Removed romboot from tree - replaced by dfboot

SVN-Revision: 7500

9 files changed, 0 insertions, 3380 deletions

diff --git a/target/linux/at91-2.6/image/Makefile b/target/linux/at91-2.6/image/Makefile
index b498059..f0b9dc5 100644
--- a/target/linux/at91-2.6/image/Makefile
+++ b/target/linux/at91-2.6/image/Makefile
@@ -9,13 +9,11 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
 define Build/Clean
-#	$(MAKE) -C romboot clean
 	$(MAKE) -C dfboot clean
 	$(MAKE) -C u-boot clean
 endef
 
 define Build/Compile
-#	$(MAKE) -C romboot compile
 	$(MAKE) -C dfboot compile
 	$(MAKE) -C u-boot compile
 	$(KDIR)/u-boot-1.1.4/tools/ubparams
diff --git a/target/linux/at91-2.6/image/romboot/Makefile b/target/linux/at91-2.6/image/romboot/Makefile
deleted file mode 100644
index 586a481..0000000
--- a/target/linux/at91-2.6/image/romboot/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=romboot
-PKG_VERSION:=0.1
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)
-PKG_SOURCE:=$(PKG_NAME).tar.gz
-PKG_SOURCE_URL:=http://www.teest.com/at91
-PKG_MD5SUM:=
-PKG_CAT:=zcat
-
-CRLF_WORKAROUND=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Build/InstallDev
-	dd if=$(PKG_BUILD_DIR)/romboot.bin of=$(PKG_BUILD_DIR)/romboot.block bs=32k count=1 conv=sync
-endef
-
-$(eval $(call Build/DefaultTargets))
diff --git a/target/linux/at91-2.6/image/romboot/patches/000-fixenv.patch b/target/linux/at91-2.6/image/romboot/patches/000-fixenv.patch
deleted file mode 100644
index 7c28572..0000000
--- a/target/linux/at91-2.6/image/romboot/patches/000-fixenv.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-diff -uNr romboot/main.cpp romboot.new/main.cpp
---- romboot/main.cpp	2004-07-16 17:10:04.000000000 +0200
-+++ romboot.new/main.cpp	2006-03-03 02:27:37.000000000 +0100
-@@ -23,12 +23,12 @@
- #define AT91C_UBOOT_DATAFLASH_ADDR 0xC0008000
- 
- // crystal= 18.432MHz
--//#define AT91C_PLLA_VALUE 0x2026BE04 // -> 179.712MHz
--//#define AT91C_PLLA_MCK 0x0000202
-+#define AT91C_PLLA_VALUE 0x2026BE04 // -> 179.712MHz
-+#define AT91C_PLLA_MCK 0x0000202
- 
- // crystal= 20.000MHz
--#define AT91C_PLLA_VALUE 0x2023BE04 // -> 180MHz
--#define AT91C_PLLA_MCK 0x0000202
-+//#define AT91C_PLLA_VALUE 0x2023BE04 // -> 180MHz
-+//#define AT91C_PLLA_MCK 0x0000202
- 
- #define DELAY_MAIN_FREQ	1000
- #define DISP_LINE_LEN 16
-@@ -151,7 +151,7 @@
- //*-----------------------------------------------------------------------------
- void AT91F_DisplayMenu(void)
- {
--  printf("\n\rATMEL LOADER %s %s %s\n\r", AT91C_VERSION, __DATE__, __TIME__);
-+  printf("\n\rFDL LOADER %s %s %s\n\r", AT91C_VERSION, __DATE__, __TIME__);
-   printf(menu_separ);	
-   AT91F_DataflashPrintInfo();
-   printf(menu_separ);	
-@@ -306,6 +306,19 @@
-   AT91F_SetPLL();
- }
- 
-+void LedCode(void)
-+{
-+	int *pRegister;
-+	pRegister = (int *)0xFFFFF800; // Enable port C peripheral reg
-+        *pRegister = 0x3c00;
-+        pRegister = (int *)0xFFFFF810; // Output Enable reg
-+        *pRegister = 0x3c00;
-+        pRegister = (int *)0xFFFFF830; // Set data
-+        *pRegister = 0x1400;
-+        pRegister = (int *)0xFFFFF834; // Clear bits
-+        *pRegister = 0x2800;
-+}
-+
- void AT91F_StartUboot(unsigned int dummy, void *pvoid)
- {
-   printf("Load U-BOOT from dataflash[%x] to SDRAM[%x]\n\r", AT91C_UBOOT_DATAFLASH_ADDR, AT91C_UBOOT_ADDR);
-@@ -313,6 +326,7 @@
-   printf("Set PLLA to 180Mhz and Master clock to 60Mhz and start U-BOOT\n\r");
-   //* Reset registers
-   AT91F_ResetRegisters();
-+  LedCode();
-   Jump(AT91C_UBOOT_ADDR);
-   while(1);
- }
diff --git a/target/linux/at91-2.6/image/romboot/patches/001-makefile.patch b/target/linux/at91-2.6/image/romboot/patches/001-makefile.patch
deleted file mode 100644
index e0995c7..0000000
--- a/target/linux/at91-2.6/image/romboot/patches/001-makefile.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- romboot/Makefile.old	2007-03-18 09:29:20.000000000 +0100
-+++ romboot/Makefile	2007-03-18 09:29:13.000000000 +0100
-@@ -0,0 +1,47 @@
-+LINKFLAGS= -T elf32-littlearm.lds -Ttext 0
-+COMPILEFLAGS= -Os
-+TARGET=romboot
-+OBJFILES=cstartup_ram.o asm_isr.o jump.o at45.o com.o dataflash.o \
-+	init.o main.o stdio.o _udivsi3.o _umodsi3.o div0.o
-+LIBRARIES=
-+INCLUDES= -Iinclude
-+
-+all:$(TARGET)
-+
-+$(TARGET): $(OBJFILES)
-+	$(LD) $(OBJFILES) -o $(TARGET).out $(LINKFLAGS) -n
-+	$(OBJCOPY) $(TARGET).out -O binary $(TARGET).bin
-+
-+asm_isr.o: asm_isr.S
-+	$(CC) -c -Iinclude -o $@ $<
-+
-+cstartup_ram.o: cstartup_ram.S
-+	$(CC) -c -Iinclude -o $@ $<
-+
-+jump.o: jump.S
-+	$(CC) -c -Iinclude -o $@ $<
-+
-+_udivsi3.o: _udivsi3.S
-+	$(CC) -c $<
-+
-+_umodsi3.o: _umodsi3.S
-+	$(CC) -c $<
-+
-+#%.o: %.S
-+#	$(CC) -c $(INCLUDES) -o $@ $<
-+
-+%.o: %.cpp
-+	$(CC) -c $(COMPILEFLAGS) $(INCLUDES) -o $@ $<
-+
-+div0.o: div0.c
-+	$(CC) -c $(COMPILEFLAGS) $<
-+
-+clean:
-+	rm $(OBJFILES) -f
-+	rm *~ -f
-+	rm $(TARGET) -f
-+
-+
-+#LD="$CROSS"ld
-+
-+
diff --git a/target/linux/at91-2.6/image/romboot/patches/002-Add-SD-Card.patch b/target/linux/at91-2.6/image/romboot/patches/002-Add-SD-Card.patch
deleted file mode 100644
index 8ed0db9..0000000
--- a/target/linux/at91-2.6/image/romboot/patches/002-Add-SD-Card.patch
+++ /dev/null
@@ -1,1822 +0,0 @@
-diff -urN romboot.old/asm_mci_isr.S romboot/asm_mci_isr.S
---- romboot.old/asm_mci_isr.S	1970-01-01 01:00:00.000000000 +0100
-+++ romboot/asm_mci_isr.S	2007-03-22 18:52:05.000000000 +0100
-@@ -0,0 +1,75 @@
-+#include <AT91RM9200_inc.h>
-+
-+#define ARM_MODE_USER           0x10
-+#define ARM_MODE_FIQ            0x11
-+#define ARM_MODE_IRQ            0x12
-+#define ARM_MODE_SVC            0x13
-+#define ARM_MODE_ABORT          0x17
-+#define ARM_MODE_UNDEF          0x1B
-+#define ARM_MODE_SYS            0x1F
-+
-+#define I_BIT                   0x80
-+#define F_BIT                   0x40
-+#define T_BIT                   0x20
-+
-+
-+/* -----------------------------------------------------------------------------
-+   AT91F_ASM_MCI_Handler
-+   ---------------------
-+      Handler called by the AIC
-+        
-+      Save context
-+        Call C handler
-+    Restore context
-+   ----------------------------------------------------------------------------- */
-+		
-+.global AT91F_ASM_MCI_Handler  
-+
-+AT91F_ASM_MCI_Handler:
-+/*  Adjust and save LR_irq in IRQ stack */
-+ 	sub         r14, r14, #4
-+	stmfd       sp!, {r14}
-+
-+/*  Write in the IVR to support Protect Mode
-+  No effect in Normal Mode
-+  De-assert the NIRQ and clear the source in Protect Mode */
-+	ldr         r14, =AT91C_BASE_AIC
-+	str         r14, [r14, #AIC_IVR]
-+
-+/*  Save SPSR and r0 in IRQ stack */
-+	mrs         r14, SPSR
-+	stmfd       sp!, {r0, r14}
-+
-+/*  Enable Interrupt and Switch in SYS Mode */
-+	mrs         r0, CPSR
-+	bic         r0, r0, #I_BIT
-+	orr         r0, r0, #ARM_MODE_SYS
-+	msr         CPSR_c, r0
-+ 
-+/* Save scratch/used registers and LR in User Stack */
-+	stmfd       sp!, { r1-r3, r12, r14}
-+
-+	ldr     r1, =AT91F_MCI_Handler
-+	mov     r14, pc
-+	bx      r1
-+
-+/*  Restore scratch/used registers and LR from User Stack */
-+	ldmia       sp!, { r1-r3, r12, r14}
-+
-+/*  Disable Interrupt and switch back in IRQ mode */
-+	mrs         r0, CPSR
-+	bic         r0, r0, #ARM_MODE_SYS
-+	orr         r0, r0, #I_BIT | ARM_MODE_IRQ
-+	msr         CPSR_c, r0
-+
-+/*  Mark the End of Interrupt on the AIC */
-+	ldr         r0, =AT91C_BASE_AIC
-+	str         r0, [r0, #AIC_EOICR]
-+
-+/*  Restore SPSR_irq and r0 from IRQ stack */
-+	ldmia       sp!, {r0, r14}
-+	msr         SPSR_cxsf, r14
-+
-+/*  Restore adjusted  LR_irq from IRQ stack directly in the PC */
-+	ldmia       sp!, {pc}^
-+
-diff -urN romboot.old/compile romboot/compile
---- romboot.old/compile	2004-08-04 18:24:24.000000000 +0200
-+++ romboot/compile	1970-01-01 01:00:00.000000000 +0100
-@@ -1,35 +0,0 @@
--#!/bin/sh
--
