add support for 2.6.37, thanks Wipster!

SVN-Revision: 25569

10 files changed, 506 insertions, 0 deletions

diff --git a/target/linux/ar7/patches-2.6.37/110-flash.patch b/target/linux/ar7/patches-2.6.37/110-flash.patch
new file mode 100644
index 0000000..0d14c97
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.37/110-flash.patch
@@ -0,0 +1,11 @@
+--- a/drivers/mtd/maps/physmap.c
++++ b/drivers/mtd/maps/physmap.c
+@@ -79,7 +79,7 @@ static const char *rom_probe_types[] = {
+ 					"map_rom",
+ 					NULL };
+ #ifdef CONFIG_MTD_PARTITIONS
+-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
++static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
+ #endif
+ 
+ static int physmap_flash_probe(struct platform_device *dev)
diff --git a/target/linux/ar7/patches-2.6.37/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.37/120-gpio_chrdev.patch
new file mode 100644
index 0000000..aba45c0
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.37/120-gpio_chrdev.patch
@@ -0,0 +1,28 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -990,6 +990,15 @@ config MWAVE
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called mwave.
+ 
++config AR7_GPIO
++	tristate "TI AR7 GPIO Support"
++	depends on AR7
++	help
++	  Give userspace access to the GPIO pins on the Texas Instruments AR7
++	  processors.
++
++	  If compiled as a module, it will be called ar7_gpio.
++
+ config SCx200_GPIO
+ 	tristate "NatSemi SCx200 GPIO Support"
+ 	depends on SCx200
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -94,6 +94,7 @@ obj-$(CONFIG_HW_RANDOM)		+= hw_random/
+ obj-$(CONFIG_PPDEV)		+= ppdev.o
+ obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
+ obj-$(CONFIG_NWFLASH)		+= nwflash.o
++obj-$(CONFIG_AR7_GPIO)		+= ar7_gpio.o
+ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
+ obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
diff --git a/target/linux/ar7/patches-2.6.37/160-vlynq_try_remote_first.patch b/target/linux/ar7/patches-2.6.37/160-vlynq_try_remote_first.patch
new file mode 100644
index 0000000..b98931e
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.37/160-vlynq_try_remote_first.patch
@@ -0,0 +1,20 @@
+--- a/drivers/vlynq/vlynq.c
++++ b/drivers/vlynq/vlynq.c
+@@ -515,9 +515,14 @@ static int __vlynq_enable_device(struct
+ 				!__vlynq_try_external(dev))
+ 				return 0;
+ 		} else {
+-			if (!__vlynq_try_external(dev) ||
+-				!__vlynq_try_local(dev)    ||
+-				!__vlynq_try_remote(dev))
++            /* XXX: I don't really know what difference it makes, if the order
++             * of the following calls is changed, but at least in this order
++             * my fritzbox doesn't hang at startup as in
++             * https://dev.openwrt.org/ticket/7324
++             */
++			if (!__vlynq_try_remote(dev) ||
++				!__vlynq_try_local(dev)  ||
++				!__vlynq_try_external(dev))
+ 				return 0;
+ 		}
+ 		break;
diff --git a/target/linux/ar7/patches-2.6.37/170-clocks_init_earlier.patch b/target/linux/ar7/patches-2.6.37/170-clocks_init_earlier.patch
new file mode 100644
index 0000000..6f09317
