hostapd: include the madwifi headers in the package directory to avoid compile breakage if the madwifi build fails

SVN-Revision: 35893

6 files changed, 2454 insertions, 1 deletions

diff --git a/package/network/services/hostapd/Makefile b/package/network/services/hostapd/Makefile
index 80f9a0d..80845bf 100644
--- a/package/network/services/hostapd/Makefile
+++ b/package/network/services/hostapd/Makefile
@@ -218,7 +218,7 @@ TARGET_CPPFLAGS := \
 	-I$(STAGING_DIR)/usr/include/libnl-tiny \
 	-I$(PKG_BUILD_DIR)/src/crypto \
 	$(TARGET_CPPFLAGS) \
-	-I$(STAGING_DIR)/usr/include/madwifi \
+	-I$(CURDIR)/madwifi \
 	-DCONFIG_LIBNL20 \
 	-D_GNU_SOURCE \
 	$(if $(CONFIG_WPA_MSG_MIN_PRIORITY),-DCONFIG_MSG_MIN_PRIORITY=$(CONFIG_WPA_MSG_MIN_PRIORITY))
diff --git a/package/network/services/hostapd/madwifi/include/compat.h b/package/network/services/hostapd/madwifi/include/compat.h
new file mode 100644
index 0000000..09e6397
--- /dev/null
+++ b/package/network/services/hostapd/madwifi/include/compat.h
@@ -0,0 +1,209 @@
+/*-
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ *    redistribution must be conditioned upon including a substantially
+ *    similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ * $Id: compat.h 3310 2008-01-30 20:23:49Z mentor $
+ */
+#ifndef _ATH_COMPAT_H_
+#define _ATH_COMPAT_H_
+
+/* Compatibility with older Linux kernels */
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/netdevice.h>
+#endif
+
+#if !defined(__KERNEL__) || !defined (__bitwise)
+#define __le16 u_int16_t
+#define __le32 u_int32_t
+#define __le64 u_int64_t
+#define __be16 u_int16_t
+#define __be32 u_int32_t
+#define __be64 u_int64_t
+#define __force
+#endif
+
+#ifndef container_of
+#define container_of(ptr, type, member) ({				\
+	    const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
+	    (type *)( (char *)__mptr - offsetof(type,member) );})
+#endif
+
+#ifndef list_for_each_entry_reverse
+#define list_for_each_entry_reverse(pos, head, member)			\
+	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
+	     prefetch(pos->member.prev), &pos->member != (head); 	\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member))
+#endif
+
+#ifndef NETDEV_TX_OK
+#define NETDEV_TX_OK    0
+#define NETDEV_TX_BUSY  1
+#endif
+
+/*
+ * BSD/Linux compatibility shims.  These are used mainly to
+ * minimize differences when importing necesary BSD code.
+ */
+#define	NBBY	8			/* number of bits/byte */
+
+/* roundup() appears in Linux 2.6.18 */
+#include <linux/kernel.h>
+#ifndef roundup
+#define	roundup(x, y)	((((x)+((y)-1))/(y))*(y))  /* to any y */
+#endif
+
+#define	howmany(x, y)	(((x)+((y)-1))/(y))
+
+/* Bit map related macros. */
+#define	setbit(a,i)	((a)[(i)/NBBY] |= 1<<((i)%NBBY))
+#define	clrbit(a,i)	((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
+#define	isset(a,i)	((a)[(i)/NBBY] & (1<<((i)%NBBY)))
+#define	isclr(a,i)	(((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
+
+#ifndef __packed
+#define	__packed	__attribute__((__packed__))
+#endif
+
+#define	__offsetof(t,m)	offsetof(t,m)
+
+#ifndef ALIGNED_POINTER
+/*
+ * ALIGNED_POINTER is a boolean macro that checks whether an address
+ * is valid to fetch data elements of type t from on this architecture.
+ * This does not reflect the optimal alignment, just the possibility
+ * (within reasonable limits). 
+ *
+ */
+#define ALIGNED_POINTER(p,t)	1
+#endif
+
+#ifdef __KERNEL__
+#define	KASSERT(exp, msg) do {			\
+	if (unlikely(!(exp))) {			\
+		printk msg;			\
+		BUG();				\
+	}					\
+} while (0)
+#endif /* __KERNEL__ */
+
+/*
+ * NetBSD/FreeBSD defines for file version.
+ */
+#define	__FBSDID(_s)
+#define	__KERNEL_RCSID(_n,_s)
+
+/*
+ * Fixes for Linux API changes
+ */
+#ifdef __KERNEL__
+
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+#define AUTOCONF_INCLUDED 1
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)
+#define ATH_REGISTER_SYSCTL_TABLE(t) register_sysctl_table(t, 1)
+#else
+#define ATH_REGISTER_SYSCTL_TABLE(t) register_sysctl_table(t)
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9)
+#define __user
+#define __kernel
+#define __iomem
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
+typedef int gfp_t;
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16)
+static inline int timeval_compare(struct timeval *lhs, struct timeval *rhs)
+{
+	if (lhs->tv_sec < rhs->tv_sec)
+		return -1;
+	if (lhs->tv_sec > rhs->tv_sec)
+		return 1;
+	return lhs->tv_usec - rhs->tv_usec;
+}
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
+#define IRQF_SHARED SA_SHIRQ
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27)
+#define netdev_priv(_netdev) ((_netdev)->priv)
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22)
+#define skb_end_pointer(_skb) ((_skb)->end)
+#define skb_tail_pointer(_skb) ((_skb)->tail)
+#define skb_set_network_header(_skb, _offset) \
+	do { (_skb)->nh.raw = (_skb)->data + (_offset); } while(0)
+#define skb_reset_network_header(_skb) \
+	do { (_skb)->nh.raw = (_skb)->data; } while(0)
+#define skb_mac_header(_skb) ((_skb)->mac.raw)
+#define skb_reset_mac_header(_skb) \
+	do { (_skb)->mac.raw = (_skb)->data; } while(0)
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
+#define CTL_AUTO -2
+#define DEV_ATH 9
+#else
+#define CTL_AUTO CTL_UNNUMBERED
+#define DEV_ATH CTL_UNNUMBERED
+#endif
+
+/* __skb_append got a third parameter in 2.6.14 */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
+#define __skb_queue_after(_list, _old, _new)	__skb_append(_old, _new)
+#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+#define __skb_queue_after(_list, _old, _new)	__skb_append(_old, _new, _list)
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33)
+#define CTLNAME(x)	.ctl_name	= x,
+#else
+#define CTLNAME(x)
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ATH_COMPAT_H_ */
diff --git a/package/network/services/hostapd/madwifi/net80211/_ieee80211.h b/package/network/services/hostapd/madwifi/net80211/_ieee80211.h
new file mode 100644
index 0000000..2d2a06f
--- /dev/null
+++ b/package/network/services/hostapd/madwifi/net80211/_ieee80211.h
@@ -0,0 +1,325 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $Id: _ieee80211.h 3207 2008-01-18 21:25:05Z mtaylor $
+ */
+#ifndef _NET80211__IEEE80211_H_
+#define _NET80211__IEEE80211_H_
+
+enum ieee80211_phytype {
+	IEEE80211_T_DS,			/* direct sequence spread spectrum */
+	IEEE80211_T_FH,			/* frequency hopping */
+	IEEE80211_T_OFDM,		/* frequency division multiplexing */
+	IEEE80211_T_TURBO,		/* high rate OFDM, aka turbo mode */
+};
+#define	IEEE80211_T_CCK	IEEE80211_T_DS	/* more common nomenclature */
+
+/* XXX: not really a mode; there are really multiple PHYs */
+enum ieee80211_phymode {
+	IEEE80211_MODE_AUTO	= 0,	/* autoselect */
+	IEEE80211_MODE_11A	= 1,	/* 5GHz, OFDM */
+	IEEE80211_MODE_11B	= 2,	/* 2GHz, CCK */
+	IEEE80211_MODE_11G	= 3,	/* 2GHz, OFDM */
+	IEEE80211_MODE_FH	= 4,	/* 2GHz, GFSK */
+	IEEE80211_MODE_TURBO_A	= 5,	/* 5GHz, OFDM, 2x clock dynamic turbo */
+	IEEE80211_MODE_TURBO_G	= 6,	/* 2GHz, OFDM, 2x clock  dynamic turbo*/
+};
+#define	IEEE80211_MODE_MAX	(IEEE80211_MODE_TURBO_G+1)
+
+enum ieee80211_opmode {
+	IEEE80211_M_STA		= 1,	/* infrastructure station */
+	IEEE80211_M_IBSS 	= 0,	/* IBSS (adhoc) station */
+	IEEE80211_M_AHDEMO	= 3,	/* Old lucent compatible adhoc demo */
+	IEEE80211_M_HOSTAP	= 6,	/* Software Access Point */
+	IEEE80211_M_MONITOR	= 8,	/* Monitor mode */
+	IEEE80211_M_WDS		= 2	/* WDS link */
+};
+
+/*
+ * True if this mode will send beacon on a regular interval, like AP
+ * or IBSS
+ */
+#define IEEE80211_IS_MODE_BEACON(_opmode) \
+	((_opmode == IEEE80211_M_IBSS) || \
+	 (_opmode == IEEE80211_M_HOSTAP))
+
+/*
+ * True if this mode must behave like a DFS master, ie do Channel
+ * Check Availability and In Service Monitoring. We need to make sure
+ * that all modes cannot send data without being authorized. Such
+ * enforcement is not done in monitor mode however.
+ */
+
+#define IEEE80211_IS_MODE_DFS_MASTER(_opmode) \
+	((_opmode == IEEE80211_M_IBSS) || \
+	 (_opmode == IEEE80211_M_AHDEMO) || \
+	 (_opmode == IEEE80211_M_HOSTAP) || \
+	 (_opmode == IEEE80211_M_WDS))
+
+/*
+ * 802.11g protection mode.
+ */
+enum ieee80211_protmode {
+	IEEE80211_PROT_NONE	= 0,	/* no protection */
+	IEEE80211_PROT_CTSONLY	= 1,	/* CTS to self */
+	IEEE80211_PROT_RTSCTS	= 2,	/* RTS-CTS */
+};
+
+/*
+ * Authentication mode.
+ */
+enum ieee80211_authmode {
+	IEEE80211_AUTH_NONE	= 0,
+	IEEE80211_AUTH_OPEN	= 1,	/* open */
+	IEEE80211_AUTH_SHARED	= 2,	/* shared-key */
+	IEEE80211_AUTH_8021X	= 3,	/* 802.1x */
+	IEEE80211_AUTH_AUTO	= 4,	/* auto-select/accept */
+	/* NB: these are used only for ioctls */
+	IEEE80211_AUTH_WPA	= 5,	/* WPA/RSN w/ 802.1x/PSK */
+};
+
+/*
+ * Roaming mode is effectively who controls the operation
+ * of the 802.11 state machine when operating as a station.
+ * State transitions are controlled either by the driver
+ * (typically when management frames are processed by the
+ * hardware/firmware), the host (auto/normal operation of
+ * the 802.11 layer), or explicitly through ioctl requests
+ * when applications like wpa_supplicant want control.
+ */
+enum ieee80211_roamingmode {
+	IEEE80211_ROAMING_DEVICE= 0,	/* driver/hardware control */
+	IEEE80211_ROAMING_AUTO	= 1,	/* 802.11 layer control */
+	IEEE80211_ROAMING_MANUAL= 2,	/* application control */
+};
+
+/*
+ * Scanning mode controls station scanning work; this is
+ * used only when roaming mode permits the host to select
+ * the bss to join/channel to use.
+ */
+enum ieee80211_scanmode {
+	IEEE80211_SCAN_DEVICE	= 0,	/* driver/hardware control */
+	IEEE80211_SCAN_BEST	= 1,	/* 802.11 layer selects best */
+	IEEE80211_SCAN_FIRST	= 2,	/* take first suitable candidate */
+};
+
+enum ieee80211_scanflags {
+	IEEE80211_NOSCAN_DEFAULT = (1 << 0),
+	IEEE80211_NOSCAN_SET     = (1 << 1),
+};
+
+/*
+ * Channels are specified by frequency and attributes.
+ */
+struct ieee80211_channel {
+	u_int16_t ic_freq;	/* setting in MHz */
+	u_int16_t ic_flags;	/* see below */
+	u_int8_t ic_ieee;	/* IEEE channel number */
+	int8_t ic_maxregpower;	/* maximum regulatory tx power in dBm */
+	int8_t ic_maxpower;	/* maximum tx power in dBm */
+	int8_t ic_minpower;	/* minimum tx power in dBm */
+	u_int8_t ic_scanflags;
+	u_int8_t ic_idletime; /* phy idle time in % */
+};
+
+#define	IEEE80211_CHAN_MAX	255
+#define	IEEE80211_CHAN_BYTES	32	/* howmany(IEEE80211_CHAN_MAX, NBBY) */
+#define	IEEE80211_CHAN_ANY	0xffff	/* token for ``any channel'' */
+#define	IEEE80211_CHAN_ANYC 	((struct ieee80211_channel *) IEEE80211_CHAN_ANY)
+
+#define	IEEE80211_RADAR_CHANCHANGE_TBTT_COUNT	0
+#define IEEE80211_DEFAULT_CHANCHANGE_TBTT_COUNT	3
+
+#define	IEEE80211_RADAR_TEST_MUTE_CHAN	36	/* Move to channel 36 for mute test */
+
+/* bits 0-3 are for private use by drivers */
+/* channel attributes */
+#define	IEEE80211_CHAN_TURBO	0x0010	/* Turbo channel */
+#define	IEEE80211_CHAN_CCK	0x0020	/* CCK channel */
+#define	IEEE80211_CHAN_OFDM	0x0040	/* OFDM channel */
+#define	IEEE80211_CHAN_2GHZ	0x0080	/* 2 GHz spectrum channel. */
+#define	IEEE80211_CHAN_5GHZ	0x0100	/* 5 GHz spectrum channel */
+#define	IEEE80211_CHAN_PASSIVE	0x0200	/* Only passive scan allowed */
+#define	IEEE80211_CHAN_DYN	0x0400	/* Dynamic CCK-OFDM channel */
+#define	IEEE80211_CHAN_GFSK	0x0800	/* GFSK channel (FHSS PHY) */
+#define IEEE80211_CHAN_RADAR	0x1000	/* Radar found on channel */
+#define	IEEE80211_CHAN_STURBO	0x2000	/* 11a static turbo channel only */
+#define	IEEE80211_CHAN_HALF	0x4000	/* Half rate channel */
+#define	IEEE80211_CHAN_QUARTER	0x8000	/* Quarter rate channel */
+
+/*
+ * Useful combinations of channel characteristics.
