mac80211: backport "brcmfmac: cleanup and some rework" from 4.17

It was described by Arend as:

> This series is intended for 4.17 and includes following:
>
>  * rework bus layer attach code.
>  * remove duplicate variable declaration.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 0da9303e5b444e2c98c24719c48c09f4c976c5a7)

9 files changed, 772 insertions, 1 deletions

diff --git a/package/kernel/mac80211/patches/325-v4.17-0001-brcmfmac-move-brcmf_bus_preinit-call-just-after-chan.patch b/package/kernel/mac80211/patches/325-v4.17-0001-brcmfmac-move-brcmf_bus_preinit-call-just-after-chan.patch
new file mode 100644
index 0000000..f4d9a84
--- /dev/null
+++ b/package/kernel/mac80211/patches/325-v4.17-0001-brcmfmac-move-brcmf_bus_preinit-call-just-after-chan.patch
@@ -0,0 +1,45 @@
+From da472385a29f1fddcac7cfa0499482704310bd16 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 20 Feb 2018 00:14:18 +0100
+Subject: [PATCH] brcmfmac: move brcmf_bus_preinit() call just after changing
+ bus state
+
+Moving the brcmf_bus_preinit() call allows the bus code to do some
+required initialization before handling firmware control messages.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 3 ---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c   | 5 +++++
+ 2 files changed, 5 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -369,9 +369,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
+ 
+ 	/* Enable tx beamforming, errors can be ignored (not supported) */
+ 	(void)brcmf_fil_iovar_int_set(ifp, "txbf", 1);
+-
+-	/* do bus specific preinit here */
+-	err = brcmf_bus_preinit(ifp->drvr->bus_if);
+ done:
+ 	return err;
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -1091,6 +1091,11 @@ int brcmf_bus_started(struct device *dev
+ 	/* signal bus ready */
+ 	brcmf_bus_change_state(bus_if, BRCMF_BUS_UP);
+ 
++	/* do bus specific preinit here */
++	ret = brcmf_bus_preinit(ifp->drvr->bus_if);
++	if (ret < 0)
++		goto fail;
++
+ 	/* Bus is ready, do any initialization */
+ 	ret = brcmf_c_preinit_dcmds(ifp);
+ 	if (ret < 0)
diff --git a/package/kernel/mac80211/patches/325-v4.17-0002-brcmfmac-move-allocation-of-control-rx-buffer-to-brc.patch b/package/kernel/mac80211/patches/325-v4.17-0002-brcmfmac-move-allocation-of-control-rx-buffer-to-brc.patch
new file mode 100644
index 0000000..230e891
--- /dev/null
+++ b/package/kernel/mac80211/patches/325-v4.17-0002-brcmfmac-move-allocation-of-control-rx-buffer-to-brc.patch
@@ -0,0 +1,69 @@
+From 4b5adc736828dc25ca33e263ad8c0b9dcd3bf325 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 20 Feb 2018 00:14:19 +0100
+Subject: [PATCH] brcmfmac: move allocation of control rx buffer to
+ brcmf_sdio_bus_preinit()
+
+Allocate the control rx buffer needed for firmware control interface
+during brcmf_sdio_bus_preinit(). This relies on common layer setting
+struct brcmf_bus::maxctl during brcmf_attach(). By moving the allocation
+we can move brcmf_attach() in subsequent change.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 26 ++++++++++------------
+ 1 file changed, 12 insertions(+), 14 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -1707,7 +1707,6 @@ brcmf_sdio_read_control(struct brcmf_sdi
+ 	int sdret;
+ 
+ 	brcmf_dbg(TRACE, "Enter\n");
+-
+ 	if (bus->rxblen)
+ 		buf = vzalloc(bus->rxblen);
+ 	if (!buf)
+@@ -3411,6 +3410,18 @@ static int brcmf_sdio_bus_preinit(struct
+ 	u32 value;
+ 	int err;
+ 
++	/* maxctl provided by common layer */
++	if (WARN_ON(!bus_if->maxctl))
++		return -EINVAL;
++
++	/* Allocate control receive buffer */
++	bus_if->maxctl += bus->roundup;
++	value = roundup((bus_if->maxctl + SDPCM_HDRLEN), ALIGNMENT);
++	value += bus->head_align;
++	bus->rxbuf = kmalloc(value, GFP_ATOMIC);
++	if (bus->rxbuf)
++		bus->rxblen = value;
++
+ 	/* the commands below use the terms tx and rx from
+ 	 * a device perspective, ie. bus:txglom affects the
+ 	 * bus transfers from device to host.
