw_spi_platdata {
++	s32 frequency;		/* Default clock frequency, -1 for none */
++	void __iomem *regs;
++};
++
++struct dw_spi_priv {
++	void __iomem *regs;
++	unsigned int freq;		/* Default frequency */
++	unsigned int mode;
++
++	int bits_per_word;
++	u8 cs;			/* chip select pin */
++	u8 tmode;		/* TR/TO/RO/EEPROM */
++	u8 type;		/* SPI/SSP/MicroWire */
++	int len;
++
++	u32 fifo_len;		/* depth of the FIFO buffer */
++	void *tx;
++	void *tx_end;
++	void *rx;
++	void *rx_end;
++};
++
++static inline u32 dw_readl(struct dw_spi_priv *priv, u32 offset)
++{
++	return __raw_readl(priv->regs + offset);
++}
++
++static inline void dw_writel(struct dw_spi_priv *priv, u32 offset, u32 val)
++{
++	__raw_writel(val, priv->regs + offset);
++}
++
++static inline u16 dw_readw(struct dw_spi_priv *priv, u32 offset)
++{
++	return __raw_readw(priv->regs + offset);
++}
++
++static inline void dw_writew(struct dw_spi_priv *priv, u32 offset, u16 val)
++{
++	__raw_writew(val, priv->regs + offset);
++}
++
++static int dw_spi_ofdata_to_platdata(struct udevice *bus)
++{
++	struct dw_spi_platdata *plat = bus->platdata;
++	const void *blob = gd->fdt_blob;
++	int node = bus->of_offset;
++
++	plat->regs = (struct dw_spi *)fdtdec_get_addr(blob, node, "reg");
++
++	/* Use 500KHz as a suitable default */
++	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
++					500000);
++	debug("%s: regs=%p max-frequency=%d\n", __func__, plat->regs,
++	      plat->frequency);
++
++	return 0;
++}
++
++static inline void spi_enable_chip(struct dw_spi_priv *priv, int enable)
++{
++	dw_writel(priv, DW_SPI_SSIENR, (enable ? 1 : 0));
++}
++
++/* Restart the controller, disable all interrupts, clean rx fifo */
++static void spi_hw_init(struct dw_spi_priv *priv)
++{
++	spi_enable_chip(priv, 0);
++	dw_writel(priv, DW_SPI_IMR, 0xff);
++	spi_enable_chip(priv, 1);
++
++	/*
++	 * Try to detect the FIFO depth if not set by interface driver,
++	 * the depth could be from 2 to 256 from HW spec
++	 */
++	if (!priv->fifo_len) {
++		u32 fifo;
++
++		for (fifo = 2; fifo <= 257; fifo++) {
++			dw_writew(priv, DW_SPI_TXFLTR, fifo);
++			if (fifo != dw_readw(priv, DW_SPI_TXFLTR))
++				break;
++		}
++
++		priv->fifo_len = (fifo == 257) ? 0 : fifo;
++		dw_writew(priv, DW_SPI_TXFLTR, 0);
++	}
++	debug("%s: fifo_len=%d\n", __func__, priv->fifo_len);
++}
++
++static int dw_spi_probe(struct udevice *bus)
++{
++	struct dw_spi_platdata *plat = dev_get_platdata(bus);
++	struct dw_spi_priv *priv = dev_get_priv(bus);
++
++	priv->regs = plat->regs;
++	priv->freq = plat->frequency;
++
++	/* Currently only bits_per_word == 8 supported */
++	priv->bits_per_word = 8;
++
++	priv->tmode = 0; /* Tx & Rx */
++
++	/* Basic HW init */
++	spi_hw_init(priv);
++
++	return 0;
++}
++
++/* Return the max entries we can fill into tx fifo */
++static inline u32 tx_max(struct dw_spi_priv *priv)
++{
++	u32 tx_left, tx_room, rxtx_gap;
++
++	tx_left = (priv->tx_end - priv->tx) / (priv->bits_per_word >> 3);
++	tx_room = priv->fifo_len - dw_readw(priv, DW_SPI_TXFLR);
++
++	/*
++	 * Another concern is about the tx/rx mismatch, we
++	 * thought about using (priv->fifo_len - rxflr - txflr) as
++	 * one maximum value for tx, but it doesn't cover the
++	 * data which is out of tx/rx fifo and inside the
++	 * shift registers. So a control from sw point of
++	 * view is taken.
++	 */
++	rxtx_gap = ((priv->rx_end - priv->rx) - (priv->tx_end - priv->tx)) /
++		(priv->bits_per_word >> 3);
++
++	return min3(tx_left, tx_room, (u32)(priv->fifo_len - rxtx_gap));
++}
++
++/* Return the max entries we should read out of rx fifo */
++static inline u32 rx_max(struct dw_spi_priv *priv)
++{
++	u32 rx_left = (priv->rx_end - priv->rx) / (priv->bits_per_word >> 3);
++
++	return min_t(u32, rx_left, dw_readw(priv, DW_SPI_RXFLR));
++}
++
++static void dw_writer(struct dw_spi_priv *priv)
++{
++	u32 max = tx_max(priv);
++	u16 txw = 0;
++
++	while (max--) {
++		/* Set the tx word if the transfer's original "tx" is not null */
++		if (priv->tx_end - priv->len) {
++			if (priv->bits_per_word == 8)
++				txw = *(u8 *)(priv->tx);
++			else
++				txw = *(u16 *)(priv->tx);
++		}
++		dw_writew(priv, DW_SPI_DR, txw);
++		debug("%s: tx=0x%02x\n", __func__, txw);
++		priv->tx += priv->bits_per_word >> 3;
++	}
++}
++
++static int dw_reader(struct dw_spi_priv *priv)
++{
++	unsigned start = get_timer(0);
++	u32 max;
++	u16 rxw;
++
++	/* Wait for rx data to be ready */
++	while (rx_max(priv) == 0) {
++		if (get_timer(start) > RX_TIMEOUT)
++			return -ETIMEDOUT;
++	}
++
++	max = rx_max(priv);
++
++	while (max--) {
++		rxw = dw_readw(priv, DW_SPI_DR);
++		debug("%s: rx=0x%02x\n", __func__, rxw);
++
++		/*
++		 * Care about rx only if the transfer's original "rx" is
++		 * not null
++		 */
++		if (priv->rx_end - priv->len) {
++			if (priv->bits_per_word == 8)
++				*(u8 *)(priv->rx) = rxw;
++			else
++				*(u16 *)(priv->rx) = rxw;
++		}
++		priv->rx += priv->bits_per_word >> 3;
++	}
++
++	return 0;
++}
++
++static int poll_transfer(struct dw_spi_priv *priv)
++{
++	int ret;
++
++	do {
++		dw_writer(priv);
++		ret = dw_reader(priv);
++		if (ret < 0)
++			return ret;
++	} while (priv->rx_end > priv->rx);
++
++	return 0;
++}
++
++static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen,
++		       const void *dout, void *din, unsigned long flags)
++{
++	struct udevice *bus = dev->parent;
++	struct dw_spi_priv *priv = dev_get_priv(bus);
++	const u8 *tx = dout;
++	u8 *rx = din;
++	int ret = 0;
++	u32 cr0 = 0;
++	u32 cs;
++
++	/* spi core configured to do 8 bit transfers */
++	if (bitlen % 8) {
++		debug("Non byte aligned SPI transfer.\n");
++		return -1;
++	}
++
++	cr0 = (priv->bits_per_word - 1) | (priv->type << SPI_FRF_OFFSET) |
++		(priv->mode << SPI_MODE_OFFSET) |
++		(priv->tmode << SPI_TMOD_OFFSET);
++
++	if (rx && tx)
++		priv->tmode = SPI_TMOD_TR;
++	else if (rx)
++		priv->tmode = SPI_TMOD_RO;
++	else
++		priv->tmode = SPI_TMOD_TO;
++
++	cr0 &= ~SPI_TMOD_MASK;
++	cr0 |= (priv->tmode << SPI_TMOD_OFFSET);
++
++	priv->len = bitlen >> 3;
++	debug("%s: rx=%p tx=%p len=%d [bytes]\n", __func__, rx, tx, priv->len);
++
++	priv->tx = (void *)tx;
++	priv->tx_end = priv->tx + priv->len;
++	priv->rx = rx;
++	priv->rx_end = priv->rx + priv->len;
++
++	/* Disable controller before writing control registers */
++	spi_enable_chip(priv, 0);
++
++	debug("%s: cr0=%08x\n", __func__, cr0);
++	/* Reprogram cr0 only if changed */
++	if (dw_readw(priv, DW_SPI_CTRL0) != cr0)
++		dw_writew(priv, DW_SPI_CTRL0, cr0);
++
++	/*
++	 * Configure the desired SS (slave select 0...3) in the controller
++	 * The DW SPI controller will activate and deactivate this CS
++	 * automatically. So no cs_activate() etc is needed in this driver.
++	 */
++	cs = spi_chip_select(dev);
++	dw_writel(priv, DW_SPI_SER, 1 << cs);
++
++	/* Enable controller after writing control registers */
++	spi_enable_chip(priv, 1);
++
++	/* Start transfer in a polling loop */
++	ret = poll_transfer(priv);
++
++	return ret;
++}
++
++static int dw_spi_set_speed(struct udevice *bus, uint speed)
++{
++	struct dw_spi_platdata *plat = bus->platdata;
++	struct dw_spi_priv *priv = dev_get_priv(bus);
++	u16 clk_div;
++
++	if (speed > plat->frequency)
++		speed = plat->frequency;
++
++	/* Disable controller before writing control registers */
++	spi_enable_chip(priv, 0);
++
++	/* clk_div doesn't support odd number */
++	clk_div = cm_get_spi_controller_clk_hz() / speed;
++	clk_div = (clk_div + 1) & 0xfffe;
++	dw_writel(priv, DW_SPI_BAUDR, clk_div);
++
++	/* Enable controller after writing control registers */
++	spi_enable_chip(priv, 1);
++
++	priv->freq = speed;
++	debug("%s: regs=%p speed=%d clk_div=%d\n", __func__, priv->regs,
++	      priv->freq, clk_div);
++
++	return 0;
++}
++
++static int dw_spi_set_mode(struct udevice *bus, uint mode)
++{
++	struct dw_spi_priv *priv = dev_get_priv(bus);
++
++	/*
++	 * Can't set mode yet. Since this depends on if rx, tx, or
++	 * rx & tx is requested. So we have to defer this to the
++	 * real transfer function.
++	 */
++	priv->mode = mode;
++	debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);
++
++	return 0;
++}
++
++static const struct dm_spi_ops dw_spi_ops = {
++	.xfer		= dw_spi_xfer,
++	.set_speed	= dw_spi_set_speed,
++	.set_mode	= dw_spi_set_mode,
++	/*
++	 * cs_info is not needed, since we require all chip selects to be
++	 * in the device tree explicitly
++	 */
++};
++
++static const struct udevice_id dw_spi_ids[] = {
++	{ .compatible = "snps,dw-spi-mmio" },
++	{ }
++};
++
++U_BOOT_DRIVER(dw_spi) = {
++	.name = "dw_spi",
++	.id = UCLASS_SPI,
++	.of_match = dw_spi_ids,
++	.ops = &dw_spi_ops,
++	.ofdata_to_platdata = dw_spi_ofdata_to_platdata,
++	.platdata_auto_alloc_size = sizeof(struct dw_spi_platdata),
++	.priv_auto_alloc_size = sizeof(struct dw_spi_priv),
++	.per_child_auto_alloc_size = sizeof(struct spi_slave),
++	.probe = dw_spi_probe,
++};
+diff -ruN u-boot-2015.01-rc3/drivers/spi/ich.c u-boot/drivers/spi/ich.c
+--- u-boot-2015.01-rc3/drivers/spi/ich.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/spi/ich.c	2015-01-01 17:34:32.701495908 +0100
+@@ -141,6 +141,15 @@
+ 	ich->slave.max_write_size = ctlr.databytes;
+ 	ich->speed = max_hz;
+ 
++	/*
++	 * ICH 7 SPI controller only supports array read command
++	 * and byte program command for SST flash
++	 */
++	if (ctlr.ich_version == 7) {
++		ich->slave.op_mode_rx = SPI_OPM_RX_AS;
++		ich->slave.op_mode_tx = SPI_OPM_TX_BP;
++	}
++
+ 	return &ich->slave;
+ }
+ 
+@@ -158,7 +167,8 @@
+  */
+ static int get_ich_version(uint16_t device_id)
+ {
+-	if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC)
++	if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC ||
++	    device_id == PCI_DEVICE_ID_INTEL_ITC_LPC)
+ 		return 7;
+ 
+ 	if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN &&
+@@ -483,8 +493,6 @@
+ 	struct spi_trans *trans = &ich->trans;
+ 	unsigned type = flags & (SPI_XFER_BEGIN | SPI_XFER_END);
+ 	int using_cmd = 0;
+-	/* Align read transactions to 64-byte boundaries */
+-	char buff[ctlr.databytes];
+ 
+ 	/* Ee don't support writing partial bytes. */
+ 	if (bitlen % 8) {
+@@ -632,14 +640,9 @@
+ 	 */
+ 	while (trans->bytesout || trans->bytesin) {
+ 		uint32_t data_length;
+-		uint32_t aligned_offset;
+-		uint32_t diff;
+-
+-		aligned_offset = trans->offset & ~(ctlr.databytes - 1);
+-		diff = trans->offset - aligned_offset;
+ 
+ 		/* SPI addresses are 24 bit only */
+-		ich_writel(aligned_offset & 0x00FFFFFF, ctlr.addr);
++		ich_writel(trans->offset & 0x00FFFFFF, ctlr.addr);
+ 
+ 		if (trans->bytesout)
+ 			data_length = min(trans->bytesout, ctlr.databytes);
+@@ -673,13 +676,7 @@
+ 		}
+ 
+ 		if (trans->bytesin) {
+-			if (diff) {
+-				data_length -= diff;
+-				read_reg(ctlr.data, buff, ctlr.databytes);
+-				memcpy(trans->in, buff + diff, data_length);
+-			} else {
+-				read_reg(ctlr.data, trans->in, data_length);
+-			}
++			read_reg(ctlr.data, trans->in, data_length);
+ 			spi_use_in(trans, data_length);
+ 			if (with_address)
+ 				trans->offset += data_length;
+diff -ruN u-boot-2015.01-rc3/drivers/spi/Makefile u-boot/drivers/spi/Makefile
+--- u-boot-2015.01-rc3/drivers/spi/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/spi/Makefile	2015-01-01 17:34:32.701495908 +0100
+@@ -23,9 +23,11 @@
+ obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o
+ obj-$(CONFIG_BFIN_SPI) += bfin_spi.o
+ obj-$(CONFIG_BFIN_SPI6XX) += bfin_spi6xx.o
++obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o
+ obj-$(CONFIG_CF_SPI) += cf_spi.o
+ obj-$(CONFIG_CF_QSPI) += cf_qspi.o
+ obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
++obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o
+ obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
+ obj-$(CONFIG_FTSSP010_SPI) += ftssp010_spi.o
+ obj-$(CONFIG_ICH_SPI) +=  ich.o
+diff -ruN u-boot-2015.01-rc3/drivers/thermal/imx_thermal.c u-boot/drivers/thermal/imx_thermal.c
+--- u-boot-2015.01-rc3/drivers/thermal/imx_thermal.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/thermal/imx_thermal.c	2015-01-01 17:34:32.705495842 +0100
+@@ -156,8 +156,6 @@
+ 	if (fuse == 0 || fuse == ~0) {
+ 		printf("CPU:   Thermal invalid data, fuse: 0x%x\n", fuse);
+ 		return -EPERM;
+-	} else {
+-		printf("CPU:   Thermal calibration data: 0x%x\n", fuse);
+ 	}
+ 
+ 	*priv = fuse;
+diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/atmel_usba_udc.c u-boot/drivers/usb/gadget/atmel_usba_udc.c
+--- u-boot-2015.01-rc3/drivers/usb/gadget/atmel_usba_udc.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/usb/gadget/atmel_usba_udc.c	2015-01-01 17:34:32.709495776 +0100
+@@ -1062,7 +1062,6 @@
+ 	if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
+ 		DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
+ 		receive_data(ep);
+-		usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
+ 	}
+ }
+ 
+diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/ether.c u-boot/drivers/usb/gadget/ether.c
+--- u-boot-2015.01-rc3/drivers/usb/gadget/ether.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/usb/gadget/ether.c	2015-01-01 17:34:32.709495776 +0100
+@@ -852,30 +852,6 @@
+ DEFINE_CACHE_ALIGN_BUFFER(u8, status_req, STATUS_BYTECOUNT);
+ #endif
+ 
+-
+-/**
+- * strlcpy - Copy a %NUL terminated string into a sized buffer
+- * @dest: Where to copy the string to
+- * @src: Where to copy the string from
+- * @size: size of destination buffer
+- *
+- * Compatible with *BSD: the result is always a valid
+- * NUL-terminated string that fits in the buffer (unless,
+- * of course, the buffer size is zero). It does not pad
+- * out the result like strncpy() does.
+- */
+-size_t strlcpy(char *dest, const char *src, size_t size)
+-{
+-	size_t ret = strlen(src);
+-
+-	if (size) {
+-		size_t len = (ret >= size) ? size - 1 : ret;
+-		memcpy(dest, src, len);
+-		dest[len] = '\0';
+-	}
+-	return ret;
+-}
+-
+ /*============================================================================*/
+ 
+ /*
+diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/f_dfu.c u-boot/drivers/usb/gadget/f_dfu.c
+--- u-boot-2015.01-rc3/drivers/usb/gadget/f_dfu.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/usb/gadget/f_dfu.c	2015-01-01 17:34:32.709495776 +0100
+@@ -366,7 +366,7 @@
+ 		to_runtime_mode(f_dfu);
+ 		f_dfu->dfu_state = DFU_STATE_appIDLE;
+ 
+-		dfu_trigger_detach();
++		g_dnl_trigger_detach();
+ 		break;
+ 	default:
+ 		f_dfu->dfu_state = DFU_STATE_dfuERROR;
+diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/f_fastboot.c u-boot/drivers/usb/gadget/f_fastboot.c
+--- u-boot-2015.01-rc3/drivers/usb/gadget/f_fastboot.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/usb/gadget/f_fastboot.c	2015-01-01 17:34:32.709495776 +0100
+@@ -480,6 +480,17 @@
+ 	fastboot_tx_write_str("OKAY");
+ }
+ 
++static void do_exit_on_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	g_dnl_trigger_detach();
++}
++
++static void cb_continue(struct usb_ep *ep, struct usb_request *req)
++{
++	fastboot_func->in_req->complete = do_exit_on_complete;
++	fastboot_tx_write_str("OKAY");
++}
++
+ #ifdef CONFIG_FASTBOOT_FLASH
+ static void cb_flash(struct usb_ep *ep, struct usb_request *req)
+ {
+@@ -520,6 +531,9 @@
+ 	}, {
+ 		.cmd = "boot",
+ 		.cb = cb_boot,
++	}, {
++		.cmd = "continue",
++		.cb = cb_continue,
+ 	},
+ #ifdef CONFIG_FASTBOOT_FLASH
+ 	{
+diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/f_thor.c u-boot/drivers/usb/gadget/f_thor.c
+--- u-boot-2015.01-rc3/drivers/usb/gadget/f_thor.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/usb/gadget/f_thor.c	2015-01-01 17:34:32.709495776 +0100
+@@ -205,12 +205,24 @@
+ 
+ static int download_tail(long long int left, int cnt)
+ {
+-	struct dfu_entity *dfu_entity = dfu_get_entity(alt_setting_num);
+-	void *transfer_buffer = dfu_get_buf(dfu_entity);
++	struct dfu_entity *dfu_entity;
++	void *transfer_buffer;
+ 	int ret;
+ 
+ 	debug("%s: left: %llu cnt: %d\n", __func__, left, cnt);
+ 
++	dfu_entity = dfu_get_entity(alt_setting_num);
++	if (!dfu_entity) {
++		error("Alt setting: %d entity not found!\n", alt_setting_num);
++		return -ENOENT;
++	}
++
++	transfer_buffer = dfu_get_buf(dfu_entity);
++	if (!transfer_buffer) {
++		error("Transfer buffer not allocated!");
++		return -ENXIO;
++	}
++
+ 	if (left) {
+ 		ret = dfu_write(dfu_entity, transfer_buffer, left, cnt++);
+ 		if (ret) {
+diff -ruN u-boot-2015.01-rc3/drivers/usb/gadget/g_dnl.c u-boot/drivers/usb/gadget/g_dnl.c
+--- u-boot-2015.01-rc3/drivers/usb/gadget/g_dnl.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/usb/gadget/g_dnl.c	2015-01-01 17:34:32.709495776 +0100
+@@ -163,6 +163,23 @@
+ 	return -EOPNOTSUPP;
+ }
+ 
++static bool g_dnl_detach_request;
++
++bool g_dnl_detach(void)
++{
++	return g_dnl_detach_request;
++}
++
++void g_dnl_trigger_detach(void)
++{
++	g_dnl_detach_request = true;
++}
++
++void g_dnl_clear_detach(void)
++{
++	g_dnl_detach_request = false;
++}
++
+ static int g_dnl_get_bcd_device_number(struct usb_composite_dev *cdev)
+ {
+ 	struct usb_gadget *gadget = cdev->gadget;
+diff -ruN u-boot-2015.01-rc3/drivers/usb/host/ehci-fsl.c u-boot/drivers/usb/host/ehci-fsl.c
+--- u-boot-2015.01-rc3/drivers/usb/host/ehci-fsl.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/usb/host/ehci-fsl.c	2015-01-01 17:34:32.713495710 +0100
+@@ -15,9 +15,14 @@
+ #include <usb/ehci-fsl.h>
+ #include <hwconfig.h>
+ #include <fsl_usb.h>
++#include <fdt_support.h>
+ 
+ #include "ehci.h"
+ 
++#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
++#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
++#endif
++
+ static void set_txfifothresh(struct usb_ehci *, u32);
+ 
+ /* Check USB PHY clock valid */
+@@ -158,3 +163,184 @@
+ 	cmd |= TXFIFO_THRESH(txfifo_thresh);
+ 	ehci_writel(&ehci->txfilltuning, cmd);
+ }
++
++#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
++static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
++				       const char *phy_type, int start_offset)
++{
++	const char *compat_dr = "fsl-usb2-dr";
++	const char *compat_mph = "fsl-usb2-mph";
++	const char *prop_mode = "dr_mode";
++	const char *prop_type = "phy_type";
++	const char *node_type = NULL;
++	int node_offset;
++	int err;
++
++	node_offset = fdt_node_offset_by_compatible(blob,
++						    start_offset, compat_mph);
++	if (node_offset < 0) {
++		node_offset = fdt_node_offset_by_compatible(blob,
++							    start_offset,
++							    compat_dr);
++		if (node_offset < 0) {
++			printf("WARNING: could not find compatible node: %s",
++			       fdt_strerror(node_offset));
++			return -1;
++		}
++		node_type = compat_dr;
++	} else {
++		node_type = compat_mph;
++	}
++
++	if (mode) {
++		err = fdt_setprop(blob, node_offset, prop_mode, mode,
++				  strlen(mode) + 1);
++		if (err < 0)
++			printf("WARNING: could not set %s for %s: %s.\n",
++			       prop_mode, node_type, fdt_strerror(err));
++	}
++
++	if (phy_type) {
++		err = fdt_setprop(blob, node_offset, prop_type, phy_type,
++				  strlen(phy_type) + 1);
++		if (err < 0)
++			printf("WARNING: could not set %s for %s: %s.\n",
++			       prop_type, node_type, fdt_strerror(err));
++	}
++
++	return node_offset;
++}
++
++static const char *fdt_usb_get_node_type(void *blob, int start_offset,
++					 int *node_offset)
++{
++	const char *compat_dr = "fsl-usb2-dr";
++	const char *compat_mph = "fsl-usb2-mph";
++	const char *node_type = NULL;
++
++	*node_offset = fdt_node_offset_by_compatible(blob, start_offset,
++						     compat_mph);
++	if (*node_offset < 0) {
++		*node_offset = fdt_node_offset_by_compatible(blob,
++							     start_offset,
++							     compat_dr);
++		if (*node_offset < 0) {
++			printf("ERROR: could not find compatible node: %s\n",
++			       fdt_strerror(*node_offset));
++		} else {
++			node_type = compat_dr;
++		}
++	} else {
++		node_type = compat_mph;
++	}
++
++	return node_type;
++}
++
++static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
++				 int start_offset)
++{
++	int node_offset, err;
++	const char *node_type = NULL;
++
++	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
++	if (!node_type)
++		return -1;
++
++	err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
++	if (err < 0) {
++		printf("ERROR: could not set %s for %s: %s.\n",
++		       prop_erratum, node_type, fdt_strerror(err));
++	}
++
++	return node_offset;
++}
++
++void fdt_fixup_dr_usb(void *blob, bd_t *bd)
++{
++	static const char * const modes[] = { "host", "peripheral", "otg" };
++	static const char * const phys[] = { "ulpi", "utmi" };
++	int usb_erratum_a006261_off = -1;
++	int usb_erratum_a007075_off = -1;
++	int usb_erratum_a007792_off = -1;
++	int usb_mode_off = -1;
++	int usb_phy_off = -1;
++	char str[5];
++	int i, j;
++
++	for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
++		const char *dr_mode_type = NULL;
++		const char *dr_phy_type = NULL;
++		int mode_idx = -1, phy_idx = -1;
++
++		snprintf(str, 5, "%s%d", "usb", i);
++		if (hwconfig(str)) {
++			for (j = 0; j < ARRAY_SIZE(modes); j++) {
++				if (hwconfig_subarg_cmp(str, "dr_mode",
++							modes[j])) {
++					mode_idx = j;
++					break;
++				}
++			}
++
++			for (j = 0; j < ARRAY_SIZE(phys); j++) {
++				if (hwconfig_subarg_cmp(str, "phy_type",
++							phys[j])) {
++					phy_idx = j;
++					break;
++				}
++			}
++
++			if (mode_idx < 0 && phy_idx < 0) {
++				printf("WARNING: invalid phy or mode\n");
++				return;
++			}
++
++			if (mode_idx > -1)
++				dr_mode_type = modes[mode_idx];
++
++			if (phy_idx > -1)
++				dr_phy_type = phys[phy_idx];
++		}
++
++		usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
++							   dr_mode_type, NULL,
++							   usb_mode_off);
++
++		if (usb_mode_off < 0)
++			return;
++
++		usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
++							  NULL, dr_phy_type,
++							  usb_phy_off);
++
++		if (usb_phy_off < 0)
++			return;
++
++		if (has_erratum_a006261()) {
++			usb_erratum_a006261_off =  fdt_fixup_usb_erratum
++						   (blob,
++						    "fsl,usb-erratum-a006261",
++						    usb_erratum_a006261_off);
++			if (usb_erratum_a006261_off < 0)
++				return;
++		}
++		if (has_erratum_a007075()) {
++			usb_erratum_a007075_off =  fdt_fixup_usb_erratum
++						   (blob,
++						    "fsl,usb-erratum-a007075",
++						    usb_erratum_a007075_off);
++			if (usb_erratum_a007075_off < 0)
++				return;
++		}
++		if (has_erratum_a007792()) {
++			usb_erratum_a007792_off =  fdt_fixup_usb_erratum
++						   (blob,
++						    "fsl,usb-erratum-a007792",
++						    usb_erratum_a007792_off);
++			if (usb_erratum_a007792_off < 0)
++				return;
++		}
++	}
++}
++#endif
+diff -ruN u-boot-2015.01-rc3/drivers/usb/host/ehci-hcd.c u-boot/drivers/usb/host/ehci-hcd.c
+--- u-boot-2015.01-rc3/drivers/usb/host/ehci-hcd.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/usb/host/ehci-hcd.c	2015-01-01 17:34:32.713495710 +0100
+@@ -971,7 +971,6 @@
+ 	qh_list->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH);
+ 	qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) |
+ 						QH_ENDPT1_EPS(USB_SPEED_HIGH));
+-	qh_list->qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE);
+ 	qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+ 	qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+ 	qh_list->qh_overlay.qt_token =
+diff -ruN u-boot-2015.01-rc3/drivers/usb/host/ehci-mx6.c u-boot/drivers/usb/host/ehci-mx6.c
+--- u-boot-2015.01-rc3/drivers/usb/host/ehci-mx6.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/drivers/usb/host/ehci-mx6.c	2015-01-01 17:34:32.713495710 +0100
+@@ -160,7 +160,7 @@
+ 	val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
+ 	__raw_writel(val, phy_ctrl);
+ 
+-	return val & USBPHY_CTRL_OTG_ID;
++	return 0;
+ }
+ 
+ /* Base address for this IP block is 0x02184800 */
+@@ -193,6 +193,28 @@
+ 	__raw_writel(val, ctrl);
+ }
+ 
++int usb_phy_mode(int port)
++{
++	void __iomem *phy_reg;
++	void __iomem *phy_ctrl;
++	u32 val;
++
++	phy_reg = (void __iomem *)phy_bases[port];
++	phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
++
++	val = __raw_readl(phy_ctrl);
++
++	if (val & USBPHY_CTRL_OTG_ID)
++		return USB_INIT_DEVICE;
++	else
++		return USB_INIT_HOST;
++}
++
++int __weak board_usb_phy_mode(int port)
++{
++	return usb_phy_mode(port);
++}
++
+ int __weak board_ehci_hcd_init(int port)
+ {
+ 	return 0;
+@@ -221,7 +243,8 @@
+ 	usb_power_config(index);
+ 	usb_oc_config(index);
+ 	usb_internal_phy_clock_gate(index, 1);
+-	type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE : USB_INIT_HOST;
++	usb_phy_enable(index, ehci);
++	type = board_usb_phy_mode(index);
+ 
+ 	*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+ 	*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
+diff -ruN u-boot-2015.01-rc3/.git/config u-boot/.git/config
+--- u-boot-2015.01-rc3/.git/config	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/config	2015-01-01 17:34:31.953508170 +0100
+@@ -0,0 +1,11 @@
++[core]
++	repositoryformatversion = 0
++	filemode = true
++	bare = false
++	logallrefupdates = true
++[remote "origin"]
++	fetch = +refs/heads/*:refs/remotes/origin/*
++	url = git://git.denx.de/u-boot.git
++[branch "master"]
++	remote = origin
++	merge = refs/heads/master
+diff -ruN u-boot-2015.01-rc3/.git/description u-boot/.git/description
+--- u-boot-2015.01-rc3/.git/description	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/description	2015-01-01 17:34:05.785937163 +0100
+@@ -0,0 +1 @@
++Unnamed repository; edit this file 'description' to name the repository.
+diff -ruN u-boot-2015.01-rc3/.git/HEAD u-boot/.git/HEAD
+--- u-boot-2015.01-rc3/.git/HEAD	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/HEAD	2015-01-01 17:34:31.953508170 +0100
+@@ -0,0 +1 @@
++ref: refs/heads/master
+diff -ruN u-boot-2015.01-rc3/.git/hooks/applypatch-msg.sample u-boot/.git/hooks/applypatch-msg.sample
+--- u-boot-2015.01-rc3/.git/hooks/applypatch-msg.sample	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/hooks/applypatch-msg.sample	2015-01-01 17:34:05.793937033 +0100
+@@ -0,0 +1,15 @@
++#!/bin/sh
++#
++# An example hook script to check the commit log message taken by
++# applypatch from an e-mail message.
++#
++# The hook should exit with non-zero status after issuing an
++# appropriate message if it wants to stop the commit.  The hook is
++# allowed to edit the commit message file.
++#
++# To enable this hook, rename this file to "applypatch-msg".
++
++. git-sh-setup
++test -x "$GIT_DIR/hooks/commit-msg" &&
++	exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"}
++:
+diff -ruN u-boot-2015.01-rc3/.git/hooks/commit-msg.sample u-boot/.git/hooks/commit-msg.sample
+--- u-boot-2015.01-rc3/.git/hooks/commit-msg.sample	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/hooks/commit-msg.sample	2015-01-01 17:34:05.793937033 +0100
+@@ -0,0 +1,24 @@
++#!/bin/sh
++#
++# An example hook script to check the commit log message.
++# Called by "git commit" with one argument, the name of the file
++# that has the commit message.  The hook should exit with non-zero
++# status after issuing an appropriate message if it wants to stop the
++# commit.  The hook is allowed to edit the commit message file.
++#
++# To enable this hook, rename this file to "commit-msg".
++
++# Uncomment the below to add a Signed-off-by line to the message.
++# Doing this in a hook is a bad idea in general, but the prepare-commit-msg
++# hook is more suited to it.
++#
++# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
++# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
++
++# This example catches duplicate Signed-off-by lines.
++
++test "" = "$(grep '^Signed-off-by: ' "$1" |
++	 sort | uniq -c | sed -e '/^[ 	]*1[ 	]/d')" || {
++	echo >&2 Duplicate Signed-off-by lines.
++	exit 1
++}
+diff -ruN u-boot-2015.01-rc3/.git/hooks/post-update.sample u-boot/.git/hooks/post-update.sample
+--- u-boot-2015.01-rc3/.git/hooks/post-update.sample	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/hooks/post-update.sample	2015-01-01 17:34:05.797936967 +0100
+@@ -0,0 +1,8 @@
++#!/bin/sh
++#
++# An example hook script to prepare a packed repository for use over
++# dumb transports.
++#
++# To enable this hook, rename this file to "post-update".
++
++exec git update-server-info
+diff -ruN u-boot-2015.01-rc3/.git/hooks/pre-applypatch.sample u-boot/.git/hooks/pre-applypatch.sample
+--- u-boot-2015.01-rc3/.git/hooks/pre-applypatch.sample	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/hooks/pre-applypatch.sample	2015-01-01 17:34:05.793937033 +0100
+@@ -0,0 +1,14 @@
++#!/bin/sh
++#
++# An example hook script to verify what is about to be committed
++# by applypatch from an e-mail message.
++#
++# The hook should exit with non-zero status after issuing an
++# appropriate message if it wants to stop the commit.
++#
++# To enable this hook, rename this file to "pre-applypatch".
++
++. git-sh-setup
++test -x "$GIT_DIR/hooks/pre-commit" &&
++	exec "$GIT_DIR/hooks/pre-commit" ${1+"$@"}
++:
+diff -ruN u-boot-2015.01-rc3/.git/hooks/pre-commit.sample u-boot/.git/hooks/pre-commit.sample
+--- u-boot-2015.01-rc3/.git/hooks/pre-commit.sample	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/hooks/pre-commit.sample	2015-01-01 17:34:05.793937033 +0100
+@@ -0,0 +1,50 @@
++#!/bin/sh
++#
++# An example hook script to verify what is about to be committed.
++# Called by "git commit" with no arguments.  The hook should
++# exit with non-zero status after issuing an appropriate message if
++# it wants to stop the commit.
++#
++# To enable this hook, rename this file to "pre-commit".
++
++if git rev-parse --verify HEAD >/dev/null 2>&1
++then
++	against=HEAD
++else
++	# Initial commit: diff against an empty tree object
++	against=4b825dc642cb6eb9a060e54bf8d69288fbee4904
++fi
++
++# If you want to allow non-ascii filenames set this variable to true.
++allownonascii=$(git config hooks.allownonascii)
++
++# Redirect output to stderr.
++exec 1>&2
++
++# Cross platform projects tend to avoid non-ascii filenames; prevent
++# them from being added to the repository. We exploit the fact that the
++# printable range starts at the space character and ends with tilde.
++if [ "$allownonascii" != "true" ] &&
++	# Note that the use of brackets around a tr range is ok here, (it's
++	# even required, for portability to Solaris 10's /usr/bin/tr), since
++	# the square bracket bytes happen to fall in the designated range.
++	test $(git diff --cached --name-only --diff-filter=A -z $against |
++	  LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0
++then
++	echo "Error: Attempt to add a non-ascii file name."
++	echo
++	echo "This can cause problems if you want to work"
++	echo "with people on other platforms."
++	echo
++	echo "To be portable it is advisable to rename the file ..."
++	echo
++	echo "If you know what you are doing you can disable this"
++	echo "check using:"
++	echo
++	echo "  git config hooks.allownonascii true"
++	echo
++	exit 1
++fi
++
++# If there are whitespace errors, print the offending file names and fail.
++exec git diff-index --check --cached $against --
+diff -ruN u-boot-2015.01-rc3/.git/hooks/prepare-commit-msg.sample u-boot/.git/hooks/prepare-commit-msg.sample
+--- u-boot-2015.01-rc3/.git/hooks/prepare-commit-msg.sample	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/hooks/prepare-commit-msg.sample	2015-01-01 17:34:05.801936901 +0100
+@@ -0,0 +1,36 @@
++#!/bin/sh
++#
++# An example hook script to prepare the commit log message.
++# Called by "git commit" with the name of the file that has the
++# commit message, followed by the description of the commit
++# message's source.  The hook's purpose is to edit the commit
++# message file.  If the hook fails with a non-zero status,
++# the commit is aborted.
++#
++# To enable this hook, rename this file to "prepare-commit-msg".
++
++# This hook includes three examples.  The first comments out the
++# "Conflicts:" part of a merge commit.
++#
++# The second includes the output of "git diff --name-status -r"
++# into the message, just before the "git status" output.  It is
++# commented because it doesn't cope with --amend or with squashed
++# commits.
++#
++# The third example adds a Signed-off-by line to the message, that can
++# still be edited.  This is rarely a good idea.
++
++case "$2,$3" in
++  merge,)
++    /usr/bin/perl -i.bak -ne 's/^/# /, s/^# #/#/ if /^Conflicts/ .. /#/; print' "$1" ;;
++
++# ,|template,)
++#   /usr/bin/perl -i.bak -pe '
++#      print "\n" . `git diff --cached --name-status -r`
++#	 if /^#/ && $first++ == 0' "$1" ;;
++
++  *) ;;
++esac
++
++# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
++# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
+diff -ruN u-boot-2015.01-rc3/.git/hooks/pre-rebase.sample u-boot/.git/hooks/pre-rebase.sample
+--- u-boot-2015.01-rc3/.git/hooks/pre-rebase.sample	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/hooks/pre-rebase.sample	2015-01-01 17:34:05.801936901 +0100
+@@ -0,0 +1,169 @@
++#!/bin/sh
++#
++# Copyright (c) 2006, 2008 Junio C Hamano
++#
++# The "pre-rebase" hook is run just before "git rebase" starts doing
++# its job, and can prevent the command from running by exiting with
++# non-zero status.
++#
++# The hook is called with the following parameters:
++#
++# $1 -- the upstream the series was forked from.
++# $2 -- the branch being rebased (or empty when rebasing the current branch).
++#
++# This sample shows how to prevent topic branches that are already
++# merged to 'next' branch from getting rebased, because allowing it
++# would result in rebasing already published history.
++
++publish=next
++basebranch="$1"
++if test "$#" = 2
++then
++	topic="refs/heads/$2"
++else
++	topic=`git symbolic-ref HEAD` ||
++	exit 0 ;# we do not interrupt rebasing detached HEAD
++fi
++
++case "$topic" in
++refs/heads/??/*)
++	;;
++*)
++	exit 0 ;# we do not interrupt others.
++	;;
++esac
++
++# Now we are dealing with a topic branch being rebased
++# on top of master.  Is it OK to rebase it?
++
++# Does the topic really exist?
++git show-ref -q "$topic" || {
++	echo >&2 "No such branch $topic"
++	exit 1
++}
++
++# Is topic fully merged to master?
++not_in_master=`git rev-list --pretty=oneline ^master "$topic"`
++if test -z "$not_in_master"
++then
++	echo >&2 "$topic is fully merged to master; better remove it."
++	exit 1 ;# we could allow it, but there is no point.
++fi
++
++# Is topic ever merged to next?  If so you should not be rebasing it.
++only_next_1=`git rev-list ^master "^$topic" ${publish} | sort`
++only_next_2=`git rev-list ^master           ${publish} | sort`
++if test "$only_next_1" = "$only_next_2"
++then
++	not_in_topic=`git rev-list "^$topic" master`
++	if test -z "$not_in_topic"
++	then
++		echo >&2 "$topic is already up-to-date with master"
++		exit 1 ;# we could allow it, but there is no point.
++	else
++		exit 0
++	fi
++else
++	not_in_next=`git rev-list --pretty=oneline ^${publish} "$topic"`
++	/usr/bin/perl -e '
++		my $topic = $ARGV[0];
++		my $msg = "* $topic has commits already merged to public branch:\n";
++		my (%not_in_next) = map {
++			/^([0-9a-f]+) /;
++			($1 => 1);
++		} split(/\n/, $ARGV[1]);
++		for my $elem (map {
++				/^([0-9a-f]+) (.*)$/;
++				[$1 => $2];
++			} split(/\n/, $ARGV[2])) {
++			if (!exists $not_in_next{$elem->[0]}) {
++				if ($msg) {
++					print STDERR $msg;
++					undef $msg;
++				}
++				print STDERR " $elem->[1]\n";
++			}
++		}
++	' "$topic" "$not_in_next" "$not_in_master"
++	exit 1
++fi
++
++<<\DOC_END
++
++This sample hook safeguards topic branches that have been
++published from being rewound.
++
++The workflow assumed here is:
++
++ * Once a topic branch forks from "master", "master" is never
++   merged into it again (either directly or indirectly).
++
++ * Once a topic branch is fully cooked and merged into "master",
++   it is deleted.  If you need to build on top of it to correct
++   earlier mistakes, a new topic branch is created by forking at
++   the tip of the "master".  This is not strictly necessary, but
++   it makes it easier to keep your history simple.
++
++ * Whenever you need to test or publish your changes to topic
++   branches, merge them into "next" branch.
++
++The script, being an example, hardcodes the publish branch name
++to be "next", but it is trivial to make it configurable via
++$GIT_DIR/config mechanism.
++
++With this workflow, you would want to know:
++
++(1) ... if a topic branch has ever been merged to "next".  Young
++    topic branches can have stupid mistakes you would rather
++    clean up before publishing, and things that have not been
++    merged into other branches can be easily rebased without
++    affecting other people.  But once it is published, you would
++    not want to rewind it.
++
++(2) ... if a topic branch has been fully merged to "master".
++    Then you can delete it.  More importantly, you should not
++    build on top of it -- other people may already want to
++    change things related to the topic as patches against your
++    "master", so if you need further changes, it is better to
++    fork the topic (perhaps with the same name) afresh from the
++    tip of "master".
++
++Let's look at this example:
++
++		   o---o---o---o---o---o---o---o---o---o "next"
++		  /       /           /           /
++		 /   a---a---b A     /           /
++		/   /               /           /
++	       /   /   c---c---c---c B         /
++	      /   /   /             \         /
++	     /   /   /   b---b C     \       /
++	    /   /   /   /             \     /
++    ---o---o---o---o---o---o---o---o---o---o---o "master"
++
++
++A, B and C are topic branches.
++
++ * A has one fix since it was merged up to "next".
++
++ * B has finished.  It has been fully merged up to "master" and "next",
++   and is ready to be deleted.
++
++ * C has not merged to "next" at all.
++
++We would want to allow C to be rebased, refuse A, and encourage
++B to be deleted.
++
++To compute (1):
++
++	git rev-list ^master ^topic next
++	git rev-list ^master        next
++
++	if these match, topic has not merged in next at all.
++
++To compute (2):
++
++	git rev-list master..topic
++
++	if this is empty, it is fully merged to "master".
++
++DOC_END
+diff -ruN u-boot-2015.01-rc3/.git/hooks/update.sample u-boot/.git/hooks/update.sample
+--- u-boot-2015.01-rc3/.git/hooks/update.sample	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/hooks/update.sample	2015-01-01 17:34:05.793937033 +0100
+@@ -0,0 +1,128 @@
++#!/bin/sh
++#
++# An example hook script to blocks unannotated tags from entering.
++# Called by "git receive-pack" with arguments: refname sha1-old sha1-new
++#
++# To enable this hook, rename this file to "update".
++#
++# Config
++# ------
++# hooks.allowunannotated
++#   This boolean sets whether unannotated tags will be allowed into the
++#   repository.  By default they won't be.
++# hooks.allowdeletetag
++#   This boolean sets whether deleting tags will be allowed in the
++#   repository.  By default they won't be.
++# hooks.allowmodifytag
++#   This boolean sets whether a tag may be modified after creation. By default
++#   it won't be.
++# hooks.allowdeletebranch
++#   This boolean sets whether deleting branches will be allowed in the
++#   repository.  By default they won't be.
++# hooks.denycreatebranch
++#   This boolean sets whether remotely creating branches will be denied
++#   in the repository.  By default this is allowed.
++#
++
++# --- Command line
++refname="$1"
++oldrev="$2"
++newrev="$3"
++
++# --- Safety check
++if [ -z "$GIT_DIR" ]; then
++	echo "Don't run this script from the command line." >&2
++	echo " (if you want, you could supply GIT_DIR then run" >&2
++	echo "  $0 <ref> <oldrev> <newrev>)" >&2
++	exit 1
++fi
++
++if [ -z "$refname" -o -z "$oldrev" -o -z "$newrev" ]; then
++	echo "Usage: $0 <ref> <oldrev> <newrev>" >&2
++	exit 1
++fi
++
++# --- Config
++allowunannotated=$(git config --bool hooks.allowunannotated)
++allowdeletebranch=$(git config --bool hooks.allowdeletebranch)
++denycreatebranch=$(git config --bool hooks.denycreatebranch)
++allowdeletetag=$(git config --bool hooks.allowdeletetag)
++allowmodifytag=$(git config --bool hooks.allowmodifytag)
++
++# check for no description
++projectdesc=$(sed -e '1q' "$GIT_DIR/description")
++case "$projectdesc" in
++"Unnamed repository"* | "")
++	echo "*** Project description file hasn't been set" >&2
++	exit 1
++	;;
++esac
++
++# --- Check types
++# if $newrev is 0000...0000, it's a commit to delete a ref.
++zero="0000000000000000000000000000000000000000"
++if [ "$newrev" = "$zero" ]; then
++	newrev_type=delete
++else
++	newrev_type=$(git cat-file -t $newrev)
++fi
++
++case "$refname","$newrev_type" in
++	refs/tags/*,commit)
++		# un-annotated tag
++		short_refname=${refname##refs/tags/}
++		if [ "$allowunannotated" != "true" ]; then
++			echo "*** The un-annotated tag, $short_refname, is not allowed in this repository" >&2
++			echo "*** Use 'git tag [ -a | -s ]' for tags you want to propagate." >&2
++			exit 1
++		fi
++		;;
++	refs/tags/*,delete)
++		# delete tag
++		if [ "$allowdeletetag" != "true" ]; then
++			echo "*** Deleting a tag is not allowed in this repository" >&2
++			exit 1
++		fi
++		;;
++	refs/tags/*,tag)
++		# annotated tag
++		if [ "$allowmodifytag" != "true" ] && git rev-parse $refname > /dev/null 2>&1
++		then
++			echo "*** Tag '$refname' already exists." >&2
++			echo "*** Modifying a tag is not allowed in this repository." >&2
++			exit 1
++		fi
++		;;
++	refs/heads/*,commit)
++		# branch
++		if [ "$oldrev" = "$zero" -a "$denycreatebranch" = "true" ]; then
++			echo "*** Creating a branch is not allowed in this repository" >&2
++			exit 1
++		fi
++		;;
++	refs/heads/*,delete)
++		# delete branch
++		if [ "$allowdeletebranch" != "true" ]; then
++			echo "*** Deleting a branch is not allowed in this repository" >&2
++			exit 1
++		fi
++		;;
++	refs/remotes/*,commit)
++		# tracking branch
++		;;
++	refs/remotes/*,delete)
++		# delete tracking branch
++		if [ "$allowdeletebranch" != "true" ]; then
++			echo "*** Deleting a tracking branch is not allowed in this repository" >&2
++			exit 1
++		fi
++		;;
++	*)
++		# Anything else (is there anything else?)
++		echo "*** Update hook: unknown type of update to ref $refname of type $newrev_type" >&2
++		exit 1
++		;;
++esac
++
++# --- Finished
++exit 0
+Binary files u-boot-2015.01-rc3/.git/index and u-boot/.git/index differ
+diff -ruN u-boot-2015.01-rc3/.git/info/exclude u-boot/.git/info/exclude
+--- u-boot-2015.01-rc3/.git/info/exclude	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/info/exclude	2015-01-01 17:34:05.789937097 +0100
+@@ -0,0 +1,6 @@
++# git ls-files --others --exclude-from=.git/info/exclude
++# Lines that start with '#' are comments.
++# For a project mostly in C, the following would be a good set of
++# exclude patterns (uncomment them if you want to use them):
++# *.[oa]
++# *~
+diff -ruN u-boot-2015.01-rc3/.git/logs/HEAD u-boot/.git/logs/HEAD
+--- u-boot-2015.01-rc3/.git/logs/HEAD	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/logs/HEAD	2015-01-01 17:34:31.953508170 +0100
+@@ -0,0 +1 @@
++0000000000000000000000000000000000000000 125738e819a3b9d15210794b3dcef9f4d9bcf866 Zoltan HERPAI <wigyori@uid0.hu> 1420130071 +0100	clone: from git://git.denx.de/u-boot.git
+diff -ruN u-boot-2015.01-rc3/.git/logs/refs/heads/master u-boot/.git/logs/refs/heads/master
+--- u-boot-2015.01-rc3/.git/logs/refs/heads/master	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/logs/refs/heads/master	2015-01-01 17:34:31.953508170 +0100
+@@ -0,0 +1 @@
++0000000000000000000000000000000000000000 125738e819a3b9d15210794b3dcef9f4d9bcf866 Zoltan HERPAI <wigyori@uid0.hu> 1420130071 +0100	clone: from git://git.denx.de/u-boot.git
+diff -ruN u-boot-2015.01-rc3/.git/logs/refs/remotes/origin/HEAD u-boot/.git/logs/refs/remotes/origin/HEAD
+--- u-boot-2015.01-rc3/.git/logs/refs/remotes/origin/HEAD	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/logs/refs/remotes/origin/HEAD	2015-01-01 17:34:31.953508170 +0100
+@@ -0,0 +1 @@
++0000000000000000000000000000000000000000 125738e819a3b9d15210794b3dcef9f4d9bcf866 Zoltan HERPAI <wigyori@uid0.hu> 1420130071 +0100	clone: from git://git.denx.de/u-boot.git
+Binary files u-boot-2015.01-rc3/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.idx and u-boot/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.idx differ
+Binary files u-boot-2015.01-rc3/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.pack and u-boot/.git/objects/pack/pack-e62dd83e4128e234ff5dabb586722d23d1bae06c.pack differ
+diff -ruN u-boot-2015.01-rc3/.git/packed-refs u-boot/.git/packed-refs
+--- u-boot-2015.01-rc3/.git/packed-refs	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/packed-refs	2015-01-01 17:34:31.865509612 +0100
+@@ -0,0 +1,388 @@
++# pack-refs with: peeled 
++125738e819a3b9d15210794b3dcef9f4d9bcf866 refs/remotes/origin/master
++ece0d370144fdecb6f3ed5738ffe96f5b12f9e96 refs/remotes/origin/next
++cd5b2b9941d5b6f6596787ebdb03c215d91fc44d refs/remotes/origin/origin
++f20393c5e787b3776c179d20f82a86bda124d651 refs/remotes/origin/u-boot-2009.11.y
++e8ae0fa5edd152b2b29c470b88429be4cdcd2c46 refs/remotes/origin/u-boot-2013.01.y
++be360d9824d653780ebd3ffc08f1938a8e3dd747 refs/tags/DENX-2005-10-29-2350
++384ae02506f0673070a3516b1858f058a07f85f3 refs/tags/LABEL_2002_11_05_0120
++56f94be3ef63732384063e110277ed89701b6471 refs/tags/LABEL_2002_11_05_1735
++7f6c2cbc2bc0721c41bb776242c0b18ec70328e4 refs/tags/LABEL_2002_11_10_2310
++1d0350ed0b1b0f63e3fb5db6b19397b84a2ea1c7 refs/tags/LABEL_2002_11_11_2211
++2262cfeef91458b01a1bfe3812ccbbfdf8b82807 refs/tags/LABEL_2002_11_18_0115
++ea909b7604306a400ee3abf57e2fa7b2dde5dde1 refs/tags/LABEL_2002_11_22_0015
++a6c7ad2f65afaa717ba19cbf9d8d138b5f10ccf9 refs/tags/LABEL_2002_12_03_2230
++7c7a23bd5a0bc149d2edd665ec46381726b24e0c refs/tags/LABEL_2002_12_07_0120
++288b3d7f5a54c987ecdfc5add4c7c25d36a9a3e1 refs/tags/LABEL_2002_12_21_0040
++13122b4f1d6d00d6d4993ef56d9b5c5bd24f431e refs/tags/LABEL_2002_12_28_1700
++d0fb80c3021e15853895e9ae45ab9368d0fb52fa refs/tags/LABEL_2003_01_11_1050
++608c91460b37fd9fe0088a0ce813a443f116a8d5 refs/tags/LABEL_2003_01_14_0055
++6069ff265362ef6239749b5f598b137f407b821e refs/tags/LABEL_2003_02_28_0150
++43d9616cffb4a130e1620e3e33fc9bc1bcabe399 refs/tags/LABEL_2003_03_06_0050
++db2f721ffcf9693086a7e5c6c7015f2019e7f52e refs/tags/LABEL_2003_03_06_0200
++500545cc6b83958209128bffa825b3c842a21a4e refs/tags/LABEL_2003_03_06_1440
++1cb8e980c41e86760fa93de63f4e4cf643bef9d9 refs/tags/LABEL_2003_03_06_2255
++1957dd29d980ecb197c3a6dbe4f6609dae135a1d refs/tags/LABEL_2003_03_14_2150
++10f670178cce29d7f078ca622f0eeafd6903748a refs/tags/LABEL_2003_03_25_1830
++ac6dbb85b7f080d923013bff4e1d5267cb6f8a5a refs/tags/LABEL_2003_03_26_1300
++cdd8a0f1517b89349265465bf334db32e2304b45 refs/tags/LABEL_2003_03_27_1900
++3e38691e8f7aa0d9b498d76c7279ddec6e4946f3 refs/tags/LABEL_2003_04_05_0300
++4a6fd34b267dbf4a72080ab9a085bb45c63660fb refs/tags/LABEL_2003_04_15_1900
++7aa78614716b7bd7bdf68553f261ad0d5a12826a refs/tags/LABEL_2003_05_03_1700
++45219c46605f9b933ab454738ee4ce543d5b70d6 refs/tags/LABEL_2003_05_12_2355
++7f70e85309c6367138c0ebd14abdd49964b8d50a refs/tags/LABEL_2003_05_20_1630
++82226bf4d2fe87076d7f5d7e2677fdd5d0e35fc2 refs/tags/LABEL_2003_05_20_2250
++c8c3a8be2dd09e51d7dc33f431e3a638ac5688f2 refs/tags/LABEL_2003_05_22_2230
++5d232d0e7ea982d859d028ab482d95eb68460b19 refs/tags/LABEL_2003_05_23_0055
++4c3b21a5f915988e3d9681cf9cb566bb7bd56859 refs/tags/LABEL_2003_05_23_1450
++3b57fe0a70b903f4db66c558bb9828bc58acf06b refs/tags/LABEL_2003_05_30_1450
++7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed refs/tags/LABEL_2003_05_31_2115
++682011ff6968198da14b89e40d9f55b00f6d91f7 refs/tags/LABEL_2003_06_04_0200
++a3ed3996cdb9fca78329f6aca62d235263b7da90 refs/tags/LABEL_2003_06_05_2140
++71f9511803de65a3b98d2f592d418da1d1539f13 refs/tags/LABEL_2003_06_16_0055
++9a0e21a3a87830f66a93c17d1bca66fd12d860ae refs/tags/LABEL_2003_06_22_1530
++b783edaee8252bfdba3f7b3fd29519a81ce71e42 refs/tags/LABEL_2003_06_26_2220
++8bde7f776c77b343aca29b8c7b58464d915ac245 refs/tags/LABEL_2003_06_27_2340
++91a0ce965d5905c37fff45555b7e3113b9359c8f refs/tags/LABEL_2003_06_28_0050-stable
++ef0630617e0f52dabb2cf7073df281e680073ec1 refs/tags/LABEL_2003_06_28_0130-stable
++ed579b4210cc5341d511e090239ca697e91ad728 refs/tags/LABEL_2003_06_28_1800-stable
++eeacb89cb311fe273fef0f20b2bacf589b36f8f4 refs/tags/LABEL_2003_06_29_0145
++7152b1d0b3f8beec8c297d64664e41b4c4ef610a refs/tags/LABEL_2003_09_06_0055
++4f7cb08ee7b48a511a9cd2398fd4a243ca2733c7 refs/tags/LABEL_2003_09_12_0110
++f5300ab241898c490231e59229e6312aa862ce52 refs/tags/LABEL_2003_09_12_1745
++531716e1710083f91d9fa351f89d18e271b5c577 refs/tags/LABEL_2003_09_13_2100
++34b3049a60a37e180d73332ccddf706c049a0515 refs/tags/LABEL_2003_09_16_2310
++80369866a482b923f0398f4c8172865282559f5b refs/tags/LABEL_2003_09_18_2045
++bb65a312675f3cd1923a5cbe325ad9ca1703fc58 refs/tags/LABEL_2003_10_01_1830
++fbe4b5cbdea438ccec0d93de443f367f3ba46196 refs/tags/LABEL_2003_10_06_2355
++a0ff7f2eda50de4d4096265a086c94ac640fab7c refs/tags/LABEL_2003_10_09_1515
++5da627a424b3ad2d38a81886ba4a18e5123a6788 refs/tags/LABEL_2003_10_09_2320
++f72da3406bf6f1c1bce9aa03b07d070413a916af refs/tags/LABEL_2003_10_10_1200
++2d5b561e2bfdee8552a99b2cf93016cce2a74895 refs/tags/LABEL_2003_10_14_2140
++42d1f0394bef0624fc9664714d54bb137931d6a6 refs/tags/LABEL_2003_10_16_0200
++d7281f41094bee59eca958de3c04995a2f79034a refs/tags/LABEL_2003_10_20_0025
++b4757cee52597ab5a67c30a1bf2a3208209e1ccb refs/tags/LABEL_2003_11_26_MKR
++fa1399ed127c8be507bf182dc7d8d61a54938d79 refs/tags/LABEL_2003_12_06_1550
++5e4be00fb037feb6476125d044b98e0e22b70d31 refs/tags/LABEL_2004_01_21_2110
++6876609446980c3055bbd32c195a63330e21d8e6 refs/tags/LABEL_2004_01_29_1030
++a2d18bb7d31e7b971386fef505ff0218f3b6e893 refs/tags/LABEL_2004_02_11_2240
++cf56e1101957c09cb4aafcf28a89658c4649c511 refs/tags/LABEL_2004_02_20_2310
++5cfbab3d822cb690be6d4f1793aab0cea761134c refs/tags/LABEL_2004_02_24_0305
++232c150a250bb2fcb894b15d67c65df2458e271f refs/tags/LABEL_2004_03_12_0130
++42dfe7a1844cbad7114038aaf03828acb7a84414 refs/tags/LABEL_2004_03_14_2340
++d9df1f4e662441c487f96a4e1f91caa9297afdd9 refs/tags/LABEL_2004_03_16_2330
++b79a11cc2bda7a4d5e00444427a0d06b4e86a990 refs/tags/LABEL_2004_03_25_1630
++998eaaecd46ee5f00550e30e606cb5556e0b9345 refs/tags/LABEL_2004_04_18_2135
++5cf91d6bdc3e60bd43f9ba1bbb97a43ee49b2b2d refs/tags/LABEL_2004_04_23_2240
++e4cc71aa4403c82f0b3e89087024f83832ece9ec refs/tags/LABEL_2004_05_19_2335
++69459791268d48c7081802dbc7a51d4e42c8a8cd refs/tags/LABEL_2004_05_29_1850
++021bfcd3c624ce88f739f01ba4220197bdd47a5e refs/tags/LABEL_2004_06_24_1800
++e94d2cd9d1dc0f58b18e7c31fc9345129b1a44fb refs/tags/LABEL_2004_07_01_1200
++31a649234ee4051e96cf45285cdf2dbfa668d30c refs/tags/LABEL_2004_08_28_2355
++7ca202f566a6e9dc3d0dd0216e82ad1a48f50f19 refs/tags/LABEL_2004_08_29_0045
++eedcd078fe1434d93b84322c4e14c52f80282a41 refs/tags/LABEL_2004_09_09_0000
++8b74bf31fe57edfc502f94e905977304eac943ca refs/tags/LABEL_2004_10_12_0110
++14699a22cf47b83995d19877d2b938b2270defc0 refs/tags/LABEL_2004_10_20_0020
++cacfab588a897c369a4906818c5ed4bc40a450c5 refs/tags/LABEL_2004_11_17_2222
++ed54e6212518262d27abe5e6de3c608d5ebceafb refs/tags/LABEL_2004_11_25_0035
++f7d1572bf51619554f278cb543ef0445baa3a1f8 refs/tags/LABEL_2004_12_18_2335
++bff96b0e6bdf8551e8468b111177c553e4994db2 refs/tags/LABEL_2004_12_19_1100
++08f272787a93cb11338fd81ab92a7439a361e3b2 refs/tags/LABEL_2004_12_19_2240
++400ab719c6025c176c50bcdff342384222d7424b refs/tags/LABEL_2004_12_20_1220
++436be29cad60a46ed5983120aff71909d8f234a3 refs/tags/LABEL_2005_01_31_2245
++e799d3755e83c70bf8c92977190d1777b390a8de refs/tags/LABEL_2005_02_07_2045
++b9649854f6ffdeaad23daec21013552cef2e05f0 refs/tags/LABEL_2005_02_08_1615
++e58cf2a0cfeb357faa134af1e12b96f4109af360 refs/tags/LABEL_2005_02_28_0050
++f4733a0764741966a5e842968166b40fb062d577 refs/tags/LABEL_2005_03_06_0225
++911d08f6ae244c6407fff268585e5b9544ce8adb refs/tags/LABEL_2005_03_15_0125
++f5c5ef4a1fa7dcf90fd74f795a131d07377406ab refs/tags/LABEL_2005_04_05_1830
++12b43d515c62682fcf7b578f31920a2be49142fe refs/tags/LABEL_2005_04_05_2345
++5e5f9ed254e20b830fef5f42a52ac0bbdc92a57e refs/tags/LABEL_2005_04_14_0115
++412babe304b948e1e3a909f8d2eb091b83f700d5 refs/tags/LABEL_2005_05_05_1920
++ed16fefcbaf99a67a7dd7639898dbc896c70cb1b refs/tags/LABEL_2005_05_09_1245
++9dd41a7b0c5c94d74c25edfdd6393c656669c09a refs/tags/LABEL_2005_05_13_0050
++88804d19e2bf36c9eaefadbd7199c093c900953b refs/tags/LABEL_2005_07_04_0202
++dafba16e6fc1837381c8e74c4891ad6965cf54ab refs/tags/LABEL_2005_08_12_0050
++053b40fa0c90d885b00c29c9c4490924801809f7 refs/tags/LABEL_2005_09_15_2320
++eb394f56db3e05d00891d6dc36a00df0025cf255 refs/tags/LABEL_2006_03_12_0025
++^84ef51a632063e8cb57b2e9a4252497512831ffe
++9bf86baaa3b35b25baa2d664e2f7f6cafad689ee refs/tags/LABEL_2006_04_18_1106
++^8419c013048b1f15f3fa2fc7c0463d860a04ee3e
++7a4978bc272e20c7febd15d76786c7d9b86a98cd refs/tags/LABEL_2006_05_10_1800
++^977b50f86824fe3c262ef7efce5dbb7ddaf8a48f
++c7071e6d645a8e13adb0d4cea2caad27213fa62f refs/tags/LABEL_2006_05_19_1133
++^5770a1e488621a9e7e344afed7c921ff4e715a63
++b11752921b5d22dcfda237e035a86470993e887b refs/tags/LABEL_2006_06_30_2020
++^3f7a63e6a34c5b435864c860c1563117e45d1c35
++2f91a3d0f8a73665423eb6ab17689c67f05e0887 refs/tags/U-Boot-0_2_0
++60fbe254243ec461ec73da13132be098db33d3fa refs/tags/U-Boot-0_3_0
++02c9bed451b36f3b1f11d5fe617da4fe4b9f9ab7 refs/tags/U-Boot-0_3_1
++993cad9364c6b87ae429d1ed1130d8153f6f027e refs/tags/U-Boot-0_4_0
++b0fce99bfc116c2ddb4506268d6e4a0a7054478d refs/tags/U-Boot-0_4_1
++f12e568ca45f6c56b5a6d52a43524987e141abe7 refs/tags/U-Boot-0_4_2
++ad12965db5d145f7cf7595cbeaf03b3402f42897 refs/tags/U-Boot-0_4_3
++945af8d723a29e9b6289d84250745ed0dc16fc81 refs/tags/U-Boot-0_4_4
++ae3af05ec986a8ac66dadb5eafe13db2d4a02c5c refs/tags/U-Boot-0_4_5
++e0ac62d798ce60ec5d43125d4786e58b0d881836 refs/tags/U-Boot-0_4_6
++0cb61d7dddb0d8c087f6df46a74815950668c97b refs/tags/U-Boot-0_4_7
++7205e4075d8b50e4dd89fe39ed03860b23cbb704 refs/tags/U-Boot-0_4_8
++b13fb01a62708492cae4b33c4d6fa9ae127905f4 refs/tags/U-Boot-1_0_0
++b299e41a0d34bf96202d9bbb72739bdd9414b0cc refs/tags/U-Boot-1_0_1
++198ea9e294e38cea49f9f2d9b911bdfdd20e48dc refs/tags/U-Boot-1_0_2
++f525c8a1476945b078ce4ffe6cf768c286cbf8cc refs/tags/U-Boot-1_1_0
++08f1080c9cbde2a500e6efe8bc5647a68f183c91 refs/tags/U-Boot-1_1_1
++15c7a8efd2f7275e5b3249aac305f2598a998645 refs/tags/U-Boot-1_1_2
++2893ecbf3e5b983970138289b759baf45a327ff3 refs/tags/U-Boot-1_1_3
++74ad4b4fef966ab4cc7192b5b3808ec95e60570b refs/tags/U-Boot-1_1_4
++^e6b6d16de73de6a76e2ec4338291e828b860f040
++b7487ff5a5d41e379809509b9a07546e73577dc8 refs/tags/U-Boot-1_1_5
++^ba999c531ed16ec749b2b6f4b0133cee38842b91
++ba89ef3908907cf55a5bff6ba211b8d8c2b08800 refs/tags/U-Boot-1_1_6
++^c59200443072353044aa4bf737a5a60f9a9af231
++eb8fae4983cfe07fe7c785f483f2278b6146463a refs/tags/U-Boot-1_2_0
++^f4eb54529bb3664c3a562e488b460fe075f79d67
++d9af3c87df93e1a8126b1a52adf8db978e9a0d40 refs/tags/U_BOOT_0_1_0
++69a193a815e7f0b35eeeb013a1f1e0cd9e590f92 refs/tags/v1.3.0
++^9a337ddc154a10a26f117fd147b009abcdeba75a
++6b894f3c3eac06420acad28e70621c5ba410b321 refs/tags/v1.3.0-rc1
++^ff7640c9ead8806b5d827f2b29f9cb2632add729
++a5d674296b4a991efdb708a9c8d6c78d4e47f565 refs/tags/v1.3.0-rc2
++^66dcad3a9a53e0766d90e0084123bd8529522fb0
++bf58489ae2e0de9bd2d7a6ebdbfdb655b48f0c09 refs/tags/v1.3.0-rc3
++^636400198228d96983c06657b17f760f5989958e
++409530dcb489cf4c24fab977ca041dac27ff9f28 refs/tags/v1.3.0-rc4
++^5947f6999aafa7c54c1390983d264a8463dfea8e
++2006af48494237562529cfdb111681149e0f13e9 refs/tags/v1.3.1
++^41be969f4957115ed7b1fe8b890bfaee99d7a7a2
++b67a97f26c406e9116fc85f5dcad4917b7a1c801 refs/tags/v1.3.1-rc1
++^8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
++2b0e9596bac7d2776431657488db88703ba1d441 refs/tags/v1.3.2
++^30f1806f60978d707b0cff2d7bf89d141fc24290
++1dec865fbd4b229061233c504166443f623335db refs/tags/v1.3.2-rc1
++^67a4389e39ad853d65b72e2b7cad15c7e8291147
++c19f1e9b9a8794d488221a9cc3a60db03b7ccc5a refs/tags/v1.3.2-rc2
++^b29661fc1151077776454288051bc9a488351ce8
++955a05aa4445c5652c53e06254d420d7dffd49a6 refs/tags/v1.3.2-rc3
++^661bad63a076a96c39c64f136915f146725af92b
++01348d89a001323ae51dda449decea61092e008b refs/tags/v1.3.3
++^180a90abdae72587c0f679edf8991455e559440d
++33a7d077fd81772d263a4e91a5aebe585c5362ca refs/tags/v1.3.3-rc1
++^fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
++5ee1a6e902f3b76f672587bb7be4600ab9af1c34 refs/tags/v1.3.3-rc2
++^76617299358ebba260ecc02d33e8e75d8d13dd3b
++239f0883ea3a9f511f8925619d30a0dc9ea8fe01 refs/tags/v1.3.3-rc3
++^6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
++5978b7d69fc40ee9512a6c1b5a3216019ee8e847 refs/tags/v1.3.4
++^cd82919e6c8a73b363a26f34b734923844e52d1c
++7cbbab2ab61f4f726fac1ff6b8bf2dfd26f2b3ba refs/tags/v1.3.4-rc1
++^699f05125509249072a0b865c8d35520d97cd501
++69be245e15510af0756aafb01020f9752ff7e066 refs/tags/v1.3.4-rc2
++^4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
++624c2d518b6dfc652db6fcbc969bbd93f9821322 refs/tags/v2008.10
++^b59b16ca24bc7e77ec113021a6d77b9b32fcf192
++3033c74cb0ad3dfbb1733a36f72f2f4496ba1863 refs/tags/v2008.10-rc1
++^8b9e4787641719d709bfa2ebeb72e8bd4952bee7
++2071c4239c250da6c8cbc93aa1d74b503acb2507 refs/tags/v2008.10-rc2
++^c0d2f87d6c450128b88e73eea715fa3654f65b6c
++789d45f945bc37e721b91923388a91a4f4fcbedb refs/tags/v2008.10-rc3
++^b4dbacf69a669a17487054552fc2761149dd6767
++c2d264a1e4540f09e7098a42d094bf6724567043 refs/tags/v2009.01
++^72d15e705bc3983884105cb7755c7ba80e74a0a5
++866b1cc6f942be4e2669c17e390cd552abc68e3e refs/tags/v2009.01-rc1
++^aced78d852d0b009e8aaa1445af8cb40861ee549
++35ca1e5e625049dbad16ce4cb273e5af47706a23 refs/tags/v2009.01-rc2
++^0e3ece33801e377be67ffa29f083421ad820f28b
++79f73ea6d9d81ce14a839fa4cc24d1a3ad0975fc refs/tags/v2009.01-rc3
++^635e5f8fc82365e6e9734b3132bc95135a6de679
++661e77d04058f94336f621e41b7b341a3b503833 refs/tags/v2009.03
++^e60beb13cf0135dc71c541021487b5ccc4d269cb
++0eb92888fc505ffc6bc58a5e7bedc0ae127279fa refs/tags/v2009.03-rc1
++^32688e572ff96715b41420e9a7f280db6c399b65
++0e34d8aa7974c11a5fd9afe983e9c277e02ef358 refs/tags/v2009.03-rc2
++^b3dd629e78870ba2dc9f8032978721c0fa02a856
++d70da93b038dbee50cb3e84cc0db25aab424a772 refs/tags/v2009.06
++^6b1f78ae6ad037382ad430b07064105c88f7ac02
++4cb5ec6e36792f300ecbe4e67eb6931848e0bace refs/tags/v2009.06-rc1
++^6b8edfde22acc574b5532e9f086e6a7287a9bc78
++210d415558d01a195f98360b127e3f4eb3bb933b refs/tags/v2009.06-rc2
++^a2e0ffcf2d9a22c582a93e84a4bef20fd3877f47
++95bd78f93cfc903186e88fc58deac036c401cfbc refs/tags/v2009.06-rc3
++^580611cb0932143fc2d7a735cfa9ce1ef34d6002
++e99ab567a1a6848b871a9af8cab3ad2c0c49647a refs/tags/v2009.08
++^3d35d87d5482de23cd5dc4d7721b1086107cae50
++e2447f7b3a5336462dd3bebf9a10fc368461b023 refs/tags/v2009.08-rc1
++^94978e19f31d225b4f7d97c4acbac1ecfaeb8f69
++6f03d260e53b1263471e5c3e690ddfe43b53d959 refs/tags/v2009.08-rc2
++^eb1a4d0a471505c169bef19a73a60f8641f0b875
++9ab87511114da4af82dbdf745edc7478d3e3f274 refs/tags/v2009.08-rc3
++^963f2f611741f8d9c38bd7caf20ae8c95cab7b3f
++bd1e74b1989e22fe19f8809cacfbf9cbbf4eaf20 refs/tags/v2009.11
++^a200a7c04d89853d2a1395b96d8ca5e3dd754551
++815f048382dc123c29baa41238a89f820876bf1e refs/tags/v2009.11-rc1
++^4946775c6db52dba28f72ba3525764b54f1d4593
++4c682c60e20b5624868ed6aa214d073cfb8dc0a6 refs/tags/v2009.11-rc2
++^0fc52948bda0734431cb528ee4fd82f1dec8c7b5
++9fd828dddea4306b99670d07366fe3f7c1052d08 refs/tags/v2009.11.1
++^f20393c5e787b3776c179d20f82a86bda124d651
++65bc917e953601b09965e5fcdfbe4f6c75547e50 refs/tags/v2010.03
++^ca6e1c136ddb720c3bb2cc043b99f7f06bc46c55
++537c2a51feed445384aa43e482e4ddc0b5549a75 refs/tags/v2010.03-rc1
++^93910edb595a88d394da3eb2cf5148096155dfe9
++273a6decf55982f7a5263d17559b94281f36caf7 refs/tags/v2010.03-rc2
++^152dda3d94e97ede7af3f9560a59a659384d4585
++3ef91195a43e6a229290977d70bb913008db2dc9 refs/tags/v2010.03-rc3
++^2883cc2d48e99fd1873ef8af03fee7966611b735
++41d5718ee6fb36a1282cde6c86b55f83b62278e1 refs/tags/v2010.06
++^a59e27997637a2395ae2cc7f809127f24119a167
++096e50e0a8934f4e083d43d5711d611eebe82607 refs/tags/v2010.06-rc1
++^01f03bda5b22e5aeae5f02fd537da97a41485c73
++a42fe9aa726cd3d64c3fcf11eea0bc531ee8d281 refs/tags/v2010.06-rc2
++^a9046b9e1aeeedc66ddf1d00474ad0ce8c6aa6e4
++17d61cb4e86f3dc4e7deaa0042fe6d6a6afff8f3 refs/tags/v2010.06-rc3
++^482126e27b3dbf0e69a6445da8b94b3551adf05d
++f7b386b1df73ff213287eed6ca1b74bb91da1b05 refs/tags/v2010.09
++^1e4e5ef0469050f014aee1204dae8a9ab6053e49
++c988fb931f8c8f5d9ce1fc6ca2c20219bcd0fc10 refs/tags/v2010.09-rc1
++^2d941de9d5c7ba00dc19787dfa0aac2949fd00fb
++09012d353eaf26310dc3ddb1915a3d3504ab9a27 refs/tags/v2010.09-rc2
++^07517e7f4f582d1607adbc444bab75af3ac4a7f9
++d0e3a3f4574f1f51ae3d7c5605b7ea5c6df929d4 refs/tags/v2010.12
++^250ef029844be2cb98635f265359396866d1749f
++5aeba5ba231ccceba84dd2311b1dae645b75bfdc refs/tags/v2010.12-rc1
++^908614f20f7f0f5df736eed21b88e81ebbf14e86
++a1904f2bc34e97d79483bcefc35b188620ee9089 refs/tags/v2010.12-rc2
++^d0d2271f8c62e830ec65fb069b6d12dd708e3e2f
++9bde025ff24c811c02d2a7e6451a57ea63895b3a refs/tags/v2010.12-rc3
++^3ac45988ab1605baaf83bd3acb80a197c9a208c2
++b29fbb347698286935bfc401c08499a6f63479de refs/tags/v2011.03
++^19b54a701811220221fc4d5089a2bb18892018ca
++2360c73ed79d91fe75c297c8a62b2810e8eef281 refs/tags/v2011.03-rc1
++^42d44f631c4e8e5359775bdc098f2fffde4e5c05
++38c5af4db86a3e7feaff5092b136722c53784c03 refs/tags/v2011.03-rc2
++^cb815e5ff979e36d68df130a810d34de4bf93289
++54d5e1052f16fe5e3337600f485b13b4c6204972 refs/tags/v2011.06
++^b1af6f532e0d348b153d5c148369229d24af361a
++4d0984f19a46afd17d1ca843deacc5bbedd95eda refs/tags/v2011.06-rc1
++^7a82c208143bbc774ffcb4e53239410f867a0794
++1b885e3346f4e06463949dcca3f9444d3d76eeda refs/tags/v2011.06-rc2
++^6f4dd40cddbd69c56fec1285fee02cbd5a3833d8
++0431724fde21417139eb1209ea8b562235c64c6e refs/tags/v2011.06-rc3
++^79cfe422615c010a75ece41662a05cd432ada389
++58fb473021fd5377db6cb934ea7032da885f80b7 refs/tags/v2011.09
++^1d5e7fb403257d62f0f2419cb83fdf6b0f02f215
++86773b53d37288d8ad16f27b93fd948ff11f8012 refs/tags/v2011.09-rc1
++^6ceb0135f96d73063ffbaab5be7ce23933367388
++00e61f6907d4ecc2e41f4ba61da74e7cc8665e29 refs/tags/v2011.09-rc2
++^bc196029f53c2d82eb9a12eb8b66e696b6284941
++d0b049d45ae734fa473894ae6fd9f4d7d2437cc5 refs/tags/v2011.12
++^cba9a894fdb1cb49b60fcd1d1d6919cbd7995dd5
++ee26bfcef5eb5cb4481eb073924cddc22ea2e423 refs/tags/v2011.12-rc1
++^5738946be46c513fd945d3e1d8f8a0fa718b7c58
++db9c62b847eab7d42b396ee59cbf4e5e75f02fc6 refs/tags/v2011.12-rc2
++^901de79a3792c81aefcbf207a34049e63f21362b
++d18276f86b5bed7646749a6a81ae94af79578d5f refs/tags/v2011.12-rc3
++^be662e9a6b7bf27cb7bc06de18f3c51b2ea80160
++5910ada22359d6cd06b9299f1ef6020a1ea2b893 refs/tags/v2012.04
++^2790bf69dc12fb9aeb9836904e5f57c7f83d5552
++bf41e44b53ad476c47da12f985115d2f073c716d refs/tags/v2012.04-rc1
++^c008b6f6dd6b8965e9a7654ffbce75bb9ff7a3b5
++b9c6ec5eb3eaa4471b32e92f48d6df2867020738 refs/tags/v2012.04-rc2
++^f5cdc11775c4b7fdbf52a6dd2f463d329804ab11
++d2062de0a3356d2e5c4b9ee6b7c805f0ac5cef37 refs/tags/v2012.04-rc3
++^fb14b6b2f680363678b4e6a75eb9f3f0d79111fa
++b75d3092239fc5e0e05571d91a380eb8d90d2f45 refs/tags/v2012.04.01
++^415d386877df49eb051b85ef74fa59a16dc17c7d
++d8679b1a4e01cfc7e90be484f4feafdcf153f3a1 refs/tags/v2012.07
++^190649fb4309d1bc0fe7732fd0f951cb6440f935
++ea406aa0f20923152f447108f189bd6e84f2b082 refs/tags/v2012.07-rc1
++^211e47549b668c7cdd8658c0413a272f0d0495d4
++5f4bc90c127618f5022d0086d329bbacab9c2b9b refs/tags/v2012.07-rc2
++^8b10652d6d9cc05023b5a6b73840078066f95a50
++473fff580bfa77b2f4b4dcecbb63ede28f8da5fa refs/tags/v2012.07-rc3
++^c627faf637f5fe091bdb6846a52b16983e97b262
++5aad5045f59029384c11058970caa31de2cfa514 refs/tags/v2012.10
++^6528ff0109d81c1f21d20f9f1370782bccf87bcb
++91c92e05eb518c1697c64e30e6887aa59a4fde44 refs/tags/v2012.10-rc1
++^ee1f4caaa2a3f79d692155eec8a4c7289d60e106
++3b07d3f76ca3b0bb41b463291f8456918ecc7df9 refs/tags/v2012.10-rc2
++^221953d41dea8dce027b9ce6beee700d97ac2c83
++7f2daf884129488975dd5f41d87730b26532e128 refs/tags/v2012.10-rc3
++^c7c63221439ad87a8c05e7b42f9eae32ec7cc2d4
++35c192cf449860aec8766e20a51bf2052a1dc968 refs/tags/v2013.01
++^3a9d879f6f64585b819af728b53be0a05037fe0d
++02eac6cbf79f854495705a5cf074b9b31ebdef47 refs/tags/v2013.01-rc1
++^3ae7b240ad8c723d02aa79654220a07049b7ae4d
++e99406154b90847a729cfef176c5b0681b8fbf62 refs/tags/v2013.01-rc2
++^ebbf0d20aa85f623c49b7ed3349ebfea450c152d
++32811f96f8259013d054deddb4d3b67a3d3092aa refs/tags/v2013.01-rc3
++^6fb4d74e59750b43f00d460c569e8a30c67c5bb0
++8512592e47cc968d2d6eb788acde761ebc3acbf6 refs/tags/v2013.01.01
++^e8ae0fa5edd152b2b29c470b88429be4cdcd2c46
++eb34b5ea26363ff349dee46ec6fb90fbc2198495 refs/tags/v2013.04
++^d10f68ae47b67acab8b110b5c605dde4197a1820
++734a826d8508b7ca8131381f1fb9ad36e7e98432 refs/tags/v2013.04-rc1
++^2536850d7cd90bdb75bf3ff86838f913392b68db
++8a7f04c4b3fe8ecb0b8af5c285cd2e252f60482e refs/tags/v2013.04-rc2
++^c8142633e169665b246352918df5b76fd243bb71
++83be647fa85edeb64c98d2d61114ca30de30e308 refs/tags/v2013.04-rc3
++^cba6494f24d711ba63afb22b1ee691a41fee121c
++9e96446a0bf49683dad66708579873a3b6c4f068 refs/tags/v2013.07
++^62c175fbb8a0f9a926c88294ea9f7e88eb898f6c
++7a42d4e7aa2788b653927904e03ec20793823a19 refs/tags/v2013.07-rc1
++^216a793cc1702227fd4ad624080f585038d1fa45
++4d5aaff0a76a07d28051134d7301d25a74a3a32e refs/tags/v2013.07-rc2
++^e6bf18dba2a21bebf2c421b1c2e188225f6485a1
++3060931a37a2417275a24400a6eb60abeb1a176a refs/tags/v2013.07-rc3
++^68c517eafcb060aa8ef92ed2620f0f41c5275d89
++2d65a6b5a3f069ea92ee33c1c925d79610af12d0 refs/tags/v2013.10
++^183acb700378a8cfc5d50a01a65de93fb2c24586
++ff92b6e5cf51421163e4ea1d29004eeffd6b6a99 refs/tags/v2013.10-rc1
++^40a60c6e8bdd00330310eaa351c9391e74d0bc2c
++bab9dca36165be177a74ff31eabda75f94e26599 refs/tags/v2013.10-rc2
++^fb18fa95a14ae875ef0a5421cd9fecc00c7c3a4c
++c1d48b0698c9b7ddf342f5808d3a4a973317c2dc refs/tags/v2013.10-rc3
++^46ef4faed18196472eb95216b2f74c1397ecf024
++c99ec7332286341649cd5337eb1bbeabdff13a3a refs/tags/v2013.10-rc4
++^0c5274e6f3231a3a28dafc1204b3f71a3534c520
++e3fbee81eccebfd6c91609f6bc4b4aec3a017131 refs/tags/v2014.01
++^b44bd2c73c4cfb6e3b9e7f8cf987e8e39aa74a0b
++0b3dd5f23cf6eeb9ec84da8c77d8c7d1e7d23680 refs/tags/v2014.01-rc1
++^d19ad726bcd5d9106f7ba9c750462fcc369f1020
++e68eecb2d896ddef422984ae6d52793099b74e9a refs/tags/v2014.01-rc2
++^fd44194945714a478fab6407c04453caaef0bac9
++5f60aba0d3f6b827de8dc7e0850c1050f655b572 refs/tags/v2014.01-rc3
++^cddb6b8304bfbc34f43920051256de7fe6c4c0ab
++5b3ba909f4f881add7756d820f2eb67d3e31b112 refs/tags/v2014.04
++^dda0dbfc69f3d560c87f5be85f127ed862ea6721
++9574fdf82ff62a7086b257c89c01bde937a0c45e refs/tags/v2014.04-rc1
++^0a8e823ad0c5a602c93c2e8a54caf622ade6d3fb
++4017dac218f34783977c36af8f65984a57ace7e3 refs/tags/v2014.04-rc2
++^8ee950dd273aef6a074d41bf2ee4ef11d6f848fb
++ba34c9404626f23a41ef07bcdf3e7e5cbf133b82 refs/tags/v2014.04-rc3
++^c494eaf409cb8db9a5a513e9bdfac20b7a83daca
++590a74953a76f2b4cc552bd85b475ea54ba02f66 refs/tags/v2014.07
++^524123a70761110c5cf3ccc5f52f6d4da071b959
++2db93972561773246cb7498bf1ee73e3d34fa697 refs/tags/v2014.07-rc1
++^3e41c54ad8099951d57c3c5a0f5ebc6e8becf70c
++3472f37f1ce4d2737476b4ec7c768c04afe20046 refs/tags/v2014.07-rc2
++^0116f40bbc269c57566d69e0db8cb9da2e194d33
++d3b233a6a320688e22419134d6f7bb23e9c0332b refs/tags/v2014.07-rc3
++^76b21026ceb5a6a83fc53b0ecdf425f240318022
++9019e02a9d98f6788035ea352289a5afdbbf133d refs/tags/v2014.07-rc4
++^a176ff0705351bf6d993a8f15e081bfa2ba2e1af
++d96885d68127e270d16484c0fbc252953a2bf2e8 refs/tags/v2014.10
++^c43fd23cf619856b0763a64a6a3bcf3663058c49
++49fe41ad45d09cf083db39ce4a2653d903fbe1a7 refs/tags/v2014.10-rc1
++^e76b933e02e1b38e48754c435e9dba1c0deeb3c6
++8d6f7381cd8f915f6599044b1848a8a6a7faff02 refs/tags/v2014.10-rc2
++^d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6
++1f254ba729e8b21ccba3c9caf02bf358a0e8d136 refs/tags/v2014.10-rc3
++^742de9076e8a8f44b77794b43e6175d86b897996
++a013989f700d43f79af64fb74b05b2f333a60c7d refs/tags/v2015.01-rc1
++^9906090f527153afddc5aa64d37cb5f89c6ee129
++77831f3e5f83e12b4e7df418e7d43977b189031d refs/tags/v2015.01-rc2
++^2a82ec77d27ef5f860a107c4b764643a655dceeb
++ecb091a9035a9c89a57b7fbd6cdf1db1c5ee9a80 refs/tags/v2015.01-rc3
++^32fdf0e4d82bdca5d64d86330e461e59685f9959
++9305547115a8073900fec5e8f3938b93c675f2c2 refs/tags/v2015.01-rc4
