ar71xx: nuke 3.2 support

SVN-Revision: 31360

1 files changed, 0 insertions, 153 deletions

diff --git a/target/linux/ar71xx/patches-3.2/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-3.2/606-MIPS-ath79-pb44-fixes.patch
deleted file mode 100644
index 6f1829f..0000000
--- a/target/linux/ar71xx/patches-3.2/606-MIPS-ath79-pb44-fixes.patch
+++ /dev/null
@@ -1,153 +0,0 @@
---- a/arch/mips/ath79/mach-pb44.c
-+++ b/arch/mips/ath79/mach-pb44.c
-@@ -8,23 +8,48 @@
-  *  by the Free Software Foundation.
-  */
- 
-+#include <linux/delay.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- #include <linux/i2c/pcf857x.h>
-+#include <linux/i2c/pcf857x.h>
-+#include <linux/spi/flash.h>
-+#include <linux/spi/vsc7385.h>
- 
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+#include <asm/mach-ath79/ath79.h>
-+
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
-+#include "machtypes.h"
- #include "pci.h"
- 
- #define PB44_GPIO_I2C_SCL	0
- #define PB44_GPIO_I2C_SDA	1
- 
-+#define PB44_PCF8757_VSC7395_CS	0
-+#define PB44_PCF8757_STEREO_CS	1
-+#define PB44_PCF8757_SLIC_CS0	2
-+#define PB44_PCF8757_SLIC_TEST	3
-+#define PB44_PCF8757_SLIC_INT0	4
-+#define PB44_PCF8757_SLIC_INT1	5
-+#define PB44_PCF8757_SW_RESET	6
-+#define PB44_PCF8757_SW_JUMP	8
-+#define PB44_PCF8757_LED_JUMP1	9
-+#define PB44_PCF8757_LED_JUMP2	10
-+#define PB44_PCF8757_TP24	11
-+#define PB44_PCF8757_TP25	12
-+#define PB44_PCF8757_TP26	13
-+#define PB44_PCF8757_TP27	14
-+#define PB44_PCF8757_TP28	15
-+
- #define PB44_GPIO_EXP_BASE	16
-+#define PB44_GPIO_VSC7395_CS	(PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
- #define PB44_GPIO_SW_RESET	(PB44_GPIO_EXP_BASE + 6)
- #define PB44_GPIO_SW_JUMP	(PB44_GPIO_EXP_BASE + 8)
- #define PB44_GPIO_LED_JUMP1	(PB44_GPIO_EXP_BASE + 9)
-@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data
- 	.cs_line = 0,
- };
- 
-+static struct ath79_spi_controller_data pb44_spi1_data = {
-+	.cs_type = ATH79_SPI_CS_TYPE_GPIO,
-+	.cs_line = PB44_GPIO_VSC7395_CS,
-+};
-+
-+static void pb44_vsc7395_reset(void)
-+{
-+	ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
-+	udelay(10);
-+	ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
-+	mdelay(50);
-+}
-+
-+static struct vsc7385_platform_data pb44_vsc7395_data = {
-+	.reset		= pb44_vsc7395_reset,
-+	.ucode_name	= "vsc7395_ucode_pb44.bin",
-+	.mac_cfg = {
-+		.tx_ipg		= 6,
-+		.bit2		= 1,
-+		.clk_sel	= 0,
-+	},
-+};
-+
-+static const char *pb44_part_probes[] = {
-+	"RedBoot",
-+	NULL,
-+};
-+
-+static struct flash_platform_data pb44_flash_data = {
-+	.part_probes	= pb44_part_probes,
-+};
-+
- static struct spi_board_info pb44_spi_info[] = {
- 	{
- 		.bus_num	= 0,
- 		.chip_select	= 0,
- 		.max_speed_hz	= 25000000,
- 		.modalias	= "m25p64",
-+		.platform_data	= &pb44_flash_data,
- 		.controller_data = &pb44_spi0_data,
- 	},
-+	{
-+		.bus_num	= 0,
-+		.chip_select	= 1,
-+		.max_speed_hz	= 25000000,
-+		.modalias	= "spi-vsc7385",
-+		.platform_data	= &pb44_vsc7395_data,
-+		.controller_data = &pb44_spi1_data,
-+	}
- };
- 
- static struct ath79_spi_platform_data pb44_spi_data = {
- 	.bus_num		= 0,
--	.num_chipselect		= 1,
-+	.num_chipselect		= 2,
- };
- 
-+#define PB44_WAN_PHYMASK	BIT(0)
-+#define PB44_LAN_PHYMASK	0
-+#define PB44_MDIO_PHYMASK	(PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
-+
- static void __init pb44_init(void)
- {
- 	i2c_register_board_info(0, pb44_i2c_board_info,
-@@ -122,6 +192,22 @@ static void __init pb44_init(void)
- 			   ARRAY_SIZE(pb44_spi_info));
- 	ath79_register_usb();
- 	ath79_register_pci();
-+
-+	ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
-+
-+	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+	ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
-+
-+	ath79_register_eth(0);
-+
-+	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+	ath79_eth1_data.speed = SPEED_1000;
-+	ath79_eth1_data.duplex = DUPLEX_FULL;
-+	ath79_eth1_pll_data.pll_1000 = 0x110000;
-+
-+	ath79_register_eth(1);
- }
- 
- MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -45,6 +45,7 @@ config ATH79_MACH_DB120
- config ATH79_MACH_PB44
- 	bool "Atheros PB44 reference board"
- 	select SOC_AR71XX
-+	select ATH79_DEV_ETH
- 	select ATH79_DEV_GPIO_BUTTONS
- 	select ATH79_DEV_LEDS_GPIO
- 	select ATH79_DEV_SPI