diff options
| author | Felix Fietkau <nbd@openwrt.org> | 2013-07-14 14:05:12 +0000 |
|---|---|---|
| committer | Felix Fietkau <nbd@openwrt.org> | 2013-07-14 14:05:12 +0000 |
| commit | 8d5d96e8338d436d6e46925932b687fa875a072a (patch) | |
| tree | 2f29408c0b63117563142f9aa9fb8e7c9fd88cf4 /target/linux/ar71xx/patches-3.8 | |
| parent | d1238718c23a818b1be2fca068974d8fb916a599 (diff) | |
| download | mtk-20170518-8d5d96e8338d436d6e46925932b687fa875a072a.zip mtk-20170518-8d5d96e8338d436d6e46925932b687fa875a072a.tar.gz mtk-20170518-8d5d96e8338d436d6e46925932b687fa875a072a.tar.bz2 | |
ar71xx: remove linux 3.8
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37290
Diffstat (limited to 'target/linux/ar71xx/patches-3.8')
108 files changed, 0 insertions, 11236 deletions
diff --git a/target/linux/ar71xx/patches-3.8/000-backport_ag71xx_phy_connect.patch b/target/linux/ar71xx/patches-3.8/000-backport_ag71xx_phy_connect.patch deleted file mode 100644 index ebc1442..0000000 --- a/target/linux/ar71xx/patches-3.8/000-backport_ag71xx_phy_connect.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c -+++ b/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c -@@ -131,7 +131,7 @@ static int ag71xx_phy_connect_multi(stru - } - - ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev), -- &ag71xx_phy_link_adjust, -+ &ag71xx_phy_link_adjust, 0, - pdata->phy_if_mode); - - if (IS_ERR(ag->phy_dev)) { diff --git a/target/linux/ar71xx/patches-3.8/001-spi-ath79-add-delay-between-SCK-changes.patch b/target/linux/ar71xx/patches-3.8/001-spi-ath79-add-delay-between-SCK-changes.patch deleted file mode 100644 index 9a10622..0000000 --- a/target/linux/ar71xx/patches-3.8/001-spi-ath79-add-delay-between-SCK-changes.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 486c150478777ef53cfef6f0d46840b9406b0612 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 27 Dec 2012 10:42:24 +0100 -Subject: [PATCH] spi/ath79: add delay between SCK changes - -commit 440114fdb13cbc53ea734bcc05b86bcf5b1e430c upstream. - -The driver uses the "as fast as it can" approach -to drive the SCK signal. However this does not -work with certain low speed SPI chips (e.g. the -PCF2123 RTC chip). - -The patch adds per-bit slowdowns in order to be -able to use the driver with such chips as well. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Signed-off-by: Grant Likely <grant.likely@secretlab.ca> ---- - drivers/spi/spi-ath79.c | 44 +++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 43 insertions(+), 1 deletion(-) - ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -24,17 +24,24 @@ - #include <linux/spi/spi_bitbang.h> - #include <linux/bitops.h> - #include <linux/gpio.h> -+#include <linux/clk.h> -+#include <linux/err.h> - - #include <asm/mach-ath79/ar71xx_regs.h> - #include <asm/mach-ath79/ath79_spi_platform.h> - - #define DRV_NAME "ath79-spi" - -+#define ATH79_SPI_RRW_DELAY_FACTOR 12000 -+#define MHZ (1000 * 1000) -+ - struct ath79_spi { - struct spi_bitbang bitbang; - u32 ioc_base; - u32 reg_ctrl; - void __iomem *base; -+ struct clk *clk; -+ unsigned rrw_delay; - }; - - static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg) -@@ -52,6 +59,12 @@ static inline struct ath79_spi *ath79_sp - return spi_master_get_devdata(spi->master); - } - -+static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs) -+{ -+ if (nsecs > sp->rrw_delay) -+ ndelay(nsecs - sp->rrw_delay); -+} -+ - static void ath79_spi_chipselect(struct spi_device *spi, int is_active) - { - struct ath79_spi *sp = ath79_spidev_to_sp(spi); -@@ -184,7 +197,9 @@ static u32 ath79_spi_txrx_mode0(struct s - - /* setup MSB (to slave) on trailing edge */ - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out); -+ ath79_spi_delay(sp, nsecs); - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK); -+ ath79_spi_delay(sp, nsecs); - - word <<= 1; - } -@@ -198,6 +213,7 @@ static int ath79_spi_probe(struct platfo - struct ath79_spi *sp; - struct ath79_spi_platform_data *pdata; - struct resource *r; -+ unsigned long rate; - int ret; - - master = spi_alloc_master(&pdev->dev, sizeof(*sp)); -@@ -236,12 +252,36 @@ static int ath79_spi_probe(struct platfo - goto err_put_master; - } - -+ sp->clk = clk_get(&pdev->dev, "ahb"); -+ if (IS_ERR(sp->clk)) { -+ ret = PTR_ERR(sp->clk); -+ goto err_unmap; -+ } -+ -+ ret = clk_enable(sp->clk); -+ if (ret) -+ goto err_clk_put; -+ -+ rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ); -+ if (!rate) { -+ ret = -EINVAL; -+ goto err_clk_disable; -+ } -+ -+ sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate; -+ dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n", -+ sp->rrw_delay); -+ - ret = spi_bitbang_start(&sp->bitbang); - if (ret) -- goto err_unmap; -+ goto err_clk_disable; - - return 0; - -+err_clk_disable: -+ clk_disable(sp->clk); -+err_clk_put: -+ clk_put(sp->clk); - err_unmap: - iounmap(sp->base); - err_put_master: -@@ -256,6 +296,8 @@ static int ath79_spi_remove(struct platf - struct ath79_spi *sp = platform_get_drvdata(pdev); - - spi_bitbang_stop(&sp->bitbang); -+ clk_disable(sp->clk); -+ clk_put(sp->clk); - iounmap(sp->base); - platform_set_drvdata(pdev, NULL); - spi_master_put(sp->bitbang.master); diff --git a/target/linux/ar71xx/patches-3.8/002-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch b/target/linux/ar71xx/patches-3.8/002-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch deleted file mode 100644 index 393ffa5..0000000 --- a/target/linux/ar71xx/patches-3.8/002-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch +++ /dev/null @@ -1,31 +0,0 @@ -From c7c943b1e3813ff5764ee6417a14530cb7cd6f57 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 27 Dec 2012 10:42:25 +0100 -Subject: [PATCH] spi/ath79: add missing HIGH->LOW SCK transition - -commit 72611db0eef21f4456d79ba302af4b34ea384f30 upstream. - -The 'ath79_spi_txrx_mode0' function does not -set the SCK signal to LOW at the end of a word -transfer. This causes communications errors with -certain devices (e.g. the PCF2123 RTC chip). - -The patch ensures that the SCK signal will be LOW. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Signed-off-by: Grant Likely <grant.likely@secretlab.ca> ---- - drivers/spi/spi-ath79.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -200,6 +200,8 @@ static u32 ath79_spi_txrx_mode0(struct s - ath79_spi_delay(sp, nsecs); - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK); - ath79_spi_delay(sp, nsecs); -+ if (bits == 1) -+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out); - - word <<= 1; - } diff --git a/target/linux/ar71xx/patches-3.8/003-spi-ath79-remove-superfluous-chip-select-code.patch b/target/linux/ar71xx/patches-3.8/003-spi-ath79-remove-superfluous-chip-select-code.patch deleted file mode 100644 index 58272bd..0000000 --- a/target/linux/ar71xx/patches-3.8/003-spi-ath79-remove-superfluous-chip-select-code.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 622d87da7f99b29dde053881bf42c46de7572ce5 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 27 Dec 2012 10:42:26 +0100 -Subject: [PATCH] spi/ath79: remove superfluous chip select code - -commit f1e8fc9898fd8ca78b7438d3c2e60028d3ae2a34 upstream. - -The spi_bitbang driver calls the chipselect function -of the driver from spi_bitbang_setup in order to -deselect the given SPI chip, so we don't have to -initialize the CS line here. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Signed-off-by: Grant Likely <grant.likely@secretlab.ca> ---- - drivers/spi/spi-ath79.c | 6 ------ - 1 file changed, 6 deletions(-) - ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -128,12 +128,6 @@ static int ath79_spi_setup_cs(struct spi - gpio_free(cdata->gpio); - return status; - } -- } else { -- if (spi->mode & SPI_CS_HIGH) -- sp->ioc_base |= AR71XX_SPI_IOC_CS0; -- else -- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; -- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); - } - - return 0; diff --git a/target/linux/ar71xx/patches-3.8/004-spi-ath79-use-gpio_request_one.patch b/target/linux/ar71xx/patches-3.8/004-spi-ath79-use-gpio_request_one.patch deleted file mode 100644 index ee81ecd..0000000 --- a/target/linux/ar71xx/patches-3.8/004-spi-ath79-use-gpio_request_one.patch +++ /dev/null @@ -1,59 +0,0 @@ -From f0b166c931c9971f2ae9614881565d23f58b3178 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 27 Dec 2012 10:42:27 +0100 -Subject: [PATCH] spi/ath79: use gpio_request_one - -commit 95d79419feffb326a3d5cb50e2248129dec06bb0 upstream. - -Use gpio_request_one() instead of multiple gpiolib calls. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Signed-off-by: Grant Likely <grant.likely@secretlab.ca> ---- - drivers/spi/spi-ath79.c | 22 +++++++++++----------- - 1 file changed, 11 insertions(+), 11 deletions(-) - ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -100,6 +100,7 @@ static int ath79_spi_setup_cs(struct spi - { - struct ath79_spi *sp = ath79_spidev_to_sp(spi); - struct ath79_spi_controller_data *cdata; -+ int status; - - cdata = spi->controller_data; - if (spi->chip_select && !cdata) -@@ -115,22 +116,21 @@ static int ath79_spi_setup_cs(struct spi - /* TODO: setup speed? */ - ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); - -+ status = 0; - if (spi->chip_select) { -- int status = 0; -+ unsigned long flags; - -- status = gpio_request(cdata->gpio, dev_name(&spi->dev)); -- if (status) -- return status; -- -- status = gpio_direction_output(cdata->gpio, -- spi->mode & SPI_CS_HIGH); -- if (status) { -- gpio_free(cdata->gpio); -- return status; -- } -+ flags = GPIOF_DIR_OUT; -+ if (spi->mode & SPI_CS_HIGH) -+ flags |= GPIOF_INIT_HIGH; -+ else -+ flags |= GPIOF_INIT_LOW; -+ -+ status = gpio_request_one(cdata->gpio, flags, -+ dev_name(&spi->dev)); - } - -- return 0; -+ return status; - } - - static void ath79_spi_cleanup_cs(struct spi_device *spi) diff --git a/target/linux/ar71xx/patches-3.8/005-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch b/target/linux/ar71xx/patches-3.8/005-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch deleted file mode 100644 index 8ad1dc3..0000000 --- a/target/linux/ar71xx/patches-3.8/005-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch +++ /dev/null @@ -1,112 +0,0 @@ -From d731c08cf1d264fd6113b9a97790c5a3a86ea520 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 27 Dec 2012 10:42:28 +0100 -Subject: [PATCH] spi/ath79: avoid multiple initialization of the SPI - controller - -commit c4a31f43005512b366e8bfc346e7f14c1a7a1ba7 upstream. - -Currently we are initializing the SPI controller in -the chip select line function, and that function is -called once for each SPI device on the bus. If a -board has multiple SPI devices, the controller will -be initialized multiple times. - -Introduce ath79_spi_{en,dis}able helper functions, -and call those from probe/response in order to avoid -the mutliple initialization of the controller. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Signed-off-by: Grant Likely <grant.likely@secretlab.ca> ---- - drivers/spi/spi-ath79.c | 41 ++++++++++++++++++++++++----------------- - 1 file changed, 24 insertions(+), 17 deletions(-) - ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -96,16 +96,8 @@ static void ath79_spi_chipselect(struct - - } - --static int ath79_spi_setup_cs(struct spi_device *spi) -+static void ath79_spi_enable(struct ath79_spi *sp) - { -- struct ath79_spi *sp = ath79_spidev_to_sp(spi); -- struct ath79_spi_controller_data *cdata; -- int status; -- -- cdata = spi->controller_data; -- if (spi->chip_select && !cdata) -- return -EINVAL; -- - /* enable GPIO mode */ - ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); - -@@ -115,6 +107,24 @@ static int ath79_spi_setup_cs(struct spi - - /* TODO: setup speed? */ - ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); -+} -+ -+static void ath79_spi_disable(struct ath79_spi *sp) -+{ -+ /* restore CTRL register */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl); -+ /* disable GPIO mode */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); -+} -+ -+static int ath79_spi_setup_cs(struct spi_device *spi) -+{ -+ struct ath79_spi_controller_data *cdata; -+ int status; -+ -+ cdata = spi->controller_data; -+ if (spi->chip_select && !cdata) -+ return -EINVAL; - - status = 0; - if (spi->chip_select) { -@@ -135,17 +145,10 @@ static int ath79_spi_setup_cs(struct spi - - static void ath79_spi_cleanup_cs(struct spi_device *spi) - { -- struct ath79_spi *sp = ath79_spidev_to_sp(spi); -- - if (spi->chip_select) { - struct ath79_spi_controller_data *cdata = spi->controller_data; - gpio_free(cdata->gpio); - } -- -- /* restore CTRL register */ -- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl); -- /* disable GPIO mode */ -- ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); - } - - static int ath79_spi_setup(struct spi_device *spi) -@@ -268,12 +271,15 @@ static int ath79_spi_probe(struct platfo - dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n", - sp->rrw_delay); - -+ ath79_spi_enable(sp); - ret = spi_bitbang_start(&sp->bitbang); - if (ret) -- goto err_clk_disable; -+ goto err_disable; - - return 0; - -+err_disable: -+ ath79_spi_disable(sp); - err_clk_disable: - clk_disable(sp->clk); - err_clk_put: -@@ -292,6 +298,7 @@ static int ath79_spi_remove(struct platf - struct ath79_spi *sp = platform_get_drvdata(pdev); - - spi_bitbang_stop(&sp->bitbang); -+ ath79_spi_disable(sp); - clk_disable(sp->clk); - clk_put(sp->clk); - iounmap(sp->base); diff --git a/target/linux/ar71xx/patches-3.8/006-spi-ath79-add-shutdown-handler.patch b/target/linux/ar71xx/patches-3.8/006-spi-ath79-add-shutdown-handler.patch deleted file mode 100644 index 6f59884..0000000 --- a/target/linux/ar71xx/patches-3.8/006-spi-ath79-add-shutdown-handler.patch +++ /dev/null @@ -1,54 +0,0 @@ -From a32b0e7851320cba0144d20e87e5326ee81e1063 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Tue, 5 Feb 2013 20:57:55 +0100 -Subject: [PATCH] spi/ath79: add shutdown handler - -commit 7410e848583f9120dd5f9414629f01bb76b5ee5f upstream. - -The SPI controller of the AR7xxx/AR9xxx SoCs -have a special mode which allows the SoC to -directly read data from SPI flash chips. In -this mode, the content of the SPI flash chip -can be accessed via a memory mapped region. - -During early init time, the kernel expects -that the flash chip is accessible through -that memory region because it reads board -specific values (e.g. MAC address, WiFi -calibration data) from the flash on various -boards. - -This is working if the kernel is loaded -directly by the bootloader because that -leaves the SPI controller in the special -mode. However it is not working in a kexec'd -kernel because the SPI driver does not restore -the special mode during shutdown. - -The patch adds a shutdown handler to fix this -issue. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Signed-off-by: Grant Likely <grant.likely@secretlab.ca> ---- - drivers/spi/spi-ath79.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -308,9 +308,15 @@ static int ath79_spi_remove(struct platf - return 0; - } - -+static void ath79_spi_shutdown(struct platform_device *pdev) -+{ -+ ath79_spi_remove(pdev); -+} -+ - static struct platform_driver ath79_spi_driver = { - .probe = ath79_spi_probe, - .remove = ath79_spi_remove, -+ .shutdown = ath79_spi_shutdown, - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, diff --git a/target/linux/ar71xx/patches-3.8/007-MIPS-ath79-fix-GPIO-function-selection-for-AR934x-So.patch b/target/linux/ar71xx/patches-3.8/007-MIPS-ath79-fix-GPIO-function-selection-for-AR934x-So.patch deleted file mode 100644 index c1f1247..0000000 --- a/target/linux/ar71xx/patches-3.8/007-MIPS-ath79-fix-GPIO-function-selection-for-AR934x-So.patch +++ /dev/null @@ -1,110 +0,0 @@ -From 2e6a41e0be6a09ed839e3afbe1fb413a015d8870 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Tue, 29 Jan 2013 08:19:12 +0000 -Subject: [PATCH] MIPS: ath79: fix GPIO function selection for AR934x SoCs - -commit 8838becdf5f7261d7f5dfbbe957fe9b9ed188aec upstream. - -GPIO function selection is not working on the AR934x -SoCs because the offset of the function selection -register is different on those. - -Add a helper routine which returns the correct -register address based on the SoC type, and use -that in the 'ath79_gpio_function_*' routines. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4870/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/gpio.c | 38 ++++++++++++++++-------- - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++ - 2 files changed, 28 insertions(+), 12 deletions(-) - ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -137,47 +137,61 @@ static struct gpio_chip ath79_gpio_chip - .base = 0, - }; - -+static void __iomem *ath79_gpio_get_function_reg(void) -+{ -+ u32 reg = 0; -+ -+ if (soc_is_ar71xx() || -+ soc_is_ar724x() || -+ soc_is_ar913x() || -+ soc_is_ar933x()) -+ reg = AR71XX_GPIO_REG_FUNC; -+ else if (soc_is_ar934x()) -+ reg = AR934X_GPIO_REG_FUNC; -+ else -+ BUG(); -+ -+ return ath79_gpio_base + reg; -+} -+ - void ath79_gpio_function_enable(u32 mask) - { -- void __iomem *base = ath79_gpio_base; -+ void __iomem *reg = ath79_gpio_get_function_reg(); - unsigned long flags; - - spin_lock_irqsave(&ath79_gpio_lock, flags); - -- __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) | mask, -- base + AR71XX_GPIO_REG_FUNC); -+ __raw_writel(__raw_readl(reg) | mask, reg); - /* flush write */ -- __raw_readl(base + AR71XX_GPIO_REG_FUNC); -+ __raw_readl(reg); - - spin_unlock_irqrestore(&ath79_gpio_lock, flags); - } - - void ath79_gpio_function_disable(u32 mask) - { -- void __iomem *base = ath79_gpio_base; -+ void __iomem *reg = ath79_gpio_get_function_reg(); - unsigned long flags; - - spin_lock_irqsave(&ath79_gpio_lock, flags); - -- __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~mask, -- base + AR71XX_GPIO_REG_FUNC); -+ __raw_writel(__raw_readl(reg) & ~mask, reg); - /* flush write */ -- __raw_readl(base + AR71XX_GPIO_REG_FUNC); -+ __raw_readl(reg); - - spin_unlock_irqrestore(&ath79_gpio_lock, flags); - } - - void ath79_gpio_function_setup(u32 set, u32 clear) - { -- void __iomem *base = ath79_gpio_base; -+ void __iomem *reg = ath79_gpio_get_function_reg(); - unsigned long flags; - - spin_lock_irqsave(&ath79_gpio_lock, flags); - -- __raw_writel((__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~clear) | set, -- base + AR71XX_GPIO_REG_FUNC); -+ __raw_writel((__raw_readl(reg) & ~clear) | set, reg); - /* flush write */ -- __raw_readl(base + AR71XX_GPIO_REG_FUNC); -+ __raw_readl(reg); - - spin_unlock_irqrestore(&ath79_gpio_lock, flags); - } ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -401,6 +401,8 @@ - #define AR71XX_GPIO_REG_INT_ENABLE 0x24 - #define AR71XX_GPIO_REG_FUNC 0x28 - -+#define AR934X_GPIO_REG_FUNC 0x6c -+ - #define AR71XX_GPIO_COUNT 16 - #define AR7240_GPIO_COUNT 18 - #define AR7241_GPIO_COUNT 20 diff --git a/target/linux/ar71xx/patches-3.8/008-MIPS-ath79-simplify-ath79_gpio_function_-routines.patch b/target/linux/ar71xx/patches-3.8/008-MIPS-ath79-simplify-ath79_gpio_function_-routines.patch deleted file mode 100644 index 8606f3b..0000000 --- a/target/linux/ar71xx/patches-3.8/008-MIPS-ath79-simplify-ath79_gpio_function_-routines.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 6c888a88f2a9939182bf41151f079a6b59f1593c Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Tue, 29 Jan 2013 08:19:13 +0000 -Subject: [PATCH] MIPS: ath79: simplify ath79_gpio_function_* routines - -commit f160a289e0e8848391f5ec48ff1a014b9c04b162 upstream. - -Make ath79_gpio_function_{en,dis}able to be wrappers -around ath79_gpio_function_setup. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4871/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/gpio.c | 30 ++++++------------------------ - 1 file changed, 6 insertions(+), 24 deletions(-) - ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -154,46 +154,28 @@ static void __iomem *ath79_gpio_get_func - return ath79_gpio_base + reg; - } - --void ath79_gpio_function_enable(u32 mask) -+void ath79_gpio_function_setup(u32 set, u32 clear) - { - void __iomem *reg = ath79_gpio_get_function_reg(); - unsigned long flags; - - spin_lock_irqsave(&ath79_gpio_lock, flags); - -- __raw_writel(__raw_readl(reg) | mask, reg); -+ __raw_writel((__raw_readl(reg) & ~clear) | set, reg); - /* flush write */ - __raw_readl(reg); - - spin_unlock_irqrestore(&ath79_gpio_lock, flags); - } - --void ath79_gpio_function_disable(u32 mask) -+void ath79_gpio_function_enable(u32 mask) - { -- void __iomem *reg = ath79_gpio_get_function_reg(); -- unsigned long flags; -- -- spin_lock_irqsave(&ath79_gpio_lock, flags); -- -- __raw_writel(__raw_readl(reg) & ~mask, reg); -- /* flush write */ -- __raw_readl(reg); -- -- spin_unlock_irqrestore(&ath79_gpio_lock, flags); -+ ath79_gpio_function_setup(mask, 0); - } - --void ath79_gpio_function_setup(u32 set, u32 clear) -+void ath79_gpio_function_disable(u32 mask) - { -- void __iomem *reg = ath79_gpio_get_function_reg(); -- unsigned long flags; -- -- spin_lock_irqsave(&ath79_gpio_lock, flags); -- -- __raw_writel((__raw_readl(reg) & ~clear) | set, reg); -- /* flush write */ -- __raw_readl(reg); -- -- spin_unlock_irqrestore(&ath79_gpio_lock, flags); -+ ath79_gpio_function_setup(0, mask); - } - - void __init ath79_gpio_init(void) diff --git a/target/linux/ar71xx/patches-3.8/009-MIPS-ath79-simplify-MISC-IRQ-handling.patch b/target/linux/ar71xx/patches-3.8/009-MIPS-ath79-simplify-MISC-IRQ-handling.patch deleted file mode 100644 index 146bf25..0000000 --- a/target/linux/ar71xx/patches-3.8/009-MIPS-ath79-simplify-MISC-IRQ-handling.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 1690e8f8efdeedbd23bb34a3bc5803c34f2d3f66 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Tue, 29 Jan 2013 16:13:17 +0000 -Subject: [PATCH] MIPS: ath79: simplify MISC IRQ handling - -commit 9c099c4e79b67d5578ce8142e6214950be4fcf43 upstream. - -The current code uses multiple if statements for -demultiplexing the different interrupt sources. -Additionally, the MISC interrupt controller has -32 interrupt sources and the current code does not -handles all of them. - -Get rid of the if statements and process all interrupt -sources in a loop to fix these issues. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4874/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/irq.c | 45 +++++++------------------------- - arch/mips/include/asm/mach-ath79/irq.h | 1 + - 2 files changed, 10 insertions(+), 36 deletions(-) - ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -35,44 +35,17 @@ static void ath79_misc_irq_handler(unsig - pending = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS) & - __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); - -- if (pending & MISC_INT_UART) -- generic_handle_irq(ATH79_MISC_IRQ_UART); -- -- else if (pending & MISC_INT_DMA) -- generic_handle_irq(ATH79_MISC_IRQ_DMA); -- -- else if (pending & MISC_INT_PERFC) -- generic_handle_irq(ATH79_MISC_IRQ_PERFC); -- -- else if (pending & MISC_INT_TIMER) -- generic_handle_irq(ATH79_MISC_IRQ_TIMER); -- -- else if (pending & MISC_INT_TIMER2) -- generic_handle_irq(ATH79_MISC_IRQ_TIMER2); -- -- else if (pending & MISC_INT_TIMER3) -- generic_handle_irq(ATH79_MISC_IRQ_TIMER3); -- -- else if (pending & MISC_INT_TIMER4) -- generic_handle_irq(ATH79_MISC_IRQ_TIMER4); -- -- else if (pending & MISC_INT_OHCI) -- generic_handle_irq(ATH79_MISC_IRQ_OHCI); -- -- else if (pending & MISC_INT_ERROR) -- generic_handle_irq(ATH79_MISC_IRQ_ERROR); -- -- else if (pending & MISC_INT_GPIO) -- generic_handle_irq(ATH79_MISC_IRQ_GPIO); -- -- else if (pending & MISC_INT_WDOG) -- generic_handle_irq(ATH79_MISC_IRQ_WDOG); -+ if (!pending) { -+ spurious_interrupt(); -+ return; -+ } - -- else if (pending & MISC_INT_ETHSW) -- generic_handle_irq(ATH79_MISC_IRQ_ETHSW); -+ while (pending) { -+ int bit = __ffs(pending); - -- else -- spurious_interrupt(); -+ generic_handle_irq(ATH79_MISC_IRQ(bit)); -+ pending &= ~BIT(bit); -+ } - } - - static void ar71xx_misc_irq_unmask(struct irq_data *d) ---- a/arch/mips/include/asm/mach-ath79/irq.h -+++ b/arch/mips/include/asm/mach-ath79/irq.h -@@ -14,6 +14,7 @@ - - #define ATH79_MISC_IRQ_BASE 8 - #define ATH79_MISC_IRQ_COUNT 32 -+#define ATH79_MISC_IRQ(_x) (ATH79_MISC_IRQ_BASE + (_x)) - - #define ATH79_PCI_IRQ_BASE (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT) - #define ATH79_PCI_IRQ_COUNT 6 diff --git a/target/linux/ar71xx/patches-3.8/010-MIPS-pci-ar724x-convert-into-a-platform-driver.patch b/target/linux/ar71xx/patches-3.8/010-MIPS-pci-ar724x-convert-into-a-platform-driver.patch deleted file mode 100644 index e7b7b15..0000000 --- a/target/linux/ar71xx/patches-3.8/010-MIPS-pci-ar724x-convert-into-a-platform-driver.patch +++ /dev/null @@ -1,102 +0,0 @@ -From 42541838d9fdbad8573141d69cf8e38831a6cbb6 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sat, 2 Feb 2013 11:40:42 +0000 -Subject: [PATCH] MIPS: pci-ar724x: convert into a platform driver - -commit 58d2e9bcd682d76bcb9575dc56c85f1d82a81bfa upstream. - -The patch converts the pci-ar724x driver into a -platform driver. This makes it possible to register -the PCI controller as a plain platform device. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4905/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/pci/pci-ar724x.c | 57 ++++++++++++++++++++++++++++++++++++++++++-- - 1 file changed, 55 insertions(+), 2 deletions(-) - ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -11,6 +11,8 @@ - - #include <linux/irq.h> - #include <linux/pci.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/ar71xx_regs.h> - #include <asm/mach-ath79/pci.h> -@@ -262,7 +264,7 @@ static struct irq_chip ar724x_pci_irq_ch - .irq_mask_ack = ar724x_pci_irq_mask, - }; - --static void __init ar724x_pci_irq_init(int irq) -+static void ar724x_pci_irq_init(int irq) - { - void __iomem *base; - int i; -@@ -282,7 +284,7 @@ static void __init ar724x_pci_irq_init(i - irq_set_chained_handler(irq, ar724x_pci_irq_handler); - } - --int __init ar724x_pcibios_init(int irq) -+int ar724x_pcibios_init(int irq) - { - int ret; - -@@ -312,3 +314,54 @@ err_unmap_devcfg: - err: - return ret; - } -+ -+static int ar724x_pci_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ int irq; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base"); -+ if (!res) -+ return -EINVAL; -+ -+ ar724x_pci_ctrl_base = devm_request_and_ioremap(&pdev->dev, res); -+ if (ar724x_pci_ctrl_base == NULL) -+ return -EBUSY; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base"); -+ if (!res) -+ return -EINVAL; -+ -+ ar724x_pci_devcfg_base = devm_request_and_ioremap(&pdev->dev, res); -+ if (!ar724x_pci_devcfg_base) -+ return -EBUSY; -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) -+ return -EINVAL; -+ -+ ar724x_pci_link_up = ar724x_pci_check_link(); -+ if (!ar724x_pci_link_up) -+ dev_warn(&pdev->dev, "PCIe link is down\n"); -+ -+ ar724x_pci_irq_init(irq); -+ -+ register_pci_controller(&ar724x_pci_controller); -+ -+ return 0; -+} -+ -+static struct platform_driver ar724x_pci_driver = { -+ .probe = ar724x_pci_probe, -+ .driver = { -+ .name = "ar724x-pci", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init ar724x_pci_init(void) -+{ -+ return platform_driver_register(&ar724x_pci_driver); -+} -+ -+postcore_initcall(ar724x_pci_init); diff --git a/target/linux/ar71xx/patches-3.8/011-MIPS-pci-ar71xx-convert-into-a-platform-driver.patch b/target/linux/ar71xx/patches-3.8/011-MIPS-pci-ar71xx-convert-into-a-platform-driver.patch deleted file mode 100644 index e6bd8d0..0000000 --- a/target/linux/ar71xx/patches-3.8/011-MIPS-pci-ar71xx-convert-into-a-platform-driver.patch +++ /dev/null @@ -1,112 +0,0 @@ -From 060c9a226a25e044167e877d9830ec53f836da9e Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sat, 2 Feb 2013 11:40:43 +0000 -Subject: [PATCH] MIPS: pci-ar71xx: convert into a platform driver - -commit fb167e891d5cc6386840dd092af2d461b38eb802 upstream. - -The patch converts the pci-ar71xx driver into a -platform driver. This makes it possible to register -the PCI controller as a plain platform device. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4906/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/pci/pci-ar71xx.c | 60 +++++++++++++++++++++++++++++++++++++++++--- - 1 file changed, 56 insertions(+), 4 deletions(-) - ---- a/arch/mips/pci/pci-ar71xx.c -+++ b/arch/mips/pci/pci-ar71xx.c -@@ -18,6 +18,8 @@ - #include <linux/pci.h> - #include <linux/pci_regs.h> - #include <linux/interrupt.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> - - #include <asm/mach-ath79/ar71xx_regs.h> - #include <asm/mach-ath79/ath79.h> -@@ -309,7 +311,7 @@ static struct irq_chip ar71xx_pci_irq_ch - .irq_mask_ack = ar71xx_pci_irq_mask, - }; - --static __init void ar71xx_pci_irq_init(void) -+static void ar71xx_pci_irq_init(int irq) - { - void __iomem *base = ath79_reset_base; - int i; -@@ -324,10 +326,10 @@ static __init void ar71xx_pci_irq_init(v - irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, - handle_level_irq); - -- irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar71xx_pci_irq_handler); -+ irq_set_chained_handler(irq, ar71xx_pci_irq_handler); - } - --static __init void ar71xx_pci_reset(void) -+static void ar71xx_pci_reset(void) - { - void __iomem *ddr_base = ath79_ddr_base; - -@@ -367,9 +369,59 @@ __init int ar71xx_pcibios_init(void) - /* clear bus errors */ - ar71xx_pci_check_error(1); - -- ar71xx_pci_irq_init(); -+ ar71xx_pci_irq_init(ATH79_CPU_IRQ_IP2); - - register_pci_controller(&ar71xx_pci_controller); - - return 0; - } -+ -+static int ar71xx_pci_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ int irq; -+ u32 t; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base"); -+ if (!res) -+ return -EINVAL; -+ -+ ar71xx_pcicfg_base = devm_request_and_ioremap(&pdev->dev, res); -+ if (!ar71xx_pcicfg_base) -+ return -ENOMEM; -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) -+ return -EINVAL; -+ -+ ar71xx_pci_reset(); -+ -+ /* setup COMMAND register */ -+ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE -+ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK; -+ ar71xx_pci_local_write(PCI_COMMAND, 4, t); -+ -+ /* clear bus errors */ -+ ar71xx_pci_check_error(1); -+ -+ ar71xx_pci_irq_init(irq); -+ -+ register_pci_controller(&ar71xx_pci_controller); -+ -+ return 0; -+} -+ -+static struct platform_driver ar71xx_pci_driver = { -+ .probe = ar71xx_pci_probe, -+ .driver = { -+ .name = "ar71xx-pci", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init ar71xx_pci_init(void) -+{ -+ return platform_driver_register(&ar71xx_pci_driver); -+} -+ -+postcore_initcall(ar71xx_pci_init); diff --git a/target/linux/ar71xx/patches-3.8/012-MIPS-ath79-move-global-PCI-defines-into-a-common-hea.patch b/target/linux/ar71xx/patches-3.8/012-MIPS-ath79-move-global-PCI-defines-into-a-common-hea.patch deleted file mode 100644 index eaff04b..0000000 --- a/target/linux/ar71xx/patches-3.8/012-MIPS-ath79-move-global-PCI-defines-into-a-common-hea.patch +++ /dev/null @@ -1,98 +0,0 @@ -From 1dece618b107f5db28c8f63d4d32424dd18324d1 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Mon, 4 Feb 2013 11:56:53 +0100 -Subject: [PATCH] MIPS: ath79: move global PCI defines into a common header - -commit ad4ce92e919f7ad5561a2060deb58899de58b40c upstream. - -The constants will be used by a subsequent patch. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4907/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 24 ++++++++++++++++++++++++ - arch/mips/pci/pci-ar71xx.c | 16 ---------------- - arch/mips/pci/pci-ar724x.c | 8 -------- - 3 files changed, 24 insertions(+), 24 deletions(-) - ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -41,11 +41,35 @@ - #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) - #define AR71XX_RESET_SIZE 0x100 - -+#define AR71XX_PCI_MEM_BASE 0x10000000 -+#define AR71XX_PCI_MEM_SIZE 0x07000000 -+ -+#define AR71XX_PCI_WIN0_OFFS 0x10000000 -+#define AR71XX_PCI_WIN1_OFFS 0x11000000 -+#define AR71XX_PCI_WIN2_OFFS 0x12000000 -+#define AR71XX_PCI_WIN3_OFFS 0x13000000 -+#define AR71XX_PCI_WIN4_OFFS 0x14000000 -+#define AR71XX_PCI_WIN5_OFFS 0x15000000 -+#define AR71XX_PCI_WIN6_OFFS 0x16000000 -+#define AR71XX_PCI_WIN7_OFFS 0x07000000 -+ -+#define AR71XX_PCI_CFG_BASE \ -+ (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000) -+#define AR71XX_PCI_CFG_SIZE 0x100 -+ - #define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) - #define AR7240_USB_CTRL_SIZE 0x100 - #define AR7240_OHCI_BASE 0x1b000000 - #define AR7240_OHCI_SIZE 0x1000 - -+#define AR724X_PCI_MEM_BASE 0x10000000 -+#define AR724X_PCI_MEM_SIZE 0x04000000 -+ -+#define AR724X_PCI_CFG_BASE 0x14000000 -+#define AR724X_PCI_CFG_SIZE 0x1000 -+#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000) -+#define AR724X_PCI_CTRL_SIZE 0x100 -+ - #define AR724X_EHCI_BASE 0x1b000000 - #define AR724X_EHCI_SIZE 0x1000 - ---- a/arch/mips/pci/pci-ar71xx.c -+++ b/arch/mips/pci/pci-ar71xx.c -@@ -25,22 +25,6 @@ - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/pci.h> - --#define AR71XX_PCI_MEM_BASE 0x10000000 --#define AR71XX_PCI_MEM_SIZE 0x07000000 -- --#define AR71XX_PCI_WIN0_OFFS 0x10000000 --#define AR71XX_PCI_WIN1_OFFS 0x11000000 --#define AR71XX_PCI_WIN2_OFFS 0x12000000 --#define AR71XX_PCI_WIN3_OFFS 0x13000000 --#define AR71XX_PCI_WIN4_OFFS 0x14000000 --#define AR71XX_PCI_WIN5_OFFS 0x15000000 --#define AR71XX_PCI_WIN6_OFFS 0x16000000 --#define AR71XX_PCI_WIN7_OFFS 0x07000000 -- --#define AR71XX_PCI_CFG_BASE \ -- (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000) --#define AR71XX_PCI_CFG_SIZE 0x100 -- - #define AR71XX_PCI_REG_CRP_AD_CBE 0x00 - #define AR71XX_PCI_REG_CRP_WRDATA 0x04 - #define AR71XX_PCI_REG_CRP_RDDATA 0x08 ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -17,14 +17,6 @@ - #include <asm/mach-ath79/ar71xx_regs.h> - #include <asm/mach-ath79/pci.h> - --#define AR724X_PCI_CFG_BASE 0x14000000 --#define AR724X_PCI_CFG_SIZE 0x1000 --#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000) --#define AR724X_PCI_CTRL_SIZE 0x100 -- --#define AR724X_PCI_MEM_BASE 0x10000000 --#define AR724X_PCI_MEM_SIZE 0x04000000 -- - #define AR724X_PCI_REG_RESET 0x18 - #define AR724X_PCI_REG_INT_STATUS 0x4c - #define AR724X_PCI_REG_INT_MASK 0x50 diff --git a/target/linux/ar71xx/patches-3.8/013-MIPS-ath79-register-platform-devices-for-the-PCI-con.patch b/target/linux/ar71xx/patches-3.8/013-MIPS-ath79-register-platform-devices-for-the-PCI-con.patch deleted file mode 100644 index eee791e..0000000 --- a/target/linux/ar71xx/patches-3.8/013-MIPS-ath79-register-platform-devices-for-the-PCI-con.patch +++ /dev/null @@ -1,129 +0,0 @@ -From 87cdbe4315e4c72c2bc8568d1258e1207e1c772b Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sat, 2 Feb 2013 11:44:24 +0000 -Subject: [PATCH] MIPS: ath79: register platform devices for the PCI - controllers - -commit 9fc1ca5b73a82daedffa2d1d5daa48dd2093c39a upstream. - -The pci-ar71xx and pci-ar724x drivers were converted -into platform drivers. Register the corresponding -platform devices for the PCI controllers instead -of using the ar7{1x,24}x_pcibios_init functions. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4908/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/pci.c | 87 ++++++++++++++++++++++++++++++++++++++++++++----- - 1 file changed, 78 insertions(+), 9 deletions(-) - ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -14,6 +14,8 @@ - - #include <linux/init.h> - #include <linux/pci.h> -+#include <linux/resource.h> -+#include <linux/platform_device.h> - #include <asm/mach-ath79/ar71xx_regs.h> - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/irq.h> -@@ -110,21 +112,88 @@ void __init ath79_pci_set_plat_dev_init( - ath79_pci_plat_dev_init = func; - } - --int __init ath79_register_pci(void) -+static struct platform_device * -+ath79_register_pci_ar71xx(void) - { -- if (soc_is_ar71xx()) -- return ar71xx_pcibios_init(); -+ struct platform_device *pdev; -+ struct resource res[2]; -+ -+ memset(res, 0, sizeof(res)); - -- if (soc_is_ar724x()) -- return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2); -+ res[0].name = "cfg_base"; -+ res[0].flags = IORESOURCE_MEM; -+ res[0].start = AR71XX_PCI_CFG_BASE; -+ res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1; -+ -+ res[1].flags = IORESOURCE_IRQ; -+ res[1].start = ATH79_CPU_IRQ_IP2; -+ res[1].end = ATH79_CPU_IRQ_IP2; -+ -+ pdev = platform_device_register_simple("ar71xx-pci", -1, -+ res, ARRAY_SIZE(res)); -+ return pdev; -+} - -- if (soc_is_ar9342() || soc_is_ar9344()) { -+static struct platform_device * -+ath79_register_pci_ar724x(int id, -+ unsigned long cfg_base, -+ unsigned long ctrl_base, -+ int irq) -+{ -+ struct platform_device *pdev; -+ struct resource res[3]; -+ -+ memset(res, 0, sizeof(res)); -+ -+ res[0].name = "cfg_base"; -+ res[0].flags = IORESOURCE_MEM; -+ res[0].start = cfg_base; -+ res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1; -+ -+ res[1].name = "ctrl_base"; -+ res[1].flags = IORESOURCE_MEM; -+ res[1].start = ctrl_base; -+ res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1; -+ -+ res[2].flags = IORESOURCE_IRQ; -+ res[2].start = irq; -+ res[2].end = irq; -+ -+ pdev = platform_device_register_simple("ar724x-pci", id, -+ res, ARRAY_SIZE(res)); -+ return pdev; -+} -+ -+int __init ath79_register_pci(void) -+{ -+ struct platform_device *pdev = NULL; -+ -+ if (soc_is_ar71xx()) { -+ pdev = ath79_register_pci_ar71xx(); -+ } else if (soc_is_ar724x()) { -+ pdev = ath79_register_pci_ar724x(-1, -+ AR724X_PCI_CFG_BASE, -+ AR724X_PCI_CTRL_BASE, -+ ATH79_CPU_IRQ_IP2); -+ } else if (soc_is_ar9342() || -+ soc_is_ar9344()) { - u32 bootstrap; - - bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); -- if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC) -- return ar724x_pcibios_init(ATH79_IP2_IRQ(0)); -+ if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0) -+ return -ENODEV; -+ -+ pdev = ath79_register_pci_ar724x(-1, -+ AR724X_PCI_CFG_BASE, -+ AR724X_PCI_CTRL_BASE, -+ ATH79_IP2_IRQ(0)); -+ } else { -+ /* No PCI support */ -+ return -ENODEV; - } - -- return -ENODEV; -+ if (!pdev) -+ pr_err("unable to register PCI controller device\n"); -+ -+ return pdev ? 0 : -ENODEV; - } diff --git a/target/linux/ar71xx/patches-3.8/014-MIPS-ath79-remove-unused-ar7-1x-24-x_pcibios_init-fu.patch b/target/linux/ar71xx/patches-3.8/014-MIPS-ath79-remove-unused-ar7-1x-24-x_pcibios_init-fu.patch deleted file mode 100644 index 978a33d..0000000 --- a/target/linux/ar71xx/patches-3.8/014-MIPS-ath79-remove-unused-ar7-1x-24-x_pcibios_init-fu.patch +++ /dev/null @@ -1,152 +0,0 @@ -From db36c9d6a6be232bdee245407fc8ccde53ea69c6 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Mon, 4 Feb 2013 11:58:49 +0100 -Subject: [PATCH] MIPS: ath79: remove unused ar7{1x,24}x_pcibios_init - functions - -commit 6e783865b4e60f2ecf7708f8ea24db5c5ea07ced upstream. - -The functions are unused now, so remove them. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4909/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/pci.c | 1 - - arch/mips/include/asm/mach-ath79/pci.h | 28 ---------------------------- - arch/mips/pci/pci-ar71xx.c | 26 -------------------------- - arch/mips/pci/pci-ar724x.c | 32 -------------------------------- - 4 files changed, 87 deletions(-) - delete mode 100644 arch/mips/include/asm/mach-ath79/pci.h - ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -19,7 +19,6 @@ - #include <asm/mach-ath79/ar71xx_regs.h> - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/irq.h> --#include <asm/mach-ath79/pci.h> - #include "pci.h" - - static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev); ---- a/arch/mips/include/asm/mach-ath79/pci.h -+++ /dev/null -@@ -1,28 +0,0 @@ --/* -- * Atheros AR71XX/AR724X PCI support -- * -- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> -- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> -- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -- * -- * This program is free software; you can redistribute it and/or modify it -- * under the terms of the GNU General Public License version 2 as published -- * by the Free Software Foundation. -- */ -- --#ifndef __ASM_MACH_ATH79_PCI_H --#define __ASM_MACH_ATH79_PCI_H -- --#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX) --int ar71xx_pcibios_init(void); --#else --static inline int ar71xx_pcibios_init(void) { return 0; } --#endif -- --#if defined(CONFIG_PCI_AR724X) --int ar724x_pcibios_init(int irq); --#else --static inline int ar724x_pcibios_init(int irq) { return 0; } --#endif -- --#endif /* __ASM_MACH_ATH79_PCI_H */ ---- a/arch/mips/pci/pci-ar71xx.c -+++ b/arch/mips/pci/pci-ar71xx.c -@@ -23,7 +23,6 @@ - - #include <asm/mach-ath79/ar71xx_regs.h> - #include <asm/mach-ath79/ath79.h> --#include <asm/mach-ath79/pci.h> - - #define AR71XX_PCI_REG_CRP_AD_CBE 0x00 - #define AR71XX_PCI_REG_CRP_WRDATA 0x04 -@@ -335,31 +334,6 @@ static void ar71xx_pci_reset(void) - mdelay(100); - } - --__init int ar71xx_pcibios_init(void) --{ -- u32 t; -- -- ar71xx_pcicfg_base = ioremap(AR71XX_PCI_CFG_BASE, AR71XX_PCI_CFG_SIZE); -- if (ar71xx_pcicfg_base == NULL) -- return -ENOMEM; -- -- ar71xx_pci_reset(); -- -- /* setup COMMAND register */ -- t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE -- | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK; -- ar71xx_pci_local_write(PCI_COMMAND, 4, t); -- -- /* clear bus errors */ -- ar71xx_pci_check_error(1); -- -- ar71xx_pci_irq_init(ATH79_CPU_IRQ_IP2); -- -- register_pci_controller(&ar71xx_pci_controller); -- -- return 0; --} -- - static int ar71xx_pci_probe(struct platform_device *pdev) - { - struct resource *res; ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -15,7 +15,6 @@ - #include <linux/platform_device.h> - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/ar71xx_regs.h> --#include <asm/mach-ath79/pci.h> - - #define AR724X_PCI_REG_RESET 0x18 - #define AR724X_PCI_REG_INT_STATUS 0x4c -@@ -276,37 +275,6 @@ static void ar724x_pci_irq_init(int irq) - irq_set_chained_handler(irq, ar724x_pci_irq_handler); - } - --int ar724x_pcibios_init(int irq) --{ -- int ret; -- -- ret = -ENOMEM; -- -- ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE, -- AR724X_PCI_CFG_SIZE); -- if (ar724x_pci_devcfg_base == NULL) -- goto err; -- -- ar724x_pci_ctrl_base = ioremap(AR724X_PCI_CTRL_BASE, -- AR724X_PCI_CTRL_SIZE); -- if (ar724x_pci_ctrl_base == NULL) -- goto err_unmap_devcfg; -- -- ar724x_pci_link_up = ar724x_pci_check_link(); -- if (!ar724x_pci_link_up) -- pr_warn("ar724x: PCIe link is down\n"); -- -- ar724x_pci_irq_init(irq); -- register_pci_controller(&ar724x_pci_controller); -- -- return PCIBIOS_SUCCESSFUL; -- --err_unmap_devcfg: -- iounmap(ar724x_pci_devcfg_base); --err: -- return ret; --} -- - static int ar724x_pci_probe(struct platform_device *pdev) - { - struct resource *res; diff --git a/target/linux/ar71xx/patches-3.8/015-MIPS-avoid-possible-resource-conflict-in-register_pc.patch b/target/linux/ar71xx/patches-3.8/015-MIPS-avoid-possible-resource-conflict-in-register_pc.patch deleted file mode 100644 index fd62f5c..0000000 --- a/target/linux/ar71xx/patches-3.8/015-MIPS-avoid-possible-resource-conflict-in-register_pc.