ar71xx: add kernel support for the UniFi AP Pro

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34727

3 files changed, 115 insertions, 15 deletions

diff --git a/target/linux/ar71xx/patches-3.6/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.6/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
index 4b880e9..65576b6 100644
--- a/target/linux/ar71xx/patches-3.6/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
+++ b/target/linux/ar71xx/patches-3.6/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
@@ -1,12 +1,16 @@
 --- a/arch/mips/ath79/mach-ubnt-xm.c
 +++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -13,15 +13,17 @@
+@@ -12,16 +12,22 @@
+ 
  #include <linux/init.h>
  #include <linux/pci.h>
++#include <linux/platform_device.h>
  #include <linux/ath9k_platform.h>
 +#include <linux/etherdevice.h>
++#include <linux/ar8216_platform.h>
  
  #include <asm/mach-ath79/irq.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
  
  #include "dev-ap9x-pci.h"
 +#include "dev-eth.h"
@@ -14,12 +18,13 @@
  #include "dev-leds-gpio.h"
  #include "dev-m25p80.h"
 +#include "dev-usb.h"
++#include "dev-wmac.h"
  #include "machtypes.h"
 -#include "pci.h"
  
  #define UBNT_XM_GPIO_LED_L1		0
  #define UBNT_XM_GPIO_LED_L2		1
-@@ -37,19 +39,19 @@
+@@ -37,19 +43,19 @@
  
  static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
  	{
@@ -43,7 +48,7 @@
  		.gpio		= UBNT_XM_GPIO_LED_L4,
  		.active_low	= 0,
  	},
-@@ -66,9 +68,13 @@ static struct gpio_keys_button ubnt_xm_g
+@@ -66,9 +72,13 @@ static struct gpio_keys_button ubnt_xm_g
  	}
  };
  
@@ -57,7 +62,7 @@
  
  	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
  				 ubnt_xm_leds_gpio);
-@@ -79,9 +85,155 @@ static void __init ubnt_xm_init(void)
+@@ -79,9 +89,242 @@ static void __init ubnt_xm_init(void)
  
  	ath79_register_m25p80(NULL);
  	ap91_pci_init(eeprom, NULL);
@@ -158,7 +163,6 @@
 +	}
 +};
 +
-+
 +static void __init ubnt_unifi_setup(void)
 +{
 +	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
@@ -213,23 +217,117 @@
 +MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
 +	     "Ubiquiti UniFiAP Outdoor",
 +	     ubnt_unifi_outdoor_setup);
++
++static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
++	{
++		.name		= "ubnt:white:dome",
++		.gpio		= 12,
++	}, {
++		.name		= "ubnt:blue:dome",
++		.gpio		= 13,
++	}
++};
++
++static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
++	{
++		.desc			= "reset",
++		.type			= EV_KEY,
++		.code			= KEY_RESTART,
++		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
++		.gpio			= 17,
++		.active_low		= 1,
++	}
++};
++
++static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_platform_data uap_pro_ar8327_data = {
++	.pad0_cfg = &uap_pro_ar8327_pad0_cfg,
++	.cpuport_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info uap_pro_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &uap_pro_ar8327_data,
++	},
++};
++
++#define UAP_PRO_MAC0_OFFSET		0x0000
++#define UAP_PRO_MAC1_OFFSET		0x0006
++#define UAP_PRO_WMAC_CALDATA_OFFSET	0x1000
++#define UAP_PRO_PCI_CALDATA_OFFSET	0x5000
++
++static void __init ubnt_uap_pro_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
++				 ubnt_uap_pro_gpio_leds);
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(uap_pro_gpio_keys),
++                                        uap_pro_gpio_keys);
++
++	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++	ath79_register_mdio(0, 0x0);
++	mdiobus_register_board_info(uap_pro_mdio0_info,
++				    ARRAY_SIZE(uap_pro_mdio0_info));
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++	/* GMAC0 is connected to an AR8327 switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
++	     ubnt_uap_pro_setup);
++
 --- a/arch/mips/ath79/Kconfig
 +++ b/arch/mips/ath79/Kconfig
-@@ -71,9 +71,11 @@ config ATH79_MACH_UBNT_XM
- 	bool "Ubiquiti Networks XM (rev 1.0) board"
+@@ -68,12 +68,16 @@ config ATH79_MACH_PB44
+ 	  Atheros PB44 reference board.
+ 
+ config ATH79_MACH_UBNT_XM
+-	bool "Ubiquiti Networks XM (rev 1.0) board"
++	bool "Ubiquiti Networks XM/UniFi boards"
  	select SOC_AR724X
++	select SOC_AR934X
  	select ATH79_DEV_AP9X_PCI if PCI
 +	select ATH79_DEV_ETH
  	select ATH79_DEV_GPIO_BUTTONS
  	select ATH79_DEV_LEDS_GPIO
  	select ATH79_DEV_M25P80
 +	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
  	help
  	  Say 'Y' here if you want your kernel to support the
  	  Ubiquiti Networks XM (rev 1.0) board.
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -22,6 +22,12 @@ enum ath79_mach_type {
+@@ -22,6 +22,13 @@ enum ath79_mach_type {
  	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
  	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
  	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
@@ -237,6 +335,7 @@
 +	ATH79_MACH_UBNT_BULLET_M,	/* Ubiquiti Bullet M */
 +	ATH79_MACH_UBNT_NANO_M, 	/* Ubiquiti NanoStation M */
 +	ATH79_MACH_UBNT_ROCKET_M,	/* Ubiquiti Rocket M */
++	ATH79_MACH_UBNT_UAP_PRO,	/* Ubiquiti UniFi AP Pro */
 +	ATH79_MACH_UBNT_UNIFI, 		/* Ubiquiti Unifi */
 +	ATH79_MACH_UBNT_UNIFI_OUTDOOR,	/* Ubiquiti UnifiAP Outdoor */
  	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
diff --git a/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch
index 1ef47e6..eba0cbd 100644
--- a/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,19 +16,103 @@
+@@ -16,20 +16,104 @@
  
