diff options
| author | Felix Fietkau <nbd@openwrt.org> | 2009-03-14 15:52:42 +0000 |
|---|---|---|
| committer | Felix Fietkau <nbd@openwrt.org> | 2009-03-14 15:52:42 +0000 |
| commit | 16defbb2bd9478f9e5384b9722f20a694e6bae41 (patch) | |
| tree | f52e202c30c7fca103b196ece1223e18446e4dfc /target/linux/ar7 | |
| parent | b4644aedce6526b5d07b336187c8e6417c7dd75e (diff) | |
| download | mtk-20170518-16defbb2bd9478f9e5384b9722f20a694e6bae41.zip mtk-20170518-16defbb2bd9478f9e5384b9722f20a694e6bae41.tar.gz mtk-20170518-16defbb2bd9478f9e5384b9722f20a694e6bae41.tar.bz2 | |
nuke obsolete kernel stuff
SVN-Revision: 14875
Diffstat (limited to 'target/linux/ar7')
33 files changed, 0 insertions, 2577 deletions
diff --git a/target/linux/ar7/config-2.6.23 b/target/linux/ar7/config-2.6.23 deleted file mode 100644 index 00c5170..0000000 --- a/target/linux/ar7/config-2.6.23 +++ /dev/null @@ -1,190 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_AR7=y -CONFIG_AR7_GPIO=y -CONFIG_AR7_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ATM_DRIVERS=y -CONFIG_BASE_SMALL=0 -CONFIG_BITREVERSE=y -CONFIG_BOOT_ELF32=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_BT is not set -CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2," -CONFIG_CPMAC=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_MII_100_FDX=y -# CONFIG_FIXED_MII_10_FDX is not set -CONFIG_FIXED_PHY=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HID_SUPPORT=n -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_CPU=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MIPS=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_AR7_PARTS=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PHRAM is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_START=0x10000000 -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEVICES_MULTIQUEUE is not set -CONFIG_NET_ACT_POLICE=y -CONFIG_NET_SCH_FIFO=y -# CONFIG_NF_CT_PROTO_GRE is not set -# CONFIG_NF_NAT_PROTO_GRE is not set -CONFIG_NO_EXCEPT_FILL=y -# CONFIG_NO_IOPORT is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PCI is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_RTC is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_WAIT_SCAN is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_KGDB=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USER_NS is not set -# CONFIG_VGASTATE is not set -CONFIG_VLYNQ=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar7/config-2.6.24 b/target/linux/ar7/config-2.6.24 deleted file mode 100644 index edc8b2b..0000000 --- a/target/linux/ar7/config-2.6.24 +++ /dev/null @@ -1,198 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_AR7=y -CONFIG_AR7_GPIO=y -CONFIG_AR7_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ATM_DRIVERS=y -CONFIG_BASE_SMALL=0 -# CONFIG_BCM47XX is not set -CONFIG_BITREVERSE=y -CONFIG_BOOT_ELF32=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_BT is not set -CONFIG_CEVT_R4K=y -CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2," -CONFIG_CPMAC=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CSRC_R4K=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HW_RANDOM=y -# CONFIG_I2C is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_CPU=y -CONFIG_KALLSYMS=y -# CONFIG_LEDS_ALIX is not set -CONFIG_LEDS_GPIO=y -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_MIPS=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_AR7_PARTS=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PHRAM is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_START=0x10000000 -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -CONFIG_NO_EXCEPT_FILL=y -# CONFIG_NO_IOPORT is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_RTC is not set -CONFIG_RTC_LIB=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_WAIT_SCAN is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SLAB is not set -CONFIG_SLABINFO=y -CONFIG_SLUB=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SSB_POSSIBLE=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_KGDB=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_TICK_ONESHOT=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USER_NS is not set -# CONFIG_VGASTATE is not set -CONFIG_VLYNQ=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar7/config-2.6.25 b/target/linux/ar7/config-2.6.25 deleted file mode 100644 index f43e31a..0000000 --- a/target/linux/ar7/config-2.6.25 +++ /dev/null @@ -1,214 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_AR7=y -CONFIG_AR7_GPIO=y -CONFIG_AR7_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ATM_DRIVERS=y -CONFIG_BASE_SMALL=0 -# CONFIG_BCM47XX is not set -CONFIG_BITREVERSE=y -CONFIG_BOOT_ELF32=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_BT is not set -CONFIG_CEVT_R4K=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2," -CONFIG_CPMAC=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CRYPTO_AEAD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CSRC_R4K=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_IDE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HW_RANDOM=y -# CONFIG_I2C is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_CPU=y -# CONFIG_ISDN is not set -CONFIG_KALLSYMS=y -# CONFIG_LEDS_ALIX is not set -CONFIG_LEDS_GPIO=y -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_LZO_COMPRESS is not set -# CONFIG_LZO_DECOMPRESS is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MDIO_BITBANG is not set -# CONFIG_MEMSTICK is not set -CONFIG_MIPS=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_AR7_PARTS=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PHRAM is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_START=0x10000000 -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -CONFIG_NO_EXCEPT_FILL=y -# CONFIG_NO_IOPORT is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_RTC is not set -CONFIG_RTC_LIB=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SLAB is not set -CONFIG_SLABINFO=y -CONFIG_SLUB=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SOUND is not set -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SSB_POSSIBLE=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_KGDB=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_TICK_ONESHOT=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_USB_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_DEV is not set -CONFIG_VLYNQ=y -# CONFIG_W1 is not set -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar7/patches-2.6.23/100-board_support.patch b/target/linux/ar7/patches-2.6.23/100-board_support.patch deleted file mode 100644 index 681a1a9..0000000 --- a/target/linux/ar7/patches-2.6.23/100-board_support.patch +++ /dev/null @@ -1,94 +0,0 @@ -Index: linux-2.6.23.17/arch/mips/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/arch/mips/Kconfig -+++ linux-2.6.23.17/arch/mips/Kconfig -@@ -15,6 +15,22 @@ choice - prompt "System type" - default SGI_IP22 - -+config AR7 -+ bool "Texas Instruments AR7" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select NO_EXCEPT_FILL -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_KGDB -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select GENERIC_GPIO -+ select GENERIC_HARDIRQS_NO__DO_IRQ -+ - config MACH_ALCHEMY - bool "Alchemy processor based machines" - -Index: linux-2.6.23.17/arch/mips/kernel/traps.c -=================================================================== ---- linux-2.6.23.17.orig/arch/mips/kernel/traps.c -+++ linux-2.6.23.17/arch/mips/kernel/traps.c -@@ -1075,10 +1075,23 @@ void *set_except_vector(int n, void *add - - exception_handlers[n] = handler; - if (n == 0 && cpu_has_divec) { -- *(volatile u32 *)(ebase + 0x200) = 0x08000000 | -- (0x03ffffff & (handler >> 2)); -- flush_icache_range(ebase + 0x200, ebase + 0x204); -- } -+ if ((handler ^ (ebase + 4)) & 0xfc000000) { -+ /* lui k0, 0x0000 */ -+ *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16); -+ /* ori k0, 0x0000 */ -+ *(u32 *)(ebase + 0x204) = -+ 0x375a0000 | (handler & 0xffff); -+ /* jr k0 */ -+ *(u32 *)(ebase + 0x208) = 0x03400008; -+ /* nop */ -+ *(u32 *)(ebase + 0x20C) = 0x00000000; -+ flush_icache_range(ebase + 0x200, ebase + 0x210); -+ } else { -+ *(volatile u32 *)(ebase + 0x200) = -+ 0x08000000 | (0x03ffffff & (handler >> 2)); -+ flush_icache_range(ebase + 0x200, ebase + 0x204); -+ } -+ } - return (void *)old_handler; - } - -Index: linux-2.6.23.17/arch/mips/Makefile -=================================================================== ---- linux-2.6.23.17.orig/arch/mips/Makefile -+++ linux-2.6.23.17/arch/mips/Makefile -@@ -161,6 +161,13 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/s - # - - # -+# Texas Instruments AR7 -+# -+core-$(CONFIG_AR7) += arch/mips/ar7/ -+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7 -+load-$(CONFIG_AR7) += 0xffffffff94100000 -+ -+# - # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. - # - core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ -Index: linux-2.6.23.17/include/asm-mips/page.h -=================================================================== ---- linux-2.6.23.17.orig/include/asm-mips/page.h -+++ linux-2.6.23.17/include/asm-mips/page.h -@@ -184,8 +184,10 @@ typedef struct { unsigned long pgprot; } - #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - --#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE) --#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET) -+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \ -+ PHYS_OFFSET) -+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \ -+ PHYS_OFFSET) - - #include <asm-generic/memory_model.h> - #include <asm-generic/page.h> diff --git a/target/linux/ar7/patches-2.6.23/110-flash.patch b/target/linux/ar7/patches-2.6.23/110-flash.patch deleted file mode 100644 index fa60108..0000000 --- a/target/linux/ar7/patches-2.6.23/110-flash.patch +++ /dev/null @@ -1,43 +0,0 @@ -Index: linux-2.6.23.17/drivers/mtd/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/Kconfig -+++ linux-2.6.23.17/drivers/mtd/Kconfig -@@ -160,6 +160,12 @@ config MTD_AFS_PARTS - for your particular device. It won't happen automatically. The - 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. - -+config MTD_AR7_PARTS -+ tristate "TI AR7 partitioning support" -+ depends on MTD_PARTITIONS -+ ---help--- -+ TI AR7 partitioning support -+ - comment "User Modules And Translation Layers" - - config MTD_CHAR -Index: linux-2.6.23.17/drivers/mtd/Makefile -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/Makefile -+++ linux-2.6.23.17/drivers/mtd/Makefile -@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o -+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o -Index: linux-2.6.23.17/drivers/mtd/maps/physmap.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/maps/physmap.c -+++ linux-2.6.23.17/drivers/mtd/maps/physmap.c -@@ -74,7 +74,8 @@ static int physmap_flash_remove(struct p - - static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; - #ifdef CONFIG_MTD_PARTITIONS --static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -+static const char *part_probe_types[] = {"cmdlinepart", "RedBoot", -+ "ar7part", NULL }; - #endif - - static int physmap_flash_probe(struct platform_device *dev) diff --git a/target/linux/ar7/patches-2.6.23/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.23/120-gpio_chrdev.patch deleted file mode 100644 index a61f3e0..0000000 --- a/target/linux/ar7/patches-2.6.23/120-gpio_chrdev.patch +++ /dev/null @@ -1,32 +0,0 @@ -Index: linux-2.6.23.17/drivers/char/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/char/Kconfig -+++ linux-2.6.23.17/drivers/char/Kconfig -@@ -928,6 +928,15 @@ config MWAVE - To compile this driver as a module, choose M here: the - module will be called mwave. - -+config AR7_GPIO -+ tristate "TI AR7 GPIO Support" -+ depends on AR7 -+ help -+ Give userspace access to the GPIO pins on the Texas Instruments AR7 -+ processors. -+ -+ If compiled as a module, it will be called ar7_gpio. -+ - config SCx200_GPIO - tristate "NatSemi SCx200 GPIO Support" - depends on SCx200 -Index: linux-2.6.23.17/drivers/char/Makefile -=================================================================== ---- linux-2.6.23.17.orig/drivers/char/Makefile -+++ linux-2.6.23.17/drivers/char/Makefile -@@ -89,6 +89,7 @@ obj-$(CONFIG_COBALT_LCD) += lcd.o - obj-$(CONFIG_PPDEV) += ppdev.o - obj-$(CONFIG_NWBUTTON) += nwbutton.o - obj-$(CONFIG_NWFLASH) += nwflash.o -+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o - obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o - obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o - obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o diff --git a/target/linux/ar7/patches-2.6.23/130-vlynq.patch b/target/linux/ar7/patches-2.6.23/130-vlynq.patch deleted file mode 100644 index 8f7e94b..0000000 --- a/target/linux/ar7/patches-2.6.23/130-vlynq.patch +++ /dev/null @@ -1,21 +0,0 @@ -Index: linux-2.6.23.17/drivers/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/Kconfig -+++ linux-2.6.23.17/drivers/Kconfig -@@ -93,4 +93,6 @@ source "drivers/kvm/Kconfig" - source "drivers/uio/Kconfig" - - source "drivers/lguest/Kconfig" -+ -+source "drivers/vlynq/Kconfig" - endmenu -Index: linux-2.6.23.17/drivers/Makefile -=================================================================== ---- linux-2.6.23.17.orig/drivers/Makefile -+++ linux-2.6.23.17/drivers/Makefile -@@ -89,4 +89,5 @@ obj-$(CONFIG_DMA_ENGINE) += dma/ - obj-$(CONFIG_HID) += hid/ - obj-$(CONFIG_PPC_PS3) += ps3/ - obj-$(CONFIG_OF) += of/ -+obj-$(CONFIG_VLYNQ) += vlynq/ - obj-$(CONFIG_GPIO_DEVICE) += gpio/ diff --git a/target/linux/ar7/patches-2.6.23/140-watchdog.patch b/target/linux/ar7/patches-2.6.23/140-watchdog.patch deleted file mode 100644 index 09a8ad5..0000000 --- a/target/linux/ar7/patches-2.6.23/140-watchdog.patch +++ /dev/null @@ -1,29 +0,0 @@ -Index: linux-2.6.23.17/drivers/char/watchdog/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/char/watchdog/Kconfig -+++ linux-2.6.23.17/drivers/char/watchdog/Kconfig -@@ -583,6 +583,12 @@ config SBC_EPX_C3_WATCHDOG - - # MIPS Architecture - -+config AR7_WDT -+ tristate "TI AR7 Watchdog Timer" -+ depends on WATCHDOG && AR7 -+ help -+ Hardware driver for the TI AR7 Watchdog Timer. -+ - config INDYDOG - tristate "Indy/I2 Hardware Watchdog" - depends on SGI_IP22 -Index: linux-2.6.23.17/drivers/char/watchdog/Makefile -=================================================================== ---- linux-2.6.23.17.orig/drivers/char/watchdog/Makefile -+++ linux-2.6.23.17/drivers/char/watchdog/Makefile -@@ -87,6 +87,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc - # M68KNOMMU Architecture - - # MIPS Architecture -+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_INDYDOG) += indydog.o - obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o - obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o diff --git a/target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch b/target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch deleted file mode 100644 index 0f13204..0000000 --- a/target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch +++ /dev/null @@ -1,32 +0,0 @@ -Index: linux-2.6.23.17/drivers/net/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/net/Kconfig -+++ linux-2.6.23.17/drivers/net/Kconfig -@@ -1965,6 +1965,15 @@ config SC92031 - To compile this driver as a module, choose M here: the module - will be called sc92031. This is recommended. - -+config CPMAC -+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" -+ depends on NET_ETHERNET && EXPERIMENTAL && AR7 -+ select PHYLIB -+ select FIXED_PHY -+ select FIXED_MII_100_FDX -+ help -+ TI AR7 CPMAC Ethernet support -+ - config NET_POCKET - bool "Pocket and portable adapters" - depends on PARPORT -Index: linux-2.6.23.17/drivers/net/Makefile -=================================================================== ---- linux-2.6.23.17.orig/drivers/net/Makefile -+++ linux-2.6.23.17/drivers/net/Makefile -@@ -156,6 +156,7 @@ obj-$(CONFIG_8139CP) += 8139cp.o - obj-$(CONFIG_8139TOO) += 8139too.o - obj-$(CONFIG_ZNET) += znet.o - obj-$(CONFIG_LAN_SAA9730) += saa9730.o -+obj-$(CONFIG_CPMAC) += cpmac.o - obj-$(CONFIG_DEPCA) += depca.o - obj-$(CONFIG_EWRK3) += ewrk3.o - obj-$(CONFIG_ATP) += atp.o diff --git a/target/linux/ar7/patches-2.6.23/210-phy_fixed.patch b/target/linux/ar7/patches-2.6.23/210-phy_fixed.patch deleted file mode 100644 index 2404078..0000000 --- a/target/linux/ar7/patches-2.6.23/210-phy_fixed.patch +++ /dev/null @@ -1,93 +0,0 @@ -Index: linux-2.6.23.17/drivers/net/phy/fixed.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/net/phy/fixed.c -+++ linux-2.6.23.17/drivers/net/phy/fixed.c -@@ -189,6 +189,19 @@ static struct phy_driver fixed_mdio_driv - .driver = { .owner = THIS_MODULE,}, - }; - -+static void fixed_mdio_release (struct device * dev) -+{ -+ struct phy_device *phydev = container_of(dev, struct phy_device, dev); -+ struct mii_bus *bus = phydev->bus; -+ struct fixed_info *fixed = bus->priv; -+ -+ kfree(phydev); -+ kfree(bus->dev); -+ kfree(bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+} -+ - /*----------------------------------------------------------------------------- - * This func is used to create all the necessary stuff, bind - * the fixed phy driver and register all it on the mdio_bus_type. -@@ -224,6 +237,12 @@ static int fixed_mdio_register_device(in - } - - fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL); -+ if (NULL == fixed->regs) { -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed); -+ return -ENOMEM; -+ } - fixed->regs_num = MII_REGS_NUM; - fixed->phy_status.speed = speed; - fixed->phy_status.duplex = duplex; -@@ -252,8 +271,11 @@ static int fixed_mdio_register_device(in - fixed->phydev = phydev; - - if(NULL == phydev) { -- err = -ENOMEM; -- goto device_create_fail; -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+ return -ENOMEM; - } - - phydev->irq = PHY_IGNORE_INTERRUPT; -@@ -265,8 +287,33 @@ static int fixed_mdio_register_device(in - else - snprintf(phydev->dev.bus_id, BUS_ID_SIZE, - "fixed@%d:%d", speed, duplex); -+ - phydev->bus = new_bus; - -+#if 1 -+ phydev->dev.driver = &fixed_mdio_driver.driver; -+ phydev->dev.release = fixed_mdio_release; -+ -+ err = phydev->dev.driver->probe(&phydev->dev); -+ if(err < 0) { -+ printk(KERN_ERR "Phy %s: problems with fixed driver\n", -+ phydev->dev.bus_id); -+ kfree(phydev); -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+ return err; -+ } -+ -+ err = device_register(&phydev->dev); -+ if(err) { -+ printk(KERN_ERR "Phy %s failed to register\n", -+ phydev->dev.bus_id); -+ } -+ -+ return 0; -+#else - err = device_register(&phydev->dev); - if(err) { - printk(KERN_ERR "Phy %s failed to register\n", -@@ -303,6 +350,7 @@ device_create_fail: - kfree(fixed); - - return err; -+#endif - } - #endif - diff --git a/target/linux/ar7/patches-2.6.23/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.23/500-serial_kludge.patch deleted file mode 100644 index f695d2a..0000000 --- a/target/linux/ar7/patches-2.6.23/500-serial_kludge.patch +++ /dev/null @@ -1,57 +0,0 @@ -Index: linux-2.6.23.17/drivers/serial/8250.