summaryrefslogtreecommitdiff
path: root/scripts
diff options
context:
space:
mode:
authorRod Whitby <rod@whitby.id.au>2006-12-23 08:09:34 +0000
committerRod Whitby <rod@whitby.id.au>2006-12-23 08:09:34 +0000
commitaa80149e73e2ac9155d55fcd9cf9b7190e3377f2 (patch)
treeac835df6f358da37223ed5b8cf745798ee3e3e86 /scripts
parentfe42563e1f3d5bb15b47aa59b9fcf5e8b1ee06a9 (diff)
downloadmtk-20170518-aa80149e73e2ac9155d55fcd9cf9b7190e3377f2.zip
mtk-20170518-aa80149e73e2ac9155d55fcd9cf9b7190e3377f2.tar.gz
mtk-20170518-aa80149e73e2ac9155d55fcd9cf9b7190e3377f2.tar.bz2
Utility for creating installable image for the NSLU2.
SVN-Revision: 5892
Diffstat (limited to 'scripts')
-rwxr-xr-xscripts/slugimage.pl1202
1 files changed, 1202 insertions, 0 deletions
diff --git a/scripts/slugimage.pl b/scripts/slugimage.pl
new file mode 100755
index 0000000..541325d
--- /dev/null
+++ b/scripts/slugimage.pl
@@ -0,0 +1,1202 @@
+#!/usr/bin/perl
+#
+# SlugImage : Manipulate NSLU2 firmware images
+# Dwayne Fontenot (jacques)
+# Rod Whitby (rwhitby)
+# www.nslu2-linux.org
+#
+# Copyright (c) 2004, 2006, Dwayne Fontenot & Rod Whitby
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# Neither the name of the NSLU2-Linux Development Team nor the names
+# of its contributors may be used to endorse or promote products
+# derived from this software without specific prior written
+# permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+use strict;
+use warnings;
+
+use Getopt::Long qw(:config no_ignore_case);
+use POSIX qw(tmpnam);
+
+my($debug) = 0;
+my($quiet) = 0;
+my($flash_start) = 0x50000000;
+my($flash_len) = 0x00800000;
+my($block_size) = 0x00020000;
+my($kernel_offset) = 0x00060000;
+my($kernel_size) = 0x00100000;
+my($ramdisk_offset) = 0x00160000;
+my(@cleanup);
+
+# The last 70 bytes of the SercommRedBootTrailer (i.e. excluding MAC
+# address). Needed to create an image with an empty RedBoot partition
+# since the Sercomm upgrade tool checks for this trailer.
+# http://www.nslu2-linux.org/wiki/Info/SercommRedBootTrailer
+my @sercomm_redboot_trailer = (0x4573, 0x4372, 0x4d6f, 0x006d, 0x0001,
+ 0x0400, 0x3170, 0x5895, 0x0010, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0001, 0x0000, 0x0000, 0x0000, 0x0003, 0x2300,
+ 0x0063, 0x0000, 0x7320, 0x7245, 0x6f43, 0x6d4d);
+
+# There's a 16 byte Sercomm trailer at the end of the flash. It is used
+# by RedBoot to detect a Sercomm flash layout and to configure the
+# Sercomm upgrade system.
+# http://www.nslu2-linux.org/wiki/Info/SercommFlashTrailer
+my @sercomm_flash_trailer = (0x0100, 0x0000, 0x6323, 0xf790, 0x5265,
+ 0x4f63, 0x4d6d, 0xb400);
+
+# Take $data, and pad it out to $total_len bytes, appending 0xff's.
+sub padBytes {
+ my($data,$total_len) = @_;
+
+ # 0xFF is used to pad, as it's the erase value of the flash.
+ my($pad_char) = pack("C",0xff);
+ my($pad_len) = $total_len - length($data);
+
+ # A request for negative padding is indicative of a logic error ...
+ if (length($data) > $total_len) {
+ die sprintf("padBytes error: data (%d) is longer than total_len (%d)", length($data), $total_len);
+ }
+
+ return $data . ($pad_char x $pad_len);
+}
+
+# Return the next multiple of block_size larger than or equal to $data_len.
+sub paddedSize {
+ my($data_len) = @_;
+
+ use integer;
+ return (($data_len - 1) / $block_size) * $block_size + $block_size;
+}
+
+# Return the number of block_size blocks required to hold $data_len.
+sub numBlocks {
+ my($data_len) = @_;
+
+ use integer;
+ return (($data_len - 1) / $block_size) + 1;
+}
+
+# Pack the name, address, size and optional skip regions of a partition entry into binary form.
+sub createPartitionEntry {
+ my($name, $flash_base, $size, $skips) = @_;
+ my $entry;
+
+ my($zero_long) = 0x0000;
+
+ # Pack the partition entry according to the format that RedBoot (and the MTD partition parsing code) requires.
+ $entry = pack("a16N5x212N2",$name,$flash_base,$zero_long,$size,$zero_long,$zero_long,$zero_long,$zero_long);
+
+ # Optionally put a skip header into the padding area.
+ if (defined $skips) {
+ my $i = scalar(@$skips);
+ foreach my $region (@$skips) {
+ substr($entry, -8 - 12*$i, 12) =
+ pack("a4N2", "skip", $region->{'offset'}, $region->{'size'});
+ $i--;
+ }
+ }
+
+ return $entry;
+}
+
+# Parse partition entry and return anon array ref [$name, $offset, $size, $skip] or return 0 on partition terminator.
+sub parsePartitionEntry {
+ my($partition_entry) = @_;
+
+ my($entry_len) = 0x100;
+ length($partition_entry) eq $entry_len or die "parsePartitionEntry: partition entry length is not $entry_len!\n";
+
+ # Unpack the partition table entry, saving those values in which we are interested.
+ my($name, $flash_base, $size, $dummy_long, $padding, $skips);
+ ($name, $flash_base, $dummy_long, $size, $dummy_long, $dummy_long, $padding, $dummy_long, $dummy_long) =
+ unpack("a16N5a212N2",$partition_entry);
+
+ # A partition entry starting with 0xFF terminates the table.