++^125738e819a3b9d15210794b3dcef9f4d9bcf866
+diff -ruN u-boot-2015.01-rc3/.git/refs/heads/master u-boot/.git/refs/heads/master
+--- u-boot-2015.01-rc3/.git/refs/heads/master	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/refs/heads/master	2015-01-01 17:34:31.953508170 +0100
+@@ -0,0 +1 @@
++125738e819a3b9d15210794b3dcef9f4d9bcf866
+diff -ruN u-boot-2015.01-rc3/.git/refs/remotes/origin/HEAD u-boot/.git/refs/remotes/origin/HEAD
+--- u-boot-2015.01-rc3/.git/refs/remotes/origin/HEAD	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/.git/refs/remotes/origin/HEAD	2015-01-01 17:34:31.937508433 +0100
+@@ -0,0 +1 @@
++ref: refs/remotes/origin/master
+diff -ruN u-boot-2015.01-rc3/include/common.h u-boot/include/common.h
+--- u-boot-2015.01-rc3/include/common.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/common.h	2015-01-01 17:34:32.757494989 +0100
+@@ -70,12 +70,6 @@
+ #ifdef	CONFIG_4xx
+ #include <asm/ppc4xx.h>
+ #endif
+-#ifdef CONFIG_ARM
+-#define asmlinkage	/* nothing */
+-#endif
+-#ifdef CONFIG_X86
+-#define asmlinkage __attribute__((regparm(0)))
+-#endif
+ #ifdef CONFIG_BLACKFIN
+ #include <asm/blackfin.h>
+ #endif
+diff -ruN u-boot-2015.01-rc3/include/config_fallbacks.h u-boot/include/config_fallbacks.h
+--- u-boot-2015.01-rc3/include/config_fallbacks.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/config_fallbacks.h	2015-01-01 17:34:32.757494989 +0100
+@@ -79,6 +79,10 @@
+ #define CONFIG_SYS_PROMPT	"=> "
+ #endif
+ 
++#ifndef CONFIG_SYS_PBSIZE
++#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + 128)
++#endif
++
+ #ifndef CONFIG_FIT_SIGNATURE
+ #define CONFIG_IMAGE_FORMAT_LEGACY
+ #endif
+@@ -87,4 +91,10 @@
+ #undef CONFIG_IMAGE_FORMAT_LEGACY
+ #endif
+ 
++#ifdef CONFIG_DM_I2C
++# ifdef CONFIG_SYS_I2C
++#  error "Cannot define CONFIG_SYS_I2C when CONFIG_DM_I2C is used"
++# endif
++#endif
++
+ #endif	/* __CONFIG_FALLBACKS_H */
+diff -ruN u-boot-2015.01-rc3/include/configs/alt.h u-boot/include/configs/alt.h
+--- u-boot-2015.01-rc3/include/configs/alt.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/alt.h	2015-01-01 17:34:32.777494661 +0100
+@@ -95,4 +95,23 @@
+ #define CONFIG_USB_EHCI_RMOBILE
+ #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
+ 
++/* MMCIF */
++#define CONFIG_MMC
++#define CONFIG_GENERIC_MMC
++#define CONFIG_CMD_MMC
++
++#define CONFIG_SH_MMCIF
++#define CONFIG_SH_MMCIF_ADDR		0xee200000
++#define CONFIG_SH_MMCIF_CLK		48000000
++
++/* Module stop status bits */
++/* INTC-RT */
++#define CONFIG_SMSTP0_ENA	0x00400000
++/* MSIF */
++#define CONFIG_SMSTP2_ENA	0x00002000
++/* INTC-SYS, IRQC */
++#define CONFIG_SMSTP4_ENA	0x00000180
++/* SCIF2 */
++#define CONFIG_SMSTP7_ENA	0x00080000
++
+ #endif /* __ALT_H */
+diff -ruN u-boot-2015.01-rc3/include/configs/apalis_t30.h u-boot/include/configs/apalis_t30.h
+--- u-boot-2015.01-rc3/include/configs/apalis_t30.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/apalis_t30.h	2015-01-01 17:34:32.777494661 +0100
+@@ -26,10 +26,7 @@
+ 
+ /* I2C */
+ #define CONFIG_SYS_I2C_TEGRA
+-#define CONFIG_SYS_I2C_INIT_BOARD
+-#define CONFIG_SYS_I2C_SPEED		100000
+ #define CONFIG_CMD_I2C
+-#define CONFIG_SYS_I2C
+ 
+ /* SD/MMC */
+ #define CONFIG_MMC
+diff -ruN u-boot-2015.01-rc3/include/configs/B4860QDS.h u-boot/include/configs/B4860QDS.h
+--- u-boot-2015.01-rc3/include/configs/B4860QDS.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/B4860QDS.h	2015-01-01 17:34:32.757494989 +0100
+@@ -641,6 +641,14 @@
+ #define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
+ #endif
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE	0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE	0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE	CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE	(CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE	(CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE	(CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
+ #define CONFIG_SYS_QMAN_NUM_PORTALS	25
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+ #ifdef CONFIG_PHYS_64BIT
+@@ -649,6 +657,14 @@
+ #define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
+ #endif
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ 
+diff -ruN u-boot-2015.01-rc3/include/configs/beaver.h u-boot/include/configs/beaver.h
+--- u-boot-2015.01-rc3/include/configs/beaver.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/beaver.h	2015-01-01 17:34:32.781494596 +0100
+@@ -40,10 +40,7 @@
+ 
+ /* I2C */
+ #define CONFIG_SYS_I2C_TEGRA
+-#define CONFIG_SYS_I2C_INIT_BOARD
+-#define CONFIG_SYS_I2C_SPEED		100000
+ #define CONFIG_CMD_I2C
+-#define CONFIG_SYS_I2C
+ 
+ /* SD/MMC */
+ #define CONFIG_MMC
+diff -ruN u-boot-2015.01-rc3/include/configs/BSC9131RDB.h u-boot/include/configs/BSC9131RDB.h
+--- u-boot-2015.01-rc3/include/configs/BSC9131RDB.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/BSC9131RDB.h	2015-01-01 17:34:32.757494989 +0100
+@@ -11,6 +11,9 @@
+ #ifndef __CONFIG_H
+ #define __CONFIG_H
+ 
++#define CONFIG_SYS_GENERIC_BOARD
++#define CONFIG_DISPLAY_BOARDINFO
++
+ #ifdef CONFIG_BSC9131RDB
+ #define CONFIG_BSC9131
+ #define CONFIG_NAND_FSL_IFC
+diff -ruN u-boot-2015.01-rc3/include/configs/BSC9132QDS.h u-boot/include/configs/BSC9132QDS.h
+--- u-boot-2015.01-rc3/include/configs/BSC9132QDS.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/BSC9132QDS.h	2015-01-01 17:34:32.761494923 +0100
+@@ -11,6 +11,9 @@
+ #ifndef __CONFIG_H
+ #define __CONFIG_H
+ 
++#define CONFIG_SYS_GENERIC_BOARD
++#define CONFIG_DISPLAY_BOARDINFO
++
+ #ifdef CONFIG_BSC9132QDS
+ #define CONFIG_BSC9132
+ #endif
+diff -ruN u-boot-2015.01-rc3/include/configs/cardhu.h u-boot/include/configs/cardhu.h
+--- u-boot-2015.01-rc3/include/configs/cardhu.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/cardhu.h	2015-01-01 17:34:32.785494529 +0100
+@@ -43,12 +43,7 @@
+ 
+ /* I2C */
+ #define CONFIG_SYS_I2C_TEGRA
+-#define CONFIG_SYS_I2C_INIT_BOARD
+-#define CONFIG_I2C_MULTI_BUS
+-#define CONFIG_SYS_MAX_I2C_BUS		TEGRA_I2C_NUM_CONTROLLERS
+-#define CONFIG_SYS_I2C_SPEED		100000
+ #define CONFIG_CMD_I2C
+-#define CONFIG_SYS_I2C
+ 
+ /* SD/MMC */
+ #define CONFIG_MMC
+diff -ruN u-boot-2015.01-rc3/include/configs/chromebook_link.h u-boot/include/configs/chromebook_link.h
+--- u-boot-2015.01-rc3/include/configs/chromebook_link.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/chromebook_link.h	2015-01-01 17:34:32.785494529 +0100
+@@ -25,10 +25,10 @@
+ 
+ #define CONFIG_X86_RESET_VECTOR
+ #define CONFIG_NR_DRAM_BANKS			8
+-#define CONFIG_X86_MRC_START			0xfffa0000
++#define CONFIG_X86_MRC_ADDR			0xfffa0000
+ #define CONFIG_CACHE_MRC_SIZE_KB		512
+ 
+-#define CONFIG_COREBOOT_SERIAL
++#define CONFIG_X86_SERIAL
+ 
+ #define CONFIG_SCSI_DEV_LIST		{PCI_VENDOR_ID_INTEL, \
+ 			PCI_DEVICE_ID_INTEL_NM10_AHCI},	      \
+@@ -39,7 +39,7 @@
+ 	{PCI_VENDOR_ID_INTEL,		\
+ 			PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
+ 
+-#define CONFIG_X86_OPTION_ROM_FILENAME		pci8086,0166.bin
++#define CONFIG_X86_OPTION_ROM_FILE		pci8086,0166.bin
+ #define CONFIG_X86_OPTION_ROM_ADDR		0xfff90000
+ #define CONFIG_VIDEO_X86
+ 
+diff -ruN u-boot-2015.01-rc3/include/configs/colibri_t30.h u-boot/include/configs/colibri_t30.h
+--- u-boot-2015.01-rc3/include/configs/colibri_t30.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/colibri_t30.h	2015-01-01 17:34:32.785494529 +0100
+@@ -25,10 +25,7 @@
+ 
+ /* I2C */
+ #define CONFIG_SYS_I2C_TEGRA
+-#define CONFIG_SYS_I2C_INIT_BOARD
+-#define CONFIG_SYS_I2C_SPEED		100000
+ #define CONFIG_CMD_I2C
+-#define CONFIG_SYS_I2C
+ 
+ /* SD/MMC */
+ #define CONFIG_MMC
+diff -ruN u-boot-2015.01-rc3/include/configs/coreboot.h u-boot/include/configs/coreboot.h
+--- u-boot-2015.01-rc3/include/configs/coreboot.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/coreboot.h	2015-01-01 17:34:32.785494529 +0100
+@@ -49,7 +49,7 @@
+ 	{PCI_VENDOR_ID_INTEL,		\
+ 			PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
+ 
+-#define CONFIG_COREBOOT_SERIAL
++#define CONFIG_X86_SERIAL
+ 
+ #define CONFIG_STD_DEVICES_SETTINGS     "stdin=usbkbd,vga,serial\0" \
+ 					"stdout=vga,serial,cbmem\0" \
+diff -ruN u-boot-2015.01-rc3/include/configs/corenet_ds.h u-boot/include/configs/corenet_ds.h
+--- u-boot-2015.01-rc3/include/configs/corenet_ds.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/corenet_ds.h	2015-01-01 17:34:32.785494529 +0100
+@@ -495,6 +495,14 @@
+ #define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
+ #endif
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x00200000
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
+ #define CONFIG_SYS_QMAN_NUM_PORTALS	10
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf4200000
+ #ifdef CONFIG_PHYS_64BIT
+@@ -503,6 +511,14 @@
+ #define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
+ #endif
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x00200000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ #define CONFIG_SYS_DPAA_PME
+diff -ruN u-boot-2015.01-rc3/include/configs/crownbay.h u-boot/include/configs/crownbay.h
+--- u-boot-2015.01-rc3/include/configs/crownbay.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/include/configs/crownbay.h	2015-01-01 17:34:32.785494529 +0100
+@@ -0,0 +1,61 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++/*
++ * board/config.h - configuration options, board specific
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#include <configs/x86-common.h>
++
++#define CONFIG_SYS_MONITOR_LEN		(1 << 20)
++#define CONFIG_SYS_X86_START16		0xfffff800
++#define CONFIG_BOARD_EARLY_INIT_F
++
++#define CONFIG_X86_RESET_VECTOR
++#define CONFIG_NR_DRAM_BANKS		1
++
++#define CONFIG_X86_SERIAL
++#define CONFIG_SMSC_LPC47M
++
++#define CONFIG_PCI_MEM_BUS		0x40000000
++#define CONFIG_PCI_MEM_PHYS		CONFIG_PCI_MEM_BUS
++#define CONFIG_PCI_MEM_SIZE		0x80000000
++
++#define CONFIG_PCI_PREF_BUS		0xc0000000
++#define CONFIG_PCI_PREF_PHYS		CONFIG_PCI_PREF_BUS
++#define CONFIG_PCI_PREF_SIZE		0x20000000
++
++#define CONFIG_PCI_IO_BUS		0x2000
++#define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
++#define CONFIG_PCI_IO_SIZE		0xe000
++
++#define CONFIG_SYS_EARLY_PCI_INIT
++#define CONFIG_PCI_PNP
++#define CONFIG_E1000
++
++#define CONFIG_STD_DEVICES_SETTINGS     "stdin=serial\0" \
++					"stdout=serial\0" \
++					"stderr=serial\0"
++
++#define CONFIG_SCSI_DEV_LIST            \
++	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
++
++#define CONFIG_SPI_FLASH_SST
++
++#define CONFIG_MMC
++#define CONFIG_SDHCI
++#define CONFIG_GENERIC_MMC
++#define CONFIG_MMC_SDMA
++#define CONFIG_CMD_MMC
++
++/* Video is not supported */
++#undef CONFIG_VIDEO
++#undef CONFIG_CFB_CONSOLE
++
++#endif	/* __CONFIG_H */
+diff -ruN u-boot-2015.01-rc3/include/configs/dalmore.h u-boot/include/configs/dalmore.h
+--- u-boot-2015.01-rc3/include/configs/dalmore.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/dalmore.h	2015-01-01 17:34:32.789494465 +0100
+@@ -36,12 +36,7 @@
+ 
+ /* I2C */
+ #define CONFIG_SYS_I2C_TEGRA
+-#define CONFIG_SYS_I2C_INIT_BOARD
+-#define CONFIG_I2C_MULTI_BUS
+-#define CONFIG_SYS_MAX_I2C_BUS		TEGRA_I2C_NUM_CONTROLLERS
+-#define CONFIG_SYS_I2C_SPEED		100000
+ #define CONFIG_CMD_I2C
+-#define CONFIG_SYS_I2C
+ 
+ /* SD/MMC */
+ #define CONFIG_MMC
+diff -ruN u-boot-2015.01-rc3/include/configs/gose.h u-boot/include/configs/gose.h
+--- u-boot-2015.01-rc3/include/configs/gose.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/gose.h	2015-01-01 17:34:32.793494399 +0100
+@@ -91,4 +91,14 @@
+ #define CONFIG_USB_EHCI_RMOBILE
+ #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
+ 
++/* Module stop status bits */
++/* INTC-RT */
++#define CONFIG_SMSTP0_ENA	0x00400000
++/* MSIF */
++#define CONFIG_SMSTP2_ENA	0x00002000
++/* INTC-SYS, IRQC */
++#define CONFIG_SMSTP4_ENA	0x00000180
++/* SCIF0 */
++#define CONFIG_SMSTP7_ENA	0x00200000
++
+ #endif	/* __GOSE_H */
+diff -ruN u-boot-2015.01-rc3/include/configs/jetson-tk1.h u-boot/include/configs/jetson-tk1.h
+--- u-boot-2015.01-rc3/include/configs/jetson-tk1.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/jetson-tk1.h	2015-01-01 17:34:32.797494333 +0100
+@@ -25,12 +25,7 @@
+ 
+ /* I2C */
+ #define CONFIG_SYS_I2C_TEGRA
+-#define CONFIG_SYS_I2C_INIT_BOARD
+-#define CONFIG_I2C_MULTI_BUS
+-#define CONFIG_SYS_MAX_I2C_BUS		TEGRA_I2C_NUM_CONTROLLERS
+-#define CONFIG_SYS_I2C_SPEED		100000
+ #define CONFIG_CMD_I2C
+-#define CONFIG_SYS_I2C
+ 
+ /* SD/MMC */
+ #define CONFIG_MMC
+diff -ruN u-boot-2015.01-rc3/include/configs/km/kmp204x-common.h u-boot/include/configs/km/kmp204x-common.h
+--- u-boot-2015.01-rc3/include/configs/km/kmp204x-common.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/km/kmp204x-common.h	2015-01-01 17:34:32.797494333 +0100
+@@ -339,10 +339,26 @@
+ #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+ #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x00200000
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
+ #define CONFIG_SYS_QMAN_NUM_PORTALS	10
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf4200000
+ #define CONFIG_SYS_QMAN_MEM_PHYS	0xff4200000ull
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x00200000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ #define CONFIG_SYS_DPAA_PME
+diff -ruN u-boot-2015.01-rc3/include/configs/koelsch.h u-boot/include/configs/koelsch.h
+--- u-boot-2015.01-rc3/include/configs/koelsch.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/koelsch.h	2015-01-01 17:34:32.797494333 +0100
+@@ -92,4 +92,15 @@
+ #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
+ #define CONFIG_USB_STORAGE
+ 
++
++/* Module stop status bits */
++/* INTC-RT */
++#define CONFIG_SMSTP0_ENA	0x00400000
++/* MSIF*/
++#define CONFIG_SMSTP2_ENA	0x00002000
++/* INTC-SYS, IRQC */
++#define CONFIG_SMSTP4_ENA	0x00000180
++/* SCIF0 */
++#define CONFIG_SMSTP7_ENA	0x00200000
++
+ #endif	/* __KOELSCH_H */
+diff -ruN u-boot-2015.01-rc3/include/configs/lager.h u-boot/include/configs/lager.h
+--- u-boot-2015.01-rc3/include/configs/lager.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/lager.h	2015-01-01 17:34:32.797494333 +0100
+@@ -93,4 +93,23 @@
+ #define CONFIG_USB_MAX_CONTROLLER_COUNT	3
+ #define CONFIG_USB_STORAGE
+ 
++/* MMC */
++#define CONFIG_MMC
++#define CONFIG_CMD_MMC
++#define CONFIG_GENERIC_MMC
++
++#define CONFIG_SH_MMCIF
++#define CONFIG_SH_MMCIF_ADDR		0xEE220000
++#define CONFIG_SH_MMCIF_CLK		97500000
++
++/* Module stop status bits */
++/* INTC-RT */
++#define CONFIG_SMSTP0_ENA	0x00400000
++/* MSIF */
++#define CONFIG_SMSTP2_ENA	0x00002000
++/* INTC-SYS, IRQC */
++#define CONFIG_SMSTP4_ENA	0x00000180
++/* SCIF0 */
++#define CONFIG_SMSTP7_ENA	0x00200000
++
+ #endif	/* __LAGER_H */
+diff -ruN u-boot-2015.01-rc3/include/configs/ls1021aqds.h u-boot/include/configs/ls1021aqds.h
+--- u-boot-2015.01-rc3/include/configs/ls1021aqds.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/ls1021aqds.h	2015-01-01 17:34:32.797494333 +0100
+@@ -37,8 +37,85 @@
+ unsigned long get_board_ddr_clk(void);
+ #endif
+ 
++#ifdef CONFIG_QSPI_BOOT
++#define CONFIG_SYS_CLK_FREQ		100000000
++#define CONFIG_DDR_CLK_FREQ		100000000
++#define CONFIG_QIXIS_I2C_ACCESS
++#else
+ #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
+ #define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
++#endif
++
++#ifdef CONFIG_RAMBOOT_PBL
++#define CONFIG_SYS_FSL_PBL_PBI	board/freescale/ls1021aqds/ls102xa_pbi.cfg
++#endif
++
++#ifdef CONFIG_SD_BOOT
++#define CONFIG_SYS_FSL_PBL_RCW	board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
++#define CONFIG_SPL_FRAMEWORK
++#define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
++#define CONFIG_SPL_LIBCOMMON_SUPPORT
++#define CONFIG_SPL_LIBGENERIC_SUPPORT
++#define CONFIG_SPL_ENV_SUPPORT
++#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
++#define CONFIG_SPL_I2C_SUPPORT
++#define CONFIG_SPL_WATCHDOG_SUPPORT
++#define CONFIG_SPL_SERIAL_SUPPORT
++#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
++#define CONFIG_SPL_MMC_SUPPORT
++#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xe8
++#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x400
++
++#define CONFIG_SPL_TEXT_BASE		0x10000000
++#define CONFIG_SPL_MAX_SIZE		0x1a000
++#define CONFIG_SPL_STACK		0x1001d000
++#define CONFIG_SPL_PAD_TO		0x1c000
++#define CONFIG_SYS_TEXT_BASE		0x82000000
++
++#define CONFIG_SYS_SPL_MALLOC_START	0x80200000
++#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
++#define CONFIG_SPL_BSS_START_ADDR	0x80100000
++#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
++#define CONFIG_SYS_MONITOR_LEN		0x80000
++#endif
++
++#ifdef CONFIG_QSPI_BOOT
++#define CONFIG_SYS_TEXT_BASE		0x40010000
++#define CONFIG_SYS_NO_FLASH
++#endif
++
++#ifdef CONFIG_NAND_BOOT
++#define CONFIG_SYS_FSL_PBL_RCW	board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
++#define CONFIG_SPL_FRAMEWORK
++#define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
++#define CONFIG_SPL_LIBCOMMON_SUPPORT
++#define CONFIG_SPL_LIBGENERIC_SUPPORT
++#define CONFIG_SPL_ENV_SUPPORT
++#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
++#define CONFIG_SPL_I2C_SUPPORT
++#define CONFIG_SPL_WATCHDOG_SUPPORT
++#define CONFIG_SPL_SERIAL_SUPPORT
++#define CONFIG_SPL_NAND_SUPPORT
++#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
++
++#define CONFIG_SPL_TEXT_BASE		0x10000000
++#define CONFIG_SPL_MAX_SIZE		0x1a000
++#define CONFIG_SPL_STACK		0x1001d000
++#define CONFIG_SPL_PAD_TO		0x1c000
++#define CONFIG_SYS_TEXT_BASE		0x82000000
++
++#define CONFIG_SYS_NAND_U_BOOT_SIZE	(400 << 10)
++#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
++#define CONFIG_SYS_NAND_PAGE_SIZE	2048
++#define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
++#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
++
++#define CONFIG_SYS_SPL_MALLOC_START	0x80200000
++#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
++#define CONFIG_SPL_BSS_START_ADDR	0x80100000
++#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
++#define CONFIG_SYS_MONITOR_LEN		0x80000
++#endif
+ 
+ #ifndef CONFIG_SYS_TEXT_BASE
+ #define CONFIG_SYS_TEXT_BASE		0x67f80000
+@@ -71,13 +148,15 @@
+ 
+ #define CONFIG_FSL_CAAM			/* Enable CAAM */
+ 
+-#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
++#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
++	!defined(CONFIG_QSPI_BOOT)
+ #define CONFIG_U_QE
+ #endif
+ 
+ /*
+  * IFC Definitions
+  */
++#ifndef CONFIG_QSPI_BOOT
+ #define CONFIG_FSL_IFC
+ #define CONFIG_SYS_FLASH_BASE		0x60000000
+ #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
+@@ -170,6 +249,7 @@
+ #define CONFIG_CMD_NAND
+ 
+ #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
++#endif
+ 
+ /*
+  * QIXIS Definitions
+@@ -214,6 +294,40 @@
+ #define CONFIG_SYS_FPGA_FTIM3		0x0
+ #endif
+ 
++#if defined(CONFIG_NAND_BOOT)
++#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
++#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
++#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
++#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
++#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
++#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
++#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
++#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
++#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
++#define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR
++#define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
++#define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
++#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
++#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
++#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
++#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
++#define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR1_CSPR_EXT
++#define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR
++#define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
++#define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
++#define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
++#define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
++#define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
++#define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
++#define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
++#define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
++#define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
++#define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
++#define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_FTIM0
++#define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
++#define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
++#define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
++#else
+ #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
+ #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
+ #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
+@@ -246,6 +360,7 @@
+ #define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_FTIM1
+ #define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_FTIM2
+ #define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_FTIM3
++#endif
+ 
+ /*
+  * Serial Port
+@@ -279,6 +394,21 @@
+ #define CONFIG_FSL_ESDHC
+ #define CONFIG_GENERIC_MMC
+ 
++#define CONFIG_CMD_FAT
++#define CONFIG_DOS_PARTITION
++
++/* QSPI */
++#ifdef CONFIG_QSPI_BOOT
++#define CONFIG_FSL_QSPI
++#define QSPI0_AMBA_BASE			0x40000000
++#define FSL_QSPI_FLASH_SIZE		(1 << 24)
++#define FSL_QSPI_FLASH_NUM		2
++
++#define CONFIG_CMD_SF
++#define CONFIG_SPI_FLASH
++#define CONFIG_SPI_FLASH_SPANSION
++#endif
++
+ /*
+  * USB
+  */
+@@ -341,6 +471,14 @@
+ #endif
+ 
+ #endif
++
++/* PCIe */
++#define CONFIG_PCI		/* Enable PCI/PCIE */
++#define CONFIG_PCIE1		/* PCIE controler 1 */
++#define CONFIG_PCIE2		/* PCIE controler 2 */
++#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
++#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
++
+ #define CONFIG_CMD_PING
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_MII
+@@ -348,7 +486,20 @@
+ 
+ #define CONFIG_CMDLINE_TAG
+ #define CONFIG_CMDLINE_EDITING
++
++#ifdef CONFIG_QSPI_BOOT
++#undef CONFIG_CMD_IMLS
++#else
+ #define CONFIG_CMD_IMLS
++#endif
++
++#define CONFIG_ARMV7_NONSEC
++#define CONFIG_ARMV7_VIRT
++#define CONFIG_PEN_ADDR_BIG_ENDIAN
++#define CONFIG_LS102XA_NS_ACCESS
++#define CONFIG_SMP_PEN_ADDR		0x01ee0200
++#define CONFIG_TIMER_CLK_FREQ		12500000
++#define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR
+ 
+ #define CONFIG_HWCONFIG
+ #define HWCONFIG_BUFFER_SIZE		128
+@@ -385,6 +536,8 @@
+ 
+ #define CONFIG_SYS_LOAD_ADDR		0x82000000
+ 
++#define CONFIG_LS102XA_STREAM_ID
++
+ /*
+  * Stack sizes
+  * The stack sizes are set up in start.S using the settings below
+@@ -396,17 +549,37 @@
+ #define CONFIG_SYS_INIT_SP_ADDR \
+ 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+ 
++#ifdef CONFIG_SPL_BUILD
++#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
++#else
+ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
++#endif
+ 
+ /*
+  * Environment
+  */
+ #define CONFIG_ENV_OVERWRITE
+ 
++#if defined(CONFIG_SD_BOOT)
++#define CONFIG_ENV_OFFSET		0x100000
++#define CONFIG_ENV_IS_IN_MMC
++#define CONFIG_SYS_MMC_ENV_DEV		0
++#define CONFIG_ENV_SIZE			0x2000
++#elif defined(CONFIG_QSPI_BOOT)
++#define CONFIG_ENV_IS_IN_SPI_FLASH
++#define CONFIG_ENV_SIZE			0x2000          /* 8KB */
++#define CONFIG_ENV_OFFSET		0x100000        /* 1MB */
++#define CONFIG_ENV_SECT_SIZE		0x10000
++#elif defined(CONFIG_NAND_BOOT)
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_SIZE			0x2000
++#define CONFIG_ENV_OFFSET		(10 * CONFIG_SYS_NAND_BLOCK_SIZE)
++#else
+ #define CONFIG_ENV_IS_IN_FLASH
+ #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+ #define CONFIG_ENV_SIZE			0x2000
+ #define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
++#endif
+ 
+ #define CONFIG_OF_LIBFDT
+ #define CONFIG_OF_BOARD_SETUP
+diff -ruN u-boot-2015.01-rc3/include/configs/ls1021atwr.h u-boot/include/configs/ls1021atwr.h
+--- u-boot-2015.01-rc3/include/configs/ls1021atwr.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/ls1021atwr.h	2015-01-01 17:34:32.797494333 +0100
+@@ -35,6 +35,43 @@
+ #define CONFIG_SYS_CLK_FREQ		100000000
+ #define CONFIG_DDR_CLK_FREQ		100000000
+ 
++#ifdef CONFIG_RAMBOOT_PBL
++#define CONFIG_SYS_FSL_PBL_PBI	board/freescale/ls1021atwr/ls102xa_pbi.cfg
++#endif
++
++#ifdef CONFIG_SD_BOOT
++#define CONFIG_SYS_FSL_PBL_RCW	board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
++#define CONFIG_SPL_FRAMEWORK
++#define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
++#define CONFIG_SPL_LIBCOMMON_SUPPORT
++#define CONFIG_SPL_LIBGENERIC_SUPPORT
++#define CONFIG_SPL_ENV_SUPPORT
++#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
++#define CONFIG_SPL_I2C_SUPPORT
++#define CONFIG_SPL_WATCHDOG_SUPPORT
++#define CONFIG_SPL_SERIAL_SUPPORT
++#define CONFIG_SPL_MMC_SUPPORT
++#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xe8
++#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x400
++
++#define CONFIG_SPL_TEXT_BASE		0x10000000
++#define CONFIG_SPL_MAX_SIZE		0x1a000
++#define CONFIG_SPL_STACK		0x1001d000
++#define CONFIG_SPL_PAD_TO		0x1c000
++#define CONFIG_SYS_TEXT_BASE		0x82000000
++
++#define CONFIG_SYS_SPL_MALLOC_START	0x80200000
++#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
++#define CONFIG_SPL_BSS_START_ADDR	0x80100000
++#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
++#define CONFIG_SYS_MONITOR_LEN		0x80000
++#endif
++
++#ifdef CONFIG_QSPI_BOOT
++#define CONFIG_SYS_TEXT_BASE		0x40010000
++#define CONFIG_SYS_NO_FLASH
++#endif
++
+ #ifndef CONFIG_SYS_TEXT_BASE
+ #define CONFIG_SYS_TEXT_BASE		0x67f80000
+ #endif
+@@ -50,13 +87,15 @@
+ 
+ #define CONFIG_FSL_CAAM			/* Enable CAAM */
+ 
+-#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
++#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
++	!defined(CONFIG_QSPI_BOOT)
+ #define CONFIG_U_QE
+ #endif
+ 
+ /*
+  * IFC Definitions
+  */
++#ifndef CONFIG_QSPI_BOOT
+ #define CONFIG_FSL_IFC
+ #define CONFIG_SYS_FLASH_BASE		0x60000000
+ #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
+@@ -100,6 +139,7 @@
+ 
+ #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+ #define CONFIG_SYS_WRITE_SWAPPED_DATA
++#endif
+ 
+ /* CPLD */
+ 
+@@ -180,6 +220,21 @@
+ #define CONFIG_FSL_ESDHC
+ #define CONFIG_GENERIC_MMC
+ 
++#define CONFIG_CMD_FAT
++#define CONFIG_DOS_PARTITION
++
++/* QSPI */
++#ifdef CONFIG_QSPI_BOOT
++#define CONFIG_FSL_QSPI
++#define QSPI0_AMBA_BASE			0x40000000
++#define FSL_QSPI_FLASH_SIZE		(1 << 24)
++#define FSL_QSPI_FLASH_NUM		2
++
++#define CONFIG_CMD_SF
++#define CONFIG_SPI_FLASH
++#define CONFIG_SPI_FLASH_STMICRO
++#endif
++
+ /*
+  * Video
+  */
+@@ -236,6 +291,13 @@
+ #define CONFIG_HAS_ETH2
+ #endif
+ 
++/* PCIe */
++#define CONFIG_PCI		/* Enable PCI/PCIE */
++#define CONFIG_PCIE1		/* PCIE controler 1 */
++#define CONFIG_PCIE2		/* PCIE controler 2 */
++#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
++#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
++
+ #define CONFIG_CMD_PING
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_MII
+@@ -243,7 +305,20 @@
+ 
+ #define CONFIG_CMDLINE_TAG
+ #define CONFIG_CMDLINE_EDITING
++
++#ifdef CONFIG_QSPI_BOOT
++#undef CONFIG_CMD_IMLS
++#else
+ #define CONFIG_CMD_IMLS
++#endif
++
++#define CONFIG_ARMV7_NONSEC
++#define CONFIG_ARMV7_VIRT
++#define CONFIG_PEN_ADDR_BIG_ENDIAN
++#define CONFIG_LS102XA_NS_ACCESS
++#define CONFIG_SMP_PEN_ADDR		0x01ee0200
++#define CONFIG_TIMER_CLK_FREQ		12500000
++#define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR
+ 
+ #define CONFIG_HWCONFIG
+ #define HWCONFIG_BUFFER_SIZE		128
+@@ -277,6 +352,8 @@
+ 
+ #define CONFIG_SYS_LOAD_ADDR		0x82000000
+ 
++#define CONFIG_LS102XA_STREAM_ID
++
+ /*
+  * Stack sizes
+  * The stack sizes are set up in start.S using the settings below
+@@ -288,7 +365,11 @@
+ #define CONFIG_SYS_INIT_SP_ADDR \
+ 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+ 
++#ifdef CONFIG_SPL_BUILD
++#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
++#else
+ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
++#endif
+ 
+ #define CONFIG_SYS_QE_FW_ADDR     0x67f40000
+ 
+@@ -297,10 +378,22 @@
+  */
+ #define CONFIG_ENV_OVERWRITE
+ 
++#if defined(CONFIG_SD_BOOT)
++#define CONFIG_ENV_OFFSET		0x100000
++#define CONFIG_ENV_IS_IN_MMC
++#define CONFIG_SYS_MMC_ENV_DEV		0
++#define CONFIG_ENV_SIZE			0x20000
++#elif defined(CONFIG_QSPI_BOOT)
++#define CONFIG_ENV_IS_IN_SPI_FLASH
++#define CONFIG_ENV_SIZE			0x2000
++#define CONFIG_ENV_OFFSET		0x100000
++#define CONFIG_ENV_SECT_SIZE		0x10000
++#else
+ #define CONFIG_ENV_IS_IN_FLASH
+ #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+ #define CONFIG_ENV_SIZE			0x20000
+ #define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
++#endif
+ 
+ #define CONFIG_OF_LIBFDT
+ #define CONFIG_OF_BOARD_SETUP
+diff -ruN u-boot-2015.01-rc3/include/configs/mx53loco.h u-boot/include/configs/mx53loco.h
+--- u-boot-2015.01-rc3/include/configs/mx53loco.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/mx53loco.h	2015-01-01 17:34:32.801494268 +0100
+@@ -94,6 +94,7 @@
+ /* Command definition */
+ #include <config_cmd_default.h>
+ #define CONFIG_CMD_BOOTZ
++#define CONFIG_SUPPORT_RAW_INITRD
+ 
+ #undef CONFIG_CMD_IMLS
+ 
+diff -ruN u-boot-2015.01-rc3/include/configs/mx6sabre_common.h u-boot/include/configs/mx6sabre_common.h
+--- u-boot-2015.01-rc3/include/configs/mx6sabre_common.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/mx6sabre_common.h	2015-01-01 17:34:32.801494268 +0100
+@@ -220,9 +220,6 @@
+ #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+ #define CONFIG_AUTO_COMPLETE
+ #define CONFIG_SYS_CBSIZE              256
+-
+-/* Print Buffer Size */
+-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+ #define CONFIG_SYS_MAXARGS             16
+ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+ 
+diff -ruN u-boot-2015.01-rc3/include/configs/mx6slevk.h u-boot/include/configs/mx6slevk.h
+--- u-boot-2015.01-rc3/include/configs/mx6slevk.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/mx6slevk.h	2015-01-01 17:34:32.805494202 +0100
+@@ -209,6 +209,20 @@
+ #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+ #endif
+ 
++/* USB Configs */
++#define CONFIG_CMD_USB
++#ifdef CONFIG_CMD_USB
++#define CONFIG_USB_EHCI
++#define CONFIG_USB_EHCI_MX6
++#define CONFIG_USB_STORAGE
++#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
++#define CONFIG_USB_HOST_ETHER
++#define CONFIG_USB_ETHER_ASIX
++#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
++#define CONFIG_MXC_USB_FLAGS		0
++#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
++#endif
++
+ #define CONFIG_SYS_FSL_USDHC_NUM	3
+ #if defined(CONFIG_ENV_IS_IN_MMC)
+ #define CONFIG_SYS_MMC_ENV_DEV		1	/* SDHC2*/
+diff -ruN u-boot-2015.01-rc3/include/configs/mx6sxsabresd.h u-boot/include/configs/mx6sxsabresd.h
+--- u-boot-2015.01-rc3/include/configs/mx6sxsabresd.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/mx6sxsabresd.h	2015-01-01 17:34:32.805494202 +0100
+@@ -198,6 +198,20 @@
+ #define CONFIG_PHYLIB
+ #define CONFIG_PHY_ATHEROS
+ 
++
++#define CONFIG_CMD_USB
++#ifdef CONFIG_CMD_USB
++#define CONFIG_USB_EHCI
++#define CONFIG_USB_EHCI_MX6
++#define CONFIG_USB_STORAGE
++#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
++#define CONFIG_USB_HOST_ETHER
++#define CONFIG_USB_ETHER_ASIX
++#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
++#define CONFIG_MXC_USB_FLAGS   0
++#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
++#endif
++
+ #define CONFIG_CMD_PCI
+ #ifdef CONFIG_CMD_PCI
+ #define CONFIG_PCI
+@@ -208,6 +222,16 @@
+ #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(2, 1)
+ #endif
+ 
++#define CONFIG_DM
++#define CONFIG_DM_THERMAL
++#define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
++#define CONFIG_IMX6_THERMAL
++
++#define CONFIG_CMD_FUSE
++#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
++#define CONFIG_MXC_OCOTP
++#endif
++
+ /* FLASH and environment organization */
+ #define CONFIG_SYS_NO_FLASH
+ 
+diff -ruN u-boot-2015.01-rc3/include/configs/nyan-big.h u-boot/include/configs/nyan-big.h
+--- u-boot-2015.01-rc3/include/configs/nyan-big.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/include/configs/nyan-big.h	2015-01-01 17:34:32.805494202 +0100
+@@ -0,0 +1,74 @@
++/*
++ * (C) Copyright 2014
++ * NVIDIA Corporation <www.nvidia.com>
++ *
++ * SPDX-License-Identifier:     GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#include <linux/sizes.h>
++
++#include "tegra124-common.h"
++
++/* High-level configuration options */
++#define V_PROMPT			"Tegra124 (Nyan-big) # "
++#define CONFIG_TEGRA_BOARD_STRING	"Google/NVIDIA Nyan-big"
++
++/* Board-specific serial config */
++#define CONFIG_SERIAL_MULTI
++#define CONFIG_TEGRA_ENABLE_UARTA
++#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
++
++#define CONFIG_BOARD_EARLY_INIT_F
++
++/* I2C */
++#define CONFIG_SYS_I2C_TEGRA
++#define CONFIG_CMD_I2C
++
++/* SD/MMC */
++#define CONFIG_MMC
++#define CONFIG_GENERIC_MMC
++#define CONFIG_TEGRA_MMC
++#define CONFIG_CMD_MMC
++
++/* Environment in eMMC, at the end of 2nd "boot sector" */
++#define CONFIG_ENV_IS_IN_MMC
++#define CONFIG_SYS_MMC_ENV_DEV		0
++#define CONFIG_SYS_MMC_ENV_PART		2
++#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
++
++/* SPI */
++#define CONFIG_TEGRA114_SPI		/* Compatible w/ Tegra114 SPI */
++#define CONFIG_TEGRA114_SPI_CTRLS	6
++#define CONFIG_SPI_FLASH
++#define CONFIG_SPI_FLASH_WINBOND
++#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
++#define CONFIG_SF_DEFAULT_SPEED        24000000
++#define CONFIG_CMD_SPI
++#define CONFIG_CMD_SF
++#define CONFIG_SPI_FLASH_SIZE          (4 << 20)
++
++/* USB Host support */
++#define CONFIG_USB_EHCI
++#define CONFIG_USB_EHCI_TEGRA
++#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
++#define CONFIG_USB_STORAGE
++#define CONFIG_CMD_USB
++
++/* USB networking support */
++#define CONFIG_USB_HOST_ETHER
++#define CONFIG_USB_ETHER_ASIX
++
++/* General networking support */
++#define CONFIG_CMD_NET
++#define CONFIG_CMD_DHCP
++
++#define CONFIG_FIT
++#define CONFIG_OF_LIBFDT
++
++#include "tegra-common-usb-gadget.h"
++#include "tegra-common-post.h"
++
++#endif /* __CONFIG_H */
+diff -ruN u-boot-2015.01-rc3/include/configs/P1023RDB.h u-boot/include/configs/P1023RDB.h
+--- u-boot-2015.01-rc3/include/configs/P1023RDB.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/P1023RDB.h	2015-01-01 17:34:32.769494793 +0100
+@@ -347,9 +347,25 @@
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xff000000
+ #define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x00200000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ #define CONFIG_SYS_BMAN_MEM_BASE	0xff200000
+ #define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x00200000
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
+ 
+ /* For FM */
+ #define CONFIG_SYS_DPAA_FMAN
+diff -ruN u-boot-2015.01-rc3/include/configs/P2041RDB.h u-boot/include/configs/P2041RDB.h
+--- u-boot-2015.01-rc3/include/configs/P2041RDB.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/P2041RDB.h	2015-01-01 17:34:32.769494793 +0100
+@@ -13,6 +13,8 @@
+ 
+ #define CONFIG_P2041RDB
+ #define CONFIG_PHYS_64BIT
++#define CONFIG_SYS_GENERIC_BOARD
++#define CONFIG_DISPLAY_BOARDINFO
+ #define CONFIG_PPC_P2041
+ 
+ #ifdef CONFIG_RAMBOOT_PBL
+@@ -489,6 +491,14 @@
+ #define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
+ #endif
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x00200000
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
+ #define CONFIG_SYS_QMAN_NUM_PORTALS	10
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf4200000
+ #ifdef CONFIG_PHYS_64BIT
+@@ -497,6 +507,14 @@
+ #define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
+ #endif
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x00200000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ #define CONFIG_SYS_DPAA_PME
+diff -ruN u-boot-2015.01-rc3/include/configs/rcar-gen2-common.h u-boot/include/configs/rcar-gen2-common.h
+--- u-boot-2015.01-rc3/include/configs/rcar-gen2-common.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/rcar-gen2-common.h	2015-01-01 17:34:32.809494137 +0100
+@@ -28,6 +28,9 @@
+ #define CONFIG_CMD_FAT
+ #define CONFIG_CMD_SF
+ #define CONFIG_CMD_SPI
++#define CONFIG_CMD_EXT2
++#define CONFIG_CMD_EXT4
++#define CONFIG_CMD_EXT4_WRITE
+ 
+ #define CONFIG_SYS_THUMB_BUILD
+ #define CONFIG_SYS_GENERIC_BOARD
+@@ -36,6 +39,7 @@
+ #define CONFIG_FAT_WRITE
+ #define CONFIG_DOS_PARTITION
+ #define CONFIG_SUPPORT_VFAT
++#define CONFIG_FS_EXT4
+ #define CONFIG_EXT4_WRITE
+ 
+ #define CONFIG_CMDLINE_TAG
+diff -ruN u-boot-2015.01-rc3/include/configs/rpi.h u-boot/include/configs/rpi.h
+--- u-boot-2015.01-rc3/include/configs/rpi.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/rpi.h	2015-01-01 17:34:32.809494137 +0100
+@@ -34,6 +34,7 @@
+ #define CONFIG_DM
+ #define CONFIG_CMD_DM
+ #define CONFIG_DM_GPIO
++#define CONFIG_DM_SERIAL
+ 
+ /* Memory layout */
+ #define CONFIG_NR_DRAM_BANKS		1
+@@ -51,6 +52,7 @@
+ 					 CONFIG_SYS_SDRAM_SIZE - \
+ 					 GENERATED_GBL_DATA_SIZE)
+ #define CONFIG_SYS_MALLOC_LEN		SZ_4M
++#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
+ #define CONFIG_SYS_MEMTEST_START	0x00100000
+ #define CONFIG_SYS_MEMTEST_END		0x00200000
+ #define CONFIG_LOADADDR			0x00200000
+@@ -92,9 +94,7 @@
+ #endif
+ 
+ /* Console UART */
+-#define CONFIG_PL011_SERIAL
+-#define CONFIG_PL011_CLOCK		3000000
+-#define CONFIG_PL01x_PORTS		{ (void *)0x20201000 }
++#define CONFIG_PL01X_SERIAL
+ #define CONFIG_CONS_INDEX		0
+ #define CONFIG_BAUDRATE			115200
+ 
+diff -ruN u-boot-2015.01-rc3/include/configs/sandbox.h u-boot/include/configs/sandbox.h
+--- u-boot-2015.01-rc3/include/configs/sandbox.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/sandbox.h	2015-01-01 17:34:32.809494137 +0100
+@@ -112,6 +112,12 @@
+ #define CONFIG_SPI_FLASH_STMICRO
+ #define CONFIG_SPI_FLASH_WINBOND
+ 
++#define CONFIG_DM_I2C
++#define CONFIG_CMD_I2C
++#define CONFIG_SYS_I2C_SANDBOX
++#define CONFIG_I2C_EDID
++#define CONFIG_I2C_EEPROM
++
+ /* Memory things - we don't really want a memory test */
+ #define CONFIG_SYS_LOAD_ADDR		0x00000000
+ #define CONFIG_SYS_MEMTEST_START	0x00100000
+diff -ruN u-boot-2015.01-rc3/include/configs/seaboard.h u-boot/include/configs/seaboard.h
+--- u-boot-2015.01-rc3/include/configs/seaboard.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/seaboard.h	2015-01-01 17:34:32.813494071 +0100
+@@ -37,10 +37,7 @@
+ 
+ /* I2C */
+ #define CONFIG_SYS_I2C_TEGRA
+-#define CONFIG_SYS_I2C_INIT_BOARD
+-#define CONFIG_SYS_I2C_SPEED		100000
+ #define CONFIG_CMD_I2C
+-#define CONFIG_SYS_I2C
+ 
+ /* SD/MMC */
+ #define CONFIG_MMC
+diff -ruN u-boot-2015.01-rc3/include/configs/socfpga_common.h u-boot/include/configs/socfpga_common.h
+--- u-boot-2015.01-rc3/include/configs/socfpga_common.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/socfpga_common.h	2015-01-01 17:34:32.813494071 +0100
+@@ -159,7 +159,7 @@
+ #define CONFIG_SYS_MMC_MAX_BLK_COUNT	256	/* FIXME -- SPL only? */
+ #endif
+ 
+- /*
++/*
+  * I2C support
+  */
+ #define CONFIG_SYS_I2C
+@@ -187,6 +187,37 @@
+ #define CONFIG_CMD_I2C
+ 
+ /*
++ * QSPI support
++ */
++#ifdef CONFIG_OF_CONTROL	/* QSPI is controlled via DT */
++#define CONFIG_CMD_DM
++#define CONFIG_DM
++#define CONFIG_DM_SPI
++#define CONFIG_DM_SPI_FLASH
++#define CONFIG_CADENCE_QSPI
++/* Enable multiple SPI NOR flash manufacturers */
++#define CONFIG_SPI_FLASH		/* SPI flash subsystem */
++#define CONFIG_SPI_FLASH_STMICRO	/* Micron/Numonyx flash */
++#define CONFIG_SPI_FLASH_SPANSION	/* Spansion flash */
++#define CONFIG_SPI_FLASH_MTD
++/* QSPI reference clock */
++#ifndef __ASSEMBLY__
++unsigned int cm_get_qspi_controller_clk_hz(void);
++#define CONFIG_CQSPI_REF_CLK		cm_get_qspi_controller_clk_hz()
++#endif
++#define CONFIG_CQSPI_DECODER		0
++#define CONFIG_CMD_SF
++#endif
++
++#ifdef CONFIG_OF_CONTROL	/* DW SPI is controlled via DT */
++#define CONFIG_CMD_DM
++#define CONFIG_DM
++#define CONFIG_DM_SPI
++#define CONFIG_DESIGNWARE_SPI
++#define CONFIG_CMD_SPI
++#endif
++
++/*
+  * Serial Driver
+  */
+ #define CONFIG_SYS_NS16550
+diff -ruN u-boot-2015.01-rc3/include/configs/stv0991.h u-boot/include/configs/stv0991.h
+--- u-boot-2015.01-rc3/include/configs/stv0991.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/include/configs/stv0991.h	2015-01-01 17:34:32.813494071 +0100
+@@ -0,0 +1,95 @@
++/*
++ * (C) Copyright 2014
++ * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __CONFIG_STV0991_H
++#define __CONFIG_STV0991_H
++#define CONFIG_SYS_DCACHE_OFF
++#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
++#define CONFIG_BOARD_EARLY_INIT_F
++
++#define CONFIG_SYS_CORTEX_R4
++
++#define CONFIG_SYS_GENERIC_BOARD
++#define CONFIG_SYS_NO_FLASH
++
++/* ram memory-related information */
++#define CONFIG_NR_DRAM_BANKS			1
++#define PHYS_SDRAM_1				0x00000000
++#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM_1
++#define PHYS_SDRAM_1_SIZE			0x00198000
++
++#define CONFIG_ENV_SIZE				0x10000
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_ADDR				\
++	(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
++#define CONFIG_SYS_MAXARGS			16
++#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 16 * 1024)
++#define CONFIG_SYS_MALLOC_F_LEN			0x2000
++
++#define CONFIG_DM
++/* serial port (PL011) configuration */
++#define CONFIG_BAUDRATE				115200
++#ifdef CONFIG_DM
++#define CONFIG_DM_SERIAL
++#define CONFIG_PL01X_SERIAL
++#else
++#define CONFIG_SYS_SERIAL0                     0x80406000
++#define CONFIG_CONS_INDEX			0
++#define CONFIG_PL011_SERIAL
++#define CONFIG_PL01x_PORTS                     {(void *)CONFIG_SYS_SERIAL0}
++#define CONFIG_PL011_CLOCK                     (2700 * 1000)
++#endif
++
++/* user interface */
++#define CONFIG_SYS_PROMPT			"STV0991> "
++#define CONFIG_SYS_CBSIZE			1024
++#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE \
++						+sizeof(CONFIG_SYS_PROMPT) + 16)
++
++/* MISC */
++#define CONFIG_SYS_LOAD_ADDR			0x00000000
++#define CONFIG_SYS_INIT_RAM_SIZE		0x8000
++#define CONFIG_SYS_INIT_RAM_ADDR		0x00190000
++#define CONFIG_SYS_INIT_SP_OFFSET		\
++	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
++/* U-boot Load Address */
++#define CONFIG_SYS_TEXT_BASE			0x00010000
++#define CONFIG_SYS_INIT_SP_ADDR			\
++	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
++
++/* GMAC related configs */
++
++#define CONFIG_MII
++#define CONFIG_PHYLIB
++#define CONFIG_CMD_NET
++#define CONFIG_DESIGNWARE_ETH
++#define CONFIG_DW_ALTDESCRIPTOR
++#define CONFIG_PHY_MICREL
++
++/* Command support defines */
++#define CONFIG_CMD_PING
++#define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
++
++#include "config_cmd_default.h"
++#undef CONFIG_CMD_SAVEENV
++
++#define CONFIG_SYS_MEMTEST_START               0x0000
++#define CONFIG_SYS_MEMTEST_END                 1024*1024
++#define CONFIG_CMD_MEMTEST
++
++/* Misc configuration */
++#define CONFIG_SYS_LONGHELP
++#define CONFIG_CMDLINE_EDITING
++
++#define CONFIG_BOOTDELAY                       3
++#define CONFIG_BOOTCOMMAND                     "go 0x40040000"
++#define CONFIG_AUTOBOOT_KEYED
++#define CONFIG_AUTOBOOT_STOP_STR               " "
++#define CONFIG_AUTOBOOT_PROMPT                 \
++	"Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
++
++#endif /* __CONFIG_H */
+diff -ruN u-boot-2015.01-rc3/include/configs/sun7i.h u-boot/include/configs/sun7i.h
+--- u-boot-2015.01-rc3/include/configs/sun7i.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/sun7i.h	2015-01-01 17:34:32.813494071 +0100
+@@ -25,6 +25,7 @@
+ #define CONFIG_ARMV7_PSCI		1
+ #define CONFIG_ARMV7_SECURE_BASE	SUNXI_SRAM_B_BASE
+ #define CONFIG_SYS_CLK_FREQ		24000000
++#define CONFIG_TIMER_CLK_FREQ		CONFIG_SYS_CLK_FREQ
+ 
+ /*
+  * Include common sunxi configuration where most the settings are
+diff -ruN u-boot-2015.01-rc3/include/configs/T102xQDS.h u-boot/include/configs/T102xQDS.h
+--- u-boot-2015.01-rc3/include/configs/T102xQDS.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/T102xQDS.h	2015-01-01 17:34:32.773494727 +0100
+@@ -720,7 +720,7 @@
+ /* Qman/Bman */
+ #ifndef CONFIG_NOBQFMAN
+ #define CONFIG_SYS_DPAA_QBMAN		/* Support Q/Bman */
+-#define CONFIG_SYS_BMAN_NUM_PORTALS	25
++#define CONFIG_SYS_BMAN_NUM_PORTALS	10
+ #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+ #ifdef CONFIG_PHYS_64BIT
+ #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+@@ -728,7 +728,15 @@
+ #define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
+ #endif
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
+-#define CONFIG_SYS_QMAN_NUM_PORTALS	25
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
++#define CONFIG_SYS_QMAN_NUM_PORTALS	10
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+ #ifdef CONFIG_PHYS_64BIT
+ #define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
+@@ -736,6 +744,14 @@
+ #define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
+ #endif
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ 
+diff -ruN u-boot-2015.01-rc3/include/configs/T102xRDB.h u-boot/include/configs/T102xRDB.h
+--- u-boot-2015.01-rc3/include/configs/T102xRDB.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/T102xRDB.h	2015-01-01 17:34:32.773494727 +0100
+@@ -677,7 +677,7 @@
+ /* Qman/Bman */
+ #ifndef CONFIG_NOBQFMAN
+ #define CONFIG_SYS_DPAA_QBMAN		/* Support Q/Bman */
+-#define CONFIG_SYS_BMAN_NUM_PORTALS	25
++#define CONFIG_SYS_BMAN_NUM_PORTALS	10
+ #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+ #ifdef CONFIG_PHYS_64BIT
+ #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+@@ -685,7 +685,15 @@
+ #define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
+ #endif
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
+-#define CONFIG_SYS_QMAN_NUM_PORTALS	25
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
++#define CONFIG_SYS_QMAN_NUM_PORTALS	10
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+ #ifdef CONFIG_PHYS_64BIT
+ #define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
+@@ -693,6 +701,14 @@
+ #define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
+ #endif
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ 
+diff -ruN u-boot-2015.01-rc3/include/configs/T1040QDS.h u-boot/include/configs/T1040QDS.h
+--- u-boot-2015.01-rc3/include/configs/T1040QDS.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/T1040QDS.h	2015-01-01 17:34:32.773494727 +0100
+@@ -605,14 +605,30 @@
+ /* Qman/Bman */
+ #ifndef CONFIG_NOBQFMAN
+ #define CONFIG_SYS_DPAA_QBMAN		/* Support Q/Bman */
+-#define CONFIG_SYS_BMAN_NUM_PORTALS	25
++#define CONFIG_SYS_BMAN_NUM_PORTALS	10
+ #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+ #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
+-#define CONFIG_SYS_QMAN_NUM_PORTALS	25
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
++#define CONFIG_SYS_QMAN_NUM_PORTALS	10
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+ #define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ #define CONFIG_SYS_DPAA_PME
+diff -ruN u-boot-2015.01-rc3/include/configs/T104xRDB.h u-boot/include/configs/T104xRDB.h
+--- u-boot-2015.01-rc3/include/configs/T104xRDB.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/T104xRDB.h	2015-01-01 17:34:32.773494727 +0100
+@@ -104,7 +104,10 @@
+ 
+ /* support deep sleep */
+ #define CONFIG_DEEP_SLEEP
++#if defined(CONFIG_DEEP_SLEEP)
++#define CONFIG_BOARD_EARLY_INIT_F
+ #define CONFIG_SILENT_CONSOLE
++#endif
+ 
+ #ifndef CONFIG_SYS_TEXT_BASE
+ #define CONFIG_SYS_TEXT_BASE	0xeff40000
+@@ -636,14 +639,30 @@
+ /* Qman/Bman */
+ #ifndef CONFIG_NOBQFMAN
+ #define CONFIG_SYS_DPAA_QBMAN		/* Support Q/Bman */
+-#define CONFIG_SYS_BMAN_NUM_PORTALS	25
++#define CONFIG_SYS_BMAN_NUM_PORTALS	10
+ #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+ #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
+-#define CONFIG_SYS_QMAN_NUM_PORTALS	25
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
++#define CONFIG_SYS_QMAN_NUM_PORTALS	10
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+ #define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ #define CONFIG_SYS_DPAA_PME
+diff -ruN u-boot-2015.01-rc3/include/configs/T208xQDS.h u-boot/include/configs/T208xQDS.h
+--- u-boot-2015.01-rc3/include/configs/T208xQDS.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/T208xQDS.h	2015-01-01 17:34:32.773494727 +0100
+@@ -634,10 +634,26 @@
+ #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+ #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
+ #define CONFIG_SYS_QMAN_NUM_PORTALS	18
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+ #define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ #define CONFIG_SYS_DPAA_PME
+diff -ruN u-boot-2015.01-rc3/include/configs/T208xRDB.h u-boot/include/configs/T208xRDB.h
+--- u-boot-2015.01-rc3/include/configs/T208xRDB.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/T208xRDB.h	2015-01-01 17:34:32.773494727 +0100
+@@ -567,10 +567,26 @@
+ #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+ #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08
+ #define CONFIG_SYS_QMAN_NUM_PORTALS	18
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+ #define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ #define CONFIG_SYS_DPAA_PME
+diff -ruN u-boot-2015.01-rc3/include/configs/T4240EMU.h u-boot/include/configs/T4240EMU.h
+--- u-boot-2015.01-rc3/include/configs/T4240EMU.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/T4240EMU.h	2015-01-01 17:34:32.773494727 +0100
+@@ -85,10 +85,26 @@
+ #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+ #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
+ #define CONFIG_SYS_QMAN_NUM_PORTALS	50
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+ #define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ #define CONFIG_SYS_DPAA_PME
+diff -ruN u-boot-2015.01-rc3/include/configs/T4240QDS.h u-boot/include/configs/T4240QDS.h
+--- u-boot-2015.01-rc3/include/configs/T4240QDS.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/T4240QDS.h	2015-01-01 17:34:32.773494727 +0100
+@@ -417,10 +417,26 @@
+ #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+ #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
+ #define CONFIG_SYS_QMAN_NUM_PORTALS	50
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+ #define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ #define CONFIG_SYS_DPAA_PME
+diff -ruN u-boot-2015.01-rc3/include/configs/T4240RDB.h u-boot/include/configs/T4240RDB.h
+--- u-boot-2015.01-rc3/include/configs/T4240RDB.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/T4240RDB.h	2015-01-01 17:34:32.773494727 +0100
+@@ -12,6 +12,8 @@
+ 
+ #define CONFIG_T4240RDB
+ #define CONFIG_PHYS_64BIT
++#define CONFIG_SYS_GENERIC_BOARD
++#define CONFIG_DISPLAY_BOARDINFO
+ 
+ #define CONFIG_FSL_SATA_V2
+ #define CONFIG_PCIE4
+@@ -577,10 +579,26 @@
+ #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+ #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+ #define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
++#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
++					CONFIG_SYS_BMAN_CENA_SIZE)
++#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
+ #define CONFIG_SYS_QMAN_NUM_PORTALS	50
+ #define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+ #define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
+ #define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
++#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
++#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
++#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
++#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
++					CONFIG_SYS_QMAN_CENA_SIZE)
++#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
++#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
+ 
+ #define CONFIG_SYS_DPAA_FMAN
+ #define CONFIG_SYS_DPAA_PME
+diff -ruN u-boot-2015.01-rc3/include/configs/tbs2910.h u-boot/include/configs/tbs2910.h
+--- u-boot-2015.01-rc3/include/configs/tbs2910.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/tbs2910.h	2015-01-01 17:34:32.817494006 +0100
+@@ -167,7 +167,7 @@
+ #define CONFIG_USB_STORAGE
+ #define CONFIG_USB_KEYBOARD
+ #ifdef CONFIG_USB_KEYBOARD
+-#define CONFIG_SYS_USB_EVENT_POLL
++#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
+ #define CONFIG_SYS_STDIO_DEREGISTER
+ #define CONFIG_PREBOOT "if hdmidet; then usb start; fi"
+ #endif /* CONFIG_USB_KEYBOARD */
+diff -ruN u-boot-2015.01-rc3/include/configs/tec-ng.h u-boot/include/configs/tec-ng.h
+--- u-boot-2015.01-rc3/include/configs/tec-ng.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/tec-ng.h	2015-01-01 17:34:32.817494006 +0100
+@@ -23,12 +23,7 @@
+ 
+ /* I2C */
+ #define CONFIG_SYS_I2C_TEGRA
+-#define CONFIG_SYS_I2C_INIT_BOARD
+-#define CONFIG_I2C_MULTI_BUS
+-#define CONFIG_SYS_MAX_I2C_BUS		TEGRA_I2C_NUM_CONTROLLERS
+-#define CONFIG_SYS_I2C_SPEED		100000
+ #define CONFIG_CMD_I2C
+-#define CONFIG_SYS_I2C
+ 
+ /* SD/MMC */
+ #define CONFIG_MMC
+diff -ruN u-boot-2015.01-rc3/include/configs/tegra114-common.h u-boot/include/configs/tegra114-common.h
+--- u-boot-2015.01-rc3/include/configs/tegra114-common.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/tegra114-common.h	2015-01-01 17:34:32.817494006 +0100
+@@ -76,9 +76,6 @@
+ #define CONFIG_SYS_SPL_MALLOC_START	0x80090000
+ #define CONFIG_SPL_STACK		0x800ffffc
+ 
+-/* Total I2C ports on Tegra114 */
+-#define TEGRA_I2C_NUM_CONTROLLERS	5
+-
+ /* For USB EHCI controller */
+ #define CONFIG_EHCI_IS_TDI
+ #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
+diff -ruN u-boot-2015.01-rc3/include/configs/tegra124-common.h u-boot/include/configs/tegra124-common.h
+--- u-boot-2015.01-rc3/include/configs/tegra124-common.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/tegra124-common.h	2015-01-01 17:34:32.817494006 +0100
+@@ -68,9 +68,6 @@
+ #define CONFIG_SYS_SPL_MALLOC_START	0x80090000
+ #define CONFIG_SPL_STACK		0x800ffffc
+ 
+-/* Total I2C ports on Tegra124 */
+-#define TEGRA_I2C_NUM_CONTROLLERS	5
+-
+ /* For USB EHCI controller */
+ #define CONFIG_EHCI_IS_TDI
+ #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
+diff -ruN u-boot-2015.01-rc3/include/configs/tegra20-common.h u-boot/include/configs/tegra20-common.h
+--- u-boot-2015.01-rc3/include/configs/tegra20-common.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/tegra20-common.h	2015-01-01 17:34:32.817494006 +0100
+@@ -97,9 +97,6 @@
+ #define CONFIG_EHCI_IS_TDI
+ #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
+ 
+-/* Total I2C ports on Tegra20 */
+-#define TEGRA_I2C_NUM_CONTROLLERS	4
+-
+ #define CONFIG_SYS_NAND_SELF_INIT
+ #define CONFIG_SYS_NAND_ONFI_DETECTION
+ 
+diff -ruN u-boot-2015.01-rc3/include/configs/tegra30-common.h u-boot/include/configs/tegra30-common.h
+--- u-boot-2015.01-rc3/include/configs/tegra30-common.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/tegra30-common.h	2015-01-01 17:34:32.817494006 +0100
+@@ -73,9 +73,6 @@
+ #define CONFIG_SYS_SPL_MALLOC_START	0x80090000
+ #define CONFIG_SPL_STACK		0x800ffffc
+ 
+-/* Total I2C ports on Tegra30 */
+-#define TEGRA_I2C_NUM_CONTROLLERS	5
+-
+ /* For USB EHCI controller */
+ #define CONFIG_EHCI_IS_TDI
+ #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
+diff -ruN u-boot-2015.01-rc3/include/configs/tegra-common.h u-boot/include/configs/tegra-common.h
+--- u-boot-2015.01-rc3/include/configs/tegra-common.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/tegra-common.h	2015-01-01 17:34:32.817494006 +0100
+@@ -26,6 +26,7 @@
+ #endif
+ #define CONFIG_DM_SPI
+ #define CONFIG_DM_SPI_FLASH
++#define CONFIG_DM_I2C
+ 
+ #define CONFIG_SYS_TIMER_RATE		1000000
+ #define CONFIG_SYS_TIMER_COUNTER	NV_PA_TMRUS_BASE
+diff -ruN u-boot-2015.01-rc3/include/configs/trimslice.h u-boot/include/configs/trimslice.h
+--- u-boot-2015.01-rc3/include/configs/trimslice.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/trimslice.h	2015-01-01 17:34:32.817494006 +0100
+@@ -34,10 +34,7 @@
+ 
+ /* I2C */
+ #define CONFIG_SYS_I2C_TEGRA
+-#define CONFIG_SYS_I2C_INIT_BOARD
+-#define CONFIG_SYS_I2C_SPEED		100000
+ #define CONFIG_CMD_I2C
+-#define CONFIG_SYS_I2C
+ 
+ /* SD/MMC */
+ #define CONFIG_MMC
+diff -ruN u-boot-2015.01-rc3/include/configs/uniphier.h u-boot/include/configs/uniphier.h
+--- u-boot-2015.01-rc3/include/configs/uniphier.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/uniphier.h	2015-01-01 17:34:32.817494006 +0100
+@@ -187,6 +187,8 @@
+ #define CONFIG_FAT_WRITE
+ #define CONFIG_DOS_PARTITION
+ 
++#define CONFIG_CMD_DM
++
+ /* memtest works on */
+ #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+ #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x01000000)
+@@ -273,7 +275,11 @@
+ #define CONFIG_SYS_SPL_MALLOC_START	(0x0ff00000)
+ #define CONFIG_SYS_SPL_MALLOC_SIZE	(0x00004000)
+ 
++#ifdef CONFIG_SPL_BUILD
+ #define CONFIG_SYS_INIT_SP_ADDR		(0x0ff08000)
++#else
++#define CONFIG_SYS_INIT_SP_ADDR		((CONFIG_SYS_TEXT_BASE) - 0x00001000)
++#endif
+ 
+ #define CONFIG_SPL_FRAMEWORK
+ #define CONFIG_SPL_NAND_SUPPORT
+diff -ruN u-boot-2015.01-rc3/include/configs/venice2.h u-boot/include/configs/venice2.h
+--- u-boot-2015.01-rc3/include/configs/venice2.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/venice2.h	2015-01-01 17:34:32.821493940 +0100
+@@ -25,12 +25,7 @@
+ 
+ /* I2C */
+ #define CONFIG_SYS_I2C_TEGRA
+-#define CONFIG_SYS_I2C_INIT_BOARD
+-#define CONFIG_I2C_MULTI_BUS
+-#define CONFIG_SYS_MAX_I2C_BUS		TEGRA_I2C_NUM_CONTROLLERS
+-#define CONFIG_SYS_I2C_SPEED		100000
+ #define CONFIG_CMD_I2C
+-#define CONFIG_SYS_I2C
+ 
+ /* SD/MMC */
+ #define CONFIG_MMC
+diff -ruN u-boot-2015.01-rc3/include/configs/vexpress_aemv8a.h u-boot/include/configs/vexpress_aemv8a.h
+--- u-boot-2015.01-rc3/include/configs/vexpress_aemv8a.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/vexpress_aemv8a.h	2015-01-01 17:34:32.821493940 +0100
+@@ -8,6 +8,9 @@
+ #ifndef __VEXPRESS_AEMV8A_H
+ #define __VEXPRESS_AEMV8A_H
+ 
++/* We use generic board for v8 Versatile Express */
++#define CONFIG_SYS_GENERIC_BOARD
++
+ #ifdef CONFIG_BASE_FVP
+ #ifndef CONFIG_SEMIHOSTING
+ #error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING
+@@ -25,8 +28,6 @@
+ 
+ /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
+ 
+-/*#define CONFIG_SYS_GENERIC_BOARD*/
+-
+ #define CONFIG_SYS_NO_FLASH
+ 
+ #define CONFIG_SUPPORT_RAW_INITRD
+diff -ruN u-boot-2015.01-rc3/include/configs/whistler.h u-boot/include/configs/whistler.h
+--- u-boot-2015.01-rc3/include/configs/whistler.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/configs/whistler.h	2015-01-01 17:34:32.821493940 +0100
+@@ -26,10 +26,7 @@
+ 
+ /* I2C */
+ #define CONFIG_SYS_I2C_TEGRA
+-#define CONFIG_SYS_I2C_INIT_BOARD
+-#define CONFIG_SYS_I2C_SPEED		100000
+ #define CONFIG_CMD_I2C
+-#define CONFIG_SYS_I2C
+ 
+ /* SD/MMC */
+ #define CONFIG_MMC
+diff -ruN u-boot-2015.01-rc3/include/dfu.h u-boot/include/dfu.h
+--- u-boot-2015.01-rc3/include/dfu.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/dfu.h	2015-01-01 17:34:32.825493874 +0100
+@@ -150,9 +150,6 @@
+ char *dfu_extract_token(char** e, int *n);
+ void dfu_trigger_reset(void);
+ int dfu_get_alt(char *name);
+-bool dfu_detach(void);
+-void dfu_trigger_detach(void);
+-void dfu_clear_detach(void);
+ int dfu_init_env_entities(char *interface, char *devstr);
+ unsigned char *dfu_get_buf(struct dfu_entity *dfu);
+ unsigned char *dfu_free_buf(void);
+diff -ruN u-boot-2015.01-rc3/include/dm/uclass-id.h u-boot/include/dm/uclass-id.h
+--- u-boot-2015.01-rc3/include/dm/uclass-id.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/dm/uclass-id.h	2015-01-01 17:34:32.825493874 +0100
+@@ -19,6 +19,7 @@
+ 	UCLASS_TEST_FDT,
+ 	UCLASS_TEST_BUS,
+ 	UCLASS_SPI_EMUL,	/* sandbox SPI device emulator */
++	UCLASS_I2C_EMUL,	/* sandbox I2C device emulator */
+ 	UCLASS_SIMPLE_BUS,
+ 
+ 	/* U-Boot uclasses start here */
+@@ -29,6 +30,9 @@
+ 	UCLASS_SPI_FLASH,	/* SPI flash */
+ 	UCLASS_CROS_EC,	/* Chrome OS EC */
+ 	UCLASS_THERMAL,		/* Thermal sensor */
++	UCLASS_I2C,		/* I2C bus */
++	UCLASS_I2C_GENERIC,	/* Generic I2C device */
++	UCLASS_I2C_EEPROM,	/* I2C EEPROM device */
+ 
+ 	UCLASS_COUNT,
+ 	UCLASS_INVALID = -1,
+diff -ruN u-boot-2015.01-rc3/include/dm/ut.h u-boot/include/dm/ut.h
+--- u-boot-2015.01-rc3/include/dm/ut.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/dm/ut.h	2015-01-01 17:34:32.825493874 +0100
+@@ -89,6 +89,18 @@
+ 	}								\
+ }
+ 
++/* Assert that a pointer is not NULL */
++#define ut_assertnonnull(expr) {					\
++	const void *val = (expr);					\
++									\
++	if (val == NULL) {						\
++		ut_failf(dms, __FILE__, __LINE__, __func__,		\
++			 #expr " = NULL",				\
++			 "Expected non-null, got NULL");		\
++		return -1;						\
++	}								\
++}
++
+ /* Assert that an operation succeeds (returns 0) */
+ #define ut_assertok(cond)	ut_asserteq(0, cond)
+ 
+diff -ruN u-boot-2015.01-rc3/include/dt-bindings/pinctrl/pinctrl-tegra.h u-boot/include/dt-bindings/pinctrl/pinctrl-tegra.h
+--- u-boot-2015.01-rc3/include/dt-bindings/pinctrl/pinctrl-tegra.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/include/dt-bindings/pinctrl/pinctrl-tegra.h	2015-01-01 17:34:32.825493874 +0100
+@@ -0,0 +1,45 @@
++/*
++ * This header provides constants for Tegra pinctrl bindings.
++ *
++ * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
++ *
++ * Author: Laxman Dewangan <ldewangan@nvidia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms and conditions of the GNU General Public License,
++ * version 2, as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ */
++
++#ifndef _DT_BINDINGS_PINCTRL_TEGRA_H
++#define _DT_BINDINGS_PINCTRL_TEGRA_H
++
++/*
++ * Enable/disable for diffeent dt properties. This is applicable for
++ * properties nvidia,enable-input, nvidia,tristate, nvidia,open-drain,
++ * nvidia,lock, nvidia,rcv-sel, nvidia,high-speed-mode, nvidia,schmitt.
++ */
++#define TEGRA_PIN_DISABLE				0
++#define TEGRA_PIN_ENABLE				1
++
++#define TEGRA_PIN_PULL_NONE				0
++#define TEGRA_PIN_PULL_DOWN				1
++#define TEGRA_PIN_PULL_UP				2
++
++/* Low power mode driver */
++#define TEGRA_PIN_LP_DRIVE_DIV_8			0
++#define TEGRA_PIN_LP_DRIVE_DIV_4			1
++#define TEGRA_PIN_LP_DRIVE_DIV_2			2
++#define TEGRA_PIN_LP_DRIVE_DIV_1			3
++
++/* Rising/Falling slew rate */
++#define TEGRA_PIN_SLEW_RATE_FASTEST			0
++#define TEGRA_PIN_SLEW_RATE_FAST			1
++#define TEGRA_PIN_SLEW_RATE_SLOW			2
++#define TEGRA_PIN_SLEW_RATE_SLOWEST			3
++
++#endif
+diff -ruN u-boot-2015.01-rc3/include/dt-bindings/reset/altr,rst-mgr.h u-boot/include/dt-bindings/reset/altr,rst-mgr.h
+--- u-boot-2015.01-rc3/include/dt-bindings/reset/altr,rst-mgr.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/dt-bindings/reset/altr,rst-mgr.h	2015-01-01 17:34:32.825493874 +0100
+@@ -1,14 +1,7 @@
+ /*
+  * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
+  *
+- * This software is licensed under the terms of the GNU General Public
+- * License version 2, as published by the Free Software Foundation, and
+- * may be copied, distributed, and modified under those terms.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
++ * SPDX-License-Identifier:	GPL-2.0
+  */
+ 
+ #ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+diff -ruN u-boot-2015.01-rc3/include/errno.h u-boot/include/errno.h
+--- u-boot-2015.01-rc3/include/errno.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/errno.h	2015-01-01 17:34:32.829493808 +0100
+@@ -6,4 +6,7 @@
+ 
+ #define __set_errno(val) do { errno = val; } while (0)
+ 
++#ifdef CONFIG_ERRNO_STR
++const char *errno_str(int errno);
++#endif
+ #endif /* _ERRNO_H */
+diff -ruN u-boot-2015.01-rc3/include/fsl_ddr_sdram.h u-boot/include/fsl_ddr_sdram.h
+--- u-boot-2015.01-rc3/include/fsl_ddr_sdram.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/fsl_ddr_sdram.h	2015-01-01 17:34:32.829493808 +0100
+@@ -114,6 +114,7 @@
+ #define SDRAM_CFG_2T_EN			0x00008000
+ #define SDRAM_CFG_BI			0x00000001
+ 
++#define SDRAM_CFG2_FRC_SR		0x80000000
+ #define SDRAM_CFG2_D_INIT		0x00000010
+ #define SDRAM_CFG2_ODT_CFG_MASK		0x00600000
+ #define SDRAM_CFG2_ODT_NEVER		0
+@@ -163,6 +164,7 @@
+ #define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
+ #define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
+ #define DDR_CDR2_VREF_OVRD(x)	(0x00008080 | ((((x) - 37) & 0x3F) << 8))
++#define DDR_CDR2_VREF_TRAIN_EN	0x00000080
+ 
+ #if (defined(CONFIG_SYS_FSL_DDR_VER) && \
+ 	(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
+@@ -202,6 +204,8 @@
+ #define DDR_CDR_ODT_120ohm	0x6
+ #endif
+ 
++#define DDR_INIT_ADDR_EXT_UIA	(1 << 31)
++
+ /* Record of register values computed */
+ typedef struct fsl_ddr_cfg_regs_s {
+ 	struct {
+@@ -414,9 +418,11 @@
+ int board_need_mem_reset(void)
+ 	__attribute__((weak, alias("__board_need_mem_reset")));
+ 
+-void __weak board_mem_sleep_setup(void)
+-{
+-}
++#if defined(CONFIG_DEEP_SLEEP)
++void board_mem_sleep_setup(void);
++bool is_warm_boot(void);
++int fsl_dp_resume(void);
++#endif
+ 
+ /*
+  * The 85xx boards have a common prototype for fixed_sdram so put the
+diff -ruN u-boot-2015.01-rc3/include/fsl_usb.h u-boot/include/fsl_usb.h
+--- u-boot-2015.01-rc3/include/fsl_usb.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/fsl_usb.h	2015-01-01 17:34:32.829493808 +0100
+@@ -145,6 +145,25 @@
+ 	return SVR_SOC_VER(get_svr()) == SVR_T4240 &&
+ 		IS_SVR_REV(get_svr(), 2, 0);
+ }
++
++static inline bool has_erratum_a007792(void)
++{
++	u32 svr = get_svr();
++	u32 soc = SVR_SOC_VER(svr);
++
++	switch (soc) {
++	case SVR_T4240:
++	case SVR_T4160:
++		return IS_SVR_REV(svr, 2, 0);
++	case SVR_T1040:
++		return IS_SVR_REV(svr, 1, 0);
++	case SVR_T2080:
++	case SVR_T2081:
++		return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1);
++	}
++	return false;
++}
++
+ #else
+ static inline bool has_erratum_a006261(void)
+ {
+@@ -161,5 +180,9 @@
+ 	return false;
+ }
+ 
++static inline bool has_erratum_a007792(void)
++{
++	return false;
++}
+ #endif
+ #endif /*_ASM_FSL_USB_H_ */
+diff -ruN u-boot-2015.01-rc3/include/g_dnl.h u-boot/include/g_dnl.h
+--- u-boot-2015.01-rc3/include/g_dnl.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/g_dnl.h	2015-01-01 17:34:32.829493808 +0100
+@@ -39,4 +39,8 @@
+ void g_dnl_unregister(void);
+ void g_dnl_set_serialnumber(char *);
+ 
++bool g_dnl_detach(void);
++void g_dnl_trigger_detach(void);
++void g_dnl_clear_detach(void);
++
+ #endif /* __G_DOWNLOAD_H_ */
+diff -ruN u-boot-2015.01-rc3/include/i2c_eeprom.h u-boot/include/i2c_eeprom.h
+--- u-boot-2015.01-rc3/include/i2c_eeprom.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/include/i2c_eeprom.h	2015-01-01 17:34:32.833493744 +0100
+@@ -0,0 +1,19 @@
++/*
++ * Copyright (c) 2014 Google, Inc
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __I2C_EEPROM
++#define __I2C_EEPROM
++
++struct i2c_eeprom_ops {
++	int (*read)(struct udevice *dev, int offset, uint8_t *buf, int size);
++	int (*write)(struct udevice *dev, int offset, const uint8_t *buf,
++		     int size);
++};
++
++struct i2c_eeprom {
++};
++
++#endif
+diff -ruN u-boot-2015.01-rc3/include/i2c.h u-boot/include/i2c.h
+--- u-boot-2015.01-rc3/include/i2c.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/i2c.h	2015-01-01 17:34:32.833493744 +0100
+@@ -18,6 +18,355 @@
+ #define _I2C_H_
+ 
+ /*
++ * For now there are essentially two parts to this file - driver model
++ * here at the top, and the older code below (with CONFIG_SYS_I2C being
++ * most recent). The plan is to migrate everything to driver model.
++ * The driver model structures and API are separate as they are different
++ * enough as to be incompatible for compilation purposes.
++ */
++
++#ifdef CONFIG_DM_I2C
++
++enum dm_i2c_chip_flags {
++	DM_I2C_CHIP_10BIT	= 1 << 0, /* Use 10-bit addressing */
++	DM_I2C_CHIP_RD_ADDRESS	= 1 << 1, /* Send address for each read byte */
++	DM_I2C_CHIP_WR_ADDRESS	= 1 << 2, /* Send address for each write byte */
++};
++
++/**
++ * struct dm_i2c_chip - information about an i2c chip
++ *
++ * An I2C chip is a device on the I2C bus. It sits at a particular address
++ * and normally supports 7-bit or 10-bit addressing.
++ *
++ * To obtain this structure, use dev_get_parentdata(dev) where dev is the
++ * chip to examine.
++ *
++ * @chip_addr:	Chip address on bus
++ * @offset_len: Length of offset in bytes. A single byte offset can
++ *		represent up to 256 bytes. A value larger than 1 may be
++ *		needed for larger devices.