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/serial/8250.c -+++ linux-2.6.23.17/drivers/serial/8250.c -@@ -267,6 +267,13 @@ static const struct serial8250_config ua - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, -+ [PORT_AR7] = { -+ .name = "TI-AR7", -+ .fifo_size = 16, -+ .tx_loadsz = 16, -+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, -+ .flags = UART_CAP_FIFO | UART_CAP_AFE, -+ }, - }; - - #if defined (CONFIG_SERIAL_8250_AU1X00) -@@ -2455,7 +2462,11 @@ static void serial8250_console_putchar(s - { - struct uart_8250_port *up = (struct uart_8250_port *)port; - -+#ifdef CONFIG_AR7 -+ wait_for_xmitr(up, BOTH_EMPTY); -+#else - wait_for_xmitr(up, UART_LSR_THRE); -+#endif - serial_out(up, UART_TX, ch); - } - -Index: linux-2.6.23.17/include/linux/serial_core.h -=================================================================== ---- linux-2.6.23.17.orig/include/linux/serial_core.h -+++ linux-2.6.23.17/include/linux/serial_core.h -@@ -40,6 +40,7 @@ - #define PORT_NS16550A 14 - #define PORT_XSCALE 15 - #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ -+#define PORT_AR7 16 - #define PORT_MAX_8250 16 /* max port ID */ - - /* -Index: linux-2.6.23.17/include/linux/serialP.h -=================================================================== ---- linux-2.6.23.17.orig/include/linux/serialP.h -+++ linux-2.6.23.17/include/linux/serialP.h -@@ -135,6 +135,10 @@ struct rs_multiport_struct { - * the interrupt line _up_ instead of down, so if we register the IRQ - * while the UART is in that state, we die in an IRQ storm. */ - #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) -+#elif defined(CONFIG_AR7) -+/* This is how it is set up by bootloader... */ -+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1 \ -+ | UART_MCR_RTS | UART_MCR_DTR) - #else - #define ALPHA_KLUDGE_MCR 0 - #endif diff --git a/target/linux/ar7/patches-2.6.24/100-board_support.patch b/target/linux/ar7/patches-2.6.24/100-board_support.patch deleted file mode 100644 index 744371e..0000000 --- a/target/linux/ar7/patches-2.6.24/100-board_support.patch +++ /dev/null @@ -1,94 +0,0 @@ -Index: linux-2.6.24.7/arch/mips/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/arch/mips/Kconfig -+++ linux-2.6.24.7/arch/mips/Kconfig -@@ -16,6 +16,24 @@ choice - prompt "System type" - default SGI_IP22 - -+config AR7 -+ bool "Texas Instruments AR7" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select CEVT_R4K -+ select CSRC_R4K -+ select IRQ_CPU -+ select NO_EXCEPT_FILL -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_KGDB -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select GENERIC_GPIO -+ select GENERIC_HARDIRQS_NO__DO_IRQ -+ - config MACH_ALCHEMY - bool "Alchemy processor based machines" - -Index: linux-2.6.24.7/arch/mips/kernel/traps.c -=================================================================== ---- linux-2.6.24.7.orig/arch/mips/kernel/traps.c -+++ linux-2.6.24.7/arch/mips/kernel/traps.c -@@ -1093,9 +1093,22 @@ void *set_except_vector(int n, void *add - - exception_handlers[n] = handler; - if (n == 0 && cpu_has_divec) { -- *(u32 *)(ebase + 0x200) = 0x08000000 | -- (0x03ffffff & (handler >> 2)); -- flush_icache_range(ebase + 0x200, ebase + 0x204); -+ if ((handler ^ (ebase + 4)) & 0xfc000000) { -+ /* lui k0, 0x0000 */ -+ *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16); -+ /* ori k0, 0x0000 */ -+ *(u32 *)(ebase + 0x204) = -+ 0x375a0000 | (handler & 0xffff); -+ /* jr k0 */ -+ *(u32 *)(ebase + 0x208) = 0x03400008; -+ /* nop */ -+ *(u32 *)(ebase + 0x20C) = 0x00000000; -+ flush_icache_range(ebase + 0x200, ebase + 0x210); -+ } else { -+ *(u32 *)(ebase + 0x200) = -+ 0x08000000 | (0x03ffffff & (handler >> 2)); -+ flush_icache_range(ebase + 0x200, ebase + 0x204); -+ } - } - return (void *)old_handler; - } -Index: linux-2.6.24.7/arch/mips/Makefile -=================================================================== ---- linux-2.6.24.7.orig/arch/mips/Makefile -+++ linux-2.6.24.7/arch/mips/Makefile -@@ -159,6 +159,13 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/s - # - - # -+# Texas Instruments AR7 -+# -+core-$(CONFIG_AR7) += arch/mips/ar7/ -+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7 -+load-$(CONFIG_AR7) += 0xffffffff94100000 -+ -+# - # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. - # - core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ -Index: linux-2.6.24.7/include/asm-mips/page.h -=================================================================== ---- linux-2.6.24.7.orig/include/asm-mips/page.h -+++ linux-2.6.24.7/include/asm-mips/page.h -@@ -184,8 +184,10 @@ typedef struct { unsigned long pgprot; } - #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - --#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE) --#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET) -+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \ -+ PHYS_OFFSET) -+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \ -+ PHYS_OFFSET) - - #include <asm-generic/memory_model.h> - #include <asm-generic/page.h> diff --git a/target/linux/ar7/patches-2.6.24/110-flash.patch b/target/linux/ar7/patches-2.6.24/110-flash.patch deleted file mode 100644 index 7a31368..0000000 --- a/target/linux/ar7/patches-2.6.24/110-flash.patch +++ /dev/null @@ -1,43 +0,0 @@ -Index: linux-2.6.24.7/drivers/mtd/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/Kconfig -+++ linux-2.6.24.7/drivers/mtd/Kconfig -@@ -160,6 +160,12 @@ config MTD_AFS_PARTS - for your particular device. It won't happen automatically. The - 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. - -+config MTD_AR7_PARTS -+ tristate "TI AR7 partitioning support" -+ depends on MTD_PARTITIONS -+ ---help--- -+ TI AR7 partitioning support -+ - comment "User Modules And Translation Layers" - - config MTD_CHAR -Index: linux-2.6.24.7/drivers/mtd/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/Makefile -+++ linux-2.6.24.7/drivers/mtd/Makefile -@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o -+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o -Index: linux-2.6.24.7/drivers/mtd/maps/physmap.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/mtd/maps/physmap.c -+++ linux-2.6.24.7/drivers/mtd/maps/physmap.c -@@ -74,7 +74,8 @@ static int physmap_flash_remove(struct p - - static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; - #ifdef CONFIG_MTD_PARTITIONS --static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -+static const char *part_probe_types[] = {"cmdlinepart", "RedBoot", -+ "ar7part", NULL }; - #endif - - static int physmap_flash_probe(struct platform_device *dev) diff --git a/target/linux/ar7/patches-2.6.24/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.24/120-gpio_chrdev.patch deleted file mode 100644 index 27db92a..0000000 --- a/target/linux/ar7/patches-2.6.24/120-gpio_chrdev.patch +++ /dev/null @@ -1,32 +0,0 @@ -Index: linux-2.6.24.7/drivers/char/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/char/Kconfig -+++ linux-2.6.24.7/drivers/char/Kconfig -@@ -904,6 +904,15 @@ config MWAVE - To compile this driver as a module, choose M here: the - module will be called mwave. - -+config AR7_GPIO -+ tristate "TI AR7 GPIO Support" -+ depends on AR7 -+ help -+ Give userspace access to the GPIO pins on the Texas Instruments AR7 -+ processors. -+ -+ If compiled as a module, it will be called ar7_gpio. -+ - config SCx200_GPIO - tristate "NatSemi SCx200 GPIO Support" - depends on SCx200 -Index: linux-2.6.24.7/drivers/char/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/char/Makefile -+++ linux-2.6.24.7/drivers/char/Makefile -@@ -89,6 +89,7 @@ obj-$(CONFIG_COBALT_LCD) += lcd.o - obj-$(CONFIG_PPDEV) += ppdev.o - obj-$(CONFIG_NWBUTTON) += nwbutton.o - obj-$(CONFIG_NWFLASH) += nwflash.o -+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o - obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o - obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o - obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o diff --git a/target/linux/ar7/patches-2.6.24/130-vlynq.patch b/target/linux/ar7/patches-2.6.24/130-vlynq.patch deleted file mode 100644 index f4154ab..0000000 --- a/target/linux/ar7/patches-2.6.24/130-vlynq.patch +++ /dev/null @@ -1,24 +0,0 @@ -Index: linux-2.6.24.7/drivers/Kconfig -=================================================================== ---- linux-2.6.24.7.orig/drivers/Kconfig -+++ linux-2.6.24.7/drivers/Kconfig -@@ -96,5 +96,7 @@ source "drivers/kvm/Kconfig" - - source "drivers/uio/Kconfig" - -+source "drivers/vlynq/Kconfig" -+ - source "drivers/virtio/Kconfig" - endmenu -Index: linux-2.6.24.7/drivers/Makefile -=================================================================== ---- linux-2.6.24.7.orig/drivers/Makefile -+++ linux-2.6.24.7/drivers/Makefile -@@ -89,6 +89,7 @@ obj-$(CONFIG_DCA) += dca/ - obj-$(CONFIG_HID) += hid/ - obj-$(CONFIG_PPC_PS3) += ps3/ - obj-$(CONFIG_OF) += of/ -+obj-$(CONFIG_VLYNQ) += vlynq/ - obj-$(CONFIG_SSB) += ssb/ - obj-$(CONFIG_VIRTIO) += virtio/ - obj-$(CONFIG_GPIO_DEVICE) += gpio/ diff --git a/target/linux/ar7/patches-2.6.24/140-cpmac_fix.patch b/target/linux/ar7/patches-2.6.24/140-cpmac_fix.patch deleted file mode 100644 index 7658932..0000000 --- a/target/linux/ar7/patches-2.6.24/140-cpmac_fix.patch +++ /dev/null @@ -1,268 +0,0 @@ -Index: linux-2.6.24.7/drivers/net/cpmac.