+@@ -4209,19 +4220,6 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
+ 	bus->blocksize = bus->sdiodev->func2->cur_blksize;
+ 	bus->roundup = min(max_roundup, bus->blocksize);
+ 
+-	/* Allocate buffers */
+-	if (bus->sdiodev->bus_if->maxctl) {
+-		bus->sdiodev->bus_if->maxctl += bus->roundup;
+-		bus->rxblen =
+-		    roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN),
+-			    ALIGNMENT) + bus->head_align;
+-		bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC);
+-		if (!(bus->rxbuf)) {
+-			brcmf_err("rxbuf allocation failed\n");
+-			goto fail;
+-		}
+-	}
+-
+ 	sdio_claim_host(bus->sdiodev->func1);
+ 
+ 	/* Disable F2 to clear any intermediate frame state on the dongle */
diff --git a/package/kernel/mac80211/patches/325-v4.17-0003-brcmfmac-call-brcmf_attach-just-before-calling-brcmf.patch b/package/kernel/mac80211/patches/325-v4.17-0003-brcmfmac-call-brcmf_attach-just-before-calling-brcmf.patch
new file mode 100644
index 0000000..a8b0171
--- /dev/null
+++ b/package/kernel/mac80211/patches/325-v4.17-0003-brcmfmac-call-brcmf_attach-just-before-calling-brcmf.patch
@@ -0,0 +1,106 @@
+From 262f2b53f67936b59cc8dfc6f3899ab8905bf1ed Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 20 Feb 2018 00:14:20 +0100
+Subject: [PATCH] brcmfmac: call brcmf_attach() just before calling
+ brcmf_bus_started()
+
+Now we can move brcmf_attach() until after the firmware has been downloaded
+to the device. Make the call just before brcmf_bus_started().
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/core.c    |  6 ++++
+ .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 34 +++++++++++-----------
+ 2 files changed, 23 insertions(+), 17 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -1268,6 +1268,12 @@ void brcmf_bus_change_state(struct brcmf
+ 	int ifidx;
+ 
+ 	brcmf_dbg(TRACE, "%d -> %d\n", bus->state, state);
++
++	if (!drvr) {
++		brcmf_dbg(INFO, "ignoring transition, bus not attached yet\n");
++		return;
++	}
++
+ 	bus->state = state;
+ 
+ 	if (state == BRCMF_BUS_UP) {
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -4048,9 +4048,6 @@ static void brcmf_sdio_firmware_callback
+ 	if (err)
+ 		goto fail;
+ 
+-	if (!bus_if->drvr)
+-		return;
+-
+ 	/* try to download image and nvram to the dongle */
+ 	bus->alp_only = true;
+ 	err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
+@@ -4126,11 +4123,28 @@ static void brcmf_sdio_firmware_callback
+ 
+ 	sdio_release_host(sdiodev->func1);
+ 
++	/* Assign bus interface call back */
++	sdiodev->bus_if->dev = sdiodev->dev;
++	sdiodev->bus_if->ops = &brcmf_sdio_bus_ops;
++	sdiodev->bus_if->chip = bus->ci->chip;
++	sdiodev->bus_if->chiprev = bus->ci->chiprev;
++
++	/* Attach to the common layer, reserve hdr space */
++	err = brcmf_attach(sdiodev->dev, sdiodev->settings);
++	if (err != 0) {
++		brcmf_err("brcmf_attach failed\n");
++		goto fail;
++	}
++
++	brcmf_sdio_debugfs_create(bus);
++
+ 	err = brcmf_bus_started(dev);
+ 	if (err != 0) {
+ 		brcmf_err("dongle is not responding\n");
+ 		goto fail;
+ 	}
++
++	/* ready */
+ 	return;
+ 
+ release:
+@@ -4200,22 +4214,9 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
+ 	bus->dpc_triggered = false;
+ 	bus->dpc_running = false;
+ 
