ar71xx: add support for the Airtight C-60

This patch adds support for the Airtight C-60.

SOC:	Atheros AR9344 rev 2 (CPU:560.000MHz)
RAM:	128 MiB
NOR:	MX25L3205D 4MiB
NAND:	ST Micro NAND 32MiB 3,3V 8-bit
SW-NET:	AR8327N (2 Ports)
WLAN1:	Dual-Band AR9340 Rev:2 (built-in SoC)
WLAN2:	Dual-Band AR9300 Rev:4 PCIe Chip

The switch is setup for an accesspoint:
	LAN1: (gigabit) is the wan-port.
	LAN2: (fast ethernet) is bridged with the br-lan.

Flashing Guide (via initramfs):
  1. Connect a PC to the serial port of the C-60.
     power up the C-60.

     Enter u-boot command prompt:
     #> nand erase
     #> setenv bootcmd "bootm 0x9f060000"
     #> saveenv
     #> setenv ipaddr 192.168.1.1
     #> setenv netmask 255.255.255.0
     #> setenv serverip 192.168.1.100
     #> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin
     #> tftpboot
     #> bootm

  2. Wait for the C-60 to boot LEDE.
     On the root prompt. Enter:
     # ubiformat /dev/mtd4
     # ubiattach -p /dev/mtd4

  3. After that copy the sysupgrade.tar onto the router and run:
     # sysupgrade sysupgrade.tar

     to flash the image.

Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided
a C-60 unit and he helped with debugging the switch, LEDs and platfrom
support.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

7 files changed, 30 insertions, 14 deletions

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 308a050..5011af6 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -92,6 +92,10 @@ c-55)
 	ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "$board:amber:wlan" "phy0tpt"
 	ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "$board:green:wlan" "phy1tpt"
 	;;
+c-60)
+	ucidef_set_led_wlan "wlan1_green" "WLAN1_GREEN" "$board:green:wlan1" "phy0tpt"
+	ucidef_set_led_wlan "wlan2_green" "WLAN2_GREEN" "$board:green:wlan2" "phy1tpt"
+	;;
 cap4200ag)
 	ucidef_set_led_default "lan_green" "LAN_GREEN" "senao:green:lan" "1"
 	ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "senao:amber:wlan" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 4ef43cf..f720767 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -199,6 +199,10 @@ ar71xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth1" "1:lan" "3:lan"
 		;;
+	c-60)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "3:wan" "4:lan"
+		;;
 	cap324)
 		ucidef_set_interface_lan "eth0" "dhcp"
 		;;
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index d5ddb51..0d069ec 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -73,7 +73,8 @@ get_status_led() {
 	cap324)
 		status_led="pcs:green:power"
 		;;
-	c-55)
+	c-55|\
+	c-60)
 		status_led="$board:green:pwr"
 		;;
 	cap4200ag)
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 3141625..945167b 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -53,7 +53,8 @@ board=$(ar71xx_board_name)
 case "$FIRMWARE" in
 "soc_wmac.eeprom")
 	case $board in
-	c-55)
+	c-55|\
+	c-60)
 		ath9k_eeprom_extract "art" 4096 2048
 		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0) +1)
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index a8ea7d4..940c1c9 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -482,6 +482,9 @@ ar71xx_board_detect() {
 	*C-55)
 		name="c-55"
 		;;
+	*C-60)
+		name="c-60"
+		;;
 	*CAP4200AG)
 		name="cap4200ag"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
index 60e2787..50f59de 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
@@ -22,7 +22,8 @@ fetch_mac_from_mtd() {
 
 preinit_set_mac_address() {
 	case $(ar71xx_board_name) in
-		c-55)
+		c-55|\
+		c-60)
 			mac_lan=$(mtd_get_mac_binary art 0)
 			[ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
 			;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 010442c..7c554e3 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -424,6 +424,14 @@ platform_check_image() {
 	tew-673gru)
 		dir825b_check_image "$1" && return 0
 		;;
+	c-60|\
+	nbg6716|\
+	r6100|\
+	wndr3700v4|\
+	wndr4300)
+		nand_do_platform_check $board $1
+		return $?
+		;;
 	cpe210|\
 	cpe510)
 		tplink_pharos_check_image "$1" && return 0
@@ -485,13 +493,6 @@ platform_check_image() {
 
 		return 0
 		;;
-	nbg6716|\
-	r6100|\
-	wndr3700v4|\
-	wndr4300)
-		nand_do_platform_check $board $1
-		return $?
-		;;
 	tube2h)
 		alfa_check_image "$1" && return 0
 		return 1
@@ -537,16 +538,17 @@ platform_pre_upgrade() {
 	local board=$(ar71xx_board_name)
 
 	case "$board" in
-	mr18|\
-	z1)
-		merakinand_do_upgrade "$1"
-		;;
+	c-60|\
 	nbg6716|\
 	r6100|\
 	wndr3700v4|\
 	wndr4300)
 		nand_do_upgrade "$1"
 		;;
+	mr18|\
+	z1)
+		merakinand_do_upgrade "$1"
+		;;
 	esac
 }