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/net/cpmac.c -+++ linux-2.6.24.7/drivers/net/cpmac.c -@@ -38,6 +38,7 @@ - #include <linux/platform_device.h> - #include <linux/dma-mapping.h> - #include <asm/gpio.h> -+#include <asm/atomic.h> - - MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>"); - MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)"); -@@ -207,6 +208,7 @@ struct cpmac_priv { - struct work_struct reset_work; - struct platform_device *pdev; - struct napi_struct napi; -+ atomic_t reset_pending; - }; - - static irqreturn_t cpmac_irq(int, void *); -@@ -455,6 +457,9 @@ static int cpmac_start_xmit(struct sk_bu - struct cpmac_desc *desc; - struct cpmac_priv *priv = netdev_priv(dev); - -+ if (unlikely(atomic_read(&priv->reset_pending))) -+ return NETDEV_TX_BUSY; -+ - if (unlikely(skb_padto(skb, ETH_ZLEN))) - return NETDEV_TX_OK; - -@@ -634,14 +639,14 @@ static void cpmac_clear_tx(struct net_de - priv->desc_ring[i].dataflags = 0; - if (priv->desc_ring[i].skb) { - dev_kfree_skb_any(priv->desc_ring[i].skb); -- if (netif_subqueue_stopped(dev, i)) -- netif_wake_subqueue(dev, i); -+ priv->desc_ring[i].skb = NULL; - } - } - } - - static void cpmac_hw_error(struct work_struct *work) - { -+ int i; - struct cpmac_priv *priv = - container_of(work, struct cpmac_priv, reset_work); - -@@ -650,8 +655,47 @@ static void cpmac_hw_error(struct work_s - spin_unlock(&priv->rx_lock); - cpmac_clear_tx(priv->dev); - cpmac_hw_start(priv->dev); -- napi_enable(&priv->napi); -- netif_start_queue(priv->dev); -+ barrier(); -+ atomic_dec(&priv->reset_pending); -+ -+ for (i = 0; i < CPMAC_QUEUES; i++) { -+ netif_wake_subqueue(priv->dev, i); -+ } -+ netif_wake_queue(priv->dev); -+ cpmac_write(priv->regs, CPMAC_MAC_INT_ENABLE, 3); -+} -+ -+static void cpmac_check_status(struct net_device *dev) -+{ -+ struct cpmac_priv *priv = netdev_priv(dev); -+ -+ u32 macstatus = cpmac_read(priv->regs, CPMAC_MAC_STATUS); -+ int rx_channel = (macstatus >> 8) & 7; -+ int rx_code = (macstatus >> 12) & 15; -+ int tx_channel = (macstatus >> 16) & 7; -+ int tx_code = (macstatus >> 20) & 15; -+ -+ if (rx_code || tx_code) { -+ if (netif_msg_drv(priv) && net_ratelimit()) { -+ /* Can't find any documentation on what these error codes actually are. -+ * So just log them and hope.. -+ */ -+ if (rx_code) -+ printk(KERN_WARNING "%s: host error %d on rx channel %d (macstatus %08x), resetting\n", -+ dev->name, rx_code, rx_channel, macstatus); -+ if (tx_code) -+ printk(KERN_WARNING "%s: host error %d on tx channel %d (macstatus %08x), resetting\n", -+ dev->name, tx_code, tx_channel, macstatus); -+ } -+ -+ netif_stop_queue(dev); -+ cpmac_hw_stop(dev); -+ if (schedule_work(&priv->reset_work)) -+ atomic_inc(&priv->reset_pending); -+ if (unlikely(netif_msg_hw(priv))) -+ cpmac_dump_regs(dev); -+ } -+ cpmac_write(priv->regs, CPMAC_MAC_INT_CLEAR, 0xff); - } - - static irqreturn_t cpmac_irq(int irq, void *dev_id) -@@ -661,9 +705,6 @@ static irqreturn_t cpmac_irq(int irq, vo - int queue; - u32 status; - -- if (!dev) -- return IRQ_NONE; -- - priv = netdev_priv(dev); - - status = cpmac_read(priv->regs, CPMAC_MAC_INT_VECTOR); -@@ -685,49 +726,33 @@ static irqreturn_t cpmac_irq(int irq, vo - - cpmac_write(priv->regs, CPMAC_MAC_EOI_VECTOR, 0); - -- if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) { -- if (netif_msg_drv(priv) && net_ratelimit()) -- printk(KERN_ERR "%s: hw error, resetting...\n", -- dev->name); -- netif_stop_queue(dev); -- napi_disable(&priv->napi); -- cpmac_hw_stop(dev); -- schedule_work(&priv->reset_work); -- if (unlikely(netif_msg_hw(priv))) -- cpmac_dump_regs(dev); -- } -+ if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) -+ cpmac_check_status(dev); - - return IRQ_HANDLED; - } - - static void cpmac_tx_timeout(struct net_device *dev) - { -- struct cpmac_priv *priv = netdev_priv(dev); - int i; -+ struct cpmac_priv *priv = netdev_priv(dev); - - spin_lock(&priv->lock); - dev->stats.tx_errors++; - spin_unlock(&priv->lock); - if (netif_msg_tx_err(priv) && net_ratelimit()) - printk(KERN_WARNING "%s: transmit timeout\n", dev->name); -- /* -- * FIXME: waking up random queue is not the best thing to -- * do... on the other hand why we got here at all? -- */ --#ifdef CONFIG_NETDEVICES_MULTIQUEUE -- for (i = 0; i < CPMAC_QUEUES; i++) -- if (priv->desc_ring[i].skb) { -- priv->desc_ring[i].dataflags = 0; -- dev_kfree_skb_any(priv->desc_ring[i].skb); -- netif_wake_subqueue(dev, i); -- break; -- } --#else -- priv->desc_ring[0].dataflags = 0; -- if (priv->desc_ring[0].skb) -- dev_kfree_skb_any(priv->desc_ring[0].skb); -- netif_wake_queue(dev); --#endif -+ -+ atomic_inc(&priv->reset_pending); -+ barrier(); -+ cpmac_clear_tx(dev); -+ barrier(); -+ atomic_dec(&priv->reset_pending); -+ -+ netif_wake_queue(priv->dev); -+ for (i = 0; i < CPMAC_QUEUES; i++) { -+ netif_wake_subqueue(dev, i); -+ } - } - - static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -@@ -848,15 +873,6 @@ static void cpmac_adjust_link(struct net - spin_unlock(&priv->lock); - } - --static int cpmac_link_update(struct net_device *dev, -- struct fixed_phy_status *status) --{ -- status->link = 1; -- status->speed = 100; -- status->duplex = 1; -- return 0; --} -- - static int cpmac_open(struct net_device *dev) - { - int i, size, res; -@@ -923,6 +939,7 @@ static int cpmac_open(struct net_device - goto fail_irq; - } - -+ atomic_set(&priv->reset_pending, 0); - INIT_WORK(&priv->reset_work, cpmac_hw_error); - cpmac_hw_start(dev); - -@@ -999,11 +1016,11 @@ static int external_switch; - static int __devinit cpmac_probe(struct platform_device *pdev) - { - int rc, phy_id, i; -+ int mdio_bus_id = cpmac_mii.id; - struct resource *mem; - struct cpmac_priv *priv; - struct net_device *dev; - struct plat_cpmac_data *pdata; -- struct fixed_info *fixed_phy; - DECLARE_MAC_BUF(mac); - - pdata = pdev->dev.platform_data; -@@ -1017,9 +1034,23 @@ static int __devinit cpmac_probe(struct - } - - if (phy_id == PHY_MAX_ADDR) { -- if (external_switch || dumb_switch) -+ if (external_switch || dumb_switch) { -+ struct fixed_phy_status status = {}; -+ -+ mdio_bus_id = 0; -+ -+ /* -+ * FIXME: this should be in the platform code! -+ * Since there is not platform code at all (that is, -+ * no mainline users of that driver), place it here -+ * for now. -+ */ - phy_id = 0; -- else { -+ status.link = 1; -+ status.duplex = 1; -+ status.speed = 100; -+ fixed_phy_add(PHY_POLL, phy_id, &status); -+ } else { - printk(KERN_ERR "cpmac: no PHY present\n"); - return -ENODEV; - } -@@ -1063,32 +1094,8 @@ static int __devinit cpmac_probe(struct - priv->msg_enable = netif_msg_init(debug_level, 0xff); - memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr)); - -- if (phy_id == 31) { -- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, cpmac_mii.id, -- phy_id); -- } else { -- /* Let's try to get a free fixed phy... */ -- for (i = 0; i < MAX_PHY_AMNT; i++) { -- fixed_phy = fixed_mdio_get_phydev(i); -- if (!fixed_phy) -- continue; -- if (!fixed_phy->phydev->attached_dev) { -- strncpy(priv->phy_name, -- fixed_phy->phydev->dev.bus_id, -- BUS_ID_SIZE); -- fixed_mdio_set_link_update(fixed_phy->phydev, -- &cpmac_link_update); -- goto phy_found; -- } -- } -- if (netif_msg_drv(priv)) -- printk(KERN_ERR "%s: Could not find fixed PHY\n", -- dev->name); -- rc = -ENODEV; -- goto fail; -- } -+ snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); - --phy_found: - priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0, - PHY_INTERFACE_MODE_MII); - if (IS_ERR(priv->phy)) { diff --git a/target/linux/ar7/patches-2.6.24/150-cpmac_up_and_running.diff b/target/linux/ar7/patches-2.6.24/150-cpmac_up_and_running.diff deleted file mode 100644 index c2fb478..0000000 --- a/target/linux/ar7/patches-2.6.24/150-cpmac_up_and_running.diff +++ /dev/null @@ -1,95 +0,0 @@ -From 0daaa095cefd9d7091a7ccce2ff89f1ff4feae7a Mon Sep 17 00:00:00 2001 -From: Anton Vorontsov <avorontsov@ru.mvista.com> -Date: Wed, 5 Mar 2008 14:52:26 +0300 -Subject: [PATCH] AR7/cpmac: convert to new fixed phy infrastructure, now for real - -This patch converts platform code