+-	/* Assign bus interface call back */
+-	bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
+-	bus->sdiodev->bus_if->ops = &brcmf_sdio_bus_ops;
+-	bus->sdiodev->bus_if->chip = bus->ci->chip;
+-	bus->sdiodev->bus_if->chiprev = bus->ci->chiprev;
+-
+ 	/* default sdio bus header length for tx packet */
+ 	bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
+ 
+-	/* Attach to the common layer, reserve hdr space */
+-	ret = brcmf_attach(bus->sdiodev->dev, bus->sdiodev->settings);
+-	if (ret != 0) {
+-		brcmf_err("brcmf_attach failed\n");
+-		goto fail;
+-	}
+-
+ 	/* Query the F2 block size, set roundup accordingly */
+ 	bus->blocksize = bus->sdiodev->func2->cur_blksize;
+ 	bus->roundup = min(max_roundup, bus->blocksize);
+@@ -4240,7 +4241,6 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
+ 	/* SR state */
+ 	bus->sr_enabled = false;
+ 
+-	brcmf_sdio_debugfs_create(bus);
+ 	brcmf_dbg(INFO, "completed!!\n");
+ 
+ 	ret = brcmf_fw_map_chip_to_name(bus->ci->chip, bus->ci->chiprev,
diff --git a/package/kernel/mac80211/patches/325-v4.17-0004-brcmfmac-usb-call-brcmf_usb_up-during-brcmf_bus_prei.patch b/package/kernel/mac80211/patches/325-v4.17-0004-brcmfmac-usb-call-brcmf_usb_up-during-brcmf_bus_prei.patch
new file mode 100644
index 0000000..00c4141
--- /dev/null
+++ b/package/kernel/mac80211/patches/325-v4.17-0004-brcmfmac-usb-call-brcmf_usb_up-during-brcmf_bus_prei.patch
@@ -0,0 +1,41 @@
+From a7f4a80c0070b673d4a4ce94b99979ea6d0c6296 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 20 Feb 2018 00:14:21 +0100
+Subject: [PATCH] brcmfmac: usb: call brcmf_usb_up() during brcmf_bus_preinit()
+
+By calling brcmf_usb_up() during brcmf_bus_preinit() it does not need
+to be called in brcmf_usb_bus_setup().
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+@@ -1146,8 +1146,9 @@ static int brcmf_usb_get_fwname(struct d
+ }
+ 
+ static const struct brcmf_bus_ops brcmf_usb_bus_ops = {
+-	.txdata = brcmf_usb_tx,
++	.preinit = brcmf_usb_up,
+ 	.stop = brcmf_usb_down,
++	.txdata = brcmf_usb_tx,
+ 	.txctl = brcmf_usb_tx_ctlpkt,
+ 	.rxctl = brcmf_usb_rx_ctlpkt,
+ 	.wowl_config = brcmf_usb_wowl_config,
+@@ -1165,10 +1166,6 @@ static int brcmf_usb_bus_setup(struct br
+ 		return ret;
+ 	}
+ 
+-	ret = brcmf_usb_up(devinfo->dev);
+-	if (ret)
+-		goto fail;
+-
+ 	ret = brcmf_bus_started(devinfo->dev);
+ 	if (ret)
+ 		goto fail;
diff --git a/package/kernel/mac80211/patches/325-v4.17-0005-brcmfmac-move-brcmf_attach-function-in-core.c.patch b/package/kernel/mac80211/patches/325-v4.17-0005-brcmfmac-move-brcmf_attach-function-in-core.c.patch
new file mode 100644
index 0000000..086b5fa
--- /dev/null
+++ b/package/kernel/mac80211/patches/325-v4.17-0005-brcmfmac-move-brcmf_attach-function-in-core.c.patch
@@ -0,0 +1,130 @@
+From 0542503c4c164c65cd1567b0f2b3f887af6c81eb Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 20 Feb 2018 00:14:22 +0100
+Subject: [PATCH] brcmfmac: move brcmf_attach() function in core.c
+
+Moving the function in preparation of subsequent patch.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/core.c    | 98 +++++++++++-----------
+ 1 file changed, 49 insertions(+), 49 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -992,55 +992,6 @@ static int brcmf_inet6addr_changed(struc