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 4da85831c8eaf2de2cadae6723e8231068c313b7 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sat, 2 Feb 2013 13:18:54 +0000 -Subject: [PATCH] MIPS: avoid possible resource conflict in - register_pci_controller - -commit 222831787704c9ad9215f6b56f975b233968607c upstream. - -The IO and memory resources of a PCI controller -might already have a parent resource set when -they are passed to 'register_pci_controller'. - -If the parent resource is set, the request_resource -call will fail due to resource conflict and the -current code will not be able to register the -PCI controller. - -Use the parent resource if it is available in the -request_resource call to avoid the isssue. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4910/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/pci/pci.c | 15 +++++++++++++-- - 1 file changed, 13 insertions(+), 2 deletions(-) - ---- a/arch/mips/pci/pci.c -+++ b/arch/mips/pci/pci.c -@@ -181,9 +181,20 @@ static DEFINE_MUTEX(pci_scan_mutex); - - void register_pci_controller(struct pci_controller *hose) - { -- if (request_resource(&iomem_resource, hose->mem_resource) < 0) -+ struct resource *parent; -+ -+ parent = hose->mem_resource->parent; -+ if (!parent) -+ parent = &iomem_resource; -+ -+ if (request_resource(parent, hose->mem_resource) < 0) - goto out; -- if (request_resource(&ioport_resource, hose->io_resource) < 0) { -+ -+ parent = hose->io_resource->parent; -+ if (!parent) -+ parent = &ioport_resource; -+ -+ if (request_resource(parent, hose->io_resource) < 0) { - release_resource(hose->mem_resource); - goto out; - } diff --git a/target/linux/ar71xx/patches-3.8/016-MIPS-ath79-allow-to-specify-bus-number-in-PCI-IRQ-ma.patch b/target/linux/ar71xx/patches-3.8/016-MIPS-ath79-allow-to-specify-bus-number-in-PCI-IRQ-ma.patch deleted file mode 100644 index 477bddb..0000000 --- a/target/linux/ar71xx/patches-3.8/016-MIPS-ath79-allow-to-specify-bus-number-in-PCI-IRQ-ma.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 53ba4919664636487155c810fb49781169780e0c Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 3 Feb 2013 09:58:37 +0000 -Subject: [PATCH] MIPS: ath79: allow to specify bus number in PCI IRQ maps - -commit 617fed41e98417f3ea3e9974be251e125c8796f2 upstream. - -This is needed for multiple PCI bus support. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4913/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/pci.c | 4 +++- - arch/mips/ath79/pci.h | 1 + - 2 files changed, 4 insertions(+), 1 deletion(-) - ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -75,7 +75,9 @@ int __init pcibios_map_irq(const struct - const struct ath79_pci_irq *entry; - - entry = &ath79_pci_irq_map[i]; -- if (entry->slot == slot && entry->pin == pin) { -+ if (entry->bus == dev->bus->number && -+ entry->slot == slot && -+ entry->pin == pin) { - irq = entry->irq; - break; - } ---- a/arch/mips/ath79/pci.h -+++ b/arch/mips/ath79/pci.h -@@ -14,6 +14,7 @@ - #define _ATH79_PCI_H - - struct ath79_pci_irq { -+ int bus; - u8 slot; - u8 pin; - int irq; diff --git a/target/linux/ar71xx/patches-3.8/017-MIPS-pci-ar724x-use-dynamically-allocated-PCI-contro.patch b/target/linux/ar71xx/patches-3.8/017-MIPS-pci-ar724x-use-dynamically-allocated-PCI-contro.patch deleted file mode 100644 index a960cb3..0000000 --- a/target/linux/ar71xx/patches-3.8/017-MIPS-pci-ar724x-use-dynamically-allocated-PCI-contro.patch +++ /dev/null @@ -1,321 +0,0 @@ -From 21b3cafae425cf2e317a22292a9a5773ff0e2e5e Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 3 Feb 2013 09:58:38 +0000 -Subject: [PATCH] MIPS: pci-ar724x: use dynamically allocated PCI controller - structure - -commit 908339ef25b1d5e80f1c6fab22b9958174708b4a upstream. - -The current code uses static variables to store the -PCI controller specific data. This works if the system -contains one PCI controller only, however it becomes -impractical when multiple PCI controllers are present. - -Move the variables into a dynamically allocated controller -specific structure, and use that instead of the static -variables. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4912/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/pci/pci-ar724x.c | 129 ++++++++++++++++++++++++++++---------------- - 1 file changed, 82 insertions(+), 47 deletions(-) - ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -9,6 +9,7 @@ - * by the Free Software Foundation. - */ - -+#include <linux/spinlock.h> - #include <linux/irq.h> - #include <linux/pci.h> - #include <linux/module.h> -@@ -28,38 +29,56 @@ - - #define AR7240_BAR0_WAR_VALUE 0xffff - --static DEFINE_SPINLOCK(ar724x_pci_lock); --static void __iomem *ar724x_pci_devcfg_base; --static void __iomem *ar724x_pci_ctrl_base; -- --static u32 ar724x_pci_bar0_value; --static bool ar724x_pci_bar0_is_cached; --static bool ar724x_pci_link_up; -+struct ar724x_pci_controller { -+ void __iomem *devcfg_base; -+ void __iomem *ctrl_base; - --static inline bool ar724x_pci_check_link(void) -+ int irq; -+ -+ bool link_up; -+ bool bar0_is_cached; -+ u32 bar0_value; -+ -+ spinlock_t lock; -+ -+ struct pci_controller pci_controller; -+}; -+ -+static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc) - { - u32 reset; - -- reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET); -+ reset = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_RESET); - return reset & AR724X_PCI_RESET_LINK_UP; - } - -+static inline struct ar724x_pci_controller * -+pci_bus_to_ar724x_controller(struct pci_bus *bus) -+{ -+ struct pci_controller *hose; -+ -+ hose = (struct pci_controller *) bus->sysdata; -+ return container_of(hose, struct ar724x_pci_controller, pci_controller); -+} -+ - static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, - int size, uint32_t *value) - { -+ struct ar724x_pci_controller *apc; - unsigned long flags; - void __iomem *base; - u32 data; - -- if (!ar724x_pci_link_up) -+ apc = pci_bus_to_ar724x_controller(bus); -+ if (!apc->link_up) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (devfn) - return PCIBIOS_DEVICE_NOT_FOUND; - -- base = ar724x_pci_devcfg_base; -+ base = apc->devcfg_base; - -- spin_lock_irqsave(&ar724x_pci_lock, flags); -+ spin_lock_irqsave(&apc->lock, flags); - data = __raw_readl(base + (where & ~3)); - - switch (size) { -@@ -78,17 +97,17 @@ static int ar724x_pci_read(struct pci_bu - case 4: - break; - default: -- spin_unlock_irqrestore(&ar724x_pci_lock, flags); -+ spin_unlock_irqrestore(&apc->lock, flags); - - return PCIBIOS_BAD_REGISTER_NUMBER; - } - -- spin_unlock_irqrestore(&ar724x_pci_lock, flags); -+ spin_unlock_irqrestore(&apc->lock, flags); - - if (where == PCI_BASE_ADDRESS_0 && size == 4 && -- ar724x_pci_bar0_is_cached) { -+ apc->bar0_is_cached) { - /* use the cached value */ -- *value = ar724x_pci_bar0_value; -+ *value = apc->bar0_value; - } else { - *value = data; - } -@@ -99,12 +118,14 @@ static int ar724x_pci_read(struct pci_bu - static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, - int size, uint32_t value) - { -+ struct ar724x_pci_controller *apc; - unsigned long flags; - void __iomem *base; - u32 data; - int s; - -- if (!ar724x_pci_link_up) -+ apc = pci_bus_to_ar724x_controller(bus); -+ if (!apc->link_up) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (devfn) -@@ -122,18 +143,18 @@ static int ar724x_pci_write(struct pci_b - * BAR0 register in order to make the device memory - * accessible. - */ -- ar724x_pci_bar0_is_cached = true; -- ar724x_pci_bar0_value = value; -+ apc->bar0_is_cached = true; -+ apc->bar0_value = value; - - value = AR7240_BAR0_WAR_VALUE; - } else { -- ar724x_pci_bar0_is_cached = false; -+ apc->bar0_is_cached = false; - } - } - -- base = ar724x_pci_devcfg_base; -+ base = apc->devcfg_base; - -- spin_lock_irqsave(&ar724x_pci_lock, flags); -+ spin_lock_irqsave(&apc->lock, flags); - data = __raw_readl(base + (where & ~3)); - - switch (size) { -@@ -151,7 +172,7 @@ static int ar724x_pci_write(struct pci_b - data = value; - break; - default: -- spin_unlock_irqrestore(&ar724x_pci_lock, flags); -+ spin_unlock_irqrestore(&apc->lock, flags); - - return PCIBIOS_BAD_REGISTER_NUMBER; - } -@@ -159,7 +180,7 @@ static int ar724x_pci_write(struct pci_b - __raw_writel(data, base + (where & ~3)); - /* flush write */ - __raw_readl(base + (where & ~3)); -- spin_unlock_irqrestore(&ar724x_pci_lock, flags); -+ spin_unlock_irqrestore(&apc->lock, flags); - - return PCIBIOS_SUCCESSFUL; - } -@@ -183,18 +204,14 @@ static struct resource ar724x_mem_resour - .flags = IORESOURCE_MEM, - }; - --static struct pci_controller ar724x_pci_controller = { -- .pci_ops = &ar724x_pci_ops, -- .io_resource = &ar724x_io_resource, -- .mem_resource = &ar724x_mem_resource, --}; -- - static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc) - { -+ struct ar724x_pci_controller *apc; - void __iomem *base; - u32 pending; - -- base = ar724x_pci_ctrl_base; -+ apc = irq_get_handler_data(irq); -+ base = apc->ctrl_base; - - pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) & - __raw_readl(base + AR724X_PCI_REG_INT_MASK); -@@ -208,10 +225,12 @@ static void ar724x_pci_irq_handler(unsig - - static void ar724x_pci_irq_unmask(struct irq_data *d) - { -+ struct ar724x_pci_controller *apc; - void __iomem *base; - u32 t; - -- base = ar724x_pci_ctrl_base; -+ apc = irq_data_get_irq_chip_data(d); -+ base = apc->ctrl_base; - - switch (d->irq) { - case ATH79_PCI_IRQ(0): -@@ -225,10 +244,12 @@ static void ar724x_pci_irq_unmask(struct - - static void ar724x_pci_irq_mask(struct irq_data *d) - { -+ struct ar724x_pci_controller *apc; - void __iomem *base; - u32 t; - -- base = ar724x_pci_ctrl_base; -+ apc = irq_data_get_irq_chip_data(d); -+ base = apc->ctrl_base; - - switch (d->irq) { - case ATH79_PCI_IRQ(0): -@@ -255,12 +276,12 @@ static struct irq_chip ar724x_pci_irq_ch - .irq_mask_ack = ar724x_pci_irq_mask, - }; - --static void ar724x_pci_irq_init(int irq) -+static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc) - { - void __iomem *base; - int i; - -- base = ar724x_pci_ctrl_base; -+ base = apc->ctrl_base; - - __raw_writel(0, base + AR724X_PCI_REG_INT_MASK); - __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS); -@@ -268,45 +289,59 @@ static void ar724x_pci_irq_init(int irq) - BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT); - - for (i = ATH79_PCI_IRQ_BASE; -- i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++) -+ i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++) { - irq_set_chip_and_handler(i, &ar724x_pci_irq_chip, - handle_level_irq); -+ irq_set_chip_data(i, apc); -+ } - -- irq_set_chained_handler(irq, ar724x_pci_irq_handler); -+ irq_set_handler_data(apc->irq, apc); -+ irq_set_chained_handler(apc->irq, ar724x_pci_irq_handler); - } - - static int ar724x_pci_probe(struct platform_device *pdev) - { -+ struct ar724x_pci_controller *apc; - struct resource *res; -- int irq; -+ -+ apc = devm_kzalloc(&pdev->dev, sizeof(struct ar724x_pci_controller), -+ GFP_KERNEL); -+ if (!apc) -+ return -ENOMEM; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base"); - if (!res) - return -EINVAL; - -- ar724x_pci_ctrl_base = devm_request_and_ioremap(&pdev->dev, res); -- if (ar724x_pci_ctrl_base == NULL) -+ apc->ctrl_base = devm_request_and_ioremap(&pdev->dev, res); -+ if (apc->ctrl_base == NULL) - return -EBUSY; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base"); - if (!res) - return -EINVAL; - -- ar724x_pci_devcfg_base = devm_request_and_ioremap(&pdev->dev, res); -- if (!ar724x_pci_devcfg_base) -+ apc->devcfg_base = devm_request_and_ioremap(&pdev->dev, res); -+ if (!apc->devcfg_base) - return -EBUSY; - -- irq = platform_get_irq(pdev, 0); -- if (irq < 0) -+ apc->irq = platform_get_irq(pdev, 0); -+ if (apc->irq < 0) - return -EINVAL; - -- ar724x_pci_link_up = ar724x_pci_check_link(); -- if (!ar724x_pci_link_up) -+ spin_lock_init(&apc->lock); -+ -+ apc->pci_controller.pci_ops = &ar724x_pci_ops; -+ apc->pci_controller.io_resource = &ar724x_io_resource; -+ apc->pci_controller.mem_resource = &ar724x_mem_resource; -+ -+ apc->link_up = ar724x_pci_check_link(apc); -+ if (!apc->link_up) - dev_warn(&pdev->dev, "PCIe link is down\n"); - -- ar724x_pci_irq_init(irq); -+ ar724x_pci_irq_init(apc); - -- register_pci_controller(&ar724x_pci_controller); -+ register_pci_controller(&apc->pci_controller); - - return 0; - } diff --git a/target/linux/ar71xx/patches-3.8/018-MIPS-pci-ar724x-remove-static-PCI-IO-MEM-resources.patch b/target/linux/ar71xx/patches-3.8/018-MIPS-pci-ar724x-remove-static-PCI-IO-MEM-resources.patch deleted file mode 100644 index 823488a..0000000 --- a/target/linux/ar71xx/patches-3.8/018-MIPS-pci-ar724x-remove-static-PCI-IO-MEM-resources.patch +++ /dev/null @@ -1,139 +0,0 @@ -From d80b05d19c2772ded40403d578d8e90d38c85257 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 3 Feb 2013 09:59:45 +0000 -Subject: [PATCH] MIPS: pci-ar724x: remove static PCI IO/MEM resources - -commit 34b134aebda89888b6985b7a3139e9cbdf209236 upstream. - -Static resources become impractical when multiple -PCI controllers are present. Move the resources -into the platform device registration code and -change the probe routine to get those from there -platform device's resources. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4914/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/pci.c | 21 ++++++++++++++++++++- - arch/mips/pci/pci-ar724x.c | 40 ++++++++++++++++++++++++---------------- - 2 files changed, 44 insertions(+), 17 deletions(-) - ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -139,10 +139,13 @@ static struct platform_device * - ath79_register_pci_ar724x(int id, - unsigned long cfg_base, - unsigned long ctrl_base, -+ unsigned long mem_base, -+ unsigned long mem_size, -+ unsigned long io_base, - int irq) - { - struct platform_device *pdev; -- struct resource res[3]; -+ struct resource res[5]; - - memset(res, 0, sizeof(res)); - -@@ -160,6 +163,16 @@ ath79_register_pci_ar724x(int id, - res[2].start = irq; - res[2].end = irq; - -+ res[3].name = "mem_base"; -+ res[3].flags = IORESOURCE_MEM; -+ res[3].start = mem_base; -+ res[3].end = mem_base + mem_size - 1; -+ -+ res[4].name = "io_base"; -+ res[4].flags = IORESOURCE_IO; -+ res[4].start = io_base; -+ res[4].end = io_base; -+ - pdev = platform_device_register_simple("ar724x-pci", id, - res, ARRAY_SIZE(res)); - return pdev; -@@ -175,6 +188,9 @@ int __init ath79_register_pci(void) - pdev = ath79_register_pci_ar724x(-1, - AR724X_PCI_CFG_BASE, - AR724X_PCI_CTRL_BASE, -+ AR724X_PCI_MEM_BASE, -+ AR724X_PCI_MEM_SIZE, -+ 0, - ATH79_CPU_IRQ_IP2); - } else if (soc_is_ar9342() || - soc_is_ar9344()) { -@@ -187,6 +203,9 @@ int __init ath79_register_pci(void) - pdev = ath79_register_pci_ar724x(-1, - AR724X_PCI_CFG_BASE, - AR724X_PCI_CTRL_BASE, -+ AR724X_PCI_MEM_BASE, -+ AR724X_PCI_MEM_SIZE, -+ 0, - ATH79_IP2_IRQ(0)); - } else { - /* No PCI support */ ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -42,6 +42,8 @@ struct ar724x_pci_controller { - spinlock_t lock; - - struct pci_controller pci_controller; -+ struct resource io_res; -+ struct resource mem_res; - }; - - static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc) -@@ -190,20 +192,6 @@ static struct pci_ops ar724x_pci_ops = { - .write = ar724x_pci_write, - }; - --static struct resource ar724x_io_resource = { -- .name = "PCI IO space", -- .start = 0, -- .end = 0, -- .flags = IORESOURCE_IO, --}; -- --static struct resource ar724x_mem_resource = { -- .name = "PCI memory space", -- .start = AR724X_PCI_MEM_BASE, -- .end = AR724X_PCI_MEM_BASE + AR724X_PCI_MEM_SIZE - 1, -- .flags = IORESOURCE_MEM, --}; -- - static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc) - { - struct ar724x_pci_controller *apc; -@@ -331,9 +319,29 @@ static int ar724x_pci_probe(struct platf - - spin_lock_init(&apc->lock); - -+ res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base"); -+ if (!res) -+ return -EINVAL; -+ -+ apc->io_res.parent = res; -+ apc->io_res.name = "PCI IO space"; -+ apc->io_res.start = res->start; -+ apc->io_res.end = res->end; -+ apc->io_res.flags = IORESOURCE_IO; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base"); -+ if (!res) -+ return -EINVAL; -+ -+ apc->mem_res.parent = res; -+ apc->mem_res.name = "PCI memory space"; -+ apc->mem_res.start = res->start; -+ apc->mem_res.end = res->end; -+ apc->mem_res.flags = IORESOURCE_MEM; -+ - apc->pci_controller.pci_ops = &ar724x_pci_ops; -- apc->pci_controller.io_resource = &ar724x_io_resource; -- apc->pci_controller.mem_resource = &ar724x_mem_resource; -+ apc->pci_controller.io_resource = &apc->io_res; -+ apc->pci_controller.mem_resource = &apc->mem_res; - - apc->link_up = ar724x_pci_check_link(apc); - if (!apc->link_up) diff --git a/target/linux/ar71xx/patches-3.8/019-MIPS-pci-ar724x-use-per-controller-IRQ-base.patch b/target/linux/ar71xx/patches-3.8/019-MIPS-pci-ar724x-use-per-controller-IRQ-base.patch deleted file mode 100644 index 0eabfb1..0000000 --- a/target/linux/ar71xx/patches-3.8/019-MIPS-pci-ar724x-use-per-controller-IRQ-base.patch +++ /dev/null @@ -1,117 +0,0 @@ -From d85015ff3ab6df0e776c2aefc51f2da023c1edcf Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 3 Feb 2013 10:00:16 +0000 -Subject: [PATCH] MIPS: pci-ar724x: use per-controller IRQ base - -commit 8b66d461187ff61c5755001af7296e6edde48423 upstream. - -Change to the code to use per-controller IRQ base. -This is needed for multiple PCI controller support. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4915/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/pci/pci-ar724x.c | 31 +++++++++++++++++++++---------- - 1 file changed, 21 insertions(+), 10 deletions(-) - ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -34,6 +34,7 @@ struct ar724x_pci_controller { - void __iomem *ctrl_base; - - int irq; -+ int irq_base; - - bool link_up; - bool bar0_is_cached; -@@ -205,7 +206,7 @@ static void ar724x_pci_irq_handler(unsig - __raw_readl(base + AR724X_PCI_REG_INT_MASK); - - if (pending & AR724X_PCI_INT_DEV0) -- generic_handle_irq(ATH79_PCI_IRQ(0)); -+ generic_handle_irq(apc->irq_base + 0); - - else - spurious_interrupt(); -@@ -215,13 +216,15 @@ static void ar724x_pci_irq_unmask(struct - { - struct ar724x_pci_controller *apc; - void __iomem *base; -+ int offset; - u32 t; - - apc = irq_data_get_irq_chip_data(d); - base = apc->ctrl_base; -+ offset = apc->irq_base - d->irq; - -- switch (d->irq) { -- case ATH79_PCI_IRQ(0): -+ switch (offset) { -+ case 0: - t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); - __raw_writel(t | AR724X_PCI_INT_DEV0, - base + AR724X_PCI_REG_INT_MASK); -@@ -234,13 +237,15 @@ static void ar724x_pci_irq_mask(struct i - { - struct ar724x_pci_controller *apc; - void __iomem *base; -+ int offset; - u32 t; - - apc = irq_data_get_irq_chip_data(d); - base = apc->ctrl_base; -+ offset = apc->irq_base - d->irq; - -- switch (d->irq) { -- case ATH79_PCI_IRQ(0): -+ switch (offset) { -+ case 0: - t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); - __raw_writel(t & ~AR724X_PCI_INT_DEV0, - base + AR724X_PCI_REG_INT_MASK); -@@ -264,7 +269,8 @@ static struct irq_chip ar724x_pci_irq_ch - .irq_mask_ack = ar724x_pci_irq_mask, - }; - --static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc) -+static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc, -+ int id) - { - void __iomem *base; - int i; -@@ -274,10 +280,10 @@ static void ar724x_pci_irq_init(struct a - __raw_writel(0, base + AR724X_PCI_REG_INT_MASK); - __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS); - -- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT); -+ apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT); - -- for (i = ATH79_PCI_IRQ_BASE; -- i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++) { -+ for (i = apc->irq_base; -+ i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) { - irq_set_chip_and_handler(i, &ar724x_pci_irq_chip, - handle_level_irq); - irq_set_chip_data(i, apc); -@@ -291,6 +297,11 @@ static int ar724x_pci_probe(struct platf - { - struct ar724x_pci_controller *apc; - struct resource *res; -+ int id; -+ -+ id = pdev->id; -+ if (id == -1) -+ id = 0; - - apc = devm_kzalloc(&pdev->dev, sizeof(struct ar724x_pci_controller), - GFP_KERNEL); -@@ -347,7 +358,7 @@ static int ar724x_pci_probe(struct platf - if (!apc->link_up) - dev_warn(&pdev->dev, "PCIe link is down\n"); - -- ar724x_pci_irq_init(apc); -+ ar724x_pci_irq_init(apc, id); - - register_pci_controller(&apc->pci_controller); - diff --git a/target/linux/ar71xx/patches-3.8/020-MIPS-pci-ar724x-setup-command-register-of-the-PCI-co.patch b/target/linux/ar71xx/patches-3.8/020-MIPS-pci-ar724x-setup-command-register-of-the-PCI-co.patch deleted file mode 100644 index 301803c..0000000 --- a/target/linux/ar71xx/patches-3.8/020-MIPS-pci-ar724x-setup-command-register-of-the-PCI-co.patch +++ /dev/null @@ -1,178 +0,0 @@ -From 5e079d9b7ac5dda3be9f215f8440333597f57b26 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 3 Feb 2013 14:52:47 +0000 -Subject: [PATCH] MIPS: pci-ar724x: setup command register of the PCI - controller - -commit 12401fc28d40aa5bf8bda6991a96b6d7a3dae3ac upstream. - -The command register of the PCI controller is -not initialized correctly by the bootloader on -some boards and this leads to non working PCI -bus. - -Add code to initialize the command register -from the Linux code to avoid this. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4916/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/pci.c | 10 +++- - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 + - arch/mips/pci/pci-ar724x.c | 63 ++++++++++++++++++++++++ - 3 files changed, 74 insertions(+), 1 deletion(-) - ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -139,13 +139,14 @@ static struct platform_device * - ath79_register_pci_ar724x(int id, - unsigned long cfg_base, - unsigned long ctrl_base, -+ unsigned long crp_base, - unsigned long mem_base, - unsigned long mem_size, - unsigned long io_base, - int irq) - { - struct platform_device *pdev; -- struct resource res[5]; -+ struct resource res[6]; - - memset(res, 0, sizeof(res)); - -@@ -173,6 +174,11 @@ ath79_register_pci_ar724x(int id, - res[4].start = io_base; - res[4].end = io_base; - -+ res[5].name = "crp_base"; -+ res[5].flags = IORESOURCE_MEM; -+ res[5].start = crp_base; -+ res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1; -+ - pdev = platform_device_register_simple("ar724x-pci", id, - res, ARRAY_SIZE(res)); - return pdev; -@@ -188,6 +194,7 @@ int __init ath79_register_pci(void) - pdev = ath79_register_pci_ar724x(-1, - AR724X_PCI_CFG_BASE, - AR724X_PCI_CTRL_BASE, -+ AR724X_PCI_CRP_BASE, - AR724X_PCI_MEM_BASE, - AR724X_PCI_MEM_SIZE, - 0, -@@ -203,6 +210,7 @@ int __init ath79_register_pci(void) - pdev = ath79_register_pci_ar724x(-1, - AR724X_PCI_CFG_BASE, - AR724X_PCI_CTRL_BASE, -+ AR724X_PCI_CRP_BASE, - AR724X_PCI_MEM_BASE, - AR724X_PCI_MEM_SIZE, - 0, ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -67,6 +67,8 @@ - - #define AR724X_PCI_CFG_BASE 0x14000000 - #define AR724X_PCI_CFG_SIZE 0x1000 -+#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000c0000) -+#define AR724X_PCI_CRP_SIZE 0x1000 - #define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000) - #define AR724X_PCI_CTRL_SIZE 0x100 - ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -29,9 +29,17 @@ - - #define AR7240_BAR0_WAR_VALUE 0xffff - -+#define AR724X_PCI_CMD_INIT (PCI_COMMAND_MEMORY | \ -+ PCI_COMMAND_MASTER | \ -+ PCI_COMMAND_INVALIDATE | \ -+ PCI_COMMAND_PARITY | \ -+ PCI_COMMAND_SERR | \ -+ PCI_COMMAND_FAST_BACK) -+ - struct ar724x_pci_controller { - void __iomem *devcfg_base; - void __iomem *ctrl_base; -+ void __iomem *crp_base; - - int irq; - int irq_base; -@@ -64,6 +72,51 @@ pci_bus_to_ar724x_controller(struct pci_ - return container_of(hose, struct ar724x_pci_controller, pci_controller); - } - -+static int ar724x_pci_local_write(struct ar724x_pci_controller *apc, -+ int where, int size, u32 value) -+{ -+ unsigned long flags; -+ void __iomem *base; -+ u32 data; -+ int s; -+ -+ WARN_ON(where & (size - 1)); -+ -+ if (!apc->link_up) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ -+ base = apc->crp_base; -+ -+ spin_lock_irqsave(&apc->lock, flags); -+ data = __raw_readl(base + (where & ~3)); -+ -+ switch (size) { -+ case 1: -+ s = ((where & 3) * 8); -+ data &= ~(0xff << s); -+ data |= ((value & 0xff) << s); -+ break; -+ case 2: -+ s = ((where & 2) * 8); -+ data &= ~(0xffff << s); -+ data |= ((value & 0xffff) << s); -+ break; -+ case 4: -+ data = value; -+ break; -+ default: -+ spin_unlock_irqrestore(&apc->lock, flags); -+ return PCIBIOS_BAD_REGISTER_NUMBER; -+ } -+ -+ __raw_writel(data, base + (where & ~3)); -+ /* flush write */ -+ __raw_readl(base + (where & ~3)); -+ spin_unlock_irqrestore(&apc->lock, flags); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ - static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, - int size, uint32_t *value) - { -@@ -324,6 +377,14 @@ static int ar724x_pci_probe(struct platf - if (!apc->devcfg_base) - return -EBUSY; - -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base"); -+ if (!res) -+ return -EINVAL; -+ -+ apc->crp_base = devm_request_and_ioremap(&pdev->dev, res); -+ if (apc->crp_base == NULL) -+ return -EBUSY; -+ - apc->irq = platform_get_irq(pdev, 0); - if (apc->irq < 0) - return -EINVAL; -@@ -360,6 +421,8 @@ static int ar724x_pci_probe(struct platf - - ar724x_pci_irq_init(apc, id); - -+ ar724x_pci_local_write(apc, PCI_COMMAND, 4, AR724X_PCI_CMD_INIT); -+ - register_pci_controller(&apc->pci_controller); - - return 0; diff --git a/target/linux/ar71xx/patches-3.8/021-MIPS-pci-ar71xx-use-dynamically-allocated-PCI-contro.patch b/target/linux/ar71xx/patches-3.8/021-MIPS-pci-ar71xx-use-dynamically-allocated-PCI-contro.patch deleted file mode 100644 index a8b53c8..0000000 --- a/target/linux/ar71xx/patches-3.8/021-MIPS-pci-ar71xx-use-dynamically-allocated-PCI-contro.patch +++ /dev/null @@ -1,226 +0,0 @@ -From 0f0f7d810226c734141a20de85289dbb0dda8f96 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 7 Feb 2013 19:28:14 +0000 -Subject: [PATCH] MIPS: pci-ar71xx: use dynamically allocated PCI controller - structure - -commit f18118a868f1f7e7bdfea176a204fcc44fae2985 upstream. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4926/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/pci/pci-ar71xx.c | 84 ++++++++++++++++++++++++++++---------------- - 1 file changed, 53 insertions(+), 31 deletions(-) - ---- a/arch/mips/pci/pci-ar71xx.c -+++ b/arch/mips/pci/pci-ar71xx.c -@@ -48,8 +48,12 @@ - - #define AR71XX_PCI_IRQ_COUNT 5 - --static DEFINE_SPINLOCK(ar71xx_pci_lock); --static void __iomem *ar71xx_pcicfg_base; -+struct ar71xx_pci_controller { -+ void __iomem *cfg_base; -+ spinlock_t lock; -+ int irq; -+ struct pci_controller pci_ctrl; -+}; - - /* Byte lane enable bits */ - static const u8 ar71xx_pci_ble_table[4][4] = { -@@ -92,9 +96,18 @@ static inline u32 ar71xx_pci_bus_addr(st - return ret; - } - --static int ar71xx_pci_check_error(int quiet) -+static inline struct ar71xx_pci_controller * -+pci_bus_to_ar71xx_controller(struct pci_bus *bus) - { -- void __iomem *base = ar71xx_pcicfg_base; -+ struct pci_controller *hose; -+ -+ hose = (struct pci_controller *) bus->sysdata; -+ return container_of(hose, struct ar71xx_pci_controller, pci_ctrl); -+} -+ -+static int ar71xx_pci_check_error(struct ar71xx_pci_controller *apc, int quiet) -+{ -+ void __iomem *base = apc->cfg_base; - u32 pci_err; - u32 ahb_err; - -@@ -129,9 +142,10 @@ static int ar71xx_pci_check_error(int qu - return !!(ahb_err | pci_err); - } - --static inline void ar71xx_pci_local_write(int where, int size, u32 value) -+static inline void ar71xx_pci_local_write(struct ar71xx_pci_controller *apc, -+ int where, int size, u32 value) - { -- void __iomem *base = ar71xx_pcicfg_base; -+ void __iomem *base = apc->cfg_base; - u32 ad_cbe; - - value = value << (8 * (where & 3)); -@@ -147,7 +161,8 @@ static inline int ar71xx_pci_set_cfgaddr - unsigned int devfn, - int where, int size, u32 cmd) - { -- void __iomem *base = ar71xx_pcicfg_base; -+ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus); -+ void __iomem *base = apc->cfg_base; - u32 addr; - - addr = ar71xx_pci_bus_addr(bus, devfn, where); -@@ -156,13 +171,14 @@ static inline int ar71xx_pci_set_cfgaddr - __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0), - base + AR71XX_PCI_REG_CFG_CBE); - -- return ar71xx_pci_check_error(1); -+ return ar71xx_pci_check_error(apc, 1); - } - - static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *value) - { -- void __iomem *base = ar71xx_pcicfg_base; -+ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus); -+ void __iomem *base = apc->cfg_base; - unsigned long flags; - u32 data; - int err; -@@ -171,7 +187,7 @@ static int ar71xx_pci_read_config(struct - ret = PCIBIOS_SUCCESSFUL; - data = ~0; - -- spin_lock_irqsave(&ar71xx_pci_lock, flags); -+ spin_lock_irqsave(&apc->lock, flags); - - err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, - AR71XX_PCI_CFG_CMD_READ); -@@ -180,7 +196,7 @@ static int ar71xx_pci_read_config(struct - else - data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA); - -- spin_unlock_irqrestore(&ar71xx_pci_lock, flags); -+ spin_unlock_irqrestore(&apc->lock, flags); - - *value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7]; - -@@ -190,7 +206,8 @@ static int ar71xx_pci_read_config(struct - static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 value) - { -- void __iomem *base = ar71xx_pcicfg_base; -+ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus); -+ void __iomem *base = apc->cfg_base; - unsigned long flags; - int err; - int ret; -@@ -198,7 +215,7 @@ static int ar71xx_pci_write_config(struc - value = value << (8 * (where & 3)); - ret = PCIBIOS_SUCCESSFUL; - -- spin_lock_irqsave(&ar71xx_pci_lock, flags); -+ spin_lock_irqsave(&apc->lock, flags); - - err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, - AR71XX_PCI_CFG_CMD_WRITE); -@@ -207,7 +224,7 @@ static int ar71xx_pci_write_config(struc - else - __raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA); - -- spin_unlock_irqrestore(&ar71xx_pci_lock, flags); -+ spin_unlock_irqrestore(&apc->lock, flags); - - return ret; - } -@@ -231,12 +248,6 @@ static struct resource ar71xx_pci_mem_re - .flags = IORESOURCE_MEM - }; - --static struct pci_controller ar71xx_pci_controller = { -- .pci_ops = &ar71xx_pci_ops, -- .mem_resource = &ar71xx_pci_mem_resource, -- .io_resource = &ar71xx_pci_io_resource, --}; -- - static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc) - { - void __iomem *base = ath79_reset_base; -@@ -294,7 +305,7 @@ static struct irq_chip ar71xx_pci_irq_ch - .irq_mask_ack = ar71xx_pci_irq_mask, - }; - --static void ar71xx_pci_irq_init(int irq) -+static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc) - { - void __iomem *base = ath79_reset_base; - int i; -@@ -309,7 +320,7 @@ static void ar71xx_pci_irq_init(int irq) - irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, - handle_level_irq); - -- irq_set_chained_handler(irq, ar71xx_pci_irq_handler); -+ irq_set_chained_handler(apc->irq, ar71xx_pci_irq_handler); - } - - static void ar71xx_pci_reset(void) -@@ -336,20 +347,27 @@ static void ar71xx_pci_reset(void) - - static int ar71xx_pci_probe(struct platform_device *pdev) - { -+ struct ar71xx_pci_controller *apc; - struct resource *res; -- int irq; - u32 t; - -+ apc = devm_kzalloc(&pdev->dev, sizeof(struct ar71xx_pci_controller), -+ GFP_KERNEL); -+ if (!apc) -+ return -ENOMEM; -+ -+ spin_lock_init(&apc->lock); -+ - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base"); - if (!res) - return -EINVAL; - -- ar71xx_pcicfg_base = devm_request_and_ioremap(&pdev->dev, res); -- if (!ar71xx_pcicfg_base) -+ apc->cfg_base = devm_request_and_ioremap(&pdev->dev, res); -+ if (!apc->cfg_base) - return -ENOMEM; - -- irq = platform_get_irq(pdev, 0); -- if (irq < 0) -+ apc->irq = platform_get_irq(pdev, 0); -+ if (apc->irq < 0) - return -EINVAL; - - ar71xx_pci_reset(); -@@ -357,14 +375,18 @@ static int ar71xx_pci_probe(struct platf - /* setup COMMAND register */ - t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE - | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK; -- ar71xx_pci_local_write(PCI_COMMAND, 4, t); -+ ar71xx_pci_local_write(apc, PCI_COMMAND, 4, t); - - /* clear bus errors */ -- ar71xx_pci_check_error(1); -+ ar71xx_pci_check_error(apc, 1); -+ -+ ar71xx_pci_irq_init(apc); - -- ar71xx_pci_irq_init(irq); -+ apc->pci_ctrl.pci_ops = &ar71xx_pci_ops; -+ apc->pci_ctrl.mem_resource = &ar71xx_pci_mem_resource; -+ apc->pci_ctrl.io_resource = &ar71xx_pci_io_resource; - -- register_pci_controller(&ar71xx_pci_controller); -+ register_pci_controller(&apc->pci_ctrl); - - return 0; - } diff --git a/target/linux/ar71xx/patches-3.8/022-MIPS-pci-ar71xx-remove-static-PCI-IO-MEM-resources.patch b/target/linux/ar71xx/patches-3.8/022-MIPS-pci-ar71xx-remove-static-PCI-IO-MEM-resources.patch deleted file mode 100644 index c7c4064..0000000 --- a/target/linux/ar71xx/patches-3.8/022-MIPS-pci-ar71xx-remove-static-PCI-IO-MEM-resources.patch +++ /dev/null @@ -1,113 +0,0 @@ -From f073cb029873ed487e14784d3682b6aa25afe997 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 7 Feb 2013 19:28:15 +0000 -Subject: [PATCH] MIPS: pci-ar71xx: remove static PCI IO/MEM resources - -commit 42cb60d1fab4c81ef24876d985e08fc5bb899e41 upstream. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4927/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/pci.c | 12 +++++++++++- - arch/mips/pci/pci-ar71xx.c | 40 ++++++++++++++++++++++++---------------- - 2 files changed, 35 insertions(+), 17 deletions(-) - ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -117,7 +117,7 @@ static struct platform_device * - ath79_register_pci_ar71xx(void) - { - struct platform_device *pdev; -- struct resource res[2]; -+ struct resource res[4]; - - memset(res, 0, sizeof(res)); - -@@ -130,6 +130,16 @@ ath79_register_pci_ar71xx(void) - res[1].start = ATH79_CPU_IRQ_IP2; - res[1].end = ATH79_CPU_IRQ_IP2; - -+ res[2].name = "io_base"; -+ res[2].flags = IORESOURCE_IO; -+ res[2].start = 0; -+ res[2].end = 0; -+ -+ res[3].name = "mem_base"; -+ res[3].flags = IORESOURCE_MEM; -+ res[3].start = AR71XX_PCI_MEM_BASE; -+ res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1; -+ - pdev = platform_device_register_simple("ar71xx-pci", -1, - res, ARRAY_SIZE(res)); - return pdev; ---- a/arch/mips/pci/pci-ar71xx.c -+++ b/arch/mips/pci/pci-ar71xx.c -@@ -53,6 +53,8 @@ struct ar71xx_pci_controller { - spinlock_t lock; - int irq; - struct pci_controller pci_ctrl; -+ struct resource io_res; -+ struct resource mem_res; - }; - - /* Byte lane enable bits */ -@@ -234,20 +236,6 @@ static struct pci_ops ar71xx_pci_ops = { - .write = ar71xx_pci_write_config, - }; - --static struct resource ar71xx_pci_io_resource = { -- .name = "PCI IO space", -- .start = 0, -- .end = 0, -- .flags = IORESOURCE_IO, --}; -- --static struct resource ar71xx_pci_mem_resource = { -- .name = "PCI memory space", -- .start = AR71XX_PCI_MEM_BASE, -- .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1, -- .flags = IORESOURCE_MEM --}; -- - static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc) - { - void __iomem *base = ath79_reset_base; -@@ -370,6 +358,26 @@ static int ar71xx_pci_probe(struct platf - if (apc->irq < 0) - return -EINVAL; - -+ res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base"); -+ if (!res) -+ return -EINVAL; -+ -+ apc->io_res.parent = res; -+ apc->io_res.name = "PCI IO space"; -+ apc->io_res.start = res->start; -+ apc->io_res.end = res->end; -+ apc->io_res.flags = IORESOURCE_IO; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base"); -+ if (!res) -+ return -EINVAL; -+ -+ apc->mem_res.parent = res; -+ apc->mem_res.name = "PCI memory space"; -+ apc->mem_res.start = res->start; -+ apc->mem_res.end = res->end; -+ apc->mem_res.flags = IORESOURCE_MEM; -+ - ar71xx_pci_reset(); - - /* setup COMMAND register */ -@@ -383,8 +391,8 @@ static int ar71xx_pci_probe(struct platf - ar71xx_pci_irq_init(apc); - - apc->pci_ctrl.pci_ops = &ar71xx_pci_ops; -- apc->pci_ctrl.mem_resource = &ar71xx_pci_mem_resource; -- apc->pci_ctrl.io_resource = &ar71xx_pci_io_resource; -+ apc->pci_ctrl.mem_resource = &apc->mem_res; -+ apc->pci_ctrl.io_resource = &apc->io_res; - - register_pci_controller(&apc->pci_ctrl); - diff --git a/target/linux/ar71xx/patches-3.8/023-MIPS-pci-ar71xx-move-irq-base-to-the-controller-stru.patch b/target/linux/ar71xx/patches-3.8/023-MIPS-pci-ar71xx-move-irq-base-to-the-controller-stru.patch deleted file mode 100644 index 78c2f07..0000000 --- a/target/linux/ar71xx/patches-3.8/023-MIPS-pci-ar71xx-move-irq-base-to-the-controller-stru.patch +++ /dev/null @@ -1,105 +0,0 @@ -From bec8339e917651e51592dd57ed005f8ccd9b0e8d Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 7 Feb 2013 19:29:38 +0000 -Subject: [PATCH] MIPS: pci-ar71xx: move irq base to the controller structure - -commit 326e8d17d73fdf213f6334917ef46b2ba7b1354a upstream. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4928/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/pci/pci-ar71xx.c | 32 ++++++++++++++++++++++++-------- - 1 file changed, 24 insertions(+), 8 deletions(-) - ---- a/arch/mips/pci/pci-ar71xx.c -+++ b/arch/mips/pci/pci-ar71xx.c -@@ -52,6 +52,7 @@ struct ar71xx_pci_controller { - void __iomem *cfg_base; - spinlock_t lock; - int irq; -+ int irq_base; - struct pci_controller pci_ctrl; - struct resource io_res; - struct resource mem_res; -@@ -238,23 +239,26 @@ static struct pci_ops ar71xx_pci_ops = { - - static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc) - { -+ struct ar71xx_pci_controller *apc; - void __iomem *base = ath79_reset_base; - u32 pending; - -+ apc = irq_get_handler_data(irq); -+ - pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & - __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); - - if (pending & AR71XX_PCI_INT_DEV0) -- generic_handle_irq(ATH79_PCI_IRQ(0)); -+ generic_handle_irq(apc->irq_base + 0); - - else if (pending & AR71XX_PCI_INT_DEV1) -- generic_handle_irq(ATH79_PCI_IRQ(1)); -+ generic_handle_irq(apc->irq_base + 1); - - else if (pending & AR71XX_PCI_INT_DEV2) -- generic_handle_irq(ATH79_PCI_IRQ(2)); -+ generic_handle_irq(apc->irq_base + 2); - - else if (pending & AR71XX_PCI_INT_CORE) -- generic_handle_irq(ATH79_PCI_IRQ(4)); -+ generic_handle_irq(apc->irq_base + 4); - - else - spurious_interrupt(); -@@ -262,10 +266,14 @@ static void ar71xx_pci_irq_handler(unsig - - static void ar71xx_pci_irq_unmask(struct irq_data *d) - { -- unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE; -+ struct ar71xx_pci_controller *apc; -+ unsigned int irq; - void __iomem *base = ath79_reset_base; - u32 t; - -+ apc = irq_data_get_irq_chip_data(d); -+ irq = d->irq - apc->irq_base; -+ - t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); - __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); - -@@ -275,10 +283,14 @@ static void ar71xx_pci_irq_unmask(struct - - static void ar71xx_pci_irq_mask(struct irq_data *d) - { -- unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE; -+ struct ar71xx_pci_controller *apc; -+ unsigned int irq; - void __iomem *base = ath79_reset_base; - u32 t; - -+ apc = irq_data_get_irq_chip_data(d); -+ irq = d->irq - apc->irq_base; -+ - t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); - __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); - -@@ -303,11 +315,15 @@ static void ar71xx_pci_irq_init(struct a - - BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT); - -- for (i = ATH79_PCI_IRQ_BASE; -- i < ATH79_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) -+ apc->irq_base = ATH79_PCI_IRQ_BASE; -+ for (i = apc->irq_base; -+ i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) { - irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, - handle_level_irq); -+ irq_set_chip_data(i, apc); -+ } - -+ irq_set_handler_data(apc->irq, apc); - irq_set_chained_handler(apc->irq, ar71xx_pci_irq_handler); - } - diff --git a/target/linux/ar71xx/patches-3.8/024-ath79-add-ATH79_CPU_IRQ-macro.patch b/target/linux/ar71xx/patches-3.8/024-ath79-add-ATH79_CPU_IRQ-macro.patch deleted file mode 100644 index 3624433..0000000 --- a/target/linux/ar71xx/patches-3.8/024-ath79-add-ATH79_CPU_IRQ-macro.patch +++ /dev/null @@ -1,266 +0,0 @@ -From 7377d32d37490f0804662c76a72b68d45d93966e Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 7 Feb 2013 19:32:23 +0000 -Subject: [PATCH] ath79: add ATH79_CPU_IRQ() macro - -commit 7e69c10a8ee1f201c040997c6742c27e915730ad upstream. - -Remove the individual ATH79_CPU_IRQ_* constants and -use the new macro instead of those. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4929/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/dev-usb.c | 12 ++++++------ - arch/mips/ath79/dev-wmac.c | 8 ++++---- - arch/mips/ath79/irq.c | 32 ++++++++++++++++---------------- - arch/mips/ath79/pci.c | 6 +++--- - arch/mips/include/asm/mach-ath79/irq.h | 9 ++------- - 5 files changed, 31 insertions(+), 36 deletions(-) - ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -111,7 +111,7 @@ static void __init ath79_usb_setup(void) - platform_device_register(&ath79_ohci_device); - - ath79_usb_init_resource(ath79_ehci_resources, AR71XX_EHCI_BASE, -- AR71XX_EHCI_SIZE, ATH79_CPU_IRQ_USB); -+ AR71XX_EHCI_SIZE, ATH79_CPU_IRQ(3)); - ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1; - platform_device_register(&ath79_ehci_device); - } -@@ -136,7 +136,7 @@ static void __init ar7240_usb_setup(void - iounmap(usb_ctrl_base); - - ath79_usb_init_resource(ath79_ohci_resources, AR7240_OHCI_BASE, -- AR7240_OHCI_SIZE, ATH79_CPU_IRQ_USB); -+ AR7240_OHCI_SIZE, ATH79_CPU_IRQ(3)); - platform_device_register(&ath79_ohci_device); - } - -@@ -152,7 +152,7 @@ static void __init ar724x_usb_setup(void - mdelay(10); - - ath79_usb_init_resource(ath79_ehci_resources, AR724X_EHCI_BASE, -- AR724X_EHCI_SIZE, ATH79_CPU_IRQ_USB); -+ AR724X_EHCI_SIZE, ATH79_CPU_IRQ(3)); - ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; - platform_device_register(&ath79_ehci_device); - } -@@ -169,7 +169,7 @@ static void __init ar913x_usb_setup(void - mdelay(10); - - ath79_usb_init_resource(ath79_ehci_resources, AR913X_EHCI_BASE, -- AR913X_EHCI_SIZE, ATH79_CPU_IRQ_USB); -+ AR913X_EHCI_SIZE, ATH79_CPU_IRQ(3)); - ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; - platform_device_register(&ath79_ehci_device); - } -@@ -186,7 +186,7 @@ static void __init ar933x_usb_setup(void - mdelay(10); - - ath79_usb_init_resource(ath79_ehci_resources, AR933X_EHCI_BASE, -- AR933X_EHCI_SIZE, ATH79_CPU_IRQ_USB); -+ AR933X_EHCI_SIZE, ATH79_CPU_IRQ(3)); - ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; - platform_device_register(&ath79_ehci_device); - } -@@ -212,7 +212,7 @@ static void __init ar934x_usb_setup(void - udelay(1000); - - ath79_usb_init_resource(ath79_ehci_resources, AR934X_EHCI_BASE, -- AR934X_EHCI_SIZE, ATH79_CPU_IRQ_USB); -+ AR934X_EHCI_SIZE, ATH79_CPU_IRQ(3)); - ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; - platform_device_register(&ath79_ehci_device); - } ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -55,8 +55,8 @@ static void __init ar913x_wmac_setup(voi - - ath79_wmac_resources[0].start = AR913X_WMAC_BASE; - ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; -- ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2; -- ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2; -+ ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); -+ ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); - } - - -@@ -83,8 +83,8 @@ static void __init ar933x_wmac_setup(voi - - ath79_wmac_resources[0].start = AR933X_WMAC_BASE; - ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; -- ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2; -- ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2; -+ ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); -+ ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); - - t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - if (t & AR933X_BOOTSTRAP_REF_CLK_40) ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -114,7 +114,7 @@ static void __init ath79_misc_irq_init(v - handle_level_irq); - } - -- irq_set_chained_handler(ATH79_CPU_IRQ_MISC, ath79_misc_irq_handler); -+ irq_set_chained_handler(ATH79_CPU_IRQ(6), ath79_misc_irq_handler); - } - - static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc) -@@ -147,7 +147,7 @@ static void ar934x_ip2_irq_init(void) - irq_set_chip_and_handler(i, &dummy_irq_chip, - handle_level_irq); - -- irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch); -+ irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); - } - - asmlinkage void plat_irq_dispatch(void) -@@ -157,22 +157,22 @@ asmlinkage void plat_irq_dispatch(void) - pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) -- do_IRQ(ATH79_CPU_IRQ_TIMER); -+ do_IRQ(ATH79_CPU_IRQ(7)); - - else if (pending & STATUSF_IP2) - ath79_ip2_handler(); - - else if (pending & STATUSF_IP4) -- do_IRQ(ATH79_CPU_IRQ_GE0); -+ do_IRQ(ATH79_CPU_IRQ(4)); - - else if (pending & STATUSF_IP5) -- do_IRQ(ATH79_CPU_IRQ_GE1); -+ do_IRQ(ATH79_CPU_IRQ(5)); - - else if (pending & STATUSF_IP3) - ath79_ip3_handler(); - - else if (pending & STATUSF_IP6) -- do_IRQ(ATH79_CPU_IRQ_MISC); -+ do_IRQ(ATH79_CPU_IRQ(6)); - - else - spurious_interrupt(); -@@ -188,60 +188,60 @@ asmlinkage void plat_irq_dispatch(void) - static void ar71xx_ip2_handler(void) - { - ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI); -- do_IRQ(ATH79_CPU_IRQ_IP2); -+ do_IRQ(ATH79_CPU_IRQ(2)); - } - - static void ar724x_ip2_handler(void) - { - ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_PCIE); -- do_IRQ(ATH79_CPU_IRQ_IP2); -+ do_IRQ(ATH79_CPU_IRQ(2)); - } - - static void ar913x_ip2_handler(void) - { - ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_WMAC); -- do_IRQ(ATH79_CPU_IRQ_IP2); -+ do_IRQ(ATH79_CPU_IRQ(2)); - } - - static void ar933x_ip2_handler(void) - { - ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_WMAC); -- do_IRQ(ATH79_CPU_IRQ_IP2); -+ do_IRQ(ATH79_CPU_IRQ(2)); - } - - static void ar934x_ip2_handler(void) - { -- do_IRQ(ATH79_CPU_IRQ_IP2); -+ do_IRQ(ATH79_CPU_IRQ(2)); - } - - static void ar71xx_ip3_handler(void) - { - ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB); -- do_IRQ(ATH79_CPU_IRQ_USB); -+ do_IRQ(ATH79_CPU_IRQ(3)); - } - - static void ar724x_ip3_handler(void) - { - ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_USB); -- do_IRQ(ATH79_CPU_IRQ_USB); -+ do_IRQ(ATH79_CPU_IRQ(3)); - } - - static void ar913x_ip3_handler(void) - { - ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_USB); -- do_IRQ(ATH79_CPU_IRQ_USB); -+ do_IRQ(ATH79_CPU_IRQ(3)); - } - - static void ar933x_ip3_handler(void) - { - ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_USB); -- do_IRQ(ATH79_CPU_IRQ_USB); -+ do_IRQ(ATH79_CPU_IRQ(3)); - } - - static void ar934x_ip3_handler(void) - { - ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_USB); -- do_IRQ(ATH79_CPU_IRQ_USB); -+ do_IRQ(ATH79_CPU_IRQ(3)); - } - - void __init arch_init_irq(void) ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -127,8 +127,8 @@ ath79_register_pci_ar71xx(void) - res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1; - - res[1].flags = IORESOURCE_IRQ; -- res[1].start = ATH79_CPU_IRQ_IP2; -- res[1].end = ATH79_CPU_IRQ_IP2; -+ res[1].start = ATH79_CPU_IRQ(2); -+ res[1].end = ATH79_CPU_IRQ(2); - - res[2].name = "io_base"; - res[2].flags = IORESOURCE_IO; -@@ -208,7 +208,7 @@ int __init ath79_register_pci(void) - AR724X_PCI_MEM_BASE, - AR724X_PCI_MEM_SIZE, - 0, -- ATH79_CPU_IRQ_IP2); -+ ATH79_CPU_IRQ(2)); - } else if (soc_is_ar9342() || - soc_is_ar9344()) { - u32 bootstrap; ---- a/arch/mips/include/asm/mach-ath79/irq.h -+++ b/arch/mips/include/asm/mach-ath79/irq.h -@@ -12,6 +12,8 @@ - #define MIPS_CPU_IRQ_BASE 0 - #define NR_IRQS 48 - -+#define ATH79_CPU_IRQ(_x) (MIPS_CPU_IRQ_BASE + (_x)) -+ - #define ATH79_MISC_IRQ_BASE 8 - #define ATH79_MISC_IRQ_COUNT 32 - #define ATH79_MISC_IRQ(_x) (ATH79_MISC_IRQ_BASE + (_x)) -@@ -24,13 +26,6 @@ - #define ATH79_IP2_IRQ_COUNT 2 - #define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x)) - --#define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2) --#define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3) --#define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4) --#define ATH79_CPU_IRQ_GE1 (MIPS_CPU_IRQ_BASE + 5) --#define ATH79_CPU_IRQ_MISC (MIPS_CPU_IRQ_BASE + 6) --#define ATH79_CPU_IRQ_TIMER (MIPS_CPU_IRQ_BASE + 7) -- - #define ATH79_MISC_IRQ_TIMER (ATH79_MISC_IRQ_BASE + 0) - #define ATH79_MISC_IRQ_ERROR (ATH79_MISC_IRQ_BASE + 1) - #define ATH79_MISC_IRQ_GPIO (ATH79_MISC_IRQ_BASE + 2) diff --git a/target/linux/ar71xx/patches-3.8/025-ath79-remove-ATH79_MISC_IRQ_-defines.patch b/target/linux/ar71xx/patches-3.8/025-ath79-remove-ATH79_MISC_IRQ_-defines.patch deleted file mode 100644 index 8278ad3..0000000 --- a/target/linux/ar71xx/patches-3.8/025-ath79-remove-ATH79_MISC_IRQ_-defines.patch +++ /dev/null @@ -1,85 +0,0 @@ -From f4414336ae509d20c043264bc9f8f6bafb0e8a6f Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 7 Feb 2013 19:32:24 +0000 -Subject: [PATCH] ath79: remove ATH79_MISC_IRQ_* defines - -commit fd633cf1cfe978003888dc78ff94f926fbe7dd8a upstream. - -Use the ATH79_MISC_IRQ() macro instead. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4930/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/dev-common.c | 6 +++--- - arch/mips/ath79/dev-usb.c | 2 +- - arch/mips/ath79/irq.c | 2 +- - arch/mips/include/asm/mach-ath79/irq.h | 13 ------------- - 4 files changed, 5 insertions(+), 18 deletions(-) - ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -36,7 +36,7 @@ static struct resource ath79_uart_resour - static struct plat_serial8250_port ath79_uart_data[] = { - { - .mapbase = AR71XX_UART_BASE, -- .irq = ATH79_MISC_IRQ_UART, -+ .irq = ATH79_MISC_IRQ(3), - .flags = AR71XX_UART_FLAGS, - .iotype = UPIO_MEM32, - .regshift = 2, -@@ -62,8 +62,8 @@ static struct resource ar933x_uart_resou - .flags = IORESOURCE_MEM, - }, - { -- .start = ATH79_MISC_IRQ_UART, -- .end = ATH79_MISC_IRQ_UART, -+ .start = ATH79_MISC_IRQ(3), -+ .end = ATH79_MISC_IRQ(3), - .flags = IORESOURCE_IRQ, - }, - }; ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -107,7 +107,7 @@ static void __init ath79_usb_setup(void) - mdelay(900); - - ath79_usb_init_resource(ath79_ohci_resources, AR71XX_OHCI_BASE, -- AR71XX_OHCI_SIZE, ATH79_MISC_IRQ_OHCI); -+ AR71XX_OHCI_SIZE, ATH79_MISC_IRQ(6)); - platform_device_register(&ath79_ohci_device); - - ath79_usb_init_resource(ath79_ehci_resources, AR71XX_EHCI_BASE, ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -265,7 +265,7 @@ void __init arch_init_irq(void) - BUG(); - } - -- cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC; -+ cp0_perfcount_irq = ATH79_MISC_IRQ(5); - mips_cpu_irq_init(); - ath79_misc_irq_init(); - ---- a/arch/mips/include/asm/mach-ath79/irq.h -+++ b/arch/mips/include/asm/mach-ath79/irq.h -@@ -26,19 +26,6 @@ - #define ATH79_IP2_IRQ_COUNT 2 - #define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x)) - --#define ATH79_MISC_IRQ_TIMER (ATH79_MISC_IRQ_BASE + 0) --#define ATH79_MISC_IRQ_ERROR (ATH79_MISC_IRQ_BASE + 1) --#define ATH79_MISC_IRQ_GPIO (ATH79_MISC_IRQ_BASE + 2) --#define ATH79_MISC_IRQ_UART (ATH79_MISC_IRQ_BASE + 3) --#define ATH79_MISC_IRQ_WDOG (ATH79_MISC_IRQ_BASE + 4) --#define ATH79_MISC_IRQ_PERFC (ATH79_MISC_IRQ_BASE + 5) --#define ATH79_MISC_IRQ_OHCI (ATH79_MISC_IRQ_BASE + 6) --#define ATH79_MISC_IRQ_DMA (ATH79_MISC_IRQ_BASE + 7) --#define ATH79_MISC_IRQ_TIMER2 (ATH79_MISC_IRQ_BASE + 8) --#define ATH79_MISC_IRQ_TIMER3 (ATH79_MISC_IRQ_BASE + 9) --#define ATH79_MISC_IRQ_TIMER4 (ATH79_MISC_IRQ_BASE + 10) --#define ATH79_MISC_IRQ_ETHSW (ATH79_MISC_IRQ_BASE + 12) -- - #include_next <irq.h> - - #endif /* __ASM_MACH_ATH79_IRQ_H */ diff --git a/target/linux/ar71xx/patches-3.8/026-MIPS-ath79-use-dynamically-allocated-USB-platform-de.patch b/target/linux/ar71xx/patches-3.8/026-MIPS-ath79-use-dynamically-allocated-USB-platform-de.patch deleted file mode 100644 index e7770cc..0000000 --- a/target/linux/ar71xx/patches-3.8/026-MIPS-ath79-use-dynamically-allocated-USB-platform-de.patch +++ /dev/null @@ -1,205 +0,0 @@ -From 9c3c3f7be27c88b59359e743be0437eb6f9af41f Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sat, 9 Feb 2013 17:57:52 +0000 -Subject: [PATCH] MIPS: ath79: use dynamically allocated USB platform devices - -commit 90a938d1add4859ad3e43c3dd5ee54bd0627e42d upstream. - -The current code uses static resources and static platform -device instances for the possible USB controllers in the -system. These static variables contains initial values which -leads to data segment pollution. - -Remove the static variables and use dynamically allocated -structures instead. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4933/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/dev-usb.c | 111 +++++++++++++++++++++------------------------ - 1 file changed, 51 insertions(+), 60 deletions(-) - ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -25,29 +25,11 @@ - #include "common.h" - #include "dev-usb.h" - --static struct resource ath79_ohci_resources[2]; -- --static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32); -+static u64 ath79_usb_dmamask = DMA_BIT_MASK(32); - - static struct usb_ohci_pdata ath79_ohci_pdata = { - }; - --static struct platform_device ath79_ohci_device = { -- .name = "ohci-platform", -- .id = -1, -- .resource = ath79_ohci_resources, -- .num_resources = ARRAY_SIZE(ath79_ohci_resources), -- .dev = { -- .dma_mask = &ath79_ohci_dmamask, -- .coherent_dma_mask = DMA_BIT_MASK(32), -- .platform_data = &ath79_ohci_pdata, -- }, --}; -- --static struct resource ath79_ehci_resources[2]; -- --static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32); -- - static struct usb_ehci_pdata ath79_ehci_pdata_v1 = { - .has_synopsys_hc_bug = 1, - }; -@@ -57,22 +39,16 @@ static struct usb_ehci_pdata ath79_ehci_ - .has_tt = 1, - }; - --static struct platform_device ath79_ehci_device = { -- .name = "ehci-platform", -- .id = -1, -- .resource = ath79_ehci_resources, -- .num_resources = ARRAY_SIZE(ath79_ehci_resources), -- .dev = { -- .dma_mask = &ath79_ehci_dmamask, -- .coherent_dma_mask = DMA_BIT_MASK(32), -- }, --}; -- --static void __init ath79_usb_init_resource(struct resource res[2], -- unsigned long base, -- unsigned long size, -- int irq) -+static void __init ath79_usb_register(const char *name, int id, -+ unsigned long base, unsigned long size, -+ int irq, const void *data, -+ size_t data_size) - { -+ struct resource res[2]; -+ struct platform_device *pdev; -+ -+ memset(res, 0, sizeof(res)); -+ - res[0].flags = IORESOURCE_MEM; - res[0].start = base; - res[0].end = base + size - 1; -@@ -80,6 +56,19 @@ static void __init ath79_usb_init_resour - res[1].flags = IORESOURCE_IRQ; - res[1].start = irq; - res[1].end = irq; -+ -+ pdev = platform_device_register_resndata(NULL, name, id, -+ res, ARRAY_SIZE(res), -+ data, data_size); -+ -+ if (IS_ERR(pdev)) { -+ pr_err("ath79: unable to register USB at %08lx, err=%d\n", -+ base, (int) PTR_ERR(pdev)); -+ return; -+ } -+ -+ pdev->dev.dma_mask = &ath79_usb_dmamask; -+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - } - - #define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \ -@@ -106,14 +95,15 @@ static void __init ath79_usb_setup(void) - - mdelay(900); - -- ath79_usb_init_resource(ath79_ohci_resources, AR71XX_OHCI_BASE, -- AR71XX_OHCI_SIZE, ATH79_MISC_IRQ(6)); -- platform_device_register(&ath79_ohci_device); -- -- ath79_usb_init_resource(ath79_ehci_resources, AR71XX_EHCI_BASE, -- AR71XX_EHCI_SIZE, ATH79_CPU_IRQ(3)); -- ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1; -- platform_device_register(&ath79_ehci_device); -+ ath79_usb_register("ohci-platform", -1, -+ AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE, -+ ATH79_MISC_IRQ(6), -+ &ath79_ohci_pdata, sizeof(ath79_ohci_pdata)); -+ -+ ath79_usb_register("ehci-platform", -1, -+ AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE, -+ ATH79_CPU_IRQ(3), -+ &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1)); - } - - static void __init ar7240_usb_setup(void) -@@ -135,9 +125,10 @@ static void __init ar7240_usb_setup(void - - iounmap(usb_ctrl_base); - -- ath79_usb_init_resource(ath79_ohci_resources, AR7240_OHCI_BASE, -- AR7240_OHCI_SIZE, ATH79_CPU_IRQ(3)); -- platform_device_register(&ath79_ohci_device); -+ ath79_usb_register("ohci-platform", -1, -+ AR7240_OHCI_BASE, AR7240_OHCI_SIZE, -+ ATH79_CPU_IRQ(3), -+ &ath79_ohci_pdata, sizeof(ath79_ohci_pdata)); - } - - static void __init ar724x_usb_setup(void) -@@ -151,10 +142,10 @@ static void __init ar724x_usb_setup(void - ath79_device_reset_clear(AR724X_RESET_USB_PHY); - mdelay(10); - -- ath79_usb_init_resource(ath79_ehci_resources, AR724X_EHCI_BASE, -- AR724X_EHCI_SIZE, ATH79_CPU_IRQ(3)); -- ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; -- platform_device_register(&ath79_ehci_device); -+ ath79_usb_register("ehci-platform", -1, -+ AR724X_EHCI_BASE, AR724X_EHCI_SIZE, -+ ATH79_CPU_IRQ(3), -+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - - static void __init ar913x_usb_setup(void) -@@ -168,10 +159,10 @@ static void __init ar913x_usb_setup(void - ath79_device_reset_clear(AR913X_RESET_USB_PHY); - mdelay(10); - -- ath79_usb_init_resource(ath79_ehci_resources, AR913X_EHCI_BASE, -- AR913X_EHCI_SIZE, ATH79_CPU_IRQ(3)); -- ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; -- platform_device_register(&ath79_ehci_device); -+ ath79_usb_register("ehci-platform", -1, -+ AR913X_EHCI_BASE, AR913X_EHCI_SIZE, -+ ATH79_CPU_IRQ(3), -+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - - static void __init ar933x_usb_setup(void) -@@ -185,10 +176,10 @@ static void __init ar933x_usb_setup(void - ath79_device_reset_clear(AR933X_RESET_USB_PHY); - mdelay(10); - -- ath79_usb_init_resource(ath79_ehci_resources, AR933X_EHCI_BASE, -- AR933X_EHCI_SIZE, ATH79_CPU_IRQ(3)); -- ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; -- platform_device_register(&ath79_ehci_device); -+ ath79_usb_register("ehci-platform", -1, -+ AR933X_EHCI_BASE, AR933X_EHCI_SIZE, -+ ATH79_CPU_IRQ(3), -+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - - static void __init ar934x_usb_setup(void) -@@ -211,10 +202,10 @@ static void __init ar934x_usb_setup(void - ath79_device_reset_clear(AR934X_RESET_USB_HOST); - udelay(1000); - -- ath79_usb_init_resource(ath79_ehci_resources, AR934X_EHCI_BASE, -- AR934X_EHCI_SIZE, ATH79_CPU_IRQ(3)); -- ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; -- platform_device_register(&ath79_ehci_device); -+ ath79_usb_register("ehci-platform", -1, -+ AR934X_EHCI_BASE, AR934X_EHCI_SIZE, -+ ATH79_CPU_IRQ(3), -+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - - void __init ath79_register_usb(void) diff --git a/target/linux/ar71xx/patches-3.8/027-MIPS-ath79-fix-WMAC-IRQ-resource-assignment.patch b/target/linux/ar71xx/patches-3.8/027-MIPS-ath79-fix-WMAC-IRQ-resource-assignment.patch deleted file mode 100644 index 97065d5..0000000 --- a/target/linux/ar71xx/patches-3.8/027-MIPS-ath79-fix-WMAC-IRQ-resource-assignment.patch +++ /dev/null @@ -1,29 +0,0 @@ -From acb28a2a03a93e351e26230511a9f38d0da62fdd Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 18:51:57 +0000 -Subject: [PATCH] MIPS: ath79: fix WMAC IRQ resource assignment - -commit e3b25cead4b58fbf60270ba73a1669bf9e5635f5 upstream. - -The '.start' field of the IRQ resource assigned twice -in ar934x_wmac_setup(). The second assignment must -set the '.end' field. Fix it. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4954/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/dev-wmac.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -107,7 +107,7 @@ static void ar934x_wmac_setup(void) - ath79_wmac_resources[0].start = AR934X_WMAC_BASE; - ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1; - ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); -- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); -+ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); - - t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); - if (t & AR934X_BOOTSTRAP_REF_CLK_40) diff --git a/target/linux/ar71xx/patches-3.8/028-MIPS-ath79-add-early-printk-support-for-the-QCA955X-.patch b/target/linux/ar71xx/patches-3.8/028-MIPS-ath79-add-early-printk-support-for-the-QCA955X-.patch deleted file mode 100644 index 38d735b..0000000 --- a/target/linux/ar71xx/patches-3.8/028-MIPS-ath79-add-early-printk-support-for-the-QCA955X-.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 8a4de56e3b7a6fbb777c78f87142bafc22c32ac2 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 13:38:15 +0000 -Subject: [PATCH] MIPS: ath79: add early printk support for the QCA955X SoCs - -commit 908987797076b848f01b32c21d61d0e152efc236 upstream. - -The patch allows to see kernel messages on the -QCA955X SoCs in early boot stage. - -Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> -Cc: Giori, Kathy <kgiori@qca.qualcomm.com> -Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4944/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/early_printk.c | 2 ++ - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++ - 2 files changed, 4 insertions(+) - ---- a/arch/mips/ath79/early_printk.c -+++ b/arch/mips/ath79/early_printk.c -@@ -74,6 +74,8 @@ static void prom_putchar_init(void) - case REV_ID_MAJOR_AR9341: - case REV_ID_MAJOR_AR9342: - case REV_ID_MAJOR_AR9344: -+ case REV_ID_MAJOR_QCA9556: -+ case REV_ID_MAJOR_QCA9558: - _prom_putchar = prom_putchar_ar71xx; - break; - ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -370,6 +370,8 @@ - #define REV_ID_MAJOR_AR9341 0x0120 - #define REV_ID_MAJOR_AR9342 0x1120 - #define REV_ID_MAJOR_AR9344 0x2120 -+#define REV_ID_MAJOR_QCA9556 0x0130 -+#define REV_ID_MAJOR_QCA9558 0x1130 - - #define AR71XX_REV_ID_MINOR_MASK 0x3 - #define AR71XX_REV_ID_MINOR_AR7130 0x0 diff --git a/target/linux/ar71xx/patches-3.8/029-MIPS-ath79-add-SoC-detection-code-for-the-QCA955X-So.patch b/target/linux/ar71xx/patches-3.8/029-MIPS-ath79-add-SoC-detection-code-for-the-QCA955X-So.patch deleted file mode 100644 index 5a60ffe..0000000 --- a/target/linux/ar71xx/patches-3.8/029-MIPS-ath79-add-SoC-detection-code-for-the-QCA955X-So.patch +++ /dev/null @@ -1,113 +0,0 @@ -From f48780829e9de625cb7fa0850fc31d050da6adeb Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 13:38:16 +0000 -Subject: [PATCH] MIPS: ath79: add SoC detection code for the QCA955X SoCs - -commit 2e6c91e392fd7be2ef0ba1e9a20e0ebe8ab79cf3 upstream. - -Also add 'soc_is_qca955[68x]' helper functions -and a Kconfig symbol for the SoC family. - -Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> -Cc: Giori, Kathy <kgiori@qca.qualcomm.com> -Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4943/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/Kconfig | 4 ++++ - arch/mips/ath79/setup.c | 18 +++++++++++++++++- - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++ - arch/mips/include/asm/mach-ath79/ath79.h | 17 +++++++++++++++++ - 4 files changed, 40 insertions(+), 1 deletion(-) - ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -88,6 +88,10 @@ config SOC_AR934X - select PCI_AR724X if PCI - def_bool n - -+config SOC_QCA955X -+ select USB_ARCH_HAS_EHCI -+ def_bool n -+ - config PCI_AR724X - def_bool n - ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -164,13 +164,29 @@ static void __init ath79_detect_sys_type - rev = id & AR934X_REV_ID_REVISION_MASK; - break; - -+ case REV_ID_MAJOR_QCA9556: -+ ath79_soc = ATH79_SOC_QCA9556; -+ chip = "9556"; -+ rev = id & QCA955X_REV_ID_REVISION_MASK; -+ break; -+ -+ case REV_ID_MAJOR_QCA9558: -+ ath79_soc = ATH79_SOC_QCA9558; -+ chip = "9558"; -+ rev = id & QCA955X_REV_ID_REVISION_MASK; -+ break; -+ - default: - panic("ath79: unknown SoC, id:0x%08x", id); - } - - ath79_soc_rev = rev; - -- sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); -+ if (soc_is_qca955x()) -+ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u", -+ chip, rev); -+ else -+ sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); - pr_info("SoC: %s\n", ath79_sys_type); - } - ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -392,6 +392,8 @@ - - #define AR934X_REV_ID_REVISION_MASK 0xf - -+#define QCA955X_REV_ID_REVISION_MASK 0xf -+ - /* - * SPI block - */ ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -32,6 +32,8 @@ enum ath79_soc_type { - ATH79_SOC_AR9341, - ATH79_SOC_AR9342, - ATH79_SOC_AR9344, -+ ATH79_SOC_QCA9556, -+ ATH79_SOC_QCA9558, - }; - - extern enum ath79_soc_type ath79_soc; -@@ -98,6 +100,21 @@ static inline int soc_is_ar934x(void) - return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344(); - } - -+static inline int soc_is_qca9556(void) -+{ -+ return ath79_soc == ATH79_SOC_QCA9556; -+} -+ -+static inline int soc_is_qca9558(void) -+{ -+ return ath79_soc == ATH79_SOC_QCA9558; -+} -+ -+static inline int soc_is_qca955x(void) -+{ -+ return soc_is_qca9556() || soc_is_qca9558(); -+} -+ - extern void __iomem *ath79_ddr_base; - extern void __iomem *ath79_pll_base; - extern void __iomem *ath79_reset_base; diff --git a/target/linux/ar71xx/patches-3.8/030-MIPS-ath79-add-clock-setup-code-for-the-QCA955X-SoCs.patch b/target/linux/ar71xx/patches-3.8/030-MIPS-ath79-add-clock-setup-code-for-the-QCA955X-SoCs.patch deleted file mode 100644 index e1d4bfc..0000000 --- a/target/linux/ar71xx/patches-3.8/030-MIPS-ath79-add-clock-setup-code-for-the-QCA955X-SoCs.patch +++ /dev/null @@ -1,177 +0,0 @@ -From 64d8592fd1f7265de8b31dbf294928eaf9983db5 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 13:38:17 +0000 -Subject: [PATCH] MIPS: ath79: add clock setup code for the QCA955X SoCs - -commit 41583c05c15cd3adb848f9ee8316bf8084c961cb upstream. - -The patch adds code to get various clock frequencies -from the PLLs used in the QCA955x SoCs. - -Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> -Cc: Giori, Kathy <kgiori@qca.qualcomm.com> -Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4945/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++ - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 39 ++++++++++++ - 2 files changed, 117 insertions(+) - ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -295,6 +295,82 @@ static void __init ar934x_clocks_init(vo - iounmap(dpll_base); - } - -+static void __init qca955x_clocks_init(void) -+{ -+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; -+ u32 cpu_pll, ddr_pll; -+ u32 bootstrap; -+ -+ bootstrap = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP); -+ if (bootstrap & QCA955X_BOOTSTRAP_REF_CLK_40) -+ ath79_ref_clk.rate = 40 * 1000 * 1000; -+ else -+ ath79_ref_clk.rate = 25 * 1000 * 1000; -+ -+ pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG); -+ out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & -+ QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) & -+ QCA955X_PLL_CPU_CONFIG_REFDIV_MASK; -+ nint = (pll >> QCA955X_PLL_CPU_CONFIG_NINT_SHIFT) & -+ QCA955X_PLL_CPU_CONFIG_NINT_MASK; -+ frac = (pll >> QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT) & -+ QCA955X_PLL_CPU_CONFIG_NFRAC_MASK; -+ -+ cpu_pll = nint * ath79_ref_clk.rate / ref_div; -+ cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6)); -+ cpu_pll /= (1 << out_div); -+ -+ pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG); -+ out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & -+ QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) & -+ QCA955X_PLL_DDR_CONFIG_REFDIV_MASK; -+ nint = (pll >> QCA955X_PLL_DDR_CONFIG_NINT_SHIFT) & -+ QCA955X_PLL_DDR_CONFIG_NINT_MASK; -+ frac = (pll >> QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT) & -+ QCA955X_PLL_DDR_CONFIG_NFRAC_MASK; -+ -+ ddr_pll = nint * ath79_ref_clk.rate / ref_div; -+ ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10)); -+ ddr_pll /= (1 << out_div); -+ -+ clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG); -+ -+ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & -+ QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS) -+ ath79_cpu_clk.rate = ath79_ref_clk.rate; -+ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL) -+ ath79_cpu_clk.rate = ddr_pll / (postdiv + 1); -+ else -+ ath79_cpu_clk.rate = cpu_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & -+ QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS) -+ ath79_ddr_clk.rate = ath79_ref_clk.rate; -+ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL) -+ ath79_ddr_clk.rate = cpu_pll / (postdiv + 1); -+ else -+ ath79_ddr_clk.rate = ddr_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & -+ QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS) -+ ath79_ahb_clk.rate = ath79_ref_clk.rate; -+ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) -+ ath79_ahb_clk.rate = ddr_pll / (postdiv + 1); -+ else -+ ath79_ahb_clk.rate = cpu_pll / (postdiv + 1); -+ -+ ath79_wdt_clk.rate = ath79_ref_clk.rate; -+ ath79_uart_clk.rate = ath79_ref_clk.rate; -+} -+ - void __init ath79_clocks_init(void) - { - if (soc_is_ar71xx()) -@@ -307,6 +383,8 @@ void __init ath79_clocks_init(void) - ar933x_clocks_init(); - else if (soc_is_ar934x()) - ar934x_clocks_init(); -+ else if (soc_is_qca955x()) -+ qca955x_clocks_init(); - else - BUG(); - ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -225,6 +225,41 @@ - #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) - #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -+#define QCA955X_PLL_CPU_CONFIG_REG 0x00 -+#define QCA955X_PLL_DDR_CONFIG_REG 0x04 -+#define QCA955X_PLL_CLK_CTRL_REG 0x08 -+ -+#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 -+#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -+#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT 6 -+#define QCA955X_PLL_CPU_CONFIG_NINT_MASK 0x3f -+#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -+#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -+#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -+#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 -+ -+#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 -+#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff -+#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT 10 -+#define QCA955X_PLL_DDR_CONFIG_NINT_MASK 0x3f -+#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -+#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -+#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -+#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 -+ -+#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -+#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -+#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -+#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -+#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -+#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -+#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -+#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -+#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -+#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) -+#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) -+#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) -+ - /* - * USB_CONFIG block - */ -@@ -264,6 +299,8 @@ - #define AR934X_RESET_REG_BOOTSTRAP 0xb0 - #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac - -+#define QCA955X_RESET_REG_BOOTSTRAP 0xb0 -+ - #define MISC_INT_ETHSW BIT(12) - #define MISC_INT_TIMER4 BIT(10) - #define MISC_INT_TIMER3 BIT(9) -@@ -341,6 +378,8 @@ - #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) - #define AR934X_BOOTSTRAP_DDR1 BIT(0) - -+#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) -+ - #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) - #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) - #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) diff --git a/target/linux/ar71xx/patches-3.8/031-MIPS-ath79-add-IRQ-handling-code-for-the-QCA955X-SoC.patch b/target/linux/ar71xx/patches-3.8/031-MIPS-ath79-add-IRQ-handling-code-for-the-QCA955X-SoC.patch deleted file mode 100644 index dd79fa9..0000000 --- a/target/linux/ar71xx/patches-3.8/031-MIPS-ath79-add-IRQ-handling-code-for-the-QCA955X-SoC.patch +++ /dev/null @@ -1,246 +0,0 @@ -From f1c0239d61d6d43469133d144e458f485b6cbda6 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 18:53:47 +0000 -Subject: [PATCH] MIPS: ath79: add IRQ handling code for the QCA955X SoCs - -commit 53330332f176eaa9567481c69bbad8b2176b4eb5 upstream. - -The IRQ routing in the QCA955x SoCs is slightly -different from the routing implemented in the -already supported SoCs. - -Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> -Cc: Giori, Kathy <kgiori@qca.qualcomm.com> -Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4955/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/irq.c | 110 ++++++++++++++++++++++-- - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 32 +++++++ - arch/mips/include/asm/mach-ath79/irq.h | 6 +- - 3 files changed, 140 insertions(+), 8 deletions(-) - ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -103,7 +103,10 @@ static void __init ath79_misc_irq_init(v - - if (soc_is_ar71xx() || soc_is_ar913x()) - ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask; -- else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x()) -+ else if (soc_is_ar724x() || -+ soc_is_ar933x() || -+ soc_is_ar934x() || -+ soc_is_qca955x()) - ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; - else - BUG(); -@@ -150,6 +153,88 @@ static void ar934x_ip2_irq_init(void) - irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); - } - -+static void qca955x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc) -+{ -+ u32 status; -+ -+ disable_irq_nosync(irq); -+ -+ status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS); -+ status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL; -+ -+ if (status == 0) { -+ spurious_interrupt(); -+ goto enable; -+ } -+ -+ if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP2_IRQ(0)); -+ } -+ -+ if (status & QCA955X_EXT_INT_WMAC_ALL) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP2_IRQ(1)); -+ } -+ -+enable: -+ enable_irq(irq); -+} -+ -+static void qca955x_ip3_irq_dispatch(unsigned int irq, struct irq_desc *desc) -+{ -+ u32 status; -+ -+ disable_irq_nosync(irq); -+ -+ status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS); -+ status &= QCA955X_EXT_INT_PCIE_RC2_ALL | -+ QCA955X_EXT_INT_USB1 | -+ QCA955X_EXT_INT_USB2; -+ -+ if (status == 0) { -+ spurious_interrupt(); -+ goto enable; -+ } -+ -+ if (status & QCA955X_EXT_INT_USB1) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP3_IRQ(0)); -+ } -+ -+ if (status & QCA955X_EXT_INT_USB2) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP3_IRQ(1)); -+ } -+ -+ if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP3_IRQ(2)); -+ } -+ -+enable: -+ enable_irq(irq); -+} -+ -+static void qca955x_irq_init(void) -+{ -+ int i; -+ -+ for (i = ATH79_IP2_IRQ_BASE; -+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -+ irq_set_chip_and_handler(i, &dummy_irq_chip, -+ handle_level_irq); -+ -+ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch); -+ -+ for (i = ATH79_IP3_IRQ_BASE; -+ i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) -+ irq_set_chip_and_handler(i, &dummy_irq_chip, -+ handle_level_irq); -+ -+ irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); -+} -+ - asmlinkage void plat_irq_dispatch(void) - { - unsigned long pending; -@@ -185,6 +270,17 @@ asmlinkage void plat_irq_dispatch(void) - * Issue a flush in the handlers to ensure that the driver sees - * the update. - */ -+ -+static void ath79_default_ip2_handler(void) -+{ -+ do_IRQ(ATH79_CPU_IRQ(2)); -+} -+ -+static void ath79_default_ip3_handler(void) -+{ -+ do_IRQ(ATH79_CPU_IRQ(3)); -+} -+ - static void ar71xx_ip2_handler(void) - { - ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI); -@@ -209,11 +305,6 @@ static void ar933x_ip2_handler(void) - do_IRQ(ATH79_CPU_IRQ(2)); - } - --static void ar934x_ip2_handler(void) --{ -- do_IRQ(ATH79_CPU_IRQ(2)); --} -- - static void ar71xx_ip3_handler(void) - { - ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB); -@@ -259,8 +350,11 @@ void __init arch_init_irq(void) - ath79_ip2_handler = ar933x_ip2_handler; - ath79_ip3_handler = ar933x_ip3_handler; - } else if (soc_is_ar934x()) { -- ath79_ip2_handler = ar934x_ip2_handler; -+ ath79_ip2_handler = ath79_default_ip2_handler; - ath79_ip3_handler = ar934x_ip3_handler; -+ } else if (soc_is_qca955x()) { -+ ath79_ip2_handler = ath79_default_ip2_handler; -+ ath79_ip3_handler = ath79_default_ip3_handler; - } else { - BUG(); - } -@@ -271,4 +365,6 @@ void __init arch_init_irq(void) - - if (soc_is_ar934x()) - ar934x_ip2_irq_init(); -+ else if (soc_is_qca955x()) -+ qca955x_irq_init(); - } ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -300,6 +300,7 @@ - #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac - - #define QCA955X_RESET_REG_BOOTSTRAP 0xb0 -+#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac - - #define MISC_INT_ETHSW BIT(12) - #define MISC_INT_TIMER4 BIT(10) -@@ -398,6 +399,37 @@ - AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ - AR934X_PCIE_WMAC_INT_PCIE_RC3) - -+#define QCA955X_EXT_INT_WMAC_MISC BIT(0) -+#define QCA955X_EXT_INT_WMAC_TX BIT(1) -+#define QCA955X_EXT_INT_WMAC_RXLP BIT(2) -+#define QCA955X_EXT_INT_WMAC_RXHP BIT(3) -+#define QCA955X_EXT_INT_PCIE_RC1 BIT(4) -+#define QCA955X_EXT_INT_PCIE_RC1_INT0 BIT(5) -+#define QCA955X_EXT_INT_PCIE_RC1_INT1 BIT(6) -+#define QCA955X_EXT_INT_PCIE_RC1_INT2 BIT(7) -+#define QCA955X_EXT_INT_PCIE_RC1_INT3 BIT(8) -+#define QCA955X_EXT_INT_PCIE_RC2 BIT(12) -+#define QCA955X_EXT_INT_PCIE_RC2_INT0 BIT(13) -+#define QCA955X_EXT_INT_PCIE_RC2_INT1 BIT(14) -+#define QCA955X_EXT_INT_PCIE_RC2_INT2 BIT(15) -+#define QCA955X_EXT_INT_PCIE_RC2_INT3 BIT(16) -+#define QCA955X_EXT_INT_USB1 BIT(24) -+#define QCA955X_EXT_INT_USB2 BIT(28) -+ -+#define QCA955X_EXT_INT_WMAC_ALL \ -+ (QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \ -+ QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP) -+ -+#define QCA955X_EXT_INT_PCIE_RC1_ALL \ -+ (QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \ -+ QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \ -+ QCA955X_EXT_INT_PCIE_RC1_INT3) -+ -+#define QCA955X_EXT_INT_PCIE_RC2_ALL \ -+ (QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \ -+ QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \ -+ QCA955X_EXT_INT_PCIE_RC2_INT3) -+ - #define REV_ID_MAJOR_MASK 0xfff0 - #define REV_ID_MAJOR_AR71XX 0x00a0 - #define REV_ID_MAJOR_AR913X 0x00b0 ---- a/arch/mips/include/asm/mach-ath79/irq.h -+++ b/arch/mips/include/asm/mach-ath79/irq.h -@@ -10,7 +10,7 @@ - #define __ASM_MACH_ATH79_IRQ_H - - #define MIPS_CPU_IRQ_BASE 0 --#define NR_IRQS 48 -+#define NR_IRQS 51 - - #define ATH79_CPU_IRQ(_x) (MIPS_CPU_IRQ_BASE + (_x)) - -@@ -26,6 +26,10 @@ - #define ATH79_IP2_IRQ_COUNT 2 - #define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x)) - -+#define ATH79_IP3_IRQ_BASE (ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT) -+#define ATH79_IP3_IRQ_COUNT 3 -+#define ATH79_IP3_IRQ(_x) (ATH79_IP3_IRQ_BASE + (_x)) -+ - #include_next <irq.h> - - #endif /* __ASM_MACH_ATH79_IRQ_H */ diff --git a/target/linux/ar71xx/patches-3.8/032-MIPS-ath79-add-GPIO-setup-code-for-the-QCA955X-SoCs.patch b/target/linux/ar71xx/patches-3.8/032-MIPS-ath79-add-GPIO-setup-code-for-the-QCA955X-SoCs.patch deleted file mode 100644 index 538da3c..0000000 --- a/target/linux/ar71xx/patches-3.8/032-MIPS-ath79-add-GPIO-setup-code-for-the-QCA955X-SoCs.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 8817bcbbaf64d54bd4d06659cc77d1bfc9e53dad Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 13:38:19 +0000 -Subject: [PATCH] MIPS: ath79: add GPIO setup code for the QCA955X SoCs - -commit f818ca3e6894d4a630a1ecc673c91df8fb6f6898 upstream. - -The existing code can handle the GPIO controller of -the QCA955x SoCs. Add a minimal glue code to make it -working. - -Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> -Cc: Giori, Kathy <kgiori@qca.qualcomm.com> -Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4947/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/gpio.c | 4 +++- - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 + - 2 files changed, 4 insertions(+), 1 deletion(-) - ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -194,12 +194,14 @@ void __init ath79_gpio_init(void) - ath79_gpio_count = AR933X_GPIO_COUNT; - else if (soc_is_ar934x()) - ath79_gpio_count = AR934X_GPIO_COUNT; -+ else if (soc_is_qca955x()) -+ ath79_gpio_count = QCA955X_GPIO_COUNT; - else - BUG(); - - ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); - ath79_gpio_chip.ngpio = ath79_gpio_count; -- if (soc_is_ar934x()) { -+ if (soc_is_ar934x() || soc_is_qca955x()) { - ath79_gpio_chip.direction_input = ar934x_gpio_direction_input; - ath79_gpio_chip.direction_output = ar934x_gpio_direction_output; - } ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -510,6 +510,7 @@ - #define AR913X_GPIO_COUNT 22 - #define AR933X_GPIO_COUNT 30 - #define AR934X_GPIO_COUNT 23 -+#define QCA955X_GPIO_COUNT 24 - - /* - * SRIF block diff --git a/target/linux/ar71xx/patches-3.8/033-MIPS-ath79-add-QCA955X-specific-glue-to-ath79_device.patch b/target/linux/ar71xx/patches-3.8/033-MIPS-ath79-add-QCA955X-specific-glue-to-ath79_device.patch deleted file mode 100644 index 42877ff..0000000 --- a/target/linux/ar71xx/patches-3.8/033-MIPS-ath79-add-QCA955X-specific-glue-to-ath79_device.patch +++ /dev/null @@ -1,53 +0,0 @@ -From d3cc7a15c1e1a04e8d561c0b05d176434142bf9a Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 13:38:20 +0000 -Subject: [PATCH] MIPS: ath79: add QCA955X specific glue to - ath79_device_reset_{set, clear} - -commit 7d4c2af9bdbbe789fe4a93f32c5890d72cbf60a1 upstream. - -The ath79_device_reset_* are causing BUG when -those are used on the QCA955x SoCs. The patch -adds the required code to avoid that. - -Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> -Cc: Giori, Kathy <kgiori@qca.qualcomm.com> -Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4948/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/common.c | 4 ++++ - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 + - 2 files changed, 5 insertions(+) - ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -72,6 +72,8 @@ void ath79_device_reset_set(u32 mask) - reg = AR933X_RESET_REG_RESET_MODULE; - else if (soc_is_ar934x()) - reg = AR934X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca955x()) -+ reg = QCA955X_RESET_REG_RESET_MODULE; - else - BUG(); - -@@ -98,6 +100,8 @@ void ath79_device_reset_clear(u32 mask) - reg = AR933X_RESET_REG_RESET_MODULE; - else if (soc_is_ar934x()) - reg = AR934X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca955x()) -+ reg = QCA955X_RESET_REG_RESET_MODULE; - else - BUG(); - ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -299,6 +299,7 @@ - #define AR934X_RESET_REG_BOOTSTRAP 0xb0 - #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac - -+#define QCA955X_RESET_REG_RESET_MODULE 0x1c - #define QCA955X_RESET_REG_BOOTSTRAP 0xb0 - #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac - diff --git a/target/linux/ar71xx/patches-3.8/034-MIPS-ath79-register-UART-for-the-QCA955X-SoCs.patch b/target/linux/ar71xx/patches-3.8/034-MIPS-ath79-register-UART-for-the-QCA955X-SoCs.patch deleted file mode 100644 index 38acf45..0000000 --- a/target/linux/ar71xx/patches-3.8/034-MIPS-ath79-register-UART-for-the-QCA955X-SoCs.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 25320dbceda508afc5b2de1986072caa9e04ad1b Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 13:38:21 +0000 -Subject: [PATCH] MIPS: ath79: register UART for the QCA955X SoCs - -commit 13992303fa705ae1e4acf4660c69687672996029 upstream. - -Similarly to the preceding SoCs, the QCA955X SoCs -also have a built-in NS16650 compatible UART. -Register the platform device for that to make -it usable. - -Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> -Cc: Giori, Kathy <kgiori@qca.qualcomm.com> -Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4949/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/dev-common.