to register fixed phys early. -cpmac driver modified to blindly accept fixed phy id (that is equal -to platform device id). - -Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> ---- - arch/mips/ar7/platform.c | 17 +++++++++++++++++ - drivers/net/cpmac.c | 19 +++---------------- - 2 files changed, 20 insertions(+), 16 deletions(-) - -Index: linux-2.6.24.7/arch/mips/ar7/platform.c -=================================================================== ---- linux-2.6.24.7.orig/arch/mips/ar7/platform.c -+++ linux-2.6.24.7/arch/mips/ar7/platform.c -@@ -33,6 +33,8 @@ - #include <linux/vlynq.h> - #include <linux/leds.h> - #include <linux/string.h> -+#include <linux/phy.h> -+#include <linux/phy_fixed.h> - - #include <asm/addrspace.h> - #include <asm/ar7/ar7.h> -@@ -205,6 +207,13 @@ static struct physmap_flash_data physmap - .width = 2, - }; - -+/* lets assume this is suitable for both high and low cpmacs links */ -+static struct fixed_phy_status fixed_phy_status __initdata = { -+ .link = 1, -+ .speed = 100, -+ .duplex = 1, -+}; -+ - static struct plat_cpmac_data cpmac_low_data = { - .reset_bit = 17, - .power_bit = 20, -@@ -506,6 +515,10 @@ static int __init ar7_register_devices(v - } - - if (ar7_has_high_cpmac()) { -+ res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status); -+ if (res && res != -ENODEV) -+ return res; -+ - cpmac_get_mac(1, cpmac_high_data.dev_addr); - res = platform_device_register(&cpmac_high); - if (res) -@@ -514,6 +527,10 @@ static int __init ar7_register_devices(v - cpmac_low_data.phy_mask = 0xffffffff; - } - -+ res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status); -+ if (res && res != -ENODEV) -+ return res; -+ - cpmac_get_mac(0, cpmac_low_data.dev_addr); - res = platform_device_register(&cpmac_low); - if (res) -Index: linux-2.6.24.7/drivers/net/cpmac.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/net/cpmac.c -+++ linux-2.6.24.7/drivers/net/cpmac.c -@@ -1035,23 +1035,10 @@ static int __devinit cpmac_probe(struct - - if (phy_id == PHY_MAX_ADDR) { - if (external_switch || dumb_switch) { -- struct fixed_phy_status status = {}; -- -- mdio_bus_id = 0; -- -- /* -- * FIXME: this should be in the platform code! -- * Since there is not platform code at all (that is, -- * no mainline users of that driver), place it here -- * for now. -- */ -- phy_id = 0; -- status.link = 1; -- status.duplex = 1; -- status.speed = 100; -- fixed_phy_add(PHY_POLL, phy_id, &status); -+ mdio_bus_id = 0; /* fixed phys bus */ -+ phy_id = pdev->id; - } else { -- printk(KERN_ERR "cpmac: no PHY present\n"); -+ dev_err(&pdev->dev, "no PHY present\n"); - return -ENODEV; - } - } diff --git a/target/linux/ar7/patches-2.6.24/160-cpmac-rx-ring-use-eoq.diff b/target/linux/ar7/patches-2.6.24/160-cpmac-rx-ring-use-eoq.diff deleted file mode 100644 index 2fb71cd..0000000 --- a/target/linux/ar7/patches-2.6.24/160-cpmac-rx-ring-use-eoq.diff +++ /dev/null @@ -1,180 +0,0 @@ -Index: linux-2.6.24.7/drivers/net/cpmac.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/net/cpmac.c -+++ linux-2.6.24.7/drivers/net/cpmac.c -@@ -187,6 +187,7 @@ struct cpmac_desc { - #define CPMAC_EOQ 0x1000 - struct sk_buff *skb; - struct cpmac_desc *next; -+ struct cpmac_desc *prev; - dma_addr_t mapping; - dma_addr_t data_mapping; - }; -@@ -242,6 +243,16 @@ static void cpmac_dump_desc(struct net_d - printk("\n"); - } - -+static void cpmac_dump_all_desc(struct net_device *dev) -+{ -+ struct cpmac_priv *priv = netdev_priv(dev); -+ struct cpmac_desc *dump = priv->rx_head; -+ do { -+ cpmac_dump_desc(dev, dump); -+ dump = dump->next; -+ } while (dump != priv->rx_head); -+} -+ - static void cpmac_dump_skb(struct net_device *dev, struct sk_buff *skb) - { - int i; -@@ -413,21 +424,40 @@ static struct sk_buff *cpmac_rx_one(stru - static int cpmac_poll(struct napi_struct *napi, int budget) - { - struct sk_buff *skb; -- struct cpmac_desc *desc; -- int received = 0; -+ struct cpmac_desc *desc, *restart; - struct cpmac_priv *priv = container_of(napi, struct cpmac_priv, napi); -+ int received = 0, processed = 0; - - spin_lock(&priv->rx_lock); - if (unlikely(!priv->rx_head)) { - if (netif_msg_rx_err(priv) && net_ratelimit()) - printk(KERN_WARNING "%s: rx: polling, but no queue\n", - priv->dev->name); -+ spin_unlock(&priv->rx_lock); - netif_rx_complete(priv->dev, napi); - return 0; - } - - desc = priv->rx_head; -+ restart = NULL; - while (((desc->dataflags & CPMAC_OWN) == 0) && (received < budget)) { -+ processed++; -+ -+ if ((desc->dataflags & CPMAC_EOQ) != 0) { -+ /* The last update to eoq->hw_next didn't happen soon enough, and the -+ * receiver stopped here. Remember this descriptor so we can restart -+ * the receiver after freeing some space. -+ */ -+ if (unlikely(restart)) { -+ if (netif_msg_rx_err(priv)) -+ printk(KERN_ERR "%s: poll found a duplicate EOQ: %p and %p\n", -+ priv->dev->name, restart, desc); -+ goto fatal_error; -+ } -+ -+ restart = desc->next; -+ } -+ - skb = cpmac_rx_one(priv, desc); - if (likely(skb)) { - netif_receive_skb(skb); -@@ -436,19 +466,81 @@ static int cpmac_poll(struct napi_struct - desc = desc->next; - } - -+ if (desc != priv->rx_head) { -+ /* We freed some buffers, but not the whole ring, add what we did free to the rx list */ -+ desc->prev->hw_next = (u32)0; -+ priv->rx_head->prev->hw_next = priv->rx_head->mapping; -+ } -+ -+ /* Optimization: If we did not actually process an EOQ (perhaps because of -+ * quota limits), check to see if the tail of the queue has EOQ set. We -+ * should immediately restart in that case so that the receiver can restart -+ * and run in parallel with more packet processing. This lets us handle slightly -+ * larger bursts before running out of ring space (assuming dev->weight < ring_size) -+ */ -+ if (!restart && -+ (priv->rx_head->prev->dataflags & (CPMAC_OWN|CPMAC_EOQ)) == CPMAC_EOQ && -+ (priv->rx_head->dataflags & CPMAC_OWN) != 0) { -+ /* reset EOQ so the poll loop (above) doesn't try to restart this when it -+ * eventually gets to this descriptor. -+ */ -+ priv->rx_head->prev->dataflags &= ~CPMAC_EOQ; -+ restart = priv->rx_head; -+ } -+ -+ if (restart) { -+ priv->dev->stats.rx_errors++; -+ priv->dev->stats.rx_fifo_errors++; -+ if (netif_msg_rx_err(priv) && net_ratelimit()) -+ printk(KERN_WARNING "%s: rx dma ring overrun\n", priv->dev->name); -+ -+ if (unlikely((restart->dataflags & CPMAC_OWN) == 0)) { -+ if (netif_msg_drv(priv)) -+ printk(KERN_ERR "%s: cpmac_poll is trying to restart rx from a descriptor that's not free: %p\n", -+ priv->dev->name, restart); -+ goto fatal_error; -+ } -+ -+ cpmac_write(priv->regs, CPMAC_RX_PTR(0), restart->mapping); -+ } -+ - priv->rx_head = desc; - spin_unlock(&priv->rx_lock); - if (unlikely(netif_msg_rx_status(priv))) - printk(KERN_DEBUG "%s: poll processed %d packets\n", - priv->dev->name, received); -- if (desc->dataflags & CPMAC_OWN) { -+ if (processed == 0) { -+ /* we ran out of packets to read, revert to interrupt-driven mode */ - netif_rx_complete(priv->dev, napi); -- cpmac_write(priv->regs, CPMAC_RX_PTR(0), (u32)desc->mapping); - cpmac_write(priv->regs, CPMAC_RX_INT_ENABLE, 1); - return 0; - } - - return 1; -+ -+fatal_error: -+ /* Something went horribly wrong. Reset hardware to try to recover rather than wedging. */ -+ -+ if (netif_msg_drv(priv)) { -+ printk(KERN_ERR "%s: cpmac_poll is confused. Resetting hardware\n", priv->dev->name); -+ cpmac_dump_all_desc(priv->dev); -+ printk(KERN_DEBUG "%s: RX_PTR(0)=0x%08x RX_ACK(0)=0x%08x\n", -+ priv->dev->name, -+ cpmac_read(priv->regs, CPMAC_RX_PTR(0)), -+ cpmac_read(priv->regs, CPMAC_RX_ACK(0))); -+ } -+ -+ spin_unlock(&priv->rx_lock); -+ netif_rx_complete(priv->dev, napi); -+ netif_stop_queue(priv->dev); -+ napi_disable(&priv->napi); -+ -+ atomic_inc(&priv->reset_pending); -+ cpmac_hw_stop(priv->dev); -+ if (!schedule_work(&priv->reset_work)) -+ atomic_dec(&priv->reset_pending); -+ return 0; -+ - } - - static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev) -@@ -625,8 +717,10 @@ static void cpmac_clear_rx(struct net_de - desc->dataflags = CPMAC_OWN; - dev->stats.rx_dropped++; - } -+ desc->hw_next = desc->next->mapping; - desc = desc->next; - } -+ priv->rx_head->prev->hw_next = 0; - } - - static void cpmac_clear_tx(struct net_device *dev) -@@ -928,9 +1022,12 @@ static int cpmac_open(struct net_device - desc->buflen = CPMAC_SKB_SIZE; - desc->dataflags = CPMAC_OWN; - desc->next = &priv->rx_head[(i + 1) % priv->ring_size]; -+ desc->next->prev = desc; - desc->hw_next = (u32)desc->next->mapping; - } - -+ priv->rx_head->prev->hw_next = (u32)0; -+ - if ((res = request_irq(dev->irq, cpmac_irq, IRQF_SHARED, - dev->name, dev))) { - if (netif_msg_drv(priv)) diff --git a/target/linux/ar7/patches-2.6.24/170-cpmac_eth_fix.patch b/target/linux/ar7/patches-2.6.24/170-cpmac_eth_fix.patch deleted file mode 100644 index bebd453..0000000 --- a/target/linux/ar7/patches-2.6.24/170-cpmac_eth_fix.patch +++ /dev/null @@ -1,15 +0,0 @@ -Index: linux-2.6.24.7/drivers/net/cpmac.