refresh kernel patches

SVN-Revision: 11193

22 files changed, 120 insertions, 120 deletions

diff --git a/target/linux/adm5120/patches-2.6.25/001-adm5120.patch b/target/linux/adm5120/patches-2.6.25/001-adm5120.patch
index 5fe25a5..8818fd8 100644
--- a/target/linux/adm5120/patches-2.6.25/001-adm5120.patch
+++ b/target/linux/adm5120/patches-2.6.25/001-adm5120.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/arch/mips/Kconfig
+Index: linux-2.6.25.4/arch/mips/Kconfig
 ===================================================================
---- linux-2.6.25.orig/arch/mips/Kconfig
-+++ linux-2.6.25/arch/mips/Kconfig
+--- linux-2.6.25.4.orig/arch/mips/Kconfig
++++ linux-2.6.25.4/arch/mips/Kconfig
 @@ -18,6 +18,20 @@ choice
  	prompt "System type"
  	default SGI_IP22
@@ -31,10 +31,10 @@ Index: linux-2.6.25/arch/mips/Kconfig
  source "arch/mips/au1000/Kconfig"
  source "arch/mips/basler/excite/Kconfig"
  source "arch/mips/jazz/Kconfig"
-Index: linux-2.6.25/arch/mips/Makefile
+Index: linux-2.6.25.4/arch/mips/Makefile
 ===================================================================
---- linux-2.6.25.orig/arch/mips/Makefile
-+++ linux-2.6.25/arch/mips/Makefile
+--- linux-2.6.25.4.orig/arch/mips/Makefile
++++ linux-2.6.25.4/arch/mips/Makefile
 @@ -174,6 +174,16 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -Iinclude/
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
@@ -52,10 +52,10 @@ Index: linux-2.6.25/arch/mips/Makefile
  # Common Alchemy Au1x00 stuff
  #
  core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
-Index: linux-2.6.25/include/asm-mips/bootinfo.h
+Index: linux-2.6.25.4/include/asm-mips/bootinfo.h
 ===================================================================
---- linux-2.6.25.orig/include/asm-mips/bootinfo.h
-+++ linux-2.6.25/include/asm-mips/bootinfo.h
+--- linux-2.6.25.4.orig/include/asm-mips/bootinfo.h
++++ linux-2.6.25.4/include/asm-mips/bootinfo.h
 @@ -94,6 +94,58 @@
  #define MACH_MSP7120_FPGA       5	/* PMC-Sierra MSP7120 Emulation */
  #define MACH_MSP_OTHER        255	/* PMC-Sierra unknown board type */
diff --git a/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch
index f23ebaa..dfe8eb7 100644
--- a/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch
+++ b/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/mtd/maps/Kconfig
+Index: linux-2.6.25.4/drivers/mtd/maps/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/mtd/maps/Kconfig
-+++ linux-2.6.25/drivers/mtd/maps/Kconfig
+--- linux-2.6.25.4.orig/drivers/mtd/maps/Kconfig
++++ linux-2.6.25.4/drivers/mtd/maps/Kconfig
 @@ -590,5 +590,9 @@ config MTD_PLATRAM
  
  	  This selection automatically selects the map_ram driver.
@@ -12,10 +12,10 @@ Index: linux-2.6.25/drivers/mtd/maps/Kconfig
 +
  endmenu
  