--OUTPUT=romboot
--
--CROSS=/space/arm/buildroot/build_arm_nofpu/staging_dir/bin/arm-linux-
--#CROSS=/opt/cross/bin/arm-linux-
--#GCC="$CROSS"gcc
--GCC="$CROSS"gcc-msoft-float
--LD="$CROSS"ld
--OBJCOPY="$CROSS"objcopy
--SIZE="$CROSS"size
--OBJDUMP="$CROSS"objdump
--
--LDFLAGS="-T elf32-littlearm.lds -Ttext 0"
--
--$GCC asm_isr.S -c -Iinclude
--$GCC cstartup_ram.S -c -Iinclude
--$GCC jump.S -c -Iinclude
--$GCC at45.cpp -c -Iinclude -Os
--$GCC com.cpp -c -Iinclude -Os
--$GCC dataflash.cpp -c -Iinclude -Os
--$GCC init.cpp -c -Iinclude -Os
--$GCC main.cpp -c -Iinclude -Os
--$GCC -c stdio.cpp -Os
--$GCC -c _udivsi3.S
--$GCC -c _umodsi3.S
--$GCC -c div0.c -Os
--
--$LD cstartup_ram.o asm_isr.o jump.o at45.o com.o dataflash.o init.o main.o stdio.o _udivsi3.o _umodsi3.o div0.o -o $OUTPUT.out $LDFLAGS -n
--
--$OBJCOPY $OUTPUT.out -O binary $OUTPUT.bin
--
--$OBJDUMP -h -s $OUTPUT.out > $OUTPUT.lss
--
--$SIZE $OUTPUT.out
-diff -urN romboot.old/include/AT91C_MCI_Device.h romboot/include/AT91C_MCI_Device.h
---- romboot.old/include/AT91C_MCI_Device.h	1970-01-01 01:00:00.000000000 +0100
-+++ romboot/include/AT91C_MCI_Device.h	2007-03-22 18:53:51.000000000 +0100
-@@ -0,0 +1,379 @@
-+//*---------------------------------------------------------------------------
-+//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+//*---------------------------------------------------------------------------
-+//* The software is delivered "AS IS" without warranty or condition of any
-+//* kind, either express, implied or statutory. This includes without
-+//* limitation any warranty or condition with respect to merchantability or
-+//* fitness for any particular purpose, or against the infringements of
-+//* intellectual property rights of others.
-+//*---------------------------------------------------------------------------
-+//* File Name           : AT91C_MCI_Device.h
-+//* Object              : Data Flash Atmel Description File
-+//* Translator          :
-+//*
-+//* 1.0 26/11/02 FB		: Creation
-+//*---------------------------------------------------------------------------
-+
-+#ifndef AT91C_MCI_Device_h
-+#define AT91C_MCI_Device_h
-+
-+#include "AT91RM9200.h"
-+#include "lib_AT91RM9200.h"
-+
-+typedef unsigned int AT91S_MCIDeviceStatus;
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+#define AT91C_CARD_REMOVED			0
-+#define AT91C_MMC_CARD_INSERTED		1
-+#define AT91C_SD_CARD_INSERTED		2
-+
-+#define AT91C_NO_ARGUMENT			0x0
-+
-+#define AT91C_FIRST_RCA				0xCAFE
-+#define AT91C_MAX_MCI_CARDS			10
-+
-+#define AT91C_BUS_WIDTH_1BIT		0x00
-+#define AT91C_BUS_WIDTH_4BITS		0x02
-+
-+/* Driver State */
-+#define AT91C_MCI_IDLE       		0x0
-+#define AT91C_MCI_TIMEOUT_ERROR		0x1
-+#define AT91C_MCI_RX_SINGLE_BLOCK	0x2
-+#define AT91C_MCI_RX_MULTIPLE_BLOCK	0x3
-+#define AT91C_MCI_RX_STREAM			0x4
-+#define AT91C_MCI_TX_SINGLE_BLOCK	0x5
-+#define AT91C_MCI_TX_MULTIPLE_BLOCK	0x6
-+#define AT91C_MCI_TX_STREAM 		0x7
-+
-+/* TimeOut */
-+#define AT91C_TIMEOUT_CMDRDY		30
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+// MMC & SDCard Structures 
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+/*-----------------------------------------------*/
-+/* SDCard Device Descriptor Structure Definition */
-+/*-----------------------------------------------*/
-+typedef struct	_AT91S_MciDeviceDesc
-+{
-+    volatile unsigned char	state;
-+	unsigned char			SDCard_bus_width;
-+
-+} AT91S_MciDeviceDesc, *AT91PS_MciDeviceDesc;
-+
-+/*---------------------------------------------*/
-+/* MMC & SDCard Structure Device Features	   */
-+/*---------------------------------------------*/
-+typedef struct	_AT91S_MciDeviceFeatures
-+{
-+    unsigned char	Card_Inserted;				// (0=AT91C_CARD_REMOVED) (1=AT91C_MMC_CARD_INSERTED) (2=AT91C_SD_CARD_INSERTED)
-+    unsigned int 	Relative_Card_Address;		// RCA
-+	unsigned int 	Max_Read_DataBlock_Length;	// 2^(READ_BL_LEN) in CSD 
-+	unsigned int 	Max_Write_DataBlock_Length;	// 2^(WRITE_BL_LEN) in CSD
-+	unsigned char	Read_Partial;				// READ_BL_PARTIAL
-+	unsigned char	Write_Partial;				// WRITE_BL_PARTIAL
-+	unsigned char	Erase_Block_Enable;			// ERASE_BLK_EN
-+	unsigned char	Read_Block_Misalignment;	// READ_BLK_MISALIGN
-+	unsigned char	Write_Block_Misalignment;	// WRITE_BLK_MISALIGN
-+	unsigned char	Sector_Size;				// SECTOR_SIZE
-+	unsigned int	Memory_Capacity;			// Size in bits of the device
-+	
-+}	AT91S_MciDeviceFeatures, *AT91PS_MciDeviceFeatures ;
-+
-+/*---------------------------------------------*/
-+/* MCI Device Structure Definition 			   */
-+/*---------------------------------------------*/
-+typedef struct _AT91S_MciDevice
-+{
-+	AT91PS_MciDeviceDesc		 	pMCI_DeviceDesc;	// MCI device descriptor
-+	AT91PS_MciDeviceFeatures		pMCI_DeviceFeatures;// Pointer on a MCI device features array  
-+}AT91S_MciDevice, *AT91PS_MciDevice;
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+// MCI_CMD Register Value 
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+#define AT91C_POWER_ON_INIT						(0	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_INIT | AT91C_MCI_OPDCMD)
-+
-+/////////////////////////////////////////////////////////////////	
-+// Class 0 & 1 commands: Basic commands and Read Stream commands
-+/////////////////////////////////////////////////////////////////
-+
-+#define AT91C_GO_IDLE_STATE_CMD					(0 	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE )
-+#define AT91C_MMC_GO_IDLE_STATE_CMD				(0 	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE  | AT91C_MCI_OPDCMD)
-+#define AT91C_MMC_SEND_OP_COND_CMD				(1	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 | AT91C_MCI_OPDCMD)
-+#define AT91C_ALL_SEND_CID_CMD					(2	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_136 )
-+#define AT91C_MMC_ALL_SEND_CID_CMD				(2	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_136 | AT91C_MCI_OPDCMD)
-+#define AT91C_SET_RELATIVE_ADDR_CMD				(3	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48		| AT91C_MCI_MAXLAT )
-+#define AT91C_MMC_SET_RELATIVE_ADDR_CMD			(3	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48		| AT91C_MCI_MAXLAT | AT91C_MCI_OPDCMD)
-+
-+#define AT91C_SET_DSR_CMD						(4	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_NO		| AT91C_MCI_MAXLAT )	// no tested
-+
-+#define AT91C_SEL_DESEL_CARD_CMD				(7	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48  		| AT91C_MCI_MAXLAT )
-+#define AT91C_SEND_CSD_CMD						(9	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_136 		| AT91C_MCI_MAXLAT )
-+#define AT91C_SEND_CID_CMD						(10	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_136 		| AT91C_MCI_MAXLAT )
-+#define AT91C_MMC_READ_DAT_UNTIL_STOP_CMD		(11	| AT91C_MCI_TRTYP_STREAM| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRDIR	| AT91C_MCI_TRCMD_START | AT91C_MCI_MAXLAT )
-+
-+#define AT91C_STOP_TRANSMISSION_CMD				(12	| AT91C_MCI_TRCMD_STOP 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 		| AT91C_MCI_MAXLAT )
-+#define AT91C_STOP_TRANSMISSION_SYNC_CMD		(12	| AT91C_MCI_TRCMD_STOP 	| AT91C_MCI_SPCMD_SYNC	| AT91C_MCI_RSPTYP_48 		| AT91C_MCI_MAXLAT )
-+#define AT91C_SEND_STATUS_CMD					(13	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 		| AT91C_MCI_MAXLAT )
-+#define AT91C_GO_INACTIVE_STATE_CMD				(15	| AT91C_MCI_RSPTYP_NO )
-+
-+//*------------------------------------------------
-+//* Class 2 commands: Block oriented Read commands
-+//*------------------------------------------------
-+
-+#define AT91C_SET_BLOCKLEN_CMD					(16 | AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48		| AT91C_MCI_MAXLAT )
-+#define AT91C_READ_SINGLE_BLOCK_CMD				(17 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 	| AT91C_MCI_TRCMD_START	| AT91C_MCI_TRTYP_BLOCK	| AT91C_MCI_TRDIR	| AT91C_MCI_MAXLAT)
-+#define AT91C_READ_MULTIPLE_BLOCK_CMD			(18 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 	| AT91C_MCI_TRCMD_START	| AT91C_MCI_TRTYP_MULTIPLE	| AT91C_MCI_TRDIR	| AT91C_MCI_MAXLAT)
