summaryrefslogtreecommitdiff
path: root/target/linux/ar7/patches-4.1
diff options
context:
space:
mode:
authorJonas Gorski <jogo@openwrt.org>2015-07-05 21:32:44 +0000
committerJonas Gorski <jogo@openwrt.org>2015-07-05 21:32:44 +0000
commit7f3182da169223b848d6b4c9a34c3d650de32312 (patch)
tree581c224dfe199a248cb2eab1b0aa83cf8e992755 /target/linux/ar7/patches-4.1
parent62cdc72fb87773188e761e6ebde2c104831b6a64 (diff)
downloadmtk-20170518-7f3182da169223b848d6b4c9a34c3d650de32312.zip
mtk-20170518-7f3182da169223b848d6b4c9a34c3d650de32312.tar.gz
mtk-20170518-7f3182da169223b848d6b4c9a34c3d650de32312.tar.bz2
ar7: add linux 4.1 support
Compile tested only. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46186
Diffstat (limited to 'target/linux/ar7/patches-4.1')
-rw-r--r--target/linux/ar7/patches-4.1/001-mips-ar7-fix-serial.patch23
-rw-r--r--target/linux/ar7/patches-4.1/110-flash.patch22
-rw-r--r--target/linux/ar7/patches-4.1/120-gpio_chrdev.patch28
-rw-r--r--target/linux/ar7/patches-4.1/160-vlynq_try_remote_first.patch300
-rw-r--r--target/linux/ar7/patches-4.1/200-free-mem-below-kernel-offset.patch15
-rw-r--r--target/linux/ar7/patches-4.1/300-add-ac49x-platform.patch85
-rw-r--r--target/linux/ar7/patches-4.1/310-ac49x-prom-support.patch20
-rw-r--r--target/linux/ar7/patches-4.1/320-ac49x-mtd-partitions.patch35
-rw-r--r--target/linux/ar7/patches-4.1/500-serial_kludge.patch28
-rw-r--r--target/linux/ar7/patches-4.1/920-ar7part.patch118
-rw-r--r--target/linux/ar7/patches-4.1/925-actiontec_leds.patch95
-rw-r--r--target/linux/ar7/patches-4.1/950-cpmac_titan.patch52
12 files changed, 821 insertions, 0 deletions
diff --git a/target/linux/ar7/patches-4.1/001-mips-ar7-fix-serial.patch b/target/linux/ar7/patches-4.1/001-mips-ar7-fix-serial.patch
new file mode 100644
index 0000000..1aded92
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/001-mips-ar7-fix-serial.patch
@@ -0,0 +1,23 @@
+From 443ab715a40881d6c9ba11b027ba154bac904cb0 Mon Sep 17 00:00:00 2001
+From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
+Date: Sat, 10 May 2014 23:19:08 +0200
+Subject: [PATCH] MIPS/AR7: ensure that serial ports are properly set up
+
+without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
+never copied, resulting in a dead port.
+
+Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
+---
+ arch/mips/ar7/platform.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/mips/ar7/platform.c
++++ b/arch/mips/ar7/platform.c
+@@ -577,6 +577,7 @@ static int __init ar7_register_uarts(voi
+ uart_port.type = PORT_AR7;
+ uart_port.uartclk = clk_get_rate(bus_clk) / 2;
+ uart_port.iotype = UPIO_MEM32;
++ uart_port.flags = UPF_FIXED_TYPE;
+ uart_port.regshift = 2;
+
+ uart_port.line = 0;
diff --git a/target/linux/ar7/patches-4.1/110-flash.patch b/target/linux/ar7/patches-4.1/110-flash.patch
new file mode 100644
index 0000000..e4aeffd
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/110-flash.patch
@@ -0,0 +1,22 @@
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -12,7 +12,7 @@ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+-obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
++obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
+ obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+--- a/arch/mips/ar7/platform.c
++++ b/arch/mips/ar7/platform.c
+@@ -199,7 +199,7 @@ static struct resource physmap_flash_res
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x10000000,
+- .end = 0x107fffff,
++ .end = 0x11ffffff,
+ };
+
+ static const char *ar7_probe_types[] = { "ar7part", NULL };
diff --git a/target/linux/ar7/patches-4.1/120-gpio_chrdev.patch b/target/linux/ar7/patches-4.1/120-gpio_chrdev.patch
new file mode 100644
index 0000000..1468ca3
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/120-gpio_chrdev.patch
@@ -0,0 +1,28 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -461,6 +461,15 @@ config MWAVE
+ To compile this driver as a module, choose M here: the
+ module will be called mwave.