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -90,7 +90,8 @@ void __init ath79_register_uart(void) - if (soc_is_ar71xx() || - soc_is_ar724x() || - soc_is_ar913x() || -- soc_is_ar934x()) { -+ soc_is_ar934x() || -+ soc_is_qca955x()) { - ath79_uart_data[0].uartclk = clk_get_rate(clk); - platform_device_register(&ath79_uart_device); - } else if (soc_is_ar933x()) { diff --git a/target/linux/ar71xx/patches-3.8/035-MIPS-ath79-add-WMAC-registration-code-for-the-QCA955.patch b/target/linux/ar71xx/patches-3.8/035-MIPS-ath79-add-WMAC-registration-code-for-the-QCA955.patch deleted file mode 100644 index d208fff..0000000 --- a/target/linux/ar71xx/patches-3.8/035-MIPS-ath79-add-WMAC-registration-code-for-the-QCA955.patch +++ /dev/null @@ -1,81 +0,0 @@ -From cf40fbb509eaa53ff787dce41911b2545bd001ea Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 18:54:33 +0000 -Subject: [PATCH] MIPS: ath79: add WMAC registration code for the QCA955X SoCs - -commit e9c0d0aaa3a7a6e66135e8b44f3323143a635098 upstream. - -The SoC has a built-in wireless MAC. Register a platform -device for that to make it usable with the ath9k driver. - -Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> -Cc: Giori, Kathy <kgiori@qca.qualcomm.com> -Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4956/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/Kconfig | 2 +- - arch/mips/ath79/dev-wmac.c | 20 ++++++++++++++++++++ - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 +++ - 3 files changed, 24 insertions(+), 1 deletion(-) - ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -108,7 +108,7 @@ config ATH79_DEV_USB - def_bool n - - config ATH79_DEV_WMAC -- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X) -+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) - def_bool n - - endif ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -116,6 +116,24 @@ static void ar934x_wmac_setup(void) - ath79_wmac_data.is_clk_25mhz = true; - } - -+static void qca955x_wmac_setup(void) -+{ -+ u32 t; -+ -+ ath79_wmac_device.name = "qca955x_wmac"; -+ -+ ath79_wmac_resources[0].start = QCA955X_WMAC_BASE; -+ ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1; -+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); -+ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); -+ -+ t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP); -+ if (t & QCA955X_BOOTSTRAP_REF_CLK_40) -+ ath79_wmac_data.is_clk_25mhz = false; -+ else -+ ath79_wmac_data.is_clk_25mhz = true; -+} -+ - void __init ath79_register_wmac(u8 *cal_data) - { - if (soc_is_ar913x()) -@@ -124,6 +142,8 @@ void __init ath79_register_wmac(u8 *cal_ - ar933x_wmac_setup(); - else if (soc_is_ar934x()) - ar934x_wmac_setup(); -+ else if (soc_is_qca955x()) -+ qca955x_wmac_setup(); - else - BUG(); - ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -94,6 +94,9 @@ - #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) - #define AR934X_SRIF_SIZE 0x1000 - -+#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -+#define QCA955X_WMAC_SIZE 0x20000 -+ - /* - * DDR_CTRL block - */ diff --git a/target/linux/ar71xx/patches-3.8/036-MIPS-ath79-add-PCI-controller-registration-code-for-.patch b/target/linux/ar71xx/patches-3.8/036-MIPS-ath79-add-PCI-controller-registration-code-for-.patch deleted file mode 100644 index c431f94..0000000 --- a/target/linux/ar71xx/patches-3.8/036-MIPS-ath79-add-PCI-controller-registration-code-for-.patch +++ /dev/null @@ -1,115 +0,0 @@ -From bc14333054c5ecee4bc7e8760d0ffbb730f32c54 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 13:38:23 +0000 -Subject: [PATCH] MIPS: ath79: add PCI controller registration code for the - QCA955X SoCs - -commit 0a5f3b1c9f20eb44142e3b37662de15c944f759d upstream. - -Add SoC specific PCI IRQ map, and register platform -devices for the two built-in PCIe RCs. - -Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> -Cc: Giori, Kathy <kgiori@qca.qualcomm.com> -Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4951/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/Kconfig | 2 ++ - arch/mips/ath79/pci.c | 36 ++++++++++++++++++++++++ - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 13 +++++++++ - 3 files changed, 51 insertions(+) - ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -90,6 +90,8 @@ config SOC_AR934X - - config SOC_QCA955X - select USB_ARCH_HAS_EHCI -+ select HW_HAS_PCI -+ select PCI_AR724X if PCI - def_bool n - - config PCI_AR724X ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -49,6 +49,21 @@ static const struct ath79_pci_irq ar724x - } - }; - -+static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = { -+ { -+ .bus = 0, -+ .slot = 0, -+ .pin = 1, -+ .irq = ATH79_PCI_IRQ(0), -+ }, -+ { -+ .bus = 1, -+ .slot = 0, -+ .pin = 1, -+ .irq = ATH79_PCI_IRQ(1), -+ }, -+}; -+ - int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) - { - int irq = -1; -@@ -64,6 +79,9 @@ int __init pcibios_map_irq(const struct - soc_is_ar9344()) { - ath79_pci_irq_map = ar724x_pci_irq_map; - ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map); -+ } else if (soc_is_qca955x()) { -+ ath79_pci_irq_map = qca955x_pci_irq_map; -+ ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map); - } else { - pr_crit("pci %s: invalid irq map\n", - pci_name((struct pci_dev *) dev)); -@@ -225,6 +243,24 @@ int __init ath79_register_pci(void) - AR724X_PCI_MEM_SIZE, - 0, - ATH79_IP2_IRQ(0)); -+ } else if (soc_is_qca9558()) { -+ pdev = ath79_register_pci_ar724x(0, -+ QCA955X_PCI_CFG_BASE0, -+ QCA955X_PCI_CTRL_BASE0, -+ QCA955X_PCI_CRP_BASE0, -+ QCA955X_PCI_MEM_BASE0, -+ QCA955X_PCI_MEM_SIZE, -+ 0, -+ ATH79_IP2_IRQ(0)); -+ -+ pdev = ath79_register_pci_ar724x(1, -+ QCA955X_PCI_CFG_BASE1, -+ QCA955X_PCI_CTRL_BASE1, -+ QCA955X_PCI_CRP_BASE1, -+ QCA955X_PCI_MEM_BASE1, -+ QCA955X_PCI_MEM_SIZE, -+ 1, -+ ATH79_IP3_IRQ(2)); - } else { - /* No PCI support */ - return -ENODEV; ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -94,6 +94,19 @@ - #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) - #define AR934X_SRIF_SIZE 0x1000 - -+#define QCA955X_PCI_MEM_BASE0 0x10000000 -+#define QCA955X_PCI_MEM_BASE1 0x12000000 -+#define QCA955X_PCI_MEM_SIZE 0x02000000 -+#define QCA955X_PCI_CFG_BASE0 0x14000000 -+#define QCA955X_PCI_CFG_BASE1 0x16000000 -+#define QCA955X_PCI_CFG_SIZE 0x1000 -+#define QCA955X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000) -+#define QCA955X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000) -+#define QCA955X_PCI_CRP_SIZE 0x1000 -+#define QCA955X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000) -+#define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) -+#define QCA955X_PCI_CTRL_SIZE 0x100 -+ - #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define QCA955X_WMAC_SIZE 0x20000 - diff --git a/target/linux/ar71xx/patches-3.8/037-MIPS-ath79-add-USB-controller-registration-code-for-.patch b/target/linux/ar71xx/patches-3.8/037-MIPS-ath79-add-USB-controller-registration-code-for-.patch deleted file mode 100644 index 15b7c75..0000000 --- a/target/linux/ar71xx/patches-3.8/037-MIPS-ath79-add-USB-controller-registration-code-for-.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 281db30007b5836ce8acf5a45160fde6b176eda4 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 13:38:24 +0000 -Subject: [PATCH] MIPS: ath79: add USB controller registration code for the - QCA955X SoCs - -commit 82c46840ae6bd8a147c59cd51f636d913989324a upstream. - -Register platfom devices for the built-in USB -controllers of the SoCs. - -Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> -Cc: Giori, Kathy <kgiori@qca.qualcomm.com> -Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4952/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/dev-usb.c | 15 +++++++++++++++ - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 +++ - 2 files changed, 18 insertions(+) - ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -208,6 +208,19 @@ static void __init ar934x_usb_setup(void - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - -+static void __init qca955x_usb_setup(void) -+{ -+ ath79_usb_register("ehci-platform", 0, -+ QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, -+ ATH79_IP3_IRQ(0), -+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -+ -+ ath79_usb_register("ehci-platform", 1, -+ QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE, -+ ATH79_IP3_IRQ(1), -+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -+} -+ - void __init ath79_register_usb(void) - { - if (soc_is_ar71xx()) -@@ -222,6 +235,8 @@ void __init ath79_register_usb(void) - ar933x_usb_setup(); - else if (soc_is_ar934x()) - ar934x_usb_setup(); -+ else if (soc_is_qca955x()) -+ qca955x_usb_setup(); - else - BUG(); - } ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -109,6 +109,9 @@ - - #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define QCA955X_WMAC_SIZE 0x20000 -+#define QCA955X_EHCI0_BASE 0x1b000000 -+#define QCA955X_EHCI1_BASE 0x1b400000 -+#define QCA955X_EHCI_SIZE 0x1000 - - /* - * DDR_CTRL block diff --git a/target/linux/ar71xx/patches-3.8/038-MIPS-ath79-add-support-for-the-Qualcomm-Atheros-AP13.patch b/target/linux/ar71xx/patches-3.8/038-MIPS-ath79-add-support-for-the-Qualcomm-Atheros-AP13.patch deleted file mode 100644 index e235570..0000000 --- a/target/linux/ar71xx/patches-3.8/038-MIPS-ath79-add-support-for-the-Qualcomm-Atheros-AP13.patch +++ /dev/null @@ -1,234 +0,0 @@ -From 7f8c0c731409b9c3e62fa8a6eb4830ace8568769 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 15 Feb 2013 13:38:25 +0000 -Subject: [PATCH] MIPS: ath79: add support for the Qualcomm Atheros AP136-010 - board - -commit 27ea052acb9eaca98cc90bf1b8738b6d0ea5bc2f upstream. - -Also enable the board in the default configuration. - -Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> -Cc: Giori, Kathy <kgiori@qca.qualcomm.com> -Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Patchwork: http://patchwork.linux-mips.org/patch/4953/ -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/ath79/Kconfig | 12 +++ - arch/mips/ath79/Makefile | 1 + - arch/mips/ath79/mach-ap136.c | 156 +++++++++++++++++++++++++++++++++++++ - arch/mips/ath79/machtypes.h | 1 + - arch/mips/configs/ath79_defconfig | 1 + - 5 files changed, 171 insertions(+) - create mode 100644 arch/mips/ath79/mach-ap136.c - ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -14,6 +14,18 @@ config ATH79_MACH_AP121 - Say 'Y' here if you want your kernel to support the - Atheros AP121 reference board. - -+config ATH79_MACH_AP136 -+ bool "Atheros AP136 reference board" -+ select SOC_QCA955X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_SPI -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP136 reference board. -+ - config ATH79_MACH_AP81 - bool "Atheros AP81 reference board" - select SOC_AR913X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -27,6 +27,7 @@ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wma - # Machines - # - obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o -+obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o - obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o - obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o - obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o ---- /dev/null -+++ b/arch/mips/ath79/mach-ap136.c -@@ -0,0 +1,156 @@ -+/* -+ * Qualcomm Atheros AP136 reference board support -+ * -+ * Copyright (c) 2012 Qualcomm Atheros -+ * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ * -+ */ -+ -+#include <linux/pci.h> -+#include <linux/ath9k_platform.h> -+ -+#include "machtypes.h" -+#include "dev-gpio-buttons.h" -+#include "dev-leds-gpio.h" -+#include "dev-spi.h" -+#include "dev-usb.h" -+#include "dev-wmac.h" -+#include "pci.h" -+ -+#define AP136_GPIO_LED_STATUS_RED 14 -+#define AP136_GPIO_LED_STATUS_GREEN 19 -+#define AP136_GPIO_LED_USB 4 -+#define AP136_GPIO_LED_WLAN_2G 13 -+#define AP136_GPIO_LED_WLAN_5G 12 -+#define AP136_GPIO_LED_WPS_RED 15 -+#define AP136_GPIO_LED_WPS_GREEN 20 -+ -+#define AP136_GPIO_BTN_WPS 16 -+#define AP136_GPIO_BTN_RFKILL 21 -+ -+#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ -+#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) -+ -+#define AP136_WMAC_CALDATA_OFFSET 0x1000 -+#define AP136_PCIE_CALDATA_OFFSET 0x5000 -+ -+static struct gpio_led ap136_leds_gpio[] __initdata = { -+ { -+ .name = "qca:green:status", -+ .gpio = AP136_GPIO_LED_STATUS_GREEN, -+ .active_low = 1, -+ }, -+ { -+ .name = "qca:red:status", -+ .gpio = AP136_GPIO_LED_STATUS_RED, -+ .active_low = 1, -+ }, -+ { -+ .name = "qca:green:wps", -+ .gpio = AP136_GPIO_LED_WPS_GREEN, -+ .active_low = 1, -+ }, -+ { -+ .name = "qca:red:wps", -+ .gpio = AP136_GPIO_LED_WPS_RED, -+ .active_low = 1, -+ }, -+ { -+ .name = "qca:red:wlan-2g", -+ .gpio = AP136_GPIO_LED_WLAN_2G, -+ .active_low = 1, -+ }, -+ { -+ .name = "qca:red:usb", -+ .gpio = AP136_GPIO_LED_USB, -+ .active_low = 1, -+ } -+}; -+ -+static struct gpio_keys_button ap136_gpio_keys[] __initdata = { -+ { -+ .desc = "WPS button", -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = AP136_GPIO_BTN_WPS, -+ .active_low = 1, -+ }, -+ { -+ .desc = "RFKILL button", -+ .type = EV_KEY, -+ .code = KEY_RFKILL, -+ .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = AP136_GPIO_BTN_RFKILL, -+ .active_low = 1, -+ }, -+}; -+ -+static struct spi_board_info ap136_spi_info[] = { -+ { -+ .bus_num = 0, -+ .chip_select = 0, -+ .max_speed_hz = 25000000, -+ .modalias = "mx25l6405d", -+ } -+}; -+ -+static struct ath79_spi_platform_data ap136_spi_data = { -+ .bus_num = 0, -+ .num_chipselect = 1, -+}; -+ -+#ifdef CONFIG_PCI -+static struct ath9k_platform_data ap136_ath9k_data; -+ -+static int ap136_pci_plat_dev_init(struct pci_dev *dev) -+{ -+ if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) -+ dev->dev.platform_data = &ap136_ath9k_data; -+ -+ return 0; -+} -+ -+static void __init ap136_pci_init(u8 *eeprom) -+{ -+ memcpy(ap136_ath9k_data.eeprom_data, eeprom, -+ sizeof(ap136_ath9k_data.eeprom_data)); -+ -+ ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); -+ ath79_register_pci(); -+} -+#else -+static inline void ap136_pci_init(void) {} -+#endif /* CONFIG_PCI */ -+ -+static void __init ap136_setup(void) -+{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), -+ ap136_leds_gpio); -+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ap136_gpio_keys), -+ ap136_gpio_keys); -+ ath79_register_spi(&ap136_spi_data, ap136_spi_info, -+ ARRAY_SIZE(ap136_spi_info)); -+ ath79_register_usb(); -+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); -+ ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); -+} -+ -+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", -+ "Atheros AP136-010 reference board", -+ ap136_setup); ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -17,6 +17,7 @@ - enum ath79_mach_type { - ATH79_MACH_GENERIC = 0, - ATH79_MACH_AP121, /* Atheros AP121 reference board */ -+ ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ ---- a/arch/mips/configs/ath79_defconfig -+++ b/arch/mips/configs/ath79_defconfig -@@ -1,5 +1,6 @@ - CONFIG_ATH79=y - CONFIG_ATH79_MACH_AP121=y -+CONFIG_ATH79_MACH_AP136=y - CONFIG_ATH79_MACH_AP81=y - CONFIG_ATH79_MACH_DB120=y - CONFIG_ATH79_MACH_PB44=y diff --git a/target/linux/ar71xx/patches-3.8/039-watchdog-ath79_wdt-convert-to-use-devm_clk_get.patch b/target/linux/ar71xx/patches-3.8/039-watchdog-ath79_wdt-convert-to-use-devm_clk_get.patch deleted file mode 100644 index e0b8d50..0000000 --- a/target/linux/ar71xx/patches-3.8/039-watchdog-ath79_wdt-convert-to-use-devm_clk_get.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 7ddf72f2337b5f7790994df966c26cd1180e1585 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 27 Dec 2012 15:38:24 +0100 -Subject: [PATCH] watchdog: ath79_wdt: convert to use devm_clk_get - -commit 5071a88475b758bf60191e53606463fe7290c71e upstream. - -Use the managed version of clk_get. This allows to -simplify the probe/remove functions a bit. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Signed-off-by: Wim Van Sebroeck <wim@iguana.be> ---- - drivers/watchdog/ath79_wdt.c | 7 ++----- - 1 file changed, 2 insertions(+), 5 deletions(-) - ---- a/drivers/watchdog/ath79_wdt.c -+++ b/drivers/watchdog/ath79_wdt.c -@@ -229,13 +229,13 @@ static int ath79_wdt_probe(struct platfo - u32 ctrl; - int err; - -- wdt_clk = clk_get(&pdev->dev, "wdt"); -+ wdt_clk = devm_clk_get(&pdev->dev, "wdt"); - if (IS_ERR(wdt_clk)) - return PTR_ERR(wdt_clk); - - err = clk_enable(wdt_clk); - if (err) -- goto err_clk_put; -+ return err; - - wdt_freq = clk_get_rate(wdt_clk); - if (!wdt_freq) { -@@ -265,8 +265,6 @@ static int ath79_wdt_probe(struct platfo - - err_clk_disable: - clk_disable(wdt_clk); --err_clk_put: -- clk_put(wdt_clk); - return err; - } - -@@ -274,7 +272,6 @@ static int ath79_wdt_remove(struct platf - { - misc_deregister(&ath79_wdt_miscdev); - clk_disable(wdt_clk); -- clk_put(wdt_clk); - return 0; - } - diff --git a/target/linux/ar71xx/patches-3.8/040-MIPS-ath79-use-dynamically-allocated-watchdog-device.patch b/target/linux/ar71xx/patches-3.8/040-MIPS-ath79-use-dynamically-allocated-watchdog-device.patch deleted file mode 100644 index 082195f..0000000 --- a/target/linux/ar71xx/patches-3.8/040-MIPS-ath79-use-dynamically-allocated-watchdog-device.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 5e25d5207d21e65b5a2e58b64aba6804653e95b8 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 27 Dec 2012 15:38:25 +0100 -Subject: [PATCH] MIPS: ath79: use dynamically allocated watchdog device - -commit 0f2ad9ed7c6fecb008372e8a709595a2a21059aa upstream. - -Remove the static watchdog device variable and use -the 'platform_device_register_simple' helper to -allocate and register the device in one step. - -This allows us to save a few bytes in the kernel image. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Signed-off-by: Wim Van Sebroeck <wim@iguana.be> ---- - arch/mips/ath79/dev-common.c | 7 +------ - 1 file changed, 1 insertion(+), 6 deletions(-) - ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -102,12 +102,7 @@ void __init ath79_register_uart(void) - } - } - --static struct platform_device ath79_wdt_device = { -- .name = "ath79-wdt", -- .id = -1, --}; -- - void __init ath79_register_wdt(void) - { -- platform_device_register(&ath79_wdt_device); -+ platform_device_register_simple("ath79-wdt", -1, NULL, 0); - } diff --git a/target/linux/ar71xx/patches-3.8/041-watchdog-ath79_wdt-get-register-base-from-platform-d.patch b/target/linux/ar71xx/patches-3.8/041-watchdog-ath79_wdt-get-register-base-from-platform-d.patch deleted file mode 100644 index b863829..0000000 --- a/target/linux/ar71xx/patches-3.8/041-watchdog-ath79_wdt-get-register-base-from-platform-d.patch +++ /dev/null @@ -1,151 +0,0 @@ -From 9c0785757dacd1aaf9e6e58b4f559e345093f1d4 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 27 Dec 2012 15:38:26 +0100 -Subject: [PATCH] watchdog: ath79_wdt: get register base from platform - device's resources - -commit 09f5100a592d11dad06b218f41d560ff1f87f666 upstream. - -The ath79_wdt driver uses a fixed memory address -currently. Although this is working with each -currently supported SoCs, but this may change -in the future. Additionally, the driver includes -platform specific header files in order to be -able to get the memory base of the watchdog -device. - -The patch adds a memory resource to the platform -device, and converts the driver to get the base -address of the watchdog device from that. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Signed-off-by: Wim Van Sebroeck <wim@iguana.be> ---- - arch/mips/ath79/dev-common.c | 10 ++++++++- - drivers/watchdog/ath79_wdt.c | 48 +++++++++++++++++++++++++++++++++--------- - 2 files changed, 47 insertions(+), 11 deletions(-) - ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -104,5 +104,13 @@ void __init ath79_register_uart(void) - - void __init ath79_register_wdt(void) - { -- platform_device_register_simple("ath79-wdt", -1, NULL, 0); -+ struct resource res; -+ -+ memset(&res, 0, sizeof(res)); -+ -+ res.flags = IORESOURCE_MEM; -+ res.start = AR71XX_RESET_BASE + AR71XX_RESET_REG_WDOG_CTRL; -+ res.end = res.start + 0x8 - 1; -+ -+ platform_device_register_simple("ath79-wdt", -1, &res, 1); - } ---- a/drivers/watchdog/ath79_wdt.c -+++ b/drivers/watchdog/ath79_wdt.c -@@ -23,6 +23,7 @@ - #include <linux/errno.h> - #include <linux/fs.h> - #include <linux/init.h> -+#include <linux/io.h> - #include <linux/kernel.h> - #include <linux/miscdevice.h> - #include <linux/module.h> -@@ -33,13 +34,13 @@ - #include <linux/clk.h> - #include <linux/err.h> - --#include <asm/mach-ath79/ath79.h> --#include <asm/mach-ath79/ar71xx_regs.h> -- - #define DRIVER_NAME "ath79-wdt" - - #define WDT_TIMEOUT 15 /* seconds */ - -+#define WDOG_REG_CTRL 0x00 -+#define WDOG_REG_TIMER 0x04 -+ - #define WDOG_CTRL_LAST_RESET BIT(31) - #define WDOG_CTRL_ACTION_MASK 3 - #define WDOG_CTRL_ACTION_NONE 0 /* no action */ -@@ -66,27 +67,38 @@ static struct clk *wdt_clk; - static unsigned long wdt_freq; - static int boot_status; - static int max_timeout; -+static void __iomem *wdt_base; -+ -+static inline void ath79_wdt_wr(unsigned reg, u32 val) -+{ -+ iowrite32(val, wdt_base + reg); -+} -+ -+static inline u32 ath79_wdt_rr(unsigned reg) -+{ -+ return ioread32(wdt_base + reg); -+} - - static inline void ath79_wdt_keepalive(void) - { -- ath79_reset_wr(AR71XX_RESET_REG_WDOG, wdt_freq * timeout); -+ ath79_wdt_wr(WDOG_REG_TIMER, wdt_freq * timeout); - /* flush write */ -- ath79_reset_rr(AR71XX_RESET_REG_WDOG); -+ ath79_wdt_rr(WDOG_REG_TIMER); - } - - static inline void ath79_wdt_enable(void) - { - ath79_wdt_keepalive(); -- ath79_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_FCR); -+ ath79_wdt_wr(WDOG_REG_CTRL, WDOG_CTRL_ACTION_FCR); - /* flush write */ -- ath79_reset_rr(AR71XX_RESET_REG_WDOG_CTRL); -+ ath79_wdt_rr(WDOG_REG_CTRL); - } - - static inline void ath79_wdt_disable(void) - { -- ath79_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_NONE); -+ ath79_wdt_wr(WDOG_REG_CTRL, WDOG_CTRL_ACTION_NONE); - /* flush write */ -- ath79_reset_rr(AR71XX_RESET_REG_WDOG_CTRL); -+ ath79_wdt_rr(WDOG_REG_CTRL); - } - - static int ath79_wdt_set_timeout(int val) -@@ -226,9 +238,25 @@ static struct miscdevice ath79_wdt_miscd - - static int ath79_wdt_probe(struct platform_device *pdev) - { -+ struct resource *res; - u32 ctrl; - int err; - -+ if (wdt_base) -+ return -EBUSY; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "no memory resource found\n"); -+ return -EINVAL; -+ } -+ -+ wdt_base = devm_request_and_ioremap(&pdev->dev, res); -+ if (!wdt_base) { -+ dev_err(&pdev->dev, "unable to remap memory region\n"); -+ return -ENOMEM; -+ } -+ - wdt_clk = devm_clk_get(&pdev->dev, "wdt"); - if (IS_ERR(wdt_clk)) - return PTR_ERR(wdt_clk); -@@ -251,7 +279,7 @@ static int ath79_wdt_probe(struct platfo - max_timeout, timeout); - } - -- ctrl = ath79_reset_rr(AR71XX_RESET_REG_WDOG_CTRL); -+ ctrl = ath79_wdt_rr(WDOG_REG_CTRL); - boot_status = (ctrl & WDOG_CTRL_LAST_RESET) ? WDIOF_CARDRESET : 0; - - err = misc_register(&ath79_wdt_miscdev); diff --git a/target/linux/ar71xx/patches-3.8/200-MIPS-ath79-fix-ar933x-watchdog-clock.patch b/target/linux/ar71xx/patches-3.8/200-MIPS-ath79-fix-ar933x-watchdog-clock.patch deleted file mode 100644 index b3a3cd3..0000000 --- a/target/linux/ar71xx/patches-3.8/200-MIPS-ath79-fix-ar933x-watchdog-clock.patch +++ /dev/null @@ -1,15 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Subject: [PATCH] MIPS: ath79: fix ar933x watchdog clock - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -164,7 +164,7 @@ static void __init ar933x_clocks_init(vo - ath79_ahb_clk.rate = freq / t; - } - -- ath79_wdt_clk.rate = ath79_ref_clk.rate; -+ ath79_wdt_clk.rate = ath79_ahb_clk.rate; - ath79_uart_clk.rate = ath79_ref_clk.rate; - } - diff --git a/target/linux/ar71xx/patches-3.8/206-spi-ath79-make-chipselect-logic-more-flexible.patch b/target/linux/ar71xx/patches-3.8/206-spi-ath79-make-chipselect-logic-more-flexible.patch deleted file mode 100644 index 93df466..0000000 --- a/target/linux/ar71xx/patches-3.8/206-spi-ath79-make-chipselect-logic-more-flexible.patch +++ /dev/null @@ -1,310 +0,0 @@ -From 7008284716403237f6bc7d7590b3ed073555bd56 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Wed, 11 Jan 2012 22:25:11 +0100 -Subject: [PATCH 34/34] spi/ath79: make chipselect logic more flexible - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> ---- - arch/mips/ath79/mach-ap121.c | 6 ++ - arch/mips/ath79/mach-ap136.c | 6 ++ - arch/mips/ath79/mach-ap81.c | 6 ++ - arch/mips/ath79/mach-db120.c | 6 ++ - arch/mips/ath79/mach-pb44.c | 6 ++ - arch/mips/ath79/mach-ubnt-xm.c | 6 ++ - .../include/asm/mach-ath79/ath79_spi_platform.h | 8 ++- - drivers/spi/spi-ath79.c | 67 +++++++++++++------- - 8 files changed, 88 insertions(+), 23 deletions(-) - ---- a/arch/mips/ath79/mach-ap121.c -+++ b/arch/mips/ath79/mach-ap121.c -@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi - } - }; - -+static struct ath79_spi_controller_data ap121_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info ap121_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "mx25l1606e", -+ .controller_data = &ap121_spi0_data, - } - }; - ---- a/arch/mips/ath79/mach-ap136.c -+++ b/arch/mips/ath79/mach-ap136.c -@@ -98,12 +98,18 @@ static struct gpio_keys_button ap136_gpi - }, - }; - -+static struct ath79_spi_controller_data ap136_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info ap136_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "mx25l6405d", -+ .controller_data = &ap136_spi0_data, - } - }; - ---- a/arch/mips/ath79/mach-ap81.c -+++ b/arch/mips/ath79/mach-ap81.c -@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio - } - }; - -+static struct ath79_spi_controller_data ap81_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info ap81_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p64", -+ .controller_data = &ap81_spi0_data, - } - }; - ---- a/arch/mips/ath79/mach-db120.c -+++ b/arch/mips/ath79/mach-db120.c -@@ -76,12 +76,18 @@ static struct gpio_keys_button db120_gpi - }, - }; - -+static struct ath79_spi_controller_data db120_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info db120_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "s25sl064a", -+ .controller_data = &db120_spi0_data, - } - }; - ---- a/arch/mips/ath79/mach-pb44.c -+++ b/arch/mips/ath79/mach-pb44.c -@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio - } - }; - -+static struct ath79_spi_controller_data pb44_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info pb44_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p64", -+ .controller_data = &pb44_spi0_data, - }, - }; - ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g - } - }; - -+static struct ath79_spi_controller_data ubnt_xm_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info ubnt_xm_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "mx25l6405d", -+ .controller_data = &ubnt_xm_spi0_data, - } - }; - ---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h -+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h -@@ -16,8 +16,14 @@ struct ath79_spi_platform_data { - unsigned num_chipselect; - }; - -+enum ath79_spi_cs_type { -+ ATH79_SPI_CS_TYPE_INTERNAL, -+ ATH79_SPI_CS_TYPE_GPIO, -+}; -+ - struct ath79_spi_controller_data { -- unsigned gpio; -+ enum ath79_spi_cs_type cs_type; -+ unsigned cs_line; - }; - - #endif /* _ATH79_SPI_PLATFORM_H */ ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -35,6 +35,8 @@ - #define ATH79_SPI_RRW_DELAY_FACTOR 12000 - #define MHZ (1000 * 1000) - -+#define ATH79_SPI_CS_LINE_MAX 2 -+ - struct ath79_spi { - struct spi_bitbang bitbang; - u32 ioc_base; -@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct - { - struct ath79_spi *sp = ath79_spidev_to_sp(spi); - int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active; -+ struct ath79_spi_controller_data *cdata = spi->controller_data; - - if (is_active) { - /* set initial clock polarity */ -@@ -80,20 +83,24 @@ static void ath79_spi_chipselect(struct - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); - } - -- if (spi->chip_select) { -- struct ath79_spi_controller_data *cdata = spi->controller_data; -- -- /* SPI is normally active-low */ -- gpio_set_value(cdata->gpio, cs_high); -- } else { -+ switch (cdata->cs_type) { -+ case ATH79_SPI_CS_TYPE_INTERNAL: - if (cs_high) -- sp->ioc_base |= AR71XX_SPI_IOC_CS0; -+ sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line); - else -- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; -+ sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line); - - ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); -- } -+ break; - -+ case ATH79_SPI_CS_TYPE_GPIO: -+ /* SPI is normally active-low */ -+ if (gpio_cansleep(cdata->cs_line)) -+ gpio_set_value_cansleep(cdata->cs_line, cs_high); -+ else -+ gpio_set_value(cdata->cs_line, cs_high); -+ break; -+ } - } - - static void ath79_spi_enable(struct ath79_spi *sp) -@@ -120,24 +127,30 @@ static void ath79_spi_disable(struct ath - static int ath79_spi_setup_cs(struct spi_device *spi) - { - struct ath79_spi_controller_data *cdata; -+ unsigned long flags; - int status; - - cdata = spi->controller_data; -- if (spi->chip_select && !cdata) -+ if (!cdata) - return -EINVAL; - - status = 0; -- if (spi->chip_select) { -- unsigned long flags; -+ switch (cdata->cs_type) { -+ case ATH79_SPI_CS_TYPE_INTERNAL: -+ if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX) -+ status = -EINVAL; -+ break; - -+ case ATH79_SPI_CS_TYPE_GPIO: - flags = GPIOF_DIR_OUT; - if (spi->mode & SPI_CS_HIGH) - flags |= GPIOF_INIT_HIGH; - else - flags |= GPIOF_INIT_LOW; - -- status = gpio_request_one(cdata->gpio, flags, -+ status = gpio_request_one(cdata->cs_line, flags, - dev_name(&spi->dev)); -+ break; - } - - return status; -@@ -145,9 +158,19 @@ static int ath79_spi_setup_cs(struct spi - - static void ath79_spi_cleanup_cs(struct spi_device *spi) - { -- if (spi->chip_select) { -- struct ath79_spi_controller_data *cdata = spi->controller_data; -- gpio_free(cdata->gpio); -+ struct ath79_spi_controller_data *cdata; -+ -+ cdata = spi->controller_data; -+ if (!cdata) -+ return; -+ -+ switch (cdata->cs_type) { -+ case ATH79_SPI_CS_TYPE_INTERNAL: -+ /* nothing to do */ -+ break; -+ case ATH79_SPI_CS_TYPE_GPIO: -+ gpio_free(cdata->cs_line); -+ break; - } - } - -@@ -155,6 +178,9 @@ static int ath79_spi_setup(struct spi_de - { - int status = 0; - -+ if (spi->controller_data == NULL) -+ return -EINVAL; -+ - if (spi->bits_per_word > 32) - return -EINVAL; - -@@ -215,6 +241,10 @@ static int ath79_spi_probe(struct platfo - unsigned long rate; - int ret; - -+ pdata = pdev->dev.platform_data; -+ if (!pdata) -+ return -EINVAL; -+ - master = spi_alloc_master(&pdev->dev, sizeof(*sp)); - if (master == NULL) { - dev_err(&pdev->dev, "failed to allocate spi master\n"); -@@ -224,14 +254,10 @@ static int ath79_spi_probe(struct platfo - sp = spi_master_get_devdata(master); - platform_set_drvdata(pdev, sp); - -- pdata = pdev->dev.platform_data; -- - master->setup = ath79_spi_setup; - master->cleanup = ath79_spi_cleanup; -- if (pdata) { -- master->bus_num = pdata->bus_num; -- master->num_chipselect = pdata->num_chipselect; -- } -+ master->bus_num = pdata->bus_num; -+ master->num_chipselect = pdata->num_chipselect; - - sp->bitbang.master = spi_master_get(master); - sp->bitbang.chipselect = ath79_spi_chipselect; diff --git a/target/linux/ar71xx/patches-3.8/213-MIPS-ath79-fix-ar933x-wmac-reset.patch b/target/linux/ar71xx/patches-3.8/213-MIPS-ath79-fix-ar933x-wmac-reset.patch deleted file mode 100644 index e0821a7..0000000 --- a/target/linux/ar71xx/patches-3.8/213-MIPS-ath79-fix-ar933x-wmac-reset.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -62,10 +62,27 @@ static void __init ar913x_wmac_setup(voi - - static int ar933x_wmac_reset(void) - { -+ int retries = 20; -+ - ath79_device_reset_set(AR933X_RESET_WMAC); - ath79_device_reset_clear(AR933X_RESET_WMAC); - -- return 0; -+ while (1) { -+ u32 bootstrap; -+ -+ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); -+ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0) -+ return 0; -+ -+ if (retries-- == 0) -+ break; -+ -+ udelay(10000); -+ retries++; -+ } -+ -+ pr_err("ar933x: WMAC reset timed out"); -+ return -ETIMEDOUT; - } - - static int ar933x_r1_get_wmac_revision(void) diff --git a/target/linux/ar71xx/patches-3.8/220-add_cpu_feature_overrides.patch b/target/linux/ar71xx/patches-3.8/220-add_cpu_feature_overrides.patch deleted file mode 100644 index 05406f2..0000000 --- a/target/linux/ar71xx/patches-3.8/220-add_cpu_feature_overrides.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h -+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h -@@ -36,6 +36,7 @@ - #define cpu_has_mdmx 0 - #define cpu_has_mips3d 0 - #define cpu_has_smartmips 0 -+#define cpu_has_rixi 0 - - #define cpu_has_mips32r1 1 - #define cpu_has_mips32r2 1 -@@ -45,6 +46,7 @@ - #define cpu_has_dsp 0 - #define cpu_has_dsp2 0 - #define cpu_has_mipsmt 0 -+#define cpu_has_userlocal 0 - - #define cpu_has_64bits 0 - #define cpu_has_64bit_zero_reg 0 -@@ -53,5 +55,9 @@ - - #define cpu_dcache_line_size() 32 - #define cpu_icache_line_size() 32 -+#define cpu_has_vtag_icache 0 -+#define cpu_has_dc_aliases 1 -+#define cpu_has_ic_fills_f_dc 0 -+#define cpu_has_pindexed_dcache 0 - - #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ar71xx/patches-3.8/310-lib-add-rle-decompression.patch b/target/linux/ar71xx/patches-3.8/310-lib-add-rle-decompression.patch deleted file mode 100644 index d81fdd8..0000000 --- a/target/linux/ar71xx/patches-3.8/310-lib-add-rle-decompression.patch +++ /dev/null @@ -1,114 +0,0 @@ ---- a/lib/Kconfig -+++ b/lib/Kconfig -@@ -197,6 +197,9 @@ config LZMA_COMPRESS - config LZMA_DECOMPRESS - tristate - -+config RLE_DECOMPRESS -+ tristate -+ - # - # These all provide a common interface (hence the apparent duplication with - # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) ---- a/lib/Makefile -+++ b/lib/Makefile -@@ -86,6 +86,7 @@ obj-$(CONFIG_XZ_DEC) += xz/ - obj-$(CONFIG_RAID6_PQ) += raid6/ - obj-$(CONFIG_LZMA_COMPRESS) += lzma/ - obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/ -+obj-$(CONFIG_RLE_DECOMPRESS) += rle.o - - lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o - lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o ---- /dev/null -+++ b/include/linux/rle.h -@@ -0,0 +1,8 @@ -+#ifndef _RLE_H_ -+#define _RLE_H_ -+ -+int rle_decode(const unsigned char *src, size_t srclen, -+ unsigned char *dst, size_t dstlen, -+ size_t *src_done, size_t *dst_done); -+ -+#endif /* _RLE_H_ */ ---- /dev/null -+++ b/lib/rle.c -@@ -0,0 +1,78 @@ -+/* -+ * RLE decoding routine -+ * -+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/rle.h> -+ -+int rle_decode(const unsigned char *src, size_t srclen, -+ unsigned char *dst, size_t dstlen, -+ size_t *src_done, size_t *dst_done) -+{ -+ size_t srcpos, dstpos; -+ int ret; -+ -+ srcpos = 0; -+ dstpos = 0; -+ ret = -EINVAL; -+ -+ /* sanity checks */ -+ if (!src || !srclen || !dst || !dstlen) -+ goto out; -+ -+ while (1) { -+ char count; -+ -+ if (srcpos >= srclen) -+ break; -+ -+ count = (char) src[srcpos++]; -+ if (count == 0) { -+ ret = 0; -+ break; -+ } -+ -+ if (count > 0) { -+ unsigned char c; -+ -+ if (srcpos >= srclen) -+ break; -+ -+ c = src[srcpos++]; -+ -+ while (count--) { -+ if (dstpos >= dstlen) -+ break; -+ -+ dst[dstpos++] = c; -+ } -+ } else { -+ count *= -1; -+ -+ while (count--) { -+ if (srcpos >= srclen) -+ break; -+ if (dstpos >= dstlen) -+ break; -+ dst[dstpos++] = src[srcpos++]; -+ } -+ } -+ } -+ -+out: -+ if (src_done) -+ *src_done = srcpos; -+ if (dst_done) -+ *dst_done = dstpos; -+ -+ return ret; -+} -+ -+EXPORT_SYMBOL_GPL(rle_decode); diff --git a/target/linux/ar71xx/patches-3.8/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-3.8/401-mtd-physmap-add-lock-unlock.patch deleted file mode 100644 index ead7685..0000000 --- a/target/linux/ar71xx/patches-3.8/401-mtd-physmap-add-lock-unlock.patch +++ /dev/null @@ -1,94 +0,0 @@ ---- a/drivers/mtd/maps/physmap.c -+++ b/drivers/mtd/maps/physmap.c -@@ -31,6 +31,66 @@ struct physmap_flash_info { - int vpp_refcnt; - }; - -+static struct platform_device *physmap_map2pdev(struct map_info *map) -+{ -+ return (struct platform_device *) map->map_priv_1; -+} -+ -+static void physmap_lock(struct map_info *map) -+{ -+ struct platform_device *pdev; -+ struct physmap_flash_data *physmap_data; -+ -+ pdev = physmap_map2pdev(map); -+ physmap_data = pdev->dev.platform_data; -+ physmap_data->lock(pdev); -+} -+ -+static void physmap_unlock(struct map_info *map) -+{ -+ struct platform_device *pdev; -+ struct physmap_flash_data *physmap_data; -+ -+ pdev = physmap_map2pdev(map); -+ physmap_data = pdev->dev.platform_data; -+ physmap_data->unlock(pdev); -+} -+ -+static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs) -+{ -+ map_word ret; -+ -+ physmap_lock(map); -+ ret = inline_map_read(map, ofs); -+ physmap_unlock(map); -+ -+ return ret; -+} -+ -+static void physmap_flash_write_lock(struct map_info *map, map_word d, -+ unsigned long ofs) -+{ -+ physmap_lock(map); -+ inline_map_write(map, d, ofs); -+ physmap_unlock(map); -+} -+ -+static void physmap_flash_copy_from_lock(struct map_info *map, void *to, -+ unsigned long from, ssize_t len) -+{ -+ physmap_lock(map); -+ inline_map_copy_from(map, to, from, len); -+ physmap_unlock(map); -+} -+ -+static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to, -+ const void *from, ssize_t len) -+{ -+ physmap_lock(map); -+ inline_map_copy_to(map, to, from, len); -+ physmap_unlock(map); -+} -+ - static int physmap_flash_remove(struct platform_device *dev) - { - struct physmap_flash_info *info; -@@ -157,6 +217,13 @@ static int physmap_flash_probe(struct pl - - simple_map_init(&info->map[i]); - -+ if (physmap_data->lock && physmap_data->unlock) { -+ info->map[i].read = physmap_flash_read_lock; -+ info->map[i].write = physmap_flash_write_lock; -+ info->map[i].copy_from = physmap_flash_copy_from_lock; -+ info->map[i].copy_to = physmap_flash_copy_to_lock; -+ } -+ - probe_type = rom_probe_types; - if (physmap_data->probe_type == NULL) { - for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++) ---- a/include/linux/mtd/physmap.h -+++ b/include/linux/mtd/physmap.h -@@ -26,6 +26,8 @@ struct physmap_flash_data { - unsigned int width; - int (*init)(struct platform_device *); - void (*exit)(struct platform_device *); -+ void (*lock)(struct platform_device *); -+ void (*unlock)(struct platform_device *); - void (*set_vpp)(struct platform_device *, int); - unsigned int nr_parts; - unsigned int pfow_base; diff --git a/target/linux/ar71xx/patches-3.8/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-3.8/402-mtd-SST39VF6401B-support.patch deleted file mode 100644 index 246abd5..0000000 --- a/target/linux/ar71xx/patches-3.8/402-mtd-SST39VF6401B-support.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/mtd/chips/jedec_probe.c -+++ b/drivers/mtd/chips/jedec_probe.c -@@ -148,6 +148,7 @@ - #define SST39LF160 0x2782 - #define SST39VF1601 0x234b - #define SST39VF3201 0x235b -+#define SST39VF6401B 0x236d - #define SST39WF1601 0x274b - #define SST39WF1602 0x274a - #define SST39LF512 0x00D4 -@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec - ERASEINFO(0x10000,64), - } - }, { -+ .mfr_id = CFI_MFR_SST, -+ .dev_id = SST39VF6401B, -+ .name = "SST 39VF6401B", -+ .devtypes = CFI_DEVICETYPE_X16, -+ .uaddr = MTD_UADDR_0xAAAA_0x5555, -+ .dev_size = SIZE_8MiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x10000,128) -+ } -+ }, { - .mfr_id = CFI_MFR_ST, - .dev_id = M29F800AB, - .name = "ST M29F800AB", diff --git a/target/linux/ar71xx/patches-3.8/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-3.8/403-mtd_fix_cfi_cmdset_0002_status_check.patch deleted file mode 100644 index e569fe1..0000000 --- a/target/linux/ar71xx/patches-3.8/403-mtd_fix_cfi_cmdset_0002_status_check.patch +++ /dev/null @@ -1,69 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1288,8 +1288,8 @@ static int __xipram do_write_oneword(str - break; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, datum)) -+ goto enable_xip; - - /* Latency issues. Drop the lock, wait a while and retry */ - UDELAY(map, chip, adr, 1); -@@ -1305,6 +1305,8 @@ static int __xipram do_write_oneword(str - - ret = -EIO; - } -+ -+ enable_xip: - xip_enable(map, chip, adr); - op_done: - chip->state = FL_READY; -@@ -1875,7 +1877,6 @@ static int cfi_amdstd_panic_write(struct - return 0; - } - -- - /* - * Handle devices with one erase region, that only implement - * the chip erase command. -@@ -1939,8 +1940,8 @@ static int __xipram do_erase_chip(struct - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, map_word_ff(map))) -+ goto op_done; - - if (time_after(jiffies, timeo)) { - printk(KERN_WARNING "MTD %s(): software timeout\n", -@@ -1960,6 +1961,7 @@ static int __xipram do_erase_chip(struct - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - xip_enable(map, chip, adr); - DISABLE_VPP(map); -@@ -2028,9 +2030,9 @@ static int __xipram do_erase_oneblock(st - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) { -+ if (chip_good(map, adr, map_word_ff(map))) { - xip_enable(map, chip, adr); -- break; -+ goto op_done; - } - - if (time_after(jiffies, timeo)) { -@@ -2052,6 +2054,7 @@ static int __xipram do_erase_oneblock(st - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - DISABLE_VPP(map); - put_chip(map, chip, adr); diff --git a/target/linux/ar71xx/patches-3.8/404-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-3.8/404-mtd-wrt160nl-trx-parser.patch deleted file mode 100644 index 71798c4..0000000 --- a/target/linux/ar71xx/patches-3.8/404-mtd-wrt160nl-trx-parser.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -163,6 +163,12 @@ config MTD_BCM47XX_PARTS - This provides partitions parser for devices based on BCM47xx - boards. - -+config MTD_WRT160NL_PARTS -+ tristate "Linksys WRT160NL partitioning support" -+ depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL -+ ---help--- -+ Linksys WRT160NL partitioning support -+ - config MTD_MYLOADER_PARTS - tristate "MyLoader partition parsing" - depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79 ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o - obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o -+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/ar71xx/patches-3.8/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-3.8/405-mtd-tp-link-partition-parser.patch deleted file mode 100644 index 45676ec..0000000 --- a/target/linux/ar71xx/patches-3.8/405-mtd-tp-link-partition-parser.