+ if (unpack("C", $name) eq 0xff) {
+ # %%% FIXME: This should only skip, not terminate. %%%
+ $debug and print "Found terminator for <FIS directory>\n";
+ return 0;
+ }
+
+ # Remove trailing nulls from the partition name.
+ $name =~ s/\000+//;
+
+ # Extract the skip regions out of the padding area.
+ $padding =~ s/^\000+//;
+ $padding =~ s/\000*skip(........)\000*/$1/g;
+ $padding =~ s/\000+$//;
+
+ # Store the skip regions in an array for later use.
+ while (length($padding)) {
+ my $region = {};
+ ($region->{'offset'}, $region->{'size'}) =
+ unpack("N2", $padding);
+ $debug and printf("Found skip region at 0x%05X, size 0x%05X\n",
+ $region->{'offset'}, $region->{'size'});
+ push(@$skips, $region);
+ $padding = substr($padding,8);
+ }
+
+ return [$name, $flash_base - $flash_start, $size, $skips];
+}
+
+# Return partition table from data is one exists, otherwise return 0.
+sub findPartitionTable {
+ my($data_buf) = @_;
+
+ unpack("a7", $data_buf) eq 'RedBoot' or return 0;
+ return substr($data_buf, 0, 0x1000)
+}
+
+# Parse partition table and return array of anonymous array references ([$name, $offset, $size, $skips], ...).
+sub parsePartitionTable {
+ my($partition_table) = @_;
+
+ my(@partitions, $fields_ref);
+ my($entry_len) = 0x100;
+ my($partition_count) = 0;
+
+ # Loop through the fixed size partition table entries, and store the entries in @partitions.
+ # %%% FIXME: This doesn't handle the case of a completely full partition table. %%%
+ while ($fields_ref = parsePartitionEntry(substr($partition_table, $partition_count * $entry_len, $entry_len))) {
+ $debug and printf("Found <%s> at 0x%08X (%s)%s\n", $fields_ref->[0], $fields_ref->[1],
+ ($fields_ref->[2] >= $block_size ?
+ sprintf("%d blocks", numBlocks($fields_ref->[2])) :
+ sprintf("0x%05X bytes", $fields_ref->[2])),
+ (defined $fields_ref->[3] ?
+ sprintf(" [%s]",
+ join(", ",
+ map { sprintf("0x%05X/0x%05X", $_->{'offset'},$_->{'size'}) }
+ @{$fields_ref->[3]})) :
+ ""));
+ $partitions[$partition_count++] = $fields_ref;
+ }
+ return(@partitions);
+}
+
+# Create an empty jffs2 block.
+sub jffs2Block {
+ return padBytes(pack("N3", 0x19852003, 0x0000000c, 0xf060dc98), $block_size);
+}
+
+# Write out $data to $filename,
+sub writeOut {
+ my($data, $filename) = @_;
+
+ open FILE,">$filename" or die "Can't open file \"$filename\": $!\n";
+
+ if (defined($data)) { print FILE $data;}
+
+ close FILE or die "Can't close file \"$filename\": $!\n";
+}
+
+# Not used at the moment.
+sub trailerData {
+ my($product_id) = 0x0001;
+ my($protocol_id) = 0x0000;
+ my($firmware_version) = 0x2325;
+ my($unknown1) = 0x90f7;
+ my($magic_number) = 'eRcOmM';
+ my($unknown2) = 0x00b9;
+
+ return pack("n4a6n",$product_id,$protocol_id,$firmware_version,$unknown1,$magic_number,$unknown2);
+}
+
+# Print the contents of the Sercomm RedBoot trailer.
+sub printRedbootTrailer {
+ my($redboot_data) = @_;
+
+ my($correct_redboot_len) = 0x40000;
+ my($redboot_data_len) = length($redboot_data);
+
+ if ($redboot_data_len != $correct_redboot_len) {
+ printf("Redboot length (0x%08X) is not 0x%08X\n", $redboot_data_len, $correct_redboot_len);
+ return;
+ }
+
+ # The trailer is the last 80 bytes of the redboot partition.
+ my($redboot_trailer) = substr($redboot_data, -80);
+
+ writeOut($redboot_trailer, 'RedbootTrailer');
+
+ my($mac_addr0, $mac_addr1, $mac_addr2, $unknown, $prefix, $ver_ctrl, $down_ctrl, $hid, $hver, $prodid, $prodidmask,
+ $protid, $protidmask, $funcid, $funcidmask, $fver, $cseg, $csize, $postfix) =
+ unpack("n3Na7n2a32n10a7",$redboot_trailer);
+
+ printf("MAC address is %04X%04X%04X\n", $mac_addr0, $mac_addr1, $mac_addr2);
+ printf("unknown: %08X\n", $unknown);
+ printf("%s:%04X:%04X:%s\n", $prefix, $ver_ctrl, $down_ctrl, $postfix);
+ printf("VerControl: %04X\nDownControl: %04X\n", $ver_ctrl, $down_ctrl);
+ printf("hid: %04X %04X %04X %04X %04X %04X %04X %04X %04X %04X %04X %04X %04X %04X %04X %04X\n", unpack("n16", $hid));
+ printf("Hver: %04X\nProdID: %04X\nProtID: %04X\nFuncID: %04X\nFver: %04X\nCseg: %04X\nCsize: %04X\n",
+ $hver, $prodid, $protid, $funcid, $fver, $cseg, $csize);
+}
+
+# remove the optional Loader partition
+sub removeOptionalLoader {
+ my($partitions_ref) = @_;
+
+ my $index;
+ my $count = 0;
+ map {
+ if (not defined $index) {
+ if ($_->{'name'} eq "Loader") {
+ $index = $count;
+ }
+ $count++;
+ }
+ } @$partitions_ref;
+
+ defined $index or die "Cannot find the Loader partition\n";
+
+ splice(@$partitions_ref, $index, 1);
+
+ # Set fixed offsets and sizes for Kernel and Ramdisk
+ map {
+ if ($_->{'name'} eq 'Kernel') {
+ $_->{'offset'} = $kernel_offset;
+ $_->{'size'} = $kernel_size;
+ $_->{'variable'} = 0;
+ }
+ if ($_->{'name'} eq 'Ramdisk') {
+ $_->{'offset'} = $ramdisk_offset;
+ }
+ } @$partitions_ref;
+
+ return;
+}
+
+
+# populate @partitions based on the firmware's partition table
+sub spliceFirmwarePartitions {
+ my($firmware_buf, $partitions_ref) = @_;
+
+ # we know that partition table, if it exists, begins at start of 'FIS directory' and has max length 0x1000
+ my($partition_table);
+ map {
+ $_->{'name'} eq 'FIS directory' and
+ $partition_table = findPartitionTable(substr($firmware_buf, $_->{'offset'}, $_->{'size'}));
+ } @$partitions_ref;
+
+ # return 0 here if no partition table in FIS directory
+ return if not $partition_table;
+
+ my @new_partitions = parsePartitionTable($partition_table);
+
+ # Remove the optional second stage bootloader if it is not found in the FIS directory.
