diff options
| author | Ben Greear <greearb@candelatech.com> | 2016-10-17 14:23:01 -0700 |
|---|---|---|
| committer | Felix Fietkau <nbd@nbd.name> | 2016-10-19 11:13:15 +0200 |
| commit | 1ffb7e47be92e32a08d866399af83d4136e28e06 (patch) | |
| tree | 31cc24329a05064913da7a9b0c2dce6e63a6fb23 /target/linux/apm821xx/sata/profiles | |
| parent | 536420647a124f7330cfed323c36fa17c0824550 (diff) | |
| download | mtk-20170518-1ffb7e47be92e32a08d866399af83d4136e28e06.zip mtk-20170518-1ffb7e47be92e32a08d866399af83d4136e28e06.tar.gz mtk-20170518-1ffb7e47be92e32a08d866399af83d4136e28e06.tar.bz2 | |
Latest ath10k CT 988X firmware (beta-18).
* Backport much of the 10.2 firmware features from upstream QCA driver.
This includes ANI support, adaptive CCA, tx-hang workarounds,
and lots of other things.
Not all of this may be enabled at this point, and more code waits to
be backported as time and motivation allows.
* Fix some rate-control issues where ath10k in station mode (at least), would
sometimes get stuck at low rates. This appeared to be a probe related
state machine issue in the firmware, so I added some timeout logic to kick
the state machine if it gets stuck. This signicantly improves throughput
tests with many stations.
* Support configuring WMI WD timeout using SET_SPECIAL API.
* Properly configure the rx-mask on bootup to work around problem found
by Mr. Kazior. This should remove the need to add the driver hack he
posted.
* Allow configuring pdev failed-retry threshold. This is how many consecutive
tx failures the firmware will allow before resetting the wifi chip (not a full
firmware crash).
Signed-off-by: Ben Greear <greearb@candelatech.com>
Diffstat (limited to 'target/linux/apm821xx/sata/profiles')
0 files changed, 0 insertions, 0 deletions