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -165,7 +165,7 @@ config MTD_BCM47XX_PARTS - - config MTD_WRT160NL_PARTS - tristate "Linksys WRT160NL partitioning support" -- depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL -+ depends on ATH79_MACH_WRT160NL - ---help--- - Linksys WRT160NL partitioning support - -@@ -185,6 +185,12 @@ config MTD_MYLOADER_PARTS - You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. - -+config MTD_TPLINK_PARTS -+ tristate "TP-Link AR7XXX/AR9XXX partitioning support" -+ depends on ATH79 -+ ---help--- -+ TBD. -+ - comment "User Modules And Translation Layers" - - config MTD_CHAR ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o - obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o -+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o - obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o - - # 'Users' - code which presents functionality to userspace. diff --git a/target/linux/ar71xx/patches-3.8/406-mtd-m25p80-allow-to-specify-max-read-size.patch b/target/linux/ar71xx/patches-3.8/406-mtd-m25p80-allow-to-specify-max-read-size.patch deleted file mode 100644 index d610614..0000000 --- a/target/linux/ar71xx/patches-3.8/406-mtd-m25p80-allow-to-specify-max-read-size.patch +++ /dev/null @@ -1,109 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -93,6 +93,7 @@ struct m25p { - u8 erase_opcode; - u8 *command; - bool fast_read; -+ size_t max_read_len; - }; - - static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd) -@@ -344,6 +345,7 @@ static int m25p80_read(struct mtd_info * - struct spi_transfer t[2]; - struct spi_message m; - uint8_t opcode; -+ loff_t ofs; - - pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev), - __func__, (u32)from, len); -@@ -359,19 +361,10 @@ static int m25p80_read(struct mtd_info * - t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0); - spi_message_add_tail(&t[0], &m); - -- t[1].rx_buf = buf; -- t[1].len = len; - spi_message_add_tail(&t[1], &m); - - mutex_lock(&flash->lock); - -- /* Wait till previous write/erase is done. */ -- if (wait_till_ready(flash)) { -- /* REVISIT status return?? */ -- mutex_unlock(&flash->lock); -- return 1; -- } -- - /* FIXME switch to OPCODE_FAST_READ. It's required for higher - * clocks; and at this writing, every chip this driver handles - * supports that opcode. -@@ -380,13 +373,43 @@ static int m25p80_read(struct mtd_info * - /* Set up the write data buffer. */ - opcode = flash->fast_read ? OPCODE_FAST_READ : OPCODE_NORM_READ; - flash->command[0] = opcode; -- m25p_addr2cmd(flash, from, flash->command); -+ ofs = 0; -+ while (len) { -+ size_t readlen; -+ size_t done; -+ int ret; -+ -+ ret = wait_till_ready(flash); -+ if (ret) { -+ mutex_unlock(&flash->lock); -+ return 1; -+ } -+ -+ if (flash->max_read_len > 0 && -+ flash->max_read_len < len) -+ readlen = flash->max_read_len; -+ else -+ readlen = len; -+ -+ t[1].rx_buf = buf + ofs; -+ t[1].len = readlen; -+ -+ m25p_addr2cmd(flash, from + ofs, flash->command); -+ -+ spi_sync(flash->spi, &m); - -- spi_sync(flash->spi, &m); -+ done = m.actual_length - m25p_cmdsz(flash) - -+ (flash->fast_read ? 1 : 0); -+ if (done != readlen) { -+ mutex_unlock(&flash->lock); -+ return 1; -+ } - -- *retlen = m.actual_length - m25p_cmdsz(flash) - -- (flash->fast_read ? 1 : 0); -+ ofs += done; -+ len -= done; -+ } - -+ *retlen = ofs; - mutex_unlock(&flash->lock); - - return 0; -@@ -917,6 +940,12 @@ static int m25p_probe(struct spi_device - flash->mtd._erase = m25p80_erase; - flash->mtd._read = m25p80_read; - -+ if (data && data->max_read_len) { -+ flash->max_read_len = data->max_read_len; -+ dev_warn(&spi->dev, "max_read_len set to %d bytes\n", -+ flash->max_read_len); -+ } -+ - /* sst flash chips use AAI word program */ - if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) - flash->mtd._write = sst_write; ---- a/include/linux/spi/flash.h -+++ b/include/linux/spi/flash.h -@@ -25,6 +25,7 @@ struct flash_platform_data { - - char *type; - -+ size_t max_read_len; - /* we'll likely add more ... use JEDEC IDs, etc */ - }; - diff --git a/target/linux/ar71xx/patches-3.8/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-3.8/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch deleted file mode 100644 index d516775..0000000 --- a/target/linux/ar71xx/patches-3.8/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -1017,7 +1017,9 @@ static int m25p_probe(struct spi_device - /* partitions should match sector boundaries; and it may be good to - * use readonly partitions for writeprotected sectors (BP2..BP0). - */ -- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, -+ return mtd_device_parse_register(&flash->mtd, -+ data ? data->part_probes : NULL, -+ &ppdata, - data ? data->parts : NULL, - data ? data->nr_parts : 0); - } ---- a/include/linux/spi/flash.h -+++ b/include/linux/spi/flash.h -@@ -24,6 +24,7 @@ struct flash_platform_data { - unsigned int nr_parts; - - char *type; -+ const char **part_probes; - - size_t max_read_len; - /* we'll likely add more ... use JEDEC IDs, etc */ diff --git a/target/linux/ar71xx/patches-3.8/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-3.8/408-mtd-redboot_partition_scan.patch deleted file mode 100644 index cd41e7c..0000000 --- a/target/linux/ar71xx/patches-3.8/408-mtd-redboot_partition_scan.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru - static char nullstring[] = "unallocated"; - #endif - -+ buf = vmalloc(master->erasesize); -+ if (!buf) -+ return -ENOMEM; -+ -+ restart: - if ( directory < 0 ) { - offset = master->size + directory * master->erasesize; - while (mtd_block_isbad(master, offset)) { - if (!offset) { - nogood: - printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); -+ vfree(buf); - return -EIO; - } - offset -= master->erasesize; -@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru - goto nogood; - } - } -- buf = vmalloc(master->erasesize); -- -- if (!buf) -- return -ENOMEM; - - printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", - master->name, offset); -@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru - } - if (i == numslots) { - /* Didn't find it */ -+ if (offset + master->erasesize < master->size) { -+ /* not at the end of the flash yet, maybe next block :) */ -+ directory++; -+ goto restart; -+ } - printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", - master->name); - ret = 0; diff --git a/target/linux/ar71xx/patches-3.8/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-3.8/409-mtd-rb4xx_nand_driver.patch deleted file mode 100644 index 082df87..0000000 --- a/target/linux/ar71xx/patches-3.8/409-mtd-rb4xx_nand_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -575,4 +575,8 @@ config MTD_NAND_XWAY - Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached - to the External Bus Unit (EBU). - -+config MTD_NAND_RB4XX -+ tristate "NAND flash driver for RouterBoard 4xx series" -+ depends on MTD_NAND && ATH79_MACH_RB4XX -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27 - obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o -+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-3.8/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-3.8/410-mtd-rb750-nand-driver.patch deleted file mode 100644 index 1247866..0000000 --- a/target/linux/ar71xx/patches-3.8/410-mtd-rb750-nand-driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -579,4 +579,8 @@ config MTD_NAND_RB4XX - tristate "NAND flash driver for RouterBoard 4xx series" - depends on MTD_NAND && ATH79_MACH_RB4XX - -+config MTD_NAND_RB750 -+ tristate "NAND flash driver for the RouterBoard 750" -+ depends on MTD_NAND && ATH79_MACH_RB750 -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -35,6 +35,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o - obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o -+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-3.8/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-3.8/411-mtd-cfi_cmdset_0002-force-word-write.patch deleted file mode 100644 index 2d8e6e6..0000000 --- a/target/linux/ar71xx/patches-3.8/411-mtd-cfi_cmdset_0002-force-word-write.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -39,7 +39,7 @@ - #include <linux/mtd/xip.h> - - #define AMD_BOOTLOC_BUG --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - #define MAX_WORD_RETRIES 3 - -@@ -50,7 +50,9 @@ - - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#if !FORCE_WORD_WRITE - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#endif - static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); - static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); - static void cfi_amdstd_sync (struct mtd_info *); -@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m - } - #endif - -+#if !FORCE_WORD_WRITE - static void fixup_use_write_buffers(struct mtd_info *mtd) - { - struct map_info *map = mtd->priv; -@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru - mtd->_write = cfi_amdstd_write_buffers; - } - } -+#endif /* !FORCE_WORD_WRITE */ - - /* Atmel chips don't use the same PRI format as AMD chips */ - static void fixup_convert_atmel_pri(struct mtd_info *mtd) -@@ -1445,6 +1449,7 @@ static int cfi_amdstd_write_words(struct - /* - * FIXME: interleaved mode not tested, and probably not supported! - */ -+#if !FORCE_WORD_WRITE - static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, - unsigned long adr, const u_char *buf, - int len) -@@ -1569,7 +1574,6 @@ static int __xipram do_write_buffer(stru - return ret; - } - -- - static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) - { -@@ -1644,6 +1648,7 @@ static int cfi_amdstd_write_buffers(stru - - return 0; - } -+#endif /* !FORCE_WORD_WRITE */ - - /* - * Wait for the flash chip to become ready to write data diff --git a/target/linux/ar71xx/patches-3.8/412-mtd-m25p80-zero-partition-parser-data.patch b/target/linux/ar71xx/patches-3.8/412-mtd-m25p80-zero-partition-parser-data.patch deleted file mode 100644 index 8d47cbb..0000000 --- a/target/linux/ar71xx/patches-3.8/412-mtd-m25p80-zero-partition-parser-data.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -967,6 +967,7 @@ static int m25p_probe(struct spi_device - if (info->flags & M25P_NO_ERASE) - flash->mtd.flags |= MTD_NO_ERASE; - -+ memset(&ppdata, '\0', sizeof(ppdata)); - ppdata.of_node = spi->dev.of_node; - flash->mtd.dev.parent = &spi->dev; - flash->page_size = info->page_size; diff --git a/target/linux/ar71xx/patches-3.8/413-mtd-ar934x-nand-driver.patch b/target/linux/ar71xx/patches-3.8/413-mtd-ar934x-nand-driver.patch deleted file mode 100644 index f8362cb..0000000 --- a/target/linux/ar71xx/patches-3.8/413-mtd-ar934x-nand-driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -583,4 +583,8 @@ config MTD_NAND_RB750 - tristate "NAND flash driver for the RouterBoard 750" - depends on MTD_NAND && ATH79_MACH_RB750 - -+config MTD_NAND_AR934X -+ tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs" -+ depends on (SOC_AR934X || SOC_QCA955X) -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams- - obj-$(CONFIG_MTD_NAND_DENALI) += denali.o - obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o - obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o -+obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nfc.o - obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o - obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o - obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o diff --git a/target/linux/ar71xx/patches-3.8/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-3.8/420-net-ar71xx_mac_driver.patch deleted file mode 100644 index f117133..0000000 --- a/target/linux/ar71xx/patches-3.8/420-net-ar71xx_mac_driver.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/net/ethernet/atheros/Kconfig -+++ b/drivers/net/ethernet/atheros/Kconfig -@@ -5,7 +5,7 @@ - config NET_VENDOR_ATHEROS - bool "Atheros devices" - default y -- depends on PCI -+ depends on (PCI || ATH79) - ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from -@@ -67,4 +67,6 @@ config ATL1C - To compile this driver as a module, choose M here. The module - will be called atl1c. - -+source drivers/net/ethernet/atheros/ag71xx/Kconfig -+ - endif # NET_VENDOR_ATHEROS ---- a/drivers/net/ethernet/atheros/Makefile -+++ b/drivers/net/ethernet/atheros/Makefile -@@ -2,6 +2,7 @@ - # Makefile for the Atheros network device drivers. - # - -+obj-$(CONFIG_AG71XX) += ag71xx/ - obj-$(CONFIG_ATL1) += atlx/ - obj-$(CONFIG_ATL2) += atlx/ - obj-$(CONFIG_ATL1E) += atl1e/ diff --git a/target/linux/ar71xx/patches-3.8/422-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-3.8/422-dsa-trailer-tag-validation-fix.patch deleted file mode 100644 index 3e3902b..0000000 --- a/target/linux/ar71xx/patches-3.8/422-dsa-trailer-tag-validation-fix.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/net/dsa/tag_trailer.c -+++ b/net/dsa/tag_trailer.c -@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s - - trailer = skb_tail_pointer(skb) - 4; - if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 || -- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00) -+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00) - goto out_drop; - - source_port = trailer[1] & 7; diff --git a/target/linux/ar71xx/patches-3.8/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-3.8/423-dsa-add-88e6063-driver.patch deleted file mode 100644 index 1348cd9..0000000 --- a/target/linux/ar71xx/patches-3.8/423-dsa-add-88e6063-driver.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/net/dsa/Kconfig -+++ b/drivers/net/dsa/Kconfig -@@ -13,6 +13,13 @@ config NET_DSA_MV88E6060 - This enables support for the Marvell 88E6060 ethernet switch - chip. - -+config NET_DSA_MV88E6063 -+ bool "Marvell 88E6063 ethernet switch chip support" -+ select NET_DSA_TAG_TRAILER -+ ---help--- -+ This enables support for the Marvell 88E6063 ethernet switch -+ chip -+ - config NET_DSA_MV88E6XXX_NEED_PPU - bool - default n ---- a/drivers/net/dsa/Makefile -+++ b/drivers/net/dsa/Makefile -@@ -1,4 +1,5 @@ - obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o -+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o - obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o - mv88e6xxx_drv-y += mv88e6xxx.o - ifdef CONFIG_NET_DSA_MV88E6123_61_65 diff --git a/target/linux/ar71xx/patches-3.8/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-3.8/430-drivers-link-spi-before-mtd.patch deleted file mode 100644 index 88d1457..0000000 --- a/target/linux/ar71xx/patches-3.8/430-drivers-link-spi-before-mtd.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -60,8 +60,8 @@ obj-$(CONFIG_IDE) += ide/ - obj-$(CONFIG_SCSI) += scsi/ - obj-$(CONFIG_ATA) += ata/ - obj-$(CONFIG_TARGET_CORE) += target/ --obj-$(CONFIG_MTD) += mtd/ - obj-$(CONFIG_SPI) += spi/ -+obj-$(CONFIG_MTD) += mtd/ - obj-y += hsi/ - obj-y += net/ - obj-$(CONFIG_ATM) += atm/ diff --git a/target/linux/ar71xx/patches-3.8/431-spi-add-various-flags.patch b/target/linux/ar71xx/patches-3.8/431-spi-add-various-flags.patch deleted file mode 100644 index 9f13db2..0000000 --- a/target/linux/ar71xx/patches-3.8/431-spi-add-various-flags.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -506,6 +506,8 @@ struct spi_transfer { - dma_addr_t rx_dma; - - unsigned cs_change:1; -+ unsigned verify:1; -+ unsigned fast_write:1; - u8 bits_per_word; - u16 delay_usecs; - u32 speed_hz; -@@ -547,6 +549,7 @@ struct spi_message { - struct spi_device *spi; - - unsigned is_dma_mapped:1; -+ unsigned fast_read:1; - - /* REVISIT: we might want a flag affecting the behavior of the - * last transfer ... allowing things like "read 16 bit length L" diff --git a/target/linux/ar71xx/patches-3.8/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-3.8/432-spi-rb4xx-spi-driver.patch deleted file mode 100644 index 1ff133c..0000000 --- a/target/linux/ar71xx/patches-3.8/432-spi-rb4xx-spi-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -324,6 +324,12 @@ config SPI_RSPI - help - SPI driver for Renesas RSPI blocks. - -+config SPI_RB4XX -+ tristate "Mikrotik RB4XX SPI master" -+ depends on SPI_MASTER && ATH79_MACH_RB4XX -+ help -+ SPI controller driver for the Mikrotik RB4xx series boards. -+ - config SPI_S3C24XX - tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C24XX && EXPERIMENTAL ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -50,6 +50,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o - obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o - obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o - obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o -+obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o - obj-$(CONFIG_SPI_RSPI) += spi-rspi.o - obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o - spi-s3c24xx-hw-y := spi-s3c24xx.o diff --git a/target/linux/ar71xx/patches-3.8/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-3.8/433-spi-rb4xx-cpld-driver.patch deleted file mode 100644 index 8fb9fa5..0000000 --- a/target/linux/ar71xx/patches-3.8/433-spi-rb4xx-cpld-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -509,6 +509,13 @@ config SPI_TLE62X0 - sysfs interface, with each line presented as a kind of GPIO - exposing both switch control and diagnostic feedback. - -+config SPI_RB4XX_CPLD -+ tristate "MikroTik RB4XX CPLD driver" -+ depends on ATH79_MACH_RB4XX -+ help -+ SPI driver for the Xilinx CPLD chip present on the -+ MikroTik RB4xx boards. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -51,6 +51,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx. - obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o - obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o - obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o -+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o - obj-$(CONFIG_SPI_RSPI) += spi-rspi.o - obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o - spi-s3c24xx-hw-y := spi-s3c24xx.o diff --git a/target/linux/ar71xx/patches-3.8/434-spi-ap83_spi_controller.patch b/target/linux/ar71xx/patches-3.8/434-spi-ap83_spi_controller.patch deleted file mode 100644 index 964ffe3..0000000 --- a/target/linux/ar71xx/patches-3.8/434-spi-ap83_spi_controller.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV) += spidev.o - # SPI master controller drivers (bus) - obj-$(CONFIG_SPI_ALTERA) += spi-altera.o - obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o -+obj-$(CONFIG_SPI_AP83) += spi-ap83.o - obj-$(CONFIG_SPI_ATH79) += spi-ath79.o - obj-$(CONFIG_SPI_AU1550) += spi-au1550.o - obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -59,6 +59,14 @@ config SPI_ALTERA - help - This is the driver for the Altera SPI Controller. - -+config SPI_AP83 -+ tristate "Atheros AP83 specific SPI Controller" -+ depends on SPI_MASTER && ATH79_MACH_AP83 -+ select SPI_BITBANG -+ help -+ This is a specific SPI controller driver for the Atheros AP83 -+ reference board. -+ - config SPI_ATH79 - tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" - depends on ATH79 && GENERIC_GPIO diff --git a/target/linux/ar71xx/patches-3.8/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-3.8/435-spi-vsc7385_driver.patch deleted file mode 100644 index c06ae53..0000000 --- a/target/linux/ar71xx/patches-3.8/435-spi-vsc7385_driver.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -524,6 +524,11 @@ config SPI_RB4XX_CPLD - SPI driver for the Xilinx CPLD chip present on the - MikroTik RB4xx boards. - -+config SPI_VSC7385 -+ tristate "Vitesse VSC7385 ethernet switch driver" -+ help -+ SPI driver for the Vitesse VSC7385 ethernet switch. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -70,5 +70,6 @@ obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp. - obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o - obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o - obj-$(CONFIG_SPI_TXX9) += spi-txx9.o -+obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o - obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o - obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o diff --git a/target/linux/ar71xx/patches-3.8/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-3.8/440-leds-wndr3700-usb-led-driver.patch deleted file mode 100644 index e82277a..0000000 --- a/target/linux/ar71xx/patches-3.8/440-leds-wndr3700-usb-led-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -467,6 +467,13 @@ config LEDS_TRIGGERS - These triggers allow kernel events to drive the LEDs and can - be configured via sysfs. If unsure, say Y. - -+config LEDS_WNDR3700_USB -+ tristate "NETGEAR WNDR3700 USB LED driver" -+ depends on LEDS_CLASS && ATH79_MACH_WNDR3700 -+ help -+ This option enables support for the USB LED found on the -+ NETGEAR WNDR3700 board. -+ - comment "LED Triggers" - - config LEDS_TRIGGER_TIMER ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -38,6 +38,7 @@ obj-$(CONFIG_LEDS_DA9052) += leds-da905 - obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o - obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o - obj-$(CONFIG_LEDS_PWM) += leds-pwm.o -+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o - obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o - obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o - obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o diff --git a/target/linux/ar71xx/patches-3.8/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-3.8/441-leds-rb750-led-driver.patch deleted file mode 100644 index 4eaa604..0000000 --- a/target/linux/ar71xx/patches-3.8/441-leds-rb750-led-driver.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -474,6 +474,10 @@ config LEDS_WNDR3700_USB - This option enables support for the USB LED found on the - NETGEAR WNDR3700 board. - -+config LEDS_RB750 -+ tristate "LED driver for the Mikrotik RouterBOARD 750" -+ depends on LEDS_CLASS && ATH79_MACH_RB750 -+ - comment "LED Triggers" - - config LEDS_TRIGGER_TIMER ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -45,6 +45,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359 - obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o - obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o - obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o -+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o - obj-$(CONFIG_LEDS_NS2) += leds-ns2.o - obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o - obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o diff --git a/target/linux/ar71xx/patches-3.8/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-3.8/450-gpio-nxp-74hc153-gpio-chip-driver.patch deleted file mode 100644 index 97e15cd..0000000 --- a/target/linux/ar71xx/patches-3.8/450-gpio-nxp-74hc153-gpio-chip-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -697,4 +697,12 @@ config GPIO_VIPERBOARD - River Tech's viperboard.h for detailed meaning - of the module parameters. - -+comment "Other GPIO expanders" -+ -+config GPIO_NXP_74HC153 -+ tristate "NXP 74HC153 Dual 4-input multiplexer" -+ help -+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This -+ provides a GPIO interface supporting input mode only. -+ - endif ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -48,6 +48,7 @@ obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2 - obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o - obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o - obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o -+obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o - obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o - obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o - obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o diff --git a/target/linux/ar71xx/patches-3.8/460-spi-bitbang-export-spi_bitbang_bufs.patch b/target/linux/ar71xx/patches-3.8/460-spi-bitbang-export-spi_bitbang_bufs.patch deleted file mode 100644 index 919b85c..0000000 --- a/target/linux/ar71xx/patches-3.8/460-spi-bitbang-export-spi_bitbang_bufs.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/spi/spi-bitbang.c -+++ b/drivers/spi/spi-bitbang.c -@@ -234,13 +234,14 @@ void spi_bitbang_cleanup(struct spi_devi - } - EXPORT_SYMBOL_GPL(spi_bitbang_cleanup); - --static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) -+int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) - { - struct spi_bitbang_cs *cs = spi->controller_state; - unsigned nsecs = cs->nsecs; - - return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t); - } -+EXPORT_SYMBOL_GPL(spi_bitbang_bufs); - - /*----------------------------------------------------------------------*/ - ---- a/include/linux/spi/spi_bitbang.h -+++ b/include/linux/spi/spi_bitbang.h -@@ -44,6 +44,7 @@ extern void spi_bitbang_cleanup(struct s - extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m); - extern int spi_bitbang_setup_transfer(struct spi_device *spi, - struct spi_transfer *t); -+extern int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t); - - /* start or stop queue processing */ - extern int spi_bitbang_start(struct spi_bitbang *spi); diff --git a/target/linux/ar71xx/patches-3.8/461-spi-add-type-field-to-spi_transfer.patch b/target/linux/ar71xx/patches-3.8/461-spi-add-type-field-to-spi_transfer.patch deleted file mode 100644 index d956499..0000000 --- a/target/linux/ar71xx/patches-3.8/461-spi-add-type-field-to-spi_transfer.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -409,6 +409,12 @@ extern struct spi_master *spi_busnum_to_ - - /*---------------------------------------------------------------------------*/ - -+enum spi_transfer_type { -+ SPI_TRANSFER_GENERIC = 0, -+ SPI_TRANSFER_FLASH_READ_CMD, -+ SPI_TRANSFER_FLASH_READ_DATA, -+}; -+ - /* - * I/O INTERFACE between SPI controller and protocol drivers - * -@@ -511,6 +517,7 @@ struct spi_transfer { - u8 bits_per_word; - u16 delay_usecs; - u32 speed_hz; -+ enum spi_transfer_type type; - - struct list_head transfer_list; - }; diff --git a/target/linux/ar71xx/patches-3.8/462-mtd-m25p80-set-spi-transfer-type.patch b/target/linux/ar71xx/patches-3.8/462-mtd-m25p80-set-spi-transfer-type.patch deleted file mode 100644 index e1ceb66..0000000 --- a/target/linux/ar71xx/patches-3.8/462-mtd-m25p80-set-spi-transfer-type.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -357,10 +357,12 @@ static int m25p80_read(struct mtd_info * - * OPCODE_FAST_READ (if available) is faster. - * Should add 1 byte DUMMY_BYTE. - */ -+ t[0].type = SPI_TRANSFER_FLASH_READ_CMD; - t[0].tx_buf = flash->command; - t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0); - spi_message_add_tail(&t[0], &m); - -+ t[1].type = SPI_TRANSFER_FLASH_READ_DATA; - spi_message_add_tail(&t[1], &m); - - mutex_lock(&flash->lock); diff --git a/target/linux/ar71xx/patches-3.8/463-spi-ath79-add-fast-flash-read.patch b/target/linux/ar71xx/patches-3.8/463-spi-ath79-add-fast-flash-read.patch deleted file mode 100644 index e861644..0000000 --- a/target/linux/ar71xx/patches-3.8/463-spi-ath79-add-fast-flash-read.patch +++ /dev/null @@ -1,185 +0,0 @@ ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -37,6 +37,11 @@ - - #define ATH79_SPI_CS_LINE_MAX 2 - -+enum ath79_spi_state { -+ ATH79_SPI_STATE_WAIT_CMD = 0, -+ ATH79_SPI_STATE_WAIT_READ, -+}; -+ - struct ath79_spi { - struct spi_bitbang bitbang; - u32 ioc_base; -@@ -44,6 +49,11 @@ struct ath79_spi { - void __iomem *base; - struct clk *clk; - unsigned rrw_delay; -+ -+ enum ath79_spi_state state; -+ u32 clk_div; -+ unsigned long read_addr; -+ unsigned long ahb_rate; - }; - - static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg) -@@ -111,9 +121,6 @@ static void ath79_spi_enable(struct ath7 - /* save CTRL register */ - sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL); - sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC); -- -- /* TODO: setup speed? */ -- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); - } - - static void ath79_spi_disable(struct ath79_spi *sp) -@@ -232,6 +239,110 @@ static u32 ath79_spi_txrx_mode0(struct s - return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS); - } - -+static int ath79_spi_do_read_flash_data(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ struct ath79_spi *sp = ath79_spidev_to_sp(spi); -+ -+ /* disable GPIO mode */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); -+ -+ memcpy_fromio(t->rx_buf, sp->base + sp->read_addr, t->len); -+ -+ /* enable GPIO mode */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); -+ -+ /* restore IOC register */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); -+ -+ return t->len; -+} -+ -+static int ath79_spi_do_read_flash_cmd(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ struct ath79_spi *sp = ath79_spidev_to_sp(spi); -+ int len; -+ const u8 *p; -+ -+ sp->read_addr = 0; -+ -+ len = t->len - 1; -+ p = t->tx_buf; -+ -+ while (len--) { -+ p++; -+ sp->read_addr <<= 8; -+ sp->read_addr |= *p; -+ } -+ -+ return t->len; -+} -+ -+static bool ath79_spi_is_read_cmd(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ return t->type == SPI_TRANSFER_FLASH_READ_CMD; -+} -+ -+static bool ath79_spi_is_data_read(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ return t->type == SPI_TRANSFER_FLASH_READ_DATA; -+} -+ -+static int ath79_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) -+{ -+ struct ath79_spi *sp = ath79_spidev_to_sp(spi); -+ int ret; -+ -+ switch (sp->state) { -+ case ATH79_SPI_STATE_WAIT_CMD: -+ if (ath79_spi_is_read_cmd(spi, t)) { -+ ret = ath79_spi_do_read_flash_cmd(spi, t); -+ sp->state = ATH79_SPI_STATE_WAIT_READ; -+ } else { -+ ret = spi_bitbang_bufs(spi, t); -+ } -+ break; -+ -+ case ATH79_SPI_STATE_WAIT_READ: -+ if (ath79_spi_is_data_read(spi, t)) { -+ ret = ath79_spi_do_read_flash_data(spi, t); -+ } else { -+ dev_warn(&spi->dev, "flash data read expected\n"); -+ ret = -EIO; -+ } -+ sp->state = ATH79_SPI_STATE_WAIT_CMD; -+ break; -+ -+ default: -+ BUG(); -+ } -+ -+ return ret; -+} -+ -+static int ath79_spi_setup_transfer(struct spi_device *spi, -+ struct spi_transfer *t) -+{ -+ struct ath79_spi *sp = ath79_spidev_to_sp(spi); -+ struct ath79_spi_controller_data *cdata; -+ int ret; -+ -+ ret = spi_bitbang_setup_transfer(spi, t); -+ if (ret) -+ return ret; -+ -+ cdata = spi->controller_data; -+ if (cdata->is_flash) -+ sp->bitbang.txrx_bufs = ath79_spi_txrx_bufs; -+ else -+ sp->bitbang.txrx_bufs = spi_bitbang_bufs; -+ -+ return ret; -+} -+ - static int ath79_spi_probe(struct platform_device *pdev) - { - struct spi_master *master; -@@ -254,6 +365,8 @@ static int ath79_spi_probe(struct platfo - sp = spi_master_get_devdata(master); - platform_set_drvdata(pdev, sp); - -+ sp->state = ATH79_SPI_STATE_WAIT_CMD; -+ - master->setup = ath79_spi_setup; - master->cleanup = ath79_spi_cleanup; - master->bus_num = pdata->bus_num; -@@ -262,7 +375,7 @@ static int ath79_spi_probe(struct platfo - sp->bitbang.master = spi_master_get(master); - sp->bitbang.chipselect = ath79_spi_chipselect; - sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0; -- sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; -+ sp->bitbang.setup_transfer = ath79_spi_setup_transfer; - sp->bitbang.flags = SPI_CS_HIGH; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -@@ -287,7 +400,8 @@ static int ath79_spi_probe(struct platfo - if (ret) - goto err_clk_put; - -- rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ); -+ sp->ahb_rate = clk_get_rate(sp->clk); -+ rate = DIV_ROUND_UP(sp->ahb_rate, MHZ); - if (!rate) { - ret = -EINVAL; - goto err_clk_disable; ---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h -+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h -@@ -24,6 +24,7 @@ enum ath79_spi_cs_type { - struct ath79_spi_controller_data { - enum ath79_spi_cs_type cs_type; - unsigned cs_line; -+ bool is_flash; - }; - - #endif /* _ATH79_SPI_PLATFORM_H */ diff --git a/target/linux/ar71xx/patches-3.8/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ar71xx/patches-3.8/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch deleted file mode 100644 index 520c652..0000000 --- a/target/linux/ar71xx/patches-3.8/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch +++ /dev/null @@ -1,111 +0,0 @@ ---- /dev/null -+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h -@@ -0,0 +1,37 @@ -+/* -+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h -+ * Copyright (C) 2003, 2004 Ralf Baechle -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H -+#define __ASM_MACH_ATH79_MANGLE_PORT_H -+ -+#ifdef CONFIG_PCI -+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port); -+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port); -+#else -+#define ath79_pci_swizzle_b(port) (port) -+#define ath79_pci_swizzle_w(port) (port) -+#endif -+ -+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port) -+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port) -+#define __swizzle_addr_l(port) (port) -+#define __swizzle_addr_q(port) (port) -+ -+# define ioswabb(a, x) (x) -+# define __mem_ioswabb(a, x) (x) -+# define ioswabw(a, x) (x) -+# define __mem_ioswabw(a, x) cpu_to_le16(x) -+# define ioswabl(a, x) (x) -+# define __mem_ioswabl(a, x) cpu_to_le32(x) -+# define ioswabq(a, x) (x) -+# define __mem_ioswabq(a, x) cpu_to_le64(x) -+ -+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */ ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -13,6 +13,7 @@ - */ - - #include <linux/init.h> -+#include <linux/export.h> - #include <linux/pci.h> - #include <linux/resource.h> - #include <linux/platform_device.h> -@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st - static const struct ath79_pci_irq *ath79_pci_irq_map __initdata; - static unsigned ath79_pci_nr_irqs __initdata; - -+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port); -+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port); -+ - static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = { - { - .slot = 17, -@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id, - return pdev; - } - -+static inline bool ar71xx_is_pci_addr(unsigned long port) -+{ -+ unsigned long phys = CPHYSADDR(port); -+ -+ return (phys >= AR71XX_PCI_MEM_BASE && -+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE); -+} -+ -+static unsigned long ar71xx_pci_swizzle_b(unsigned long port) -+{ -+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port; -+} -+ -+static unsigned long ar71xx_pci_swizzle_w(unsigned long port) -+{ -+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port; -+} -+ -+unsigned long ath79_pci_swizzle_b(unsigned long port) -+{ -+ if (__ath79_pci_swizzle_b) -+ return __ath79_pci_swizzle_b(port); -+ -+ return port; -+} -+EXPORT_SYMBOL(ath79_pci_swizzle_b); -+ -+unsigned long ath79_pci_swizzle_w(unsigned long port) -+{ -+ if (__ath79_pci_swizzle_w) -+ return __ath79_pci_swizzle_w(port); -+ -+ return port; -+} -+EXPORT_SYMBOL(ath79_pci_swizzle_w); -+ - int __init ath79_register_pci(void) - { - struct platform_device *pdev = NULL; - - if (soc_is_ar71xx()) { - pdev = ath79_register_pci_ar71xx(); -+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b; -+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w; - } else if (soc_is_ar724x()) { - pdev = ath79_register_pci_ar724x(-1, - AR724X_PCI_CFG_BASE, diff --git a/target/linux/ar71xx/patches-3.8/480-ar913x_wmac_external_reset.patch b/target/linux/ar71xx/patches-3.8/480-ar913x_wmac_external_reset.patch deleted file mode 100644 index 9b704a3..0000000 --- a/target/linux/ar71xx/patches-3.8/480-ar913x_wmac_external_reset.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac - }, - }; - --static void __init ar913x_wmac_setup(void) -+static int ar913x_wmac_reset(void) - { - /* reset the WMAC */ - ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); -@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi - ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); - mdelay(10); - -+ return 0; -+} -+ -+static void __init ar913x_wmac_setup(void) -+{ -+ ar913x_wmac_reset(); -+ - ath79_wmac_resources[0].start = AR913X_WMAC_BASE; - ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; - ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); - ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); -+ -+ ath79_wmac_data.external_reset = ar913x_wmac_reset; - } - - diff --git a/target/linux/ar71xx/patches-3.8/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ar71xx/patches-3.8/490-usb-ehci-add-quirks-for-qca-socs.patch deleted file mode 100644 index 98d6c0b..0000000 --- a/target/linux/ar71xx/patches-3.8/490-usb-ehci-add-quirks-for-qca-socs.patch +++ /dev/null @@ -1,101 +0,0 @@ ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -249,6 +249,37 @@ static int ehci_reset (struct ehci_hcd * - command |= CMD_RESET; - dbg_cmd (ehci, "reset", command); - ehci_writel(ehci, command, &ehci->regs->command); -+ -+ if (ehci->qca_force_host_mode) { -+ u32 usbmode; -+ -+ udelay(1000); -+ -+ usbmode = ehci_readl(ehci, &ehci->regs->usbmode); -+ usbmode |= USBMODE_CM_HC | (1 << 4); -+ ehci_writel(ehci, usbmode, &ehci->regs->usbmode); -+ -+ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n", -+ ehci_readl(ehci, &ehci->regs->usbmode)); -+ } -+ -+ if (ehci->qca_force_16bit_ptw) { -+ u32 port_status; -+ -+ udelay(1000); -+ -+ /* enable 16-bit UTMI interface */ -+ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]); -+ port_status |= BIT(28); -+ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]); -+ -+ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n", -+ ehci_readl(ehci, &ehci->regs->port_status[0])); -+ } -+ -+ if (ehci->reset_notifier) -+ ehci->reset_notifier(ehci_to_hcd(ehci)); -+ - ehci->rh_state = EHCI_RH_HALTED; - ehci->next_statechange = jiffies; - retval = handshake (ehci, &ehci->regs->command, ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -201,6 +201,10 @@ struct ehci_hcd { /* one per controlle - unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ - unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ - unsigned ignore_oc:1; -+ unsigned qca_force_host_mode:1; -+ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */ -+ -+ void (*reset_notifier)(struct usb_hcd *hcd); - - /* required for usb32 quirk */ - #define OHCI_CTRL_HCFS (3 << 6) ---- a/include/linux/usb/ehci_pdriver.h -+++ b/include/linux/usb/ehci_pdriver.h -@@ -43,6 +43,8 @@ struct usb_ehci_pdata { - unsigned big_endian_mmio:1; - unsigned no_io_watchdog:1; - unsigned ignore_oc:1; -+ unsigned qca_force_host_mode:1; -+ unsigned qca_force_16bit_ptw:1; - - /* Turn on all power and clocks */ - int (*power_on)(struct platform_device *pdev); -@@ -51,6 +53,7 @@ struct usb_ehci_pdata { - /* Turn on only VBUS suspend power and hotplug detection, - * turn off everything else */ - void (*power_suspend)(struct platform_device *pdev); -+ void (*reset_notifier)(struct platform_device *pdev); - }; - - #endif /* __USB_CORE_EHCI_PDRIVER_H */ ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -33,6 +33,14 @@ - - static const char hcd_name[] = "ehci-platform"; - -+static void ehci_platform_reset_notifier(struct usb_hcd *hcd) -+{ -+ struct platform_device *pdev = to_platform_device(hcd->self.controller); -+ struct usb_ehci_pdata *pdata = pdev->dev.platform_data; -+ -+ pdata->reset_notifier(pdev); -+} -+ - static int ehci_platform_reset(struct usb_hcd *hcd) - { - struct platform_device *pdev = to_platform_device(hcd->self.controller); -@@ -45,6 +53,11 @@ static int ehci_platform_reset(struct us - ehci->big_endian_desc = pdata->big_endian_desc; - ehci->big_endian_mmio = pdata->big_endian_mmio; - ehci->ignore_oc = pdata->ignore_oc; -+ ehci->qca_force_host_mode = pdata->qca_force_host_mode; -+ ehci->qca_force_16bit_ptw = pdata->qca_force_16bit_ptw; -+ -+ if (pdata->reset_notifier) -+ ehci->reset_notifier = ehci_platform_reset_notifier; - - ehci->caps = hcd->regs + pdata->caps_offset; - retval = ehci_setup(hcd); diff --git a/target/linux/ar71xx/patches-3.8/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-3.8/500-MIPS-fw-myloader.patch deleted file mode 100644 index 421f6a9..0000000 --- a/target/linux/ar71xx/patches-3.8/500-MIPS-fw-myloader.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -182,6 +182,7 @@ endif - # - libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/ - libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/ -+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ - libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/ - libs-y += arch/mips/fw/lib/ - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -989,6 +989,9 @@ config MIPS_NILE4 - config MIPS_DISABLE_OBSOLETE_IDE - bool - -+config MYLOADER -+ bool -+ - config SYNC_R4K - bool - diff --git a/target/linux/ar71xx/patches-3.8/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-3.8/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch deleted file mode 100644 index d9b8682..0000000 --- a/target/linux/ar71xx/patches-3.8/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch +++ /dev/null @@ -1,81 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -15,6 +15,7 @@ - #include <linux/init.h> - #include <linux/delay.h> - #include <linux/irq.h> -+#include <linux/etherdevice.h> - #include <linux/platform_device.h> - #include <linux/ath9k_platform.h> - -@@ -22,6 +23,7 @@ - #include <asm/mach-ath79/ar71xx_regs.h> - #include "dev-wmac.h" - -+static u8 ath79_wmac_mac[ETH_ALEN]; - static struct ath9k_platform_data ath79_wmac_data; - - static struct resource ath79_wmac_resources[] = { -@@ -160,7 +162,7 @@ static void qca955x_wmac_setup(void) - ath79_wmac_data.is_clk_25mhz = true; - } - --void __init ath79_register_wmac(u8 *cal_data) -+void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) - ar913x_wmac_setup(); -@@ -177,5 +179,10 @@ void __init ath79_register_wmac(u8 *cal_ - memcpy(ath79_wmac_data.eeprom_data, cal_data, - sizeof(ath79_wmac_data.eeprom_data)); - -+ if (mac_addr) { -+ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac)); -+ ath79_wmac_data.macaddr = ath79_wmac_mac; -+ } -+ - platform_device_register(&ath79_wmac_device); - } ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -12,6 +12,6 @@ - #ifndef _ATH79_DEV_WMAC_H - #define _ATH79_DEV_WMAC_H - --void ath79_register_wmac(u8 *cal_data); -+void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); - - #endif /* _ATH79_DEV_WMAC_H */ ---- a/arch/mips/ath79/mach-ap81.c -+++ b/arch/mips/ath79/mach-ap81.c -@@ -98,7 +98,7 @@ static void __init ap81_setup(void) - ap81_gpio_keys); - ath79_register_spi(&ap81_spi_data, ap81_spi_info, - ARRAY_SIZE(ap81_spi_info)); -- ath79_register_wmac(cal_data); -+ ath79_register_wmac(cal_data, NULL); - ath79_register_usb(); - } - ---- a/arch/mips/ath79/mach-db120.c -+++ b/arch/mips/ath79/mach-db120.c -@@ -134,7 +134,7 @@ static void __init db120_setup(void) - ath79_register_spi(&db120_spi_data, db120_spi_info, - ARRAY_SIZE(db120_spi_info)); - ath79_register_usb(); -- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); -+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); - db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); - } - ---- a/arch/mips/ath79/mach-ap121.c -+++ b/arch/mips/ath79/mach-ap121.c -@@ -91,7 +91,7 @@ static void __init ap121_setup(void) - ath79_register_spi(&ap121_spi_data, ap121_spi_info, - ARRAY_SIZE(ap121_spi_info)); - ath79_register_usb(); -- ath79_register_wmac(cal_data); -+ ath79_register_wmac(cal_data, NULL); - } - - MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", diff --git a/target/linux/ar71xx/patches-3.8/502-MIPS-ath79-export-ath79_gpio_base.patch b/target/linux/ar71xx/patches-3.8/502-MIPS-ath79-export-ath79_gpio_base.patch deleted file mode 100644 index 73eb8e1..0000000 --- a/target/linux/ar71xx/patches-3.8/502-MIPS-ath79-export-ath79_gpio_base.