-+
-+//*--------------------------------------------
-+//* Class 3 commands: Sequential write commands
-+//*--------------------------------------------
-+
-+#define AT91C_MMC_WRITE_DAT_UNTIL_STOP_CMD		(20 | AT91C_MCI_TRTYP_STREAM| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 & ~(AT91C_MCI_TRDIR) | AT91C_MCI_TRCMD_START | AT91C_MCI_MAXLAT )	// MMC
-+
-+//*------------------------------------------------
-+//* Class 4 commands: Block oriented write commands
-+//*------------------------------------------------
-+	
-+#define AT91C_WRITE_BLOCK_CMD					(24 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_START	| (AT91C_MCI_TRTYP_BLOCK 	&  ~(AT91C_MCI_TRDIR))	| AT91C_MCI_MAXLAT)
-+#define AT91C_WRITE_MULTIPLE_BLOCK_CMD			(25 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_START	| (AT91C_MCI_TRTYP_MULTIPLE	&  ~(AT91C_MCI_TRDIR)) 	| AT91C_MCI_MAXLAT)
-+#define AT91C_PROGRAM_CSD_CMD					(27 | AT91C_MCI_RSPTYP_48 )
-+
-+
-+//*----------------------------------------
-+//* Class 6 commands: Group Write protect
-+//*----------------------------------------
-+
-+#define AT91C_SET_WRITE_PROT_CMD				(28	| AT91C_MCI_RSPTYP_48 )
-+#define AT91C_CLR_WRITE_PROT_CMD				(29	| AT91C_MCI_RSPTYP_48 )
-+#define AT91C_SEND_WRITE_PROT_CMD				(30	| AT91C_MCI_RSPTYP_48 )
-+
-+
-+//*----------------------------------------
-+//* Class 5 commands: Erase commands
-+//*----------------------------------------
-+
-+#define AT91C_TAG_SECTOR_START_CMD				(32 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
-+#define AT91C_TAG_SECTOR_END_CMD  				(33 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
-+#define AT91C_MMC_UNTAG_SECTOR_CMD				(34 | AT91C_MCI_RSPTYP_48 )
-+#define AT91C_MMC_TAG_ERASE_GROUP_START_CMD		(35 | AT91C_MCI_RSPTYP_48 )
-+#define AT91C_MMC_TAG_ERASE_GROUP_END_CMD		(36 | AT91C_MCI_RSPTYP_48 )
-+#define AT91C_MMC_UNTAG_ERASE_GROUP_CMD			(37 | AT91C_MCI_RSPTYP_48 )
-+#define AT91C_ERASE_CMD							(38 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT )
-+
-+//*----------------------------------------
-+//* Class 7 commands: Lock commands
-+//*----------------------------------------
-+
-+#define AT91C_LOCK_UNLOCK						(42 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)	// no tested
-+
-+//*-----------------------------------------------
-+// Class 8 commands: Application specific commands
-+//*-----------------------------------------------
-+
-+#define AT91C_APP_CMD							(55 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT)
-+#define AT91C_GEN_CMD							(56 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT)	// no tested
-+
-+#define AT91C_SDCARD_SET_BUS_WIDTH_CMD			(6 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
-+#define AT91C_SDCARD_STATUS_CMD					(13 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
-+#define AT91C_SDCARD_SEND_NUM_WR_BLOCKS_CMD		(22 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
-+#define AT91C_SDCARD_SET_WR_BLK_ERASE_COUNT_CMD	(23 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
-+#define AT91C_SDCARD_APP_OP_COND_CMD			(41 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO )
-+#define AT91C_SDCARD_SET_CLR_CARD_DETECT_CMD	(42 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
-+#define AT91C_SDCARD_SEND_SCR_CMD				(51 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
-+
-+#define AT91C_SDCARD_APP_ALL_CMD				(AT91C_SDCARD_SET_BUS_WIDTH_CMD +\
-+												AT91C_SDCARD_STATUS_CMD +\
-+												AT91C_SDCARD_SEND_NUM_WR_BLOCKS_CMD +\
-+												AT91C_SDCARD_SET_WR_BLK_ERASE_COUNT_CMD +\
-+												AT91C_SDCARD_APP_OP_COND_CMD +\
-+												AT91C_SDCARD_SET_CLR_CARD_DETECT_CMD +\
-+												AT91C_SDCARD_SEND_SCR_CMD)
-+
-+//*----------------------------------------
-+//* Class 9 commands: IO Mode commands
-+//*----------------------------------------
-+
-+#define AT91C_MMC_FAST_IO_CMD					(39 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT)
-+#define AT91C_MMC_GO_IRQ_STATE_CMD				(40 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+// Functions returnals
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+#define AT91C_CMD_SEND_OK					0		// Command ok
-+#define AT91C_CMD_SEND_ERROR				-1		// Command failed
-+#define AT91C_INIT_OK						2		// Init Successfull
-+#define AT91C_INIT_ERROR					3		// Init Failed
-+#define AT91C_READ_OK						4		// Read Successfull
-+#define AT91C_READ_ERROR					5		// Read Failed
-+#define AT91C_WRITE_OK						6		// Write Successfull
-+#define AT91C_WRITE_ERROR					7		// Write Failed
-+#define AT91C_ERASE_OK						8		// Erase Successfull
-+#define AT91C_ERASE_ERROR					9		// Erase Failed
-+#define AT91C_CARD_SELECTED_OK				10		// Card Selection Successfull
-+#define AT91C_CARD_SELECTED_ERROR			11		// Card Selection Failed
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+// MCI_SR Errors
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+#define 	AT91C_MCI_SR_ERROR		(AT91C_MCI_UNRE |\
-+									 AT91C_MCI_OVRE |\
-+									 AT91C_MCI_DTOE |\
-+									 AT91C_MCI_DCRCE |\
-+									 AT91C_MCI_RTOE |\
-+									 AT91C_MCI_RENDE |\
-+									 AT91C_MCI_RCRCE |\
-+									 AT91C_MCI_RDIRE |\
-+									 AT91C_MCI_RINDE)
-+
-+////////////////////////////////////////////////////////////////////////////////////////////////////
-+// OCR Register
-+////////////////////////////////////////////////////////////////////////////////////////////////////
-+#define AT91C_VDD_16_17					(1 << 4)
-+#define AT91C_VDD_17_18					(1 << 5)
-+#define AT91C_VDD_18_19					(1 << 6)
-+#define AT91C_VDD_19_20					(1 << 7)
-+#define AT91C_VDD_20_21					(1 << 8)
-+#define AT91C_VDD_21_22					(1 << 9)
-+#define AT91C_VDD_22_23					(1 << 10)
-+#define AT91C_VDD_23_24					(1 << 11)
-+#define AT91C_VDD_24_25					(1 << 12)
-+#define AT91C_VDD_25_26					(1 << 13)
-+#define AT91C_VDD_26_27					(1 << 14)
-+#define AT91C_VDD_27_28					(1 << 15)
-+#define AT91C_VDD_28_29					(1 << 16)
-+#define AT91C_VDD_29_30					(1 << 17)
-+#define AT91C_VDD_30_31					(1 << 18)
-+#define AT91C_VDD_31_32					(1 << 19)
-+#define AT91C_VDD_32_33					(1 << 20)
-+#define AT91C_VDD_33_34					(1 << 21)
-+#define AT91C_VDD_34_35					(1 << 22)
-+#define AT91C_VDD_35_36					(1 << 23)
-+#define AT91C_CARD_POWER_UP_BUSY		(1 << 31)
-+
-+#define AT91C_MMC_HOST_VOLTAGE_RANGE	(AT91C_VDD_27_28 +\
-+										AT91C_VDD_28_29 +\
-+										AT91C_VDD_29_30 +\
-+										AT91C_VDD_30_31 +\
-+										AT91C_VDD_31_32 +\
-+										AT91C_VDD_32_33)
-+
-+////////////////////////////////////////////////////////////////////////////////////////////////////
-+// CURRENT_STATE & READY_FOR_DATA in SDCard Status Register definition (response type R1)
-+////////////////////////////////////////////////////////////////////////////////////////////////////
-+#define AT91C_SR_READY_FOR_DATA				(1 << 8)	// corresponds to buffer empty signalling on the bus
-+#define AT91C_SR_IDLE						(0 << 9)
-+#define AT91C_SR_READY						(1 << 9)
-+#define AT91C_SR_IDENT						(2 << 9)
-+#define AT91C_SR_STBY						(3 << 9)
-+#define AT91C_SR_TRAN						(4 << 9)
-+#define AT91C_SR_DATA						(5 << 9)
-+#define AT91C_SR_RCV						(6 << 9)
-+#define AT91C_SR_PRG						(7 << 9)
-+#define AT91C_SR_DIS						(8 << 9)
-+
-+#define AT91C_SR_CARD_SELECTED				(AT91C_SR_READY_FOR_DATA + AT91C_SR_TRAN)
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+// MMC CSD register header File					
-+// AT91C_CSD_xxx_S	for shift value
-+// AT91C_CSD_xxx_M	for mask  value
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+// First Response INT <=> CSD[3] : bits 0 to 31
-+#define	AT91C_CSD_BIT0_S			0		// [0:0]			
-+#define	AT91C_CSD_BIT0_M			0x01				
-+#define	AT91C_CSD_CRC_S				1		// [7:1]
-+#define	AT91C_CSD_CRC_M				0x7F
-+#define	AT91C_CSD_MMC_ECC_S			8		// [9:8]		reserved for MMC compatibility
