summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/base-files/etc/diag.sh
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2016-10-08 01:17:04 +0200
committerJohn Crispin <john@phrozen.org>2016-11-21 10:05:40 +0100
commiteb9ba2b91e0f0c2d0b072b3fea3ea2a8b50af5fc (patch)
tree9b881025fb7f4d892f7959a1a080ca16f7565c84 /target/linux/ar71xx/base-files/etc/diag.sh
parent9ee8257cc7ed45cde07558a3b9e5310d16ad078d (diff)
downloadmtk-20170518-eb9ba2b91e0f0c2d0b072b3fea3ea2a8b50af5fc.zip
mtk-20170518-eb9ba2b91e0f0c2d0b072b3fea3ea2a8b50af5fc.tar.gz
mtk-20170518-eb9ba2b91e0f0c2d0b072b3fea3ea2a8b50af5fc.tar.bz2
ar71xx: add support for YunCore CPE870
YunCore CPE870 is an outdoor CPE/AP based on Atheros AR9341. Short specification: - 535/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, passive PoE support - 64/128 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SKY65174-21), up to 30 dBm - internal 14 dBi panel antenna - 8x LED, 1x button - UART (JP1) header on PCB Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-cpe870-squashfs-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. setenv bootcmd "bootm 0x9f020000" 5. saveenv && reset Vendor firmware access (login/password): Admin/5up Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc/diag.sh')
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 0ef5a52..e619749 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -48,6 +48,7 @@ get_status_led() {
status_led="$board:green:power"
;;
ap90q|\
+ cpe870|\
gl-inet)
status_led="$board:green:lan"
;;