ar71xx: Add kernel 4.9 support

This add support for kernel 4.9 to the ar71xx target.
It was compile tested with the generic, NAND and mikrotik subtarget.
Multiple members of the community tested it on their boards and did not
report any major problem so far.

Especially the NAND part received some changes to adapt to the new
kernel APIs. The serial driver hack used for the Arduino Yun was not
ported because the kernel changed there a lot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

2 files changed, 31 insertions, 1 deletions

diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c
index b63a4b7..2915476 100644
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c
+++ b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c
@@ -254,7 +254,11 @@ static int ag71xx_mdio_probe(struct platform_device *pdev)
 	am->mii_bus->read = ag71xx_mdio_read;
 	am->mii_bus->write = ag71xx_mdio_write;
 	am->mii_bus->reset = ag71xx_mdio_reset;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
 	am->mii_bus->irq = am->mii_irq;
+#else
+	memcpy(am->mii_bus->irq, am->mii_irq, sizeof(am->mii_bus->irq));
+#endif
 	am->mii_bus->priv = am;
 	am->mii_bus->parent = &pdev->dev;
 	snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
index 9de77e9..12fa2e3 100644
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
+++ b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
@@ -112,6 +112,7 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag)
 		if (!(pdata->phy_mask & (1 << phy_addr)))
 			continue;
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
 		if (ag->mii_bus->phy_map[phy_addr] == NULL)
 			continue;
 
@@ -122,6 +123,18 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag)
 
 		if (phydev == NULL)
 			phydev = ag->mii_bus->phy_map[phy_addr];
+#else
+		if (ag->mii_bus->mdio_map[phy_addr] == NULL)
+			continue;
+
+		DBG("%s: PHY found at %s, uid=%08x\n",
+			dev_name(dev),
+			dev_name(&ag->mii_bus->mdio_map[phy_addr]->dev),
+			ag->mii_bus->mdio_map[phy_addr]->phy_id);
+
+		if (phydev == NULL)
+			phydev = mdiobus_get_phy(ag->mii_bus, phy_addr);
+#endif
 	}
 
 	if (!phydev) {
@@ -130,13 +143,21 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag)
 		return -ENODEV;
 	}
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
 	ag->phy_dev = phy_connect(ag->dev, dev_name(&phydev->dev),
+#else
+	ag->phy_dev = phy_connect(ag->dev, phydev_name(phydev),
+#endif
 				  &ag71xx_phy_link_adjust,
 				  pdata->phy_if_mode);
 
 	if (IS_ERR(ag->phy_dev)) {
 		dev_err(dev, "could not connect to PHY at %s\n",
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
 			   dev_name(&phydev->dev));
+#else
+			   phydev_name(phydev));
+#endif
 		return PTR_ERR(ag->phy_dev);
 	}
 
@@ -149,7 +170,12 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag)
 	phydev->advertising = phydev->supported;
 
 	dev_info(dev, "connected to PHY at %s [uid=%08x, driver=%s]\n",
-		    dev_name(&phydev->dev), phydev->phy_id, phydev->drv->name);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
+		    dev_name(&phydev->dev),
+#else
+		    phydev_name(phydev),
+#endif
+		    phydev->phy_id, phydev->drv->name);
 
 	ag->link = 0;
 	ag->speed = 0;