-+#define	AT91C_CSD_MMC_ECC_M			0x03
-+#define	AT91C_CSD_FILE_FMT_S		10		// [11:10]
-+#define	AT91C_CSD_FILE_FMT_M		0x03
-+#define	AT91C_CSD_TMP_WP_S			12		// [12:12]
-+#define	AT91C_CSD_TMP_WP_M			0x01
-+#define	AT91C_CSD_PERM_WP_S 		13		// [13:13]
-+#define	AT91C_CSD_PERM_WP_M 		0x01
-+#define	AT91C_CSD_COPY_S	 		14		// [14:14]
-+#define	AT91C_CSD_COPY_M 			0x01
-+#define	AT91C_CSD_FILE_FMT_GRP_S	15		// [15:15]
-+#define	AT91C_CSD_FILE_FMT_GRP_M	0x01
-+//	reserved						16		// [20:16]
-+//	reserved						0x1F
-+#define	AT91C_CSD_WBLOCK_P_S 		21		// [21:21]
-+#define	AT91C_CSD_WBLOCK_P_M 		0x01
-+#define	AT91C_CSD_WBLEN_S 			22		// [25:22]
-+#define	AT91C_CSD_WBLEN_M 			0x0F
-+#define	AT91C_CSD_R2W_F_S 			26		// [28:26]
-+#define	AT91C_CSD_R2W_F_M 			0x07
-+#define	AT91C_CSD_MMC_DEF_ECC_S		29		// [30:29]		reserved for MMC compatibility
-+#define	AT91C_CSD_MMC_DEF_ECC_M		0x03
-+#define	AT91C_CSD_WP_GRP_EN_S		31		// [31:31]
-+#define	AT91C_CSD_WP_GRP_EN_M 		0x01
-+
-+// Seconde Response INT <=> CSD[2] : bits 32 to 63
-+#define	AT91C_CSD_v21_WP_GRP_SIZE_S	0		// [38:32]				
-+#define	AT91C_CSD_v21_WP_GRP_SIZE_M	0x7F				
-+#define	AT91C_CSD_v21_SECT_SIZE_S	7		// [45:39]
-+#define	AT91C_CSD_v21_SECT_SIZE_M	0x7F
-+#define	AT91C_CSD_v21_ER_BLEN_EN_S	14		// [46:46]
-+#define	AT91C_CSD_v21_ER_BLEN_EN_M	0x01
-+
-+#define	AT91C_CSD_v22_WP_GRP_SIZE_S	0		// [36:32]				
-+#define	AT91C_CSD_v22_WP_GRP_SIZE_M	0x1F				
-+#define	AT91C_CSD_v22_ER_GRP_SIZE_S	5		// [41:37]
-+#define	AT91C_CSD_v22_ER_GRP_SIZE_M	0x1F
-+#define	AT91C_CSD_v22_SECT_SIZE_S	10		// [46:42]
-+#define	AT91C_CSD_v22_SECT_SIZE_M	0x1F
-+
-+#define	AT91C_CSD_C_SIZE_M_S		15		// [49:47]
-+#define	AT91C_CSD_C_SIZE_M_M		0x07
-+#define	AT91C_CSD_VDD_WMAX_S 		18		// [52:50]
-+#define	AT91C_CSD_VDD_WMAX_M 		0x07
-+#define	AT91C_CSD_VDD_WMIN_S	 	21		// [55:53]
-+#define	AT91C_CSD_VDD_WMIN_M 		0x07
-+#define	AT91C_CSD_RCUR_MAX_S 		24		// [58:56]
-+#define	AT91C_CSD_RCUR_MAX_M 		0x07
-+#define	AT91C_CSD_RCUR_MIN_S 		27		// [61:59]
-+#define	AT91C_CSD_RCUR_MIN_M 		0x07
-+#define	AT91C_CSD_CSIZE_L_S 		30		// [63:62] <=> 2 LSB of CSIZE
-+#define	AT91C_CSD_CSIZE_L_M 		0x03
-+
-+// Third Response INT <=> CSD[1] : bits 64 to 95
-+#define	AT91C_CSD_CSIZE_H_S 		0		// [73:64]	<=> 10 MSB of CSIZE
-+#define	AT91C_CSD_CSIZE_H_M 		0x03FF
-+// reserved							10		// [75:74]
-+// reserved							0x03		
-+#define	AT91C_CSD_DSR_I_S 			12		// [76:76]
-+#define	AT91C_CSD_DSR_I_M 			0x01
-+#define	AT91C_CSD_RD_B_MIS_S 		13		// [77:77]
-+#define	AT91C_CSD_RD_B_MIS_M 		0x01
-+#define	AT91C_CSD_WR_B_MIS_S 		14		// [78:78]
-+#define	AT91C_CSD_WR_B_MIS_M 		0x01
-+#define	AT91C_CSD_RD_B_PAR_S 		15		// [79:79]
-+#define	AT91C_CSD_RD_B_PAR_M 		0x01
-+#define	AT91C_CSD_RD_B_LEN_S 		16		// [83:80]
-+#define	AT91C_CSD_RD_B_LEN_M 		0x0F
-+#define	AT91C_CSD_CCC_S	 			20		// [95:84]
-+#define	AT91C_CSD_CCC_M 			0x0FFF
-+
-+// Fourth Response INT <=> CSD[0] : bits 96 to 127
-+#define	AT91C_CSD_TRANS_SPEED_S 	0		// [103:96]
-+#define	AT91C_CSD_TRANS_SPEED_M 	0xFF
-+#define	AT91C_CSD_NSAC_S 			8		// [111:104]
-+#define	AT91C_CSD_NSAC_M 			0xFF
-+#define	AT91C_CSD_TAAC_S 			16		// [119:112]
-+#define	AT91C_CSD_TAAC_M 			0xFF
-+//	reserved						24		// [121:120]
-+//	reserved						0x03
-+#define	AT91C_CSD_MMC_SPEC_VERS_S	26		// [125:122]	reserved for MMC compatibility
-+#define	AT91C_CSD_MMC_SPEC_VERS_M	0x0F
-+#define	AT91C_CSD_STRUCT_S			30		// [127:126]
-+#define	AT91C_CSD_STRUCT_M 			0x03
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+#endif
-+
-diff -urN romboot.old/init.cpp romboot/init.cpp
---- romboot.old/init.cpp	2004-07-06 13:01:55.000000000 +0200
-+++ romboot/init.cpp	2007-03-21 12:43:39.000000000 +0100
-@@ -35,7 +35,7 @@
- //*----------------------------------------------------------------------------
- void AT91F_SpuriousHandler() 
- {
--	AT91F_DBGU_Printk("-F- Spurious Interrupt detected\n\r");
-+	AT91F_DBGU_Printk("ISI");
- 	while (1);
- }
- 
-@@ -46,7 +46,7 @@
- //*----------------------------------------------------------------------------
- void AT91F_DataAbort() 
- {
--	AT91F_DBGU_Printk("-F- Data Abort detected\n\r");
-+	AT91F_DBGU_Printk("IDA");
- 	while (1);
- }
- 
-@@ -56,7 +56,7 @@
- //*----------------------------------------------------------------------------
- void AT91F_FetchAbort()
- {
--	AT91F_DBGU_Printk("-F- Prefetch Abort detected\n\r");
-+	AT91F_DBGU_Printk("IPA");
- 	while (1);
- }
- 
-@@ -66,7 +66,7 @@
- //*----------------------------------------------------------------------------
- void AT91F_Undef() 
- {
--	AT91F_DBGU_Printk("-F- Undef detected\n\r");
-+	AT91F_DBGU_Printk("IUD");
- 	while (1);
- }
- 
-@@ -76,7 +76,7 @@
- //*----------------------------------------------------------------------------
- void AT91F_UndefHandler() 
- {
--	AT91F_DBGU_Printk("-F- Undef detected\n\r");
-+	AT91F_DBGU_Printk("IUD");
- 	while (1);
- }
- 
-diff -urN romboot.old/main.cpp romboot/main.cpp
---- romboot.old/main.cpp	2007-03-19 12:44:03.000000000 +0100
-+++ romboot/main.cpp	2007-03-21 19:23:41.000000000 +0100
-@@ -33,18 +33,22 @@
- #define DELAY_MAIN_FREQ	1000
- #define DISP_LINE_LEN 16
- 
-+#define COMPACT 1
-+
- //* prototypes
- extern void AT91F_DBGU_Printk(char *);
- extern "C" void AT91F_ST_ASM_Handler(void);
- extern "C" void Jump(unsigned int addr);
-+extern int mci_main(void);
- 
--const char *menu_separ = "*----------------------------------------*\n\r";
-+//const char *menu_separ = "*----------------------------------------*\n\r";
- 
- const char *menu_dataflash = {
--  "1: Download Dataflash [addr]\n\r"
--  "2: Read Dataflash [addr]\n\r"
--  "3: Start U-BOOT\n\r"
--  "4: Clear bootloader section in Dataflash\n\r"
-+  "1: DL DF [ad]\n\r"
-+  "2: RD DF [ad]\n\r"
-+	"3: CP SD\n\r"
-+  "4: U-BOOT\n\r"
-+  "5: RM BL in DF\n\r"
- };
- 
- //* Globales variables 
-@@ -151,12 +155,12 @@
- //*-----------------------------------------------------------------------------
- void AT91F_DisplayMenu(void)
- {
--  printf("\n\rFDL LOADER %s %s %s\n\r", AT91C_VERSION, __DATE__, __TIME__);
--  printf(menu_separ);	
-+  printf("\n\rFDL SD-Card LOADER %s %s %s\n\r", AT91C_VERSION, __DATE__, __TIME__);
-+//  printf(menu_separ);	
-   AT91F_DataflashPrintInfo();
--  printf(menu_separ);	
-+//  printf(menu_separ);	
-   printf(menu_dataflash);			
--  printf(menu_separ);	
-+//  printf(menu_separ);	
- }	
- 
- //*-----------------------------------------------------------------------------
-@@ -194,6 +198,7 @@
- }
- 
- 
-+#ifndef COMPACT
- //*-----------------------------------------------------------------------------
- //* Function Name       : AT91F_MemoryDisplay()
- //* Object              : Display the content of the dataflash
-@@ -244,7 +249,7 @@
-     } while (nbytes > 0);
-   return 0;
- }
--
-+#endif
- 
- //*--------------------------------------------------------------------------------------
- //* Function Name       : AT91F_SetPLL
-@@ -306,7 +311,7 @@
-   AT91F_SetPLL();
- }
- 
--void LedCode(void)
-+/*void LedCode(void)
- {
- 	int *pRegister;
- 	pRegister = (int *)0xFFFFF800; // Enable port C peripheral reg
-@@ -318,15 +323,16 @@
-         pRegister = (int *)0xFFFFF834; // Clear bits
-         *pRegister = 0x2800;
- }
-+*/
- 
- void AT91F_StartUboot(unsigned int dummy, void *pvoid)
- {
--  printf("Load U-BOOT from dataflash[%x] to SDRAM[%x]\n\r", AT91C_UBOOT_DATAFLASH_ADDR, AT91C_UBOOT_ADDR);
-+  //printf("Load U-BOOT from dataflash[%x] to SDRAM[%x]\n\r", AT91C_UBOOT_DATAFLASH_ADDR, AT91C_UBOOT_ADDR);
-   read_dataflash(AT91C_UBOOT_DATAFLASH_ADDR, AT91C_UBOOT_SIZE, (char *)(AT91C_UBOOT_ADDR));
--  printf("Set PLLA to 180Mhz and Master clock to 60Mhz and start U-BOOT\n\r");
-+  //printf("Set PLLA to 180Mhz and Master clock to 60Mhz and start U-BOOT\n\r");
-   //* Reset registers
-   AT91F_ResetRegisters();
--  LedCode();
