finally move buildroot-ng to trunk

1 files changed, 492 insertions, 0 deletions

diff --git a/target/linux/Config.in b/target/linux/Config.in
new file mode 100644
index 0000000..20099fe
--- /dev/null
+++ b/target/linux/Config.in
@@ -0,0 +1,492 @@
+menu "Kernel Configuration / Device Support"
+
+comment "Device specific configuration"
+
+source "target/linux/*-2.[46]/Config.in"
+
+comment "Kernel modules"
+
+menu "Networking modules"
+
+config PACKAGE_KMOD_ATM
+	prompt "kmod-atm.......................... ATM support"
+	tristate
+	default y if LINUX_2_4_AR7
+	default m
+	help
+	  ATM support
+
+config PACKAGE_KMOD_IPIP
+	prompt "kmod-ipip......................... IP in IP encapsulation support"
+	tristate
+	default m
+	help
+	  Kernel module for IP in IP encapsulation
+
+config PACKAGE_KMOD_RING
+	prompt "kmod-ring......................... PF Ring"
+	tristate
+	default m
+	help
+	  PF Ring
+
+config PACKAGE_KMOD_TUN
+	prompt "kmod-tun.......................... Universal TUN/TAP driver"
+	tristate
+	default m
+	help
+	  Kernel support for the TUN/TAP tunneling device
+
+endmenu
+
+menu "Block devices support"
+
+config PACKAGE_kmod-ide-core
+	prompt "kmod-ide-core..................... IDE support"
+	tristate
+	default m
+	depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
+	help
+	  Kernel modules for IDE support
+	  useful for usb mass storage devices (e.g. on WL-HDD)
+	  
+	  Includes:
+	    - ide-core
+	    - ide-detect
+	    - ide-disk
+
+config PACKAGE_kmod-ide-pdc202xx
+	prompt "kmod-ide-pdc202xx................. PDC202xx driver"
+	tristate
+	default m
+	depends PACKAGE_kmod-ide-core
+	depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
+	help
+	  Kernel modules for IDE support
+	  useful for usb mass storage devices (e.g. on WL-HDD)
+	  
+	  Includes:
+	    - ide-core
+	    - ide-detect
+	    - ide-disk
+
+config PACKAGE_KMOD_LOOP
+	prompt "kmod-loop......................... Loop mount support"
+	tristate
+	default m
+	help
+	  Kernel module for loop mount support
+
+config PACKAGE_KMOD_NBD
+	prompt "kmod-nbd.......................... Network Block Device"
+	tristate
+	default m
+	help
+	  Kernel module for network block device
+
+endmenu
+
+menu "Filesystems support"
+
+config PACKAGE_KMOD_FS_CIFS
+	prompt "kmod-fs-cifs...................... CIFS support"
+	tristate
+	default m
+	help
+	  Kernel modules for CIFS support
+
+config PACKAGE_KMOD_FS_EXT2
+	prompt "kmod-fs-ext2...................... EXT2 filesystem support"
+	tristate
+	default m
+	help
+	  Kernel modules for EXT2 filesystem support
+
+config PACKAGE_KMOD_FS_EXT3
+	prompt "kmod-fs-ext3...................... EXT3 filesystem support"
+	tristate
+	default m
+	help
+	  Kernel modules for EXT3 filesystem support
+
+config PACKAGE_KMOD_FS_HFSPLUS
+	prompt "kmod-fs-hfsplus................... HFS+ filesystem support"
+	tristate
+	default m
+	help
+	  Kernel modules for HFS+ filesystem support
+
+config PACKAGE_KMOD_FS_NFS
+	prompt "kmod-fs-nfs....................... NFS support"
+	tristate
+	default m
+	help
+	  Kernel modules for NFS support
