refresh kernel patches

SVN-Revision: 21218

17 files changed, 58 insertions, 58 deletions

diff --git a/target/linux/adm5120/patches-2.6.32/001-adm5120.patch b/target/linux/adm5120/patches-2.6.32/001-adm5120.patch
index 5a5750b..c05afcb 100644
--- a/target/linux/adm5120/patches-2.6.32/001-adm5120.patch
+++ b/target/linux/adm5120/patches-2.6.32/001-adm5120.patch
@@ -32,7 +32,7 @@
  source "arch/mips/bcm63xx/Kconfig"
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -191,6 +191,22 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctre
+@@ -193,6 +193,22 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctre
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
  #
diff --git a/target/linux/adm5120/patches-2.6.32/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.32/101-cfi_fixup_macronix_bootloc.patch
index ab6d221..a44ebd5 100644
--- a/target/linux/adm5120/patches-2.6.32/101-cfi_fixup_macronix_bootloc.patch
+++ b/target/linux/adm5120/patches-2.6.32/101-cfi_fixup_macronix_bootloc.patch
@@ -55,7 +55,7 @@
  static struct cfi_fixup cfi_fixup_table[] = {
  	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
  #ifdef AMD_BOOTLOC_BUG
-@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] = 
+@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] =
  	 */
  	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
  	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
diff --git a/target/linux/adm5120/patches-2.6.32/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.32/200-amba_pl010_hacks.patch
index 41c88a9..5f32fa2 100644
--- a/target/linux/adm5120/patches-2.6.32/200-amba_pl010_hacks.patch
+++ b/target/linux/adm5120/patches-2.6.32/200-amba_pl010_hacks.patch
@@ -267,7 +267,7 @@
  }
  
  static void
-@@ -565,8 +564,8 @@ pl010_console_write(struct console *co, 
+@@ -565,8 +564,8 @@ pl010_console_write(struct console *co,
  	/*
  	 *	First save the CR then disable the interrupts
  	 */
@@ -278,7 +278,7 @@
  
  	uart_console_write(&uap->port, s, count, pl010_console_putchar);
  
-@@ -575,10 +574,10 @@ pl010_console_write(struct console *co, 
+@@ -575,10 +574,10 @@ pl010_console_write(struct console *co,
  	 *	and restore the TCR
  	 */
  	do {
diff --git a/target/linux/adm5120/patches-2.6.32/902-adm5120-usb-remove-dev-power-power_state.patch b/target/linux/adm5120/patches-2.6.32/902-adm5120-usb-remove-dev-power-power_state.patch
index 0256bc6..4fd0283 100644
--- a/target/linux/adm5120/patches-2.6.32/902-adm5120-usb-remove-dev-power-power_state.patch
+++ b/target/linux/adm5120/patches-2.6.32/902-adm5120-usb-remove-dev-power-power_state.patch
@@ -1,6 +1,6 @@
 --- a/drivers/usb/host/adm5120-dbg.c
 +++ b/drivers/usb/host/adm5120-dbg.c
-@@ -632,7 +632,7 @@ static ssize_t fill_registers_buffer(str
+@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str
  		hcd->product_desc,
  		hcd_name);
  
diff --git a/target/linux/adm5120/patches-2.6.32/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch b/target/linux/adm5120/patches-2.6.32/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch
index db6323d..aa50f8c 100644
--- a/target/linux/adm5120/patches-2.6.32/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch
+++ b/target/linux/adm5120/patches-2.6.32/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch
@@ -26,7 +26,7 @@
  
  	spin_lock_irqsave(&ahcd->lock, flags);
  	temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
-@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct 
+@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct
  
  static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
  {
diff --git a/target/linux/adm5120/patches-2.6.34/001-adm5120.patch b/target/linux/adm5120/patches-2.6.34/001-adm5120.patch
index 5a5750b..e165b04 100644
--- a/target/linux/adm5120/patches-2.6.34/001-adm5120.patch
+++ b/target/linux/adm5120/patches-2.6.34/001-adm5120.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -20,6 +20,21 @@ choice
+@@ -23,6 +23,21 @@ choice
  	prompt "System type"
  	default SGI_IP22
  
@@ -21,18 +21,18 @@
 +
  config MACH_ALCHEMY
  	bool "Alchemy processor based machines"
- 
-@@ -673,6 +688,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
+ 	select SYS_SUPPORTS_ZBOOT
+@@ -681,6 +696,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
  
  endchoice
  
 +source "arch/mips/adm5120/Kconfig"
  source "arch/mips/alchemy/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
  source "arch/mips/bcm63xx/Kconfig"
+ source "arch/mips/jazz/Kconfig"
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
-@@ -191,6 +191,22 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctre
+@@ -214,6 +214,22 @@ cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctre
  load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
  