+
++config AR7_GPIO
++ tristate "TI AR7 GPIO Support"
++ depends on AR7
++ help
++ Give userspace access to the GPIO pins on the Texas Instruments AR7
++ processors.
++
++ If compiled as a module, it will be called ar7_gpio.
++
+ config SCx200_GPIO
+ tristate "NatSemi SCx200 GPIO Support"
+ depends on SCx200
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -42,6 +42,7 @@ obj-$(CONFIG_HW_RANDOM) += hw_random/
+ obj-$(CONFIG_PPDEV) += ppdev.o
+ obj-$(CONFIG_NWBUTTON) += nwbutton.o
+ obj-$(CONFIG_NWFLASH) += nwflash.o
++obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
+ obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
+ obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
diff --git a/target/linux/ar7/patches-4.1/160-vlynq_try_remote_first.patch b/target/linux/ar7/patches-4.1/160-vlynq_try_remote_first.patch
new file mode 100644
index 0000000..1d1310d
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/160-vlynq_try_remote_first.patch
@@ -0,0 +1,300 @@
+--- a/drivers/vlynq/vlynq.c
++++ b/drivers/vlynq/vlynq.c
+@@ -119,20 +119,40 @@ static int vlynq_linked(struct vlynq_dev
+ return 0;
+ }
+
++static volatile int vlynq_delay_value_new = 0;
++
++static void vlynq_delay_wait(u32 count)
++{
++ /* Code adopted from original vlynq driver */
++ int i = 0;
++ volatile int *ptr = &vlynq_delay_value_new;
++ *ptr = 0;
++
++ /* We are assuming that the each cycle takes about
++ * 23 assembly instructions. */
++ for(i = 0; i < (count + 23)/23; i++)
++ *ptr = *ptr + 1;
++}
++
+ static void vlynq_reset(struct vlynq_device *dev)
+ {
++ u32 rtm = readl(&dev->local->revision);
++
++ rtm = rtm < 0x00010205 || readl(&dev->local->status) & 0x800 == 0 ?
++ 0 : 0x600000;
++
+ writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
+ &dev->local->control);
+
+ /* Wait for the devices to finish resetting */
+- msleep(5);
++ vlynq_delay_wait(0xffffff);
+
+ /* Remove reset bit */
+- writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
++ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET | rtm,
+ &dev->local->control);
+
+ /* Give some time for the devices to settle */
+- msleep(5);
++ vlynq_delay_wait(0xffffff);
+ }
+
+ static void vlynq_irq_unmask(struct irq_data *d)
+@@ -379,6 +399,61 @@ void vlynq_unregister_driver(struct vlyn
+ }
+ EXPORT_SYMBOL(vlynq_unregister_driver);
+
++enum vlynq_clk_src {
++ vlynq_clk_external,
++ vlynq_clk_local,
++ vlynq_clk_remote,
++ vlynq_clk_invalid,
++};
++
++static int __vlynq_set_clocks(struct vlynq_device *dev,
++ enum vlynq_clk_src clk_dir,
++ int lclk_div, int rclk_div)
++{
++ u32 reg;
++
++ if (clk_dir == vlynq_clk_invalid) {
++ printk(KERN_ERR "%s: attempt to set invalid clocking\n",
++ dev_name(&dev->dev));
++ return -EINVAL;
++ }
++
++ reg = readl(&dev->local->control);
++ if (readl(&dev->local->revision) < 0x00010205) {
++ if (clk_dir & vlynq_clk_local)
++ reg |= VLYNQ_CTRL_CLOCK_INT;
++ else
++ reg &= ~VLYNQ_CTRL_CLOCK_INT;
++ }
++ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
++ reg |= VLYNQ_CTRL_CLOCK_DIV(lclk_div);
++ writel(reg, &dev->local->control);
++
++ if (!vlynq_linked(dev))
++ return -ENODEV;
++
++ printk(KERN_INFO "%s: local VLYNQ protocol rev. is 0x%08x\n",
++ dev_name(&dev->dev), readl(&dev->local->revision));
++ printk(KERN_INFO "%s: remote VLYNQ protocol rev. is 0x%08x\n",
++ dev_name(&dev->dev), readl(&dev->remote->revision));
++
++ reg = readl(&dev->remote->control);
++ if (readl(&dev->remote->revision) < 0x00010205) {