-+//  LedCode();
-   Jump(AT91C_UBOOT_ADDR);
-   while(1);
- }
-@@ -385,120 +391,124 @@
-   // start tempo to start Uboot in a delay of 1 sec if no key pressed
-   svcUbootTempo.Start(&svcUbootTempo, 1000, 0, AT91F_StartUboot, (void *)0);
- 
--  printf("press any key to enter bootloader\n\r");
-+  printf("press key\n\r");
-   getc();
- 
-   // stop tempo
-   svcUbootTempo.Stop(&svcUbootTempo);
-   
--  while(1)
--    {
--      while(command == 0)
--	{
--	  AddressToDownload = AT91C_DOWNLOAD_BASE_ADDRESS;
--	  SizeToDownload = AT91C_DOWNLOAD_MAX_SIZE;
--	  DeviceAddress = 0;
-+	while(1) {
-+		while(command == 0) {
-+	 		AddressToDownload = AT91C_DOWNLOAD_BASE_ADDRESS;
-+	 		SizeToDownload = AT91C_DOWNLOAD_MAX_SIZE;
-+	 		DeviceAddress = 0;
- 	  
--	  AT91F_DisplayMenu();
--	  message[0] = 0;
--	  message[2] = 0;
--	  AT91F_ReadLine("Enter: ", message);
-+	 		AT91F_DisplayMenu();
-+	 		message[0] = 0;
-+	 		message[2] = 0;
-+	 		AT91F_ReadLine("Enter: ", message);
- 	  
--	  command = message[0];
--	  if(command == '1' || command == '2')
--	    if(AsciiToHex(&message[2], &DeviceAddress) == 0)
--	      command = 0;
--
--	  switch(command)
--	    {
--	    case '1':					
--	      printf("Download Dataflash [0x%x]\n\r", DeviceAddress);
--	      
--	      switch(DeviceAddress & 0xFF000000)
--		{
--		case CFG_DATAFLASH_LOGIC_ADDR_CS0:
--		  device = 0;
--		  break;
-+	 		command = message[0];
-+	 		if(command == '1' || command == '2')
-+	   		if(AsciiToHex(&message[2], &DeviceAddress) == 0)
-+	     		command = 0;
-+
-+	 		switch(command) {
-+	   		case '1':					
-+	     		printf("DL DF [0x%x]\n\r", DeviceAddress);
-+
-+      		switch(DeviceAddress & 0xFF000000) {
-+						case CFG_DATAFLASH_LOGIC_ADDR_CS0:
-+	  					device = 0;
-+	  					break;
- 		  
--		case CFG_DATAFLASH_LOGIC_ADDR_CS3:
--		  device = 1;
--		  break;
-+						case CFG_DATAFLASH_LOGIC_ADDR_CS3:
-+	  					device = 1;
-+	  					break;
- 		  
--		default:
--		  command = 0;
--		  break;
--		}
--	      break;
--	      
--	    case '2':
--	      do 
--		{
--		  AT91F_MemoryDisplay(DeviceAddress, 4, 64);
--		  AT91F_ReadLine ((char *)0, message);
--		  DeviceAddress += 0x100;
-+						default:
-+	  					command = 0;
-+	  					break;
-+						}
-+      		break;
-+
-+#ifndef COMPACT
-+    		case '2':
-+      		do {
-+	  				AT91F_MemoryDisplay(DeviceAddress, 4, 64);
-+	  				AT91F_ReadLine ((char *)0, message);
-+	  				DeviceAddress += 0x100;
-+					} while(message[0] == '\0');
-+      		command = 0;
-+      		break;
-+#endif
-+	
-+				case '3':
-+					mci_main();
-+					command=0;
-+					break;
-+
-+    		case '4':
-+      		AT91F_StartUboot(0, (void *)0);
-+      		command = 0;
-+      		break;
-+
-+    		case '5':
-+      		{
-+					int *i;
-+	
-+					for(i = (int *)0x20000000; i < (int *)0x20004000; i++)
-+	  				*i = 0;
-+      		}
-+      		write_dataflash(0xc0000000, 0x20000000, 0x4000);
-+      		printf("BL CLR\r\n");
-+      		command = 0;
-+      		break;
-+	    
-+				default:
-+      		command = 0;
-+      		break;
-+    		} // switch(command)
-+			} // while(command == 0)
-+      
-+		xmodemPipe.Read(&xmodemPipe, (char *)AddressToDownload, SizeToDownload, XmodemProtocol, 0);	
-+		while(XmodemComplete !=1);
-+		SizeToDownload = (unsigned int)(svcXmodem.pData) - (unsigned int)AddressToDownload;	
-+      
-+		// Modification of vector 6
-+		NbPage = 0;
-+		i = dataflash_info[device].Device.pages_number;
-+		while(i >>= 1)
-+			NbPage++;
-+		i = (SizeToDownload / 512) + 1 + (NbPage << 13) + (dataflash_info[device].Device.pages_size << 17);
-+		*(int *)(AddressToDownload + AT91C_OFFSET_VECT6) = i;
-+      
-+//		printf("\n\rModification of Arm Vector 6 :%x\n\r", i);
-+
-+		printf("\n\rWR %d in DF [0x%x]\n\r",SizeToDownload, DeviceAddress);
-+		crc1 = 0;
-+		pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc1);
-+
-+		// write the dataflash
-+		write_dataflash (DeviceAddress, AddressToDownload, SizeToDownload);
-+		// clear the buffer before read
-+		for(i=0; i < SizeToDownload; i++)
-+			*(unsigned char *)(AddressToDownload + i) = 0;
-+      
-+		//* Read dataflash page in TestBuffer
-+		read_dataflash (DeviceAddress, SizeToDownload, (char *)(AddressToDownload));
-+
-+		printf("Vfy DF: ");	
-+		crc2 = 0;
-+
-+		pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc2);
-+		if (crc1 != crc2)
-+			printf("Fail\r\n");	
-+		else
-+			printf("OK\r\n");	
-+      
-+		command = 0;
-+		XmodemComplete = 0;
-+		AT91F_WaitKeyPressed();
- 		}
--	      while(message[0] == '\0');
--	      command = 0;
--	      break;
--	      
--	    case '3':
--	      AT91F_StartUboot(0, (void *)0);
--	      command = 0;
--	      break;
--	    case '4':
--	      {
--		int *i;
--		for(i = (int *)0x20000000; i < (int *)0x20004000; i++)
--		  *i = 0;
--	      }
--	      write_dataflash(0xc0000000, 0x20000000, 0x4000);
--	      printf("Bootsection cleared\r\n");
--	      command = 0;
--	      break;
--	    default:
--	      command = 0;
--	      break;
--	    }
- 	}
--      
--      xmodemPipe.Read(&xmodemPipe, (char *)AddressToDownload, SizeToDownload, XmodemProtocol, 0);	
--      while(XmodemComplete !=1);
--      SizeToDownload = (unsigned int)(svcXmodem.pData) - (unsigned int)AddressToDownload;	
--      
--      // Modification of vector 6
--      NbPage = 0;
--      i = dataflash_info[device].Device.pages_number;
--      while(i >>= 1)
--	NbPage++;
--      i = (SizeToDownload / 512) + 1 + (NbPage << 13) + (dataflash_info[device].Device.pages_size << 17);
--      *(int *)(AddressToDownload + AT91C_OFFSET_VECT6) = i;
--      
--      printf("\n\rModification of Arm Vector 6 :%x\n\r", i);
--      
--      printf("\n\rWrite %d bytes in DataFlash [0x%x]\n\r",SizeToDownload, DeviceAddress);
--      crc1 = 0;
--      pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc1);
--      
--      // write the dataflash
--      write_dataflash (DeviceAddress, AddressToDownload, SizeToDownload);
--      // clear the buffer before read
--      for(i=0; i < SizeToDownload; i++)
--	*(unsigned char *)(AddressToDownload + i) = 0;
--      
--      //* Read dataflash page in TestBuffer
--      read_dataflash (DeviceAddress, SizeToDownload, (char *)(AddressToDownload));
--      
--      printf("Verify Dataflash: ");	
--      crc2 = 0;
--      
--      pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc2);
--      if (crc1 != crc2)
--	printf("Failed\r\n");	
--      else
--	printf("OK\r\n");	
--      
--      command = 0;
--      XmodemComplete = 0;
--      AT91F_WaitKeyPressed();
--    }
--}
-diff -urN romboot.old/main.h romboot/main.h
---- romboot.old/main.h	2004-07-03 17:41:14.000000000 +0200
-+++ romboot/main.h	2007-03-21 21:48:52.000000000 +0100
-@@ -27,7 +27,7 @@
- 
- #define AT91C_OFFSET_VECT6              0x14        //* Offset for ARM vector 6
- 
--#define AT91C_VERSION   "VER 1.01"
-+#define AT91C_VERSION   "VER 1.02"
- // Global variables and functions definition
- extern unsigned int GetTickCount(void);
- #endif
-diff -urN romboot.old/Makefile romboot/Makefile
---- romboot.old/Makefile	2007-03-19 12:44:03.000000000 +0100
-+++ romboot/Makefile	2007-03-21 12:29:11.000000000 +0100
-@@ -1,8 +1,8 @@
- LINKFLAGS= -T elf32-littlearm.lds -Ttext 0
- COMPILEFLAGS= -Os
- TARGET=romboot
--OBJFILES=cstartup_ram.o asm_isr.o jump.o at45.o com.o dataflash.o \
--	init.o main.o stdio.o _udivsi3.o _umodsi3.o div0.o
-+OBJFILES=cstartup_ram.o asm_isr.o asm_mci_isr.o jump.o at45.o com.o dataflash.o \
-+	mci_device.o mci_main.o init.o main.o stdio.o _udivsi3.o _umodsi3.o div0.o
- LIBRARIES=
- INCLUDES= -Iinclude
- 
-@@ -11,10 +11,15 @@
- $(TARGET): $(OBJFILES)
- 	$(LD) $(OBJFILES) -o $(TARGET).out $(LINKFLAGS) -n
- 	$(OBJCOPY) $(TARGET).out -O binary $(TARGET).bin
-+	$(OBJDUMP) -h -s $(TARGET).out > $(TARGET).lss
-+	$(NM) -n $(TARGET).out | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $(TARGET).map
