ar71xx: remove AP113 reference design board support

Due to flash size limitations, support for this board has not been
functional for years

Signed-off-by: Felix Fietkau <nbd@nbd.name>

4 files changed, 0 insertions, 96 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index a0f24e1..4d82db2 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -103,16 +103,6 @@ config ATH79_MACH_ARDUINO_YUN
 	  Say 'Y' here if you want your kernel to support the
 	  Arduino Yun.
 
-config ATH79_MACH_AP113
-	bool "Atheros AP113 board support"
-	select SOC_AR724X
-	select ATH79_DEV_M25P80
-	select ATH79_DEV_PB9X_PCI if PCI
-	select ATH79_DEV_GPIO_BUTTONS
-	select ATH79_DEV_LEDS_GPIO
-	select ATH79_DEV_USB
-	select ATH79_DEV_ETH
-
 config ATH79_MACH_AP132
 	bool "Atheros AP132 reference board"
 	select SOC_QCA955X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 03ca101..a39e8d2 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -46,7 +46,6 @@ obj-$(CONFIG_ATH79_MACH_ALL0315N)		+= mach-all0315n.o
 obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)		+= mach-antminer-s1.o
 obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)		+= mach-antminer-s3.o
 obj-$(CONFIG_ATH79_MACH_ANTROUTER_R1)		+= mach-antrouter-r1.o
-obj-$(CONFIG_ATH79_MACH_AP113)			+= mach-ap113.o
 obj-$(CONFIG_ATH79_MACH_AP121)			+= mach-ap121.o
 obj-$(CONFIG_ATH79_MACH_AP132)			+= mach-ap132.o
 obj-$(CONFIG_ATH79_MACH_AP136)			+= mach-ap136.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c
deleted file mode 100644
index 9b38faa..0000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  Atheros AP113 board support
- *
- *  Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "pci.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define AP113_GPIO_LED_USB		0
-#define AP113_GPIO_LED_STATUS		1
-#define AP113_GPIO_LED_ST		11
-
-#define AP113_GPIO_BTN_JUMPSTART	12
-
-#define AP113_KEYS_POLL_INTERVAL	20	/* msecs */
-#define AP113_KEYS_DEBOUNCE_INTERVAL	(3 * AP113_KEYS_POLL_INTERVAL)
-
-static struct gpio_led ap113_leds_gpio[] __initdata = {
-	{
-		.name		= "ap113:green:usb",
-		.gpio		= AP113_GPIO_LED_USB,
-		.active_low	= 1,
-	},
-	{
-		.name		= "ap113:green:status",
-		.gpio		= AP113_GPIO_LED_STATUS,
-		.active_low	= 1,
-	},
-	{
-		.name		= "ap113:green:st",
-		.gpio		= AP113_GPIO_LED_ST,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
-	{
-		.desc		= "jumpstart button",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= AP113_GPIO_BTN_JUMPSTART,
-		.active_low	= 1,
-	},
-};
-
-static void __init ap113_setup(void)
-{
-	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
-	ath79_register_m25p80(NULL);
-
-	ath79_register_mdio(0, ~BIT(0));
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.phy_mask = BIT(0);
-
-	ath79_register_eth(0);
-
-	ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(ap113_gpio_keys),
-					 ap113_gpio_keys);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
-					ap113_leds_gpio);
-
-	ath79_register_pci();
-
-	ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
-	     ap113_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index cd26598..5893790 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -26,7 +26,6 @@ enum ath79_mach_type {
 	ATH79_MACH_ANTMINER_S1,			/* Antminer S1 */
 	ATH79_MACH_ANTMINER_S3,			/* Antminer S3 */
 	ATH79_MACH_ANTROUTER_R1,		/* Antrouter R1 */
-	ATH79_MACH_AP113,			/* Atheros AP113 reference board */
 	ATH79_MACH_AP121,			/* Atheros AP121 reference board */
 	ATH79_MACH_AP121_MINI,			/* Atheros AP121-MINI reference board */
 	ATH79_MACH_AP132,			/* Atheros AP132 reference board */