diff options
| author | Piotr Dymacz <pepe2k@gmail.com> | 2017-03-31 13:37:31 +0200 |
|---|---|---|
| committer | Piotr Dymacz <pepe2k@gmail.com> | 2017-07-22 23:13:55 +0200 |
| commit | 0c6165d21ad274261bf8176828e122964e25c215 (patch) | |
| tree | 0866801d72bc2c8d1b1b40a90a60870071cae56c /target/linux/ar71xx/base-files/etc/board.d | |
| parent | 5bc5d94549d51a4579bd956f9495c6be0d5a712f (diff) | |
| download | mtk-20170518-0c6165d21ad274261bf8176828e122964e25c215.zip mtk-20170518-0c6165d21ad274261bf8176828e122964e25c215.tar.gz mtk-20170518-0c6165d21ad274261bf8176828e122964e25c215.tar.bz2 | |
ar71xx: add support for ALFA Network AP121F
ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users.
Device is based on Atheros AR9331 WiSoC and is running a custom version
(updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware.
Specification:
- 400/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR1)
- 16 MB of FLASH (SPI NOR)
- 1x 10/100 Mbps Ethernet
- 1T1R 2.4 GHz
- 1x microSD (optional, on separate PCB)
- 3x LED, 1x button, 1x switch
- UART header on PCB
Flash instruction (under U-Boot web recovery mode):
1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with RJ45 port, press the reset button, power up device,
wait for first blink of all LEDs (indicates network setup), then keep
button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc/board.d')
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 | ||||
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/02_network | 1 |
2 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 8eaa892..84b1a7d 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -48,6 +48,10 @@ antrouter-r1) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0" ;; +ap121f) + ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" + ;; ap531b0|\ sc1750|\ sc450) diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index b2126c0..5889b2b 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -63,6 +63,7 @@ ar71xx_setup_interfaces() antminer-s1|\ antminer-s3|\ antrouter-r1|\ + ap121f|\ aw-nr580|\ bullet-m|\ c-55|\ |