- 
- asm_isr.o: asm_isr.S
- 	$(CC) -c -Iinclude -o $@ $<
- 
-+asm_mci_isr.o: asm_mci_isr.S
-+	$(CC) -c -Iinclude -o $@ $<
-+
- cstartup_ram.o: cstartup_ram.S
- 	$(CC) -c -Iinclude -o $@ $<
- 
-diff -urN romboot.old/mci_device.cpp romboot/mci_device.cpp
---- romboot.old/mci_device.cpp	1970-01-01 01:00:00.000000000 +0100
-+++ romboot/mci_device.cpp	2007-03-22 18:52:48.000000000 +0100
-@@ -0,0 +1,581 @@
-+//*----------------------------------------------------------------------------
-+//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+//*----------------------------------------------------------------------------
-+//* The software is delivered "AS IS" without warranty or condition of any
-+//* kind, either express, implied or statutory. This includes without
-+//* limitation any warranty or condition with respect to merchantability or
-+//* fitness for any particular purpose, or against the infringements of
-+//* intellectual property rights of others.
-+//*----------------------------------------------------------------------------
-+//* File Name           : mci_device.c
-+//* Object              : TEST DataFlash Functions
-+//* Creation            : FB   26/11/2002
-+//*
-+//*----------------------------------------------------------------------------
-+
-+#include <AT91C_MCI_Device.h>
-+#include "com.h"
-+
-+#define ENABLE_WRITE 1
-+#undef MMC
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_SendCommand
-+//* \brief Generic function to send a command to the MMC or SDCard
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_SendCommand (
-+	AT91PS_MciDevice pMCI_Device,
-+	unsigned int Cmd,
-+	unsigned int Arg)
-+{
-+	unsigned int	error,status;
-+	//unsigned int	tick=0;
-+
-+    // Send the command
-+    AT91C_BASE_MCI->MCI_ARGR = Arg;
-+    AT91C_BASE_MCI->MCI_CMDR = Cmd;
-+
-+	// wait for CMDRDY Status flag to read the response
-+	do
-+	{
-+		status = AT91C_BASE_MCI->MCI_SR;
-+		//tick++;
-+	}
-+	while( !(status & AT91C_MCI_CMDRDY) );//&& (tick<100) );
-+
-+    // Test error  ==> if crc error and response R3 ==> don't check error
-+    error = (AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR;
-+	if(error != 0 )
-+	{
-+		// if the command is SEND_OP_COND the CRC error flag is always present (cf : R3 response)
-+		if ( (Cmd != AT91C_SDCARD_APP_OP_COND_CMD) && (Cmd != AT91C_MMC_SEND_OP_COND_CMD) )
-+			return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR);
-+		else
-+		{
-+			if (error != AT91C_MCI_RCRCE)
-+				return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR);
-+		}
-+	}
-+    return AT91C_CMD_SEND_OK;
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_SDCard_SendAppCommand
-+//* \brief Specific function to send a specific command to the SDCard
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_SDCard_SendAppCommand (
-+	AT91PS_MciDevice pMCI_Device,
-+	unsigned int Cmd_App,
-+	unsigned int Arg	)
-+{
-+	unsigned int status;
-+	//unsigned int	tick=0;
-+
-+	// Send the CMD55 for application specific command
-+    AT91C_BASE_MCI->MCI_ARGR = (pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address << 16 );
-+    AT91C_BASE_MCI->MCI_CMDR = AT91C_APP_CMD;
-+
-+	// wait for CMDRDY Status flag to read the response
-+	do
-+	{
-+		status = AT91C_BASE_MCI->MCI_SR;
-+		//tick++;
-+	}
-+	while( !(status & AT91C_MCI_CMDRDY) );//&& (tick<100) );	
-+
-+    // if an error occurs
-+    if (((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR) != 0 )
-+		return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR);
-+
-+    // check if it is a specific command and then send the command
-+	if ( (Cmd_App && AT91C_SDCARD_APP_ALL_CMD) == 0)
-+		return AT91C_CMD_SEND_ERROR;
-+
-+   return( AT91F_MCI_SendCommand(pMCI_Device,Cmd_App,Arg) );
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_GetStatus
-+//* \brief Addressed card sends its status register
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_GetStatus(AT91PS_MciDevice pMCI_Device,unsigned int relative_card_address)
-+{
-+	if (AT91F_MCI_SendCommand(pMCI_Device,
-+								AT91C_SEND_STATUS_CMD,
-+								relative_card_address <<16) == AT91C_CMD_SEND_OK)
-+    	return (AT91C_BASE_MCI->MCI_RSPR[0]);
-+
-+    return AT91C_CMD_SEND_ERROR;
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_Device_Handler
-+//* \brief MCI C interrupt handler
-+//*----------------------------------------------------------------------------
-+extern "C" void AT91F_MCI_Device_Handler(AT91PS_MciDevice, unsigned int);
-+
-+void AT91F_MCI_Device_Handler(
-+	AT91PS_MciDevice pMCI_Device,
-+	unsigned int status)
-+{
-+	// If End of Tx Buffer Empty interrupt occurred
-+	if ( status & AT91C_MCI_TXBUFE )
-+    {
-+		AT91C_BASE_MCI->MCI_IDR = AT91C_MCI_TXBUFE;
-+ 		AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_TXTDIS;
-+        	
-+		pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_IDLE;
-+	}	// End of if AT91C_MCI_TXBUFF		
-+	
-+    // If End of Rx Buffer Full interrupt occurred
-+    if ( status & AT91C_MCI_RXBUFF )
-+    {        
-+       	AT91C_BASE_MCI->MCI_IDR = AT91C_MCI_RXBUFF;
-+ 		AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_RXTDIS;
-+	
-+		pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_IDLE;
-+	}	// End of if AT91C_MCI_RXBUFF
-+
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_ReadBlock
-+//* \brief Read an ENTIRE block or PARTIAL block
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_ReadBlock(
-+	AT91PS_MciDevice pMCI_Device,
-+	int src,
-+	unsigned int *dataBuffer,
-+	int sizeToRead )
-+{
-+    ////////////////////////////////////////////////////////////////////////////////////////////
-+    if(pMCI_Device->pMCI_DeviceDesc->state != AT91C_MCI_IDLE)
-+    	return AT91C_READ_ERROR;
-+    
-+    if( (AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address) & AT91C_SR_READY_FOR_DATA) != AT91C_SR_READY_FOR_DATA)
-+    	return AT91C_READ_ERROR;
-+    	
-+    if ( (src + sizeToRead) > pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity )
-+		return AT91C_READ_ERROR;
-+
-+    // If source does not fit a begin of a block
-+	if ( (src % pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) != 0 )
-+		return AT91C_READ_ERROR;
-+   
-+     // Test if the MMC supports Partial Read Block
-+     // ALWAYS SUPPORTED IN SD Memory Card
-+     if( (sizeToRead < pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) 
-+    	&& (pMCI_Device->pMCI_DeviceFeatures->Read_Partial == 0x00) )
-+   		return AT91C_READ_ERROR;
-+   		
-+    if( sizeToRead > pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length)
-+   		return AT91C_READ_ERROR;
-+    ////////////////////////////////////////////////////////////////////////////////////////////
-+      
-+    // Init Mode Register
-+	AT91C_BASE_MCI->MCI_MR |= ((pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length << 16) | AT91C_MCI_PDCMODE);
-+	 
-+    if (sizeToRead %4)
-+		sizeToRead = (sizeToRead /4)+1;
-+	else
-+		sizeToRead = sizeToRead/4;
-+
-+	AT91C_BASE_PDC_MCI->PDC_PTCR = (AT91C_PDC_TXTDIS | AT91C_PDC_RXTDIS);
-+    AT91C_BASE_PDC_MCI->PDC_RPR  = (unsigned int)dataBuffer;
-+    AT91C_BASE_PDC_MCI->PDC_RCR  = sizeToRead;
-+
-+	// Send the Read single block command
-+    if ( AT91F_MCI_SendCommand(pMCI_Device, AT91C_READ_SINGLE_BLOCK_CMD, src) != AT91C_CMD_SEND_OK )
-+    	return AT91C_READ_ERROR;
-+
-+	pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_RX_SINGLE_BLOCK;
-+
-+	// Enable AT91C_MCI_RXBUFF Interrupt
-+    AT91C_BASE_MCI->MCI_IER = AT91C_MCI_RXBUFF;
-+
-+	// (PDC) Receiver Transfer Enable
-+	AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_RXTEN;
-+	
-+	return AT91C_READ_OK;
-+}
-+
-+
-+#ifdef ENABLE_WRITE
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_WriteBlock
-+//* \brief  Write an ENTIRE block but not always PARTIAL block !!!