++ * @flags:	Flags for this chip (dm_i2c_chip_flags)
++ * @emul: Emulator for this chip address (only used for emulation)
++ */
++struct dm_i2c_chip {
++	uint chip_addr;
++	uint offset_len;
++	uint flags;
++#ifdef CONFIG_SANDBOX
++	struct udevice *emul;
++#endif
++};
++
++/**
++ * struct dm_i2c_bus- information about an i2c bus
++ *
++ * An I2C bus contains 0 or more chips on it, each at its own address. The
++ * bus can operate at different speeds (measured in Hz, typically 100KHz
++ * or 400KHz).
++ *
++ * To obtain this structure, use bus->uclass_priv where bus is the I2C
++ * bus udevice.
++ *
++ * @speed_hz: Bus speed in hertz (typically 100000)
++ */
++struct dm_i2c_bus {
++	int speed_hz;
++};
++
++/**
++ * i2c_read() - read bytes from an I2C chip
++ *
++ * To obtain an I2C device (called a 'chip') given the I2C bus address you
++ * can use i2c_get_chip(). To obtain a bus by bus number use
++ * uclass_get_device_by_seq(UCLASS_I2C, <bus number>).
++ *
++ * To set the address length of a devce use i2c_set_addr_len(). It
++ * defaults to 1.
++ *
++ * @dev:	Chip to read from
++ * @offset:	Offset within chip to start reading
++ * @buffer:	Place to put data
++ * @len:	Number of bytes to read
++ *
++ * @return 0 on success, -ve on failure
++ */
++int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer,
++	     int len);
++
++/**
++ * i2c_write() - write bytes to an I2C chip
++ *
++ * See notes for i2c_read() above.
++ *
++ * @dev:	Chip to write to
++ * @offset:	Offset within chip to start writing
++ * @buffer:	Buffer containing data to write
++ * @len:	Number of bytes to write
++ *
++ * @return 0 on success, -ve on failure
++ */
++int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer,
++	      int len);
++
++/**
++ * i2c_probe() - probe a particular chip address
++ *
++ * This can be useful to check for the existence of a chip on the bus.
++ * It is typically implemented by writing the chip address to the bus
++ * and checking that the chip replies with an ACK.
++ *
++ * @bus:	Bus to probe
++ * @chip_addr:	7-bit address to probe (10-bit and others are not supported)
++ * @chip_flags:	Flags for the probe (see enum dm_i2c_chip_flags)
++ * @devp:	Returns the device found, or NULL if none
++ * @return 0 if a chip was found at that address, -ve if not
++ */
++int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
++	      struct udevice **devp);
++
++/**
++ * i2c_set_bus_speed() - set the speed of a bus
++ *
++ * @bus:	Bus to adjust
++ * @speed:	Requested speed in Hz
++ * @return 0 if OK, -EINVAL for invalid values
++ */
++int i2c_set_bus_speed(struct udevice *bus, unsigned int speed);
++
++/**
++ * i2c_get_bus_speed() - get the speed of a bus
++ *
++ * @bus:	Bus to check
++ * @return speed of selected I2C bus in Hz, -ve on error
++ */
++int i2c_get_bus_speed(struct udevice *bus);
++
++/**
++ * i2c_set_chip_flags() - set flags for a chip
++ *
++ * Typically addresses are 7 bits, but for 10-bit addresses you should set
++ * flags to DM_I2C_CHIP_10BIT. All accesses will then use 10-bit addressing.
++ *
++ * @dev:	Chip to adjust
++ * @flags:	New flags
++ * @return 0 if OK, -EINVAL if value is unsupported, other -ve value on error
++ */
++int i2c_set_chip_flags(struct udevice *dev, uint flags);
++
++/**
++ * i2c_get_chip_flags() - get flags for a chip
++ *
++ * @dev:	Chip to check
++ * @flagsp:	Place to put flags
++ * @return 0 if OK, other -ve value on error
++ */
++int i2c_get_chip_flags(struct udevice *dev, uint *flagsp);
++
++/**
++ * i2c_set_offset_len() - set the offset length for a chip
++ *
++ * The offset used to access a chip may be up to 4 bytes long. Typically it
++ * is only 1 byte, which is enough for chips with 256 bytes of memory or
++ * registers. The default value is 1, but you can call this function to
++ * change it.
++ *
++ * @offset_len:	New offset length value (typically 1 or 2)
++ */
++
++int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len);
++/**
++ * i2c_deblock() - recover a bus that is in an unknown state
++ *
++ * See the deblock() method in 'struct dm_i2c_ops' for full information
++ *
++ * @bus:	Bus to recover
++ * @return 0 if OK, -ve on error
++ */
++int i2c_deblock(struct udevice *bus);
++
++/*
++ * Not all of these flags are implemented in the U-Boot API
++ */
++enum dm_i2c_msg_flags {
++	I2C_M_TEN		= 0x0010, /* ten-bit chip address */
++	I2C_M_RD		= 0x0001, /* read data, from slave to master */
++	I2C_M_STOP		= 0x8000, /* send stop after this message */
++	I2C_M_NOSTART		= 0x4000, /* no start before this message */
++	I2C_M_REV_DIR_ADDR	= 0x2000, /* invert polarity of R/W bit */
++	I2C_M_IGNORE_NAK	= 0x1000, /* continue after NAK */
++	I2C_M_NO_RD_ACK		= 0x0800, /* skip the Ack bit on reads */
++	I2C_M_RECV_LEN		= 0x0400, /* length is first received byte */
++};
++
++/**
++ * struct i2c_msg - an I2C message
++ *
++ * @addr:	Slave address
++ * @flags:	Flags (see enum dm_i2c_msg_flags)
++ * @len:	Length of buffer in bytes, may be 0 for a probe
++ * @buf:	Buffer to send/receive, or NULL if no data
++ */
++struct i2c_msg {
++	uint addr;
++	uint flags;
++	uint len;
++	u8 *buf;
++};
++
++/**
++ * struct i2c_msg_list - a list of I2C messages
++ *
++ * This is called i2c_rdwr_ioctl_data in Linux but the name does not seem
++ * appropriate in U-Boot.
++ *
++ * @msg:	Pointer to i2c_msg array
++ * @nmsgs:	Number of elements in the array
++ */
++struct i2c_msg_list {
++	struct i2c_msg *msgs;
++	uint nmsgs;
++};
++
++/**
++ * struct dm_i2c_ops - driver operations for I2C uclass
++ *
++ * Drivers should support these operations unless otherwise noted. These
++ * operations are intended to be used by uclass code, not directly from
++ * other code.
++ */
++struct dm_i2c_ops {
++	/**
++	 * xfer() - transfer a list of I2C messages
++	 *
++	 * @bus:	Bus to read from
++	 * @msg:	List of messages to transfer
++	 * @nmsgs:	Number of messages in the list
++	 * @return 0 if OK, -EREMOTEIO if the slave did not ACK a byte,
++	 *	-ECOMM if the speed cannot be supported, -EPROTO if the chip
++	 *	flags cannot be supported, other -ve value on some other error
++	 */
++	int (*xfer)(struct udevice *bus, struct i2c_msg *msg, int nmsgs);
++
++	/**
++	 * probe_chip() - probe for the presense of a chip address
++	 *
++	 * This function is optional. If omitted, the uclass will send a zero
++	 * length message instead.
++	 *
++	 * @bus:	Bus to probe
++	 * @chip_addr:	Chip address to probe
++	 * @chip_flags:	Probe flags (enum dm_i2c_chip_flags)
++	 * @return 0 if chip was found, -EREMOTEIO if not, -ENOSYS to fall back
++	 * to default probem other -ve value on error
++	 */
++	int (*probe_chip)(struct udevice *bus, uint chip_addr, uint chip_flags);
++
++	/**
++	 * set_bus_speed() - set the speed of a bus (optional)
++	 *
++	 * The bus speed value will be updated by the uclass if this function
++	 * does not return an error. This method is optional - if it is not
++	 * provided then the driver can read the speed from
++	 * bus->uclass_priv->speed_hz
++	 *
++	 * @bus:	Bus to adjust
++	 * @speed:	Requested speed in Hz
++	 * @return 0 if OK, -EINVAL for invalid values
++	 */
++	int (*set_bus_speed)(struct udevice *bus, unsigned int speed);
++
++	/**
++	 * get_bus_speed() - get the speed of a bus (optional)
++	 *
++	 * Normally this can be provided by the uclass, but if you want your
++	 * driver to check the bus speed by looking at the hardware, you can
++	 * implement that here. This method is optional. This method would
++	 * normally be expected to return bus->uclass_priv->speed_hz.
++	 *
++	 * @bus:	Bus to check
++	 * @return speed of selected I2C bus in Hz, -ve on error
++	 */
++	int (*get_bus_speed)(struct udevice *bus);
++
++	/**
++	 * set_flags() - set the flags for a chip (optional)
++	 *
++	 * This is generally implemented by the uclass, but drivers can
++	 * check the value to ensure that unsupported options are not used.
++	 * This method is optional. If provided, this method will always be
++	 * called when the flags change.
++	 *
++	 * @dev:	Chip to adjust
++	 * @flags:	New flags value
++	 * @return 0 if OK, -EINVAL if value is unsupported
++	 */
++	int (*set_flags)(struct udevice *dev, uint flags);
++
++	/**
++	 * deblock() - recover a bus that is in an unknown state
++	 *
++	 * I2C is a synchronous protocol and resets of the processor in the
++	 * middle of an access can block the I2C Bus until a powerdown of
++	 * the full unit is done. This is because slaves can be stuck
++	 * waiting for addition bus transitions for a transaction that will
++	 * never complete. Resetting the I2C master does not help. The only
++	 * way is to force the bus through a series of transitions to make
++	 * sure that all slaves are done with the transaction. This method
++	 * performs this 'deblocking' if support by the driver.
++	 *
++	 * This method is optional.
++	 */
++	int (*deblock)(struct udevice *bus);
++};
++
++#define i2c_get_ops(dev)	((struct dm_i2c_ops *)(dev)->driver->ops)
++
++/**
++ * i2c_get_chip() - get a device to use to access a chip on a bus
++ *
++ * This returns the device for the given chip address. The device can then
++ * be used with calls to i2c_read(), i2c_write(), i2c_probe(), etc.
++ *
++ * @bus:	Bus to examine
++ * @chip_addr:	Chip address for the new device
++ * @devp:	Returns pointer to new device if found or -ENODEV if not
++ *		found
++ */
++int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp);
++
++/**
++ * i2c_get_chip() - get a device to use to access a chip on a bus number
++ *
++ * This returns the device for the given chip address on a particular bus
++ * number.
++ *
++ * @busnum:	Bus number to examine
++ * @chip_addr:	Chip address for the new device
++ * @devp:	Returns pointer to new device if found or -ENODEV if not
++ *		found
++ */
++int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp);
++
++/**
++ * i2c_chip_ofdata_to_platdata() - Decode standard I2C platform data
++ *
++ * This decodes the chip address from a device tree node and puts it into
++ * its dm_i2c_chip structure. This should be called in your driver's
++ * ofdata_to_platdata() method.
++ *
++ * @blob:	Device tree blob
++ * @node:	Node offset to read from
++ * @spi:	Place to put the decoded information
++ */
++int i2c_chip_ofdata_to_platdata(const void *blob, int node,
++				struct dm_i2c_chip *chip);
++
++#endif
++
++#ifndef CONFIG_DM_I2C
++
++/*
+  * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
+  *
+  * The implementation MUST NOT use static or global variables if the
+@@ -451,4 +800,7 @@
+  * @return 0 if port was reset, -1 if not found
+  */
+ int i2c_reset_port_fdt(const void *blob, int node);
++
++#endif /* !CONFIG_DM_I2C */
++
+ #endif	/* _I2C_H_ */
+diff -ruN u-boot-2015.01-rc3/include/linux/linkage.h u-boot/include/linux/linkage.h
+--- u-boot-2015.01-rc3/include/linux/linkage.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/linux/linkage.h	2015-01-01 17:34:32.837493678 +0100
+@@ -17,7 +17,9 @@
+ #define CPP_ASMLINKAGE
+ #endif
+ 
++#ifndef asmlinkage
+ #define asmlinkage CPP_ASMLINKAGE
++#endif
+ 
+ #define SYMBOL_NAME_STR(X)	#X
+ #define SYMBOL_NAME(X)		X
+diff -ruN u-boot-2015.01-rc3/include/linux/string.h u-boot/include/linux/string.h
+--- u-boot-2015.01-rc3/include/linux/string.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/linux/string.h	2015-01-01 17:34:32.837493678 +0100
+@@ -30,6 +30,9 @@
+ #ifndef __HAVE_ARCH_STRNCPY
+ extern char * strncpy(char *,const char *, __kernel_size_t);
+ #endif
++#ifndef __HAVE_ARCH_STRLCPY
++size_t strlcpy(char *, const char *, size_t);
++#endif
+ #ifndef __HAVE_ARCH_STRCAT
+ extern char * strcat(char *, const char *);
+ #endif
+diff -ruN u-boot-2015.01-rc3/include/mmc.h u-boot/include/mmc.h
+--- u-boot-2015.01-rc3/include/mmc.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/mmc.h	2015-01-01 17:34:32.841493612 +0100
+@@ -31,6 +31,7 @@
+ #define MMC_VERSION_4_3		(MMC_VERSION_MMC | 0x403)
+ #define MMC_VERSION_4_41	(MMC_VERSION_MMC | 0x429)
+ #define MMC_VERSION_4_5		(MMC_VERSION_MMC | 0x405)
++#define MMC_VERSION_5_0		(MMC_VERSION_MMC | 0x500)
+ 
+ #define MMC_MODE_HS		(1 << 0)
+ #define MMC_MODE_HS_52MHz	(1 << 1)
+@@ -147,6 +148,7 @@
+  * EXT_CSD fields
+  */
+ #define EXT_CSD_GP_SIZE_MULT		143	/* R/W */
++#define EXT_CSD_PARTITION_SETTING	155	/* R/W */
+ #define EXT_CSD_PARTITIONS_ATTRIBUTE	156	/* R/W */
+ #define EXT_CSD_PARTITIONING_SUPPORT	160	/* RO */
+ #define EXT_CSD_RST_N_FUNCTION		162	/* R/W */
+@@ -197,6 +199,8 @@
+ #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x)	(x << 2)
+ #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x)	(x)
+ 
++#define EXT_CSD_PARTITION_SETTING_COMPLETED	(1 << 0)
++
+ #define R1_ILLEGAL_COMMAND		(1 << 22)
+ #define R1_APP_CMD			(1 << 5)
+ 
+@@ -314,6 +318,7 @@
+ 	char init_in_progress;	/* 1 if we have done mmc_start_init() */
+ 	char preinit;		/* start init as early as possible */
+ 	uint op_cond_response;	/* the response byte from the last op_cond */
++	int ddr_mode;
+ };
+ 
+ int mmc_register(struct mmc *mmc);
+diff -ruN u-boot-2015.01-rc3/include/part.h u-boot/include/part.h
+--- u-boot-2015.01-rc3/include/part.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/part.h	2015-01-01 17:34:32.845493546 +0100
+@@ -244,6 +244,26 @@
+  */
+ int gpt_restore(block_dev_desc_t *dev_desc, char *str_disk_guid,
+ 		disk_partition_t *partitions, const int parts_count);
++
++/**
++ * is_valid_gpt_buf() - Ensure that the Primary GPT information is valid
++ *
++ * @param dev_desc - block device descriptor
++ * @param buf - buffer which contains the MBR and Primary GPT info
++ *
++ * @return - '0' on success, otherwise error
++ */
++int is_valid_gpt_buf(block_dev_desc_t *dev_desc, void *buf);
++
++/**
++ * write_mbr_and_gpt_partitions() - write MBR, Primary GPT and Backup GPT
++ *
++ * @param dev_desc - block device descriptor
++ * @param buf - buffer which contains the MBR and Primary GPT info
++ *
++ * @return - '0' on success, otherwise error
++ */
++int write_mbr_and_gpt_partitions(block_dev_desc_t *dev_desc, void *buf);
+ #endif
+ 
+ #endif /* _PART_H */
+diff -ruN u-boot-2015.01-rc3/include/pci_ids.h u-boot/include/pci_ids.h
+--- u-boot-2015.01-rc3/include/pci_ids.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/pci_ids.h	2015-01-01 17:34:32.845493546 +0100
+@@ -2998,6 +2998,14 @@
+ #define PCI_DEVICE_ID_INTEL_82454NX     0x84cb
+ #define PCI_DEVICE_ID_INTEL_84460GX	0x84ea
+ #define PCI_DEVICE_ID_INTEL_IXP4XX	0x8500
++#define PCI_DEVICE_ID_INTEL_TCF_GBE	0x8802
++#define PCI_DEVICE_ID_INTEL_TCF_SDIO_0	0x8809
++#define PCI_DEVICE_ID_INTEL_TCF_SDIO_1	0x880a
++#define PCI_DEVICE_ID_INTEL_TCF_SATA	0x880b
++#define PCI_DEVICE_ID_INTEL_TCF_UART_0	0x8811
++#define PCI_DEVICE_ID_INTEL_TCF_UART_1	0x8812
++#define PCI_DEVICE_ID_INTEL_TCF_UART_2	0x8813
++#define PCI_DEVICE_ID_INTEL_TCF_UART_3	0x8814
+ #define PCI_DEVICE_ID_INTEL_IXP2800	0x9004
+ #define PCI_DEVICE_ID_INTEL_S21152BB	0xb152
+ 
+diff -ruN u-boot-2015.01-rc3/include/smsc_lpc47m.h u-boot/include/smsc_lpc47m.h
+--- u-boot-2015.01-rc3/include/smsc_lpc47m.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/include/smsc_lpc47m.h	2015-01-01 17:34:32.849493480 +0100
+@@ -0,0 +1,19 @@
++/*
++ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef _SMSC_LPC47M_H_
++#define _SMSC_LPC47M_H_
++
++/**
++ * Configure the base I/O port of the specified serial device and enable the
++ * serial device.
++ *
++ * @dev: High 8 bits = Super I/O port, low 8 bits = logical device number.
++ * @iobase: Processor I/O port address to assign to this serial device.
++ */
++void lpc47m_enable_serial(u16 dev, u16 iobase);
++
++#endif /* _SMSC_LPC47M_H_ */
+diff -ruN u-boot-2015.01-rc3/include/spi.h u-boot/include/spi.h
+--- u-boot-2015.01-rc3/include/spi.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/spi.h	2015-01-01 17:34:32.849493480 +0100
+@@ -34,6 +34,7 @@
+ 
+ /* SPI TX operation modes */
+ #define SPI_OPM_TX_QPP		(1 << 0)
++#define SPI_OPM_TX_BP		(1 << 1)
+ 
+ /* SPI RX operation modes */
+ #define SPI_OPM_RX_AS		(1 << 0)
+diff -ruN u-boot-2015.01-rc3/include/tps6586x.h u-boot/include/tps6586x.h
+--- u-boot-2015.01-rc3/include/tps6586x.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/tps6586x.h	2015-01-01 17:34:32.849493480 +0100
+@@ -44,9 +44,9 @@
+  * Set up the TPS6586X I2C bus number. This will be used for all operations
+  * on the device. This function must be called before using other functions.
+  *
+- * @param bus	I2C bus number containing the TPS6586X chip
++ * @param bus	I2C bus containing the TPS6586X chip
+  * @return 0 (always succeeds)
+  */
+-int tps6586x_init(int bus);
++int tps6586x_init(struct udevice *bus);
+ 
+ #endif	/* _TPS6586X_H_ */
+diff -ruN u-boot-2015.01-rc3/include/usb/ehci-fsl.h u-boot/include/usb/ehci-fsl.h
+--- u-boot-2015.01-rc3/include/usb/ehci-fsl.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/include/usb/ehci-fsl.h	2015-01-01 17:34:32.853493416 +0100
+@@ -280,7 +280,9 @@
+ #define MXC_EHCI_IPPUE_DOWN		(1 << 10)
+ #define MXC_EHCI_IPPUE_UP		(1 << 11)
+ 
++int usb_phy_mode(int port);
+ /* Board-specific initialization */
+ int board_ehci_hcd_init(int port);
++int board_usb_phy_mode(int port);
+ 
+ #endif /* _EHCI_FSL_H */
+diff -ruN u-boot-2015.01-rc3/lib/asm-offsets.c u-boot/lib/asm-offsets.c
+--- u-boot-2015.01-rc3/lib/asm-offsets.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/lib/asm-offsets.c	2015-01-01 17:34:32.857493350 +0100
+@@ -31,9 +31,6 @@
+ #ifdef CONFIG_SYS_MALLOC_F_LEN
+ 	DEFINE(GD_MALLOC_BASE, offsetof(struct global_data, malloc_base));
+ #endif
+-#ifdef CONFIG_X86
+-	DEFINE(GD_BIST, offsetof(struct global_data, arch.bist));
+-#endif
+ 
+ #if defined(CONFIG_ARM)
+ 
+diff -ruN u-boot-2015.01-rc3/lib/errno_str.c u-boot/lib/errno_str.c
+--- u-boot-2015.01-rc3/lib/errno_str.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/lib/errno_str.c	2015-01-01 17:34:32.857493350 +0100
+@@ -0,0 +1,147 @@
++/*
++ * Copyright (C) 2014 Samsung Electronics
++ * Przemyslaw Marczak <p.marczak@samsung.com>
++ *
++ * SDPX-License-Identifier:	GPL-2.0+
++ */
++#include <common.h>
++#include <errno.h>
++
++#define ERRNO_MSG(errno, msg)	msg
++#define SAME_AS(x)		(const char *)&errno_message[x]
++
++static const char * const errno_message[] = {
++	ERRNO_MSG(0, "Success"),
++	ERRNO_MSG(EPERM, "Operation not permitted"),
++	ERRNO_MSG(ENOEN, "No such file or directory"),
++	ERRNO_MSG(ESRCH, "No such process"),
++	ERRNO_MSG(EINTR, "Interrupted system call"),
++	ERRNO_MSG(EIO, "I/O error"),
++	ERRNO_MSG(ENXIO, "No such device or address"),
++	ERRNO_MSG(E2BIG, "Argument list too long"),
++	ERRNO_MSG(ENOEXEC, "Exec format error"),
++	ERRNO_MSG(EBADF, "Bad file number"),
++	ERRNO_MSG(ECHILD, "No child processes"),
++	ERRNO_MSG(EAGAIN, "Try again"),
++	ERRNO_MSG(ENOMEM, "Out of memory"),
++	ERRNO_MSG(EACCES, "Permission denied"),
++	ERRNO_MSG(EFAULT, "Bad address"),
++	ERRNO_MSG(ENOTBL, "Block device required"),
++	ERRNO_MSG(EBUSY, "Device or resource busy"),
++	ERRNO_MSG(EEXIST, "File exists"),
++	ERRNO_MSG(EXDEV, "Cross-device link"),
++	ERRNO_MSG(ENODEV, "No such device"),
++	ERRNO_MSG(ENOTDIR, "Not a directory"),
++	ERRNO_MSG(EISDIR, "Is a directory"),
++	ERRNO_MSG(EINVAL, "Invalid argument"),
++	ERRNO_MSG(ENFILE, "File table overflow"),
++	ERRNO_MSG(EMFILE, "Too many open files"),
++	ERRNO_MSG(ENOTTY, "Not a typewriter"),
++	ERRNO_MSG(ETXTBSY, "Text file busy"),
++	ERRNO_MSG(EFBIG, "File too large"),
++	ERRNO_MSG(ENOSPC, "No space left on device"),
++	ERRNO_MSG(ESPIPE, "Illegal seek"),
++	ERRNO_MSG(EROFS, "Read-only file system"),
++	ERRNO_MSG(EMLINK, "Too many links"),
++	ERRNO_MSG(EPIPE, "Broken pipe"),
++	ERRNO_MSG(EDOM, "Math argument out of domain of func"),
++	ERRNO_MSG(ERANGE, "Math result not representable"),
++	ERRNO_MSG(EDEADLK, "Resource deadlock would occur"),
++	ERRNO_MSG(ENAMETOOLONG, "File name too long"),
++	ERRNO_MSG(ENOLCK, "No record locks available"),
++	ERRNO_MSG(ENOSYS, "Function not implemented"),
++	ERRNO_MSG(ENOTEMPTY, "Directory not empty"),
++	ERRNO_MSG(ELOOP, "Too many symbolic links encountered"),
++	ERRNO_MSG(EWOULDBLOCK, SAME_AS(EAGAIN)),
++	ERRNO_MSG(ENOMSG, "No message of desired type"),
++	ERRNO_MSG(EIDRM, "Identifier removed"),
++	ERRNO_MSG(ECHRNG, "Channel number out of range"),
++	ERRNO_MSG(EL2NSYNC, "Level 2 not synchronized"),
++	ERRNO_MSG(EL3HLT, "Level 3 halted"),
++	ERRNO_MSG(EL3RST, "Level 3 reset"),
++	ERRNO_MSG(ELNRNG, "Link number out of range"),
++	ERRNO_MSG(EUNATCH, "Protocol driver not attached"),
++	ERRNO_MSG(ENOCSI, "No CSI structure available"),
++	ERRNO_MSG(EL2HLT, "Level 2 halted"),
++	ERRNO_MSG(EBADE, "Invalid exchange"),
++	ERRNO_MSG(EBADR, "Invalid request descriptor"),
++	ERRNO_MSG(EXFULL, "Exchange full"),
++	ERRNO_MSG(ENOANO, "No anode"),
++	ERRNO_MSG(EBADRQC, "Invalid request code"),
++	ERRNO_MSG(EBADSLT, "Invalid slot"),
++	ERRNO_MSG(EDEADLOCK, SAME_AS(EDEADLK)),
++	ERRNO_MSG(EBFONT, "Bad font file format"),
++	ERRNO_MSG(ENOSTR, "Device not a stream"),
++	ERRNO_MSG(ENODATA, "No data available"),
++	ERRNO_MSG(ETIME, "Timer expired"),
++	ERRNO_MSG(ENOSR, "Out of streams resources"),
++	ERRNO_MSG(ENONET, "Machine is not on the network"),
++	ERRNO_MSG(ENOPKG, "Package not installed"),
++	ERRNO_MSG(EREMOTE, "Object is remote"),
++	ERRNO_MSG(ENOLINK, "Link has been severed"),
++	ERRNO_MSG(EADV, "Advertise error"),
++	ERRNO_MSG(ESRMNT, "Srmount error"),
++	ERRNO_MSG(ECOMM, "Communication error on send"),
++	ERRNO_MSG(EPROTO, "Protocol error"),
++	ERRNO_MSG(EMULTIHOP, "Multihop attempted"),
++	ERRNO_MSG(EDOTDOT, "RFS specific error"),
++	ERRNO_MSG(EBADMSG, "Not a data message"),
++	ERRNO_MSG(EOVERFLOW, "Value too large for defined data type"),
++	ERRNO_MSG(ENOTUNIQ, "Name not unique on network"),
++	ERRNO_MSG(EBADFD, "File descriptor in bad state"),
++	ERRNO_MSG(EREMCHG, "Remote address changed"),
++	ERRNO_MSG(ELIBACC, "Can not access a needed shared library"),
++	ERRNO_MSG(ELIBBAD, "Accessing a corrupted shared library"),
++	ERRNO_MSG(ELIBSCN, ".lib section in a.out corrupted"),
++	ERRNO_MSG(ELIBMAX, "Attempting to link in too many shared libraries"),
++	ERRNO_MSG(ELIBEXEC, "Cannot exec a shared library directly"),
++	ERRNO_MSG(EILSEQ, "Illegal byte sequence"),
++	ERRNO_MSG(ERESTART, "Interrupted system call should be restarted"),
++	ERRNO_MSG(ESTRPIPE, "Streams pipe error"),
++	ERRNO_MSG(EUSERS, "Too many users"),
++	ERRNO_MSG(ENOTSOCK, "Socket operation on non-socket"),
++	ERRNO_MSG(EDESTADDRREQ, "Destination address required"),
++	ERRNO_MSG(EMSGSIZE, "Message too long"),
++	ERRNO_MSG(EPROTOTYPE, "Protocol wrong type for socket"),
++	ERRNO_MSG(ENOPROTOOPT, "Protocol not available"),
++	ERRNO_MSG(EPROTONOSUPPORT, "Protocol not supported"),
++	ERRNO_MSG(ESOCKTNOSUPPORT, "Socket type not supported"),
++	ERRNO_MSG(EOPNOTSUPP, "Operation not supported on transport endpoint"),
++	ERRNO_MSG(EPFNOSUPPORT, "Protocol family not supported"),
++	ERRNO_MSG(AFNOSUPPORT, "Address family not supported by protocol"),
++	ERRNO_MSG(EADDRINUSE, "Address already in use"),
++	ERRNO_MSG(EADDRNOTAVAIL, "Cannot assign requested address"),
++	ERRNO_MSG(ENETDOWN, "Network is down"),
++	ERRNO_MSG(ENETUNREACH, "Network is unreachable"),
++	ERRNO_MSG(ENETRESET, "Network dropped connection because of reset"),
++	ERRNO_MSG(ECONNABORTED, "Software caused connection abort"),
++	ERRNO_MSG(ECONNRESET, "Connection reset by peer"),
++	ERRNO_MSG(ENOBUFS, "No buffer space available"),
++	ERRNO_MSG(EISCONN, "Transport endpoint is already connected"),
++	ERRNO_MSG(ENOTCONN, "Transport endpoint is not connected"),
++	ERRNO_MSG(ESHUTDOWN, "Cannot send after transport endpoint shutdown"),
++	ERRNO_MSG(ETOOMANYREFS, "Too many references: cannot splice"),
++	ERRNO_MSG(ETIMEDOUT, "Connection timed out"),
++	ERRNO_MSG(ECONNREFUSED, "Connection refused"),
++	ERRNO_MSG(EHOSTDOWN, "Host is down"),
++	ERRNO_MSG(EHOSTUNREACH, "No route to host"),
++	ERRNO_MSG(EALREADY, "Operation already in progress"),
++	ERRNO_MSG(EINPROGRESS, "Operation now in progress"),
++	ERRNO_MSG(ESTALE, "Stale NFS file handle"),
++	ERRNO_MSG(EUCLEAN, "Structure needs cleaning"),
++	ERRNO_MSG(ENOTNAM, "Not a XENIX named type file"),
++	ERRNO_MSG(ENAVAIL, "No XENIX semaphores available"),
++	ERRNO_MSG(EISNAM, "Is a named type file"),
++	ERRNO_MSG(EREMOTEIO, "Remote I/O error"),
++	ERRNO_MSG(EDQUOT, "Quota exceeded"),
++	ERRNO_MSG(ENOMEDIUM, "No medium found"),
++	ERRNO_MSG(EMEDIUMTYPE, "Wrong medium type"),
++};
++
++const char *errno_str(int errno)
++{
++	if (errno >= 0)
++		return errno_message[0];
++
++	return errno_message[abs(errno)];
++}
+diff -ruN u-boot-2015.01-rc3/lib/initcall.c u-boot/lib/initcall.c
+--- u-boot-2015.01-rc3/lib/initcall.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/lib/initcall.c	2015-01-01 17:34:32.861493284 +0100
+@@ -19,7 +19,11 @@
+ 
+ 		if (gd->flags & GD_FLG_RELOC)
+ 			reloc_ofs = gd->reloc_off;
+-		debug("initcall: %p\n", (char *)*init_fnc_ptr - reloc_ofs);
++		debug("initcall: %p", (char *)*init_fnc_ptr - reloc_ofs);
++		if (gd->flags & GD_FLG_RELOC)
++			debug(" (relocated to %p)\n", (char *)*init_fnc_ptr);
++		else
++			debug("\n");
+ 		ret = (*init_fnc_ptr)();
+ 		if (ret) {
+ 			printf("initcall sequence %p failed at call %p (err=%d)\n",
+diff -ruN u-boot-2015.01-rc3/lib/Makefile u-boot/lib/Makefile
+--- u-boot-2015.01-rc3/lib/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/lib/Makefile	2015-01-01 17:34:32.857493350 +0100
+@@ -51,6 +51,7 @@
+ obj-$(CONFIG_ADDR_MAP) += addr_map.o
+ obj-y += hashtable.o
+ obj-y += errno.o
++obj-$(CONFIG_ERRNO_STR) += errno_str.o
+ obj-y += display_options.o
+ obj-$(CONFIG_BCH) += bch.o
+ obj-y += crc32.o
+diff -ruN u-boot-2015.01-rc3/lib/string.c u-boot/lib/string.c
+--- u-boot-2015.01-rc3/lib/string.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/lib/string.c	2015-01-01 17:34:32.861493284 +0100
+@@ -102,6 +102,31 @@
+ }
+ #endif
+ 
++#ifndef __HAVE_ARCH_STRLCPY
++/**
++ * strlcpy - Copy a C-string into a sized buffer
++ * @dest: Where to copy the string to
++ * @src: Where to copy the string from
++ * @size: size of destination buffer
++ *
++ * Compatible with *BSD: the result is always a valid
++ * NUL-terminated string that fits in the buffer (unless,
++ * of course, the buffer size is zero). It does not pad
++ * out the result like strncpy() does.
++ */
++size_t strlcpy(char *dest, const char *src, size_t size)
++{
++	size_t ret = strlen(src);
++
++	if (size) {
++		size_t len = (ret >= size) ? size - 1 : ret;
++		memcpy(dest, src, len);
++		dest[len] = '\0';
++	}
++	return ret;
++}
++#endif
++
+ #ifndef __HAVE_ARCH_STRCAT
+ /**
+  * strcat - Append one %NUL-terminated string to another
+diff -ruN u-boot-2015.01-rc3/MAINTAINERS u-boot/MAINTAINERS
+--- u-boot-2015.01-rc3/MAINTAINERS	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/MAINTAINERS	2015-01-01 17:34:31.981507711 +0100
+@@ -128,6 +128,12 @@
+ F:	arch/arm/cpu/arm926ejs/spear/
+ F:	arch/arm/include/asm/arch-spear/
+ 
++ARM STM STV0991
++M:	Vikas Manocha <vikas.manocha@st.com>
++S:	Maintained
++F:	arch/arm/cpu/armv7/stv0991/
++F:	arch/arm/include/asm/arch-stv0991/
++
+ ARM SUNXI
+ M:	Ian Campbell <ijc@hellion.org.uk>
+ M:	Hans De Goede <hdegoede@redhat.com>
+diff -ruN u-boot-2015.01-rc3/Makefile u-boot/Makefile
+--- u-boot-2015.01-rc3/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/Makefile	2015-01-01 17:34:31.981507711 +0100
+@@ -1,7 +1,7 @@
+ VERSION = 2015
+ PATCHLEVEL = 01
+ SUBLEVEL =
+-EXTRAVERSION = -rc3
++EXTRAVERSION = -rc4
+ NAME =
+ 
+ # *DOCUMENTATION*
+@@ -946,27 +946,43 @@
+ ifneq ($(CONFIG_X86_RESET_VECTOR),)
+ rom: u-boot.rom FORCE
+ 
+-u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin \
+-		$(srctree)/board/$(BOARDDIR)/mrc.bin
+-	$(objtree)/tools/ifdtool -c -r $(CONFIG_ROM_SIZE) u-boot.tmp
+-	if [ -n "$(CONFIG_HAVE_INTEL_ME)" ]; then \
+-		$(objtree)/tools/ifdtool -D \
+-			$(srctree)/board/$(BOARDDIR)/descriptor.bin u-boot.tmp; \
+-		$(objtree)/tools/ifdtool \
+-			-i ME:$(srctree)/board/$(BOARDDIR)/me.bin u-boot.tmp; \
+-	fi
+-	$(objtree)/tools/ifdtool -w \
+-		$(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-dtb.bin u-boot.tmp
+-	$(objtree)/tools/ifdtool -w \
+-		$(CONFIG_X86_MRC_START):$(srctree)/board/$(BOARDDIR)/mrc.bin \
+-		u-boot.tmp
+-	$(objtree)/tools/ifdtool -w \
+-		$(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin \
+-		u-boot.tmp
+-	$(objtree)/tools/ifdtool -w \
+-		$(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILENAME) \
+-		u-boot.tmp
+-	mv u-boot.tmp $@
++IFDTOOL=$(objtree)/tools/ifdtool
++IFDTOOL_FLAGS  = -f 0:$(objtree)/u-boot.dtb
++IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
++IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin
++IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
++
++ifneq ($(CONFIG_HAVE_INTEL_ME),)
++IFDTOOL_ME_FLAGS  = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
++IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
++endif
++
++ifneq ($(CONFIG_HAVE_MRC),)
++IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
++endif
++
++ifneq ($(CONFIG_HAVE_FSP),)
++IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
++endif
++
++ifneq ($(CONFIG_HAVE_CMC),)
++IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
++endif
++
++ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),)
++IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILE)
++endif
++
++quiet_cmd_ifdtool = IFDTOOL $@
++cmd_ifdtool  = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
++ifneq ($(CONFIG_HAVE_INTEL_ME),)
++cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
++endif
++cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
++cmd_ifdtool += mv u-boot.tmp $@
++
++u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin
++	$(call if_changed,ifdtool)
+ 
+ OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
+ u-boot-x86-16bit.bin: u-boot FORCE
+@@ -999,15 +1015,22 @@
+ #concatenated with u-boot binary. It is need by PowerPC SoC having
+ #internal SRAM <= 512KB.
+ MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
+-		-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
++		-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
++		-A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
+ 
+ spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
+ 	$(call if_changed,mkimage)
+ 
++ifeq ($(ARCH),arm)
++UBOOT_BINLOAD := u-boot.img
++else
++UBOOT_BINLOAD := u-boot.bin
++endif
++
+ OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
+ 			  --gap-fill=0xff
+ 
+-u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE
++u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
+ 	$(call if_changed,pad_cat)
+ 
+ # PPC4xx needs the SPL at the end of the image, since the reset vector
+diff -ruN u-boot-2015.01-rc3/README u-boot/README
+--- u-boot-2015.01-rc3/README	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/README	2015-01-01 17:34:31.985507645 +0100
+@@ -1773,6 +1773,15 @@
+ 		regarding the non-volatile storage device. Define this to
+ 		the eMMC device that fastboot should use to store the image.
+ 
++		CONFIG_FASTBOOT_GPT_NAME
++		The fastboot "flash" command supports writing the downloaded
++		image to the Protective MBR and the Primary GUID Partition
++		Table. (Additionally, this downloaded image is post-processed
++		to generate and write the Backup GUID Partition Table.)
++		This occurs when the specified "partition name" on the
++		"fastboot flash" command line matches this value.
++		Default is GPT_ENTRY_NAME (currently "gpt") if undefined.
++
+ - Journaling Flash filesystem support:
+ 		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
+ 		CONFIG_JFFS2_NAND_DEV
+diff -ruN u-boot-2015.01-rc3/scripts/binutils-version.sh u-boot/scripts/binutils-version.sh
+--- u-boot-2015.01-rc3/scripts/binutils-version.sh	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/scripts/binutils-version.sh	2015-01-01 17:34:32.877493022 +0100
+@@ -14,7 +14,9 @@
+ 	exit 1
+ fi
+ 
+-MAJOR=$($gas --version | head -1 | awk '{print $NF}' | cut -d . -f 1)
+-MINOR=$($gas --version | head -1 | awk '{print $NF}' | cut -d . -f 2)
++version_string=$($gas --version | head -1 | sed -e 's/.*) *\([0-9.]*\).*/\1/' )
++
++MAJOR=$(echo $version_string | cut -d . -f 1)
++MINOR=$(echo $version_string | cut -d . -f 2)
+ 
+ printf "%02d%02d\\n" $MAJOR $MINOR
+diff -ruN u-boot-2015.01-rc3/snapshot.commit u-boot/snapshot.commit
+--- u-boot-2015.01-rc3/snapshot.commit	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/snapshot.commit	2015-01-01 17:34:32.885492891 +0100
+@@ -1 +1 @@
+-32fdf0e4d82bdca5d64d86330e461e59685f9959  Mon, 8 Dec 2014 16:35:08 -0500
++$Format:%H  %cD$
+diff -ruN u-boot-2015.01-rc3/test/dm/cmd_dm.c u-boot/test/dm/cmd_dm.c
+--- u-boot-2015.01-rc3/test/dm/cmd_dm.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/test/dm/cmd_dm.c	2015-01-01 17:34:32.885492891 +0100
+@@ -16,17 +16,65 @@
+ #include <dm/test.h>
+ #include <dm/uclass-internal.h>
+ 
++static void show_devices(struct udevice *dev, int depth, int last_flag)
++{
++	int i, is_last;
++	struct udevice *child;
++	char class_name[12];
++
++	/* print the first 11 characters to not break the tree-format. */
++	strlcpy(class_name, dev->uclass->uc_drv->name, sizeof(class_name));
++	printf(" %-11s [ %c ]    ", class_name,
++	       dev->flags & DM_FLAG_ACTIVATED ? '+' : ' ');
++
++	for (i = depth; i >= 0; i--) {
++		is_last = (last_flag >> i) & 1;
++		if (i) {
++			if (is_last)
++				printf("    ");
++			else
++				printf("|   ");
++		} else {
++			if (is_last)
++				printf("`-- ");
++			else
++				printf("|-- ");
++		}
++	}
++
++	printf("%s\n", dev->name);
++
++	list_for_each_entry(child, &dev->child_head, sibling_node) {
++		is_last = list_is_last(&child->sibling_node, &dev->child_head);
++		show_devices(child, depth + 1, (last_flag << 1) | is_last);
++	}
++}
++
++static int do_dm_dump_all(cmd_tbl_t *cmdtp, int flag, int argc,
++			  char * const argv[])
++{
++	struct udevice *root;
++
++	root = dm_root();
++	if (root) {
++		printf(" Class       Probed   Name\n");
++		printf("----------------------------------------\n");
++		show_devices(root, -1, 0);
++	}
++
++	return 0;
++}
++
+ /**
+  * dm_display_line() - Display information about a single device
+  *
+  * Displays a single line of information with an option prefix
+  *
+  * @dev:	Device to display
+- * @buf:	Prefix to display at the start of the line
+  */
+-static void dm_display_line(struct udevice *dev, char *buf)
++static void dm_display_line(struct udevice *dev)
+ {
+-	printf("%s- %c %s @ %08lx", buf,
++	printf("- %c %s @ %08lx",
+ 	       dev->flags & DM_FLAG_ACTIVATED ? '*' : ' ',
+ 	       dev->name, (ulong)map_to_sysmem(dev));
+ 	if (dev->req_seq != -1)
+@@ -34,53 +82,6 @@
+ 	puts("\n");
+ }
+ 
+-static int display_succ(struct udevice *in, char *buf)
+-{
+-	int len;
+-	int ip = 0;
+-	char local[16];
+-	struct udevice *pos, *n, *prev = NULL;
+-
+-	dm_display_line(in, buf);
+-
+-	if (list_empty(&in->child_head))
+-		return 0;
+-
+-	len = strlen(buf);
+-	strncpy(local, buf, sizeof(local));
+-	snprintf(local + len, 2, "|");
+-	if (len && local[len - 1] == '`')
+-		local[len - 1] = ' ';
+-
+-	list_for_each_entry_safe(pos, n, &in->child_head, sibling_node) {
+-		if (ip++)
+-			display_succ(prev, local);
+-		prev = pos;
+-	}
+-
+-	snprintf(local + len, 2, "`");
+-	display_succ(prev, local);
+-
+-	return 0;
+-}
+-
+-static int dm_dump(struct udevice *dev)
+-{
+-	if (!dev)
+-		return -EINVAL;
+-	return display_succ(dev, "");
+-}
+-
+-static int do_dm_dump_all(cmd_tbl_t *cmdtp, int flag, int argc,
+-			  char * const argv[])
+-{
+-	struct udevice *root;
+-
+-	root = dm_root();
+-	printf("ROOT %08lx\n", (ulong)map_to_sysmem(root));
+-	return dm_dump(root);
+-}
+-
+ static int do_dm_dump_uclass(cmd_tbl_t *cmdtp, int flag, int argc,
+ 			     char * const argv[])
+ {
+@@ -99,7 +100,7 @@
+ 		if (list_empty(&uc->dev_head))
+ 			continue;
+ 		list_for_each_entry(dev, &uc->dev_head, uclass_node) {
+-			dm_display_line(dev, "");
++			dm_display_line(dev);
+ 		}
+ 		puts("\n");
+ 	}
+diff -ruN u-boot-2015.01-rc3/test/dm/i2c.c u-boot/test/dm/i2c.c
+--- u-boot-2015.01-rc3/test/dm/i2c.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/test/dm/i2c.c	2015-01-01 17:34:32.885492891 +0100
+@@ -0,0 +1,216 @@
++/*
++ * Copyright (C) 2013 Google, Inc
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ *
++ * Note: Test coverage does not include 10-bit addressing
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <fdtdec.h>
++#include <i2c.h>
++#include <dm/device-internal.h>
++#include <dm/test.h>
++#include <dm/uclass-internal.h>
++#include <dm/ut.h>
++#include <dm/util.h>
++#include <asm/state.h>
++#include <asm/test.h>
++
++static const int busnum;
++static const int chip = 0x2c;
++
++/* Test that we can find buses and chips */
++static int dm_test_i2c_find(struct dm_test_state *dms)
++{
++	struct udevice *bus, *dev;
++	const int no_chip = 0x10;
++
++	ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_I2C, busnum,
++						       false, &bus));
++
++	/*
++	 * i2c_post_bind() will bind devices to chip selects. Check this then
++	 * remove the emulation and the slave device.
++	 */
++	ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
++	ut_assertok(i2c_probe(bus, chip, 0, &dev));
++	ut_asserteq(-ENODEV, i2c_probe(bus, no_chip, 0, &dev));
++	ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_I2C, 1, &bus));
++
++	return 0;
++}
++DM_TEST(dm_test_i2c_find, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
++
++static int dm_test_i2c_read_write(struct dm_test_state *dms)
++{
++	struct udevice *bus, *dev;
++	uint8_t buf[5];
++
++	ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
++	ut_assertok(i2c_get_chip(bus, chip, &dev));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
++	ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(memcmp(buf, "\0\0AB\0", sizeof(buf)));
++
++	return 0;
++}
++DM_TEST(dm_test_i2c_read_write, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
++
++static int dm_test_i2c_speed(struct dm_test_state *dms)
++{
++	struct udevice *bus, *dev;
++	uint8_t buf[5];
++
++	ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
++	ut_assertok(i2c_get_chip(bus, chip, &dev));
++	ut_assertok(i2c_set_bus_speed(bus, 100000));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(i2c_set_bus_speed(bus, 400000));
++	ut_asserteq(400000, i2c_get_bus_speed(bus));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_asserteq(-EINVAL, i2c_write(dev, 0, buf, 5));
++
++	return 0;
++}
++DM_TEST(dm_test_i2c_speed, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
++
++static int dm_test_i2c_offset_len(struct dm_test_state *dms)
++{
++	struct udevice *bus, *dev;
++	uint8_t buf[5];
++
++	ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
++	ut_assertok(i2c_get_chip(bus, chip, &dev));
++	ut_assertok(i2c_set_chip_offset_len(dev, 1));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++
++	/* This is not supported by the uclass */
++	ut_asserteq(-EINVAL, i2c_set_chip_offset_len(dev, 5));
++
++	return 0;
++}
++DM_TEST(dm_test_i2c_offset_len, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
++
++static int dm_test_i2c_probe_empty(struct dm_test_state *dms)
++{
++	struct udevice *bus, *dev;
++
++	ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
++	ut_assertok(i2c_probe(bus, SANDBOX_I2C_TEST_ADDR, 0, &dev));
++
++	return 0;
++}
++DM_TEST(dm_test_i2c_probe_empty, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
++
++static int dm_test_i2c_bytewise(struct dm_test_state *dms)
++{
++	struct udevice *bus, *dev;
++	struct udevice *eeprom;
++	uint8_t buf[5];
++
++	ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
++	ut_assertok(i2c_get_chip(bus, chip, &dev));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
++
++	/* Tell the EEPROM to only read/write one register at a time */
++	ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom));
++	ut_assertnonnull(eeprom);
++	sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_SINGLE_BYTE);
++
++	/* Now we only get the first byte - the rest will be 0xff */
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
++
++	/* If we do a separate transaction for each byte, it works */
++	ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
++
++	/* This will only write A */
++	ut_assertok(i2c_set_chip_flags(dev, 0));
++	ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
++
++	/* Check that the B was ignored */
++	ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(memcmp(buf, "\0\0A\0\0\0", sizeof(buf)));
++
++	/* Now write it again with the new flags, it should work */
++	ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS));
++	ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
++
++	ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS |
++						DM_I2C_CHIP_RD_ADDRESS));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(memcmp(buf, "\0\0AB\0\0", sizeof(buf)));
++
++	/* Restore defaults */
++	sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_NONE);
++	ut_assertok(i2c_set_chip_flags(dev, 0));
++
++	return 0;
++}
++DM_TEST(dm_test_i2c_bytewise, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
++
++static int dm_test_i2c_offset(struct dm_test_state *dms)
++{
++	struct udevice *eeprom;
++	struct udevice *dev;
++	uint8_t buf[5];
++
++	ut_assertok(i2c_get_chip_for_busnum(busnum, chip, &dev));
++
++	/* Do a transfer so we can find the emulator */
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom));
++
++	/* Offset length 0 */
++	sandbox_i2c_eeprom_set_offset_len(eeprom, 0);
++	ut_assertok(i2c_set_chip_offset_len(dev, 0));
++	ut_assertok(i2c_write(dev, 10 /* ignored */, (uint8_t *)"AB", 2));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(memcmp(buf, "AB\0\0\0\0", sizeof(buf)));
++
++	/* Offset length 1 */
++	sandbox_i2c_eeprom_set_offset_len(eeprom, 1);
++	ut_assertok(i2c_set_chip_offset_len(dev, 1));
++	ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
++	ut_assertok(i2c_read(dev, 0, buf, 5));
++	ut_assertok(memcmp(buf, "ABAB\0", sizeof(buf)));
++
++	/* Offset length 2 */
++	sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
++	ut_assertok(i2c_set_chip_offset_len(dev, 2));
++	ut_assertok(i2c_write(dev, 0x210, (uint8_t *)"AB", 2));
++	ut_assertok(i2c_read(dev, 0x210, buf, 5));
++	ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
++
++	/* Offset length 3 */
++	sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
++	ut_assertok(i2c_set_chip_offset_len(dev, 2));
++	ut_assertok(i2c_write(dev, 0x410, (uint8_t *)"AB", 2));
++	ut_assertok(i2c_read(dev, 0x410, buf, 5));
++	ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
++
++	/* Offset length 4 */
++	sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
++	ut_assertok(i2c_set_chip_offset_len(dev, 2));
++	ut_assertok(i2c_write(dev, 0x420, (uint8_t *)"AB", 2));
++	ut_assertok(i2c_read(dev, 0x420, buf, 5));
++	ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
++
++	/* Restore defaults */
++	sandbox_i2c_eeprom_set_offset_len(eeprom, 1);
++
++	return 0;
++}
++DM_TEST(dm_test_i2c_offset, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+diff -ruN u-boot-2015.01-rc3/test/dm/Makefile u-boot/test/dm/Makefile
+--- u-boot-2015.01-rc3/test/dm/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/test/dm/Makefile	2015-01-01 17:34:32.885492891 +0100
+@@ -20,4 +20,5 @@
+ obj-$(CONFIG_DM_GPIO) += gpio.o
+ obj-$(CONFIG_DM_SPI) += spi.o
+ obj-$(CONFIG_DM_SPI_FLASH) += sf.o
++obj-$(CONFIG_DM_I2C) += i2c.o
+ endif
+diff -ruN u-boot-2015.01-rc3/test/dm/test.dts u-boot/test/dm/test.dts
+--- u-boot-2015.01-rc3/test/dm/test.dts	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/test/dm/test.dts	2015-01-01 17:34:32.885492891 +0100
+@@ -93,6 +93,23 @@
+ 		num-gpios = <10>;
+ 	};
+ 
++	i2c@0 {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0>;
++		compatible = "sandbox,i2c";
++		clock-frequency = <100000>;
++		eeprom@2c {
++			reg = <0x2c>;
++			compatible = "i2c-eeprom";
++			emul {
++				compatible = "sandbox,i2c-eeprom";
++				sandbox,filename = "i2c.bin";
++				sandbox,size = <256>;
++			};
++		};
++	};
++
+ 	spi@0 {
+ 		#address-cells = <1>;
+ 		#size-cells = <0>;
+diff -ruN u-boot-2015.01-rc3/test/ums/ums_gadget_test.sh u-boot/test/ums/ums_gadget_test.sh
+--- u-boot-2015.01-rc3/test/ums/ums_gadget_test.sh	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/test/ums/ums_gadget_test.sh	2015-01-01 17:34:32.885492891 +0100
+@@ -11,6 +11,7 @@
+ 
+ COLOUR_RED="\33[31m"
+ COLOUR_GREEN="\33[32m"
++COLOUR_ORANGE="\33[33m"
+ COLOUR_DEFAULT="\33[0m"
+ 
+ DIR=./
+@@ -59,8 +60,15 @@
+     fi
+ 
+     cp ./$1 $MNT_DIR
+-    umount $MNT_DIR
+ 
++    while true; do
++	umount $MNT_DIR > /dev/null 2>&1
++	if [ $? -eq 0 ]; then
++	    break
++	fi
++	printf "$COLOUR_ORANGE\tSleeping to wait for umount...$COLOUR_DEFAULT\n"
++	sleep 1
++    done
+ 
+     echo -n "TX: "
+     calculate_md5sum $1
+diff -ruN u-boot-2015.01-rc3/tools/buildman/README u-boot/tools/buildman/README
+--- u-boot-2015.01-rc3/tools/buildman/README	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/tools/buildman/README	2015-01-01 17:34:32.885492891 +0100
+@@ -42,7 +42,7 @@
+ Buildman is a builder. It is not make, although it runs make. It does not
+ produce any useful output on the terminal while building, except for
+ progress information (except with -v, see below). All the output (errors,
+-warnings and binaries if you are ask for them) is stored in output
++warnings and binaries if you ask for them) is stored in output
+ directories, which you can look at while the build is progressing, or when
+ it is finished.
+ 
+@@ -121,7 +121,7 @@
+ means to build all arm boards except nvidia, freescale and anything ending
+ with 'ball'.
+ 
+-It is convenient to use the -n option to see whaat will be built based on
++It is convenient to use the -n option to see what will be built based on
+ the subset given.
+ 
+ Buildman does not store intermediate object files. It optionally copies
+@@ -371,7 +371,7 @@
+ 
+ 
+ To find out how the build went, ask for a summary with -s. You can do this
+-either before the build completes (presumably in another terminal) or or
++either before the build completes (presumably in another terminal) or
+ afterwards. Let's work through an example of how this is used:
+ 
+ $ ./tools/buildman/buildman -b lcd9b -s
+@@ -439,7 +439,7 @@
+ 
+ At commit 16, the error moves - you can see that the old error at line 120
+ is fixed, but there is a new one at line 126. This is probably only because
+-we added some code and moved the broken line father down the file.
++we added some code and moved the broken line further down the file.
+ 
+ If many boards have the same error, then -e will display the error only
+ once. This makes the output as concise as possible. To see which boards have
+@@ -647,8 +647,8 @@
+ board was built) and by 96 bytes for powerpc. This increase was offset in both
+ cases by reductions in rodata and data/bss.
+ 
+-Shown below the summary lines is the sizes for each board. Below each board
+-is the sizes for each function. This information starts with:
++Shown below the summary lines are the sizes for each board. Below each board
++are the sizes for each function. This information starts with:
+ 
+    add - number of functions added / removed
+    grow - number of functions which grew / shrunk
+@@ -817,7 +817,7 @@
+ This has mostly be written in my spare time as a response to my difficulties
+ in testing large series of patches. Apart from tidying up there is quite a
+ bit of scope for improvement. Things like better error diffs and easier
+-access to log files. Also it would be nice it buildman could 'hunt' for
++access to log files. Also it would be nice if buildman could 'hunt' for
+ problems, perhaps by building a few boards for each arch, or checking
+ commits for changed files and building only boards which use those files.
+ 
+diff -ruN u-boot-2015.01-rc3/tools/ifdtool.c u-boot/tools/ifdtool.c
+--- u-boot-2015.01-rc3/tools/ifdtool.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/tools/ifdtool.c	2015-01-01 17:34:32.893492759 +0100
+@@ -18,6 +18,7 @@
+ #include <unistd.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
++#include <libfdt.h>
+ #include "ifdtool.h"
+ 
+ #undef DEBUG
+@@ -32,6 +33,18 @@
+ #define FLREG_BASE(reg)		((reg & 0x00000fff) << 12);
+ #define FLREG_LIMIT(reg)	(((reg & 0x0fff0000) >> 4) | 0xfff);
+ 
++enum input_file_type_t {
++	IF_normal,
++	IF_fdt,
++	IF_uboot,
++};
++
++struct input_file {
++	char *fname;
++	unsigned int addr;
++	enum input_file_type_t type;
++};
++
+ /**
+  * find_fd() - Find the flash description in the ROM image
+  *
+@@ -54,7 +67,8 @@
+ 		return NULL;
+ 	}
+ 
+-	debug("Found Flash Descriptor signature at 0x%08x\n", i);
++	debug("Found Flash Descriptor signature at 0x%08lx\n",
++	      (char *)ptr - image);
+ 
+ 	return (struct fdbar_t *)ptr;
+ }
+@@ -464,6 +478,16 @@
+ 	return ret;
+ }
+ 
++static int perror_fname(const char *fmt, const char *fname)
++{
++	char msg[strlen(fmt) + strlen(fname) + 1];
++
++	sprintf(msg, fmt, fname);
++	perror(msg);
++
++	return -1;
++}
++
+ /**
+  * write_image() - Write the image to a file
+  *
+@@ -480,10 +504,10 @@
+ 
+ 	new_fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, S_IRUSR |
+ 		      S_IWUSR | S_IRGRP | S_IROTH);
+-	if (write(new_fd, image, size) != size) {
+-		perror("Error while writing");
+-		return -1;
+-	}
++	if (new_fd < 0)
++		return perror_fname("Could not open file '%s'", filename);
++	if (write(new_fd, image, size) != size)
++		return perror_fname("Could not write file '%s'", filename);
+ 	close(new_fd);
+ 
+ 	return 0;
+@@ -585,14 +609,10 @@
+ 	int fd = open(fname, O_RDONLY);
+ 	struct stat buf;
+ 
+-	if (fd == -1) {
+-		perror("Could not open file");
+-		return -1;
+-	}
+-	if (fstat(fd, &buf) == -1) {
+-		perror("Could not stat file");
+-		return -1;
+-	}
++	if (fd == -1)
++		return perror_fname("Could not open file '%s'", fname);
++	if (fstat(fd, &buf) == -1)
++		return perror_fname("Could not stat file '%s'", fname);
+ 	*sizep = buf.st_size;
+ 	debug("File %s is %d bytes\n", fname, *sizep);
+ 
+@@ -686,7 +706,7 @@
+  *			0xffffffff so use an address relative to that. For an
+  *			8MB ROM the start address is 0xfff80000.
+  * @write_fname:	Filename to add to the image
+- * @return 0 if OK, -ve on error
++ * @return number of bytes written if OK, -ve on error
+  */
+ static int write_data(char *image, int size, unsigned int addr,
+ 		      const char *write_fname)
+@@ -698,7 +718,7 @@
+ 	if (write_fd < 0)
+ 		return write_fd;
+ 
+-	offset = addr + size;
++	offset = (uint32_t)(addr + size);
+ 	debug("Writing %s to offset %#x\n", write_fname, offset);
+ 
+ 	if (offset < 0 || offset + write_size > size) {
+@@ -714,6 +734,68 @@
+ 
+ 	close(write_fd);
+ 
++	return write_size;
++}
++
++/**
++ * write_uboot() - Write U-Boot, device tree and microcode pointer
++ *
++ * This writes U-Boot into a place in the flash, followed by its device tree.
++ * The microcode pointer is written so that U-Boot can find the microcode in
++ * the device tree very early in boot.
++ *
++ * @image:	Pointer to image
++ * @size:	Size of image in bytes
++ * @uboot:	Input file information for u-boot.bin
++ * @fdt:	Input file information for u-boot.dtb
++ * @ucode_ptr:	Address in U-Boot where the microcode pointer should be placed
++ * @return 0 if OK, -ve on error
++ */
++static int write_uboot(char *image, int size, struct input_file *uboot,
++		       struct input_file *fdt, unsigned int ucode_ptr)
++{
++	const void *blob;
++	const char *data;
++	int uboot_size;
++	uint32_t *ptr;
++	int data_size;
++	int offset;
++	int node;
++	int ret;
++
++	uboot_size = write_data(image, size, uboot->addr, uboot->fname);
++	if (uboot_size < 0)
++		return uboot_size;
++	fdt->addr = uboot->addr + uboot_size;
++	debug("U-Boot size %#x, FDT at %#x\n", uboot_size, fdt->addr);
++	ret = write_data(image, size, fdt->addr, fdt->fname);
++	if (ret < 0)
++		return ret;
++
++	if (ucode_ptr) {
++		blob = (void *)image + (uint32_t)(fdt->addr + size);
++		debug("DTB at %lx\n", (char *)blob - image);
++		node = fdt_node_offset_by_compatible(blob, 0,
++						     "intel,microcode");
++		if (node < 0) {
++			debug("No microcode found in FDT: %s\n",
++			      fdt_strerror(node));
++			return -ENOENT;
++		}
++		data = fdt_getprop(blob, node, "data", &data_size);
++		if (!data) {
++			debug("No microcode data found in FDT: %s\n",
++			      fdt_strerror(data_size));
++			return -ENOENT;
++		}
++		offset = ucode_ptr - uboot->addr;
++		ptr = (void *)image + offset;
++		ptr[0] = uboot->addr + (data - image);
++		ptr[1] = data_size;
++		debug("Wrote microcode pointer at %x: addr=%x, size=%x\n",
++		      ucode_ptr, ptr[0], ptr[1]);
++	}
++
+ 	return 0;
+ }
+ 
+@@ -732,6 +814,7 @@
+ 	       "   -x | --extract:                   extract intel fd modules\n"
+ 	       "   -i | --inject <region>:<module>   inject file <module> into region <region>\n"
+ 	       "   -w | --write <addr>:<file>        write file to appear at memory address <addr>\n"
++	       "                                     multiple files can be written simultaneously\n"
+ 	       "   -s | --spifreq <20|33|50>         set the SPI frequency\n"
+ 	       "   -e | --em100                      set SPI frequency to 20MHz and disable\n"
+ 	       "                                     Dual Output Fast Read Support\n"
+@@ -778,17 +861,20 @@
+ 	int mode_spifreq = 0, mode_em100 = 0, mode_locked = 0;
+ 	int mode_unlocked = 0, mode_write = 0, mode_write_descriptor = 0;
+ 	int create = 0;
+-	char *region_type_string = NULL, *src_fname = NULL;
+-	char *addr_str = NULL;
++	char *region_type_string = NULL, *inject_fname = NULL;
++	char *desc_fname = NULL, *addr_str = NULL;
+ 	int region_type = -1, inputfreq = 0;
+ 	enum spi_frequency spifreq = SPI_FREQUENCY_20MHZ;
+-	unsigned int addr = 0;
++	struct input_file input_file[WRITE_MAX], *ifile, *fdt = NULL;
++	unsigned char wr_idx, wr_num = 0;
+ 	int rom_size = -1;
+ 	bool write_it;
+ 	char *filename;
+ 	char *outfile = NULL;
+ 	struct stat buf;
+ 	int size = 0;
++	unsigned int ucode_ptr = 0;
++	bool have_uboot = false;
+ 	int bios_fd;
+ 	char *image;
+ 	int ret;
+@@ -798,18 +884,21 @@
+ 		{"descriptor", 1, NULL, 'D'},
+ 		{"em100", 0, NULL, 'e'},
+ 		{"extract", 0, NULL, 'x'},
++		{"fdt", 1, NULL, 'f'},
+ 		{"inject", 1, NULL, 'i'},
+ 		{"lock", 0, NULL, 'l'},
++		{"microcode", 1, NULL, 'm'},
+ 		{"romsize", 1, NULL, 'r'},
+ 		{"spifreq", 1, NULL, 's'},
+ 		{"unlock", 0, NULL, 'u'},
++		{"uboot", 1, NULL, 'U'},
+ 		{"write", 1, NULL, 'w'},
+ 		{"version", 0, NULL, 'v'},
+ 		{"help", 0, NULL, 'h'},
+ 		{0, 0, 0, 0}
+ 	};
+ 
+-	while ((opt = getopt_long(argc, argv, "cdD:ehi:lr:s:uvw:x?",
++	while ((opt = getopt_long(argc, argv, "cdD:ef:hi:lm:r:s:uU:vw:x?",
+ 				  long_options, &option_index)) != EOF) {
+ 		switch (opt) {
+ 		case 'c':
+@@ -820,14 +909,14 @@
+ 			break;
+ 		case 'D':
+ 			mode_write_descriptor = 1;
+-			src_fname = optarg;
++			desc_fname = optarg;
+ 			break;
+ 		case 'e':
+ 			mode_em100 = 1;
+ 			break;
+ 		case 'i':
+ 			if (get_two_words(optarg, &region_type_string,
+-					  &src_fname)) {
++					  &inject_fname)) {
+ 				print_usage(argv[0]);
+ 				exit(EXIT_FAILURE);
+ 			}
+@@ -852,6 +941,9 @@
+ 		case 'l':
+ 			mode_locked = 1;
+ 			break;
++		case 'm':
++			ucode_ptr = strtoul(optarg, NULL, 0);
++			break;
+ 		case 'r':
+ 			rom_size = strtol(optarg, NULL, 0);
+ 			debug("ROM size %d\n", rom_size);
+@@ -885,12 +977,29 @@
+ 			exit(EXIT_SUCCESS);
+ 			break;
+ 		case 'w':
++		case 'U':
++		case 'f':
++			ifile = &input_file[wr_num];
+ 			mode_write = 1;
+-			if (get_two_words(optarg, &addr_str, &src_fname)) {
+-				print_usage(argv[0]);
+-				exit(EXIT_FAILURE);
++			if (wr_num < WRITE_MAX) {
++				if (get_two_words(optarg, &addr_str,
++						  &ifile->fname)) {
++					print_usage(argv[0]);
++					exit(EXIT_FAILURE);
++				}
++				ifile->addr = strtol(optarg, NULL, 0);
++				ifile->type = opt == 'f' ? IF_fdt :
++					opt == 'U' ? IF_uboot : IF_normal;
++				if (ifile->type == IF_fdt)
++					fdt = ifile;
++				else if (ifile->type == IF_uboot)
++					have_uboot = true;
++				wr_num++;
++			} else {
++				fprintf(stderr,
++					"The number of files to write simultaneously exceeds the limitation (%d)\n",
++					WRITE_MAX);
+ 			}
+-			addr = strtol(optarg, NULL, 0);
+ 			break;
+ 		case 'x':
+ 			mode_extract = 1;
+@@ -941,6 +1050,13 @@
+ 		exit(EXIT_FAILURE);
+ 	}
+ 
++	if (have_uboot && !fdt) {
++		fprintf(stderr,
++			"You must supply a device tree file for U-Boot\n\n");
++		print_usage(argv[0]);
++		exit(EXIT_FAILURE);
++	}
++
+ 	filename = argv[optind];
+ 	if (optind + 2 != argc)
+ 		outfile = argv[optind + 1];
+@@ -997,13 +1113,27 @@
+ 	}
+ 
+ 	if (mode_write_descriptor)
+-		ret = write_data(image, size, -size, src_fname);
++		ret = write_data(image, size, -size, desc_fname);
+ 
+ 	if (mode_inject)
+-		ret = inject_region(image, size, region_type, src_fname);
++		ret = inject_region(image, size, region_type, inject_fname);
+ 
+-	if (mode_write)
+-		ret = write_data(image, size, addr, src_fname);
++	if (mode_write) {
++		for (wr_idx = 0; wr_idx < wr_num; wr_idx++) {
++			ifile = &input_file[wr_idx];
++			if (ifile->type == IF_fdt) {
++				continue;
++			} else if (ifile->type == IF_uboot) {
++				ret = write_uboot(image, size, ifile, fdt,
++						  ucode_ptr);
++			} else {
++				ret = write_data(image, size, ifile->addr,
++					 ifile->fname);
++			}
++			if (ret < 0)
++				break;
++		}
++	}
+ 
+ 	if (mode_spifreq)
+ 		set_spi_frequency(image, size, spifreq);
+@@ -1035,5 +1165,5 @@
+ 	free(image);
+ 	close(bios_fd);
+ 
+-	return ret ? 1 : 0;
++	return ret < 0 ? 1 : 0;
+ }
+diff -ruN u-boot-2015.01-rc3/tools/ifdtool.h u-boot/tools/ifdtool.h
+--- u-boot-2015.01-rc3/tools/ifdtool.h	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/tools/ifdtool.h	2015-01-01 17:34:32.893492759 +0100
+@@ -14,6 +14,8 @@
+ 
+ #define IFDTOOL_VERSION "1.1-U-Boot"
+ 
++#define WRITE_MAX	16
++
+ enum spi_frequency {
+ 	SPI_FREQUENCY_20MHZ = 0,
+ 	SPI_FREQUENCY_33MHZ = 1,
+diff -ruN u-boot-2015.01-rc3/tools/Makefile u-boot/tools/Makefile
+--- u-boot-2015.01-rc3/tools/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/tools/Makefile	2015-01-01 17:34:32.885492891 +0100
+@@ -126,6 +126,7 @@
+ hostprogs-$(CONFIG_EXYNOS5420) += mkexynosspl
+ HOSTCFLAGS_mkexynosspl.o := -pedantic
+ 
++ifdtool-objs := $(LIBFDT_OBJS) ifdtool.o
+ hostprogs-$(CONFIG_X86) += ifdtool
+ 
+ hostprogs-$(CONFIG_MX23) += mxsboot
+diff -ruN u-boot-2015.01-rc3/tools/microcode-tool u-boot/tools/microcode-tool
+--- u-boot-2015.01-rc3/tools/microcode-tool	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/tools/microcode-tool	2015-01-01 17:34:32.897492694 +0100
+@@ -0,0 +1,253 @@
++#!/usr/bin/env python
++#
++# Copyright (c) 2014 Google, Inc
++#
++# SPDX-License-Identifier:      GPL-2.0+
++#
++# Intel microcode update tool
++
++from optparse import OptionParser
++import os
++import re
++import struct
++import sys
++
++MICROCODE_DIR = 'arch/x86/dts/microcode'
++
++class Microcode:
++    """Holds information about the microcode for a particular model of CPU.
++
++    Attributes:
++        name:  Name of the CPU this microcode is for, including any version
++                   information (e.g. 'm12206a7_00000029')
++        model: Model code string (this is cpuid(1).eax, e.g. '206a7')
++        words: List of hex words containing the microcode. The first 16 words
++                   are the public header.
++    """
++    def __init__(self, name, data):
++        self.name = name
++        # Convert data into a list of hex words
++        self.words = []
++        for value in ''.join(data).split(','):
++            hexval = value.strip()
++            if hexval:
++                self.words.append(int(hexval, 0))
++
++        # The model is in the 4rd hex word
++        self.model = '%x' % self.words[3]
++
++def ParseFile(fname):
++    """Parse a micrcode.dat file and return the component parts
++
++    Args:
++        fname: Filename to parse
++    Returns:
++        3-Tuple:
++            date:         String containing date from the file's header
++            license_text: List of text lines for the license file
++            microcodes:   List of Microcode objects from the file
++    """
++    re_date = re.compile('/\* *(.* [0-9]{4}) *\*/$')
++    re_license = re.compile('/[^-*+] *(.*)$')
++    re_name = re.compile('/\* *(.*)\.inc *\*/', re.IGNORECASE)
++    microcodes = {}
++    license_text = []
++    date = ''
++    data = []
++    name = None
++    with open(fname) as fd:
++        for line in fd:
++            line = line.rstrip()
++            m_date = re_date.match(line)
++            m_license = re_license.match(line)
++            m_name = re_name.match(line)
++            if m_name:
++                if name:
++                    microcodes[name] = Microcode(name, data)
++                name = m_name.group(1).lower()
++                data = []
++            elif m_license:
++                license_text.append(m_license.group(1))
++            elif m_date:
++                date = m_date.group(1)
++            else:
++                data.append(line)
++    if name:
++        microcodes[name] = Microcode(name, data)
++    return date, license_text, microcodes
++
++def List(date, microcodes, model):
++    """List the available microcode chunks
++
++    Args:
++        date:           Date of the microcode file
++        microcodes:     Dict of Microcode objects indexed by name
++        model:          Model string to search for, or None
++    """
++    print 'Date: %s' % date
++    if model:
++        mcode_list, tried = FindMicrocode(microcodes, model.lower())
++        print 'Matching models %s:' % (', '.join(tried))
++    else:
++        print 'All models:'
++        mcode_list = [microcodes[m] for m in microcodes.keys()]
++    for mcode in mcode_list:
++        print '%-20s: model %s' % (mcode.name, mcode.model)
++
++def FindMicrocode(microcodes, model):
++    """Find all the microcode chunks which match the given model.
++
++    This model is something like 306a9 (the value returned in eax from
++    cpuid(1) when running on Intel CPUs). But we allow a partial match,
++    omitting the last 1 or two characters to allow many families to have the
++    same microcode.
++
++    If the model name is ambiguous we return a list of matches.
++
++    Args:
++        microcodes: Dict of Microcode objects indexed by name
++        model:      String containing model name to find
++    Returns:
++        Tuple:
++            List of matching Microcode objects
++            List of abbreviations we tried
++    """
++    # Allow a full name to be used
++    mcode = microcodes.get(model)
++    if mcode:
++        return [mcode], []
++
++    tried = []
++    found = []
++    for i in range(3):
++        abbrev = model[:-i] if i else model
++        tried.append(abbrev)
++        for mcode in microcodes.values():
++            if mcode.model.startswith(abbrev):
++                found.append(mcode)
++        if found:
++            break
++    return found, tried
++
++def CreateFile(date, license_text, mcode, outfile):
++    """Create a microcode file in U-Boot's .dtsi format
++
++    Args:
++        date:       String containing date of original microcode file
++        license:    List of text lines for the license file
++        mcode:      Microcode object to write
++        outfile:    Filename to write to ('-' for stdout)
++    """
++    out = '''/*%s
++ * ---
++ * This is a device tree fragment. Use #include to add these properties to a
++ * node.
++ *
++ * Date: %s
++ */
++
++compatible = "intel,microcode";
++intel,header-version = <%d>;
++intel,update-revision = <%#x>;
++intel,date-code = <%#x>;
++intel,processor-signature = <%#x>;
++intel,checksum = <%#x>;
++intel,loader-revision = <%d>;
++intel,processor-flags = <%#x>;
++
++/* The first 48-bytes are the public header which repeats the above data */
++data = <%s
++\t>;'''
++    words = ''
++    for i in range(len(mcode.words)):
++        if not (i & 3):
++            words += '\n'
++        val = mcode.words[i]
++        # Change each word so it will be little-endian in the FDT
++        # This data is needed before RAM is available on some platforms so we
++        # cannot do an endianness swap on boot.
++        val = struct.unpack("<I", struct.pack(">I", val))[0]
++        words += '\t%#010x' % val
++
++    # Take care to avoid adding a space before a tab
++    text = ''
++    for line in license_text:
++        if line[0] == '\t':
++            text += '\n *' + line
++        else:
++            text += '\n * ' + line
++    args = [text, date]
++    args += [mcode.words[i] for i in range(7)]
++    args.append(words)
++    if outfile == '-':
++        print out % tuple(args)
++    else:
++        if not outfile:
++            if not os.path.exists(MICROCODE_DIR):
++                print >> sys.stderr, "Creating directory '%s'" % MICROCODE_DIR
++                os.makedirs(MICROCODE_DIR)
++            outfile = os.path.join(MICROCODE_DIR, mcode.name + '.dtsi')
++            print >> sys.stderr, "Writing microcode for '%s' to '%s'" % (
++                     mcode.name, outfile)
++        with open(outfile, 'w') as fd:
++            print >> fd, out % tuple(args)
++
++def MicrocodeTool():
++    """Run the microcode tool"""
++    commands = 'create,license,list'.split(',')
++    parser = OptionParser()
++    parser.add_option('-d', '--mcfile', type='string', action='store',
++                    help='Name of microcode.dat file')
++    parser.add_option('-m', '--model', type='string', action='store',
++                    help='Model name to extract')
++    parser.add_option('-o', '--outfile', type='string', action='store',
++                    help='Filename to use for output (- for stdout), default is'
++                    ' %s/<name>.dtsi' % MICROCODE_DIR)
++    parser.usage += """ command
++
++    Process an Intel microcode file (use -h for help). Commands:
++
++       create     Create microcode .dtsi file for a model
++       list       List available models in microcode file
++       license    Print the license
++
++    Typical usage:
++
++       ./tools/microcode-tool -d microcode.dat -m 306a create
++
++    This will find the appropriate file and write it to %s.""" % MICROCODE_DIR
++
++    (options, args) = parser.parse_args()
++    if not args:
++        parser.error('Please specify a command')
++    cmd = args[0]
++    if cmd not in commands:
++        parser.error("Unknown command '%s'" % cmd)
++
++    if not options.mcfile:
++        parser.error('You must specify a microcode file')
++    date, license_text, microcodes = ParseFile(options.mcfile)
++
++    if cmd == 'list':
++        List(date, microcodes, options.model)
++    elif cmd == 'license':
++        print '\n'.join(license_text)
++    elif cmd == 'create':
++        if not options.model:
++            parser.error('You must specify a model to create')
++        model = options.model.lower()
++        mcode_list, tried = FindMicrocode(microcodes, model)
++        if not mcode_list:
++            parser.error("Unknown model '%s' (%s) - try 'list' to list" %
++                        (model, ', '.join(tried)))
++        if len(mcode_list) > 1:
++            parser.error("Ambiguous model '%s' (%s) matched %s - try 'list' "
++                        "to list or specify a particular file" %
++                        (model, ', '.join(tried),
++                        ', '.join([m.name for m in mcode_list])))
++        CreateFile(date, license_text, mcode_list[0], options.outfile)
++    else:
++        parser.error("Unknown command '%s'" % cmd)
++
++if __name__ == "__main__":
++    MicrocodeTool()
+diff -ruN u-boot-2015.01-rc3/tools/microcode-tool.py u-boot/tools/microcode-tool.py
+--- u-boot-2015.01-rc3/tools/microcode-tool.py	1970-01-01 01:00:00.000000000 +0100
++++ u-boot/tools/microcode-tool.py	2015-01-01 17:34:32.897492694 +0100
+@@ -0,0 +1,253 @@
++#!/usr/bin/env python
++#
++# Copyright (c) 2014 Google, Inc
++#
++# SPDX-License-Identifier:      GPL-2.0+
++#
++# Intel microcode update tool
++
++from optparse import OptionParser
++import os
++import re
++import struct
++import sys
++
++MICROCODE_DIR = 'arch/x86/dts/microcode'
++
++class Microcode:
++    """Holds information about the microcode for a particular model of CPU.
++
++    Attributes:
++        name:  Name of the CPU this microcode is for, including any version
++                   information (e.g. 'm12206a7_00000029')
++        model: Model code string (this is cpuid(1).eax, e.g. '206a7')
++        words: List of hex words containing the microcode. The first 16 words
++                   are the public header.
++    """
++    def __init__(self, name, data):
++        self.name = name
++        # Convert data into a list of hex words
++        self.words = []
++        for value in ''.join(data).split(','):
++            hexval = value.strip()
++            if hexval:
++                self.words.append(int(hexval, 0))
++
++        # The model is in the 4rd hex word
++        self.model = '%x' % self.words[3]
++
++def ParseFile(fname):
++    """Parse a micrcode.dat file and return the component parts
++
++    Args:
++        fname: Filename to parse
++    Returns:
++        3-Tuple:
++            date:         String containing date from the file's header
++            license_text: List of text lines for the license file
++            microcodes:   List of Microcode objects from the file
++    """
++    re_date = re.compile('/\* *(.* [0-9]{4}) *\*/$')
++    re_license = re.compile('/[^-*+] *(.*)$')
++    re_name = re.compile('/\* *(.*)\.inc *\*/', re.IGNORECASE)
++    microcodes = {}
++    license_text = []
++    date = ''
++    data = []
++    name = None
++    with open(fname) as fd:
++        for line in fd:
++            line = line.rstrip()
++            m_date = re_date.match(line)
++            m_license = re_license.match(line)
++            m_name = re_name.match(line)
++            if m_name:
++                if name:
++                    microcodes[name] = Microcode(name, data)
++                name = m_name.group(1).lower()
++                data = []
++            elif m_license:
++                license_text.append(m_license.group(1))
++            elif m_date:
++                date = m_date.group(1)
++            else:
++                data.append(line)
++    if name:
++        microcodes[name] = Microcode(name, data)
++    return date, license_text, microcodes
++
++def List(date, microcodes, model):
++    """List the available microcode chunks
++
++    Args:
++        date:           Date of the microcode file
++        microcodes:     Dict of Microcode objects indexed by name
++        model:          Model string to search for, or None
++    """
++    print 'Date: %s' % date
++    if model:
++        mcode_list, tried = FindMicrocode(microcodes, model.lower())
++        print 'Matching models %s:' % (', '.join(tried))
++    else:
++        print 'All models:'
++        mcode_list = [microcodes[m] for m in microcodes.keys()]
++    for mcode in mcode_list:
++        print '%-20s: model %s' % (mcode.name, mcode.model)
++
++def FindMicrocode(microcodes, model):
++    """Find all the microcode chunks which match the given model.
++
++    This model is something like 306a9 (the value returned in eax from
++    cpuid(1) when running on Intel CPUs). But we allow a partial match,
++    omitting the last 1 or two characters to allow many families to have the
++    same microcode.
++
++    If the model name is ambiguous we return a list of matches.
++
++    Args:
++        microcodes: Dict of Microcode objects indexed by name
++        model:      String containing model name to find
++    Returns:
++        Tuple:
++            List of matching Microcode objects
++            List of abbreviations we tried
++    """
++    # Allow a full name to be used
++    mcode = microcodes.get(model)
++    if mcode:
++        return [mcode], []
++
++    tried = []
++    found = []
++    for i in range(3):
++        abbrev = model[:-i] if i else model
++        tried.append(abbrev)
++        for mcode in microcodes.values():
++            if mcode.model.startswith(abbrev):
++                found.append(mcode)
++        if found:
++            break
++    return found, tried
++
++def CreateFile(date, license_text, mcode, outfile):
++    """Create a microcode file in U-Boot's .dtsi format
++
++    Args:
++        date:       String containing date of original microcode file
++        license:    List of text lines for the license file
++        mcode:      Microcode object to write
++        outfile:    Filename to write to ('-' for stdout)
++    """
++    out = '''/*%s
++ * ---
++ * This is a device tree fragment. Use #include to add these properties to a
++ * node.
++ *
++ * Date: %s
++ */
++
++compatible = "intel,microcode";
++intel,header-version = <%d>;
++intel,update-revision = <%#x>;
++intel,date-code = <%#x>;
++intel,processor-signature = <%#x>;
++intel,checksum = <%#x>;
++intel,loader-revision = <%d>;
++intel,processor-flags = <%#x>;
++
++/* The first 48-bytes are the public header which repeats the above data */
++data = <%s
++\t>;'''
++    words = ''
++    for i in range(len(mcode.words)):
++        if not (i & 3):
++            words += '\n'
++        val = mcode.words[i]
++        # Change each word so it will be little-endian in the FDT
++        # This data is needed before RAM is available on some platforms so we
++        # cannot do an endianness swap on boot.