+ }
+ #endif
+ 
+-int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings)
+-{
+-	struct brcmf_pub *drvr = NULL;
+-	int ret = 0;
+-	int i;
+-
+-	brcmf_dbg(TRACE, "Enter\n");
+-
+-	/* Allocate primary brcmf_info */
+-	drvr = kzalloc(sizeof(struct brcmf_pub), GFP_ATOMIC);
+-	if (!drvr)
+-		return -ENOMEM;
+-
+-	for (i = 0; i < ARRAY_SIZE(drvr->if2bss); i++)
+-		drvr->if2bss[i] = BRCMF_BSSIDX_INVALID;
+-
+-	mutex_init(&drvr->proto_block);
+-
+-	/* Link to bus module */
+-	drvr->hdrlen = 0;
+-	drvr->bus_if = dev_get_drvdata(dev);
+-	drvr->bus_if->drvr = drvr;
+-	drvr->settings = settings;
+-
+-	/* attach debug facilities */
+-	brcmf_debug_attach(drvr);
+-
+-	/* Attach and link in the protocol */
+-	ret = brcmf_proto_attach(drvr);
+-	if (ret != 0) {
+-		brcmf_err("brcmf_prot_attach failed\n");
+-		goto fail;
+-	}
+-
+-	/* Attach to events important for core code */
+-	brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG,
+-			    brcmf_psm_watchdog_notify);
+-
+-	/* attach firmware event handler */
+-	brcmf_fweh_attach(drvr);
+-
+-	return ret;
+-
+-fail:
+-	brcmf_detach(dev);
+-
+-	return ret;
+-}
+-
+ static int brcmf_revinfo_read(struct seq_file *s, void *data)
+ {
+ 	struct brcmf_bus *bus_if = dev_get_drvdata(s->private);
+@@ -1170,6 +1121,55 @@ fail:
+ 
+ 	return ret;
+ }
++
++int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings)
++{
++	struct brcmf_pub *drvr = NULL;
++	int ret = 0;
++	int i;
++
++	brcmf_dbg(TRACE, "Enter\n");
++
++	/* Allocate primary brcmf_info */
++	drvr = kzalloc(sizeof(*drvr), GFP_ATOMIC);
++	if (!drvr)
++		return -ENOMEM;
++
++	for (i = 0; i < ARRAY_SIZE(drvr->if2bss); i++)
++		drvr->if2bss[i] = BRCMF_BSSIDX_INVALID;
++
++	mutex_init(&drvr->proto_block);
++
++	/* Link to bus module */
++	drvr->hdrlen = 0;
++	drvr->bus_if = dev_get_drvdata(dev);
++	drvr->bus_if->drvr = drvr;
++	drvr->settings = settings;
++
++	/* attach debug facilities */
++	brcmf_debug_attach(drvr);
++
++	/* Attach and link in the protocol */
++	ret = brcmf_proto_attach(drvr);
++	if (ret != 0) {
++		brcmf_err("brcmf_prot_attach failed\n");
++		goto fail;
++	}
++
++	/* Attach to events important for core code */
++	brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG,
++			    brcmf_psm_watchdog_notify);
++
++	/* attach firmware event handler */
++	brcmf_fweh_attach(drvr);
++
++	return ret;
++
++fail:
++	brcmf_detach(dev);
++
++	return ret;
++}
+ 
+ void brcmf_bus_add_txhdrlen(struct device *dev, uint len)
+ {
diff --git a/package/kernel/mac80211/patches/325-v4.17-0006-brcmfmac-remove-brcmf_bus_started-from-bus-api.patch b/package/kernel/mac80211/patches/325-v4.17-0006-brcmfmac-remove-brcmf_bus_started-from-bus-api.patch
new file mode 100644
index 0000000..6d23ccd
--- /dev/null
+++ b/package/kernel/mac80211/patches/325-v4.17-0006-brcmfmac-remove-brcmf_bus_started-from-bus-api.patch
@@ -0,0 +1,190 @@
+From de2a3027f6f15e2f6558dc4d178282ccc1f054db Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 20 Feb 2018 00:14:23 +0100
+Subject: [PATCH] brcmfmac: remove brcmf_bus_started() from bus api
+
+No longer needed to call this in bus layer so make it static and call