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_WriteBlock(
-+	AT91PS_MciDevice pMCI_Device,
-+	int dest,
-+	unsigned int *dataBuffer,
-+	int sizeToWrite )
-+{
-+    ////////////////////////////////////////////////////////////////////////////////////////////
-+	if( pMCI_Device->pMCI_DeviceDesc->state != AT91C_MCI_IDLE)
-+    	return AT91C_WRITE_ERROR;
-+    
-+    if( (AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address) & AT91C_SR_READY_FOR_DATA) != AT91C_SR_READY_FOR_DATA)
-+    	return AT91C_WRITE_ERROR;
-+    	
-+    if ( (dest + sizeToWrite) > pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity )
-+		return AT91C_WRITE_ERROR;
-+
-+    // If source does not fit a begin of a block
-+	if ( (dest % pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) != 0 )
-+		return AT91C_WRITE_ERROR;
-+   
-+    // Test if the MMC supports Partial Write Block 
-+    if( (sizeToWrite < pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length) 
-+    	&& (pMCI_Device->pMCI_DeviceFeatures->Write_Partial == 0x00) )
-+   		return AT91C_WRITE_ERROR;
-+   		
-+   	if( sizeToWrite > pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length )
-+   		return AT91C_WRITE_ERROR;
-+    ////////////////////////////////////////////////////////////////////////////////////////////
-+  
-+    // Init Mode Register
-+	AT91C_BASE_MCI->MCI_MR |= ((pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length << 16) | AT91C_MCI_PDCMODE);
-+	
-+	if (sizeToWrite %4)
-+		sizeToWrite = (sizeToWrite /4)+1;
-+	else
-+		sizeToWrite = sizeToWrite/4;
-+
-+	// Init PDC for write sequence
-+    AT91C_BASE_PDC_MCI->PDC_PTCR = (AT91C_PDC_TXTDIS | AT91C_PDC_RXTDIS);
-+    AT91C_BASE_PDC_MCI->PDC_TPR = (unsigned int) dataBuffer;
-+    AT91C_BASE_PDC_MCI->PDC_TCR = sizeToWrite;
-+
-+	// Send the write single block command
-+    if ( AT91F_MCI_SendCommand(pMCI_Device, AT91C_WRITE_BLOCK_CMD, dest) != AT91C_CMD_SEND_OK)
-+    	return AT91C_WRITE_ERROR;
-+
-+	pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_TX_SINGLE_BLOCK;
-+
-+	// Enable AT91C_MCI_TXBUFE Interrupt
-+    AT91C_BASE_MCI->MCI_IER = AT91C_MCI_TXBUFE;
-+  
-+  	// Enables TX for PDC transfert requests
-+    AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_TXTEN;
-+  
-+	return AT91C_WRITE_OK;
-+}
-+#endif
-+
-+#ifdef MMC
-+//*------------------------------------------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_MMC_SelectCard
-+//* \brief Toggles a card between the Stand_by and Transfer states or between Programming and Disconnect states
-+//*------------------------------------------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_MMC_SelectCard(AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address)
-+{
-+    int status;
-+	
-+	//* Check if the MMC card chosen is already the selected one
-+	status = AT91F_MCI_GetStatus(pMCI_Device,relative_card_address);
-+
-+	if (status < 0)
-+		return AT91C_CARD_SELECTED_ERROR;
-+
-+	if ((status & AT91C_SR_CARD_SELECTED) == AT91C_SR_CARD_SELECTED)
-+		return AT91C_CARD_SELECTED_OK;
-+
-+	//* Search for the MMC Card to be selected, status = the Corresponding Device Number
-+	status = 0;
-+	while( (pMCI_Device->pMCI_DeviceFeatures[status].Relative_Card_Address != relative_card_address)
-+		   && (status < AT91C_MAX_MCI_CARDS) )
-+		status++;
-+
-+	if (status > AT91C_MAX_MCI_CARDS)
-+    	return AT91C_CARD_SELECTED_ERROR;
-+
-+    if (AT91F_MCI_SendCommand( pMCI_Device,
-+    								   AT91C_SEL_DESEL_CARD_CMD,
-+    								   pMCI_Device->pMCI_DeviceFeatures[status].Relative_Card_Address << 16) == AT91C_CMD_SEND_OK)
-+    	return AT91C_CARD_SELECTED_OK;
-+    return AT91C_CARD_SELECTED_ERROR;
-+}
-+#endif
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_GetCSD
-+//* \brief Asks to the specified card to send its CSD
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_GetCSD (AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address , unsigned int * response)
-+{
-+ 	
-+ 	if(AT91F_MCI_SendCommand(pMCI_Device,
-+								  AT91C_SEND_CSD_CMD,
-+								  (relative_card_address << 16)) != AT91C_CMD_SEND_OK)
-+		return AT91C_CMD_SEND_ERROR;
-+	
-+    response[0] = AT91C_BASE_MCI->MCI_RSPR[0];
-+   	response[1] = AT91C_BASE_MCI->MCI_RSPR[1];
-+    response[2] = AT91C_BASE_MCI->MCI_RSPR[2];
-+    response[3] = AT91C_BASE_MCI->MCI_RSPR[3];
-+    
-+    return AT91C_CMD_SEND_OK;
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_SetBlocklength
-+//* \brief Select a block length for all following block commands (R/W)
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_SetBlocklength(AT91PS_MciDevice pMCI_Device,unsigned int length)
-+{
-+    return( AT91F_MCI_SendCommand(pMCI_Device, AT91C_SET_BLOCKLEN_CMD, length) );
-+}
-+
-+#ifdef MMC
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_MMC_GetAllOCR
-+//* \brief Asks to all cards to send their operations conditions
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_MMC_GetAllOCR (AT91PS_MciDevice pMCI_Device)
-+{
-+	unsigned int	response =0x0;
-+ 	
-+ 	while(1)
-+    {
-+    	response = AT91F_MCI_SendCommand(pMCI_Device,
-+  										AT91C_MMC_SEND_OP_COND_CMD,
-+  										AT91C_MMC_HOST_VOLTAGE_RANGE);
-+		if (response != AT91C_CMD_SEND_OK)
-+			return AT91C_INIT_ERROR;
-+		
-+		response = AT91C_BASE_MCI->MCI_RSPR[0];
-+		
-+		if ( (response & AT91C_CARD_POWER_UP_BUSY) == AT91C_CARD_POWER_UP_BUSY)
-+			return(response);	
-+	}
-+}
-+#endif
-+
-+#ifdef MMC
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_MMC_GetAllCID
-+//* \brief Asks to the MMC on the chosen slot to send its CID
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_MMC_GetAllCID (AT91PS_MciDevice pMCI_Device, unsigned int *response)
-+{
-+	int Nb_Cards_Found=-1;
-+  
-+	while(1)
-+	{
-+	 	if(AT91F_MCI_SendCommand(pMCI_Device,
-+								AT91C_MMC_ALL_SEND_CID_CMD,
-+								AT91C_NO_ARGUMENT) != AT91C_CMD_SEND_OK)
-+			return Nb_Cards_Found;
-+		else
-+		{		
-+			Nb_Cards_Found = 0;
-+			//* Assignation of the relative address to the MMC CARD
-+			pMCI_Device->pMCI_DeviceFeatures[Nb_Cards_Found].Relative_Card_Address = Nb_Cards_Found + AT91C_FIRST_RCA;
-+			//* Set the insert flag
-+			pMCI_Device->pMCI_DeviceFeatures[Nb_Cards_Found].Card_Inserted = AT91C_MMC_CARD_INSERTED;
-+	
-+			if (AT91F_MCI_SendCommand(pMCI_Device,
-+									 AT91C_MMC_SET_RELATIVE_ADDR_CMD,
-+									 (Nb_Cards_Found + AT91C_FIRST_RCA) << 16) != AT91C_CMD_SEND_OK)
-+				return AT91C_CMD_SEND_ERROR;
-+				 
-+			//* If no error during assignation address ==> Increment Nb_cards_Found
-+			Nb_Cards_Found++ ;
-+		}
-+	}
-+}
-+#endif
-+#ifdef MMC
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_MMC_Init
-+//* \brief Return the MMC initialisation status
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_MMC_Init (AT91PS_MciDevice pMCI_Device)
-+{
-+    unsigned int	tab_response[4];
-+	unsigned int	mult,blocknr;
-+	unsigned int 	i,Nb_Cards_Found=0;
-+
-+	//* Resets all MMC Cards in Idle state
-+	AT91F_MCI_SendCommand(pMCI_Device, AT91C_MMC_GO_IDLE_STATE_CMD, AT91C_NO_ARGUMENT);