-Index: linux-2.6.25/drivers/mtd/maps/Makefile
+Index: linux-2.6.25.4/drivers/mtd/maps/Makefile
 ===================================================================
---- linux-2.6.25.orig/drivers/mtd/maps/Makefile
-+++ linux-2.6.25/drivers/mtd/maps/Makefile
+--- linux-2.6.25.4.orig/drivers/mtd/maps/Makefile
++++ linux-2.6.25.4/drivers/mtd/maps/Makefile
 @@ -44,6 +44,7 @@ obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.
  obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
  obj-$(CONFIG_MTD_PCI)		+= pci.o
diff --git a/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch
index 69a0182..36579c5 100644
--- a/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch
+++ b/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/net/Kconfig
+Index: linux-2.6.25.4/drivers/net/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/net/Kconfig
-+++ linux-2.6.25/drivers/net/Kconfig
+--- linux-2.6.25.4.orig/drivers/net/Kconfig
++++ linux-2.6.25.4/drivers/net/Kconfig
 @@ -606,6 +606,10 @@ config MIPS_AU1X00_ENET
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
@@ -13,10 +13,10 @@ Index: linux-2.6.25/drivers/net/Kconfig
  config SGI_IOC3_ETH
  	bool "SGI IOC3 Ethernet"
  	depends on PCI && SGI_IP27
-Index: linux-2.6.25/drivers/net/Makefile
+Index: linux-2.6.25.4/drivers/net/Makefile
 ===================================================================
---- linux-2.6.25.orig/drivers/net/Makefile
-+++ linux-2.6.25/drivers/net/Makefile
+--- linux-2.6.25.4.orig/drivers/net/Makefile
++++ linux-2.6.25.4/drivers/net/Makefile
 @@ -187,6 +187,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
diff --git a/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch
index 5775578..262ab77 100644
--- a/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch
+++ b/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/usb/host/Kconfig
+Index: linux-2.6.25.4/drivers/usb/host/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.25/drivers/usb/host/Kconfig
+--- linux-2.6.25.4.orig/drivers/usb/host/Kconfig
++++ linux-2.6.25.4/drivers/usb/host/Kconfig
 @@ -260,3 +260,6 @@ config USB_R8A66597_HCD
  	  To compile this driver as a module, choose M here: the
  	  module will be called r8a66597-hcd.
@@ -9,10 +9,10 @@ Index: linux-2.6.25/drivers/usb/host/Kconfig
 +config USB_ADM5120_HCD
 +	tristate "ADM5120 HCD support (EXPERIMENTAL)"
 +	depends on USB && MIPS_ADM5120 && EXPERIMENTAL
-Index: linux-2.6.25/drivers/usb/host/Makefile
+Index: linux-2.6.25.4/drivers/usb/host/Makefile
 ===================================================================
---- linux-2.6.25.orig/drivers/usb/host/Makefile
-+++ linux-2.6.25/drivers/usb/host/Makefile
+--- linux-2.6.25.4.orig/drivers/usb/host/Makefile
++++ linux-2.6.25.4/drivers/usb/host/Makefile
 @@ -8,6 +8,7 @@ endif
  
  obj-$(CONFIG_PCI)		+= pci-quirks.o
@@ -21,10 +21,10 @@ Index: linux-2.6.25/drivers/usb/host/Makefile
  obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
  obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
  obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
-Index: linux-2.6.25/drivers/usb/Makefile
+Index: linux-2.6.25.4/drivers/usb/Makefile
 ===================================================================
---- linux-2.6.25.orig/drivers/usb/Makefile
-+++ linux-2.6.25/drivers/usb/Makefile
+--- linux-2.6.25.4.orig/drivers/usb/Makefile
++++ linux-2.6.25.4/drivers/usb/Makefile
 @@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
  obj-$(CONFIG_USB_SL811_HCD)	+= host/
  obj-$(CONFIG_USB_U132_HCD)	+= host/
diff --git a/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch b/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch
index 474e7ca..8d3789e 100644
--- a/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch
+++ b/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/leds/Kconfig
+Index: linux-2.6.25.4/drivers/leds/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/leds/Kconfig
-+++ linux-2.6.25/drivers/leds/Kconfig
+--- linux-2.6.25.4.orig/drivers/leds/Kconfig
++++ linux-2.6.25.4/drivers/leds/Kconfig
 @@ -25,6 +25,21 @@ config LEDS_ATMEL_PWM
  	  This option enables support for LEDs driven using outputs
  	  of the dedicated PWM controller found on newer Atmel SOCs.
@@ -24,10 +24,10 @@ Index: linux-2.6.25/drivers/leds/Kconfig
  config LEDS_CORGI
  	tristate "LED Support for the Sharp SL-C7x0 series"
  	depends on LEDS_CLASS && PXA_SHARP_C7xx
-Index: linux-2.6.25/drivers/leds/Makefile
+Index: linux-2.6.25.4/drivers/leds/Makefile
 ===================================================================
---- linux-2.6.25.orig/drivers/leds/Makefile
-+++ linux-2.6.25/drivers/leds/Makefile
+--- linux-2.6.25.4.orig/drivers/leds/Makefile
++++ linux-2.6.25.4/drivers/leds/Makefile
 @@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
  obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
  