+it in the last phase of brcmf_attach() instead.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../net/wireless/broadcom/brcm80211/brcmfmac/bus.h |  1 -
+ .../wireless/broadcom/brcm80211/brcmfmac/core.c    | 14 +++++++----
+ .../wireless/broadcom/brcm80211/brcmfmac/pcie.c    | 20 +---------------
+ .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 10 ++------
+ .../net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 28 ++++------------------
+ 5 files changed, 16 insertions(+), 57 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+@@ -253,7 +253,6 @@ void brcmf_dev_reset(struct device *dev)
+ /* Configure the "global" bus state used by upper layers */
+ void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state);
+ 
+-int brcmf_bus_started(struct device *dev);
+ s32 brcmf_iovar_data_set(struct device *dev, char *name, void *data, u32 len);
+ void brcmf_bus_add_txhdrlen(struct device *dev, uint len);
+ 
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -1022,11 +1022,10 @@ static int brcmf_revinfo_read(struct seq
+ 	return 0;
+ }
+ 
+-int brcmf_bus_started(struct device *dev)
++static int brcmf_bus_started(struct brcmf_pub *drvr)
+ {
+ 	int ret = -1;
+-	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+-	struct brcmf_pub *drvr = bus_if->drvr;
++	struct brcmf_bus *bus_if = drvr->bus_if;
+ 	struct brcmf_if *ifp;
+ 	struct brcmf_if *p2p_ifp;
+ 
+@@ -1043,7 +1042,7 @@ int brcmf_bus_started(struct device *dev
+ 	brcmf_bus_change_state(bus_if, BRCMF_BUS_UP);
+ 
+ 	/* do bus specific preinit here */
+-	ret = brcmf_bus_preinit(ifp->drvr->bus_if);
++	ret = brcmf_bus_preinit(bus_if);
+ 	if (ret < 0)
+ 		goto fail;
+ 
+@@ -1163,7 +1162,12 @@ int brcmf_attach(struct device *dev, str
+ 	/* attach firmware event handler */
+ 	brcmf_fweh_attach(drvr);
+ 
+-	return ret;
++	ret = brcmf_bus_started(drvr);
++	if (ret != 0) {
++		brcmf_err("dongle is not responding: err=%d\n", ret);
++		goto fail;
++	}
++	return 0;
+ 
+ fail:
+ 	brcmf_detach(dev);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+@@ -1581,24 +1581,6 @@ static void brcmf_pcie_release_resource(
+ }
+ 
+ 
+-static int brcmf_pcie_attach_bus(struct brcmf_pciedev_info *devinfo)
+-{
+-	int ret;
+-
+-	/* Attach to the common driver interface */
+-	ret = brcmf_attach(&devinfo->pdev->dev, devinfo->settings);
+-	if (ret) {
+-		brcmf_err("brcmf_attach failed\n");
+-	} else {
+-		ret = brcmf_bus_started(&devinfo->pdev->dev);
+-		if (ret)
+-			brcmf_err("dongle is not responding\n");
+-	}
+-
+-	return ret;
+-}
+-
+-
+ static u32 brcmf_pcie_buscore_prep_addr(const struct pci_dev *pdev, u32 addr)
+ {
+ 	u32 ret_addr;
+@@ -1735,7 +1717,7 @@ static void brcmf_pcie_setup(struct devi
+ 	init_waitqueue_head(&devinfo->mbdata_resp_wait);
+ 
+ 	brcmf_pcie_intr_enable(devinfo);
+-	if (brcmf_pcie_attach_bus(devinfo) == 0)
++	if (brcmf_attach(&devinfo->pdev->dev, devinfo->settings) == 0)
+ 		return;
+ 
+ 	brcmf_pcie_bus_console_read(devinfo);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -3422,6 +3422,8 @@ static int brcmf_sdio_bus_preinit(struct
+ 	if (bus->rxbuf)
+ 		bus->rxblen = value;
+ 
++	brcmf_sdio_debugfs_create(bus);
++
+ 	/* the commands below use the terms tx and rx from
+ 	 * a device perspective, ie. bus:txglom affects the
+ 	 * bus transfers from device to host.