+	  Includes lockd, nfs and sunrpc
+
+config PACKAGE_KMOD_FS_VFAT
+	prompt "kmod-fs-vfat...................... VFAT filesystem support"
+	tristate
+	default m
+	help
+	  Kernel modules for VFAT filesystem support
+	  useful for usb mass storage devices
+
+config PACKAGE_KMOD_FS_XFS
+	prompt "kmod-fs-xfs....................... XFS filesystem support"
+	tristate
+	default m
+	help
+	  Kernel modules for XFS filesystem support
+
+endmenu
+
+menu "Multimedia devices support"
+
+config PACKAGE_KMOD_PWC
+	prompt "kmod-pwc.......................... Kernel driver for USB Philips Cameras"
+	tristate
+	depends PACKAGE_KMOD_USB
+	default m
+
+config PACKAGE_KMOD_SOUNDCORE
+	prompt "kmod-soundcore.................... Soundcard support"
+	tristate
+	default n
+	help
+	  Base support for soundcards
+	  Requires either USB soundcard support (OSS) or ALSA package to be useful
+
+config PACKAGE_KMOD_VIDEODEV
+	prompt "kmod-videodev..................... Video (For Linux) kernel support"
+	tristate
+	default m
+
+endmenu
+
+menu "Native Language support"
+
+config PACKAGE_KMOD_NLS_BASE
+	prompt "kmod-nls-base..................... Native Language support"
+	tristate
+	default m
+	help
+	  Kernel native language support
+
+config PACKAGE_KMOD_NLS_CP437
+	prompt   "kmod-nls-cp437.................. Codepage 437 (United States, Canada)"
+	tristate
+	default m
+	depends PACKAGE_KMOD_NLS_BASE
+	help
+	  Kernel native language support
+
+config PACKAGE_KMOD_NLS_CP850
+	prompt   "kmod-nls-cp850.................. Codepage 850 (Europe)"
+	tristate
+	default m
+	depends PACKAGE_KMOD_NLS_BASE
+	help
+	  Kernel native language support
+
+config PACKAGE_KMOD_NLS_ISO8859_1
+	prompt   "kmod-nls-iso8859-1.............. NLS ISO 8859-1 (Latin 1; Western European Languages)"
+	tristate
+	default m
+	depends PACKAGE_KMOD_NLS_BASE
+	help
+	  Kernel native language support
+
+config PACKAGE_KMOD_NLS_ISO8859_15
+	prompt   "kmod-nls-iso8859-15............. NLS ISO 8859-15 (Latin 15; Western European Languages with Euro)"
+	tristate
+	default m
+	depends PACKAGE_KMOD_NLS_BASE
+	help
+	  Kernel native language support
+
+config PACKAGE_KMOD_NLS_UTF8
+	prompt   "kmod-nls-utf8................... NLS UTF8"
+	tristate
+	default m
+	depends PACKAGE_KMOD_NLS_BASE
+	help
+	  Kernel native language support
+
+endmenu
+
+menu "Network devices support"
+	depends LINUX_2_4_X86 || LINUX_2_6_X86
+
+
+config PACKAGE_KMOD_NET_AIRO
+	prompt "kmod-net-airo..................... Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support"
+	tristate
+	depends LINUX_2_4_X86 || LINUX_2_6_X86
+	default m
+	help
+	  This is the standard Linux driver to support Cisco/Aironet ISA and 
+	  PCI 802.11 wireless cards.
+	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X 
+	  - with or without encryption) as well as card before the Cisco 
+	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+	  
+	  This driver support both the standard Linux Wireless Extensions 
+	  and Cisco proprietary API, so both the Linux Wireless Tools and the 
+	  Cisco Linux utilities can be used to configure the card.