diff --git a/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch
index 2da99ba..d113fd3 100644
--- a/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch
+++ b/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch
@@ -1,16 +1,16 @@
-Index: linux-2.6.25/arch/mips/pci/Makefile
+Index: linux-2.6.25.4/arch/mips/pci/Makefile
 ===================================================================
---- linux-2.6.25.orig/arch/mips/pci/Makefile
-+++ linux-2.6.25/arch/mips/pci/Makefile
+--- linux-2.6.25.4.orig/arch/mips/pci/Makefile
++++ linux-2.6.25.4/arch/mips/pci/Makefile
 @@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-
  obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
  obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
  obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 +obj-$(CONFIG_PCI_ADM5120)	+= pci-adm5120.o
-Index: linux-2.6.25/include/linux/pci_ids.h
+Index: linux-2.6.25.4/include/linux/pci_ids.h
 ===================================================================
---- linux-2.6.25.orig/include/linux/pci_ids.h
-+++ linux-2.6.25/include/linux/pci_ids.h
+--- linux-2.6.25.4.orig/include/linux/pci_ids.h
++++ linux-2.6.25.4/include/linux/pci_ids.h
 @@ -1704,6 +1704,9 @@
  #define PCI_VENDOR_ID_ESDGMBH		0x12fe
  #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
diff --git a/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch
index 015f894..15f9582 100644
--- a/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/leds/Kconfig
+Index: linux-2.6.25.4/drivers/leds/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/leds/Kconfig
-+++ linux-2.6.25/drivers/leds/Kconfig
+--- linux-2.6.25.4.orig/drivers/leds/Kconfig
++++ linux-2.6.25.4/drivers/leds/Kconfig
 @@ -213,4 +213,12 @@ config LEDS_TRIGGER_DEFAULT_ON
  	  This allows LEDs to be initialised in the ON state.
  	  If unsure, say Y.
@@ -15,10 +15,10 @@ Index: linux-2.6.25/drivers/leds/Kconfig
 +	  If unsure, say N.
 +
  endif # NEW_LEDS
-Index: linux-2.6.25/drivers/leds/Makefile
+Index: linux-2.6.25.4/drivers/leds/Makefile
 ===================================================================
---- linux-2.6.25.orig/drivers/leds/Makefile
-+++ linux-2.6.25/drivers/leds/Makefile
+--- linux-2.6.25.4.orig/drivers/leds/Makefile
++++ linux-2.6.25.4/drivers/leds/Makefile
 @@ -30,3 +30,4 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= l
  obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
diff --git a/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch
index 7239d23..5b5d38b 100644
--- a/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch
+++ b/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/mtd/Kconfig
+Index: linux-2.6.25.4/drivers/mtd/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/mtd/Kconfig
-+++ linux-2.6.25/drivers/mtd/Kconfig
+--- linux-2.6.25.4.orig/drivers/mtd/Kconfig
++++ linux-2.6.25.4/drivers/mtd/Kconfig
 @@ -168,6 +168,22 @@ config MTD_OF_PARTS
  	  the partition map from the children of the flash node,
  	  as described in Documentation/powerpc/booting-without-of.txt.
@@ -25,10 +25,10 @@ Index: linux-2.6.25/drivers/mtd/Kconfig
  comment "User Modules And Translation Layers"
  