+ if (not grep { $_->[0] eq 'Loader' } @new_partitions) {
+ removeOptionalLoader($partitions_ref);
+ }
+
+ my($partition_count) = 0;
+ my($splice) = 0;
+ map {
+
+ # Skip pseudo partitions.
+ while (($partition_count < scalar(@$partitions_ref)) and
+ $partitions_ref->[$partition_count]->{'pseudo'}) {
+ $debug and printf("Skipped <%s> (pseudo partition)\n", $partitions_ref->[$partition_count]->{'name'});
+ $partition_count++;
+ }
+
+ # If we are in a variable area, and we haven't reached the end of it,
+ # then splice in another partition for use by the later code.
+ if ($splice and ($partitions_ref->[$partition_count]->{'name'} ne $_->[0])) {
+ $debug and printf("Splicing new partition <%s> before <%s>\n",
+ $_->[0], $partitions_ref->[$partition_count]->{'name'});
+ splice(@{$partitions_ref}, $partition_count, 0, ({'name' => "",'variable'=>1,'header'=>0}));
+ }
+
+ my $partition = $partitions_ref->[$partition_count];
+
+ # Variable partitions can be overridden by the real FIS directory
+ if ($partition->{'variable'}) {
+
+ # Only override the filename if the partition name is not set or doesn't match
+ if ($partition->{'name'} ne $_->[0]) {
+
+ if (length($partition->{'name'})) {
+ $debug and printf("Overwriting <%s> with <%s>\n",
+ $partitions_ref->[$partition_count]->{'name'}, $_->[0]);
+ }
+
+ $partition->{'name'} = $_->[0];
+ $partition->{'file'} = $_->[0];
+ }
+
+ # Set the offset, size and skips based on the real partition table
+ $partition->{'offset'} = $_->[1];
+ $partition->{'size'} = $_->[2];
+ $partition->{'skips'} = $_->[3];
+
+ $debug and printf("Locating <%s> at 0x%08X (%s)\n",
+ $partition->{'name'}, $partition->{'offset'},
+ ($partition->{'size'} >= $block_size ?
+ sprintf("%d blocks", numBlocks($partition->{'size'})) :
+ sprintf("0x%05X bytes", $partition->{'size'})));
+
+ $splice = 1;
+ }
+
+ # Fixed partitions cannot be overridden
+ else {
+ ($partition->{'name'} eq $_->[0]) or
+ die "Unexpected partition <",$_->[0],"> (expecting <",$partition->{'name'},">)\n";
+
+ $debug and printf("Locating <%s> at 0x%08X (%s)\n",
+ $partition->{'name'}, $partition->{'offset'},
+ ($partition->{'size'} >= $block_size ?
+ sprintf("%d blocks", numBlocks($partition->{'size'})) :
+ sprintf("0x%05X bytes", $partition->{'size'})));
+
+ $splice = 0;
+ }
+
+ $partition_count++;
+
+ } @new_partitions;
+
+ return;
+}
+
+# Read in an 8MB firmware file, and store the data into @partitions.
+# Note that the data is only stored in a partition if 'offset' and 'size' are defined,
+# and it does not already have data stored in it.
+sub readInFirmware {
+ my($filename, $partitions_ref) = @_;
+
+ my($firmware_buf);
+ my($total_length) = 0x800000;
+
+ open FILE,$filename or die "Can't find firmware image \"$filename\": $!\n";
+ read FILE,$firmware_buf,$total_length or die "Can't read $total_length bytes from \"$filename\": $!\n";
+ close FILE or die "Can't close \"$filename\": $!\n";
+
+ $debug and printf("Read 0x%08X bytes from \"%s\"\n", length($firmware_buf), $filename);
+
+ spliceFirmwarePartitions($firmware_buf, $partitions_ref);
+
+ # Read the parts of the firmware file into the partitions table.
+ map {
+ if (defined $_->{'offset'} and defined $_->{'size'}) {
+
+ if (defined $_->{'data'}) {
+ $debug and printf("Not overwriting data in <%s>\n", $_->{'name'});
+ }
+ else {
+
+ # Slurp up the data, based on whether a header is present or not
+ if ($_->{'header'}) {
+
+ # Read the length, and grab the data based on the length.
+ my($data_len) = unpack("N", substr($firmware_buf, $_->{'offset'}));
+
+ # A length of 0xFFFFFFFF means that the area is not initialised
+ if ($data_len != 0xFFFFFFFF) {
+ $debug and printf("Found header size of 0x%08X bytes for <%s>\n", $data_len, $_->{'name'});
+ $_->{'data'} = substr($firmware_buf, $_->{'offset'} + $_->{'header'}, $data_len);
+ }
+ }
+ else {
+
+ # Grab the whole partition, using the maximum size.
+ $_->{'data'} = substr($firmware_buf, $_->{'offset'}, $_->{'size'});
+ }
+
+ # If skip regions are defined, remove them from the data.
+ if (defined $_->{'skips'}) {
+ my $removed = 0;
+ foreach my $region (@{$_->{'skips'}}) {
+ if (($region->{'offset'} > 0) or
+ not ($_->{'header'} > 0)) {
+ $debug and printf("Removing 0x%05X bytes from offset 0x%05X\n",
+ $region->{'size'}, $region->{'offset'});
+ $region->{'data'} = substr($_->{'data'}, $region->{'offset'} - $removed, $region->{'size'}, '');
+ }
+ $removed += $region->{'size'};
+ }
+ }
+
+ $quiet or defined $_->{'data'} and printf("Read %s into <%s>\n",
+ (length($_->{'data'}) >= $block_size ?