++        val = struct.unpack("<I", struct.pack(">I", val))[0]
++        words += '\t%#010x' % val
++
++    # Take care to avoid adding a space before a tab
++    text = ''
++    for line in license_text:
++        if line[0] == '\t':
++            text += '\n *' + line
++        else:
++            text += '\n * ' + line
++    args = [text, date]
++    args += [mcode.words[i] for i in range(7)]
++    args.append(words)
++    if outfile == '-':
++        print out % tuple(args)
++    else:
++        if not outfile:
++            if not os.path.exists(MICROCODE_DIR):
++                print >> sys.stderr, "Creating directory '%s'" % MICROCODE_DIR
++                os.makedirs(MICROCODE_DIR)
++            outfile = os.path.join(MICROCODE_DIR, mcode.name + '.dtsi')
++            print >> sys.stderr, "Writing microcode for '%s' to '%s'" % (
++                     mcode.name, outfile)
++        with open(outfile, 'w') as fd:
++            print >> fd, out % tuple(args)
++
++def MicrocodeTool():
++    """Run the microcode tool"""
++    commands = 'create,license,list'.split(',')
++    parser = OptionParser()
++    parser.add_option('-d', '--mcfile', type='string', action='store',
++                    help='Name of microcode.dat file')
++    parser.add_option('-m', '--model', type='string', action='store',
++                    help='Model name to extract')
++    parser.add_option('-o', '--outfile', type='string', action='store',
++                    help='Filename to use for output (- for stdout), default is'
++                    ' %s/<name>.dtsi' % MICROCODE_DIR)
++    parser.usage += """ command
++
++    Process an Intel microcode file (use -h for help). Commands:
++
++       create     Create microcode .dtsi file for a model
++       list       List available models in microcode file
++       license    Print the license
++
++    Typical usage:
++
++       ./tools/microcode-tool -d microcode.dat -m 306a create
++
++    This will find the appropriate file and write it to %s.""" % MICROCODE_DIR
++
++    (options, args) = parser.parse_args()
++    if not args:
++        parser.error('Please specify a command')
++    cmd = args[0]
++    if cmd not in commands:
++        parser.error("Unknown command '%s'" % cmd)
++
++    if not options.mcfile:
++        parser.error('You must specify a microcode file')
++    date, license_text, microcodes = ParseFile(options.mcfile)
++
++    if cmd == 'list':
++        List(date, microcodes, options.model)
++    elif cmd == 'license':
++        print '\n'.join(license_text)
++    elif cmd == 'create':
++        if not options.model:
++            parser.error('You must specify a model to create')
++        model = options.model.lower()
++        mcode_list, tried = FindMicrocode(microcodes, model)
++        if not mcode_list:
++            parser.error("Unknown model '%s' (%s) - try 'list' to list" %
++                        (model, ', '.join(tried)))
++        if len(mcode_list) > 1:
++            parser.error("Ambiguous model '%s' (%s) matched %s - try 'list' "
++                        "to list or specify a particular file" %
++                        (model, ', '.join(tried),
++                        ', '.join([m.name for m in mcode_list])))
++        CreateFile(date, license_text, mcode_list[0], options.outfile)
++    else:
++        parser.error("Unknown command '%s'" % cmd)
++
++if __name__ == "__main__":
++    MicrocodeTool()
+diff -ruN u-boot-2015.01-rc3/tools/pblimage.c u-boot/tools/pblimage.c
+--- u-boot-2015.01-rc3/tools/pblimage.c	2014-12-08 22:35:08.000000000 +0100
++++ u-boot/tools/pblimage.c	2015-01-01 17:34:32.905492563 +0100
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright 2012 Freescale Semiconductor, Inc.
++ * Copyright 2012-2014 Freescale Semiconductor, Inc.
+  *
+  * SPDX-License-Identifier:	GPL-2.0+
+  */
+@@ -8,6 +8,10 @@
+ #include "pblimage.h"
+ #include "pbl_crc32.h"
+ 
++#define roundup(x, y)		((((x) + ((y) - 1)) / (y)) * (y))
++#define PBL_ACS_CONT_CMD	0x81000000
++#define PBL_ADDR_24BIT_MASK	0x00ffffff
++
+ /*
+  * Initialize to an invalid value.
+  */
+@@ -22,6 +26,13 @@
+ static char *fname = "Unknown";
+ static int lineno = -1;
+ static struct pbl_header pblimage_header;
++static int uboot_size;
++static int arch_flag;
++
++static uint32_t pbl_cmd_initaddr;
++static uint32_t pbi_crc_cmd1;
++static uint32_t pbi_crc_cmd2;
++static uint32_t pbl_end_cmd[4];
+ 
+ static union
+ {
+@@ -38,20 +49,6 @@
+  * start offset by subtracting the size of the u-boot image from the
+  * top of the allowable 24-bit range.
+  */
+-static void init_next_pbl_cmd(FILE *fp_uboot)
+-{
+-	struct stat st;
+-	int fd = fileno(fp_uboot);
+-
+-	if (fstat(fd, &st) == -1) {
+-		printf("Error: Could not determine u-boot image size. %s\n",
+-			strerror(errno));
+-		exit(EXIT_FAILURE);
+-	}
+-
+-	next_pbl_cmd = 0x82000000 - st.st_size;
+-}
+-
+ static void generate_pbl_cmd(void)
+ {
+ 	uint32_t val = next_pbl_cmd;
+@@ -66,11 +63,15 @@
+ 
+ static void pbl_fget(size_t size, FILE *stream)
+ {
+-	unsigned char c;
++	unsigned char c = 0xff;
+ 	int c_temp;
+ 
+-	while (size && (c_temp = fgetc(stream)) != EOF) {
+-		c = (unsigned char)c_temp;
++	while (size) {
++		c_temp = fgetc(stream);
++		if (c_temp != EOF)
++			c = (unsigned char)c_temp;
++		else if ((c_temp == EOF) && (arch_flag == IH_ARCH_ARM))
++			c = 0xff;
+ 		*pmem_buf++ = c;
+ 		pbl_size++;
+ 		size--;
+@@ -80,8 +81,8 @@
+ /* load split u-boot with PBI command 81xxxxxx. */
+ static void load_uboot(FILE *fp_uboot)
+ {
+-	init_next_pbl_cmd(fp_uboot);
+-	while (next_pbl_cmd < 0x82000000) {
++	next_pbl_cmd = pbl_cmd_initaddr - uboot_size;
++	while (next_pbl_cmd < pbl_cmd_initaddr) {
+ 		generate_pbl_cmd();
+ 		pbl_fget(64, fp_uboot);
+ 	}
+@@ -154,8 +155,6 @@
+ /* write end command and crc command to memory. */
+ static void add_end_cmd(void)
+ {
+-	uint32_t pbl_end_cmd[4] = {0x09138000, 0x00000000,
+-		0x091380c0, 0x00000000};
+ 	uint32_t crc32_pbl;
+ 	int i;
+ 	unsigned char *p = (unsigned char *)&pbl_end_cmd;
+@@ -172,8 +171,8 @@
+ 
+ 	/* Add PBI CRC command. */
+ 	*pmem_buf++ = 0x08;
+-	*pmem_buf++ = 0x13;
+-	*pmem_buf++ = 0x80;
++	*pmem_buf++ = pbi_crc_cmd1;
++	*pmem_buf++ = pbi_crc_cmd2;
+ 	*pmem_buf++ = 0x40;
+ 	pbl_size += 4;
+ 
+@@ -184,17 +183,6 @@
+ 	*pmem_buf++ = (crc32_pbl >> 8) & 0xff;
+ 	*pmem_buf++ = (crc32_pbl) & 0xff;
+ 	pbl_size += 4;
+-
+-	if ((pbl_size % 16) != 0) {
+-		for (i = 0; i < 8; i++) {
+-			*pmem_buf++ = 0x0;
+-			pbl_size++;
+-		}
+-	}
+-	if ((pbl_size % 16 != 0)) {
+-		printf("Error: Bad size of image file\n");
+-		exit(EXIT_FAILURE);
+-	}
+ }
+ 
+ void pbl_load_uboot(int ifd, struct image_tool_params *params)
+@@ -268,12 +256,64 @@
+ 	/*nothing need to do, pbl_load_uboot takes care of whole file. */
+ }
+ 
++int pblimage_check_params(struct image_tool_params *params)
++{
++	FILE *fp_uboot;
++	int fd;
++	struct stat st;
++
++	if (!params)
++		return EXIT_FAILURE;
++
++	fp_uboot = fopen(params->datafile, "r");
++	if (fp_uboot == NULL) {
++		printf("Error: %s open failed\n", params->datafile);
++		exit(EXIT_FAILURE);
++	}
++	fd = fileno(fp_uboot);
++
++	if (fstat(fd, &st) == -1) {
++		printf("Error: Could not determine u-boot image size. %s\n",
++		       strerror(errno));
++		exit(EXIT_FAILURE);
++	}
++
++	/* For the variable size, we need to pad it to 64 byte boundary */
++	uboot_size = roundup(st.st_size, 64);
++
++	if (params->arch == IH_ARCH_ARM) {
++		arch_flag = IH_ARCH_ARM;
++		pbi_crc_cmd1 = 0x61;
++		pbi_crc_cmd2 = 0;
++		pbl_cmd_initaddr = params->addr & PBL_ADDR_24BIT_MASK;
++		pbl_cmd_initaddr |= PBL_ACS_CONT_CMD;
++		pbl_cmd_initaddr |= uboot_size;
++		pbl_end_cmd[0] = 0x09610000;
++		pbl_end_cmd[1] = 0x00000000;
++		pbl_end_cmd[2] = 0x096100c0;
++		pbl_end_cmd[3] = 0x00000000;
++	} else if (params->arch == IH_ARCH_PPC) {
++		arch_flag = IH_ARCH_PPC;
++		pbi_crc_cmd1 = 0x13;
++		pbi_crc_cmd2 = 0x80;
++		pbl_cmd_initaddr = 0x82000000;
++		pbl_end_cmd[0] = 0x09138000;
++		pbl_end_cmd[1] = 0x00000000;
++		pbl_end_cmd[2] = 0x091380c0;
++		pbl_end_cmd[3] = 0x00000000;
++	}
++
++	next_pbl_cmd = pbl_cmd_initaddr;
++	return 0;
++};
++
+ /* pblimage parameters */
+ static struct image_type_params pblimage_params = {
+ 	.name		= "Freescale PBL Boot Image support",
+ 	.header_size	= sizeof(struct pbl_header),
+ 	.hdr		= (void *)&pblimage_header,
+ 	.check_image_type = pblimage_check_image_types,
++	.check_params	= pblimage_check_params,
+ 	.verify_header	= pblimage_verify_header,
+ 	.print_header	= pblimage_print_header,
+ 	.set_header	= pblimage_set_header,
diff --git a/package/boot/uboot-sunxi/patches/001-uboot-sunxi-509d96d4f1f602d62d36db660973249e16f9d088.patch b/package/boot/uboot-sunxi/patches/001-uboot-sunxi-509d96d4f1f602d62d36db660973249e16f9d088.patch
deleted file mode 100644
index 15aac6b..0000000
--- a/package/boot/uboot-sunxi/patches/001-uboot-sunxi-509d96d4f1f602d62d36db660973249e16f9d088.patch
+++ /dev/null
@@ -1,10002 +0,0 @@
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/cmd_boot.c u-boot-sunxi/arch/arm/cpu/armv7/cmd_boot.c
---- u-boot-2014.04/arch/arm/cpu/armv7/cmd_boot.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/cmd_boot.c	2014-09-06 16:58:35.193953144 +0200
-@@ -0,0 +1,20 @@
-+/*
-+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+/*
-+ * Misc boot support
-+ */
-+#include <common.h>
-+#include <command.h>
-+
-+#ifdef CONFIG_CMD_GO
-+unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
-+				 char * const argv[])
-+{
-+	invalidate_icache_all();
-+	return entry(argc, argv);
-+}
-+#endif
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/Makefile u-boot-sunxi/arch/arm/cpu/armv7/Makefile
---- u-boot-2014.04/arch/arm/cpu/armv7/Makefile	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/arch/arm/cpu/armv7/Makefile	2014-09-06 16:58:35.185953145 +0200
-@@ -11,8 +11,9 @@
- 
- obj-y	+= cpu.o
- obj-y	+= syslib.o
-+obj-y	+= cmd_boot.o
- 
--ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY),)
-+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI),)
- ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
- obj-y	+= lowlevel_init.o
- endif
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/board.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/board.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/board.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/board.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,166 @@
-+/*
-+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * Some init for sunxi platform.
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <i2c.h>
-+#include <netdev.h>
-+#include <miiphy.h>
-+#include <serial.h>
-+#ifdef CONFIG_SPL_BUILD
-+#include <spl.h>
-+#endif
-+#include <asm/gpio.h>
-+#include <asm/io.h>
-+#include <asm/arch/clock.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/sys_proto.h>
-+#include <asm/arch/timer.h>
-+#include <asm/arch/watchdog.h>
-+
-+#ifdef CONFIG_SPL_BUILD
-+/* Pointer to the global data structure for SPL */
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+/* The sunxi internal brom will try to loader external bootloader
-+ * from mmc0, nand flash, mmc2.
-+ * Unfortunately we can't check how SPL was loaded so assume
-+ * it's always the first SD/MMC controller
-+ */
-+u32 spl_boot_device(void)
-+{
-+	return BOOT_DEVICE_MMC1;
-+}
-+
-+/* No confirmation data available in SPL yet. Hardcode bootmode */
-+u32 spl_boot_mode(void)
-+{
-+	return MMCSD_MODE_RAW;
-+}
-+#endif
-+
-+int gpio_init(void)
-+{
-+#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
-+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)
-+	/* disable GPB22,23 as uart0 tx,rx to avoid conflict */
-+	sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
-+#endif
-+	sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX);
-+	sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
-+#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I))
-+	sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
-+	sunxi_gpio_set_pull(SUNXI_GPB(23), 1);
-+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN6I)
-+	sunxi_gpio_set_cfgpin(SUNXI_GPH(20), 2);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPH(21), 2);
-+	sunxi_gpio_set_pull(SUNXI_GPH(21), 1);
-+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I)
-+	sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX);
-+	sunxi_gpio_set_pull(SUNXI_GPB(20), 1);
-+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I)
-+	sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX);
-+	sunxi_gpio_set_pull(SUNXI_GPG(4), 1);
-+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_SUN8I)
-+	sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL2_R_UART_TX);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL3_R_UART_RX);
-+	sunxi_gpio_set_pull(SUNXI_GPL(3), 1);
-+#else
-+#error Unsupported console port number. Please fix pin mux settings in board.c
-+#endif
-+
-+	return 0;
-+}
-+
-+void reset_cpu(ulong addr)
-+{
-+	watchdog_set(0);
-+	while (1);
-+}
-+
-+/* do some early init */
-+void s_init(void)
-+{
-+#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I)
-+	/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
-+	asm volatile(
-+		"mrc p15, 0, r0, c1, c0, 1\n"
-+		"orr r0, r0, #1 << 6\n"
-+		"mcr p15, 0, r0, c1, c0, 1\n");
-+#endif
-+
-+	watchdog_init();
-+	clock_init();
-+	timer_init();
-+	gpio_init();
-+	i2c_init_board();
-+
-+#ifdef CONFIG_SPL_BUILD
-+	gd = &gdata;
-+	preloader_console_init();
-+
-+#ifdef CONFIG_SPL_I2C_SUPPORT
-+	/* Needed early by sunxi_board_init if PMU is enabled */
-+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-+#endif
-+#endif
-+/* No SPL on sun6i, so we do sunxi_board_init() from non spl there */
-+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
-+	sunxi_board_init();
-+#endif
-+}
-+
-+#ifndef CONFIG_SYS_DCACHE_OFF
-+void enable_caches(void)
-+{
-+	/* Enable D-cache. I-cache is already enabled in start.S */
-+	dcache_enable();
-+}
-+#endif
-+
-+#ifdef CONFIG_CMD_NET
-+/*
-+ * Initializes on-chip ethernet controllers.
-+ * to override, implement board_eth_init()
-+ */
-+int cpu_eth_init(bd_t *bis)
-+{
-+	__maybe_unused int rc;
-+
-+#ifdef CONFIG_MACPWR
-+	gpio_direction_output(CONFIG_MACPWR, 1);
-+	mdelay(200);
-+#endif
-+
-+#ifdef CONFIG_SUNXI_EMAC
-+	rc = sunxi_emac_initialize(bis);
-+	if (rc < 0) {
-+		printf("sunxi: failed to initialize emac\n");
-+		return rc;
-+	}
-+#endif
-+
-+#ifdef CONFIG_SUNXI_GMAC
-+	rc = sunxi_gmac_initialize(bis);
-+	if (rc < 0) {
-+		printf("sunxi: failed to initialize gmac\n");
-+		return rc;
-+	}
-+#endif
-+
-+	return 0;
-+}
-+#endif
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,25 @@
-+/*
-+ * (C) Copyright 2007-2012
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/clock.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/sys_proto.h>
-+
-+int clock_init(void)
-+{
-+#ifdef CONFIG_SPL_BUILD
-+	clock_init_safe();
-+#endif
-+	clock_init_uart();
-+
-+	return 0;
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun4i.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun4i.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun4i.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,188 @@
-+/*
-+ * sun4i, sun5i and sun7i specific clock code
-+ *
-+ * (C) Copyright 2007-2012
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/clock.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/sys_proto.h>
-+
-+#ifdef CONFIG_SPL_BUILD
-+void clock_init_safe(void)
-+{
-+	struct sunxi_ccm_reg * const ccm =
-+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+	/* Set safe defaults until PMU is configured */
-+	writel(AXI_DIV_1 << AXI_DIV_SHIFT |
-+	       AHB_DIV_2 << AHB_DIV_SHIFT |
-+	       APB0_DIV_1 << APB0_DIV_SHIFT |
-+	       CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
-+	       &ccm->cpu_ahb_apb0_cfg);
-+	writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg);
-+	sdelay(200);
-+	writel(AXI_DIV_1 << AXI_DIV_SHIFT |
-+	       AHB_DIV_2 << AHB_DIV_SHIFT |
-+	       APB0_DIV_1 << APB0_DIV_SHIFT |
-+	       CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
-+	       &ccm->cpu_ahb_apb0_cfg);
-+#ifdef CONFIG_SUN7I
-+	writel(0x1 << AHB_GATE_OFFSET_DMA | readl(&ccm->ahb_gate0),
-+	       &ccm->ahb_gate0);
-+#endif
-+	writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
-+}
-+#endif
-+
-+void clock_init_uart(void)
-+{
-+	struct sunxi_ccm_reg *const ccm =
-+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+	/* uart clock source is apb1 */
-+	writel(APB1_CLK_SRC_OSC24M|
-+	       APB1_CLK_RATE_N_1|
-+	       APB1_CLK_RATE_M(1),
-+	       &ccm->apb1_clk_div_cfg);
-+
-+	/* open the clock for uart */
-+	setbits_le32(&ccm->apb1_gate,
-+		CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1));
-+}
-+
-+int clock_twi_onoff(int port, int state)
-+{
-+	struct sunxi_ccm_reg *const ccm =
-+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+	if (port > 2)
-+		return -1;
-+
-+	/* set the apb clock gate for twi */
-+	if (state)
-+		setbits_le32(&ccm->apb1_gate,
-+			     CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
-+	else
-+		clrbits_le32(&ccm->apb1_gate,
-+			     CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_SPL_BUILD
-+#define PLL1_CFG(N, K, M, P)	( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \
-+				  0 << CCM_PLL1_CFG_VCO_RST_SHIFT |  \
-+				  8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \
-+				  0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \
-+				 16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \
-+				 (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \
-+				  2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \
-+				 (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \
-+				 (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \
-+				  0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \
-+				  0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \
-+				 (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT)
-+
-+static struct {
-+	u32 pll1_cfg;
-+	unsigned int freq;
-+} pll1_para[] = {
-+	/* This array must be ordered by frequency. */
-+	{ PLL1_CFG(16, 0, 0, 0), 384000000 },
-+	{ PLL1_CFG(16, 1, 0, 0), 768000000 },
-+	{ PLL1_CFG(20, 1, 0, 0), 960000000 },
-+	{ PLL1_CFG(21, 1, 0, 0), 1008000000},
-+	{ PLL1_CFG(22, 1, 0, 0), 1056000000},
-+	{ PLL1_CFG(23, 1, 0, 0), 1104000000},
-+	{ PLL1_CFG(24, 1, 0, 0), 1152000000},
-+	{ PLL1_CFG(25, 1, 0, 0), 1200000000},
-+	{ PLL1_CFG(26, 1, 0, 0), 1248000000},
-+	{ PLL1_CFG(27, 1, 0, 0), 1296000000},
-+	{ PLL1_CFG(28, 1, 0, 0), 1344000000},
-+	{ PLL1_CFG(29, 1, 0, 0), 1392000000},
-+	{ PLL1_CFG(30, 1, 0, 0), 1440000000},
-+	{ PLL1_CFG(31, 1, 0, 0), 1488000000},
-+	/* Final catchall entry */
-+	{ PLL1_CFG(31, 1, 0, 0), ~0},
-+};
-+
-+void clock_set_pll1(unsigned int hz)
-+{
-+	int i = 0;
-+	int axi, ahb, apb0;
-+	struct sunxi_ccm_reg * const ccm =
-+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+	/* Find target frequency */
-+	while (pll1_para[i].freq < hz)
-+		i++;
-+
-+	hz = pll1_para[i].freq;
-+
-+	/* Calculate system clock divisors */
-+	axi = DIV_ROUND_UP(hz, 432000000);	/* Max 450MHz */
-+	ahb = DIV_ROUND_UP(hz/axi, 204000000);	/* Max 250MHz */
-+	apb0 = 2;				/* Max 150MHz */
-+
-+	printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0);
-+
-+	/* Map divisors to register values */
-+	axi = axi - 1;
-+	if (ahb > 4)
-+		ahb = 3;
-+	else if (ahb > 2)
-+		ahb = 2;
-+	else if (ahb > 1)
-+		ahb = 1;
-+	else
-+		ahb = 0;
-+
-+	apb0 = apb0 - 1;
-+
-+	/* Switch to 24MHz clock while changing PLL1 */
-+	writel(AXI_DIV_1 << AXI_DIV_SHIFT |
-+	       AHB_DIV_2 << AHB_DIV_SHIFT |
-+	       APB0_DIV_1 << APB0_DIV_SHIFT |
-+	       CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
-+	       &ccm->cpu_ahb_apb0_cfg);
-+	sdelay(20);
-+
-+	/* Configure sys clock divisors */
-+	writel(axi << AXI_DIV_SHIFT |
-+	       ahb << AHB_DIV_SHIFT |
-+	       apb0 << APB0_DIV_SHIFT |
-+	       CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
-+	       &ccm->cpu_ahb_apb0_cfg);
-+
-+	/* Configure PLL1 at the desired frequency */
-+	writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg);
-+	sdelay(200);
-+
-+	/* Switch CPU to PLL1 */
-+	writel(axi << AXI_DIV_SHIFT |
-+	       ahb << AHB_DIV_SHIFT |
-+	       apb0 << APB0_DIV_SHIFT |
-+	       CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
-+	       &ccm->cpu_ahb_apb0_cfg);
-+	sdelay(20);
-+}
-+#endif
-+
-+unsigned int clock_get_pll6(void)
-+{
-+	struct sunxi_ccm_reg *const ccm =
-+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+	uint32_t rval = readl(&ccm->pll6_cfg);
-+	int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
-+	int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
-+	return 24000000 * n * k / 2;
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun6i.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/clock_sun6i.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/clock_sun6i.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,110 @@
-+/*
-+ * sun6i specific clock code
-+ *
-+ * (C) Copyright 2007-2012
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/clock.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/prcm.h>
-+#include <asm/arch/sys_proto.h>
-+
-+#ifdef CONFIG_SPL_BUILD
-+void clock_init_safe(void)
-+{
-+	struct sunxi_ccm_reg * const ccm =
-+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+	struct sunxi_prcm_reg * const prcm =
-+		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
-+
-+	/* Set PLL ldo voltage without this PLL6 does not work properly */
-+	writel(PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
-+		PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140) |
-+		PRCM_PLL_CTRL_LDO_KEY, &prcm->pll_ctrl1);
-+	writel(PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
-+		PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140) |
-+		PRCM_PLL_CTRL_LDO_KEY, &prcm->pll_ctrl1);
-+	writel(PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
-+		PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140),
-+		&prcm->pll_ctrl1);
-+
-+	/* AXI and PLL1 settings from boot0 / boot1, PLL1 set to 486 Mhz */
-+	writel(AXI_DIV_3 << AXI_DIV_SHIFT |
-+	       ATB_DIV_2 << ATB_DIV_SHIFT |
-+	       CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
-+	       &ccm->cpu_axi_cfg);
-+	writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg);
-+	sdelay(200);
-+	writel(AXI_DIV_3 << AXI_DIV_SHIFT |
-+	       ATB_DIV_2 << ATB_DIV_SHIFT |
-+	       CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
-+	       &ccm->cpu_axi_cfg);
-+
-+	writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
-+}
-+#endif
-+
-+void clock_init_uart(void)
-+{
-+	struct sunxi_ccm_reg *const ccm =
-+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+#if CONFIG_CONS_INDEX < 5
-+	/* uart clock source is apb2 */
-+	writel(APB2_CLK_SRC_OSC24M|
-+	       APB2_CLK_RATE_N_1|
-+	       APB2_CLK_RATE_M(1),
-+	       &ccm->apb2_div);
-+
-+	/* open the clock for uart */
-+	setbits_le32(&ccm->apb2_gate,
-+		CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1));
-+
-+	/* deassert uart reset */
-+	setbits_le32(&ccm->apb2_reset_cfg,
-+		1 << (APB2_RESET_UART_SHIFT+CONFIG_CONS_INDEX-1));
-+#else
-+	/* enable R_PIO and R_UART clocks, and de-assert resets */
-+	prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART);
-+#endif
-+
-+	/* Dup with clock_init_safe(), drop once sun6i SPL support lands */
-+	writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
-+}
-+
-+int clock_twi_onoff(int port, int state)
-+{
-+	struct sunxi_ccm_reg *const ccm =
-+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+	if (port > 3)
-+		return -1;
-+
-+	/* set the apb clock gate for twi */
-+	if (state)
-+		setbits_le32(&ccm->apb2_gate,
-+			     CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
-+	else
-+		clrbits_le32(&ccm->apb2_gate,
-+			     CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
-+
-+	return 0;
-+}
-+
-+unsigned int clock_get_pll6(void)
-+{
-+	struct sunxi_ccm_reg *const ccm =
-+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+	uint32_t rval = readl(&ccm->pll6_cfg);
-+	int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1;
-+	int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
-+	return 24000000 * n * k / 2;
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cmd_watchdog.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,29 @@
-+/*
-+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/watchdog.h>
-+
-+int do_sunxi_watchdog(cmd_tbl_t *cmdtp, int flag, int argc, const char *argv[])
-+{
-+	unsigned long interval;
-+
-+	if (argc < 2) {
-+		printf("usage: watchdog seconds\n");
-+		printf("over %d to disable watchdog\n", WDT_MAX_TIMEOUT);
-+	}
-+	interval = simple_strtoul(argv[1], NULL, 10);
-+	watchdog_set((unsigned int)interval);
-+
-+	return 0;
-+}
-+
-+U_BOOT_CMD(
-+	watchdog, 2, 1, do_sunxi_watchdog,
-+	"Set watchdog [0 - 16]. [17+} disables",
-+	""
-+);
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/config.mk u-boot-sunxi/arch/arm/cpu/armv7/sunxi/config.mk
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/config.mk	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/config.mk	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,8 @@
-+# Build a combined spl + u-boot image
-+ifdef CONFIG_SPL
-+ifndef CONFIG_SPL_BUILD
-+ifndef CONFIG_SPL_FEL
-+ALL-y += u-boot-sunxi-with-spl.bin
-+endif
-+endif
-+endif
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cpu_info.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cpu_info.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/cpu_info.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/cpu_info.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,38 @@
-+/*
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/cpu.h>
-+
-+#ifdef CONFIG_DISPLAY_CPUINFO
-+int print_cpuinfo(void)
-+{
-+#ifdef CONFIG_SUN4I
-+	puts("CPU:   Allwinner A10 (SUN4I)\n");
-+#elif defined CONFIG_SUN5I
-+	u32 val = readl(SUNXI_SID_BASE + 0x08);
-+	switch ((val >> 12) & 0xf) {
-+	case 0: puts("CPU:   Allwinner A12 (SUN5I)\n"); break;
-+	case 3: puts("CPU:   Allwinner A13 (SUN5I)\n"); break;
-+	case 7: puts("CPU:   Allwinner A10s (SUN5I)\n"); break;
-+	default: puts("CPU:   Allwinner A1X (SUN5I)\n");
-+	}
-+#elif defined CONFIG_SUN6I
-+	puts("CPU:   Allwinner A31 (SUN6I)\n");
-+#elif defined CONFIG_SUN7I
-+	puts("CPU:   Allwinner A20 (SUN7I)\n");
-+#elif defined CONFIG_SUN8I
-+	puts("CPU:   Allwinner A23 (SUN8I)\n");
-+#else
-+#warning Please update cpu_info.c with correct CPU information
-+	puts("CPU:   SUNXI Family\n");
-+#endif
-+	return 0;
-+}
-+#endif
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/dram.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/dram.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/dram.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/dram.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,693 @@
-+/*
-+ * sunxi DRAM controller initialization
-+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
-+ *
-+ * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c
-+ * and earlier U-Boot Allwiner A10 SPL work
-+ *
-+ * (C) Copyright 2007-2012
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Berg Xing <bergxing@allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+/*
-+ * Unfortunately the only documentation we have on the sun7i DRAM
-+ * controller is Allwinner boot0 + boot1 code, and that code uses
-+ * magic numbers & shifts with no explanations. Hence this code is
-+ * rather undocumented and full of magic.
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/clock.h>
-+#include <asm/arch/dram.h>
-+#include <asm/arch/timer.h>
-+#include <asm/arch/sys_proto.h>
-+
-+#define CPU_CFG_CHIP_VER(n) ((n) << 6)
-+#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3)
-+#define CPU_CFG_CHIP_REV_A 0x0
-+#define CPU_CFG_CHIP_REV_C1 0x1
-+#define CPU_CFG_CHIP_REV_C2 0x2
-+#define CPU_CFG_CHIP_REV_B 0x3
-+
-+/*
-+ * Wait up to 1s for mask to be clear in given reg.
-+ */
-+static void await_completion(u32 *reg, u32 mask)
-+{
-+	unsigned long tmo = timer_get_us() + 1000000;
-+
-+	while (readl(reg) & mask) {
-+		if (timer_get_us() > tmo)
-+			panic("Timeout initialising DRAM\n");
-+	}
-+}
-+
-+static void mctl_ddr3_reset(void)
-+{
-+	struct sunxi_dram_reg *dram =
-+			(struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+
-+#ifdef CONFIG_SUN4I
-+	struct sunxi_timer_reg *timer =
-+			(struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
-+	u32 reg_val;
-+
-+	writel(0, &timer->cpu_cfg);
-+	reg_val = readl(&timer->cpu_cfg);
-+
-+	if ((reg_val & CPU_CFG_CHIP_VER_MASK) !=
-+	    CPU_CFG_CHIP_VER(CPU_CFG_CHIP_REV_A)) {
-+		setbits_le32(&dram->mcr, DRAM_MCR_RESET);
-+		udelay(2);
-+		clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
-+	} else
-+#endif
-+	{
-+		clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
-+		udelay(2);
-+		setbits_le32(&dram->mcr, DRAM_MCR_RESET);
-+	}
-+}
-+
-+static void mctl_set_drive(void)
-+{
-+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+
-+#ifdef CONFIG_SUN7I
-+	clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28),
-+#else
-+	clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3),
-+#endif
-+			DRAM_MCR_MODE_EN(0x3) |
-+			0xffc);
-+}
-+
-+static void mctl_itm_disable(void)
-+{
-+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+
-+	clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF);
-+}
-+
-+static void mctl_itm_enable(void)
-+{
-+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+
-+	clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF);
-+}
-+
-+static void mctl_enable_dll0(u32 phase)
-+{
-+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+
-+	clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
-+			((phase >> 16) & 0x3f) << 6);
-+	clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE);
-+	udelay(2);
-+
-+	clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE);
-+	udelay(22);
-+
-+	clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET);
-+	udelay(22);
-+}
-+
-+/*
-+ * Note: This differs from pm/standby in that it checks the bus width
-+ */
-+static void mctl_enable_dllx(u32 phase)
-+{
-+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+	u32 i, n, bus_width;
-+
-+	bus_width = readl(&dram->dcr);
-+
-+	if ((bus_width & DRAM_DCR_BUS_WIDTH_MASK) ==
-+	    DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT))
-+		n = DRAM_DCR_NR_DLLCR_32BIT;
-+	else
-+		n = DRAM_DCR_NR_DLLCR_16BIT;
-+
-+	for (i = 1; i < n; i++) {
-+		clrsetbits_le32(&dram->dllcr[i], 0xf << 14,
-+				(phase & 0xf) << 14);
-+		clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET,
-+				DRAM_DLLCR_DISABLE);
-+		phase >>= 4;
-+	}
-+	udelay(2);
-+
-+	for (i = 1; i < n; i++)
-+		clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET |
-+			     DRAM_DLLCR_DISABLE);
-+	udelay(22);
-+
-+	for (i = 1; i < n; i++)
-+		clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE,
-+				DRAM_DLLCR_NRESET);
-+	udelay(22);
-+}
-+
-+static u32 hpcr_value[32] = {
-+#ifdef CONFIG_SUN5I
-+	0, 0, 0, 0,
-+	0, 0, 0, 0,
-+	0, 0, 0, 0,
-+	0, 0, 0, 0,
-+	0x1031, 0x1031, 0x0735, 0x1035,
-+	0x1035, 0x0731, 0x1031, 0,
-+	0x0301, 0x0301, 0x0301, 0x0301,
-+	0x0301, 0x0301, 0x0301, 0
-+#endif
-+#ifdef CONFIG_SUN4I
-+	0x0301, 0x0301, 0x0301, 0x0301,
-+	0x0301, 0x0301, 0, 0,
-+	0, 0, 0, 0,
-+	0, 0, 0, 0,
-+	0x1031, 0x1031, 0x0735, 0x5031,
-+	0x1035, 0x0731, 0x1031, 0x0735,
-+	0x1035, 0x1031, 0x0731, 0x1035,
-+	0x1031, 0x0301, 0x0301, 0x0731
-+#endif
-+#ifdef CONFIG_SUN7I
-+	0x0301, 0x0301, 0x0301, 0x0301,
-+	0x0301, 0x0301, 0x0301, 0x0301,
-+	0, 0, 0, 0,
-+	0, 0, 0, 0,
-+	0x1031, 0x1031, 0x0735, 0x1035,
-+	0x1035, 0x0731, 0x1031, 0x0735,
-+	0x1035, 0x1031, 0x0731, 0x1035,
-+	0x0001, 0x1031, 0, 0x1031
-+	/* last row differs from boot0 source table
-+	 * 0x1031, 0x0301, 0x0301, 0x0731
-+	 * but boot0 code skips #28 and #30, and sets #29 and #31 to the
-+	 * value from #28 entry (0x1031)
-+	 */
-+#endif
-+};
-+
-+static void mctl_configure_hostport(void)
-+{
-+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+	u32 i;
-+
-+	for (i = 0; i < 32; i++)
-+		writel(hpcr_value[i], &dram->hpcr[i]);
-+}
-+
-+static void mctl_setup_dram_clock(u32 clk)
-+{
-+	u32 reg_val;
-+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+	/* setup DRAM PLL */
-+	reg_val = readl(&ccm->pll5_cfg);
-+	reg_val &= ~CCM_PLL5_CTRL_M_MASK;		/* set M to 0 (x1) */
-+	reg_val &= ~CCM_PLL5_CTRL_K_MASK;		/* set K to 0 (x1) */
-+	reg_val &= ~CCM_PLL5_CTRL_N_MASK;		/* set N to 0 (x0) */
-+	reg_val &= ~CCM_PLL5_CTRL_P_MASK;		/* set P to 0 (x1) */
-+	if (clk >= 540 && clk < 552) {
-+		/* dram = 540MHz, pll5p = 540MHz */
-+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
-+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
-+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15));
-+		reg_val |= CCM_PLL5_CTRL_P(1);
-+	} else if (clk >= 512 && clk < 528) {
-+		/* dram = 512MHz, pll5p = 384MHz */
-+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
-+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4));
-+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16));
-+		reg_val |= CCM_PLL5_CTRL_P(2);
-+	} else if (clk >= 496 && clk < 504) {
-+		/* dram = 496MHz, pll5p = 372MHz */
-+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
-+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
-+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31));
-+		reg_val |= CCM_PLL5_CTRL_P(2);
-+	} else if (clk >= 468 && clk < 480) {
-+		/* dram = 468MHz, pll5p = 468MHz */
-+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
-+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
-+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13));
-+		reg_val |= CCM_PLL5_CTRL_P(1);
-+	} else if (clk >= 396 && clk < 408) {
-+		/* dram = 396MHz, pll5p = 396MHz */
-+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
-+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
-+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11));
-+		reg_val |= CCM_PLL5_CTRL_P(1);
-+	} else 	{
-+		/* any other frequency that is a multiple of 24 */
-+		reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
-+		reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
-+		reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24));
-+		reg_val |= CCM_PLL5_CTRL_P(CCM_PLL5_CTRL_P_X(2));
-+	}
-+	reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN;		/* PLL VCO Gain off */
-+	reg_val |= CCM_PLL5_CTRL_EN;			/* PLL On */
-+	writel(reg_val, &ccm->pll5_cfg);
-+	udelay(5500);
-+
-+	setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK);
-+
-+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)
-+	/* reset GPS */
-+	clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE);
-+	setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
-+	udelay(1);
-+	clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
-+#endif
-+
-+#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
-+	/* setup MBUS clock */
-+	reg_val = CCM_MBUS_CTRL_GATE |
-+#if defined(CONFIG_SUN7I) && defined(CONFIG_FAST_MBUS)
-+		  CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
-+		  CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
-+		  CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(3));
-+#elif defined(CONFIG_SUN7I) && !defined(CONFIG_FAST_MBUS)
-+		  CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
-+		  CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) |
-+		  CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2));
-+#else /* defined(CONFIG_SUN5I) */
-+		  CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL5) |
-+		  CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
-+		  CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2));
-+#endif
-+	writel(reg_val, &ccm->mbus_clk_cfg);
-+#endif
-+
-+	/*
-+	 * open DRAMC AHB & DLL register clock
-+	 * close it first
-+	 */
-+#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
-+	clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
-+#else
-+	clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
-+#endif
-+	udelay(22);
-+
-+	/* then open it */
-+#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
-+	setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
-+#else
-+	setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
-+#endif
-+	udelay(22);
-+}
-+
-+static int dramc_scan_readpipe(void)
-+{
-+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+	u32 reg_val;
-+
-+	/* data training trigger */
-+#ifdef CONFIG_SUN7I
-+	clrbits_le32(&dram->csr, DRAM_CSR_FAILED);
-+#endif
-+	setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING);
-+
-+	/* check whether data training process has completed */
-+	await_completion(&dram->ccr, DRAM_CCR_DATA_TRAINING);
-+
-+	/* check data training result */
-+	reg_val = readl(&dram->csr);
-+	if (reg_val & DRAM_CSR_FAILED)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static int dramc_scan_dll_para(void)
-+{
-+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+	const u32 dqs_dly[7] = {0x3, 0x2, 0x1, 0x0, 0xe, 0xd, 0xc};
-+	const u32 clk_dly[15] = {0x07, 0x06, 0x05, 0x04, 0x03,
-+				 0x02, 0x01, 0x00, 0x08, 0x10,
-+				 0x18, 0x20, 0x28, 0x30, 0x38};
-+	u32 clk_dqs_count[15];
-+	u32 dqs_i, clk_i, cr_i;
-+	u32 max_val, min_val;
-+	u32 dqs_index, clk_index;
-+
-+	/* Find DQS_DLY Pass Count for every CLK_DLY */
-+	for (clk_i = 0; clk_i < 15; clk_i++) {
-+		clk_dqs_count[clk_i] = 0;
-+		clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
-+				(clk_dly[clk_i] & 0x3f) << 6);
-+		for (dqs_i = 0; dqs_i < 7; dqs_i++) {
-+			for (cr_i = 1; cr_i < 5; cr_i++) {
-+				clrsetbits_le32(&dram->dllcr[cr_i],
-+						0x4f << 14,
-+						(dqs_dly[dqs_i] & 0x4f) << 14);
-+			}
-+			udelay(2);
-+			if (dramc_scan_readpipe() == 0)
-+				clk_dqs_count[clk_i]++;
-+		}
-+	}
-+	/* Test DQS_DLY Pass Count for every CLK_DLY from up to down */
-+	for (dqs_i = 15; dqs_i > 0; dqs_i--) {
-+		max_val = 15;
-+		min_val = 15;
-+		for (clk_i = 0; clk_i < 15; clk_i++) {
-+			if (clk_dqs_count[clk_i] == dqs_i) {
-+				max_val = clk_i;
-+				if (min_val == 15)
-+					min_val = clk_i;
-+			}
-+		}
-+		if (max_val < 15)
-+			break;
-+	}
-+
-+	/* Check if Find a CLK_DLY failed */
-+	if (!dqs_i)
-+		goto fail;
-+
-+	/* Find the middle index of CLK_DLY */
-+	clk_index = (max_val + min_val) >> 1;
-+	if ((max_val == (15 - 1)) && (min_val > 0))
-+		/* if CLK_DLY[MCTL_CLK_DLY_COUNT] is very good, then the middle
-+		 * value can be more close to the max_val
-+		 */
-+		clk_index = (15 + clk_index) >> 1;
-+	else if ((max_val < (15 - 1)) && (min_val == 0))
-+		/* if CLK_DLY[0] is very good, then the middle value can be more
-+		 * close to the min_val
-+		 */
-+		clk_index >>= 1;
-+	if (clk_dqs_count[clk_index] < dqs_i)
-+		clk_index = min_val;
-+
-+	/* Find the middle index of DQS_DLY for the CLK_DLY got above, and Scan
-+	 * read pipe again
-+	 */
-+	clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
-+			(clk_dly[clk_index] & 0x3f) << 6);
-+	max_val = 7;
-+	min_val = 7;
-+	for (dqs_i = 0; dqs_i < 7; dqs_i++) {
-+		clk_dqs_count[dqs_i] = 0;
-+		for (cr_i = 1; cr_i < 5; cr_i++) {
-+			clrsetbits_le32(&dram->dllcr[cr_i],
-+					0x4f << 14,
-+					(dqs_dly[dqs_i] & 0x4f) << 14);
-+		}
-+		udelay(2);
-+		if (dramc_scan_readpipe() == 0) {
-+			clk_dqs_count[dqs_i] = 1;
-+			max_val = dqs_i;
-+			if (min_val == 7)
-+				min_val = dqs_i;
-+		}
-+	}
-+
-+	if (max_val < 7) {
-+		dqs_index = (max_val + min_val) >> 1;
-+		if ((max_val == (7-1)) && (min_val > 0))
-+			dqs_index = (7 + dqs_index) >> 1;
-+		else if ((max_val < (7-1)) && (min_val == 0))
-+			dqs_index >>= 1;
-+		if (!clk_dqs_count[dqs_index])
-+			dqs_index = min_val;
-+		for (cr_i = 1; cr_i < 5; cr_i++) {
-+			clrsetbits_le32(&dram->dllcr[cr_i],
-+					0x4f << 14,
-+					(dqs_dly[dqs_index] & 0x4f) << 14);
-+		}
-+		udelay(2);
-+		return dramc_scan_readpipe();
-+	}
-+
-+fail:
-+	clrbits_le32(&dram->dllcr[0], 0x3f << 6);
-+	for (cr_i = 1; cr_i < 5; cr_i++)
-+		clrbits_le32(&dram->dllcr[cr_i], 0x4f << 14);
-+	udelay(2);
-+
-+	return dramc_scan_readpipe();
-+}
-+
-+static void dramc_clock_output_en(u32 on)
-+{
-+#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
-+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+
-+	if (on)
-+		setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
-+	else
-+		clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
-+#endif
-+#ifdef CONFIG_SUN4I
-+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+	if (on)
-+		setbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT);
-+	else
-+		clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT);
-+#endif
-+}
-+
-+static const u16 tRFC_table[2][6] = {
-+	/*       256Mb    512Mb    1Gb      2Gb      4Gb      8Gb      */
-+	/* DDR2  75ns     105ns    127.5ns  195ns    327.5ns  invalid  */
-+	{        77,      108,     131,     200,     336,     336 },
-+	/* DDR3  invalid  90ns     110ns    160ns    300ns    350ns    */
-+	{        93,      93,      113,     164,     308,     359 }
-+};
-+
-+static void dramc_set_autorefresh_cycle(u32 clk, u32 type, u32 density)
-+{
-+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+	u32 tRFC, tREFI;
-+
-+	tRFC = (tRFC_table[type][density] * clk + 1023) >> 10;
-+	tREFI = (7987 * clk) >> 10;	/* <= 7.8us */
-+
-+	writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr);
-+}
-+
-+unsigned long dramc_init(struct dram_para *para)
-+{
-+	struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-+	u32 reg_val;
-+	u32 density;
-+	int ret_val;
-+
-+	/* check input dram parameter structure */
-+	if (!para)
-+		return 0;
-+
-+	/* setup DRAM relative clock */
-+	mctl_setup_dram_clock(para->clock);
-+
-+#ifdef CONFIG_SUN5I
-+	/* Disable any pad power save control */
-+	writel(0, &dram->ppwrsctl);
-+#endif
-+
-+	/* reset external DRAM */
-+#ifndef CONFIG_SUN7I
-+	mctl_ddr3_reset();
-+#endif
-+	mctl_set_drive();
-+
-+	/* dram clock off */
-+	dramc_clock_output_en(0);
-+
-+#ifdef CONFIG_SUN4I
-+	/* select dram controller 1 */
-+	writel(DRAM_CSEL_MAGIC, &dram->csel);
-+#endif
-+
-+	mctl_itm_disable();
-+	mctl_enable_dll0(para->tpr3);
-+
-+	/* configure external DRAM */
-+	reg_val = 0x0;
-+	if (para->type == DRAM_MEMORY_TYPE_DDR3)
-+		reg_val |= DRAM_DCR_TYPE_DDR3;
-+	reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3);
-+
-+	if (para->density == 256)
-+		density = DRAM_DCR_CHIP_DENSITY_256M;
-+	else if (para->density == 512)
-+		density = DRAM_DCR_CHIP_DENSITY_512M;
-+	else if (para->density == 1024)
-+		density = DRAM_DCR_CHIP_DENSITY_1024M;
-+	else if (para->density == 2048)
-+		density = DRAM_DCR_CHIP_DENSITY_2048M;
-+	else if (para->density == 4096)
-+		density = DRAM_DCR_CHIP_DENSITY_4096M;
-+	else if (para->density == 8192)
-+		density = DRAM_DCR_CHIP_DENSITY_8192M;
-+	else
-+		density = DRAM_DCR_CHIP_DENSITY_256M;
-+
-+	reg_val |= DRAM_DCR_CHIP_DENSITY(density);
-+	reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1);
-+	reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
-+	reg_val |= DRAM_DCR_CMD_RANK_ALL;
-+	reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
-+	writel(reg_val, &dram->dcr);
-+
-+#ifdef CONFIG_SUN7I
-+	setbits_le32(&dram->zqcr1, (0x1 << 24) | (0x1 << 1));
-+	if (para->tpr4 & 0x2)
-+		clrsetbits_le32(&dram->zqcr1, (0x1 << 24), (0x1 << 1));
-+	dramc_clock_output_en(1);
-+#endif
-+
-+#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I))
-+	/* set odt impendance divide ratio */
-+	reg_val = ((para->zq) >> 8) & 0xfffff;
-+	reg_val |= ((para->zq) & 0xff) << 20;
-+	reg_val |= (para->zq) & 0xf0000000;
-+	writel(reg_val, &dram->zqcr0);
-+#endif
-+
-+#ifdef CONFIG_SUN7I
-+	/* Set CKE Delay to about 1ms */
-+	setbits_le32(&dram->idcr, 0x1ffff);
-+#endif
-+
-+#ifdef CONFIG_SUN7I
-+	if ((readl(&dram->ppwrsctl) & 0x1) != 0x1)
-+		mctl_ddr3_reset();
-+	else
-+		setbits_le32(&dram->mcr, DRAM_MCR_RESET);
-+#else
-+	/* dram clock on */
-+	dramc_clock_output_en(1);
-+#endif
-+
-+	udelay(1);
-+
-+	await_completion(&dram->ccr, DRAM_CCR_INIT);
-+
-+	mctl_enable_dllx(para->tpr3);
-+
-+#ifdef CONFIG_SUN4I
-+	/* set odt impedance divide ratio */
-+	reg_val = ((para->zq) >> 8) & 0xfffff;
-+	reg_val |= ((para->zq) & 0xff) << 20;
-+	reg_val |= (para->zq) & 0xf0000000;
-+	writel(reg_val, &dram->zqcr0);
-+#endif
-+
-+#ifdef CONFIG_SUN4I
-+	/* set I/O configure register */
-+	reg_val = 0x00cc0000;
-+	reg_val |= (para->odt_en) & 0x3;
-+	reg_val |= ((para->odt_en) & 0x3) << 30;
-+	writel(reg_val, &dram->iocr);
-+#endif
-+
-+	/* set refresh period */
-+	dramc_set_autorefresh_cycle(para->clock, para->type - 2, density);
-+
-+	/* set timing parameters */
-+	writel(para->tpr0, &dram->tpr0);
-+	writel(para->tpr1, &dram->tpr1);
-+	writel(para->tpr2, &dram->tpr2);
-+
-+	if (para->type == DRAM_MEMORY_TYPE_DDR3) {
-+		reg_val = DRAM_MR_BURST_LENGTH(0x0);
-+#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I))
-+		reg_val |= DRAM_MR_POWER_DOWN;
-+#endif
-+		reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
-+		reg_val |= DRAM_MR_WRITE_RECOVERY(0x5);
-+	} else if (para->type == DRAM_MEMORY_TYPE_DDR2) {
-+		reg_val = DRAM_MR_BURST_LENGTH(0x2);
-+		reg_val |= DRAM_MR_CAS_LAT(para->cas);
-+		reg_val |= DRAM_MR_WRITE_RECOVERY(0x5);
-+	}
-+	writel(reg_val, &dram->mr);
-+
-+	writel(para->emr1, &dram->emr);
-+	writel(para->emr2, &dram->emr2);
-+	writel(para->emr3, &dram->emr3);
-+
-+	/* set DQS window mode */
-+	clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
-+
-+#ifdef CONFIG_SUN7I
-+	/* Command rate timing mode 2T & 1T */
-+	if (para->tpr4 & 0x1)
-+		setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T);
-+#endif
-+	/* reset external DRAM */
-+	setbits_le32(&dram->ccr, DRAM_CCR_INIT);
-+	await_completion(&dram->ccr, DRAM_CCR_INIT);
-+
-+#ifdef CONFIG_SUN7I
-+	/* setup zq calibration manual */
-+	reg_val = readl(&dram->ppwrsctl);
-+	if ((reg_val & 0x1) == 1) {
-+		/* super_standby_flag = 1 */
-+
-+		reg_val = readl(0x01c20c00 + 0x120); /* rtc */
-+		reg_val &= 0x000fffff;
-+		reg_val |= 0x17b00000;
-+		writel(reg_val, &dram->zqcr0);
-+
-+		/* exit self-refresh state */
-+		clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27);
-+		/* check whether command has been executed */
-+		await_completion(&dram->dcr, 0x1 << 31);
-+
-+		udelay(2);
-+
-+		/* dram pad hold off */
-+		setbits_le32(&dram->ppwrsctl, 0x16510000);
-+
-+		await_completion(&dram->ppwrsctl, 0x1);
-+
-+		/* exit self-refresh state */
-+		clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27);
-+
-+		/* check whether command has been executed */
-+		await_completion(&dram->dcr, 0x1 << 31);
-+
-+		udelay(2);
-+
-+		/* issue a refresh command */
-+		clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x13 << 27);
-+		await_completion(&dram->dcr, 0x1 << 31);
-+
-+		udelay(2);
-+	}
-+#endif
-+
-+	/* scan read pipe value */
-+	mctl_itm_enable();
-+	if (para->tpr3 & (0x1 << 31)) {
-+		ret_val = dramc_scan_dll_para();
-+		if (ret_val == 0)
-+			para->tpr3 =
-+				(((readl(&dram->dllcr[0]) >> 6) & 0x3f) << 16) |
-+				(((readl(&dram->dllcr[1]) >> 14) & 0xf) << 0) |
-+				(((readl(&dram->dllcr[2]) >> 14) & 0xf) << 4) |
-+				(((readl(&dram->dllcr[3]) >> 14) & 0xf) << 8) |
-+				(((readl(&dram->dllcr[4]) >> 14) & 0xf) << 12
-+				);
-+	} else {
-+		ret_val = dramc_scan_readpipe();
-+	}
-+
-+	if (ret_val < 0)
-+		return 0;
-+
-+	/* configure all host port */
-+	mctl_configure_hostport();
-+
-+	return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/early_print.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/early_print.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/early_print.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/early_print.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,55 @@
-+/*
-+ * (C) Copyright 2007-2012
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * Early uart print for debugging.
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/early_print.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/sys_proto.h>
-+
-+static int uart_initialized = 0;
-+
-+#if CONFIG_CONS_INDEX < 5
-+#define UART	CONFIG_CONS_INDEX-1
-+#else
-+/* SUNXI_R_UART_BASE */
-+#define UART	2922
-+#endif
-+
-+void uart_init(void) {
-+
-+	/* select dll dlh */
-+	writel(UART_LCR_DLAB, UART_LCR(UART));
-+	/* set baudrate */
-+	writel(0, UART_DLH(UART));
-+	writel(BAUD_115200, UART_DLL(UART));
-+	/* set line control */
-+	writel(LC_8_N_1, UART_LCR(UART));
-+
-+	uart_initialized = 1;
-+}
-+
-+#define TX_READY (readl(UART_LSR(UART)) & UART_LSR_TEMT)
-+
-+void uart_putc(char c) {
-+
-+	while (!TX_READY)
-+		;
-+	writel(c, UART_THR(UART));
-+}
-+
-+void uart_puts(const char *s) {
-+
-+	while (*s)
-+		uart_putc(*s++);
-+}
-+
-+
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/Makefile u-boot-sunxi/arch/arm/cpu/armv7/sunxi/Makefile
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/Makefile	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,44 @@
-+#
-+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
-+#
-+# Based on some other Makefile
-+# (C) Copyright 2000-2003
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# SPDX-License-Identifier:	GPL-2.0+
-+#
-+obj-y	+= timer.o
-+obj-y	+= board.o
-+obj-y	+= clock.o
-+obj-y	+= pinmux.o
-+obj-y	+= watchdog.o
-+obj-$(CONFIG_SUN6I)	+= prcm.o
-+obj-$(CONFIG_SUN8I)	+= prcm.o
-+obj-$(CONFIG_SUN6I)	+= p2wi.o
-+obj-$(CONFIG_SUN4I)	+= clock_sun4i.o
-+obj-$(CONFIG_SUN5I)	+= clock_sun4i.o
-+obj-$(CONFIG_SUN6I)	+= clock_sun6i.o
-+obj-$(CONFIG_SUN7I)	+= clock_sun4i.o
-+obj-$(CONFIG_SUN8I)	+= clock_sun6i.o
-+ifdef DEBUG
-+obj-y	+= early_print.o
-+endif
-+obj-$(CONFIG_BOARD_POSTCLK_INIT)	+= postclk_init.o
-+obj-$(CONFIG_SYS_SECONDARY_ON)	+= secondary_init.o
-+obj-$(CONFIG_SYS_SECONDARY_ON)	+= smp.o
-+
-+ifndef CONFIG_SPL_BUILD
-+obj-y	+= cpu_info.o
-+ifdef CONFIG_CMD_WATCHDOG
-+obj-$(CONFIG_CMD_WATCHDOG)	+= cmd_watchdog.o
-+endif
-+endif
-+
-+ifdef CONFIG_SPL_BUILD
-+obj-$(CONFIG_SUN4I)	+= dram.o
-+obj-$(CONFIG_SUN5I)	+= dram.o
-+obj-$(CONFIG_SUN7I)	+= dram.o
-+ifdef CONFIG_SPL_FEL
-+obj-y	+= start.o
-+endif
-+endif
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/p2wi.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/p2wi.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/p2wi.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/p2wi.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,120 @@
-+/*
-+ * Sunxi A31 Power Management Unit
-+ *
-+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
-+ * http://linux-sunxi.org
-+ *
-+ * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work
-+ *
-+ * (C) Copyright 2006-2013
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Berg Xing <bergxing@allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <errno.h>
-+#include <asm/io.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/p2wi.h>
-+#include <asm/arch/prcm.h>
-+#include <asm/arch/clock.h>
-+#include <asm/arch/sys_proto.h>
-+
-+void p2wi_init(void)
-+{
-+	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
-+
-+	/* Enable p2wi and PIO clk, and de-assert their resets */
-+	prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI);
-+
-+	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUNXI_GPL0_R_P2WI_SCK);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUNXI_GPL1_R_P2WI_SDA);
-+
-+	/* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */
-+	writel(P2WI_CTRL_RESET, &p2wi->ctrl);
-+	sdelay(0x100);
-+	writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8),
-+	       &p2wi->cc);
-+}
-+
-+int p2wi_set_pmu_address(u8 slave_addr, u8 ctrl_reg, u8 init_data)
-+{
-+	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
-+	int i;
-+
-+	writel(P2WI_PM_DEV_ADDR(slave_addr) |
-+	       P2WI_PM_CTRL_ADDR(ctrl_reg) |
-+	       P2WI_PM_INIT_DATA(init_data) |
-+	       P2WI_PM_INIT_SEND,
-+	       &p2wi->pm);
-+	for (i = 0xffffff; i != 0; i--)
-+		if (!(readl(&p2wi->pm) & P2WI_PM_INIT_SEND))
-+			break;
-+	if (readl(&p2wi->pm) & P2WI_PM_INIT_SEND)
-+		return -EFAULT;
-+
-+	return 0;
-+}
-+
-+int p2wi_read(const u8 addr, u8 *data)
-+{
-+	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
-+	int i, ret = 0;
-+	u8 reg;
-+
-+	writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
-+	writel(P2WI_DATA_NUM_BYTES(1) |
-+	       P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes);
-+	writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
-+	writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
-+
-+	for (i = 0xffffff; i != 0; i--) {
-+	        reg = readl(&p2wi->status);
-+	        if (reg & P2WI_STAT_TRANS_ERR) {
-+	                ret = -EIO;
-+	                break;
-+                }
-+		if (reg & P2WI_STAT_TRANS_DONE)
-+			break;
-+        }
-+
-+	if (i == 0)
-+		ret = -ETIME;
-+
-+	*data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK;
-+	writel(reg, &p2wi->status); /* Clear status bits */
-+	return ret;
-+}
-+
-+int p2wi_write(const u8 addr, u8 data)
-+{
-+	struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
-+	int i, ret = 0;
-+	u8 reg;
-+
-+	writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
-+	writel(P2WI_DATA_BYTE_1(data), &p2wi->data0);
-+	writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes);
-+	writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
-+	writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
-+
-+	for (i = 0xffffff; i != 0; i--) {
-+	        reg = readl(&p2wi->status);
-+	        if (reg & P2WI_STAT_TRANS_ERR) {
-+	                ret = -EIO;
-+	                break;
-+                }
-+		if (reg & P2WI_STAT_TRANS_DONE)
-+			break;
-+        }
-+
-+	if (i == 0)
-+		ret = -ETIME;
-+
-+	writel(reg, &p2wi->status); /* Clear status bits */
-+	return ret;
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/pinmux.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/pinmux.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/pinmux.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/pinmux.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,61 @@
-+/*
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/gpio.h>
-+
-+int sunxi_gpio_set_cfgpin(u32 pin, u32 val)
-+{
-+	u32 bank = GPIO_BANK(pin);
-+	u32 index = GPIO_CFG_INDEX(pin);
-+	u32 offset = GPIO_CFG_OFFSET(pin);
-+	struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
-+
-+	clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset);
-+
-+	return 0;
-+}
-+
-+int sunxi_gpio_get_cfgpin(u32 pin)
-+{
-+	u32 cfg;
-+	u32 bank = GPIO_BANK(pin);
-+	u32 index = GPIO_CFG_INDEX(pin);
-+	u32 offset = GPIO_CFG_OFFSET(pin);
-+	struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
-+
-+	cfg = readl(&pio->cfg[0] + index);
-+	cfg >>= offset;
-+
-+	return cfg & 0xf;
-+}
-+
-+int sunxi_gpio_set_drv(u32 pin, u32 val)
-+{
-+	u32 bank = GPIO_BANK(pin);
-+	u32 index = GPIO_DRV_INDEX(pin);
-+	u32 offset = GPIO_DRV_OFFSET(pin);
-+	struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
-+
-+	clrsetbits_le32(&pio->drv[0] + index, 0x3 << offset, val << offset);
-+
-+	return 0;
-+}
-+
-+int sunxi_gpio_set_pull(u32 pin, u32 val)
-+{
-+	u32 bank = GPIO_BANK(pin);
-+	u32 index = GPIO_PULL_INDEX(pin);
-+	u32 offset = GPIO_PULL_OFFSET(pin);
-+	struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
-+
-+	clrsetbits_le32(&pio->pull[0] + index, 0x3 << offset, val << offset);
-+
-+	return 0;
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/postclk_init.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/postclk_init.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/postclk_init.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/postclk_init.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,20 @@
-+/*
-+ * (C) Copyright 2013
-+ * Carl van Schaik <carl@ok-labs.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#if defined(CONFIG_SYS_SECONDARY_ON)
-+#include <asm/arch/smp.h>
-+#endif
-+
-+
-+int board_postclk_init(void)
-+{
-+#if defined(CONFIG_SYS_SECONDARY_ON)
-+	startup_secondaries();
-+#endif
-+	return 0;
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/prcm.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/prcm.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/prcm.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/prcm.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,35 @@
-+/*
-+ * Sunxi A31 Power Management Unit
-+ *
-+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
-+ * http://linux-sunxi.org
-+ *
-+ * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work
-+ *
-+ * (C) Copyright 2006-2013
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Berg Xing <bergxing@allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <errno.h>
-+#include <asm/io.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/prcm.h>
-+#include <asm/arch/sys_proto.h>
-+
-+/* APB0 clock gate and reset bit offsets are the same. */
-+void prcm_apb0_enable(u32 flags)
-+{
-+	struct sunxi_prcm_reg *prcm =
-+		(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
-+
-+	/* open the clock for module */
-+	setbits_le32(&prcm->apb0_gate, flags);
-+
-+	/* deassert reset for module */
-+	setbits_le32(&prcm->apb0_reset, flags);
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/secondary_init.S u-boot-sunxi/arch/arm/cpu/armv7/sunxi/secondary_init.S
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/secondary_init.S	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/secondary_init.S	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,31 @@
-+/*
-+ * A lowlevel_init function that sets up the stack to call a C function to
-+ * perform further init.
-+ *
-+ * (C) Copyright 2013
-+ * Carl van Schaik <carl@ok-labs.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+#include <asm-offsets.h>
-+#include <config.h>
-+#include <linux/linkage.h>
-+
-+ENTRY(secondary_init)
-+	/* Get cpu number : r5 */
-+	mrc	p15, 0, r5, c0, c0, 5
-+	and	r5, r5, #0xff
-+
-+	/*
-+	 * Setup a secondary stack, each core gets 128 bytes.
-+	 */
-+	ldr	sp, =secondary_stack
-+	mov	r0, #0x80
-+	add	sp, sp, r0, lsl r5
-+
-+	/*
-+	 * Jump to C
-+	 */
-+	bl	secondary_start
-+ENDPROC(secondary_init)
-+
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/smp.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/smp.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/smp.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/smp.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,80 @@
-+/*
-+ * (C) Copyright 2013
-+ * Carl van Schaik <carl@ok-labs.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/smp.h>
-+#include <asm/arch/cpucfg.h>
-+
-+/* Right now we assume only a single secondary as in sun7i */
-+#if defined(CONFIG_SUN7I)
-+#define NUM_CORES 2
-+#else
-+#error unsupported SoC
-+#endif
-+
-+static void secondary_pen(void)
-+{
-+	struct sunxi_cpucfg *cpucfg = (struct sunxi_cpucfg *)SUNXI_CPUCFG_BASE;
-+
-+	while (1) {
-+		__asm__ __volatile__("wfe" ::: "memory");
-+
-+		unsigned long boot_addr = readl(&cpucfg->boot_addr);
-+
-+		__asm__ __volatile__(
-+			"mov	r14, %0	\n"
-+			"bx	r14	\n"
-+			: : "r" (boot_addr)
-+		);
-+	};
-+}
-+
-+u32 secondary_stack[32*(NUM_CORES-1)];
-+
-+void secondary_start(void)
-+{
-+	secondary_pen();
-+}
-+
-+/* Power on secondaries */
-+void startup_secondaries(void)
-+{
-+	int i;
-+	struct sunxi_cpucfg *cpucfg = (struct sunxi_cpucfg *)SUNXI_CPUCFG_BASE;
-+
-+	writel((u32)secondary_init, &cpucfg->boot_addr);
-+
-+	for (i = 1; i < NUM_CORES; i++) {
-+		/* Assert CPU reset just in case */
-+		writel(CPU_RESET_SET, &cpucfg->cpu[i].reset_ctrl);
-+		/* Ensure CPU reset also invalidates L1 caches */
-+		clrbits_le32(&cpucfg->general_ctrl,
-+				GENERAL_CTRL_NO_L1_RESET_CPU(i));
-+		/* Lock CPU */
-+		clrbits_le32(&cpucfg->debug1_ctrl, 1 << i);
-+
-+		/* Ramp up power to CPU1 */
-+		assert(i == 1);
-+		u32 j = 0xff << 1;
-+		do {
-+			j = j >> 1;
-+			writel(j, &cpucfg->cpu1_power_clamp);
-+		} while (j != 0);
-+
-+		udelay(10*1000); /* 10ms */
-+
-+		clrbits_le32(&cpucfg->cpu1_power_off, 1);
-+		/* Release CPU reset */
-+		writel(CPU_RESET_CLEAR, &cpucfg->cpu[i].reset_ctrl);
-+
-+		/* Unlock CPU */
-+		setbits_le32(&cpucfg->debug1_ctrl, 1 << i);
-+
-+		printf("Secondary CPU%d power-on\n", i);
-+	}
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/start.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/start.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/start.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/start.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1 @@
-+/* Intentionally empty. Only needed to get FEL SPL link line right */
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/timer.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/timer.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/timer.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/timer.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,113 @@
-+/*
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/timer.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#define TIMER_MODE   (0x0 << 7)	/* continuous mode */
-+#define TIMER_DIV    (0x0 << 4)	/* pre scale 1 */
-+#define TIMER_SRC    (0x1 << 2)	/* osc24m */
-+#define TIMER_RELOAD (0x1 << 1)	/* reload internal value */
-+#define TIMER_EN     (0x1 << 0)	/* enable timer */
-+
-+#define TIMER_CLOCK		(24 * 1000 * 1000)
-+#define COUNT_TO_USEC(x)	((x) / 24)
-+#define USEC_TO_COUNT(x)	((x) * 24)
-+#define TICKS_PER_HZ		(TIMER_CLOCK / CONFIG_SYS_HZ)
-+#define TICKS_TO_HZ(x)		((x) / TICKS_PER_HZ)
-+
-+#define TIMER_LOAD_VAL		0xffffffff
-+
-+#define TIMER_NUM		0	/* we use timer 0 */
-+
-+/* read the 32-bit timer */
-+static ulong read_timer(void)
-+{
-+	struct sunxi_timer_reg *timers =
-+		(struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
-+	struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
-+
-+	/*
-+	 * The hardware timer counts down, therefore we invert to
-+	 * produce an incrementing timer.
-+	 */
-+	return ~readl(&timer->val);
-+}
-+
-+/* init timer register */
-+int timer_init(void)
-+{
-+	struct sunxi_timer_reg *timers =
-+		(struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
-+	struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
-+	writel(TIMER_LOAD_VAL, &timer->inter);
-+	writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN,
-+	       &timer->ctl);
-+
-+	return 0;
-+}
-+
-+/* timer without interrupts */
-+ulong get_timer(ulong base)
-+{
-+	return get_timer_masked() - base;
-+}
-+
-+ulong get_timer_masked(void)
-+{
-+	/* current tick value */
-+	ulong now = TICKS_TO_HZ(read_timer());
-+
-+	if (now >= gd->arch.lastinc)	/* normal (non rollover) */
-+		gd->arch.tbl += (now - gd->arch.lastinc);
-+	else {
-+		/* rollover */
-+		gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL)
-+				- gd->arch.lastinc) + now;
-+	}
-+	gd->arch.lastinc = now;
-+
-+	return gd->arch.tbl;
-+}
-+
-+/* delay x useconds */
-+void __udelay(unsigned long usec)
-+{
-+	long tmo = USEC_TO_COUNT(usec);
-+	ulong now, last = read_timer();
-+
-+	while (tmo > 0) {
-+		now = read_timer();
-+		if (now > last)	/* normal (non rollover) */
-+			tmo -= now - last;
-+		else		/* rollover */
-+			tmo -= TIMER_LOAD_VAL - last + now;
-+		last = now;
-+	}
-+}
-+
-+/*
-+ * This function is derived from PowerPC code (read timebase as long long).
-+ * On ARM it just returns the timer value.
-+ */
-+unsigned long long get_ticks(void)
-+{
-+	return get_timer(0);
-+}
-+
-+/*
-+ * This function is derived from PowerPC code (timebase clock frequency).
-+ * On ARM it returns the number of timer ticks per second.
-+ */
-+ulong get_tbclk(void)
-+{
-+	return CONFIG_SYS_HZ;
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,77 @@
-+/*
-+ * (C) Copyright 2013
-+ * Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(s_init)
-+SECTIONS
-+{
-+	. = 0x00002000;
-+
-+	. = ALIGN(4);
-+	.text :
-+	{
-+		*(.text.s_init)
-+		*(.text*)
-+	}
-+
-+	. = ALIGN(4);
-+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-+
-+	. = ALIGN(4);
-+	.data : {
-+		*(.data*)
-+	}
-+
-+	. = ALIGN(4);
-+	. = .;
-+
-+	. = ALIGN(4);
-+	.rel.dyn : {
-+		__rel_dyn_start = .;
-+		*(.rel*)
-+		__rel_dyn_end = .;
-+	}
-+
-+	.dynsym : {
-+		__dynsym_start = .;
-+		*(.dynsym)
-+	}
-+
-+	. = ALIGN(4);
-+	.note.gnu.build-id :
-+	{
-+		*(.note.gnu.build-id)
-+	}
-+	_end = .;
-+
-+	. = ALIGN(4096);
-+	.mmutable : {
-+		*(.mmutable)
-+	}
-+
-+	.bss_start __rel_dyn_start (OVERLAY) : {
-+		KEEP(*(.__bss_start));
-+		__bss_base = .;
-+	}
-+
-+	.bss __bss_base (OVERLAY) : {
-+		*(.bss*)
-+		. = ALIGN(4);
-+		__bss_limit = .;
-+	}
-+
-+	.bss_end __bss_limit (OVERLAY) : {
-+		KEEP(*(.__bss_end));
-+	}
-+
-+	/DISCARD/ : { *(.dynstr*) }
-+	/DISCARD/ : { *(.dynamic*) }
-+	/DISCARD/ : { *(.plt*) }
-+	/DISCARD/ : { *(.interp*) }
-+	/DISCARD/ : { *(.gnu*) }
-+	/DISCARD/ : { *(.note*) }
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,52 @@
-+/*
-+ * (C) Copyright 2012
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * Based on omap-common/u-boot-spl.lds:
-+ *
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-+ *
-+ * (C) Copyright 2010
-+ * Texas Instruments, <www.ti.com>
-+ *	Aneesh V <aneesh@ti.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
-+		LENGTH = CONFIG_SPL_MAX_SIZE }
-+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
-+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+	.text      :
-+	{
-+		__start = .;
-+		arch/arm/cpu/armv7/start.o	(.text)
-+		*(.text*)
-+	} > .sram
-+
-+	. = ALIGN(4);
-+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
-+
-+	. = ALIGN(4);
-+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
-+
-+	. = ALIGN(4);
-+	__image_copy_end = .;
-+	_end = .;
-+
-+	.bss :
-+	{
-+		. = ALIGN(4);
-+		__bss_start = .;
-+		*(.bss*)
-+		. = ALIGN(4);
-+		__bss_end = .;
-+	} > .sdram
-+}
-diff -ruN u-boot-2014.04/arch/arm/cpu/armv7/sunxi/watchdog.c u-boot-sunxi/arch/arm/cpu/armv7/sunxi/watchdog.c
---- u-boot-2014.04/arch/arm/cpu/armv7/sunxi/watchdog.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/cpu/armv7/sunxi/watchdog.c	2014-09-06 16:58:35.317953141 +0200
-@@ -0,0 +1,83 @@
-+/*
-+ * Watchdog driver for the Allwinner sunxi platform.
-+ * Copyright (C) 2013  Oliver Schinagl <oliver@schinagl.nl>
-+ * http://www.linux-sunxi.org/
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <asm/io.h>
-+#include <asm/arch/timer.h>
-+#include <asm/arch/watchdog.h>
-+#include <common.h>
-+#include <watchdog.h>
-+
-+
-+#define WDT_CTRL_RESTART	(0x1 << 0)
-+#define WDT_CTRL_KEY		(0x0a57 << 1)
-+
-+#define WDT_MODE_EN		(0x1 << 0)
-+#define WDT_MODE_RESET_EN	(0x1 << 1)
-+#define WDT_MAX_TIMEOUT		16
-+#define WDT_MODE_TIMEOUT(n) \
-+	 (wdt_timeout_map[(n) < WDT_MAX_TIMEOUT ? (n) : WDT_MAX_TIMEOUT] << 3)
-+
-+
-+/*
-+ * Watchdog timeout table. The sunxi cores only use 4 bits for the watchdog as
-+ * set by the table below. The gaps are filled by rounding up to the next
-+ * second up.
