refactor kernel code (part 1), mark it as broken now

SVN-Revision: 7916

13 files changed, 164 insertions, 128 deletions

diff --git a/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch b/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
index da601b9..71db5fd 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
@@ -1,14 +1,15 @@
-Index: linux-2.6.22-rc6/arch/mips/Kconfig
+Index: linux-2.6.22/arch/mips/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/Kconfig
-+++ linux-2.6.22-rc6/arch/mips/Kconfig
-@@ -15,6 +15,17 @@ choice
+--- linux-2.6.22.orig/arch/mips/Kconfig
++++ linux-2.6.22/arch/mips/Kconfig
+@@ -15,6 +15,18 @@ choice
  	prompt "System type"
  	default SGI_IP22
  
 +config MIPS_ADM5120
 +	bool "Support for ADM5120 SoC"
 +	select SYS_HAS_CPU_MIPS32_R1
++	select SYS_HAS_EARLY_PRINTK
 +	select DMA_NONCOHERENT
 +	select HW_HAS_PCI
 +	select IRQ_CPU
@@ -20,7 +21,7 @@ Index: linux-2.6.22-rc6/arch/mips/Kconfig
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
  
-@@ -658,6 +669,7 @@ config TOSHIBA_RBTX4938
+@@ -658,6 +670,7 @@ config TOSHIBA_RBTX4938
  
  endchoice
  
@@ -28,18 +29,20 @@ Index: linux-2.6.22-rc6/arch/mips/Kconfig
  source "arch/mips/au1000/Kconfig"
  source "arch/mips/ddb5xxx/Kconfig"
  source "arch/mips/gt64120/ev64120/Kconfig"
-Index: linux-2.6.22-rc6/arch/mips/Makefile
+Index: linux-2.6.22/arch/mips/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/Makefile
-+++ linux-2.6.22-rc6/arch/mips/Makefile
-@@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
+--- linux-2.6.22.orig/arch/mips/Makefile
++++ linux-2.6.22/arch/mips/Makefile
+@@ -165,6 +165,16 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
  #
 +# ADMtek 5120
 +#
 +
++libs-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/prom/
 +core-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/
++core-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/boards/
 +cflags-$(CONFIG_MIPS_ADM5120)	+= -Iinclude/asm-mips/mach-adm5120
 +load-$(CONFIG_MIPS_ADM5120)	+= 0xffffffff80001000
 +
@@ -47,10 +50,10 @@ Index: linux-2.6.22-rc6/arch/mips/Makefile
  # Common Alchemy Au1x00 stuff
  #
  core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
-Index: linux-2.6.22-rc6/include/asm-mips/bootinfo.h
+Index: linux-2.6.22/include/asm-mips/bootinfo.h
 ===================================================================
---- linux-2.6.22-rc6.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.22-rc6/include/asm-mips/bootinfo.h
+--- linux-2.6.22.orig/include/asm-mips/bootinfo.h
++++ linux-2.6.22/include/asm-mips/bootinfo.h
 @@ -213,6 +213,57 @@
  #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
  #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
@@ -59,7 +62,7 @@ Index: linux-2.6.22-rc6/include/asm-mips/bootinfo.h
 + * Valid machtype for group ADMtek ADM5120
 + */
 +#define MACH_GROUP_ADM5120	26
-+#define MACH_ADM5120_UNKNOWN	0	/* Unknown board */
++#define MACH_ADM5120_GENERIC	0	/* Generic board */
 +#define MACH_ADM5120_WP54G_WRT	1	/* Compex WP54G-WRT */
 +#define MACH_ADM5120_WP54G	2	/* Compex WP54G */
 +#define MACH_ADM5120_WP54AG	3	/* Compex WP54AG */
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch
index 355c126..b84a62c 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch
@@ -1,27 +1,26 @@
-Index: linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
+Index: linux-2.6.22/drivers/mtd/maps/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/maps/Kconfig
-@@ -620,5 +620,10 @@ config MTD_PLATRAM
+--- linux-2.6.22.orig/drivers/mtd/maps/Kconfig
++++ linux-2.6.22/drivers/mtd/maps/Kconfig
+@@ -620,5 +620,9 @@ config MTD_PLATRAM
  
  	  This selection automatically selects the map_ram driver.
  