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -25,7 +25,9 @@ - #include <asm/mach-ath79/ath79.h> - #include "common.h" - --static void __iomem *ath79_gpio_base; -+void __iomem *ath79_gpio_base; -+EXPORT_SYMBOL_GPL(ath79_gpio_base); -+ - static unsigned long ath79_gpio_count; - static DEFINE_SPINLOCK(ath79_gpio_lock); - ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -116,6 +116,7 @@ static inline int soc_is_qca955x(void) - } - - extern void __iomem *ath79_ddr_base; -+extern void __iomem *ath79_gpio_base; - extern void __iomem *ath79_pll_base; - extern void __iomem *ath79_reset_base; - diff --git a/target/linux/ar71xx/patches-3.8/503-MIPS-ath79-add-flash-acquire-release.patch b/target/linux/ar71xx/patches-3.8/503-MIPS-ath79-add-flash-acquire-release.patch deleted file mode 100644 index 06f7902..0000000 --- a/target/linux/ar71xx/patches-3.8/503-MIPS-ath79-add-flash-acquire-release.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -22,6 +22,7 @@ - #include "common.h" - - static DEFINE_SPINLOCK(ath79_device_reset_lock); -+static DEFINE_MUTEX(ath79_flash_mutex); - - u32 ath79_cpu_freq; - EXPORT_SYMBOL_GPL(ath79_cpu_freq); -@@ -111,3 +112,16 @@ void ath79_device_reset_clear(u32 mask) - spin_unlock_irqrestore(&ath79_device_reset_lock, flags); - } - EXPORT_SYMBOL_GPL(ath79_device_reset_clear); -+ -+void ath79_flash_acquire(void) -+{ -+ mutex_lock(&ath79_flash_mutex); -+} -+EXPORT_SYMBOL_GPL(ath79_flash_acquire); -+ -+void ath79_flash_release(void) -+{ -+ mutex_unlock(&ath79_flash_mutex); -+} -+EXPORT_SYMBOL_GPL(ath79_flash_release); -+ ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -143,4 +143,7 @@ static inline u32 ath79_reset_rr(unsigne - void ath79_device_reset_set(u32 mask); - void ath79_device_reset_clear(u32 mask); - -+void ath79_flash_acquire(void); -+void ath79_flash_release(void); -+ - #endif /* __ASM_MACH_ATH79_H */ diff --git a/target/linux/ar71xx/patches-3.8/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-3.8/504-MIPS-ath79-add-ath79_device_reset_get.patch deleted file mode 100644 index 024a85d..0000000 --- a/target/linux/ar71xx/patches-3.8/504-MIPS-ath79-add-ath79_device_reset_get.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -142,6 +142,7 @@ static inline u32 ath79_reset_rr(unsigne - - void ath79_device_reset_set(u32 mask); - void ath79_device_reset_clear(u32 mask); -+u32 ath79_device_reset_get(u32 mask); - - void ath79_flash_acquire(void); - void ath79_flash_release(void); ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -113,6 +113,32 @@ void ath79_device_reset_clear(u32 mask) - } - EXPORT_SYMBOL_GPL(ath79_device_reset_clear); - -+u32 ath79_device_reset_get(u32 mask) -+{ -+ unsigned long flags; -+ u32 reg; -+ u32 ret; -+ -+ if (soc_is_ar71xx()) -+ reg = AR71XX_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar724x()) -+ reg = AR724X_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar913x()) -+ reg = AR913X_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar933x()) -+ reg = AR933X_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar934x()) -+ reg = AR934X_RESET_REG_RESET_MODULE; -+ else -+ BUG(); -+ -+ spin_lock_irqsave(&ath79_device_reset_lock, flags); -+ ret = ath79_reset_rr(reg); -+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags); -+ return ret; -+} -+EXPORT_SYMBOL_GPL(ath79_device_reset_get); -+ - void ath79_flash_acquire(void) - { - mutex_lock(&ath79_flash_mutex); diff --git a/target/linux/ar71xx/patches-3.8/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-3.8/505-MIPS-ath79-add-ath79_gpio_function_select.patch deleted file mode 100644 index 9e11381..0000000 --- a/target/linux/ar71xx/patches-3.8/505-MIPS-ath79-add-ath79_gpio_function_select.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/arch/mips/ath79/common.h -+++ b/arch/mips/ath79/common.h -@@ -26,6 +26,7 @@ void ath79_ddr_wb_flush(unsigned int reg - void ath79_gpio_function_enable(u32 mask); - void ath79_gpio_function_disable(u32 mask); - void ath79_gpio_function_setup(u32 set, u32 clear); -+void ath79_gpio_output_select(unsigned gpio, u8 val); - void ath79_gpio_init(void); - - #endif /* __ATH79_COMMON_H */ ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -180,6 +180,34 @@ void ath79_gpio_function_disable(u32 mas - ath79_gpio_function_setup(0, mask); - } - -+void __init ath79_gpio_output_select(unsigned gpio, u8 val) -+{ -+ void __iomem *base = ath79_gpio_base; -+ unsigned long flags; -+ unsigned int reg; -+ u32 t, s; -+ -+ BUG_ON(!soc_is_ar934x()); -+ -+ if (gpio >= AR934X_GPIO_COUNT) -+ return; -+ -+ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4); -+ s = 8 * (gpio % 4); -+ -+ spin_lock_irqsave(&ath79_gpio_lock, flags); -+ -+ t = __raw_readl(base + reg); -+ t &= ~(0xff << s); -+ t |= val << s; -+ __raw_writel(t, base + reg); -+ -+ /* flush write */ -+ (void) __raw_readl(base + reg); -+ -+ spin_unlock_irqrestore(&ath79_gpio_lock, flags); -+} -+ - void __init ath79_gpio_init(void) - { - int err; diff --git a/target/linux/ar71xx/patches-3.8/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-3.8/506-MIPS-ath79-prom-parse-redboot-args.patch deleted file mode 100644 index aab959b..0000000 --- a/target/linux/ar71xx/patches-3.8/506-MIPS-ath79-prom-parse-redboot-args.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -19,6 +19,8 @@ - - #include "common.h" - -+static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata; -+ - static inline int is_valid_ram_addr(void *addr) - { - if (((u32) addr > KSEG0) && -@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void - return 0; - } - -+static void __init ath79_prom_append_cmdline(const char *name, -+ const char *value) -+{ -+ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf), -+ " %s=%s", name, value); -+ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline)); -+} -+ -+static const char * __init ath79_prom_find_env(char **envp, const char *name) -+{ -+ const char *ret = NULL; -+ int len; -+ char **p; -+ -+ if (!is_valid_ram_addr(envp)) -+ return NULL; -+ -+ len = strlen(name); -+ for (p = envp; is_valid_ram_addr(*p); p++) { -+ if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') { -+ ret = *p + len + 1; -+ break; -+ } -+ -+ /* RedBoot env comes in pointer pairs - key, value */ -+ if (strncmp(name, *p, len) == 0 && (*p)[len] == 0) -+ if (is_valid_ram_addr(*(++p))) { -+ ret = *p; -+ break; -+ } -+ } -+ -+ return ret; -+} -+ - static __init void ath79_prom_init_cmdline(int argc, char **argv) - { - int i; -@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli - - void __init prom_init(void) - { -+ const char *env; -+ char **envp; -+ - ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1); -+ -+ envp = (char **)fw_arg2; -+ if (!strstr(arcs_cmdline, "ethaddr=")) { -+ env = ath79_prom_find_env(envp, "ethaddr"); -+ if (env) -+ ath79_prom_append_cmdline("ethaddr", env); -+ } -+ -+ if (!strstr(arcs_cmdline, "board=")) { -+ env = ath79_prom_find_env(envp, "board"); -+ if (env) { -+ /* Workaround for buggy bootloaders */ -+ if (strcmp(env, "RouterStation") == 0 || -+ strcmp(env, "Ubiquiti AR71xx-based board") == 0) -+ env = "UBNT-RS"; -+ -+ if (strcmp(env, "RouterStation PRO") == 0) -+ env = "UBNT-RSPRO"; -+ -+ ath79_prom_append_cmdline("board", env); -+ } -+ } - } - - void __init prom_free_prom_memory(void) diff --git a/target/linux/ar71xx/patches-3.8/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-3.8/507-MIPS-ath79-prom-add-myloader-support.patch deleted file mode 100644 index 67c1faf..0000000 --- a/target/linux/ar71xx/patches-3.8/507-MIPS-ath79-prom-add-myloader-support.patch +++ /dev/null @@ -1,58 +0,0 @@ ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -16,6 +16,7 @@ - - #include <asm/bootinfo.h> - #include <asm/addrspace.h> -+#include <asm/fw/myloader/myloader.h> - - #include "common.h" - -@@ -69,6 +70,37 @@ static const char * __init ath79_prom_fi - return ret; - } - -+static int __init ath79_prom_init_myloader(void) -+{ -+ struct myloader_info *mylo; -+ char mac_buf[32]; -+ unsigned char *mac; -+ -+ mylo = myloader_get_info(); -+ if (!mylo) -+ return 0; -+ -+ switch (mylo->did) { -+ case DEVID_COMPEX_WP543: -+ ath79_prom_append_cmdline("board", "WP543"); -+ break; -+ case DEVID_COMPEX_WPE72: -+ ath79_prom_append_cmdline("board", "WPE72"); -+ break; -+ default: -+ pr_warn("prom: unknown device id: %x\n", mylo->did); -+ return 0; -+ } -+ -+ mac = mylo->macs[0]; -+ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x", -+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); -+ -+ ath79_prom_append_cmdline("ethaddr", mac_buf); -+ -+ return 1; -+} -+ - static __init void ath79_prom_init_cmdline(int argc, char **argv) - { - int i; -@@ -88,6 +120,9 @@ void __init prom_init(void) - const char *env; - char **envp; - -+ if (ath79_prom_init_myloader()) -+ return; -+ - ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1); - - envp = (char **)fw_arg2; diff --git a/target/linux/ar71xx/patches-3.8/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-3.8/508-MIPS-ath79-prom-image-command-line-hack.patch deleted file mode 100644 index 72a3b56..0000000 --- a/target/linux/ar71xx/patches-3.8/508-MIPS-ath79-prom-image-command-line-hack.patch +++ /dev/null @@ -1,57 +0,0 @@ ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi - return ret; - } - -+#ifdef CONFIG_IMAGE_CMDLINE_HACK -+extern char __image_cmdline[]; -+ -+static int __init ath79_use_image_cmdline(void) -+{ -+ char *p = __image_cmdline; -+ int replace = 0; -+ -+ if (*p == '-') { -+ replace = 1; -+ p++; -+ } -+ -+ if (*p == '\0') -+ return 0; -+ -+ if (replace) { -+ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); -+ } else { -+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); -+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); -+ } -+ -+ return 1; -+} -+#else -+static inline int ath79_use_image_cmdline(void) { return 0; } -+#endif -+ - static int __init ath79_prom_init_myloader(void) - { - struct myloader_info *mylo; -@@ -98,6 +127,8 @@ static int __init ath79_prom_init_myload - - ath79_prom_append_cmdline("ethaddr", mac_buf); - -+ ath79_use_image_cmdline(); -+ - return 1; - } - -@@ -105,6 +136,9 @@ static __init void ath79_prom_init_cmdli - { - int i; - -+ if (ath79_use_image_cmdline()) -+ return; -+ - if (!is_valid_ram_addr(argv)) - return; - diff --git a/target/linux/ar71xx/patches-3.8/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-3.8/509-MIPS-ath79-process-board-kernel-option.patch deleted file mode 100644 index 7858a90..0000000 --- a/target/linux/ar71xx/patches-3.8/509-MIPS-ath79-process-board-kernel-option.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -231,6 +231,8 @@ void __init plat_time_init(void) - mips_hpt_frequency = clk_get_rate(clk) / 2; - } - -+__setup("board=", mips_machtype_setup); -+ - static int __init ath79_setup(void) - { - ath79_gpio_init(); diff --git a/target/linux/ar71xx/patches-3.8/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-3.8/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch deleted file mode 100644 index 2d2235e..0000000 --- a/target/linux/ar71xx/patches-3.8/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -24,7 +24,10 @@ - #include "dev-wmac.h" - - static u8 ath79_wmac_mac[ETH_ALEN]; --static struct ath9k_platform_data ath79_wmac_data; -+ -+static struct ath9k_platform_data ath79_wmac_data = { -+ .led_pin = -1, -+}; - - static struct resource ath79_wmac_resources[] = { - { diff --git a/target/linux/ar71xx/patches-3.8/520-MIPS-ath79-enable-UART-function.patch b/target/linux/ar71xx/patches-3.8/520-MIPS-ath79-enable-UART-function.patch deleted file mode 100644 index 1cb407f..0000000 --- a/target/linux/ar71xx/patches-3.8/520-MIPS-ath79-enable-UART-function.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -87,6 +87,15 @@ void __init ath79_register_uart(void) - if (IS_ERR(clk)) - panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); - -+ if (soc_is_ar71xx()) -+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN); -+ else if (soc_is_ar724x()) -+ ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN); -+ else if (soc_is_ar913x()) -+ ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN); -+ else if (soc_is_ar933x()) -+ ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN); -+ - if (soc_is_ar71xx() || - soc_is_ar724x() || - soc_is_ar913x() || diff --git a/target/linux/ar71xx/patches-3.8/521-MIPS-ath79-enable-UART-for-early_serial.patch b/target/linux/ar71xx/patches-3.8/521-MIPS-ath79-enable-UART-for-early_serial.patch deleted file mode 100644 index 3d6ddfe..0000000 --- a/target/linux/ar71xx/patches-3.8/521-MIPS-ath79-enable-UART-for-early_serial.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/arch/mips/ath79/early_printk.c -+++ b/arch/mips/ath79/early_printk.c -@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned - /* nothing to do */ - } - -+static void prom_enable_uart(u32 id) -+{ -+ void __iomem *gpio_base; -+ u32 uart_en; -+ u32 t; -+ -+ switch (id) { -+ case REV_ID_MAJOR_AR71XX: -+ uart_en = AR71XX_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR7240: -+ case REV_ID_MAJOR_AR7241: -+ case REV_ID_MAJOR_AR7242: -+ uart_en = AR724X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR913X: -+ uart_en = AR913X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR9330: -+ case REV_ID_MAJOR_AR9331: -+ uart_en = AR933X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR9341: -+ case REV_ID_MAJOR_AR9342: -+ case REV_ID_MAJOR_AR9344: -+ /* TODO */ -+ default: -+ return; -+ } -+ -+ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE)); -+ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC); -+ t |= uart_en; -+ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC); -+} -+ - static void prom_putchar_init(void) - { - void __iomem *base; -@@ -86,8 +126,10 @@ static void prom_putchar_init(void) - - default: - _prom_putchar = prom_putchar_dummy; -- break; -+ return; - } -+ -+ prom_enable_uart(id); - } - - void prom_putchar(unsigned char ch) diff --git a/target/linux/ar71xx/patches-3.8/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch b/target/linux/ar71xx/patches-3.8/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch deleted file mode 100644 index 74928e6..0000000 --- a/target/linux/ar71xx/patches-3.8/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -189,3 +189,9 @@ void __init ath79_register_wmac(u8 *cal_ - - platform_device_register(&ath79_wmac_device); - } -+ -+void __init ath79_register_wmac_simple(void) -+{ -+ ath79_register_wmac(NULL, NULL); -+ ath79_wmac_data.eeprom_name = "soc_wmac.eeprom"; -+} ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -13,5 +13,6 @@ - #define _ATH79_DEV_WMAC_H - - void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); -+void ath79_register_wmac_simple(void); - - #endif /* _ATH79_DEV_WMAC_H */ diff --git a/target/linux/ar71xx/patches-3.8/523-MIPS-ath79-OTP-support.patch b/target/linux/ar71xx/patches-3.8/523-MIPS-ath79-OTP-support.patch deleted file mode 100644 index 0672cf1..0000000 --- a/target/linux/ar71xx/patches-3.8/523-MIPS-ath79-OTP-support.patch +++ /dev/null @@ -1,166 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -165,6 +165,137 @@ static void qca955x_wmac_setup(void) - ath79_wmac_data.is_clk_25mhz = true; - } - -+static bool __init -+ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data) -+{ -+ int timeout = 1000; -+ u32 val; -+ -+ __raw_readl(base + AR9300_OTP_BASE + (4 * addr)); -+ while (timeout--) { -+ val = __raw_readl(base + AR9300_OTP_STATUS); -+ if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID) -+ break; -+ -+ udelay(10); -+ } -+ -+ if (!timeout) -+ return false; -+ -+ *data = __raw_readl(base + AR9300_OTP_READ_DATA); -+ return true; -+} -+ -+static bool __init -+ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len) -+{ -+ u32 data; -+ int i; -+ -+ for (i = 0; i < len; i++) { -+ int offset = 8 * ((addr - i) % 4); -+ -+ if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data)) -+ return false; -+ -+ dest[i] = (data >> offset) & 0xff; -+ } -+ -+ return true; -+} -+ -+static bool __init -+ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest, -+ int dest_start, int dest_len) -+{ -+ int dest_bytes = 0; -+ int offset = 0; -+ int end = addr - len; -+ u8 hdr[2]; -+ -+ while (addr > end) { -+ if (!ar93xx_wmac_otp_read(base, addr, hdr, 2)) -+ return false; -+ -+ addr -= 2; -+ offset += hdr[0]; -+ -+ if (offset <= dest_start + dest_len && -+ offset + len >= dest_start) { -+ int data_offset = 0; -+ int dest_offset = 0; -+ int copy_len; -+ -+ if (offset < dest_start) -+ data_offset = dest_start - offset; -+ else -+ dest_offset = offset - dest_start; -+ -+ copy_len = len - data_offset; -+ if (copy_len > dest_len - dest_offset) -+ copy_len = dest_len - dest_offset; -+ -+ ar93xx_wmac_otp_read(base, addr - data_offset, -+ dest + dest_offset, -+ copy_len); -+ -+ dest_bytes += copy_len; -+ } -+ addr -= hdr[1]; -+ } -+ return !!dest_bytes; -+} -+ -+bool __init ar93xx_wmac_read_mac_address(u8 *dest) -+{ -+ void __iomem *base; -+ bool ret = false; -+ int addr = 0x1ff; -+ unsigned int len; -+ u32 hdr_u32; -+ u8 *hdr = (u8 *) &hdr_u32; -+ u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 }; -+ int mac_start = 2, mac_end = 8; -+ -+ BUG_ON(!soc_is_ar933x() && !soc_is_ar934x()); -+ base = ioremap_nocache(AR933X_WMAC_BASE, AR933X_WMAC_SIZE); -+ while (addr > sizeof(hdr)) { -+ if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr))) -+ break; -+ -+ if (hdr_u32 == 0 || hdr_u32 == ~0) -+ break; -+ -+ len = (hdr[1] << 4) | (hdr[2] >> 4); -+ addr -= 4; -+ -+ switch (hdr[0] >> 5) { -+ case 0: -+ if (len < mac_end) -+ break; -+ -+ ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6); -+ ret = true; -+ break; -+ case 3: -+ ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac, -+ mac_start, 6); -+ break; -+ default: -+ break; -+ } -+ -+ addr -= len + 2; -+ } -+ -+ iounmap(base); -+ if (ret) -+ memcpy(dest, mac, 6); -+ -+ return ret; -+} -+ - void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -14,5 +14,6 @@ - - void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); - void ath79_register_wmac_simple(void); -+bool ar93xx_wmac_read_mac_address(u8 *dest); - - #endif /* _ATH79_DEV_WMAC_H */ ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -113,6 +113,14 @@ - #define QCA955X_EHCI1_BASE 0x1b400000 - #define QCA955X_EHCI_SIZE 0x1000 - -+#define AR9300_OTP_BASE 0x14000 -+#define AR9300_OTP_STATUS 0x15f18 -+#define AR9300_OTP_STATUS_TYPE 0x7 -+#define AR9300_OTP_STATUS_VALID 0x4 -+#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 -+#define AR9300_OTP_STATUS_SM_BUSY 0x1 -+#define AR9300_OTP_READ_DATA 0x15f1c -+ - /* - * DDR_CTRL block - */ diff --git a/target/linux/ar71xx/patches-3.8/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch b/target/linux/ar71xx/patches-3.8/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch deleted file mode 100644 index 7b4b6ef..0000000 --- a/target/linux/ar71xx/patches-3.8/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -296,6 +296,16 @@ bool __init ar93xx_wmac_read_mac_address - return ret; - } - -+void __init ath79_wmac_disable_2ghz(void) -+{ -+ ath79_wmac_data.disable_2ghz = true; -+} -+ -+void __init ath79_wmac_disable_5ghz(void) -+{ -+ ath79_wmac_data.disable_5ghz = true; -+} -+ - void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -14,6 +14,9 @@ - - void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); - void ath79_register_wmac_simple(void); -+void ath79_wmac_disable_2ghz(void); -+void ath79_wmac_disable_5ghz(void); -+ - bool ar93xx_wmac_read_mac_address(u8 *dest); - - #endif /* _ATH79_DEV_WMAC_H */ diff --git a/target/linux/ar71xx/patches-3.8/525-MIPS-ath79-enable-qca-usb-quirks.patch b/target/linux/ar71xx/patches-3.8/525-MIPS-ath79-enable-qca-usb-quirks.patch deleted file mode 100644 index ede8035..0000000 --- a/target/linux/ar71xx/patches-3.8/525-MIPS-ath79-enable-qca-usb-quirks.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -182,14 +182,34 @@ static void __init ar933x_usb_setup(void - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - --static void __init ar934x_usb_setup(void) -+static void enable_tx_tx_idp_violation_fix(unsigned base) - { -- u32 bootstrap; -+ void __iomem *phy_reg; -+ u32 t; -+ -+ phy_reg = ioremap(base, 4); -+ if (!phy_reg) -+ return; -+ -+ t = ioread32(phy_reg); -+ t &= ~0xff; -+ t |= 0x58; -+ iowrite32(t, phy_reg); -+ -+ iounmap(phy_reg); -+} - -- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); -- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) -+static void ar934x_usb_reset_notifier(struct platform_device *pdev) -+{ -+ if (pdev->id != -1) - return; - -+ enable_tx_tx_idp_violation_fix(0x18116c94); -+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n"); -+} -+ -+static void __init ar934x_usb_setup(void) -+{ - ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE); - udelay(1000); - -@@ -202,14 +222,44 @@ static void __init ar934x_usb_setup(void - ath79_device_reset_clear(AR934X_RESET_USB_HOST); - udelay(1000); - -+ ath79_ehci_pdata_v2.qca_force_host_mode = 1; -+ ath79_ehci_pdata_v2.qca_force_16bit_ptw = 1; -+ if (ath79_soc_rev >= 3) -+ ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier; -+ - ath79_usb_register("ehci-platform", -1, - AR934X_EHCI_BASE, AR934X_EHCI_SIZE, - ATH79_CPU_IRQ(3), - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - -+static void qca955x_usb_reset_notifier(struct platform_device *pdev) -+{ -+ u32 base; -+ -+ switch (pdev->id) { -+ case 0: -+ base = 0x18116c94; -+ break; -+ -+ case 1: -+ base = 0x18116e54; -+ break; -+ -+ default: -+ return; -+ } -+ -+ enable_tx_tx_idp_violation_fix(base); -+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n"); -+} -+ - static void __init qca955x_usb_setup(void) - { -+ ath79_ehci_pdata_v2.qca_force_host_mode = 1; -+ ath79_ehci_pdata_v2.qca_force_16bit_ptw = 1; -+ ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier; -+ - ath79_usb_register("ehci-platform", 0, - QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, - ATH79_IP3_IRQ(0), diff --git a/target/linux/ar71xx/patches-3.8/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-3.8/601-MIPS-ath79-add-more-register-defines.patch deleted file mode 100644 index 014c769..0000000 --- a/target/linux/ar71xx/patches-3.8/601-MIPS-ath79-add-more-register-defines.patch +++ /dev/null @@ -1,354 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -21,6 +21,10 @@ - #include <linux/bitops.h> - - #define AR71XX_APB_BASE 0x18000000 -+#define AR71XX_GE0_BASE 0x19000000 -+#define AR71XX_GE0_SIZE 0x10000 -+#define AR71XX_GE1_BASE 0x1a000000 -+#define AR71XX_GE1_SIZE 0x10000 - #define AR71XX_EHCI_BASE 0x1b000000 - #define AR71XX_EHCI_SIZE 0x1000 - #define AR71XX_OHCI_BASE 0x1c000000 -@@ -40,6 +44,8 @@ - #define AR71XX_PLL_SIZE 0x100 - #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) - #define AR71XX_RESET_SIZE 0x100 -+#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR71XX_MII_SIZE 0x100 - - #define AR71XX_PCI_MEM_BASE 0x10000000 - #define AR71XX_PCI_MEM_SIZE 0x07000000 -@@ -82,15 +88,21 @@ - - #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) - #define AR933X_UART_SIZE 0x14 -+#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR933X_GMAC_SIZE 0x04 - #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define AR933X_WMAC_SIZE 0x20000 - #define AR933X_EHCI_BASE 0x1b000000 - #define AR933X_EHCI_SIZE 0x1000 - -+#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR934X_GMAC_SIZE 0x14 - #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define AR934X_WMAC_SIZE 0x20000 - #define AR934X_EHCI_BASE 0x1b000000 - #define AR934X_EHCI_SIZE 0x200 -+#define AR934X_NFC_BASE 0x1b000200 -+#define AR934X_NFC_SIZE 0xb8 - #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) - #define AR934X_SRIF_SIZE 0x1000 - -@@ -107,11 +119,15 @@ - #define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) - #define QCA955X_PCI_CTRL_SIZE 0x100 - -+#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define QCA955X_GMAC_SIZE 0x40 - #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define QCA955X_WMAC_SIZE 0x20000 - #define QCA955X_EHCI0_BASE 0x1b000000 - #define QCA955X_EHCI1_BASE 0x1b400000 - #define QCA955X_EHCI_SIZE 0x1000 -+#define QCA955X_NFC_BASE 0x1b800200 -+#define QCA955X_NFC_SIZE 0xb8 - - #define AR9300_OTP_BASE 0x14000 - #define AR9300_OTP_STATUS 0x15f18 -@@ -175,6 +191,9 @@ - #define AR71XX_AHB_DIV_SHIFT 20 - #define AR71XX_AHB_DIV_MASK 0x7 - -+#define AR71XX_ETH0_PLL_SHIFT 17 -+#define AR71XX_ETH1_PLL_SHIFT 19 -+ - #define AR724X_PLL_REG_CPU_CONFIG 0x00 - #define AR724X_PLL_REG_PCIE_CONFIG 0x18 - -@@ -187,6 +206,8 @@ - #define AR724X_DDR_DIV_SHIFT 22 - #define AR724X_DDR_DIV_MASK 0x3 - -+#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c -+ - #define AR913X_PLL_REG_CPU_CONFIG 0x00 - #define AR913X_PLL_REG_ETH_CONFIG 0x04 - #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14 -@@ -199,6 +220,9 @@ - #define AR913X_AHB_DIV_SHIFT 19 - #define AR913X_AHB_DIV_MASK 0x1 - -+#define AR913X_ETH0_PLL_SHIFT 20 -+#define AR913X_ETH1_PLL_SHIFT 22 -+ - #define AR933X_PLL_CPU_CONFIG_REG 0x00 - #define AR933X_PLL_CLOCK_CTRL_REG 0x08 - -@@ -220,6 +244,8 @@ - #define AR934X_PLL_CPU_CONFIG_REG 0x00 - #define AR934X_PLL_DDR_CONFIG_REG 0x04 - #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08 -+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24 -+#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c - - #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 - #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -@@ -252,9 +278,13 @@ - #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) - #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6) -+ - #define QCA955X_PLL_CPU_CONFIG_REG 0x00 - #define QCA955X_PLL_DDR_CONFIG_REG 0x04 - #define QCA955X_PLL_CLK_CTRL_REG 0x08 -+#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28 -+#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48 - - #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 - #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -@@ -379,16 +409,83 @@ - #define AR913X_RESET_USB_HOST BIT(5) - #define AR913X_RESET_USB_PHY BIT(4) - -+#define AR933X_RESET_GE1_MDIO BIT(23) -+#define AR933X_RESET_GE0_MDIO BIT(22) -+#define AR933X_RESET_GE1_MAC BIT(13) - #define AR933X_RESET_WMAC BIT(11) -+#define AR933X_RESET_GE0_MAC BIT(9) - #define AR933X_RESET_USB_HOST BIT(5) - #define AR933X_RESET_USB_PHY BIT(4) - #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) - -+#define AR934X_RESET_HOST BIT(31) -+#define AR934X_RESET_SLIC BIT(30) -+#define AR934X_RESET_HDMA BIT(29) -+#define AR934X_RESET_EXTERNAL BIT(28) -+#define AR934X_RESET_RTC BIT(27) -+#define AR934X_RESET_PCIE_EP_INT BIT(26) -+#define AR934X_RESET_CHKSUM_ACC BIT(25) -+#define AR934X_RESET_FULL_CHIP BIT(24) -+#define AR934X_RESET_GE1_MDIO BIT(23) -+#define AR934X_RESET_GE0_MDIO BIT(22) -+#define AR934X_RESET_CPU_NMI BIT(21) -+#define AR934X_RESET_CPU_COLD BIT(20) -+#define AR934X_RESET_HOST_RESET_INT BIT(19) -+#define AR934X_RESET_PCIE_EP BIT(18) -+#define AR934X_RESET_UART1 BIT(17) -+#define AR934X_RESET_DDR BIT(16) -+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -+#define AR934X_RESET_NANDF BIT(14) -+#define AR934X_RESET_GE1_MAC BIT(13) -+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) - #define AR934X_RESET_USB_PHY_ANALOG BIT(11) -+#define AR934X_RESET_HOST_DMA_INT BIT(10) -+#define AR934X_RESET_GE0_MAC BIT(9) -+#define AR934X_RESET_ETH_SWITCH BIT(8) -+#define AR934X_RESET_PCIE_PHY BIT(7) -+#define AR934X_RESET_PCIE BIT(6) - #define AR934X_RESET_USB_HOST BIT(5) - #define AR934X_RESET_USB_PHY BIT(4) - #define AR934X_RESET_USBSUS_OVERRIDE BIT(3) -+#define AR934X_RESET_LUT BIT(2) -+#define AR934X_RESET_MBOX BIT(1) -+#define AR934X_RESET_I2S BIT(0) -+ -+#define QCA955X_RESET_HOST BIT(31) -+#define QCA955X_RESET_SLIC BIT(30) -+#define QCA955X_RESET_HDMA BIT(29) -+#define QCA955X_RESET_EXTERNAL BIT(28) -+#define QCA955X_RESET_RTC BIT(27) -+#define QCA955X_RESET_PCIE_EP_INT BIT(26) -+#define QCA955X_RESET_CHKSUM_ACC BIT(25) -+#define QCA955X_RESET_FULL_CHIP BIT(24) -+#define QCA955X_RESET_GE1_MDIO BIT(23) -+#define QCA955X_RESET_GE0_MDIO BIT(22) -+#define QCA955X_RESET_CPU_NMI BIT(21) -+#define QCA955X_RESET_CPU_COLD BIT(20) -+#define QCA955X_RESET_HOST_RESET_INT BIT(19) -+#define QCA955X_RESET_PCIE_EP BIT(18) -+#define QCA955X_RESET_UART1 BIT(17) -+#define QCA955X_RESET_DDR BIT(16) -+#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -+#define QCA955X_RESET_NANDF BIT(14) -+#define QCA955X_RESET_GE1_MAC BIT(13) -+#define QCA955X_RESET_SGMII_ANALOG BIT(12) -+#define QCA955X_RESET_USB_PHY_ANALOG BIT(11) -+#define QCA955X_RESET_HOST_DMA_INT BIT(10) -+#define QCA955X_RESET_GE0_MAC BIT(9) -+#define QCA955X_RESET_SGMII BIT(8) -+#define QCA955X_RESET_PCIE_PHY BIT(7) -+#define QCA955X_RESET_PCIE BIT(6) -+#define QCA955X_RESET_USB_HOST BIT(5) -+#define QCA955X_RESET_USB_PHY BIT(4) -+#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3) -+#define QCA955X_RESET_LUT BIT(2) -+#define QCA955X_RESET_MBOX BIT(1) -+#define QCA955X_RESET_I2S BIT(0) - -+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) -+#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) - #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) - - #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) -@@ -530,6 +627,12 @@ - #define AR71XX_GPIO_REG_INT_ENABLE 0x24 - #define AR71XX_GPIO_REG_FUNC 0x28 - -+#define AR934X_GPIO_REG_OUT_FUNC0 0x2c -+#define AR934X_GPIO_REG_OUT_FUNC1 0x30 -+#define AR934X_GPIO_REG_OUT_FUNC2 0x34 -+#define AR934X_GPIO_REG_OUT_FUNC3 0x38 -+#define AR934X_GPIO_REG_OUT_FUNC4 0x3c -+#define AR934X_GPIO_REG_OUT_FUNC5 0x40 - #define AR934X_GPIO_REG_FUNC 0x6c - - #define AR71XX_GPIO_COUNT 16 -@@ -561,4 +664,144 @@ - #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13 - #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7 - -+#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) -+#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) -+#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) -+#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) -+#define AR71XX_GPIO_FUNC_UART_EN BIT(8) -+#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) -+#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) -+ -+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) -+#define AR724X_GPIO_FUNC_SPI_EN BIT(18) -+#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -+#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -+#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) -+#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) -+#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) -+#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) -+#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -+#define AR724X_GPIO_FUNC_UART_EN BIT(1) -+#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) -+ -+#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) -+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) -+#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) -+#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19) -+#define AR913X_GPIO_FUNC_I2S1_EN BIT(18) -+#define AR913X_GPIO_FUNC_I2S0_EN BIT(17) -+#define AR913X_GPIO_FUNC_SLIC_EN BIT(16) -+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9) -+#define AR913X_GPIO_FUNC_UART_EN BIT(8) -+#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4) -+ -+#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) -+#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) -+#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) -+#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) -+#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) -+#define AR933X_GPIO_FUNC_SPI_EN BIT(18) -+#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -+#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -+#define AR933X_GPIO_FUNC_UART_EN BIT(1) -+#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) -+ -+#define AR934X_GPIO_FUNC_CLK_OBS7_EN BIT(9) -+#define AR934X_GPIO_FUNC_CLK_OBS6_EN BIT(8) -+#define AR934X_GPIO_FUNC_CLK_OBS5_EN BIT(7) -+#define AR934X_GPIO_FUNC_CLK_OBS4_EN BIT(6) -+#define AR934X_GPIO_FUNC_CLK_OBS3_EN BIT(5) -+#define AR934X_GPIO_FUNC_CLK_OBS2_EN BIT(4) -+#define AR934X_GPIO_FUNC_CLK_OBS1_EN BIT(3) -+#define AR934X_GPIO_FUNC_CLK_OBS0_EN BIT(2) -+#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1) -+ -+#define AR934X_GPIO_OUT_GPIO 0 -+#define AR934X_GPIO_OUT_LED_LINK0 41 -+#define AR934X_GPIO_OUT_LED_LINK1 42 -+#define AR934X_GPIO_OUT_LED_LINK2 43 -+#define AR934X_GPIO_OUT_LED_LINK3 44 -+#define AR934X_GPIO_OUT_LED_LINK4 45 -+ -+/* -+ * MII_CTRL block -+ */ -+#define AR71XX_MII_REG_MII0_CTRL 0x00 -+#define AR71XX_MII_REG_MII1_CTRL 0x04 -+ -+#define AR71XX_MII_CTRL_IF_MASK 3 -+#define AR71XX_MII_CTRL_SPEED_SHIFT 4 -+#define AR71XX_MII_CTRL_SPEED_MASK 3 -+#define AR71XX_MII_CTRL_SPEED_10 0 -+#define AR71XX_MII_CTRL_SPEED_100 1 -+#define AR71XX_MII_CTRL_SPEED_1000 2 -+ -+#define AR71XX_MII0_CTRL_IF_GMII 0 -+#define AR71XX_MII0_CTRL_IF_MII 1 -+#define AR71XX_MII0_CTRL_IF_RGMII 2 -+#define AR71XX_MII0_CTRL_IF_RMII 3 -+ -+#define AR71XX_MII1_CTRL_IF_RGMII 0 -+#define AR71XX_MII1_CTRL_IF_RMII 1 -+ -+/* -+ * AR933X GMAC interface -+ */ -+#define AR933X_GMAC_REG_ETH_CFG 0x00 -+ -+#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) -+#define AR933X_ETH_CFG_MII_GE0 BIT(1) -+#define AR933X_ETH_CFG_GMII_GE0 BIT(2) -+#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) -+#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) -+#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) -+#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) -+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) -+#define AR933X_ETH_CFG_RMII_GE0 BIT(9) -+#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 -+#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) -+ -+/* -+ * AR934X GMAC Interface -+ */ -+#define AR934X_GMAC_REG_ETH_CFG 0x00 -+ -+#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) -+#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) -+#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) -+#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) -+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) -+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) -+#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) -+#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) -+#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) -+#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) -+#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) -+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) -+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) -+ -+/* -+ * QCA955X GMAC Interface -+ */ -+ -+#define QCA955X_GMAC_REG_ETH_CFG 0x00 -+ -+#define QCA955X_ETH_CFG_RGMII_EN BIT(0) -+#define QCA955X_ETH_CFG_GE0_SGMII BIT(6) -+ - #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ar71xx/patches-3.8/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-3.8/602-MIPS-ath79-add-openwrt-stuff.patch deleted file mode 100644 index da284e2..0000000 --- a/target/linux/ar71xx/patches-3.8/602-MIPS-ath79-add-openwrt-stuff.patch +++ /dev/null @@ -1,76 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -106,6 +106,20 @@ config SOC_QCA955X - select PCI_AR724X if PCI - def_bool n - -+config ATH79_DEV_M25P80 -+ select ATH79_DEV_SPI -+ def_bool n -+ -+config ATH79_DEV_AP9X_PCI -+ select ATH79_PCI_ATH9K_FIXUP -+ def_bool n -+ -+config ATH79_DEV_DSA -+ def_bool n -+ -+config ATH79_DEV_ETH -+ def_bool n -+ - config PCI_AR724X - def_bool n - -@@ -115,6 +129,10 @@ config ATH79_DEV_GPIO_BUTTONS - config ATH79_DEV_LEDS_GPIO - def_bool n - -+config ATH79_DEV_NFC -+ depends on (SOC_AR934X || SOC_QCA955X) -+ def_bool n -+ - config ATH79_DEV_SPI - def_bool n - -@@ -125,4 +143,13 @@ config ATH79_DEV_WMAC - depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) - def_bool n - -+config ATH79_NVRAM -+ def_bool n -+ -+config ATH79_PCI_ATH9K_FIXUP -+ def_bool n -+ -+config ATH79_ROUTERBOOT -+ def_bool n -+ - endif ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -17,13 +17,25 @@ obj-$(CONFIG_PCI) += pci.o - # Devices - # - obj-y += dev-common.o -+obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o -+obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o -+obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o - obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o - obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o -+obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o -+obj-$(CONFIG_ATH79_DEV_NFC) += dev-nfc.o - obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o - obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o - obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o - - # -+# Miscellaneous objects -+# -+obj-$(CONFIG_ATH79_NVRAM) += nvram.o -+obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o -+obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o -+ -+# - # Machines - # - obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o diff --git a/target/linux/ar71xx/patches-3.8/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-3.8/603-MIPS-ath79-ap121-fixes.patch deleted file mode 100644 index a51f587..0000000 --- a/target/linux/ar71xx/patches-3.8/603-MIPS-ath79-ap121-fixes.patch +++ /dev/null @@ -1,163 +0,0 @@ ---- a/arch/mips/ath79/mach-ap121.c -+++ b/arch/mips/ath79/mach-ap121.c -@@ -1,19 +1,21 @@ - /* - * Atheros AP121 board support - * -- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - --#include "machtypes.h" -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" -+#include "dev-m25p80.h" - #include "dev-spi.h" - #include "dev-usb.h" - #include "dev-wmac.h" -+#include "machtypes.h" - - #define AP121_GPIO_LED_WLAN 0 - #define AP121_GPIO_LED_USB 1 -@@ -24,7 +26,14 @@ - #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ - #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) - --#define AP121_CAL_DATA_ADDR 0x1fff1000 -+#define AP121_MAC0_OFFSET 0x0000 -+#define AP121_MAC1_OFFSET 0x0006 -+#define AP121_CALDATA_OFFSET 0x1000 -+#define AP121_WMAC_MAC_OFFSET 0x1002 -+ -+#define AP121_MINI_GPIO_LED_WLAN 0 -+#define AP121_MINI_GPIO_BTN_JUMPSTART 12 -+#define AP121_MINI_GPIO_BTN_RESET 11 - - static struct gpio_led ap121_leds_gpio[] __initdata = { - { -@@ -58,41 +67,78 @@ static struct gpio_keys_button ap121_gpi - } - }; - --static struct ath79_spi_controller_data ap121_spi0_data = { -- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -- .cs_line = 0, -+static struct gpio_led ap121_mini_leds_gpio[] __initdata = { -+ { -+ .name = "ap121:green:wlan", -+ .gpio = AP121_MINI_GPIO_LED_WLAN, -+ .active_low = 0, -+ }, - }; - --static struct spi_board_info ap121_spi_info[] = { -+static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = { - { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l1606e", -- .controller_data = &ap121_spi0_data, -+ .desc = "jumpstart button", -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART, -+ .active_low = 1, -+ }, -+ { -+ .desc = "reset button", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = AP121_MINI_GPIO_BTN_RESET, -+ .active_low = 1, - } - }; - --static struct ath79_spi_platform_data ap121_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -+static void __init ap121_common_setup(void) -+{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ ath79_register_wmac(art + AP121_CALDATA_OFFSET, -+ art + AP121_WMAC_MAC_OFFSET); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0); -+ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0); -+ -+ ath79_register_mdio(0, 0x0); -+ -+ /* LAN ports */ -+ ath79_register_eth(1); -+ -+ /* WAN port */ -+ ath79_register_eth(0); -+} - - static void __init ap121_setup(void) - { -- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR); -+ ap121_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), - ap121_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap121_gpio_keys), - ap121_gpio_keys); -- -- ath79_register_spi(&ap121_spi_data, ap121_spi_info, -- ARRAY_SIZE(ap121_spi_info)); - ath79_register_usb(); -- ath79_register_wmac(cal_data, NULL); - } - - MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", - ap121_setup); -+ -+static void __init ap121_mini_setup(void) -+{ -+ ap121_common_setup(); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio), -+ ap121_mini_leds_gpio); -+ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ap121_mini_gpio_keys), -+ ap121_mini_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI", -+ ap121_mini_setup); ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi - config ATH79_MACH_AP121 - bool "Atheros AP121 reference board" - select SOC_AR933X -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -17,6 +17,7 @@ - enum ath79_mach_type { - ATH79_MACH_GENERIC = 0, - ATH79_MACH_AP121, /* Atheros AP121 reference board */ -+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ diff --git a/target/linux/ar71xx/patches-3.8/604-MIPS-ath79-ap81-fixes.patch b/target/linux/ar71xx/patches-3.8/604-MIPS-ath79-ap81-fixes.patch deleted file mode 100644 index 3cc012d..0000000 --- a/target/linux/ar71xx/patches-3.8/604-MIPS-ath79-ap81-fixes.patch +++ /dev/null @@ -1,128 +0,0 @@ ---- a/arch/mips/ath79/mach-ap81.c -+++ b/arch/mips/ath79/mach-ap81.c -@@ -9,12 +9,16 @@ - * by the