ar71xx: Buffalo WLAE-AG300N initial support

The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931

1 files changed, 114 insertions, 0 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
new file mode 100644
index 0000000..11006fd
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
@@ -0,0 +1,114 @@
+/*
+ *  Buffalo WLAE-AG300N board support
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WLAEAG300N_MAC_OFFSET		0x20c
+#define WLAEAG300N_KEYS_POLL_INTERVAL	20      /* msecs */
+#define WLAEAG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLAEAG300N_KEYS_POLL_INTERVAL)
+
+
+static struct gpio_led wlaeag300n_leds_gpio[] __initdata = {
+	/*
+	 * Note: Writing 1 into GPIO 13 will power down the device.
+	 */
+	{
+		.name		= "buffalo:green:wireless",
+		.gpio		= 14,
+		.active_low	= 1,
+	}, {
+		.name		= "buffalo:red:wireless",
+		.gpio		= 15,
+		.active_low	= 1,
+	}, {
+		.name		= "buffalo:green:status",
+		.gpio		= 16,
+		.active_low	= 1,
+	}, {
+		.name		= "buffalo:red:status",
+		.gpio		= 17,
+		.active_low	= 1,
+	}
+};
+
+
+static struct gpio_keys_button wlaeag300n_gpio_keys[] __initdata = {
+	{
+		.desc		= "function",
+		.type		= EV_KEY,
+		.code		= KEY_MODE,
+		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 0,
+		.active_low	= 1,
+	}, {
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 1,
+		.active_low	= 1,
+	}, {
+		.desc		= "power",
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 11,
+		.active_low	= 1,
+	}, {
+		.desc		= "aoss",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= 12,
+		.active_low	= 1,
+	}
+};
+
+static void __init wlaeag300n_setup(void)
+{
+	u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1fff1000);
+	u8 *mac1 = eeprom1 + WLAEAG300N_MAC_OFFSET;
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 1);
+
+	ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
+
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_data.speed = SPEED_1000;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_data.phy_mask = BIT(0);
+
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth1_data.phy_mask = BIT(4);
+
+	ath79_register_eth(0);
+	ath79_register_eth(1);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(wlaeag300n_leds_gpio),
+					wlaeag300n_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, WLAEAG300N_KEYS_POLL_INTERVAL,
+					 ARRAY_SIZE(wlaeag300n_gpio_keys),
+					 wlaeag300n_gpio_keys);
+
+	ath79_register_m25p80(NULL);
+
+	ap91_pci_init(eeprom1, mac1);
+}
+
+MIPS_MACHINE(ATH79_MACH_WLAE_AG300N, "WLAE-AG300N",
+	     "Buffalo WLAE-AG300N", wlaeag300n_setup);