+ */
+#define	IEEE80211_CHAN_FHSS \
+	(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK)
+#define	IEEE80211_CHAN_A \
+	(IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM)
+#define	IEEE80211_CHAN_B \
+	(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK)
+#define	IEEE80211_CHAN_PUREG \
+	(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM)
+#define	IEEE80211_CHAN_G \
+	(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN)
+#define IEEE80211_CHAN_108A \
+	(IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO)
+#define	IEEE80211_CHAN_108G \
+	(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO)
+#define	IEEE80211_CHAN_ST \
+	(IEEE80211_CHAN_108A | IEEE80211_CHAN_STURBO)
+
+#define	IEEE80211_CHAN_ALL \
+	(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \
+	 IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN)
+#define	IEEE80211_CHAN_ALLTURBO \
+	(IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)
+
+#define	IEEE80211_IS_CHAN_FHSS(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS)
+#define	IEEE80211_IS_CHAN_A(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A)
+#define	IEEE80211_IS_CHAN_B(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B)
+#define	IEEE80211_IS_CHAN_PUREG(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG)
+#define	IEEE80211_IS_CHAN_G(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G)
+#define	IEEE80211_IS_CHAN_ANYG(_c) \
+	(IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c))
+#define	IEEE80211_IS_CHAN_ST(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST)
+#define	IEEE80211_IS_CHAN_108A(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A)
+#define	IEEE80211_IS_CHAN_108G(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G)
+
+#define	IEEE80211_IS_CHAN_2GHZ(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0)
+#define	IEEE80211_IS_CHAN_5GHZ(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0)
+#define	IEEE80211_IS_CHAN_OFDM(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_OFDM) != 0)
+#define	IEEE80211_IS_CHAN_CCK(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_CCK) != 0)
+#define	IEEE80211_IS_CHAN_GFSK(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0)
+#define	IEEE80211_IS_CHAN_TURBO(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_TURBO) != 0)
+#define	IEEE80211_IS_CHAN_STURBO(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_STURBO) != 0)
+#define	IEEE80211_IS_CHAN_DTURBO(_c) \
+	(((_c)->ic_flags & \
+	(IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)) == IEEE80211_CHAN_TURBO)
+#define	IEEE80211_IS_CHAN_HALF(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_HALF) != 0)
+#define	IEEE80211_IS_CHAN_QUARTER(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_QUARTER) != 0)
+
+#define	IEEE80211_IS_CHAN_RADAR(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_RADAR) != 0)
+#define	IEEE80211_IS_CHAN_PASSIVE(_c) \
+	(((_c)->ic_flags & IEEE80211_CHAN_PASSIVE) != 0)
+#define	IEEE80211_ARE_CHANS_SAME_MODE(_a, _b) \
+	(((_a)->ic_flags & IEEE80211_CHAN_ALLTURBO) == ((_b)->ic_flags & IEEE80211_CHAN_ALLTURBO))
+
+/* ni_chan encoding for FH phy */
+#define	IEEE80211_FH_CHANMOD		80
+#define	IEEE80211_FH_CHAN(set,pat)	(((set) - 1) * IEEE80211_FH_CHANMOD + (pat))
+#define	IEEE80211_FH_CHANSET(chan)	((chan) / IEEE80211_FH_CHANMOD + 1)
+#define	IEEE80211_FH_CHANPAT(chan)	((chan) % IEEE80211_FH_CHANMOD)
+
+/*
+ * Spectrum Management (IEEE 802.11h-2003)
+ */
+
+/* algorithm for (re)association based on supported channels
+ * (the one mentioned in 11.6.1 as out of scope of .11h) */
+enum ieee80211_sc_algorithm {
+	IEEE80211_SC_NONE,
+	/*
+	 * Do not disallow anyone from associating. When needed, channel will
+	 * be switched to the most suitable channel, no matter client stations
+	 * support it or not.
+	 */
+
+	IEEE80211_SC_LOOSE,
+	/*
+	 * Do not disallow anyone from associating. When needed, channel will
+	 * be switched to a suitable channel, which will be chosen taking
+	 * ni->ni_suppchans and ic->ic_sc_sldg under consideration.
+	 */
+
+	IEEE80211_SC_TIGHT,
+	/*
+	 * Allow to associate if there are at least ic->ic_mincom channels
+	 * common to the associating station and all of the already associated
+	 * stations. If the number of new common channels is less than
+	 * required, consider disassociating some other STAs. Such a
+	 * disassociation will be performed if (and only if) the association we
+	 * are currently considering would be then possible and the count of
+	 * the resultant set of common channels (ic_chan_nodes[i] ==
+	 * ic_cn_total) would increase by some amount. Whether the number of
+	 * the new channels that could be gained is enough to sacrifice a
+	 * number of STAs is determined by the ic->ic_slcg parameter.
+	 */
+
+	IEEE80211_SC_STRICT
+	/*
+	 * Basically the same behavior as IEEE80211_SC_TIGHT, except that if a
+	 * station does not specify Supported Channels, then it is denied to
+	 * associate.
+	 */
+};
+
+/*
+ * 802.11 rate set.
+ */
+#define	IEEE80211_RATE_SIZE	8		/* 802.11 standard */
+#define	IEEE80211_RATE_MAXSIZE	15		/* max rates we'll handle */
+#define	IEEE80211_SANITISE_RATESIZE(_rsz) \
+	((_rsz > IEEE80211_RATE_MAXSIZE) ? IEEE80211_RATE_MAXSIZE : _rsz)
+
+struct ieee80211_rateset {
+	u_int8_t rs_nrates;
+	u_int8_t rs_rates[IEEE80211_RATE_MAXSIZE];
+};
+
+struct ieee80211_roam {
+	int8_t rssi11a;		/* rssi thresh for 11a bss */
+	int8_t rssi11b;		/* for 11g sta in 11b bss */
+	int8_t rssi11bOnly;	/* for 11b sta */
+	u_int8_t pad1;
+	u_int8_t rate11a;	/* rate thresh for 11a bss */
+	u_int8_t rate11b;	/* for 11g sta in 11b bss */
+	u_int8_t rate11bOnly;	/* for 11b sta */
+	u_int8_t pad2;
+};
+#endif /* _NET80211__IEEE80211_H_ */
diff --git a/package/network/services/hostapd/madwifi/net80211/ieee80211.h b/package/network/services/hostapd/madwifi/net80211/ieee80211.h
new file mode 100644
index 0000000..a39d4b9
--- /dev/null
+++ b/package/network/services/hostapd/madwifi/net80211/ieee80211.h
@@ -0,0 +1,997 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $Id: ieee80211.h 3268 2008-01-26 20:48:11Z mtaylor $
+ */
+#ifndef _NET80211_IEEE80211_H_
+#define _NET80211_IEEE80211_H_
+
+/*
+ * 802.11 protocol definitions.
+ */
+
+#define	IEEE80211_ADDR_LEN		6		/* size of 802.11 address */
+/* is 802.11 address multicast/broadcast? */
+#define	IEEE80211_IS_MULTICAST(_a)	(*(_a) & 0x01)
+
+/* IEEE 802.11 PLCP header */
+struct ieee80211_plcp_hdr {
+	u_int16_t i_sfd;
+	u_int8_t i_signal;
+	u_int8_t i_service;
+	u_int16_t i_length;
+	u_int16_t i_crc;
+} __packed;
+
+#define IEEE80211_PLCP_SFD      0xF3A0
+#define IEEE80211_PLCP_SERVICE  0x00
+
+/*
+ * generic definitions for IEEE 802.11 frames
+ */
+struct ieee80211_frame {
+	u_int8_t i_fc[2];
+	__le16 i_dur;
+	u_int8_t i_addr1[IEEE80211_ADDR_LEN];
+	u_int8_t i_addr2[IEEE80211_ADDR_LEN];
+	u_int8_t i_addr3[IEEE80211_ADDR_LEN];
+	u_int8_t i_seq[2];
+	/* possibly followed by addr4[IEEE80211_ADDR_LEN]; */
+	/* see below */
+} __packed;
+
+struct ieee80211_qosframe {
+	u_int8_t i_fc[2];
+	__le16 i_dur;
+	u_int8_t i_addr1[IEEE80211_ADDR_LEN];
+	u_int8_t i_addr2[IEEE80211_ADDR_LEN];
+	u_int8_t i_addr3[IEEE80211_ADDR_LEN];
+	u_int8_t i_seq[2];
+	u_int8_t i_qos[2];
+	/* possibly followed by addr4[IEEE80211_ADDR_LEN]; */
+	/* see below */
+} __packed;
+
+struct ieee80211_qoscntl {
+	u_int8_t i_qos[2];
+};
+
+struct ieee80211_frame_addr4 {
+	u_int8_t i_fc[2];
+	__le16 i_dur;
+	u_int8_t i_addr1[IEEE80211_ADDR_LEN];
+	u_int8_t i_addr2[IEEE80211_ADDR_LEN];
+	u_int8_t i_addr3[IEEE80211_ADDR_LEN];
+	u_int8_t i_seq[2];
+	u_int8_t i_addr4[IEEE80211_ADDR_LEN];
+} __packed;
+
+
+struct ieee80211_qosframe_addr4 {
+	u_int8_t i_fc[2];
+	__le16 i_dur;
+	u_int8_t i_addr1[IEEE80211_ADDR_LEN];
+	u_int8_t i_addr2[IEEE80211_ADDR_LEN];
+	u_int8_t i_addr3[IEEE80211_ADDR_LEN];
+	u_int8_t i_seq[2];
+	u_int8_t i_addr4[IEEE80211_ADDR_LEN];
+	u_int8_t i_qos[2];
+} __packed;
+
+struct ieee80211_ctlframe_addr2 {
+	u_int8_t i_fc[2];
+	__le16 i_aidordur; /* AID or duration */
+	u_int8_t i_addr1[IEEE80211_ADDR_LEN];
+	u_int8_t i_addr2[IEEE80211_ADDR_LEN];
+} __packed;
+
+#define	IEEE80211_FC0_VERSION_MASK		0x03
+#define	IEEE80211_FC0_VERSION_SHIFT		0
+#define	IEEE80211_FC0_VERSION_0			0x00
+#define	IEEE80211_FC0_TYPE_MASK			0x0c
+#define	IEEE80211_FC0_TYPE_SHIFT		2
+#define	IEEE80211_FC0_TYPE_MGT			0x00
+#define	IEEE80211_FC0_TYPE_CTL			0x04
+#define	IEEE80211_FC0_TYPE_DATA			0x08
+
+#define	IEEE80211_FC0_SUBTYPE_MASK		0xf0
+#define	IEEE80211_FC0_SUBTYPE_SHIFT		4
+/* for TYPE_MGT */
+#define	IEEE80211_FC0_SUBTYPE_ASSOC_REQ		0x00
+#define	IEEE80211_FC0_SUBTYPE_ASSOC_RESP	0x10
+#define	IEEE80211_FC0_SUBTYPE_REASSOC_REQ	0x20
+#define	IEEE80211_FC0_SUBTYPE_REASSOC_RESP	0x30
+#define	IEEE80211_FC0_SUBTYPE_PROBE_REQ		0x40
+#define	IEEE80211_FC0_SUBTYPE_PROBE_RESP	0x50
+#define	IEEE80211_FC0_SUBTYPE_BEACON		0x80
+#define	IEEE80211_FC0_SUBTYPE_ATIM		0x90
+#define	IEEE80211_FC0_SUBTYPE_DISASSOC		0xa0
+#define	IEEE80211_FC0_SUBTYPE_AUTH		0xb0
+#define	IEEE80211_FC0_SUBTYPE_DEAUTH		0xc0
+#define IEEE80211_FC0_SUBTYPE_ACTION		0xd0
+/* for TYPE_CTL */
+#define	IEEE80211_FC0_SUBTYPE_PS_POLL		0xa0
+#define	IEEE80211_FC0_SUBTYPE_RTS		0xb0
+#define	IEEE80211_FC0_SUBTYPE_CTS		0xc0
+#define	IEEE80211_FC0_SUBTYPE_ACK		0xd0
+#define	IEEE80211_FC0_SUBTYPE_CF_END		0xe0
+#define	IEEE80211_FC0_SUBTYPE_CF_END_ACK	0xf0
+/* for TYPE_DATA (bit combination) */
+#define	IEEE80211_FC0_SUBTYPE_DATA		0x00
+#define	IEEE80211_FC0_SUBTYPE_CF_ACK		0x10
+#define	IEEE80211_FC0_SUBTYPE_CF_POLL		0x20
+#define	IEEE80211_FC0_SUBTYPE_CF_ACPL		0x30
+#define	IEEE80211_FC0_SUBTYPE_NODATA		0x40
+#define	IEEE80211_FC0_SUBTYPE_CFACK		0x50
+#define	IEEE80211_FC0_SUBTYPE_CFPOLL		0x60
+#define	IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK	0x70
+#define	IEEE80211_FC0_SUBTYPE_QOS		0x80
+#define	IEEE80211_FC0_SUBTYPE_QOS_NULL		0xc0
+
+#define	IEEE80211_FC1_DIR_MASK			0x03
+#define	IEEE80211_FC1_DIR_NODS			0x00	/* STA->STA */
+#define	IEEE80211_FC1_DIR_TODS			0x01	/* STA->AP  */
+#define	IEEE80211_FC1_DIR_FROMDS		0x02	/* AP ->STA */
+#define	IEEE80211_FC1_DIR_DSTODS		0x03	/* AP ->AP  */
+
+#define	IEEE80211_FC1_MORE_FRAG			0x04
+#define	IEEE80211_FC1_RETRY			0x08
+#define	IEEE80211_FC1_PWR_MGT			0x10
+#define	IEEE80211_FC1_MORE_DATA			0x20
+#define	IEEE80211_FC1_PROT			0x40
+#define	IEEE80211_FC1_ORDER			0x80
+
+#define	IEEE80211_SEQ_FRAG_MASK			0x000f
+#define	IEEE80211_SEQ_FRAG_SHIFT		0
+#define	IEEE80211_SEQ_SEQ_MASK			0xfff0
+#define	IEEE80211_SEQ_SEQ_SHIFT			4
+
+#define	IEEE80211_NWID_LEN			32
+
+#define	IEEE80211_QOS_TXOP			0x00ff
+/* bit 8 is reserved */
+#define	IEEE80211_QOS_ACKPOLICY			0x60
+#define	IEEE80211_QOS_ACKPOLICY_S		5
+#define	IEEE80211_QOS_EOSP			0x10
+#define	IEEE80211_QOS_EOSP_S			4
+#define	IEEE80211_QOS_TID			0x0f
