ar71xx: add support for YunCore AP90Q

YunCore AP90Q is an outdoor CPE/AP based on Qualcomm/Atheros QCA9531 v2.
Short specification:

- 650/600/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, passive PoE support
- 64/128 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz with external PA, up to 29 dBm
- 2x internal 5 dBi omni antennas
- 4x LED, 1x button
- UART (JP1) header on PCB

Flash instruction under U-Boot, using UART:

1. tftp 0x80060000 lede-ar71xx-generic-ap90q-squashfs-sysupgrade
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset

Flash instruction under vendor fimrware, using telnet/SSH:

1. Connect PC with 192.168.1.x address to WAN port
2. Power up device, enter failsafe mode with button (no LED indicator!)
3. Change root password and reboot (mount_root, passwd ..., reboot -f)
4. Upload lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin to /tmp using SCP
5. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253
6. Invoke:
- cd /tmp
- fw_setenv bootcmd "bootm 0x9f050000"
- mtd erase firmware
- mtd -r write lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin firmware

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

4 files changed, 19 insertions, 7 deletions

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 29ee5d7..c348b4f 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -57,6 +57,17 @@ ap147-010)
 	ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
 	ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
 	;;
+ap90q|\
+dr531)
+	ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+	ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
+
+	case "$board" in
+	ap90q)
+		ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+		;;
+	esac
+	;;
 bhr-4grv2)
 	ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
 	ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
@@ -152,10 +163,6 @@ cr5000)
 	ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt"
 	ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
 	;;
-dr531)
-	ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
-	ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
-	;;
 dragino2)
 	ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
 	ucidef_set_led_netdev "lan" "LAN" "$board:red:lan" "eth0"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index bb42843..0ef5a52 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -47,6 +47,10 @@ get_status_led() {
 	tl-wpa8630)
 		status_led="$board:green:power"
 		;;
+	ap90q|\
+	gl-inet)
+		status_led="$board:green:lan"
+		;;
 	ap96)
 		status_led="$board:green:led2"
 		;;
@@ -168,9 +172,6 @@ get_status_led() {
 	f9k1115v2)
 		status_led="belkin:blue:status"
 		;;
-	gl-inet)
-		status_led="$board:green:lan"
-		;;
 	epg5000|\
 	esr1750)
 		status_led="$board:amber:power"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 8f710e6..16ee2eb 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -470,6 +470,9 @@ ar71xx_board_detect() {
 	*AP83)
 		name="ap83"
 		;;
+	*AP90Q)
+		name="ap90q"
+		;;
 	*"Archer C5")
 		name="archer-c5"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 87c9d8f..697b786 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -178,6 +178,7 @@ platform_check_image() {
 	ap132|\
 	ap81|\
 	ap83|\
+	ap90q|\
 	bullet-m|\
 	c-55|\
 	carambola2|\