 +config MTD_ADM5120
-+	tristate "Map driver for ADMtek ADM5120 boards"
++	tristate "Map driver for ADM5120 based boards"
 +	depends on MIPS_ADM5120
-+	select MTD_CFI_AMDSTD
 +
  endmenu
  
-Index: linux-2.6.22-rc6/drivers/mtd/maps/Makefile
+Index: linux-2.6.22/drivers/mtd/maps/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/maps/Makefile
+--- linux-2.6.22.orig/drivers/mtd/maps/Makefile
++++ linux-2.6.22/drivers/mtd/maps/Makefile
 @@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
  obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
  obj-$(CONFIG_MTD_PCI)		+= pci.o
  obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120)      	+= adm5120_mtd.o
++obj-$(CONFIG_MTD_ADM5120)      	+= adm5120-flash.o
  obj-$(CONFIG_MTD_LASAT)		+= lasat.o
  obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
  obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch
index 9dde782..83c1ff9 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/net/Kconfig
+Index: linux-2.6.22/drivers/net/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/net/Kconfig
-+++ linux-2.6.22-rc6/drivers/net/Kconfig
+--- linux-2.6.22.orig/drivers/net/Kconfig
++++ linux-2.6.22/drivers/net/Kconfig
 @@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
@@ -13,10 +13,10 @@ Index: linux-2.6.22-rc6/drivers/net/Kconfig
  config NET_SB1250_MAC
  	tristate "SB1250 Ethernet support"
  	depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
-Index: linux-2.6.22-rc6/drivers/net/Makefile
+Index: linux-2.6.22/drivers/net/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/net/Makefile
-+++ linux-2.6.22-rc6/drivers/net/Makefile
+--- linux-2.6.22.orig/drivers/net/Makefile
++++ linux-2.6.22/drivers/net/Makefile
 @@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_uart.patch
index eb78e03..089221e 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_uart.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_uart.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/serial/Makefile
+Index: linux-2.6.22/drivers/serial/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/serial/Makefile
-+++ linux-2.6.22-rc6/drivers/serial/Makefile
+--- linux-2.6.22.orig/drivers/serial/Makefile
++++ linux-2.6.22/drivers/serial/Makefile
 @@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) 
  obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
  obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
@@ -10,10 +10,10 @@ Index: linux-2.6.22-rc6/drivers/serial/Makefile
  obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
  obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
  obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-Index: linux-2.6.22-rc6/include/linux/serial_core.h
+Index: linux-2.6.22/include/linux/serial_core.h
 ===================================================================
---- linux-2.6.22-rc6.orig/include/linux/serial_core.h
-+++ linux-2.6.22-rc6/include/linux/serial_core.h
+--- linux-2.6.22.orig/include/linux/serial_core.h
++++ linux-2.6.22/include/linux/serial_core.h
 @@ -143,6 +143,9 @@
  #define PORT_KS8695	76
  
@@ -24,10 +24,10 @@ Index: linux-2.6.22-rc6/include/linux/serial_core.h
  #ifdef __KERNEL__
  
  #include <linux/compiler.h>
-Index: linux-2.6.22-rc6/drivers/serial/Kconfig
+Index: linux-2.6.22/drivers/serial/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/serial/Kconfig
-+++ linux-2.6.22-rc6/drivers/serial/Kconfig
+--- linux-2.6.22.orig/drivers/serial/Kconfig
++++ linux-2.6.22/drivers/serial/Kconfig
 @@ -270,6 +270,22 @@ config SERIAL_8250_RM9K
  
  comment "Non-8250 serial port support"
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch
index c862f90..06734a1 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/usb/core/hub.c
+Index: linux-2.6.22/drivers/usb/core/hub.c
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/core/hub.c
-+++ linux-2.6.22-rc6/drivers/usb/core/hub.c
+--- linux-2.6.22.orig/drivers/usb/core/hub.c
++++ linux-2.6.22/drivers/usb/core/hub.c
 @@ -464,7 +464,7 @@ void usb_hub_tt_clear_buffer (struct usb
  			: (USB_ENDPOINT_XFER_BULK << 11);
  	if (usb_pipein (pipe))
@@ -182,21 +182,21 @@ Index: linux-2.6.22-rc6/drivers/usb/core/hub.c
  re_enumerate:
  	hub_port_logical_disconnect(parent_hub, port1);
  	return -ENODEV;
-Index: linux-2.6.22-rc6/drivers/usb/host/Kconfig
+Index: linux-2.6.22/drivers/usb/host/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.22-rc6/drivers/usb/host/Kconfig
-@@ -224,3 +224,6 @@ config USB_SL811_CS
+--- linux-2.6.22.orig/drivers/usb/host/Kconfig
++++ linux-2.6.22/drivers/usb/host/Kconfig
+@@ -237,3 +237,6 @@ config USB_SL811_CS
  	  To compile this driver as a module, choose M here: the
  	  module will be called "sl811_cs".
  