+
+#define IEEE80211_FRM_HAS_BODY(_wh)			\
+	(((_wh)->i_fc[0] & IEEE80211_FC0_TYPE_MASK) !=	\
+			IEEE80211_FC0_TYPE_CTL)
+
+/*
+ * Country/Region Codes from MS WINNLS.H
+ * Numbering from ISO 3166
+ * XXX belongs elsewhere
+ */
+enum CountryCode {
+	CTRY_ALBANIA              = 8,       /* Albania */
+	CTRY_ALGERIA              = 12,      /* Algeria */
+	CTRY_ARGENTINA            = 32,      /* Argentina */
+	CTRY_ARMENIA              = 51,      /* Armenia */
+	CTRY_AUSTRALIA            = 36,      /* Australia */
+	CTRY_AUSTRIA              = 40,      /* Austria */
+	CTRY_AZERBAIJAN           = 31,      /* Azerbaijan */
+	CTRY_BAHRAIN              = 48,      /* Bahrain */
+	CTRY_BELARUS              = 112,     /* Belarus */
+	CTRY_BELGIUM              = 56,      /* Belgium */
+	CTRY_BELIZE               = 84,      /* Belize */
+	CTRY_BOLIVIA              = 68,      /* Bolivia */
+	CTRY_BRAZIL               = 76,      /* Brazil */
+	CTRY_BRUNEI_DARUSSALAM    = 96,      /* Brunei Darussalam */
+	CTRY_BULGARIA             = 100,     /* Bulgaria */
+	CTRY_CANADA               = 124,     /* Canada */
+	CTRY_CHILE                = 152,     /* Chile */
+	CTRY_CHINA                = 156,     /* People's Republic of China */
+	CTRY_COLOMBIA             = 170,     /* Colombia */
+	CTRY_COSTA_RICA           = 188,     /* Costa Rica */
+	CTRY_CROATIA              = 191,     /* Croatia */
+	CTRY_CYPRUS               = 196,
+	CTRY_CZECH                = 203,     /* Czech Republic */
+	CTRY_DENMARK              = 208,     /* Denmark */
+	CTRY_DOMINICAN_REPUBLIC   = 214,     /* Dominican Republic */
+	CTRY_ECUADOR              = 218,     /* Ecuador */
+	CTRY_EGYPT                = 818,     /* Egypt */
+	CTRY_EL_SALVADOR          = 222,     /* El Salvador */
+	CTRY_ESTONIA              = 233,     /* Estonia */
+	CTRY_FAEROE_ISLANDS       = 234,     /* Faeroe Islands */
+	CTRY_FINLAND              = 246,     /* Finland */
+	CTRY_FRANCE               = 250,     /* France */
+	CTRY_FRANCE2              = 255,     /* France2 */
+	CTRY_GEORGIA              = 268,     /* Georgia */
+	CTRY_GERMANY              = 276,     /* Germany */
+	CTRY_GREECE               = 300,     /* Greece */
+	CTRY_GUATEMALA            = 320,     /* Guatemala */
+	CTRY_HONDURAS             = 340,     /* Honduras */
+	CTRY_HONG_KONG            = 344,     /* Hong Kong S.A.R., P.R.C. */
+	CTRY_HUNGARY              = 348,     /* Hungary */
+	CTRY_ICELAND              = 352,     /* Iceland */
+	CTRY_INDIA                = 356,     /* India */
+	CTRY_INDONESIA            = 360,     /* Indonesia */
+	CTRY_IRAN                 = 364,     /* Iran */
+	CTRY_IRAQ                 = 368,     /* Iraq */
+	CTRY_IRELAND              = 372,     /* Ireland */
+	CTRY_ISRAEL               = 376,     /* Israel */
+	CTRY_ITALY                = 380,     /* Italy */
+	CTRY_JAMAICA              = 388,     /* Jamaica */
+	CTRY_JAPAN                = 392,     /* Japan */
+	CTRY_JAPAN1               = 393,     /* Japan (JP1) */
+	CTRY_JAPAN2               = 394,     /* Japan (JP0) */
+	CTRY_JAPAN3               = 395,     /* Japan (JP1-1) */
+	CTRY_JAPAN4               = 396,     /* Japan (JE1) */
+	CTRY_JAPAN5               = 397,     /* Japan (JE2) */
+	CTRY_JAPAN6               = 399,	 /* Japan (JP6) */
+	CTRY_JAPAN7               = 900,	 /* Japan */
+	CTRY_JAPAN8               = 901,	 /* Japan */
+	CTRY_JAPAN9               = 902,	 /* Japan */
+	CTRY_JAPAN10	      = 903,	 /* Japan */
+	CTRY_JAPAN11	      = 904,	 /* Japan */
+	CTRY_JAPAN12	      = 905,	 /* Japan */
+	CTRY_JAPAN13	      = 906,	 /* Japan */
+	CTRY_JAPAN14	      = 907,	 /* Japan */
+	CTRY_JAPAN15	      = 908,	 /* Japan */
+	CTRY_JAPAN16	      = 909,	 /* Japan */
+	CTRY_JAPAN17	      = 910,	 /* Japan */
+	CTRY_JAPAN18	      = 911,	 /* Japan */
+	CTRY_JAPAN19	      = 912,	 /* Japan */
+	CTRY_JAPAN20	      = 913,	 /* Japan */
+	CTRY_JAPAN21	      = 914,	 /* Japan */
+	CTRY_JAPAN22	      = 915,	 /* Japan */
+	CTRY_JAPAN23	      = 916,	 /* Japan */
+	CTRY_JAPAN24	      = 917,	 /* Japan */
+	CTRY_JAPAN25	      = 918,	 /* Japan */
+	CTRY_JAPAN26	      = 919,	 /* Japan */
+	CTRY_JAPAN27	      = 920,	 /* Japan */
+	CTRY_JAPAN28	      = 921,	 /* Japan */
+	CTRY_JAPAN29	      = 922,	 /* Japan */
+	CTRY_JAPAN30	      = 923,	 /* Japan */
+	CTRY_JAPAN31	      = 924,	 /* Japan */
+	CTRY_JAPAN32	      = 925,	 /* Japan */
+	CTRY_JAPAN33	      = 926,	 /* Japan */
+	CTRY_JAPAN34	      = 927,	 /* Japan */
+	CTRY_JAPAN35	      = 928,	 /* Japan */
+	CTRY_JAPAN36	      = 929,	 /* Japan */
+	CTRY_JAPAN37	      = 930,	 /* Japan */
+	CTRY_JAPAN38	      = 931,	 /* Japan */
+	CTRY_JAPAN39	      = 932,	 /* Japan */
+	CTRY_JAPAN40	      = 933,	 /* Japan */
+	CTRY_JAPAN41	      = 934,	 /* Japan */
+	CTRY_JAPAN42	      = 935,	 /* Japan */
+	CTRY_JAPAN43	      = 936,	 /* Japan */
+	CTRY_JAPAN44	      = 937,	 /* Japan */
+	CTRY_JAPAN45	      = 938,	 /* Japan */
+	CTRY_JAPAN46	      = 939,	 /* Japan */
+	CTRY_JAPAN47	      = 940,	 /* Japan */
+	CTRY_JAPAN48	      = 941,	 /* Japan */
+	CTRY_JORDAN               = 400,     /* Jordan */
+	CTRY_KAZAKHSTAN           = 398,     /* Kazakhstan */
+	CTRY_KENYA                = 404,     /* Kenya */
+	CTRY_KOREA_NORTH          = 408,     /* North Korea */
+	CTRY_KOREA_ROC            = 410,     /* South Korea */
+	CTRY_KOREA_ROC2           = 411,     /* South Korea */
+	CTRY_KUWAIT               = 414,     /* Kuwait */
+	CTRY_LATVIA               = 428,     /* Latvia */
+	CTRY_LEBANON              = 422,     /* Lebanon */
+	CTRY_LIBYA                = 434,     /* Libya */
+	CTRY_LIECHTENSTEIN        = 438,     /* Liechtenstein */
+	CTRY_LITHUANIA            = 440,     /* Lithuania */
+	CTRY_LUXEMBOURG           = 442,     /* Luxembourg */
+	CTRY_MACAU                = 446,     /* Macau */
+	CTRY_MACEDONIA            = 807,     /* the Former Yugoslav Republic of Macedonia */
+	CTRY_MALAYSIA             = 458,     /* Malaysia */
+	CTRY_MEXICO               = 484,     /* Mexico */
+	CTRY_MONACO               = 492,     /* Principality of Monaco */
+	CTRY_MOROCCO              = 504,     /* Morocco */
+	CTRY_NETHERLANDS          = 528,     /* Netherlands */
+	CTRY_NEW_ZEALAND          = 554,     /* New Zealand */
+	CTRY_NICARAGUA            = 558,     /* Nicaragua */
+	CTRY_NORWAY               = 578,     /* Norway */
+	CTRY_OMAN                 = 512,     /* Oman */
+	CTRY_PAKISTAN             = 586,     /* Islamic Republic of Pakistan */
+	CTRY_PANAMA               = 591,     /* Panama */
+	CTRY_PARAGUAY             = 600,     /* Paraguay */
+	CTRY_PERU                 = 604,     /* Peru */
+	CTRY_PHILIPPINES          = 608,     /* Republic of the Philippines */
+	CTRY_POLAND               = 616,     /* Poland */
+	CTRY_PORTUGAL             = 620,     /* Portugal */
+	CTRY_PUERTO_RICO          = 630,     /* Puerto Rico */
+	CTRY_QATAR                = 634,     /* Qatar */
+	CTRY_ROMANIA              = 642,     /* Romania */
+	CTRY_RUSSIA               = 643,     /* Russia */
+	CTRY_SAUDI_ARABIA         = 682,     /* Saudi Arabia */
+	CTRY_SINGAPORE            = 702,     /* Singapore */
+	CTRY_SLOVAKIA             = 703,     /* Slovak Republic */
+	CTRY_SLOVENIA             = 705,     /* Slovenia */
+	CTRY_SOUTH_AFRICA         = 710,     /* South Africa */
+	CTRY_SPAIN                = 724,     /* Spain */
+	CTRY_SWEDEN               = 752,     /* Sweden */
+	CTRY_SWITZERLAND          = 756,     /* Switzerland */
+	CTRY_SYRIA                = 760,     /* Syria */
+	CTRY_TAIWAN               = 158,     /* Taiwan */
+	CTRY_THAILAND             = 764,     /* Thailand */
+	CTRY_TRINIDAD_Y_TOBAGO    = 780,     /* Trinidad y Tobago */
+	CTRY_TUNISIA              = 788,     /* Tunisia */
+	CTRY_TURKEY               = 792,     /* Turkey */
+	CTRY_UAE                  = 784,     /* U.A.E. */
+	CTRY_UKRAINE              = 804,     /* Ukraine */
+	CTRY_UNITED_KINGDOM       = 826,     /* United Kingdom */
+	CTRY_UNITED_STATES        = 840,     /* United States */
+	CTRY_UNITED_STATES_FCC49  = 842,     /* United States (Public Safety)*/
+	CTRY_URUGUAY              = 858,     /* Uruguay */
+	CTRY_UZBEKISTAN           = 860,     /* Uzbekistan */
+	CTRY_VENEZUELA            = 862,     /* Venezuela */
+	CTRY_VIET_NAM             = 704,     /* Viet Nam */
+	CTRY_YEMEN                = 887,     /* Yemen */
+	CTRY_ZIMBABWE             = 716      /* Zimbabwe */
+};
+
+/* 
+ * Generic information element
+ */
+struct ieee80211_ie {
+	u_int8_t id;
+	u_int8_t len;
+	u_int8_t info[0];
+} __packed;
+
+/* 
+ * Country information element.
+ */
+#define IEEE80211_COUNTRY_MAX_TRIPLETS (83)
+struct ieee80211_ie_country {
+	u_int8_t country_id;
+	u_int8_t country_len;
+	u_int8_t country_str[3];
+	u_int8_t country_triplet[IEEE80211_COUNTRY_MAX_TRIPLETS * 3];
+} __packed;
+
+/*
+ * Power Constraint information element.
+ */
+struct ieee80211_ie_pwrcnstr {
+	u_int8_t pc_id;			/* IEEE80211_ELEMID_PWRCNSTR */
+	u_int8_t pc_len;		/* == 2 */
+	u_int8_t pc_lpc;		/* Local Power Constraint [dB] */
+} __packed;
+
+/*
+ * Power Capability information element.
+ */
+struct ieee80211_ie_pwrcap {
+	u_int8_t pc_id;			/* IEEE80211_ELEMID_PWRCAP */
+	u_int8_t pc_len;		/* == 2 */
+	int8_t pc_mintxpow;		/* Minimum Transmit Power Capability [dBm] */
+	int8_t pc_maxtxpow;		/* Maximum Transmit Power Capability [dBm] */
+} __packed;
+
+/*
+ * Supported Channels information element.
+ */
+#define IEEE80211_SUPPCHAN_MAX_PAIRS (127)
+struct ieee80211_ie_sc {
+	u_int8_t sc_id;			/* IEEE80211_ELEMID_SUPPCHAN */
+	u_int8_t sc_len;		/* == 2 * number of sc_subband elements */
+	struct {
+		u_int8_t sc_first;	/* First Channel Number */
+		u_int8_t sc_number;	/* Number of Channels */
+	} __packed sc_subband[IEEE80211_SUPPCHAN_MAX_PAIRS];
+} __packed;
+
+/*
+ * Channel Switch Announcement information element.
+ */
+struct ieee80211_ie_csa {
+	u_int8_t csa_id;	/* IEEE80211_ELEMID_CHANSWITCHANN */
+	u_int8_t csa_len;	/* == 3 */
+	u_int8_t csa_mode;	/* Channel Switch Mode: 1 == stop transmission until CS */
+	u_int8_t csa_chan;	/* New Channel Number */
+	u_int8_t csa_count;	/* TBTTs until Channel Switch happens */
+} __packed;
+
+/* minimal Channel Switch Count in the initial announcement */
+#define IEEE80211_CSA_PROTECTION_PERIOD 3
+
+/* maximum allowed deviance of measurement of intervals between CSA in Beacons */
+#define IEEE80211_CSA_SANITY_THRESHOLD 100
+
+
+/* does frame have QoS sequence control data */
+#define	IEEE80211_QOS_HAS_SEQ(wh) \
+	(((wh)->i_fc[0] & \
+	  (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_QOS)) == \
+	  (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
+
+#define WME_QOSINFO_COUNT	0x0f  /* Mask for Param Set Count field */
+/*
+ * WME/802.11e information element.