  config MTD_CHAR
-Index: linux-2.6.25/drivers/mtd/Makefile
+Index: linux-2.6.25.4/drivers/mtd/Makefile
 ===================================================================
---- linux-2.6.25.orig/drivers/mtd/Makefile
-+++ linux-2.6.25/drivers/mtd/Makefile
+--- linux-2.6.25.4.orig/drivers/mtd/Makefile
++++ linux-2.6.25.4/drivers/mtd/Makefile
 @@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
  obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
  obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
diff --git a/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch
index a1dce25..e1f0f6e 100644
--- a/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch
+++ b/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/mtd/chips/cfi_cmdset_0002.c
+Index: linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c
 ===================================================================
---- linux-2.6.25.orig/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ linux-2.6.25/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.6.25.4.orig/drivers/mtd/chips/cfi_cmdset_0002.c
++++ linux-2.6.25.4/drivers/mtd/chips/cfi_cmdset_0002.c
 @@ -47,12 +47,19 @@
  #define MANUFACTURER_AMD	0x0001
  #define MANUFACTURER_ATMEL	0x001F
@@ -74,10 +74,10 @@ Index: linux-2.6.25/drivers/mtd/chips/cfi_cmdset_0002.c
  	{ 0, 0, NULL, NULL }
  };
  
-Index: linux-2.6.25/drivers/mtd/chips/Kconfig
+Index: linux-2.6.25.4/drivers/mtd/chips/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/mtd/chips/Kconfig
-+++ linux-2.6.25/drivers/mtd/chips/Kconfig
+--- linux-2.6.25.4.orig/drivers/mtd/chips/Kconfig
++++ linux-2.6.25.4/drivers/mtd/chips/Kconfig
 @@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
  	  provides support for one of those command sets, used on chips
  	  including the AMD Am29LV320.
diff --git a/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch
index a8720f3..d3bd11e 100644
--- a/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch
+++ b/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25.1/drivers/mtd/chips/jedec_probe.c
+Index: linux-2.6.25.4/drivers/mtd/chips/jedec_probe.c
 ===================================================================
---- linux-2.6.25.1.orig/drivers/mtd/chips/jedec_probe.c
-+++ linux-2.6.25.1/drivers/mtd/chips/jedec_probe.c
+--- linux-2.6.25.4.orig/drivers/mtd/chips/jedec_probe.c
++++ linux-2.6.25.4/drivers/mtd/chips/jedec_probe.c
 @@ -121,6 +121,10 @@
  #define UPD29F064115	0x221C
  
diff --git a/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch
index c40bfad..110286e 100644
--- a/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch
+++ b/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/mtd/Kconfig
+Index: linux-2.6.25.4/drivers/mtd/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/mtd/Kconfig
-+++ linux-2.6.25/drivers/mtd/Kconfig
+--- linux-2.6.25.4.orig/drivers/mtd/Kconfig
++++ linux-2.6.25.4/drivers/mtd/Kconfig
 @@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT
  	depends on MTD_PARTITIONS
  	default y
@@ -14,10 +14,10 @@ Index: linux-2.6.25/drivers/mtd/Kconfig
  config MTD_REDBOOT_PARTS
  	tristate "RedBoot partition table parsing"
  	depends on MTD_PARTITIONS
-Index: linux-2.6.25/drivers/mtd/Makefile
+Index: linux-2.6.25.4/drivers/mtd/Makefile
 ===================================================================
---- linux-2.6.25.orig/drivers/mtd/Makefile
-+++ linux-2.6.25/drivers/mtd/Makefile
+--- linux-2.6.25.4.orig/drivers/mtd/Makefile
++++ linux-2.6.25.4/drivers/mtd/Makefile
 @@ -8,6 +8,7 @@ mtd-y				:= mtdcore.o mtdsuper.o
  mtd-$(CONFIG_MTD_PARTITIONS)	+= mtdpart.o
  
