arc: use patched .dts from sources

Instead of using off-the-tree .dts files for ARC boards we're
switching to use in-tree ones. And for that to work properly
we apply upstream patch that adds currently missing "model"
property.

Upstream patch and discussion could be found here:
http://lists.infradead.org/pipermail/linux-snps-arc/2016-August/001394.html

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: John Crispin <john@phrozen.org>

6 files changed, 1 insertions, 487 deletions

diff --git a/target/linux/archs38/dts/axc003_idu.dtsi b/target/linux/archs38/dts/axc003_idu.dtsi
deleted file mode 100644
index 06a9f29..0000000
--- a/target/linux/archs38/dts/axc003_idu.dtsi
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc
- */
-
-/ {
-	compatible = "snps,arc";
-	clock-frequency = <90000000>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpu_card {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0x00000000 0xf0000000 0x10000000>;
-
-		cpu_intc: archs-intc@cpu {
-			compatible = "snps,archs-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		idu_intc: idu-interrupt-controller {
-			compatible = "snps,archs-idu-intc";
-			interrupt-controller;
-			interrupt-parent = <&cpu_intc>;
-
-			/*
-			 * <hwirq  distribution>
-			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-			 */
-			#interrupt-cells = <2>;
-
-			/*
-			 * upstream irqs to core intc - downstream these are
-			 * "COMMON" irq 0,1..
-			 */
-			interrupts = <24 25>;
-		};
-
-		/*
-		 * this GPIO block ORs all interrupts on CPU card (creg,..)
-		 * to uplink only 1 IRQ to ARC core intc
-		 */
-		dw-apb-gpio@0x2000 {
-			compatible = "snps,dw-apb-gpio";
-			reg = < 0x2000 0x80 >;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ictl_intc: gpio-controller@0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
-				reg = <0>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupt-parent = <&idu_intc>;
-
-				/*
-				 * cmn irq 1 -> cpu irq 25
-				 * Distribute to cpu0 only
-				 */
-				interrupts = <1 1>;
-			};
-		};
-
-		debug_uart: dw-apb-uart@0x5000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x5000 0x100>;
-			clock-frequency = <33333000>;
-			interrupt-parent = <&ictl_intc>;
-			interrupts = <2 4>;
-			baud = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		arcpct0: pct {
-			compatible = "snps,archs-pct";
-			#interrupt-cells = <1>;
-			interrupt-parent = <&cpu_intc>;
-			interrupts = <20>;
-		};
-	};
-
-	/*
-	 * This INTC is actually connected to DW APB GPIO
-	 * which acts as a wire between MB INTC and CPU INTC.
-	 * GPIO INTC is configured in platform init code
-	 * and here we mimic direct connection from MB INTC to
-	 * CPU INTC, thus we set "interrupts = <0 1>" instead of
-	 * "interrupts = <12>"
-	 *
-	 * This intc actually resides on MB, but we move it here to
-	 * avoid duplicating the MB dtsi file given that IRQ from
-	 * this intc to cpu intc are different for axs101 and axs103
-	 */
-	mb_intc: dw-apb-ictl@0xe0012000 {
-		#interrupt-cells = <1>;
-		compatible = "snps,dw-apb-ictl";
-		reg = < 0xe0012000 0x200 >;
-		interrupt-controller;
-		interrupt-parent = <&idu_intc>;
-		interrupts = <0 1>;	/* cmn irq 0 -> cpu irq 24
-					   distribute to cpu0 only */
-	};
-
-	memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0x80000000 0x40000000>;
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;	/* 512MiB */
-	};
-};
diff --git a/target/linux/archs38/dts/axs103_idu.dts b/target/linux/archs38/dts/axs103_idu.dts
deleted file mode 100644
index 9c4bf0f..0000000
--- a/target/linux/archs38/dts/axs103_idu.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Device Tree for AXS103 SDP with AXS10X Main Board and
- * AXC003 FPGA Card (with SMP bitfile)
- */
-/dts-v1/;
-
-/include/ "axc003_idu.dtsi"
