change switch register access macros

SVN-Revision: 9962

9 files changed, 46 insertions, 46 deletions

diff --git a/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c b/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c
index 0abb961..3e51106 100644
--- a/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c
+++ b/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c
@@ -52,21 +52,21 @@ void adm5120_ndelay(u32 ns)
 {
 	u32	t;
 
-	SW_WRITE_REG(TIMER, TIMER_PERIOD_DEFAULT);
-	SW_WRITE_REG(TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
+	SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
+	SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
 
 	t = (ns+640) / 640;
 	t &= TIMER_PERIOD_MASK;
-	SW_WRITE_REG(TIMER, t | TIMER_TE);
+	SW_WRITE_REG(SWITCH_REG_TIMER, t | TIMER_TE);
 
 	/* wait until the timer expires */
 	do {
-		t = SW_READ_REG(TIMER_INT);
+		t = SW_READ_REG(SWITCH_REG_TIMER_INT);
 	} while ((t & TIMER_INT_TOS) == 0);
 
 	/* leave the timer disabled */
-	SW_WRITE_REG(TIMER, TIMER_PERIOD_DEFAULT);
-	SW_WRITE_REG(TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
+	SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
+	SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
 }
 
 void __init adm5120_soc_init(void)
@@ -74,7 +74,7 @@ void __init adm5120_soc_init(void)
 	u32 code;
 	u32 clks;
 
-	code = SW_READ_REG(CODE);
+	code = SW_READ_REG(SWITCH_REG_CODE);
 
 	adm5120_product_code = CODE_GET_PC(code);
 	adm5120_revision = CODE_GET_REV(code);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/gpio.c b/target/linux/adm5120/files/arch/mips/adm5120/gpio.c
index 01d5a87..a7ae549 100644
--- a/target/linux/adm5120/files/arch/mips/adm5120/gpio.c
+++ b/target/linux/adm5120/files/arch/mips/adm5120/gpio.c
@@ -343,7 +343,7 @@ EXPORT_SYMBOL(adm5120_irq_to_gpio);
 void __init adm5120_gpio_csx0_enable(void)
 {
 	gpio_conf2 |= GPIO_CONF2_CSX0;
-	SW_WRITE_REG(GPIO_CONF2, gpio_conf2);
+	SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
 
 	adm5120_gpio_map[ADM5120_GPIO_PIN1].flags &= ~GPIO_FLAG_VALID;
 	adm5120_gpio_map[ADM5120_GPIO_PIN2].irq = ADM5120_IRQ_GPIO2;
@@ -352,7 +352,7 @@ void __init adm5120_gpio_csx0_enable(void)
 void __init adm5120_gpio_csx1_enable(void)
 {
 	gpio_conf2 |= GPIO_CONF2_CSX1;
-	SW_WRITE_REG(GPIO_CONF2, gpio_conf2);
+	SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
 
 	adm5120_gpio_map[ADM5120_GPIO_PIN3].flags &= ~GPIO_FLAG_VALID;
 	if (adm5120_package_bga())
@@ -362,7 +362,7 @@ void __init adm5120_gpio_csx1_enable(void)
 void __init adm5120_gpio_ew_enable(void)
 {
 	gpio_conf2 |= GPIO_CONF2_EW;
-	SW_WRITE_REG(GPIO_CONF2, gpio_conf2);
+	SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
 
 	adm5120_gpio_map[ADM5120_GPIO_PIN0].flags &= ~GPIO_FLAG_VALID;
 }
@@ -372,7 +372,7 @@ void __init adm5120_gpio_init(void)
 	int i;
 
 	gpio_conf2 = 0;
-	SW_WRITE_REG(GPIO_CONF2, gpio_conf2);
+	SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
 
 	for (i = 0; i < ADM5120_GPIO_COUNT; i++)
 		adm5120_gpio_map[i].flags = GPIO_FLAG_VALID;
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/memory.c b/target/linux/adm5120/files/arch/mips/adm5120/memory.c
index 79e9cb4..1803f2b 100644
--- a/target/linux/adm5120/files/arch/mips/adm5120/memory.c
+++ b/target/linux/adm5120/files/arch/mips/adm5120/memory.c
@@ -82,7 +82,7 @@ static void __init adm5120_detect_memsize(void)
 	u32	size, maxsize;
 	u8	*p;
 