-+ */
-+const unsigned int wdt_timeout_map[] = {
-+	[0] = 0b0000,  /* 0.5s*/
-+	[1] = 0b0001,  /* 1s  */
-+	[2] = 0b0010,  /* 2s  */
-+	[3] = 0b0011,  /* 3s  */
-+	[4] = 0b0100,  /* 4s  */
-+	[5] = 0b0101,  /* 5s  */
-+	[6] = 0b0110,  /* 6s  */
-+	[7] = 0b0111,  /* 8s  */
-+	[8] = 0b0111,  /* 8s  */
-+	[9] = 0b1000, /* 10s */
-+	[10] = 0b1000, /* 10s */
-+	[11] = 0b1001, /* 12s */
-+	[12] = 0b1001, /* 12s */
-+	[13] = 0b1010, /* 14s */
-+	[14] = 0b1010, /* 14s */
-+	[15] = 0b1011, /* 16s */
-+	[16] = 0b1011, /* 16s */
-+};
-+
-+
-+void watchdog_reset(void)
-+{
-+	static const struct sunxi_wdog *wdog =
-+		&((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-+
-+	writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
-+}
-+
-+void watchdog_set(int timeout)
-+{
-+	static struct sunxi_wdog *const wdog =
-+		&((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-+
-+	/* Set timeout, reset & enable */
-+	if (timeout >= 0) {
-+		writel(WDT_MODE_TIMEOUT(timeout) |
-+				WDT_MODE_RESET_EN | WDT_MODE_EN,
-+		       &wdog->mode);
-+	} else {
-+		writel(0, &wdog->mode);
-+	}
-+	watchdog_reset();
-+}
-+
-+void watchdog_init(void)
-+{
-+#ifdef CONFIG_WATCHDOG
-+	watchdog_set(WDT_MAX_TIMEOUT);
-+#else
-+	watchdog_set(WDT_OFF); /* no timeout */
-+#endif
-+}
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_CLOCK_H
-+#define _SUNXI_CLOCK_H
-+
-+#include <linux/types.h>
-+
-+#define CLK_GATE_OPEN			0x1
-+#define CLK_GATE_CLOSE			0x0
-+
-+/* clock control module regs definition */
-+#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
-+#include <asm/arch/clock_sun6i.h>
-+#else
-+#include <asm/arch/clock_sun4i.h>
-+#endif
-+
-+#ifndef __ASSEMBLY__
-+int clock_init(void);
-+int clock_twi_onoff(int port, int state);
-+void clock_set_pll1(unsigned int hz);
-+unsigned int clock_get_pll6(void);
-+void clock_init_safe(void);
-+void clock_init_uart(void);
-+#endif
-+
-+#endif /* _SUNXI_CLOCK_H */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun4i.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun4i.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun4i.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,256 @@
-+/*
-+ * sun4i, sun5i and sun7i clock register definitions
-+ *
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_CLOCK_SUN4I_H
-+#define _SUNXI_CLOCK_SUN4I_H
-+
-+struct sunxi_ccm_reg {
-+	u32 pll1_cfg;		/* 0x00 pll1 control */
-+	u32 pll1_tun;		/* 0x04 pll1 tuning */
-+	u32 pll2_cfg;		/* 0x08 pll2 control */
-+	u32 pll2_tun;		/* 0x0c pll2 tuning */
-+	u32 pll3_cfg;		/* 0x10 pll3 control */
-+	u8 res0[0x4];
-+	u32 pll4_cfg;		/* 0x18 pll4 control */
-+	u8 res1[0x4];
-+	u32 pll5_cfg;		/* 0x20 pll5 control */
-+	u32 pll5_tun;		/* 0x24 pll5 tuning */
-+	u32 pll6_cfg;		/* 0x28 pll6 control */
-+	u32 pll6_tun;		/* 0x2c pll6 tuning */
-+	u32 pll7_cfg;		/* 0x30 pll7 control */
-+	u32 pll1_tun2;		/* 0x34 pll5 tuning2 */
-+	u8 res2[0x4];
-+	u32 pll5_tun2;		/* 0x3c pll5 tuning2 */
-+	u8 res3[0xc];
-+	u32 pll_lock_dbg;	/* 0x4c pll lock time debug */
-+	u32 osc24m_cfg;		/* 0x50 osc24m control */
-+	u32 cpu_ahb_apb0_cfg;	/* 0x54 cpu,ahb and apb0 divide ratio */
-+	u32 apb1_clk_div_cfg;	/* 0x58 apb1 clock dividor */
-+	u32 axi_gate;		/* 0x5c axi module clock gating */
-+	u32 ahb_gate0;		/* 0x60 ahb module clock gating 0 */
-+	u32 ahb_gate1;		/* 0x64 ahb module clock gating 1 */
-+	u32 apb0_gate;		/* 0x68 apb0 module clock gating */
-+	u32 apb1_gate;		/* 0x6c apb1 module clock gating */
-+	u8 res4[0x10];
-+	u32 nand_sclk_cfg;	/* 0x80 nand sub clock control */
-+	u32 ms_sclk_cfg;	/* 0x84 memory stick sub clock control */
-+	u32 sd0_clk_cfg;	/* 0x88 sd0 clock control */
-+	u32 sd1_clk_cfg;	/* 0x8c sd1 clock control */
-+	u32 sd2_clk_cfg;	/* 0x90 sd2 clock control */
-+	u32 sd3_clk_cfg;	/* 0x94 sd3 clock control */
-+	u32 ts_clk_cfg;		/* 0x98 transport stream clock control */
-+	u32 ss_clk_cfg;		/* 0x9c */
-+	u32 spi0_clk_cfg;	/* 0xa0 */
-+	u32 spi1_clk_cfg;	/* 0xa4 */
-+	u32 spi2_clk_cfg;	/* 0xa8 */
-+	u32 pata_clk_cfg;	/* 0xac */
-+	u32 ir0_clk_cfg;	/* 0xb0 */
-+	u32 ir1_clk_cfg;	/* 0xb4 */
-+	u32 iis_clk_cfg;	/* 0xb8 */
-+	u32 ac97_clk_cfg;	/* 0xbc */
-+	u32 spdif_clk_cfg;	/* 0xc0 */
-+	u32 keypad_clk_cfg;	/* 0xc4 */
-+	u32 sata_clk_cfg;	/* 0xc8 */
-+	u32 usb_clk_cfg;	/* 0xcc */
-+	u32 gps_clk_cfg;	/* 0xd0 */
-+	u32 spi3_clk_cfg;	/* 0xd4 */
-+	u8 res5[0x28];
-+	u32 dram_clk_cfg;	/* 0x100 */
-+	u32 be0_clk_cfg;	/* 0x104 */
-+	u32 be1_clk_cfg;	/* 0x108 */
-+	u32 fe0_clk_cfg;	/* 0x10c */
-+	u32 fe1_clk_cfg;	/* 0x110 */
-+	u32 mp_clk_cfg;		/* 0x114 */
-+	u32 lcd0_ch0_clk_cfg;	/* 0x118 */
-+	u32 lcd1_ch0_clk_cfg;	/* 0x11c */
-+	u32 csi_isp_clk_cfg;	/* 0x120 */
-+	u8 res6[0x4];
-+	u32 tvd_clk_reg;	/* 0x128 */
-+	u32 lcd0_ch1_clk_cfg;	/* 0x12c */
-+	u32 lcd1_ch1_clk_cfg;	/* 0x130 */
-+	u32 csi0_clk_cfg;	/* 0x134 */
-+	u32 csi1_clk_cfg;	/* 0x138 */
-+	u32 ve_clk_cfg;		/* 0x13c */
-+	u32 audio_codec_clk_cfg;	/* 0x140 */
-+	u32 avs_clk_cfg;	/* 0x144 */
-+	u32 ace_clk_cfg;	/* 0x148 */
-+	u32 lvds_clk_cfg;	/* 0x14c */
-+	u32 hdmi_clk_cfg;	/* 0x150 */
-+	u32 mali_clk_cfg;	/* 0x154 */
-+	u8 res7[0x4];
-+	u32 mbus_clk_cfg;	/* 0x15c */
-+	u8 res8[0x4];
-+	u32 gmac_clk_cfg;	/* 0x164 */
-+};
-+
-+/* apb1 bit field */
-+#define APB1_CLK_SRC_OSC24M		(0x0 << 24)
-+#define APB1_CLK_SRC_PLL6		(0x1 << 24)
-+#define APB1_CLK_SRC_LOSC		(0x2 << 24)
-+#define APB1_CLK_SRC_MASK		(0x3 << 24)
-+#define APB1_CLK_RATE_N_1		(0x0 << 16)
-+#define APB1_CLK_RATE_N_2		(0x1 << 16)
-+#define APB1_CLK_RATE_N_4		(0x2 << 16)
-+#define APB1_CLK_RATE_N_8		(0x3 << 16)
-+#define APB1_CLK_RATE_N_MASK		(3 << 16)
-+#define APB1_CLK_RATE_M(m)		(((m)-1) << 0)
-+#define APB1_CLK_RATE_M_MASK            (0x1f << 0)
-+
-+/* apb1 gate field */
-+#define APB1_GATE_UART_SHIFT	(16)
-+#define APB1_GATE_UART_MASK		(0xff << APB1_GATE_UART_SHIFT)
-+#define APB1_GATE_TWI_SHIFT	(0)
-+#define APB1_GATE_TWI_MASK		(0xf << APB1_GATE_TWI_SHIFT)
-+
-+/* clock divide */
-+#define AXI_DIV_SHIFT		(0)
-+#define AXI_DIV_1			0
-+#define AXI_DIV_2			1
-+#define AXI_DIV_3			2
-+#define AXI_DIV_4			3
-+#define AHB_DIV_SHIFT		(4)
-+#define AHB_DIV_1			0
-+#define AHB_DIV_2			1
-+#define AHB_DIV_4			2
-+#define AHB_DIV_8			3
-+#define APB0_DIV_SHIFT		(8)
-+#define APB0_DIV_1			0
-+#define APB0_DIV_2			1
-+#define APB0_DIV_4			2
-+#define APB0_DIV_8			3
-+#define CPU_CLK_SRC_SHIFT	(16)
-+#define CPU_CLK_SRC_OSC24M		1
-+#define CPU_CLK_SRC_PLL1		2
-+
-+#define CCM_PLL1_CFG_ENABLE_SHIFT		31
-+#define CCM_PLL1_CFG_VCO_RST_SHIFT		30
-+#define CCM_PLL1_CFG_VCO_BIAS_SHIFT		26
-+#define CCM_PLL1_CFG_PLL4_EXCH_SHIFT		25
-+#define CCM_PLL1_CFG_BIAS_CUR_SHIFT		20
-+#define CCM_PLL1_CFG_DIVP_SHIFT			16
-+#define CCM_PLL1_CFG_LCK_TMR_SHIFT		13
-+#define CCM_PLL1_CFG_FACTOR_N_SHIFT		8
-+#define CCM_PLL1_CFG_FACTOR_K_SHIFT		4
-+#define CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT	3
-+#define CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT	2
-+#define CCM_PLL1_CFG_FACTOR_M_SHIFT		0
-+
-+#define PLL1_CFG_DEFAULT	0xa1005000
-+
-+#define PLL6_CFG_DEFAULT	0xa1009911
-+
-+/* nand clock */
-+#define NAND_CLK_SRC_OSC24		0
-+#define NAND_CLK_DIV_N			0
-+#define NAND_CLK_DIV_M			0
-+
-+/* gps clock */
-+#define GPS_SCLK_GATING_OFF		0
-+#define GPS_RESET			0
-+
-+/* ahb clock gate bit offset */
-+#define AHB_GATE_OFFSET_GPS		26
-+#define AHB_GATE_OFFSET_SATA		25
-+#define AHB_GATE_OFFSET_PATA		24
-+#define AHB_GATE_OFFSET_SPI3		23
-+#define AHB_GATE_OFFSET_SPI2		22
-+#define AHB_GATE_OFFSET_SPI1		21
-+#define AHB_GATE_OFFSET_SPI0		20
-+#define AHB_GATE_OFFSET_TS0		18
-+#define AHB_GATE_OFFSET_EMAC		17
-+#define AHB_GATE_OFFSET_ACE		16
-+#define AHB_GATE_OFFSET_DLL		15
-+#define AHB_GATE_OFFSET_SDRAM		14
-+#define AHB_GATE_OFFSET_NAND		13
-+#define AHB_GATE_OFFSET_MS		12
-+#define AHB_GATE_OFFSET_MMC3		11
-+#define AHB_GATE_OFFSET_MMC2		10
-+#define AHB_GATE_OFFSET_MMC1		9
-+#define AHB_GATE_OFFSET_MMC0		8
-+#define AHB_GATE_OFFSET_MMC(n)		(AHB_GATE_OFFSET_MMC0 + (n))
-+#define AHB_GATE_OFFSET_BIST		7
-+#define AHB_GATE_OFFSET_DMA		6
-+#define AHB_GATE_OFFSET_SS		5
-+#define AHB_GATE_OFFSET_USB_OHCI1	4
-+#define AHB_GATE_OFFSET_USB_EHCI1	3
-+#define AHB_GATE_OFFSET_USB_OHCI0	2
-+#define AHB_GATE_OFFSET_USB_EHCI0	1
-+#define AHB_GATE_OFFSET_USB		0
-+
-+/* ahb clock gate bit offset (second register) */
-+#define AHB_GATE_OFFSET_GMAC		17
-+
-+#define CCM_AHB_GATE_GPS (0x1 << 26)
-+#define CCM_AHB_GATE_SDRAM (0x1 << 14)
-+#define CCM_AHB_GATE_DLL (0x1 << 15)
-+#define CCM_AHB_GATE_ACE (0x1 << 16)
-+
-+#define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0)
-+#define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3)
-+#define CCM_PLL5_CTRL_M_X(n) ((n) - 1)
-+#define CCM_PLL5_CTRL_M1(n) (((n) & 0x3) << 2)
-+#define CCM_PLL5_CTRL_M1_MASK CCM_PLL5_CTRL_M1(0x3)
-+#define CCM_PLL5_CTRL_M1_X(n) ((n) - 1)
-+#define CCM_PLL5_CTRL_K(n) (((n) & 0x3) << 4)
-+#define CCM_PLL5_CTRL_K_MASK CCM_PLL5_CTRL_K(0x3)
-+#define CCM_PLL5_CTRL_K_X(n) ((n) - 1)
-+#define CCM_PLL5_CTRL_LDO (0x1 << 7)
-+#define CCM_PLL5_CTRL_N(n) (((n) & 0x1f) << 8)
-+#define CCM_PLL5_CTRL_N_MASK CCM_PLL5_CTRL_N(0x1f)
-+#define CCM_PLL5_CTRL_N_X(n) (n)
-+#define CCM_PLL5_CTRL_P(n) (((n) & 0x3) << 16)
-+#define CCM_PLL5_CTRL_P_MASK CCM_PLL5_CTRL_P(0x3)
-+#define CCM_PLL5_CTRL_P_X(n) ((n) - 1)
-+#define CCM_PLL5_CTRL_BW (0x1 << 18)
-+#define CCM_PLL5_CTRL_VCO_GAIN (0x1 << 19)
-+#define CCM_PLL5_CTRL_BIAS(n) (((n) & 0x1f) << 20)
-+#define CCM_PLL5_CTRL_BIAS_MASK CCM_PLL5_CTRL_BIAS(0x1f)
-+#define CCM_PLL5_CTRL_BIAS_X(n) ((n) - 1)
-+#define CCM_PLL5_CTRL_VCO_BIAS (0x1 << 25)
-+#define CCM_PLL5_CTRL_DDR_CLK (0x1 << 29)
-+#define CCM_PLL5_CTRL_BYPASS (0x1 << 30)
-+#define CCM_PLL5_CTRL_EN (0x1 << 31)
-+
-+#define CCM_PLL6_CTRL_N_SHIFT	8
-+#define CCM_PLL6_CTRL_N_MASK	(0x1f << CCM_PLL6_CTRL_N_SHIFT)
-+#define CCM_PLL6_CTRL_K_SHIFT	4
-+#define CCM_PLL6_CTRL_K_MASK	(0x3 << CCM_PLL6_CTRL_K_SHIFT)
-+
-+#define CCM_GPS_CTRL_RESET (0x1 << 0)
-+#define CCM_GPS_CTRL_GATE (0x1 << 1)
-+
-+#define CCM_DRAM_CTRL_DCLK_OUT (0x1 << 15)
-+
-+#define CCM_MBUS_CTRL_M(n) (((n) & 0xf) << 0)
-+#define CCM_MBUS_CTRL_M_MASK CCM_MBUS_CTRL_M(0xf)
-+#define CCM_MBUS_CTRL_M_X(n) ((n) - 1)
-+#define CCM_MBUS_CTRL_N(n) (((n) & 0xf) << 16)
-+#define CCM_MBUS_CTRL_N_MASK CCM_MBUS_CTRL_N(0xf)
-+#define CCM_MBUS_CTRL_N_X(n) (((n) >> 3) ? 3 : (((n) >> 2) ? 2 : (((n) >> 1) ? 1 : 0)))
-+#define CCM_MBUS_CTRL_CLK_SRC(n) (((n) & 0x3) << 24)
-+#define CCM_MBUS_CTRL_CLK_SRC_MASK CCM_MBUS_CTRL_CLK_SRC(0x3)
-+#define CCM_MBUS_CTRL_CLK_SRC_HOSC 0x0
-+#define CCM_MBUS_CTRL_CLK_SRC_PLL6 0x1
-+#define CCM_MBUS_CTRL_CLK_SRC_PLL5 0x2
-+#define CCM_MBUS_CTRL_GATE (0x1 << 31)
-+
-+#define CCM_MMC_CTRL_OSCM24 (0x0 << 24)
-+#define CCM_MMC_CTRL_PLL6   (0x1 << 24)
-+#define CCM_MMC_CTRL_PLL5   (0x2 << 24)
-+
-+#define CCM_MMC_CTRL_ENABLE (0x1 << 31)
-+
-+#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0
-+#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
-+#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
-+#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2)
-+#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2)
-+
-+#endif /* _SUNXI_CLOCK_SUN4I_H */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun6i.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/clock_sun6i.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/clock_sun6i.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,205 @@
-+/*
-+ * sun6i clock register definitions
-+ *
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_CLOCK_SUN6I_H
-+#define _SUNXI_CLOCK_SUN6I_H
-+
-+struct sunxi_ccm_reg {
-+	u32 pll1_cfg;		/* 0x00 pll1 control */
-+	u32 reserved0;
-+	u32 pll2_cfg;		/* 0x08 pll2 control */
-+	u32 reserved1;
-+	u32 pll3_cfg;		/* 0x10 pll3 control */
-+	u32 reserved2;
-+	u32 pll4_cfg;		/* 0x18 pll4 control */
-+	u32 reserved3;
-+	u32 pll5_cfg;		/* 0x20 pll5 control */
-+	u32 reserved4;
-+	u32 pll6_cfg;		/* 0x28 pll6 control */
-+	u32 reserved5;
-+	u32 pll7_cfg;		/* 0x30 pll7 control */
-+	u32 reserved6;
-+	u32 pll8_cfg;		/* 0x38 pll8 control */
-+	u32 reserved7;
-+	u32 mipi_pll_cfg;	/* 0x40 MIPI pll control */
-+	u32 pll9_cfg;		/* 0x44 pll9 control */
-+	u32 pll10_cfg;		/* 0x48 pll10 control */
-+	u32 reserved8;
-+	u32 cpu_axi_cfg;	/* 0x50 CPU/AXI divide ratio */
-+	u32 ahb1_apb1_div;	/* 0x54 AHB1/APB1 divide ratio */
-+	u32 apb2_div;		/* 0x58 APB2 divide ratio */
-+	u32 axi_gate;		/* 0x5c axi module clock gating */
-+	u32 ahb_gate0;		/* 0x60 ahb module clock gating 0 */
-+	u32 ahb_gate1;		/* 0x64 ahb module clock gating 1 */
-+	u32 apb1_gate;		/* 0x68 apb1 module clock gating */
-+	u32 apb2_gate;		/* 0x6c apb2 module clock gating */
-+	u32 reserved9[4];
-+	u32 nand0_clk_cfg;	/* 0x80 nand0 clock control */
-+	u32 nand1_clk_cfg;	/* 0x84 nand1 clock control */
-+	u32 sd0_clk_cfg;	/* 0x88 sd0 clock control */
-+	u32 sd1_clk_cfg;	/* 0x8c sd1 clock control */
-+	u32 sd2_clk_cfg;	/* 0x90 sd2 clock control */
-+	u32 sd3_clk_cfg;	/* 0x94 sd3 clock control */
-+	u32 ts_clk_cfg;		/* 0x98 transport stream clock control */
-+	u32 ss_clk_cfg;		/* 0x9c security system clock control */
-+	u32 spi0_clk_cfg;	/* 0xa0 spi0 clock control */
-+	u32 spi1_clk_cfg;	/* 0xa4 spi1 clock control */
-+	u32 spi2_clk_cfg;	/* 0xa8 spi2 clock control */
-+	u32 spi3_clk_cfg;	/* 0xac spi3 clock control */
-+	u32 i2s0_clk_cfg;	/* 0xb0 I2S0 clock control*/
-+	u32 i2s1_clk_cfg;	/* 0xb4 I2S1 clock control */
-+	u32 reserved10[2];
-+	u32 spdif_clk_cfg;	/* 0xc0 SPDIF clock control */
-+	u32 reserved11[2];
-+	u32 usb_clk_cfg;	/* 0xcc USB clock control */
-+	u32 gmac_clk_cfg;	/* 0xd0 GMAC clock control */
-+	u32 reserved12[7];
-+	u32 mdfs_clk_cfg;	/* 0xf0 MDFS clock control */
-+	u32 dram_clk_cfg;	/* 0xf4 DRAM configuration clock control */
-+	u32 reserved13[2];
-+	u32 dram_clk_gate;	/* 0x100 DRAM module gating */
-+	u32 be0_clk_cfg;	/* 0x104 BE0 module clock */
-+	u32 be1_clk_cfg;	/* 0x108 BE1 module clock */
-+	u32 fe0_clk_cfg;	/* 0x10c FE0 module clock */
-+	u32 fe1_clk_cfg;	/* 0x110 FE1 module clock */
-+	u32 mp_clk_cfg;		/* 0x114 MP module clock */
-+	u32 lcd0_ch0_clk_cfg;	/* 0x118 LCD0 CH0 module clock */
-+	u32 lcd1_ch0_clk_cfg;	/* 0x11c LCD1 CH0 module clock */
-+	u32 reserved14[3];
-+	u32 lcd0_ch1_clk_cfg;	/* 0x12c LCD0 CH1 module clock */
-+	u32 lcd1_ch1_clk_cfg;	/* 0x130 LCD1 CH1 module clock */
-+	u32 csi0_clk_cfg;	/* 0x134 CSI0 module clock */
-+	u32 csi1_clk_cfg;	/* 0x138 CSI1 module clock */
-+	u32 ve_clk_cfg;		/* 0x13c VE module clock */
-+	u32 adda_clk_cfg;	/* 0x140 ADDA module clock */
-+	u32 avs_clk_cfg;	/* 0x144 AVS module clock */
-+	u32 dmic_clk_cfg;	/* 0x148 Digital Mic module clock*/
-+	u32 reserved15;
-+	u32 hdmi_clk_cfg;	/* 0x150 HDMI module clock */
-+	u32 ps_clk_cfg;		/* 0x154 PS module clock */
-+	u32 mtc_clk_cfg;	/* 0x158 MTC module clock */
-+	u32 mbus0_clk_cfg;	/* 0x15c MBUS0 module clock */
-+	u32 mbus1_clk_cfg;	/* 0x160 MBUS1 module clock */
-+	u32 reserved16;
-+	u32 mipi_dsi_clk_cfg;	/* 0x168 MIPI DSI clock control */
-+	u32 mipi_csi_clk_cfg;	/* 0x16c MIPI CSI clock control */
-+	u32 reserved17[4];
-+	u32 iep_drc0_clk_cfg;	/* 0x180 IEP DRC0 module clock */
-+	u32 iep_drc1_clk_cfg;	/* 0x184 IEP DRC1 module clock */
-+	u32 iep_deu0_clk_cfg;	/* 0x188 IEP DEU0 module clock */
-+	u32 iep_deu1_clk_cfg;	/* 0x18c IEP DEU1 module clock */
-+	u32 reserved18[4];
-+	u32 gpu_core_clk_cfg;	/* 0x1a0 GPU core clock config */
-+	u32 gpu_mem_clk_cfg;	/* 0x1a4 GPU memory clock config */
-+	u32 gpu_hyd_clk_cfg;	/* 0x1a0 GPU HYD clock config */
-+	u32 reserved19[21];
-+	u32 pll_lock;		/* 0x200 PLL Lock Time */
-+	u32 pll1_lock;		/* 0x204 PLL1 Lock Time */
-+	u32 reserved20[6];
-+	u32 pll1_bias_cfg;	/* 0x220 PLL1 Bias config */
-+	u32 pll2_bias_cfg;	/* 0x224 PLL2 Bias config */
-+	u32 pll3_bias_cfg;	/* 0x228 PLL3 Bias config */
-+	u32 pll4_bias_cfg;	/* 0x22c PLL4 Bias config */
-+	u32 pll5_bias_cfg;	/* 0x230 PLL5 Bias config */
-+	u32 pll6_bias_cfg;	/* 0x234 PLL6 Bias config */
-+	u32 pll7_bias_cfg;	/* 0x238 PLL7 Bias config */
-+	u32 pll8_bias_cfg;	/* 0x23c PLL8 Bias config */
-+	u32 mipi_bias_cfg;	/* 0x240 MIPI Bias config */
-+	u32 pll9_bias_cfg;	/* 0x244 PLL9 Bias config */
-+	u32 pll10_bias_cfg;	/* 0x248 PLL10 Bias config */
-+	u32 reserved21[13];
-+	u32 pll1_pattern_cfg;	/* 0x280 PLL1 Pattern config */
-+	u32 pll2_pattern_cfg;	/* 0x284 PLL2 Pattern config */
-+	u32 pll3_pattern_cfg;	/* 0x288 PLL3 Pattern config */
-+	u32 pll4_pattern_cfg;	/* 0x28c PLL4 Pattern config */
-+	u32 pll5_pattern_cfg;	/* 0x290 PLL5 Pattern config */
-+	u32 pll6_pattern_cfg;	/* 0x294 PLL6 Pattern config */
-+	u32 pll7_pattern_cfg;	/* 0x298 PLL7 Pattern config */
-+	u32 pll8_pattern_cfg;	/* 0x29c PLL8 Pattern config */
-+	u32 mipi_pattern_cfg;	/* 0x2a0 MIPI Pattern config */
-+	u32 pll9_pattern_cfg;	/* 0x2a4 PLL9 Pattern config */
-+	u32 pll10_pattern_cfg;	/* 0x2a8 PLL10 Pattern config */
-+	u32 reserved22[5];
-+	u32 ahb_reset0_cfg;	/* 0x2c0 AHB1 Reset 0 config */
-+	u32 ahb_reset1_cfg;	/* 0x2c4 AHB1 Reset 1 config */
-+	u32 ahb_reset2_cfg;	/* 0x2c8 AHB1 Reset 2 config */
-+	u32 reserved23;
-+	u32 apb1_reset_cfg;	/* 0x2d0 APB1 Reset config */
-+	u32 reserved24;
-+	u32 apb2_reset_cfg;	/* 0x2d8 APB2 Reset config */
-+};
-+
-+/* apb2 bit field */
-+#define APB2_CLK_SRC_LOSC		(0x0 << 24)
-+#define APB2_CLK_SRC_OSC24M		(0x1 << 24)
-+#define APB2_CLK_SRC_PLL6		(0x2 << 24)
-+#define APB2_CLK_SRC_MASK		(0x3 << 24)
-+#define APB2_CLK_RATE_N_1		(0x0 << 16)
-+#define APB2_CLK_RATE_N_2		(0x1 << 16)
-+#define APB2_CLK_RATE_N_4		(0x2 << 16)
-+#define APB2_CLK_RATE_N_8		(0x3 << 16)
-+#define APB2_CLK_RATE_N_MASK		(3 << 16)
-+#define APB2_CLK_RATE_M(m)		(((m)-1) << 0)
-+#define APB2_CLK_RATE_M_MASK            (0x1f << 0)
-+
-+/* apb2 gate field */
-+#define APB2_GATE_UART_SHIFT	(16)
-+#define APB2_GATE_UART_MASK		(0xff << APB2_GATE_UART_SHIFT)
-+#define APB2_GATE_TWI_SHIFT	(0)
-+#define APB2_GATE_TWI_MASK		(0xf << APB2_GATE_TWI_SHIFT)
-+
-+/* cpu_axi_cfg bits */
-+#define AXI_DIV_SHIFT			0
-+#define ATB_DIV_SHIFT			8
-+#define CPU_CLK_SRC_SHIFT		16
-+
-+#define AXI_DIV_1			0
-+#define AXI_DIV_2			1
-+#define AXI_DIV_3			2
-+#define AXI_DIV_4			3
-+#define ATB_DIV_1			0
-+#define ATB_DIV_2			1
-+#define ATB_DIV_4			2
-+#define CPU_CLK_SRC_OSC24M		1
-+#define CPU_CLK_SRC_PLL1		2
-+
-+#define PLL1_CFG_DEFAULT		0x90011b21
-+
-+#define PLL6_CFG_DEFAULT		0x90041811
-+
-+#define CCM_PLL6_CTRL_N_SHIFT		8
-+#define CCM_PLL6_CTRL_N_MASK		(0x1f << CCM_PLL6_CTRL_N_SHIFT)
-+#define CCM_PLL6_CTRL_K_SHIFT		4
-+#define CCM_PLL6_CTRL_K_MASK		(0x3 << CCM_PLL6_CTRL_K_SHIFT)
-+
-+#define AHB_GATE_OFFSET_MMC3		11
-+#define AHB_GATE_OFFSET_MMC2		10
-+#define AHB_GATE_OFFSET_MMC1		9
-+#define AHB_GATE_OFFSET_MMC0		8
-+#define AHB_GATE_OFFSET_MMC(n)		(AHB_GATE_OFFSET_MMC0 + (n))
-+
-+#define CCM_MMC_CTRL_OSCM24 (0x0 << 24)
-+#define CCM_MMC_CTRL_PLL6   (0x1 << 24)
-+
-+#define CCM_MMC_CTRL_ENABLE (0x1 << 31)
-+
-+#define AHB_RESET_OFFSET_MMC3		11
-+#define AHB_RESET_OFFSET_MMC2		10
-+#define AHB_RESET_OFFSET_MMC1		9
-+#define AHB_RESET_OFFSET_MMC0		8
-+#define AHB_RESET_OFFSET_MMC(n)		(AHB_RESET_OFFSET_MMC0 + (n))
-+
-+/* apb2 reset */
-+#define APB2_RESET_UART_SHIFT		(16)
-+#define APB2_RESET_UART_MASK		(0xff << APB2_RESET_UART_SHIFT)
-+#define APB2_RESET_TWI_SHIFT		(0)
-+#define APB2_RESET_TWI_MASK		(0xf << APB2_RESET_TWI_SHIFT)
-+
-+#endif /* _SUNXI_CLOCK_SUN6I_H */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpucfg.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpucfg.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpucfg.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpucfg.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,55 @@
-+/*
-+ * (C) Copyright 2013
-+ * Carl van Schaik <carl@ok-labs.com>
-+ *
-+ * CPU configuration registers for the sun7i (A20).
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_CPUCFG_H_
-+#define _SUNXI_CPUCFG_H_
-+
-+#ifndef __ASSEMBLY__
-+
-+struct sunxi_cpu_ctrl {
-+	u32 reset_ctrl;
-+	u32 cpu_ctrl;
-+	u32 status;
-+	u32 _res[13];
-+};
-+
-+#define CPU_RESET_SET	0
-+#define CPU_RESET_CLEAR	3
-+
-+#define CPU_STATUS_SMP	(1 << 0)
-+#define CPU_STATUS_WFE	(1 << 1)
-+#define CPU_STATUS_WFI	(1 << 2)
-+
-+struct sunxi_cpucfg {
-+	u32 _res1[16];			/* 0x000 */
-+	struct sunxi_cpu_ctrl cpu[2];	/* 0x040 */
-+	u32 _res2[48];			/* 0x0c0 */
-+	u32 _res3;			/* 0x180 */
-+	u32 general_ctrl;		/* 0x184 */
-+	u32 _res4[2];			/* 0x188 */
-+	u32 event_input;		/* 0x190 */
-+	u32 _res5[4];			/* 0x194 */
-+	u32 boot_addr;			/* 0x1a4 - also known as PRIVATE_REG */
-+	u32 _res6[2];			/* 0x1a8 */
-+	u32 cpu1_power_clamp;		/* 0x1b0 */
-+	u32 cpu1_power_off;		/* 0x1b4 */
-+	u32 _res7[10];			/* 0x1b8 */
-+	u32 debug0_ctrl;		/* 0x1e0 */
-+	u32 debug1_ctrl;		/* 0x1e4 */
-+};
-+
-+#define GENERAL_CTRL_NO_L1_RESET_CPU(x)	(1UL << (x))
-+#define GENERAL_CTRL_NO_L2_AUTO_RESET	(1UL << 4)
-+#define GENERAL_CTRL_L2_RESET_SET	(0UL << 5)
-+#define GENERAL_CTRL_L2_RESET_CLEAR	(1UL << 5)
-+#define GENERAL_CTRL_CFGSDISABLE	(1UL << 8)
-+
-+#endif /* __ASSEMBLY__ */
-+
-+#endif /* _SUNXI_CPUCFG_H_ */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpu.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpu.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/cpu.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/cpu.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,141 @@
-+/*
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_CPU_H
-+#define _SUNXI_CPU_H
-+
-+#define SUNXI_SRAM_A1_BASE		0x00000000
-+#define SUNXI_SRAM_A1_SIZE		(16 * 1024)	/* 16 kiB */
-+
-+#define SUNXI_SRAM_A2_BASE		0x00004000	/* 16 kiB */
-+#define SUNXI_SRAM_A3_BASE		0x00008000	/* 13 kiB */
-+#define SUNXI_SRAM_A4_BASE		0x0000b400	/* 3 kiB */
-+#define SUNXI_SRAM_D_BASE		0x00010000	/* 4 kiB */
-+#define SUNXI_SRAM_B_BASE		0x00020000	/* 64 kiB (secure) */
-+
-+#define SUNXI_SRAMC_BASE		0x01c00000
-+#define SUNXI_DRAMC_BASE		0x01c01000
-+#define SUNXI_DMA_BASE			0x01c02000
-+#define SUNXI_NFC_BASE			0x01c03000
-+#define SUNXI_TS_BASE			0x01c04000
-+#define SUNXI_SPI0_BASE			0x01c05000
-+#define SUNXI_SPI1_BASE			0x01c06000
-+#define SUNXI_MS_BASE			0x01c07000
-+#define SUNXI_TVD_BASE			0x01c08000
-+#define SUNXI_CSI0_BASE			0x01c09000
-+#define SUNXI_TVE0_BASE			0x01c0a000
-+#define SUNXI_EMAC_BASE			0x01c0b000
-+#define SUNXI_LCD0_BASE			0x01c0C000
-+#define SUNXI_LCD1_BASE			0x01c0d000
-+#define SUNXI_VE_BASE			0x01c0e000
-+#define SUNXI_MMC0_BASE			0x01c0f000
-+#define SUNXI_MMC1_BASE			0x01c10000
-+#define SUNXI_MMC2_BASE			0x01c11000
-+#define SUNXI_MMC3_BASE			0x01c12000
-+#define SUNXI_USB0_BASE			0x01c13000
-+#define SUNXI_USB1_BASE			0x01c14000
-+#define SUNXI_SS_BASE			0x01c15000
-+#define SUNXI_HDMI_BASE			0x01c16000
-+#define SUNXI_SPI2_BASE			0x01c17000
-+#define SUNXI_SATA_BASE			0x01c18000
-+#define SUNXI_PATA_BASE			0x01c19000
-+#define SUNXI_ACE_BASE			0x01c1a000
-+#define SUNXI_TVE1_BASE			0x01c1b000
-+#define SUNXI_USB2_BASE			0x01c1c000
-+#define SUNXI_CSI1_BASE			0x01c1d000
-+#define SUNXI_TZASC_BASE		0x01c1e000
-+#define SUNXI_SPI3_BASE			0x01c1f000
-+
-+#define SUNXI_CCM_BASE			0x01c20000
-+#define SUNXI_INTC_BASE			0x01c20400
-+#define SUNXI_PIO_BASE			0x01c20800
-+#define SUNXI_TIMER_BASE		0x01c20c00
-+#define SUNXI_SPDIF_BASE		0x01c21000
-+#define SUNXI_AC97_BASE			0x01c21400
-+#define SUNXI_IR0_BASE			0x01c21800
-+#define SUNXI_IR1_BASE			0x01c21c00
-+
-+#define SUNXI_IIS_BASE			0x01c22400
-+#define SUNXI_LRADC_BASE		0x01c22800
-+#define SUNXI_AD_DA_BASE		0x01c22c00
-+#define SUNXI_KEYPAD_BASE		0x01c23000
-+#define SUNXI_TZPC_BASE			0x01c23400
-+#define SUNXI_SID_BASE			0x01c23800
-+#define SUNXI_SJTAG_BASE		0x01c23c00
-+
-+#define SUNXI_TP_BASE			0x01c25000
-+#define SUNXI_PMU_BASE			0x01c25400
-+#define SUNXI_CPUCFG_BASE		0x01c25c00	/* sun7i only ? */
-+
-+#define SUNXI_UART0_BASE		0x01c28000
-+#define SUNXI_UART1_BASE		0x01c28400
-+#define SUNXI_UART2_BASE		0x01c28800
-+#define SUNXI_UART3_BASE		0x01c28c00
-+#define SUNXI_UART4_BASE		0x01c29000
-+#define SUNXI_UART5_BASE		0x01c29400
-+#define SUNXI_UART6_BASE		0x01c29800
-+#define SUNXI_UART7_BASE		0x01c29c00
-+#define SUNXI_PS2_0_BASE		0x01c2a000
-+#define SUNXI_PS2_1_BASE		0x01c2a400
-+
-+#define SUNXI_TWI0_BASE			0x01c2ac00
-+#define SUNXI_TWI1_BASE			0x01c2b000
-+#define SUNXI_TWI2_BASE			0x01c2b400
-+
-+#define SUNXI_CAN_BASE			0x01c2bc00
-+
-+#define SUNXI_SCR_BASE			0x01c2c400
-+
-+#define SUNXI_GPS_BASE			0x01c30000
-+#define SUNXI_MALI400_BASE		0x01c40000
-+#define SUNXI_GMAC_BASE			0x01c50000
-+
-+#define SUNXI_DRAM_COM_BASE		0x01c62000
-+#define SUNXI_DRAM_CTL_BASE		0x01c63000
-+#define SUNXI_DRAM_PHY_CH1_BASE		0x01c65000
-+#define SUNXI_DRAM_PHY_CH2_BASE		0x01c66000
-+
-+/* module sram */
-+#define SUNXI_SRAM_C_BASE		0x01d00000
-+
-+#define SUNXI_DE_FE0_BASE		0x01e00000
-+#define SUNXI_DE_FE1_BASE		0x01e20000
-+#define SUNXI_DE_BE0_BASE		0x01e60000
-+#define SUNXI_DE_BE1_BASE		0x01e40000
-+#define SUNXI_MP_BASE			0x01e80000
-+#define SUNXI_AVG_BASE			0x01ea0000
-+
-+#define SUNXI_PRCM_BASE			0x01f01400
-+#define SUNXI_R_UART_BASE		0x01f02800
-+#define SUNXI_R_PIO_BASE		0x01f02c00
-+#define SUNXI_P2WI_BASE			0x01f03400
-+
-+/* CoreSight Debug Module */
-+#define SUNXI_CSDM_BASE			0x3f500000
-+
-+#define SUNXI_DDRII_DDRIII_BASE		0x40000000	/* 2 GiB */
-+
-+#define SUNXI_BROM_BASE			0xffff0000	/* 32 kiB */
-+
-+#define SUNXI_CPU_CFG			(SUNXI_TIMER_BASE + 0x13c)
-+
-+#ifndef __ASSEMBLY__
-+/* boot type */
-+enum sunxi_boot_type_t {
-+	SUNXI_BOOT_TYPE_NULL,
-+	SUNXI_BOOT_TYPE_MMC0,
-+	SUNXI_BOOT_TYPE_NAND,
-+	SUNXI_BOOT_TYPE_MMC2,
-+	SUNXI_BOOT_TYPE_SPI
-+};
-+
-+void sunxi_board_init(void);
-+void sunxi_reset(void);
-+#endif /* __ASSEMBLY__ */
-+
-+#endif /* _CPU_H */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/dram.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/dram.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/dram.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/dram.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,179 @@
-+/*
-+ * (C) Copyright 2007-2012
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Berg Xing <bergxing@allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * Sunxi platform dram register definition.
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_DRAM_H
-+#define _SUNXI_DRAM_H
-+
-+#include <linux/types.h>
-+
-+struct sunxi_dram_reg {
-+	u32 ccr;		/* 0x00 controller configuration register */
-+	u32 dcr;		/* 0x04 dram configuration register */
-+	u32 iocr;		/* 0x08 i/o configuration register */
-+	u32 csr;		/* 0x0c controller status register */
-+	u32 drr;		/* 0x10 dram refresh register */
-+	u32 tpr0;		/* 0x14 dram timing parameters register 0 */
-+	u32 tpr1;		/* 0x18 dram timing parameters register 1 */
-+	u32 tpr2;		/* 0x1c dram timing parameters register 2 */
-+	u32 gdllcr;		/* 0x20 global dll control register */
-+	u8 res0[0x28];
-+	u32 rslr0;		/* 0x4c rank system latency register */
-+	u32 rslr1;		/* 0x50 rank system latency register */
-+	u8 res1[0x8];
-+	u32 rdgr0;		/* 0x5c rank dqs gating register */
-+	u32 rdgr1;		/* 0x60 rank dqs gating register */
-+	u8 res2[0x34];
-+	u32 odtcr;		/* 0x98 odt configuration register */
-+	u32 dtr0;		/* 0x9c data training register 0 */
-+	u32 dtr1;		/* 0xa0 data training register 1 */
-+	u32 dtar;		/* 0xa4 data training address register */
-+	u32 zqcr0;		/* 0xa8 zq control register 0 */
-+	u32 zqcr1;		/* 0xac zq control register 1 */
-+	u32 zqsr;		/* 0xb0 zq status register */
-+	u32 idcr;		/* 0xb4 initializaton delay configure reg */
-+	u8 res3[0x138];
-+	u32 mr;			/* 0x1f0 mode register */
-+	u32 emr;		/* 0x1f4 extended mode register */
-+	u32 emr2;		/* 0x1f8 extended mode register */
-+	u32 emr3;		/* 0x1fc extended mode register */
-+	u32 dllctr;		/* 0x200 dll control register */
-+	u32 dllcr[5];		/* 0x204 dll control register 0(byte 0) */
-+	/* 0x208 dll control register 1(byte 1) */
-+	/* 0x20c dll control register 2(byte 2) */
-+	/* 0x210 dll control register 3(byte 3) */
-+	/* 0x214 dll control register 4(byte 4) */
-+	u32 dqtr0;		/* 0x218 dq timing register */
-+	u32 dqtr1;		/* 0x21c dq timing register */
-+	u32 dqtr2;		/* 0x220 dq timing register */
-+	u32 dqtr3;		/* 0x224 dq timing register */
-+	u32 dqstr;		/* 0x228 dqs timing register */
-+	u32 dqsbtr;		/* 0x22c dqsb timing register */
-+	u32 mcr;		/* 0x230 mode configure register */
-+	u8 res[0x8];
-+	u32 ppwrsctl;		/* 0x23c pad power save control */
-+	u32 apr;		/* 0x240 arbiter period register */
-+	u32 pldtr;		/* 0x244 priority level data threshold reg */
-+	u8 res5[0x8];
-+	u32 hpcr[32];		/* 0x250 host port configure register */
-+	u8 res6[0x10];
-+	u32 csel;		/* 0x2e0 controller select register */
-+};
-+
-+struct dram_para {
-+	u32 clock;
-+	u32 type;
-+	u32 rank_num;
-+	u32 density;
-+	u32 io_width;
-+	u32 bus_width;
-+	u32 cas;
-+	u32 zq;
-+	u32 odt_en;
-+	u32 size;
-+	u32 tpr0;
-+	u32 tpr1;
-+	u32 tpr2;
-+	u32 tpr3;
-+	u32 tpr4;
-+	u32 tpr5;
-+	u32 emr1;
-+	u32 emr2;
-+	u32 emr3;
-+};
-+
-+#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5)
-+#define DRAM_CCR_DQS_GATE (0x1 << 14)
-+#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17)
-+#define DRAM_CCR_ITM_OFF (0x1 << 28)
-+#define DRAM_CCR_DATA_TRAINING (0x1 << 30)
-+#define DRAM_CCR_INIT (0x1 << 31)
-+
-+#define DRAM_MEMORY_TYPE_DDR1 1
-+#define DRAM_MEMORY_TYPE_DDR2 2
-+#define DRAM_MEMORY_TYPE_DDR3 3
-+#define DRAM_MEMORY_TYPE_LPDDR2 4
-+#define DRAM_MEMORY_TYPE_LPDDR 5
-+#define DRAM_DCR_TYPE (0x1 << 0)
-+#define DRAM_DCR_TYPE_DDR2 0x0
-+#define DRAM_DCR_TYPE_DDR3 0x1
-+#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1)
-+#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3)
-+#define DRAM_DCR_IO_WIDTH_8BIT 0x0
-+#define DRAM_DCR_IO_WIDTH_16BIT 0x1
-+#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3)
-+#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7)
-+#define DRAM_DCR_CHIP_DENSITY_256M 0x0
-+#define DRAM_DCR_CHIP_DENSITY_512M 0x1
-+#define DRAM_DCR_CHIP_DENSITY_1024M 0x2
-+#define DRAM_DCR_CHIP_DENSITY_2048M 0x3
-+#define DRAM_DCR_CHIP_DENSITY_4096M 0x4
-+#define DRAM_DCR_CHIP_DENSITY_8192M 0x5
-+#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6)
-+#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7)
-+#define DRAM_DCR_BUS_WIDTH_32BIT 0x3
-+#define DRAM_DCR_BUS_WIDTH_16BIT 0x1
-+#define DRAM_DCR_BUS_WIDTH_8BIT 0x0
-+#define DRAM_DCR_NR_DLLCR_32BIT 5
-+#define DRAM_DCR_NR_DLLCR_16BIT 3
-+#define DRAM_DCR_NR_DLLCR_8BIT 2
-+#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10)
-+#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3)
-+#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12)
-+#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13)
-+#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3)
-+#define DRAM_DCR_MODE_SEQ 0x0
-+#define DRAM_DCR_MODE_INTERLEAVE 0x1
-+
-+#define DRAM_CSR_FAILED (0x1 << 20)
-+
-+#define DRAM_DRR_TRFC(n) ((n) & 0xff)
-+#define DRAM_DRR_TREFI(n) (((n) & 0xffff) << 8)
-+#define DRAM_DRR_BURST(n) ((((n) - 1) & 0xf) << 24)
-+
-+#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0)
-+#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3)
-+#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2)
-+#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3)
-+#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4)
-+#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3)
-+#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6)
-+#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3)
-+#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8)
-+#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7)
-+#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11)
-+#define DRAM_MCR_RESET (0x1 << 12)
-+#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13)
-+#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3)
-+#define DRAM_MCR_DCLK_OUT (0x1 << 16)
-+
-+#define DRAM_DLLCR_NRESET (0x1 << 30)
-+#define DRAM_DLLCR_DISABLE (0x1 << 31)
-+
-+#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20)
-+#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff)
-+
-+#define DRAM_IOCR_ODT_EN(n) ((((n) & 0x3) << 30) | ((n) & 0x3) << 0)
-+#define DRAM_IOCR_ODT_EN_MASK DRAM_IOCR_ODT_EN(0x3)
-+
-+#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0)
-+#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7)
-+#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4)
-+#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7)
-+#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9)
-+#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7)
-+#define DRAM_MR_POWER_DOWN (0x1 << 12)
-+
-+#define DRAM_CSEL_MAGIC 0x16237495
-+
-+unsigned long sunxi_dram_init(void);
-+unsigned long dramc_init(struct dram_para *para);
-+
-+#endif /* _SUNXI_DRAM_H */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/early_print.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/early_print.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/early_print.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/early_print.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,58 @@
-+/*
-+ * (C) Copyright 2007-2012
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * Early uart print for debugging.
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_EARLY_PRINT_H
-+#define _SUNXI_EARLY_PRINT_H
-+
-+#include <asm/arch/cpu.h>
-+
-+#define SUNXI_UART_BASE SUNXI_UART0_BASE
-+
-+#define UART_OFFSET 0x400
-+
-+/* receive buffer register */
-+#define UART_RBR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x0)
-+/* transmit holding register */
-+#define UART_THR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x0)
-+/* divisor latch low register */
-+#define UART_DLL(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x0)
-+
-+/* divisor latch high register */
-+#define UART_DLH(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x4)
-+/* interrupt enable reigster */
-+#define UART_IER(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x4)
-+
-+/* interrupt identity register */
-+#define UART_IIR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x8)
-+/* fifo control register */
-+#define UART_FCR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x8)
-+
-+/* line control register */
-+#define UART_LCR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0xc)
-+#define UART_LCR_DLAB (0x1 << 7)
-+
-+/* line status register */
-+#define UART_LSR(n) (SUNXI_UART_BASE + (n) * UART_OFFSET + 0x14)
-+#define UART_LSR_TEMT (0x1 << 6)
-+
-+
-+#define BAUD_115200    (0xd) /* 24 * 1000 * 1000 / 16 / 115200 = 13 */
-+#define NO_PARITY      (0)
-+#define ONE_STOP_BIT   (0)
-+#define DAT_LEN_8_BITS (3)
-+#define LC_8_N_1          (NO_PARITY << 3 | ONE_STOP_BIT << 2 | DAT_LEN_8_BITS)
-+
-+#ifndef __ASSEMBLY__
-+void uart_init(void);
-+void uart_putc(char c);
-+void uart_puts(const char *s);
-+#endif /* __ASSEMBLY__ */
-+
-+#endif /* _SUNXI_EARLY_PRINT_H */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/gpio.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/gpio.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/gpio.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/gpio.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,174 @@
-+/*
-+ * (C) Copyright 2007-2012
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_GPIO_H
-+#define _SUNXI_GPIO_H
-+
-+#include <linux/types.h>
-+#include <asm/arch/cpu.h>
-+
-+/*
-+ * sunxi has 9 banks of gpio, they are:
-+ * PA0 - PA17 | PB0 - PB23 | PC0 - PC24
-+ * PD0 - PD27 | PE0 - PE31 | PF0 - PF5
-+ * PG0 - PG9  | PH0 - PH27 | PI0 - PI12
-+ */
-+
-+#define SUNXI_GPIO_A	0
-+#define SUNXI_GPIO_B	1
-+#define SUNXI_GPIO_C	2
-+#define SUNXI_GPIO_D	3
-+#define SUNXI_GPIO_E	4
-+#define SUNXI_GPIO_F	5
-+#define SUNXI_GPIO_G	6
-+#define SUNXI_GPIO_H	7
-+#define SUNXI_GPIO_I	8
-+#define SUNXI_GPIO_BANKS 9
-+
-+/*
-+ * sun6i has atleast 1 additional bank, note banks J K don't exist!
-+ * PL0 - PL1 at the very least is known.
-+ *
-+ * Note this bank is at a different register offset!
-+ */
-+#define SUNXI_GPIO_L	9
-+
-+struct sunxi_gpio {
-+	u32 cfg[4];
-+	u32 dat;
-+	u32 drv[2];
-+	u32 pull[2];
-+};
-+
-+/* gpio interrupt control */
-+struct sunxi_gpio_int {
-+	u32 cfg[3];
-+	u32 ctl;
-+	u32 sta;
-+	u32 deb;		/* interrupt debounce */
-+};
-+
-+struct sunxi_gpio_reg {
-+	struct sunxi_gpio gpio_bank[SUNXI_GPIO_BANKS];
-+	u8 res[0xbc];
-+	struct sunxi_gpio_int gpio_int;
-+};
-+
-+#define BANK_TO_GPIO(bank)	(((bank) < SUNXI_GPIO_BANKS) ? \
-+	&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \
-+	(struct sunxi_gpio *)SUNXI_R_PIO_BASE)
-+
-+#define GPIO_BANK(pin)		((pin) >> 5)
-+#define GPIO_NUM(pin)		((pin) & 0x1f)
-+
-+#define GPIO_CFG_INDEX(pin)	(((pin) & 0x1f) >> 3)
-+#define GPIO_CFG_OFFSET(pin)	((((pin) & 0x1f) & 0x7) << 2)
-+
-+#define GPIO_DRV_INDEX(pin)   (((pin) & 0x1f) >> 4)
-+#define GPIO_DRV_OFFSET(pin)	((((pin) & 0x1f) & 0xf) << 1)
-+
-+#define GPIO_PULL_INDEX(pin)	(((pin) & 0x1f) >> 4)
-+#define GPIO_PULL_OFFSET(pin)	((((pin) & 0x1f) & 0xf) << 1)
-+
-+/* GPIO bank sizes */
-+#define SUNXI_GPIO_A_NR		32
-+#define SUNXI_GPIO_B_NR		32
-+#define SUNXI_GPIO_C_NR		32
-+#define SUNXI_GPIO_D_NR		32
-+#define SUNXI_GPIO_E_NR		32
-+#define SUNXI_GPIO_F_NR		32
-+#define SUNXI_GPIO_G_NR		32
-+#define SUNXI_GPIO_H_NR		32
-+#define SUNXI_GPIO_I_NR		32
-+#define SUNXI_GPIO_L_NR		32
-+
-+#define SUNXI_GPIO_NEXT(__gpio) \
-+	((__gpio##_START) + (__gpio##_NR) + 0)
-+
-+enum sunxi_gpio_number {
-+	SUNXI_GPIO_A_START = 0,
-+	SUNXI_GPIO_B_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_A),
-+	SUNXI_GPIO_C_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_B),
-+	SUNXI_GPIO_D_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_C),
-+	SUNXI_GPIO_E_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_D),
-+	SUNXI_GPIO_F_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_E),
-+	SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
-+	SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
-+	SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
-+	SUNXI_GPIO_L_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_I),
-+};
-+
-+/* SUNXI GPIO number definitions */
-+#define SUNXI_GPA(_nr)	(SUNXI_GPIO_A_START + (_nr))
-+#define SUNXI_GPB(_nr)	(SUNXI_GPIO_B_START + (_nr))
-+#define SUNXI_GPC(_nr)	(SUNXI_GPIO_C_START + (_nr))
-+#define SUNXI_GPD(_nr)	(SUNXI_GPIO_D_START + (_nr))
-+#define SUNXI_GPE(_nr)	(SUNXI_GPIO_E_START + (_nr))
-+#define SUNXI_GPF(_nr)	(SUNXI_GPIO_F_START + (_nr))
-+#define SUNXI_GPG(_nr)	(SUNXI_GPIO_G_START + (_nr))
-+#define SUNXI_GPH(_nr)	(SUNXI_GPIO_H_START + (_nr))
-+#define SUNXI_GPI(_nr)	(SUNXI_GPIO_I_START + (_nr))
-+#define SUNXI_GPL(_nr)	(SUNXI_GPIO_L_START + (_nr))
-+
-+/* GPIO pin function config */
-+#define SUNXI_GPIO_INPUT	0
-+#define SUNXI_GPIO_OUTPUT	1
-+
-+#define SUNXI_GPA0_EMAC		2
-+#define SUN7I_GPA0_GMAC		5
-+
-+#define SUNXI_GPB0_TWI0		2
-+
-+#define SUN4I_GPB22_UART0_TX	2
-+#define SUN4I_GPB23_UART0_RX	2
-+
-+#define SUN5I_GPB19_UART0_TX	2
-+#define SUN5I_GPB20_UART0_RX	2
-+
-+#define SUN5I_GPG3_UART1_TX	4
-+#define SUN5I_GPG4_UART1_RX	4
-+
-+#define SUNXI_GPC6_SDC2		3
-+
-+#define SUNXI_GPF0_SDC0		2
-+
-+#define SUNXI_GPF2_SDC0		2
-+
-+#ifdef CONFIG_SUN8I
-+#define SUNXI_GPF2_UART0_TX	3
-+#define SUNXI_GPF4_UART0_RX	3
-+#else
-+#define SUNXI_GPF2_UART0_TX	4
-+#define SUNXI_GPF4_UART0_RX	4
-+#endif
-+
-+#define SUN4I_GPG0_SDC1		4
-+
-+#define SUN4I_GPH22_SDC1	5
-+
-+#define SUN4I_GPI4_SDC3		2
-+
-+/* GPIO pin pull-up/down config */
-+#define SUNXI_GPIO_PULL_DISABLE	0
-+#define SUNXI_GPIO_PULL_UP	1
-+#define SUNXI_GPIO_PULL_DOWN	2
-+
-+#define SUNXI_GPL0_R_P2WI_SCK	3
-+#define SUNXI_GPL1_R_P2WI_SDA	3
-+
-+#define SUN8I_GPL2_R_UART_TX	2
-+#define SUN8I_GPL3_R_UART_RX	2
-+
-+int sunxi_gpio_set_cfgpin(u32 pin, u32 val);
-+int sunxi_gpio_get_cfgpin(u32 pin);
-+int sunxi_gpio_set_drv(u32 pin, u32 val);
-+int sunxi_gpio_set_pull(u32 pin, u32 val);
-+int sunxi_name_to_gpio(const char *name);
-+#define name_to_gpio(name) sunxi_name_to_gpio(name)
-+
-+#endif /* _SUNXI_GPIO_H */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/i2c.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/i2c.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/i2c.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/i2c.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,15 @@
-+/*
-+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+#ifndef _SUNXI_I2C_H_
-+#define _SUNXI_I2C_H_
-+
-+#include <asm/arch/cpu.h>
-+
-+#define CONFIG_I2C_MVTWSI_BASE	SUNXI_TWI0_BASE
-+/* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */
-+#define CONFIG_SYS_TCLK		24000000
-+
-+#endif
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/mmc.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/mmc.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/mmc.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/mmc.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,122 @@
-+/*
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Aaron <leafy.myeh@allwinnertech.com>
-+ *
-+ * MMC register definition for allwinner sunxi platform.
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_MMC_H
-+#define _SUNXI_MMC_H
-+
-+#include <linux/types.h>
-+
-+struct sunxi_mmc {
-+	u32 gctrl;		/* 0x00 global control */
-+	u32 clkcr;		/* 0x04 clock control */
-+	u32 timeout;		/* 0x08 time out */
-+	u32 width;		/* 0x0c bus width */
-+	u32 blksz;		/* 0x10 block size */
-+	u32 bytecnt;		/* 0x14 byte count */
-+	u32 cmd;		/* 0x18 command */
-+	u32 arg;		/* 0x1c argument */
-+	u32 resp0;		/* 0x20 response 0 */
-+	u32 resp1;		/* 0x24 response 1 */
-+	u32 resp2;		/* 0x28 response 2 */
-+	u32 resp3;		/* 0x2c response 3 */
-+	u32 imask;		/* 0x30 interrupt mask */
-+	u32 mint;		/* 0x34 masked interrupt status */
-+	u32 rint;		/* 0x38 raw interrupt status */
-+	u32 status;		/* 0x3c status */
-+	u32 ftrglevel;		/* 0x40 FIFO threshold watermark*/
-+	u32 funcsel;		/* 0x44 function select */
-+	u32 cbcr;		/* 0x48 CIU byte count */
-+	u32 bbcr;		/* 0x4c BIU byte count */
-+	u32 dbgc;		/* 0x50 debug enable */
-+	u32 res0[11];
-+	u32 dmac;		/* 0x80 internal DMA control */
-+	u32 dlba;		/* 0x84 internal DMA descr list base address */
-+	u32 idst;		/* 0x88 internal DMA status */
-+	u32 idie;		/* 0x8c internal DMA interrupt enable */
-+	u32 chda;		/* 0x90 */
-+	u32 cbda;		/* 0x94 */
-+};
-+
-+#define SUNXI_MMC_CLK_POWERSAVE		(0x1 << 17)
-+#define SUNXI_MMC_CLK_ENABLE		(0x1 << 16)
-+#define SUNXI_MMC_CLK_DIVIDER_MASK	(0xff)
-+
-+#define SUNXI_MMC_GCTRL_SOFT_RESET	(0x1 << 0)
-+#define SUNXI_MMC_GCTRL_FIFO_RESET	(0x1 << 1)
-+#define SUNXI_MMC_GCTRL_DMA_RESET	(0x1 << 2)
-+#define SUNXI_MMC_GCTRL_RESET		(SUNXI_MMC_GCTRL_SOFT_RESET|\
-+					 SUNXI_MMC_GCTRL_FIFO_RESET|\
-+					 SUNXI_MMC_GCTRL_DMA_RESET)
-+#define SUNXI_MMC_GCTRL_DMA_ENABLE	(0x1 << 5)
-+#define SUNXI_MMC_GCTRL_ACCESS_BY_AHB   (0x1 << 31)
-+
-+#define SUNXI_MMC_CMD_RESP_EXPIRE	(0x1 << 6)
-+#define SUNXI_MMC_CMD_LONG_RESPONSE	(0x1 << 7)
-+#define SUNXI_MMC_CMD_CHK_RESPONSE_CRC	(0x1 << 8)
-+#define SUNXI_MMC_CMD_DATA_EXPIRE	(0x1 << 9)
-+#define SUNXI_MMC_CMD_WRITE		(0x1 << 10)
-+#define SUNXI_MMC_CMD_AUTO_STOP		(0x1 << 12)
-+#define SUNXI_MMC_CMD_WAIT_PRE_OVER	(0x1 << 13)
-+#define SUNXI_MMC_CMD_SEND_INIT_SEQ	(0x1 << 15)
-+#define SUNXI_MMC_CMD_UPCLK_ONLY	(0x1 << 21)
-+#define SUNXI_MMC_CMD_START		(0x1 << 31)
-+
-+#define SUNXI_MMC_RINT_RESP_ERROR		(0x1 << 1)
-+#define SUNXI_MMC_RINT_COMMAND_DONE		(0x1 << 2)
-+#define SUNXI_MMC_RINT_DATA_OVER		(0x1 << 3)
-+#define SUNXI_MMC_RINT_TX_DATA_REQUEST		(0x1 << 4)
-+#define SUNXI_MMC_RINT_RX_DATA_REQUEST		(0x1 << 5)
-+#define SUNXI_MMC_RINT_RESP_CRC_ERROR		(0x1 << 6)
-+#define SUNXI_MMC_RINT_DATA_CRC_ERROR		(0x1 << 7)
-+#define SUNXI_MMC_RINT_RESP_TIMEOUT		(0x1 << 8)
-+#define SUNXI_MMC_RINT_DATA_TIMEOUT		(0x1 << 9)
-+#define SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE	(0x1 << 10)
-+#define SUNXI_MMC_RINT_FIFO_RUN_ERROR		(0x1 << 11)
-+#define SUNXI_MMC_RINT_HARD_WARE_LOCKED		(0x1 << 12)
-+#define SUNXI_MMC_RINT_START_BIT_ERROR		(0x1 << 13)
-+#define SUNXI_MMC_RINT_AUTO_COMMAND_DONE	(0x1 << 14)
-+#define SUNXI_MMC_RINT_END_BIT_ERROR		(0x1 << 15)
-+#define SUNXI_MMC_RINT_SDIO_INTERRUPT		(0x1 << 16)
-+#define SUNXI_MMC_RINT_CARD_INSERT		(0x1 << 30)
-+#define SUNXI_MMC_RINT_CARD_REMOVE		(0x1 << 31)
-+#define SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT      \
-+	(SUNXI_MMC_RINT_RESP_ERROR |		\
-+	 SUNXI_MMC_RINT_RESP_CRC_ERROR |	\
-+	 SUNXI_MMC_RINT_DATA_CRC_ERROR |	\
-+	 SUNXI_MMC_RINT_RESP_TIMEOUT |		\
-+	 SUNXI_MMC_RINT_DATA_TIMEOUT |		\
-+	 SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE |	\
-+	 SUNXI_MMC_RINT_FIFO_RUN_ERROR |	\
-+	 SUNXI_MMC_RINT_HARD_WARE_LOCKED |	\
-+	 SUNXI_MMC_RINT_START_BIT_ERROR |	\
-+	 SUNXI_MMC_RINT_END_BIT_ERROR) /* 0xbfc2 */
-+#define SUNXI_MMC_RINT_INTERRUPT_DONE_BIT	\
-+	(SUNXI_MMC_RINT_AUTO_COMMAND_DONE |	\
-+	 SUNXI_MMC_RINT_DATA_OVER |		\
-+	 SUNXI_MMC_RINT_COMMAND_DONE |		\
-+	 SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE)
-+
-+#define SUNXI_MMC_STATUS_RXWL_FLAG		(0x1 << 0)
-+#define SUNXI_MMC_STATUS_TXWL_FLAG		(0x1 << 1)
-+#define SUNXI_MMC_STATUS_FIFO_EMPTY		(0x1 << 2)
-+#define SUNXI_MMC_STATUS_FIFO_FULL		(0x1 << 3)
-+#define SUNXI_MMC_STATUS_CARD_PRESENT		(0x1 << 8)
-+#define SUNXI_MMC_STATUS_CARD_DATA_BUSY		(0x1 << 9)
-+#define SUNXI_MMC_STATUS_DATA_FSM_BUSY		(0x1 << 10)
-+
-+#define SUNXI_MMC_IDMAC_RESET		(0x1 << 0)
-+#define SUNXI_MMC_IDMAC_FIXBURST	(0x1 << 1)
-+#define SUNXI_MMC_IDMAC_ENABLE		(0x1 << 7)
-+
-+#define SUNXI_MMC_IDIE_TXIRQ		(0x1 << 0)
-+#define SUNXI_MMC_IDIE_RXIRQ		(0x1 << 1)
-+
-+int sunxi_mmc_init(int sdc_no);
-+#endif /* _SUNXI_MMC_H */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/p2wi.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/p2wi.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/p2wi.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/p2wi.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,142 @@
-+/*
-+ * Sunxi platform Push-Push i2c register definition.
-+ *
-+ * (c) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
-+ * http://linux-sunxi.org
-+ *
-+ * (c)Copyright 2006-2013
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Berg Xing <bergxing@allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_P2WI_H
-+#define _SUNXI_P2WI_H
-+
-+#include <linux/types.h>
-+
-+#define P2WI_CTRL_RESET (0x1 << 0)
-+#define P2WI_CTRL_IRQ_EN (0x1 << 1)
-+#define P2WI_CTRL_TRANS_ABORT (0x1 << 6)
-+#define P2WI_CTRL_TRANS_START (0x1 << 7)
-+
-+#define __P2WI_CC_CLK(n) (((n) & 0xff) << 0)
-+#define P2WI_CC_CLK_MASK __P2WI_CC_CLK_DIV(0xff)
-+#define __P2WI_CC_CLK_DIV(n) (((n) >> 1) - 1)
-+#define P2WI_CC_CLK_DIV(n) \
-+	__P2WI_CC_CLK(__P2WI_CC_CLK_DIV(n))
-+#define P2WI_CC_SDA_OUT_DELAY(n) (((n) & 0x7) << 8)
-+#define P2WI_CC_SDA_OUT_DELAY_MASK P2WI_CC_SDA_OUT_DELAY(0x7)
-+
-+#define P2WI_IRQ_TRANS_DONE (0x1 << 0)
-+#define P2WI_IRQ_TRANS_ERR (0x1 << 1)
-+#define P2WI_IRQ_LOAD_BUSY (0x1 << 2)
-+
-+#define P2WI_STAT_TRANS_DONE (0x1 << 0)
-+#define P2WI_STAT_TRANS_ERR (0x1 << 1)
-+#define P2WI_STAT_LOAD_BUSY (0x1 << 2)
-+#define __P2WI_STAT_TRANS_ERR(n) (((n) & 0xff) << 8)
-+#define P2WI_STAT_TRANS_ERR_MASK __P2WI_STAT_TRANS_ERR_ID(0xff)
-+#define __P2WI_STAT_TRANS_ERR_BYTE_1 0x01
-+#define __P2WI_STAT_TRANS_ERR_BYTE_2 0x02
-+#define __P2WI_STAT_TRANS_ERR_BYTE_3 0x04
-+#define __P2WI_STAT_TRANS_ERR_BYTE_4 0x08
-+#define __P2WI_STAT_TRANS_ERR_BYTE_5 0x10
-+#define __P2WI_STAT_TRANS_ERR_BYTE_6 0x20
-+#define __P2WI_STAT_TRANS_ERR_BYTE_7 0x40
-+#define __P2WI_STAT_TRANS_ERR_BYTE_8 0x80
-+#define P2WI_STAT_TRANS_ERR_BYTE_1 \
-+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_1)
-+#define P2WI_STAT_TRANS_ERR_BYTE_2 \
-+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_2)
-+#define P2WI_STAT_TRANS_ERR_BYTE_3 \
-+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_3)
-+#define P2WI_STAT_TRANS_ERR_BYTE_4 \
-+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_4)
-+#define P2WI_STAT_TRANS_ERR_BYTE_5 \
-+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_5)
-+#define P2WI_STAT_TRANS_ERR_BYTE_6 \
-+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_6)
-+#define P2WI_STAT_TRANS_ERR_BYTE_7 \
-+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_7)
-+#define P2WI_STAT_TRANS_ERR_BYTE_8 \
-+	__P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_8)
-+
-+#define P2WI_DATADDR_BYTE_1(n) (((n) & 0xff) << 0)
-+#define P2WI_DATADDR_BYTE_1_MASK P2WI_DATADDR_BYTE_1(0xff)
-+#define P2WI_DATADDR_BYTE_2(n) (((n) & 0xff) << 8)
-+#define P2WI_DATADDR_BYTE_2_MASK P2WI_DATADDR_BYTE_2(0xff)
-+#define P2WI_DATADDR_BYTE_3(n) (((n) & 0xff) << 16)
-+#define P2WI_DATADDR_BYTE_3_MASK P2WI_DATADDR_BYTE_3(0xff)
-+#define P2WI_DATADDR_BYTE_4(n) (((n) & 0xff) << 24)
-+#define P2WI_DATADDR_BYTE_4_MASK P2WI_DATADDR_BYTE_4(0xff)
-+#define P2WI_DATADDR_BYTE_5(n) (((n) & 0xff) << 0)
-+#define P2WI_DATADDR_BYTE_5_MASK P2WI_DATADDR_BYTE_5(0xff)
-+#define P2WI_DATADDR_BYTE_6(n) (((n) & 0xff) << 8)
-+#define P2WI_DATADDR_BYTE_6_MASK P2WI_DATADDR_BYTE_6(0xff)
-+#define P2WI_DATADDR_BYTE_7(n) (((n) & 0xff) << 16)
-+#define P2WI_DATADDR_BYTE_7_MASK P2WI_DATADDR_BYTE_7(0xff)
-+#define P2WI_DATADDR_BYTE_8(n) (((n) & 0xff) << 24)
-+#define P2WI_DATADDR_BYTE_8_MASK P2WI_DATADDR_BYTE_8(0xff)
-+
-+#define __P2WI_DATA_NUM_BYTES(n) (((n) & 0x7) << 0)
-+#define P2WI_DATA_NUM_BYTES_MASK __P2WI_DATA_NUM_BYTES(0x7)
-+#define P2WI_DATA_NUM_BYTES(n) __P2WI_DATA_NUM_BYTES((n) - 1)
-+#define P2WI_DATA_NUM_BYTES_READ (0x1 << 4)
-+
-+#define P2WI_DATA_BYTE_1(n) (((n) & 0xff) << 0)
-+#define P2WI_DATA_BYTE_1_MASK P2WI_DATA_BYTE_1(0xff)
-+#define P2WI_DATA_BYTE_2(n) (((n) & 0xff) << 8)
-+#define P2WI_DATA_BYTE_2_MASK P2WI_DATA_BYTE_2(0xff)
-+#define P2WI_DATA_BYTE_3(n) (((n) & 0xff) << 16)
-+#define P2WI_DATA_BYTE_3_MASK P2WI_DATA_BYTE_3(0xff)
-+#define P2WI_DATA_BYTE_4(n) (((n) & 0xff) << 24)
-+#define P2WI_DATA_BYTE_4_MASK P2WI_DATA_BYTE_4(0xff)
-+#define P2WI_DATA_BYTE_5(n) (((n) & 0xff) << 0)
-+#define P2WI_DATA_BYTE_5_MASK P2WI_DATA_BYTE_5(0xff)
-+#define P2WI_DATA_BYTE_6(n) (((n) & 0xff) << 8)
-+#define P2WI_DATA_BYTE_6_MASK P2WI_DATA_BYTE_6(0xff)
-+#define P2WI_DATA_BYTE_7(n) (((n) & 0xff) << 16)
-+#define P2WI_DATA_BYTE_7_MASK P2WI_DATA_BYTE_7(0xff)
-+#define P2WI_DATA_BYTE_8(n) (((n) & 0xff) << 24)
-+#define P2WI_DATA_BYTE_8_MASK P2WI_DATA_BYTE_8(0xff)
-+
-+#define P2WI_LINECTRL_SDA_CTRL_EN (0x1 << 0)
-+#define P2WI_LINECTRL_SDA_OUT_HIGH (0x1 << 1)
-+#define P2WI_LINECTRL_SCL_CTRL_EN (0x1 << 2)
-+#define P2WI_LINECTRL_SCL_OUT_HIGH (0x1 << 3)
-+#define P2WI_LINECTRL_SDA_STATE_HIGH (0x1 << 4)
-+#define P2WI_LINECTRL_SCL_STATE_HIGH (0x1 << 5)
-+
-+#define P2WI_PM_DEV_ADDR(n) (((n) & 0xff) << 0)
-+#define P2WI_PM_DEV_ADDR_MASK P2WI_PM_DEV_ADDR(0xff)
-+#define P2WI_PM_CTRL_ADDR(n) (((n) & 0xff) << 8)
-+#define P2WI_PM_CTRL_ADDR_MASK P2WI_PM_CTRL_ADDR(0xff)
-+#define P2WI_PM_INIT_DATA(n) (((n) & 0xff) << 16)
-+#define P2WI_PM_INIT_DATA_MASK P2WI_PM_INIT_DATA(0xff)
-+#define P2WI_PM_INIT_SEND (0x1 << 31)
-+
-+#ifndef __ASSEMBLY__
-+struct sunxi_p2wi_reg {
-+	u32 ctrl;	/* 0x00 control */
-+	u32 cc;		/* 0x04 clock control */
-+	u32 irq;	/* 0x08 interrupt */
-+	u32 status;	/* 0x0c status */
-+	u32 dataddr0;	/* 0x10 data address 0 */
-+	u32 dataddr1;	/* 0x14 data address 1 */
-+	u32 numbytes;	/* 0x18 num bytes */
-+	u32 data0;	/* 0x1c data buffer 0 */
-+	u32 data1;	/* 0x20 data buffer 1 */
-+	u32 linectrl;	/* 0x24 line control */
-+	u32 pm;		/* 0x28 power management */
-+};
-+
-+void p2wi_init(void);
-+int p2wi_set_pmu_address(u8 slave_addr, u8 ctrl_reg, u8 init_data);
-+int p2wi_read(const u8 addr, u8 *data);
-+int p2wi_write(const u8 addr, u8 data);
-+
-+#endif /* __ASSEMBLY__ */
-+#endif /* _SUNXI_P2WI_H */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/prcm.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/prcm.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/prcm.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/prcm.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,238 @@
-+/*
-+ * Sunxi A31 Power Management Unit register definition.
-+ *
-+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
-+ * http://linux-sunxi.org
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Berg Xing <bergxing@allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_PRCM_H
-+#define _SUNXI_PRCM_H
-+
-+#define __PRCM_CPUS_CFG_PRE(n) (((n) & 0x3) << 4)
-+#define PRCM_CPUS_CFG_PRE_MASK __PRCM_CPUS_CFG_PRE(0x3)
-+#define __PRCM_CPUS_CFG_PRE_DIV(n) (((n) >> 1) - 1)
-+#define PRCM_CPUS_CFG_PRE_DIV(n) \
-+	__PRCM_CPUS_CFG_PRE(__PRCM_CPUS_CFG_CLK_PRE(n))
-+#define __PRCM_CPUS_CFG_POST(n) (((n) & 0x1f) << 8)
-+#define PRCM_CPUS_CFG_POST_MASK __PRCM_CPUS_CFG_POST(0x1f)
-+#define __PRCM_CPUS_CFG_POST_DIV(n) ((n) - 1)
-+#define PRCM_CPUS_CFG_POST_DIV(n) \
-+	__PRCM_CPUS_CFG_POST_DIV(__PRCM_CPUS_CFG_POST_DIV(n))
-+#define __PRCM_CPUS_CFG_CLK_SRC(n) (((n) & 0x3) << 16)
-+#define PRCM_CPUS_CFG_CLK_SRC_MASK __PRCM_CPUS_CFG_CLK_SRC(0x3)
-+#define __PRCM_CPUS_CFG_CLK_SRC_LOSC 0x0
-+#define __PRCM_CPUS_CFG_CLK_SRC_HOSC 0x1
-+#define __PRCM_CPUS_CFG_CLK_SRC_PLL6 0x2
-+#define __PRCM_CPUS_CFG_CLK_SRC_PDIV 0x3
-+#define PRCM_CPUS_CFG_CLK_SRC_LOSC \
-+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_LOSC)
-+#define PRCM_CPUS_CFG_CLK_SRC_HOSC \
-+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_HOSC)
-+#define PRCM_CPUS_CFG_CLK_SRC_PLL6 \
-+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PLL6)
-+#define PRCM_CPUS_CFG_CLK_SRC_PDIV \
-+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PDIV)
-+
-+#define __PRCM_APB0_RATIO(n) (((n) & 0x3) <<0)
-+#define PRCM_APB0_RATIO_DIV_MASK __PRCM_APB0_RATIO_DIV(0x3)
-+#define __PRCM_APB0_RATIO_DIV(n) (((n) >> 1) - 1)
-+#define PRCM_APB0_RATIO_DIV(n) \
-+	__PRCM_APB0_RATIO(__PRCM_APB0_RATIO_DIV(n))
-+
-+#define PRCM_CPU_CFG_NEON_CLK_EN (0x1 << 0)
-+#define PRCM_CPU_CFG_CPU_CLK_EN (0x1 << 1)
-+
-+#define PRCM_APB0_GATE_PIO (0x1 << 0)
-+#define PRCM_APB0_GATE_IR (0x1 << 1)
-+#define PRCM_APB0_GATE_TIMER01 (0x1 << 2)
-+#define PRCM_APB0_GATE_P2WI (0x1 << 3)
-+#define PRCM_APB0_GATE_UART (0x1 << 4)
-+#define PRCM_APB0_GATE_1WIRE (0x1 << 5)
-+#define PRCM_APB0_GATE_I2C (0x1 << 6)
-+
-+#define PRCM_APB0_RESET_PIO (0x1 << 0)
-+#define PRCM_APB0_RESET_IR (0x1 << 1)
-+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
-+#define PRCM_APB0_RESET_P2WI (0x1 << 3)
-+#define PRCM_APB0_RESET_UART (0x1 << 4)
-+#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
-+#define PRCM_APB0_RESET_I2C (0x1 << 6)
-+
-+#define PRCM_PLL_CTRL_PLL_BIAS (0x1 << 0)
-+#define PRCM_PLL_CTRL_HOSC_GAIN_ENH (0x1 << 1)
-+#define __PRCM_PLL_CTRL_USB_CLK_SRC(n) (((n) & 0x3) << 4)
-+#define PRCM_PLL_CTRL_USB_CLK_SRC_MASK \
-+	__PRCM_PLL_CTRL_USB_CLK_SRC(0x3)
-+#define __PRCM_PLL_CTRL_USB_CLK_0 0x0
-+#define __PRCM_PLL_CTRL_USB_CLK_1 0x1
-+#define __PRCM_PLL_CTRL_USB_CLK_2 0x2
-+#define __PRCM_PLL_CTRL_USB_CLK_3 0x3
-+#define PRCM_PLL_CTRL_USB_CLK_0 \
-+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_0)
-+#define PRCM_PLL_CTRL_USB_CLK_1 \
-+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_1)
-+#define PRCM_PLL_CTRL_USB_CLK_2 \
-+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_2)
-+#define PRCM_PLL_CTRL_USB_CLK_3 \
-+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_3)
-+#define __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) (((n) & 0x3) << 12)
-+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL_MASK \
-+	__PRCM_PLL_CTRL_INT_PLL_IN_SEL(0x3)
-+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) \
-+	__PRCM_PLL_CTRL_INT_PLL_IN_SEL(n)
-+#define __PRCM_PLL_CTRL_HOSC_CLK_SEL(n) (((n) & 0x3) << 20)
-+#define PRCM_PLL_CTRL_HOSC_CLK_SEL_MASK \
-+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(0x3)
-+#define __PRCM_PLL_CTRL_HOSC_CLK_0 0x0
-+#define __PRCM_PLL_CTRL_HOSC_CLK_1 0x1
-+#define __PRCM_PLL_CTRL_HOSC_CLK_2 0x2
-+#define __PRCM_PLL_CTRL_HOSC_CLK_3 0x3
-+#define PRCM_PLL_CTRL_HOSC_CLK_0 \
-+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_0)
-+#define PRCM_PLL_CTRL_HOSC_CLK_1 \
-+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_1)
-+#define PRCM_PLL_CTRL_HOSC_CLK_2 \
-+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_2)
-+#define PRCM_PLL_CTRL_HOSC_CLK_3 \
-+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_3)
-+#define PRCM_PLL_CTRL_PLL_TST_SRC_EXT (0x1 << 24)
-+#define PRCM_PLL_CTRL_LDO_DIGITAL_EN (0x1 << 0)
-+#define PRCM_PLL_CTRL_LDO_ANALOG_EN (0x1 << 1)
-+#define PRCM_PLL_CTRL_EXT_OSC_EN (0x1 << 2)
-+#define PRCM_PLL_CTRL_CLK_TST_EN (0x1 << 3)
-+#define PRCM_PLL_CTRL_IN_PWR_HIGH (0x1 << 15) /* 3.3 for hi 2.5 for lo */
-+#define __PRCM_PLL_CTRL_VDD_LDO_OUT(n) (((n) & 0x7) << 16)
-+#define PRCM_PLL_CTRL_LDO_OUT_MASK \
-+	__PRCM_PLL_CTRL_LDO_OUT(0x7)
-+/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
-+#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
-+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
-+#define PRCM_PLL_CTRL_LDO_OUT_H(n) \
-+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
-+#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
-+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
-+#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
-+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
-+#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
-+
-+#define PRCM_CLK_1WIRE_GATE (0x1 << 31)
-+
-+#define __PRCM_CLK_MOD0_M(n) (((n) & 0xf) << 0)
-+#define PRCM_CLK_MOD0_M_MASK __PRCM_CLK_MOD0_M(0xf)
-+#define __PRCM_CLK_MOD0_M_X(n) (n - 1)
-+#define PRCM_CLK_MOD0_M(n) __PRCM_CLK_MOD0_M(__PRCM_CLK_MOD0_M_X(n))
-+#define PRCM_CLK_MOD0_OUT_PHASE(n) (((n) & 0x7) << 8)
-+#define PRCM_CLK_MOD0_OUT_PHASE_MASK(n) PRCM_CLK_MOD0_OUT_PHASE(0x7)
-+#define _PRCM_CLK_MOD0_N(n) (((n) & 0x3) << 16)
-+#define PRCM_CLK_MOD0_N_MASK __PRCM_CLK_MOD_N(0x3)
-+#define __PRCM_CLK_MOD0_N_X(n) (((n) >> 1) -1)
-+#define PRCM_CLK_MOD0_N(n) __PRCM_CLK_MOD0_N(__PRCM_CLK_MOD0_N_X(n))
-+#define PRCM_CLK_MOD0_SMPL_PHASE(n) (((n) & 0x7) << 20)
-+#define PRCM_CLK_MOD0_SMPL_PHASE_MASK PRCM_CLK_MOD0_SMPL_PHASE(0x7)
-+#define PRCM_CLK_MOD0_SRC_SEL(n) (((n) & 0x7) << 24)
-+#define PRCM_CLK_MOD0_SRC_SEL_MASK PRCM_CLK_MOD0_SRC_SEL(0x7)
-+#define PRCM_CLK_MOD0_GATE_EN (0x1 << 31)
-+
-+#define PRCM_APB0_RESET_PIO (0x1 << 0)
-+#define PRCM_APB0_RESET_IR (0x1 << 1)
-+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
-+#define PRCM_APB0_RESET_P2WI (0x1 << 3)
-+#define PRCM_APB0_RESET_UART (0x1 << 4)
-+#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
-+#define PRCM_APB0_RESET_I2C (0x1 << 6)
-+
-+#define __PRCM_CLK_OUTD_M(n) (((n) & 0x7) << 8)
-+#define PRCM_CLK_OUTD_M_MASK __PRCM_CLK_OUTD_M(0x7)
-+#define __PRCM_CLK_OUTD_M_X() ((n) - 1)
-+#define PRCM_CLK_OUTD_M(n) __PRCM_CLK_OUTD_M(__PRCM_CLK_OUTD_M_X(n))
-+#define __PRCM_CLK_OUTD_N(n) (((n) & 0x7) << 20)
-+#define PRCM_CLK_OUTD_N_MASK __PRCM_CLK_OUTD_N(0x7)
-+#define __PRCM_CLK_OUTD_N_X(n) (((n) >> 1) - 1)
-+#define PRCM_CLK_OUTD_N(n) __PRCM_CLK_OUTD_N(__PRCM_CLK_OUTD_N_X(n)
-+#define __PRCM_CLK_OUTD_SRC_SEL(n) (((n) & 0x3) << 24)
-+#define PRCM_CLK_OUTD_SRC_SEL_MASK __PRCM_CLK_OUTD_SRC_SEL(0x3)
-+#define __PRCM_CLK_OUTD_SRC_LOSC2 0x0
-+#define __PRCM_CLK_OUTD_SRC_LOSC 0x1
-+#define __PRCM_CLK_OUTD_SRC_HOSC 0x2
-+#define __PRCM_CLK_OUTD_SRC_ERR 0x3
-+#define PRCM_CLK_OUTD_SRC_LOSC2 \
-+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC2)
-+#define PRCM_CLK_OUTD_SRC_LOSC \
-+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC)
-+#define PRCM_CLK_OUTD_SRC_HOSC \
-+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_HOSC)
-+#define PRCM_CLK_OUTD_SRC_ERR \
-+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_ERR)
-+#define PRCM_CLK_OUTD_EN (0x1 << 31)
-+
-+#define PRCM_CPU0_PWROFF (0x1 << 0)
-+#define PRCM_CPU1_PWROFF (0x1 << 1)
-+#define PRCM_CPU2_PWROFF (0x1 << 2)
-+#define PRCM_CPU3_PWROFF (0x1 << 3)
-+#define PRCM_CPU_ALL_PWROFF (0xf << 0)
-+
-+#define PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF (0x1 << 0)
-+#define PRCM_VDD_SYS_DRAM_CH1_PAD_HOLD_PWROFF (0x1 << 1)
-+#define PRCM_VDD_SYS_AVCC_A_PWROFF (0x1 << 2)
-+#define PRCM_VDD_SYS_CPU0_VDD_PWROFF (0x1 << 3)
-+
-+#define PRCM_VDD_GPU_PWROFF (0x1 << 0)
-+
-+#define PRCM_VDD_SYS_RESET (0x1 << 0)
-+
-+#define PRCM_CPU1_PWR_CLAMP(n) (((n) & 0xff) << 0)
-+#define PRCM_CPU1_PWR_CLAMP_MASK PRCM_CPU1_PWR_CLAMP(0xff)
-+
-+#define PRCM_CPU2_PWR_CLAMP(n) (((n) & 0xff) << 0)
-+#define PRCM_CPU2_PWR_CLAMP_MASK PRCM_CPU2_PWR_CLAMP(0xff)
-+
-+#define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0)
-+#define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff)
-+
-+#ifndef __ASSEMBLY__
-+struct sunxi_prcm_reg {
-+	u32 cpus_cfg;		/* 0x000 */
-+	u8 res0[0x8];		/* 0x004 */
-+	u32 apb0_ratio;		/* 0x00c */
-+	u32 cpu0_cfg;		/* 0x010 */
-+	u32 cpu1_cfg;		/* 0x014 */
-+	u32 cpu2_cfg;		/* 0x018 */
-+	u32 cpu3_cfg;		/* 0x01c */
-+	u8 res1[0x8];		/* 0x020 */
-+	u32 apb0_gate;		/* 0x028 */
-+	u8 res2[0x14];		/* 0x02c */
-+	u32 pll_ctrl0;		/* 0x040 */
-+	u32 pll_ctrl1;		/* 0x044 */
-+	u8 res3[0x8];		/* 0x048 */
-+	u32 clk_1wire;		/* 0x050 */
-+	u32 clk_ir;		/* 0x054 */
-+	u8 res4[0x58];		/* 0x058 */
-+	u32 apb0_reset;		/* 0x0b0 */
-+	u8 res5[0x3c];		/* 0x0b4 */
-+	u32 clk_outd;		/* 0x0f0 */
-+	u8 res6[0xc];		/* 0x0f4 */
-+	u32 cpu_pwroff;		/* 0x100 */
-+	u8 res7[0xc];		/* 0x104 */
-+	u32 vdd_sys_pwroff;	/* 0x110 */
-+	u8 res8[0x4];		/* 0x114 */
-+	u32 gpu_pwroff;		/* 0x118 */
-+	u8 res9[0x4];		/* 0x11c */
-+	u32 vdd_pwr_reset;	/* 0x120 */
-+	u8 res10[0x20];		/* 0x124 */
-+	u32 cpu1_pwr_clamp;	/* 0x144 */
-+	u32 cpu2_pwr_clamp;	/* 0x148 */
-+	u32 cpu3_pwr_clamp;	/* 0x14c */
-+	u8 res11[0x30];		/* 0x150 */
-+	u32 dram_pwr;		/* 0x180 */
-+	u8 res12[0xc];		/* 0x184 */
-+	u32 dram_tst;		/* 0x190 */
-+};
-+
-+void prcm_apb0_enable(u32 flags);
-+#endif /* __ASSEMBLY__ */
-+#endif /* _PRCM_H */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/smp.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/smp.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/smp.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/smp.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,22 @@
-+/*
-+ * (C) Copyright 2013
-+ * Carl van Schaik <carl@ok-labs.com>
-+ *
-+ * CPU configuration registers for the sun7i (A20).
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_SMP_H_
-+#define _SUNXI_SMP_H_
-+
-+#ifndef __ASSEMBLY__
-+
-+void startup_secondaries(void);
-+
-+/* Assembly entry point */
-+extern void secondary_init(void);
-+
-+#endif /* __ASSEMBLY__ */
-+
-+#endif /* _SUNXI_SMP_H_ */
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/spl.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/spl.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/spl.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/spl.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,20 @@
-+/*
-+ * This is a copy of omap3/spl.h:
-+ *
-+ * (C) Copyright 2012
-+ * Texas Instruments, <www.ti.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+#ifndef	_ASM_ARCH_SPL_H_
-+#define	_ASM_SPL_H_
-+
-+#define BOOT_DEVICE_NONE	0
-+#define BOOT_DEVICE_XIP		1
-+#define BOOT_DEVICE_NAND	2
-+#define BOOT_DEVICE_ONE_NAND	3
-+#define BOOT_DEVICE_MMC2	5 /*emmc*/
-+#define BOOT_DEVICE_MMC1	6
-+#define BOOT_DEVICE_XIPWAIT	7
-+#define BOOT_DEVICE_MMC2_2      0xff
-+#endif
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/sys_proto.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/sys_proto.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/sys_proto.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/sys_proto.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,16 @@
-+/*
-+ * (C) Copyright 2007-2012
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SYS_PROTO_H_
-+#define _SYS_PROTO_H_
-+
-+#include <linux/types.h>
-+
-+void sdelay(unsigned long);
-+
-+#endif
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/timer.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/timer.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/timer.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/timer.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,88 @@
-+/*
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * Configuration settings for the Allwinner A10-evb board.
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_TIMER_H_
-+#define _SUNXI_TIMER_H_
-+
-+#ifndef __ASSEMBLY__
-+
-+#include <linux/types.h>
-+
-+/* General purpose timer */
-+struct sunxi_timer {
-+	u32 ctl;
-+	u32 inter;
-+	u32 val;
-+	u8 res[4];
-+};
-+
-+/* Audio video sync*/
-+struct sunxi_avs {
-+	u32 ctl;		/* 0x80 */
-+	u32 cnt0;		/* 0x84 */
-+	u32 cnt1;		/* 0x88 */
-+	u32 div;		/* 0x8c */
-+};
-+
-+/* 64 bit counter */
-+struct sunxi_64cnt {
-+	u32 ctl;		/* 0xa0 */
-+	u32 lo;			/* 0xa4 */
-+	u32 hi;			/* 0xa8 */
-+};
-+
-+/* Watchdog */
-+struct sunxi_wdog {
-+	u32 ctl;		/* 0x90 */
-+	u32 mode;		/* 0x94 */
-+};
-+
-+/* Rtc */
-+struct sunxi_rtc {
-+	u32 ctl;		/* 0x100 */
-+	u32 yymmdd;		/* 0x104 */
-+	u32 hhmmss;		/* 0x108 */
-+};
-+
-+/* Alarm */
-+struct sunxi_alarm {
-+	u32 ddhhmmss;		/* 0x10c */
-+	u32 hhmmss;		/* 0x110 */
-+	u32 en;			/* 0x114 */
-+	u32 irqen;		/* 0x118 */
-+	u32 irqsta;		/* 0x11c */
-+};
-+
-+/* Timer general purpose register */
-+struct sunxi_tgp {
-+	u32 tgpd;
-+};
-+
-+struct sunxi_timer_reg {
-+	u32 tirqen;		/* 0x00 */
-+	u32 tirqsta;		/* 0x04 */
-+	u8 res1[8];
-+	struct sunxi_timer timer[6];	/* We have 6 timers */
-+	u8 res2[16];
-+	struct sunxi_avs avs;
-+	struct sunxi_wdog wdog;
-+	u8 res3[8];
-+	struct sunxi_64cnt cnt64;
-+	u8 res4[0x58];
-+	struct sunxi_rtc rtc;
-+	struct sunxi_alarm alarm;
-+	struct sunxi_tgp tgp[4];
-+	u8 res5[8];
-+	u32 cpu_cfg;
-+};
-+
-+#endif /* __ASSEMBLY__ */
-+
-+#endif
-diff -ruN u-boot-2014.04/arch/arm/include/asm/arch-sunxi/watchdog.h u-boot-sunxi/arch/arm/include/asm/arch-sunxi/watchdog.h
---- u-boot-2014.04/arch/arm/include/asm/arch-sunxi/watchdog.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/arch/arm/include/asm/arch-sunxi/watchdog.h	2014-09-06 16:58:35.381953139 +0200
-@@ -0,0 +1,22 @@
-+/*
-+ * Watchdog driver for the Allwinner sunxi platform.