-/include/ "axs10x_mb.dtsi"
-
-/ {
-	model = "Synopsys AXS103 Development Board";
-	compatible = "snps,axs103", "snps,arc-sdp";
-
-	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8";
-	};
-};
diff --git a/target/linux/archs38/dts/axs10x_mb.dtsi b/target/linux/archs38/dts/axs10x_mb.dtsi
deleted file mode 100644
index 44a578c..0000000
--- a/target/linux/archs38/dts/axs10x_mb.dtsi
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Support for peripherals on the AXS10x mainboard
- *
- * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	axs10x_mb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0xe0000000 0x10000000>;
-		interrupt-parent = <&mb_intc>;
-
-		clocks {
-			i2cclk: i2cclk {
-				compatible = "fixed-clock";
-				clock-frequency = <50000000>;
-				#clock-cells = <0>;
-			};
-
-			apbclk: apbclk {
-				compatible = "fixed-clock";
-				clock-frequency = <50000000>;
-				#clock-cells = <0>;
-			};
-
-			mmcclk: mmcclk {
-				compatible = "fixed-clock";
-				clock-frequency = <50000000>;
-				#clock-cells = <0>;
-			};
-		};
-
-		ethernet@0x18000 {
-			#interrupt-cells = <1>;
-			compatible = "snps,dwmac";
-			reg = < 0x18000 0x2000 >;
-			interrupts = < 4 >;
-			interrupt-names = "macirq";
-			phy-mode = "rgmii";
-			snps,pbl = < 32 >;
-			clocks = <&apbclk>;
-			clock-names = "stmmaceth";
-			max-speed = <100>;
-		};
-
-		ehci@0x40000 {
-			compatible = "generic-ehci";
-			reg = < 0x40000 0x100 >;
-			interrupts = < 8 >;
-		};
-
-		ohci@0x60000 {
-			compatible = "generic-ohci";
-			reg = < 0x60000 0x100 >;
-			interrupts = < 8 >;
-		};
-
-		/*
-		 * According to DW Mobile Storage databook it is required
-		 * to use  "Hold Register" if card is enumerated in SDR12 or
-		 * SDR25 modes.
-		 *
-		 * Utilization of "Hold Register" is already implemented via
-		 * dw_mci_pltfm_prepare_command() which in its turn gets
-		 * used through dw_mci_drv_data->prepare_command call-back.
-		 * This call-back is used in Altera Socfpga platform and so
-		 * we may reuse it saying that we're compatible with their
-		 * "altr,socfpga-dw-mshc".
-		 *
-		 * Most probably "Hold Register" utilization is platform-
-		 * independent requirement which means that single unified
-		 * "snps,dw-mshc" should be enough for all users of DW MMC once
-		 * dw_mci_pltfm_prepare_command() is used in generic platform
-		 * code.
-		 */
-		mmc@0x15000 {
-			compatible = "altr,socfpga-dw-mshc";
-			reg = < 0x15000 0x400 >;
-			num-slots = < 1 >;
-			fifo-depth = < 16 >;
-			card-detect-delay = < 200 >;
-			clocks = <&apbclk>, <&mmcclk>;
-			clock-names = "biu", "ciu";
-			interrupts = < 7 >;
-			bus-width = < 4 >;
-		};
-
-		uart@0x20000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x20000 0x100>;
-			clock-frequency = <33333333>;
-			interrupts = <17>;
-			baud = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uart@0x21000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x21000 0x100>;
-			clock-frequency = <33333333>;
-			interrupts = <18>;
-			baud = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		/* UART muxed with USB data port (ttyS3) */
-		uart@0x22000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x22000 0x100>;
-			clock-frequency = <33333333>;
-			interrupts = <19>;
-			baud = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		i2c@0x1d000 {
-			compatible = "snps,designware-i2c";
-			reg = <0x1d000 0x100>;
-			clock-frequency = <400000>;
-			clocks = <&i2cclk>;
-			interrupts = <14>;
-		};
-
-		i2c@0x1e000 {
-			compatible = "snps,designware-i2c";
-			reg = <0x1e000 0x100>;
-			clock-frequency = <400000>;
-			clocks = <&i2cclk>;
-			interrupts = <15>;
-		};
-
-		i2c@0x1f000 {
-			compatible = "snps,designware-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1f000 0x100>;
-			clock-frequency = <400000>;