 +config USB_ADM5120_HCD
 +	tristate "ADM5120 HCD support"
 +	depends on USB && MIPS_ADM5120
-Index: linux-2.6.22-rc6/drivers/usb/host/Makefile
+Index: linux-2.6.22/drivers/usb/host/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/host/Makefile
-+++ linux-2.6.22-rc6/drivers/usb/host/Makefile
+--- linux-2.6.22.orig/drivers/usb/host/Makefile
++++ linux-2.6.22/drivers/usb/host/Makefile
 @@ -8,6 +8,7 @@ endif
  
  obj-$(CONFIG_PCI)		+= pci-quirks.o
@@ -205,10 +205,10 @@ Index: linux-2.6.22-rc6/drivers/usb/host/Makefile
  obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
  obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
  obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
-Index: linux-2.6.22-rc6/drivers/usb/Kconfig
+Index: linux-2.6.22/drivers/usb/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/Kconfig
-+++ linux-2.6.22-rc6/drivers/usb/Kconfig
+--- linux-2.6.22.orig/drivers/usb/Kconfig
++++ linux-2.6.22/drivers/usb/Kconfig
 @@ -88,8 +88,6 @@ source "drivers/usb/storage/Kconfig"
  
  source "drivers/usb/image/Kconfig"
@@ -218,10 +218,10 @@ Index: linux-2.6.22-rc6/drivers/usb/Kconfig
  comment "USB port drivers"
  	depends on USB
  
-Index: linux-2.6.22-rc6/drivers/usb/Makefile
+Index: linux-2.6.22/drivers/usb/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/usb/Makefile
-+++ linux-2.6.22-rc6/drivers/usb/Makefile
+--- linux-2.6.22.orig/drivers/usb/Makefile
++++ linux-2.6.22/drivers/usb/Makefile
 @@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
  obj-$(CONFIG_USB_SL811_HCD)	+= host/
  obj-$(CONFIG_USB_U132_HCD)	+= host/
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch b/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch
index 91ca638..c7c6561 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/leds/Kconfig
+Index: linux-2.6.22/drivers/leds/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/leds/Kconfig
-+++ linux-2.6.22-rc6/drivers/leds/Kconfig
+--- linux-2.6.22.orig/drivers/leds/Kconfig
++++ linux-2.6.22/drivers/leds/Kconfig
 @@ -20,6 +20,27 @@ config LEDS_CLASS
  
  comment "LED drivers"
@@ -30,10 +30,10 @@ Index: linux-2.6.22-rc6/drivers/leds/Kconfig
  config LEDS_CORGI
  	tristate "LED Support for the Sharp SL-C7x0 series"
  	depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.22-rc6/drivers/leds/Makefile
+Index: linux-2.6.22/drivers/leds/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/leds/Makefile
-+++ linux-2.6.22-rc6/drivers/leds/Makefile
+--- linux-2.6.22.orig/drivers/leds/Makefile
++++ linux-2.6.22/drivers/leds/Makefile
 @@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
  obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
  
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch
index 18839cf..3fe345e 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch
@@ -1,17 +1,17 @@
-Index: linux-2.6.22-rc6/arch/mips/pci/Makefile
+Index: linux-2.6.22/arch/mips/pci/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/pci/Makefile
-+++ linux-2.6.22-rc6/arch/mips/pci/Makefile
+--- linux-2.6.22.orig/arch/mips/pci/Makefile
++++ linux-2.6.22/arch/mips/pci/Makefile
 @@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
  obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
  obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
  obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 +obj-$(CONFIG_PCI_ADM5120)	+= fixup-adm5120.o ops-adm5120.o pci-adm5120.o
-Index: linux-2.6.22-rc6/include/linux/pci_ids.h
+Index: linux-2.6.22/include/linux/pci_ids.h
 ===================================================================
---- linux-2.6.22-rc6.orig/include/linux/pci_ids.h
-+++ linux-2.6.22-rc6/include/linux/pci_ids.h
-@@ -1712,6 +1712,9 @@
+--- linux-2.6.22.orig/include/linux/pci_ids.h
++++ linux-2.6.22/include/linux/pci_ids.h
+@@ -1713,6 +1713,9 @@
  #define PCI_VENDOR_ID_ESDGMBH		0x12fe
  #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
  
