diff options
author | Piotr Dymacz <pepe2k@gmail.com> | 2018-01-23 21:37:16 +0100 |
---|---|---|
committer | Piotr Dymacz <pepe2k@gmail.com> | 2018-02-22 18:53:22 +0100 |
commit | 650a5e993b3b252da511e90706f3759d5ea68ce1 (patch) | |
tree | d154341bc8d38334e2e3d9b9cf98d2cb84a7022d /target/linux/ar71xx/base-files/etc/board.d | |
parent | 29d7c29046dba69f92bce528c8dc9d2579862b4c (diff) | |
download | mtk-20170518-650a5e993b3b252da511e90706f3759d5ea68ce1.zip mtk-20170518-650a5e993b3b252da511e90706f3759d5ea68ce1.tar.gz mtk-20170518-650a5e993b3b252da511e90706f3759d5ea68ce1.tar.bz2 |
ar71xx: add support for COMFAST CF-E385AC
COMFAST CF-E385AC is an AC2200 ceiling mount AP with PoE support, based
on Qualcomm/Atheros QCA9558 + QCA9984 + QCA8337N.
Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 256 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100/1000 Mbps Ethernet, with PoE support
- 3T3R 2.4 GHz (QCA9558), with external LNA and PA (SE2576L)
- 4T4R 5 GHz (QCA9984), with external FEM (SKY85728-11)
- 7x internal antennas
- 1x RGB LED (driven by GPIO)
- 1x button (reset)
- UART, LEDs/GPIO and USB headers on PCB
- external watchdog (Pericon Technology PT7A7514)
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc/board.d')
-rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/01_leds | 13 | ||||
-rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/02_network | 5 |
2 files changed, 16 insertions, 2 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 85f104a..1b308d7 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -218,10 +218,19 @@ cf-e375ac) cf-e355ac-v1|\ cf-e355ac-v2|\ cf-e380ac-v1|\ -cf-e380ac-v2) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" +cf-e380ac-v2|\ +cf-e385ac) ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:red:wlan5g" "phy0tpt" + + case "$board" in + cf-e385ac) + ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x04" + ;; + *) + ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" + ;; + esac ;; cf-e520n|\ cf-e530n) diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 0fe71e0..434056a 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -266,6 +266,11 @@ ar71xx_setup_interfaces() rme-eg200) ucidef_set_interface_lan "eth0" "dhcp" ;; + cf-e385ac) + ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan" "1:wan" "6@eth1" + ;; cpe210|\ cpe510|\ wbs210|\ |