+ */
+struct ieee80211_ie_wme {
+	u_int8_t wme_id;		/* IEEE80211_ELEMID_VENDOR */
+	u_int8_t wme_len;	/* length in bytes */
+	u_int8_t wme_oui[3];	/* 0x00, 0x50, 0xf2 */
+	u_int8_t wme_type;	/* OUI type */
+	u_int8_t wme_subtype;	/* OUI subtype */
+	u_int8_t wme_version;	/* spec revision */
+	u_int8_t wme_info;	/* QoS info */
+} __packed;
+
+/*
+ * WME/802.11e Tspec Element
+ */
+struct ieee80211_wme_tspec {
+	u_int8_t ts_id;
+	u_int8_t ts_len;
+	u_int8_t ts_oui[3];
+	u_int8_t ts_oui_type;
+	u_int8_t ts_oui_subtype;
+	u_int8_t ts_version;
+	u_int8_t ts_tsinfo[3];
+	u_int8_t ts_nom_msdu[2];
+	u_int8_t ts_max_msdu[2];
+	u_int8_t ts_min_svc[4];
+	u_int8_t ts_max_svc[4];
+	u_int8_t ts_inactv_intv[4];
+	u_int8_t ts_susp_intv[4];
+	u_int8_t ts_start_svc[4];
+	u_int8_t ts_min_rate[4];
+	u_int8_t ts_mean_rate[4];
+	u_int8_t ts_max_burst[4];
+	u_int8_t ts_min_phy[4];
+	u_int8_t ts_peak_rate[4];
+	u_int8_t ts_delay[4];
+	u_int8_t ts_surplus[2];
+	u_int8_t ts_medium_time[2];
+} __packed;
+
+/*
+ * WME AC parameter field
+ */
+
+struct ieee80211_wme_acparams {
+	u_int8_t acp_aci_aifsn;
+	u_int8_t acp_logcwminmax;
+	u_int16_t acp_txop;
+} __packed;
+
+#define IEEE80211_WME_PARAM_LEN 24
+#define WME_NUM_AC		4	/* 4 AC categories */
+
+#define WME_PARAM_ACI		0x60	/* Mask for ACI field */
+#define WME_PARAM_ACI_S		5	/* Shift for ACI field */
+#define WME_PARAM_ACM		0x10	/* Mask for ACM bit */
+#define WME_PARAM_ACM_S		4	/* Shift for ACM bit */
+#define WME_PARAM_AIFSN		0x0f	/* Mask for aifsn field */
+#define WME_PARAM_AIFSN_S	0	/* Shift for aifsn field */
+#define WME_PARAM_LOGCWMIN	0x0f	/* Mask for CwMin field (in log) */
+#define WME_PARAM_LOGCWMIN_S	0	/* Shift for CwMin field */
+#define WME_PARAM_LOGCWMAX	0xf0	/* Mask for CwMax field (in log) */
+#define WME_PARAM_LOGCWMAX_S	4	/* Shift for CwMax field */
+
+#define WME_AC_TO_TID(_ac) (       \
+	((_ac) == WME_AC_VO) ? 6 : \
+	((_ac) == WME_AC_VI) ? 5 : \
+	((_ac) == WME_AC_BK) ? 1 : \
+	0)
+
+#define TID_TO_WME_AC(_tid) (      \
+	((_tid) < 1) ? WME_AC_BE : \
+	((_tid) < 3) ? WME_AC_BK : \
+	((_tid) < 6) ? WME_AC_VI : \
+	WME_AC_VO)
+
+/*
+ * WME Parameter Element
+ */
+
+struct ieee80211_wme_param {
+	u_int8_t param_id;
+	u_int8_t param_len;
+	u_int8_t param_oui[3];
+	u_int8_t param_oui_type;
+	u_int8_t param_oui_sybtype;
+	u_int8_t param_version;
+	u_int8_t param_qosInfo;
+	u_int8_t param_reserved;
+	struct ieee80211_wme_acparams	params_acParams[WME_NUM_AC];
+} __packed;
+
+/*
+ * WME U-APSD qos info field defines
+ */
+#define WME_CAPINFO_UAPSD_EN			0x00000080
+#define WME_CAPINFO_UAPSD_VO			0x00000001
+#define WME_CAPINFO_UAPSD_VI			0x00000002
+#define WME_CAPINFO_UAPSD_BK			0x00000004
+#define WME_CAPINFO_UAPSD_BE			0x00000008
+#define WME_CAPINFO_UAPSD_ACFLAGS_SHIFT		0
+#define WME_CAPINFO_UAPSD_ACFLAGS_MASK		0xF
+#define WME_CAPINFO_UAPSD_MAXSP_SHIFT		5
+#define WME_CAPINFO_UAPSD_MAXSP_MASK		0x3
+#define WME_CAPINFO_IE_OFFSET			8
+#define WME_UAPSD_MAXSP(_qosinfo)					\
+		(((_qosinfo) >> WME_CAPINFO_UAPSD_MAXSP_SHIFT) & 	\
+		 WME_CAPINFO_UAPSD_MAXSP_MASK)
+#define WME_UAPSD_AC_ENABLED(_ac, _qosinfo)				\
+		((1 << (3 - (_ac))) & (					\
+		 ((_qosinfo) >> WME_CAPINFO_UAPSD_ACFLAGS_SHIFT) &	\
+		 WME_CAPINFO_UAPSD_ACFLAGS_MASK))
+
+/*
+ * Atheros Advanced Capability information element.
+ */
+struct ieee80211_ie_athAdvCap {
+	u_int8_t athAdvCap_id;		/* IEEE80211_ELEMID_VENDOR */
+	u_int8_t athAdvCap_len;		/* length in bytes */
+	u_int8_t athAdvCap_oui[3];	/* 0x00, 0x03, 0x7f */
+	u_int8_t athAdvCap_type;	/* OUI type */
+	u_int8_t athAdvCap_subtype;	/* OUI subtype */
+	u_int8_t athAdvCap_version;	/* spec revision */
+	u_int8_t athAdvCap_capability;	/* Capability info */
+	u_int16_t athAdvCap_defKeyIndex;
+} __packed;
+
+/*
+ * Atheros XR information element.
+ */
+struct ieee80211_xr_param {
+	u_int8_t param_id;
+	u_int8_t param_len;
+	u_int8_t param_oui[3];
+	u_int8_t param_oui_type;
+	u_int8_t param_oui_sybtype;
+	u_int8_t param_version;
+	u_int8_t param_Info;
+	u_int8_t param_base_bssid[IEEE80211_ADDR_LEN];
+	u_int8_t param_xr_bssid[IEEE80211_ADDR_LEN];
+	u_int16_t param_xr_beacon_interval;
+	u_int8_t param_base_ath_capability;
+	u_int8_t param_xr_ath_capability;
+} __packed;
+
+/* Atheros capabilities */
+#define IEEE80211_ATHC_TURBOP	0x0001		/* Turbo Prime */
+#define IEEE80211_ATHC_COMP	0x0002		/* Compression */
+#define IEEE80211_ATHC_FF	0x0004		/* Fast Frames */
+#define IEEE80211_ATHC_XR	0x0008		/* Xtended Range support */
+#define IEEE80211_ATHC_AR	0x0010		/* Advanced Radar support */
+#define IEEE80211_ATHC_BURST	0x0020		/* Bursting - not negotiated */
+#define IEEE80211_ATHC_WME	0x0040		/* CWMin tuning */
+#define IEEE80211_ATHC_BOOST	0x0080		/* Boost */
+
+/*
+ * Management Notification Frame
+ */
+struct ieee80211_mnf {
+	u_int8_t mnf_category;
+	u_int8_t mnf_action;
+	u_int8_t mnf_dialog;
+	u_int8_t mnf_status;
+} __packed;
+#define	MNF_SETUP_REQ	0
+#define	MNF_SETUP_RESP	1
+#define	MNF_TEARDOWN	2
+
+/*
+ * Control frames.
+ */
+struct ieee80211_frame_min {
+	u_int8_t i_fc[2];
+	__le16 i_dur;
+	u_int8_t i_addr1[IEEE80211_ADDR_LEN];
+	u_int8_t i_addr2[IEEE80211_ADDR_LEN];
+	/* FCS */
+} __packed;
+
+struct ieee80211_frame_rts {
+	u_int8_t i_fc[2];
+	__le16 i_dur;
+	u_int8_t i_ra[IEEE80211_ADDR_LEN];
+	u_int8_t i_ta[IEEE80211_ADDR_LEN];
+	/* FCS */
+} __packed;
+
+struct ieee80211_frame_cts {
+	u_int8_t i_fc[2];
+	__le16 i_dur;
+	u_int8_t i_ra[IEEE80211_ADDR_LEN];
+	/* FCS */
+} __packed;
+
+struct ieee80211_frame_ack {
+	u_int8_t i_fc[2];
+	__le16 i_dur;
+	u_int8_t i_ra[IEEE80211_ADDR_LEN];
+	/* FCS */
+} __packed;
+
+struct ieee80211_frame_pspoll {
+	u_int8_t i_fc[2];
+	u_int8_t i_aid[2];
+	u_int8_t i_bssid[IEEE80211_ADDR_LEN];
+	u_int8_t i_ta[IEEE80211_ADDR_LEN];
+	/* FCS */
+} __packed;
+
+struct ieee80211_frame_cfend {		/* NB: also CF-End+CF-Ack */
+	u_int8_t i_fc[2];
+	__le16 i_dur;	/* should be zero */
+	u_int8_t i_ra[IEEE80211_ADDR_LEN];
+	u_int8_t i_bssid[IEEE80211_ADDR_LEN];
+	/* FCS */
+} __packed;
+
+/*
+ * BEACON management packets
+ *
+ *	octet timestamp[8]
+ *	octet beacon interval[2]
+ *	octet capability information[2]
+ *	information element
+ *		octet elemid
+ *		octet length
+ *		octet information[length]
+ */
+
+typedef u_int8_t *ieee80211_mgt_beacon_t;
+
+#define	IEEE80211_BEACON_INTERVAL(beacon) \
+	((beacon)[8] | ((beacon)[9] << 8))
+#define	IEEE80211_BEACON_CAPABILITY(beacon) \
+	((beacon)[10] | ((beacon)[11] << 8))
+
+#define	IEEE80211_CAPINFO_ESS			0x0001
+#define	IEEE80211_CAPINFO_IBSS			0x0002
+#define	IEEE80211_CAPINFO_CF_POLLABLE		0x0004
+#define	IEEE80211_CAPINFO_CF_POLLREQ		0x0008
+#define	IEEE80211_CAPINFO_PRIVACY		0x0010
+#define	IEEE80211_CAPINFO_SHORT_PREAMBLE	0x0020
+#define	IEEE80211_CAPINFO_PBCC			0x0040
+#define	IEEE80211_CAPINFO_CHNL_AGILITY		0x0080
+/* bits 8-9 are reserved (8 now for spectrum management) */
+#define IEEE80211_CAPINFO_SPECTRUM_MGMT		0x0100
+#define	IEEE80211_CAPINFO_SHORT_SLOTTIME	0x0400
+#define	IEEE80211_CAPINFO_RSN			0x0800
+/* bit 12 is reserved */
+#define	IEEE80211_CAPINFO_DSSSOFDM		0x2000
+/* bits 14-15 are reserved */
+
+/*
+ * 802.11i/WPA information element (maximally sized).
+ */
+struct ieee80211_ie_wpa {
+	u_int8_t wpa_id;			/* IEEE80211_ELEMID_VENDOR */
+	u_int8_t wpa_len;		/* length in bytes */
+	u_int8_t wpa_oui[3];		/* 0x00, 0x50, 0xf2 */
+	u_int8_t wpa_type;		/* OUI type */
+	u_int16_t wpa_version;		/* spec revision */
+	u_int32_t wpa_mcipher[1];	/* multicast/group key cipher */
+	u_int16_t wpa_uciphercnt;	/* # pairwise key ciphers */
+	u_int32_t wpa_uciphers[8];	/* ciphers */
+	u_int16_t wpa_authselcnt;	/* authentication selector cnt*/
+	u_int32_t wpa_authsels[8];	/* selectors */
+	u_int16_t wpa_caps;		/* 802.11i capabilities */
+	u_int16_t wpa_pmkidcnt;		/* 802.11i pmkid count */
+	u_int16_t wpa_pmkids[8];	/* 802.11i pmkids */
+} __packed;
+
+/*
+ * Management information element payloads.
+ */
+
+enum {
+	IEEE80211_ELEMID_SSID		= 0,
+	IEEE80211_ELEMID_RATES		= 1,
+	IEEE80211_ELEMID_FHPARMS	= 2,
+	IEEE80211_ELEMID_DSPARMS	= 3,
+	IEEE80211_ELEMID_CFPARMS	= 4,
+	IEEE80211_ELEMID_TIM		= 5,
+	IEEE80211_ELEMID_IBSSPARMS	= 6,
+	IEEE80211_ELEMID_COUNTRY	= 7,
+	IEEE80211_ELEMID_HOPPATRNPARMS  = 8,
+	IEEE80211_ELEMID_HOPPATRNTABLE  = 9,
+	IEEE80211_ELEMID_REQINFO	= 10,
+	IEEE80211_ELEMID_QBSSLOAD       = 11,
+	IEEE80211_ELEMID_EDCAPARAM      = 12,
+	IEEE80211_ELEMID_TSPEC		= 13,
+	IEEE80211_ELEMID_TRAFCLASS      = 14,
+	IEEE80211_ELEMID_SCHEDULE       = 15,
+	IEEE80211_ELEMID_CHALLENGE	= 16,
+	/* 17-31 reserved for challenge text extension */
+	IEEE80211_ELEMID_PWRCNSTR	= 32,
+	IEEE80211_ELEMID_PWRCAP		= 33,
+	IEEE80211_ELEMID_TPCREQ		= 34,
+	IEEE80211_ELEMID_TPCREP		= 35,
+	IEEE80211_ELEMID_SUPPCHAN	= 36,
+	IEEE80211_ELEMID_CHANSWITCHANN	= 37,
+	IEEE80211_ELEMID_MEASREQ	= 38,
+	IEEE80211_ELEMID_MEASREP	= 39,
+	IEEE80211_ELEMID_QUIET		= 40,
+	IEEE80211_ELEMID_IBSSDFS	= 41,
+	IEEE80211_ELEMID_ERP		= 42,
+	IEEE80211_ELEMID_TSDELAY	= 43,
+	IEEE80211_ELEMID_TCLASSPROC     = 44,
+	IEEE80211_ELEMID_QOS		= 46,
+	IEEE80211_ELEMID_RSN		= 48,
+	/* 49 reserved */
+	IEEE80211_ELEMID_XRATES		= 50,
+	/* 128-129 proprietary elements used by Agere chipsets */
+	IEEE80211_ELEMID_AGERE1		= 128,
+	IEEE80211_ELEMID_AGERE2		= 129,
+	IEEE80211_ELEMID_TPC		= 150,
+	IEEE80211_ELEMID_CCKM		= 156,
+	IEEE80211_ELEMID_VENDOR		= 221,	/* vendor private */
+};
+
+#define IEEE80211_CHANSWITCHANN_BYTES 	5
+#define BITCTL_BUFD_MCAST       	1
+#define BITCTL_BUFD_UCAST_AID_MASK 	((u_int8_t)~(BITCTL_BUFD_MCAST))
+#define BITCTL_BUFD_UCAST_AID_SHIFT 	1
+
+struct ieee80211_tim_ie {
+	u_int8_t	tim_ie;			/* IEEE80211_ELEMID_TIM */
+	u_int8_t	tim_len;
+	u_int8_t	tim_count;		/* DTIM count */
+	u_int8_t	tim_period;		/* DTIM period */
+	u_int8_t	tim_bitctl;		/* bitmap control */
+	u_int8_t	tim_bitmap[1];		/* variable-length bitmap */
+} __packed;
+
+struct ieee80211_country_ie {
+	u_int8_t	ie;			/* IEEE80211_ELEMID_COUNTRY */
+	u_int8_t	len;
+	u_int8_t	cc[3];			/* ISO CC+(I)ndoor/(O)utdoor */
+	struct {
+		u_int8_t schan;			/* starting channel */
+		u_int8_t nchan;			/* number channels */
+		u_int8_t maxtxpwr;		/* tx power cap */
+	} __packed band[4];			/* up to 4 sub bands */
+} __packed;
+
+#define IEEE80211_CHALLENGE_LEN		128
+
+#define IEEE80211_SUPPCHAN_LEN		26
+
+#define	IEEE80211_RATE_BASIC		0x80
+#define	IEEE80211_RATE_VAL		0x7f
+
+/* EPR information element flags */
+#define	IEEE80211_ERP_NON_ERP_PRESENT	0x01
+#define	IEEE80211_ERP_USE_PROTECTION	0x02
+#define	IEEE80211_ERP_LONG_PREAMBLE	0x04
+
+/* Atheros private advanced capabilities info */
+#define	ATHEROS_CAP_TURBO_PRIME		0x01
+#define	ATHEROS_CAP_COMPRESSION		0x02
+#define	ATHEROS_CAP_FAST_FRAME		0x04
+/* bits 3-6 reserved */
+#define	ATHEROS_CAP_BOOST		0x80
+
+#define	ATH_OUI			0x7f0300		/* Atheros OUI */
+#define	ATH_OUI_TYPE		0x01
+#define	ATH_OUI_SUBTYPE		0x01
+#define	ATH_OUI_VERSION		0x00
+#define	ATH_OUI_TYPE_XR		0x03
+#define	ATH_OUI_SUBTYPE_XR	0x01
+#define	ATH_OUI_VER_XR		0x00
+
+#define	WPA_OUI			0xf25000
+#define	WPA_OUI_TYPE		0x01
+#define	WPA_VERSION		1		/* current supported version */