-+ * Copyright (C) 2013  Oliver Schinagl <oliver@schinagl.nl>
-+ * http://www.linux-sunxi.org/
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_WATCHDOG_H_
-+#define _SUNXI_WATCHDOG_H_
-+
-+/* Timeout limits */
-+#define WDT_MAX_TIMEOUT 16
-+#define WDT_OFF -1
-+
-+#ifndef __ASSEMBLY__
-+void watchdog_reset(void);
-+void watchdog_set(int timeout);
-+void watchdog_init(void);
-+#endif /* __ASSEMBLY__ */
-+
-+#endif
-diff -ruN u-boot-2014.04/board/sunxi/board.c u-boot-sunxi/board/sunxi/board.c
---- u-boot-2014.04/board/sunxi/board.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/board.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,239 @@
-+/*
-+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
-+ *
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * Some board init for the Allwinner A10-evb board.
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#ifdef CONFIG_AXP152_POWER
-+#include <axp152.h>
-+#endif
-+#ifdef CONFIG_AXP209_POWER
-+#include <axp209.h>
-+#endif
-+#ifdef CONFIG_AXP221_POWER
-+#include <axp221.h>
-+#endif
-+#include <asm/arch/clock.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/dram.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/mmc.h>
-+#include <asm/io.h>
-+#include <net.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+/* add board specific code here */
-+int board_init(void)
-+{
-+	int id_pfr1;
-+
-+	gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
-+
-+	asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1));
-+	debug("id_pfr1: 0x%08x\n", id_pfr1);
-+	/* Generic Timer Extension available? */
-+	if ((id_pfr1 >> 16) & 0xf) {
-+		debug("Setting CNTFRQ\n");
-+		/* CNTFRQ == 24 MHz */
-+		asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000));
-+	}
-+
-+#ifdef CONFIG_STATUS_LED
-+	status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
-+#endif
-+	return 0;
-+}
-+
-+#ifdef CONFIG_DISPLAY_BOARDINFO
-+int checkboard(void)
-+{
-+	printf("Board: %s\n", CONFIG_SYS_BOARD_NAME);
-+
-+	return 0;
-+}
-+#endif
-+
-+int dram_init(void)
-+{
-+	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_GENERIC_MMC
-+static void mmc_pinmux_setup(int sdc)
-+{
-+	unsigned int pin;
-+
-+	switch (sdc) {
-+	case 0:
-+		/* D1-PF0, D0-PF1, CLK-PF2, CMD-PF3, D3-PF4, D4-PF5 */
-+		for (pin = SUNXI_GPF(0); pin <= SUNXI_GPF(5); pin++) {
-+			sunxi_gpio_set_cfgpin(pin, SUNXI_GPF0_SDC0);
-+			sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
-+			sunxi_gpio_set_drv(pin, 2);
-+		}
-+		break;
-+
-+	case 1:
-+		/* CMD-PH22, CLK-PH23, D0~D3-PH24~27 : 5 */
-+		for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) {
-+			sunxi_gpio_set_cfgpin(pin, SUN4I_GPH22_SDC1);
-+			sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
-+			sunxi_gpio_set_drv(pin, 2);
-+		}
-+		break;
-+
-+	case 2:
-+		/* CMD-PC6, CLK-PC7, D0-PC8, D1-PC9, D2-PC10, D3-PC11 */
-+		for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(11); pin++) {
-+			sunxi_gpio_set_cfgpin(pin, SUNXI_GPC6_SDC2);
-+			sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
-+			sunxi_gpio_set_drv(pin, 2);
-+		}
-+		break;
-+
-+	case 3:
-+		/* CMD-PI4, CLK-PI5, D0~D3-PI6~9 : 2 */
-+		for (pin = SUNXI_GPI(4); pin <= SUNXI_GPI(9); pin++) {
-+			sunxi_gpio_set_cfgpin(pin, SUN4I_GPI4_SDC3);
-+			sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
-+			sunxi_gpio_set_drv(pin, 2);
-+		}
-+		break;
-+
-+	default:
-+		printf("sunxi: invalid MMC slot %d for pinmux setup\n", sdc);
-+		break;
-+	}
-+}
-+
-+int board_mmc_init(bd_t *bis)
-+{
-+	mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT);
-+	sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT);
-+#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA)
-+	mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA);
-+	sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA);
-+#endif
-+
-+	return 0;
-+}
-+#endif
-+
-+void i2c_init_board(void)
-+{
-+	sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUNXI_GPB0_TWI0);
-+	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUNXI_GPB0_TWI0);
-+	clock_twi_onoff(0, 1);
-+}
-+
-+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
-+void sunxi_board_init(void)
-+{
-+	int power_failed = 0;
-+#if !defined(CONFIG_SUN6I) && !defined(CONFIG_SUN8I)
-+	unsigned long ramsize;
-+#endif
-+
-+#ifdef CONFIG_AXP152_POWER
-+	power_failed = axp152_init();
-+	power_failed |= axp152_set_dcdc2(1400);
-+	power_failed |= axp152_set_dcdc3(1500);
-+	power_failed |= axp152_set_dcdc4(1250);
-+	power_failed |= axp152_set_ldo2(3000);
-+#endif
-+#ifdef CONFIG_AXP209_POWER
-+	power_failed |= axp209_init();
-+	power_failed |= axp209_set_dcdc2(1400);
-+#ifdef CONFIG_FAST_MBUS
-+	power_failed |= axp209_set_dcdc3(1300);
-+#else
-+	power_failed |= axp209_set_dcdc3(1250);
-+#endif
-+	power_failed |= axp209_set_ldo2(3000);
-+	power_failed |= axp209_set_ldo3(2800);
-+	power_failed |= axp209_set_ldo4(2800);
-+#endif
-+#ifdef CONFIG_AXP221_POWER
-+	power_failed = axp221_init();
-+	power_failed |= axp221_set_dcdc1(3300);
-+	power_failed |= axp221_set_dcdc2(1200);
-+	power_failed |= axp221_set_dcdc3(1260);
-+	power_failed |= axp221_set_dcdc4(1200);
-+	power_failed |= axp221_set_dcdc5(1500);
-+#ifdef CONFIG_ENABLE_DLDO1_POWER
-+	power_failed |= axp221_set_dldo1(3300);
-+#endif
-+#endif
-+
-+#if !defined(CONFIG_SUN6I) && !defined(CONFIG_SUN8I)
-+	printf("DRAM:");
-+	ramsize = sunxi_dram_init();
-+	printf(" %lu MiB\n", ramsize >> 20);
-+	if (!ramsize)
-+		hang();
-+
-+	/*
-+	 * Only clock up the CPU to full speed if we are reasonably
-+	 * assured it's being powered with suitable core voltage
-+	 */
-+	if (!power_failed)
-+		clock_set_pll1(CONFIG_CLK_FULL_SPEED);
-+	else
-+		printf("Failed to set core voltage! Can't set CPU frequency\n");
-+#endif
-+}
-+#endif
-+
-+#if defined(CONFIG_SPL_OS_BOOT) && defined(CONFIG_AXP209_POWER)
-+int spl_start_uboot(void)
-+{
-+	if (axp209_poweron_by_dc())
-+		return 0;
-+	axp209_power_button(); /* Clear any pending button event */
-+	mdelay(100);
-+	return axp209_power_button();
-+}
-+#endif
-+
-+#ifdef CONFIG_SPL_DISPLAY_PRINT
-+void spl_display_print(void)
-+{
-+	printf("Board: %s\n", CONFIG_SYS_BOARD_NAME);
-+}
-+#endif
-+
-+#ifdef CONFIG_MISC_INIT_R
-+int misc_init_r(void)
-+{
-+	if (!getenv("ethaddr")) {
-+		uint32_t reg_val = readl(SUNXI_SID_BASE);
-+
-+		if (reg_val) {
-+			uint8_t mac_addr[6];
-+
-+			mac_addr[0] = 0x02; /* Non OUI / registered MAC address */
-+			mac_addr[1] = (reg_val >>  0) & 0xff;
-+			reg_val = readl(SUNXI_SID_BASE + 0x0c);
-+			mac_addr[2] = (reg_val >> 24) & 0xff;
-+			mac_addr[3] = (reg_val >> 16) & 0xff;
-+			mac_addr[4] = (reg_val >>  8) & 0xff;
-+			mac_addr[5] = (reg_val >>  0) & 0xff;
-+
-+			eth_setenv_enetaddr("ethaddr", mac_addr);
-+		}
-+	}
-+
-+	return 0;
-+}
-+#endif
-diff -ruN u-boot-2014.04/board/sunxi/dram_a10_olinuxino_l.c u-boot-sunxi/board/sunxi/dram_a10_olinuxino_l.c
---- u-boot-2014.04/board/sunxi/dram_a10_olinuxino_l.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_a10_olinuxino_l.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 480,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 16,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_a13_oli_micro.c u-boot-sunxi/board/sunxi/dram_a13_oli_micro.c
---- u-boot-2014.04/board/sunxi/dram_a13_oli_micro.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_a13_oli_micro.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,32 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 408,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 16,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 256,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_a13_olinuxino.c u-boot-sunxi/board/sunxi/dram_a13_olinuxino.c
---- u-boot-2014.04/board/sunxi/dram_a13_olinuxino.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_a13_olinuxino.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 408,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 8,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l2.c u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l2.c
---- u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l2.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l2.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 480,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7f,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l.c u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l.c
---- u-boot-2014.04/board/sunxi/dram_a20_olinuxino_l.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_a20_olinuxino_l.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 480,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 0x7f,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_ainol_aw1.c u-boot-sunxi/board/sunxi/dram_ainol_aw1.c
---- u-boot-2014.04/board/sunxi/dram_ainol_aw1.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_ainol_aw1.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7b,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 1,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_auxtek_t003.c u-boot-sunxi/board/sunxi/dram_auxtek_t003.c
---- u-boot-2014.04/board/sunxi/dram_auxtek_t003.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_auxtek_t003.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 408,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_cubieboard.c u-boot-sunxi/board/sunxi/dram_cubieboard.c
---- u-boot-2014.04/board/sunxi/dram_cubieboard.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_cubieboard.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 480,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_cubietruck.c u-boot-sunxi/board/sunxi/dram_cubietruck.c
---- u-boot-2014.04/board/sunxi/dram_cubietruck.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_cubietruck.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7f,
-+	.odt_en = 0,
-+	.size = 2048,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0x0,
-+	.tpr4 = 0x1,
-+	.tpr5 = 0x0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0x0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_eu3000.c u-boot-sunxi/board/sunxi/dram_eu3000.c
---- u-boot-2014.04/board/sunxi/dram_eu3000.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_eu3000.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7b,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 1,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_forfun_q88db.c u-boot-sunxi/board/sunxi/dram_forfun_q88db.c
---- u-boot-2014.04/board/sunxi/dram_forfun_q88db.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_forfun_q88db.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 384,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 0x7b,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_gooseberry_a721.c u-boot-sunxi/board/sunxi/dram_gooseberry_a721.c
---- u-boot-2014.04/board/sunxi/dram_gooseberry_a721.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_gooseberry_a721.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 360,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 1024,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_h6.c u-boot-sunxi/board/sunxi/dram_h6.c
---- u-boot-2014.04/board/sunxi/dram_h6.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_h6.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 360,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_hackberry.c u-boot-sunxi/board/sunxi/dram_hackberry.c
---- u-boot-2014.04/board/sunxi/dram_hackberry.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_hackberry.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 408,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 1,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_icou_fatty_i.c u-boot-sunxi/board/sunxi/dram_icou_fatty_i.c
---- u-boot-2014.04/board/sunxi/dram_icou_fatty_i.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_icou_fatty_i.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 384,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7f,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 1,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_inet_k70hc.c u-boot-sunxi/board/sunxi/dram_inet_k70hc.c
---- u-boot-2014.04/board/sunxi/dram_inet_k70hc.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_inet_k70hc.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 384,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x12331a7f,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 1,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_linksprite_pcduino3.c u-boot-sunxi/board/sunxi/dram_linksprite_pcduino3.c
---- u-boot-2014.04/board/sunxi/dram_linksprite_pcduino3.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_linksprite_pcduino3.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 480,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7a,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0x0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_megafeis_a08.c u-boot-sunxi/board/sunxi/dram_megafeis_a08.c
---- u-boot-2014.04/board/sunxi/dram_megafeis_a08.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_megafeis_a08.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_merrii_m2.c u-boot-sunxi/board/sunxi/dram_merrii_m2.c
---- u-boot-2014.04/board/sunxi/dram_merrii_m2.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_merrii_m2.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 127,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0x0,
-+	.tpr4 = 0x0,
-+	.tpr5 = 0x0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0x0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_mini_x_a10s.c u-boot-sunxi/board/sunxi/dram_mini_x_a10s.c
---- u-boot-2014.04/board/sunxi/dram_mini_x_a10s.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_mini_x_a10s.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_mk802_a10s.c u-boot-sunxi/board/sunxi/dram_mk802_a10s.c
---- u-boot-2014.04/board/sunxi/dram_mk802_a10s.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_mk802_a10s.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_mk802ii_a20.c u-boot-sunxi/board/sunxi/dram_mk802ii_a20.c
---- u-boot-2014.04/board/sunxi/dram_mk802ii_a20.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_mk802ii_a20.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 360,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7f,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_olimex_a13_som.c u-boot-sunxi/board/sunxi/dram_olimex_a13_som.c
---- u-boot-2014.04/board/sunxi/dram_olimex_a13_som.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_olimex_a13_som.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,32 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 408,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_pov_protab2.c u-boot-sunxi/board/sunxi/dram_pov_protab2.c
---- u-boot-2014.04/board/sunxi/dram_pov_protab2.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_pov_protab2.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_pov_protab2_xxl.c u-boot-sunxi/board/sunxi/dram_pov_protab2_xxl.c
---- u-boot-2014.04/board/sunxi/dram_pov_protab2_xxl.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_pov_protab2_xxl.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_pov_tab_p703.c u-boot-sunxi/board/sunxi/dram_pov_tab_p703.c
---- u-boot-2014.04/board/sunxi/dram_pov_tab_p703.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_pov_tab_p703.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 360,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 0x56b9697b,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_r7dongle.c u-boot-sunxi/board/sunxi/dram_r7dongle.c
---- u-boot-2014.04/board/sunxi/dram_r7dongle.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_r7dongle.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 384,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x04,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sanei_n90.c u-boot-sunxi/board/sunxi/dram_sanei_n90.c
---- u-boot-2014.04/board/sunxi/dram_sanei_n90.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sanei_n90.c	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,30 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 456,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 1,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_semitime_g2.c u-boot-sunxi/board/sunxi/dram_semitime_g2.c
---- u-boot-2014.04/board/sunxi/dram_semitime_g2.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_semitime_g2.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7b,
-+	.odt_en = 0,
-+	.size = 1024, /* in MiB */
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0x00,
-+	.tpr4 = 0x00,
-+	.tpr5 = 0x00,
-+	.emr1 = 0x00,
-+	.emr2 = 0x10,
-+	.emr3 = 0x00,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_312_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_312_1024_iow8.c
---- u-boot-2014.04/board/sunxi/dram_sun4i_312_1024_iow8.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun4i_312_1024_iow8.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 312,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow16.c
---- u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow16.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow16.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 360,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow8.c
---- u-boot-2014.04/board/sunxi/dram_sun4i_360_1024_iow8.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun4i_360_1024_iow8.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 360,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_360_512.c u-boot-sunxi/board/sunxi/dram_sun4i_360_512.c
---- u-boot-2014.04/board/sunxi/dram_sun4i_360_512.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun4i_360_512.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 360,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow16.c
---- u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow16.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow16.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 384,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow8.c
---- u-boot-2014.04/board/sunxi/dram_sun4i_384_1024_iow8.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun4i_384_1024_iow8.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 384,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow16.c
---- u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow16.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow16.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 408,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow8.c u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow8.c
---- u-boot-2014.04/board/sunxi/dram_sun4i_408_1024_iow8.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun4i_408_1024_iow8.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 408,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun4i_408_512.c u-boot-sunxi/board/sunxi/dram_sun4i_408_512.c
---- u-boot-2014.04/board/sunxi/dram_sun4i_408_512.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun4i_408_512.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 408,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 0x7b,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun5i_408_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun5i_408_1024_iow16.c
---- u-boot-2014.04/board/sunxi/dram_sun5i_408_1024_iow16.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun5i_408_1024_iow16.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 408,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7b,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun5i_408_512_busw16_iow8.c u-boot-sunxi/board/sunxi/dram_sun5i_408_512_busw16_iow8.c
---- u-boot-2014.04/board/sunxi/dram_sun5i_408_512_busw16_iow8.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun5i_408_512_busw16_iow8.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 408,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 8,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 123,
-+	.odt_en = 1,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun5i_432_512_busw16_iow16.c u-boot-sunxi/board/sunxi/dram_sun5i_432_512_busw16_iow16.c
---- u-boot-2014.04/board/sunxi/dram_sun5i_432_512_busw16_iow16.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun5i_432_512_busw16_iow16.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_360_512_busw16_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_360_512_busw16_iow16.c
---- u-boot-2014.04/board/sunxi/dram_sun7i_360_512_busw16_iow16.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun7i_360_512_busw16_iow16.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 360,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 0x7f,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_384_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_384_1024_iow16.c
---- u-boot-2014.04/board/sunxi/dram_sun7i_384_1024_iow16.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun7i_384_1024_iow16.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 384,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7f,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_384_512_busw16_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_384_512_busw16_iow16.c
---- u-boot-2014.04/board/sunxi/dram_sun7i_384_512_busw16_iow16.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun7i_384_512_busw16_iow16.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 384,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 0x7f,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_432_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_432_1024_iow16.c
---- u-boot-2014.04/board/sunxi/dram_sun7i_432_1024_iow16.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun7i_432_1024_iow16.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7f,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 1,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_sun7i_460_1024_iow16.c u-boot-sunxi/board/sunxi/dram_sun7i_460_1024_iow16.c
---- u-boot-2014.04/board/sunxi/dram_sun7i_460_1024_iow16.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_sun7i_460_1024_iow16.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 480,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7f,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0x0,
-+	.tpr4 = 0x1,
-+	.tpr5 = 0x0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0x0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_wexler_tab_7200.c u-boot-sunxi/board/sunxi/dram_wexler_tab_7200.c
---- u-boot-2014.04/board/sunxi/dram_wexler_tab_7200.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_wexler_tab_7200.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include "common.h"
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 384,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 0x7f,
-+	.odt_en = 1,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 1,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_wobo_i5.c u-boot-sunxi/board/sunxi/dram_wobo_i5.c
---- u-boot-2014.04/board/sunxi/dram_wobo_i5.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_wobo_i5.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 9,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x04,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_xzpad700.c u-boot-sunxi/board/sunxi/dram_xzpad700.c
---- u-boot-2014.04/board/sunxi/dram_xzpad700.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_xzpad700.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 408,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 4096,
-+	.io_width = 16,
-+	.bus_width = 16,
-+	.cas = 9,
-+	.zq = 0x56b9487b,
-+	.odt_en = 0,
-+	.size = 512,
-+	.tpr0 = 0x42d899b7,
-+	.tpr1 = 0xa090,
-+	.tpr2 = 0x22a00,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0x10,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/dram_zatab.c u-boot-sunxi/board/sunxi/dram_zatab.c
---- u-boot-2014.04/board/sunxi/dram_zatab.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/dram_zatab.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,31 @@
-+/* this file is generated, don't edit it yourself */
-+
-+#include <common.h>
-+#include <asm/arch/dram.h>
-+
-+static struct dram_para dram_para = {
-+	.clock = 432,
-+	.type = 3,
-+	.rank_num = 1,
-+	.density = 2048,
-+	.io_width = 8,
-+	.bus_width = 32,
-+	.cas = 6,
-+	.zq = 123,
-+	.odt_en = 0,
-+	.size = 1024,
-+	.tpr0 = 0x30926692,
-+	.tpr1 = 0x1090,
-+	.tpr2 = 0x1a0c8,
-+	.tpr3 = 0,
-+	.tpr4 = 0,
-+	.tpr5 = 0,
-+	.emr1 = 0x4,
-+	.emr2 = 0,
-+	.emr3 = 0,
-+};
-+
-+unsigned long sunxi_dram_init(void)
-+{
-+	return dramc_init(&dram_para);
-+}
-diff -ruN u-boot-2014.04/board/sunxi/gmac.c u-boot-sunxi/board/sunxi/gmac.c
---- u-boot-2014.04/board/sunxi/gmac.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/gmac.c	2014-09-06 16:58:36.165953115 +0200
-@@ -0,0 +1,43 @@
-+#include <common.h>
-+#include <netdev.h>
-+#include <miiphy.h>
-+#include <asm/gpio.h>
-+#include <asm/io.h>
-+#include <asm/arch/clock.h>
-+#include <asm/arch/gpio.h>
-+
-+int sunxi_gmac_initialize(bd_t *bis)
-+{
-+	int pin;
-+	struct sunxi_ccm_reg *const ccm =
-+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+	/* Set up clock gating */
-+	setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC);
-+
-+	/* Set MII clock */
-+#ifdef CONFIG_RGMII
-+	setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
-+		CCM_GMAC_CTRL_GPIT_RGMII);
-+#else
-+	setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII |
-+		CCM_GMAC_CTRL_GPIT_MII);
-+#endif
-+
-+	/* Configure pin mux settings for GMAC */
-+	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) {
-+#ifdef CONFIG_RGMII
-+		/* skip unused pins in RGMII mode */
-+		if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14))
-+			continue;
-+#endif
-+		sunxi_gpio_set_cfgpin(pin, SUN7I_GPA0_GMAC);
-+		sunxi_gpio_set_drv(pin, 3);
-+	}
-+
-+#ifdef CONFIG_RGMII
-+	return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII);
-+#else
-+	return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII);
-+#endif
-+}
-diff -ruN u-boot-2014.04/board/sunxi/Makefile u-boot-sunxi/board/sunxi/Makefile
---- u-boot-2014.04/board/sunxi/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/board/sunxi/Makefile	2014-09-06 16:58:36.161953116 +0200
-@@ -0,0 +1,95 @@
-+#
-+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
-+#
-+# Based on some other board Makefile
-+#
-+# (C) Copyright 2000-2003
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# SPDX-License-Identifier:	GPL-2.0+
-+#
-+obj-y	+= board.o
-+obj-$(CONFIG_SUNXI_GMAC)	+= gmac.o
-+obj-$(CONFIG_A10_MID_1GB)	+= dram_sun4i_360_1024_iow16.o
-+obj-$(CONFIG_A10_OLINUXINO_L)	+= dram_a10_olinuxino_l.o
-+obj-$(CONFIG_A10S_OLINUXINO_M)	+= dram_sun5i_432_512_busw16_iow16.o
-+obj-$(CONFIG_A13_OLINUXINO)	+= dram_a13_olinuxino.o
-+obj-$(CONFIG_A13_OLINUXINOM)	+= dram_a13_oli_micro.o
-+obj-$(CONFIG_A13_MID)		+= dram_sun5i_408_512_busw16_iow8.o
-+obj-$(CONFIG_A20_OLINUXINO_L)	+= dram_a20_olinuxino_l.o
-+obj-$(CONFIG_A20_OLINUXINO_L2)	+= dram_a20_olinuxino_l2.o
-+obj-$(CONFIG_A20_OLINUXINO_M)	+= dram_sun7i_384_1024_iow16.o
-+obj-$(CONFIG_A20_SOM)		+= dram_sun7i_384_1024_iow16.o
-+obj-$(CONFIG_AINOL_AW1)		+= dram_ainol_aw1.o
-+obj-$(CONFIG_AMPE_A76)		+= dram_sun5i_432_512_busw16_iow16.o
-+obj-$(CONFIG_AUXTEK_T003)	+= dram_auxtek_t003.o
-+obj-$(CONFIG_AUXTEK_T004)	+= dram_sun5i_432_512_busw16_iow16.o
-+obj-$(CONFIG_BA10_TV_BOX)	+= dram_sun4i_384_1024_iow8.o
-+obj-$(CONFIG_COBY_MID7042)	+= dram_sun4i_408_1024_iow16.o
-+obj-$(CONFIG_COBY_MID8042)	+= dram_sun4i_360_1024_iow16.o
-+obj-$(CONFIG_COBY_MID9742)	+= dram_sun4i_408_1024_iow16.o
-+obj-$(CONFIG_MARSBOARD_A10)	+= dram_sun4i_360_1024_iow16.o
-+obj-$(CONFIG_MARSBOARD_A20)	+= dram_sun4i_360_1024_iow16.o
-+obj-$(CONFIG_CUBIEBOARD)	+= dram_cubieboard.o
-+obj-$(CONFIG_CUBIEBOARD2)	+= dram_sun7i_460_1024_iow16.o
-+obj-$(CONFIG_BANANAPI)		+= dram_sun7i_432_1024_iow16.o
-+obj-$(CONFIG_CUBIETRUCK)	+= dram_cubietruck.o
-+obj-$(CONFIG_DNS_M82)		+= dram_sun4i_360_1024_iow16.o
-+obj-$(CONFIG_EOMA68_A10)	+= dram_sun4i_360_1024_iow8.o
-+obj-$(CONFIG_EOMA68_A20)	+= dram_sun7i_384_1024_iow16.o
-+obj-$(CONFIG_EU3000)		+= dram_eu3000.o
-+obj-$(CONFIG_FORFUN_Q88DB)	+= dram_forfun_q88db.o
-+obj-$(CONFIG_GOOSEBERRY_A721)	+= dram_gooseberry_a721.o
-+obj-$(CONFIG_H6)		+= dram_h6.o
-+obj-$(CONFIG_HACKBERRY)		+= dram_hackberry.o
-+obj-$(CONFIG_HBD_MID_S906)	+= dram_sun7i_432_1024_iow16.o
-+obj-$(CONFIG_HCORE_HC860)	+= dram_sun4i_384_1024_iow16.o
-+obj-$(CONFIG_HYUNDAI_A7)	+= dram_sun4i_360_512.o
-+obj-$(CONFIG_A7HD)		+= dram_sun4i_360_1024_iow8.o
-+obj-$(CONFIG_I12_TVBOX)		+= dram_sun7i_384_1024_iow16.o
-+obj-$(CONFIG_ICOU_FATTY_I)	+= dram_icou_fatty_i.o
-+obj-$(CONFIG_INTERRA3)		+= dram_mk802ii_a20.o
-+obj-$(CONFIG_INET_86VZ)		+= dram_sun5i_432_512_busw16_iow16.o
-+obj-$(CONFIG_INET97F_II)	+= dram_sun4i_408_512.o
-+obj-$(CONFIG_INET_K70HC)	+= dram_inet_k70hc.o
-+obj-$(CONFIG_ITEADA10)		+= dram_cubieboard.o
-+obj-$(CONFIG_ITEADA20)		+= dram_sun7i_460_1024_iow16.o
-+obj-$(CONFIG_JESURUN_Q5)	+= dram_sun4i_312_1024_iow8.o
-+obj-$(CONFIG_K1001L1C)		+= dram_sun7i_384_1024_iow16.o
-+obj-$(CONFIG_KURIO_7S)		+= dram_sun7i_432_1024_iow16.o
-+obj-$(CONFIG_LANGCENT_H6S)	+= dram_sun7i_360_512_busw16_iow16.o
-+obj-$(CONFIG_LINKSPRITE_PCDUINO3)	+= dram_linksprite_pcduino3.o
-+obj-$(CONFIG_MEFAFEIS_A08)	+= dram_megafeis_a08.o
-+obj-$(CONFIG_MELE_A1000)	+= dram_sun4i_360_512.o
-+obj-$(CONFIG_MELE_A1000G)	+= dram_sun4i_360_1024_iow8.o
-+obj-$(CONFIG_MELE_A3700)	+= dram_sun4i_360_1024_iow8.o
-+obj-$(CONFIG_MERRII_HUMMINGBIRD_A20)	+= dram_sun7i_460_1024_iow16.o
-+obj-$(CONFIG_MINI_X)		+= dram_sun4i_360_512.o
-+obj-$(CONFIG_MINI_X_1GB)	+= dram_sun4i_360_1024_iow16.o
-+obj-$(CONFIG_MINI_X_A10S)	+= dram_mini_x_a10s.o
-+obj-$(CONFIG_MK802)		+= dram_sun4i_360_512.o
-+obj-$(CONFIG_MK802_1GB)		+= dram_sun4i_360_1024_iow16.o
-+obj-$(CONFIG_MK802_A10S)	+= dram_mk802_a10s.o
-+obj-$(CONFIG_MK802II)		+= dram_sun4i_408_1024_iow8.o
-+obj-$(CONFIG_MK802II_A20)	+= dram_mk802ii_a20.o
-+obj-$(CONFIG_MK808C_A20)	+= dram_sun7i_384_1024_iow16.o
-+obj-$(CONFIG_OLIMEX_A13_SOM)	+= dram_olimex_a13_som.o
-+obj-$(CONFIG_PCDUINO)		+= dram_sun4i_408_1024_iow8.o
-+obj-$(CONFIG_PENGPOD700)	+= dram_sun4i_384_1024_iow8.o
-+obj-$(CONFIG_PENGPOD1000)	+= dram_sun4i_408_1024_iow16.o
-+obj-$(CONFIG_PINERIVER-H25)	+= dram_sun5i_408_1024_iow16.o
-+obj-$(CONFIG_POV_TAB_P703)	+= dram_pov_tab_p703.o
-+obj-$(CONFIG_POV_PROTAB2)	+= dram_pov_protab2.o
-+obj-$(CONFIG_POV_PROTAB2_XXL)	+= dram_pov_protab2_xxl.o
-+obj-$(CONFIG_QT840A)		+= dram_sun7i_384_512_busw16_iow16.o
-+obj-$(CONFIG_R7DONGLE)		+= dram_r7dongle.o
-+obj-$(CONFIG_SANEI_N90)		+= dram_sanei_n90.o
-+obj-$(CONFIG_SEMITIME_G2)	+= dram_semitime_g2.o
-+obj-$(CONFIG_TZX_Q8_713B6)	+= dram_sun5i_408_512_busw16_iow8.o
-+obj-$(CONFIG_TZX_Q8_713B7)	+= dram_sun5i_408_512_busw16_iow8.o
-+obj-$(CONFIG_UHOST_U1A)		+= dram_sun4i_360_1024_iow8.o
-+obj-$(CONFIG_WEXLER_TAB_7200)	+= dram_wexler_tab_7200.o
-+obj-$(CONFIG_WOBO_I5)		+= dram_wobo_i5.o
-+obj-$(CONFIG_XZPAD700)		+= dram_xzpad700.o
-+obj-$(CONFIG_ZATAB)		+= dram_zatab.o
-+obj-$(CONFIG_MERRII_M2)		+= dram_merrii_m2.o
-diff -ruN u-boot-2014.04/boards.cfg u-boot-sunxi/boards.cfg
---- u-boot-2014.04/boards.cfg	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/boards.cfg	2014-09-06 16:58:36.185953115 +0200
-@@ -371,6 +371,111 @@
- Active  arm         armv7          s5pc1xx     samsung         goni                s5p_goni                             -                                                                                                                                 Mateusz Zalega <m.zalega@samsung.com>
- Active  arm         armv7          s5pc1xx     samsung         smdkc100            smdkc100                             -                                                                                                                                 Minkyu Kang <mk7.kang@samsung.com>
- Active  arm         armv7          socfpga     altera          socfpga             socfpga_cyclone5                     -                                                                                                                                 -
-+Active  arm         armv7          sunxi       -               sunxi               A10_MID_1GB                          sun4i:A10_MID_1GB,SPL                                                                                                             -
-+Active  arm         armv7          sunxi       -               sunxi               A10-OLinuXino-Lime                   sun4i:A10_OLINUXINO_L,STATUSLED=226,SPL,SUNXI_EMAC                                                                                -
-+Active  arm         armv7          sunxi       -               sunxi               A10s-OLinuXino-M                     sun5i:A10S_OLINUXINO_M,STATUSLED=131,AXP152_POWER,CONS_INDEX=1,SPL,SUNXI_EMAC                                                     -
-+Active  arm         armv7          sunxi       -               sunxi               A10s-OLinuXino-M_FEL                 sun5i:A10S_OLINUXINO_M,STATUSLED=131,AXP152_POWER,CONS_INDEX=1,SPL_FEL,SUNXI_EMAC                                                 -
-+Active  arm         armv7          sunxi       -               sunxi               A13-OLinuXino                        sun5i:A13_OLINUXINO,SPL,STATUSLED=201,CONS_INDEX=2                                                                                -
-+Active  arm         armv7          sunxi       -               sunxi               A13-OLinuXino_FEL                    sun5i:A13_OLINUXINO,SPL_FEL,STATUSLED=201,CONS_INDEX=2                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               A13-OLinuXino_FEL_sdcon              sun5i:A13_OLINUXINO,SPL_FEL,STATUSLED=201,UART0_PORT_F                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               A13-OLinuXinoM                       sun5i:A13_OLINUXINOM,SPL,NO_AXP,STATUSLED=201,CONS_INDEX=2                                                                        -
-+Active  arm         armv7          sunxi       -               sunxi               A13-OLinuXinoM_FEL                   sun5i:A13_OLINUXINOM,SPL_FEL,NO_AXP,STATUSLED=201,CONS_INDEX=2                                                                    -
-+Active  arm         armv7          sunxi       -               sunxi               A13_MID                              sun5i:A13_MID,SPL,CONS_INDEX=2                                                                                                    -
-+Active  arm         armv7          sunxi       -               sunxi               A20-OLinuXino_Lime                   sun7i:A20_OLINUXINO_L,CONS_INDEX=1,STATUSLED=226,SPL,SUNXI_EMAC                                                                   -
-+Active  arm         armv7          sunxi       -               sunxi               A20-OLinuXino_Lime2                  sun7i:A20_OLINUXINO_L2,CONS_INDEX=1,STATUSLED=226,SPL,SUNXI_GMAC                                                                  -
-+Active  arm         armv7          sunxi       -               sunxi               A20-OLinuXino_MICRO                  sun7i:A20_OLINUXINO_M,CONS_INDEX=1,STATUSLED=226,SPL,SUNXI_EMAC                                                                   -
-+Active  arm         armv7          sunxi       -               sunxi               A20-OLinuXino_MICRO_FEL              sun7i:A20_OLINUXINO_M,CONS_INDEX=1,STATUSLED=226,SPL_FEL,SUNXI_EMAC                                                               -
-+Active  arm         armv7          sunxi       -               sunxi               A20-SOM                              sun7i:A20_SOM,SPL,SUNXI_GMAC,RGMII,STATUSLED1=245,FAST_MBUS                                                                       -
-+Active  arm         armv7          sunxi       -               sunxi               Ainol_AW1                            sun7i:AINOL_AW1,SPL                                                                                                               -
-+Active  arm         armv7          sunxi       -               sunxi               Ampe_A76                             sun5i:AMPE_A76,SPL,CONS_INDEX=2                                                                                                   -
-+Active  arm         armv7          sunxi       -               sunxi               Auxtek-T003                          sun5i:AUXTEK_T003,SPL,AXP152_POWER,STATUSLED=34                                                                                   -
-+Active  arm         armv7          sunxi       -               sunxi               Auxtek-T004                          sun5i:AUXTEK_T004,SPL,AXP152_POWER,STATUSLED=34                                                                                   -
-+Active  arm         armv7          sunxi       -               sunxi               ba10_tv_box                          sun4i:BA10_TV_BOX,SPL,SUNXI_EMAC                                                                                                  -
-+Active  arm         armv7          sunxi       -               sunxi               Bananapi                             sun7i:BANANAPI,SPL,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),STATUSLED=244,STATUSLED1=245,FAST_MBUS                                   -
-+Active  arm         armv7          sunxi       -               sunxi               Bananapi_FEL                         sun7i:BANANAPI,SPL_FEL,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),STATUSLED=244,STATUSLED1=245,FAST_MBUS                               -
-+Active  arm         armv7          sunxi       -               sunxi               Coby_MID7042                         sun4i:COBY_MID7042,SPL                                                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               Coby_MID8042                         sun4i:COBY_MID8042,SPL                                                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               Coby_MID9742                         sun4i:COBY_MID9742,SPL                                                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               Iteaduino_Plus_A10                   sun4i:ITEADA10,SPL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245                                                                        -
-+Active  arm         armv7          sunxi       -               sunxi               Iteaduino_Plus_A20                   sun7i:ITEADA20,SPL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245                                                                        -
-+Active  arm         armv7          sunxi       -               sunxi               Colombus                             sun6i:COLOMBUS,AXP221_POWER,ENABLE_DLDO1_POWER                                                                                    -
-+Active  arm         armv7          sunxi       -               sunxi               Ippo_q8h                             sun8i:IPPO_Q8H,NO_AXP,CONS_INDEX=5                                                                                                -
-+Active  arm         armv7          sunxi       -               sunxi               Cubieboard                           sun4i:CUBIEBOARD,SPL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245                                                                      -
-+Active  arm         armv7          sunxi       -               sunxi               Cubieboard2                          sun7i:CUBIEBOARD2,SPL,SUNXI_GMAC,STATUSLED=244,STATUSLED1=245,FAST_MBUS                                                           -
-+Active  arm         armv7          sunxi       -               sunxi               Cubieboard2_FEL                      sun7i:CUBIEBOARD2,SPL_FEL,SUNXI_GMAC,STATUSLED=244,STATUSLED1=245,FAST_MBUS                                                       -
-+Active  arm         armv7          sunxi       -               sunxi               Cubietruck                           sun7i:CUBIETRUCK,SPL,SUNXI_GMAC,RGMII,STATUSLED=245,STATUSLED1=244,STATUSLED2=235,STATUSLED3=231,FAST_MBUS                        -
-+Active  arm         armv7          sunxi       -               sunxi               Cubietruck_FEL                       sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII,STATUSLED=245,STATUSLED1=244,STATUSLED2=235,STATUSLED3=231,FAST_MBUS                    -
-+Active  arm         armv7          sunxi       -               sunxi               Cubieboard_FEL                       sun4i:CUBIEBOARD,SPL_FEL,SUNXI_EMAC,STATUSLED=244,STATUSLED1=245                                                                  -
-+Active  arm         armv7          sunxi       -               sunxi               DNS_M82                              sun4i:DNS_M82,SPL                                                                                                                 -
-+Active  arm         armv7          sunxi       -               sunxi               EOMA68_A10                           sun4i:EOMA68_A10,SPL,MMC_SUNXI_SLOT=3,SUNXI_EMAC                                                                                  -
-+Active  arm         armv7          sunxi       -               sunxi               EOMA68_A10_FEL                       sun4i:EOMA68_A10,SPL_FEL,MMC_SUNXI_SLOT=3,SUNXI_EMAC                                                                              -
-+Active  arm         armv7          sunxi       -               sunxi               EOMA68_A20                           sun7i:EOMA68_A20,SPL,MMC_SUNXI_SLOT=3,SUNXI_EMAC                                                                                  -
-+Active  arm         armv7          sunxi       -               sunxi               EOMA68_A20_FEL                       sun7i:EOMA68_A20,SPL_FEL,MMC_SUNXI_SLOT=3,SUNXI_EMAC                                                                              -
-+Active  arm         armv7          sunxi       -               sunxi               EU3000                               sun7i:EU3000,SPL                                                                                                                  -
-+Active  arm         armv7          sunxi       -               sunxi               Forfun_Q88DB                         sun7i:FORFUN_Q88DB,SPL                                                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               Gooseberry_A721                      sun4i:GOOSEBERRY_A721,SPL                                                                                                         -
-+Active  arm         armv7          sunxi       -               sunxi               H6                                   sun4i:H6,SPL                                                                                                                      -
-+Active  arm         armv7          sunxi       -               sunxi               Hackberry                            sun4i:HACKBERRY,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(19)                                                                               -
-+Active  arm         armv7          sunxi       -               sunxi               HBD_MID_S906                         sun7i:HBD_MID_S906,SPL                                                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               HCore_HC860                          sun4i:HCORE_HC860,SPL                                                                                                             -
-+Active  arm         armv7          sunxi       -               sunxi               Hyundai_A7                           sun4i:HYUNDAI_A7,SPL                                                                                                              -
-+Active  arm         armv7          sunxi       -               sunxi               Hyundai_A7HD                         sun4i:A7HD,SPL                                                                                                                    -
-+Active  arm         armv7          sunxi       -               sunxi               i12-tvbox                            sun7i:I12_TVBOX,SPL,FAST_MBUS,STATUSLED=244                                                                                       -
-+Active  arm         armv7          sunxi       -               sunxi               ICOU_Fatty_I                         sun7i:ICOU_FATTY_I,SPL                                                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               Interra-3                            sun7i:INTERRA3,SPL,SUNXI_GMAC,FAST_MBUS,MMC_SUNXI_SLOT=2                                                                          -
-+Active  arm         armv7          sunxi       -               sunxi               INet_86VZ                            sun5i:INET_86VZ,SPL														  -
-+Active  arm         armv7          sunxi       -               sunxi               INet_86VZ_FEL                        sun5i:INET_86VZ,SPL_FEL,UART0_PORT_F                                                                                              -
-+Active  arm         armv7          sunxi       -               sunxi               INet97F-II                           sun4i:INET97F_II,SPL                                                                                                              -
-+Active  arm         armv7          sunxi       -               sunxi               INet_K70HC                           sun7i:INET_K70HC,SPL                                                                                                              -
-+Active  arm         armv7          sunxi       -               sunxi               Jesurun-Q5                           sun4i:JESURUN_Q5,SPL,SUNXI_EMAC,STATUSLED=244                                                                                     -
-+Active  arm         armv7          sunxi       -               sunxi               K1001L1C                             sun7i:K1001L1C,SPL                                                                                                                -
-+Active  arm         armv7          sunxi       -               sunxi               Kurio_7S                             sun7i:KURIO_7S,SPL                                                                                                                -
-+Active  arm         armv7          sunxi       -               sunxi               Langcent_H6S                         sun7i:LANGCENT_H6S,SPL                                                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               Linksprite_pcDuino3                  sun7i:LINKSPRITE_PCDUINO3,SPL,SUNXI_GMAC,FAST_MBUS                                                                                -
-+Active  arm         armv7          sunxi       -               sunxi               Marsboard_A10                        sun4i:MARSBOARD_A10,SPL,SUNXI_EMAC,NO_AXP                                                                                         -
-+Active  arm         armv7          sunxi       -               sunxi               Marsboard_A20                        sun7i:MARSBOARD_A20,SPL,SUNXI_EMAC,NO_AXP                                                                                         -
-+Active  arm         armv7          sunxi       -               sunxi               Marsboard_A20_debug                  sun7i:MARSBOARD_A20,SPL,SUNXI_EMAC,NO_AXP,SYS_SECONDARY_ON                                                                        -
-+Active  arm         armv7          sunxi       -               sunxi               Megafeis_A08                         sun5i:MEFAFEIS_A08,SPL                                                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               Mele_A1000                           sun4i:MELE_A1000,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234                                                                -
-+Active  arm         armv7          sunxi       -               sunxi               Mele_A1000_FEL                       sun4i:MELE_A1000,SPL_FEL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               Mele_A1000G                          sun4i:MELE_A1000G,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234                                                               -
-+Active  arm         armv7          sunxi       -               sunxi               Mele_A3700                           sun4i:MELE_A3700,SPL,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),STATUSLED=234                                                                -
-+Active  arm         armv7          sunxi       -               sunxi               Merrii_Hummingbird_A20               sun7i:MERRII_HUMMINGBIRD_A20,SPL                                                                                                  -
-+Active  arm         armv7          sunxi       -               sunxi               merrii_m2                            sun7i:MERRII_M2,SPL,SUNXI_EMAC                                                                                                    -
-+Active  arm         armv7          sunxi       -               sunxi               Mini-X                               sun4i:MINI_X,SPL                                                                                                                  -
-+Active  arm         armv7          sunxi       -               sunxi               Mini-X-1Gb                           sun4i:MINI_X_1GB,SPL                                                                                                              -
-+Active  arm         armv7          sunxi       -               sunxi               Mini-X_A10s                          sun5i:MINI_X_A10S,SPL                                                                                                             -
-+Active  arm         armv7          sunxi       -               sunxi               mk802                                sun4i:MK802,SPL,NO_AXP                                                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               mk802-1gb                            sun4i:MK802_1GB,SPL,NO_AXP                                                                                                        -
-+Active  arm         armv7          sunxi       -               sunxi               mk802_a10s                           sun5i:MK802_A10S,SPL,AXP152_POWER,STATUSLED=34                                                                                    -
-+Active  arm         armv7          sunxi       -               sunxi               mk802ii_A20                          sun7i:MK802II_A20,SPL                                                                                                             -
-+Active  arm         armv7          sunxi       -               sunxi               mk802ii                              sun4i:MK802II,SPL                                                                                                                 -
-+Active  arm         armv7          sunxi       -               sunxi               mk808c_A20                           sun7i:MK808C_A20,SPL                                                                                                              -
-+Active  arm         armv7          sunxi       -               sunxi               OLIMEX-A13-SOM                       sun5i:OLIMEX_A13_SOM,SPL,NO_AXP,STATUSLED=201,CONS_INDEX=2                                                                        -
-+Active  arm         armv7          sunxi       -               sunxi               pcDuino                              sun4i:PCDUINO,SPL,SUNXI_EMAC                                                                                                      -
-+Active  arm         armv7          sunxi       -               sunxi               pengpod1000                          sun4i:PENGPOD1000,SPL                                                                                                             -
-+Active  arm         armv7          sunxi       -               sunxi               pengpod700                           sun4i:PENGPOD700,SPL                                                                                                              -
-+Active	arm         armv7          suxni       -               sunxi               pineriver-h25                        sun5i:PINERIVER-H25,SPL
-+Active  arm         armv7          sunxi       -               sunxi               POV_TAB_P703                         sun5i:POV_TAB_P703,SPL                                                                                                            -
-+Active  arm         armv7          sunxi       -               sunxi               PoV_ProTab2_IPS9                     sun4i:POV_PROTAB2,SPL                                                                                                             -
-+Active  arm         armv7          sunxi       -               sunxi               PoV_ProTab2_IPS_3g                   sun4i:POV_PROTAB2,SPL                                                                                                             -
-+Active  arm         armv7          sunxi       -               sunxi               PoV_ProTab2_XXL                      sun4i:POV_PROTAB2_XXL,SPL                                                                                                         -
-+Active  arm         armv7          sunxi       -               sunxi               qt840a                               sun7i:QT840A,SPL,FAST_MBUS,STATUSLED=244                                                                                          -
-+Active  arm         armv7          sunxi       -               sunxi               r7-tv-dongle                         sun5i:R7DONGLE,SPL,AXP152_POWER,STATUSLED=34                                                                                      -
-+Active  arm         armv7          sunxi       -               sunxi               Sanei_N90                            sun4i:SANEI_N90,SPL                                                                                                               -
-+Active  arm         armv7          sunxi       -               sunxi               Semitime_G2                          sun5i:SEMITIME_G2,SPL,AXP152_POWER,STATUSLED=34                                                                                   -
-+Active  arm         armv7          sunxi       -               sunxi               sun4i                                sun4i:SUNXI_EMAC                                                                                                                  -
-+Active  arm         armv7          sunxi       -               sunxi               sun4i_sdcon                          sun4i:UART0_PORT_F,SUNXI_EMAC                                                                                                     -
-+Active  arm         armv7          sunxi       -               sunxi               sun5i                                sun5i:SUNXI_EMAC                                                                                                                  -
-+Active  arm         armv7          sunxi       -               sunxi               sun5i_sdcon                          sun5i:UART0_PORT_F,SUNXI_EMAC                                                                                                     -
-+Active  arm         armv7          sunxi       -               sunxi               sun5i_uart1                          sun5i:CONS_INDEX=2,SUNXI_EMAC                                                                                                     -
-+Active  arm         armv7          sunxi       -               sunxi               TZX-Q8-713B6                         sun5i:TZX_Q8_713B6,SPL,CONS_INDEX=2                                                                                               -
-+Active  arm         armv7          sunxi       -               sunxi               TZX-Q8-713B7                         sun5i:TZX_Q8_713B7,SPL,CONS_INDEX=2                                                                                               -
-+Active  arm         armv7          sunxi       -               sunxi               uhost_u1a                            sun4i:UHOST_U1A,SPL,STATUSLED=34                                                                                                  -
-+Active  arm         armv7          sunxi       -               sunxi               Wexler_TAB_7200                      sun7i:WEXLER_TAB_7200,SPL                                                                                                         -
-+Active  arm         armv7          sunxi       -               sunxi               wobo-i5                              sun5i:WOBO_I5,SPL,STATUSLED=34                                                                                                    -
-+Active  arm         armv7          sunxi       -               sunxi               xzpad700                             sun5i:XZPAD700,SPL                                                                                                                -
-+Active  arm         armv7          sunxi       -               sunxi               zatab                                sun4i:ZATAB,SPL                                                                                                                   -
- Active  arm         armv7          u8500       st-ericsson     snowball            snowball                             -                                                                                                                                 Mathieu Poirier <mathieu.poirier@linaro.org>
- Active  arm         armv7          u8500       st-ericsson     u8500               u8500_href                           -                                                                                                                                 -
- Active  arm         armv7          vf610       freescale       vf610twr            vf610twr                             vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg                                                                         Alison Wang <b18965@freescale.com>
-diff -ruN u-boot-2014.04/common/spl/spl_mmc.c u-boot-sunxi/common/spl/spl_mmc.c
---- u-boot-2014.04/common/spl/spl_mmc.c	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/common/spl/spl_mmc.c	2014-09-06 16:58:36.205953114 +0200
-@@ -29,8 +29,10 @@
- 	if (err == 0)
- 		goto end;
- 
--	if (image_get_magic(header) != IH_MAGIC)
-+	if (image_get_magic(header) != IH_MAGIC) {
-+		printf("spl: not an uImage at %lu\n", sector);
- 		return -1;
-+	}
- 
- 	spl_parse_image_header(header);
- 
-diff -ruN u-boot-2014.04/drivers/gpio/Makefile u-boot-sunxi/drivers/gpio/Makefile
---- u-boot-2014.04/drivers/gpio/Makefile	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/drivers/gpio/Makefile	2014-09-06 16:58:36.253953113 +0200
-@@ -34,3 +34,4 @@
- obj-$(CONFIG_ADI_GPIO2)	+= adi_gpio2.o
- obj-$(CONFIG_TCA642X)		+= tca642x.o
- oby-$(CONFIG_SX151X)		+= sx151x.o
-+obj-$(CONFIG_SUNXI_GPIO)	+= sunxi_gpio.o
-diff -ruN u-boot-2014.04/drivers/gpio/sunxi_gpio.c u-boot-sunxi/drivers/gpio/sunxi_gpio.c
---- u-boot-2014.04/drivers/gpio/sunxi_gpio.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/drivers/gpio/sunxi_gpio.c	2014-09-06 16:58:36.253953113 +0200
-@@ -0,0 +1,102 @@
-+/*
-+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * Based on earlier arch/arm/cpu/armv7/sunxi/gpio.c:
-+ *
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/gpio.h>
-+
-+static int sunxi_gpio_output(u32 pin, u32 val)
-+{
-+	u32 dat;
-+	u32 bank = GPIO_BANK(pin);
-+	u32 num = GPIO_NUM(pin);
-+	struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
-+
-+	dat = readl(&pio->dat);
-+	if (val)
-+		dat |= 0x1 << num;
-+	else
-+		dat &= ~(0x1 << num);
-+
-+	writel(dat, &pio->dat);
-+
-+	return 0;
-+}
-+
-+static int sunxi_gpio_input(u32 pin)
-+{
-+	u32 dat;
-+	u32 bank = GPIO_BANK(pin);
-+	u32 num = GPIO_NUM(pin);
-+	struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
-+
-+	dat = readl(&pio->dat);
-+	dat >>= num;
-+
-+	return dat & 0x1;
-+}
-+
-+int gpio_request(unsigned gpio, const char *label)
-+{
-+	return 0;
-+}
-+
-+int gpio_free(unsigned gpio)
-+{
-+	return 0;
-+}
-+
-+int gpio_direction_input(unsigned gpio)
-+{
-+	sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_INPUT);
-+
-+	return sunxi_gpio_input(gpio);
-+}
-+
-+int gpio_direction_output(unsigned gpio, int value)
-+{
-+	sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_OUTPUT);
-+
-+	return sunxi_gpio_output(gpio, value);
-+}
-+
-+int gpio_get_value(unsigned gpio)
-+{
-+	return sunxi_gpio_input(gpio);
-+}
-+
-+int gpio_set_value(unsigned gpio, int value)
-+{
-+	return sunxi_gpio_output(gpio, value);
-+}
-+
-+int sunxi_name_to_gpio(const char *name)
-+{
-+	int group = 0;
-+	int groupsize = 9 * 32;
-+	long pin;
-+	char *eptr;
-+	if (*name == 'P' || *name == 'p')
-+		name++;
-+	if (*name >= 'A') {
-+		group = *name - (*name > 'a' ? 'a' : 'A');
-+		groupsize = 32;
-+		name++;
-+	}
-+
-+	pin = simple_strtol(name, &eptr, 10);
-+	if (!*name || *eptr)
-+		return -1;
-+	if (pin < 0 || pin > groupsize || group >= 9)
-+		return -1;
-+	return group * 32 + pin;
-+}
-diff -ruN u-boot-2014.04/drivers/i2c/Makefile u-boot-sunxi/drivers/i2c/Makefile
---- u-boot-2014.04/drivers/i2c/Makefile	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/drivers/i2c/Makefile	2014-09-06 16:58:36.265953112 +0200
-@@ -27,5 +27,6 @@
- obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o
- obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
- obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
-+obj-$(CONFIG_SYS_I2C_SUNXI) += mvtwsi.o
- obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
- obj-$(CONFIG_SYS_I2C_ZYNQ) += zynq_i2c.o
-diff -ruN u-boot-2014.04/drivers/i2c/mvtwsi.c u-boot-sunxi/drivers/i2c/mvtwsi.c
---- u-boot-2014.04/drivers/i2c/mvtwsi.c	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/drivers/i2c/mvtwsi.c	2014-09-06 16:58:36.265953112 +0200
-@@ -22,6 +22,8 @@
- #include <asm/arch/orion5x.h>
- #elif defined(CONFIG_KIRKWOOD)
- #include <asm/arch/kirkwood.h>
-+#elif defined(CONFIG_SUNXI)
-+#include <asm/arch/i2c.h>
- #else
- #error Driver mvtwsi not supported by SoC or board
- #endif
-@@ -30,6 +32,20 @@
-  * TWSI register structure
-  */
- 
-+#ifdef CONFIG_SUNXI
-+
-+struct  mvtwsi_registers {
-+	u32 slave_address;
-+	u32 xtnd_slave_addr;
-+	u32 data;
-+	u32 control;
-+	u32 status;
-+	u32 baudrate;
-+	u32 soft_reset;
-+};
-+
-+#else
-+
- struct  mvtwsi_registers {
- 	u32 slave_address;
- 	u32 data;
-@@ -43,6 +59,8 @@
- 	u32 soft_reset;
- };
- 
-+#endif
-+
- /*
-  * Control register fields
-  */
-@@ -216,21 +234,7 @@
-  */
- 
- #define TWSI_FREQUENCY(m, n) \
--	((u8) (CONFIG_SYS_TCLK / (10 * (m + 1) * 2 * (1 << n))))
--
--/*
-- * These are required to be reprogrammed before enabling the controller
-- * because a reset loses them.
-- * Default values come from the spec, but a twsi_reset will change them.
-- * twsi_slave_address left uninitialized lest checkpatch.pl complains.
-- */
--
--/* Baudrate generator: m (bits 7..4) =4, n (bits 3..0) =4 */
--static u8 twsi_baud_rate = 0x44; /* baudrate at controller reset */
--/* Default frequency corresponding to default m=4, n=4 */
--static u8 twsi_actual_speed = TWSI_FREQUENCY(4, 4);
--/* Default slave address is 0 (so is an uninitialized static) */
--static u8 twsi_slave_address;
-+	(CONFIG_SYS_TCLK / (10 * (m + 1) * (1 << n)))
- 
- /*
-  * Reset controller.
-@@ -238,7 +242,7 @@
-  * Controller reset also resets the baud rate and slave address, so
-  * re-establish them.
-  */
--static void twsi_reset(void)
-+static void twsi_reset(u8 baud_rate, u8 slave_address)
- {
- 	/* ensure controller will be enabled by any twsi*() function */
- 	twsi_control_flags = MVTWSI_CONTROL_TWSIEN;
-@@ -247,9 +251,9 @@
- 	/* wait 2 ms -- this is what the Marvell LSP does */
- 	udelay(20000);
- 	/* set baud rate */
--	writel(twsi_baud_rate, &twsi->baudrate);
-+	writel(baud_rate, &twsi->baudrate);
- 	/* set slave address even though we don't use it */
--	writel(twsi_slave_address, &twsi->slave_address);
-+	writel(slave_address, &twsi->slave_address);
- 	writel(0, &twsi->xtnd_slave_addr);
- 	/* assert STOP but don't care for the result */
- 	(void) twsi_stop(0);
-@@ -277,12 +281,8 @@
- 			}
- 		}
- 	}
--	/* save baud rate and slave for later calls to twsi_reset */
--	twsi_baud_rate = baud;
--	twsi_actual_speed = highest_speed;
--	twsi_slave_address = slaveadd;
- 	/* reset controller */
--	twsi_reset();
-+	twsi_reset(baud, slaveadd);
- }
- 
- /*
-diff -ruN u-boot-2014.04/drivers/mmc/Makefile u-boot-sunxi/drivers/mmc/Makefile
---- u-boot-2014.04/drivers/mmc/Makefile	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/drivers/mmc/Makefile	2014-09-06 16:58:36.281953112 +0200
-@@ -28,6 +28,7 @@
- obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
- obj-$(CONFIG_DWMMC) += dw_mmc.o
- obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
-+obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o
- obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
- obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
- ifdef CONFIG_SPL_BUILD
-diff -ruN u-boot-2014.04/drivers/mmc/sunxi_mmc.c u-boot-sunxi/drivers/mmc/sunxi_mmc.c
---- u-boot-2014.04/drivers/mmc/sunxi_mmc.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/drivers/mmc/sunxi_mmc.c	2014-09-06 16:58:36.281953112 +0200
-@@ -0,0 +1,385 @@
-+/*
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Aaron <leafy.myeh@allwinnertech.com>
-+ *
-+ * MMC driver for allwinner sunxi platform.
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <malloc.h>
-+#include <mmc.h>
-+#include <asm/io.h>
-+#include <asm/arch/clock.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/mmc.h>
-+
-+struct sunxi_mmc_host {
-+	unsigned mmc_no;
-+	uint32_t *mclkreg;
-+	unsigned database;
-+	unsigned fatal_err;
-+	unsigned mod_clk;
-+	struct sunxi_mmc *reg;
-+	struct mmc_config cfg;
-+};
-+
-+/* support 4 mmc hosts */
-+struct sunxi_mmc_host mmc_host[4];
-+
-+static int mmc_resource_init(int sdc_no)
-+{
-+	struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
-+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+	debug("init mmc %d resource\n", sdc_no);
-+
-+	switch (sdc_no) {
-+	case 0:
-+		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE;
-+		mmchost->mclkreg = &ccm->sd0_clk_cfg;
-+		break;
-+	case 1:
-+		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE;
-+		mmchost->mclkreg = &ccm->sd1_clk_cfg;
-+		break;
-+	case 2:
-+		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE;
-+		mmchost->mclkreg = &ccm->sd2_clk_cfg;
-+		break;
-+	case 3:
-+		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE;
-+		mmchost->mclkreg = &ccm->sd3_clk_cfg;
-+		break;
-+	default:
-+		printf("Wrong mmc number %d\n", sdc_no);
-+		return -1;
-+	}
-+#ifdef CONFIG_SUN6I
-+	mmchost->database = (unsigned int)mmchost->reg + 0x200;
-+#else
-+	mmchost->database = (unsigned int)mmchost->reg + 0x100;
-+#endif
-+	mmchost->mmc_no = sdc_no;
-+
-+	return 0;
-+}
-+
-+static int mmc_clk_io_on(int sdc_no)
-+{
-+	unsigned int pll_clk;
-+	unsigned int divider;
-+	struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
-+	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+
-+	debug("init mmc %d clock and io\n", sdc_no);
-+
-+	/* config ahb clock */
-+	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
-+
-+#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
-+	/* unassert reset */
-+	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
-+#endif
-+
-+	/* config mod clock */
-+	pll_clk = clock_get_pll6();
-+	/* should be close to 100 MHz but no more, so round up */
-+	divider = ((pll_clk + 99999999) / 100000000) - 1;
-+	writel(CCM_MMC_CTRL_ENABLE | CCM_MMC_CTRL_PLL6 | divider,
-+	       mmchost->mclkreg);
-+	mmchost->mod_clk = pll_clk / (divider + 1);
-+
-+	return 0;
-+}
-+
-+static int mmc_update_clk(struct mmc *mmc)
-+{
-+	struct sunxi_mmc_host *mmchost = mmc->priv;
-+	unsigned int cmd;
-+	unsigned timeout_msecs = 2000;
-+
-+	cmd = SUNXI_MMC_CMD_START |
-+	      SUNXI_MMC_CMD_UPCLK_ONLY |
-+	      SUNXI_MMC_CMD_WAIT_PRE_OVER;
-+	writel(cmd, &mmchost->reg->cmd);
-+	while (readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) {
-+		if (!timeout_msecs--)
-+			return -1;
-+		udelay(1000);
-+	}
-+
-+	/* clock update sets various irq status bits, clear these */
-+	writel(readl(&mmchost->reg->rint), &mmchost->reg->rint);
-+
-+	return 0;
-+}
-+
-+static int mmc_config_clock(struct mmc *mmc, unsigned div)
-+{
-+	struct sunxi_mmc_host *mmchost = mmc->priv;
-+	unsigned rval = readl(&mmchost->reg->clkcr);
-+
-+	/* Disable Clock */
-+	rval &= ~SUNXI_MMC_CLK_ENABLE;
-+	writel(rval, &mmchost->reg->clkcr);
-+	if (mmc_update_clk(mmc))
-+		return -1;
-+
-+	/* Change Divider Factor */
-+	rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
-+	rval |= div;
-+	writel(rval, &mmchost->reg->clkcr);
-+	if (mmc_update_clk(mmc))
-+		return -1;
-+	/* Re-enable Clock */
-+	rval |= SUNXI_MMC_CLK_ENABLE;
-+	writel(rval, &mmchost->reg->clkcr);
-+
-+	if (mmc_update_clk(mmc))
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static void mmc_set_ios(struct mmc *mmc)
-+{
-+	struct sunxi_mmc_host *mmchost = mmc->priv;
-+	unsigned int clkdiv = 0;
-+
-+	debug("set ios: bus_width: %x, clock: %d, mod_clk: %d\n",
-+	      mmc->bus_width, mmc->clock, mmchost->mod_clk);
-+
-+	/* Change clock first */
-+	clkdiv = (mmchost->mod_clk + (mmc->clock >> 1)) / mmc->clock / 2;
-+	if (mmc->clock) {
-+		if (mmc_config_clock(mmc, clkdiv)) {
-+			mmchost->fatal_err = 1;
-+			return;
-+		}
-+	}
-+
-+	/* Change bus width */
-+	if (mmc->bus_width == 8)
-+		writel(0x2, &mmchost->reg->width);
-+	else if (mmc->bus_width == 4)
-+		writel(0x1, &mmchost->reg->width);
-+	else
-+		writel(0x0, &mmchost->reg->width);
-+}
-+
-+static int mmc_core_init(struct mmc *mmc)
-+{
-+	struct sunxi_mmc_host *mmchost = mmc->priv;
-+
-+	/* Reset controller */
-+	writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
-+	udelay(1000);
-+
-+	return 0;
-+}
-+
-+static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data)
-+{
-+	struct sunxi_mmc_host *mmchost = mmc->priv;
-+	const int reading = !!(data->flags & MMC_DATA_READ);
-+	const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
-+					      SUNXI_MMC_STATUS_FIFO_FULL;
-+	unsigned i;
-+	unsigned byte_cnt = data->blocksize * data->blocks;
-+	unsigned timeout_msecs = 2000;
-+	unsigned *buff = (unsigned int *)(reading ? data->dest : data->src);
-+
-+	/* Always read / write data through the CPU */
-+	setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
-+
-+	for (i = 0; i < (byte_cnt >> 2); i++) {
-+		while (readl(&mmchost->reg->status) & status_bit) {
-+			if (!timeout_msecs--)
-+				return -1;
-+			udelay(1000);
-+		}
-+
-+		if (reading)
-+			buff[i] = readl(mmchost->database);
-+		else
-+			writel(buff[i], mmchost->database);
-+	}
-+
-+	return 0;
-+}
-+
-+static int mmc_rint_wait(struct mmc *mmc, unsigned int timeout_msecs,
-+			 unsigned int done_bit, const char *what)
-+{
-+	struct sunxi_mmc_host *mmchost = mmc->priv;
-+	unsigned int status;
-+
-+	do {
-+		status = readl(&mmchost->reg->rint);
-+		if (!timeout_msecs-- ||
-+		    (status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) {
-+			debug("%s timeout %x\n", what,
-+			      status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT);
-+			return TIMEOUT;
-+		}
-+		udelay(1000);
-+	} while (!(status & done_bit));
-+
-+	return 0;
-+}
-+
-+static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
-+			struct mmc_data *data)
-+{
-+	struct sunxi_mmc_host *mmchost = mmc->priv;
-+	unsigned int cmdval = SUNXI_MMC_CMD_START;
-+	unsigned int timeout_msecs;
-+	int error = 0;
-+	unsigned int status = 0;
-+	unsigned int bytecnt = 0;
-+
-+	if (mmchost->fatal_err)
-+		return -1;
-+	if (cmd->resp_type & MMC_RSP_BUSY)
-+		debug("mmc cmd %d check rsp busy\n", cmd->cmdidx);
-+	if (cmd->cmdidx == 12)
-+		return 0;
-+
-+	if (!cmd->cmdidx)
-+		cmdval |= SUNXI_MMC_CMD_SEND_INIT_SEQ;
-+	if (cmd->resp_type & MMC_RSP_PRESENT)
-+		cmdval |= SUNXI_MMC_CMD_RESP_EXPIRE;
-+	if (cmd->resp_type & MMC_RSP_136)
-+		cmdval |= SUNXI_MMC_CMD_LONG_RESPONSE;
-+	if (cmd->resp_type & MMC_RSP_CRC)
-+		cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC;
-+
-+	if (data) {
-+		if ((u32) data->dest & 0x3) {
-+			error = -1;
-+			goto out;
-+		}
-+
-+		cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER;
-+		if (data->flags & MMC_DATA_WRITE)
-+			cmdval |= SUNXI_MMC_CMD_WRITE;
-+		if (data->blocks > 1)
-+			cmdval |= SUNXI_MMC_CMD_AUTO_STOP;
-+		writel(data->blocksize, &mmchost->reg->blksz);
-+		writel(data->blocks * data->blocksize, &mmchost->reg->bytecnt);
-+	}
-+
-+	debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", mmchost->mmc_no,
-+	      cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg);
-+	writel(cmd->cmdarg, &mmchost->reg->arg);
-+
-+	if (!data)
-+		writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
-+
-+	/*
-+	 * transfer data and check status
-+	 * STATREG[2] : FIFO empty
-+	 * STATREG[3] : FIFO full
-+	 */
-+	if (data) {
-+		int ret = 0;
-+
-+		bytecnt = data->blocksize * data->blocks;
-+		debug("trans data %d bytes\n", bytecnt);
-+		writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
-+		ret = mmc_trans_data_by_cpu(mmc, data);
-+		if (ret) {
-+			error = readl(&mmchost->reg->rint) & \
-+				SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT;
-+			error = TIMEOUT;
-+			goto out;
-+		}
-+	}
-+
-+	error = mmc_rint_wait(mmc, 0xfffff, SUNXI_MMC_RINT_COMMAND_DONE, "cmd");
-+	if (error)
-+		goto out;
-+
-+	if (data) {
-+		timeout_msecs = 120;
-+		debug("cacl timeout %x msec\n", timeout_msecs);
-+		error = mmc_rint_wait(mmc, timeout_msecs,
-+				      data->blocks > 1 ?
-+				      SUNXI_MMC_RINT_AUTO_COMMAND_DONE :
-+				      SUNXI_MMC_RINT_DATA_OVER,
-+				      "data");
-+		if (error)
-+			goto out;
-+	}
-+
-+	if (cmd->resp_type & MMC_RSP_BUSY) {
-+		timeout_msecs = 2000;
-+		do {
-+			status = readl(&mmchost->reg->status);
-+			if (!timeout_msecs--) {
-+				debug("busy timeout\n");
-+				error = TIMEOUT;
-+				goto out;
-+			}
-+			udelay(1000);
-+		} while (status & SUNXI_MMC_STATUS_CARD_DATA_BUSY);
-+	}
-+
-+	if (cmd->resp_type & MMC_RSP_136) {
-+		cmd->response[0] = readl(&mmchost->reg->resp3);
-+		cmd->response[1] = readl(&mmchost->reg->resp2);
-+		cmd->response[2] = readl(&mmchost->reg->resp1);
-+		cmd->response[3] = readl(&mmchost->reg->resp0);
-+		debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n",
-+		      cmd->response[3], cmd->response[2],
-+		      cmd->response[1], cmd->response[0]);
-+	} else {
-+		cmd->response[0] = readl(&mmchost->reg->resp0);
-+		debug("mmc resp 0x%08x\n", cmd->response[0]);
-+	}
-+out:
-+	if (error < 0) {
-+		writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
-+		mmc_update_clk(mmc);
-+	}
-+	writel(0xffffffff, &mmchost->reg->rint);
-+	writel(readl(&mmchost->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET,
-+	       &mmchost->reg->gctrl);
-+
-+	return error;
-+}
-+
-+static const struct mmc_ops sunxi_mmc_ops = {
-+	.send_cmd	= mmc_send_cmd,
-+	.set_ios	= mmc_set_ios,
-+	.init		= mmc_core_init,
-+};
-+
-+int sunxi_mmc_init(int sdc_no)
-+{
-+	struct mmc_config *cfg = &mmc_host[sdc_no].cfg;
-+
-+	memset(&mmc_host[sdc_no], 0, sizeof(struct sunxi_mmc_host));
-+
-+	cfg->name = "SUNXI SD/MMC";
-+	cfg->ops  = &sunxi_mmc_ops;
-+
-+	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
-+	cfg->host_caps = MMC_MODE_4BIT;
-+	cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
-+	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
-+
-+	cfg->f_min = 400000;
-+	cfg->f_max = 52000000;
-+
-+	mmc_resource_init(sdc_no);
-+	mmc_clk_io_on(sdc_no);
-+
-+	if (mmc_create(cfg, &mmc_host[sdc_no]) == NULL)
-+		return -1;
-+
-+	return 0;
-+}
-diff -ruN u-boot-2014.04/drivers/net/designware.c u-boot-sunxi/drivers/net/designware.c
---- u-boot-2014.04/drivers/net/designware.c	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/drivers/net/designware.c	2014-09-06 16:58:36.301953111 +0200
-@@ -249,7 +249,7 @@
- 	rx_descs_init(dev);
- 	tx_descs_init(dev);
- 
--	writel(FIXEDBURST | PRIORXTX_41 | BURST_16, &dma_p->busmode);
-+	writel(FIXEDBURST | PRIORXTX_41 | DMA_PBL, &dma_p->busmode);
- 
- 	writel(readl(&dma_p->opmode) | FLUSHTXFIFO | STOREFORWARD,
- 	       &dma_p->opmode);
-@@ -280,10 +280,18 @@
- 	u32 desc_num = priv->tx_currdescnum;
- 	struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
- 
--	/* Invalidate only "status" field for the following check */
--	invalidate_dcache_range((unsigned long)&desc_p->txrx_status,
--				(unsigned long)&desc_p->txrx_status +
--				sizeof(desc_p->txrx_status));
-+	/*
-+	 * Strictly we only need to invalidate the "txrx_status" field
-+	 * for the following check, but on some platforms we cannot
-+	 * invalidate only 4 bytes, so roundup to
-+	 * ARCH_DMA_MINALIGN. This is safe because the individual
-+	 * descriptors in the array are each aligned to
-+	 * ARCH_DMA_MINALIGN.