Free Software Foundation. - */ - --#include "machtypes.h" --#include "dev-wmac.h" -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+ -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" --#include "dev-spi.h" -+#include "dev-m25p80.h" - #include "dev-usb.h" -+#include "dev-wmac.h" -+#include "machtypes.h" - - #define AP81_GPIO_LED_STATUS 1 - #define AP81_GPIO_LED_AOSS 3 -@@ -29,6 +33,37 @@ - - #define AP81_CAL_DATA_ADDR 0x1fff1000 - -+static struct mtd_partition ap81_partitions[] = { -+ { -+ .name = "u-boot", -+ .offset = 0, -+ .size = 0x040000, -+ .mask_flags = MTD_WRITEABLE, -+ }, { -+ .name = "u-boot-env", -+ .offset = 0x040000, -+ .size = 0x010000, -+ }, { -+ .name = "rootfs", -+ .offset = 0x050000, -+ .size = 0x500000, -+ }, { -+ .name = "uImage", -+ .offset = 0x550000, -+ .size = 0x100000, -+ }, { -+ .name = "ART", -+ .offset = 0x650000, -+ .size = 0x1b0000, -+ .mask_flags = MTD_WRITEABLE, -+ } -+}; -+ -+static struct flash_platform_data ap81_flash_data = { -+ .parts = ap81_partitions, -+ .nr_parts = ARRAY_SIZE(ap81_partitions), -+}; -+ - static struct gpio_led ap81_leds_gpio[] __initdata = { - { - .name = "ap81:green:status", -@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio - } - }; - --static struct ath79_spi_controller_data ap81_spi0_data = { -- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -- .cs_line = 0, --}; -- --static struct spi_board_info ap81_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "m25p64", -- .controller_data = &ap81_spi0_data, -- } --}; -- --static struct ath79_spi_platform_data ap81_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -- - static void __init ap81_setup(void) - { - u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR); -@@ -96,10 +111,24 @@ static void __init ap81_setup(void) - ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap81_gpio_keys), - ap81_gpio_keys); -- ath79_register_spi(&ap81_spi_data, ap81_spi_info, -- ARRAY_SIZE(ap81_spi_info)); -+ ath79_register_m25p80(&ap81_flash_data); - ath79_register_wmac(cal_data, NULL); - ath79_register_usb(); -+ -+ ath79_register_mdio(0, 0x0); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0); -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ath79_eth0_data.speed = SPEED_100; -+ ath79_eth0_data.duplex = DUPLEX_FULL; -+ ath79_eth0_data.has_ar8216 = 1; -+ -+ ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1); -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ath79_eth1_data.phy_mask = 0x10; -+ -+ ath79_register_eth(0); -+ ath79_register_eth(1); - } - - MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board", ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -30,9 +30,10 @@ config ATH79_MACH_AP136 - config ATH79_MACH_AP81 - bool "Atheros AP81 reference board" - select SOC_AR913X -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help diff --git a/target/linux/ar71xx/patches-3.8/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.8/605-MIPS-ath79-db120-fixes.patch deleted file mode 100644 index 0ca7861..0000000 --- a/target/linux/ar71xx/patches-3.8/605-MIPS-ath79-db120-fixes.patch +++ /dev/null @@ -1,209 +0,0 @@ ---- a/arch/mips/ath79/mach-db120.c -+++ b/arch/mips/ath79/mach-db120.c -@@ -2,7 +2,7 @@ - * Atheros DB120 reference board support - * - * Copyright (c) 2011 Qualcomm Atheros -- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above -@@ -19,16 +19,26 @@ - */ - - #include <linux/pci.h> -+#include <linux/phy.h> -+#include <linux/platform_device.h> - #include <linux/ath9k_platform.h> -+#include <linux/ar8216_platform.h> - --#include "machtypes.h" -+#include <asm/mach-ath79/ar71xx_regs.h> -+ -+#include "common.h" -+#include "dev-ap9x-pci.h" -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" -+#include "dev-m25p80.h" -+#include "dev-nfc.h" - #include "dev-spi.h" - #include "dev-usb.h" - #include "dev-wmac.h" --#include "pci.h" -+#include "machtypes.h" - -+#define DB120_GPIO_LED_USB 11 - #define DB120_GPIO_LED_WLAN_5G 12 - #define DB120_GPIO_LED_WLAN_2G 13 - #define DB120_GPIO_LED_STATUS 14 -@@ -39,8 +49,10 @@ - #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ - #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) - --#define DB120_WMAC_CALDATA_OFFSET 0x1000 --#define DB120_PCIE_CALDATA_OFFSET 0x5000 -+#define DB120_MAC0_OFFSET 0 -+#define DB120_MAC1_OFFSET 6 -+#define DB120_WMAC_CALDATA_OFFSET 0x1000 -+#define DB120_PCIE_CALDATA_OFFSET 0x5000 - - static struct gpio_led db120_leds_gpio[] __initdata = { - { -@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[] - .gpio = DB120_GPIO_LED_WLAN_2G, - .active_low = 1, - }, -+ { -+ .name = "db120:green:usb", -+ .gpio = DB120_GPIO_LED_USB, -+ .active_low = 1, -+ } - }; - - static struct gpio_keys_button db120_gpio_keys[] __initdata = { -@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi - }, - }; - --static struct ath79_spi_controller_data db120_spi0_data = { -- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -- .cs_line = 0, -+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = { -+ .mode = AR8327_PAD_MAC_RGMII, -+ .txclk_delay_en = true, -+ .rxclk_delay_en = true, -+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, -+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, - }; - --static struct spi_board_info db120_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "s25sl064a", -- .controller_data = &db120_spi0_data, -- } -+static struct ar8327_led_cfg db120_ar8327_led_cfg = { -+ .led_ctrl0 = 0x00000000, -+ .led_ctrl1 = 0xc737c737, -+ .led_ctrl2 = 0x00000000, -+ .led_ctrl3 = 0x00c30c00, -+ .open_drain = true, - }; - --static struct ath79_spi_platform_data db120_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, -+static struct ar8327_platform_data db120_ar8327_data = { -+ .pad0_cfg = &db120_ar8327_pad0_cfg, -+ .port0_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, -+ .led_cfg = &db120_ar8327_led_cfg, - }; - --#ifdef CONFIG_PCI --static struct ath9k_platform_data db120_ath9k_data; -- --static int db120_pci_plat_dev_init(struct pci_dev *dev) --{ -- switch (PCI_SLOT(dev->devfn)) { -- case 0: -- dev->dev.platform_data = &db120_ath9k_data; -- break; -- } -- -- return 0; --} -- --static void __init db120_pci_init(u8 *eeprom) --{ -- memcpy(db120_ath9k_data.eeprom_data, eeprom, -- sizeof(db120_ath9k_data.eeprom_data)); -- -- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); -- ath79_register_pci(); --} --#else --static inline void db120_pci_init(void) {} --#endif /* CONFIG_PCI */ -+static struct mdio_board_info db120_mdio0_info[] = { -+ { -+ .bus_id = "ag71xx-mdio.0", -+ .phy_addr = 0, -+ .platform_data = &db120_ar8327_data, -+ }, -+}; - - static void __init db120_setup(void) - { - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - -+ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO); -+ ath79_register_m25p80(NULL); -+ - ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), - db120_leds_gpio); - ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, - ARRAY_SIZE(db120_gpio_keys), - db120_gpio_keys); -- ath79_register_spi(&db120_spi_data, db120_spi_info, -- ARRAY_SIZE(db120_spi_info)); - ath79_register_usb(); - ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); -- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); -+ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL); -+ -+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | -+ AR934X_ETH_CFG_SW_ONLY_MODE); -+ -+ ath79_register_mdio(1, 0x0); -+ ath79_register_mdio(0, 0x0); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0); -+ -+ mdiobus_register_board_info(db120_mdio0_info, -+ ARRAY_SIZE(db120_mdio0_info)); -+ -+ /* GMAC0 is connected to an AR8327 switch */ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = BIT(0); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ ath79_eth0_pll_data.pll_1000 = 0x06000000; -+ ath79_register_eth(0); -+ -+ /* GMAC1 is connected to the internal switch */ -+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0); -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; -+ ath79_eth1_data.speed = SPEED_1000; -+ ath79_eth1_data.duplex = DUPLEX_FULL; -+ -+ ath79_register_eth(1); -+ -+ ath79_register_nfc(); - } - - MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board", ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -43,9 +43,12 @@ config ATH79_MACH_AP81 - config ATH79_MACH_DB120 - bool "Atheros DB120 reference board" - select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help diff --git a/target/linux/ar71xx/patches-3.8/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-3.8/606-MIPS-ath79-pb44-fixes.patch deleted file mode 100644 index f9ec775..0000000 --- a/target/linux/ar71xx/patches-3.8/606-MIPS-ath79-pb44-fixes.patch +++ /dev/null @@ -1,153 +0,0 @@ ---- a/arch/mips/ath79/mach-pb44.c -+++ b/arch/mips/ath79/mach-pb44.c -@@ -8,23 +8,48 @@ - * by the Free Software Foundation. - */ - -+#include <linux/delay.h> - #include <linux/init.h> - #include <linux/platform_device.h> - #include <linux/i2c.h> - #include <linux/i2c-gpio.h> - #include <linux/i2c/pcf857x.h> -+#include <linux/i2c/pcf857x.h> -+#include <linux/spi/flash.h> -+#include <linux/spi/vsc7385.h> - --#include "machtypes.h" -+#include <asm/mach-ath79/ar71xx_regs.h> -+#include <asm/mach-ath79/ath79.h> -+ -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" - #include "dev-spi.h" - #include "dev-usb.h" -+#include "machtypes.h" - #include "pci.h" - - #define PB44_GPIO_I2C_SCL 0 - #define PB44_GPIO_I2C_SDA 1 - -+#define PB44_PCF8757_VSC7395_CS 0 -+#define PB44_PCF8757_STEREO_CS 1 -+#define PB44_PCF8757_SLIC_CS0 2 -+#define PB44_PCF8757_SLIC_TEST 3 -+#define PB44_PCF8757_SLIC_INT0 4 -+#define PB44_PCF8757_SLIC_INT1 5 -+#define PB44_PCF8757_SW_RESET 6 -+#define PB44_PCF8757_SW_JUMP 8 -+#define PB44_PCF8757_LED_JUMP1 9 -+#define PB44_PCF8757_LED_JUMP2 10 -+#define PB44_PCF8757_TP24 11 -+#define PB44_PCF8757_TP25 12 -+#define PB44_PCF8757_TP26 13 -+#define PB44_PCF8757_TP27 14 -+#define PB44_PCF8757_TP28 15 -+ - #define PB44_GPIO_EXP_BASE 16 -+#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS) - #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6) - #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8) - #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9) -@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data - .cs_line = 0, - }; - -+static struct ath79_spi_controller_data pb44_spi1_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_GPIO, -+ .cs_line = PB44_GPIO_VSC7395_CS, -+}; -+ -+static void pb44_vsc7395_reset(void) -+{ -+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY); -+ udelay(10); -+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY); -+ mdelay(50); -+} -+ -+static struct vsc7385_platform_data pb44_vsc7395_data = { -+ .reset = pb44_vsc7395_reset, -+ .ucode_name = "vsc7395_ucode_pb44.bin", -+ .mac_cfg = { -+ .tx_ipg = 6, -+ .bit2 = 1, -+ .clk_sel = 0, -+ }, -+}; -+ -+static const char *pb44_part_probes[] = { -+ "RedBoot", -+ NULL, -+}; -+ -+static struct flash_platform_data pb44_flash_data = { -+ .part_probes = pb44_part_probes, -+}; -+ - static struct spi_board_info pb44_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p64", -+ .platform_data = &pb44_flash_data, - .controller_data = &pb44_spi0_data, - }, -+ { -+ .bus_num = 0, -+ .chip_select = 1, -+ .max_speed_hz = 25000000, -+ .modalias = "spi-vsc7385", -+ .platform_data = &pb44_vsc7395_data, -+ .controller_data = &pb44_spi1_data, -+ } - }; - - static struct ath79_spi_platform_data pb44_spi_data = { - .bus_num = 0, -- .num_chipselect = 1, -+ .num_chipselect = 2, - }; - -+#define PB44_WAN_PHYMASK BIT(0) -+#define PB44_LAN_PHYMASK 0 -+#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK) -+ - static void __init pb44_init(void) - { - i2c_register_board_info(0, pb44_i2c_board_info, -@@ -122,6 +192,22 @@ static void __init pb44_init(void) - ARRAY_SIZE(pb44_spi_info)); - ath79_register_usb(); - ath79_register_pci(); -+ -+ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK; -+ -+ ath79_register_eth(0); -+ -+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth1_data.speed = SPEED_1000; -+ ath79_eth1_data.duplex = DUPLEX_FULL; -+ ath79_eth1_pll_data.pll_1000 = 0x110000; -+ -+ ath79_register_eth(1); - } - - MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -58,6 +58,7 @@ config ATH79_MACH_DB120 - config ATH79_MACH_PB44 - bool "Atheros PB44 reference board" - select SOC_AR71XX -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI diff --git a/target/linux/ar71xx/patches-3.8/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-3.8/607-MIPS-ath79-ubnt-xm-fixes.patch deleted file mode 100644 index cbbe20b..0000000 --- a/target/linux/ar71xx/patches-3.8/607-MIPS-ath79-ubnt-xm-fixes.patch +++ /dev/null @@ -1,109 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -70,9 +70,10 @@ config ATH79_MACH_PB44 - config ATH79_MACH_UBNT_XM - bool "Ubiquiti Networks XM (rev 1.0) board" - select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 - help - Say 'Y' here if you want your kernel to support the - Ubiquiti Networks XM (rev 1.0) board. ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -16,10 +16,11 @@ - - #include <asm/mach-ath79/irq.h> - --#include "machtypes.h" -+#include "dev-ap9x-pci.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" --#include "dev-spi.h" -+#include "dev-m25p80.h" -+#include "machtypes.h" - #include "pci.h" - - #define UBNT_XM_GPIO_LED_L1 0 -@@ -32,7 +33,7 @@ - #define UBNT_XM_KEYS_POLL_INTERVAL 20 - #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) - --#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000) -+#define UBNT_XM_EEPROM_ADDR 0x1fff1000 - - static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { - { -@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g - } - }; - --static struct ath79_spi_controller_data ubnt_xm_spi0_data = { -- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -- .cs_line = 0, --}; -- --static struct spi_board_info ubnt_xm_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l6405d", -- .controller_data = &ubnt_xm_spi0_data, -- } --}; -- --static struct ath79_spi_platform_data ubnt_xm_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -- --#ifdef CONFIG_PCI --static struct ath9k_platform_data ubnt_xm_eeprom_data; -- --static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev) --{ -- switch (PCI_SLOT(dev->devfn)) { -- case 0: -- dev->dev.platform_data = &ubnt_xm_eeprom_data; -- break; -- } -- -- return 0; --} -- --static void __init ubnt_xm_pci_init(void) --{ -- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, -- sizeof(ubnt_xm_eeprom_data.eeprom_data)); -- -- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init); -- ath79_register_pci(); --} --#else --static inline void ubnt_xm_pci_init(void) {} --#endif /* CONFIG_PCI */ -- - static void __init ubnt_xm_init(void) - { -+ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); -+ - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), - ubnt_xm_leds_gpio); - -@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void) - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); - -- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info, -- ARRAY_SIZE(ubnt_xm_spi_info)); -- -- ubnt_xm_pci_init(); -+ ath79_register_m25p80(NULL); -+ ap91_pci_init(eeprom, NULL); - } - - MIPS_MACHINE(ATH79_MACH_UBNT_XM, diff --git a/target/linux/ar71xx/patches-3.8/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.8/608-MIPS-ath79-ubnt-xm-add-more-boards.patch deleted file mode 100644 index 2e8fbdc..0000000 --- a/target/linux/ar71xx/patches-3.8/608-MIPS-ath79-ubnt-xm-add-more-boards.patch +++ /dev/null @@ -1,343 +0,0 @@ ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -12,16 +12,22 @@ - - #include <linux/init.h> - #include <linux/pci.h> -+#include <linux/platform_device.h> - #include <linux/ath9k_platform.h> -+#include <linux/etherdevice.h> -+#include <linux/ar8216_platform.h> - - #include <asm/mach-ath79/irq.h> -+#include <asm/mach-ath79/ar71xx_regs.h> - - #include "dev-ap9x-pci.h" -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" - #include "dev-m25p80.h" -+#include "dev-usb.h" -+#include "dev-wmac.h" - #include "machtypes.h" --#include "pci.h" - - #define UBNT_XM_GPIO_LED_L1 0 - #define UBNT_XM_GPIO_LED_L2 1 -@@ -37,19 +43,19 @@ - - static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { - { -- .name = "ubnt-xm:red:link1", -+ .name = "ubnt:red:link1", - .gpio = UBNT_XM_GPIO_LED_L1, - .active_low = 0, - }, { -- .name = "ubnt-xm:orange:link2", -+ .name = "ubnt:orange:link2", - .gpio = UBNT_XM_GPIO_LED_L2, - .active_low = 0, - }, { -- .name = "ubnt-xm:green:link3", -+ .name = "ubnt:green:link3", - .gpio = UBNT_XM_GPIO_LED_L3, - .active_low = 0, - }, { -- .name = "ubnt-xm:green:link4", -+ .name = "ubnt:green:link4", - .gpio = UBNT_XM_GPIO_LED_L4, - .active_low = 0, - }, -@@ -66,9 +72,13 @@ static struct gpio_keys_button ubnt_xm_g - } - }; - -+#define UBNT_M_WAN_PHYMASK BIT(4) -+ - static void __init ubnt_xm_init(void) - { - u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), - ubnt_xm_leds_gpio); -@@ -79,9 +89,242 @@ static void __init ubnt_xm_init(void) - - ath79_register_m25p80(NULL); - ap91_pci_init(eeprom, NULL); -+ -+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); -+ ath79_register_eth(0); - } - - MIPS_MACHINE(ATH79_MACH_UBNT_XM, - "UBNT-XM", - "Ubiquiti Networks XM (rev 1.0) board", - ubnt_xm_init); -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", -+ ubnt_xm_init); -+ -+static void __init ubnt_rocket_m_setup(void) -+{ -+ ubnt_xm_init(); -+ ath79_register_usb(); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", -+ ubnt_rocket_m_setup); -+ -+static void __init ubnt_nano_m_setup(void) -+{ -+ ubnt_xm_init(); -+ ath79_register_eth(1); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", -+ ubnt_nano_m_setup); -+ -+static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:green:globe", -+ .gpio = 0, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:green:power", -+ .gpio = 11, -+ .active_low = 1, -+ .default_state = LEDS_GPIO_DEFSTATE_ON, -+ } -+}; -+ -+static void __init ubnt_airrouter_setup(void) -+{ -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ath79_register_m25p80(NULL); -+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1); -+ -+ ath79_register_eth(1); -+ ath79_register_eth(0); -+ ath79_register_usb(); -+ -+ ap91_pci_init(ee, NULL); -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio), -+ ubnt_airrouter_leds_gpio); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter", -+ ubnt_airrouter_setup); -+ -+static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:orange:dome", -+ .gpio = 1, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:dome", -+ .gpio = 0, -+ .active_low = 0, -+ } -+}; -+ -+static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:orange:front", -+ .gpio = 1, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:front", -+ .gpio = 0, -+ .active_low = 0, -+ } -+}; -+ -+static void __init ubnt_unifi_setup(void) -+{ -+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); -+ ath79_register_eth(0); -+ -+ ap91_pci_init(ee, NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio), -+ ubnt_unifi_leds_gpio); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi", -+ ubnt_unifi_setup); -+ -+ -+#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4) -+#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) -+ -+static void __init ubnt_unifi_outdoor_setup(void) -+{ -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | -+ UBNT_UNIFIOD_2ND_PHYMASK)); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); -+ ath79_register_eth(0); -+ ath79_register_eth(1); -+ -+ ap91_pci_init(ee, NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio), -+ ubnt_unifi_outdoor_leds_gpio); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20", -+ "Ubiquiti UniFiAP Outdoor", -+ ubnt_unifi_outdoor_setup); -+ -+static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = { -+ { -+ .name = "ubnt:white:dome", -+ .gpio = 12, -+ }, { -+ .name = "ubnt:blue:dome", -+ .gpio = 13, -+ } -+}; -+ -+static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = { -+ { -+ .desc = "reset", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = 17, -+ .active_low = 1, -+ } -+}; -+ -+static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = { -+ .mode = AR8327_PAD_MAC_RGMII, -+ .txclk_delay_en = true, -+ .rxclk_delay_en = true, -+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, -+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -+}; -+ -+static struct ar8327_platform_data uap_pro_ar8327_data = { -+ .pad0_cfg = &uap_pro_ar8327_pad0_cfg, -+ .port0_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, -+}; -+ -+static struct mdio_board_info uap_pro_mdio0_info[] = { -+ { -+ .bus_id = "ag71xx-mdio.0", -+ .phy_addr = 0, -+ .platform_data = &uap_pro_ar8327_data, -+ }, -+}; -+ -+#define UAP_PRO_MAC0_OFFSET 0x0000 -+#define UAP_PRO_MAC1_OFFSET 0x0006 -+#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000 -+#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000 -+ -+static void __init ubnt_uap_pro_setup(void) -+{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds), -+ ubnt_uap_pro_gpio_leds); -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(uap_pro_gpio_keys), -+ uap_pro_gpio_keys); -+ -+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); -+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); -+ -+ ath79_register_mdio(0, 0x0); -+ mdiobus_register_board_info(uap_pro_mdio0_info, -+ ARRAY_SIZE(uap_pro_mdio0_info)); -+ -+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); -+ ath79_init_mac(ath79_eth0_data.mac_addr, -+ eeprom + UAP_PRO_MAC0_OFFSET, 0); -+ -+ /* GMAC0 is connected to an AR8327 switch */ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = BIT(0); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ ath79_eth0_pll_data.pll_1000 = 0x06000000; -+ ath79_register_eth(0); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", -+ ubnt_uap_pro_setup); -+ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -68,12 +68,16 @@ config ATH79_MACH_PB44 - Atheros PB44 reference board. - - config ATH79_MACH_UBNT_XM -- bool "Ubiquiti Networks XM (rev 1.0) board" -+ bool "Ubiquiti Networks XM/UniFi boards" - select SOC_AR724X -+ select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC - help - Say 'Y' here if you want your kernel to support the - Ubiquiti Networks XM (rev 1.0) board. ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -22,6 +22,13 @@ enum ath79_mach_type { - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ -+ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ -+ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ -+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ -+ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ -+ ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */ -+ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ -+ ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */ - ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ - }; - diff --git a/target/linux/ar71xx/patches-3.8/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.8/609-MIPS-ath79-ap136-fixes.patch deleted file mode 100644 index 4b530a7..0000000 --- a/target/linux/ar71xx/patches-3.8/609-MIPS-ath79-ap136-fixes.patch +++ /dev/null @@ -1,329 +0,0 @@ ---- a/arch/mips/ath79/mach-ap136.c -+++ b/arch/mips/ath79/mach-ap136.c -@@ -18,23 +18,29 @@ - * - */ - --#include <linux/pci.h> --#include <linux/ath9k_platform.h> -+#include <linux/platform_device.h> -+#include <linux/ar8216_platform.h> - --#include "machtypes.h" -+#include <asm/mach-ath79/ar71xx_regs.h> -+ -+#include "common.h" -+#include "pci.h" -+#include "dev-ap9x-pci.h" - #include "dev-gpio-buttons.h" -+#include "dev-eth.h" - #include "dev-leds-gpio.h" --#include "dev-spi.h" -+#include "dev-m25p80.h" -+#include "dev-nfc.h" - #include "dev-usb.h" - #include "dev-wmac.h" --#include "pci.h" -+#include "machtypes.h" - --#define AP136_GPIO_LED_STATUS_RED 14 --#define AP136_GPIO_LED_STATUS_GREEN 19 - #define AP136_GPIO_LED_USB 4 --#define AP136_GPIO_LED_WLAN_2G 13 - #define AP136_GPIO_LED_WLAN_5G 12 -+#define AP136_GPIO_LED_WLAN_2G 13 -+#define AP136_GPIO_LED_STATUS_RED 14 - #define AP136_GPIO_LED_WPS_RED 15 -+#define AP136_GPIO_LED_STATUS_GREEN 19 - #define AP136_GPIO_LED_WPS_GREEN 20 - - #define AP136_GPIO_BTN_WPS 16 -@@ -43,37 +49,39 @@ - #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ - #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) - --#define AP136_WMAC_CALDATA_OFFSET 0x1000 --#define AP136_PCIE_CALDATA_OFFSET 0x5000 -+#define AP136_MAC0_OFFSET 0 -+#define AP136_MAC1_OFFSET 6 -+#define AP136_WMAC_CALDATA_OFFSET 0x1000 -+#define AP136_PCIE_CALDATA_OFFSET 0x5000 - - static struct gpio_led ap136_leds_gpio[] __initdata = { - { -- .name = "qca:green:status", -+ .name = "ap136:green:status", - .gpio = AP136_GPIO_LED_STATUS_GREEN, - .active_low = 1, - }, - { -- .name = "qca:red:status", -+ .name = "ap136:red:status", - .gpio = AP136_GPIO_LED_STATUS_RED, - .active_low = 1, - }, - { -- .name = "qca:green:wps", -+ .name = "ap136:green:wps", - .gpio = AP136_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, - { -- .name = "qca:red:wps", -+ .name = "ap136:red:wps", - .gpio = AP136_GPIO_LED_WPS_RED, - .active_low = 1, - }, - { -- .name = "qca:red:wlan-2g", -+ .name = "ap136:red:wlan-2g", - .gpio = AP136_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { -- .name = "qca:red:usb", -+ .name = "ap136:red:usb", - .gpio = AP136_GPIO_LED_USB, - .active_low = 1, - } -@@ -98,65 +106,169 @@ static struct gpio_keys_button ap136_gpi - }, - }; - --static struct ath79_spi_controller_data ap136_spi0_data = { -- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -- .cs_line = 0, -+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg; -+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg; -+ -+static struct ar8327_platform_data ap136_ar8327_data = { -+ .pad0_cfg = &ap136_ar8327_pad0_cfg, -+ .pad6_cfg = &ap136_ar8327_pad6_cfg, -+ .port0_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, -+ .port6_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, - }; - --static struct spi_board_info ap136_spi_info[] = { -+static struct mdio_board_info ap136_mdio0_info[] = { - { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l6405d", -- .controller_data = &ap136_spi0_data, -- } -+ .bus_id = "ag71xx-mdio.0", -+ .phy_addr = 0, -+ .platform_data = &ap136_ar8327_data, -+ }, - }; - --static struct ath79_spi_platform_data ap136_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -+static void __init ap136_gmac_setup(void) -+{ -+ void __iomem *base; -+ u32 t; - --#ifdef CONFIG_PCI --static struct ath9k_platform_data ap136_ath9k_data; -+ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - --static int ap136_pci_plat_dev_init(struct pci_dev *dev) --{ -- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) -- dev->dev.platform_data = &ap136_ath9k_data; -+ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); - -- return 0; --} -+ t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); -+ t |= QCA955X_ETH_CFG_RGMII_EN; - --static void __init ap136_pci_init(u8 *eeprom) --{ -- memcpy(ap136_ath9k_data.eeprom_data, eeprom, -- sizeof(ap136_ath9k_data.eeprom_data)); -+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - -- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); -- ath79_register_pci(); -+ iounmap(base); - } --#else --static inline void ap136_pci_init(void) {} --#endif /* CONFIG_PCI */ - --static void __init ap136_setup(void) -+static void __init ap136_common_setup(void) - { - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - -+ ath79_register_m25p80(NULL); -+ - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), - ap136_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap136_gpio_keys), - ap136_gpio_keys); -- ath79_register_spi(&ap136_spi_data, ap136_spi_info, -- ARRAY_SIZE(ap136_spi_info)); -+ - ath79_register_usb(); -- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); -- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); -+ ath79_register_nfc(); -+ -+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL); -+ -+ ap136_gmac_setup(); -+ -+ ath79_register_mdio(0, 0x0); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0); -+ -+ mdiobus_register_board_info(ap136_mdio0_info, -+ ARRAY_SIZE(ap136_mdio0_info)); -+ -+ /* GMAC0 is connected to the RMGII interface */ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = BIT(0); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ -+ ath79_register_eth(0); -+ -+ /* GMAC1 is connected tot eh SGMII interface */ -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; -+ ath79_eth1_data.speed = SPEED_1000; -+ ath79_eth1_data.duplex = DUPLEX_FULL; -+ -+ ath79_register_eth(1); -+} -+ -+static void __init ap136_010_setup(void) -+{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */ -+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; -+ ap136_ar8327_pad0_cfg.txclk_delay_en = true; -+ ap136_ar8327_pad0_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; -+ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; -+ -+ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */ -+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; -+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; -+ -+ ath79_eth0_pll_data.pll_1000 = 0xa6000000; -+ ath79_eth1_pll_data.pll_1000 = 0x03000101; -+ -+ ap136_common_setup(); -+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); - } - - MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", - "Atheros AP136-010 reference board", -- ap136_setup); -+ ap136_010_setup); -+ -+static void __init ap136_020_common_setup(void) -+{ -+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */ -+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII; -+ ap136_ar8327_pad0_cfg.sgmii_delay_en = true; -+ -+ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */ -+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII; -+ ap136_ar8327_pad6_cfg.txclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; -+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; -+ -+ ath79_eth0_pll_data.pll_1000 = 0x56000000; -+ ath79_eth1_pll_data.pll_1000 = 0x03000101; -+ -+ ap136_common_setup(); -+} -+ -+static void __init ap136_020_setup(void) -+{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ap136_020_common_setup(); -+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); -+} -+ -+MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020", -+ "Atheros AP136-020 reference board", -+ ap136_020_setup); -+ -+/* -+ * AP135-020 is similar to AP136-020, any future AP135 specific init -+ * code can be added here. -+ */ -+static void __init ap135_020_setup(void) -+{ -+ ap136_leds_gpio[0].name = "ap135:green:status"; -+ ap136_leds_gpio[1].name = "ap135:red:status"; -+ ap136_leds_gpio[2].name = "ap135:green:wps"; -+ ap136_leds_gpio[3].name = "ap135:red:wps"; -+ ap136_leds_gpio[4].name = "ap135:red:wlan-2g"; -+ ap136_leds_gpio[5].name = "ap135:red:usb"; -+ -+ ap136_020_common_setup(); -+ ath79_register_pci(); -+} -+ -+MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020", -+ "Atheros AP135-020 reference board", -+ ap135_020_setup); ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -18,7 +18,9 @@ enum ath79_mach_type { - ATH79_MACH_GENERIC = 0, - ATH79_MACH_AP121, /* Atheros AP121 reference board */ - ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ -+ ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ -+ ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -16,16 +16,17 @@ config ATH79_MACH_AP121 - Atheros AP121 reference board. - - config ATH79_MACH_AP136 -- bool "Atheros AP136 reference board" -+ bool "Atheros AP136/AP135 reference board" - select SOC_QCA955X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_NFC - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help - Say 'Y' here if you want your kernel to support the -- Atheros AP136 reference board. -+ Atheros AP136 or AP135 reference boards. - - config ATH79_MACH_AP81 - bool "Atheros AP81 reference board" diff --git a/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch deleted file mode 100644 index b1ffda3..0000000 --- a/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch +++ /dev/null @@ -1,1034 +0,0 @@ -Index: linux-3.8.13/arch/mips/ath79/machtypes.h -=================================================================== ---- linux-3.8.13.orig/arch/mips/ath79/machtypes.h 2013-07-11 21:39:45.340919744 +0200 -+++ linux-3.8.13/arch/mips/ath79/machtypes.h 2013-07-11 22:02:50.208951883 +0200 -@@ -16,22 +16,125 @@ - - enum ath79_mach_type { - ATH79_MACH_GENERIC = 0, -+ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */ -+ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */ -+ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */ -+ ATH79_MACH_ALL0305, /* Allnet ALL0305 */ -+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */ -+ ATH79_MACH_AP113, /* Atheros AP113 reference board */ - ATH79_MACH_AP121, /* Atheros AP121 reference board */ - ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ -+ ATH79_MACH_AP132, /* Atheros AP132 reference board */ - ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ - ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ -+ ATH79_MACH_AP83, /* Atheros AP83 */ -+ ATH79_MACH_AP96, /* Atheros AP96 */ -+ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ -+ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ -+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ -+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ -+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ -+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ -+ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ -+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ -+ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */ -+ ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */ -+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ -+ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ -+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ -+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */ -+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */ -+ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */ -+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ -+ ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ -+ ATH79_MACH_MR600, /* OpenMesh MR600 */ -+ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ -+ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ -+ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ -+ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ -+ ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ -+ ATH79_MACH_OM2P, /* OpenMesh OM2P */ -+ ATH79_MACH_PB42, /* Atheros PB42 */ -+ ATH79_MACH_PB92, /* Atheros PB92 */ -+ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ -+ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ -+ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ -+ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ -+ ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */ -+ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ -+ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */ -+ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ -+ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */ -+ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */ -+ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */ -+ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */ -+ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */ -+ ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ -+ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ -+ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ -+ ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */ -+ ATH79_MACH_RW2458N, /* Redwave RW2458N */ -+ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ -+ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ -+ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */ -+ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */ -+ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */ -+ ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */ -+ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ -+ ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */ -+ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ -+ ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */ -+ ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/ -+ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ -+ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ -+ ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ -+ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ -+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ -+ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ -+ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */ -+ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */ -+ ATH79_MACH_TL_WR720N_V3, /* TP-LINK TL-WR720N v3 */ -+ ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ -+ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/ -+ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ -+ ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ -+ ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */ -+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ - ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ - ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ -- ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ -+ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ -+ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */ -+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ - ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ -+ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ -+ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */ - ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */ -- ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ -+ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ - ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */ - ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ -+ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */ -+ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */ -+ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */ -+ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */ -+ ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */ -+ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */ -+ ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */ -+ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */ -+ ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */ -+ ATH79_MACH_WP543, /* Compex WP543 */ -+ ATH79_MACH_WPE72, /* Compex WPE72 */ -+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */ -+ ATH79_MACH_WRT400N, /* Linksys WRT400N */ -+ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ -+ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ -+ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ -+ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ -+ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ -+ ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ - }; - - #endif /* _ATH79_MACHTYPE_H */ -Index: linux-3.8.13/arch/mips/ath79/Kconfig -=================================================================== ---- linux-3.8.13.orig/arch/mips/ath79/Kconfig 2013-07-11 21:39:45.340919744 +0200 -+++ linux-3.8.13/arch/mips/ath79/Kconfig 2013-07-11 21:57:12.076944035 +0200 -@@ -2,6 +2,61 @@ - - menu "Atheros AR71XX/AR724X/AR913X machine selection" - -+config ATH79_MACH_ALFA_AP96 -+ bool "ALFA Network AP96 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_SPI -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_HORNET_UB -+ bool "ALFA Network Hornet-UB board support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_ALFA_NX -+ bool "ALFA Network N2/N5 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_ALL0258N -+ bool "Allnet ALL0258N support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_ALL0315N -+ bool "Allnet ALL0315N support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_AP113 -+ bool "Atheros AP113 board support" -+ select SOC_AR724X -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_PB9X_PCI if PCI -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ select ATH79_DEV_ETH -+ - config ATH79_MACH_AP121 - bool "Atheros AP121 reference board" - select SOC_AR933X -@@ -11,62 +66,654 @@ - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP121 reference board. -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP121 reference board. -+ -+config ATH79_MACH_AP132 -+ bool "Atheros AP132 reference board" -+ select SOC_QCA955X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_SPI -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP132 reference boards. -+ -+config ATH79_MACH_AP136 -+ bool "Atheros AP136/AP135 reference board" -+ select SOC_QCA955X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_NFC -+ select ATH79_DEV_SPI -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP136 or AP135 reference boards. -+ -+config ATH79_MACH_AP81 -+ bool "Atheros AP81 reference board" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP81 reference board. -+ -+config ATH79_MACH_AP83 -+ bool "Atheros AP83 board support" -+ select SOC_AR913X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_AP96 -+ bool "Atheros AP96 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_DB120 -+ bool "Atheros DB120 reference board" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros DB120 reference board. -+ -+config ATH79_MACH_PB42 -+ bool "Atheros PB42 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_PB44 -+ bool "Atheros PB44 reference board" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_SPI -+ select ATH79_DEV_USB -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros PB44 reference board. -+ -+config ATH79_MACH_PB92 -+ bool "Atheros PB92 board support" -+ select SOC_AR724X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_PB9X_PCI if PCI -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_AW_NR580 -+ bool "AzureWave AW-NR580 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_WHR_HP_G300N -+ bool "Buffalo WHR-HP-G300N board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_WLAE_AG300N -+ bool "Buffalo WLAE-AG300N board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_WZR_HP_AG300H -+ bool "Buffalo WZR-HP-AG300H