+
+#define	WPA_CSE_NULL		0x00
+#define	WPA_CSE_WEP40		0x01
+#define	WPA_CSE_TKIP		0x02
+#define	WPA_CSE_CCMP		0x04
+#define	WPA_CSE_WEP104		0x05
+
+#define	WPA_ASE_NONE		0x00
+#define	WPA_ASE_8021X_UNSPEC	0x01
+#define	WPA_ASE_8021X_PSK	0x02
+
+#define	RSN_OUI			0xac0f00
+#define	RSN_VERSION		1		/* current supported version */
+
+#define	RSN_CSE_NULL		0x00
+#define	RSN_CSE_WEP40		0x01
+#define	RSN_CSE_TKIP		0x02
+#define	RSN_CSE_WRAP		0x03
+#define	RSN_CSE_CCMP		0x04
+#define	RSN_CSE_WEP104		0x05
+
+#define	RSN_ASE_NONE		0x00
+#define	RSN_ASE_8021X_UNSPEC	0x01
+#define	RSN_ASE_8021X_PSK	0x02
+
+#define	RSN_CAP_PREAUTH		0x01
+
+#define	WME_OUI			0xf25000
+#define	WME_OUI_TYPE		0x02
+#define	WME_INFO_OUI_SUBTYPE	0x00
+#define	WME_PARAM_OUI_SUBTYPE	0x01
+#define	WME_VERSION		1
+
+/* WME stream classes */
+#define	WME_AC_BE	0		/* best effort */
+#define	WME_AC_BK	1		/* background */
+#define	WME_AC_VI	2		/* video */
+#define	WME_AC_VO	3		/* voice */
+
+/*
+ * AUTH management packets
+ *
+ *	octet algo[2]
+ *	octet seq[2]
+ *	octet status[2]
+ *	octet chal.id
+ *	octet chal.length
+ *	octet chal.text[253]
+ */
+
+typedef u_int8_t *ieee80211_mgt_auth_t;
+
+#define	IEEE80211_AUTH_ALGORITHM(auth) \
+	((auth)[0] | ((auth)[1] << 8))
+#define	IEEE80211_AUTH_TRANSACTION(auth) \
+	((auth)[2] | ((auth)[3] << 8))
+#define	IEEE80211_AUTH_STATUS(auth) \
+	((auth)[4] | ((auth)[5] << 8))
+
+#define	IEEE80211_AUTH_ALG_OPEN		0x0000
+#define	IEEE80211_AUTH_ALG_SHARED	0x0001
+#define	IEEE80211_AUTH_ALG_LEAP		0x0080
+
+enum {
+	IEEE80211_AUTH_OPEN_REQUEST		= 1,
+	IEEE80211_AUTH_OPEN_RESPONSE		= 2,
+};
+
+enum {
+	IEEE80211_AUTH_SHARED_REQUEST		= 1,
+	IEEE80211_AUTH_SHARED_CHALLENGE		= 2,
+	IEEE80211_AUTH_SHARED_RESPONSE		= 3,
+	IEEE80211_AUTH_SHARED_PASS		= 4,
+};
+
+/*
+ * Reason codes
+ *
+ * Unlisted codes are reserved
+ */
+
+enum {
+	IEEE80211_REASON_UNSPECIFIED		= 1,
+	IEEE80211_REASON_AUTH_EXPIRE		= 2,
+	IEEE80211_REASON_AUTH_LEAVE		= 3,
+	IEEE80211_REASON_ASSOC_EXPIRE		= 4,
+	IEEE80211_REASON_ASSOC_TOOMANY		= 5,
+	IEEE80211_REASON_NOT_AUTHED		= 6,
+	IEEE80211_REASON_NOT_ASSOCED		= 7,
+	IEEE80211_REASON_ASSOC_LEAVE		= 8,
+	IEEE80211_REASON_ASSOC_NOT_AUTHED	= 9,
+
+	IEEE80211_REASON_PWRCAP_UNACCEPTABLE	= 10,
+	IEEE80211_REASON_SUPPCHAN_UNACCEPTABLE	= 11,
+	IEEE80211_REASON_RSN_REQUIRED		= 11,
+	IEEE80211_REASON_RSN_INCONSISTENT	= 12,
+	IEEE80211_REASON_IE_INVALID		= 13,
+	IEEE80211_REASON_MIC_FAILURE		= 14,
+
+	IEEE80211_STATUS_SUCCESS		= 0,
+	IEEE80211_STATUS_UNSPECIFIED		= 1,
+	IEEE80211_STATUS_CAPINFO		= 10,
+	IEEE80211_STATUS_NOT_ASSOCED		= 11,
+	IEEE80211_STATUS_OTHER			= 12,
+	IEEE80211_STATUS_ALG			= 13,
+	IEEE80211_STATUS_SEQUENCE		= 14,
+	IEEE80211_STATUS_CHALLENGE		= 15,
+	IEEE80211_STATUS_TIMEOUT		= 16,
+	IEEE80211_STATUS_TOOMANY		= 17,
+	IEEE80211_STATUS_BASIC_RATE		= 18,
+	IEEE80211_STATUS_SP_REQUIRED		= 19,
+	IEEE80211_STATUS_PBCC_REQUIRED		= 20,
+	IEEE80211_STATUS_CA_REQUIRED		= 21,
+	IEEE80211_STATUS_SM_REQUIRED		= 22,
+	IEEE80211_STATUS_PWRCAP_UNACCEPTABLE	= 23,
+	IEEE80211_STATUS_SUPPCHAN_UNACCEPTABLE	= 24,
+	IEEE80211_STATUS_TOO_MANY_STATIONS	= 22,
+	IEEE80211_STATUS_RATES			= 23,
+	IEEE80211_STATUS_SHORTSLOT_REQUIRED	= 25,
+	IEEE80211_STATUS_DSSSOFDM_REQUIRED	= 26,
+};
+
+#define	IEEE80211_WEP_KEYLEN		5	/* 40bit */
+#define	IEEE80211_WEP_IVLEN		3	/* 24bit */
+#define	IEEE80211_WEP_KIDLEN		1	/* 1 octet */
+#define	IEEE80211_WEP_CRCLEN		4	/* CRC-32 */
+#define	IEEE80211_WEP_NKID		4	/* number of key ids */
+
+/*
+ * 802.11i defines an extended IV for use with non-WEP ciphers.
+ * When the EXTIV bit is set in the key id byte an additional
+ * 4 bytes immediately follow the IV for TKIP.  For CCMP the
+ * EXTIV bit is likewise set but the 8 bytes represent the
+ * CCMP header rather than IV+extended-IV.
+ */
+#define	IEEE80211_WEP_EXTIV		0x20
+#define	IEEE80211_WEP_EXTIVLEN		4	/* extended IV length */
+#define	IEEE80211_WEP_MICLEN		8	/* trailing MIC */
+
+#define	IEEE80211_CRC_LEN		4
+
+/*
+ * Maximum acceptable MTU is:
+ *	IEEE80211_MAX_LEN - WEP overhead - CRC -
+ *		QoS overhead - RSN/WPA overhead
+ * Min is arbitrarily chosen > IEEE80211_MIN_LEN.  The default
+ * mtu is Ethernet-compatible; it's set by ether_ifattach.
+ */
+#define	IEEE80211_MTU_MAX		2290
+#define	IEEE80211_MTU_MIN		32
+
+#define	IEEE80211_MAX_LEN		(2300 + IEEE80211_CRC_LEN + \
+	(IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN))
+#define	IEEE80211_ACK_LEN \
+	(sizeof(struct ieee80211_frame_ack) + IEEE80211_CRC_LEN)
+#define	IEEE80211_MIN_LEN \
+	(sizeof(struct ieee80211_frame_min) + IEEE80211_CRC_LEN)
+
+/*
+ * The 802.11 spec says at most 2007 stations may be
+ * associated at once.  For most APs this is way more
+ * than is feasible so we use a default of 128.  This
+ * number may be overridden by the driver and/or by
+ * user configuration.
+ */
+#define	IEEE80211_AID_MAX		2007
+#define	IEEE80211_AID_DEF		128
+
+#define	IEEE80211_AID(b)	((b) &~ 0xc000)
+
+/* 
+ * RTS frame length parameters.  The default is specified in
+ * the 802.11 spec.  The max may be wrong for jumbo frames.
+ */
+#define	IEEE80211_RTS_DEFAULT		512
+#define	IEEE80211_RTS_MIN		1
+#define	IEEE80211_RTS_MAX		2346
+
+/* 
+ * Regulatory extension identifier for country IE.
+ */
+#define IEEE80211_REG_EXT_ID		201
+
+/*
+ * IEEE 802.11 timer synchronization function (TSF) timestamp length
+ */
+#define IEEE80211_TSF_LEN		8
+
+#endif /* _NET80211_IEEE80211_H_ */
diff --git a/package/network/services/hostapd/madwifi/net80211/ieee80211_crypto.h b/package/network/services/hostapd/madwifi/net80211/ieee80211_crypto.h
new file mode 100644
index 0000000..b34f359
--- /dev/null
+++ b/package/network/services/hostapd/madwifi/net80211/ieee80211_crypto.h
@@ -0,0 +1,207 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $Id: ieee80211_crypto.h 3068 2007-12-21 17:46:02Z mentor $
+ */
+#ifndef _NET80211_IEEE80211_CRYPTO_H_
+#define _NET80211_IEEE80211_CRYPTO_H_
+
+/*
+ * 802.11 protocol crypto-related definitions.
+ */
+#define	IEEE80211_KEYBUF_SIZE	16
+#define	IEEE80211_MICBUF_SIZE	(8 + 8)		/* space for both TX & RX keys */
+#define IEEE80211_TID_SIZE	17		/* total number of TIDs */
+
+/*
+ * Old WEP-style key.  Deprecated.
+ */
+struct ieee80211_wepkey {
+	u_int wk_len;				/* key length in bytes */
+	u_int8_t wk_key[IEEE80211_KEYBUF_SIZE];
+};
+
+struct ieee80211_cipher;
+
+/*
+ * Crypto key state.  There is sufficient room for all supported
+ * ciphers (see below).  The underlying ciphers are handled
+ * separately through loadable cipher modules that register with
+ * the generic crypto support.  A key has a reference to an instance
+ * of the cipher; any per-key state is hung off wk_private by the
+ * cipher when it is attached.  Ciphers are automatically called
+ * to detach and cleanup any such state when the key is deleted.
+ *
+ * The generic crypto support handles encap/decap of cipher-related
+ * frame contents for both hardware- and software-based implementations.
+ * A key requiring software crypto support is automatically flagged and
+ * the cipher is expected to honor this and do the necessary work.
+ * Ciphers such as TKIP may also support mixed hardware/software
+ * encrypt/decrypt and MIC processing.
+ */
+
+typedef u_int16_t ieee80211_keyix_t;
+
+/* XXX pack better? */
+/* XXX 48-bit rsc/tsc */
+struct ieee80211_key {
+	u_int8_t wk_keylen;		/* key length in bytes */
+	u_int8_t wk_flags;
+#define	IEEE80211_KEY_XMIT	0x01	/* key used for xmit */
+#define	IEEE80211_KEY_RECV	0x02	/* key used for recv */
+#define	IEEE80211_KEY_GROUP	0x04	/* key used for WPA group operation */
+#define	IEEE80211_KEY_SWCRYPT	0x10	/* host-based encrypt/decrypt */
+#define	IEEE80211_KEY_SWMIC	0x20	/* host-based enmic/demic */
+	ieee80211_keyix_t wk_keyix;	/* key index */
+	u_int8_t wk_key[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
+#define	wk_txmic	wk_key+IEEE80211_KEYBUF_SIZE+0	/* XXX can't () right */
+#define	wk_rxmic	wk_key+IEEE80211_KEYBUF_SIZE+8	/* XXX can't () right */
+	u_int64_t wk_keyrsc[IEEE80211_TID_SIZE];	/* key receive sequence counter */
+	u_int64_t wk_keytsc;		/* key transmit sequence counter */
+	const struct ieee80211_cipher *wk_cipher;
+	void *wk_private;		/* private cipher state */
+};
+#define	IEEE80211_KEY_COMMON 		/* common flags passed in by apps */\
+	(IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV | IEEE80211_KEY_GROUP)
+
+/*
+ * NB: these values are ordered carefully; there are lots of
+ * of implications in any reordering.  In particular beware
+ * that 4 is not used to avoid conflicting with IEEE80211_F_PRIVACY.
+ */
+#define	IEEE80211_CIPHER_WEP		0
+#define	IEEE80211_CIPHER_TKIP		1
+#define	IEEE80211_CIPHER_AES_OCB	2
+#define	IEEE80211_CIPHER_AES_CCM	3
+#define	IEEE80211_CIPHER_CKIP		5
+#define	IEEE80211_CIPHER_NONE		6	/* pseudo value */
+
+#define	IEEE80211_CIPHER_MAX		(IEEE80211_CIPHER_NONE + 1)
+
+#define	IEEE80211_KEYIX_NONE	((ieee80211_keyix_t)-1)
+
+#if defined(__KERNEL__) || defined(_KERNEL)
+
+struct ieee80211com;
+struct ieee80211vap;
+struct ieee80211_node;
+struct sk_buff;
+
+void ieee80211_crypto_attach(struct ieee80211com *);
+void ieee80211_crypto_detach(struct ieee80211com *);
+void ieee80211_crypto_vattach(struct ieee80211vap *);
+void ieee80211_crypto_vdetach(struct ieee80211vap *);
+int ieee80211_crypto_newkey(struct ieee80211vap *, int, int,
+	struct ieee80211_key *);
+int ieee80211_crypto_delkey(struct ieee80211vap *, struct ieee80211_key *,
+	struct ieee80211_node *);
+int ieee80211_crypto_setkey(struct ieee80211vap *, struct ieee80211_key *,
+	const u_int8_t macaddr[IEEE80211_ADDR_LEN], struct ieee80211_node *);
+void ieee80211_crypto_delglobalkeys(struct ieee80211vap *);
+
+/*
+ * Template for a supported cipher.  Ciphers register with the
+ * crypto code and are typically loaded as separate modules
+ * (the null cipher is always present).
+ * XXX may need refcnts
+ */
+struct ieee80211_cipher {
+	const char *ic_name;		/* printable name */
+	u_int ic_cipher;		/* IEEE80211_CIPHER_* */
+	u_int ic_header;		/* size of privacy header (bytes) */
+	u_int ic_trailer;		/* size of privacy trailer (bytes) */
+	u_int ic_miclen;		/* size of mic trailer (bytes) */
+	void *(*ic_attach)(struct ieee80211vap *, struct ieee80211_key *);
+	void (*ic_detach)(struct ieee80211_key *);
+	int (*ic_setkey)(struct ieee80211_key *);
+	int (*ic_encap)(struct ieee80211_key *, struct sk_buff *, u_int8_t);
+	int (*ic_decap)(struct ieee80211_key *, struct sk_buff *, int);
+	int (*ic_enmic)(struct ieee80211_key *, struct sk_buff *, int);
+	int (*ic_demic)(struct ieee80211_key *, struct sk_buff *, int, int);
+};
+extern const struct ieee80211_cipher ieee80211_cipher_none;
+
+void ieee80211_crypto_register(const struct ieee80211_cipher *);
+void ieee80211_crypto_unregister(const struct ieee80211_cipher *);
+int ieee80211_crypto_available(struct ieee80211vap*, u_int);
+
+struct ieee80211_key *ieee80211_crypto_encap(struct ieee80211_node *,
+	struct sk_buff *);
+struct ieee80211_key *ieee80211_crypto_decap(struct ieee80211_node *,
+	struct sk_buff *, int);
+
+/*
+ * Check and remove any MIC.