++ if (clk_dir & vlynq_clk_remote)
++ reg |= VLYNQ_CTRL_CLOCK_INT;
++ else
++ reg &= ~VLYNQ_CTRL_CLOCK_INT;
++ }
++ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
++ reg |= VLYNQ_CTRL_CLOCK_DIV(rclk_div);
++ writel(reg, &dev->remote->control);
++
++ if (!vlynq_linked(dev))
++ return -ENODEV;
++
++ return 0;
++}
++
+ /*
+ * A VLYNQ remote device can clock the VLYNQ bus master
+ * using a dedicated clock line. In that case, both the
+@@ -392,29 +467,16 @@ static int __vlynq_try_remote(struct vly
+ int i;
+
+ vlynq_reset(dev);
+- for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
+- i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
+- dev->dev_id ? i++ : i--) {
++ for (i = 0; i <= 7; i++) {
+
+ if (!vlynq_linked(dev))
+ break;
+
+- writel((readl(&dev->remote->control) &
+- ~VLYNQ_CTRL_CLOCK_MASK) |
+- VLYNQ_CTRL_CLOCK_INT |
+- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
+- &dev->remote->control);
+- writel((readl(&dev->local->control)
+- & ~(VLYNQ_CTRL_CLOCK_INT |
+- VLYNQ_CTRL_CLOCK_MASK)) |
+- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
+- &dev->local->control);
+-
+- if (vlynq_linked(dev)) {
+- printk(KERN_DEBUG
+- "%s: using remote clock divisor %d\n",
+- dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
+- dev->divisor = i;
++ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, i, i)) {
++ printk(KERN_INFO
++ "%s: using remote clock divisor %d\n",
++ dev_name(&dev->dev), i + 1);
++ dev->divisor = i + vlynq_rdiv1;
+ return 0;
+ } else {
+ vlynq_reset(dev);
+@@ -433,25 +495,17 @@ static int __vlynq_try_remote(struct vly
+ */
+ static int __vlynq_try_local(struct vlynq_device *dev)
+ {
+- int i;
++ int i, dir = !dev->dev_id;
+
+ vlynq_reset(dev);
+
+- for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
+- i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
+- dev->dev_id ? i++ : i--) {
+-
+- writel((readl(&dev->local->control) &
+- ~VLYNQ_CTRL_CLOCK_MASK) |
+- VLYNQ_CTRL_CLOCK_INT |
+- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
+- &dev->local->control);
+-
+- if (vlynq_linked(dev)) {
+- printk(KERN_DEBUG
+- "%s: using local clock divisor %d\n",
+- dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
+- dev->divisor = i;
++ for (i = dir ? 7 : 0; dir ? i >= 0 : i <= 7; dir ? i-- : i++) {
++
++ if (!__vlynq_set_clocks(dev, vlynq_clk_local, i, 0)) {
++ printk(KERN_INFO
++ "%s: using local clock divisor %d\n",
++ dev_name(&dev->dev), i + 1);
++ dev->divisor = i + vlynq_ldiv1;
+ return 0;
+ } else {
+ vlynq_reset(dev);
+@@ -473,18 +527,10 @@ static int __vlynq_try_external(struct v
+ if (!vlynq_linked(dev))
+ return -ENODEV;
+
+- writel((readl(&dev->remote->control) &
+- ~VLYNQ_CTRL_CLOCK_INT),
+- &dev->remote->control);
+-
+- writel((readl(&dev->local->control) &
+- ~VLYNQ_CTRL_CLOCK_INT),
+- &dev->local->control);
+-
+- if (vlynq_linked(dev)) {
+- printk(KERN_DEBUG "%s: using external clock\n",
+- dev_name(&dev->dev));
+- dev->divisor = vlynq_div_external;
++ if (!__vlynq_set_clocks(dev, vlynq_clk_external, 0, 0)) {
++ printk(KERN_INFO "%s: using external clock\n",
++ dev_name(&dev->dev));
++ dev->divisor = vlynq_div_external;
+ return 0;
+ }
+
+@@ -501,24 +547,16 @@ static int __vlynq_enable_device(struct
+ return result;
+
+ switch (dev->divisor) {
+- case vlynq_div_external:
+ case vlynq_div_auto:
+ /* When the device is brought from reset it should have clock
+ * generation negotiated by hardware.
