Merge branch 'adm8668'

SVN-Revision: 23900

3 files changed, 103 insertions, 0 deletions

diff --git a/target/linux/adm8668/patches-2.6.36/001-adm8668_arch.patch b/target/linux/adm8668/patches-2.6.36/001-adm8668_arch.patch
new file mode 100644
index 0000000..81cac43
--- /dev/null
+++ b/target/linux/adm8668/patches-2.6.36/001-adm8668_arch.patch
@@ -0,0 +1,37 @@
+--- a/arch/mips/Kbuild.platforms	2010-10-20 16:30:22.000000000 -0400
++++ b/arch/mips/Kbuild.platforms	2010-10-22 08:42:06.228968083 -0400
+@@ -27,6 +27,7 @@
+ platforms += txx9
+ platforms += vr41xx
+ platforms += wrppmc
++platforms += adm8668
+
+ # include the platform specific files
+ include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))
+--- a/arch/mips/Kconfig	2010-10-20 16:30:22.000000000 -0400
++++ b/arch/mips/Kconfig	2010-10-22 08:37:31.016965108 -0400
+@@ -82,6 +82,24 @@
+ 	help
+ 	 Support for BCM47XX based boards
+
++config ADM8668
++	bool "WildPass ADM8668"
++	select SYS_HAS_CPU_MIPS32_R1
++	select IRQ_CPU
++	select CEVT_R4K
++	select CSRC_R4K
++	select HW_HAS_PCI
++	select PCI
++	select SYS_SUPPORTS_LITTLE_ENDIAN
++	select SYS_SUPPORTS_32BIT_KERNEL
++	select DMA_NONCOHERENT
++	select SWAP_IO_SPACE
++	select SERIAL_ADM8668
++	select SERIAL_ADM8668_CONSOLE
++	help
++		ADM8668 board support by neutronscott
++		Scott Nicholas <neutronscott@scottn.us>
++
+ config BCM63XX
+ 	bool "Broadcom BCM63XX based boards"
+ 	select CEVT_R4K
diff --git a/target/linux/adm8668/patches-2.6.36/002-adm8668_uart.patch b/target/linux/adm8668/patches-2.6.36/002-adm8668_uart.patch
new file mode 100644
index 0000000..44fcd29
--- /dev/null
+++ b/target/linux/adm8668/patches-2.6.36/002-adm8668_uart.patch
@@ -0,0 +1,41 @@
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -1510,6 +1510,25 @@
+ 	  If you have enabled the serial port on the bcm63xx CPU
+ 	  you can make it the console by answering Y to this option.
+
++config SERIAL_ADM8668
++	tristate "ADM8668 serial port support"
++	select SERIAL_CORE
++	depends on ADM8668
++	help
++	  If you have an adm8668 CPU, you can enable its onboard
++	  serial port by enabling this options.
++
++          To compile this driver as a module, choose M here: the
++          module will be called adm8668_uart.
++
++config SERIAL_ADM8668_CONSOLE
++	bool "Console on adm8668 serial port"
++	depends on SERIAL_ADM8668=y
++	select SERIAL_CORE_CONSOLE
++	help
++	  If you have enabled the serial port on the adm8668 CPU
++	  you can make it the console by answering Y to this option.
++
+ config SERIAL_GRLIB_GAISLER_APBUART
+ 	tristate "GRLIB APBUART serial support"
+ 	depends on OF
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -196,6 +196,9 @@
+ /* High Speed UART for Medfield */
+ #define PORT_MFD	95
+
++/* ADM8668 UART */
++#define	PORT_ADM8668	93
++
+ #ifdef __KERNEL__
+
+ #include <linux/compiler.h>
+
diff --git a/target/linux/adm8668/patches-2.6.36/003-adm8668_nor_map.patch b/target/linux/adm8668/patches-2.6.36/003-adm8668_nor_map.patch
new file mode 100644
index 0000000..59fba58
--- /dev/null
+++ b/target/linux/adm8668/patches-2.6.36/003-adm8668_nor_map.patch
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -103,6 +103,12 @@
+ 	default "0x02000000"
+ 	depends on MSP_FLASH_MAP_LIMIT_32M
+
++config MTD_ADM8668_NOR
++	tristate "ADM8668 NOR mapping"
++	depends on ADM8668 && MTD_CFI
++	help
++	  mapping driver for ADM8668 NOR
++
+ config MTD_SUN_UFLASH
+ 	tristate "Sun Microsystems userflash support"
+ 	depends on SPARC && MTD_CFI && PCI
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -7,6 +7,7 @@
+ endif
+
+ # Chip mappings
++obj-$(CONFIG_MTD_ADM8668_NOR)	+= adm8668.o
+ obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
+ obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
+ obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o