ar71xx: add support for 3.8

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35728

1 files changed, 128 insertions, 0 deletions

diff --git a/target/linux/ar71xx/patches-3.8/604-MIPS-ath79-ap81-fixes.patch b/target/linux/ar71xx/patches-3.8/604-MIPS-ath79-ap81-fixes.patch
new file mode 100644
index 0000000..3cc012d
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.8/604-MIPS-ath79-ap81-fixes.patch
@@ -0,0 +1,128 @@
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -9,12 +9,16 @@
+  *  by the Free Software Foundation.
+  */
+ 
+-#include "machtypes.h"
+-#include "dev-wmac.h"
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
+ #include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
+ 
+ #define AP81_GPIO_LED_STATUS	1
+ #define AP81_GPIO_LED_AOSS	3
+@@ -29,6 +33,37 @@
+ 
+ #define AP81_CAL_DATA_ADDR	0x1fff1000
+ 
++static struct mtd_partition ap81_partitions[] = {
++	{
++		.name		= "u-boot",
++		.offset		= 0,
++		.size		= 0x040000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "u-boot-env",
++		.offset		= 0x040000,
++		.size		= 0x010000,
++	}, {
++		.name		= "rootfs",
++		.offset		= 0x050000,
++		.size		= 0x500000,
++	}, {
++		.name		= "uImage",
++		.offset		= 0x550000,
++		.size		= 0x100000,
++	}, {
++		.name		= "ART",
++		.offset		= 0x650000,
++		.size		= 0x1b0000,
++		.mask_flags	= MTD_WRITEABLE,
++	}
++};
++
++static struct flash_platform_data ap81_flash_data = {
++	.parts		= ap81_partitions,
++	.nr_parts	= ARRAY_SIZE(ap81_partitions),
++};
++
+ static struct gpio_led ap81_leds_gpio[] __initdata = {
+ 	{
+ 		.name		= "ap81:green:status",
+@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio
+ 	}
+ };
+ 
+-static struct ath79_spi_controller_data ap81_spi0_data = {
+-	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+-	.cs_line = 0,
+-};
+-
+-static struct spi_board_info ap81_spi_info[] = {
+-	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "m25p64",
+-		.controller_data = &ap81_spi0_data,
+-	}
+-};
+-
+-static struct ath79_spi_platform_data ap81_spi_data = {
+-	.bus_num	= 0,
+-	.num_chipselect	= 1,
+-};
+-
+ static void __init ap81_setup(void)
+ {
+ 	u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
+@@ -96,10 +111,24 @@ static void __init ap81_setup(void)
+ 	ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
+ 					ARRAY_SIZE(ap81_gpio_keys),
+ 					ap81_gpio_keys);
+-	ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+-			   ARRAY_SIZE(ap81_spi_info));
++	ath79_register_m25p80(&ap81_flash_data);
+ 	ath79_register_wmac(cal_data, NULL);
+ 	ath79_register_usb();
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.has_ar8216 = 1;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = 0x10;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -30,9 +30,10 @@ config ATH79_MACH_AP136
+ config ATH79_MACH_AP81
+ 	bool "Atheros AP81 reference board"
+ 	select SOC_AR913X
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+ 	help