+ * Check which device is generating clocks and perform setup
+ * accordingly */
+- if (vlynq_linked(dev) && readl(&dev->remote->control) &
+- VLYNQ_CTRL_CLOCK_INT) {
+- if (!__vlynq_try_remote(dev) ||
+- !__vlynq_try_local(dev) ||
+- !__vlynq_try_external(dev))
+- return 0;
+- } else {
+- if (!__vlynq_try_external(dev) ||
+- !__vlynq_try_local(dev) ||
+- !__vlynq_try_remote(dev))
+- return 0;
+- }
++ if (!__vlynq_try_remote(dev) || !__vlynq_try_local(dev))
++ return 0;
++ case vlynq_div_external:
++ if (!__vlynq_try_external(dev))
++ return 0;
+ break;
+ case vlynq_ldiv1:
+ case vlynq_ldiv2:
+@@ -528,15 +566,12 @@ static int __vlynq_enable_device(struct
+ case vlynq_ldiv6:
+ case vlynq_ldiv7:
+ case vlynq_ldiv8:
+- writel(VLYNQ_CTRL_CLOCK_INT |
+- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+- vlynq_ldiv1), &dev->local->control);
+- writel(0, &dev->remote->control);
+- if (vlynq_linked(dev)) {
+- printk(KERN_DEBUG
+- "%s: using local clock divisor %d\n",
+- dev_name(&dev->dev),
+- dev->divisor - vlynq_ldiv1 + 1);
++ if (!__vlynq_set_clocks(dev, vlynq_clk_local, dev->divisor -
++ vlynq_ldiv1, 0)) {
++ printk(KERN_INFO
++ "%s: using local clock divisor %d\n",
++ dev_name(&dev->dev),
++ dev->divisor - vlynq_ldiv1 + 1);
+ return 0;
+ }
+ break;
+@@ -548,20 +583,17 @@ static int __vlynq_enable_device(struct
+ case vlynq_rdiv6:
+ case vlynq_rdiv7:
+ case vlynq_rdiv8:
+- writel(0, &dev->local->control);
+- writel(VLYNQ_CTRL_CLOCK_INT |
+- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+- vlynq_rdiv1), &dev->remote->control);
+- if (vlynq_linked(dev)) {
+- printk(KERN_DEBUG
+- "%s: using remote clock divisor %d\n",
+- dev_name(&dev->dev),
+- dev->divisor - vlynq_rdiv1 + 1);
++ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, 0,
++ dev->divisor - vlynq_rdiv1)) {
++ printk(KERN_INFO
++ "%s: using remote clock divisor %d\n",
++ dev_name(&dev->dev),
++ dev->divisor - vlynq_rdiv1 + 1);
+ return 0;
+ }
+ break;
+ }
+-
++ vlynq_reset(dev);
+ ops->off(dev);
+ return -ENODEV;
+ }
+@@ -732,14 +764,14 @@ static int vlynq_probe(struct platform_d
+ platform_set_drvdata(pdev, dev);
+
+ printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
+- dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
+- (void *)dev->mem_start);
++ dev_name(&dev->dev), (void *)dev->regs_start,
++ dev->irq, (void *)dev->mem_start);
+
+ dev->dev_id = 0;
+ dev->divisor = vlynq_div_auto;
+- result = __vlynq_enable_device(dev);
+- if (result == 0) {
++ if (!__vlynq_enable_device(dev)) {
+ dev->dev_id = readl(&dev->remote->chip);
++ vlynq_reset(dev);
+ ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
+ }
+ if (dev->dev_id)
diff --git a/target/linux/ar7/patches-4.1/200-free-mem-below-kernel-offset.patch b/target/linux/ar7/patches-4.1/200-free-mem-below-kernel-offset.patch