+ sprintf("%d blocks", numBlocks(length($_->{'data'}))) :
+ sprintf("0x%05X bytes", length($_->{'data'}))), $_->{'name'});
+ }
+ }
+ } @$partitions_ref;
+}
+
+# Write the partition data stored in memory out into the files associated with each.
+sub writeOutFirmwareParts {
+ my(@partitions) = @_;
+
+ # Write out the parts of the firmware file.
+ map {
+
+ # We can only write if 'data' and 'file' are defined.
+ if (defined $_->{'file'} and defined $_->{'data'} and length($_->{'data'})) {
+ writeOut($_->{'data'}, $_->{'file'});
+ $quiet or printf("Wrote 0x%08X bytes from <%s> into \"%s\"\n",
+ length($_->{'data'}), $_->{'name'}, $_->{'file'});
+ }
+ else {
+ $debug and printf("Skipping <%s> (%s)\n", $_->{'name'},
+ (not defined $_->{'file'}) ?
+ "no filename specified" :
+ "no data to write");
+ }
+
+ } @partitions;
+
+ return;
+}
+
+# Read in the partition data from the files associated with each and store in memory.
+sub readInFirmwareParts {
+ my(@partitions) = (@_);
+
+ undef $/; # we want to slurp
+
+ map {
+
+ my $file = $_->{'file'};
+ if (defined $file) {
+ open FILE,$file or die "Can't find firmware part \"$file\": $!\n";
+
+ # Slurp in the data
+ $_->{'data'} = <FILE>;
+
+ # close the file
+ close FILE or die "Can't close file \"$file\": $!\n";
+
+ # Optionally byteswap the data
+ if ($_->{'byteswap'}) {
+ # Byte swap the data (which has to be padded to a multiple of 4 bytes).
+ $_->{'data'} = pack("N*", unpack("V*", $_->{'data'}.pack("CCC", 0)));
+ }
+
+ # Keep track of the actual size.
+ my $size;
+
+ if ($_->{'header'}) {
+ if ($_->{'pseudo'}) {
+ $size = $_->{'header'} + length($_->{'data'});
+ }
+ else {
+ $size = paddedSize($_->{'header'} + length($_->{'data'}));
+ }
+ }
+ elsif (not $_->{'pseudo'}) {
+ $size = paddedSize(length($_->{'data'}));
+ }
+ else {
+ $size = length($_->{'data'});
+ }
+
+ # Check to make sure the file contents are not too large.
+ if (defined $_->{'size'} and ($size > $_->{'size'})) {
+ die sprintf("Ran out of flash space in <%s> - %s too large.\n", $_->{'name'},
+ sprintf("0x%05X bytes", ($size - $_->{'size'})));
+ }
+
+ # If the partition does not have a fixed size, the calculate the size.
+ if (not defined $_->{'size'}) {
+ $_->{'size'} = $size;
+ }
+
+ # Keep the user appraised ...
+ $quiet or printf("Read 0x%08X bytes from \"%s\" into <%s> (%s / %s)%s\n",
+ length($_->{'data'}), $_->{'file'}, $_->{'name'},
+ ($size >= $block_size ?
+ sprintf("%d blocks", numBlocks($size)) :
+ sprintf("0x%05X bytes", $size)),
+ ($_->{'size'} >= $block_size ?
+ sprintf("%d blocks", numBlocks($_->{'size'})) :
+ sprintf("0x%05X bytes", $_->{'size'})),
+ ($_->{'byteswap'} ? " (byte-swapped)" : ""));
+ }
+
+ } @partitions;
+
+ return;
+}
+
+# layoutPartitions : this function must be ugly - it needs to verify RedBoot, SysConf, Kernel, Ramdisk, and
+# FIS directory partitions exist, are in the correct order, and do not have more data than can fit in
+# their lengths (fixed for all but Ramdisk, which has a minimum length of one block).
+# If Rootdisk and/or Userdisk exist, it must also verify that their block padded lengths are not
+# too great for the available space.
+# input : an array of hashes, some of which are populated with data
+# output: same reference with start and size (partition not data) also populated. this populated structure
+# can then be passed to buildPartitionTable() to generate the actual partition table data
+sub layoutPartitions {
+ my(@partitions) = @_;
+
+ # Find the last variable size partition, and save a pointer to it for later use
+ my $lastdisk;
+ my $directory_offset;
+ my $curdisk = $partitions[0];
+ map {
+ if (not defined $lastdisk) {
+ if ($_->{'name'} eq "FIS directory") {
+ $lastdisk = $curdisk;
+ $directory_offset = $_->{'offset'};
+ }
+ else {
+ $curdisk = $_;
+ }
+ }
+ } @partitions;
+
+ $lastdisk or die "Couldn't find the last variable size partition\n";
+
+ $debug and printf("Last variable size partition is <%s>\n", $lastdisk->{'name'});
+
+ #
+ # here we go through the $partitions array ref and fill in all the values
+ #
+
+ # This points to where the next partition should be placed.
+ my $pointer = $flash_start;
+
+ map {
+
+ $debug and printf("Pointer is 0x%08X\n", $pointer);
+
+ # If this is the last variable size partition, then fill the rest of the space.
+ if ($_->{'name'} eq $lastdisk->{'name'}) {
+ $_->{'size'} = paddedSize($directory_offset + $flash_start - $pointer);
+ $debug and printf("Padding last variable partition <%s> to 0x%08X bytes\n", $_->{'name'}, $_->{'size'});
+ }
+
+ # Handle requests for partition creation first.
+ if (defined $_->{'size'} and not defined $_->{'data'} and ($_->{'name'} ne "FIS directory")) {
+
+ # A zero size is a request to fill all available space.
+ if ($_->{'size'} == 0) {
+ # Grab the start of the FIS directory, and use all the space up to there.
+ $_->{'size'} = paddedSize($directory_offset + $flash_start - $pointer);
+
+ # Create an empty partition of the requested size.