-	memctrl = SW_READ_REG(MEMCTRL);
+	memctrl = SW_READ_REG(SWITCH_REG_MEMCTRL);
 	switch (memctrl & MEMCTRL_SDRS_MASK) {
 	case MEMCTRL_SDRS_4M:
 		maxsize = 4 << 20;
@@ -148,7 +148,7 @@ static void __init adm5120_detect_memsize(void)
 			memctrl |= MEMCTRL_SDRS_64M;
 			break;
 		}
-		SW_WRITE_REG(MEMCTRL, memctrl);
+		SW_WRITE_REG(SWITCH_REG_MEMCTRL, memctrl);
 	}
 
 out:
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/reset.c b/target/linux/adm5120/files/arch/mips/adm5120/reset.c
index aa278fd..bcdce5a 100644
--- a/target/linux/adm5120/files/arch/mips/adm5120/reset.c
+++ b/target/linux/adm5120/files/arch/mips/adm5120/reset.c
@@ -48,7 +48,7 @@ void adm5120_restart(char *command)
 	if (adm5120_board_reset)
 		adm5120_board_reset();
 
-	SW_WRITE_REG(SOFT_RESET, 1);
+	SW_WRITE_REG(SWITCH_REG_SOFT_RESET, 1);
 }
 
 void adm5120_halt(void)
diff --git a/target/linux/adm5120/files/drivers/char/watchdog/adm5120_wdt.c b/target/linux/adm5120/files/drivers/char/watchdog/adm5120_wdt.c
index 982fe39..2439fbc 100644
--- a/target/linux/adm5120/files/drivers/char/watchdog/adm5120_wdt.c
+++ b/target/linux/adm5120/files/drivers/char/watchdog/adm5120_wdt.c
@@ -1,5 +1,5 @@
 /*
- *	ADM5120_WDT 0.01: Infineon ADM5120 SoC watchdog driver 
+ *	ADM5120_WDT 0.01: Infineon ADM5120 SoC watchdog driver
  *	Copyright (c) Ondrej Zajicek <santiago@crfreenet.org>, 2007
  *
  *	based on
@@ -47,26 +47,26 @@ MODULE_LICENSE("GPL");
 static inline void wdt_set_timeout(void)
 {
 	u32 val = (1 << 31) | (((timeout * 100) & 0x7FFF) << 16);
-	SW_WRITE_REG(WDOG0, val);
+	SW_WRITE_REG(SWITCH_REG_WDOG0, val);
 }
 
-/* 
+/*
    It looks like WDOG0-register-write don't modify counter,
    but WDOG0-register-read resets counter.
 */
 
 static inline void wdt_reset_counter(void)
 {
-	SW_READ_REG(WDOG0);
+	SW_READ_REG(SWITCH_REG_WDOG0);
 }
 
 static inline void wdt_disable(void)
 {
-	SW_WRITE_REG(WDOG0, 0x7FFF0000);
+	SW_WRITE_REG(SWITCH_REG_WDOG0, 0x7FFF0000);
 }
 
 
- 
+
 static int wdt_open(struct inode *inode, struct file *file)
 {
 	/* Allow only one person to hold it open */
diff --git a/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c b/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c
index 824d2f5..b84492f 100644
--- a/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c
+++ b/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c
@@ -261,7 +261,7 @@ static int adm5120_flash_initinfo(struct adm5120_flash_info *info,
 
 	if (info->amap.window_size == 0) {
 		/* get memory window size */
-		t = SW_READ_REG(MEMCTRL) >> fdesc->srs_shift;
+		t = SW_READ_REG(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift;
 		t &= MEMCTRL_SRS_MASK;
 		info->amap.window_size = flash_sizes[t];
 	}
diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.c b/target/linux/adm5120/files/drivers/net/adm5120sw.c
index f876844..c8c3f1d 100644
--- a/target/linux/adm5120/files/drivers/net/adm5120sw.c
+++ b/target/linux/adm5120/files/drivers/net/adm5120sw.c
@@ -280,56 +280,56 @@ static void sw_dump_regs(void)
 {
 	u32 t;
 
-	t = SW_READ_REG(PHY_STATUS);
+	t = sw_read_reg(SWITCH_REG_PHY_STATUS);
 	SW_DBG("phy_status: %08X\n", t);
 
-	t = SW_READ_REG(CPUP_CONF);
+	t = sw_read_reg(SWITCH_REG_CPUP_CONF);
 	SW_DBG("cpup_conf: %08X%s%s%s\n", t,
 		(t & CPUP_CONF_DCPUP) ? " DCPUP" : "",
 		(t & CPUP_CONF_CRCP) ? " CRCP" : "",
 		(t & CPUP_CONF_BTM) ? " BTM" : "");
 
-	t = SW_READ_REG(PORT_CONF0);
+	t = sw_read_reg(SWITCH_REG_PORT_CONF0);
 	SW_DBG("port_conf0: %08X\n", t);
-	t = SW_READ_REG(PORT_CONF1);
+	t = sw_read_reg(SWITCH_REG_PORT_CONF1);
 	SW_DBG("port_conf1: %08X\n", t);
-	t = SW_READ_REG(PORT_CONF2);
+	t = sw_read_reg(SWITCH_REG_PORT_CONF2);
 	SW_DBG("port_conf2: %08X\n", t);
 