-+	 */
-+	invalidate_dcache_range(
-+		(unsigned long)desc_p,
-+		(unsigned long)desc_p +
-+		roundup(sizeof(desc_p->txrx_status), ARCH_DMA_MINALIGN));
- 
- 	/* Check if the descriptor is owned by CPU */
- 	if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
-@@ -351,7 +359,7 @@
- 		/* Invalidate received data */
- 		invalidate_dcache_range((unsigned long)desc_p->dmamac_addr,
- 					(unsigned long)desc_p->dmamac_addr +
--					length);
-+					roundup(length, ARCH_DMA_MINALIGN));
- 
- 		NetReceive(desc_p->dmamac_addr, length);
- 
-@@ -390,6 +398,8 @@
- 	if (!phydev)
- 		return -1;
- 
-+	phy_connect_dev(phydev, dev);
-+
- 	phydev->supported &= PHY_GBIT_FEATURES;
- 	phydev->advertising = phydev->supported;
- 
-@@ -412,7 +422,8 @@
- 	 * Since the priv structure contains the descriptors which need a strict
- 	 * buswidth alignment, memalign is used to allocate memory
- 	 */
--	priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev));
-+	priv = (struct dw_eth_dev *) memalign(ARCH_DMA_MINALIGN,
-+					      sizeof(struct dw_eth_dev));
- 	if (!priv) {
- 		free(dev);
- 		return -ENOMEM;
-diff -ruN u-boot-2014.04/drivers/net/designware.h u-boot-sunxi/drivers/net/designware.h
---- u-boot-2014.04/drivers/net/designware.h	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/drivers/net/designware.h	2014-09-06 16:58:36.301953111 +0200
-@@ -77,18 +77,18 @@
- 
- #define DW_DMA_BASE_OFFSET	(0x1000)
- 
-+/* Default DMA Burst length */
-+#ifndef CONFIG_DW_GMAC_DEFAULT_DMA_PBL
-+#define CONFIG_DW_GMAC_DEFAULT_DMA_PBL 8
-+#endif
-+
- /* Bus mode register definitions */
- #define FIXEDBURST		(1 << 16)
- #define PRIORXTX_41		(3 << 14)
- #define PRIORXTX_31		(2 << 14)
- #define PRIORXTX_21		(1 << 14)
- #define PRIORXTX_11		(0 << 14)
--#define BURST_1			(1 << 8)
--#define BURST_2			(2 << 8)
--#define BURST_4			(4 << 8)
--#define BURST_8			(8 << 8)
--#define BURST_16		(16 << 8)
--#define BURST_32		(32 << 8)
-+#define DMA_PBL			(CONFIG_DW_GMAC_DEFAULT_DMA_PBL<<8)
- #define RXHIGHPRIO		(1 << 1)
- #define DMAMAC_SRST		(1 << 0)
- 
-@@ -215,15 +215,14 @@
- #endif
- 
- struct dw_eth_dev {
--	u32 interface;
--	u32 tx_currdescnum;
--	u32 rx_currdescnum;
--
- 	struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
- 	struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
-+	char txbuffs[TX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
-+	char rxbuffs[RX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN);
- 
--	char txbuffs[TX_TOTAL_BUFSIZE];
--	char rxbuffs[RX_TOTAL_BUFSIZE];
-+	u32 interface;
-+	u32 tx_currdescnum;
-+	u32 rx_currdescnum;
- 
- 	struct eth_mac_regs *mac_regs_p;
- 	struct eth_dma_regs *dma_regs_p;
-diff -ruN u-boot-2014.04/drivers/net/Makefile u-boot-sunxi/drivers/net/Makefile
---- u-boot-2014.04/drivers/net/Makefile	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/drivers/net/Makefile	2014-09-06 16:58:36.297953112 +0200
-@@ -50,7 +50,7 @@
- obj-$(CONFIG_SH_ETHER) += sh_eth.o
- obj-$(CONFIG_SMC91111) += smc91111.o
- obj-$(CONFIG_SMC911X) += smc911x.o
--obj-$(CONFIG_SUNXI_WEMAC) += sunxi_wemac.o
-+obj-$(CONFIG_SUNXI_EMAC) += sunxi_emac.o
- obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
- obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
- obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o
-diff -ruN u-boot-2014.04/drivers/net/sunxi_emac.c u-boot-sunxi/drivers/net/sunxi_emac.c
---- u-boot-2014.04/drivers/net/sunxi_emac.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/drivers/net/sunxi_emac.c	2014-09-06 16:58:36.317953111 +0200
-@@ -0,0 +1,521 @@
-+/*
-+ * sunxi_emac.c -- Allwinner A10 ethernet driver
-+ *
-+ * (C) Copyright 2012, Stefan Roese <sr@denx.de>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <linux/err.h>
-+#include <malloc.h>
-+#include <miiphy.h>
-+#include <net.h>
-+#include <asm/io.h>
-+#include <asm/arch/clock.h>
-+#include <asm/arch/gpio.h>
-+
-+/* EMAC register  */
-+struct emac_regs {
-+	u32 ctl;	/* 0x00 */
-+	u32 tx_mode;	/* 0x04 */
-+	u32 tx_flow;	/* 0x08 */
-+	u32 tx_ctl0;	/* 0x0c */
-+	u32 tx_ctl1;	/* 0x10 */
-+	u32 tx_ins;	/* 0x14 */
-+	u32 tx_pl0;	/* 0x18 */
-+	u32 tx_pl1;	/* 0x1c */
-+	u32 tx_sta;	/* 0x20 */
-+	u32 tx_io_data;	/* 0x24 */
-+	u32 tx_io_data1;/* 0x28 */
-+	u32 tx_tsvl0;	/* 0x2c */
-+	u32 tx_tsvh0;	/* 0x30 */
-+	u32 tx_tsvl1;	/* 0x34 */
-+	u32 tx_tsvh1;	/* 0x38 */
-+	u32 rx_ctl;	/* 0x3c */
-+	u32 rx_hash0;	/* 0x40 */
-+	u32 rx_hash1;	/* 0x44 */
-+	u32 rx_sta;	/* 0x48 */
-+	u32 rx_io_data;	/* 0x4c */
-+	u32 rx_fbc;	/* 0x50 */
-+	u32 int_ctl;	/* 0x54 */
-+	u32 int_sta;	/* 0x58 */
-+	u32 mac_ctl0;	/* 0x5c */
-+	u32 mac_ctl1;	/* 0x60 */
-+	u32 mac_ipgt;	/* 0x64 */
-+	u32 mac_ipgr;	/* 0x68 */
-+	u32 mac_clrt;	/* 0x6c */
-+	u32 mac_maxf;	/* 0x70 */
-+	u32 mac_supp;	/* 0x74 */
-+	u32 mac_test;	/* 0x78 */
-+	u32 mac_mcfg;	/* 0x7c */
-+	u32 mac_mcmd;	/* 0x80 */
-+	u32 mac_madr;	/* 0x84 */
-+	u32 mac_mwtd;	/* 0x88 */
-+	u32 mac_mrdd;	/* 0x8c */
-+	u32 mac_mind;	/* 0x90 */
-+	u32 mac_ssrr;	/* 0x94 */
-+	u32 mac_a0;	/* 0x98 */
-+	u32 mac_a1;	/* 0x9c */
-+};
-+
-+/* SRAMC register  */
-+struct sunxi_sramc_regs {
-+	u32 ctrl0;
-+	u32 ctrl1;
-+};
-+
-+/* 0: Disable       1: Aborted frame enable(default) */
-+#define EMAC_TX_AB_M		(0x1 << 0)
-+/* 0: CPU           1: DMA(default) */
-+#define EMAC_TX_TM		(0x1 << 1)
-+
-+#define EMAC_TX_SETUP		(0)
-+
-+/* 0: DRQ asserted  1: DRQ automatically(default) */
-+#define EMAC_RX_DRQ_MODE	(0x1 << 1)
-+/* 0: CPU           1: DMA(default) */
-+#define EMAC_RX_TM		(0x1 << 2)
-+/* 0: Normal(default)        1: Pass all Frames */
-+#define EMAC_RX_PA		(0x1 << 4)
-+/* 0: Normal(default)        1: Pass Control Frames */
-+#define EMAC_RX_PCF		(0x1 << 5)
-+/* 0: Normal(default)        1: Pass Frames with CRC Error */
-+#define EMAC_RX_PCRCE		(0x1 << 6)
-+/* 0: Normal(default)        1: Pass Frames with Length Error */
-+#define EMAC_RX_PLE		(0x1 << 7)
-+/* 0: Normal                 1: Pass Frames length out of range(default) */
-+#define EMAC_RX_POR		(0x1 << 8)
-+/* 0: Not accept             1: Accept unicast Packets(default) */
-+#define EMAC_RX_UCAD		(0x1 << 16)
-+/* 0: Normal(default)        1: DA Filtering */
-+#define EMAC_RX_DAF		(0x1 << 17)
-+/* 0: Not accept             1: Accept multicast Packets(default) */
-+#define EMAC_RX_MCO		(0x1 << 20)
-+/* 0: Disable(default)       1: Enable Hash filter */
-+#define EMAC_RX_MHF		(0x1 << 21)
-+/* 0: Not accept             1: Accept Broadcast Packets(default) */
-+#define EMAC_RX_BCO		(0x1 << 22)
-+/* 0: Disable(default)       1: Enable SA Filtering */
-+#define EMAC_RX_SAF		(0x1 << 24)
-+/* 0: Normal(default)        1: Inverse Filtering */
-+#define EMAC_RX_SAIF		(0x1 << 25)
-+
-+#define EMAC_RX_SETUP		(EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \
-+				 EMAC_RX_MCO | EMAC_RX_BCO)
-+
-+/* 0: Disable                1: Enable Receive Flow Control(default) */
-+#define EMAC_MAC_CTL0_RFC	(0x1 << 2)
-+/* 0: Disable                1: Enable Transmit Flow Control(default) */
-+#define EMAC_MAC_CTL0_TFC	(0x1 << 3)
-+
-+#define EMAC_MAC_CTL0_SETUP	(EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
-+
-+/* 0: Disable                1: Enable MAC Frame Length Checking(default) */
-+#define EMAC_MAC_CTL1_FLC	(0x1 << 1)
-+/* 0: Disable(default)       1: Enable Huge Frame */
-+#define EMAC_MAC_CTL1_HF	(0x1 << 2)
-+/* 0: Disable(default)       1: Enable MAC Delayed CRC */
-+#define EMAC_MAC_CTL1_DCRC	(0x1 << 3)
-+/* 0: Disable                1: Enable MAC CRC(default) */
-+#define EMAC_MAC_CTL1_CRC	(0x1 << 4)
-+/* 0: Disable                1: Enable MAC PAD Short frames(default) */
-+#define EMAC_MAC_CTL1_PC	(0x1 << 5)
-+/* 0: Disable(default)       1: Enable MAC PAD Short frames and append CRC */
-+#define EMAC_MAC_CTL1_VC	(0x1 << 6)
-+/* 0: Disable(default)       1: Enable MAC auto detect Short frames */
-+#define EMAC_MAC_CTL1_ADP	(0x1 << 7)
-+/* 0: Disable(default)       1: Enable */
-+#define EMAC_MAC_CTL1_PRE	(0x1 << 8)
-+/* 0: Disable(default)       1: Enable */
-+#define EMAC_MAC_CTL1_LPE	(0x1 << 9)
-+/* 0: Disable(default)       1: Enable no back off */
-+#define EMAC_MAC_CTL1_NB	(0x1 << 12)
-+/* 0: Disable(default)       1: Enable */
-+#define EMAC_MAC_CTL1_BNB	(0x1 << 13)
-+/* 0: Disable(default)       1: Enable */
-+#define EMAC_MAC_CTL1_ED	(0x1 << 14)
-+
-+#define EMAC_MAC_CTL1_SETUP	(EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
-+				 EMAC_MAC_CTL1_PC)
-+
-+#define EMAC_MAC_IPGT		0x15
-+
-+#define EMAC_MAC_NBTB_IPG1	0xc
-+#define EMAC_MAC_NBTB_IPG2	0x12
-+
-+#define EMAC_MAC_CW		0x37
-+#define EMAC_MAC_RM		0xf
-+
-+#define EMAC_MAC_MFL		0x0600
-+
-+/* Receive status */
-+#define EMAC_CRCERR		(0x1 << 4)
-+#define EMAC_LENERR		(0x3 << 5)
-+
-+#define DMA_CPU_TRRESHOLD	2000
-+
-+struct emac_eth_dev {
-+	u32 speed;
-+	u32 duplex;
-+	u32 phy_configured;
-+	int link_printed;
-+};
-+
-+struct emac_rxhdr {
-+	s16 rx_len;
-+	u16 rx_status;
-+};
-+
-+static void emac_inblk_32bit(void *reg, void *data, int count)
-+{
-+	int cnt = (count + 3) >> 2;
-+
-+	if (cnt) {
-+		u32 *buf = data;
-+
-+		do {
-+			u32 x = readl(reg);
-+			*buf++ = x;
-+		} while (--cnt);
-+	}
-+}
-+
-+static void emac_outblk_32bit(void *reg, void *data, int count)
-+{
-+	int cnt = (count + 3) >> 2;
-+
-+	if (cnt) {
-+		const u32 *buf = data;
-+
-+		do {
-+			writel(*buf++, reg);
-+		} while (--cnt);
-+	}
-+}
-+
-+/* Read a word from phyxcer */
-+static int emac_phy_read(const char *devname, unsigned char addr,
-+			  unsigned char reg, unsigned short *value)
-+{
-+	struct eth_device *dev = eth_get_dev_by_name(devname);
-+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
-+
-+	/* issue the phy address and reg */
-+	writel(addr << 8 | reg, &regs->mac_madr);
-+
-+	/* pull up the phy io line */
-+	writel(0x1, &regs->mac_mcmd);
-+
-+	/* Wait read complete */
-+	mdelay(1);
-+
-+	/* push down the phy io line */
-+	writel(0x0, &regs->mac_mcmd);
-+
-+	/* and write data */
-+	*value = readl(&regs->mac_mrdd);
-+
-+	return 0;
-+}
-+
-+/* Write a word to phyxcer */
-+static int emac_phy_write(const char *devname, unsigned char addr,
-+			   unsigned char reg, unsigned short value)
-+{
-+	struct eth_device *dev = eth_get_dev_by_name(devname);
-+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
-+
-+	/* issue the phy address and reg */
-+	writel(addr << 8 | reg, &regs->mac_madr);
-+
-+	/* pull up the phy io line */
-+	writel(0x1, &regs->mac_mcmd);
-+
-+	/* Wait write complete */
-+	mdelay(1);
-+
-+	/* push down the phy io line */
-+	writel(0x0, &regs->mac_mcmd);
-+
-+	/* and write data */
-+	writel(value, &regs->mac_mwtd);
-+
-+	return 0;
-+}
-+
-+static void emac_setup(struct eth_device *dev)
-+{
-+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
-+	u32 reg_val;
-+	u16 phy_val;
-+	u32 duplex_flag;
-+
-+	/* Set up TX */
-+	writel(EMAC_TX_SETUP, &regs->tx_mode);
-+
-+	/* Set up RX */
-+	writel(EMAC_RX_SETUP, &regs->rx_ctl);
-+
-+	/* Set MAC */
-+	/* Set MAC CTL0 */
-+	writel(EMAC_MAC_CTL0_SETUP, &regs->mac_ctl0);
-+
-+	/* Set MAC CTL1 */
-+	emac_phy_read(dev->name, 1, 0, &phy_val);
-+	debug("PHY SETUP, reg 0 value: %x\n", phy_val);
-+	duplex_flag = !!(phy_val & (1 << 8));
-+
-+	reg_val = 0;
-+	if (duplex_flag)
-+		reg_val = (0x1 << 0);
-+	writel(EMAC_MAC_CTL1_SETUP | reg_val, &regs->mac_ctl1);
-+
-+	/* Set up IPGT */
-+	writel(EMAC_MAC_IPGT, &regs->mac_ipgt);
-+
-+	/* Set up IPGR */
-+	writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), &regs->mac_ipgr);
-+
-+	/* Set up Collison window */
-+	writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), &regs->mac_clrt);
-+
-+	/* Set up Max Frame Length */
-+	writel(EMAC_MAC_MFL, &regs->mac_maxf);
-+}
-+
-+static void emac_reset(struct eth_device *dev)
-+{
-+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
-+
-+	debug("resetting device\n");
-+
-+	/* RESET device */
-+	writel(0, &regs->ctl);
-+	udelay(200);
-+
-+	writel(1, &regs->ctl);
-+	udelay(200);
-+}
-+
-+static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
-+{
-+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
-+	struct emac_eth_dev *priv = dev->priv;
-+	u16 phy_reg;
-+
-+	/* Init EMAC */
-+
-+	/* Flush RX FIFO */
-+	setbits_le32(&regs->rx_ctl, 0x8);
-+	udelay(1);
-+
-+	/* Init MAC */
-+
-+	/* Soft reset MAC */
-+	clrbits_le32(&regs->mac_ctl0, 0x1 << 15);
-+
-+	/* Clear RX counter */
-+	writel(0x0, &regs->rx_fbc);
-+	udelay(1);
-+
-+	/* Set up EMAC */
-+	emac_setup(dev);
-+
-+	writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
-+	       dev->enetaddr[2], &regs->mac_a1);
-+	writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
-+	       dev->enetaddr[5], &regs->mac_a0);
-+
-+	mdelay(1);
-+
-+	emac_reset(dev);
-+
-+	/* PHY POWER UP */
-+	emac_phy_read(dev->name, 1, 0, &phy_reg);
-+	emac_phy_write(dev->name, 1, 0, phy_reg & (~(0x1 << 11)));
-+	mdelay(1);
-+
-+	emac_phy_read(dev->name, 1, 0, &phy_reg);
-+
-+	priv->speed = miiphy_speed(dev->name, 0);
-+	priv->duplex = miiphy_duplex(dev->name, 0);
-+
-+	/* Print link status only once */
-+	if (!priv->link_printed) {
-+		printf("ENET Speed is %d Mbps - %s duplex connection\n",
-+		       priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL");
-+		priv->link_printed = 1;
-+	}
-+
-+	/* Set EMAC SPEED depend on PHY */
-+	clrsetbits_le32(&regs->mac_supp, 1 << 8,
-+			((phy_reg & (0x1 << 13)) >> 13) << 8);
-+
-+	/* Set duplex depend on phy */
-+	clrsetbits_le32(&regs->mac_ctl1, 1 << 0,
-+			((phy_reg & (0x1 << 8)) >> 8) << 0);
-+
-+	/* Enable RX/TX */
-+	setbits_le32(&regs->ctl, 0x7);
-+
-+	return 0;
-+}
-+
-+static void sunxi_emac_eth_halt(struct eth_device *dev)
-+{
-+	/* Nothing to do here */
-+}
-+
-+static int sunxi_emac_eth_recv(struct eth_device *dev)
-+{
-+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
-+	struct emac_rxhdr rxhdr;
-+	u32 rxcount;
-+	u32 reg_val;
-+	int rx_len;
-+	int rx_status;
-+	int good_packet;
-+
-+	/* Check packet ready or not */
-+
-+	/* Race warning: The first packet might arrive with
-+	 * the interrupts disabled, but the second will fix
-+	 */
-+	rxcount = readl(&regs->rx_fbc);
-+	if (!rxcount) {
-+		/* Had one stuck? */
-+		rxcount = readl(&regs->rx_fbc);
-+		if (!rxcount)
-+			return 0;
-+	}
-+
-+	reg_val = readl(&regs->rx_io_data);
-+	if (reg_val != 0x0143414d) {
-+		/* Disable RX */
-+		clrbits_le32(&regs->ctl, 0x1 << 2);
-+
-+		/* Flush RX FIFO */
-+		setbits_le32(&regs->rx_ctl, 0x1 << 3);
-+		while (readl(&regs->rx_ctl) & (0x1 << 3))
-+			;
-+
-+		/* Enable RX */
-+		setbits_le32(&regs->ctl, 0x1 << 2);
-+
-+		return 0;
-+	}
-+
-+	/* A packet ready now
-+	 * Get status/length
-+	 */
-+	good_packet = 1;
-+
-+	emac_inblk_32bit(&regs->rx_io_data, &rxhdr, sizeof(rxhdr));
-+
-+	rx_len = rxhdr.rx_len;
-+	rx_status = rxhdr.rx_status;
-+
-+	/* Packet Status check */
-+	if (rx_len < 0x40) {
-+		good_packet = 0;
-+		debug("RX: Bad Packet (runt)\n");
-+	}
-+
-+	/* rx_status is identical to RSR register. */
-+	if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) {
-+		good_packet = 0;
-+		if (rx_status & EMAC_CRCERR)
-+			printf("crc error\n");
-+		if (rx_status & EMAC_LENERR)
-+			printf("length error\n");
-+	}
-+
-+	/* Move data from EMAC */
-+	if (good_packet) {
-+		if (rx_len > DMA_CPU_TRRESHOLD) {
-+			printf("Received packet is too big (len=%d)\n", rx_len);
-+		} else {
-+			emac_inblk_32bit((void *)&regs->rx_io_data,
-+					 NetRxPackets[0], rx_len);
-+
-+			/* Pass to upper layer */
-+			NetReceive(NetRxPackets[0], rx_len);
-+			return rx_len;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
-+{
-+	struct emac_regs *regs = (struct emac_regs *)dev->iobase;
-+
-+	/* Select channel 0 */
-+	writel(0, &regs->tx_ins);
-+
-+	/* Write packet */
-+	emac_outblk_32bit((void *)&regs->tx_io_data, packet, len);
-+
-+	/* Set TX len */
-+	writel(len, &regs->tx_pl0);
-+
-+	/* Start translate from fifo to phy */
-+	setbits_le32(&regs->tx_ctl0, 1);
-+
-+	return 0;
-+}
-+
-+int sunxi_emac_initialize(void)
-+{
-+	struct sunxi_ccm_reg *const ccm =
-+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-+	struct sunxi_sramc_regs *sram =
-+		(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
-+	struct emac_regs *regs =
-+		(struct emac_regs *)SUNXI_EMAC_BASE;
-+	struct eth_device *dev;
-+	struct emac_eth_dev *priv;
-+	int pin;
-+
-+	dev = malloc(sizeof(*dev));
-+	if (dev == NULL)
-+		return -ENOMEM;
-+
-+	priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev));
-+	if (!priv) {
-+		free(dev);
-+		return -ENOMEM;
-+	}
-+
-+	memset(dev, 0, sizeof(*dev));
-+	memset(priv, 0, sizeof(struct emac_eth_dev));
-+
-+	/* Map SRAM to EMAC */
-+	setbits_le32(&sram->ctrl1, 0x5 << 2);
-+
-+	/* Configure pin mux settings for MII Ethernet */
-+	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
-+		sunxi_gpio_set_cfgpin(pin, SUNXI_GPA0_EMAC);
-+
-+	/* Set up clock gating */
-+	setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
-+
-+	/* Set MII clock */
-+	clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
-+
-+	dev->iobase = (int)regs;
-+	dev->priv = priv;
-+	dev->init = sunxi_emac_eth_init;
-+	dev->halt = sunxi_emac_eth_halt;
-+	dev->send = sunxi_emac_eth_send;
-+	dev->recv = sunxi_emac_eth_recv;
-+	strcpy(dev->name, "emac");
-+
-+	eth_register(dev);
-+
-+	miiphy_register(dev->name, emac_phy_read, emac_phy_write);
-+
-+	return 0;
-+}
-diff -ruN u-boot-2014.04/drivers/net/sunxi_wemac.c u-boot-sunxi/drivers/net/sunxi_wemac.c
---- u-boot-2014.04/drivers/net/sunxi_wemac.c	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/drivers/net/sunxi_wemac.c	1970-01-01 01:00:00.000000000 +0100
-@@ -1,525 +0,0 @@
--/*
-- * sunxi_wemac.c -- Allwinner A10 ethernet driver
-- *
-- * (C) Copyright 2012, Stefan Roese <sr@denx.de>
-- *
-- * SPDX-License-Identifier:	GPL-2.0+
-- */
--
--#include <common.h>
--#include <malloc.h>
--#include <net.h>
--#include <miiphy.h>
--#include <linux/err.h>
--#include <asm/io.h>
--#include <asm/arch/clock.h>
--#include <asm/arch/gpio.h>
--
--/* EMAC register  */
--struct wemac_regs {
--	u32 ctl;	/* 0x00 */
--	u32 tx_mode;	/* 0x04 */
--	u32 tx_flow;	/* 0x08 */
--	u32 tx_ctl0;	/* 0x0c */
--	u32 tx_ctl1;	/* 0x10 */
--	u32 tx_ins;	/* 0x14 */
--	u32 tx_pl0;	/* 0x18 */
--	u32 tx_pl1;	/* 0x1c */
--	u32 tx_sta;	/* 0x20 */
--	u32 tx_io_data;	/* 0x24 */
--	u32 tx_io_data1; /* 0x28 */
--	u32 tx_tsvl0;	/* 0x2c */
--	u32 tx_tsvh0;	/* 0x30 */
--	u32 tx_tsvl1;	/* 0x34 */
--	u32 tx_tsvh1;	/* 0x38 */
--	u32 rx_ctl;	/* 0x3c */
--	u32 rx_hash0;	/* 0x40 */
--	u32 rx_hash1;	/* 0x44 */
--	u32 rx_sta;	/* 0x48 */
--	u32 rx_io_data;	/* 0x4c */
--	u32 rx_fbc;	/* 0x50 */
--	u32 int_ctl;	/* 0x54 */
--	u32 int_sta;	/* 0x58 */
--	u32 mac_ctl0;	/* 0x5c */
--	u32 mac_ctl1;	/* 0x60 */
--	u32 mac_ipgt;	/* 0x64 */
--	u32 mac_ipgr;	/* 0x68 */
--	u32 mac_clrt;	/* 0x6c */
--	u32 mac_maxf;	/* 0x70 */
--	u32 mac_supp;	/* 0x74 */
--	u32 mac_test;	/* 0x78 */
--	u32 mac_mcfg;	/* 0x7c */
--	u32 mac_mcmd;	/* 0x80 */
--	u32 mac_madr;	/* 0x84 */
--	u32 mac_mwtd;	/* 0x88 */
--	u32 mac_mrdd;	/* 0x8c */
--	u32 mac_mind;	/* 0x90 */
--	u32 mac_ssrr;	/* 0x94 */
--	u32 mac_a0;	/* 0x98 */
--	u32 mac_a1;	/* 0x9c */
--};
--
--/* SRAMC register  */
--struct sunxi_sramc_regs {
--	u32 ctrl0;
--	u32 ctrl1;
--};
--
--/* 0: Disable       1: Aborted frame enable(default) */
--#define EMAC_TX_AB_M		(0x1 << 0)
--/* 0: CPU           1: DMA(default) */
--#define EMAC_TX_TM		(0x1 << 1)
--
--#define EMAC_TX_SETUP		(0)
--
--/* 0: DRQ asserted  1: DRQ automatically(default) */
--#define EMAC_RX_DRQ_MODE	(0x1 << 1)
--/* 0: CPU           1: DMA(default) */
--#define EMAC_RX_TM		(0x1 << 2)
--/* 0: Normal(default)        1: Pass all Frames */
--#define EMAC_RX_PA		(0x1 << 4)
--/* 0: Normal(default)        1: Pass Control Frames */
--#define EMAC_RX_PCF		(0x1 << 5)
--/* 0: Normal(default)        1: Pass Frames with CRC Error */
--#define EMAC_RX_PCRCE		(0x1 << 6)
--/* 0: Normal(default)        1: Pass Frames with Length Error */
--#define EMAC_RX_PLE		(0x1 << 7)
--/* 0: Normal                 1: Pass Frames length out of range(default) */
--#define EMAC_RX_POR		(0x1 << 8)
--/* 0: Not accept             1: Accept unicast Packets(default) */
--#define EMAC_RX_UCAD		(0x1 << 16)
--/* 0: Normal(default)        1: DA Filtering */
--#define EMAC_RX_DAF		(0x1 << 17)
--/* 0: Not accept             1: Accept multicast Packets(default) */
--#define EMAC_RX_MCO		(0x1 << 20)
--/* 0: Disable(default)       1: Enable Hash filter */
--#define EMAC_RX_MHF		(0x1 << 21)
--/* 0: Not accept             1: Accept Broadcast Packets(default) */
--#define EMAC_RX_BCO		(0x1 << 22)
--/* 0: Disable(default)       1: Enable SA Filtering */
--#define EMAC_RX_SAF		(0x1 << 24)
--/* 0: Normal(default)        1: Inverse Filtering */
--#define EMAC_RX_SAIF		(0x1 << 25)
--
--#define EMAC_RX_SETUP		(EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \
--				 EMAC_RX_MCO | EMAC_RX_BCO)
--
--/* 0: Disable                1: Enable Receive Flow Control(default) */
--#define EMAC_MAC_CTL0_RFC	(0x1 << 2)
--/* 0: Disable                1: Enable Transmit Flow Control(default) */
--#define EMAC_MAC_CTL0_TFC	(0x1 << 3)
--
--#define EMAC_MAC_CTL0_SETUP	(EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
--
--/* 0: Disable                1: Enable MAC Frame Length Checking(default) */
--#define EMAC_MAC_CTL1_FLC	(0x1 << 1)
--/* 0: Disable(default)       1: Enable Huge Frame */
--#define EMAC_MAC_CTL1_HF	(0x1 << 2)
--/* 0: Disable(default)       1: Enable MAC Delayed CRC */
--#define EMAC_MAC_CTL1_DCRC	(0x1 << 3)
--/* 0: Disable                1: Enable MAC CRC(default) */
--#define EMAC_MAC_CTL1_CRC	(0x1 << 4)
--/* 0: Disable                1: Enable MAC PAD Short frames(default) */
--#define EMAC_MAC_CTL1_PC	(0x1 << 5)
--/* 0: Disable(default)       1: Enable MAC PAD Short frames and append CRC */
--#define EMAC_MAC_CTL1_VC	(0x1 << 6)
--/* 0: Disable(default)       1: Enable MAC auto detect Short frames */
--#define EMAC_MAC_CTL1_ADP	(0x1 << 7)
--/* 0: Disable(default)       1: Enable */
--#define EMAC_MAC_CTL1_PRE	(0x1 << 8)
--/* 0: Disable(default)       1: Enable */
--#define EMAC_MAC_CTL1_LPE	(0x1 << 9)
--/* 0: Disable(default)       1: Enable no back off */
--#define EMAC_MAC_CTL1_NB	(0x1 << 12)
--/* 0: Disable(default)       1: Enable */
--#define EMAC_MAC_CTL1_BNB	(0x1 << 13)
--/* 0: Disable(default)       1: Enable */
--#define EMAC_MAC_CTL1_ED	(0x1 << 14)
--
--#define EMAC_MAC_CTL1_SETUP	(EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
--				 EMAC_MAC_CTL1_PC)
--
--#define EMAC_MAC_IPGT		0x15
--
--#define EMAC_MAC_NBTB_IPG1	0xC
--#define EMAC_MAC_NBTB_IPG2	0x12
--
--#define EMAC_MAC_CW		0x37
--#define EMAC_MAC_RM		0xF
--
--#define EMAC_MAC_MFL		0x0600
--
--/* Receive status */
--#define EMAC_CRCERR		(1 << 4)
--#define EMAC_LENERR		(3 << 5)
--
--#define DMA_CPU_TRRESHOLD	2000
--
--struct wemac_eth_dev {
--	u32 speed;
--	u32 duplex;
--	u32 phy_configured;
--	int link_printed;
--};
--
--struct wemac_rxhdr {
--	s16 rx_len;
--	u16 rx_status;
--};
--
--static void wemac_inblk_32bit(void *reg, void *data, int count)
--{
--	int cnt = (count + 3) >> 2;
--
--	if (cnt) {
--		u32 *buf = data;
--
--		do {
--			u32 x = readl(reg);
--			*buf++ = x;
--		} while (--cnt);
--	}
--}
--
--static void wemac_outblk_32bit(void *reg, void *data, int count)
--{
--	int cnt = (count + 3) >> 2;
--
--	if (cnt) {
--		const u32 *buf = data;
--
--		do {
--			writel(*buf++, reg);
--		} while (--cnt);
--	}
--}
--
--/*
-- * Read a word from phyxcer
-- */
--static int wemac_phy_read(const char *devname, unsigned char addr,
--			  unsigned char reg, unsigned short *value)
--{
--	struct eth_device *dev = eth_get_dev_by_name(devname);
--	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
--
--	/* issue the phy address and reg */
--	writel(addr << 8 | reg, &regs->mac_madr);
--
--	/* pull up the phy io line */
--	writel(0x1, &regs->mac_mcmd);
--
--	/* Wait read complete */
--	mdelay(1);
--
--	/* push down the phy io line */
--	writel(0x0, &regs->mac_mcmd);
--
--	/* and write data */
--	*value = readl(&regs->mac_mrdd);
--
--	return 0;
--}
--
--/*
-- * Write a word to phyxcer
-- */
--static int wemac_phy_write(const char *devname, unsigned char addr,
--			   unsigned char reg, unsigned short value)
--{
--	struct eth_device *dev = eth_get_dev_by_name(devname);
--	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
--
--	/* issue the phy address and reg */
--	writel(addr << 8 | reg, &regs->mac_madr);
--
--	/* pull up the phy io line */
--	writel(0x1, &regs->mac_mcmd);
--
--	/* Wait write complete */
--	mdelay(1);
--
--	/* push down the phy io line */
--	writel(0x0, &regs->mac_mcmd);
--
--	/* and write data */
--	writel(value, &regs->mac_mwtd);
--
--	return 0;
--}
--
--static void emac_setup(struct eth_device *dev)
--{
--	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
--	u32 reg_val;
--	u16 phy_val;
--	u32 duplex_flag;
--
--	/* Set up TX */
--	writel(EMAC_TX_SETUP, &regs->tx_mode);
--
--	/* Set up RX */
--	writel(EMAC_RX_SETUP, &regs->rx_ctl);
--
--	/* Set MAC */
--	/* Set MAC CTL0 */
--	writel(EMAC_MAC_CTL0_SETUP, &regs->mac_ctl0);
--
--	/* Set MAC CTL1 */
--	wemac_phy_read(dev->name, 1, 0, &phy_val);
--	debug("PHY SETUP, reg 0 value: %x\n", phy_val);
--	duplex_flag = !!(phy_val & (1 << 8));
--
--	reg_val = 0;
--	if (duplex_flag)
--		reg_val = (0x1 << 0);
--	writel(EMAC_MAC_CTL1_SETUP | reg_val, &regs->mac_ctl1);
--
--	/* Set up IPGT */
--	writel(EMAC_MAC_IPGT, &regs->mac_ipgt);
--
--	/* Set up IPGR */
--	writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), &regs->mac_ipgr);
--
--	/* Set up Collison window */
--	writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), &regs->mac_clrt);
--
--	/* Set up Max Frame Length */
--	writel(EMAC_MAC_MFL, &regs->mac_maxf);
--}
--
--static void wemac_reset(struct eth_device *dev)
--{
--	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
--
--	debug("resetting device\n");
--
--	/* RESET device */
--	writel(0, &regs->ctl);
--	udelay(200);
--
--	writel(1, &regs->ctl);
--	udelay(200);
--}
--
--static int sunxi_wemac_eth_init(struct eth_device *dev, bd_t *bd)
--{
--	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
--	struct wemac_eth_dev *priv = dev->priv;
--	u16 phy_reg;
--
--	/* Init EMAC */
--
--	/* Flush RX FIFO */
--	setbits_le32(&regs->rx_ctl, 0x8);
--	udelay(1);
--
--	/* Init MAC */
--
--	/* Soft reset MAC */
--	clrbits_le32(&regs->mac_ctl0, 1 << 15);
--
--	/* Set MII clock */
--	clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
--
--	/* Clear RX counter */
--	writel(0x0, &regs->rx_fbc);
--	udelay(1);
--
--	/* Set up EMAC */
--	emac_setup(dev);
--
--	writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
--	       dev->enetaddr[2], &regs->mac_a1);
--	writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
--	       dev->enetaddr[5], &regs->mac_a0);
--
--	mdelay(1);
--
--	wemac_reset(dev);
--
--	/* PHY POWER UP */
--	wemac_phy_read(dev->name, 1, 0, &phy_reg);
--	wemac_phy_write(dev->name, 1, 0, phy_reg & (~(1 << 11)));
--	mdelay(1);
--
--	wemac_phy_read(dev->name, 1, 0, &phy_reg);
--
--	priv->speed = miiphy_speed(dev->name, 0);
--	priv->duplex = miiphy_duplex(dev->name, 0);
--
--	/* Print link status only once */
--	if (!priv->link_printed) {
--		printf("ENET Speed is %d Mbps - %s duplex connection\n",
--		       priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL");
--		priv->link_printed = 1;
--	}
--
--	/* Set EMAC SPEED depend on PHY */
--	clrsetbits_le32(&regs->mac_supp, 1 << 8,
--			((phy_reg & (1 << 13)) >> 13) << 8);
--
--	/* Set duplex depend on phy */
--	clrsetbits_le32(&regs->mac_ctl1, 1 << 0,
--			((phy_reg & (1 << 8)) >> 8) << 0);
--
--	/* Enable RX/TX */
--	setbits_le32(&regs->ctl, 0x7);
--
--	return 0;
--}
--
--static void sunxi_wemac_eth_halt(struct eth_device *dev)
--{
--	/* Nothing to do here */
--}
--
--static int sunxi_wemac_eth_recv(struct eth_device *dev)
--{
--	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
--	struct wemac_rxhdr rxhdr;
--	u32 rxcount;
--	u32 reg_val;
--	int rx_len;
--	int rx_status;
--	int good_packet;
--
--	/* Check packet ready or not */
--
--	/*
--	 * Race warning: The first packet might arrive with
--	 * the interrupts disabled, but the second will fix
--	 */
--	rxcount = readl(&regs->rx_fbc);
--	if (!rxcount) {
--		/* Had one stuck? */
--		rxcount = readl(&regs->rx_fbc);
--		if (!rxcount)
--			return 0;
--	}
--
--	reg_val = readl(&regs->rx_io_data);
--	if (reg_val != 0x0143414d) {
--		/* Disable RX */
--		clrbits_le32(&regs->ctl, 1 << 2);
--
--		/* Flush RX FIFO */
--		setbits_le32(&regs->rx_ctl, 1 << 3);
--		while (readl(&regs->rx_ctl) & (1 << 3))
--			;
--
--		/* Enable RX */
--		setbits_le32(&regs->ctl, 1 << 2);
--
--		return 0;
--	}
--
--	/*
--	 * A packet ready now
--	 * Get status/length
--	 */
--	good_packet = 1;
--
--	wemac_inblk_32bit(&regs->rx_io_data, &rxhdr, sizeof(rxhdr));
--
--	rx_len = rxhdr.rx_len;
--	rx_status = rxhdr.rx_status;
--
--	/* Packet Status check */
--	if (rx_len < 0x40) {
--		good_packet = 0;
--		debug("RX: Bad Packet (runt)\n");
--	}
--
--	/* rx_status is identical to RSR register. */
--	if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) {
--		good_packet = 0;
--		if (rx_status & EMAC_CRCERR)
--			printf("crc error\n");
--		if (rx_status & EMAC_LENERR)
--			printf("length error\n");
--	}
--
--	/* Move data from WEMAC */
--	if (good_packet) {
--		if (rx_len > DMA_CPU_TRRESHOLD) {
--			printf("Received packet is too big (len=%d)\n", rx_len);
--		} else {
--			wemac_inblk_32bit((void *)&regs->rx_io_data,
--					  NetRxPackets[0], rx_len);
--
--			/* Pass to upper layer */
--			NetReceive(NetRxPackets[0], rx_len);
--			return rx_len;
--		}
--	}
--
--	return 0;
--}
--
--static int sunxi_wemac_eth_send(struct eth_device *dev, void *packet, int len)
--{
--	struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
--
--	/* Select channel 0 */
--	writel(0, &regs->tx_ins);
--
--	/* Write packet */
--	wemac_outblk_32bit((void *)&regs->tx_io_data, packet, len);
--
--	/* Set TX len */
--	writel(len, &regs->tx_pl0);
--
--	/* Start translate from fifo to phy */
--	setbits_le32(&regs->tx_ctl0, 1);
--
--	return 0;
--}
--
--int sunxi_wemac_initialize(void)
--{
--	struct sunxi_ccm_reg *const ccm =
--		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
--	struct sunxi_sramc_regs *sram =
--		(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
--	struct eth_device *dev;
--	struct wemac_eth_dev *priv;
--	int pin;
--
--	dev = malloc(sizeof(*dev));
--	if (dev == NULL)
--		return -ENOMEM;
--
--	priv = (struct wemac_eth_dev *)malloc(sizeof(struct wemac_eth_dev));
--	if (!priv) {
--		free(dev);
--		return -ENOMEM;
--	}
--
--	memset(dev, 0, sizeof(*dev));
--	memset(priv, 0, sizeof(struct wemac_eth_dev));
--
--	/* Map SRAM to EMAC */
--	setbits_le32(&sram->ctrl1, 0x5 << 2);
--
--	/* Configure pin mux settings for MII Ethernet */
--	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
--		sunxi_gpio_set_cfgpin(pin, 2);
--
--	/* Set up clock gating */
--	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_EMAC);
--
--	dev->iobase = SUNXI_EMAC_BASE;
--	dev->priv = priv;
--	dev->init = sunxi_wemac_eth_init;
--	dev->halt = sunxi_wemac_eth_halt;
--	dev->send = sunxi_wemac_eth_send;
--	dev->recv = sunxi_wemac_eth_recv;
--	strcpy(dev->name, "wemac");
--
--	eth_register(dev);
--
--	miiphy_register(dev->name, wemac_phy_read, wemac_phy_write);
--
--	return 0;
--}
-diff -ruN u-boot-2014.04/drivers/power/axp152.c u-boot-sunxi/drivers/power/axp152.c
---- u-boot-2014.04/drivers/power/axp152.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/drivers/power/axp152.c	2014-09-06 16:58:36.321953111 +0200
-@@ -0,0 +1,112 @@
-+/*
-+ * (C) Copyright 2012
-+ * Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+#include <common.h>
-+#include <i2c.h>
-+#include <axp152.h>
-+
-+enum axp152_reg {
-+	AXP152_CHIP_VERSION = 0x3,
-+	AXP152_DCDC2_VOLTAGE = 0x23,
-+	AXP152_DCDC3_VOLTAGE = 0x27,
-+	AXP152_DCDC4_VOLTAGE = 0x2B,
-+	AXP152_LDO2_VOLTAGE = 0x2A,
-+	AXP152_SHUTDOWN = 0x32,
-+};
-+
-+#define AXP152_POWEROFF			(1 << 7)
-+
-+static int axp152_write(enum axp152_reg reg, u8 val)
-+{
-+	return i2c_write(0x30, reg, 1, &val, 1);
-+}
-+
-+static int axp152_read(enum axp152_reg reg, u8 *val)
-+{
-+	return i2c_read(0x30, reg, 1, val, 1);
-+}
-+
-+static int axp152_mvolt_to_target(int mvolt, int min, int max, int div)
-+{
-+	if (mvolt < min)
-+		mvolt = min;
-+	else if (mvolt > max)
-+		mvolt = max;
-+
-+	return (mvolt - min) / div;
-+}
-+
-+int axp152_set_dcdc2(int mvolt)
-+{
-+	int rc, target;
-+	u8 current;
-+
-+	target = axp152_mvolt_to_target(mvolt, 700, 2275, 25);
-+
-+	/* Do we really need to be this gentle? It has built-in voltage slope */
-+	while ((rc = axp152_read(AXP152_DCDC2_VOLTAGE, &current)) == 0 &&
-+	       current != target) {
-+		if (current < target)
-+			current++;
-+		else
-+			current--;
-+		rc = axp152_write(AXP152_DCDC2_VOLTAGE, current);
-+		if (rc)
-+			break;
-+	}
-+	return rc;
-+}
-+
-+int axp152_set_dcdc3(int mvolt)
-+{
-+	int target = axp152_mvolt_to_target(mvolt, 700, 3500, 25);
-+
-+	return axp152_write(AXP152_DCDC3_VOLTAGE, target);
-+}
-+
-+int axp152_set_dcdc4(int mvolt)
-+{
-+	int target = axp152_mvolt_to_target(mvolt, 700, 3500, 25);
-+
-+	return axp152_write(AXP152_DCDC4_VOLTAGE, target);
-+}
-+
-+int axp152_set_ldo2(int mvolt)
-+{
-+	int target = axp152_mvolt_to_target(mvolt, 700, 3500, 100);
-+
-+	return axp152_write(AXP152_LDO2_VOLTAGE, target);
-+}
-+
-+void axp152_poweroff(void)
-+{
-+	u8 val;
-+
-+	if (axp152_read(AXP152_SHUTDOWN, &val) != 0)
-+		return;
-+
-+	val |= AXP152_POWEROFF;
-+
-+	if (axp152_write(AXP152_SHUTDOWN, val) != 0)
-+		return;
-+
-+	udelay(10000);	/* wait for power to drain */
-+}
-+
-+int axp152_init(void)
-+{
-+	u8 ver;
-+	int rc;
-+
-+	rc = axp152_read(AXP152_CHIP_VERSION, &ver);
-+	if (rc)
-+		return rc;
-+
-+	if (ver != 0x05)
-+		return -1;
-+
-+	return 0;
-+}
-diff -ruN u-boot-2014.04/drivers/power/axp209.c u-boot-sunxi/drivers/power/axp209.c
---- u-boot-2014.04/drivers/power/axp209.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/drivers/power/axp209.c	2014-09-06 16:58:36.321953111 +0200
-@@ -0,0 +1,180 @@
-+/*
-+ * (C) Copyright 2012
-+ * Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <i2c.h>
-+#include <axp209.h>
-+
-+enum axp209_reg {
-+	AXP209_POWER_STATUS = 0x00,
-+	AXP209_CHIP_VERSION = 0x03,
-+	AXP209_DCDC2_VOLTAGE = 0x23,
-+	AXP209_DCDC3_VOLTAGE = 0x27,
-+	AXP209_LDO24_VOLTAGE = 0x28,
-+	AXP209_LDO3_VOLTAGE = 0x29,
-+	AXP209_IRQ_STATUS5 = 0x4c,
-+	AXP209_SHUTDOWN = 0x32,
-+};
-+
-+#define AXP209_POWER_STATUS_ON_BY_DC	(1 << 0)
-+
-+#define AXP209_IRQ5_PEK_UP		(1 << 6)
-+#define AXP209_IRQ5_PEK_DOWN		(1 << 5)
-+
-+#define AXP209_POWEROFF			(1 << 7)
-+
-+static int axp209_write(enum axp209_reg reg, u8 val)
-+{
-+	return i2c_write(0x34, reg, 1, &val, 1);
-+}
-+
-+static int axp209_read(enum axp209_reg reg, u8 *val)
-+{
-+	return i2c_read(0x34, reg, 1, val, 1);
-+}
-+
-+static int axp209_mvolt_to_cfg(int mvolt, int min, int max, int div)
-+{
-+	if (mvolt < min)
-+		mvolt = min;
-+	else if (mvolt > max)
-+		mvolt = max;
-+
-+	return (mvolt - min) / div;
-+}
-+
-+int axp209_set_dcdc2(int mvolt)
-+{
-+	int cfg, rc;
-+	u8 current;
-+
-+	cfg = axp209_mvolt_to_cfg(mvolt, 700, 2275, 25);
-+
-+	/* Do we really need to be this gentle? It has built-in voltage slope */
-+	while ((rc = axp209_read(AXP209_DCDC2_VOLTAGE, &current)) == 0 &&
-+	       current != cfg) {
-+		if (current < cfg)
-+			current++;
-+		else
-+			current--;
-+
-+		rc = axp209_write(AXP209_DCDC2_VOLTAGE, current);
-+		if (rc)
-+			break;
-+	}
-+
-+	return rc;
-+}
-+
-+int axp209_set_dcdc3(int mvolt)
-+{
-+	int cfg = axp209_mvolt_to_cfg(mvolt, 700, 3500, 25);
-+
-+	return axp209_write(AXP209_DCDC3_VOLTAGE, cfg);
-+}
-+
-+int axp209_set_ldo2(int mvolt)
-+{
-+	int rc, cfg;
-+	u8 reg;
-+
-+	cfg = axp209_mvolt_to_cfg(mvolt, 1800, 3300, 100);
-+
-+	rc = axp209_read(AXP209_LDO24_VOLTAGE, &reg);
-+	if (rc)
-+		return rc;
-+
-+	/* LDO2 configuration is in upper 4 bits */
-+	reg = (reg & 0x0f) | (cfg << 4);
-+	return axp209_write(AXP209_LDO24_VOLTAGE, reg);
-+}
-+
-+int axp209_set_ldo3(int mvolt)
-+{
-+	int cfg = axp209_mvolt_to_cfg(mvolt, 700, 2275, 25);
-+
-+	if (mvolt == -1)
-+		cfg = 0x80;	/* determined by LDO3IN pin */
-+
-+	return axp209_write(AXP209_LDO3_VOLTAGE, cfg);
-+}
-+
-+int axp209_set_ldo4(int mvolt)
-+{
-+	int cfg, rc;
-+	static const int vindex[] = {
-+		1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2500,
-+		2700, 2800, 3000, 3100, 3200, 3300
-+	};
-+	u8 reg;
-+
-+	/* Translate mvolt to register cfg value, requested <= selected */
-+	for (cfg = 15; vindex[cfg] > mvolt && cfg > 0; cfg--);
-+
-+	rc = axp209_read(AXP209_LDO24_VOLTAGE, &reg);
-+	if (rc)
-+		return rc;
-+
-+	/* LDO4 configuration is in lower 4 bits */
-+	reg = (reg & 0xf0) | (cfg << 0);
-+	return axp209_write(AXP209_LDO24_VOLTAGE, reg);
-+}
-+
-+void axp209_poweroff(void)
-+{
-+	u8 val;
-+
-+	if (axp209_read(AXP209_SHUTDOWN, &val) != 0)
-+		return;
-+
-+	val |= AXP209_POWEROFF;
-+
-+	if (axp209_write(AXP209_SHUTDOWN, val) != 0)
-+		return;
-+
-+	udelay(10000);		/* wait for power to drain */
-+}
-+
-+int axp209_init(void)
-+{
-+	u8 ver;
-+	int rc;
-+
-+	rc = axp209_read(AXP209_CHIP_VERSION, &ver);
-+	if (rc)
-+		return rc;
-+
-+	/* Low 4 bits is chip version */
-+	ver &= 0x0f;
-+
-+	if (ver != 0x1)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+int axp209_poweron_by_dc(void)
-+{
-+	u8 v;
-+
-+	if (axp209_read(AXP209_POWER_STATUS, &v))
-+		return 0;
-+
-+	return (v & AXP209_POWER_STATUS_ON_BY_DC);
-+}
-+
-+int axp209_power_button(void)
-+{
-+	u8 v;
-+
-+	if (axp209_read(AXP209_IRQ_STATUS5, &v))
-+		return 0;
-+
-+	axp209_write(AXP209_IRQ_STATUS5, AXP209_IRQ5_PEK_DOWN);
-+
-+	return v & AXP209_IRQ5_PEK_DOWN;
-+}
-diff -ruN u-boot-2014.04/drivers/power/axp221.c u-boot-sunxi/drivers/power/axp221.c
---- u-boot-2014.04/drivers/power/axp221.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/drivers/power/axp221.c	2014-09-06 16:58:36.321953111 +0200
-@@ -0,0 +1,73 @@
-+/*
-+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <errno.h>
-+#include <asm/arch/p2wi.h>
-+#include <axp221.h>
-+
-+int axp221_set_dcdc1(unsigned int mvolt)
-+{
-+	return p2wi_write(AXP221_DCDC1_CTRL, (mvolt - 1600) / 100);
-+}
-+
-+int axp221_set_dcdc2(unsigned int mvolt)
-+{
-+	return p2wi_write(AXP221_DCDC2_CTRL, (mvolt - 600) / 20);
-+}
-+
-+int axp221_set_dcdc3(unsigned int mvolt)
-+{
-+	return p2wi_write(AXP221_DCDC3_CTRL, (mvolt - 600) / 20);
-+}
-+
-+int axp221_set_dcdc4(unsigned int mvolt)
-+{
-+	return p2wi_write(AXP221_DCDC4_CTRL, (mvolt - 600) / 20);
-+}
-+
-+int axp221_set_dcdc5(unsigned int mvolt)
-+{
-+	return p2wi_write(AXP221_DCDC5_CTRL, (mvolt - 600) / 20);
-+}
-+
-+int axp221_set_dldo1(unsigned int mvolt)
-+{
-+	int ret;
-+	u8 val;
-+
-+	ret = p2wi_write(AXP221_DLDO1_CTRL, (mvolt - 700) / 100);
-+	if (ret)
-+		return ret;
-+
-+	ret = p2wi_read(AXP221_OUTPUT_CTRL2, &val);
-+	if (ret)
-+		return ret;
-+
-+	val |= 1 << 3;
-+	return p2wi_write(AXP221_OUTPUT_CTRL2, val);
-+}
-+
-+int axp221_init(void)
-+{
-+	u8 axp_chip_id;
-+	int ret;
-+
-+	p2wi_init();
-+	ret = p2wi_set_pmu_address(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
-+				   AXP221_INIT_DATA);
-+	if (ret)
-+		return ret;
-+
-+	ret = p2wi_read(AXP221_CHIP_ID, &axp_chip_id);
-+	if (ret)
-+		return ret;
-+
-+	if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17))
-+		return -ENODEV;
-+
-+	return 0;
-+}
-diff -ruN u-boot-2014.04/drivers/power/Makefile u-boot-sunxi/drivers/power/Makefile
---- u-boot-2014.04/drivers/power/Makefile	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/drivers/power/Makefile	2014-09-06 16:58:36.321953111 +0200
-@@ -5,6 +5,9 @@
- # SPDX-License-Identifier:	GPL-2.0+
- #
- 
-+obj-$(CONFIG_AXP152_POWER)	+= axp152.o
-+obj-$(CONFIG_AXP209_POWER)	+= axp209.o
-+obj-$(CONFIG_AXP221_POWER)	+= axp221.o
- obj-$(CONFIG_EXYNOS_TMU)	+= exynos-tmu.o
- obj-$(CONFIG_FTPMU010_POWER)	+= ftpmu010.o
- obj-$(CONFIG_TPS6586X_POWER)	+= tps6586x.o
-diff -ruN u-boot-2014.04/drivers/serial/arm_dcc.c u-boot-sunxi/drivers/serial/arm_dcc.c
---- u-boot-2014.04/drivers/serial/arm_dcc.c	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/drivers/serial/arm_dcc.c	2014-09-06 16:58:36.329953111 +0200
-@@ -29,7 +29,7 @@
- #include <common.h>
- #include <serial.h>
- 
--#if defined(CONFIG_CPU_V6)
-+#if defined(CONFIG_CPU_V6) || 1
- /*
-  * ARMV6
-  */
-diff -ruN u-boot-2014.04/.git/config u-boot-sunxi/.git/config
---- u-boot-2014.04/.git/config	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/config	2014-09-06 16:58:35.001953150 +0200
-@@ -0,0 +1,11 @@
-+[core]
-+	repositoryformatversion = 0
-+	filemode = true
-+	bare = false
-+	logallrefupdates = true
-+[remote "origin"]
-+	fetch = +refs/heads/*:refs/remotes/origin/*
-+	url = https://github.com/linux-sunxi/u-boot-sunxi
-+[branch "sunxi"]
-+	remote = origin
-+	merge = refs/heads/sunxi
-diff -ruN u-boot-2014.04/.git/description u-boot-sunxi/.git/description
---- u-boot-2014.04/.git/description	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/description	2014-09-06 16:58:09.553953909 +0200
-@@ -0,0 +1 @@
-+Unnamed repository; edit this file 'description' to name the repository.
-diff -ruN u-boot-2014.04/.git/HEAD u-boot-sunxi/.git/HEAD
---- u-boot-2014.04/.git/HEAD	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/HEAD	2014-09-06 16:58:35.001953150 +0200
-@@ -0,0 +1 @@
-+ref: refs/heads/sunxi
-diff -ruN u-boot-2014.04/.git/hooks/applypatch-msg.sample u-boot-sunxi/.git/hooks/applypatch-msg.sample
---- u-boot-2014.04/.git/hooks/applypatch-msg.sample	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/hooks/applypatch-msg.sample	2014-09-06 16:58:09.553953909 +0200
-@@ -0,0 +1,15 @@
-+#!/bin/sh
-+#
-+# An example hook script to check the commit log message taken by
-+# applypatch from an e-mail message.
-+#
-+# The hook should exit with non-zero status after issuing an
-+# appropriate message if it wants to stop the commit.  The hook is
-+# allowed to edit the commit message file.
-+#
-+# To enable this hook, rename this file to "applypatch-msg".
-+
-+. git-sh-setup
-+test -x "$GIT_DIR/hooks/commit-msg" &&
-+	exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"}
-+:
-diff -ruN u-boot-2014.04/.git/hooks/commit-msg.sample u-boot-sunxi/.git/hooks/commit-msg.sample
---- u-boot-2014.04/.git/hooks/commit-msg.sample	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/hooks/commit-msg.sample	2014-09-06 16:58:09.553953909 +0200
-@@ -0,0 +1,24 @@
-+#!/bin/sh
-+#
-+# An example hook script to check the commit log message.
-+# Called by "git commit" with one argument, the name of the file
-+# that has the commit message.  The hook should exit with non-zero
-+# status after issuing an appropriate message if it wants to stop the
-+# commit.  The hook is allowed to edit the commit message file.
-+#
-+# To enable this hook, rename this file to "commit-msg".
-+
-+# Uncomment the below to add a Signed-off-by line to the message.
-+# Doing this in a hook is a bad idea in general, but the prepare-commit-msg
-+# hook is more suited to it.
-+#
-+# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
-+# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
-+
-+# This example catches duplicate Signed-off-by lines.
-+
-+test "" = "$(grep '^Signed-off-by: ' "$1" |
-+	 sort | uniq -c | sed -e '/^[ 	]*1[ 	]/d')" || {
-+	echo >&2 Duplicate Signed-off-by lines.
-+	exit 1
-+}
-diff -ruN u-boot-2014.04/.git/hooks/post-update.sample u-boot-sunxi/.git/hooks/post-update.sample
---- u-boot-2014.04/.git/hooks/post-update.sample	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/hooks/post-update.sample	2014-09-06 16:58:09.553953909 +0200
-@@ -0,0 +1,8 @@
-+#!/bin/sh
-+#
-+# An example hook script to prepare a packed repository for use over
-+# dumb transports.
-+#
-+# To enable this hook, rename this file to "post-update".
-+
-+exec git update-server-info
-diff -ruN u-boot-2014.04/.git/hooks/pre-applypatch.sample u-boot-sunxi/.git/hooks/pre-applypatch.sample
---- u-boot-2014.04/.git/hooks/pre-applypatch.sample	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/hooks/pre-applypatch.sample	2014-09-06 16:58:09.553953909 +0200
-@@ -0,0 +1,14 @@
-+#!/bin/sh
-+#
-+# An example hook script to verify what is about to be committed
-+# by applypatch from an e-mail message.
-+#
-+# The hook should exit with non-zero status after issuing an
-+# appropriate message if it wants to stop the commit.
-+#
-+# To enable this hook, rename this file to "pre-applypatch".
-+
-+. git-sh-setup
-+test -x "$GIT_DIR/hooks/pre-commit" &&
-+	exec "$GIT_DIR/hooks/pre-commit" ${1+"$@"}
-+:
-diff -ruN u-boot-2014.04/.git/hooks/pre-commit.sample u-boot-sunxi/.git/hooks/pre-commit.sample
---- u-boot-2014.04/.git/hooks/pre-commit.sample	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/hooks/pre-commit.sample	2014-09-06 16:58:09.553953909 +0200
-@@ -0,0 +1,50 @@
-+#!/bin/sh
-+#
-+# An example hook script to verify what is about to be committed.
-+# Called by "git commit" with no arguments.  The hook should
-+# exit with non-zero status after issuing an appropriate message if
-+# it wants to stop the commit.
-+#
-+# To enable this hook, rename this file to "pre-commit".
-+
-+if git rev-parse --verify HEAD >/dev/null 2>&1
-+then
-+	against=HEAD
-+else
-+	# Initial commit: diff against an empty tree object
-+	against=4b825dc642cb6eb9a060e54bf8d69288fbee4904
-+fi
-+
-+# If you want to allow non-ascii filenames set this variable to true.
-+allownonascii=$(git config hooks.allownonascii)
-+
-+# Redirect output to stderr.
-+exec 1>&2
-+
-+# Cross platform projects tend to avoid non-ascii filenames; prevent
-+# them from being added to the repository. We exploit the fact that the
-+# printable range starts at the space character and ends with tilde.
-+if [ "$allownonascii" != "true" ] &&
-+	# Note that the use of brackets around a tr range is ok here, (it's
-+	# even required, for portability to Solaris 10's /usr/bin/tr), since
-+	# the square bracket bytes happen to fall in the designated range.
-+	test $(git diff --cached --name-only --diff-filter=A -z $against |
-+	  LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0
-+then
-+	echo "Error: Attempt to add a non-ascii file name."
-+	echo
-+	echo "This can cause problems if you want to work"
-+	echo "with people on other platforms."
-+	echo
-+	echo "To be portable it is advisable to rename the file ..."
-+	echo
-+	echo "If you know what you are doing you can disable this"
-+	echo "check using:"
-+	echo
-+	echo "  git config hooks.allownonascii true"
-+	echo
-+	exit 1
-+fi
-+
-+# If there are whitespace errors, print the offending file names and fail.
-+exec git diff-index --check --cached $against --
-diff -ruN u-boot-2014.04/.git/hooks/prepare-commit-msg.sample u-boot-sunxi/.git/hooks/prepare-commit-msg.sample
---- u-boot-2014.04/.git/hooks/prepare-commit-msg.sample	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/hooks/prepare-commit-msg.sample	2014-09-06 16:58:09.553953909 +0200
-@@ -0,0 +1,36 @@
-+#!/bin/sh
-+#
-+# An example hook script to prepare the commit log message.
-+# Called by "git commit" with the name of the file that has the
-+# commit message, followed by the description of the commit
-+# message's source.  The hook's purpose is to edit the commit
-+# message file.  If the hook fails with a non-zero status,
-+# the commit is aborted.
-+#
-+# To enable this hook, rename this file to "prepare-commit-msg".
-+
-+# This hook includes three examples.  The first comments out the
-+# "Conflicts:" part of a merge commit.
-+#
-+# The second includes the output of "git diff --name-status -r"
-+# into the message, just before the "git status" output.  It is
-+# commented because it doesn't cope with --amend or with squashed
-+# commits.
-+#
-+# The third example adds a Signed-off-by line to the message, that can
-+# still be edited.  This is rarely a good idea.
-+
-+case "$2,$3" in
-+  merge,)
-+    /usr/bin/perl -i.bak -ne 's/^/# /, s/^# #/#/ if /^Conflicts/ .. /#/; print' "$1" ;;
-+
-+# ,|template,)
-+#   /usr/bin/perl -i.bak -pe '
-+#      print "\n" . `git diff --cached --name-status -r`
-+#	 if /^#/ && $first++ == 0' "$1" ;;
-+
-+  *) ;;
-+esac
-+
-+# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
-+# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
-diff -ruN u-boot-2014.04/.git/hooks/pre-rebase.sample u-boot-sunxi/.git/hooks/pre-rebase.sample
---- u-boot-2014.04/.git/hooks/pre-rebase.sample	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/hooks/pre-rebase.sample	2014-09-06 16:58:09.553953909 +0200
-@@ -0,0 +1,169 @@
-+#!/bin/sh
-+#
-+# Copyright (c) 2006, 2008 Junio C Hamano
-+#
-+# The "pre-rebase" hook is run just before "git rebase" starts doing
-+# its job, and can prevent the command from running by exiting with
-+# non-zero status.
-+#
-+# The hook is called with the following parameters:
-+#
-+# $1 -- the upstream the series was forked from.
-+# $2 -- the branch being rebased (or empty when rebasing the current branch).
-+#
-+# This sample shows how to prevent topic branches that are already
-+# merged to 'next' branch from getting rebased, because allowing it
-+# would result in rebasing already published history.
-+
-+publish=next
-+basebranch="$1"
-+if test "$#" = 2
-+then
-+	topic="refs/heads/$2"
-+else
-+	topic=`git symbolic-ref HEAD` ||
-+	exit 0 ;# we do not interrupt rebasing detached HEAD
-+fi
-+
-+case "$topic" in
-+refs/heads/??/*)
-+	;;
-+*)
-+	exit 0 ;# we do not interrupt others.
-+	;;
-+esac
-+
-+# Now we are dealing with a topic branch being rebased
-+# on top of master.  Is it OK to rebase it?
-+
-+# Does the topic really exist?
-+git show-ref -q "$topic" || {
-+	echo >&2 "No such branch $topic"
-+	exit 1
-+}
-+
-+# Is topic fully merged to master?
-+not_in_master=`git rev-list --pretty=oneline ^master "$topic"`
-+if test -z "$not_in_master"
-+then
-+	echo >&2 "$topic is fully merged to master; better remove it."
-+	exit 1 ;# we could allow it, but there is no point.
-+fi
-+
-+# Is topic ever merged to next?  If so you should not be rebasing it.
-+only_next_1=`git rev-list ^master "^$topic" ${publish} | sort`
-+only_next_2=`git rev-list ^master           ${publish} | sort`
-+if test "$only_next_1" = "$only_next_2"
-+then
-+	not_in_topic=`git rev-list "^$topic" master`
-+	if test -z "$not_in_topic"
-+	then
-+		echo >&2 "$topic is already up-to-date with master"
-+		exit 1 ;# we could allow it, but there is no point.
-+	else
-+		exit 0
-+	fi
-+else
-+	not_in_next=`git rev-list --pretty=oneline ^${publish} "$topic"`
-+	/usr/bin/perl -e '
-+		my $topic = $ARGV[0];
-+		my $msg = "* $topic has commits already merged to public branch:\n";
-+		my (%not_in_next) = map {
-+			/^([0-9a-f]+) /;
-+			($1 => 1);
-+		} split(/\n/, $ARGV[1]);
-+		for my $elem (map {
-+				/^([0-9a-f]+) (.*)$/;
-+				[$1 => $2];
-+			} split(/\n/, $ARGV[2])) {
-+			if (!exists $not_in_next{$elem->[0]}) {
-+				if ($msg) {
-+					print STDERR $msg;
-+					undef $msg;
-+				}
-+				print STDERR " $elem->[1]\n";
-+			}
-+		}
-+	' "$topic" "$not_in_next" "$not_in_master"
-+	exit 1
-+fi
-+
-+<<\DOC_END
-+
-+This sample hook safeguards topic branches that have been
-+published from being rewound.
-+
-+The workflow assumed here is:
-+
-+ * Once a topic branch forks from "master", "master" is never
-+   merged into it again (either directly or indirectly).
-+
-+ * Once a topic branch is fully cooked and merged into "master",
-+   it is deleted.  If you need to build on top of it to correct
-+   earlier mistakes, a new topic branch is created by forking at
-+   the tip of the "master".  This is not strictly necessary, but
-+   it makes it easier to keep your history simple.
-+
-+ * Whenever you need to test or publish your changes to topic
-+   branches, merge them into "next" branch.
-+
-+The script, being an example, hardcodes the publish branch name
-+to be "next", but it is trivial to make it configurable via
-+$GIT_DIR/config mechanism.
-+
-+With this workflow, you would want to know:
-+
-+(1) ... if a topic branch has ever been merged to "next".  Young
-+    topic branches can have stupid mistakes you would rather
-+    clean up before publishing, and things that have not been
-+    merged into other branches can be easily rebased without
-+    affecting other people.  But once it is published, you would
-+    not want to rewind it.
-+
-+(2) ... if a topic branch has been fully merged to "master".
-+    Then you can delete it.  More importantly, you should not
-+    build on top of it -- other people may already want to
-+    change things related to the topic as patches against your
-+    "master", so if you need further changes, it is better to
-+    fork the topic (perhaps with the same name) afresh from the
-+    tip of "master".
-+
-+Let's look at this example:
-+
-+		   o---o---o---o---o---o---o---o---o---o "next"
-+		  /       /           /           /
-+		 /   a---a---b A     /           /
-+		/   /               /           /
-+	       /   /   c---c---c---c B         /
-+	      /   /   /             \         /
-+	     /   /   /   b---b C     \       /
-+	    /   /   /   /             \     /
-+    ---o---o---o---o---o---o---o---o---o---o---o "master"
-+
-+
-+A, B and C are topic branches.
-+
-+ * A has one fix since it was merged up to "next".
-+
-+ * B has finished.  It has been fully merged up to "master" and "next",
-+   and is ready to be deleted.
-+
-+ * C has not merged to "next" at all.
-+
-+We would want to allow C to be rebased, refuse A, and encourage
-+B to be deleted.
-+
-+To compute (1):
-+
-+	git rev-list ^master ^topic next
-+	git rev-list ^master        next
-+
-+	if these match, topic has not merged in next at all.
-+
-+To compute (2):
-+
-+	git rev-list master..topic
-+
-+	if this is empty, it is fully merged to "master".
-+
-+DOC_END
-diff -ruN u-boot-2014.04/.git/hooks/update.sample u-boot-sunxi/.git/hooks/update.sample
---- u-boot-2014.04/.git/hooks/update.sample	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/hooks/update.sample	2014-09-06 16:58:09.553953909 +0200
-@@ -0,0 +1,128 @@
-+#!/bin/sh
-+#
-+# An example hook script to blocks unannotated tags from entering.
-+# Called by "git receive-pack" with arguments: refname sha1-old sha1-new
-+#
-+# To enable this hook, rename this file to "update".
-+#
-+# Config
-+# ------
-+# hooks.allowunannotated
-+#   This boolean sets whether unannotated tags will be allowed into the
-+#   repository.  By default they won't be.
-+# hooks.allowdeletetag
-+#   This boolean sets whether deleting tags will be allowed in the
-+#   repository.  By default they won't be.
-+# hooks.allowmodifytag
-+#   This boolean sets whether a tag may be modified after creation. By default
-+#   it won't be.
-+# hooks.allowdeletebranch
-+#   This boolean sets whether deleting branches will be allowed in the
-+#   repository.  By default they won't be.
-+# hooks.denycreatebranch
-+#   This boolean sets whether remotely creating branches will be denied
-+#   in the repository.  By default this is allowed.
-+#
-+
-+# --- Command line
-+refname="$1"
-+oldrev="$2"
-+newrev="$3"
-+
-+# --- Safety check
-+if [ -z "$GIT_DIR" ]; then
-+	echo "Don't run this script from the command line." >&2
-+	echo " (if you want, you could supply GIT_DIR then run" >&2
-+	echo "  $0 <ref> <oldrev> <newrev>)" >&2
-+	exit 1
-+fi
-+
-+if [ -z "$refname" -o -z "$oldrev" -o -z "$newrev" ]; then
-+	echo "Usage: $0 <ref> <oldrev> <newrev>" >&2
-+	exit 1
-+fi
-+
-+# --- Config
-+allowunannotated=$(git config --bool hooks.allowunannotated)
-+allowdeletebranch=$(git config --bool hooks.allowdeletebranch)
-+denycreatebranch=$(git config --bool hooks.denycreatebranch)
-+allowdeletetag=$(git config --bool hooks.allowdeletetag)
-+allowmodifytag=$(git config --bool hooks.allowmodifytag)
-+
-+# check for no description
-+projectdesc=$(sed -e '1q' "$GIT_DIR/description")
-+case "$projectdesc" in
-+"Unnamed repository"* | "")
-+	echo "*** Project description file hasn't been set" >&2
-+	exit 1
-+	;;
-+esac
-+
-+# --- Check types
-+# if $newrev is 0000...0000, it's a commit to delete a ref.
-+zero="0000000000000000000000000000000000000000"
-+if [ "$newrev" = "$zero" ]; then
-+	newrev_type=delete
-+else
-+	newrev_type=$(git cat-file -t $newrev)
-+fi
-+
-+case "$refname","$newrev_type" in
-+	refs/tags/*,commit)
-+		# un-annotated tag
-+		short_refname=${refname##refs/tags/}
-+		if [ "$allowunannotated" != "true" ]; then
-+			echo "*** The un-annotated tag, $short_refname, is not allowed in this repository" >&2
-+			echo "*** Use 'git tag [ -a | -s ]' for tags you want to propagate." >&2
-+			exit 1
-+		fi
-+		;;
-+	refs/tags/*,delete)
-+		# delete tag
-+		if [ "$allowdeletetag" != "true" ]; then
-+			echo "*** Deleting a tag is not allowed in this repository" >&2
-+			exit 1
-+		fi
-+		;;
-+	refs/tags/*,tag)
-+		# annotated tag
-+		if [ "$allowmodifytag" != "true" ] && git rev-parse $refname > /dev/null 2>&1
-+		then
-+			echo "*** Tag '$refname' already exists." >&2
-+			echo "*** Modifying a tag is not allowed in this repository." >&2
-+			exit 1
-+		fi
-+		;;
-+	refs/heads/*,commit)
-+		# branch
-+		if [ "$oldrev" = "$zero" -a "$denycreatebranch" = "true" ]; then
-+			echo "*** Creating a branch is not allowed in this repository" >&2
-+			exit 1
-+		fi
-+		;;
-+	refs/heads/*,delete)
-+		# delete branch
-+		if [ "$allowdeletebranch" != "true" ]; then
-+			echo "*** Deleting a branch is not allowed in this repository" >&2
-+			exit 1
-+		fi
-+		;;
-+	refs/remotes/*,commit)
-+		# tracking branch
-+		;;
-+	refs/remotes/*,delete)
-+		# delete tracking branch
-+		if [ "$allowdeletebranch" != "true" ]; then
-+			echo "*** Deleting a tracking branch is not allowed in this repository" >&2
-+			exit 1
-+		fi
-+		;;
-+	*)
-+		# Anything else (is there anything else?)
-+		echo "*** Update hook: unknown type of update to ref $refname of type $newrev_type" >&2
-+		exit 1
-+		;;
-+esac
-+
-+# --- Finished
-+exit 0
-Binary files u-boot-2014.04/.git/index and u-boot-sunxi/.git/index differ
-diff -ruN u-boot-2014.04/.git/info/exclude u-boot-sunxi/.git/info/exclude
---- u-boot-2014.04/.git/info/exclude	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/info/exclude	2014-09-06 16:58:09.553953909 +0200
-@@ -0,0 +1,6 @@
-+# git ls-files --others --exclude-from=.git/info/exclude
-+# Lines that start with '#' are comments.
-+# For a project mostly in C, the following would be a good set of
-+# exclude patterns (uncomment them if you want to use them):
-+# *.[oa]
-+# *~
-diff -ruN u-boot-2014.04/.git/logs/HEAD u-boot-sunxi/.git/logs/HEAD
---- u-boot-2014.04/.git/logs/HEAD	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/logs/HEAD	2014-09-06 16:58:35.001953150 +0200
-@@ -0,0 +1 @@
-+0000000000000000000000000000000000000000 509d96d4f1f602d62d36db660973249e16f9d088 Zoltan HERPAI <wigyori@uid0.hu> 1410015515 +0200	clone: from https://github.com/linux-sunxi/u-boot-sunxi
-diff -ruN u-boot-2014.04/.git/logs/refs/heads/sunxi u-boot-sunxi/.git/logs/refs/heads/sunxi
---- u-boot-2014.04/.git/logs/refs/heads/sunxi	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/logs/refs/heads/sunxi	2014-09-06 16:58:35.001953150 +0200
-@@ -0,0 +1 @@
-+0000000000000000000000000000000000000000 509d96d4f1f602d62d36db660973249e16f9d088 Zoltan HERPAI <wigyori@uid0.hu> 1410015515 +0200	clone: from https://github.com/linux-sunxi/u-boot-sunxi
-diff -ruN u-boot-2014.04/.git/logs/refs/remotes/origin/HEAD u-boot-sunxi/.git/logs/refs/remotes/origin/HEAD
---- u-boot-2014.04/.git/logs/refs/remotes/origin/HEAD	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/logs/refs/remotes/origin/HEAD	2014-09-06 16:58:35.001953150 +0200
-@@ -0,0 +1 @@
-+0000000000000000000000000000000000000000 509d96d4f1f602d62d36db660973249e16f9d088 Zoltan HERPAI <wigyori@uid0.hu> 1410015515 +0200	clone: from https://github.com/linux-sunxi/u-boot-sunxi
-Binary files u-boot-2014.04/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.idx and u-boot-sunxi/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.idx differ
-Binary files u-boot-2014.04/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.pack and u-boot-sunxi/.git/objects/pack/pack-67611423d2b8399a45fe3205d396caff441c8135.pack differ
-diff -ruN u-boot-2014.04/.git/packed-refs u-boot-sunxi/.git/packed-refs
---- u-boot-2014.04/.git/packed-refs	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/packed-refs	2014-09-06 16:58:35.001953150 +0200
-@@ -0,0 +1,25 @@
-+# pack-refs with: peeled 
-+3212c6fd4beaa14a21a57e5241022702c986f82e refs/remotes/origin/lichee-dev
-+c0860ba179bc0cf016831ceeeacd0dd4e287a860 refs/remotes/origin/lichee-dev-a20
-+1076d3bdd67db39f34bc91857c636525874441ae refs/remotes/origin/lichee/lichee-dev
-+40b4fba701c1824cc60c7ab966f4a5dd674e947d refs/remotes/origin/lichee/lichee-dev-ICS
-+cf54463fd782c690cf790ca35b5a15504b57c287 refs/remotes/origin/lichee/lichee-dev-mmc
-+218f643881c0dabd7e40cdb21a757416fa80afb2 refs/remotes/origin/old/sunxi-current
-+509d96d4f1f602d62d36db660973249e16f9d088 refs/remotes/origin/sunxi
-+43fb1236c3330676f49220cc1dfc235eb0558e4c refs/remotes/origin/sunxi-patchqueue
-+80fd9a5c5b87ba2f48f4a71b666839870e780be6 refs/remotes/origin/wip/a20
-+27113637710a574d1fb6325817ffa9ced7afe019 refs/tags/v2011.09-sun4i
-+^22b38fa5c0348ac4f285f038999f9a617f98e73a
-+9ba56441491542cd06b30c514e544d96b29ef801 refs/tags/v2011.09-sun4i-20120808
-+88eacf3372855579760ba6bc8fa3e0d4e53fdef8 refs/tags/v2012.10-sunxi
-+1ae18d97d24c5d6dd4cb7949d8e5fb602728601c refs/tags/v2013.01-sunxi
-+fc40799c144d035c595c4abe3032a03be8f0e2c4 refs/tags/v2013.01.01-sunxi
-+90c8c0c88362d1e39bb1433f04b9a21bb1c74e45 refs/tags/v2013.04-sunxi
-+57ff4519ba0f47f1647f7def5864ae4c9ef3e6a0 refs/tags/v2013.07-rc1-sunxi
-+c416374795b584f025a80b1f81db215456567155 refs/tags/v2013.07-sunxi
-+8969c6f654248ececdfcf05eb51de9a8bc0a8703 refs/tags/v2013.07-sunxi.2
-+88b1df7ee9c15c821a2209791f513b21596f21b4 refs/tags/v2013.07-sunxi.3
-+569c37da7dfd4ed93b6e8b5993df760b9ed18c8d refs/tags/v2013.07-sunxi.4
-+7a63a6882876b76e47746c1254e8cd1120a52b0d refs/tags/v2013.10-rc1-sunxi
-+951e509384822e39149c22f44cde6a01f5105c40 refs/tags/v2013.10-rc2-sunxi
-+09ef3a640a3eb58e66eedcf239193e2ab548e730 refs/tags/v2013.10-sunxi
-diff -ruN u-boot-2014.04/.git/refs/heads/sunxi u-boot-sunxi/.git/refs/heads/sunxi
---- u-boot-2014.04/.git/refs/heads/sunxi	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/refs/heads/sunxi	2014-09-06 16:58:35.001953150 +0200
-@@ -0,0 +1 @@
-+509d96d4f1f602d62d36db660973249e16f9d088
-diff -ruN u-boot-2014.04/.git/refs/remotes/origin/HEAD u-boot-sunxi/.git/refs/remotes/origin/HEAD
---- u-boot-2014.04/.git/refs/remotes/origin/HEAD	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/.git/refs/remotes/origin/HEAD	2014-09-06 16:58:35.001953150 +0200
-@@ -0,0 +1 @@
-+ref: refs/remotes/origin/sunxi
-diff -ruN u-boot-2014.04/include/axp152.h u-boot-sunxi/include/axp152.h
---- u-boot-2014.04/include/axp152.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/include/axp152.h	2014-09-06 16:58:36.397953109 +0200
-@@ -0,0 +1,11 @@
-+/*
-+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+int axp152_set_dcdc2(int mvolt);
-+int axp152_set_dcdc3(int mvolt);
-+int axp152_set_dcdc4(int mvolt);
-+int axp152_set_ldo2(int mvolt);
-+void axp152_poweroff(void);
-+int axp152_init(void);
-diff -ruN u-boot-2014.04/include/axp209.h u-boot-sunxi/include/axp209.h
---- u-boot-2014.04/include/axp209.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/include/axp209.h	2014-09-06 16:58:36.397953109 +0200
-@@ -0,0 +1,15 @@
-+/*
-+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+extern int axp209_set_dcdc2(int mvolt);
-+extern int axp209_set_dcdc3(int mvolt);
-+extern int axp209_set_ldo2(int mvolt);
-+extern int axp209_set_ldo3(int mvolt);
-+extern int axp209_set_ldo4(int mvolt);
-+extern void axp209_poweroff(void);
-+extern int axp209_init(void);
-+extern int axp209_poweron_by_dc(void);
-+extern int axp209_power_button(void);
-diff -ruN u-boot-2014.04/include/axp221.h u-boot-sunxi/include/axp221.h
---- u-boot-2014.04/include/axp221.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/include/axp221.h	2014-09-06 16:58:36.397953109 +0200
-@@ -0,0 +1,30 @@
-+/*
-+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
-+ *
-+ * X-Powers AXP221 Power Management IC driver
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#define AXP221_CHIP_ADDR 0x68
-+#define AXP221_CTRL_ADDR 0x3e
-+#define AXP221_INIT_DATA 0x3e
-+
-+#define AXP221_CHIP_ID		0x03
-+#define AXP221_OUTPUT_CTRL1	0x10
-+#define AXP221_OUTPUT_CTRL2	0x12
-+#define AXP221_OUTPUT_CTRL3	0x13
-+#define AXP221_DLDO1_CTRL	0x15
-+#define AXP221_DCDC1_CTRL	0x21
-+#define AXP221_DCDC2_CTRL	0x22
-+#define AXP221_DCDC3_CTRL	0x23
-+#define AXP221_DCDC4_CTRL	0x24
-+#define AXP221_DCDC5_CTRL	0x25
-+
-+int axp221_set_dcdc1(unsigned int mvolt);
-+int axp221_set_dcdc2(unsigned int mvolt);
-+int axp221_set_dcdc3(unsigned int mvolt);
-+int axp221_set_dcdc4(unsigned int mvolt);
-+int axp221_set_dcdc5(unsigned int mvolt);
-+int axp221_set_dldo1(unsigned int mvolt);
-+int axp221_init(void);
-diff -ruN u-boot-2014.04/include/config_fallbacks.h u-boot-sunxi/include/config_fallbacks.h
---- u-boot-2014.04/include/config_fallbacks.h	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/include/config_fallbacks.h	2014-09-06 16:58:36.401953108 +0200
-@@ -55,6 +55,10 @@
- #define HAVE_BLOCK_DEVICE
- #endif
- 
-+#ifndef CONFIG_SYS_BOARD_NAME
-+#define CONFIG_SYS_BOARD_NAME CONFIG_SYS_TARGET
-+#endif
-+
- #if (defined(CONFIG_PARTITION_UUIDS) || \
- 	defined(CONFIG_EFI_PARTITION) || \
- 	defined(CONFIG_RANDOM_UUID) || \
-diff -ruN u-boot-2014.04/include/configs/sun4i.h u-boot-sunxi/include/configs/sun4i.h
---- u-boot-2014.04/include/configs/sun4i.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/include/configs/sun4i.h	2014-09-06 16:58:36.461953107 +0200
-@@ -0,0 +1,25 @@
-+/*
-+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * Configuration settings for the Allwinner A10 (sun4i) CPU
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/*
-+ * A10 specific configuration
-+ */
-+#define CONFIG_SUN4I		/* sun4i SoC generation */
-+#define CONFIG_CLK_FULL_SPEED		1008000000
-+
-+#define CONFIG_SYS_PROMPT		"sun4i# "
-+#define CONFIG_MACH_TYPE		4104
-+
-+/*
-+ * Include common sunxi configuration where most the settings are
-+ */
-+#include <configs/sunxi-common.h>
-+
-+#endif /* __CONFIG_H */
-diff -ruN u-boot-2014.04/include/configs/sun5i.h u-boot-sunxi/include/configs/sun5i.h
---- u-boot-2014.04/include/configs/sun5i.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/include/configs/sun5i.h	2014-09-06 16:58:36.461953107 +0200
-@@ -0,0 +1,25 @@
-+/*
-+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * Configuration settings for the Allwinner A13 (sun5i) CPU
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/*
-+ * High Level Configuration Options
-+ */
-+#define CONFIG_SUN5I		/* sun5i SoC generation */
-+#define CONFIG_CLK_FULL_SPEED		1008000000
-+
-+#define CONFIG_SYS_PROMPT		"sun5i# "
-+#define CONFIG_MACH_TYPE		4138
-+
-+/*
-+ * Include common sunxi configuration where most the settings are
-+ */
-+#include <configs/sunxi-common.h>
-+
-+#endif /* __CONFIG_H */
-diff -ruN u-boot-2014.04/include/configs/sun6i.h u-boot-sunxi/include/configs/sun6i.h
---- u-boot-2014.04/include/configs/sun6i.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/include/configs/sun6i.h	2014-09-06 16:58:36.461953107 +0200
-@@ -0,0 +1,43 @@
-+/*
-+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
-+ * (C) Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * Configuration settings for the Allwinner A31 (sun6i) CPU
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/*
-+ * A31 specific configuration
-+ */
-+#define CONFIG_SUN6I		/* sun6i SoC generation */
-+
-+#define CONFIG_SYS_PROMPT		"sun6i# "
-+#define CONFIG_MACH_TYPE		3892
-+
-+/*
-+ * Include common sunxi configuration where most the settings are
-+ */
-+#include <configs/sunxi-common.h>
-+
-+#endif /* __CONFIG_H */
-diff -ruN u-boot-2014.04/include/configs/sun7i.h u-boot-sunxi/include/configs/sun7i.h
---- u-boot-2014.04/include/configs/sun7i.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/include/configs/sun7i.h	2014-09-06 16:58:36.461953107 +0200
-@@ -0,0 +1,30 @@
-+/*
-+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
-+ *
-+ * Configuration settings for the Allwinner A20 (sun7i) CPU
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/*
-+ * A20 specific configuration
-+ */
-+#define CONFIG_SUN7I		/* sun7i SoC generation */
-+#define CONFIG_CLK_FULL_SPEED		912000000
-+
-+#define CONFIG_SYS_PROMPT		"sun7i# "
-+#define CONFIG_MACH_TYPE		4283
-+
-+#if defined(CONFIG_SYS_SECONDARY_ON)
-+#define CONFIG_BOARD_POSTCLK_INIT 1
-+#endif
-+
-+/*
-+ * Include common sunxi configuration where most the settings are
-+ */
-+#include <configs/sunxi-common.h>
-+
-+#endif /* __CONFIG_H */
-diff -ruN u-boot-2014.04/include/configs/sun8i.h u-boot-sunxi/include/configs/sun8i.h
---- u-boot-2014.04/include/configs/sun8i.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/include/configs/sun8i.h	2014-09-06 16:58:36.461953107 +0200
-@@ -0,0 +1,28 @@
-+/*
-+ * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
-+ * (C) Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
-+ * (C) Copyright 2014 Chen-Yu Tsai <wens@csie.org>
-+ *
-+ * Configuration settings for the Allwinner A23 (sun8i) CPU
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/*
-+ * A23 specific configuration
-+ */
-+#define CONFIG_SUN8I		/* sun8i SoC generation */
-+
-+#define CONFIG_SYS_PROMPT		"sun8i# "
-+#define CONFIG_MACH_TYPE		4137
-+
-+/*
-+ * Include common sunxi configuration where most the settings are
-+ */
-+#include <configs/sunxi-common.h>
-+
-+#endif /* __CONFIG_H */
-diff -ruN u-boot-2014.04/include/configs/sunxi-common.h u-boot-sunxi/include/configs/sunxi-common.h
---- u-boot-2014.04/include/configs/sunxi-common.h	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/include/configs/sunxi-common.h	2014-09-06 16:58:36.461953107 +0200
-@@ -0,0 +1,427 @@
-+/*
-+ * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
-+ *
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * Configuration settings for the Allwinner sunxi series of boards.