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.37/170-clocks_init_earlier.patch
@@ -0,0 +1,20 @@
+--- a/arch/mips/ar7/time.c
++++ b/arch/mips/ar7/time.c
+@@ -33,6 +33,8 @@ void __init plat_time_init(void)
+ 	/* Initialize ar7 clocks so the CPU clock frequency is correct */
+ 	ar7_init_clocks();
+ 
++	ar7_init_clocks();
++
+ 	cpu_clk = clk_get(NULL, "cpu");
+ 	if (IS_ERR(cpu_clk)) {
+ 		printk(KERN_ERR "unable to get cpu clock\n");
+--- a/arch/mips/include/asm/mach-ar7/ar7.h
++++ b/arch/mips/include/asm/mach-ar7/ar7.h
+@@ -203,4 +203,6 @@ static inline void ar7_device_off(u32 bi
+ int __init ar7_gpio_init(void);
+ void __init ar7_init_clocks(void);
+ 
++extern void __init ar7_init_clocks(void);
++
+ #endif /* __AR7_H__ */
diff --git a/target/linux/ar7/patches-2.6.37/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.37/500-serial_kludge.patch
new file mode 100644
index 0000000..b0eda47
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.37/500-serial_kludge.patch
@@ -0,0 +1,28 @@
+--- a/drivers/serial/8250.c
++++ b/drivers/serial/8250.c
+@@ -302,6 +302,13 @@ static const struct serial8250_config ua
+ 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ 		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+ 	},
++	[PORT_AR7] = {
++		.name		= "TI-AR7",
++		.fifo_size	= 16,
++		.tx_loadsz	= 16,
++		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
++		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
++	},
+ };
+ 
+ #if defined(CONFIG_MIPS_ALCHEMY)
+@@ -2773,7 +2780,11 @@ static void serial8250_console_putchar(s
+ {
+ 	struct uart_8250_port *up = (struct uart_8250_port *)port;
+ 
++#ifdef CONFIG_AR7
++	wait_for_xmitr(up, BOTH_EMPTY);
++#else
+ 	wait_for_xmitr(up, UART_LSR_THRE);
++#endif
+ 	serial_out(up, UART_TX, ch);
+ }
+ 
diff --git a/target/linux/ar7/patches-2.6.37/920-ar7part.patch b/target/linux/ar7/patches-2.6.37/920-ar7part.patch
new file mode 100644
index 0000000..8495855
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.37/920-ar7part.patch
@@ -0,0 +1,55 @@
+--- a/drivers/mtd/ar7part.c
++++ b/drivers/mtd/ar7part.c
+@@ -27,12 +27,14 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/bootmem.h>
+ #include <linux/magic.h>
++#include <asm/mach-ar7/prom.h>
+ 
+ #define AR7_PARTS	4
+ #define ROOT_OFFSET	0xe0000
+ 
+ #define LOADER_MAGIC1	le32_to_cpu(0xfeedfa42)
+ #define LOADER_MAGIC2	le32_to_cpu(0xfeed1281)
++#define LOADER_MAGIC3	le32_to_cpu(0x434d4d4c)
+ 
+ #ifndef SQUASHFS_MAGIC
+ #define SQUASHFS_MAGIC	0x73717368
+@@ -44,6 +46,10 @@ struct ar7_bin_rec {
+ 	unsigned int address;
+ };
+ 
++int create_titan_partitions(struct mtd_info *master,
++        struct mtd_partition **pparts,
++        unsigned long origin);
++
+ static int create_mtd_partitions(struct mtd_info *master,
+ 				 struct mtd_partition **pparts,
+ 				 unsigned long origin)
+@@ -57,6 +63,16 @@ static int create_mtd_partitions(struct
+ 	int retries = 10;
+ 	struct mtd_partition *ar7_parts;
+ 
++	const char *prod_id ;
++	prod_id = prom_getenv("ProductID");
++	if(prod_id && 
++		(strcmp(prod_id, "CYWL")==0 ||
++		strcmp(prod_id, "CYWM")==0 ||