diff --git a/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch
index 13052be..c9a00d8 100644
--- a/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch
+++ b/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/ata/Makefile
+Index: linux-2.6.25.4/drivers/ata/Makefile
 ===================================================================
---- linux-2.6.25.orig/drivers/ata/Makefile
-+++ linux-2.6.25/drivers/ata/Makefile
+--- linux-2.6.25.4.orig/drivers/ata/Makefile
++++ linux-2.6.25.4/drivers/ata/Makefile
 @@ -71,6 +71,7 @@ obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
  obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
  obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
@@ -10,10 +10,10 @@ Index: linux-2.6.25/drivers/ata/Makefile
  # Should be last but two libata driver
  obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
  # Should be last but one libata driver
-Index: linux-2.6.25/drivers/ata/Kconfig
+Index: linux-2.6.25.4/drivers/ata/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/ata/Kconfig
-+++ linux-2.6.25/drivers/ata/Kconfig
+--- linux-2.6.25.4.orig/drivers/ata/Kconfig
++++ linux-2.6.25.4/drivers/ata/Kconfig
 @@ -679,4 +679,13 @@ config PATA_BF54X
  
  	  If unsure, say N.
diff --git a/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch b/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch
index ab0d99b..e3ff7f0 100644
--- a/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch
+++ b/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/arch/mips/kernel/head.S
+Index: linux-2.6.25.4/arch/mips/kernel/head.S
 ===================================================================
---- linux-2.6.25.orig/arch/mips/kernel/head.S
-+++ linux-2.6.25/arch/mips/kernel/head.S
+--- linux-2.6.25.4.orig/arch/mips/kernel/head.S
++++ linux-2.6.25.4/arch/mips/kernel/head.S
 @@ -126,7 +126,12 @@
  	/*
  	 * Reserved space for exception handlers.
diff --git a/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch
index 534d043..92b92d1 100644
--- a/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch
+++ b/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/serial/amba-pl010.c
+Index: linux-2.6.25.4/drivers/serial/amba-pl010.c
 ===================================================================
---- linux-2.6.25.orig/drivers/serial/amba-pl010.c
-+++ linux-2.6.25/drivers/serial/amba-pl010.c
+--- linux-2.6.25.4.orig/drivers/serial/amba-pl010.c
++++ linux-2.6.25.4/drivers/serial/amba-pl010.c
 @@ -52,11 +52,10 @@
  
  #include <asm/io.h>
@@ -264,10 +264,10 @@ Index: linux-2.6.25/drivers/serial/amba-pl010.c
  	.cons			= AMBA_CONSOLE,
  };
  
-Index: linux-2.6.25/drivers/serial/Kconfig
+Index: linux-2.6.25.4/drivers/serial/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/serial/Kconfig
-+++ linux-2.6.25/drivers/serial/Kconfig
+--- linux-2.6.25.4.orig/drivers/serial/Kconfig
++++ linux-2.6.25.4/drivers/serial/Kconfig
 @@ -287,10 +287,25 @@ config SERIAL_AMBA_PL010
  	help
  	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
diff --git a/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch
index 8a48215..b0881fb 100644
--- a/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch
+++ b/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/amba/bus.c
+Index: linux-2.6.25.4/drivers/amba/bus.c
 ===================================================================
---- linux-2.6.25.orig/drivers/amba/bus.c
-+++ linux-2.6.25/drivers/amba/bus.c
+--- linux-2.6.25.4.orig/drivers/amba/bus.c
++++ linux-2.6.25.4/drivers/amba/bus.c
 @@ -17,6 +17,10 @@
  #include <asm/io.h>
  #include <asm/sizes.h>
diff --git a/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch
index 7a8753f..59db560 100644
--- a/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch
+++ b/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/pci/Kconfig
+Index: linux-2.6.25.4/drivers/pci/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/pci/Kconfig
-+++ linux-2.6.25/drivers/pci/Kconfig
+--- linux-2.6.25.4.orig/drivers/pci/Kconfig
++++ linux-2.6.25.4/drivers/pci/Kconfig
 @@ -42,6 +42,12 @@ config PCI_DEBUG
  
