ar71xx: add initial support for 3.2

Tested on the following boards:
  ALFA AP96
  TL-MR3220 v1
  TL-WR1043ND v1
  TL-WR2543ND v1
  TL-WR703N v1
  TL-WR741ND v1
  TL-WR741ND v4
  WNDR3700 v1
  WZR-HP-G300NH

SVN-Revision: 29868

1 files changed, 187 insertions, 0 deletions

diff --git a/target/linux/ar71xx/patches-3.2/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.2/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
new file mode 100644
index 0000000..982860f
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.2/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
@@ -0,0 +1,187 @@
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -13,15 +13,17 @@
+ #include <linux/init.h>
+ #include <linux/pci.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/etherdevice.h>
+ 
+ #include <asm/mach-ath79/irq.h>
+ 
+ #include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-m25p80.h"
++#include "dev-usb.h"
+ #include "machtypes.h"
+-#include "pci.h"
+ 
+ #define UBNT_XM_GPIO_LED_L1		0
+ #define UBNT_XM_GPIO_LED_L2		1
+@@ -37,19 +39,19 @@
+ 
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+ 	{
+-		.name		= "ubnt-xm:red:link1",
++		.name		= "ubnt:red:link1",
+ 		.gpio		= UBNT_XM_GPIO_LED_L1,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:orange:link2",
++		.name		= "ubnt:orange:link2",
+ 		.gpio		= UBNT_XM_GPIO_LED_L2,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:green:link3",
++		.name		= "ubnt:green:link3",
+ 		.gpio		= UBNT_XM_GPIO_LED_L3,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:green:link4",
++		.name		= "ubnt:green:link4",
+ 		.gpio		= UBNT_XM_GPIO_LED_L4,
+ 		.active_low	= 0,
+ 	},
+@@ -66,9 +68,13 @@ static struct gpio_keys_button ubnt_xm_g
+ 	}
+ };
+ 
++#define UBNT_M_WAN_PHYMASK	BIT(4)
++
+ static void __init ubnt_xm_init(void)
+ {
+ 	u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+ 
+ 	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+ 				 ubnt_xm_leds_gpio);
+@@ -79,9 +85,99 @@ static void __init ubnt_xm_init(void)
+ 
+ 	ath79_register_m25p80(NULL);
+ 	ap91_pci_init(eeprom, NULL);
++
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++	ath79_register_eth(0);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+ 	     "UBNT-XM",
+ 	     "Ubiquiti Networks XM (rev 1.0) board",
+ 	     ubnt_xm_init);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
++	     ubnt_xm_init);
++
++static void __init ubnt_rocket_m_setup(void)
++{
++	ubnt_xm_init();
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
++	     ubnt_rocket_m_setup);
++
++static void __init ubnt_nano_m_setup(void)
++{
++	ubnt_xm_init();
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
++	     ubnt_nano_m_setup);
++
++static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:green:globe",
++		.gpio		= 0,
++		.active_low	= 1,
++	}
++};
++
++static void __init ubnt_airrouter_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++	ath79_register_usb();
++
++	ap91_pci_init(ee, NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
++				 ubnt_airrouter_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
++	     ubnt_airrouter_setup);
++
++static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:orange:dome",
++		.gpio		= 1,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:dome",
++		.gpio		= 0,
++		.active_low	= 0,
++	}
++};
++
++static void __init ubnt_unifi_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_register_eth(0);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
++				 ubnt_unifi_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
++	     ubnt_unifi_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -58,9 +58,11 @@ config ATH79_MACH_UBNT_XM
+ 	bool "Ubiquiti Networks XM (rev 1.0) board"
+ 	select SOC_AR724X
+ 	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+ 	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
+ 	help
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  Ubiquiti Networks XM (rev 1.0) board.
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -21,6 +21,11 @@ enum ath79_mach_type {
+ 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
+ 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
+ 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
++	ATH79_MACH_UBNT_AIRROUTER,	/* Ubiquiti AirRouter */
++	ATH79_MACH_UBNT_BULLET_M,	/* Ubiquiti Bullet M */
++	ATH79_MACH_UBNT_NANO_M, 	/* Ubiquiti NanoStation M */
++	ATH79_MACH_UBNT_ROCKET_M,	/* Ubiquiti Rocket M */
++	ATH79_MACH_UBNT_UNIFI, 		/* Ubiquiti Unifi */
+ 	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
+ };
+