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/net/cpmac.c -+++ linux-2.6.24.7/drivers/net/cpmac.c -@@ -1178,9 +1178,7 @@ static int __devinit cpmac_probe(struct - priv->msg_enable = netif_msg_init(debug_level, 0xff); - memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr)); - -- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); -- -- priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0, -+ priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id, &cpmac_adjust_link, 0, - PHY_INTERFACE_MODE_MII); - if (IS_ERR(priv->phy)) { - if (netif_msg_drv(priv)) diff --git a/target/linux/ar7/patches-2.6.24/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.24/500-serial_kludge.patch deleted file mode 100644 index a66bc8a..0000000 --- a/target/linux/ar7/patches-2.6.24/500-serial_kludge.patch +++ /dev/null @@ -1,44 +0,0 @@ -Index: linux-2.6.24.7/drivers/serial/8250.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/serial/8250.c -+++ linux-2.6.24.7/drivers/serial/8250.c -@@ -267,6 +267,13 @@ static const struct serial8250_config ua - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, -+ [PORT_AR7] = { -+ .name = "TI-AR7", -+ .fifo_size = 16, -+ .tx_loadsz = 16, -+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, -+ .flags = UART_CAP_FIFO | UART_CAP_AFE, -+ }, - }; - - #if defined (CONFIG_SERIAL_8250_AU1X00) -@@ -2453,7 +2460,11 @@ static void serial8250_console_putchar(s - { - struct uart_8250_port *up = (struct uart_8250_port *)port; - -+#ifdef CONFIG_AR7 -+ wait_for_xmitr(up, BOTH_EMPTY); -+#else - wait_for_xmitr(up, UART_LSR_THRE); -+#endif - serial_out(up, UART_TX, ch); - } - -Index: linux-2.6.24.7/include/linux/serial_core.h -=================================================================== ---- linux-2.6.24.7.orig/include/linux/serial_core.h -+++ linux-2.6.24.7/include/linux/serial_core.h -@@ -40,7 +40,8 @@ - #define PORT_NS16550A 14 - #define PORT_XSCALE 15 - #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ --#define PORT_MAX_8250 16 /* max port ID */ -+#define PORT_AR7 17 -+#define PORT_MAX_8250 17 /* max port ID */ - - /* - * ARM specific type numbers. These are not currently guaranteed diff --git a/target/linux/ar7/patches-2.6.24/900-temporary_cpmac_hack.diff b/target/linux/ar7/patches-2.6.24/900-temporary_cpmac_hack.diff deleted file mode 100644 index dfd1a67..0000000 --- a/target/linux/ar7/patches-2.6.24/900-temporary_cpmac_hack.diff +++ /dev/null @@ -1,29 +0,0 @@ -Index: linux-2.6.24.7/drivers/net/cpmac.c -=================================================================== ---- linux-2.6.24.7.orig/drivers/net/cpmac.c -+++ linux-2.6.24.7/drivers/net/cpmac.c -@@ -936,7 +936,8 @@ static void cpmac_adjust_link(struct net - int new_state = 0; - - spin_lock(&priv->lock); -- if (priv->phy->link) { -+ if (1 /* priv->phy->link */ ) { -+ netif_carrier_on(dev); - netif_start_queue(dev); - if (priv->phy->duplex != priv->oldduplex) { - new_state = 1; -@@ -948,11 +949,11 @@ static void cpmac_adjust_link(struct net - priv->oldspeed = priv->phy->speed; - } - -- if (!priv->oldlink) { -+ /*if (!priv->oldlink) { - new_state = 1; -- priv->oldlink = 1; -+ priv->oldlink = 1;*/ - netif_schedule(dev); -- } -+ /*}*/ - } else if (priv->oldlink) { - netif_stop_queue(dev); - new_state = 1; diff --git a/target/linux/ar7/patches-2.6.25/100-board_support.patch b/target/linux/ar7/patches-2.6.25/100-board_support.patch deleted file mode 100644 index 658a80e..0000000 --- a/target/linux/ar7/patches-2.6.25/100-board_support.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -18,6 +18,24 @@ - prompt "System type" - default SGI_IP22 - -+config AR7 -+ bool "Texas Instruments AR7" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select CEVT_R4K -+ select CSRC_R4K -+ select IRQ_CPU -+ select NO_EXCEPT_FILL -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_KGDB -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select GENERIC_GPIO -+ select GENERIC_HARDIRQS_NO__DO_IRQ -+ - config MACH_ALCHEMY - bool "Alchemy processor based machines" - ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -1112,9 +1112,22 @@ - - exception_handlers[n] = handler; - if (n == 0 && cpu_has_divec) { -- *(u32 *)(ebase + 0x200) = 0x08000000 | -- (0x03ffffff & (handler >> 2)); -- flush_icache_range(ebase + 0x200, ebase + 0x204); -+ if ((handler ^ (ebase + 4)) & 0xfc000000) { -+ /* lui k0, 0x0000 */ -+ *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16); -+ /* ori k0, 0x0000 */ -+ *(u32 *)(ebase + 0x204) = -+ 0x375a0000 | (handler & 0xffff); -+ /* jr k0 */ -+ *(u32 *)(ebase + 0x208) = 0x03400008; -+ /* nop */ -+ *(u32 *)(ebase + 0x20C) = 0x00000000; -+ flush_icache_range(ebase + 0x200, ebase + 0x210); -+ } else { -+ *(u32 *)(ebase + 0x200) = -+ 0x08000000 | (0x03ffffff & (handler >> 2)); -+ flush_icache_range(ebase + 0x200, ebase + 0x204); -+ } - } - return (void *)old_handler; - } ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -167,6 +167,13 @@ - # - - # -+# Texas Instruments AR7 -+# -+core-$(CONFIG_AR7) += arch/mips/ar7/ -+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7 -+load-$(CONFIG_AR7) += 0xffffffff94100000 -+ -+# - # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. - # - core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ ---- a/include/asm-mips/page.h -+++ b/include/asm-mips/page.h -@@ -182,8 +182,10 @@ - #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - --#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE) --#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET) -+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \ -+ PHYS_OFFSET) -+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \ -+ PHYS_OFFSET) - - #include <asm-generic/memory_model.h> - #include <asm-generic/page.h> diff --git a/target/linux/ar7/patches-2.6.25/110-flash.patch b/target/linux/ar7/patches-2.6.25/110-flash.patch deleted file mode 100644 index 5f6b8f1..0000000 --- a/target/linux/ar7/patches-2.6.25/110-flash.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -168,6 +168,12 @@ - the partition map from the children of the flash node, - as described in Documentation/powerpc/booting-without-of.txt. - -+config MTD_AR7_PARTS -+ tristate "TI AR7 partitioning support" -+ depends on MTD_PARTITIONS -+ ---help--- -+ TI AR7 partitioning support -+ - comment "User Modules And Translation Layers" - - config MTD_CHAR ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -12,6 +12,7 @@ - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o - obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o -+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o ---- a/drivers/mtd/maps/physmap.c -+++ b/drivers/mtd/maps/physmap.c -@@ -87,7 +87,8 @@ - - static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; - #ifdef CONFIG_MTD_PARTITIONS --static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -+static const char *part_probe_types[] = {"cmdlinepart", "RedBoot", -+ "ar7part", NULL }; - #endif - - static int physmap_flash_probe(struct platform_device *dev) diff --git a/target/linux/ar7/patches-2.6.25/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.25/120-gpio_chrdev.patch deleted file mode 100644 index cd5d744..0000000 --- a/target/linux/ar7/patches-2.6.25/120-gpio_chrdev.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/char/Kconfig -+++ b/drivers/char/Kconfig -@@ -913,6 +913,15 @@ - To compile this driver as a module, choose M here: the - module will be called mwave. - -+config AR7_GPIO -+ tristate "TI AR7 GPIO Support" -+ depends on AR7 -+ help -+ Give userspace access to the GPIO pins on the Texas Instruments AR7 -+ processors. -+ -+ If compiled as a module, it will be called ar7_gpio. -+ - config SCx200_GPIO - tristate "NatSemi SCx200 GPIO Support" - depends on SCx200 ---- a/drivers/char/Makefile -+++ b/drivers/char/Makefile -@@ -90,6 +90,7 @@ - obj-$(CONFIG_PPDEV) += ppdev.o - obj-$(CONFIG_NWBUTTON) += nwbutton.o - obj-$(CONFIG_NWFLASH) += nwflash.o -+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o - obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o - obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o - obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o diff --git a/target/linux/ar7/patches-2.6.25/130-vlynq.patch b/target/linux/ar7/patches-2.6.25/130-vlynq.patch deleted file mode 100644 index f925258..0000000 --- a/target/linux/ar7/patches-2.6.25/130-vlynq.