+ $_->{'data'} = padBytes("", $_->{'size'});
+
+ $debug and printf("Creating empty partition <%s> of 0x%08X bytes\n", $_->{'name'}, $_->{'size'});
+ }
+
+ if (not defined $_->{'offset'}) {
+ # Check to make sure that the requested size is not too large.
+ if (($pointer + $_->{'size'}) > ($flash_start + $directory_offset)) {
+ die "Ran out of flash space in <", $_->{'name'}, ">\n";
+ }
+ }
+ else {
+ # Check to make sure that the requested size is not too large.
+ if (($_->{'offset'} + $_->{'size'}) > ($flash_start + $directory_offset)) {
+ die "Ran out of flash space in <", $_->{'name'}, ">\n";
+ }
+ }
+ }
+
+ # Then handle known partitions, and allocate them.
+ if (defined $_->{'size'}) {
+
+ # Determine the start and offset of the current partition.
+ if (defined $_->{'offset'}) {
+ $_->{'start'} = $flash_start + $_->{'offset'};
+ }
+
+ # If offset is not defined, then calculate it.
+ else {
+ $_->{'start'} = $pointer;
+ $_->{'offset'} = $_->{'start'} - $flash_start;
+ }
+
+ my $size = defined $_->{'data'} ? length($_->{'data'}) : 0;
+
+ # Add skip regions for the partitions with headers.
+ if ($_->{'header'} > 0) {
+ # Define the skip region for the initial Sercomm header.
+ push(@{$_->{'skips'}},
+ { 'offset' => 0, 'size' => $_->{'header'}, 'data' => undef });
+ # Allow for the Sercomm header to be prepended to the data.
+ $size += $_->{'header'};
+ }
+
+ # Determine if the partition requires a Sercomm skip region.
+ if (($_->{'offset'} < $ramdisk_offset) and
+ (($_->{'offset'} + $size) > $ramdisk_offset)) {
+ # Define the skip region for the inline Sercomm header.
+ push(@{$_->{'skips'}},
+ { 'offset' => ($ramdisk_offset - $_->{'offset'}), 'size' => 16,
+ 'data' => pack("N4", $block_size) });
+ # Allow for the Sercomm header to be inserted in the data.
+ $size += 16;
+ }
+
+ # Extend to another block if required.
+ if ($size > $_->{'size'}) {
+ $_->{'size'} = $size;
+ printf("Extending partition <%s> to 0x%08X bytes\n", $_->{'name'}, $_->{'size'});
+ }
+
+ # Keep the user appraised ...
+ $debug and printf("Allocated <%s> from 0x%08X to 0x%08X (%s / %s)\n",
+ $_->{'name'}, $_->{'start'}, $_->{'start'} + $_->{'size'},
+ ($size >= $block_size ?
+ sprintf("%d blocks", numBlocks($size)) :
+ sprintf("0x%05X bytes", $size)),
+ ($_->{'size'} >= $block_size ?
+ sprintf("%d blocks", numBlocks($_->{'size'})) :
+ sprintf("0x%05X bytes", $_->{'size'})));
+
+ # Check to make sure we have not run out of room.
+ if (($_->{'start'} + $_->{'size'}) > ($flash_start + $flash_len)) {
+ die "Ran out of flash space in <", $_->{'name'}, ">\n";
+ }
+
+ $debug and printf("Moving pointer from 0x%08X to 0x%08X (0x%08X + 0x%08X)\n",
+ $pointer, paddedSize($_->{'start'} + $_->{'size'}),
+ $_->{'start'}, $_->{'size'});
+
+ # Move the pointer up, in preparation for the next partition.
+ $pointer = paddedSize($_->{'start'} + $_->{'size'});
+
+ }
+
+ } @partitions;
+
+ return;
+}
+
+sub buildPartitionTable {
+ my(@partitions) = @_;
+
+ my($flash_start) = 0x50000000;
+ my($partition_data) = '';
+
+ map {
+
+ # Collate the partition data for all known partitions.
+ if (not $_->{'pseudo'} and defined $_->{'offset'} and defined $_->{'size'}) {
+
+ # Pack and append the binary table entry for this partition.
+ $partition_data .= createPartitionEntry($_->{'name'}, $_->{'offset'} + $flash_start,
+ $_->{'size'}, $_->{'skips'});
+
+ # If this is the FIS directory, then write the partition table data into it.
+ if ($_->{'name'} eq "FIS directory") {
+ # Explicitly terminate the partition data.
+ $partition_data .= pack("C",0xff) x 0x100;
+ $_->{'data'} = padBytes($partition_data, $_->{'size'});
+ }
+
+ my $size = length($_->{'data'});
+
+ # Keep the user appraised ...
+ $debug and printf("Table entry <%s> from 0x%08X to 0x%08X (%s / %s)%s\n",
+ $_->{'name'}, $_->{'start'}, $_->{'start'} + $_->{'size'},
+ ($size >= $block_size ?
+ sprintf("%d blocks", numBlocks($size)) :
+ sprintf("0x%05X bytes", $size)),
+ ($_->{'size'} >= $block_size ?
+ sprintf("%d blocks", numBlocks($_->{'size'})) :
+ sprintf("0x%05X bytes", $_->{'size'})),
+ (defined $_->{'skips'} ?
+ sprintf("\nTable entry <%s> skip %s", $_->{'name'},
+ join(", ",
+ map { sprintf("0x%08X to 0x%08X", $_->{'offset'},
+ $_->{'offset'} + $_->{'size'} - 1) }
+ @{$_->{'skips'}})) :
+ "")
+ );
+ }
+ else {
+ $debug and print "No table entry required for <", $_->{'name'}, ">\n";
+ }
+
+ } @partitions;
+
+ return;
+}
+
+sub writeOutFirmware {
+ my($filename, @partitions) = @_;
+
+ # Clear the image to start.
+ my $image_buf = "";
+
+ map {
+
+ # We can only write a partition if it has an offset, a size, and some data to write.
+ if (defined $_->{'offset'} and defined $_->{'size'} and defined $_->{'data'}) {
+
+ # Keep track of the end of the image.
+ my $end_point = length($image_buf);
+
+ # If the next partition is well past the end of the current image, then pad it.