+ */
+static __inline int
+ieee80211_crypto_demic(struct ieee80211vap *vap, struct ieee80211_key *k,
+	struct sk_buff *skb, int hdrlen, int force)
+{
+	const struct ieee80211_cipher *cip = k->wk_cipher;
+	return (cip->ic_miclen > 0 ? cip->ic_demic(k, skb, hdrlen, force) : 1);
+}
+
+/*
+ * Add any MIC.
+ */
+static __inline int
+ieee80211_crypto_enmic(struct ieee80211vap *vap, struct ieee80211_key *k,
+	struct sk_buff *skb, int force)
+{
+	const struct ieee80211_cipher *cip = k->wk_cipher;
+	return (cip->ic_miclen > 0 ? cip->ic_enmic(k, skb, force) : 1);
+}
+
+/* 
+ * Reset key state to an unused state.  The crypto
+ * key allocation mechanism ensures other state (e.g.
+ * key data) is properly setup before a key is used.
+ */
+static __inline void
+ieee80211_crypto_resetkey(struct ieee80211vap *vap, struct ieee80211_key *k,
+	ieee80211_keyix_t ix)
+{
+	k->wk_cipher = &ieee80211_cipher_none;;
+	k->wk_private = k->wk_cipher->ic_attach(vap, k);
+	k->wk_keyix = ix;
+	k->wk_flags = IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV;
+}
+
+/*
+ * Crypto-related notification methods.
+ */
+void ieee80211_notify_replay_failure(struct ieee80211vap *,
+	const struct ieee80211_frame *, const struct ieee80211_key *,
+	u_int64_t rsc);
+void ieee80211_notify_michael_failure(struct ieee80211vap *,
+	const struct ieee80211_frame *, ieee80211_keyix_t keyix);
+#endif /* defined(__KERNEL__) || defined(_KERNEL) */
+#endif /* _NET80211_IEEE80211_CRYPTO_H_ */
diff --git a/package/network/services/hostapd/madwifi/net80211/ieee80211_ioctl.h b/package/network/services/hostapd/madwifi/net80211/ieee80211_ioctl.h
new file mode 100644
index 0000000..204303b
--- /dev/null
+++ b/package/network/services/hostapd/madwifi/net80211/ieee80211_ioctl.h
@@ -0,0 +1,715 @@
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $Id: ieee80211_ioctl.h 3314 2008-01-30 23:50:16Z mtaylor $
+ */
+#ifndef _NET80211_IEEE80211_IOCTL_H_
+#define _NET80211_IEEE80211_IOCTL_H_
+
+/*
+ * IEEE 802.11 ioctls.
+ */
+#include <net80211/_ieee80211.h>
+#include <net80211/ieee80211.h>
+#include <net80211/ieee80211_crypto.h>
+
+/*
+ * Per/node (station) statistics available when operating as an AP.
+ */
+struct ieee80211_nodestats {
+	u_int32_t ns_rx_data;		/* rx data frames */
+	u_int32_t ns_rx_mgmt;		/* rx management frames */
+	u_int32_t ns_rx_ctrl;		/* rx control frames */
+	u_int32_t ns_rx_ucast;		/* rx unicast frames */
+	u_int32_t ns_rx_mcast;		/* rx multi/broadcast frames */
+	u_int64_t ns_rx_bytes;		/* rx data count (bytes) */
+	u_int64_t ns_rx_beacons;		/* rx beacon frames */
+	u_int32_t ns_rx_proberesp;	/* rx probe response frames */
+
+	u_int32_t ns_rx_dup;		/* rx discard because it's a dup */
+	u_int32_t ns_rx_noprivacy;	/* rx w/ wep but privacy off */
+	u_int32_t ns_rx_wepfail;		/* rx wep processing failed */
+	u_int32_t ns_rx_demicfail;	/* rx demic failed */
+	u_int32_t ns_rx_decap;		/* rx decapsulation failed */
+	u_int32_t ns_rx_defrag;		/* rx defragmentation failed */
+	u_int32_t ns_rx_disassoc;	/* rx disassociation */
+	u_int32_t ns_rx_deauth;		/* rx deauthentication */
+	u_int32_t ns_rx_decryptcrc;	/* rx decrypt failed on crc */
+	u_int32_t ns_rx_unauth;		/* rx on unauthorized port */
+	u_int32_t ns_rx_unencrypted;	/* rx unecrypted w/ privacy */
+
+	u_int32_t ns_tx_data;		/* tx data frames */
+	u_int32_t ns_tx_mgmt;		/* tx management frames */
+	u_int32_t ns_tx_ucast;		/* tx unicast frames */
+	u_int32_t ns_tx_mcast;		/* tx multi/broadcast frames */
+	u_int64_t ns_tx_bytes;		/* tx data count (bytes) */
+	u_int32_t ns_tx_probereq;	/* tx probe request frames */
+	u_int32_t ns_tx_uapsd;		/* tx on uapsd queue */
+
+	u_int32_t ns_tx_novlantag;	/* tx discard due to no tag */
+	u_int32_t ns_tx_vlanmismatch;	/* tx discard due to of bad tag */
+
+	u_int32_t ns_tx_eosplost;	/* uapsd EOSP retried out */
+
+	u_int32_t ns_ps_discard;		/* ps discard due to of age */
+
+	u_int32_t ns_uapsd_triggers;	/* uapsd triggers */
+
+	/* MIB-related state */
+	u_int32_t ns_tx_assoc;		/* [re]associations */
+	u_int32_t ns_tx_assoc_fail;	/* [re]association failures */
+	u_int32_t ns_tx_auth;		/* [re]authentications */
+	u_int32_t ns_tx_auth_fail;	/* [re]authentication failures*/
+	u_int32_t ns_tx_deauth;		/* deauthentications */
+	u_int32_t ns_tx_deauth_code;	/* last deauth reason */
+	u_int32_t ns_tx_disassoc;	/* disassociations */
+	u_int32_t ns_tx_disassoc_code;	/* last disassociation reason */
+	u_int32_t ns_psq_drops;		/* power save queue drops */
+};
+
+/*
+ * Summary statistics.
+ */
+struct ieee80211_stats {
+	u_int32_t is_rx_badversion;	/* rx frame with bad version */
+	u_int32_t is_rx_tooshort;	/* rx frame too short */
+	u_int32_t is_rx_wrongbss;	/* rx from wrong bssid */
+	u_int32_t is_rx_dup;		/* rx discard due to it's a dup */
+	u_int32_t is_rx_wrongdir;	/* rx w/ wrong direction */
+	u_int32_t is_rx_mcastecho;	/* rx discard due to of mcast echo */
+	u_int32_t is_rx_mcastdisabled;	/* rx discard due to of mcast disabled */
+	u_int32_t is_rx_notassoc;	/* rx discard due to sta !assoc */
+	u_int32_t is_rx_noprivacy;	/* rx w/ wep but privacy off */
+	u_int32_t is_rx_unencrypted;	/* rx w/o wep and privacy on */
+	u_int32_t is_rx_wepfail;		/* rx wep processing failed */
+	u_int32_t is_rx_decap;		/* rx decapsulation failed */
+	u_int32_t is_rx_mgtdiscard;	/* rx discard mgt frames */
+	u_int32_t is_rx_ctl;		/* rx discard ctrl frames */
+	u_int32_t is_rx_beacon;		/* rx beacon frames */
+	u_int32_t is_rx_rstoobig;	/* rx rate set truncated */
+	u_int32_t is_rx_elem_missing;	/* rx required element missing*/
+	u_int32_t is_rx_elem_toobig;	/* rx element too big */
+	u_int32_t is_rx_elem_toosmall;	/* rx element too small */
+	u_int32_t is_rx_elem_unknown;	/* rx element unknown */
+	u_int32_t is_rx_badchan;		/* rx frame w/ invalid chan */
+	u_int32_t is_rx_chanmismatch;	/* rx frame chan mismatch */
+	u_int32_t is_rx_nodealloc;	/* rx frame dropped */
+	u_int32_t is_rx_ssidmismatch;	/* rx frame ssid mismatch  */
+	u_int32_t is_rx_auth_unsupported;/* rx w/ unsupported auth alg */
+	u_int32_t is_rx_auth_fail;	/* rx sta auth failure */
+	u_int32_t is_rx_auth_countermeasures;/* rx auth discard due to CM */
+	u_int32_t is_rx_assoc_bss;	/* rx assoc from wrong bssid */
+	u_int32_t is_rx_assoc_notauth;	/* rx assoc w/o auth */
+	u_int32_t is_rx_assoc_capmismatch;/* rx assoc w/ cap mismatch */
+	u_int32_t is_rx_assoc_norate;	/* rx assoc w/ no rate match */
+	u_int32_t is_rx_assoc_badwpaie;	/* rx assoc w/ bad WPA IE */
+	u_int32_t is_rx_assoc_badscie;	/* rx assoc w/ bad SC IE */
+	u_int32_t is_rx_deauth;		/* rx deauthentication */
+	u_int32_t is_rx_disassoc;	/* rx disassociation */
+	u_int32_t is_rx_badsubtype;	/* rx frame w/ unknown subtype*/
+	u_int32_t is_rx_nobuf;		/* rx failed for lack of buf */
+	u_int32_t is_rx_decryptcrc;	/* rx decrypt failed on crc */
+	u_int32_t is_rx_ahdemo_mgt;	/* rx discard ahdemo mgt frame*/
+	u_int32_t is_rx_bad_auth;	/* rx bad auth request */
+	u_int32_t is_rx_unauth;		/* rx on unauthorized port */
+	u_int32_t is_rx_badkeyid;	/* rx w/ incorrect keyid */
+	u_int32_t is_rx_ccmpreplay;	/* rx seq# violation (CCMP) */
+	u_int32_t is_rx_ccmpformat;	/* rx format bad (CCMP) */
+	u_int32_t is_rx_ccmpmic;		/* rx MIC check failed (CCMP) */
+	u_int32_t is_rx_tkipreplay;	/* rx seq# violation (TKIP) */
+	u_int32_t is_rx_tkipformat;	/* rx format bad (TKIP) */
+	u_int32_t is_rx_tkipmic;		/* rx MIC check failed (TKIP) */
+	u_int32_t is_rx_tkipicv;		/* rx ICV check failed (TKIP) */
+	u_int32_t is_rx_badcipher;	/* rx failed due to of key type */
+	u_int32_t is_rx_nocipherctx;	/* rx failed due to key !setup */
+	u_int32_t is_rx_acl;		/* rx discard due to of acl policy */
+	u_int32_t is_rx_ffcnt;		/* rx fast frames */
+	u_int32_t is_rx_badathtnl;   	/* driver key alloc failed */
+	u_int32_t is_tx_nobuf;		/* tx failed for lack of buf */
+	u_int32_t is_tx_nonode;		/* tx failed for no node */
+	u_int32_t is_tx_unknownmgt;	/* tx of unknown mgt frame */
+	u_int32_t is_tx_badcipher;	/* tx failed due to of key type */
+	u_int32_t is_tx_nodefkey;	/* tx failed due to no defkey */
+	u_int32_t is_tx_noheadroom;	/* tx failed due to no space */
+	u_int32_t is_tx_ffokcnt;		/* tx fast frames sent success */
+	u_int32_t is_tx_fferrcnt;	/* tx fast frames sent success */
+	u_int32_t is_scan_active;	/* active scans started */
+	u_int32_t is_scan_passive;	/* passive scans started */
+	u_int32_t is_node_timeout;	/* nodes timed out inactivity */
+	u_int32_t is_node_fdisassoc;	/* forced node disassociation */
+	u_int32_t is_crypto_nomem;	/* no memory for crypto ctx */
+	u_int32_t is_crypto_tkip;	/* tkip crypto done in s/w */
+	u_int32_t is_crypto_tkipenmic;	/* tkip en-MIC done in s/w */
+	u_int32_t is_crypto_tkipdemic;	/* tkip de-MIC done in s/w */
+	u_int32_t is_crypto_tkipcm;	/* tkip counter measures */
+	u_int32_t is_crypto_ccmp;	/* ccmp crypto done in s/w */
+	u_int32_t is_crypto_wep;		/* wep crypto done in s/w */
+	u_int32_t is_crypto_setkey_cipher;/* cipher rejected key */
+	u_int32_t is_crypto_setkey_nokey;/* no key index for setkey */
+	u_int32_t is_crypto_delkey;	/* driver key delete failed */
+	u_int32_t is_crypto_badcipher;	/* unknown cipher */
+	u_int32_t is_crypto_nocipher;	/* cipher not available */
+	u_int32_t is_crypto_attachfail;	/* cipher attach failed */
+	u_int32_t is_crypto_swfallback;	/* cipher fallback to s/w */
+	u_int32_t is_crypto_keyfail;	/* driver key alloc failed */
+	u_int32_t is_crypto_enmicfail;	/* en-MIC failed */
+	u_int32_t is_ibss_capmismatch;	/* merge failed-cap mismatch */
+	u_int32_t is_ibss_norate;	/* merge failed-rate mismatch */
+	u_int32_t is_ps_unassoc;		/* ps-poll for unassoc. sta */
+	u_int32_t is_ps_badaid;		/* ps-poll w/ incorrect aid */
+	u_int32_t is_ps_qempty;		/* ps-poll w/ nothing to send */
+};
+
+/*
+ * Max size of optional information elements.  We artificially
+ * constrain this; it's limited only by the max frame size (and
+ * the max parameter size of the wireless extensions).
+ */
+#define	IEEE80211_MAX_OPT_IE	256
+
+/*
+ * WPA/RSN get/set key request.  Specify the key/cipher
+ * type and whether the key is to be used for sending and/or
+ * receiving.  The key index should be set only when working
+ * with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
+ * Otherwise a unicast/pairwise key is specified by the bssid
+ * (on a station) or mac address (on an ap).  They key length
+ * must include any MIC key data; otherwise it should be no
+ more than IEEE80211_KEYBUF_SIZE.
+ */
+struct ieee80211req_key {
+	u_int8_t ik_type;		/* key/cipher type */
+	u_int8_t ik_pad;
+	ieee80211_keyix_t ik_keyix;	/* key index */
+	u_int8_t ik_keylen;		/* key length in bytes */
+	u_int8_t ik_flags;
+/* NB: IEEE80211_KEY_XMIT and IEEE80211_KEY_RECV defined elsewhere */
+#define	IEEE80211_KEY_DEFAULT	0x80	/* default xmit key */
+	u_int8_t ik_macaddr[IEEE80211_ADDR_LEN];
+	u_int64_t ik_keyrsc;		/* key receive sequence counter */
+	u_int64_t ik_keytsc;		/* key transmit sequence counter */
+	u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
+};
+
+/*
+ * Delete a key either by index or address.  Set the index
+ * to IEEE80211_KEYIX_NONE when deleting a unicast key.
+ */
+struct ieee80211req_del_key {
+	/* NB: This is different to ieee80211_keyix_t, but this is OK as 
+	 * values are unique over the low order bits. */
+	u_int8_t idk_keyix;	/* key index */
+	u_int8_t idk_macaddr[IEEE80211_ADDR_LEN];
+};
+
+/*
+ * MLME state manipulation request.  IEEE80211_MLME_ASSOC
+ * only makes sense when operating as a station.  The other
+ * requests can be used when operating as a station or an
+ * ap (to effect a station).