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/drivers/Kconfig -+++ b/drivers/Kconfig -@@ -97,4 +97,6 @@ - source "drivers/auxdisplay/Kconfig" - - source "drivers/uio/Kconfig" -+ -+source "drivers/vlynq/Kconfig" - endmenu ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -91,5 +91,6 @@ - obj-$(CONFIG_HID) += hid/ - obj-$(CONFIG_PPC_PS3) += ps3/ - obj-$(CONFIG_OF) += of/ -+obj-$(CONFIG_VLYNQ) += vlynq/ - obj-$(CONFIG_SSB) += ssb/ - obj-$(CONFIG_VIRTIO) += virtio/ diff --git a/target/linux/ar7/patches-2.6.25/140-cpmac_fix.patch b/target/linux/ar7/patches-2.6.25/140-cpmac_fix.patch deleted file mode 100644 index f6f29eb..0000000 --- a/target/linux/ar7/patches-2.6.25/140-cpmac_fix.patch +++ /dev/null @@ -1,167 +0,0 @@ ---- a/drivers/net/cpmac.c -+++ b/drivers/net/cpmac.c -@@ -38,6 +38,7 @@ - #include <linux/platform_device.h> - #include <linux/dma-mapping.h> - #include <asm/gpio.h> -+#include <asm/atomic.h> - - MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>"); - MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)"); -@@ -207,6 +208,7 @@ - struct work_struct reset_work; - struct platform_device *pdev; - struct napi_struct napi; -+ atomic_t reset_pending; - }; - - static irqreturn_t cpmac_irq(int, void *); -@@ -455,6 +457,9 @@ - struct cpmac_desc *desc; - struct cpmac_priv *priv = netdev_priv(dev); - -+ if (unlikely(atomic_read(&priv->reset_pending))) -+ return NETDEV_TX_BUSY; -+ - if (unlikely(skb_padto(skb, ETH_ZLEN))) - return NETDEV_TX_OK; - -@@ -634,14 +639,14 @@ - priv->desc_ring[i].dataflags = 0; - if (priv->desc_ring[i].skb) { - dev_kfree_skb_any(priv->desc_ring[i].skb); -- if (netif_subqueue_stopped(dev, i)) -- netif_wake_subqueue(dev, i); -+ priv->desc_ring[i].skb = NULL; - } - } - } - - static void cpmac_hw_error(struct work_struct *work) - { -+ int i; - struct cpmac_priv *priv = - container_of(work, struct cpmac_priv, reset_work); - -@@ -650,8 +655,47 @@ - spin_unlock(&priv->rx_lock); - cpmac_clear_tx(priv->dev); - cpmac_hw_start(priv->dev); -- napi_enable(&priv->napi); -- netif_start_queue(priv->dev); -+ barrier(); -+ atomic_dec(&priv->reset_pending); -+ -+ for (i = 0; i < CPMAC_QUEUES; i++) { -+ netif_wake_subqueue(priv->dev, i); -+ } -+ netif_wake_queue(priv->dev); -+ cpmac_write(priv->regs, CPMAC_MAC_INT_ENABLE, 3); -+} -+ -+static void cpmac_check_status(struct net_device *dev) -+{ -+ struct cpmac_priv *priv = netdev_priv(dev); -+ -+ u32 macstatus = cpmac_read(priv->regs, CPMAC_MAC_STATUS); -+ int rx_channel = (macstatus >> 8) & 7; -+ int rx_code = (macstatus >> 12) & 15; -+ int tx_channel = (macstatus >> 16) & 7; -+ int tx_code = (macstatus >> 20) & 15; -+ -+ if (rx_code || tx_code) { -+ if (netif_msg_drv(priv) && net_ratelimit()) { -+ /* Can't find any documentation on what these error codes actually are. -+ * So just log them and hope.. -+ */ -+ if (rx_code) -+ printk(KERN_WARNING "%s: host error %d on rx channel %d (macstatus %08x), resetting\n", -+ dev->name, rx_code, rx_channel, macstatus); -+ if (tx_code) -+ printk(KERN_WARNING "%s: host error %d on tx channel %d (macstatus %08x), resetting\n", -+ dev->name, tx_code, tx_channel, macstatus); -+ } -+ -+ netif_stop_queue(dev); -+ cpmac_hw_stop(dev); -+ if (schedule_work(&priv->reset_work)) -+ atomic_inc(&priv->reset_pending); -+ if (unlikely(netif_msg_hw(priv))) -+ cpmac_dump_regs(dev); -+ } -+ cpmac_write(priv->regs, CPMAC_MAC_INT_CLEAR, 0xff); - } - - static irqreturn_t cpmac_irq(int irq, void *dev_id) -@@ -682,49 +726,33 @@ - - cpmac_write(priv->regs, CPMAC_MAC_EOI_VECTOR, 0); - -- if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) { -- if (netif_msg_drv(priv) && net_ratelimit()) -- printk(KERN_ERR "%s: hw error, resetting...\n", -- dev->name); -- netif_stop_queue(dev); -- napi_disable(&priv->napi); -- cpmac_hw_stop(dev); -- schedule_work(&priv->reset_work); -- if (unlikely(netif_msg_hw(priv))) -- cpmac_dump_regs(dev); -- } -+ if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) -+ cpmac_check_status(dev); - - return IRQ_HANDLED; - } - - static void cpmac_tx_timeout(struct net_device *dev) - { -- struct cpmac_priv *priv = netdev_priv(dev); - int i; -+ struct cpmac_priv *priv = netdev_priv(dev); - - spin_lock(&priv->lock); - dev->stats.tx_errors++; - spin_unlock(&priv->lock); - if (netif_msg_tx_err(priv) && net_ratelimit()) - printk(KERN_WARNING "%s: transmit timeout\n", dev->name); -- /* -- * FIXME: waking up random queue is not the best thing to -- * do... on the other hand why we got here at all? -- */ --#ifdef CONFIG_NETDEVICES_MULTIQUEUE -- for (i = 0; i < CPMAC_QUEUES; i++) -- if (priv->desc_ring[i].skb) { -- priv->desc_ring[i].dataflags = 0; -- dev_kfree_skb_any(priv->desc_ring[i].skb); -- netif_wake_subqueue(dev, i); -- break; -- } --#else -- priv->desc_ring[0].dataflags = 0; -- if (priv->desc_ring[0].skb) -- dev_kfree_skb_any(priv->desc_ring[0].skb); -- netif_wake_queue(dev); --#endif -+ -+ atomic_inc(&priv->reset_pending); -+ barrier(); -+ cpmac_clear_tx(dev); -+ barrier(); -+ atomic_dec(&priv->reset_pending); -+ -+ netif_wake_queue(priv->dev); -+ for (i = 0; i < CPMAC_QUEUES; i++) { -+ netif_wake_subqueue(dev, i); -+ } - } - - static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -@@ -911,6 +939,7 @@ - goto fail_irq; - } - -+ atomic_set(&priv->reset_pending, 0); - INIT_WORK(&priv->reset_work, cpmac_hw_error); - cpmac_hw_start(dev); - diff --git a/target/linux/ar7/patches-2.6.25/150-cpmac_not_broken.patch b/target/linux/ar7/patches-2.6.25/150-cpmac_not_broken.patch deleted file mode 100644 index 6444cac..0000000 --- a/target/linux/ar7/patches-2.6.25/150-cpmac_not_broken.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -1874,7 +1874,7 @@ - - config CPMAC - tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" -- depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN -+ depends on NET_ETHERNET && EXPERIMENTAL && AR7 - select PHYLIB - help - TI AR7 CPMAC Ethernet support diff --git a/target/linux/ar7/patches-2.6.25/150-cpmac_up_and_running.diff b/target/linux/ar7/patches-2.6.25/150-cpmac_up_and_running.diff deleted file mode 100644 index f0f153b..0000000 --- a/target/linux/ar7/patches-2.6.25/150-cpmac_up_and_running.diff +++ /dev/null @@ -1,91 +0,0 @@ -From 0daaa095cefd9d7091a7ccce2ff89f1ff4feae7a Mon Sep 17 00:00:00 2001 -From: Anton Vorontsov <avorontsov@ru.mvista.com> -Date: Wed, 5 Mar 2008 14:52:26 +0300 -Subject: [PATCH] AR7/cpmac: convert to new fixed phy infrastructure, now for real - -This patch converts platform code to register fixed phys early. -cpmac driver modified to blindly accept fixed phy id (that is equal -to platform device id). - -Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> ---- - arch/mips/ar7/platform.c | 17 +++++++++++++++++ - drivers/net/cpmac.c | 19 +++---------------- - 2 files changed, 20 insertions(+), 16 deletions(-) - ---- a/arch/mips/ar7/platform.c -+++ b/arch/mips/ar7/platform.c -@@ -33,6 +33,8 @@ - #include <linux/vlynq.h> - #include <linux/leds.h> - #include <linux/string.h> -+#include <linux/phy.h> -+#include <linux/phy_fixed.h> - - #include <asm/addrspace.h> - #include <asm/ar7/ar7.h> -@@ -205,6 +207,13 @@ - .width = 2, - }; - -+/* lets assume this is suitable for both high and low cpmacs links */ -+static struct fixed_phy_status fixed_phy_status __initdata = { -+ .link = 1, -+ .speed = 100, -+ .duplex = 1, -+}; -+ - static struct plat_cpmac_data cpmac_low_data = { - .reset_bit = 17, - .power_bit = 20, -@@ -506,6 +515,10 @@ - } - - if (ar7_has_high_cpmac()) { -+ res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status); -+ if (res && res != -ENODEV) -+ return res; -+ - cpmac_get_mac(1, cpmac_high_data.dev_addr); - res = platform_device_register(&cpmac_high); - if (res) -@@ -514,6 +527,10 @@ - cpmac_low_data.phy_mask = 0xffffffff; - } - -+ res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status); -+ if (res && res != -ENODEV) -+ return res; -+ - cpmac_get_mac(0, cpmac_low_data.dev_addr); - res = platform_device_register(&cpmac_low); - if (res) ---- a/drivers/net/cpmac.c -+++ b/drivers/net/cpmac.c -@@ -1035,23 +1035,10 @@ - - if (phy_id == PHY_MAX_ADDR) { - if (external_switch || dumb_switch) { -- struct fixed_phy_status status = {}; -- -- mdio_bus_id = 0; -- -- /* -- * FIXME: this should be in the platform code! -- * Since there is not platform code at all (that is, -- * no mainline users of that driver), place it here -- * for now. -- */ -- phy_id = 0; -- status.link = 1; -- status.duplex = 1; -- status.speed = 100; -- fixed_phy_add(PHY_POLL, phy_id, &status); -+ mdio_bus_id = 0; /* fixed phys bus */ -+ phy_id = pdev->id; - } else { -- printk(KERN_ERR "cpmac: no PHY present\n"); -+ dev_err(&pdev->dev, "no PHY present\n"); - return -ENODEV; - } - } diff --git a/target/linux/ar7/patches-2.6.25/160-cpmac-rx-ring-use-eoq.diff b/target/linux/ar7/patches-2.6.25/160-cpmac-rx-ring-use-eoq.diff deleted file mode 100644 index 24d70e7..0000000 --- a/target/linux/ar7/patches-2.6.25/160-cpmac-rx-ring-use-eoq.diff +++ /dev/null @@ -1,178 +0,0 @@ ---- a/drivers/net/cpmac.c -+++ b/drivers/net/cpmac.c -@@ -187,6 +187,7 @@ - #define CPMAC_EOQ 0x1000 - struct sk_buff *skb; - struct cpmac_desc *next; -+ struct cpmac_desc *prev; - dma_addr_t mapping; - dma_addr_t data_mapping; - }; -@@ -242,6 +243,16 @@ - printk("\n"); - } - -+static void cpmac_dump_all_desc(struct net_device *dev) -+{ -+ struct cpmac_priv *priv = netdev_priv(dev); -+ struct cpmac_desc *dump = priv->rx_head; -+ do { -+ cpmac_dump_desc(dev, dump); -+ dump = dump->next; -+ } while (dump != priv->rx_head); -+} -+ - static void cpmac_dump_skb(struct net_device *dev, struct sk_buff *skb) - { - int i; -@@ -413,21 +424,40 @@ - static int cpmac_poll(struct napi_struct *napi, int budget) - { - struct sk_buff *skb; -- struct cpmac_desc *desc; -- int received = 0; -+ struct cpmac_desc *desc, *restart; - struct cpmac_priv *priv = container_of(napi, struct cpmac_priv, napi); -+ int received = 0, processed = 0; - - spin_lock(&priv->rx_lock); - if (unlikely(!priv->rx_head)) { - if (netif_msg_rx_err(priv) && net_ratelimit()) - printk(KERN_WARNING "%s: rx: polling, but no queue\n", - priv->dev->name); -+ spin_unlock(&priv->rx_lock); - netif_rx_complete(priv->dev, napi); - return 0; - } - - desc = priv->rx_head; -+ restart = NULL; - while (((desc->dataflags & CPMAC_OWN) == 0) && (received < budget)) { -+ processed++; -+ -+ if ((desc->dataflags & CPMAC_EOQ) != 0) { -+ /* The last update to eoq->hw_next didn't happen soon enough, and the -+ * receiver stopped here. Remember this descriptor so we can restart -+ * the receiver after freeing some space. -+ */ -+ if (unlikely(restart)) { -+ if (netif_msg_rx_err(priv)) -+ printk(KERN_ERR "%s: poll found a duplicate EOQ: %p and %p\n", -+ priv->dev->name, restart, desc); -+ goto fatal_error; -+ } -+ -+ restart = desc->next; -+ } -+ - skb = cpmac_rx_one(priv, desc); - if (likely(skb)) { - netif_receive_skb(skb); -@@ -436,19 +466,81 @@ - desc = desc->next; - } - -+ if (desc != priv->rx_head) { -+ /* We freed some buffers, but not the whole ring, add what we did free to the rx list */ -+ desc->prev->hw_next = (u32)0; -+ priv->rx_head->prev->hw_next = priv->rx_head->mapping; -+ } -+ -+ /* Optimization: If we did not actually process an EOQ (perhaps because of -+ * quota limits), check to see if the tail of the queue has EOQ set. We -+ * should immediately restart in that case so that the receiver can restart -+ * and run in parallel with more packet processing. This lets us handle slightly -+ * larger bursts before running out of ring space (assuming dev->weight < ring_size) -+ */ -+ if (!restart && -+ (priv->rx_head->prev->dataflags & (CPMAC_OWN|CPMAC_EOQ)) == CPMAC_EOQ && -+ (priv->rx_head->dataflags & CPMAC_OWN) != 0) { -+ /* reset EOQ so the poll loop (above) doesn't try to restart this when it -+ * eventually gets to this descriptor. -+ */ -+ priv->rx_head->prev->dataflags &= ~CPMAC_EOQ; -+ restart = priv->rx_head; -+ } -+ -+ if (restart) { -+ priv->dev->stats.rx_errors++; -+ priv->dev->stats.rx_fifo_errors++; -+ if (netif_msg_rx_err(priv) && net_ratelimit()) -+ printk(KERN_WARNING "%s: rx dma ring overrun\n", priv->dev->name); -+ -+ if (unlikely((restart->dataflags & CPMAC_OWN) == 0)) { -+ if (netif_msg_drv(priv)) -+ printk(KERN_ERR "%s: cpmac_poll is trying to restart rx from a descriptor that's not free: %p\n", -+ priv->dev->name, restart); -+ goto fatal_error; -+ } -+ -+ cpmac_write(priv->regs, CPMAC_RX_PTR(0), restart->mapping); -+ } -+ - priv->rx_head = desc; - spin_unlock(&priv->rx_lock); - if (unlikely(netif_msg_rx_status(priv))) - printk(KERN_DEBUG "%s: poll processed %d packets\n", - priv->dev->name, received); -- if (desc->dataflags & CPMAC_OWN) { -+ if (processed == 0) { -+ /* we ran out of packets to read, revert to interrupt-driven mode */ - netif_rx_complete(priv->dev, napi); -- cpmac_write(priv->regs, CPMAC_RX_PTR(0), (u32)desc->mapping); - cpmac_write(priv->regs, CPMAC_RX_INT_ENABLE, 1); - return 0; - } - - return 1; -+ -+fatal_error: -+ /* Something went horribly wrong. Reset hardware to try to recover rather than wedging. */ -+ -+ if (netif_msg_drv(priv)) { -+ printk(KERN_ERR "%s: cpmac_poll is confused. Resetting hardware\n", priv->dev->name); -+ cpmac_dump_all_desc(priv->dev); -+ printk(KERN_DEBUG "%s: RX_PTR(0)=0x%08x RX_ACK(0)=0x%08x\n", -+ priv->dev->name, -+ cpmac_read(priv->regs, CPMAC_RX_PTR(0)), -+ cpmac_read(priv->regs, CPMAC_RX_ACK(0))); -+ } -+ -+ spin_unlock(&priv->rx_lock); -+ netif_rx_complete(priv->dev, napi); -+ netif_stop_queue(priv->dev); -+ napi_disable(&priv->napi); -+ -+ atomic_inc(&priv->reset_pending); -+ cpmac_hw_stop(priv->dev); -+ if (!schedule_work(&priv->reset_work)) -+ atomic_dec(&priv->reset_pending); -+ return 0; -+ - } - - static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev) -@@ -625,8 +717,10 @@ - desc->dataflags = CPMAC_OWN; - dev->stats.rx_dropped++; - } -+ desc->hw_next = desc->next->mapping; - desc = desc->next; - } -+ priv->rx_head->prev->hw_next = 0; - } - - static void cpmac_clear_tx(struct net_device *dev) -@@ -928,9 +1022,12 @@ - desc->buflen = CPMAC_SKB_SIZE; - desc->dataflags = CPMAC_OWN; - desc->next = &priv->rx_head[(i + 1) % priv->ring_size]; -+ desc->next->prev = desc; - desc->hw_next = (u32)desc->next->mapping; - } - -+ priv->rx_head->prev->hw_next = (u32)0; -+ - if ((res = request_irq(dev->irq, cpmac_irq, IRQF_SHARED, - dev->name, dev))) { - if (netif_msg_drv(priv)) diff --git a/target/linux/ar7/patches-2.6.25/170-cpmac_eth_fix.patch b/target/linux/ar7/patches-2.6.25/170-cpmac_eth_fix.patch deleted file mode 100644 index 0942b1c..0000000 --- a/target/linux/ar7/patches-2.6.25/170-cpmac_eth_fix.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/net/cpmac.c -+++ b/drivers/net/cpmac.c -@@ -1178,9 +1178,7 @@ - priv->msg_enable = netif_msg_init(debug_level, 0xff); - memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr)); - -- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); -- -- priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0, -+ priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id, &cpmac_adjust_link, 0, - PHY_INTERFACE_MODE_MII); - if (IS_ERR(priv->phy)) { - if (netif_msg_drv(priv)) diff --git a/target/linux/ar7/patches-2.6.25/200-mtd_fixes.patch b/target/linux/ar7/patches-2.6.25/200-mtd_fixes.patch deleted file mode 100644 index 850a643..0000000 --- a/target/linux/ar7/patches-2.6.25/200-mtd_fixes.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/drivers/mtd/ar7part.c -+++ b/drivers/mtd/ar7part.c -@@ -34,6 +34,10 @@ - #define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42) - #define LOADER_MAGIC2 le32_to_cpu(0xfeed1281) - -+#ifndef SQUASHFS_MAGIC -+#define SQUASHFS_MAGIC 0x73717368 -+#endif -+ - struct ar7_bin_rec { - unsigned int checksum; - unsigned int length; -@@ -47,7 +51,8 @@ - unsigned long origin) - { - struct ar7_bin_rec header; -- unsigned int offset, len; -+ unsigned int offset; -+ size_t len; - unsigned int pre_size = master->erasesize, post_size = 0; - unsigned int root_offset = ROOT_OFFSET; - -@@ -66,7 +71,7 @@ - do { /* Try 10 blocks starting from master->erasesize */ - offset = pre_size; - master->read(master, offset, -- sizeof(header), &len, (u8 *)&header); -+ sizeof(header), &len, (uint8_t *)&header); - if (!strncmp((char *)&header, "TIENV0.8", 8)) - ar7_parts[1].offset = pre_size; - if (header.checksum == LOADER_MAGIC1) -@@ -88,7 +93,7 @@ - while (header.length) { - offset += sizeof(header) + header.length; - master->read(master, offset, sizeof(header), -- &len, (u8 *)&header); -+ &len, (uint8_t *)&header); - } - root_offset = offset + sizeof(header) + 4; - break; -@@ -96,10 +101,10 @@ - while (header.length) { - offset += sizeof(header) + header.length; - master->read(master, offset, sizeof(header), -- &len, (u8 *)&header); -+ &len, (uint8_t *)&header); - } - root_offset = offset + sizeof(header) + 4 + 0xff; -- root_offset &= ~(u32)0xff; -+ root_offset &= ~(uint32_t)0xff; - break; - default: - printk(KERN_WARNING "Unknown magic: %08x\n", header.checksum); diff --git a/target/linux/ar7/patches-2.6.25/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.25/500-serial_kludge.patch deleted file mode 100644 index 26b4b3e..0000000 --- a/target/linux/ar7/patches-2.6.25/500-serial_kludge.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/drivers/serial/8250.c -+++ b/drivers/serial/8250.c -@@ -267,6 +267,13 @@ - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, -+ [PORT_AR7] = { -+ .name = "TI-AR7", -+ .fifo_size = 16, -+ .tx_loadsz = 16, -+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, -+ .flags = UART_CAP_FIFO | UART_CAP_AFE, -+ }, - }; - - #if defined (CONFIG_SERIAL_8250_AU1X00) -@@ -2457,7 +2464,11 @@ - { - struct uart_8250_port *up = (struct uart_8250_port *)port; - -+#ifdef CONFIG_AR7 -+ wait_for_xmitr(up, BOTH_EMPTY); -+#else - wait_for_xmitr(up, UART_LSR_THRE); -+#endif - serial_out(up, UART_TX, ch); - } - ---- a/include/linux/serial_core.h -+++ b/include/linux/serial_core.h -@@ -40,7 +40,8 @@ - #define PORT_NS16550A 14 - #define PORT_XSCALE 15 - #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ --#define PORT_MAX_8250 16 /* max port ID */ -+#define PORT_AR7 17 -+#define PORT_MAX_8250 17 /* max port ID */ - - /* - * ARM specific type numbers. These are not currently guaranteed diff --git a/target/linux/ar7/patches-2.6.25/900-temporary_cpmac_hack.diff b/target/linux/ar7/patches-2.6.25/900-temporary_cpmac_hack.diff deleted file mode 100644 index 7da22cd..0000000 --- a/target/linux/ar7/patches-2.6.25/900-temporary_cpmac_hack.diff +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/net/cpmac.c -+++ b/drivers/net/cpmac.c -@@ -936,7 +936,8 @@ - int new_state = 0; - - spin_lock(&priv->lock); -- if (priv->phy->link) { -+ if (1 /* priv->phy->link */) { -+ netif_carrier_on(dev); - netif_start_queue(dev); - if (priv->phy->duplex != priv->oldduplex) { - new_state = 1; -@@ -948,11 +949,11 @@ - priv->oldspeed = priv->phy->speed; - } - -- if (!priv->oldlink) { -+ /*if (!priv->oldlink) { - new_state = 1; -- priv->oldlink = 1; -+ priv->oldlink = 1;*/ - netif_schedule(dev); -- } -+ /*}*/ - } else if (priv->oldlink) { - netif_stop_queue(dev); - new_state = 1; |