+
+
+config PACKAGE_KMOD_NET_HERMES
+	prompt "kmod-net-hermes................... Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support"
+	tristate
+	depends LINUX_2_4_X86 || LINUX_2_6_X86
+	default m
+	help
+	  A driver for 802.11b wireless cards based based on the "Hermes" or 
+	  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast 
+	  majority of the PCMCIA 802.11b cards (which are nearly all rebadges) 
+	  - except for the Cisco/Aironet cards.  Cards supported include the 
+	  Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, 
+	  Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, 
+	  IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear 
+	  MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel 
+	  PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+
+config PACKAGE_KMOD_NET_HERMES_PCI
+	prompt   "kmod-net-hermes-pci............. Intersil Prism 2.5 PCI 802.11b adaptor support"
+	tristate
+	default m
+	depends PACKAGE_KMOD_NET_HERMES
+	help
+	  Enable support for PCI and mini-PCI 802.11b wireless NICs based on 
+	  the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b 
+	  PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also 
+	  common.  Some of the built-in wireless adaptors in laptops are of 
+	  this variety.
+
+config PACKAGE_KMOD_NET_HERMES_PLX
+	prompt   "kmod-net-hermes-plx............. Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support"
+	tristate
+	default m
+	depends PACKAGE_KMOD_NET_HERMES
+	help
+	  Enable support for PCMCIA cards supported by the "Hermes" (aka 
+	  orinoco_cs) driver when used in PLX9052 based PCI adaptors.  These 
+	  adaptors are not a full PCMCIA controller but act as a more limited 
+	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that 
+	  802.11b PCMCIA cards can be used in desktop machines.  The Netgear 
+	  MA301 is such an adaptor.
+
+
+
+config PACKAGE_KMOD_NET_PRISM54
+	prompt "kmod-net-prism54.................. Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support"
+	tristate
+	depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
+	default m
+	help
+	  Enable PCI and Cardbus support for the following chipset based cards: 
+	  
+	   * ISL3880 - Prism GT       802.11 b/g
+	   * ISL3877 - Prism Indigo   802.11 a
+	   * ISL3890 - Prism Duette   802.11 a/b/g
+	  
+	  For a complete list of supported cards visit <http://prism54.org>.
+	  Here is the latest confirmed list of supported cards: 
+	  
+	   * 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+	   * Allnet ALL0271 PCI Card
+	   * Compex WL54G Cardbus Card
+	   * Corega CG-WLCB54GT Cardbus Card
+	   * D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
+	   * I-O Data WN-G54/CB Cardbus Card
+	   * Kobishi XG-300 aka Z-Com Cardbus Card
+	   * Netgear WG511 Cardbus Card
+	   * Ovislink WL-5400PCI PCI Card
+	   * Peabird WLG-PCI PCI Card
+	   * Sitecom WL-100i Cardbus Card
+	   * Sitecom WL-110i PCI Card
+	   * SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
+	   * SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+	   * Z-Com XG-900 PCI Card
+	   * Zyxel G-100 Cardbus Card
+	  
+	  If you enable this, you require a firmware file as well.
+	  You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
+	  You can get this non-GPL'd firmware file from the Prism54 project page: 
+	  <http://prism54.org>.
+	  
+	  Note: You need a motherboard with DMA support to use any of these cards.