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_hardware_swab.patch b/target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_hardware_swab.patch
deleted file mode 100644
index c0fd645..0000000
--- a/target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_hardware_swab.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-Index: linux-2.6.22-rc6/include/asm-mips/byteorder.h
-===================================================================
---- linux-2.6.22-rc6.orig/include/asm-mips/byteorder.h
-+++ linux-2.6.22-rc6/include/asm-mips/byteorder.h
-@@ -58,6 +58,35 @@ static __inline__ __attribute_const__ __
- 
- #endif /* CONFIG_CPU_MIPSR2 */
- 
-+#ifdef CONFIG_ADM5120_HARDWARE_SWAB
-+
-+static __inline__ __attribute_const__ __u16 ___adm5120__swab16(__u16 x)
-+{
-+	__asm__ (
-+	"	sh	%2, 0xCA(%1)			\n"
-+	"	lhu	%0, 0xCC(%1)			\n"
-+	: "=r" (x)
-+	: "r" (0xB2000000), "r" (x));
-+
-+	return x;
-+}
-+
-+static __inline__ __attribute_const__ __u32 ___adm5120__swab32(__u32 x)
-+{
-+	__asm__ (
-+	"	sw	%2, 0xC8(%1)			\n"
-+	"	lw	%0, 0xCC(%1)			\n"
-+	: "=r" (x)
-+	: "r" (0xB2000000), "r" (x));
-+
-+	return x;
-+}
-+
-+#define __arch__swab16(x)	___adm5120__swab16(x)
-+#define __arch__swab32(x)	___adm5120__swab32(x)
-+
-+#endif /* CONFIG_ADM5120_HARDWARE_SWAB */
-+
- #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
- #  define __BYTEORDER_HAS_U64__
- #  define __SWAB_64_THRU_32__
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch
index 2b4381c..6e6d748 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/100-mtd-myloder-partition-parser.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/mtd/Kconfig
+Index: linux-2.6.22/drivers/mtd/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/Kconfig
+--- linux-2.6.22.orig/drivers/mtd/Kconfig
++++ linux-2.6.22/drivers/mtd/Kconfig
 @@ -155,6 +155,22 @@ config MTD_AFS_PARTS
  	  for your particular device. It won't happen automatically. The
  	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
@@ -25,10 +25,10 @@ Index: linux-2.6.22-rc6/drivers/mtd/Kconfig
  comment "User Modules And Translation Layers"
  
