diff options
| author | Gabor Juhos <juhosg@openwrt.org> | 2007-12-16 19:03:40 +0000 |
|---|---|---|
| committer | Gabor Juhos <juhosg@openwrt.org> | 2007-12-16 19:03:40 +0000 |
| commit | 3befb653fa1877673fb5b84913413b9b42eb600b (patch) | |
| tree | e1f3294017cb7eb659c1d870bae614a3b20978cc /target/linux/adm5120/files/arch | |
| parent | 7e83cf568adda47d200a398594a8a603fa08792a (diff) | |
| download | mtk-20170518-3befb653fa1877673fb5b84913413b9b42eb600b.zip mtk-20170518-3befb653fa1877673fb5b84913413b9b42eb600b.tar.gz mtk-20170518-3befb653fa1877673fb5b84913413b9b42eb600b.tar.bz2 | |
add support for LEDs on the NP28G board, thanks to kenny (closes: #2825)
SVN-Revision: 9781
Diffstat (limited to 'target/linux/adm5120/files/arch')
| -rw-r--r-- | target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c | 27 |
1 files changed, 23 insertions, 4 deletions
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c index a58bec3..d1c6bc4 100644 --- a/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c +++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c @@ -102,7 +102,12 @@ static void wp54_reset(void) gpio_set_value(ADM5120_GPIO_PIN3, 0); } -static void __init np2xg_setup(void) +static void np28g_reset(void) +{ + gpio_set_value(ADM5120_GPIO_PIN4, 0); +} + +static void __init np27g_setup(void) { gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ gpio_direction_output(ADM5120_GPIO_PIN5, 0); @@ -113,6 +118,20 @@ static void __init np2xg_setup(void) /* TODO: setup mac address */ } +static void __init np28g_setup(void) +{ + gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + + gpio_request(ADM5120_GPIO_PIN4, NULL); /* for system reset */ + gpio_direction_output(ADM5120_GPIO_PIN4, 1); + + /* setup data for flash0 device */ + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + + /* TODO: setup mac address */ +} + static void __init wp54_setup(void) { gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ @@ -121,7 +140,6 @@ static void __init wp54_setup(void) gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */ gpio_direction_output(ADM5120_GPIO_PIN3, 1); - /* setup data for flash0 device */ adm5120_flash0_data.switch_bank = switch_bank_gpio5; @@ -147,15 +165,16 @@ static void __init wp54_wrt_setup(void) /*--------------------------------------------------------------------------*/ ADM5120_BOARD_START(NP27G, "Compex NetPassage 27G") - .board_setup = np2xg_setup, + .board_setup = np27g_setup, .eth_num_ports = 5, .eth_vlans = np27g_vlans, .num_devices = ARRAY_SIZE(np2xg_devices), .devices = np2xg_devices, + /* TODO: add PCI IRQ map */ ADM5120_BOARD_END ADM5120_BOARD_START(NP28G, "Compex NetPassage 28G") - .board_setup = np2xg_setup, + .board_setup = np28g_setup, .eth_num_ports = 4, .eth_vlans = np28g_vlans, .num_devices = ARRAY_SIZE(np2xg_devices), |