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef _SUNXI_COMMON_CONFIG_H
-+#define _SUNXI_COMMON_CONFIG_H
-+
-+/*
-+ * High Level Configuration Options
-+ */
-+#define CONFIG_SUNXI		/* sunxi family */
-+#ifdef CONFIG_SPL_BUILD
-+#ifndef CONFIG_SPL_FEL
-+#define CONFIG_SYS_THUMB_BUILD	/* Thumbs mode to save space in SPL */
-+#endif
-+#endif
-+
-+#include <asm/arch/cpu.h>	/* get chip and board defs */
-+
-+#define CONFIG_SYS_TEXT_BASE		0x4a000000
-+
-+/*
-+ * Display CPU and Board information
-+ */
-+#define CONFIG_DISPLAY_CPUINFO
-+#define CONFIG_DISPLAY_BOARDINFO
-+
-+/* Serial & console */
-+#define CONFIG_SYS_NS16550
-+#define CONFIG_SYS_NS16550_SERIAL
-+/* ns16550 reg in the low bits of cpu reg */
-+#define CONFIG_SYS_NS16550_REG_SIZE	-4
-+#define CONFIG_SYS_NS16550_CLK		24000000
-+#define CONFIG_SYS_NS16550_COM1		SUNXI_UART0_BASE
-+#define CONFIG_SYS_NS16550_COM2		SUNXI_UART1_BASE
-+#define CONFIG_SYS_NS16550_COM3		SUNXI_UART2_BASE
-+#define CONFIG_SYS_NS16550_COM4		SUNXI_UART3_BASE
-+#define CONFIG_SYS_NS16550_COM5		SUNXI_R_UART_BASE
-+
-+/* DRAM Base */
-+#define CONFIG_SYS_SDRAM_BASE		0x40000000
-+#define CONFIG_SYS_INIT_RAM_ADDR	0x0
-+#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* 32 KiB */
-+
-+#define CONFIG_SYS_INIT_SP_OFFSET \
-+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-+#define CONFIG_SYS_INIT_SP_ADDR \
-+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-+
-+/* A10 has 1 banks of DRAM, we use only bank 1 in U-Boot */
-+#define CONFIG_NR_DRAM_BANKS		1
-+#define PHYS_SDRAM_0			CONFIG_SYS_SDRAM_BASE
-+#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN7I)
-+#define PHYS_SDRAM_0_SIZE		0x80000000 /* 2 GiB */
-+#else
-+#define PHYS_SDRAM_0_SIZE		0x40000000 /* 1 GiB */
-+#endif
-+#if 0
-+/* Nand config */
-+#define CONFIG_NAND
-+#define CONFIG_NAND_SUNXI
-+#define CONFIG_CMD_NAND                         /* NAND support */
-+#define CONFIG_SYS_MAX_NAND_DEVICE      1
-+#define CONFIG_SYS_NAND_BASE            0x00
-+#endif
-+
-+#define CONFIG_CMD_MEMORY
-+#define CONFIG_CMD_SETEXPR
-+
-+#define CONFIG_SETUP_MEMORY_TAGS
-+#define CONFIG_CMDLINE_TAG
-+#define CONFIG_INITRD_TAG
-+
-+/* mmc config */
-+/* Can't use MMC slot 0 if the UART is directed there */
-+#if !defined CONFIG_UART0_PORT_F || CONFIG_MMC_SUNXI_SLOT != 0
-+#define CONFIG_MMC
-+#define CONFIG_GENERIC_MMC
-+#define CONFIG_CMD_MMC
-+#define CONFIG_MMC_SUNXI
-+#ifndef CONFIG_MMC_SUNXI_SLOT
-+#define CONFIG_MMC_SUNXI_SLOT		0
-+#endif
-+#define CONFIG_ENV_IS_IN_MMC
-+#define CONFIG_SYS_MMC_ENV_DEV		0	/* first detected MMC controller */
-+#endif
-+
-+/* 4MB of malloc() pool */
-+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (4 << 20))
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define CONFIG_CMD_ECHO
-+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
-+#define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
-+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-+#define CONFIG_SYS_GENERIC_BOARD
-+
-+/* Boot Argument Buffer Size */
-+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-+
-+#define CONFIG_SYS_LOAD_ADDR		0x48000000 /* default load address */
-+
-+/* standalone support */
-+#define CONFIG_STANDALONE_LOAD_ADDR	0x48000000
-+
-+#define CONFIG_SYS_HZ			1000
-+
-+/* baudrate */
-+#define CONFIG_BAUDRATE			115200
-+
-+/* The stack sizes are set up in start.S using the settings below */
-+#define CONFIG_STACKSIZE		(256 << 10)	/* 256 KiB */
-+
-+/* FLASH and environment organization */
-+
-+#define CONFIG_SYS_NO_FLASH
-+
-+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* 512 KiB */
-+#define CONFIG_IDENT_STRING		" Allwinner Technology"
-+
-+#define CONFIG_ENV_OFFSET		(544 << 10) /* (8 + 24 + 512) KiB */
-+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-+
-+#ifdef CONFIG_SPL_FEL
-+#define RUN_BOOT_RAM	"run boot_ram;"
-+#else
-+#define RUN_BOOT_RAM	""
-+#endif
-+
-+#define CONFIG_BOOTCOMMAND \
-+	RUN_BOOT_RAM \
-+	"if run loadbootenv; then " \
-+	  "echo Loaded environment from ${bootenv};" \
-+	  "env import -t ${scriptaddr} ${filesize};" \
-+	"fi;" \
-+	"if test -n \\\"${uenvcmd}\\\"; then " \
-+	  "echo Running uenvcmd ...;" \
-+	  "run uenvcmd;" \
-+	"fi;" \
-+	"if run loadbootscr; then "\
-+	  "echo Jumping to ${bootscr};" \
-+	  "source ${scriptaddr};" \
-+	"fi;" \
-+	"run autoboot;" \
-+	""
-+
-+#ifdef CONFIG_CMD_WATCHDOG
-+#define	RESET_WATCHDOG "watchdog 0"
-+#else
-+#define RESET_WATCHDOG "true"
-+#endif
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+	"bootm_size=0x10000000\0" \
-+	"console=ttyS0,115200\0" \
-+	"panicarg=panic=10\0" \
-+	"extraargs=\0" \
-+	"loglevel=8\0" \
-+	"scriptaddr=0x44000000\0" \
-+	"device=mmc\0" \
-+	"partition=0:1\0" \
-+	"setargs=" \
-+	  "if test -z \\\\\"$root\\\\\"; then"\
-+	    " if test \\\\\"$bootpath\\\\\" = \"/boot/\"; then"\
-+	      " root=\"/dev/mmcblk0p1 rootwait\";"\
-+	    " else" \
-+	      " root=\"/dev/mmcblk0p2 rootwait\";"\
-+	    " fi;"\
-+	  " fi;"\
-+	  " setenv bootargs console=${console} root=${root}" \
-+	  " loglevel=${loglevel} ${panicarg} ${extraargs}" \
-+	  "\0" \
-+	"kernel=uImage\0" \
-+	"bootenv=uEnv.txt\0" \
-+	"bootscr=boot.scr\0" \
-+	"script=script.bin\0" \
-+	"loadbootscr=" \
-+	  "fatload $device $partition $scriptaddr ${bootscr}" \
-+	  " || " \
-+	  "ext2load $device $partition $scriptaddr boot/${bootscr}" \
-+	  " ||" \
-+	  "ext2load $device $partition $scriptaddr ${bootscr}" \
-+	  "\0" \
-+	"loadbootenv=" \
-+	  "fatload $device $partition $scriptaddr ${bootenv}" \
-+	  " || " \
-+	  "ext2load $device $partition $scriptaddr boot/${bootenv}" \
-+	  " || " \
-+	  "ext2load $device $partition $scriptaddr ${bootenv}" \
-+	  "\0" \
-+	"loadkernel=" \
-+	  "if "\
-+	    "bootpath=/boot/" \
-+	    " && " \
-+	    "ext2load $device $partition 0x43000000 ${bootpath}${script}" \
-+	    " && " \
-+	    "ext2load $device $partition 0x48000000 ${bootpath}${kernel}" \
-+	  ";then true; elif " \
-+	    "bootpath=/" \
-+	    " && " \
-+	    "fatload $device $partition 0x43000000 ${script}" \
-+	    " && " \
-+	    "fatload $device $partition 0x48000000 ${kernel}" \
-+	  ";then true; elif " \
-+	    "bootpath=/" \
-+	    " && " \
-+	    "ext2load $device $partition 0x43000000 ${bootpath}${script}" \
-+	    " && " \
-+	    "ext2load $device $partition 0x48000000 ${bootpath}${kernel}" \
-+	  ";then true; else "\
-+	    "false" \
-+	  ";fi" \
-+	  "\0" \
-+	"autoboot=" \
-+	  "run loadkernel" \
-+	  " && " \
-+	  "run setargs" \
-+	  " && " \
-+	  RESET_WATCHDOG \
-+	  " && " \
-+	  "bootm 0x48000000" \
-+	  "\0" \
-+	"boot_ram=" \
-+	  "saved_stdout=$stdout;setenv stdout nc;"\
-+	  "if iminfo 0x41000000; then" \
-+	    " " RESET_WATCHDOG ";"\
-+	    " setenv stdout $saved_stdout;" \
-+	    " source 0x41000000;" \
-+	  "else" \
-+	    " setenv stdout $saved_stdout;" \
-+	  "fi" \
-+	  "\0" \
-+	""
-+
-+#define CONFIG_SYS_BOOT_GET_CMDLINE
-+
-+#include <config_cmd_default.h>
-+
-+#define CONFIG_FAT_WRITE	/* enable write access */
-+
-+#define CONFIG_SPL_FRAMEWORK
-+#define CONFIG_SPL_LIBCOMMON_SUPPORT
-+#define CONFIG_SPL_SERIAL_SUPPORT
-+#define CONFIG_SPL_LIBGENERIC_SUPPORT
-+#define CONFIG_SPL_DISPLAY_PRINT
-+
-+/* Falcon boot mode support */
-+/* Disabled by default on sun4i/sun7i. Many GCC versions produces a too
-+ * large SPL for A10/A20 with this on. sun5i however accepts a much larger
-+ * SPL
-+ */
-+#if defined( CONFIG_SUN5I ) || defined ( CONFIG_SYS_THUMB_BUILD )
-+#define CONFIG_SPL_OS_BOOT
-+#endif
-+
-+#ifdef CONFIG_SPL_FEL
-+
-+#define CONFIG_SPL
-+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds"
-+#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi"
-+#define CONFIG_SPL_TEXT_BASE		0x2000
-+#define CONFIG_SPL_MAX_SIZE		0x4000		/* 16 KiB */
-+
-+#else /* CONFIG_SPL */
-+
-+#define CONFIG_SPL_BSS_START_ADDR	0x4ff80000
-+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KiB */
-+
-+#define CONFIG_SPL_TEXT_BASE		0x20		/* sram start+header */
-+#ifdef CONFIG_SUN5I
-+#define CONFIG_SPL_MAX_SIZE		0x75e0		/* 7748+ is used */
-+#else
-+#define CONFIG_SPL_MAX_SIZE		0x5fe0		/* 24KB on sun4i/sun7i */
-+#endif
-+
-+#define CONFIG_SPL_LIBDISK_SUPPORT
-+#define CONFIG_SPL_MMC_SUPPORT
-+
-+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
-+
-+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	80	/* 40KiB */
-+#define CONFIG_SPL_PAD_TO		32768		/* decimal for 'dd' */
-+
-+#endif /* CONFIG_SPL */
-+/* end of 32 KiB in sram */
-+#define LOW_LEVEL_SRAM_STACK		0x00008000 /* End of sram */
-+#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
-+#define CONFIG_SYS_SPL_MALLOC_START	0x4ff00000
-+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000	/* 512 KiB */
-+
-+#ifdef CONFIG_SPL_OS_BOOT
-+#define CONFIG_CMD_SPL
-+#define CONFIG_SYS_SPL_ARGS_ADDR		(PHYS_SDRAM_0 + 0x100)
-+#ifdef CONFIG_SPL_MMC_SUPPORT
-+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	1344
-+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  256
-+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 1600
-+#endif
-+#endif
-+
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_NET
-+#undef CONFIG_CMD_NFS
-+
-+/* I2C */
-+#if !defined CONFIG_SUN6I && !defined CONFIG_SUN8I
-+#define CONFIG_SPL_I2C_SUPPORT
-+#endif
-+/* No CONFIG_SYS_I2C as we use the non converted mvtwsi driver */
-+#define CONFIG_HARD_I2C
-+#define CONFIG_SYS_I2C_SUNXI
-+#define CONFIG_SYS_I2C_SPEED		400000
-+#define CONFIG_SYS_I2C_SLAVE		0x7f
-+#define CONFIG_CMD_I2C
-+
-+/* Watchdog */
-+#if 0
-+#define CONFIG_WATCHDOG			/* automatic watchdog support */
-+#define CONFIG_CMD_WATCHDOG		/* watchdog command setting the watchdog timeout */
-+#endif
-+
-+/* GPIO */
-+#define CONFIG_SUNXI_GPIO
-+#define CONFIG_CMD_GPIO
-+
-+/* PMU */
-+#if !defined CONFIG_AXP152_POWER && !defined CONFIG_AXP221_POWER && !defined CONFIG_NO_AXP
-+#define CONFIG_AXP209_POWER
-+#endif
-+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER
-+#define CONFIG_SPL_POWER_SUPPORT
-+#endif
-+
-+#ifdef CONFIG_STATUSLED
-+#define STATUS_LED_BIT CONFIG_STATUSLED
-+#endif
-+#ifdef CONFIG_STATUSLED1
-+#define STATUS_LED_BIT1 CONFIG_STATUSLED1
-+#endif
-+#ifdef CONFIG_STATUSLED2
-+#define STATUS_LED_BIT2 CONFIG_STATUSLED2
-+#endif
-+#ifdef CONFIG_STATUSLED3
-+#define STATUS_LED_BIT3 CONFIG_STATUSLED3
-+#endif
-+
-+#ifndef CONFIG_SPL_BUILD
-+#ifdef STATUS_LED_BIT
-+#define CONFIG_GPIO_LED
-+#define CONFIG_STATUS_LED
-+#ifndef STATUS_LED_BOOT
-+#define STATUS_LED_BOOT 0
-+#endif
-+#ifndef STATUS_LED_STATE
-+#define STATUS_LED_STATE STATUS_LED_ON
-+#define STATUS_LED_PERIOD 1
-+#endif
-+#ifndef STATUS_LED_STATE1
-+#define STATUS_LED_STATE1 STATUS_LED_OFF
-+#define STATUS_LED_PERIOD1 1
-+#endif
-+#ifndef STATUS_LED_STATE2
-+#define STATUS_LED_STATE2 STATUS_LED_OFF
-+#define STATUS_LED_PERIOD2 1
-+#endif
-+#ifndef STATUS_LED_STATE3
-+#define STATUS_LED_STATE3 STATUS_LED_OFF
-+#define STATUS_LED_PERIOD3 1
-+#endif
-+#define CONFIG_BOARD_SPECIFIC_LED
-+#define CONFIG_CMD_LED
-+#endif
-+#endif
-+
-+/* Define this to have serial channel 1 (UART0) redirected to SD port */
-+/* #define CONFIG_UART0_PORT_F */
-+
-+#ifndef CONFIG_CONS_INDEX
-+#define CONFIG_CONS_INDEX              1       /* UART0 */
-+#endif
-+
-+/* Ethernet support */
-+#ifdef CONFIG_SUNXI_EMAC
-+#define CONFIG_MII			/* MII PHY management		*/
-+#endif
-+
-+#ifdef CONFIG_SUNXI_GMAC
-+#define CONFIG_DESIGNWARE_ETH		/* GMAC can use designware driver */
-+#define CONFIG_DW_AUTONEG
-+#define CONFIG_PHY_GIGE			/* GMAC can use gigabit PHY	*/
-+#define CONFIG_PHY_ADDR		1
-+#define CONFIG_MII			/* MII PHY management		*/
-+#define CONFIG_PHYLIB
-+#endif
-+
-+#ifdef CONFIG_CMD_NET
-+#define CONFIG_CMD_NFS
-+#define CONFIG_CMD_DNS
-+#define CONFIG_NETCONSOLE
-+#define CONFIG_BOOTP_DNS2
-+#define CONFIG_BOOTP_SEND_HOSTNAME
-+#endif
-+
-+#if !defined CONFIG_ENV_IS_IN_MMC && \
-+    !defined CONFIG_ENV_IS_IN_NAND && \
-+    !defined CONFIG_ENV_IS_IN_FAT && \
-+    !defined CONFIG_ENV_IS_IN_SPI_FLASH
-+#define CONFIG_ENV_IS_NOWHERE
-+#endif
-+
-+#define CONFIG_MISC_INIT_R
-+
-+#ifndef CONFIG_SPL_BUILD
-+#include <config_distro_defaults.h>
-+#endif
-+
-+#endif /* _SUNXI_COMMON_CONFIG_H */
-diff -ruN u-boot-2014.04/include/netdev.h u-boot-sunxi/include/netdev.h
---- u-boot-2014.04/include/netdev.h	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/include/netdev.h	2014-09-06 16:58:36.485953106 +0200
-@@ -79,7 +79,8 @@
- int skge_initialize(bd_t *bis);
- int smc91111_initialize(u8 dev_num, int base_addr);
- int smc911x_initialize(u8 dev_num, int base_addr);
--int sunxi_wemac_initialize(bd_t *bis);
-+int sunxi_emac_initialize(bd_t *bis);
-+int sunxi_gmac_initialize(bd_t *bis);
- int tsi108_eth_initialize(bd_t *bis);
- int uec_standard_init(bd_t *bis);
- int uli526x_initialize(bd_t *bis);
-diff -ruN u-boot-2014.04/Makefile u-boot-sunxi/Makefile
---- u-boot-2014.04/Makefile	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/Makefile	2014-09-06 16:58:35.065953148 +0200
-@@ -870,6 +870,13 @@
- u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
- 	$(call if_changed,pad_cat)
- 
-+ifneq ($(CONFIG_SUNXI),)
-+OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
-+				   --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
-+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
-+	$(call if_changed,pad_cat)
-+endif
-+
- ifneq ($(CONFIG_TEGRA),)
- OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
- u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
-@@ -1081,6 +1088,9 @@
- spl/u-boot-spl: tools prepare
- 	$(Q)$(MAKE) obj=spl -f $(srctree)/spl/Makefile all
- 
-+spl/sunxi-spl.bin: spl/u-boot-spl
-+	@:
-+
- tpl/u-boot-tpl.bin: tools prepare
- 	$(Q)$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y
- 
-diff -ruN u-boot-2014.04/mkconfig u-boot-sunxi/mkconfig
---- u-boot-2014.04/mkconfig	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/mkconfig	2014-09-06 16:58:36.509953105 +0200
-@@ -174,6 +174,7 @@
- echo "#define CONFIG_SYS_ARCH  \"${arch}\""  >> config.h
- echo "#define CONFIG_SYS_CPU   \"${cpu}\""   >> config.h
- echo "#define CONFIG_SYS_BOARD \"${board}\"" >> config.h
-+echo "#define CONFIG_SYS_TARGET \"${BOARD_NAME}\"" >> config.h
- 
- [ "${vendor}" ] && echo "#define CONFIG_SYS_VENDOR \"${vendor}\"" >> config.h
- 
-diff -ruN u-boot-2014.04/snapshot.commit u-boot-sunxi/snapshot.commit
---- u-boot-2014.04/snapshot.commit	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/snapshot.commit	2014-09-06 16:58:36.521953105 +0200
-@@ -1 +1 @@
--dda0dbfc69f3d560c87f5be85f127ed862ea6721  Mon, 14 Apr 2014 15:19:24 -0400
-+$Format:%H  %cD$
-diff -ruN u-boot-2014.04/spl/Makefile u-boot-sunxi/spl/Makefile
---- u-boot-2014.04/spl/Makefile	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/spl/Makefile	2014-09-06 16:58:36.521953105 +0200
-@@ -188,6 +188,12 @@
- ALL-y	+= $(obj)/$(BOARD)-spl.bin
- endif
- 
-+ifdef CONFIG_SUNXI
-+ifndef CONFIG_SPL_FEL
-+ALL-y	+= $(obj)/sunxi-spl.bin
-+endif
-+endif
-+
- all:	$(ALL-y)
- 
- ifdef CONFIG_SAMSUNG
-@@ -215,6 +221,13 @@
- LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
- endif
- 
-+ifdef CONFIG_SUNXI
-+quiet_cmd_mksunxiboot = MKSUNXI $@
-+cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
-+$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin
-+	$(call if_changed,mksunxiboot)
-+endif
-+
- quiet_cmd_u-boot-spl = LD      $@
-       cmd_u-boot-spl = cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
- 		       $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
-diff -ruN u-boot-2014.04/tools/.gitignore u-boot-sunxi/tools/.gitignore
---- u-boot-2014.04/tools/.gitignore	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/tools/.gitignore	2014-09-06 16:58:36.521953105 +0200
-@@ -9,6 +9,7 @@
- /mkexynosspl
- /mpc86x_clk
- /mxsboot
-+/mksunxiboot
- /ncb
- /proftool
- /relocate-rela
-diff -ruN u-boot-2014.04/tools/Makefile u-boot-sunxi/tools/Makefile
---- u-boot-2014.04/tools/Makefile	2014-04-14 21:19:24.000000000 +0200
-+++ u-boot-sunxi/tools/Makefile	2014-09-06 16:58:36.521953105 +0200
-@@ -120,6 +120,8 @@
- hostprogs-$(CONFIG_MX28) += mxsboot$(SFX)
- HOSTCFLAGS_mxsboot$(SFX).o := -pedantic
- 
-+hostprogs-$(CONFIG_SUNXI) += mksunxiboot$(SFX)
-+
- hostprogs-$(CONFIG_NETCONSOLE) += ncb$(SFX)
- hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX)
- 
-diff -ruN u-boot-2014.04/tools/mksunxiboot.c u-boot-sunxi/tools/mksunxiboot.c
---- u-boot-2014.04/tools/mksunxiboot.c	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/tools/mksunxiboot.c	2014-09-06 16:58:36.529953105 +0200
-@@ -0,0 +1,140 @@
-+/*
-+ * (C) Copyright 2007-2011
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ * Tom Cubie <tangliang@allwinnertech.com>
-+ *
-+ * a simple tool to generate bootable image for sunxi platform.
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+#include <fcntl.h>
-+#include <stdio.h>
-+#include <unistd.h>
-+#include <stdlib.h>
-+#include <string.h>
-+#include <errno.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+
-+/* boot head definition from sun4i boot code */
-+struct boot_file_head {
-+	uint32_t b_instruction;	/* one intruction jumping to real code */
-+	uint8_t magic[8];	/* ="eGON.BT0" or "eGON.BT1", not C-style str */
-+	uint32_t check_sum;	/* generated by PC */
-+	uint32_t length;	/* generated by PC */
-+	/*
-+	 * We use a simplified header, only filling in what is needed
-+	 * by the boot ROM. To be compatible with Allwinner tools we
-+	 * would need to implement the proper fields here instead of
-+	 * padding.
-+	 */
-+	uint8_t pad[12];		/* align to 32 bytes */
-+};
-+
-+#define BOOT0_MAGIC                     "eGON.BT0"
-+#define STAMP_VALUE                     0x5F0A6C39
-+
-+/* check sum functon from sun4i boot code */
-+int gen_check_sum(struct boot_file_head *head_p)
-+{
-+	uint32_t length;
-+	uint32_t *buf;
-+	uint32_t loop;
-+	uint32_t i;
-+	uint32_t sum;
-+
-+	length = head_p->length;
-+	if ((length & 0x3) != 0)	/* must 4-byte-aligned */
-+		return -1;
-+	buf = (uint32_t *)head_p;
-+	head_p->check_sum = STAMP_VALUE;	/* fill stamp */
-+	loop = length >> 2;
-+
-+	/* calculate the sum */
-+	for (i = 0, sum = 0; i < loop; i++)
-+		sum += buf[i];
-+
-+	/* write back check sum */
-+	head_p->check_sum = sum;
-+
-+	return 0;
-+}
-+
-+#define ALIGN(x, a) __ALIGN_MASK((x), (typeof(x))(a)-1)
-+#define __ALIGN_MASK(x, mask) (((x)+(mask))&~(mask))
-+
-+#define SUN4I_SRAM_SIZE 0x7600	/* 0x7748+ is used by BROM */
-+#define SRAM_LOAD_MAX_SIZE (SUN4I_SRAM_SIZE - sizeof(struct boot_file_head))
-+#define BLOCK_SIZE 512
-+
-+struct boot_img {
-+	struct boot_file_head header;
-+	char code[SRAM_LOAD_MAX_SIZE];
-+	char pad[BLOCK_SIZE];
-+};
-+
-+int main(int argc, char *argv[])
-+{
-+	int fd_in, fd_out;
-+	struct boot_img img;
-+	unsigned file_size;
-+	int count;
-+
-+	if (argc < 2) {
-+		printf("\tThis program makes an input bin file to sun4i " \
-+		       "bootable image.\n" \
-+		       "\tUsage: %s input_file out_putfile\n", argv[0]);
-+		return EXIT_FAILURE;
-+	}
-+
-+	fd_in = open(argv[1], O_RDONLY);
-+	if (fd_in < 0) {
-+		perror("Open input file");
-+		return EXIT_FAILURE;
-+	}
-+
-+	memset(img.pad, 0, BLOCK_SIZE);
-+
-+	/* get input file size */
-+	file_size = lseek(fd_in, 0, SEEK_END);
-+
-+	if (file_size > SRAM_LOAD_MAX_SIZE) {
-+		fprintf(stderr, "ERROR: File too large!\n");
-+		return EXIT_FAILURE;
-+	}
-+
-+	fd_out = open(argv[2], O_WRONLY | O_CREAT, 0666);
-+	if (fd_out < 0) {
-+		perror("Open output file");
-+		return EXIT_FAILURE;
-+	}
-+
-+	/* read file to buffer to calculate checksum */
-+	lseek(fd_in, 0, SEEK_SET);
-+	count = read(fd_in, img.code, file_size);
-+	if (count != file_size) {
-+		perror("Reading input image");
-+		return EXIT_FAILURE;
-+	}
-+
-+	/* fill the header */
-+	img.header.b_instruction =	/* b instruction */
-+		0xEA000000 |	/* jump to the first instr after the header */
-+		((sizeof(struct boot_file_head) / sizeof(int) - 2)
-+		 & 0x00FFFFFF);
-+	memcpy(img.header.magic, BOOT0_MAGIC, 8);	/* no '0' termination */
-+	img.header.length =
-+		ALIGN(file_size + sizeof(struct boot_file_head), BLOCK_SIZE);
-+	gen_check_sum(&img.header);
-+
-+	count = write(fd_out, &img, img.header.length);
-+	if (count != img.header.length) {
-+		perror("Writing output");
-+		return EXIT_FAILURE;
-+	}
-+
-+	close(fd_in);
-+	close(fd_out);
-+
-+	return EXIT_SUCCESS;
-+}
-diff -ruN u-boot-2014.04/tools/mksunxiboot.README u-boot-sunxi/tools/mksunxiboot.README
---- u-boot-2014.04/tools/mksunxiboot.README	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-sunxi/tools/mksunxiboot.README	2014-09-06 16:58:36.529953105 +0200
-@@ -0,0 +1,13 @@
-+This program make a arm binary file can be loaded by Allwinner A10 and related
-+chips from storage media such as nand and mmc.
-+
-+More information about A10 boot, please refer to
-+http://rhombus-tech.net/allwinner_a10/a10_boot_process/
-+
-+To compile this program, just type make, you will get 'mksunxiboot'.
-+
-+To use it,
-+$./mksunxiboot u-boot.bin u-boot-mmc.bin
-+then you can write it to a mmc card with dd.
-+$sudo dd if=u-boot-mmc.bin of=/dev/sdb bs=1024 seek=8
-+then insert your mmc card to your A10 tablet, you can boot from mmc card.
diff --git a/package/boot/uboot-sunxi/patches/002-add-linksprite-pcduino.diff b/package/boot/uboot-sunxi/patches/002-add-linksprite-pcduino.diff
new file mode 100644
index 0000000..904c815
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/002-add-linksprite-pcduino.diff
@@ -0,0 +1,71 @@
+diff -ruN u-boot-2015.01-rc3.old/board/sunxi/dram_sun4i_408_1024_iow8.c u-boot-2015.01-rc3/board/sunxi/dram_sun4i_408_1024_iow8.c
+--- u-boot-2015.01-rc3.old/board/sunxi/dram_sun4i_408_1024_iow8.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2015.01-rc3/board/sunxi/dram_sun4i_408_1024_iow8.c	2015-01-06 00:05:07.843497430 +0100
+@@ -0,0 +1,31 @@
++/* this file is generated, don't edit it yourself */
++
++#include <common.h>
++#include <asm/arch/dram.h>
++
++static struct dram_para dram_para = {
++	.clock = 408,
++	.type = 3,
++	.rank_num = 1,
++	.density = 2048,
++	.io_width = 8,
++	.bus_width = 32,
++	.cas = 6,
++	.zq = 123,
++	.odt_en = 0,
++	.size = 1024,
++	.tpr0 = 0x30926692,
++	.tpr1 = 0x1090,
++	.tpr2 = 0x1a0c8,
++	.tpr3 = 0,
++	.tpr4 = 0,
++	.tpr5 = 0,
++	.emr1 = 0,
++	.emr2 = 0,
++	.emr3 = 0,
++};
++
++unsigned long sunxi_dram_init(void)
++{
++	return dramc_init(&dram_para);
++}
+diff -ruN u-boot-2015.01-rc3.old/board/sunxi/Kconfig u-boot-2015.01-rc3/board/sunxi/Kconfig
+--- u-boot-2015.01-rc3.old/board/sunxi/Kconfig	2014-12-08 22:35:08.000000000 +0100
++++ u-boot-2015.01-rc3/board/sunxi/Kconfig	2015-01-06 00:06:04.218573211 +0100
+@@ -99,6 +99,10 @@
+ 	bool "IPPO_Q8H_V5"
+ 	depends on MACH_SUN8I
+ 
++config TARGET_PCDUINO
++	bool "PCDUINO"
++	depends on MACH_SUN4I
++
+ config TARGET_PCDUINO3
+ 	bool "PCDUINO3"
+ 	depends on MACH_SUN7I
+diff -ruN u-boot-2015.01-rc3.old/board/sunxi/Makefile u-boot-2015.01-rc3/board/sunxi/Makefile
+--- u-boot-2015.01-rc3.old/board/sunxi/Makefile	2014-12-08 22:35:08.000000000 +0100
++++ u-boot-2015.01-rc3/board/sunxi/Makefile	2015-01-06 00:05:43.718909285 +0100
+@@ -31,6 +31,7 @@
+ obj-$(CONFIG_TARGET_MELE_M3)		+= dram_sun7i_384_1024_iow16.o
+ obj-$(CONFIG_TARGET_MINI_X)		+= dram_sun4i_360_512.o
+ obj-$(CONFIG_TARGET_MINI_X_1GB)		+= dram_sun4i_360_1024_iow16.o
++obj-$(CONFIG_TARGET_PCDUINO)		+= dram_sun4i_408_1024_iow8.o
+ obj-$(CONFIG_TARGET_PCDUINO3)		+= dram_linksprite_pcduino3.o
+ obj-$(CONFIG_TARGET_QT840A)		+= dram_sun7i_384_512_busw16_iow16.o
+ obj-$(CONFIG_TARGET_R7DONGLE)		+= dram_r7dongle.o
+diff -ruN u-boot-2015.01-rc3.old/configs/Linksprite_pcDuino_defconfig u-boot-2015.01-rc3/configs/Linksprite_pcDuino_defconfig
+--- u-boot-2015.01-rc3.old/configs/Linksprite_pcDuino_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2015.01-rc3/configs/Linksprite_pcDuino_defconfig	2015-01-06 00:04:37.323997769 +0100
+@@ -0,0 +1,7 @@
++CONFIG_SPL=y
++CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
++CONFIG_FDTFILE="sun4i-a10-pcduino.dtb"
+++S:CONFIG_ARM=y
+++S:CONFIG_ARCH_SUNXI=y
+++S:CONFIG_MACH_SUN4I=y
+++S:CONFIG_TARGET_PCDUINO=y
diff --git a/package/boot/uboot-sunxi/patches/002-uboot-jwrdegoede-psci-support.patch b/package/boot/uboot-sunxi/patches/002-uboot-jwrdegoede-psci-support.patch
deleted file mode 100644
index 65407aa..0000000
--- a/package/boot/uboot-sunxi/patches/002-uboot-jwrdegoede-psci-support.patch
+++ /dev/null
@@ -1,1495 +0,0 @@
-From 86f31982ac62e80fe586cad2e0a49a7b22e3d4ee Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Sat, 7 Dec 2013 11:19:07 +0000
-Subject: [PATCH] ARM: HYP/non-sec: move switch to non-sec to the last boot
- phase
-
-Having the switch to non-secure in the "prep" phase is causing
-all kind of troubles, as that stage can be called multiple times.
-
-Instead, move the switch to non-secure to the last possible phase,
-when there is no turning back anymore.
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- arch/arm/lib/bootm.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
-index 47ee070..10634a4 100644
---- a/arch/arm/lib/bootm.c
-+++ b/arch/arm/lib/bootm.c
-@@ -242,7 +242,6 @@ static void boot_prep_linux(bootm_headers_t *images)
- 		printf("FDT and ATAGS support not compiled in - hanging\n");
- 		hang();
- 	}
--	do_nonsec_virt_switch();
- }
- 
- /* Subcommand: GO */
-@@ -287,8 +286,10 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)
- 	else
- 		r2 = gd->bd->bi_boot_params;
- 
--	if (!fake)
-+	if (!fake) {
-+		do_nonsec_virt_switch();
- 		kernel_entry(0, machid, r2);
-+	}
- #endif
- }
- 
-From c26d288f6cbc6d53219001d42476f314c403257b Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Sat, 7 Dec 2013 11:19:08 +0000
-Subject: [PATCH] ARM: HYP/non-sec: add a barrier after setting SCR.NS==1
-
-A CP15 instruction execution can be reordered, requiring an
-isb to be sure it is executed in program order.
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- arch/arm/cpu/armv7/nonsec_virt.S | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
-index 6367e09..12de5c2 100644
---- a/arch/arm/cpu/armv7/nonsec_virt.S
-+++ b/arch/arm/cpu/armv7/nonsec_virt.S
-@@ -46,6 +46,7 @@ _secure_monitor:
- #endif
- 
- 	mcr	p15, 0, r1, c1, c1, 0		@ write SCR (with NS bit set)
-+	isb
- 
- #ifdef CONFIG_ARMV7_VIRT
- 	mrceq	p15, 0, r0, c12, c0, 1		@ get MVBAR value
-From 06feeea3c84cc58ff3d5c19f6a430886495f86ce Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Sat, 7 Dec 2013 11:19:09 +0000
-Subject: [PATCH] ARM: non-sec: reset CNTVOFF to zero
-
-Before switching to non-secure, make sure that CNTVOFF is set
-to zero on all CPUs. Otherwise, kernel running in non-secure
-without HYP enabled (hence using virtual timers) may observe
-timers that are not synchronized, effectively seeing time
-going backward...
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- arch/arm/cpu/armv7/nonsec_virt.S | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
-index 12de5c2..b5c946f 100644
---- a/arch/arm/cpu/armv7/nonsec_virt.S
-+++ b/arch/arm/cpu/armv7/nonsec_virt.S
-@@ -38,10 +38,10 @@ _secure_monitor:
- 	bic	r1, r1, #0x4e			@ clear IRQ, FIQ, EA, nET bits
- 	orr	r1, r1, #0x31			@ enable NS, AW, FW bits
- 
--#ifdef CONFIG_ARMV7_VIRT
- 	mrc	p15, 0, r0, c0, c1, 1		@ read ID_PFR1
- 	and	r0, r0, #CPUID_ARM_VIRT_MASK	@ mask virtualization bits
- 	cmp	r0, #(1 << CPUID_ARM_VIRT_SHIFT)
-+#ifdef CONFIG_ARMV7_VIRT
- 	orreq	r1, r1, #0x100			@ allow HVC instruction
- #endif
- 
-@@ -52,7 +52,14 @@ _secure_monitor:
- 	mrceq	p15, 0, r0, c12, c0, 1		@ get MVBAR value
- 	mcreq	p15, 4, r0, c12, c0, 0		@ write HVBAR
- #endif
-+	bne	1f
- 
-+	@ Reset CNTVOFF to 0 before leaving monitor mode
-+	mrc	p15, 0, r0, c0, c1, 1		@ read ID_PFR1
-+	ands	r0, r0, #CPUID_ARM_GENTIMER_MASK	@ test arch timer bits
-+	movne	r0, #0
-+	mcrrne	p15, 4, r0, r0, c14		@ Reset CNTVOFF to zero
-+1:
- 	movs	pc, lr				@ return to non-secure SVC
- 
- _hyp_trap:
-From 054bcf5147ff5a20298bce5b3bdfbf3e1c797594 Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Sat, 7 Dec 2013 11:19:10 +0000
-Subject: [PATCH] ARM: add missing HYP mode constant
-
-In order to be able to use the various mode constants (far more
-readable than random hex values), add the missing HYP and A
-values.
-
-Also update arm/lib/interrupts.c to display HYP instead of an
-unknown value.
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- arch/arm/include/asm/proc-armv/ptrace.h | 2 ++
- arch/arm/lib/interrupts.c               | 2 +-
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/include/asm/proc-armv/ptrace.h b/arch/arm/include/asm/proc-armv/ptrace.h
-index 21aef58..71df5a9 100644
---- a/arch/arm/include/asm/proc-armv/ptrace.h
-+++ b/arch/arm/include/asm/proc-armv/ptrace.h
-@@ -38,12 +38,14 @@ struct pt_regs {
- #define IRQ_MODE	0x12
- #define SVC_MODE	0x13
- #define ABT_MODE	0x17
-+#define HYP_MODE	0x1a
- #define UND_MODE	0x1b
- #define SYSTEM_MODE	0x1f
- #define MODE_MASK	0x1f
- #define T_BIT		0x20
- #define F_BIT		0x40
- #define I_BIT		0x80
-+#define A_BIT		0x100
- #define CC_V_BIT	(1 << 28)
- #define CC_C_BIT	(1 << 29)
- #define CC_Z_BIT	(1 << 30)
-diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c
-index 758b013..f6b7c03 100644
---- a/arch/arm/lib/interrupts.c
-+++ b/arch/arm/lib/interrupts.c
-@@ -103,7 +103,7 @@ void show_regs (struct pt_regs *regs)
- 	"UK12_26",	"UK13_26",	"UK14_26",	"UK15_26",
- 	"USER_32",	"FIQ_32",	"IRQ_32",	"SVC_32",
- 	"UK4_32",	"UK5_32",	"UK6_32",	"ABT_32",
--	"UK8_32",	"UK9_32",	"UK10_32",	"UND_32",
-+	"UK8_32",	"UK9_32",	"HYP_32",	"UND_32",
- 	"UK12_32",	"UK13_32",	"UK14_32",	"SYS_32",
- 	};
- 
-From 213a8d9b7e613210d3c7d8b99c95b454ad0527d8 Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Sat, 7 Dec 2013 11:19:11 +0000
-Subject: [PATCH] ARM: HYP/non-sec: add separate section for secure code
-
-In anticipation of refactoring the HYP/non-secure code to run
-from secure RAM, add a new linker section that will contain that
-code.
-
-Nothing is using it just yet.
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- arch/arm/config.mk      |  2 +-
- arch/arm/cpu/u-boot.lds | 30 ++++++++++++++++++++++++++++++
- arch/arm/lib/sections.c |  2 ++
- 3 files changed, 33 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/config.mk b/arch/arm/config.mk
-index 66ecc2e..2bdfca5 100644
---- a/arch/arm/config.mk
-+++ b/arch/arm/config.mk
-@@ -113,7 +113,7 @@ endif
- ifdef CONFIG_ARM64
- OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn
- else
--OBJCOPYFLAGS += -j .text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn
-+OBJCOPYFLAGS += -j .text -j .secure_text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn
- endif
- 
- ifneq ($(CONFIG_IMX_CONFIG),)
-diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
-index 33c1f99..f45885d 100644
---- a/arch/arm/cpu/u-boot.lds
-+++ b/arch/arm/cpu/u-boot.lds
-@@ -7,6 +7,8 @@
-  * SPDX-License-Identifier:	GPL-2.0+
-  */
- 
-+#include <config.h>
-+
- OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
- OUTPUT_ARCH(arm)
- ENTRY(_start)
-@@ -22,6 +24,34 @@ SECTIONS
- 		*(.text*)
- 	}
- 
-+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) || defined(CONFIG_ARMV7_PSCI)
-+
-+#ifndef CONFIG_ARMV7_SECURE_BASE
-+#define CONFIG_ARMV7_SECURE_BASE
-+#endif
-+
-+	.__secure_start : {
-+		. = ALIGN(0x1000);
-+		*(.__secure_start)
-+	}
-+
-+	.secure_text CONFIG_ARMV7_SECURE_BASE :
-+		AT(ADDR(.__secure_start) + SIZEOF(.__secure_start))
-+	{
-+		*(._secure.text)
-+	}
-+
-+	. = LOADADDR(.__secure_start) +
-+		SIZEOF(.__secure_start) +
-+		SIZEOF(.secure_text);
-+
-+	__secure_end_lma = .;
-+	.__secure_end : AT(__secure_end_lma) {
-+		*(.__secure_end)
-+		LONG(0x1d1071c);	/* Must output something to reset LMA */
-+	}
-+#endif
-+
- 	. = ALIGN(4);
- 	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
- 
-diff --git a/arch/arm/lib/sections.c b/arch/arm/lib/sections.c
-index 5b30bcb..a1205c3 100644
---- a/arch/arm/lib/sections.c
-+++ b/arch/arm/lib/sections.c
-@@ -25,4 +25,6 @@ char __image_copy_start[0] __attribute__((section(".__image_copy_start")));
- char __image_copy_end[0] __attribute__((section(".__image_copy_end")));
- char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start")));
- char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end")));
-+char __secure_start[0] __attribute__((section(".__secure_start")));
-+char __secure_end[0] __attribute__((section(".__secure_end")));
- char _end[0] __attribute__((section(".__end")));
-From d7ebd8f57e84ea92ef0cf55080f0acec9c6d1ace Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Sat, 7 Dec 2013 11:19:12 +0000
-Subject: [PATCH] ARM: HYP/non-sec: allow relocation to secure RAM
-
-The current non-sec switching code suffers from one major issue:
-it cannot run in secure RAM, as a large part of u-boot still needs
-to be run while we're switched to non-secure.
-
-This patch reworks the whole HYP/non-secure strategy by:
-- making sure the secure code is the *last* thing u-boot executes
-  before entering the payload
-- performing an exception return from secure mode directly into
-  the payload
-- allowing the code to be dynamically relocated to secure RAM
-  before switching to non-secure.
-
-This involves quite a bit of horrible code, specially as u-boot
-relocation is quite primitive.
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- arch/arm/cpu/armv7/nonsec_virt.S | 161 +++++++++++++++++++--------------------
- arch/arm/cpu/armv7/virt-v7.c     |  59 +++++---------
- arch/arm/include/asm/armv7.h     |  10 ++-
- arch/arm/include/asm/secure.h    |  26 +++++++
- arch/arm/lib/bootm.c             |  22 +++---
- 5 files changed, 138 insertions(+), 140 deletions(-)
- create mode 100644 arch/arm/include/asm/secure.h
-
-diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
-index b5c946f..2a43e3c 100644
---- a/arch/arm/cpu/armv7/nonsec_virt.S
-+++ b/arch/arm/cpu/armv7/nonsec_virt.S
-@@ -10,10 +10,13 @@
- #include <linux/linkage.h>
- #include <asm/gic.h>
- #include <asm/armv7.h>
-+#include <asm/proc-armv/ptrace.h>
- 
- .arch_extension sec
- .arch_extension virt
- 
-+	.pushsection ._secure.text, "ax"
-+
- 	.align	5
- /* the vector table for secure state and HYP mode */
- _monitor_vectors:
-@@ -22,51 +25,86 @@ _monitor_vectors:
- 	adr pc, _secure_monitor
- 	.word 0
- 	.word 0
--	adr pc, _hyp_trap
-+	.word 0
- 	.word 0
- 	.word 0
- 
-+.macro is_cpu_virt_capable	tmp
-+	mrc	p15, 0, \tmp, c0, c1, 1		@ read ID_PFR1
-+	and	\tmp, \tmp, #CPUID_ARM_VIRT_MASK	@ mask virtualization bits
-+	cmp	\tmp, #(1 << CPUID_ARM_VIRT_SHIFT)
-+.endm
-+
- /*
-  * secure monitor handler
-  * U-boot calls this "software interrupt" in start.S
-  * This is executed on a "smc" instruction, we use a "smc #0" to switch
-  * to non-secure state.
-- * We use only r0 and r1 here, due to constraints in the caller.
-+ * r0, r1, r2: passed to the callee
-+ * ip: target PC
-  */
- _secure_monitor:
--	mrc	p15, 0, r1, c1, c1, 0		@ read SCR
--	bic	r1, r1, #0x4e			@ clear IRQ, FIQ, EA, nET bits
--	orr	r1, r1, #0x31			@ enable NS, AW, FW bits
-+	mrc	p15, 0, r5, c1, c1, 0		@ read SCR
-+	bic	r5, r5, #0x4e			@ clear IRQ, FIQ, EA, nET bits
-+	orr	r5, r5, #0x31			@ enable NS, AW, FW bits
- 
--	mrc	p15, 0, r0, c0, c1, 1		@ read ID_PFR1
--	and	r0, r0, #CPUID_ARM_VIRT_MASK	@ mask virtualization bits
--	cmp	r0, #(1 << CPUID_ARM_VIRT_SHIFT)
-+	mov	r6, #SVC_MODE			@ default mode is SVC
-+	is_cpu_virt_capable r4
- #ifdef CONFIG_ARMV7_VIRT
--	orreq	r1, r1, #0x100			@ allow HVC instruction
-+	orreq	r5, r5, #0x100			@ allow HVC instruction
-+	moveq	r6, #HYP_MODE			@ Enter the kernel as HYP
- #endif
- 
--	mcr	p15, 0, r1, c1, c1, 0		@ write SCR (with NS bit set)
-+	mcr	p15, 0, r5, c1, c1, 0		@ write SCR (with NS bit set)
- 	isb
- 
--#ifdef CONFIG_ARMV7_VIRT
--	mrceq	p15, 0, r0, c12, c0, 1		@ get MVBAR value
--	mcreq	p15, 4, r0, c12, c0, 0		@ write HVBAR
--#endif
- 	bne	1f
- 
- 	@ Reset CNTVOFF to 0 before leaving monitor mode
--	mrc	p15, 0, r0, c0, c1, 1		@ read ID_PFR1
--	ands	r0, r0, #CPUID_ARM_GENTIMER_MASK	@ test arch timer bits
--	movne	r0, #0
--	mcrrne	p15, 4, r0, r0, c14		@ Reset CNTVOFF to zero
-+	mrc	p15, 0, r4, c0, c1, 1		@ read ID_PFR1
-+	ands	r4, r4, #CPUID_ARM_GENTIMER_MASK	@ test arch timer bits
-+	movne	r4, #0
-+	mcrrne	p15, 4, r4, r4, c14		@ Reset CNTVOFF to zero
- 1:
--	movs	pc, lr				@ return to non-secure SVC
--
--_hyp_trap:
--	mrs	lr, elr_hyp	@ for older asm: .byte 0x00, 0xe3, 0x0e, 0xe1
--	mov pc, lr				@ do no switch modes, but
--						@ return to caller
--
-+	mov	lr, ip
-+	mov	ip, #(F_BIT | I_BIT | A_BIT)	@ Set A, I and F
-+	tst	lr, #1				@ Check for Thumb PC
-+	orrne	ip, ip, #T_BIT			@ Set T if Thumb
-+	orr	ip, ip, r6			@ Slot target mode in
-+	msr	spsr_cxfs, ip			@ Set full SPSR
-+	movs	pc, lr				@ ERET to non-secure
-+
-+ENTRY(_do_nonsec_entry)
-+	mov	ip, r0
-+	mov	r0, r1
-+	mov	r1, r2
-+	mov	r2, r3
-+	smc	#0
-+ENDPROC(_do_nonsec_entry)
-+
-+.macro get_cbar_addr	addr
-+#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
-+	ldr	\addr, =CONFIG_ARM_GIC_BASE_ADDRESS
-+#else
-+	mrc	p15, 4, \addr, c15, c0, 0	@ read CBAR
-+	bfc	\addr, #0, #15			@ clear reserved bits
-+#endif
-+.endm
-+
-+.macro get_gicd_addr	addr
-+	get_cbar_addr	\addr
-+	add	\addr, \addr, #GIC_DIST_OFFSET	@ GIC dist i/f offset
-+.endm
-+
-+.macro get_gicc_addr	addr, tmp
-+	get_cbar_addr	\addr
-+	is_cpu_virt_capable \tmp
-+	movne	\tmp, #GIC_CPU_OFFSET_A9	@ GIC CPU offset for A9
-+	moveq	\tmp, #GIC_CPU_OFFSET_A15	@ GIC CPU offset for A15/A7
-+	add	\addr, \addr, \tmp
-+.endm
-+
-+#ifndef CONFIG_ARMV7_PSCI
- /*
-  * Secondary CPUs start here and call the code for the core specific parts
-  * of the non-secure and HYP mode transition. The GIC distributor specific
-@@ -74,31 +112,21 @@ _hyp_trap:
-  * Then they go back to wfi and wait to be woken up by the kernel again.
-  */
- ENTRY(_smp_pen)
--	mrs	r0, cpsr
--	orr	r0, r0, #0xc0
--	msr	cpsr, r0			@ disable interrupts
--	ldr	r1, =_start
--	mcr	p15, 0, r1, c12, c0, 0		@ set VBAR
-+	cpsid	i
-+	cpsid	f
- 
- 	bl	_nonsec_init
--	mov	r12, r0				@ save GICC address
--#ifdef CONFIG_ARMV7_VIRT
--	bl	_switch_to_hyp
--#endif
--
--	ldr	r1, [r12, #GICC_IAR]		@ acknowledge IPI
--	str	r1, [r12, #GICC_EOIR]		@ signal end of interrupt
- 
- 	adr	r0, _smp_pen			@ do not use this address again
- 	b	smp_waitloop			@ wait for IPIs, board specific
- ENDPROC(_smp_pen)
-+#endif
- 
- /*
-  * Switch a core to non-secure state.
-  *
-  *  1. initialize the GIC per-core interface
-  *  2. allow coprocessor access in non-secure modes
-- *  3. switch the cpu mode (by calling "smc #0")
-  *
-  * Called from smp_pen by secondary cores and directly by the BSP.
-  * Do not assume that the stack is available and only use registers
-@@ -108,38 +136,23 @@ ENDPROC(_smp_pen)
-  * though, but we check this in C before calling this function.
-  */
- ENTRY(_nonsec_init)
--#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
--	ldr	r2, =CONFIG_ARM_GIC_BASE_ADDRESS
--#else
--	mrc	p15, 4, r2, c15, c0, 0		@ read CBAR
--	bfc	r2, #0, #15			@ clear reserved bits
--#endif
--	add	r3, r2, #GIC_DIST_OFFSET	@ GIC dist i/f offset
-+	get_gicd_addr	r3
-+
- 	mvn	r1, #0				@ all bits to 1
- 	str	r1, [r3, #GICD_IGROUPRn]	@ allow private interrupts
- 
--	mrc	p15, 0, r0, c0, c0, 0		@ read MIDR
--	ldr	r1, =MIDR_PRIMARY_PART_MASK
--	and	r0, r0, r1			@ mask out variant and revision
-+	get_gicc_addr	r3, r1
- 
--	ldr	r1, =MIDR_CORTEX_A7_R0P0 & MIDR_PRIMARY_PART_MASK
--	cmp	r0, r1				@ check for Cortex-A7
--
--	ldr	r1, =MIDR_CORTEX_A15_R0P0 & MIDR_PRIMARY_PART_MASK
--	cmpne	r0, r1				@ check for Cortex-A15
--
--	movne	r1, #GIC_CPU_OFFSET_A9		@ GIC CPU offset for A9
--	moveq	r1, #GIC_CPU_OFFSET_A15		@ GIC CPU offset for A15/A7
--	add	r3, r2, r1			@ r3 = GIC CPU i/f addr
--
--	mov	r1, #1				@ set GICC_CTLR[enable]
-+	mov	r1, #3				@ Enable both groups
- 	str	r1, [r3, #GICC_CTLR]		@ and clear all other bits
- 	mov	r1, #0xff
- 	str	r1, [r3, #GICC_PMR]		@ set priority mask register
- 
-+	mrc	p15, 0, r0, c1, c1, 2
- 	movw	r1, #0x3fff
--	movt	r1, #0x0006
--	mcr	p15, 0, r1, c1, c1, 2		@ NSACR = all copros to non-sec
-+	movt	r1, #0x0004
-+	orr	r0, r0, r1
-+	mcr	p15, 0, r0, c1, c1, 2		@ NSACR = all copros to non-sec
- 
- /* The CNTFRQ register of the generic timer needs to be
-  * programmed in secure state. Some primary bootloaders / firmware
-@@ -157,21 +170,9 @@ ENTRY(_nonsec_init)
- 
- 	adr	r1, _monitor_vectors
- 	mcr	p15, 0, r1, c12, c0, 1		@ set MVBAR to secure vectors
--
--	mrc	p15, 0, ip, c12, c0, 0		@ save secure copy of VBAR
--
- 	isb
--	smc	#0				@ call into MONITOR mode
--
--	mcr	p15, 0, ip, c12, c0, 0		@ write non-secure copy of VBAR
--
--	mov	r1, #1
--	str	r1, [r3, #GICC_CTLR]		@ enable non-secure CPU i/f
--	add	r2, r2, #GIC_DIST_OFFSET
--	str	r1, [r2, #GICD_CTLR]		@ allow private interrupts
- 
- 	mov	r0, r3				@ return GICC address
--
- 	bx	lr
- ENDPROC(_nonsec_init)
- 
-@@ -183,18 +184,10 @@ ENTRY(smp_waitloop)
- 	ldr	r1, [r1]
- 	cmp	r0, r1			@ make sure we dont execute this code
- 	beq	smp_waitloop		@ again (due to a spurious wakeup)
--	mov	pc, r1
-+	mov	r0, r1
-+	b	_do_nonsec_entry
- ENDPROC(smp_waitloop)
- .weak smp_waitloop
- #endif
- 
--ENTRY(_switch_to_hyp)
--	mov	r0, lr
--	mov	r1, sp				@ save SVC copy of LR and SP
--	isb
--	hvc #0			 @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
--	mov	sp, r1
--	mov	lr, r0				@ restore SVC copy of LR and SP
--
--	bx	lr
--ENDPROC(_switch_to_hyp)
-+	.popsection
-diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
-index 2cd604f..6500030 100644
---- a/arch/arm/cpu/armv7/virt-v7.c
-+++ b/arch/arm/cpu/armv7/virt-v7.c
-@@ -13,17 +13,10 @@
- #include <asm/armv7.h>
- #include <asm/gic.h>
- #include <asm/io.h>
-+#include <asm/secure.h>
- 
- unsigned long gic_dist_addr;
- 
--static unsigned int read_cpsr(void)
--{
--	unsigned int reg;
--
--	asm volatile ("mrs %0, cpsr\n" : "=r" (reg));
--	return reg;
--}
--
- static unsigned int read_id_pfr1(void)
- {
- 	unsigned int reg;
-@@ -72,6 +65,18 @@ static unsigned long get_gicd_base_address(void)
- #endif
- }
- 
-+static void relocate_secure_section(void)
-+{
-+#ifdef CONFIG_ARMV7_SECURE_BASE
-+	size_t sz = __secure_end - __secure_start;
-+
-+	memcpy((void *)CONFIG_ARMV7_SECURE_BASE, __secure_start, sz);
-+	flush_dcache_range(CONFIG_ARMV7_SECURE_BASE,
-+			   CONFIG_ARMV7_SECURE_BASE + sz + 1);
-+	invalidate_icache_all();
-+#endif
-+}
-+
- static void kick_secondary_cpus_gic(unsigned long gicdaddr)
- {
- 	/* kick all CPUs (except this one) by writing to GICD_SGIR */
-@@ -83,35 +88,7 @@ void __weak smp_kick_all_cpus(void)
- 	kick_secondary_cpus_gic(gic_dist_addr);
- }
- 
--int armv7_switch_hyp(void)
--{
--	unsigned int reg;
--
--	/* check whether we are in HYP mode already */
--	if ((read_cpsr() & 0x1f) == 0x1a) {
--		debug("CPU already in HYP mode\n");
--		return 0;
--	}
--
--	/* check whether the CPU supports the virtualization extensions */
--	reg = read_id_pfr1();
--	if ((reg & CPUID_ARM_VIRT_MASK) != 1 << CPUID_ARM_VIRT_SHIFT) {
--		printf("HYP mode: Virtualization extensions not implemented.\n");
--		return -1;
--	}
--
--	/* call the HYP switching code on this CPU also */
--	_switch_to_hyp();
--
--	if ((read_cpsr() & 0x1F) != 0x1a) {
--		printf("HYP mode: switch not successful.\n");
--		return -1;
--	}
--
--	return 0;
--}
--
--int armv7_switch_nonsec(void)
-+int armv7_init_nonsec(void)
- {
- 	unsigned int reg;
- 	unsigned itlinesnr, i;
-@@ -147,11 +124,13 @@ int armv7_switch_nonsec(void)
- 	for (i = 1; i <= itlinesnr; i++)
- 		writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
- 
--	smp_set_core_boot_addr((unsigned long)_smp_pen, -1);
-+#ifndef CONFIG_ARMV7_PSCI
-+	smp_set_core_boot_addr((unsigned long)secure_ram_addr(_smp_pen), -1);
- 	smp_kick_all_cpus();
-+#endif
- 
- 	/* call the non-sec switching code on this CPU also */
--	_nonsec_init();
--
-+	relocate_secure_section();
-+	secure_ram_addr(_nonsec_init)();
- 	return 0;
- }
-diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
-index 395444e..11476dd 100644
---- a/arch/arm/include/asm/armv7.h
-+++ b/arch/arm/include/asm/armv7.h
-@@ -78,13 +78,17 @@ void v7_outer_cache_inval_range(u32 start, u32 end);
- 
- #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
- 
--int armv7_switch_nonsec(void);
--int armv7_switch_hyp(void);
-+int armv7_init_nonsec(void);
- 
- /* defined in assembly file */
- unsigned int _nonsec_init(void);
-+void _do_nonsec_entry(void *target_pc, unsigned long r0,
-+		      unsigned long r1, unsigned long r2);
- void _smp_pen(void);
--void _switch_to_hyp(void);
-+
-+extern char __secure_start[];
-+extern char __secure_end[];
-+
- #endif /* CONFIG_ARMV7_NONSEC || CONFIG_ARMV7_VIRT */
- 
- #endif /* ! __ASSEMBLY__ */
-diff --git a/arch/arm/include/asm/secure.h b/arch/arm/include/asm/secure.h
-new file mode 100644
-index 0000000..effdb18
---- /dev/null
-+++ b/arch/arm/include/asm/secure.h
-@@ -0,0 +1,26 @@
-+#ifndef __ASM_SECURE_H
-+#define __ASM_SECURE_H
-+
-+#include <config.h>
-+
-+#ifdef CONFIG_ARMV7_SECURE_BASE
-+/*
-+ * Warning, horror ahead.
-+ *
-+ * The target code lives in our "secure ram", but u-boot doesn't know
-+ * that, and has blindly added reloc_off to every relocation
-+ * entry. Gahh. Do the opposite conversion. This hack also prevents
-+ * GCC from generating code veeners, which u-boot doesn't relocate at
-+ * all...
-+ */
-+#define secure_ram_addr(_fn) ({						\
-+			DECLARE_GLOBAL_DATA_PTR;			\
-+			void *__fn = _fn;				\
-+			typeof(_fn) *__tmp = (__fn - gd->reloc_off);	\
-+			__tmp;						\
-+		})
-+#else
-+#define secure_ram_addr(_fn)	(_fn)
-+#endif
-+
-+#endif
-diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
-index 10634a4..61aa14e 100644
---- a/arch/arm/lib/bootm.c
-+++ b/arch/arm/lib/bootm.c
-@@ -20,6 +20,7 @@
- #include <libfdt.h>
- #include <fdt_support.h>
- #include <asm/bootm.h>
-+#include <asm/secure.h>
- #include <linux/compiler.h>
- 
- #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
-@@ -184,27 +185,17 @@ static void setup_end_tag(bd_t *bd)
- 
- __weak void setup_board_tags(struct tag **in_params) {}
- 
-+#ifdef CONFIG_ARM64
- static void do_nonsec_virt_switch(void)
- {
--#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
--	if (armv7_switch_nonsec() == 0)
--#ifdef CONFIG_ARMV7_VIRT
--		if (armv7_switch_hyp() == 0)
--			debug("entered HYP mode\n");
--#else
--		debug("entered non-secure state\n");
--#endif
--#endif
--
--#ifdef CONFIG_ARM64
- 	smp_kick_all_cpus();
- 	flush_dcache_all();	/* flush cache before swtiching to EL2 */
- 	armv8_switch_to_el2();
- #ifdef CONFIG_ARMV8_SWITCH_TO_EL1
- 	armv8_switch_to_el1();
- #endif
--#endif
- }
-+#endif
- 
- /* Subcommand: PREP */
- static void boot_prep_linux(bootm_headers_t *images)
-@@ -287,8 +278,13 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)
- 		r2 = gd->bd->bi_boot_params;
- 
- 	if (!fake) {
--		do_nonsec_virt_switch();
-+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
-+		armv7_init_nonsec();
-+		secure_ram_addr(_do_nonsec_entry)(kernel_entry,
-+						  0, machid, r2);
-+#else
- 		kernel_entry(0, machid, r2);
-+#endif
- 	}
- #endif
- }
-From 8ea1554da4a6e556d3213a77cf59daa1c154bdb5 Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Sat, 7 Dec 2013 11:19:13 +0000
-Subject: [PATCH] ARM: HYP/non-sec: add generic ARMv7 PSCI code
-
-Implement core support for PSCI. As this is generic code, it doesn't
-implement anything really useful (all the functions are returning
-Not Implemented).
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- arch/arm/cpu/armv7/Makefile |   4 ++
- arch/arm/cpu/armv7/psci.S   | 105 ++++++++++++++++++++++++++++++++++++++++++++
- arch/arm/include/asm/psci.h |  35 +++++++++++++++
- 3 files changed, 144 insertions(+)
- create mode 100644 arch/arm/cpu/armv7/psci.S
- create mode 100644 arch/arm/include/asm/psci.h
-
-diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
-index 6f17771..0cf5c45 100644
---- a/arch/arm/cpu/armv7/Makefile
-+++ b/arch/arm/cpu/armv7/Makefile
-@@ -24,6 +24,10 @@ obj-y	+= nonsec_virt.o
- obj-y	+= virt-v7.o
- endif
- 
-+ifneq ($(CONFIG_ARMV7_PSCI),)
-+obj-y	+= psci.o
-+endif
-+
- obj-$(CONFIG_KONA) += kona-common/
- obj-$(CONFIG_OMAP_COMMON) += omap-common/
- obj-$(CONFIG_TEGRA) += tegra-common/
-diff --git a/arch/arm/cpu/armv7/psci.S b/arch/arm/cpu/armv7/psci.S
-new file mode 100644
-index 0000000..a9341e0
---- /dev/null
-+++ b/arch/arm/cpu/armv7/psci.S
-@@ -0,0 +1,105 @@
-+/*
-+ * Copyright (C) 2013 - ARM Ltd
-+ * Author: Marc Zyngier <marc.zyngier@arm.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <config.h>
-+#include <linux/linkage.h>
-+#include <asm/psci.h>
-+
-+	.pushsection ._secure.text, "ax"
-+
-+	.arch_extension	sec
-+
-+	.align	5
-+	.globl _psci_vectors
-+_psci_vectors:
-+	b	default_psci_vector	@ reset
-+	b	default_psci_vector	@ undef
-+	b	_smc_psci		@ smc
-+	b	default_psci_vector	@ pabort
-+	b	default_psci_vector	@ dabort
-+	b	default_psci_vector	@ hyp
-+	b	default_psci_vector	@ irq
-+	b	psci_fiq_enter		@ fiq
-+
-+ENTRY(psci_fiq_enter)
-+	movs	pc, lr
-+ENDPROC(psci_fiq_enter)
-+.weak psci_fiq_enter
-+
-+ENTRY(default_psci_vector)
-+	movs	pc, lr
-+ENDPROC(default_psci_vector)
-+.weak default_psci_vector
-+
-+ENTRY(psci_cpu_suspend)
-+ENTRY(psci_cpu_off)
-+ENTRY(psci_cpu_on)
-+ENTRY(psci_migrate)
-+	mov	r0, #ARM_PSCI_RET_NI	@ Return -1 (Not Implemented)
-+	mov	pc, lr
-+ENDPROC(psci_migrate)
-+ENDPROC(psci_cpu_on)
-+ENDPROC(psci_cpu_off)
-+ENDPROC(psci_cpu_suspend)
-+.weak psci_cpu_suspend
-+.weak psci_cpu_off
-+.weak psci_cpu_on
-+.weak psci_migrate
-+
-+_psci_table:
-+	.word	ARM_PSCI_FN_CPU_SUSPEND
-+	.word	psci_cpu_suspend
-+	.word	ARM_PSCI_FN_CPU_OFF
-+	.word	psci_cpu_off
-+	.word	ARM_PSCI_FN_CPU_ON
-+	.word	psci_cpu_on
-+	.word	ARM_PSCI_FN_MIGRATE
-+	.word	psci_migrate
-+	.word	0
-+	.word	0
-+
-+_smc_psci:
-+	push	{r3-r7,lr}
-+
-+	@ Switch to secure
-+	mrc	p15, 0, r7, c1, c1, 0
-+	bic	r4, r7, #1
-+	mcr	p15, 0, r4, c1, c1, 0
-+	isb
-+
-+	adr	r4, _psci_table
-+1:	ldr	r5, [r4]	@ Load PSCI function ID
-+	ldr	r6, [r4, #4]	@ Load target PC
-+	cmp	r5, #0		@ If reach the end, bail out
-+	mvneq	r0, #0		@ Return -1 (Not Implemented)
-+	beq	2f
-+	cmp	r0, r5		@ If not matching, try next entry
-+	addne	r4, r4, #8
-+	bne	1b
-+	cmp	r6, #0		@ Not implemented
-+	moveq	r0, #ARM_PSCI_RET_NI
-+	beq	2f
-+
-+	blx	r6		@ Execute PSCI function
-+
-+	@ Switch back to non-secure
-+	mcr	p15, 0, r7, c1, c1, 0
-+
-+2:	pop	{r3-r7, lr}
-+	movs	pc, lr		@ Return to the kernel
-+
-+	.popsection
-diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h
-new file mode 100644
-index 0000000..704b4b0
---- /dev/null
-+++ b/arch/arm/include/asm/psci.h
-@@ -0,0 +1,35 @@
-+/*
-+ * Copyright (C) 2013 - ARM Ltd
-+ * Author: Marc Zyngier <marc.zyngier@arm.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef __ARM_PSCI_H__
-+#define __ARM_PSCI_H__
-+
-+/* PSCI interface */
-+#define ARM_PSCI_FN_BASE		0x95c1ba5e
-+#define ARM_PSCI_FN(n)			(ARM_PSCI_FN_BASE + (n))
-+
-+#define ARM_PSCI_FN_CPU_SUSPEND		ARM_PSCI_FN(0)
-+#define ARM_PSCI_FN_CPU_OFF		ARM_PSCI_FN(1)
-+#define ARM_PSCI_FN_CPU_ON		ARM_PSCI_FN(2)
-+#define ARM_PSCI_FN_MIGRATE		ARM_PSCI_FN(3)
-+
-+#define ARM_PSCI_RET_SUCCESS		0
-+#define ARM_PSCI_RET_NI			(-1)
-+#define ARM_PSCI_RET_INVAL		(-2)
-+#define ARM_PSCI_RET_DENIED		(-3)
-+
-+#endif /* __ARM_PSCI_H__ */
-From 0ca6171c385fed00125b320592ee94922f44f13a Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Sat, 7 Dec 2013 11:19:14 +0000
-Subject: [PATCH] ARM: HYP/non-sec: add the option for a second-stage monitor
-
-Allow the switch to a second stage secure monitor just before
-switching to non-secure.
-
-This allows a resident piece of firmware to be active once the
-kernel has been entered (the u-boot monitor is dead anyway,
-its pages being reused).
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- arch/arm/cpu/armv7/nonsec_virt.S | 13 +++++++++++--
- 1 file changed, 11 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
-index 2a43e3c..745670e 100644
---- a/arch/arm/cpu/armv7/nonsec_virt.S
-+++ b/arch/arm/cpu/armv7/nonsec_virt.S
-@@ -44,10 +44,19 @@ _monitor_vectors:
-  * ip: target PC
-  */
- _secure_monitor:
-+#ifdef CONFIG_ARMV7_PSCI
-+	ldr	r5, =_psci_vectors		@ Switch to the next monitor
-+	mcr	p15, 0, r5, c12, c0, 1
-+	isb
-+
-+	@ Obtain a secure stack, and configure the PSCI backend
-+	bl	psci_arch_init
-+#endif
-+
- 	mrc	p15, 0, r5, c1, c1, 0		@ read SCR
--	bic	r5, r5, #0x4e			@ clear IRQ, FIQ, EA, nET bits
-+	bic	r5, r5, #0x4a			@ clear IRQ, EA, nET bits
- 	orr	r5, r5, #0x31			@ enable NS, AW, FW bits
--
-+						@ FIQ preserved for secure mode
- 	mov	r6, #SVC_MODE			@ default mode is SVC
- 	is_cpu_virt_capable r4
- #ifdef CONFIG_ARMV7_VIRT
-From 9aa373162eb2cc0055a6e4ecd46977c911de1124 Mon Sep 17 00:00:00 2001
-From: Ma Haijun <mahaijuns@gmail.com>
-Date: Sat, 15 Feb 2014 12:51:10 +0000
-Subject: [PATCH] ARM: convert arch_fixup_memory_node to a generic FDT fixup
- function
-
-Some architecture needs extra device tree setup. Instead of adding
-yet another hook, convert arch_fixup_memory_node to be a generic
-FDT fixup function.
-
-[maz: collapsed 3 patches into one, rewrote commit message]
-
-Signed-off-by: Ma Haijun <mahaijuns@gmail.com>
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- arch/arm/lib/bootm-fdt.c | 2 +-
- arch/arm/lib/bootm.c     | 2 +-
- common/image-fdt.c       | 7 +++++--
- include/common.h         | 6 +++---
- 4 files changed, 10 insertions(+), 7 deletions(-)
-
-diff --git a/arch/arm/lib/bootm-fdt.c b/arch/arm/lib/bootm-fdt.c
-index e40691d..8394e15 100644
---- a/arch/arm/lib/bootm-fdt.c
-+++ b/arch/arm/lib/bootm-fdt.c
-@@ -20,7 +20,7 @@
- 
- DECLARE_GLOBAL_DATA_PTR;
- 
--int arch_fixup_memory_node(void *blob)
-+int arch_fixup_fdt(void *blob)
- {
- 	bd_t *bd = gd->bd;
- 	int bank;
-diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
-index 61aa14e..4cff6b0 100644
---- a/arch/arm/lib/bootm.c
-+++ b/arch/arm/lib/bootm.c
-@@ -357,7 +357,7 @@ void boot_prep_vxworks(bootm_headers_t *images)
- 	if (images->ft_addr) {
- 		off = fdt_path_offset(images->ft_addr, "/memory");
- 		if (off < 0) {
--			if (arch_fixup_memory_node(images->ft_addr))
-+			if (arch_fixup_fdt(images->ft_addr))
- 				puts("## WARNING: fixup memory failed!\n");
- 		}
- 	}
-diff --git a/common/image-fdt.c b/common/image-fdt.c
-index a54a919..6f074de 100644
---- a/common/image-fdt.c
-+++ b/common/image-fdt.c
-@@ -445,7 +445,7 @@ __weak int ft_verify_fdt(void *fdt)
- 	return 1;
- }
- 
--__weak int arch_fixup_memory_node(void *blob)
-+__weak int arch_fixup_fdt(void *blob)
- {
- 	return 0;
- }
-@@ -462,7 +462,10 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob,
- 		puts(" - must RESET the board to recover.\n");
- 		return -1;
- 	}
--	arch_fixup_memory_node(blob);
-+	if (arch_fixup_fdt(blob) < 0) {
-+		puts("ERROR: arch specific fdt fixup failed");
-+		return -1;
-+	}
- 	if (IMAGE_OF_BOARD_SETUP)
- 		ft_board_setup(blob, gd->bd);
- 	fdt_fixup_ethernet(blob);
-diff --git a/include/common.h b/include/common.h
-index cbd3c9e..700b015 100644
---- a/include/common.h
-+++ b/include/common.h
-@@ -326,14 +326,14 @@ int arch_early_init_r(void);
- void board_show_dram(ulong size);
- 
- /**
-- * arch_fixup_memory_node() - Write arch-specific memory information to fdt
-+ * arch_fixup_fdt() - Write arch-specific information to fdt
-  *
-- * Defined in arch/$(ARCH)/lib/bootm.c
-+ * Defined in arch/$(ARCH)/lib/bootm-fdt.c
-  *
-  * @blob:	FDT blob to write to
-  * @return 0 if ok, or -ve FDT_ERR_... on failure
-  */
--int arch_fixup_memory_node(void *blob);
-+int arch_fixup_fdt(void *blob);
- 
- /* common/flash.c */
- void flash_perror (int);
-From ccdf689da800c9f1c5226146e936b071c7ec8800 Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Sat, 7 Dec 2013 11:19:15 +0000
-Subject: [PATCH] ARM: HYP/non-sec/PSCI: emit DT nodes
-
-Generate the PSCI node in the device tree.
-
-Also add a reserve section for the "secure" code that lives in
-in normal RAM, so that the kernel knows it'd better not trip on
-it.
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- arch/arm/cpu/armv7/Makefile  |   1 +
- arch/arm/cpu/armv7/virt-dt.c | 100 +++++++++++++++++++++++++++++++++++++++++++
- arch/arm/include/asm/armv7.h |   1 +
- arch/arm/lib/bootm-fdt.c     |  11 ++++-
- 4 files changed, 111 insertions(+), 2 deletions(-)
- create mode 100644 arch/arm/cpu/armv7/virt-dt.c
-
-diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
-index 0cf5c45..93a5a69 100644
---- a/arch/arm/cpu/armv7/Makefile
-+++ b/arch/arm/cpu/armv7/Makefile
-@@ -22,6 +22,7 @@ endif
- ifneq ($(CONFIG_ARMV7_NONSEC)$(CONFIG_ARMV7_VIRT),)
- obj-y	+= nonsec_virt.o
- obj-y	+= virt-v7.o
-+obj-y	+= virt-dt.o
- endif
- 
- ifneq ($(CONFIG_ARMV7_PSCI),)
-diff --git a/arch/arm/cpu/armv7/virt-dt.c b/arch/arm/cpu/armv7/virt-dt.c
-new file mode 100644
-index 0000000..0b0d6a7
---- /dev/null
-+++ b/arch/arm/cpu/armv7/virt-dt.c
-@@ -0,0 +1,100 @@
-+/*
-+ * Copyright (C) 2013 - ARM Ltd
-+ * Author: Marc Zyngier <marc.zyngier@arm.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <common.h>
-+#include <stdio_dev.h>
-+#include <linux/ctype.h>
-+#include <linux/types.h>
-+#include <asm/global_data.h>
-+#include <libfdt.h>
-+#include <fdt_support.h>
-+#include <asm/armv7.h>
-+#include <asm/psci.h>
-+
-+static int fdt_psci(void *fdt)
-+{
-+#ifdef CONFIG_ARMV7_PSCI
-+	int nodeoff;
-+	int tmp;
-+
-+	nodeoff = fdt_path_offset(fdt, "/cpus");
-+	if (nodeoff < 0) {
-+		printf("couldn't find /cpus\n");
-+		return nodeoff;
-+	}
-+
-+	/* add 'enable-method = "psci"' to each cpu node */
-+	for (tmp = fdt_first_subnode(fdt, nodeoff);
-+	     tmp >= 0;
-+	     tmp = fdt_next_subnode(fdt, tmp)) {
-+		const struct fdt_property *prop;
-+		int len;
-+
-+		prop = fdt_get_property(fdt, tmp, "device_type", &len);
-+		if (!prop)
-+			continue;
-+		if (len < 4)
-+			continue;
-+		if (strcmp(prop->data, "cpu"))
-+			continue;
-+
-+		fdt_setprop_string(fdt, tmp, "enable-method", "psci");
-+	}
-+
-+	nodeoff = fdt_path_offset(fdt, "/psci");
-+	if (nodeoff < 0) {
-+		nodeoff = fdt_path_offset(fdt, "/");
-+		if (nodeoff < 0)
-+			return nodeoff;
-+
-+		nodeoff = fdt_add_subnode(fdt, nodeoff, "psci");
-+		if (nodeoff < 0)
-+			return nodeoff;
-+	}
-+
-+	tmp = fdt_setprop_string(fdt, nodeoff, "compatible", "arm,psci");
-+	if (tmp)
-+		return tmp;
-+	tmp = fdt_setprop_string(fdt, nodeoff, "method", "smc");
-+	if (tmp)
-+		return tmp;
-+	tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_suspend", ARM_PSCI_FN_CPU_SUSPEND);
-+	if (tmp)
-+		return tmp;
-+	tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_off", ARM_PSCI_FN_CPU_OFF);
-+	if (tmp)
-+		return tmp;
-+	tmp = fdt_setprop_u32(fdt, nodeoff, "cpu_on", ARM_PSCI_FN_CPU_ON);
-+	if (tmp)
-+		return tmp;
-+	tmp = fdt_setprop_u32(fdt, nodeoff, "migrate", ARM_PSCI_FN_MIGRATE);
-+	if (tmp)
-+		return tmp;
-+#endif
-+	return 0;
-+}
-+
-+int armv7_update_dt(void *fdt)
-+{
-+#ifndef CONFIG_ARMV7_SECURE_BASE
-+	/* secure code lives in RAM, keep it alive */
-+	fdt_add_mem_rsv(fdt, (unsigned long)__secure_start,
-+			__secure_end - __secure_start);
-+#endif
-+
-+	return fdt_psci(fdt);
-+}
-diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
-index 11476dd..323f282 100644
---- a/arch/arm/include/asm/armv7.h
-+++ b/arch/arm/include/asm/armv7.h
-@@ -79,6 +79,7 @@ void v7_outer_cache_inval_range(u32 start, u32 end);
- #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
- 
- int armv7_init_nonsec(void);
-+int armv7_update_dt(void *fdt);
- 
- /* defined in assembly file */
- unsigned int _nonsec_init(void);
-diff --git a/arch/arm/lib/bootm-fdt.c b/arch/arm/lib/bootm-fdt.c
-index 8394e15..ccb76c7 100644
---- a/arch/arm/lib/bootm-fdt.c
-+++ b/arch/arm/lib/bootm-fdt.c
-@@ -17,13 +17,14 @@
- 
- #include <common.h>
- #include <fdt_support.h>
-+#include <asm/armv7.h>
- 
- DECLARE_GLOBAL_DATA_PTR;
- 
- int arch_fixup_fdt(void *blob)
- {
- 	bd_t *bd = gd->bd;
--	int bank;
-+	int bank, ret;
- 	u64 start[CONFIG_NR_DRAM_BANKS];
- 	u64 size[CONFIG_NR_DRAM_BANKS];
- 
-@@ -32,5 +33,11 @@ int arch_fixup_fdt(void *blob)
- 		size[bank] = bd->bi_dram[bank].size;
- 	}
- 
--	return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
-+	ret = fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
-+	if (ret)
-+		return ret;
-+
-+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
-+	return armv7_update_dt(blob);
-+#endif
- }
-From d5ee64675e6481e4f29e48e494ea132cd74786c8 Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Sat, 7 Dec 2013 11:19:17 +0000
-Subject: [PATCH] sunxi: HYP/non-sec: add sun7i PSCI backend
-
-So far, only supporting the CPU_ON method.
-Other functions can be added later.
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- arch/arm/cpu/armv7/sunxi/Makefile |   3 +
- arch/arm/cpu/armv7/sunxi/psci.S   | 162 ++++++++++++++++++++++++++++++++++++++
- include/configs/sun7i.h           |   6 ++
- 3 files changed, 171 insertions(+)
- create mode 100644 arch/arm/cpu/armv7/sunxi/psci.S
-
-diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
-index 19e4b17..0df6772 100644
---- a/arch/arm/cpu/armv7/sunxi/Makefile
-+++ b/arch/arm/cpu/armv7/sunxi/Makefile
-@@ -32,6 +32,9 @@ obj-y	+= cpu_info.o
- ifdef CONFIG_CMD_WATCHDOG
- obj-$(CONFIG_CMD_WATCHDOG)	+= cmd_watchdog.o
- endif
-+ifdef CONFIG_ARMV7_PSCI
-+obj-y	+= psci.o
-+endif
- endif
- 
- ifdef CONFIG_SPL_BUILD
-diff --git a/arch/arm/cpu/armv7/sunxi/psci.S b/arch/arm/cpu/armv7/sunxi/psci.S
-new file mode 100644
-index 0000000..0084c81
---- /dev/null
-+++ b/arch/arm/cpu/armv7/sunxi/psci.S
-@@ -0,0 +1,162 @@
-+/*
-+ * Copyright (C) 2013 - ARM Ltd
-+ * Author: Marc Zyngier <marc.zyngier@arm.com>
-+ *
-+ * Based on code by Carl van Schaik <carl@ok-labs.com>.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <config.h>
-+#include <asm/psci.h>
-+#include <asm/arch/cpu.h>
-+
-+/*
-+ * Memory layout:
-+ *
-+ * SECURE_RAM to text_end :
-+ *	._secure_text section
-+ * text_end to ALIGN_PAGE(text_end):
-+ *	nothing
-+ * ALIGN_PAGE(text_end) to ALIGN_PAGE(text_end) + 0x1000)
-+ *	1kB of stack per CPU (4 CPUs max).
-+ */
-+
-+	.pushsection ._secure.text, "ax"
-+
-+	.arch_extension sec
-+
-+#define	ONE_MS			(CONFIG_SYS_CLK_FREQ / 1000)
-+#define	TEN_MS			(10 * ONE_MS)
-+
-+.macro	timer_wait	reg, ticks
-+	@ Program CNTP_TVAL
-+	movw	\reg, #(\ticks & 0xffff)
-+	movt	\reg, #(\ticks >> 16)
-+	mcr	p15, 0, \reg, c14, c2, 0
-+	isb
-+	@ Enable physical timer, mask interrupt
-+	mov	\reg, #3
-+	mcr	p15, 0, \reg, c14, c2, 1
-+	@ Poll physical timer until ISTATUS is on
-+1:	isb
-+	mrc	p15, 0, \reg, c14, c2, 1
-+	ands	\reg, \reg, #4
-+	bne	1b
-+	@ Disable timer
-+	mov	\reg, #0
-+	mcr	p15, 0, \reg, c14, c2, 1
-+	isb
-+.endm
-+
-+.globl	psci_arch_init
-+psci_arch_init:
-+	mrc	p15, 0, r5, c1, c1, 0	@ Read SCR
-+	bic	r5, r5, #1		@ Secure mode
-+	mcr	p15, 0, r5, c1, c1, 0	@ Write SCR
-+	isb
-+
-+	mrc	p15, 0, r4, c0, c0, 5	@ MPIDR
-+	and	r4, r4, #3		@ cpu number in cluster
-+	mov	r5, #400		@ 1kB of stack per CPU
-+	mul	r4, r4, r5
-+
-+	adr	r5, text_end		@ end of text
-+	add	r5, r5, #0x2000		@ Skip two pages
-+	lsr	r5, r5, #12		@ Align to start of page
-+	lsl	r5, r5, #12
-+	sub	sp, r5, r4		@ here's our stack!
-+
-+	bx	lr
-+
-+	@ r1 = target CPU
-+	@ r2 = target PC
-+.globl	psci_cpu_on
-+psci_cpu_on:
-+	adr	r0, _target_pc
-+	str	r2, [r0]
-+	dsb
-+
-+	movw	r0, #(SUNXI_CPUCFG_BASE & 0xffff)
-+	movt	r0, #(SUNXI_CPUCFG_BASE >> 16)
-+
-+	@ CPU mask
-+	and	r1, r1, #3	@ only care about first cluster
-+	mov	r4, #1
-+	lsl	r4, r4, r1
-+
-+	adr	r6, _sunxi_cpu_entry
-+	str	r6, [r0, #0x1a4] @ PRIVATE_REG (boot vector)
-+
-+	@ Assert reset on target CPU
-+	mov	r6, #0
-+	lsl	r5, r1, #6	@ 64 bytes per CPU
-+	add	r5, r5, #0x40	@ Offset from base
-+	add	r5, r5, r0	@ CPU control block
-+	str	r6, [r5]	@ Reset CPU
-+
-+	@ l1 invalidate
-+	ldr	r6, [r0, #0x184]
-+	bic	r6, r6, r4
-+	str	r6, [r0, #0x184]
-+
-+	@ Lock CPU
-+	ldr	r6, [r0, #0x1e4]
-+	bic	r6, r6, r4
-+	str	r6, [r0, #0x1e4]
-+
-+	@ Release power clamp
-+	movw	r6, #0x1ff
-+	movt	r6, #0
-+1:	lsrs	r6, r6, #1
-+	str	r6, [r0, #0x1b0]
-+	bne	1b
-+
-+	timer_wait r1, TEN_MS
-+
-+	@ Clear power gating
-+	ldr	r6, [r0, #0x1b4]
-+	bic	r6, r6, #1
-+	str	r6, [r0, #0x1b4]
-+
-+	@ Deassert reset on target CPU
-+	mov	r6, #3
-+	str	r6, [r5]
-+
-+	@ Unlock CPU
-+	ldr	r6, [r0, #0x1e4]
-+	orr	r6, r6, r4
-+	str	r6, [r0, #0x1e4]
-+
-+	mov	r0, #ARM_PSCI_RET_SUCCESS	@ Return PSCI_RET_SUCCESS
-+	mov	pc, lr
-+
-+_target_pc:
-+	.word	0
-+
-+_sunxi_cpu_entry:
-+	@ Set SMP bit
-+	mrc	p15, 0, r0, c1, c0, 1
-+	orr	r0, r0, #0x40
-+	mcr	p15, 0, r0, c1, c0, 1
-+	isb
-+
-+	bl	_nonsec_init
-+	bl	psci_arch_init
-+
-+	adr	r0, _target_pc
-+	ldr	r0, [r0]
-+	b	_do_nonsec_entry
-+
-+text_end:
-+	.popsection
-diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
-index 11cc9ea..bae7b37 100644
---- a/include/configs/sun7i.h
-+++ b/include/configs/sun7i.h
-@@ -22,6 +22,12 @@
- #define CONFIG_BOARD_POSTCLK_INIT 1
- #endif
- 
-+#define CONFIG_ARMV7_VIRT		1
-+#define CONFIG_ARMV7_NONSEC		1
-+#define CONFIG_ARMV7_PSCI		1
-+#define CONFIG_ARMV7_PSCI_NR_CPUS	2
-+#define CONFIG_ARMV7_SECURE_BASE	SUNXI_SRAM_B_BASE
-+
- /*
-  * Include common sunxi configuration where most the settings are
-  */
-From a74a847c3727209a45c30a80c01b930938941dd4 Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Sat, 7 Dec 2013 11:19:18 +0000
-Subject: [PATCH] sunxi: HYP/non-sec: configure CNTFRQ on all CPUs
-
-CNTFRQ needs to be properly configured on all CPUs. Otherwise,
-virtual machines hoping to find valuable information on secondary
-CPUs will be disapointed...
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
----
- include/configs/sun7i.h | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
-index bae7b37..58a254b 100644
---- a/include/configs/sun7i.h
-+++ b/include/configs/sun7i.h
-@@ -27,6 +27,7 @@
- #define CONFIG_ARMV7_PSCI		1
- #define CONFIG_ARMV7_PSCI_NR_CPUS	2
- #define CONFIG_ARMV7_SECURE_BASE	SUNXI_SRAM_B_BASE
-+#define CONFIG_SYS_CLK_FREQ		24000000
- 
- /*
-  * Include common sunxi configuration where most the settings are
diff --git a/package/boot/uboot-sunxi/patches/003-add-lemaker-bananapro.diff b/package/boot/uboot-sunxi/patches/003-add-lemaker-bananapro.diff
new file mode 100644
index 0000000..1d2677c
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/003-add-lemaker-bananapro.diff
@@ -0,0 +1,22 @@
+diff -ruN u-boot-2015.01-rc3.old/board/sunxi/Makefile u-boot-2015.01-rc3/board/sunxi/Makefile
+--- u-boot-2015.01-rc3.old/board/sunxi/Makefile	2015-01-04 13:01:29.000000000 +0100
++++ u-boot-2015.01-rc3/board/sunxi/Makefile	2015-01-04 18:06:50.304380318 +0100
+@@ -22,6 +22,7 @@
+ obj-$(CONFIG_TARGET_AUXTEK_T004)	+= dram_a10s_olinuxino_m.o
+ obj-$(CONFIG_TARGET_BA10_TV_BOX)	+= dram_sun4i_384_1024_iow8.o
+ obj-$(CONFIG_TARGET_BANANAPI)		+= dram_bananapi.o
++obj-$(CONFIG_TARGET_BANANAPI)		+= dram_bananapi.o
+ obj-$(CONFIG_TARGET_CUBIEBOARD)		+= dram_cubieboard.o
+ obj-$(CONFIG_TARGET_CUBIEBOARD2)	+= dram_cubieboard2.o
+ obj-$(CONFIG_TARGET_CUBIETRUCK)		+= dram_cubietruck.o
+diff -ruN u-boot-2015.01-rc3.old/configs/Bananapro_defconfig u-boot-2015.01-rc3/configs/Bananapro_defconfig
+--- u-boot-2015.01-rc3.old/configs/Bananapro_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2015.01-rc3/configs/Bananapro_defconfig	2015-01-04 18:06:19.784880656 +0100
+@@ -0,0 +1,7 @@
++CONFIG_SPL=y
++CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
++CONFIG_FDTFILE="sun7i-a20-bananapro.dtb"
+++S:CONFIG_ARM=y
+++S:CONFIG_ARCH_SUNXI=y
+++S:CONFIG_MACH_SUN7I=y
+++S:CONFIG_TARGET_BANANAPRO=y
diff --git a/package/boot/uboot-sunxi/patches/003-uboot-fix-gmac-not-working-reliable-on-bananapi.patch b/package/boot/uboot-sunxi/patches/003-uboot-fix-gmac-not-working-reliable-on-bananapi.patch
deleted file mode 100644
index 6bc8c93..0000000
--- a/package/boot/uboot-sunxi/patches/003-uboot-fix-gmac-not-working-reliable-on-bananapi.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
-index e7ff952..f58c963 100644
---- a/board/sunxi/gmac.c
-+++ b/board/sunxi/gmac.c
-@@ -24,6 +24,15 @@ int sunxi_gmac_initialize(bd_t *bis)
- 		CCM_GMAC_CTRL_GPIT_MII);
- #endif
- 
-+	/*
-+	 * HdG: this is necessary to get GMAC to work reliable on the
-+	 * Bananapi. We don't know what these undocumented bits do, so this
-+	 * is a Bananapi specific hack for now.
-+	 */
-+#ifdef CONFIG_BANANAPI
-+	setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10);
-+#endif
-+
- 	/* Configure pin mux settings for GMAC */
- 	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) {
- #ifdef CONFIG_RGMII