  #
diff --git a/target/linux/adm5120/patches-2.6.34/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.34/002-adm5120_flash.patch
index 59921de..6139c4e 100644
--- a/target/linux/adm5120/patches-2.6.34/002-adm5120_flash.patch
+++ b/target/linux/adm5120/patches-2.6.34/002-adm5120_flash.patch
@@ -1,8 +1,8 @@
 --- a/drivers/mtd/maps/Kconfig
 +++ b/drivers/mtd/maps/Kconfig
-@@ -557,4 +557,8 @@ config MTD_VMU
- 	  To build this as a module select M here, the module will be called
- 	  vmu-flash.
+@@ -551,4 +551,8 @@ config MTD_PISMO
+ 
+ 	  When built as a module, it will be called pismo.ko
  
 +config MTD_ADM5120
 +	tristate "Map driver for ADM5120 based boards"
@@ -11,7 +11,7 @@
  endmenu
 --- a/drivers/mtd/maps/Makefile
 +++ b/drivers/mtd/maps/Makefile
-@@ -40,6 +40,7 @@
+@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
  obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
  obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
  obj-$(CONFIG_MTD_PCI)		+= pci.o
diff --git a/target/linux/adm5120/patches-2.6.34/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.34/003-adm5120_switch.patch
index cf6350c..fb5fb83 100644
--- a/target/linux/adm5120/patches-2.6.34/003-adm5120_switch.patch
+++ b/target/linux/adm5120/patches-2.6.34/003-adm5120_switch.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -602,6 +602,10 @@ config MIPS_AU1X00_ENET
+@@ -614,6 +614,10 @@ config MIPS_AU1X00_ENET
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
  
@@ -13,7 +13,7 @@
  	depends on PCI && SGI_IP27
 --- a/drivers/net/Makefile
 +++ b/drivers/net/Makefile
-@@ -208,6 +208,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
+@@ -213,6 +213,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
  
diff --git a/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch
index 91bd79d..b06d794 100644
--- a/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch
+++ b/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch
@@ -10,7 +10,7 @@
  obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
 --- a/include/linux/pci_ids.h
 +++ b/include/linux/pci_ids.h
-@@ -1748,6 +1748,9 @@
+@@ -1752,6 +1752,9 @@
  #define PCI_VENDOR_ID_ESDGMBH		0x12fe
  #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
  
diff --git a/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch
index 272fb8f..0258fa4 100644
--- a/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch
+++ b/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch
@@ -1,6 +1,6 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -315,4 +315,12 @@ config LEDS_TRIGGER_NETDEV
+@@ -365,4 +365,12 @@ config LEDS_TRIGGER_NETDEV
  	  This allows LEDs to be controlled by network device activity.
  	  If unsure, say Y.
  
@@ -15,7 +15,7 @@
  endif # NEW_LEDS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
-@@ -42,3 +42,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledt
+@@ -48,3 +48,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledt
  obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
  obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
  obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
diff --git a/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch
index ab6d221..4345932 100644
--- a/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch
+++ b/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch
@@ -55,7 +55,7 @@
  static struct cfi_fixup cfi_fixup_table[] = {
  	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
  #ifdef AMD_BOOTLOC_BUG
-@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] = 
+@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] =
  	 */
  	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
  	{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
@@ -67,7 +67,7 @@
  
 --- a/drivers/mtd/chips/Kconfig
 +++ b/drivers/mtd/chips/Kconfig
-@@ -198,6 +198,14 @@ config MTD_CFI_AMDSTD
+@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
  	  provides support for one of those command sets, used on chips
  	  including the AMD Am29LV320.
  
diff --git a/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch
index c8e2be4..c6d1660 100644
--- a/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch
+++ b/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch
@@ -1,6 +1,6 @@
 --- a/drivers/ata/Makefile
 +++ b/drivers/ata/Makefile
-@@ -77,6 +77,7 @@ obj-$(CONFIG_PATA_PLATFORM)	+= pata_plat
+@@ -79,6 +79,7 @@ obj-$(CONFIG_PATA_PLATFORM)	+= pata_plat
  obj-$(CONFIG_PATA_AT91)	+= pata_at91.o
  obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
  obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
@@ -10,7 +10,7 @@
  # Should be last but one libata driver
 --- a/drivers/ata/Kconfig
 +++ b/drivers/ata/Kconfig
-@@ -597,6 +597,15 @@ config PATA_RADISYS
+@@ -604,6 +604,15 @@ config PATA_RADISYS
  
