summaryrefslogtreecommitdiff
path: root/scripts/flash.sh
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2006-10-13 22:51:49 +0200
committerFelix Fietkau <nbd@openwrt.org>2016-03-20 17:29:15 +0100
commit60c1f0f64d23003a19a07d6b9638542130f6641d (patch)
tree8fb2787f4c49baded97cd55e0c371fe1cffce2b6 /scripts/flash.sh
parentd58a09110ccfa95f06c983fe796806f2e035c9d2 (diff)
parentb3ce218b51746d3a576221ea542facf3a1703ab2 (diff)
downloadmtk-20170518-60c1f0f64d23003a19a07d6b9638542130f6641d.zip
mtk-20170518-60c1f0f64d23003a19a07d6b9638542130f6641d.tar.gz
mtk-20170518-60c1f0f64d23003a19a07d6b9638542130f6641d.tar.bz2
finally move buildroot-ng to trunk
Diffstat (limited to 'scripts/flash.sh')
-rw-r--r--scripts/flash.sh66
1 files changed, 66 insertions, 0 deletions
diff --git a/scripts/flash.sh b/scripts/flash.sh
new file mode 100644
index 0000000..8841c35
--- /dev/null
+++ b/scripts/flash.sh
@@ -0,0 +1,66 @@
+#!/bin/bash
+#
+# tftp flash script for wireless routers
+#
+# Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su>
+# Copyright (C) 2005 by Waldemar Brodkorb <wbx@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then
+ echo Usage: $0 firmware vendor
+cat << EOF
+IMPORTANT:
+Notes for Linksys / Asus WL500gx router:
+ be sure you have set boot_wait to yes. Power on your router
+ after executing this script.
+
+Notes for Asus WL500g router:
+ be sure POWER led is flashing (If this is not the case
+ poweroff the device, push the reset button & power on
+ it again, then release button)
+
+1) connect your pc to the LAN port
+2) be sure your link is up and has an address in the
+ 192.168.1.0/24 address range (and not the 192.168.1.1)
+
+Notes for Toshiba router:
+ boot_wait is enabled by default on these units.
+
+1) connect your pc to any of the four LAN ports
+2) be sure your link is up and has an address in the
+ 192.168.10.1/24 address range (and not the 192.168.10.1)
+3) run this script (unit will only accept .trx images)
+4) Turn unit power on.
+
+EOF
+ exit 0
+fi
+if [ "$2" == "asus" ]; then
+echo Confirming IP address setting...
+echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1
+echo Flashing 192.168.1.1 using $1...
+echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1
+echo Please wait until leds stops flashing.
+elif [ "$2" == "linksys" ]; then
+echo Flashing 192.168.1.1 using $1...
+echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1
+echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1.
+elif [ "$2" == "toshiba" ]; then
+echo Flashing 192.168.10.1 using $1...
+echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1
+echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1.
+fi