summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/base-files/etc/hotplug.d
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2017-07-02 18:32:38 +0200
committerPiotr Dymacz <pepe2k@gmail.com>2017-07-04 08:58:54 +0200
commit6165e4aab0e22b780b6b1dde887ed803a7c8210a (patch)
tree4f95e80fcccc02122231d83e6f1579f8a97490af /target/linux/ar71xx/base-files/etc/hotplug.d
parent0a2e4204dbe0b7bf31cb4100491a01b2837d7f3f (diff)
downloadmtk-20170518-6165e4aab0e22b780b6b1dde887ed803a7c8210a.zip
mtk-20170518-6165e4aab0e22b780b6b1dde887ed803a7c8210a.tar.gz
mtk-20170518-6165e4aab0e22b780b6b1dde887ed803a7c8210a.tar.bz2
ar71xx: add support for TP-Link TL-WR902AC v1
TP-Link TL-WR902AC v1 is a pocket-size, dual-band (AC750), successor of TL-MR3020 (both devices use very similar enclosure, in same size). New device is based on Qualcomm QCA9531 v2 + QCA9887. FCC ID: TE7WR902AC. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 1x USB 2.0 (GPIO-controlled power) - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) - 5x LED (GPIO-controlled), 2x button, 1x 3-pos switch - UART pads on PCB (TP1 -> TX, TP2 -> RX, TP3 -> GND, TP4 -> 3V3, jumper resitors are missing on TX/RX lines) - 1x micro USB (for power only) Flash instructions: Use "factory" image under vendor GUI. Recovery instructions: This device contains tftp recovery mode inside U-Boot. You can use it to flash LEDE (use "factory" image) or vendor firmware. 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "lede-ar71xx-generic-tl-wr902ac-v1-squashfs-factory.bin" to "wr902acv1_un_tp_recovery.bin" and place it in tftp server dir. 3. Connect PC with LAN port, press the reset button, power up the router and keep button pressed until WPS LED lights up. 4. Router will download file from server, write it to flash and reboot. Root access over serial line in vendor firmware: root/sohoadmin. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/base-files/etc/hotplug.d')
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata3
1 files changed, 2 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index ecbc9b8..a2e98f4 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -98,7 +98,8 @@ case "$FIRMWARE" in
rb-952ui-5ac2nd)
ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116
;;
- re450)
+ re450|\
+ tl-wr902ac-v1)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;