apm821xx: add support for the Western Digital MyBook Live Series

Hardware Highlights:

This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC  UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
     32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM:  256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610

WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!

The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.

This target produces two images for a target.
 1. ext4 image
    The extracted/raw image can be directly installed on
    the internal HDD via "dd if=img.ext4 of=/dev/sdX".

    This can either be done in place with the stock MyBook Live
    firmware via ssh. Or by removing the HDD and writing the image
    with a different PC.

    The the compressed images are useful for sysupgrade.

 2. recovery.tar image for TFTP and Serial.

    extract the recovery.tar to a TFTP server directory.

    On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
    # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self

    Where 192.168.1.254 is your TFTP server.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

7 files changed, 74 insertions, 0 deletions

diff --git a/target/linux/apm821xx/base-files/etc/board.d/01_leds b/target/linux/apm821xx/base-files/etc/board.d/01_leds
index d5f4cc9..bcc7a9f 100755
--- a/target/linux/apm821xx/base-files/etc/board.d/01_leds
+++ b/target/linux/apm821xx/base-files/etc/board.d/01_leds
@@ -16,6 +16,9 @@ mr24)
 	ucidef_set_led_wlan "wlan4" "WLAN4" "mr24:green:wifi4" "phy0tpt"
 	;;
 
+mbl)
+	;;
+
 *)
 	;;
 esac
diff --git a/target/linux/apm821xx/base-files/etc/board.d/02_network b/target/linux/apm821xx/base-files/etc/board.d/02_network
index 4d53b2f..9525d8c 100755
--- a/target/linux/apm821xx/base-files/etc/board.d/02_network
+++ b/target/linux/apm821xx/base-files/etc/board.d/02_network
@@ -9,6 +9,7 @@ board_config_update
 board=$(apm821xx_board_name)
 
 case "$board" in
+mbl | \
 mr24)
 	ucidef_set_interface_lan "eth0"
 	;;
diff --git a/target/linux/apm821xx/base-files/etc/diag.sh b/target/linux/apm821xx/base-files/etc/diag.sh
index 58301f8..bea66eb 100755
--- a/target/linux/apm821xx/base-files/etc/diag.sh
+++ b/target/linux/apm821xx/base-files/etc/diag.sh
@@ -5,6 +5,10 @@
 
 get_status_led() {
 	case $(apm821xx_board_name) in
+	mbl)
+		status_led="mbl:green:power"
+		;;
+
 	mr24)
 		status_led="mr24:green:power"
 		;;
diff --git a/target/linux/apm821xx/base-files/lib/apm821xx.sh b/target/linux/apm821xx/base-files/lib/apm821xx.sh
index 82f85c5..98e88cf 100755
--- a/target/linux/apm821xx/base-files/lib/apm821xx.sh
+++ b/target/linux/apm821xx/base-files/lib/apm821xx.sh
@@ -14,6 +14,10 @@ apm821xx_board_detect() {
 		name="mr24"
 		;;
 
+	*"MyBook Live"*)
+		name="mbl"
+		;;
+
 	*)
 		name="unknown"
 		;;
diff --git a/target/linux/apm821xx/base-files/lib/preinit/79_move_config b/target/linux/apm821xx/base-files/lib/preinit/79_move_config
new file mode 100644
index 0000000..7c651b8
--- /dev/null
+++ b/target/linux/apm821xx/base-files/lib/preinit/79_move_config
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+BOOTPART=/dev/sda1
+
+move_config() {
+	if [ -b $BOOTPART ]; then
+		mkdir -p /boot
+		mount -t ext4 -o rw,noatime $BOOTPART /boot
+		[ -f /boot/sysupgrade.tgz ] && mv -f /boot/sysupgrade.tgz /
+	fi
+}
+
+boot_hook_add preinit_mount_root move_config
diff --git a/target/linux/apm821xx/base-files/lib/upgrade/platform.sh b/target/linux/apm821xx/base-files/lib/upgrade/platform.sh
index ddf775f..d5b0986 100755
--- a/target/linux/apm821xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/apm821xx/base-files/lib/upgrade/platform.sh
@@ -11,6 +11,11 @@ platform_check_image() {
 	[ "$#" -gt 1 ] && return 1
 
 	case "$board" in
+	mbl)
+		mbl_do_platform_check $board "$1"
+		return $?;
+		;;
+
 	mr24)
 		merakinand_do_platform_check $board "$1"
 		return $?;
@@ -41,6 +46,10 @@ platform_do_upgrade() {
 	local board=$(apm821xx_board_name)
 
 	case "$board" in
+	mbl)
+		mbl_do_upgrade "$ARGV"
+		;;
+
 	*)
 		default_do_upgrade "$ARGV"
 		;;
@@ -51,6 +60,10 @@ platform_copy_config() {
 	local board=$(apm821xx_board_name)
 
 	case "$board" in
+	mbl)
+		mbl_copy_config
+		;;
+
 	*)
 		;;
 	esac
diff --git a/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh
new file mode 100644
index 0000000..d734751
--- /dev/null
+++ b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh
@@ -0,0 +1,36 @@
+. /lib/functions.sh
+
+get_magic_at() {
+	local file="$1"
+	local pos="$2"
+	get_image "$file" | dd bs=1 count=2 skip="$pos" 2>/dev/null | hexdump -v -n 2 -e '1/1 "%02x"'
+}
+
+mbl_do_platform_check() {
+	local board="$1"
+	local file="$2"
+	local magic
+
+	magic=$(get_magic_at "$file" 510)
+
+	[ "$magic" != "55aa" ] && {
+		echo "Failed to verify MBR boot signature."
+		return 1
+	}
+
+	return 0;
+}
+
+mbl_do_upgrade() {
+	sync
+	get_image "$1" | dd of=/dev/sda bs=2M conv=fsync
+	sleep 1
+}
+
+mbl_copy_config() {
+	mkdir -p /boot
+	[ -f /boot/uImage ] || mount -t ext4 -o rw,noatime /dev/sda1 /boot
+	cp -af "$CONF_TAR" /boot/
+	sync
+	umount /boot
+}