  	  When in doubt, say N.
@@ -15,10 +15,10 @@ Index: linux-2.6.25/drivers/pci/Kconfig
  config HT_IRQ
  	bool "Interrupts on hypertransport devices"
  	default y
-Index: linux-2.6.25/drivers/pci/quirks.c
+Index: linux-2.6.25.4/drivers/pci/quirks.c
 ===================================================================
---- linux-2.6.25.orig/drivers/pci/quirks.c
-+++ linux-2.6.25/drivers/pci/quirks.c
+--- linux-2.6.25.4.orig/drivers/pci/quirks.c
++++ linux-2.6.25.4/drivers/pci/quirks.c
 @@ -24,6 +24,7 @@
  #include <linux/kallsyms.h>
  #include "pci.h"
diff --git a/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch
index d007946..b5e45c8 100644
--- a/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch
+++ b/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/leds/leds-gpio.c
+Index: linux-2.6.25.4/drivers/leds/leds-gpio.c
 ===================================================================
---- linux-2.6.25.orig/drivers/leds/leds-gpio.c
-+++ linux-2.6.25/drivers/leds/leds-gpio.c
+--- linux-2.6.25.4.orig/drivers/leds/leds-gpio.c
++++ linux-2.6.25.4/drivers/leds/leds-gpio.c
 @@ -41,13 +41,17 @@ static void gpio_led_set(struct led_clas
  		container_of(led_cdev, struct gpio_led_data, cdev);
  	int level;
diff --git a/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch
index 695a455..4b4c54a 100644
--- a/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch
+++ b/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/watchdog/Kconfig
+Index: linux-2.6.25.4/drivers/watchdog/Kconfig
 ===================================================================
---- linux-2.6.25.orig/drivers/watchdog/Kconfig
-+++ linux-2.6.25/drivers/watchdog/Kconfig
+--- linux-2.6.25.4.orig/drivers/watchdog/Kconfig
++++ linux-2.6.25.4/drivers/watchdog/Kconfig
 @@ -619,6 +619,18 @@ config SBC_EPX_C3_WATCHDOG
  
  # MIPS Architecture
@@ -21,10 +21,10 @@ Index: linux-2.6.25/drivers/watchdog/Kconfig
  config INDYDOG
  	tristate "Indy/I2 Hardware Watchdog"
  	depends on SGI_HAS_INDYDOG
-Index: linux-2.6.25/drivers/watchdog/Makefile
+Index: linux-2.6.25.4/drivers/watchdog/Makefile
 ===================================================================
---- linux-2.6.25.orig/drivers/watchdog/Makefile
-+++ linux-2.6.25/drivers/watchdog/Makefile
+--- linux-2.6.25.4.orig/drivers/watchdog/Makefile
++++ linux-2.6.25.4/drivers/watchdog/Makefile
 @@ -90,6 +90,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
  # M68KNOMMU Architecture
  
