diff options
| author | David Bauer <mail@david-bauer.net> | 2018-04-24 19:52:13 +0200 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-05-07 10:42:26 +0200 |
| commit | b6a4c674684585902ee07a4ba7c89d988d633650 (patch) | |
| tree | 37fe2cf0fcaf56bd88f3a5b293acd2337ba60cfd /target/linux/ar71xx/image/generic.mk | |
| parent | 66c8afd115f4d03fefc0e650b90dd922487cc50f (diff) | |
| download | mtk-20170518-b6a4c674684585902ee07a4ba7c89d988d633650.zip mtk-20170518-b6a4c674684585902ee07a4ba7c89d988d633650.tar.gz mtk-20170518-b6a4c674684585902ee07a4ba7c89d988d633650.tar.bz2 | |
ar71xx: add support for Fritz!Box 4020
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.
SoC: Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM: Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi: QCA9561 b/g/n 3x3 450Mbit/s
USB: 1x USB 2.0
IN: WPS button, WiFi button
OUT: Power LED green, Internet LED green, WLAN LED green,
LAN LED green, INFO LED green, INFO LED red
UART: Header Next to Black metal shield
Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet (LAN + WAN)
- WiFi (correct MAC)
- Installation via EVA bootloader
- OpenWRT sysupgrade
- Buttons
- LEDs
Not working:
- USB port
Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
like following:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put openwrt-sysupgrade.bin mtd1
Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ar71xx/image/generic.mk')
| -rw-r--r-- | target/linux/ar71xx/image/generic.mk | 27 |
1 files changed, 21 insertions, 6 deletions
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 0d3aedb..a0f6326 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -1282,16 +1282,31 @@ define Device/zbt-we1526 endef TARGET_DEVICES += zbt-we1526 -define Device/fritz300e - DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E - DEVICE_PACKAGES := fritz-tffs rssileds -swconfig -uboot-envtools - BOARDNAME := FRITZ300E - SUPPORTED_DEVICES := fritz300e - IMAGE_SIZE := 15232k +define Device/AVM + DEVICE_PACKAGES := fritz-tffs -uboot-envtools KERNEL := kernel-bin | patch-cmdline | lzma | eva-image KERNEL_INITRAMFS := $$(KERNEL) IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ append-squashfs-fakeroot-be | pad-to 256 | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef + +define Device/fritz300e + $(call Device/AVM) + DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E + DEVICE_PACKAGES := rssileds -swconfig + BOARDNAME := FRITZ300E + SUPPORTED_DEVICES := fritz300e + IMAGE_SIZE := 15232k +endef TARGET_DEVICES += fritz300e + +define Device/fritz4020 + $(call Device/AVM) + DEVICE_TITLE := AVM FRITZ!Box 4020 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage + BOARDNAME := FRITZ4020 + SUPPORTED_DEVICES := fritz4020 + IMAGE_SIZE := 15232k +endef +TARGET_DEVICES += fritz4020 |