adm5120: move common routerboot definitions into a separate header file

Those will be used on the ar71xx platform as well.

SVN-Revision: 33341

2 files changed, 4 insertions, 92 deletions

diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c
index c2e3a5e..d9a06d9 100644
--- a/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c
+++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/module.h>
+#include <linux/routerboot.h>
 
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
diff --git a/target/linux/adm5120/files/arch/mips/include/asm/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files/arch/mips/include/asm/mach-adm5120/prom/routerboot.h
index d5ad513..91ac05a 100644
--- a/target/linux/adm5120/files/arch/mips/include/asm/mach-adm5120/prom/routerboot.h
+++ b/target/linux/adm5120/files/arch/mips/include/asm/mach-adm5120/prom/routerboot.h
@@ -9,10 +9,8 @@
  *
  */
 
-#ifndef _ROUTERBOOT_H
-#define _ROUTERBOOT_H
-
-#define RB_MAC_SIZE		6
+#ifndef _PROM_ROUTERBOOT_H_
+#define _PROM_ROUTERBOOT_H_
 
 struct rb_bios_settings {
 	u32	hs_offs; /* hard settings offset */
@@ -30,96 +28,9 @@ struct rb_hard_settings {
 	u8	*mac_base;	/* mac address base */
 };
 
-/*
- * Magic numbers
- */
-#define RB_MAGIC_HARD	0x64726148 /* "Hard" */
-#define RB_MAGIC_SOFT	0x74666F53 /* "Soft" */
-#define RB_MAGIC_DAWN	0x6E776144 /* "Dawn" */
-
-#define RB_ID_TERMINATOR	0
-
-/*
- * ID values for Hardware settings
- */
-#define RB_ID_HARD_01		1
-#define RB_ID_HARD_02		2
-#define RB_ID_FLASH_INFO	3
-#define RB_ID_MAC_ADDRESS_PACK	4
-#define RB_ID_BOARD_NAME	5
-#define RB_ID_BIOS_VERSION	6
-#define RB_ID_HARD_07		7
-#define RB_ID_SDRAM_TIMINGS	8
-#define RB_ID_DEVICE_TIMINGS	9
-#define RB_ID_SOFTWARE_ID	10
-#define RB_ID_SERIAL_NUMBER	11
-#define RB_ID_HARD_12		12
-#define RB_ID_MEMORY_SIZE	13
-#define RB_ID_MAC_ADDRESS_COUNT	14
-
-/*
- * ID values for Software settings
- */
-#define RB_ID_UART_SPEED	1
-#define RB_ID_BOOT_DELAY	2
-#define RB_ID_BOOT_DEVICE	3
-#define RB_ID_BOOT_KEY		4
-#define RB_ID_CPU_MODE		5
-#define RB_ID_FW_VERSION	6
-#define RB_ID_SOFT_07		7
-#define RB_ID_SOFT_08		8
-#define RB_ID_BOOT_PROTOCOL	9
-#define RB_ID_SOFT_10		10
-#define RB_ID_SOFT_11		11
-
-/*
- * UART_SPEED values
- */
-#define RB_UART_SPEED_115200	0
-#define RB_UART_SPEED_57600	1
-#define RB_UART_SPEED_38400	2
-#define RB_UART_SPEED_19200	3
-#define RB_UART_SPEED_9600	4
-#define RB_UART_SPEED_4800	5
-#define RB_UART_SPEED_2400	6
-#define RB_UART_SPEED_1200	7
-
-/*
- * BOOT_DELAY values
- */
-#define RB_BOOT_DELAY_0SEC	0
-#define RB_BOOT_DELAY_1SEC	1
-#define RB_BOOT_DELAY_2SEC	2
-
-/*
- * BOOT_DEVICE values
- */
-#define RB_BOOT_DEVICE_ETHER	0
-#define RB_BOOT_DEVICE_NANDETH	1
-#define RB_BOOT_DEVICE_ETHONCE	2
-#define RB_BOOT_DEVICE_NANDONLY	3
-
-/*
- * BOOT_KEY values
- */
-#define RB_BOOT_KEY_ANY		0
-#define RB_BOOT_KEY_DEL		1
-
-/*
- * CPU_MODE values
- */
-#define RB_CPU_MODE_POWERSAVE	0
-#define RB_CPU_MODE_REGULAR	1
-
-/*
- * BOOT_PROTOCOL values
- */
-#define RB_BOOT_PROTOCOL_BOOTP	0
-#define RB_BOOT_PROTOCOL_DHCP	1
-
 extern int routerboot_present(void) __init;
 extern char *routerboot_get_boardname(void);
 
 extern struct rb_hard_settings rb_hs;
 
-#endif /* _ROUTERBOOT_H */
+#endif /* _PROM_ROUTERBOOT_H_ */