ar71xx: add preliminary support for 3.3

SVN-Revision: 30410

1 files changed, 153 insertions, 0 deletions

diff --git a/target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch
new file mode 100644
index 0000000..6f1829f
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/606-MIPS-ath79-pb44-fixes.patch
@@ -0,0 +1,153 @@
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -8,23 +8,48 @@
+  *  by the Free Software Foundation.
+  */
+ 
++#include <linux/delay.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c.h>
+ #include <linux/i2c-gpio.h>
+ #include <linux/i2c/pcf857x.h>
++#include <linux/i2c/pcf857x.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/vsc7385.h>
+ 
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
++#include "machtypes.h"
+ #include "pci.h"
+ 
+ #define PB44_GPIO_I2C_SCL	0
+ #define PB44_GPIO_I2C_SDA	1
+ 
++#define PB44_PCF8757_VSC7395_CS	0
++#define PB44_PCF8757_STEREO_CS	1
++#define PB44_PCF8757_SLIC_CS0	2
++#define PB44_PCF8757_SLIC_TEST	3
++#define PB44_PCF8757_SLIC_INT0	4
++#define PB44_PCF8757_SLIC_INT1	5
++#define PB44_PCF8757_SW_RESET	6
++#define PB44_PCF8757_SW_JUMP	8
++#define PB44_PCF8757_LED_JUMP1	9
++#define PB44_PCF8757_LED_JUMP2	10
++#define PB44_PCF8757_TP24	11
++#define PB44_PCF8757_TP25	12
++#define PB44_PCF8757_TP26	13
++#define PB44_PCF8757_TP27	14
++#define PB44_PCF8757_TP28	15
++
+ #define PB44_GPIO_EXP_BASE	16
++#define PB44_GPIO_VSC7395_CS	(PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
+ #define PB44_GPIO_SW_RESET	(PB44_GPIO_EXP_BASE + 6)
+ #define PB44_GPIO_SW_JUMP	(PB44_GPIO_EXP_BASE + 8)
+ #define PB44_GPIO_LED_JUMP1	(PB44_GPIO_EXP_BASE + 9)
+@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data
+ 	.cs_line = 0,
+ };
+ 
++static struct ath79_spi_controller_data pb44_spi1_data = {
++	.cs_type = ATH79_SPI_CS_TYPE_GPIO,
++	.cs_line = PB44_GPIO_VSC7395_CS,
++};
++
++static void pb44_vsc7395_reset(void)
++{
++	ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
++	udelay(10);
++	ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
++	mdelay(50);
++}
++
++static struct vsc7385_platform_data pb44_vsc7395_data = {
++	.reset		= pb44_vsc7395_reset,
++	.ucode_name	= "vsc7395_ucode_pb44.bin",
++	.mac_cfg = {
++		.tx_ipg		= 6,
++		.bit2		= 1,
++		.clk_sel	= 0,
++	},
++};
++
++static const char *pb44_part_probes[] = {
++	"RedBoot",
++	NULL,
++};
++
++static struct flash_platform_data pb44_flash_data = {
++	.part_probes	= pb44_part_probes,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+ 	{
+ 		.bus_num	= 0,
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 25000000,
+ 		.modalias	= "m25p64",
++		.platform_data	= &pb44_flash_data,
+ 		.controller_data = &pb44_spi0_data,
+ 	},
++	{
++		.bus_num	= 0,
++		.chip_select	= 1,
++		.max_speed_hz	= 25000000,
++		.modalias	= "spi-vsc7385",
++		.platform_data	= &pb44_vsc7395_data,
++		.controller_data = &pb44_spi1_data,
++	}
+ };
+ 
+ static struct ath79_spi_platform_data pb44_spi_data = {
+ 	.bus_num		= 0,
+-	.num_chipselect		= 1,
++	.num_chipselect		= 2,
+ };
+ 
++#define PB44_WAN_PHYMASK	BIT(0)
++#define PB44_LAN_PHYMASK	0
++#define PB44_MDIO_PHYMASK	(PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
++
+ static void __init pb44_init(void)
+ {
+ 	i2c_register_board_info(0, pb44_i2c_board_info,
+@@ -122,6 +192,22 @@ static void __init pb44_init(void)
+ 			   ARRAY_SIZE(pb44_spi_info));
+ 	ath79_register_usb();
+ 	ath79_register_pci();
++
++	ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
++
++	ath79_register_eth(0);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_eth1_pll_data.pll_1000 = 0x110000;
++
++	ath79_register_eth(1);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -45,6 +45,7 @@ config ATH79_MACH_DB120
+ config ATH79_MACH_PB44
+ 	bool "Atheros PB44 reference board"
+ 	select SOC_AR71XX
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+ 	select ATH79_DEV_SPI