+@@ -4136,14 +4138,6 @@ static void brcmf_sdio_firmware_callback
+ 		goto fail;
+ 	}
+ 
+-	brcmf_sdio_debugfs_create(bus);
+-
+-	err = brcmf_bus_started(dev);
+-	if (err != 0) {
+-		brcmf_err("dongle is not responding\n");
+-		goto fail;
+-	}
+-
+ 	/* ready */
+ 	return;
+ 
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+@@ -1155,27 +1155,6 @@ static const struct brcmf_bus_ops brcmf_
+ 	.get_fwname = brcmf_usb_get_fwname,
+ };
+ 
+-static int brcmf_usb_bus_setup(struct brcmf_usbdev_info *devinfo)
+-{
+-	int ret;
+-
+-	/* Attach to the common driver interface */
+-	ret = brcmf_attach(devinfo->dev, devinfo->settings);
+-	if (ret) {
+-		brcmf_err("brcmf_attach failed\n");
+-		return ret;
+-	}
+-
+-	ret = brcmf_bus_started(devinfo->dev);
+-	if (ret)
+-		goto fail;
+-
+-	return 0;
+-fail:
+-	brcmf_detach(devinfo->dev);
+-	return ret;
+-}
+-
+ static void brcmf_usb_probe_phase2(struct device *dev, int ret,
+ 				   const struct firmware *fw,
+ 				   void *nvram, u32 nvlen)
+@@ -1203,7 +1182,8 @@ static void brcmf_usb_probe_phase2(struc
+ 	if (ret)
+ 		goto error;
+ 
+-	ret = brcmf_usb_bus_setup(devinfo);
++	/* Attach to the common driver interface */
++	ret = brcmf_attach(devinfo->dev, devinfo->settings);
+ 	if (ret)
+ 		goto error;
+ 
+@@ -1253,7 +1233,7 @@ static int brcmf_usb_probe_cb(struct brc
+ 	}
+ 
+ 	if (!brcmf_usb_dlneeded(devinfo)) {
+-		ret = brcmf_usb_bus_setup(devinfo);
++		ret = brcmf_attach(devinfo->dev, devinfo->settings);
+ 		if (ret)
+ 			goto fail;
+ 		/* we are done */
+@@ -1456,7 +1436,7 @@ static int brcmf_usb_resume(struct usb_i
+ 
+ 	brcmf_dbg(USB, "Enter\n");
+ 	if (!devinfo->wowl_enabled)
+-		return brcmf_usb_bus_setup(devinfo);
++		return brcmf_attach(devinfo->dev, devinfo->settings);
+ 
+ 	devinfo->bus_pub.state = BRCMFMAC_USB_STATE_UP;
+ 	brcmf_usb_rx_fill_all(devinfo);
diff --git a/package/kernel/mac80211/patches/325-v4.17-0007-brcmfmac-change-log-level-for-some-low-level-sdio-fu.patch b/package/kernel/mac80211/patches/325-v4.17-0007-brcmfmac-change-log-level-for-some-low-level-sdio-fu.patch
new file mode 100644
index 0000000..3448269
--- /dev/null
+++ b/package/kernel/mac80211/patches/325-v4.17-0007-brcmfmac-change-log-level-for-some-low-level-sdio-fu.patch
@@ -0,0 +1,64 @@
+From d678296bfb9a630d0000222fc21f4ed0d0d65332 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 20 Feb 2018 00:14:24 +0100