+ if ($_->{'offset'} > $end_point) {
+ $image_buf .= padBytes("", $_->{'offset'} - $end_point);
+ $quiet or printf("Padded %s before <%s> in \"%s\"\n",
+ ((length($image_buf) - $end_point) >= $block_size ?
+ sprintf("%d blocks", numBlocks(length($image_buf) - $end_point)) :
+ sprintf("0x%05X bytes", length($image_buf) - $end_point)),
+ $_->{'name'}, $filename);
+ }
+
+ # If the next parition is before the end of the current image, then rewind.
+ elsif ($_->{'offset'} < $end_point) {
+ $debug and printf("Rewound %s before <%s> in \"%s\"\n",
+ (($end_point - $_->{'offset'}) >= $block_size ?
+ sprintf("%d blocks", numBlocks($end_point - $_->{'offset'})) :
+ sprintf("0x%05X bytes", $end_point - $_->{'offset'})),
+ $_->{'name'}, $filename);
+# if (($end_point - $_->{'offset'}) >= $block_size) {
+# die "Allocation error: rewound a full block or more ...\n";
+# }
+ }
+
+ # If skip regions are defined, add them to the data.
+ if (defined $_->{'skips'}) {
+ my $added = 0;
+ foreach my $region (@{$_->{'skips'}}) {
+ if (($region->{'offset'} > 0) or
+ not ($_->{'header'} > 0)) {
+ $debug and printf("Inserted 0x%05X bytes (at offset 0x%05X) into <%s>\n",
+ $region->{'size'}, $region->{'offset'}, $_->{'name'});
+ substr($_->{'data'},
+ $region->{'offset'} + $added - $_->{'header'},
+ 0, $region->{'data'});
+ $added += $region->{'size'};
+ }
+ }
+ }
+
+ # Splice the data into the image at the appropriate place, padding as required.
+ substr($image_buf, $_->{'offset'}, $_->{'size'},
+ $_->{'header'} ?
+ padBytes(pack("N4",length($_->{'data'})).$_->{'data'}, $_->{'size'}) :
+ padBytes($_->{'data'}, $_->{'size'}));
+
+ # Keep the user appraised ...
+ $quiet or printf("Wrote %s (0x%08X to 0x%08X) from <%s> into \"%s\"\n",
+ ($_->{'size'} >= $block_size ?
+ sprintf("%2d blocks", numBlocks($_->{'size'})) :
+ sprintf("0x%05X bytes", $_->{'size'})),
+ $_->{'offset'}, $_->{'offset'}+$_->{'size'}, $_->{'name'}, $filename);
+ }
+
+ # If we are not able to write a partition, then give debug information about why.
+ else {
+ $debug and printf("Skipping <%s> (%s)\n", $_->{'name'},
+ (not defined $_->{'offset'}) ? "no offset defined" :
+ ((not defined $_->{'size'}) ? "no size defined" :
+ "no data available"));
+ }
+
+ } @partitions;
+
+ # Write the image to the specified file.
+ writeOut($image_buf, $filename);
+
+ return;
+}
+
+# checkPartitionTable: sanity check partition table - for testing but might evolve into setting @partitions
+# so that we can write out jffs2 partitions from a read image
+# currently not nearly paranoid enough
+sub checkPartitionTable {
+ my($data) = @_;
+
+ my($pointer) = 0;
+ my($entry);
+
+ my($name, $flash_base, $size, $done, $dummy_long, $padding);
+ do {
+ $entry = substr($data, $pointer, 0x100);
+
+ ($name,$flash_base,$dummy_long,$size,$dummy_long,$dummy_long,$padding,$dummy_long,$dummy_long) = unpack("a16N5x212N2",$entry);
+ $name =~ s/\0//g;
+ $debug and printf("pointer: %d\tname: %s%sflash_base: 0x%08X\tsize: 0x%08X\n",
+ $pointer, $name, (" " x (16 - length($name))), $flash_base, $size);
+ $pointer += 0x100;
+ $debug and printf("terminator: 0x%08X\n", unpack("C", substr($data, $pointer, 1)));
+ if (unpack("C", substr($data, $pointer, 1)) eq 0xff) {
+ $done = 1;
+ }
+ } until $done;
+}
+
+sub printPartitions {
+ my(@partitions) = @_;
+
+ my($offset, $size, $skips);
+ map {
+# defined $_->{'size'} ? $size = $_->{'size'} : $size = undef;
+
+ if (defined $_->{'size'}) {
+ $size = $_->{'size'};
+ }
+ else {
+ $size = undef;
+ }
+ if (defined $_->{'offset'}) {
+ $offset = $_->{'offset'};
+ }
+ else {
+ $offset = undef;
+ }
+ if (defined $_->{'skips'}) {
+ $skips = $_->{'skips'};
+ }
+ else {
+ $skips = undef;
+ }
+ printf("%s%s", $_->{'name'}, (" " x (16 - length($_->{'name'}))));
+ if (defined $offset) { printf("0x%08X\t", $offset); } else { printf("(undefined)\t"); };
+ if (defined $size) { printf("0x%08X", $size); } else { printf("(undefined)"); };
+ if (defined $skips) {
+ printf("\t[%s]",
+ join(", ",
+ map { sprintf("0x%05X/0x%05X", $_->{'offset'}, $_->{'size'}); }
+ @$skips));
+ }
+ printf("\n");
+ } @partitions;
+}
+
+sub defaultPartitions {
+
+ return ({'name'=>'RedBoot', 'file'=>'RedBoot',
+ 'offset'=>0x00000000, 'size'=>0x00040000,
+ 'variable'=>0, 'header'=>0, 'pseudo'=>0, 'data'=>undef, 'byteswap'=>0},
+ {'name'=>'EthAddr', 'file'=>undef,
+ 'offset'=>0x0003ffb0, 'size'=>0x00000006,
+ 'variable'=>0, 'header'=>0, 'pseudo'=>1, 'data'=>undef, 'byteswap'=>0},
+ {'name'=>'SysConf', 'file'=>'SysConf',