  enum ath79_mach_type {
  	ATH79_MACH_GENERIC = 0,
@@ -82,6 +82,7 @@
  	ATH79_MACH_UBNT_ROCKET_M,	/* Ubiquiti Rocket M */
 +	ATH79_MACH_UBNT_RSPRO,		/* Ubiquiti RouterStation Pro */
 +	ATH79_MACH_UBNT_RS,		/* Ubiquiti RouterStation */
+ 	ATH79_MACH_UBNT_UAP_PRO,	/* Ubiquiti UniFi AP Pro */
  	ATH79_MACH_UBNT_UNIFI, 		/* Ubiquiti Unifi */
  	ATH79_MACH_UBNT_UNIFI_OUTDOOR,	/* Ubiquiti UnifiAP Outdoor */
  	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
@@ -662,9 +663,9 @@
 +	select ATH79_DEV_USB
 +
  config ATH79_MACH_UBNT_XM
- 	bool "Ubiquiti Networks XM (rev 1.0) board"
+ 	bool "Ubiquiti Networks XM/UniFi boards"
  	select SOC_AR724X
-@@ -80,6 +610,24 @@ config ATH79_MACH_UBNT_XM
+@@ -82,6 +612,24 @@ config ATH79_MACH_UBNT_XM
  	  Say 'Y' here if you want your kernel to support the
  	  Ubiquiti Networks XM (rev 1.0) board.
  
@@ -689,7 +690,7 @@
  endmenu
  
  config SOC_AR71XX
-@@ -115,10 +663,6 @@ config SOC_QCA955X
+@@ -117,10 +665,6 @@ config SOC_QCA955X
  	select PCI_AR724X if PCI
  	def_bool n
  
@@ -700,7 +701,7 @@
  config ATH79_DEV_AP9X_PCI
  	select ATH79_PCI_ATH9K_FIXUP
  	def_bool n
-@@ -129,7 +673,14 @@ config ATH79_DEV_DSA
+@@ -131,7 +675,14 @@ config ATH79_DEV_DSA
  config ATH79_DEV_ETH
  	def_bool n
  
@@ -716,7 +717,7 @@
  	def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -161,4 +712,7 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -163,4 +714,7 @@ config ATH79_PCI_ATH9K_FIXUP
  config ATH79_ROUTERBOOT
  	def_bool n
  
diff --git a/target/linux/ar71xx/patches-3.6/616-MIPS-ath79-WNDR4300-support.patch b/target/linux/ar71xx/patches-3.6/616-MIPS-ath79-WNDR4300-support.patch
index 40c9be3..055708b 100644
--- a/target/linux/ar71xx/patches-3.6/616-MIPS-ath79-WNDR4300-support.patch
+++ b/target/linux/ar71xx/patches-3.6/616-MIPS-ath79-WNDR4300-support.patch
@@ -20,7 +20,7 @@
  	select SOC_AR913X
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -106,6 +106,7 @@ enum ath79_mach_type {
+@@ -107,6 +107,7 @@ enum ath79_mach_type {
  	ATH79_MACH_WHR_HP_GN,		/* Buffalo WHR-HP-GN */
  	ATH79_MACH_WLAE_AG300N,		/* Buffalo WLAE-AG300N */
  	ATH79_MACH_WNDR3700,		/* NETGEAR WNDR3700/WNDR3800/WNDRMAC */