new file mode 100644
index 0000000..4011942
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/200-free-mem-below-kernel-offset.patch
@@ -0,0 +1,15 @@
+--- a/arch/mips/ar7/memory.c
++++ b/arch/mips/ar7/memory.c
+@@ -66,5 +66,11 @@ void __init prom_meminit(void)
+
+ void __init prom_free_prom_memory(void)
+ {
+- /* Nothing to free */
++ /* adapted from arch/mips/txx9/generic/setup.c */
++ unsigned long saddr = PHYS_OFFSET + PAGE_SIZE;
++ unsigned long eaddr = __pa_symbol(&_text);
++
++ /* free memory between prom-record and kernel _text base */
++ if (saddr < eaddr)
++ free_init_pages("prom memory", saddr, eaddr);
+ }
diff --git a/target/linux/ar7/patches-4.1/300-add-ac49x-platform.patch b/target/linux/ar7/patches-4.1/300-add-ac49x-platform.patch
new file mode 100644
index 0000000..2e5528e
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/300-add-ac49x-platform.patch
@@ -0,0 +1,85 @@
+--- a/arch/mips/ar7/Platform
++++ b/arch/mips/ar7/Platform
+@@ -3,4 +3,9 @@
+ #
+ platform-$(CONFIG_AR7) += ar7/
+ cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7
+-load-$(CONFIG_AR7) += 0xffffffff94100000
++load-$(CONFIG_AR7_TI) += 0xffffffff94100000
++
++#
++# AudioCodes AC49x
++#
++load-$(CONFIG_AR7_AC49X) += 0xffffffff945ca000
+--- a/arch/mips/ar7/setup.c
++++ b/arch/mips/ar7/setup.c
+@@ -69,6 +69,10 @@ const char *get_system_type(void)
+ return "TI AR7 (TNETV1056)";
+ case TITAN_CHIP_1060:
+ return "TI AR7 (TNETV1060)";
++ case TITAN_CHIP_AC495:
++ return "AudioCodes AC495";
++ case TITAN_CHIP_AC496:
++ return "AudioCodes AC496";
+ }
+ default:
+ return "TI AR7 (unknown)";
+--- a/arch/mips/include/asm/mach-ar7/ar7.h
++++ b/arch/mips/include/asm/mach-ar7/ar7.h
+@@ -92,6 +92,8 @@
+ #define TITAN_CHIP_1055 0x0e
+ #define TITAN_CHIP_1056 0x0d
+ #define TITAN_CHIP_1060 0x07
++#define TITAN_CHIP_AC495 0x00
++#define TITAN_CHIP_AC496 0x02
+
+ /* Interrupts */
+ #define AR7_IRQ_UART0 15
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -99,7 +99,7 @@ config AR7
+ select HAVE_CLK
+ help
+ Support for the Texas Instruments AR7 System-on-a-Chip
+- family: TNETD7100, 7200 and 7300.
++ family: TI TNETD7100, 7200, 7300 and AudioCodes AC49x.
+
+ config ATH25
+ bool "Atheros AR231x/AR531x SoC support"
+@@ -925,6 +925,7 @@ config MIPS_PARAVIRT
+ endchoice
+
+ source "arch/mips/alchemy/Kconfig"
++source "arch/mips/ar7/Kconfig"
+ source "arch/mips/ath25/Kconfig"
+ source "arch/mips/ath79/Kconfig"
+ source "arch/mips/bcm47xx/Kconfig"
+--- /dev/null
++++ b/arch/mips/ar7/Kconfig
+@@ -0,0 +1,26 @@
++if AR7
++
++config AR7_TI
++ bool
++
++config AR7_AC49X
++ bool
++
++choice
++ prompt "AR7 SoC family selection"
++ default AR7_TYPE_TI
++ depends on AR7
++ help
++ Select AR7 MIPS SoC implementation.