+ */
+struct ieee80211req_mlme {
+	u_int8_t im_op;			/* operation to perform */
+#define	IEEE80211_MLME_ASSOC		1	/* associate station */
+#define	IEEE80211_MLME_DISASSOC		2	/* disassociate station */
+#define	IEEE80211_MLME_DEAUTH		3	/* deauthenticate station */
+#define	IEEE80211_MLME_AUTHORIZE	4	/* authorize station */
+#define	IEEE80211_MLME_UNAUTHORIZE	5	/* unauthorize station */
+#define IEEE80211_MLME_CLEAR_STATS	6	/* clear station statistic */
+	u_int8_t im_ssid_len;		/* length of optional ssid */
+	u_int16_t im_reason;		/* 802.11 reason code */
+	u_int8_t im_macaddr[IEEE80211_ADDR_LEN];
+	u_int8_t im_ssid[IEEE80211_NWID_LEN];
+};
+
+/* 
+ * MAC ACL operations.
+ */
+enum {
+	IEEE80211_MACCMD_POLICY_OPEN	= 0,	/* set policy: no ACLs */
+	IEEE80211_MACCMD_POLICY_ALLOW	= 1,	/* set policy: allow traffic */
+	IEEE80211_MACCMD_POLICY_DENY	= 2,	/* set policy: deny traffic */
+	IEEE80211_MACCMD_FLUSH		= 3,	/* flush ACL database */
+	IEEE80211_MACCMD_DETACH		= 4,	/* detach ACL policy */
+};
+
+/*
+ * Set the active channel list.  Note this list is
+ * intersected with the available channel list in
+ * calculating the set of channels actually used in
+ * scanning.
+ */
+struct ieee80211req_chanlist {
+	u_int8_t ic_channels[IEEE80211_CHAN_BYTES];
+};
+
+/*
+ * Get the active channel list info.
+ */
+struct ieee80211req_chaninfo {
+	u_int ic_nchans;
+	struct ieee80211_channel ic_chans[IEEE80211_CHAN_MAX];
+};
+
+/*
+ * Retrieve the WPA/RSN information element for an associated station.
+ */
+struct ieee80211req_wpaie {
+	u_int8_t	wpa_macaddr[IEEE80211_ADDR_LEN];
+	u_int8_t	wpa_ie[IEEE80211_MAX_OPT_IE];
+	u_int8_t	rsn_ie[IEEE80211_MAX_OPT_IE];
+};
+
+/*
+ * Retrieve per-node statistics.
+ */
+struct ieee80211req_sta_stats {
+	union {
+		/* NB: explicitly force 64-bit alignment */
+		u_int8_t macaddr[IEEE80211_ADDR_LEN];
+		u_int64_t pad;
+	} is_u;
+	struct ieee80211_nodestats is_stats;
+};
+
+/*
+ * Station information block; the mac address is used
+ * to retrieve other data like stats, unicast key, etc.
+ */
+struct ieee80211req_sta_info {
+	u_int16_t isi_len;		/* length (mult of 4) */
+	u_int16_t isi_freq;		/* MHz */
+	u_int16_t isi_flags;		/* channel flags */
+	u_int16_t isi_state;		/* state flags */
+	u_int8_t isi_authmode;		/* authentication algorithm */
+	u_int8_t isi_rssi;
+	int8_t isi_noise;
+	u_int16_t isi_capinfo;		/* capabilities */
+	u_int8_t isi_athflags;		/* Atheros capabilities */
+	u_int8_t isi_erp;		/* ERP element */
+	u_int8_t isi_macaddr[IEEE80211_ADDR_LEN];
+	u_int8_t isi_nrates;		/* negotiated rates */
+	u_int8_t isi_rates[IEEE80211_RATE_MAXSIZE];
+	u_int8_t isi_txrate;		/* index to isi_rates[] */
+	u_int16_t isi_ie_len;		/* IE length */
+	u_int16_t isi_associd;		/* assoc response */
+	u_int16_t isi_txpower;		/* current tx power */
+	u_int16_t isi_vlan;		/* vlan tag */
+	u_int16_t isi_txseqs[17];	/* seq to be transmitted */
+	u_int16_t isi_rxseqs[17];	/* seq previous for qos frames*/
+	u_int16_t isi_inact;		/* inactivity timer */
+	u_int8_t isi_uapsd;		/* UAPSD queues */
+	u_int8_t isi_opmode;		/* sta operating mode */
+
+	/* XXX frag state? */
+	/* variable length IE data */
+};
+
+enum {
+	IEEE80211_STA_OPMODE_NORMAL,
+	IEEE80211_STA_OPMODE_XR
+};
+
+/*
+ * Retrieve per-station information; to retrieve all
+ * specify a mac address of ff:ff:ff:ff:ff:ff.
+ */
+struct ieee80211req_sta_req {
+	union {
+		/* NB: explicitly force 64-bit alignment */
+		u_int8_t macaddr[IEEE80211_ADDR_LEN];
+		u_int64_t pad;
+	} is_u;
+	struct ieee80211req_sta_info info[1];	/* variable length */
+};
+
+/*
+ * Get/set per-station tx power cap.
+ */
+struct ieee80211req_sta_txpow {
+	u_int8_t	it_macaddr[IEEE80211_ADDR_LEN];
+	u_int8_t	it_txpow;
+};
+
+/*
+ * WME parameters are set and return using i_val and i_len.
+ * i_val holds the value itself.  i_len specifies the AC
+ * and, as appropriate, then high bit specifies whether the
+ * operation is to be applied to the BSS or ourself.
+ */
+#define	IEEE80211_WMEPARAM_SELF	0x0000		/* parameter applies to self */
+#define	IEEE80211_WMEPARAM_BSS	0x8000		/* parameter applies to BSS */
+#define	IEEE80211_WMEPARAM_VAL	0x7fff		/* parameter value */
+
+/*
+ * Scan result data returned for IEEE80211_IOC_SCAN_RESULTS.
+ */
+struct ieee80211req_scan_result {
+	u_int16_t isr_len;		/* length (mult of 4) */
+	u_int16_t isr_freq;		/* MHz */
+	u_int16_t isr_flags;		/* channel flags */
+	u_int8_t isr_noise;
+	u_int8_t isr_rssi;
+	u_int8_t isr_intval;		/* beacon interval */
+	u_int16_t isr_capinfo;		/* capabilities */
+	u_int8_t isr_erp;		/* ERP element */
+	u_int8_t isr_bssid[IEEE80211_ADDR_LEN];
+	u_int8_t isr_nrates;
+	u_int8_t isr_rates[IEEE80211_RATE_MAXSIZE];
+	u_int8_t isr_ssid_len;		/* SSID length */
+	u_int8_t isr_ie_len;		/* IE length */
+	u_int8_t isr_pad[5];
+	/* variable length SSID followed by IE data */
+};
+
+#ifdef __FreeBSD__
+/*
+ * FreeBSD-style ioctls.
+ */
+/* the first member must be matched with struct ifreq */
+struct ieee80211req {
+	char i_name[IFNAMSIZ];	/* if_name, e.g. "wi0" */
+	u_int16_t i_type;	/* req type */
+	int16_t 	i_val;		/* Index or simple value */
+	int16_t 	i_len;		/* Index or simple value */
+	void *i_data;		/* Extra data */
+};
+#define	SIOCS80211		 _IOW('i', 234, struct ieee80211req)
+#define	SIOCG80211		_IOWR('i', 235, struct ieee80211req)
+#define	SIOCG80211STATS		_IOWR('i', 236, struct ifreq)
+#define	SIOC80211IFCREATE	_IOWR('i', 237, struct ifreq)
+#define	SIOC80211IFDESTROY	 _IOW('i', 238, struct ifreq)
+
+#define IEEE80211_IOC_SSID		1
+#define IEEE80211_IOC_NUMSSIDS		2
+#define IEEE80211_IOC_WEP		3
+#define 	IEEE80211_WEP_NOSUP		-1
+#define 	IEEE80211_WEP_OFF		0
+#define 	IEEE80211_WEP_ON		1
+#define 	IEEE80211_WEP_MIXED		2
+#define IEEE80211_IOC_WEPKEY		4
+#define IEEE80211_IOC_NUMWEPKEYS	5
+#define IEEE80211_IOC_WEPTXKEY		6
+#define IEEE80211_IOC_AUTHMODE		7
+#define IEEE80211_IOC_STATIONNAME	8
+#define IEEE80211_IOC_CHANNEL		9
+#define IEEE80211_IOC_POWERSAVE		10
+#define 	IEEE80211_POWERSAVE_NOSUP	-1
+#define 	IEEE80211_POWERSAVE_OFF		0
+#define 	IEEE80211_POWERSAVE_CAM		1
+#define 	IEEE80211_POWERSAVE_PSP		2
+#define 	IEEE80211_POWERSAVE_PSP_CAM	3
+#define 	IEEE80211_POWERSAVE_ON		IEEE80211_POWERSAVE_CAM
+#define IEEE80211_IOC_POWERSAVESLEEP	11
+#define	IEEE80211_IOC_RTSTHRESHOLD	12
+#define IEEE80211_IOC_PROTMODE		13
+#define 	IEEE80211_PROTMODE_OFF		0
+#define 	IEEE80211_PROTMODE_CTS		1
+#define 	IEEE80211_PROTMODE_RTSCTS	2
+#define	IEEE80211_IOC_TXPOWER		14	/* global tx power limit */
+#define	IEEE80211_IOC_BSSID		15
+#define	IEEE80211_IOC_ROAMING		16	/* roaming mode */
+#define	IEEE80211_IOC_PRIVACY		17	/* privacy invoked */
+#define	IEEE80211_IOC_DROPUNENCRYPTED	18	/* discard unencrypted frames */
+#define	IEEE80211_IOC_WPAKEY		19
+#define	IEEE80211_IOC_DELKEY		20
+#define	IEEE80211_IOC_MLME		21
+#define	IEEE80211_IOC_OPTIE		22	/* optional info. element */
+#define	IEEE80211_IOC_SCAN_REQ		23
+#define	IEEE80211_IOC_SCAN_RESULTS	24
+#define	IEEE80211_IOC_COUNTERMEASURES	25	/* WPA/TKIP countermeasures */
+#define	IEEE80211_IOC_WPA		26	/* WPA mode (0,1,2) */
+#define	IEEE80211_IOC_CHANLIST		27	/* channel list */
+#define	IEEE80211_IOC_WME		28	/* WME mode (on, off) */
+#define	IEEE80211_IOC_HIDESSID		29	/* hide SSID mode (on, off) */
+#define IEEE80211_IOC_APBRIDGE		30	/* AP inter-sta bridging */
+#define	IEEE80211_IOC_MCASTCIPHER	31	/* multicast/default cipher */
+#define	IEEE80211_IOC_MCASTKEYLEN	32	/* multicast key length */
+#define	IEEE80211_IOC_UCASTCIPHERS	33	/* unicast cipher suites */
+#define	IEEE80211_IOC_UCASTCIPHER	34	/* unicast cipher */
+#define	IEEE80211_IOC_UCASTKEYLEN	35	/* unicast key length */
+#define	IEEE80211_IOC_DRIVER_CAPS	36	/* driver capabilities */
+#define	IEEE80211_IOC_KEYMGTALGS	37	/* key management algorithms */
+#define	IEEE80211_IOC_RSNCAPS		38	/* RSN capabilities */
+#define	IEEE80211_IOC_WPAIE		39	/* WPA information element */
+#define	IEEE80211_IOC_STA_STATS		40	/* per-station statistics */
+#define	IEEE80211_IOC_MACCMD		41	/* MAC ACL operation */
+#define	IEEE80211_IOC_TXPOWMAX		43	/* max tx power for channel */
+#define	IEEE80211_IOC_STA_TXPOW		44	/* per-station tx power limit */
+#define	IEEE80211_IOC_STA_INFO		45	/* station/neighbor info */
+#define	IEEE80211_IOC_WME_CWMIN		46	/* WME: ECWmin */
+#define	IEEE80211_IOC_WME_CWMAX		47	/* WME: ECWmax */
+#define	IEEE80211_IOC_WME_AIFS		48	/* WME: AIFSN */
+#define	IEEE80211_IOC_WME_TXOPLIMIT	49	/* WME: txops limit */
+#define	IEEE80211_IOC_WME_ACM		50	/* WME: ACM (bss only) */
+#define	IEEE80211_IOC_WME_ACKPOLICY	51	/* WME: ACK policy (!bss only)*/
+#define	IEEE80211_IOC_DTIM_PERIOD	52	/* DTIM period (beacons) */
+#define	IEEE80211_IOC_BEACON_INTERVAL	53	/* beacon interval (ms) */
+#define	IEEE80211_IOC_ADDMAC		54	/* add sta to MAC ACL table */
+#define	IEEE80211_IOC_SETMAC		55	/* set interface wds mac addr */
+#define	IEEE80211_IOC_FF		56	/* ATH fast frames (on, off) */
+#define	IEEE80211_IOC_TURBOP		57	/* ATH turbo' (on, off) */
+#define	IEEE80211_IOC_APPIEBUF		58	/* IE in the management frame */
+#define	IEEE80211_IOC_FILTERFRAME	59	/* management frame filter */
+
+/*
+ * Scan result data returned for IEEE80211_IOC_SCAN_RESULTS.
+ */
+struct ieee80211req_scan_result {
+	u_int16_t isr_len;		/* length (mult of 4) */
+	u_int16_t isr_freq;		/* MHz */
+	u_int16_t isr_flags;		/* channel flags */
+	u_int8_t isr_noise;
+	u_int8_t isr_rssi;
+	u_int8_t isr_intval;		/* beacon interval */
+	u_int16_t isr_capinfo;		/* capabilities */
+	u_int8_t isr_erp;		/* ERP element */
+	u_int8_t isr_bssid[IEEE80211_ADDR_LEN];
+	u_int8_t isr_nrates;
+	u_int8_t isr_rates[IEEE80211_RATE_MAXSIZE];
+	u_int8_t isr_ssid_len;		/* SSID length */
+	u_int8_t isr_ie_len;		/* IE length */
+	u_int8_t isr_pad[5];
+	/* variable length SSID followed by IE data */
+};
+
+#endif /* __FreeBSD__ */
+
+#ifdef __linux__
+/*
+ * Wireless Extensions API, private ioctl interfaces.
+ *
+ * NB: Even-numbered ioctl numbers have set semantics and are privileged!
+ *     (regardless of the incorrect comment in wireless.h!)