+ 'offset'=>0x00040000, 'size'=>0x00020000,
+ 'variable'=>0, 'header'=>0, 'pseudo'=>0, 'data'=>undef, 'byteswap'=>0},
+ {'name'=>'Loader', 'file'=>'apex.bin',
+ 'offset'=>undef, 'size'=>undef,
+ 'variable'=>1, 'header'=>16, 'pseudo'=>0, 'data'=>undef, 'byteswap'=>0},
+ {'name'=>'Kernel', 'file'=>'vmlinuz',
+ 'offset'=>undef, 'size'=>undef,
+ 'variable'=>1, 'header'=>16, 'pseudo'=>0, 'data'=>undef, 'byteswap'=>0},
+ {'name'=>'Ramdisk', 'file'=>'ramdisk.gz',
+ 'offset'=>undef, 'size'=>undef,
+ 'variable'=>1, 'header'=>16, 'pseudo'=>0, 'data'=>undef, 'byteswap'=>0},
+ {'name'=>'FIS directory', 'file'=>undef,
+ 'offset'=>0x007e0000, 'size'=>0x00020000,
+ 'variable'=>0, 'header'=>0, 'pseudo'=>0, 'data'=>undef, 'byteswap'=>0},
+ {'name'=>'Loader config', 'file'=>undef,
+ 'offset'=>0x007f8000, 'size'=>0x00004000,
+ 'variable'=>0, 'header'=>0, 'pseudo'=>1, 'data'=>undef, 'byteswap'=>0},
+ {'name'=>'Microcode', 'file'=>'NPE-B',
+ 'offset'=>0x007fc000, 'size'=>0x00003ff0,
+ 'variable'=>0, 'header'=>16, 'pseudo'=>1, 'data'=>undef, 'byteswap'=>0},
+ {'name'=>'Trailer', 'file'=>'Trailer',
+ 'offset'=>0x007ffff0, 'size'=>0x00000010,
+ 'variable'=>0, 'header'=>0, 'pseudo'=>1, 'data'=>undef, 'byteswap'=>0});
+}
+
+# Main routine starts here ...
+
+my($unpack, $pack, $little, $input, $output, $redboot);
+my($kernel, $sysconf, $ramdisk, $fisdir);
+my($microcode, $trailer, $ethaddr, $loader);
+
+END {
+ # Remove temporary files
+ for my $file (@cleanup) {
+ unlink $file;
+ }
+}
+
+if (!GetOptions("d|debug" => \$debug,
+ "q|quiet" => \$quiet,
+ "u|unpack" => \$unpack,
+ "p|pack" => \$pack,
+ "l|little" => \$little,
+ "i|input=s" => \$input,
+ "o|output=s" => \$output,
+ "b|redboot=s" => \$redboot,
+ "k|kernel=s" => \$kernel,
+ "s|sysconf=s" => \$sysconf,
+ "r|ramdisk=s" => \$ramdisk,
+ "f|fisdir=s" => \$fisdir,
+ "m|microcode=s" => \$microcode,
+ "t|trailer=s" => \$trailer,
+ "e|ethaddr=s" => \$ethaddr,
+ "L|loader=s" => \$loader,
+ ) or (not defined $pack and not defined $unpack)) {
+ print "Usage: slugimage <options>\n";
+ print "\n";
+ print " [-d|--debug] Turn on debugging output\n";
+ print " [-q|--quiet] Turn off status messages\n";
+ print " [-u|--unpack] Unpack a firmware image\n";
+ print " [-p|--pack] Pack a firmware image\n";
+ print " [-l|--little] Convert Kernel and Ramdisk to little-endian\n";
+ print " [-i|--input] <file> Input firmware image filename\n";
+ print " [-o|--output] <file> Output firmware image filename\n";
+ print " [-b|--redboot] <file> Input/Output RedBoot filename\n";
+ print " [-s|--sysconf] <file> Input/Output SysConf filename\n";
+ print " [-L|--loader] <file> Second stage boot loader filename\n";
+ print " [-k|--kernel] <file> Input/Ouptut Kernel filename\n";
+ print " [-r|--ramdisk] <file> Input/Output Ramdisk filename(s)\n";
+ print " [-f|--fisdir] <file> Input/Output FIS directory filename\n";
+ print " [-m|--microcode] <file> Input/Output Microcode filename\n";
+ print " [-t|--trailer] <file> Input/Output Trailer filename\n";
+ print " [-e|--ethaddr] <AABBCCDDEEFF> Set the Ethernet address\n";
+
+ # %%% TODO %%% Document --ramdisk syntax
+
+ exit 1;
+}
+
+my(@partitions) = defaultPartitions();
+
+if ($pack) {
+ die "Output filename must be specified\n" unless defined $output;
+
+ # If we're creating an image and no RedBoot, SysConf partition is
+ # explicitly specified, simply write an empty one as the upgrade tools
+ # don't touch RedBoot and SysConf anyway. If no Trailer is specified,
+ # put in one.
+ if (not defined $redboot and not -e "RedBoot") {
+ $redboot = tmpnam();
+ open TMP, ">$redboot" or die "Cannot open file $redboot: $!";
+ push @cleanup, $redboot;
+ # The RedBoot partition is 256 * 1024 = 262144; the trailer we add
+ # is 70 bytes.
+ print TMP "\0"x(262144-70);
+ # Upgrade tools check for an appropriate Sercomm trailer.
+ for my $i (@sercomm_redboot_trailer) {
+ print TMP pack "S", $i;
+ }
+ close TMP;
+ }
+ if (not defined $sysconf and not -e "SysConf") {
+ $sysconf = tmpnam();
+ open TMP, ">$sysconf" or die "Cannot open file $sysconf: $!";
+ push @cleanup, $sysconf;
+ # The SysConf partition is 128 * 1024 = 131072
+ print TMP "\0"x131072;
+ close TMP;
+ }
+ if (not defined $trailer and not -e "Trailer") {
+ $trailer = tmpnam();
+ open TMP, ">$trailer" or die "Cannot open file $trailer: $!";
+ push @cleanup, $trailer;
+ for my $i (@sercomm_flash_trailer) {
+ print TMP pack "S", $i;
+ }
+ close TMP;
+ }
+
+ # If the microcode was not specified, then don't complain that it's missing.