++
++ config AR7_TYPE_TI
++ bool "Texas Instruments AR7"
++ select AR7_TI
++
++ config AR7_TYPE_AC49X
++ bool "AudioCodes AC49X"
++ select AR7_AC49X
++
++endchoice
++
++endif
diff --git a/target/linux/ar7/patches-4.1/310-ac49x-prom-support.patch b/target/linux/ar7/patches-4.1/310-ac49x-prom-support.patch
new file mode 100644
index 0000000..dddf221
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/310-ac49x-prom-support.patch
@@ -0,0 +1,20 @@
+--- a/arch/mips/ar7/prom.c
++++ b/arch/mips/ar7/prom.c
+@@ -70,6 +70,7 @@ struct psbl_rec {
+ };
+
+ static const char psp_env_version[] __initconst = "TIENV0.8";
++static const char psp_env_version_ac49x[] __initconst = "MaxENV0.2";
+
+ struct psp_env_chunk {
+ u8 num;
+@@ -186,7 +187,8 @@ static void __init ar7_init_env(struct e
+ struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
+ void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
+
+- if (strcmp(psp_env, psp_env_version) == 0) {
++ if (strcmp(psp_env, psp_env_version) == 0 ||
++ strcmp(psp_env, psp_env_version_ac49x) == 0) {
+ parse_psp_env(psp_env);
+ } else {
+ for (i = 0; i < MAX_ENTRY; i++, env++)
diff --git a/target/linux/ar7/patches-4.1/320-ac49x-mtd-partitions.patch b/target/linux/ar7/patches-4.1/320-ac49x-mtd-partitions.patch
new file mode 100644
index 0000000..475104e
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/320-ac49x-mtd-partitions.patch
@@ -0,0 +1,35 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -164,6 +164,11 @@ config MTD_OF_PARTS
+ the partition map from the children of the flash node,
+ as described in Documentation/devicetree/bindings/mtd/partition.txt.
+
++config MTD_AC49X_PARTS
++ tristate "AudioCodes AC49X partitioning support"
++ ---help---
++ AudioCodes AC49X partitioning support
++
+ config MTD_AR7_PARTS
+ tristate "TI AR7 partitioning support"
+ ---help---
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_SPLIT) += mtdsplit/
+ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
++obj-$(CONFIG_MTD_AC49X_PARTS) += ac49xpart.o
+ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
+--- a/arch/mips/ar7/platform.c
++++ b/arch/mips/ar7/platform.c
+@@ -202,7 +202,7 @@ static struct resource physmap_flash_res
+ .end = 0x11ffffff,
+ };
+
+-static const char *ar7_probe_types[] = { "ar7part", NULL };
++static const char *ar7_probe_types[] = { "ac49xpart", "ar7part", NULL };
+
+ static struct physmap_flash_data physmap_flash_data = {
+ .width = 2,
diff --git a/target/linux/ar7/patches-4.1/500-serial_kludge.patch b/target/linux/ar7/patches-4.1/500-serial_kludge.patch
new file mode 100644
index 0000000..4baf4aa
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/500-serial_kludge.patch
@@ -0,0 +1,28 @@
+--- a/drivers/tty/serial/8250/8250_core.c
++++ b/drivers/tty/serial/8250/8250_core.c
+@@ -339,6 +339,13 @@ configured less than Maximum supported f
+ UART_FCR7_64BYTE,
+ .flags = UART_CAP_FIFO,
+ },
++ [PORT_AR7] = {
++ .name = "TI-AR7",
++ .fifo_size = 16,
++ .tx_loadsz = 16,
++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
++ .flags = UART_CAP_FIFO | UART_CAP_AFE,
++ },
+ };
+
+ /* Uart divisor latch read */
+@@ -3340,7 +3347,11 @@ static void serial8250_console_putchar(s
+ {
+ struct uart_8250_port *up = up_to_u8250p(port);
+
++#ifdef CONFIG_AR7
++ wait_for_xmitr(up, BOTH_EMPTY);
++#else
+ wait_for_xmitr(up, UART_LSR_THRE);
++#endif
+ serial_port_out(port, UART_TX, ch);
+ }
+
diff --git a/target/linux/ar7/patches-4.1/920-ar7part.patch b/target/linux/ar7/patches-4.1/920-ar7part.patch
new file mode 100644
index 0000000..9948858
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/920-ar7part.patch