  	  If unsure, say N.
  
diff --git a/target/linux/adm5120/patches-2.6.34/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.34/200-amba_pl010_hacks.patch
index 41c88a9..e458ab7 100644
--- a/target/linux/adm5120/patches-2.6.34/200-amba_pl010_hacks.patch
+++ b/target/linux/adm5120/patches-2.6.34/200-amba_pl010_hacks.patch
@@ -1,6 +1,6 @@
 --- a/drivers/serial/amba-pl010.c
 +++ b/drivers/serial/amba-pl010.c
-@@ -50,11 +50,10 @@
+@@ -51,11 +51,10 @@
  
  #include <asm/io.h>
  
@@ -14,7 +14,7 @@
  
  #define AMBA_ISR_PASS_LIMIT	256
  
-@@ -80,9 +79,9 @@ static void pl010_stop_tx(struct uart_po
+@@ -81,9 +80,9 @@ static void pl010_stop_tx(struct uart_po
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -26,7 +26,7 @@
  }
  
  static void pl010_start_tx(struct uart_port *port)
-@@ -90,9 +89,9 @@ static void pl010_start_tx(struct uart_p
+@@ -91,9 +90,9 @@ static void pl010_start_tx(struct uart_p
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -38,7 +38,7 @@
  }
  
  static void pl010_stop_rx(struct uart_port *port)
-@@ -100,9 +99,9 @@ static void pl010_stop_rx(struct uart_po
+@@ -101,9 +100,9 @@ static void pl010_stop_rx(struct uart_po
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -50,7 +50,7 @@
  }
  
  static void pl010_enable_ms(struct uart_port *port)
-@@ -110,9 +109,9 @@ static void pl010_enable_ms(struct uart_
+@@ -111,9 +110,9 @@ static void pl010_enable_ms(struct uart_
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
  	unsigned int cr;
  
@@ -62,7 +62,7 @@
  }
  
  static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -120,9 +119,9 @@ static void pl010_rx_chars(struct uart_a
+@@ -121,9 +120,9 @@ static void pl010_rx_chars(struct uart_a
  	struct tty_struct *tty = uap->port.state->port.tty;
  	unsigned int status, ch, flag, rsr, max_count = 256;
  
@@ -74,7 +74,7 @@
  		flag = TTY_NORMAL;
  
  		uap->port.icount.rx++;
-@@ -131,9 +130,9 @@ static void pl010_rx_chars(struct uart_a
+@@ -132,9 +131,9 @@ static void pl010_rx_chars(struct uart_a
  		 * Note that the error handling code is
  		 * out of the main execution path
  		 */
@@ -86,7 +86,7 @@
  
  			if (rsr & UART01x_RSR_BE) {
  				rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -163,7 +162,7 @@ static void pl010_rx_chars(struct uart_a
+@@ -164,7 +163,7 @@ static void pl010_rx_chars(struct uart_a
  		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
  
  	ignore_char:
@@ -95,7 +95,7 @@
  	}
  	spin_unlock(&uap->port.lock);
  	tty_flip_buffer_push(tty);
-@@ -176,7 +175,7 @@ static void pl010_tx_chars(struct uart_a
+@@ -177,7 +176,7 @@ static void pl010_tx_chars(struct uart_a
  	int count;
  
  	if (uap->port.x_char) {
@@ -104,7 +104,7 @@
  		uap->port.icount.tx++;
  		uap->port.x_char = 0;
  		return;
-@@ -188,7 +187,7 @@ static void pl010_tx_chars(struct uart_a
+@@ -189,7 +188,7 @@ static void pl010_tx_chars(struct uart_a
  
  	count = uap->port.fifosize >> 1;
  	do {
@@ -113,7 +113,7 @@
  		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
  		uap->port.icount.tx++;
  		if (uart_circ_empty(xmit))
-@@ -206,9 +205,9 @@ static void pl010_modem_status(struct ua
+@@ -207,9 +206,9 @@ static void pl010_modem_status(struct ua
  {
  	unsigned int status, delta;
  
