ar71xx: nuke 3.3 support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34743

1 files changed, 0 insertions, 209 deletions

diff --git a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch
deleted file mode 100644
index 97d8b53..0000000
--- a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch
+++ /dev/null
@@ -1,209 +0,0 @@
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -2,7 +2,7 @@
-  * Atheros DB120 reference board support
-  *
-  * Copyright (c) 2011 Qualcomm Atheros
-- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
-  *
-  * Permission to use, copy, modify, and/or distribute this software for any
-  * purpose with or without fee is hereby granted, provided that the above
-@@ -19,16 +19,26 @@
-  */
- 
- #include <linux/pci.h>
-+#include <linux/phy.h>
-+#include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-+#include <linux/ar8216_platform.h>
- 
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "dev-ap9x-pci.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
-+#include "dev-m25p80.h"
-+#include "dev-nfc.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
- 
-+#define DB120_GPIO_LED_USB		11
- #define DB120_GPIO_LED_WLAN_5G		12
- #define DB120_GPIO_LED_WLAN_2G		13
- #define DB120_GPIO_LED_STATUS		14
-@@ -39,8 +49,10 @@
- #define DB120_KEYS_POLL_INTERVAL	20	/* msecs */
- #define DB120_KEYS_DEBOUNCE_INTERVAL	(3 * DB120_KEYS_POLL_INTERVAL)
- 
--#define DB120_WMAC_CALDATA_OFFSET 0x1000
--#define DB120_PCIE_CALDATA_OFFSET 0x5000
-+#define DB120_MAC0_OFFSET		0
-+#define DB120_MAC1_OFFSET		6
-+#define DB120_WMAC_CALDATA_OFFSET	0x1000
-+#define DB120_PCIE_CALDATA_OFFSET	0x5000
- 
- static struct gpio_led db120_leds_gpio[] __initdata = {
- 	{
-@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
- 		.gpio		= DB120_GPIO_LED_WLAN_2G,
- 		.active_low	= 1,
- 	},
-+	{
-+		.name		= "db120:green:usb",
-+		.gpio		= DB120_GPIO_LED_USB,
-+		.active_low	= 1,
-+	}
- };
- 
- static struct gpio_keys_button db120_gpio_keys[] __initdata = {
-@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi
- 	},
- };
- 
--static struct ath79_spi_controller_data db120_spi0_data = {
--	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
--	.cs_line = 0,
-+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
-+	.mode = AR8327_PAD_MAC_RGMII,
-+	.txclk_delay_en = true,
-+	.rxclk_delay_en = true,
-+	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- };
- 
--static struct spi_board_info db120_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "s25sl064a",
--		.controller_data = &db120_spi0_data,
--	}
-+static struct ar8327_led_cfg db120_ar8327_led_cfg = {
-+	.led_ctrl0 = 0x00000000,
-+	.led_ctrl1 = 0xc737c737,
-+	.led_ctrl2 = 0x00000000,
-+	.led_ctrl3 = 0x00c30c00,
-+	.open_drain = true,
- };
- 
--static struct ath79_spi_platform_data db120_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect	= 1,
-+static struct ar8327_platform_data db120_ar8327_data = {
-+	.pad0_cfg = &db120_ar8327_pad0_cfg,
-+	.cpuport_cfg = {
-+		.force_link = 1,
-+		.speed = AR8327_PORT_SPEED_1000,
-+		.duplex = 1,
-+		.txpause = 1,
-+		.rxpause = 1,
-+	},
-+	.led_cfg = &db120_ar8327_led_cfg,
- };
- 
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data db120_ath9k_data;
--
--static int db120_pci_plat_dev_init(struct pci_dev *dev)
--{
--	switch (PCI_SLOT(dev->devfn)) {
--	case 0:
--		dev->dev.platform_data = &db120_ath9k_data;
--		break;
--	}
--
--	return 0;
--}
--
--static void __init db120_pci_init(u8 *eeprom)
--{
--	memcpy(db120_ath9k_data.eeprom_data, eeprom,
--	       sizeof(db120_ath9k_data.eeprom_data));
--
--	ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
--	ath79_register_pci();
--}
--#else
--static inline void db120_pci_init(void) {}
--#endif /* CONFIG_PCI */
-+static struct mdio_board_info db120_mdio0_info[] = {
-+	{
-+		.bus_id = "ag71xx-mdio.0",
-+		.phy_addr = 0,
-+		.platform_data = &db120_ar8327_data,
-+	},
-+};
- 
- static void __init db120_setup(void)
- {
- 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- 
-+	ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
-+	ath79_register_m25p80(NULL);
-+
- 	ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
- 				 db120_leds_gpio);
- 	ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
- 					ARRAY_SIZE(db120_gpio_keys),
- 					db120_gpio_keys);
--	ath79_register_spi(&db120_spi_data, db120_spi_info,
--			   ARRAY_SIZE(db120_spi_info));
- 	ath79_register_usb();
- 	ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
--	db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
-+	ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
-+
-+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
-+				   AR934X_ETH_CFG_SW_ONLY_MODE);
-+
-+	ath79_register_mdio(1, 0x0);
-+	ath79_register_mdio(0, 0x0);
-+
-+	ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
-+
-+	mdiobus_register_board_info(db120_mdio0_info,
-+				    ARRAY_SIZE(db120_mdio0_info));
-+
-+	/* GMAC0 is connected to an AR8327 switch */
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+	ath79_eth0_data.phy_mask = BIT(0);
-+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+	ath79_eth0_pll_data.pll_1000 = 0x06000000;
-+	ath79_register_eth(0);
-+
-+	/* GMAC1 is connected to the internal switch */
-+	ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
-+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-+	ath79_eth1_data.speed = SPEED_1000;
-+	ath79_eth1_data.duplex = DUPLEX_FULL;
-+
-+	ath79_register_eth(1);
-+
-+	ath79_register_nfc();
- }
- 
- MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -43,9 +43,12 @@ config ATH79_MACH_AP81
- config ATH79_MACH_DB120
- 	bool "Atheros DB120 reference board"
- 	select SOC_AR934X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
- 	select ATH79_DEV_GPIO_BUTTONS
- 	select ATH79_DEV_LEDS_GPIO
--	select ATH79_DEV_SPI
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_NFC
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
- 	help