board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WZR_HP_G300NH -+ bool "Buffalo WZR-HP-G300NH board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select RTL8366_SMI -+ -+config ATH79_MACH_WZR_HP_G300NH2 -+ bool "Buffalo WZR-HP-G300NH2 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WZR_HP_G450H -+ bool "Buffalo WZR-HP-G450H board support" -+ select SOC_AR724X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WP543 -+ bool "Compex WP543/WPJ543 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select MYLOADER -+ -+config ATH79_MACH_WPE72 -+ bool "Compex WPE72/WPE72NX board support" -+ select SOC_AR724X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select MYLOADER -+ -+config ATH79_MACH_DIR_600_A1 -+ bool "D-Link DIR-600 A1/DIR-615 E4 support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_NVRAM -+ -+config ATH79_MACH_DIR_615_C1 -+ bool "D-Link DIR-615 rev. C1 support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_DIR_825_B1 -+ bool "D-Link DIR-825 rev. B1 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_DIR_825_C1 -+ bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_EW_DORIN -+ bool "embedded wireless Dorin Platform support" -+ select SOC_AR933X -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_ETH -+ help -+ Say 'Y' here if you want your kernel to support the -+ Dorin Platform from www.80211.de . -+ -+config ATH79_MACH_JA76PF -+ bool "jjPlus JA76PF board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_JWAP003 -+ bool "jjPlus JWAP003 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WRT160NL -+ bool "Linksys WRT160NL board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_WRT400N -+ bool "Linksys WRT400N board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_RB4XX -+ bool "MikroTik RouterBOARD 4xx series support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_RB750 -+ bool "MikroTik RouterBOARD 750 support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_USB -+ select ATH79_ROUTERBOOT -+ select RLE_DECOMPRESS -+ -+config ATH79_MACH_RB95X -+ bool "MikroTik RouterBOARD 95X support" -+ select SOC_AR934x -+ select ATH79_DEV_ETH -+ select ATH79_DEV_NFC -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_USB -+ select ATH79_ROUTERBOOT -+ select RLE_DECOMPRESS -+ -+config ATH79_MACH_RB2011 -+ bool "MikroTik RouterBOARD 2011 support" -+ select SOC_AR934x -+ select ATH79_DEV_ETH -+ select ATH79_DEV_NFC -+ select ATH79_DEV_WMAC -+ select ATH79_ROUTERBOOT -+ -+config ATH79_MACH_WNDAP360 -+ bool "NETGEAR WNDAP360 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WNDR3700 -+ bool "NETGEAR WNDR3700 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WNDR4300 -+ bool "NETGEAR WNDR4300 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WNR2000 -+ bool "NETGEAR WNR2000 board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WNR2000_V3 -+ bool "NETGEAR WNR2000 V3 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_OM2P -+ bool "OpenMesh OM2P board support" -+ select SOC_AR724X -+ select SOC_AR933X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MR600 -+ bool "OpenMesh MR600 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MZK_W04NU -+ bool "Planex MZK-W04NU board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC - --config ATH79_MACH_AP136 -- bool "Atheros AP136/AP135 reference board" -+config ATH79_MACH_MZK_W300NH -+ bool "Planex MZK-W300NH board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_RW2458N -+ bool "Redwave RW2458N board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_CAP4200AG -+ bool "Senao CAP4200AG support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_EAP7660D -+ bool "Senao EAP7660D support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_ARCHER_C7 -+ bool "TP-LINK Archer C7 board support" - select SOC_QCA955X -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_NFC - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP136 or AP135 reference boards. - --config ATH79_MACH_AP81 -- bool "Atheros AP81 reference board" -+config ATH79_MACH_TL_MR11U -+ bool "TP-LINK TL-MR11U/TL-MR3040 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_MR3020 -+ bool "TP-LINK TL-MR3020 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_MR3X20 -+ bool "TP-LINK TL-MR3220/3420 support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_TL_WA901ND -+ bool "TP-LINK TL-WA901ND/TL-WA7510N support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_TL_WA901ND_V2 -+ bool "TP-LINK TL-WA901ND v2 support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WDR3500 -+ bool "TP-LINK TL-WDR3500 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP81 reference board. - --config ATH79_MACH_DB120 -- bool "Atheros DB120 reference board" -+config ATH79_MACH_TL_WDR4300 -+ bool "TP-LINK TL-WDR3600/4300/4310 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 -- select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros DB120 reference board. - --config ATH79_MACH_PB44 -- bool "Atheros PB44 reference board" -+config ATH79_MACH_TL_WR703N -+ bool "TP-LINK TL-WR703N support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR720N_V3 -+ bool "TP-LINK TL-WR720N v3 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR741ND -+ bool "TP-LINK TL-WR741ND support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_TL_WR741ND_V4 -+ bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR841N_V1 -+ bool "TP-LINK TL-WR841N v1 support" - select SOC_AR71XX -+ select ATH79_DEV_DSA - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_TL_WR841N_V8 -+ bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR941ND -+ bool "TP-LINK TL-WR941ND support" -+ select SOC_AR913X -+ select ATH79_DEV_DSA -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR1041N_V2 -+ bool "TP-LINK TL-WR1041N v2 support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR1043ND -+ bool "TP-LINK TL-WR1043ND support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR2543N -+ bool "TP-LINK TL-WR2543N/ND support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_TEW_632BRP -+ bool "TRENDnet TEW-632BRP support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_TEW_673GRU -+ bool "TRENDnet TEW-673GRU support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_NVRAM -+ -+config ATH79_MACH_TEW_712BR -+ bool "TRENDnet TEW-712BR support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_UBNT -+ bool "Ubiquiti AR71xx based boards support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB -- help -- Say 'Y' here if you want your kernel to support the -- Atheros PB44 reference board. - - config ATH79_MACH_UBNT_XM - bool "Ubiquiti Networks XM/UniFi boards" -@@ -83,6 +730,34 @@ - Say 'Y' here if you want your kernel to support the - Ubiquiti Networks XM (rev 1.0) board. - -+config ATH79_MACH_ZCN_1523H -+ bool "Zcomax ZCN-1523H support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_NBG460N -+ bool "Zyxel NBG460N/550N/550NH board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_CARAMBOLA2 -+ bool "8devices Carambola2 board" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - endmenu - - config SOC_AR71XX -@@ -132,7 +807,10 @@ - config ATH79_DEV_ETH - def_bool n - --config PCI_AR724X -+config ATH79_DEV_DSA -+ def_bool n -+ -+config ATH79_DEV_ETH - def_bool n - - config ATH79_DEV_GPIO_BUTTONS -@@ -164,4 +842,7 @@ - config ATH79_ROUTERBOOT - def_bool n - -+config PCI_AR724X -+ def_bool n -+ - endif -Index: linux-3.8.13/arch/mips/ath79/Makefile -=================================================================== ---- linux-3.8.13.orig/arch/mips/ath79/Makefile 2013-07-11 21:39:45.288919744 +0200 -+++ linux-3.8.13/arch/mips/ath79/Makefile 2013-07-11 22:02:13.884951040 +0200 -@@ -38,9 +38,79 @@ - # - # Machines - # -+obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o -+obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o -+obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o -+obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o -+obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o - obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o -+obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o - obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o - obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o -+obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o -+obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o -+obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o -+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o -+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o - obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o -+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o -+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o -+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o -+obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o -+obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o -+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o -+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o -+obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o -+obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o -+obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o -+obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o -+obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o -+obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o -+obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o -+obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o - obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o -+obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o -+obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o -+obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o -+obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o -+obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o -+obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o -+obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o -+obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o -+obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o -+obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o -+obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o -+obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o -+obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o -+obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o -+obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o -+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o -+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o -+obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o -+obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o -+obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o -+obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o - obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o -+obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o -+obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o -+obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o -+obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o -+obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o -+obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o -+obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o -+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o -+obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o -+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o -+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o -+obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o -+obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o -Index: linux-3.8.13/arch/mips/ath79/prom.c -=================================================================== ---- linux-3.8.13.orig/arch/mips/ath79/prom.c 2013-07-11 21:39:45.212919741 +0200 -+++ linux-3.8.13/arch/mips/ath79/prom.c 2013-07-11 21:39:45.344919744 +0200 -@@ -180,6 +180,11 @@ - ath79_prom_append_cmdline("board", env); - } - } -+ -+ if (strstr(arcs_cmdline, "board=750Gr3") || -+ strstr(arcs_cmdline, "board=951G") || -+ strstr(arcs_cmdline, "board=2011L")) -+ ath79_prom_append_cmdline("console", "ttyS0,115200"); - } - - void __init prom_free_prom_memory(void) diff --git a/target/linux/ar71xx/patches-3.8/901-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-3.8/901-mdio_bitbang_ignore_ta_value.patch deleted file mode 100644 index 39584aa..0000000 --- a/target/linux/ar71xx/patches-3.8/901-mdio_bitbang_ignore_ta_value.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/net/phy/mdio-bitbang.c -+++ b/drivers/net/phy/mdio-bitbang.c -@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b - - ctrl->ops->set_mdio_dir(ctrl, 0); - -- /* check the turnaround bit: the PHY should be driving it to zero */ -- if (mdiobb_get_bit(ctrl) != 0) { -- /* PHY didn't drive TA low -- flush any bits it -- * may be trying to send. -- */ -- for (i = 0; i < 32; i++) -- mdiobb_get_bit(ctrl); -- -- return 0xffff; -- } -+ mdiobb_get_bit(ctrl); - - ret = mdiobb_get_num(ctrl, 16); - mdiobb_get_bit(ctrl); diff --git a/target/linux/ar71xx/patches-3.8/902-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-3.8/902-unaligned_access_hacks.patch deleted file mode 100644 index 714d2d6..0000000 --- a/target/linux/ar71xx/patches-3.8/902-unaligned_access_hacks.patch +++ /dev/null @@ -1,1017 +0,0 @@ ---- a/arch/mips/include/asm/checksum.h -+++ b/arch/mips/include/asm/checksum.h -@@ -104,26 +104,30 @@ static inline __sum16 ip_fast_csum(const - const unsigned int *stop = word + ihl; - unsigned int csum; - int carry; -+ unsigned int w; - -- csum = word[0]; -- csum += word[1]; -- carry = (csum < word[1]); -+ csum = net_hdr_word(word++); -+ -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- csum += word[2]; -- carry = (csum < word[2]); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- csum += word[3]; -- carry = (csum < word[3]); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- word += 4; - do { -- csum += *word; -- carry = (csum < *word); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; -- word++; - } while (word != stop); - - return csum_fold(csum); -@@ -192,69 +196,4 @@ static inline __sum16 ip_compute_csum(co - return csum_fold(csum_partial(buff, len, 0)); - } - --#define _HAVE_ARCH_IPV6_CSUM --static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, -- const struct in6_addr *daddr, -- __u32 len, unsigned short proto, -- __wsum sum) --{ -- __asm__( -- " .set push # csum_ipv6_magic\n" -- " .set noreorder \n" -- " .set noat \n" -- " addu %0, %5 # proto (long in network byte order)\n" -- " sltu $1, %0, %5 \n" -- " addu %0, $1 \n" -- -- " addu %0, %6 # csum\n" -- " sltu $1, %0, %6 \n" -- " lw %1, 0(%2) # four words source address\n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 4(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 8(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 12(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 0(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 4(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 8(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 12(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " addu %0, $1 # Add final carry\n" -- " .set pop" -- : "=r" (sum), "=r" (proto) -- : "r" (saddr), "r" (daddr), -- "0" (htonl(len)), "1" (htonl(proto)), "r" (sum)); -- -- return csum_fold(sum); --} -- - #endif /* _ASM_CHECKSUM_H */ ---- a/include/uapi/linux/ip.h -+++ b/include/uapi/linux/ip.h -@@ -102,7 +102,7 @@ struct iphdr { - __be32 saddr; - __be32 daddr; - /*The options start here. */ --}; -+} __attribute__((packed, aligned(2))); - - - struct ip_auth_hdr { ---- a/include/uapi/linux/ipv6.h -+++ b/include/uapi/linux/ipv6.h -@@ -123,7 +123,7 @@ struct ipv6hdr { - - struct in6_addr saddr; - struct in6_addr daddr; --}; -+} __attribute__((packed, aligned(2))); - - - /* index values for the variables in ipv6_devconf */ ---- a/include/uapi/linux/tcp.h -+++ b/include/uapi/linux/tcp.h -@@ -54,7 +54,7 @@ struct tcphdr { - __be16 window; - __sum16 check; - __be16 urg_ptr; --}; -+} __attribute__((packed, aligned(2))); - - /* - * The union cast uses a gcc extension to avoid aliasing problems -@@ -64,7 +64,7 @@ struct tcphdr { - union tcp_word_hdr { - struct tcphdr hdr; - __be32 words[5]; --}; -+} __attribute__((packed, aligned(2))); - - #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) - ---- a/include/uapi/linux/udp.h -+++ b/include/uapi/linux/udp.h -@@ -24,7 +24,7 @@ struct udphdr { - __be16 dest; - __be16 len; - __sum16 check; --}; -+} __attribute__((packed, aligned(2))); - - /* UDP socket options */ - #define UDP_CORK 1 /* Never send partially complete segments */ ---- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c -+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c -@@ -39,8 +39,8 @@ static bool ipv4_pkt_to_tuple(const stru - if (ap == NULL) - return false; - -- tuple->src.u3.ip = ap[0]; -- tuple->dst.u3.ip = ap[1]; -+ tuple->src.u3.ip = net_hdr_word(ap++); -+ tuple->dst.u3.ip = net_hdr_word(ap); - - return true; - } ---- a/include/uapi/linux/icmp.h -+++ b/include/uapi/linux/icmp.h -@@ -80,7 +80,7 @@ struct icmphdr { - __be16 mtu; - } frag; - } un; --}; -+} __attribute__((packed, aligned(2))); - - - /* ---- a/net/ipv4/tcp_input.c -+++ b/net/ipv4/tcp_input.c -@@ -3896,13 +3896,14 @@ static bool tcp_parse_aligned_timestamp( - { - const __be32 *ptr = (const __be32 *)(th + 1); - -- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) -- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { -+ if (net_hdr_word(ptr) == -+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { - tp->rx_opt.saw_tstamp = 1; - ++ptr; -- tp->rx_opt.rcv_tsval = ntohl(*ptr); -+ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr); - ++ptr; -- tp->rx_opt.rcv_tsecr = ntohl(*ptr); -+ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr); - return true; - } - return false; ---- a/include/uapi/linux/in6.h -+++ b/include/uapi/linux/in6.h -@@ -36,7 +36,7 @@ struct in6_addr { - #define s6_addr in6_u.u6_addr8 - #define s6_addr16 in6_u.u6_addr16 - #define s6_addr32 in6_u.u6_addr32 --}; -+} __attribute__((packed, aligned(2))); - - /* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553 - * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined ---- a/net/ipv6/af_inet6.c -+++ b/net/ipv6/af_inet6.c -@@ -61,6 +61,7 @@ - #endif - - #include <asm/uaccess.h> -+#include <asm/unaligned.h> - #include <linux/mroute6.h> - - MODULE_AUTHOR("Cast of dozens"); -@@ -688,7 +689,7 @@ bool ipv6_opt_accepted(const struct sock - if ((opt->hop && (np->rxopt.bits.hopopts || - np->rxopt.bits.ohopopts)) || - ((IPV6_FLOWINFO_MASK & -- *(__be32 *)skb_network_header(skb)) && -+ net_hdr_word(skb_network_header(skb))) && - np->rxopt.bits.rxflow) || - (opt->srcrt && (np->rxopt.bits.srcrt || - np->rxopt.bits.osrcrt)) || ---- a/net/ipv6/route.c -+++ b/net/ipv6/route.c -@@ -1013,7 +1013,7 @@ void ip6_route_input(struct sk_buff *skb - .flowi6_iif = skb->dev->ifindex, - .daddr = iph->daddr, - .saddr = iph->saddr, -- .flowlabel = (* (__be32 *) iph) & IPV6_FLOWINFO_MASK, -+ .flowlabel = net_hdr_word(iph) & IPV6_FLOWINFO_MASK, - .flowi6_mark = skb->mark, - .flowi6_proto = iph->nexthdr, - }; -@@ -1177,7 +1177,7 @@ void ip6_update_pmtu(struct sk_buff *skb - fl6.flowi6_flags = 0; - fl6.daddr = iph->daddr; - fl6.saddr = iph->saddr; -- fl6.flowlabel = (*(__be32 *) iph) & IPV6_FLOWINFO_MASK; -+ fl6.flowlabel = net_hdr_word(iph) & IPV6_FLOWINFO_MASK, - - dst = ip6_route_output(net, NULL, &fl6); - if (!dst->error) -@@ -1205,7 +1205,7 @@ void ip6_redirect(struct sk_buff *skb, s - fl6.flowi6_flags = 0; - fl6.daddr = iph->daddr; - fl6.saddr = iph->saddr; -- fl6.flowlabel = (*(__be32 *) iph) & IPV6_FLOWINFO_MASK; -+ fl6.flowlabel = net_hdr_word(iph) & IPV6_FLOWINFO_MASK, - - dst = ip6_route_output(net, NULL, &fl6); - if (!dst->error) ---- a/net/ipv6/tcp_ipv6.c -+++ b/net/ipv6/tcp_ipv6.c -@@ -64,6 +64,7 @@ - #include <net/secure_seq.h> - #include <net/tcp_memcontrol.h> - -+#include <asm/unaligned.h> - #include <asm/uaccess.h> - - #include <linux/proc_fs.h> -@@ -764,10 +765,10 @@ static void tcp_v6_send_response(struct - topt = (__be32 *)(t1 + 1); - - if (ts) { -- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); -- *topt++ = htonl(tcp_time_stamp); -- *topt++ = htonl(ts); -+ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++); -+ put_unaligned_be32(tcp_time_stamp, topt++); -+ put_unaligned_be32(ts, topt++); - } - - #ifdef CONFIG_TCP_MD5SIG ---- a/include/linux/ipv6.h -+++ b/include/linux/ipv6.h -@@ -4,6 +4,7 @@ - #include <uapi/linux/ipv6.h> - - #define ipv6_optlen(p) (((p)->hdrlen+1) << 3) -+ - /* - * This structure contains configuration options per IPv6 link. - */ -@@ -79,7 +80,7 @@ static inline struct ipv6hdr *ipipv6_hdr - - static inline __u8 ipv6_tclass(const struct ipv6hdr *iph) - { -- return (ntohl(*(__be32 *)iph) >> 20) & 0xff; -+ return (ntohl(net_hdr_word(iph)) >> 20) & 0xff; - } - - /* ---- a/net/ipv6/datagram.c -+++ b/net/ipv6/datagram.c -@@ -360,12 +360,12 @@ int ipv6_recv_error(struct sock *sk, str - *(struct in6_addr *)(nh + serr->addr_offset); - if (np->sndflow) - sin->sin6_flowinfo = -- (*(__be32 *)(nh + serr->addr_offset - 24) & -- IPV6_FLOWINFO_MASK); -+ net_hdr_word(nh + serr->addr_offset - 24) & -+ IPV6_FLOWINFO_MASK; - if (ipv6_addr_type(&sin->sin6_addr) & IPV6_ADDR_LINKLOCAL) - sin->sin6_scope_id = IP6CB(skb)->iif; - } else { -- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset), -+ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset), - &sin->sin6_addr); - } - } -@@ -493,9 +493,10 @@ int ip6_datagram_recv_ctl(struct sock *s - put_cmsg(msg, SOL_IPV6, IPV6_TCLASS, sizeof(tclass), &tclass); - } - -- if (np->rxopt.bits.rxflow && (*(__be32 *)nh & IPV6_FLOWINFO_MASK)) { -- __be32 flowinfo = *(__be32 *)nh & IPV6_FLOWINFO_MASK; -- put_cmsg(msg, SOL_IPV6, IPV6_FLOWINFO, sizeof(flowinfo), &flowinfo); -+ if (np->rxopt.bits.rxflow) { -+ __be32 flowinfo = net_hdr_word(nh) & IPV6_FLOWINFO_MASK; -+ if (flowinfo) -+ put_cmsg(msg, SOL_IPV6, IPV6_FLOWINFO, sizeof(flowinfo), &flowinfo); - } - - /* HbH is allowed only once */ -@@ -682,12 +683,12 @@ int ip6_datagram_send_ctl(struct net *ne - } - - if (fl6->flowlabel&IPV6_FLOWINFO_MASK) { -- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) { -+ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) { - err = -EINVAL; - goto exit_f; - } - } -- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg); -+ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg)); - break; - - case IPV6_2292HOPOPTS: ---- a/net/ipv6/ip6_gre.c -+++ b/net/ipv6/ip6_gre.c -@@ -430,7 +430,7 @@ static void ip6gre_err(struct sk_buff *s - - t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr, - flags & GRE_KEY ? -- *(((__be32 *)p) + (grehlen / 4) - 1) : 0, -+ net_hdr_word(((__be32 *)p) + (grehlen / 4) - 1) : 0, - p[1]); - if (t == NULL) - return; -@@ -522,11 +522,11 @@ static int ip6gre_rcv(struct sk_buff *sk - offset += 4; - } - if (flags&GRE_KEY) { -- key = *(__be32 *)(h + offset); -+ key = net_hdr_word(h + offset); - offset += 4; - } - if (flags&GRE_SEQ) { -- seqno = ntohl(*(__be32 *)(h + offset)); -+ seqno = ntohl(net_hdr_word(h + offset)); - offset += 4; - } - } -@@ -772,7 +772,7 @@ static netdev_tx_t ip6gre_xmit2(struct s - * Push down and install the IP header. - */ - ipv6h = ipv6_hdr(skb); -- *(__be32 *)ipv6h = fl6->flowlabel | htonl(0x60000000); -+ net_hdr_word(ipv6h) = fl6->flowlabel | htonl(0x60000000); - dsfield = INET_ECN_encapsulate(0, dsfield); - ipv6_change_dsfield(ipv6h, ~INET_ECN_MASK, dsfield); - ipv6h->hop_limit = tunnel->parms.hop_limit; -@@ -789,7 +789,7 @@ static netdev_tx_t ip6gre_xmit2(struct s - - if (tunnel->parms.o_flags&GRE_SEQ) { - ++tunnel->o_seqno; -- *ptr = htonl(tunnel->o_seqno); -+ net_hdr_word(ptr) = htonl(tunnel->o_seqno); - ptr--; - } - if (tunnel->parms.o_flags&GRE_KEY) { -@@ -897,9 +897,9 @@ static inline int ip6gre_xmit_ipv6(struc - - dsfield = ipv6_get_dsfield(ipv6h); - if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS) -- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK); -+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK; - if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL) -- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_FLOWLABEL_MASK); -+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_FLOWLABEL_MASK; - if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK) - fl6.flowi6_mark = skb->mark; - -@@ -1240,7 +1240,7 @@ static int ip6gre_header(struct sk_buff - struct ipv6hdr *ipv6h = (struct ipv6hdr *)skb_push(skb, t->hlen); - __be16 *p = (__be16 *)(ipv6h+1); - -- *(__be32 *)ipv6h = t->fl.u.ip6.flowlabel | htonl(0x60000000); -+ net_hdr_word(ipv6h) = t->fl.u.ip6.flowlabel | htonl(0x60000000); - ipv6h->hop_limit = t->parms.hop_limit; - ipv6h->nexthdr = NEXTHDR_GRE; - ipv6h->saddr = t->parms.laddr; ---- a/net/ipv6/ip6_output.c -+++ b/net/ipv6/ip6_output.c -@@ -216,7 +216,7 @@ int ip6_xmit(struct sock *sk, struct sk_ - if (hlimit < 0) - hlimit = ip6_dst_hoplimit(dst); - -- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | fl6->flowlabel; -+ net_hdr_word(hdr) = htonl(0x60000000 | (tclass << 20)) | fl6->flowlabel; - - hdr->payload_len = htons(seg_len); - hdr->nexthdr = proto; ---- a/net/ipv6/ip6_tunnel.c -+++ b/net/ipv6/ip6_tunnel.c -@@ -1136,9 +1136,9 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str - - dsfield = ipv6_get_dsfield(ipv6h); - if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS) -- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK); -+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK; - if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL) -- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_FLOWLABEL_MASK); -+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_FLOWLABEL_MASK; - if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK) - fl6.flowi6_mark = skb->mark; - ---- a/net/ipv6/exthdrs.c -+++ b/net/ipv6/exthdrs.c -@@ -578,7 +578,7 @@ static bool ipv6_hop_jumbo(struct sk_buf - goto drop; - } - -- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2)); -+ pkt_len = ntohl(net_hdr_word(nh + optoff + 2)); - if (pkt_len <= IPV6_MAXPLEN) { - IP6_INC_STATS_BH(net, ipv6_skb_idev(skb), - IPSTATS_MIB_INHDRERRORS); ---- a/include/linux/types.h -+++ b/include/linux/types.h -@@ -212,5 +212,11 @@ struct callback_head { - }; - #define rcu_head callback_head - -+struct net_hdr_word { -+ u32 words[1]; -+} __attribute__((packed, aligned(2))); -+ -+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0]) -+ - #endif /* __ASSEMBLY__ */ - #endif /* _LINUX_TYPES_H */ ---- a/net/ipv4/af_inet.c -+++ b/net/ipv4/af_inet.c -@@ -1396,8 +1396,8 @@ static struct sk_buff **inet_gro_receive - if (unlikely(ip_fast_csum((u8 *)iph, 5))) - goto out_unlock; - -- id = ntohl(*(__be32 *)&iph->id); -- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id ^ IP_DF)); -+ id = ntohl(net_hdr_word(&iph->id)); -+ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id ^ IP_DF)); - id >>= 16; - - for (p = *head; p; p = p->next) { ---- a/net/ipv4/route.c -+++ b/net/ipv4/route.c -@@ -465,7 +465,7 @@ static struct neighbour *ipv4_neigh_look - else if (skb) - pkey = &ip_hdr(skb)->daddr; - -- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey); -+ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey)); - if (n) - return n; - return neigh_create(&arp_tbl, pkey, dev); ---- a/net/ipv4/tcp_output.c -+++ b/net/ipv4/tcp_output.c -@@ -456,15 +456,17 @@ static void tcp_options_write(__be32 *pt - */ - if (unlikely(OPTION_MD5 & options)) { - if (unlikely(OPTION_COOKIE_EXTENSION & options)) { -- *ptr++ = htonl((TCPOPT_COOKIE << 24) | -- (TCPOLEN_COOKIE_BASE << 16) | -- (TCPOPT_MD5SIG << 8) | -- TCPOLEN_MD5SIG); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_COOKIE << 24) | -+ (TCPOLEN_COOKIE_BASE << 16) | -+ (TCPOPT_MD5SIG << 8) | -+ TCPOLEN_MD5SIG); - } else { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_MD5SIG << 8) | -- TCPOLEN_MD5SIG); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_MD5SIG << 8) | -+ TCPOLEN_MD5SIG); - } - options &= ~OPTION_COOKIE_EXTENSION; - /* overload cookie hash location */ -@@ -473,26 +475,28 @@ static void tcp_options_write(__be32 *pt - } - - if (unlikely(opts->mss)) { -- *ptr++ = htonl((TCPOPT_MSS << 24) | -- (TCPOLEN_MSS << 16) | -- opts->mss); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) | -+ opts->mss); - } - - if (likely(OPTION_TS & options)) { - if (unlikely(OPTION_SACK_ADVERTISE & options)) { -- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) | -- (TCPOLEN_SACK_PERM << 16) | -- (TCPOPT_TIMESTAMP << 8) | -- TCPOLEN_TIMESTAMP); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_SACK_PERM << 24) | -+ (TCPOLEN_SACK_PERM << 16) | -+ (TCPOPT_TIMESTAMP << 8) | -+ TCPOLEN_TIMESTAMP); - options &= ~OPTION_SACK_ADVERTISE; - } else { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_TIMESTAMP << 8) | -- TCPOLEN_TIMESTAMP); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | -+ TCPOLEN_TIMESTAMP); - } -- *ptr++ = htonl(opts->tsval); -- *ptr++ = htonl(opts->tsecr); -+ net_hdr_word(ptr++) = htonl(opts->tsval); -+ net_hdr_word(ptr++) = htonl(opts->tsecr); - } - - /* Specification requires after timestamp, so do it now. -@@ -512,19 +516,20 @@ static void tcp_options_write(__be32 *pt - __u8 *p = (__u8 *)ptr; - - /* 16-bit multiple */ -- *p++ = TCPOPT_COOKIE; -- *p++ = TCPOLEN_COOKIE_BASE + cookie_size; -- *p++ = *cookie_copy++; -- *p++ = *cookie_copy++; -+ net_hdr_word(p++) = TCPOPT_COOKIE; -+ net_hdr_word(p++) = TCPOLEN_COOKIE_BASE + cookie_size; -+ net_hdr_word(p++) = *cookie_copy++; -+ net_hdr_word(p++) = *cookie_copy++; - ptr++; - cookie_size -= 2; - } else { - /* 32-bit multiple */ -- *ptr++ = htonl(((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_COOKIE << 8) | -- TCPOLEN_COOKIE_BASE) + -- cookie_size); -+ net_hdr_word(ptr++) = -+ htonl(((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_COOKIE << 8) | -+ TCPOLEN_COOKIE_BASE) + -+ cookie_size); - } - - if (cookie_size > 0) { -@@ -534,17 +539,19 @@ static void tcp_options_write(__be32 *pt - } - - if (unlikely(OPTION_SACK_ADVERTISE & options)) { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_SACK_PERM << 8) | -- TCPOLEN_SACK_PERM); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_SACK_PERM << 8) | -+ TCPOLEN_SACK_PERM); - } - - if (unlikely(OPTION_WSCALE & options)) { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_WINDOW << 16) | -- (TCPOLEN_WINDOW << 8) | -- opts->ws); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_WINDOW << 16) | -+ (TCPOLEN_WINDOW << 8) | -+ opts->ws); - } - - if (unlikely(opts->num_sack_blocks)) { -@@ -552,16 +559,17 @@ static void tcp_options_write(__be32 *pt - tp->duplicate_sack : tp->selective_acks; - int this_sack; - -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_SACK << 8) | -- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_SACK << 8) | -+ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * - TCPOLEN_SACK_PERBLOCK))); - - for (this_sack = 0; this_sack < opts->num_sack_blocks; - ++this_sack) { -- *ptr++ = htonl(sp[this_sack].start_seq); -- *ptr++ = htonl(sp[this_sack].end_seq); -+ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq); -+ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq); - } - - tp->rx_opt.dsack = 0; -@@ -570,9 +578,10 @@ static void tcp_options_write(__be32 *pt - if (unlikely(OPTION_FAST_OPEN_COOKIE & options)) { - struct tcp_fastopen_cookie *foc = opts->fastopen_cookie; - -- *ptr++ = htonl((TCPOPT_EXP << 24) | -- ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) | -- TCPOPT_FASTOPEN_MAGIC); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_EXP << 24) | -+ ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) | -+ TCPOPT_FASTOPEN_MAGIC); - - memcpy(ptr, foc->val, foc->len); - if ((foc->len & 3) == 2) { ---- a/net/ipv4/igmp.c -+++ b/net/ipv4/igmp.c -@@ -470,7 +470,7 @@ static struct sk_buff *add_grec(struct s - if (!skb) - return NULL; - psrc = (__be32 *)skb_put(skb, sizeof(__be32)); -- *psrc = psf->sf_inaddr; -+ net_hdr_word(psrc) = psf->sf_inaddr; - scount++; stotal++; - if ((type == IGMPV3_ALLOW_NEW_SOURCES || - type == IGMPV3_BLOCK_OLD_SOURCES) && psf->sf_crcount) { ---- a/net/ipv4/ip_gre.c -+++ b/net/ipv4/ip_gre.c -@@ -518,7 +518,7 @@ static void ipgre_err(struct sk_buff *sk - return; - - if (flags & GRE_KEY) -- key = *(((__be32 *)p) + (grehlen / 4) - 1); -+ key = net_hdr_word(((__be32 *)p) + (grehlen / 4) - 1); - - switch (type) { - default: ---- a/include/uapi/linux/igmp.h -+++ b/include/uapi/linux/igmp.h -@@ -32,7 +32,7 @@ struct igmphdr { - __u8 code; /* For newer IGMP */ - __sum16 csum; - __be32 group; --}; -+} __attribute__((packed, aligned(2))); - - /* V3 group record types [grec_type] */ - #define IGMPV3_MODE_IS_INCLUDE 1 -@@ -48,7 +48,7 @@ struct igmpv3_grec { - __be16 grec_nsrcs; - __be32 grec_mca; - __be32 grec_src[0]; --}; -+} __attribute__((packed, aligned(2))); - - struct igmpv3_report { - __u8 type; -@@ -57,7 +57,7 @@ struct igmpv3_report { - __be16 resv2; - __be16 ngrec; - struct igmpv3_grec grec[0]; --}; -+} __attribute__((packed, aligned(2))); - - struct igmpv3_query { - __u8 type; -@@ -78,7 +78,7 @@ struct igmpv3_query { - __u8 qqic; - __be16 nsrcs; - __be32 srcs[0]; --}; -+} __attribute__((packed, aligned(2))); - - #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ - #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ ---- a/net/core/flow_dissector.c -+++ b/net/core/flow_dissector.c -@@ -137,7 +137,7 @@ ipv6: - nhoff += poff; - ports = skb_header_pointer(skb, nhoff, sizeof(_ports), &_ports); - if (ports) -- flow->ports = *ports; -+ flow->ports = net_hdr_word(ports); - } - - return true; ---- a/include/uapi/linux/icmpv6.h -+++ b/include/uapi/linux/icmpv6.h -@@ -76,7 +76,7 @@ struct icmp6hdr { - #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other - #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime - #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref --}; -+} __attribute__((packed, aligned(2))); - - - #define ICMPV6_ROUTER_PREF_LOW 0x3 ---- a/include/net/ndisc.h -+++ b/include/net/ndisc.h -@@ -76,7 +76,7 @@ struct ra_msg { - struct icmp6hdr icmph; - __be32 reachable_time; - __be32 retrans_timer; --}; -+} __attribute__((packed, aligned(2))); - - struct rd_msg { - struct icmp6hdr icmph; -@@ -142,10 +142,10 @@ static inline u32 ndisc_hashfn(const voi - { - const u32 *p32 = pkey; - -- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) + -- (p32[1] * hash_rnd[1]) + -- (p32[2] * hash_rnd[2]) + -- (p32[3] * hash_rnd[3])); -+ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) + -+ (net_hdr_word(&p32[1]) * hash_rnd[1]) + -+ (net_hdr_word(&p32[2]) * hash_rnd[2]) + -+ (net_hdr_word(&p32[3]) * hash_rnd[3])); - } - - static inline struct neighbour *__ipv6_neigh_lookup(struct neigh_table *tbl, struct net_device *dev, const void *pkey) -@@ -163,8 +163,10 @@ static inline struct neighbour *__ipv6_n - n = rcu_dereference_bh(n->next)) { - u32 *n32 = (u32 *) n->primary_key; - if (n->dev == dev && -- ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) | -- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0) { -+ ((n32[0] ^ net_hdr_word(&p32[0])) | -+ (n32[1] ^ net_hdr_word(&p32[1])) | -+ (n32[2] ^ net_hdr_word(&p32[2])) | -+ (n32[3] ^ net_hdr_word(&p32[3]))) == 0) { - if (!atomic_inc_not_zero(&n->refcnt)) - n = NULL; - break; ---- a/net/sched/cls_u32.c -+++ b/net/sched/cls_u32.c -@@ -142,7 +142,7 @@ next_knode: - data = skb_header_pointer(skb, toff, 4, &hdata); - if (!data) - goto out; -- if ((*data ^ key->val) & key->mask) { -+ if ((net_hdr_word(data) ^ key->val) & key->mask) { - n = n->next; - goto next_knode; - } -@@ -193,8 +193,8 @@ check_terminal: - &hdata); - if (!data) - goto out; -- sel = ht->divisor & u32_hash_fold(*data, &n->sel, -- n->fshift); -+ sel = ht->divisor & u32_hash_fold(net_hdr_word(data), -+ &n->sel, n->fshift); - } - if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT))) - goto next_ht; ---- a/net/ipv6/ip6_offload.c -+++ b/net/ipv6/ip6_offload.c -@@ -200,7 +200,7 @@ static struct sk_buff **ipv6_gro_receive - continue; - - iph2 = ipv6_hdr(p); -- first_word = *(__be32 *)iph ^ *(__be32 *)iph2 ; -+ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2); - - /* All fields must match except length and Traffic Class. */ - if (nlen != skb_network_header_len(p) || ---- a/include/net/addrconf.h -+++ b/include/net/addrconf.h -@@ -39,7 +39,7 @@ struct prefix_info { - __be32 reserved2; - - struct in6_addr prefix; --}; -+} __attribute__((packed, aligned(2))); - - - #include <linux/netdevice.h> ---- a/include/net/inet_ecn.h -+++ b/include/net/inet_ecn.h -@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct - { - if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph))) - return 0; -- *(__be32*)iph |= htonl(INET_ECN_CE << 20); -+ net_hdr_word(iph) |= htonl(INET_ECN_CE << 20); - return 1; - } - - static inline void IP6_ECN_clear(struct ipv6hdr *iph) - { -- *(__be32*)iph &= ~htonl(INET_ECN_MASK << 20); -+ net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20); - } - - static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner) ---- a/include/net/ipv6.h -+++ b/include/net/ipv6.h -@@ -107,7 +107,7 @@ struct frag_hdr { - __u8 reserved; - __be16 frag_off; - __be32 identification; --}; -+} __attribute__((packed, aligned(2))); - - #define IP6_MF 0x0001 - -@@ -386,6 +386,8 @@ static inline bool __ipv6_prefix_equal(c - unsigned int prefixlen) - { - unsigned int pdw, pbi; -+ /* Used for last <32-bit fraction of prefix */ -+ u32 pbia1, pbia2; - - /* check complete u32 in prefix */ - pdw = prefixlen >> 5; -@@ -394,7 +396,9 @@ static inline bool __ipv6_prefix_equal(c - - /* check incomplete u32 in prefix */ - pbi = prefixlen & 0x1f; -- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi)))) -+ pbia1 = net_hdr_word(&a1[pdw]); -+ pbia2 = net_hdr_word(&a2[pdw]); -+ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi)))) - return false; - - return true; -@@ -521,13 +525,13 @@ static inline void ipv6_addr_set_v4mappe - */ - static inline int __ipv6_addr_diff(const void *token1, const void *token2, int addrlen) - { -- const __be32 *a1 = token1, *a2 = token2; -+ const struct in6_addr *a1 = token1, *a2 = token2; - int i; - - addrlen >>= 2; - - for (i = 0; i < addrlen; i++) { -- __be32 xb = a1[i] ^ a2[i]; -+ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i]; - if (xb) - return i * 32 + 31 - __fls(ntohl(xb)); - } ---- a/include/net/secure_seq.h -+++ b/include/net/secure_seq.h -@@ -2,6 +2,7 @@ - #define _NET_SECURE_SEQ - - #include <linux/types.h> -+#include <linux/in6.h> - - extern __u32 secure_ip_id(__be32 daddr); - extern __u32 secure_ipv6_id(const __be32 daddr[4]); ---- a/include/uapi/linux/in.h -+++ b/include/uapi/linux/in.h -@@ -55,7 +55,7 @@ enum { - /* Internet address. */ - struct in_addr { - __be32 s_addr; --}; -+} __attribute__((packed, aligned(2))); - - #define IP_TOS 1 - #define IP_TTL 2 ---- a/net/core/secure_seq.c -+++ b/net/core/secure_seq.c -@@ -43,10 +43,11 @@ __u32 secure_tcpv6_sequence_number(const - u32 secret[MD5_MESSAGE_BYTES / 4]; - u32 hash[MD5_DIGEST_WORDS]; - u32 i; -+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; - - memcpy(hash, saddr, 16); - for (i = 0; i < 4; i++) -- secret[i] = net_secret[i] + (__force u32)daddr[i]; -+ secret[i] = net_secret[i] + (__force u32)daddr6->s6_addr32[i]; - secret[4] = net_secret[4] + - (((__force u16)sport << 16) + (__force u16)dport); - for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) -@@ -64,10 +65,11 @@ u32 secure_ipv6_port_ephemeral(const __b - u32 secret[MD5_MESSAGE_BYTES / 4]; - u32 hash[MD5_DIGEST_WORDS]; - u32 i; -+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; - - memcpy(hash, saddr, 16); - for (i = 0; i < 4; i++) -- secret[i] = net_secret[i] + (__force u32) daddr[i]; -+ secret[i] = net_secret[i] + (__force u32) daddr6->s6_addr32[i]; - secret[4] = net_secret[4] + (__force u32)dport; - for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) - secret[i] = net_secret[i]; -@@ -165,10 +167,11 @@ u64 secure_dccpv6_sequence_number(__be32 - u32 hash[MD5_DIGEST_WORDS]; - u64 seq; - u32 i; -+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; - - memcpy(hash, saddr, 16); - for (i = 0; i < 4; i++) -- secret[i] = net_secret[i] + daddr[i]; -+ secret[i] = net_secret[i] + daddr6->s6_addr32[i]; - secret[4] = net_secret[4] + - (((__force u16)sport << 16) + (__force u16)dport); - for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) ---- a/net/ipv6/ip6_fib.c -+++ b/net/ipv6/ip6_fib.c -@@ -144,7 +144,7 @@ static __inline__ __be32 addr_bit_set(co - * See include/asm-generic/bitops/le.h. - */ - return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) & -- addr[fn_bit >> 5]; -+ net_hdr_word(&addr[fn_bit >> 5]); - } - - static __inline__ struct fib6_node * node_alloc(void) ---- a/net/netfilter/nf_conntrack_proto_tcp.c -+++ b/net/netfilter/nf_conntrack_proto_tcp.c -@@ -452,7 +452,7 @@ static void tcp_sack(const struct sk_buf - - /* Fast path for timestamp-only option */ - if (length == TCPOLEN_TSTAMP_ALIGNED -- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24) -+ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24) - | (TCPOPT_NOP << 16) - | (TCPOPT_TIMESTAMP << 8) - | TCPOLEN_TIMESTAMP)) ---- a/net/netfilter/xt_LOG.c -+++ b/net/netfilter/xt_LOG.c -@@ -521,9 +521,9 @@ static void dump_ipv6_packet(struct sbuf - /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */ - sb_add(m, "LEN=%Zu TC=%u HOPLIMIT=%u FLOWLBL=%u ", - ntohs(ih->payload_len) + sizeof(struct ipv6hdr), -- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20, -+ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20, - ih->hop_limit, -- (ntohl(*(__be32 *)ih) & 0x000fffff)); -+ (ntohl(net_hdr_word(ih)) & 0x000fffff)); - - fragment = 0; - ptr = ip6hoff + sizeof(struct ipv6hdr); ---- a/net/xfrm/xfrm_input.c -+++ b/net/xfrm/xfrm_input.c -@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb, - if (!pskb_may_pull(skb, hlen)) - return -EINVAL; - -- *spi = *(__be32*)(skb_transport_header(skb) + offset); -- *seq = *(__be32*)(skb_transport_header(skb) + offset_seq); -+ *spi = net_hdr_word(skb_transport_header(skb) + offset); -+ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq); - return 0; - } - ---- a/include/uapi/linux/if_pppox.h -+++ b/include/uapi/linux/if_pppox.h -@@ -47,6 +47,7 @@ struct pppoe_addr { - */ - struct pptp_addr { - __be16 call_id; -+ __u16 pad; - struct in_addr sin_addr; - }; - |