  config MTD_CHAR
-Index: linux-2.6.22-rc6/drivers/mtd/Makefile
+Index: linux-2.6.22/drivers/mtd/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/Makefile
+--- linux-2.6.22.orig/drivers/mtd/Makefile
++++ linux-2.6.22/drivers/mtd/Makefile
 @@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
  obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
  obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/101-cfi-fixup-macronix-bootloc.patch b/target/linux/adm5120-2.6/patches-2.6.22/101-cfi-fixup-macronix-bootloc.patch
index 5740d4a..b68eade 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/101-cfi-fixup-macronix-bootloc.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/101-cfi-fixup-macronix-bootloc.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
+Index: linux-2.6.22/drivers/mtd/chips/cfi_cmdset_0002.c
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.6.22.orig/drivers/mtd/chips/cfi_cmdset_0002.c
++++ linux-2.6.22/drivers/mtd/chips/cfi_cmdset_0002.c
 @@ -47,12 +47,19 @@
  #define MANUFACTURER_AMD	0x0001
  #define MANUFACTURER_ATMEL	0x001F
@@ -74,10 +74,10 @@ Index: linux-2.6.22-rc6/drivers/mtd/chips/cfi_cmdset_0002.c
  	{ 0, 0, NULL, NULL }
  };
  static struct cfi_fixup jedec_fixup_table[] = {
-Index: linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
+Index: linux-2.6.22/drivers/mtd/chips/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/chips/Kconfig
+--- linux-2.6.22.orig/drivers/mtd/chips/Kconfig
++++ linux-2.6.22/drivers/mtd/chips/Kconfig
 @@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
  	  provides support for one of those command sets, used on chips
  	  including the AMD Am29LV320.
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/102-jedec-pmc-39lvxxx-chips.patch b/target/linux/adm5120-2.6/patches-2.6.22/102-jedec-pmc-39lvxxx-chips.patch
new file mode 100644
index 0000000..fa9d35d
--- /dev/null
+++ b/target/linux/adm5120-2.6/patches-2.6.22/102-jedec-pmc-39lvxxx-chips.patch
@@ -0,0 +1,74 @@
+Index: linux-2.6.22/drivers/mtd/chips/jedec_probe.c
+===================================================================
+--- linux-2.6.22.orig/drivers/mtd/chips/jedec_probe.c
++++ linux-2.6.22/drivers/mtd/chips/jedec_probe.c
+@@ -121,6 +121,10 @@
+ #define UPD29F064115	0x221C
+ 
+ /* PMC */
++#define PM39LV512	0x001B
++#define PM39LV010	0x001C
++#define PM39LV020	0x003D
++#define PM39LV040	0x003E
+ #define PM49FL002	0x006D
+ #define PM49FL004	0x006E
+ #define PM49FL008	0x006A
+@@ -1246,6 +1250,58 @@ static const struct amd_flash_info jedec
+ 			ERASEINFO(0x02000,2),
+ 			ERASEINFO(0x04000,1),
+ 		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV512,
++		.name		= "PMC Pm39LV512",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_64KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,16),
++		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV010,
++		.name		= "PMC Pm39LV010",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_128KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,32),
++		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV020,
++		.name		= "PMC Pm39LV020",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_256KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,64),
++		}
++        }, {
++		.mfr_id		= MANUFACTURER_PMC,
++		.dev_id		= PM39LV040,
++		.name		= "PMC Pm39LV040",
++ 		.uaddr		= {
++			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
++		},
++		.DevSize	= SIZE_512KiB,
++		.CmdSet		= P_ID_AMD_STD,
++		.NumEraseRegions= 1,
++		.regions	= {
++			ERASEINFO(0x01000,128),
++		}
+ 	}, {
+ 		.mfr_id		= MANUFACTURER_PMC,
+ 		.dev_id		= PM49FL002,
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch
index 47378e5..de3ffa0 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/arch/mips/kernel/head.S
+Index: linux-2.6.22/arch/mips/kernel/head.S
 ===================================================================
---- linux-2.6.22-rc6.orig/arch/mips/kernel/head.S
-+++ linux-2.6.22-rc6/arch/mips/kernel/head.S
+--- linux-2.6.22.orig/arch/mips/kernel/head.S
++++ linux-2.6.22/arch/mips/kernel/head.S
 @@ -129,14 +129,19 @@
  #endif
  	.endm
diff --git a/target/linux/adm5120-2.6/patches-2.6.22/500-Nand.patch b/target/linux/adm5120-2.6/patches-2.6.22/500-Nand.patch
index fb503c5..de96bab 100644
--- a/target/linux/adm5120-2.6/patches-2.6.22/500-Nand.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/500-Nand.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
+Index: linux-2.6.22/drivers/mtd/nand/Kconfig
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/nand/Kconfig
-+++ linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
+--- linux-2.6.22.orig/drivers/mtd/nand/Kconfig
++++ linux-2.6.22/drivers/mtd/nand/Kconfig
 @@ -81,6 +81,12 @@ config MTD_NAND_TS7250
  	help
  	  Support for NAND flash on Technologic Systems TS-7250 platform.
@@ -15,10 +15,10 @@ Index: linux-2.6.22-rc6/drivers/mtd/nand/Kconfig
  config MTD_NAND_IDS
  	tristate
  
-Index: linux-2.6.22-rc6/drivers/mtd/nand/Makefile
+Index: linux-2.6.22/drivers/mtd/nand/Makefile
 ===================================================================
---- linux-2.6.22-rc6.orig/drivers/mtd/nand/Makefile
-+++ linux-2.6.22-rc6/drivers/mtd/nand/Makefile
+--- linux-2.6.22.orig/drivers/mtd/nand/Makefile
++++ linux-2.6.22/drivers/mtd/nand/Makefile
 @@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nan
  obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
  obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o