++		strcmp(prod_id, "CYLM")==0 ||
++		strcmp(prod_id, "CYLL")==0)){
++		return create_titan_partitions(master, pparts, origin);
++	}
++
+ 	ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL);
+ 	if (!ar7_parts)
+ 		return -ENOMEM;
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
++obj-$(CONFIG_MTD_AR7_PARTS)	+= titanpart.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
diff --git a/target/linux/ar7/patches-2.6.37/930-ar7_early_gpio_init.patch b/target/linux/ar7/patches-2.6.37/930-ar7_early_gpio_init.patch
new file mode 100644
index 0000000..05eee04
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.37/930-ar7_early_gpio_init.patch
@@ -0,0 +1,9 @@
+--- a/arch/mips/include/asm/mach-ar7/ar7.h
++++ b/arch/mips/include/asm/mach-ar7/ar7.h
+@@ -205,4 +205,6 @@ void __init ar7_init_clocks(void);
+ 
+ extern void __init ar7_init_clocks(void);
+ 
++int __init ar7_gpio_init(void);
++
+ #endif /* __AR7_H__ */
diff --git a/target/linux/ar7/patches-2.6.37/950-cpmac_titan.patch b/target/linux/ar7/patches-2.6.37/950-cpmac_titan.patch
new file mode 100644
index 0000000..65a5b70
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.37/950-cpmac_titan.patch
@@ -0,0 +1,49 @@
+--- a/drivers/net/cpmac.c
++++ b/drivers/net/cpmac.c
+@@ -1155,6 +1155,8 @@ static int __devinit cpmac_probe(struct
+ 		goto fail;
+ 	}
+ 
++	ar7_device_reset(pdata->reset_bit);
++
+ 	dev->irq = platform_get_irq_byname(pdev, "irq");
+ 
+ 	dev->netdev_ops = &cpmac_netdev_ops;
+@@ -1231,7 +1233,7 @@ int __devinit cpmac_init(void)
+ 	cpmac_mii->reset = cpmac_mdio_reset;
+ 	cpmac_mii->irq = mii_irqs;
+ 
+-	cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256);
++	cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256);
+ 
+ 	if (!cpmac_mii->priv) {
+ 		printk(KERN_ERR "Can't ioremap mdio registers\n");
+@@ -1242,10 +1244,16 @@ int __devinit cpmac_init(void)
+ #warning FIXME: unhardcode gpio&reset bits
+ 	ar7_gpio_disable(26);
+ 	ar7_gpio_disable(27);
+-	ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
+-	ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
++
++	if (!ar7_is_titan()) {
++		ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
++		ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
++	}
+ 	ar7_device_reset(AR7_RESET_BIT_EPHY);
+ 
++	if (ar7_is_titan())
++		ar7_device_reset(TITAN_RESET_BIT_EPHY1);
++
+ 	cpmac_mii->reset(cpmac_mii);
+ 
+ 	for (i = 0; i < 300; i++)
+@@ -1260,7 +1268,8 @@ int __devinit cpmac_init(void)
+ 		mask = 0;
+ 	}
+ 
+-	cpmac_mii->phy_mask = ~(mask | 0x80000000);
++	cpmac_mii->phy_mask = ar7_is_titan()? ~(mask | 0x80000000 | 0x40000000) :
++		~(mask | 0x80000000);
+ 	snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "1");
+ 
+ 	res = mdiobus_register(cpmac_mii);
diff --git a/target/linux/ar7/patches-2.6.37/972-cpmac_fixup.patch b/target/linux/ar7/patches-2.6.37/972-cpmac_fixup.patch
new file mode 100644
index 0000000..2f56615
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.37/972-cpmac_fixup.patch
@@ -0,0 +1,216 @@
+--- a/arch/mips/ar7/platform.c
++++ b/arch/mips/ar7/platform.c