diff --git a/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch b/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch
index 6d7fa6b..c9a59be 100644
--- a/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch
+++ b/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/usb/host/adm5120-hcd.c
+Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
 ===================================================================
---- linux-2.6.25.orig/drivers/usb/host/adm5120-hcd.c
-+++ linux-2.6.25/drivers/usb/host/adm5120-hcd.c
+--- linux-2.6.25.4.orig/drivers/usb/host/adm5120-hcd.c
++++ linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
 @@ -45,7 +45,7 @@
  #include "../core/hcd.h"
  #include "../core/hub.h"
diff --git a/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch b/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch
index 62953b4..5f4d087 100644
--- a/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch
+++ b/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/usb/host/adm5120-dbg.c
+Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
 ===================================================================
---- linux-2.6.25.orig/drivers/usb/host/adm5120-dbg.c
-+++ linux-2.6.25/drivers/usb/host/adm5120-dbg.c
+--- linux-2.6.25.4.orig/drivers/usb/host/adm5120-dbg.c
++++ linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
 @@ -456,7 +456,7 @@ show_list(struct admhcd *ahcd, char *buf
  }
  
diff --git a/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch b/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch
index ee14a24..88688ea 100644
--- a/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch
+++ b/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25/drivers/usb/host/adm5120.h
+Index: linux-2.6.25.4/drivers/usb/host/adm5120.h
 ===================================================================
---- linux-2.6.25.orig/drivers/usb/host/adm5120.h
-+++ linux-2.6.25/drivers/usb/host/adm5120.h
+--- linux-2.6.25.4.orig/drivers/usb/host/adm5120.h
++++ linux-2.6.25.4/drivers/usb/host/adm5120.h
 @@ -431,6 +431,13 @@ struct admhcd {
  #define	OHCI_QUIRK_BE_MMIO	0x10			/* BE registers */
  #define	OHCI_QUIRK_ZFMICRO	0x20			/* Compaq ZFMicro chipset*/
@@ -16,10 +16,10 @@ Index: linux-2.6.25/drivers/usb/host/adm5120.h
  };
  
  /* convert between an hcd pointer and the corresponding ahcd_hcd */
-Index: linux-2.6.25/drivers/usb/host/adm5120-hcd.c
+Index: linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
 ===================================================================
---- linux-2.6.25.orig/drivers/usb/host/adm5120-hcd.c
-+++ linux-2.6.25/drivers/usb/host/adm5120-hcd.c
+--- linux-2.6.25.4.orig/drivers/usb/host/adm5120-hcd.c
++++ linux-2.6.25.4/drivers/usb/host/adm5120-hcd.c
 @@ -35,6 +35,7 @@
  #include <linux/dma-mapping.h>
  #include <linux/dmapool.h>
@@ -66,10 +66,10 @@ Index: linux-2.6.25/drivers/usb/host/adm5120-hcd.c
  }
  module_exit(admhc_hcd_mod_exit);
  
-Index: linux-2.6.25/drivers/usb/host/adm5120-dbg.c
+Index: linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
 ===================================================================
---- linux-2.6.25.orig/drivers/usb/host/adm5120-dbg.c
-+++ linux-2.6.25/drivers/usb/host/adm5120-dbg.c
+--- linux-2.6.25.4.orig/drivers/usb/host/adm5120-dbg.c
++++ linux-2.6.25.4/drivers/usb/host/adm5120-dbg.c
 @@ -390,6 +390,42 @@ static inline void remove_debug_files(st
  
  #else
diff --git a/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch b/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch
index 629ec65..b99ddc8 100644
--- a/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch
+++ b/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch
@@ -1,7 +1,7 @@
-Index: linux-2.6.25.1/drivers/ata/pata_rb153_cf.c
+Index: linux-2.6.25.4/drivers/ata/pata_rb153_cf.c
 ===================================================================
---- linux-2.6.25.1.orig/drivers/ata/pata_rb153_cf.c
-+++ linux-2.6.25.1/drivers/ata/pata_rb153_cf.c
+--- linux-2.6.25.4.orig/drivers/ata/pata_rb153_cf.c
++++ linux-2.6.25.4/drivers/ata/pata_rb153_cf.c
 @@ -68,20 +68,23 @@ static void rb153_pata_exec_command(stru
  	rb153_pata_finish_io(ap);
  }