-			clocks = <&i2cclk>;
-			interrupts = <16>;
-
-			eeprom@0x54{
-				compatible = "24c01";
-				reg = <0x54>;
-				pagesize = <0x8>;
-			};
-
-			eeprom@0x57{
-				compatible = "24c04";
-				reg = <0x57>;
-				pagesize = <0x8>;
-			};
-		};
-
-		gpio0:gpio@13000 {
-			compatible = "snps,dw-apb-gpio";
-			reg = <0x13000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio0_banka: gpio-controller@0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
-				reg = <0>;
-			};
-
-			gpio0_bankb: gpio-controller@1 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
-				reg = <1>;
-			};
-
-			gpio0_bankc: gpio-controller@2 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
-				reg = <2>;
-			};
-		};
-
-		gpio1:gpio@14000 {
-			compatible = "snps,dw-apb-gpio";
-			reg = <0x14000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio1_banka: gpio-controller@0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
-				reg = <0>;
-			};
-
-			gpio1_bankb: gpio-controller@1 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <10>;
-				reg = <1>;
-			};
-
-			gpio1_bankc: gpio-controller@2 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
-				reg = <2>;
-			};
-		};
-	};
-};
diff --git a/target/linux/archs38/dts/nsim_hs_idu.dts b/target/linux/archs38/dts/nsim_hs_idu.dts
deleted file mode 100644
index 75f539b..0000000
--- a/target/linux/archs38/dts/nsim_hs_idu.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "Synopsys ARC HS38 nSIM simulator";
-	compatible = "snps,nsim_hs";
-	interrupt-parent = <&core_intc>;
-
-	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
-	};
-
-	aliases {
-		serial0 = &arcuart0;
-	};
-
-	fpga {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* child and parent address space 1:1 mapped */
-		ranges;
-
-		core_intc: core-interrupt-controller {
-			compatible = "snps,archs-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		idu_intc: idu-interrupt-controller {
-			compatible = "snps,archs-idu-intc";
-			interrupt-controller;
-			interrupt-parent = <&core_intc>;
-
-			/*
-			 * <hwirq  distribution>
-			 * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
-			 */
-			#interrupt-cells = <2>;
-
-			/*
-			 * upstream irqs to core intc - downstream these are
-			 * "COMMON" irq 0,1..
-			 */
-			interrupts = <24 25 26 27 28 29 30 31>;
-		};
-
-		arcuart0: serial@c0fc1000 {
-			compatible = "snps,arc-uart";
-			reg = <0xc0fc1000 0x100>;
-			interrupt-parent = <&idu_intc>;
-			interrupts = <0 0>;
-			clock-frequency = <80000000>;
-			current-speed = <115200>;
-			status = "okay";
-		};
-
-		arcpct0: pct {
-			compatible = "snps,archs-pct";
-			#interrupt-cells = <1>;
-			interrupts = <20>;
-		};
-	};
-};
diff --git a/target/linux/archs38/dts/skeleton.dtsi b/target/linux/archs38/dts/skeleton.dtsi
deleted file mode 100644
index 296d371..0000000
--- a/target/linux/archs38/dts/skeleton.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Skeleton device tree; the bare minimum needed to boot; just include and
- * add a compatible value.
- */
-
-/ {
-	compatible = "snps,arc";
-	clock-frequency = <80000000>;	/* 80 MHZ */
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-	aliases { };
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "snps,arc770d";
-			reg = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256M */
-	};
-};
diff --git a/target/linux/archs38/image/Makefile b/target/linux/archs38/image/Makefile
index 42b13e6..bda7f3f 100644
--- a/target/linux/archs38/image/Makefile
+++ b/target/linux/archs38/image/Makefile
@@ -15,7 +15,7 @@ define Build/calculate-ep
 endef
 
 define Build/patch-dtb
-	$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
+	$(call Image/BuildDTB,$(DTS_DIR)/$(DEVICE_DTS).dts,$@.dtb)
 	$(STAGING_DIR_HOST)/bin/patch-dtb $@ $@.dtb
 endef