+ if (not defined $microcode and not -e "NPE-B") {
+ map { ($_->{'name'} eq 'Microcode') && ($_->{'file'} = undef); } @partitions;
+ }
+}
+
+# Go through the partition options, and set the names and files in @partitions
+if (defined $redboot) { map { ($_->{'name'} eq 'RedBoot') && ($_->{'file'} = $redboot); } @partitions; }
+if (defined $sysconf) { map { ($_->{'name'} eq 'SysConf') && ($_->{'file'} = $sysconf); } @partitions; }
+if (defined $loader) { map { ($_->{'name'} eq 'Loader') && ($_->{'file'} = $loader); } @partitions; }
+if (defined $kernel) { map { ($_->{'name'} eq 'Kernel') && ($_->{'file'} = $kernel); } @partitions; }
+if (defined $fisdir) { map { ($_->{'name'} eq 'FIS directory') && ($_->{'file'} = $fisdir); } @partitions; }
+if (defined $microcode) { map { ($_->{'name'} eq 'Microcode') && ($_->{'file'} = $microcode); } @partitions; }
+if (defined $trailer) { map { ($_->{'name'} eq 'Trailer') && ($_->{'file'} = $trailer); } @partitions; }
+
+if (defined $little) {
+ map {
+ if (($_->{'name'} eq 'Loader') or
+ ($_->{'name'} eq 'Kernel') or
+ ($_->{'name'} eq 'Ramdisk')) {
+ $_->{'byteswap'} = 1;
+ }
+ } @partitions;
+}
+
+if (defined $ethaddr) {
+ map {
+ if ($_->{'name'} eq 'EthAddr') {
+ $ethaddr =~ s/://g;
+ if (($ethaddr !~ m/^[0-9A-Fa-f]+$/) or (length($ethaddr) != 12)) {
+ die "Invalid ethernet address specification: '".$ethaddr."'\n";
+ }
+ $_->{'data'} = pack("H12", $ethaddr);
+ }
+ } @partitions;
+}
+
+if (defined $ramdisk) {
+
+ # A single filename is used for the ramdisk filename
+ if ($ramdisk !~ m/[:,]/) {
+ map { ($_->{'name'} eq 'Ramdisk') && ($_->{'file'} = $ramdisk); } @partitions;
+ }
+
+ # otherwise, it's a list of name:file mappings
+ else {
+ my @mappings = split(',', $ramdisk);
+
+ # Find the index of the Ramdisk entry
+ my $index;
+ my $count = 0;
+ map {
+ if (not defined $index) {
+ if ($_->{'name'} eq "Ramdisk") {
+ $index = $count;
+ }
+ $count++;
+ }
+ } @partitions;
+
+ defined $index or die "Cannot find the Ramdisk partition\n";
+
+ # Replace the Ramdisk entry with the new mappings
+ splice(@partitions, $index, 1, map {
+
+ # Preserve the information from the ramdisk entry
+ my %entry = %{$partitions[$index]};
+
+ # Parse the mapping
+ ($_ =~ m/^([^:]+):([^:]+)(:([^:]+))?$/) or die "Invalid syntax in --ramdisk\n";
+ $entry{'name'} = $1; $entry{'file'} = $2; my $size = $4;
+
+ # If the mapping is not for the ramdisk, then undefine its attributes
+ if ($entry{'name'} ne 'Ramdisk') {
+ $entry{'offset'} = undef;
+ $entry{'size'} = undef;
+ $entry{'variable'} = 1;
+ $entry{'header'} = 0;
+ $entry{'pseudo'} = 0;
+ $entry{'data'} = undef;
+ $entry{'byteswap'} = 0;
+ }
+
+ # Support specification of the number of blocks for empty jffs2
+ if ($entry{'file'} =~ m/^[0-9]+$/) {
+ $size = $entry{'file'};
+ $entry{'file'} = undef;
+ }
+
+ # If the user has specified a size, then respect their wishes
+ if (defined $size) {
+ $entry{'size'} = $size * $block_size;
+ # Create an empty partition of the requested size.
+ $entry{'data'} = padBytes("", $entry{'size'});
+ if ($entry{'header'}) {
+ $entry{'data'} = padBytes("", $entry{'size'} - $entry{'header'});
+ }
+ }
+
+ \%entry;
+
+ } @mappings);
+ }
+}
+
+# Read in the firmware image
+if ($input) {
+ if ($debug) {
+ print "Initial partition map:\n";
+ printPartitions(@partitions);
+ }
+
+ my $result = readInFirmware($input, \@partitions);
+
+ if ($debug) {
+ print "After reading firmware:\n";
+ printPartitions(@partitions);
+ }
+}
+
+# Unpack the firmware if requested
+if ($unpack) {
+ die "Input filename must be specified\n" unless defined $input;
+
+# map {
+# ($_->{'name'} eq 'FIS directory') and @partitions = checkPartitionTable($_->{'data'});
+# } @partitions;
+
+ writeOutFirmwareParts(@partitions);
+
+}
+
+# Pack the firmware if requested
+if ($pack) {
+
+ if (!defined $loader) {
+ removeOptionalLoader(\@partitions);
+ }
+
+ if ($debug) {
+ print "Initial partition map:\n";
+ printPartitions(@partitions);
+ }
+
+ my $result = readInFirmwareParts(@partitions);
+
+ if ($debug) {
+ print "after readInFirmwareParts():\n";
+ printPartitions(@partitions);
+# map {
+# ($_->{'name'} eq 'RedBoot') && (printRedbootTrailer($_->{'data'}));
+# } @partitions;
+ }
+
+ layoutPartitions(@partitions);
+
+ if ($debug) {
+ print "after layoutPartitions():\n";
+ printPartitions(@partitions);
+ }
+
+ buildPartitionTable(@partitions);
+
+ if ($debug) {
+ print "after buildPartitionTable():\n";
+ printPartitions(@partitions);
+
+# my($lastblock);
+# map {
+# if ($_->{'name'} eq 'FIS directory') {
+# $lastblock = $_->{'data'};
+# }
+# } @partitions;
+
+# print "checkPartitionTable():\n";
+# checkPartitionTable($lastblock);
+ }
+
+ writeOutFirmware($output, @partitions);
+
+}
+
+exit 0;