-	t = SW_READ_REG(VLAN_G1);
+	t = sw_read_reg(SWITCH_REG_VLAN_G1);
 	SW_DBG("vlan g1: %08X\n", t);
-	t = SW_READ_REG(VLAN_G2);
+	t = sw_read_reg(SWITCH_REG_VLAN_G2);
 	SW_DBG("vlan g2: %08X\n", t);
 
-	t = SW_READ_REG(BW_CNTL0);
+	t = sw_read_reg(SWITCH_REG_BW_CNTL0);
 	SW_DBG("bw_cntl0: %08X\n", t);
-	t = SW_READ_REG(BW_CNTL1);
+	t = sw_read_reg(SWITCH_REG_BW_CNTL1);
 	SW_DBG("bw_cntl1: %08X\n", t);
 
-	t = SW_READ_REG(PHY_CNTL0);
+	t = sw_read_reg(SWITCH_REG_PHY_CNTL0);
 	SW_DBG("phy_cntl0: %08X\n", t);
-	t = SW_READ_REG(PHY_CNTL1);
+	t = sw_read_reg(SWITCH_REG_PHY_CNTL1);
 	SW_DBG("phy_cntl1: %08X\n", t);
-	t = SW_READ_REG(PHY_CNTL2);
+	t = sw_read_reg(SWITCH_REG_PHY_CNTL2);
 	SW_DBG("phy_cntl2: %08X\n", t);
-	t = SW_READ_REG(PHY_CNTL3);
+	t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
 	SW_DBG("phy_cntl3: %08X\n", t);
-	t = SW_READ_REG(PHY_CNTL4);
+	t = sw_read_reg(SWITCH_REG_PHY_CNTL4);
 	SW_DBG("phy_cntl4: %08X\n", t);
 
-	t = SW_READ_REG(INT_STATUS);
+	t = sw_read_reg(SWITCH_REG_INT_STATUS);
 	sw_dump_intr_mask("int_status: ", t);
 
-	t = SW_READ_REG(INT_MASK);
+	t = sw_read_reg(SWITCH_REG_INT_MASK);
 	sw_dump_intr_mask("int_mask: ", t);
 
-	t = SW_READ_REG(SHDA);
+	t = sw_read_reg(SWITCH_REG_SHDA);
 	SW_DBG("shda: %08X\n", t);
-	t = SW_READ_REG(SLDA);
+	t = sw_read_reg(SWITCH_REG_SLDA);
 	SW_DBG("slda: %08X\n", t);
-	t = SW_READ_REG(RHDA);
+	t = sw_read_reg(SWITCH_REG_RHDA);
 	SW_DBG("rhda: %08X\n", t);
-	t = SW_READ_REG(RLDA);
+	t = sw_read_reg(SWITCH_REG_RLDA);
 	SW_DBG("rlda: %08X\n", t);
 }
 
@@ -1061,7 +1061,7 @@ static int __init adm5120_switch_probe(struct platform_device *pdev)
 		(SWITCH_PORTS_PHY << PHY_CNTL2_PHYR_SHIFT) |
 		(SWITCH_PORTS_PHY << PHY_CNTL2_AMDIX_SHIFT) |
 		PHY_CNTL2_RMAE;
-	SW_WRITE_REG(PHY_CNTL2, t);
+	sw_write_reg(SWITCH_REG_PHY_CNTL2, t);
 
 	t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
 	t |= PHY_CNTL3_RNT;
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h
index 8d86fc6..a321db5 100644
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h
@@ -65,8 +65,8 @@
 
 static inline void adm5120_nand_enable(void)
 {
-	SW_WRITE_REG(BW_CNTL1, BW_CNTL1_NAND_ENABLE);
-	SW_WRITE_REG(BOOT_DONE, 1);
+	SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE);
+	SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1);
 }
 
 static inline void adm5120_nand_set_wpn(unsigned int set)
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
index f96c7d5..9ed5233 100644
--- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
@@ -32,9 +32,9 @@
 #define BITMASK(len)	((1 << (len))-1)
 
 #define SW_READ_REG(r)		__raw_readl( \
-	(void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + SWITCH_REG_ ## r)
+	(void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
 #define SW_WRITE_REG(r, v)	__raw_writel((v), \
-	(void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + SWITCH_REG_ ## r)
+	(void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
 
 /* Switch register offsets */
 #define SWITCH_REG_CODE		0x0000