@@ -0,0 +1,118 @@
+--- a/drivers/mtd/ar7part.c
++++ b/drivers/mtd/ar7part.c
+@@ -30,11 +30,14 @@
+
+ #include <uapi/linux/magic.h>
+
++#include <asm/mach-ar7/prom.h>
++
+ #define AR7_PARTS 4
+ #define ROOT_OFFSET 0xe0000
+
+ #define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42)
+ #define LOADER_MAGIC2 le32_to_cpu(0xfeed1281)
++#define LOADER_MAGIC3 le32_to_cpu(0x434d4d4c)
+
+ struct ar7_bin_rec {
+ unsigned int checksum;
+@@ -42,12 +45,16 @@ struct ar7_bin_rec {
+ unsigned int address;
+ };
+
++int create_titan_partitions(struct mtd_info *master,
++ struct mtd_partition **pparts,
++ struct mtd_part_parser_data *data);
++
+ static int create_mtd_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+ {
+ struct ar7_bin_rec header;
+- unsigned int offset;
++ unsigned int offset, mtd_start, mtd_end;
+ size_t len;
+ unsigned int pre_size = master->erasesize, post_size = 0;
+ unsigned int root_offset = ROOT_OFFSET;
+@@ -55,6 +62,16 @@ static int create_mtd_partitions(struct
+ int retries = 10;
+ struct mtd_partition *ar7_parts;
+
++ const char *prom_str = prom_getenv("ProductID");
++ char mtd_name[] = "mtd1";
++ if(prom_str &&
++ (strcmp(prom_str, "CYWL")==0 ||
++ strcmp(prom_str, "CYWM")==0 ||
++ strcmp(prom_str, "CYLM")==0 ||
++ strcmp(prom_str, "CYLL")==0)){
++ return create_titan_partitions(master, pparts, data);
++ }
++
+ ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL);
+ if (!ar7_parts)
+ return -ENOMEM;
+@@ -83,34 +100,39 @@ static int create_mtd_partitions(struct
+
+ pre_size = offset;
+
+- if (!ar7_parts[1].offset) {
+- ar7_parts[1].offset = master->size - master->erasesize;
+- post_size = master->erasesize;
+- }
+-
+ switch (header.checksum) {
+- case LOADER_MAGIC1:
+- while (header.length) {
+- offset += sizeof(header) + header.length;
+- mtd_read(master, offset, sizeof(header), &len,
+- (uint8_t *)&header);
+- }
+- root_offset = offset + sizeof(header) + 4;
+- break;
+ case LOADER_MAGIC2:
++ for (retries = 0; retries <= 9; retries++) {
++ mtd_name[3] = '0' + retries;
++ prom_str = prom_getenv(mtd_name);
++ if (prom_str == NULL)
++ continue;
++ sscanf(prom_str, "%i,%i", &mtd_start, &mtd_end);
++ if (pre_size == (mtd_start & 0x1ffffff)) {
++ ar7_parts[1].offset = mtd_end &= 0x1ffffff;
++ ar7_parts[1].size = post_size = master->size - mtd_end;
++ break;
++ }
++ }
++ case LOADER_MAGIC1:
++ root_offset = (header.checksum == LOADER_MAGIC1) ? 4 : 0;
+ while (header.length) {
+ offset += sizeof(header) + header.length;
+ mtd_read(master, offset, sizeof(header), &len,
+ (uint8_t *)&header);
+ }
+- root_offset = offset + sizeof(header) + 4 + 0xff;
+- root_offset &= ~(uint32_t)0xff;
++ root_offset += offset + sizeof(header);
+ break;
+ default:
+ printk(KERN_WARNING "Unknown magic: %08x\n", header.checksum);
+ break;
+ }
+
++ if (!ar7_parts[1].offset) {
++ post_size = master->erasesize;
++ ar7_parts[1].offset = master->size - post_size;
++ }
++
+ mtd_read(master, root_offset, sizeof(header), &len, (u8 *)&header);
+ if (header.checksum != SQUASHFS_MAGIC) {
+ root_offset += master->erasesize - 1;
+--- a/drivers/mtd/titanpart.c
++++ b/drivers/mtd/titanpart.c
+@@ -149,7 +149,7 @@ static void titan_add_partition(char * e
+ }
+ int create_titan_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+- unsigned long origin)
++ struct mtd_part_parser_data *data)
+ {
+ struct nsp_img_hdr_head hdr;
+ struct nsp_img_hdr_section_info sect_info;
diff --git a/target/linux/ar7/patches-4.1/925-actiontec_leds.patch b/target/linux/ar7/patches-4.1/925-actiontec_leds.patch
new file mode 100644
index 0000000..1346a21