+
+endmenu
+
+menu "PCMCIA/CardBus support"
+	depends PCMCIA_SUPPORT
+
+config PACKAGE_KMOD_PCMCIA_CORE
+	prompt "kmod-pcmcia-core.................. PCMCIA/CardBus support"
+	tristate
+	default m
+
+config PACKAGE_KMOD_PCMCIA_SERIAL
+	prompt   "kmod-pcmcia-serial.............. PCMCIA/CardBus serial device support"
+	tristate
+	default m
+	depends PACKAGE_KMOD_PCMCIA_CORE
+
+endmenu
+
+menu "USB support"
+	depends USB_SUPPORT
+
+config PACKAGE_KMOD_USB
+	prompt "kmod-usb-core..................... USB support"
+	tristate
+	default m
+
+config PACKAGE_KMOD_USB_UHCI 
+	prompt   "kmod-usb-uhci................... Support for UHCI controllers"
+	tristate
+	default n if LINUX_2_6_AU1000
+	depends PACKAGE_KMOD_USB
+	select PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB_OHCI
+	prompt   "kmod-usb-ohci................... Support for OHCI controllers"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB
+	select PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB2
+	prompt   "kmod-usb2....................... Support for USB 2.0 controllers"
+	tristate
+	default n if LINUX_2_6_AU1000
+	depends PACKAGE_KMOD_USB
+	select PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB_CONTROLLER
+	tristate
+	depends on PACKAGE_KMOD_USB_UHCI || PACKAGE_KMOD_USB_OHCI || PACKAGE_KMOD_USB2
+	default n
+
+config PACKAGE_KMOD_USB_ACM
+	prompt "kmod-usb-acm...................... Support for USB modems/isdn controllers"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB_AUDIO
+	prompt "kmod-usb-audio.................... Support for USB soundcards"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_CONTROLLER
+	select PACKAGE_KMOD_SOUNDCORE
+
+config PACKAGE_KMOD_USB_PRINTER
+	prompt "kmod-usb-printer.................. Support for USB printers"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB_SERIAL
+	prompt "kmod-usb-serial................... Support for USB-to-serial converters"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB_SERIAL_BELKIN
+	prompt   "kmod-usb-serial-belkin.......... Support for Belkin USB-to-serial converters"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_SERIAL
+
+config PACKAGE_KMOD_USB_SERIAL_FTDI
+	prompt   "kmod-usb-serial-ftdi............ Support for FTDI USB-to-serial converterr"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_SERIAL
+
+config PACKAGE_KMOD_USB_SERIAL_MCT_U232
+	prompt   "kmod-usb-serial-mct-u232........ Support for Magic Control Technology USB-to-Serial converters"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_SERIAL
+
+config PACKAGE_KMOD_USB_SERIAL_PL2303
+	prompt   "kmod-usb-serial-pl2303.......... Support for Prolific PL2303 USB-to-Serial converters"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_SERIAL
+
+config PACKAGE_KMOD_USB_SERIAL_VISOR
+	prompt   "kmod-usb-serial-visor........... Support for Handspring Visor / Palm m50x / Sony Clie Driver"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_SERIAL
+
+config PACKAGE_KMOD_USB_STORAGE
+	prompt "kmod-usb-storage.................. Support for USB storage devices"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB_ATM
+        prompt "kmod-usb-atm...................... Support for USB ATM devices"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB_ATM_SPEEDTOUCH
+        prompt   "kmod-usb-atm-speedtouch......... Support for USB Speedtouch ADSL modem"
+	tristate
+	default m
+	depends PACKAGE_KMOD_USB_ATM
+
+endmenu
+
+menu "Misc. devices support"
+
+config PACKAGE_KMOD_AX25
+	prompt "kmod-ax25......................... AX25 support"
+	tristate
+	default m
+	help
+	  Kernel modules for AX25 protocol family
+	  
+	  This package contains both the AX25 layer 2 support (ax25) and AX25 KISS driver (mkiss)
+
+config PACKAGE_KMOD_BLUETOOTH
+	prompt "kmod-bluetooth.................... Bluetooth drivers and network stack"
+	tristate
+	depends PCI_SUPPORT || USB_SUPPORT
+	default m
+	help
+	  Bluetooth drivers and network stack
+
+config PACKAGE_KMOD_LP
+	prompt "kmod-lp........................... Parallel port and lp support"
+	tristate
+	default m
+	help
+	  Kernel modules for line printer and parallel port support
+
+config PACKAGE_KMOD_SOFTDOG
+	prompt "kmod-softdog...................... Software watchdog"
+	tristate
+	default m
+	help
+	  Kernel modules for software watchdog driver
+
+config PACKAGE_KMOD_WD1100
+	prompt "kmod-wd1100....................... Soekris net4801 watchdog"
+	tristate
+	default y
+	depends LINUX_2_4_X86
+	help
+	  Driver for the NatSemi SC1x00 series Watchdog 
+	  found on Soekris net4801 boards
+
+endmenu
+
+endmenu