@@ -125,7 +125,7 @@
  
  	delta = status ^ uap->old_status;
  	uap->old_status = status;
-@@ -236,7 +235,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -237,7 +236,7 @@ static irqreturn_t pl010_int(int irq, vo
  
  	spin_lock(&uap->port.lock);
  
@@ -134,7 +134,7 @@
  	if (status) {
  		do {
  			if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -249,7 +248,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -250,7 +249,7 @@ static irqreturn_t pl010_int(int irq, vo
  			if (pass_counter-- == 0)
  				break;
  
@@ -143,7 +143,7 @@
  		} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
  				   UART010_IIR_TIS));
  		handled = 1;
-@@ -263,7 +262,7 @@ static irqreturn_t pl010_int(int irq, vo
+@@ -264,7 +263,7 @@ static irqreturn_t pl010_int(int irq, vo
  static unsigned int pl010_tx_empty(struct uart_port *port)
  {
  	struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -152,7 +152,7 @@
  	return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
  }
  
-@@ -273,7 +272,7 @@ static unsigned int pl010_get_mctrl(stru
+@@ -274,7 +273,7 @@ static unsigned int pl010_get_mctrl(stru
  	unsigned int result = 0;
  	unsigned int status;
  
@@ -161,7 +161,7 @@
  	if (status & UART01x_FR_DCD)
  		result |= TIOCM_CAR;
  	if (status & UART01x_FR_DSR)
-@@ -299,12 +298,12 @@ static void pl010_break_ctl(struct uart_
+@@ -300,12 +299,12 @@ static void pl010_break_ctl(struct uart_
  	unsigned int lcr_h;
  
  	spin_lock_irqsave(&uap->port.lock, flags);
@@ -176,7 +176,7 @@
  	spin_unlock_irqrestore(&uap->port.lock, flags);
  }
  
-@@ -332,12 +331,12 @@ static int pl010_startup(struct uart_por
+@@ -333,12 +332,12 @@ static int pl010_startup(struct uart_por
  	/*
  	 * initialise the old status of the modem signals
  	 */
@@ -191,7 +191,7 @@
  	       uap->port.membase + UART010_CR);
  
  	return 0;
-@@ -360,10 +359,10 @@ static void pl010_shutdown(struct uart_p
+@@ -361,10 +360,10 @@ static void pl010_shutdown(struct uart_p
  	/*
  	 * disable all interrupts, disable the port
  	 */
@@ -204,7 +204,7 @@
  		~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
  	       uap->port.membase + UART010_LCRH);
  
-@@ -385,7 +384,7 @@ pl010_set_termios(struct uart_port *port
+@@ -386,7 +385,7 @@ pl010_set_termios(struct uart_port *port
  	/*
  	 * Ask the core to calculate the divisor for us.
  	 */
@@ -213,7 +213,7 @@
  	quot = uart_get_divisor(port, baud);
  
  	switch (termios->c_cflag & CSIZE) {
-@@ -448,25 +447,25 @@ pl010_set_termios(struct uart_port *port
+@@ -449,25 +448,25 @@ pl010_set_termios(struct uart_port *port
  		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
  
  	/* first, disable everything */
@@ -245,7 +245,7 @@
  
  	spin_unlock_irqrestore(&uap->port.lock, flags);
  }
-@@ -538,7 +537,7 @@ static struct uart_ops amba_pl010_pops =
+@@ -554,7 +553,7 @@ static struct uart_ops amba_pl010_pops =
  	.verify_port	= pl010_verify_port,
  };
  
@@ -254,7 +254,7 @@
  
  #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
  
-@@ -548,10 +547,10 @@ static void pl010_console_putchar(struct
+@@ -564,10 +563,10 @@ static void pl010_console_putchar(struct
  	unsigned int status;
  
  	do {
@@ -267,7 +267,7 @@
  }
  
  static void
-@@ -565,8 +564,8 @@ pl010_console_write(struct console *co, 
+@@ -581,8 +580,8 @@ pl010_console_write(struct console *co,
  	/*
  	 *	First save the CR then disable the interrupts
  	 */
@@ -278,7 +278,7 @@
  
  	uart_console_write(&uap->port, s, count, pl010_console_putchar);
  
-@@ -575,10 +574,10 @@ pl010_console_write(struct console *co, 
+@@ -591,10 +590,10 @@ pl010_console_write(struct console *co,
  	 *	and restore the TCR
  	 */
  	do {
@@ -291,7 +291,7 @@
  
  	clk_disable(uap->clk);
  }
-@@ -587,9 +586,9 @@ static void __init
+@@ -603,9 +602,9 @@ static void __init
  pl010_console_get_options(struct uart_amba_port *uap, int *baud,
  			     int *parity, int *bits)
  {
@@ -303,7 +303,7 @@
  
