diff options
| author | Piotr Dymacz <pepe2k@gmail.com> | 2018-01-05 11:35:45 +0100 |
|---|---|---|
| committer | Piotr Dymacz <pepe2k@gmail.com> | 2018-01-14 21:30:16 +0100 |
| commit | 4b0eebe9dfa49f995474322f2c6998026534a5f8 (patch) | |
| tree | 22e8ca9428a42da7aa590188145c3d408f749fc4 /target/linux/ar71xx/config-4.9 | |
| parent | 62610129b23db2ff995191940b88a6e56d0a87d6 (diff) | |
| download | mtk-20170518-4b0eebe9dfa49f995474322f2c6998026534a5f8.zip mtk-20170518-4b0eebe9dfa49f995474322f2c6998026534a5f8.tar.gz mtk-20170518-4b0eebe9dfa49f995474322f2c6998026534a5f8.tar.bz2 | |
ar71xx: add support for ALFA Network N5Q
ALFA Network N5Q is a successor of previous model, the N5 (outdoor
CPE/AP, based on Atheros AR7240 + AR9280). New version is based on
Atheros AR9344.
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 2T2R 5 GHz (AR9344), with ext. PA (RFPA5542) and LNA, up to 27 dBm
- 8x LED (7 are driven by GPIO)
- 1x button (reset)
- external h/w watchdog (EM6324QYSP5B, disabled and not used)
- header for optional 802.3at/af PoE module
- DC jack for main power input (optional, not installed by default)
- UART header on PCB
Flash instruction:
You can use sysupgrade image directly in vendor firmare which is based
on OpenWrt/LEDE. Alternatively, you can use web recovery mode in U-Boot:
1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
device, wait for first blink of all LEDs (indicates network setup),
then keep button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/config-4.9')
| -rw-r--r-- | target/linux/ar71xx/config-4.9 | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index 401c41e..8815edf 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -137,6 +137,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_MYNET_REXT is not set # CONFIG_ATH79_MACH_MZK_W04NU is not set # CONFIG_ATH79_MACH_MZK_W300NH is not set +# CONFIG_ATH79_MACH_N5Q is not set # CONFIG_ATH79_MACH_NBG460N is not set # CONFIG_ATH79_MACH_NBG6716 is not set # CONFIG_ATH79_MACH_OM2P is not set |