+Subject: [PATCH] brcmfmac: change log level for some low-level sdio functions
+
+Reducing the number of trace level messages in sdio code giving
+them sdio log level instead.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -1706,7 +1706,7 @@ brcmf_sdio_read_control(struct brcmf_sdi
+ 	u8 *buf = NULL, *rbuf;
+ 	int sdret;
+ 
+-	brcmf_dbg(TRACE, "Enter\n");
++	brcmf_dbg(SDIO, "Enter\n");
+ 	if (bus->rxblen)
+ 		buf = vzalloc(bus->rxblen);
+ 	if (!buf)
+@@ -1809,7 +1809,7 @@ static uint brcmf_sdio_readframes(struct
+ 	struct brcmf_sdio_hdrinfo *rd = &bus->cur_read, rd_new;
+ 	u8 head_read = 0;
+ 
+-	brcmf_dbg(TRACE, "Enter\n");
++	brcmf_dbg(SDIO, "Enter\n");
+ 
+ 	/* Not finished unless we encounter no more frames indication */
+ 	bus->rxpending = true;
+@@ -2344,7 +2344,7 @@ static int brcmf_sdio_tx_ctrlframe(struc
+ 	struct brcmf_sdio_hdrinfo hd_info = {0};
+ 	int ret;
+ 
+-	brcmf_dbg(TRACE, "Enter\n");
++	brcmf_dbg(SDIO, "Enter\n");
+ 
+ 	/* Back the pointer to make room for bus header */
+ 	frame -= bus->tx_hdrlen;
+@@ -2520,7 +2520,7 @@ static void brcmf_sdio_dpc(struct brcmf_
+ 	uint framecnt;			/* Temporary counter of tx/rx frames */
+ 	int err = 0;
+ 
+-	brcmf_dbg(TRACE, "Enter\n");
++	brcmf_dbg(SDIO, "Enter\n");
+ 
+ 	sdio_claim_host(bus->sdiodev->func1);
+ 
+@@ -2605,7 +2605,7 @@ static void brcmf_sdio_dpc(struct brcmf_
+ 
+ 	/* Would be active due to wake-wlan in gSPI */
+ 	if (intstatus & I_CHIPACTIVE) {
+-		brcmf_dbg(INFO, "Dongle reports CHIPACTIVE\n");
++		brcmf_dbg(SDIO, "Dongle reports CHIPACTIVE\n");
+ 		intstatus &= ~I_CHIPACTIVE;
+ 	}
+ 
diff --git a/package/kernel/mac80211/patches/325-v4.17-0008-brcmfmac-remove-duplicate-pointer-variable-from-brcm.patch b/package/kernel/mac80211/patches/325-v4.17-0008-brcmfmac-remove-duplicate-pointer-variable-from-brcm.patch
new file mode 100644
index 0000000..39fba21
--- /dev/null
+++ b/package/kernel/mac80211/patches/325-v4.17-0008-brcmfmac-remove-duplicate-pointer-variable-from-brcm.patch
@@ -0,0 +1,126 @@
+From 2d6edad4b2da1991f74e7b02053eeb4a043b887f Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 20 Feb 2018 00:14:25 +0100
+Subject: [PATCH] brcmfmac: remove duplicate pointer variable from
+ brcmf_sdio_firmware_callback()
+
+In brcmf_sdio_firmware_callback() two pointer variables were used
+pointing to the same construct. Get rid of sdiodev variable.