  		*parity = 'n';
  		if (lcr_h & UART01x_LCRH_PEN) {
-@@ -604,8 +603,8 @@ pl010_console_get_options(struct uart_am
+@@ -620,8 +619,8 @@ pl010_console_get_options(struct uart_am
  		else
  			*bits = 8;
  
@@ -314,7 +314,7 @@
  		*baud = uap->port.uartclk / (16 * (quot + 1));
  	}
  }
-@@ -623,7 +622,7 @@ static int __init pl010_console_setup(st
+@@ -639,7 +638,7 @@ static int __init pl010_console_setup(st
  	 * if so, search for the first available port that does have
  	 * console support.
  	 */
@@ -323,7 +323,7 @@
  		co->index = 0;
  	uap = amba_ports[co->index];
  	if (!uap)
-@@ -641,7 +640,7 @@ static int __init pl010_console_setup(st
+@@ -657,7 +656,7 @@ static int __init pl010_console_setup(st
  
  static struct uart_driver amba_reg;
  static struct console amba_console = {
@@ -332,7 +332,7 @@
  	.write		= pl010_console_write,
  	.device		= uart_console_device,
  	.setup		= pl010_console_setup,
-@@ -657,11 +656,11 @@ static struct console amba_console = {
+@@ -673,11 +672,11 @@ static struct console amba_console = {
  
  static struct uart_driver amba_reg = {
  	.owner			= THIS_MODULE,
diff --git a/target/linux/adm5120/patches-2.6.34/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.34/203-gpio_leds_brightness.patch
index 8bccf39..54c6468 100644
--- a/target/linux/adm5120/patches-2.6.34/203-gpio_leds_brightness.patch
+++ b/target/linux/adm5120/patches-2.6.34/203-gpio_leds_brightness.patch
@@ -1,6 +1,6 @@
 --- a/drivers/leds/leds-gpio.c
 +++ b/drivers/leds/leds-gpio.c
-@@ -44,13 +44,17 @@ static void gpio_led_set(struct led_clas
+@@ -45,13 +45,17 @@ static void gpio_led_set(struct led_clas
  		container_of(led_cdev, struct gpio_led_data, cdev);
  	int level;
  
diff --git a/target/linux/adm5120/patches-2.6.34/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.34/310-adm5120_wdt.patch
index b7833c7..0c4e8e6 100644
--- a/target/linux/adm5120/patches-2.6.34/310-adm5120_wdt.patch
+++ b/target/linux/adm5120/patches-2.6.34/310-adm5120_wdt.patch
@@ -1,6 +1,6 @@
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -790,6 +790,18 @@ config RC32434_WDT
+@@ -807,6 +807,18 @@ config RC32434_WDT
  	  To compile this driver as a module, choose M here: the
  	  module will be called rc32434_wdt.
  
@@ -21,7 +21,7 @@
  	depends on SGI_HAS_INDYDOG
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+@@ -113,6 +113,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
  obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
  obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
  obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
diff --git a/target/linux/adm5120/patches-2.6.34/902-adm5120-usb-remove-dev-power-power_state.patch b/target/linux/adm5120/patches-2.6.34/902-adm5120-usb-remove-dev-power-power_state.patch
index 0256bc6..4fd0283 100644
--- a/target/linux/adm5120/patches-2.6.34/902-adm5120-usb-remove-dev-power-power_state.patch
+++ b/target/linux/adm5120/patches-2.6.34/902-adm5120-usb-remove-dev-power-power_state.patch
@@ -1,6 +1,6 @@
 --- a/drivers/usb/host/adm5120-dbg.c
 +++ b/drivers/usb/host/adm5120-dbg.c
-@@ -632,7 +632,7 @@ static ssize_t fill_registers_buffer(str
+@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str
  		hcd->product_desc,
  		hcd_name);
  
diff --git a/target/linux/adm5120/patches-2.6.34/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch b/target/linux/adm5120/patches-2.6.34/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch
index db6323d..aa50f8c 100644
--- a/target/linux/adm5120/patches-2.6.34/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch
+++ b/target/linux/adm5120/patches-2.6.34/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch
@@ -26,7 +26,7 @@
  
  	spin_lock_irqsave(&ahcd->lock, flags);
  	temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
-@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct 
+@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct
  
  static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
  {