+@@ -33,7 +33,6 @@
+ #include <linux/string.h>
+ #include <linux/etherdevice.h>
+ #include <linux/phy.h>
+-#include <linux/phy_fixed.h>
+ #include <linux/gpio.h>
+ #include <linux/clk.h>
+ 
+@@ -248,12 +247,6 @@ static struct resource cpmac_high_res[]
+ 	},
+ };
+ 
+-static struct fixed_phy_status fixed_phy_status __initdata = {
+-	.link		= 1,
+-	.speed		= 100,
+-	.duplex		= 1,
+-};
+-
+ static struct plat_cpmac_data cpmac_low_data = {
+ 	.reset_bit	= 17,
+ 	.power_bit	= 20,
+@@ -643,26 +636,18 @@ static int __init ar7_register_devices(v
+ 	}
+ 
+ 	if (ar7_has_high_cpmac()) {
+-		res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
+-		if (!res) {
+-			cpmac_get_mac(1, cpmac_high_data.dev_addr);
+-
+-			res = platform_device_register(&cpmac_high);
+-			if (res)
+-				pr_warning("unable to register cpmac-high: %d\n", res);
+-		} else
+-			pr_warning("unable to add cpmac-high phy: %d\n", res);
+-	} else
+-		cpmac_low_data.phy_mask = 0xffffffff;
++		cpmac_get_mac(1, cpmac_high_data.dev_addr);
+ 
+-	res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
+-	if (!res) {
+-		cpmac_get_mac(0, cpmac_low_data.dev_addr);
+-		res = platform_device_register(&cpmac_low);
++		res = platform_device_register(&cpmac_high);
+ 		if (res)
+-			pr_warning("unable to register cpmac-low: %d\n", res);
++			pr_warning("unable to register cpmac-high: %d\n", res);
+ 	} else
+-		pr_warning("unable to add cpmac-low phy: %d\n", res);
++		cpmac_low_data.phy_mask = 0xffffffff;
++
++	cpmac_get_mac(0, cpmac_low_data.dev_addr);
++	res = platform_device_register(&cpmac_low);
++	if (res)
++		pr_warning("unable to register cpmac-low: %d\n", res);
+ 
+ 	detect_leds();
+ 	res = platform_device_register(&ar7_gpio_leds);
+@@ -675,8 +660,10 @@ static int __init ar7_register_devices(v
+ 
+ 	/* Register watchdog only if enabled in hardware */
+ 	bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
+-	val = readl(bootcr);
+-	iounmap(bootcr);
++	if (bootcr) {
++		val = readl(bootcr);
++		iounmap(bootcr);
++	}
+ 	if (val & AR7_WDT_HW_ENA) {
+ 		if (ar7_has_high_vlynq())
+ 			ar7_wdt_res.start = UR8_REGS_WDT;
+--- a/arch/mips/include/asm/mach-ar7/ar7.h
++++ b/arch/mips/include/asm/mach-ar7/ar7.h
+@@ -42,6 +42,7 @@
+ #define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C)
+ #define AR7_REGS_VLYNQ0	(AR7_REGS_BASE + 0x1800)
+ #define AR7_REGS_DCL	(AR7_REGS_BASE + 0x1a00)
++#define AR7_REGS_MII	(AR7_REGS_BASE + 0x1a08)
+ #define AR7_REGS_VLYNQ1	(AR7_REGS_BASE + 0x1c00)
+ #define AR7_REGS_MDIO	(AR7_REGS_BASE + 0x1e00)
+ #define AR7_REGS_IRQ	(AR7_REGS_BASE + 0x2400)
+--- a/drivers/net/cpmac.c
++++ b/drivers/net/cpmac.c
+@@ -34,7 +34,6 @@
+ #include <linux/skbuff.h>
+ #include <linux/mii.h>
+ #include <linux/phy.h>
+-#include <linux/phy_fixed.h>
+ #include <linux/platform_device.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/clk.h>
+@@ -47,14 +46,11 @@ MODULE_LICENSE("GPL");
+ MODULE_ALIAS("platform:cpmac");
+ 
+ static int debug_level = 8;
+-static int dumb_switch;
+ 
+-/* Next 2 are only used in cpmac_probe, so it's pointless to change them */
