strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

SVN-Revision: 8653

1 files changed, 0 insertions, 160 deletions

diff --git a/target/linux/at91-2.6/patches-2.6.21/008-fdl-serial.patch b/target/linux/at91-2.6/patches-2.6.21/008-fdl-serial.patch
deleted file mode 100644
index 4258919..0000000
--- a/target/linux/at91-2.6/patches-2.6.21/008-fdl-serial.patch
+++ /dev/null
@@ -1,160 +0,0 @@
---- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/serial/atmel_serial.c	2007-05-28 16:39:09.000000000 +0200
-@@ -174,7 +174,35 @@
- 				at91_set_gpio_value(AT91_PIN_PA21, 0);
- 			else
- 				at91_set_gpio_value(AT91_PIN_PA21, 1);
-+
-+      /*
-+       * FDL VersaLink adds GPIOS to provide full modem control on
-+       * USART 0 - Drive DTR and RI pins manually
-+       */
-+      if (mctrl & TIOCM_DTR)
-+        at91_set_gpio_value(AT91_PIN_PB6, 0);
-+      else
-+        at91_set_gpio_value(AT91_PIN_PB6, 1);
-+      if (mctrl & TIOCM_RI)
-+        at91_set_gpio_value(AT91_PIN_PB7, 0);
-+      else
-+        at91_set_gpio_value(AT91_PIN_PB7, 1);
- 		}
-+
-+    /*
-+     * FDL VersaLink adds GPIOS to provide full modem control on
-+     * USART 3 - Drive DTR and RI pins manually
-+     */
-+    if (port->mapbase == AT91RM9200_BASE_US3) {
-+      if (mctrl & TIOCM_DTR)
-+        at91_set_gpio_value(AT91_PIN_PB29, 0);
-+      else
-+        at91_set_gpio_value(AT91_PIN_PB29, 1);
-+      if (mctrl & TIOCM_RI)
-+        at91_set_gpio_value(AT91_PIN_PB2, 0);
-+      else
-+        at91_set_gpio_value(AT91_PIN_PB2, 1);
-+    }
- 	}
- #endif
- 
-@@ -211,8 +239,10 @@
- 	/*
- 	 * The control signals are active low.
- 	 */
--	if (!(status & ATMEL_US_DCD))
--		ret |= TIOCM_CD;
-+
-+  if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
-+		if (!(status & ATMEL_US_DCD))
-+			ret |= TIOCM_CD;
- 	if (!(status & ATMEL_US_CTS))
- 		ret |= TIOCM_CTS;
- 	if (!(status & ATMEL_US_DSR))
-@@ -220,6 +250,16 @@
- 	if (!(status & ATMEL_US_RI))
- 		ret |= TIOCM_RI;
- 
-+  /*
-+   * Read the GPIO's for the FDL VersaLink special case
-+   */
-+  if (port->mapbase == AT91RM9200_BASE_US0)
-+    if (!(at91_get_gpio_value(AT91_PIN_PA19)))
-+      ret |= TIOCM_CD;
-+  if (port->mapbase == AT91RM9200_BASE_US3)
-+    if (!(at91_get_gpio_value(AT91_PIN_PA24)))
-+      ret |= TIOCM_CD;
-+
- 	return ret;
- }
- 
-@@ -511,6 +551,34 @@
- }
- 
- /*
-+ * USART0 DCD Interrupt handler
-+ */
-+
-+static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id)
-+{
-+  struct uart_port *port = dev_id;
-+  int status = at91_get_gpio_value(irq);
-+
-+  uart_handle_dcd_change(port, !(status));
-+
-+  return IRQ_HANDLED;
-+}
-+
-+/*
-+ * USART3 DCD Interrupt handler
-+ */
-+
-+static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id)
-+{
-+  struct uart_port *port = dev_id;
-+  int status = at91_get_gpio_value(irq);
-+
-+  uart_handle_dcd_change(port, !(status));
-+
-+  return IRQ_HANDLED;
-+}
-+
-+/*
-  * Interrupt handler
-  */
- static irqreturn_t atmel_interrupt(int irq, void *dev_id)
-@@ -587,6 +655,23 @@
- 		return retval;
- 	}
- 
-+	if (port->mapbase == AT91RM9200_BASE_US0) {
-+		retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port);
-+		if (retval) {
-+			printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n");
-+			free_irq(port->irq, port);
-+			return retval;
-+		}
-+	}
-+	if (port->mapbase == AT91RM9200_BASE_US3) {
-+		retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port);
-+		if (retval) {
-+			printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n");
-+			free_irq(port->irq, port);
-+			return retval;
-+		}
-+	}
-+
- 	/*
- 	 * Initialize DMA (if necessary)
- 	 */
-@@ -603,6 +688,10 @@
- 					kfree(atmel_port->pdc_rx[0].buf);
- 				}
- 				free_irq(port->irq, port);
-+        if (port->mapbase == AT91RM9200_BASE_US0)
-+          free_irq(AT91_PIN_PA19, port);
-+        if (port->mapbase == AT91RM9200_BASE_US3)
-+          free_irq(AT91_PIN_PA24, port);
- 				return -ENOMEM;
- 			}
- 			pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-@@ -636,6 +725,10 @@
- 		retval = atmel_open_hook(port);
- 		if (retval) {
- 			free_irq(port->irq, port);
-+      if (port->mapbase == AT91RM9200_BASE_US0)
-+        free_irq(AT91_PIN_PA19, port);
-+      if (port->mapbase == AT91RM9200_BASE_US3)
-+        free_irq(AT91_PIN_PA24, port);
- 			return retval;
- 		}
- 	}
-@@ -701,6 +794,10 @@
- 	 * Free the interrupt
- 	 */
- 	free_irq(port->irq, port);
-+  if (port->mapbase == AT91RM9200_BASE_US0)
-+    free_irq(AT91_PIN_PA19, port);
-+  if (port->mapbase == AT91RM9200_BASE_US3)
-+    free_irq(AT91_PIN_PA24, port);
- 
- 	/*
- 	 * If there is a specific "close" function (to unregister