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/925-actiontec_leds.patch
@@ -0,0 +1,95 @@
+--- a/arch/mips/ar7/platform.c
++++ b/arch/mips/ar7/platform.c
+@@ -461,31 +461,22 @@ static struct gpio_led fb_fon_leds[] = {
+ },
+ };
+
+-static struct gpio_led gt701_leds[] = {
++static struct gpio_led actiontec_leds[] = {
+ {
+ .name = "inet:green",
+ .gpio = 13,
+- .active_low = 1,
+- },
+- {
+- .name = "usb",
+- .gpio = 12,
+- .active_low = 1,
+ },
+ {
+ .name = "inet:red",
+ .gpio = 9,
+- .active_low = 1,
+ },
+ {
+- .name = "power:red",
++ .name = "power:green",
+ .gpio = 7,
+- .active_low = 1,
+ },
+ {
+- .name = "power:green",
++ .name = "power:red",
+ .gpio = 8,
+- .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+@@ -493,6 +484,44 @@ static struct gpio_led gt701_leds[] = {
+ .gpio = 10,
+ .active_low = 1,
+ },
++ {
++ .name = "wifi",
++ .gpio = 6,
++ .active_low = 1,
++ },
++ {
++ .name = "wifi:red",
++ .gpio = 3,
++ },
++ {
++ .name = "standby",
++ .gpio = 4,
++ },
++ {
++ .name = "wps",
++ .gpio = 16,
++ .active_low = 1,
++ },
++ {
++ .name = "usb",
++ .gpio = 12,
++ .active_low = 1,
++ },
++ {
++ .name = "voip",
++ .gpio = 15,
++ .active_low = 1,
++ },
++ {
++ .name = "line1",
++ .gpio = 23,
++ .active_low = 1,
++ },
++ {
++ .name = "line2",
++ .gpio = 25,
++ .active_low = 1,
++ },
+ };
+
+ static struct gpio_led_platform_data ar7_led_data;
+@@ -536,9 +565,9 @@ static void __init detect_leds(void)
+ } else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
+ ar7_led_data.leds = titan_leds;
+- } else if (strstr(prid, "GT701")) {
+- ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
+- ar7_led_data.leds = gt701_leds;
++ } else if (strstr(prid, "GT7") || strstr(prid, "PK5000")) {
++ ar7_led_data.num_leds = ARRAY_SIZE(actiontec_leds);
++ ar7_led_data.leds = actiontec_leds;
+ }
+ }
+
diff --git a/target/linux/ar7/patches-4.1/950-cpmac_titan.patch b/target/linux/ar7/patches-4.1/950-cpmac_titan.patch
new file mode 100644
index 0000000..f1d432c
--- /dev/null
+++ b/target/linux/ar7/patches-4.1/950-cpmac_titan.patch
@@ -0,0 +1,52 @@
+--- a/drivers/net/ethernet/ti/cpmac.c
++++ b/drivers/net/ethernet/ti/cpmac.c
+@@ -1146,6 +1146,8 @@ static int cpmac_probe(struct platform_d
+ goto out;
+ }
+
++ ar7_device_reset(pdata->reset_bit);
++
+ dev->irq = platform_get_irq_byname(pdev, "irq");
+
+ dev->netdev_ops = &cpmac_netdev_ops;
+@@ -1227,7 +1229,7 @@ int cpmac_init(void)
+ cpmac_mii->reset = cpmac_mdio_reset;
+ cpmac_mii->irq = mii_irqs;
+
+- cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256);
++ cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256);
+
+ if (!cpmac_mii->priv) {
+ pr_err("Can't ioremap mdio registers\n");
+@@ -1238,10 +1240,16 @@ int cpmac_init(void)
+ #warning FIXME: unhardcode gpio&reset bits
+ ar7_gpio_disable(26);
+ ar7_gpio_disable(27);
+- ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
+- ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
++
++ if (!ar7_is_titan()) {
++ ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
++ ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
++ }
+ ar7_device_reset(AR7_RESET_BIT_EPHY);
+
++ if (ar7_is_titan())
++ ar7_device_reset(TITAN_RESET_BIT_EPHY1);
++
+ cpmac_mii->reset(cpmac_mii);
+
+ for (i = 0; i < 300; i++) {
+@@ -1258,7 +1266,11 @@ int cpmac_init(void)
+ mask = 0;
+ }
+
+- cpmac_mii->phy_mask = ~(mask | 0x80000000);
++ if (ar7_is_titan())
++ cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000);
++ else
++ cpmac_mii->phy_mask = ~(mask | 0x80000000);
++
+ snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "cpmac-1");
+
+ res = mdiobus_register(cpmac_mii);