++/* Next is only used in cpmac_probe, so it's pointless to change them */
+ module_param(debug_level, int, 0444);
+-module_param(dumb_switch, int, 0444);
+ 
+ MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable");
+-MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
+ 
+ #define CPMAC_VERSION "0.5.2"
+ /* frame size + 802.1q tag + FCS size */
+@@ -673,9 +669,8 @@ static void cpmac_hw_start(struct net_de
+ 	for (i = 0; i < 8; i++)
+ 		cpmac_write(priv->regs, CPMAC_MAC_ADDR_LO(i), dev->dev_addr[5]);
+ 	cpmac_write(priv->regs, CPMAC_MAC_ADDR_MID, dev->dev_addr[4]);
+-	cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, dev->dev_addr[0] |
+-		    (dev->dev_addr[1] << 8) | (dev->dev_addr[2] << 16) |
+-		    (dev->dev_addr[3] << 24));
++	cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, be32_to_cpu(*(u32 *)
++			dev->dev_addr));
+ 	cpmac_write(priv->regs, CPMAC_MAX_LENGTH, CPMAC_SKB_SIZE);
+ 	cpmac_write(priv->regs, CPMAC_UNICAST_CLEAR, 0xff);
+ 	cpmac_write(priv->regs, CPMAC_RX_INT_CLEAR, 0xff);
+@@ -1107,8 +1102,6 @@ static const struct net_device_ops cpmac
+ 	.ndo_set_mac_address	= eth_mac_addr,
+ };
+ 
+-static int external_switch;
+-
+ static int __devinit cpmac_probe(struct platform_device *pdev)
+ {
+ 	int rc, phy_id;
+@@ -1120,25 +1113,18 @@ static int __devinit cpmac_probe(struct
+ 
+ 	pdata = pdev->dev.platform_data;
+ 
+-	if (external_switch || dumb_switch) {
+-		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+-		phy_id = pdev->id;
+-	} else {
+-		for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+-			if (!(pdata->phy_mask & (1 << phy_id)))
+-				continue;
+-			if (!cpmac_mii->phy_map[phy_id])
+-				continue;
+-			strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
+-			break;
+-		}
++	for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
++		if (!(pdata->phy_mask & (1 << phy_id)))
++			continue;
++		if (!cpmac_mii->phy_map[phy_id])
++			continue;
++		strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
++		break;
+ 	}
+ 
+ 	if (phy_id == PHY_MAX_ADDR) {
+-		dev_err(&pdev->dev, "no PHY present, falling back "
+-					"to switch on MDIO bus 0\n");
+-		strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+-		phy_id = pdev->id;
++		printk(KERN_ERR "cpmac: No PHY present\n");
++		return -ENXIO;
+ 	}
+ 
+ 	dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
+@@ -1227,6 +1213,7 @@ int __devinit cpmac_init(void)
+ {
+ 	u32 mask;
+ 	int i, res;
++	void __iomem *mii_reg;
+ 
+ 	cpmac_mii = mdiobus_alloc();
+ 	if (cpmac_mii == NULL)
+@@ -1250,14 +1237,14 @@ int __devinit cpmac_init(void)
+ 	ar7_gpio_disable(26);
+ 	ar7_gpio_disable(27);
+ 
+-	if (!ar7_is_titan()) {
++	if (ar7_is_titan()) {
++		ar7_device_reset(AR7_RESET_BIT_EPHY);
++		ar7_device_reset(TITAN_RESET_BIT_EPHY1);
++	} else {
++		ar7_device_reset(AR7_RESET_BIT_EPHY);
+ 		ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
+ 		ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
+ 	}
+-	ar7_device_reset(AR7_RESET_BIT_EPHY);
+-
+-	if (ar7_is_titan())
+-		ar7_device_reset(TITAN_RESET_BIT_EPHY1);
+ 
+ 	cpmac_mii->reset(cpmac_mii);
