target: ar71xx: add support for COMFAST CF-E316N v2 board

This adds full support (sans sysupgrading from vendor firmware) for the COMFAST
CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by
Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is
actively refusing to provide GPL'd sources for the OpenWrt version they ship
with the device, damn them).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 46852

4 files changed, 22 insertions, 10 deletions

diff --git a/target/linux/ar71xx/patches-4.1/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-4.1/509-MIPS-ath79-process-board-kernel-option.patch
index 13ff166..2366c40 100644
--- a/target/linux/ar71xx/patches-4.1/509-MIPS-ath79-process-board-kernel-option.patch
+++ b/target/linux/ar71xx/patches-4.1/509-MIPS-ath79-process-board-kernel-option.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/setup.c
 +++ b/arch/mips/ath79/setup.c
-@@ -237,6 +237,8 @@ void __init plat_time_init(void)
+@@ -236,6 +236,8 @@ void __init plat_time_init(void)
  	mips_hpt_frequency = cpu_clk_rate / 2;
  }
  
diff --git a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
index 02ebd1b..93f5195 100644
--- a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,24 +16,207 @@
+@@ -16,24 +16,208 @@
  
  enum ath79_mach_type {
  	ATH79_MACH_GENERIC = 0,
@@ -28,6 +28,7 @@
 +	ATH79_MACH_BHU_BXU2000N2_A1,	/* BHU BXU2000n-2 A1 */
 +	ATH79_MACH_CAP4200AG,		/* Senao CAP4200AG */
 +	ATH79_MACH_CARAMBOLA2,		/* 8devices Carambola2 */
++	ATH79_MACH_CF_E316N_V2,		/* COMFAST CF-E316N v2 */
 +	ATH79_MACH_CPE510,		/* TP-LINK CPE510 */
  	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
  	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
@@ -1437,7 +1438,7 @@
  
  config ATH79_MACH_UBNT_XM
  	bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1212,97 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1212,107 @@ config ATH79_MACH_UBNT_XM
  	  Say 'Y' here if you want your kernel to support the
  	  Ubiquiti Networks XM (rev 1.0) board.
  
@@ -1511,6 +1512,16 @@
 +	select ATH79_DEV_USB
 +	select ATH79_DEV_WMAC
 +
++config ATH79_MACH_CF_E316N_V2
++	bool "COMFAST CF-E316N v2 board"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
 +config ATH79_MACH_BHU_BXU2000N2_A
 +	bool "BHU BXU2000n-2 rev. A support"
 +	select SOC_AR934X
@@ -1535,7 +1546,7 @@
  endmenu
  
  config SOC_AR71XX
-@@ -134,7 +1354,10 @@ config ATH79_DEV_DSA
+@@ -134,7 +1364,10 @@ config ATH79_DEV_DSA
  config ATH79_DEV_ETH
  	def_bool n
  
@@ -1547,7 +1558,7 @@
  	def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -164,6 +1387,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,6 +1397,11 @@ config ATH79_PCI_ATH9K_FIXUP
  	def_bool n
  
  config ATH79_ROUTERBOOT
@@ -1561,7 +1572,7 @@
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,133 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)		+= route
+@@ -38,9 +38,134 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)		+= route
  #
  # Machines
  #
@@ -1583,6 +1594,7 @@
 +obj-$(CONFIG_ATH79_MACH_AW_NR580)	+= mach-aw-nr580.o
 +obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
 +obj-$(CONFIG_ATH79_MACH_CAP4200AG)	+= mach-cap4200ag.o
++obj-$(CONFIG_ATH79_MACH_CF_E316N_V2)	+= mach-cf-e316n-v2.o
 +obj-$(CONFIG_ATH79_MACH_CPE510)		+= mach-cpe510.o
  obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
 +obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP)	+= mach-dlan-pro-500-wp.o
diff --git a/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch
index 787db80..cc01cd6 100644
--- a/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch
+++ b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch
@@ -25,8 +25,8 @@
  obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
 +obj-$(CONFIG_ATH79_MACH_BSB)		+= mach-bsb.o
  obj-$(CONFIG_ATH79_MACH_CAP4200AG)	+= mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_CF_E316N_V2)	+= mach-cf-e316n-v2.o
  obj-$(CONFIG_ATH79_MACH_CPE510)		+= mach-cpe510.o
- obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
 @@ -39,6 +39,7 @@ enum ath79_mach_type {
@@ -36,4 +36,4 @@
 +	ATH79_MACH_BSB,			/* Smart Electronics Black Swift board */
  	ATH79_MACH_CAP4200AG,		/* Senao CAP4200AG */
  	ATH79_MACH_CARAMBOLA2,		/* 8devices Carambola2 */
- 	ATH79_MACH_CPE510,		/* TP-LINK CPE510 */
+ 	ATH79_MACH_CF_E316N_V2,		/* COMFAST CF-E316N v2 */
diff --git a/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch
index 036087a..1955bfa 100644
--- a/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch
+++ b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch
@@ -20,7 +20,7 @@
  	select SOC_AR933X
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -154,6 +154,7 @@ enum ath79_mach_type {
+@@ -155,6 +155,7 @@ enum ath79_mach_type {
  	ATH79_MACH_TL_WA901ND_V3,	/* TP-LINK TL-WA901ND v3 */
  	ATH79_MACH_TL_WDR3500,		/* TP-LINK TL-WDR3500 */
  	ATH79_MACH_TL_WDR4300,		/* TP-LINK TL-WDR4300 */
@@ -30,7 +30,7 @@
  	ATH79_MACH_TL_WR1043ND,		/* TP-LINK TL-WR1043ND */
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -130,6 +130,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA901ND)	+= m
+@@ -131,6 +131,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA901ND)	+= m
  obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)	+= mach-tl-wa901nd-v2.o
  obj-$(CONFIG_ATH79_MACH_TL_WDR3500)     += mach-tl-wdr3500.o
  obj-$(CONFIG_ATH79_MACH_TL_WDR4300)     += mach-tl-wdr4300.o