+ */
+#ifdef __KERNEL__
+#include <linux/if.h>
+#endif
+/* The maximum size of a iwpriv structure is IW_PRIV_SIZE_MASK, which was 
+ * exceeded for some time by chaninfo ioctl.  These macros change the size 
+ * encoding for anything larger than IW_PRIV_SIZE_MASK from bytes to 4-byte
+ * multiples so that the padded size fits under IW_PRIV_SIZE_MASK. */
+#define IW_PRIV_BLOB_LENGTH_ENCODING(_SIZE) \
+	(((_SIZE) == ((_SIZE) & IW_PRIV_SIZE_MASK)) ? \
+		(_SIZE) : \
+		(((_SIZE) / sizeof(uint32_t)) + \
+			(((_SIZE) == (((_SIZE) / sizeof(uint32_t)) * sizeof(int))) ? \
+				0 : 1)))
+#define IW_PRIV_BLOB_TYPE_ENCODING(_SIZE) \
+	(((_SIZE) == ((_SIZE) & IW_PRIV_SIZE_MASK)) ? \
+		(IW_PRIV_TYPE_BYTE | (_SIZE)) : \
+		(IW_PRIV_TYPE_INT  | IW_PRIV_BLOB_LENGTH_ENCODING((_SIZE))))
+
+#define	IEEE80211_IOCTL_SETPARAM	(SIOCIWFIRSTPRIV+0)
+#define	IEEE80211_IOCTL_GETPARAM	(SIOCIWFIRSTPRIV+1)
+#define	IEEE80211_IOCTL_SETMODE		(SIOCIWFIRSTPRIV+2)
+#define	IEEE80211_IOCTL_GETMODE		(SIOCIWFIRSTPRIV+3)
+#define	IEEE80211_IOCTL_SETWMMPARAMS	(SIOCIWFIRSTPRIV+4)
+#define	IEEE80211_IOCTL_GETWMMPARAMS	(SIOCIWFIRSTPRIV+5)
+#define	IEEE80211_IOCTL_SETCHANLIST	(SIOCIWFIRSTPRIV+6)
+#define	IEEE80211_IOCTL_GETCHANLIST	(SIOCIWFIRSTPRIV+7)
+#define	IEEE80211_IOCTL_CHANSWITCH	(SIOCIWFIRSTPRIV+8)
+#define	IEEE80211_IOCTL_GET_APPIEBUF	(SIOCIWFIRSTPRIV+9)
+#define	IEEE80211_IOCTL_SET_APPIEBUF	(SIOCIWFIRSTPRIV+10)
+#define	IEEE80211_IOCTL_READREG		(SIOCIWFIRSTPRIV+11)
+#define	IEEE80211_IOCTL_FILTERFRAME	(SIOCIWFIRSTPRIV+12)
+#define	IEEE80211_IOCTL_GETCHANINFO	(SIOCIWFIRSTPRIV+13)
+#define	IEEE80211_IOCTL_SETOPTIE	(SIOCIWFIRSTPRIV+14)
+#define	IEEE80211_IOCTL_GETOPTIE	(SIOCIWFIRSTPRIV+15)
+#define	IEEE80211_IOCTL_SETMLME		(SIOCIWFIRSTPRIV+16)
+#define	IEEE80211_IOCTL_RADAR		(SIOCIWFIRSTPRIV+17)
+#define	IEEE80211_IOCTL_SETKEY		(SIOCIWFIRSTPRIV+18)
+#define	IEEE80211_IOCTL_WRITEREG	(SIOCIWFIRSTPRIV+19)
+#define	IEEE80211_IOCTL_DELKEY		(SIOCIWFIRSTPRIV+20)
+#define	IEEE80211_IOCTL_HALMAP		(SIOCIWFIRSTPRIV+21)
+#define	IEEE80211_IOCTL_ADDMAC		(SIOCIWFIRSTPRIV+22)
+#define	IEEE80211_IOCTL_DELMAC		(SIOCIWFIRSTPRIV+24)
+#define	IEEE80211_IOCTL_WDSADDMAC	(SIOCIWFIRSTPRIV+25)
+#define	IEEE80211_IOCTL_WDSSETMAC	(SIOCIWFIRSTPRIV+26)
+#define	IEEE80211_IOCTL_KICKMAC		(SIOCIWFIRSTPRIV+30)
+#define	IEEE80211_IOCTL_SETSCANLIST	(SIOCIWFIRSTPRIV+31)
+
+enum {
+	IEEE80211_WMMPARAMS_CWMIN       = 1,
+	IEEE80211_WMMPARAMS_CWMAX       = 2,
+	IEEE80211_WMMPARAMS_AIFS       	= 3,
+	IEEE80211_WMMPARAMS_TXOPLIMIT	= 4,
+	IEEE80211_WMMPARAMS_ACM		= 5,
+	IEEE80211_WMMPARAMS_NOACKPOLICY	= 6,
+};
+enum {
+	IEEE80211_PARAM_TURBO			= 1,	/* turbo mode */
+	IEEE80211_PARAM_MODE			= 2,	/* phy mode (11a, 11b, etc.) */
+	IEEE80211_PARAM_AUTHMODE		= 3,	/* authentication mode */
+	IEEE80211_PARAM_PROTMODE		= 4,	/* 802.11g protection */
+	IEEE80211_PARAM_MCASTCIPHER		= 5,	/* multicast/default cipher */
+	IEEE80211_PARAM_MCASTKEYLEN		= 6,	/* multicast key length */
+	IEEE80211_PARAM_UCASTCIPHERS		= 7,	/* unicast cipher suites */
+	IEEE80211_PARAM_UCASTCIPHER		= 8,	/* unicast cipher */
+	IEEE80211_PARAM_UCASTKEYLEN		= 9,	/* unicast key length */
+	IEEE80211_PARAM_WPA			= 10,	/* WPA mode (0,1,2) */
+	IEEE80211_PARAM_ROAMING			= 12,	/* roaming mode */
+	IEEE80211_PARAM_PRIVACY			= 13,	/* privacy invoked */
+	IEEE80211_PARAM_COUNTERMEASURES		= 14,	/* WPA/TKIP countermeasures */
+	IEEE80211_PARAM_DROPUNENCRYPTED		= 15,	/* discard unencrypted frames */
+	IEEE80211_PARAM_DRIVER_CAPS		= 16,	/* driver capabilities */
+	IEEE80211_PARAM_MACCMD			= 17,	/* MAC ACL operation */
+	IEEE80211_PARAM_WMM			= 18,	/* WMM mode (on, off) */
+	IEEE80211_PARAM_HIDESSID		= 19,	/* hide SSID mode (on, off) */
+	IEEE80211_PARAM_APBRIDGE    		= 20,   /* AP inter-sta bridging */
+	IEEE80211_PARAM_KEYMGTALGS		= 21,	/* key management algorithms */
+	IEEE80211_PARAM_RSNCAPS			= 22,	/* RSN capabilities */
+	IEEE80211_PARAM_INACT			= 23,	/* station inactivity timeout */
+	IEEE80211_PARAM_INACT_AUTH		= 24,	/* station auth inact timeout */
+	IEEE80211_PARAM_INACT_INIT		= 25,	/* station init inact timeout */
+	IEEE80211_PARAM_ABOLT			= 26,	/* Atheros Adv. Capabilities */
+	IEEE80211_PARAM_INACT_TICK		= 27,	/* station inactivity timer tick (seconds) */
+	IEEE80211_PARAM_DTIM_PERIOD		= 28,	/* DTIM period (beacons) */
+	IEEE80211_PARAM_BEACON_INTERVAL		= 29,	/* beacon interval (ms) */
+	IEEE80211_PARAM_DOTH			= 30,	/* 11.h is on/off */
+	IEEE80211_PARAM_PWRTARGET		= 31,	/* Current Channel Pwr Constraint */
+	IEEE80211_PARAM_GENREASSOC		= 32,	/* Generate a reassociation request */
+	IEEE80211_PARAM_COMPRESSION		= 33,	/* compression */
+	IEEE80211_PARAM_FF			= 34,	/* fast frames support  */
+	IEEE80211_PARAM_XR			= 35,	/* XR support */
+	IEEE80211_PARAM_BURST			= 36,	/* burst mode */
+	IEEE80211_PARAM_PUREG			= 37,	/* pure 11g (no 11b stations) */
+	IEEE80211_PARAM_AR			= 38,	/* AR support */
+	IEEE80211_PARAM_WDS			= 39,	/* Enable 4 address processing */
+	IEEE80211_PARAM_BGSCAN			= 40,	/* bg scanning (on, off) */
+	IEEE80211_PARAM_BGSCAN_IDLE		= 41,	/* bg scan idle threshold */
+	IEEE80211_PARAM_BGSCAN_INTERVAL		= 42,	/* bg scan interval */
+	IEEE80211_PARAM_MCAST_RATE		= 43,	/* Multicast Tx Rate */
+	IEEE80211_PARAM_COVERAGE_CLASS		= 44,	/* coverage class */
+	IEEE80211_PARAM_COUNTRY_IE		= 45,	/* enable country IE */
+	IEEE80211_PARAM_SCANVALID		= 46,	/* scan cache valid threshold */
+	IEEE80211_PARAM_ROAM_RSSI_11A		= 47,	/* rssi threshold in 11a */
+	IEEE80211_PARAM_ROAM_RSSI_11B		= 48,	/* rssi threshold in 11b */
+	IEEE80211_PARAM_ROAM_RSSI_11G		= 49,	/* rssi threshold in 11g */
+	IEEE80211_PARAM_ROAM_RATE_11A		= 50,	/* tx rate threshold in 11a */
+	IEEE80211_PARAM_ROAM_RATE_11B		= 51,	/* tx rate threshold in 11b */
+	IEEE80211_PARAM_ROAM_RATE_11G		= 52,	/* tx rate threshold in 11g */
+	IEEE80211_PARAM_UAPSDINFO		= 53,	/* value for qos info field */
+	IEEE80211_PARAM_SLEEP			= 54,	/* force sleep/wake */
+	IEEE80211_PARAM_QOSNULL			= 55,	/* force sleep/wake */
+	IEEE80211_PARAM_PSPOLL			= 56,	/* force ps-poll generation (sta only) */
+	IEEE80211_PARAM_EOSPDROP		= 57,	/* force uapsd EOSP drop (ap only) */
+	IEEE80211_PARAM_MARKDFS			= 58,	/* mark a dfs interference channel when found */
+	IEEE80211_PARAM_REGCLASS		= 59,	/* enable regclass ids in country IE */
+	IEEE80211_PARAM_DROPUNENC_EAPOL		= 60,	/* drop unencrypted eapol frames */
+	IEEE80211_PARAM_SHPREAMBLE		= 61,	/* Short Preamble */
+	IEEE80211_PARAM_DUMPREGS		= 62,	/* Pretty printed dump of Atheros hardware registers */
+	IEEE80211_PARAM_DOTH_ALGORITHM		= 63,	/* spectrum management algorithm */
+	IEEE80211_PARAM_DOTH_MINCOM   		= 64,	/* minimum number of common channels */
+	IEEE80211_PARAM_DOTH_SLCG		= 65,	/* permil of Stations Lost per Channel Gained */
+	IEEE80211_PARAM_DOTH_SLDG		= 66,	/* permil of Stations Lost per rssi Db Gained */
+	IEEE80211_PARAM_TXCONT			= 67,	/* continuous transmit mode (boolean) */
+	IEEE80211_PARAM_TXCONT_RATE		= 68,	/* continuous transmit mode data rate (in mbit/sec) - will use closest match from current rate table */
+	IEEE80211_PARAM_TXCONT_POWER		= 69,	/* power level in units of 0.5dBm */
+	IEEE80211_PARAM_DFS_TESTMODE		= 70,	/* do not perform DFS actions (i.e. markng DFS and channel change on interference), just report them via debug. */
+	IEEE80211_PARAM_DFS_CACTIME		= 71,	/* how long do we wait for chan availability
+							   scans ?
+							   FCC requires 60s, so that is the default. */
+	IEEE80211_PARAM_DFS_EXCLPERIOD		= 72,	/* DFS no-occupancy limit - how long do we stay
+							   off a channel once radar is detected?
+							   FCC requires 30m, so that is the default. */
+	IEEE80211_PARAM_BEACON_MISS_THRESH	= 73,	/* Beacon miss threshold (in beacons) */
+	IEEE80211_PARAM_BEACON_MISS_THRESH_MS	= 74,	/* Beacon miss threshold (in ms) */
+	IEEE80211_PARAM_MAXRATE			= 75,	/* Maximum rate (by table index) */
+	IEEE80211_PARAM_MINRATE			= 76,	/* Minimum rate (by table index) */
+	IEEE80211_PARAM_PROTMODE_RSSI		= 77,	/* RSSI Threshold for enabling protection mode */
+	IEEE80211_PARAM_PROTMODE_TIMEOUT	= 78,	/* Timeout for expiring protection mode */
+	IEEE80211_PARAM_BGSCAN_THRESH		= 79,	/* bg scan rssi threshold */
+	IEEE80211_PARAM_RSSI_DIS_THR	= 80,	/* rssi threshold for disconnection */
+	IEEE80211_PARAM_RSSI_DIS_COUNT	= 81,	/* counter for rssi threshold */
+	IEEE80211_PARAM_WDS_SEP			= 82,	/* move wds stations into separate interfaces */
+	IEEE80211_PARAM_MAXASSOC		= 83,	/* maximum associated stations */
+	IEEE80211_PARAM_PROBEREQ		= 84,	/* enable handling of probe requests */
+	IEEE80211_PARAM_BEACON_TXP		= 85,	/* set beacon tx power */
+};
+
+#define	SIOCG80211STATS			(SIOCDEVPRIVATE+2)
+/* NB: require in+out parameters so cannot use wireless extensions, yech */
+#define	IEEE80211_IOCTL_GETKEY		(SIOCDEVPRIVATE+3)
+#define	IEEE80211_IOCTL_GETWPAIE	(SIOCDEVPRIVATE+4)
+#define	IEEE80211_IOCTL_STA_STATS	(SIOCDEVPRIVATE+5)
+#define	IEEE80211_IOCTL_STA_INFO	(SIOCDEVPRIVATE+6)
+#define	SIOC80211IFCREATE		(SIOCDEVPRIVATE+7)
+#define	SIOC80211IFDESTROY	 	(SIOCDEVPRIVATE+8)
+#define	IEEE80211_IOCTL_SCAN_RESULTS	(SIOCDEVPRIVATE+9)
+
+struct ieee80211_clone_params {
+	char icp_name[IFNAMSIZ];		/* device name */
+	u_int16_t icp_opmode;			/* operating mode */
+	u_int16_t icp_flags;			/* see below */
+#define	IEEE80211_CLONE_BSSID	0x0001		/* allocate unique mac/bssid */
+#define	IEEE80211_NO_STABEACONS	0x0002		/* Do not setup the station beacon timers */
+};
+
+/* APPIEBUF related definitions */
+
+/* Management frame type to which application IE is added */
+enum {
+	IEEE80211_APPIE_FRAME_BEACON		= 0,
+	IEEE80211_APPIE_FRAME_PROBE_REQ		= 1,
+	IEEE80211_APPIE_FRAME_PROBE_RESP	= 2,
+	IEEE80211_APPIE_FRAME_ASSOC_REQ		= 3,
+	IEEE80211_APPIE_FRAME_ASSOC_RESP	= 4,
+	IEEE80211_APPIE_NUM_OF_FRAME		= 5
+};
+
+struct ieee80211req_getset_appiebuf {
+	u_int32_t	app_frmtype;		/* management frame type for which buffer is added */
+	u_int32_t	app_buflen;		/* application-supplied buffer length */
+	u_int8_t	app_buf[0];		/* application-supplied IE(s) */
+};
+
+/* Flags ORed by application to set filter for receiving management frames */
+enum {
+	IEEE80211_FILTER_TYPE_BEACON		= 1<<0,
+	IEEE80211_FILTER_TYPE_PROBE_REQ		= 1<<1,
+	IEEE80211_FILTER_TYPE_PROBE_RESP	= 1<<2,
+	IEEE80211_FILTER_TYPE_ASSOC_REQ		= 1<<3,
+	IEEE80211_FILTER_TYPE_ASSOC_RESP	= 1<<4,
+	IEEE80211_FILTER_TYPE_AUTH		= 1<<5,
+	IEEE80211_FILTER_TYPE_DEAUTH		= 1<<6,
+	IEEE80211_FILTER_TYPE_DISASSOC		= 1<<7,
+	IEEE80211_FILTER_TYPE_ALL		= 0xFF	/* used to check the valid filter bits */
+};
+
+struct ieee80211req_set_filter {
+	u_int32_t app_filterype;		/* management frame filter type */
+};
+
+
+#endif /* __linux__ */
+
+#endif /* _NET80211_IEEE80211_IOCTL_H_ */