+ 
+@@ -1269,10 +1256,20 @@ int __devinit cpmac_init(void)
+ 			msleep(10);
+ 	}
+ 
+-	mask &= 0x7fffffff;
++	mask &= ar7_is_titan()? ~(0x80000000 | 0x40000000) : ~(0x80000000);
+ 	if (mask & (mask - 1)) {
+-		external_switch = 1;
+-		mask = 0;
++		if (ar7_is_titan()) {
++			ar7_device_disable(AR7_RESET_BIT_EPHY);
++			ar7_device_disable(TITAN_RESET_BIT_EPHY1);
++		} else
++			ar7_device_disable(AR7_RESET_BIT_EPHY);
++
++		//Titan remap might be different
++		mii_reg = ioremap(AR7_REGS_MII, 4);
++		if (mii_reg) {
++			writel(readl(mii_reg) | 1, mii_reg);
++			iounmap(mii_reg);
++		}
+ 	}
+ 
+ 	cpmac_mii->phy_mask = ar7_is_titan()? ~(mask | 0x80000000 | 0x40000000) :
diff --git a/target/linux/ar7/patches-2.6.37/973-cpmac_handle_mvswitch.patch b/target/linux/ar7/patches-2.6.37/973-cpmac_handle_mvswitch.patch
new file mode 100644
index 0000000..78aafd6
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.37/973-cpmac_handle_mvswitch.patch
@@ -0,0 +1,70 @@
+--- a/drivers/net/cpmac.c
++++ b/drivers/net/cpmac.c
+@@ -372,6 +372,7 @@ static struct sk_buff *cpmac_rx_one(stru
+ 				    struct cpmac_desc *desc)
+ {
+ 	struct sk_buff *skb, *result = NULL;
++	int offset;
+ 
+ 	if (unlikely(netif_msg_hw(priv)))
+ 		cpmac_dump_desc(priv->dev, desc);
+@@ -383,10 +384,15 @@ static struct sk_buff *cpmac_rx_one(stru
+ 		return NULL;
+ 	}
+ 
+-	skb = netdev_alloc_skb_ip_align(priv->dev, CPMAC_SKB_SIZE);
++	skb = netdev_alloc_skb(priv->dev, CPMAC_SKB_SIZE);
+ 	if (likely(skb)) {
++		offset = 2;
++		if (priv->phy) {
++			offset += priv->phy->pkt_align;
++		}
++		skb_reserve(skb, offset);
++
+ 		skb_put(desc->skb, desc->datalen);
+-		desc->skb->protocol = eth_type_trans(desc->skb, priv->dev);
+ 		skb_checksum_none_assert(desc->skb);
+ 		priv->dev->stats.rx_packets++;
+ 		priv->dev->stats.rx_bytes += desc->datalen;
+@@ -458,7 +464,12 @@ static int cpmac_poll(struct napi_struct
+ 
+ 		skb = cpmac_rx_one(priv, desc);
+ 		if (likely(skb)) {
+-			netif_receive_skb(skb);
++			if (priv->phy->netif_receive_skb) {
++				priv->phy->netif_receive_skb(skb);
++			} else {
++				skb->protocol = eth_type_trans(skb, priv->dev);
++				netif_receive_skb(skb);
++			}
+ 			received++;
+ 		}
+ 		desc = desc->next;
+@@ -951,7 +962,7 @@ static void cpmac_adjust_link(struct net
+ 
+ static int cpmac_open(struct net_device *dev)
+ {
+-	int i, size, res;
++	int i, size, res, offset;
+ 	struct cpmac_priv *priv = netdev_priv(dev);
+ 	struct resource *mem;
+ 	struct cpmac_desc *desc;
+@@ -990,11 +1001,17 @@ static int cpmac_open(struct net_device
+ 
+ 	priv->rx_head = &priv->desc_ring[CPMAC_QUEUES];
+ 	for (i = 0, desc = priv->rx_head; i < priv->ring_size; i++, desc++) {
+-		skb = netdev_alloc_skb_ip_align(dev, CPMAC_SKB_SIZE);
++		skb = netdev_alloc_skb(dev, CPMAC_SKB_SIZE);
+ 		if (unlikely(!skb)) {
+ 			res = -ENOMEM;
+ 			goto fail_desc;
+ 		}
++		offset = 2;
++		if (priv->phy) {
++			offset += priv->phy->pkt_align;
++		}
++		skb_reserve(skb, offset);
++
+ 		desc->skb = skb;
+ 		desc->data_mapping = dma_map_single(&dev->dev, skb->data,
+ 						    CPMAC_SKB_SIZE,