move MyLoader stuff into generic files, will be used on adm5120

SVN-Revision: 13254

3 files changed, 0 insertions, 184 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/fw/myloader/Makefile b/target/linux/ar71xx/files/arch/mips/fw/myloader/Makefile
deleted file mode 100644
index 34acfd0..0000000
--- a/target/linux/ar71xx/files/arch/mips/fw/myloader/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Compex's MyLoader support on MIPS architecture
-#
-
-lib-y += myloader.o
diff --git a/target/linux/ar71xx/files/arch/mips/fw/myloader/myloader.c b/target/linux/ar71xx/files/arch/mips/fw/myloader/myloader.c
deleted file mode 100644
index a26f9ad..0000000
--- a/target/linux/ar71xx/files/arch/mips/fw/myloader/myloader.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  Compex's MyLoader specific prom routines
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/addrspace.h>
-#include <asm/fw/myloader/myloader.h>
-
-#define SYS_PARAMS_ADDR		KSEG1ADDR(0x80000800)
-#define BOARD_PARAMS_ADDR	KSEG1ADDR(0x80000A00)
-#define PART_TABLE_ADDR		KSEG1ADDR(0x80000C00)
-#define BOOT_PARAMS_ADDR	KSEG1ADDR(0x80000E00)
-
-static struct myloader_info myloader_info __initdata;
-static int myloader_found __initdata;
-
-struct myloader_info * __init myloader_get_info(void)
-{
-	struct mylo_system_params *sysp;
-	struct mylo_board_params *boardp;
-	struct mylo_partition_table *parts;
-
-	if (myloader_found)
-		return &myloader_info;
-
-	sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
-	boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
-	parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
-
-	printk(KERN_DEBUG "MyLoader: sysp=%08x, boardp=%08x, parts=%08x\n",
-		sysp->magic, boardp->magic, parts->magic);
-
-	/* Check for some magic numbers */
-	if (sysp->magic != MYLO_MAGIC_SYS_PARAMS ||
-	    boardp->magic != MYLO_MAGIC_BOARD_PARAMS ||
-	    le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS)
-		return NULL;
-
-	printk(KERN_DEBUG "MyLoader: id=%04x:%04x, sub_id=%04x:%04x\n",
-		sysp->vid, sysp->did, sysp->svid, sysp->sdid);
-
-	myloader_info.vid = sysp->vid;
-	myloader_info.did = sysp->did;
-	myloader_info.svid = sysp->svid;
-	myloader_info.sdid = sysp->sdid;
-
-	memcpy(myloader_info.macs, boardp->addr, sizeof(myloader_info.macs));
-
-	myloader_found = 1;
-
-	return &myloader_info;
-}
diff --git a/target/linux/ar71xx/files/include/linux/myloader.h b/target/linux/ar71xx/files/include/linux/myloader.h
deleted file mode 100644
index c16c413..0000000
--- a/target/linux/ar71xx/files/include/linux/myloader.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  Compex's MyLoader specific definitions
- *
- *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MYLOADER_H_
-#define _MYLOADER_H_
-
-/* Myloader specific magic numbers */
-#define MYLO_MAGIC_SYS_PARAMS	0x20021107
-#define MYLO_MAGIC_PARTITIONS	0x20021103
-#define MYLO_MAGIC_BOARD_PARAMS	0x20021103
-
-/* Vendor ID's (seems to be same as the PCI vendor ID's) */
-#define VENID_COMPEX		0x11F6
-
-/* Devices based on the ADM5120 */
-#define DEVID_COMPEX_NP27G	0x0078
-#define DEVID_COMPEX_NP28G	0x044C
-#define DEVID_COMPEX_NP28GHS	0x044E
-#define DEVID_COMPEX_WP54Gv1C	0x0514
-#define DEVID_COMPEX_WP54G	0x0515
-#define DEVID_COMPEX_WP54AG	0x0546
-#define DEVID_COMPEX_WPP54AG	0x0550
-#define DEVID_COMPEX_WPP54G	0x0555
-
-/* Devices based on the Atheros AR71xx */
-#define DEVID_COMPEX_WP543	0x0640
-
-/* Devices based on the IXP422 */
-#define DEVID_COMPEX_WP18	0x047E
-#define DEVID_COMPEX_NP18A	0x0489
-
-/* Other devices */
-#define DEVID_COMPEX_NP26G8M	0x03E8
-#define DEVID_COMPEX_NP26G16M	0x03E9
-
-struct mylo_partition {
-	uint16_t	flags;	/* partition flags */
-	uint16_t	type;	/* type of the partition */
-	uint32_t	addr;	/* relative address of the partition from the
-				   flash start */
-	uint32_t	size;	/* size of the partition in bytes */
-	uint32_t	param;	/* if this is the active partition, the
-				   MyLoader load code to this address */
-};
-
-#define PARTITION_FLAG_ACTIVE	0x8000 /* this is the active partition,
-					* MyLoader loads firmware from here */
-#define PARTITION_FLAG_ISRAM	0x2000 /* FIXME: this is a RAM partition? */
-#define PARTIIION_FLAG_RAMLOAD	0x1000 /* FIXME: load this partition into the RAM? */
-#define PARTITION_FLAG_PRELOAD	0x0800 /* the partition data preloaded to RAM
-					* before decompression */
-#define PARTITION_FLAG_LZMA	0x0100 /* partition data compressed by LZMA */
-#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
-
-#define PARTITION_TYPE_FREE	0
-#define PARTITION_TYPE_USED	1
-
-#define MYLO_MAX_PARTITIONS	8	/* maximum number of partitions in the
-					   partition table */
-
-struct mylo_partition_table {
-	uint32_t	magic;		/* must be MYLO_MAGIC_PARTITIONS */
-	uint32_t	res0;		/* unknown/unused */
-	uint32_t	res1;		/* unknown/unused */
-	uint32_t 	res2;		/* unknown/unused */
-	struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
-};
-
-struct mylo_partition_header {
-	uint32_t	len;		/* length of the partition data */
-	uint32_t	crc;		/* CRC value of the partition data */
-};
-
-struct mylo_system_params {
-	uint32_t	magic;		/* must be MYLO_MAGIC_SYS_PARAMS */
-	uint32_t	res0;
-	uint32_t	res1;
-	uint32_t	mylo_ver;
-	uint16_t	vid;		/* Vendor ID */
-	uint16_t	did;		/* Device ID */
-	uint16_t	svid;		/* Sub Vendor ID */
-	uint16_t	sdid;		/* Sub Device ID */
-	uint32_t	rev;		/* device revision */
-	uint32_t	fwhi;
-	uint32_t	fwlo;
-	uint32_t	tftp_addr;
-	uint32_t	prog_start;
-	uint32_t	flash_size;	/* size of boot FLASH in bytes */
-	uint32_t	dram_size;	/* size of onboard RAM in bytes */
-};
-
-struct mylo_eth_addr {
-	uint8_t	mac[6];
-	uint8_t	csum[2];
-};
-
-#define MYLO_ETHADDR_COUNT	8	/* maximum number of ethernet address
-					   in the board parameters */
-
-struct mylo_board_params {
-	uint32_t	magic;	/* must be MYLO_MAGIC_BOARD_PARAMS */
-	uint32_t	res0;
-	uint32_t	res1;
-	uint32_t	res2;
-	struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
-};
-
-#endif /* _MYLOADER_H_*/