+
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 37 +++++++++++-----------
+ 1 file changed, 18 insertions(+), 19 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -4039,9 +4039,8 @@ static void brcmf_sdio_firmware_callback
+ 					 void *nvram, u32 nvram_len)
+ {
+ 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+-	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+-	struct brcmf_sdio *bus = sdiodev->bus;
+-	struct brcmf_sdio_dev *sdiod = bus->sdiodev;
++	struct brcmf_sdio_dev *sdiod = bus_if->bus_priv.sdio;
++	struct brcmf_sdio *bus = sdiod->bus;
+ 	struct brcmf_core *core = bus->sdio_core;
+ 	u8 saveclk;
+ 
+@@ -4061,7 +4060,7 @@ static void brcmf_sdio_firmware_callback
+ 	bus->sdcnt.tickcnt = 0;
+ 	brcmf_sdio_wd_timer(bus, true);
+ 
+-	sdio_claim_host(sdiodev->func1);
++	sdio_claim_host(sdiod->func1);
+ 
+ 	/* Make sure backplane clock is on, needed to generate F2 interrupt */
+ 	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
+@@ -4069,9 +4068,9 @@ static void brcmf_sdio_firmware_callback
+ 		goto release;
+ 
+ 	/* Force clocks on backplane to be sure F2 interrupt propagates */
+-	saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
++	saveclk = brcmf_sdiod_readb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR, &err);
+ 	if (!err) {
+-		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
++		brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR,
+ 				   (saveclk | SBSDIO_FORCE_HT), &err);
+ 	}
+ 	if (err) {
+@@ -4083,7 +4082,7 @@ static void brcmf_sdio_firmware_callback
+ 	brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailboxdata),
+ 			   SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, NULL);
+ 
+-	err = sdio_enable_func(sdiodev->func2);
++	err = sdio_enable_func(sdiod->func2);
+ 
+ 	brcmf_dbg(INFO, "enable F2: err=%d\n", err);
+ 
+@@ -4095,10 +4094,10 @@ static void brcmf_sdio_firmware_callback
+ 				   bus->hostintmask, NULL);
+ 
+ 
+-		brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
++		brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 8, &err);
+ 	} else {
+ 		/* Disable F2 again */
+-		sdio_disable_func(sdiodev->func2);
++		sdio_disable_func(sdiod->func2);
+ 		goto release;
+ 	}
+ 
+@@ -4106,7 +4105,7 @@ static void brcmf_sdio_firmware_callback
+ 		brcmf_sdio_sr_init(bus);
+ 	} else {
+ 		/* Restore previous clock setting */
+-		brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
++		brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR,
+ 				   saveclk, &err);
+ 	}
+ 
+@@ -4114,7 +4113,7 @@ static void brcmf_sdio_firmware_callback
+ 		/* Allow full data communication using DPC from now on. */
+ 		brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA);
+ 
+-		err = brcmf_sdiod_intr_register(sdiodev);
++		err = brcmf_sdiod_intr_register(sdiod);
+ 		if (err != 0)
+ 			brcmf_err("intr register failed:%d\n", err);
+ 	}
+@@ -4123,16 +4122,16 @@ static void brcmf_sdio_firmware_callback
+ 	if (err != 0)
+ 		brcmf_sdio_clkctl(bus, CLK_NONE, false);
+ 
+-	sdio_release_host(sdiodev->func1);
++	sdio_release_host(sdiod->func1);
+ 
+ 	/* Assign bus interface call back */
+-	sdiodev->bus_if->dev = sdiodev->dev;
+-	sdiodev->bus_if->ops = &brcmf_sdio_bus_ops;
+-	sdiodev->bus_if->chip = bus->ci->chip;
+-	sdiodev->bus_if->chiprev = bus->ci->chiprev;
++	sdiod->bus_if->dev = sdiod->dev;
++	sdiod->bus_if->ops = &brcmf_sdio_bus_ops;
++	sdiod->bus_if->chip = bus->ci->chip;
++	sdiod->bus_if->chiprev = bus->ci->chiprev;
+ 
+ 	/* Attach to the common layer, reserve hdr space */
+-	err = brcmf_attach(sdiodev->dev, sdiodev->settings);
++	err = brcmf_attach(sdiod->dev, sdiod->settings);
+ 	if (err != 0) {
+ 		brcmf_err("brcmf_attach failed\n");
+ 		goto fail;
+@@ -4142,10 +4141,10 @@ static void brcmf_sdio_firmware_callback
+ 	return;
+ 
+ release:
+-	sdio_release_host(sdiodev->func1);
++	sdio_release_host(sdiod->func1);
+ fail:
+ 	brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err);
+-	device_release_driver(&sdiodev->func2->dev);
++	device_release_driver(&sdiod->func2->dev);
+ 	device_release_driver(dev);
+ }
+ 
diff --git a/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch b/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch
index b7bce63..a167046 100644
--- a/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch
+++ b/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch
@@ -13,7 +13,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1295,6 +1295,7 @@ int __init brcmf_core_init(void)
+@@ -1310,6 +1310,7 @@ int __init brcmf_core_init(void)
  {
  	if (!schedule_work(&brcmf_driver_work))
  		return -EBUSY;