-+
-+    if(AT91F_MCI_MMC_GetAllOCR(pMCI_Device) == AT91C_INIT_ERROR)
-+    	return AT91C_INIT_ERROR;
-+
-+	Nb_Cards_Found = AT91F_MCI_MMC_GetAllCID(pMCI_Device,tab_response);
-+	if (Nb_Cards_Found != AT91C_CMD_SEND_ERROR)
-+	{
-+	    //* Set the Mode Register
-+    	AT91C_BASE_MCI->MCI_MR = AT91C_MCI_MR_PDCMODE;
-+
-+		for(i = 0; i < Nb_Cards_Found; i++)
-+		{
-+			if (AT91F_MCI_GetCSD(pMCI_Device,
-+									  pMCI_Device->pMCI_DeviceFeatures[i].Relative_Card_Address,
-+									  tab_response) != AT91C_CMD_SEND_OK)
-+				pMCI_Device->pMCI_DeviceFeatures[i].Relative_Card_Address = 0;					  
-+			else
-+			{
-+				pMCI_Device->pMCI_DeviceFeatures[i].Max_Read_DataBlock_Length = 1 << ((tab_response[1] >> AT91C_CSD_RD_B_LEN_S) & AT91C_CSD_RD_B_LEN_M );
-+	 			pMCI_Device->pMCI_DeviceFeatures[i].Max_Write_DataBlock_Length =	1 << ((tab_response[3] >> AT91C_CSD_WBLEN_S) & AT91C_CSD_WBLEN_M );
-+				pMCI_Device->pMCI_DeviceFeatures[i].Sector_Size = 1 + ((tab_response[2] >> AT91C_CSD_v22_SECT_SIZE_S) & AT91C_CSD_v22_SECT_SIZE_M );
-+		  		pMCI_Device->pMCI_DeviceFeatures[i].Read_Partial = (tab_response[1] >> AT91C_CSD_RD_B_PAR_S) & AT91C_CSD_RD_B_PAR_M;
-+				pMCI_Device->pMCI_DeviceFeatures[i].Write_Partial = (tab_response[3] >> AT91C_CSD_WBLOCK_P_S) & AT91C_CSD_WBLOCK_P_M;
-+				
-+				// None in MMC specification version 2.2
-+				pMCI_Device->pMCI_DeviceFeatures[i].Erase_Block_Enable = 0;
-+				
-+				pMCI_Device->pMCI_DeviceFeatures[i].Read_Block_Misalignment = (tab_response[1] >> AT91C_CSD_RD_B_MIS_S) & AT91C_CSD_RD_B_MIS_M;
-+				pMCI_Device->pMCI_DeviceFeatures[i].Write_Block_Misalignment = (tab_response[1] >> AT91C_CSD_WR_B_MIS_S) & AT91C_CSD_WR_B_MIS_M;
-+
-+				//// Compute Memory Capacity
-+				// compute MULT
-+				mult = 1 << ( ((tab_response[2] >> AT91C_CSD_C_SIZE_M_S) & AT91C_CSD_C_SIZE_M_M) + 2 );
-+				// compute MSB of C_SIZE
-+				blocknr = ((tab_response[1] >> AT91C_CSD_CSIZE_H_S) & AT91C_CSD_CSIZE_H_M) << 2;
-+				// compute MULT * (LSB of C-SIZE + MSB already computed + 1) = BLOCKNR
-+				blocknr = mult * ( ( blocknr + ( (tab_response[2] >> AT91C_CSD_CSIZE_L_S) & AT91C_CSD_CSIZE_L_M) ) + 1 );
-+
-+				pMCI_Device->pMCI_DeviceFeatures[i].Memory_Capacity =  pMCI_Device->pMCI_DeviceFeatures[i].Max_Read_DataBlock_Length * blocknr;
-+		  		//// End of Compute Memory Capacity
-+		  		
-+			}	// end of else			  
-+		}	// end of for
-+		
-+		return AT91C_INIT_OK;
-+	}	// end of if
-+
-+    return AT91C_INIT_ERROR;
-+}
-+#endif
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_SDCard_GetOCR
-+//* \brief Asks to all cards to send their operations conditions
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_SDCard_GetOCR (AT91PS_MciDevice pMCI_Device)
-+{
-+	unsigned int	response =0x0;
-+
-+	// The RCA to be used for CMD55 in Idle state shall be the card's default RCA=0x0000.
-+	pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address = 0x0;
-+ 	
-+ 	while( (response & AT91C_CARD_POWER_UP_BUSY) != AT91C_CARD_POWER_UP_BUSY )
-+    {
-+    	response = AT91F_MCI_SDCard_SendAppCommand(pMCI_Device,
-+  										AT91C_SDCARD_APP_OP_COND_CMD,
-+  										AT91C_MMC_HOST_VOLTAGE_RANGE);
-+		if (response != AT91C_CMD_SEND_OK)
-+			return AT91C_INIT_ERROR;
-+		
-+		response = AT91C_BASE_MCI->MCI_RSPR[0];
-+	}
-+	
-+	return(AT91C_BASE_MCI->MCI_RSPR[0]);
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_SDCard_GetCID
-+//* \brief Asks to the SDCard on the chosen slot to send its CID
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_SDCard_GetCID (AT91PS_MciDevice pMCI_Device, unsigned int *response)
-+{
-+ 	if(AT91F_MCI_SendCommand(pMCI_Device,
-+							AT91C_ALL_SEND_CID_CMD,
-+							AT91C_NO_ARGUMENT) != AT91C_CMD_SEND_OK)
-+		return AT91C_CMD_SEND_ERROR;
-+	
-+    response[0] = AT91C_BASE_MCI->MCI_RSPR[0];
-+   	response[1] = AT91C_BASE_MCI->MCI_RSPR[1];
-+    response[2] = AT91C_BASE_MCI->MCI_RSPR[2];
-+    response[3] = AT91C_BASE_MCI->MCI_RSPR[3];
-+    
-+    return AT91C_CMD_SEND_OK;
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_SDCard_SetBusWidth
-+//* \brief  Set bus width for SDCard
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_SDCard_SetBusWidth(AT91PS_MciDevice pMCI_Device)
-+{
-+	volatile int	ret_value;
-+	char			bus_width;
-+
-+	do
-+	{
-+		ret_value =AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address);
-+	}
-+	while((ret_value > 0) && ((ret_value & AT91C_SR_READY_FOR_DATA) == 0));
-+
-+	// Select Card
-+    AT91F_MCI_SendCommand(pMCI_Device,
-+    						AT91C_SEL_DESEL_CARD_CMD,
-+    						(pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address)<<16);
-+
-+	// Set bus width for Sdcard
-+	if(pMCI_Device->pMCI_DeviceDesc->SDCard_bus_width == AT91C_MCI_SCDBUS)
-+		 	bus_width = AT91C_BUS_WIDTH_4BITS;
-+	else	bus_width = AT91C_BUS_WIDTH_1BIT;
-+
-+	if (AT91F_MCI_SDCard_SendAppCommand(pMCI_Device,AT91C_SDCARD_SET_BUS_WIDTH_CMD,bus_width) != AT91C_CMD_SEND_OK)
-+		return AT91C_CMD_SEND_ERROR;
-+
-+	return AT91C_CMD_SEND_OK;
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_SDCard_Init
-+//* \brief Return the SDCard initialisation status
-+//*----------------------------------------------------------------------------
-+AT91S_MCIDeviceStatus AT91F_MCI_SDCard_Init (AT91PS_MciDevice pMCI_Device)
-+{
-+    unsigned int	tab_response[4];
-+	unsigned int	mult,blocknr;
-+
-+	AT91F_MCI_SendCommand(pMCI_Device, AT91C_GO_IDLE_STATE_CMD, AT91C_NO_ARGUMENT);
-+
-+    if(AT91F_MCI_SDCard_GetOCR(pMCI_Device) == AT91C_INIT_ERROR)
-+    	return AT91C_INIT_ERROR;
-+
-+	if (AT91F_MCI_SDCard_GetCID(pMCI_Device,tab_response) == AT91C_CMD_SEND_OK)
-+	{
-+	    pMCI_Device->pMCI_DeviceFeatures->Card_Inserted = AT91C_SD_CARD_INSERTED;
-+
-+	    if (AT91F_MCI_SendCommand(pMCI_Device, AT91C_SET_RELATIVE_ADDR_CMD, 0) == AT91C_CMD_SEND_OK)
-+		{
-+			pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address = (AT91C_BASE_MCI->MCI_RSPR[0] >> 16);
-+			if (AT91F_MCI_GetCSD(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address,tab_response) == AT91C_CMD_SEND_OK)
-+			{
-+		  		pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length = 1 << ((tab_response[1] >> AT91C_CSD_RD_B_LEN_S) & AT91C_CSD_RD_B_LEN_M );
-+	 			pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length =	1 << ((tab_response[3] >> AT91C_CSD_WBLEN_S) & AT91C_CSD_WBLEN_M );
-+				pMCI_Device->pMCI_DeviceFeatures->Sector_Size = 1 + ((tab_response[2] >> AT91C_CSD_v21_SECT_SIZE_S) & AT91C_CSD_v21_SECT_SIZE_M );
-+		  		pMCI_Device->pMCI_DeviceFeatures->Read_Partial = (tab_response[1] >> AT91C_CSD_RD_B_PAR_S) & AT91C_CSD_RD_B_PAR_M;
-+				pMCI_Device->pMCI_DeviceFeatures->Write_Partial = (tab_response[3] >> AT91C_CSD_WBLOCK_P_S) & AT91C_CSD_WBLOCK_P_M;
-+				pMCI_Device->pMCI_DeviceFeatures->Erase_Block_Enable = (tab_response[3] >> AT91C_CSD_v21_ER_BLEN_EN_S) & AT91C_CSD_v21_ER_BLEN_EN_M;
-+				pMCI_Device->pMCI_DeviceFeatures->Read_Block_Misalignment = (tab_response[1] >> AT91C_CSD_RD_B_MIS_S) & AT91C_CSD_RD_B_MIS_M;
-+				pMCI_Device->pMCI_DeviceFeatures->Write_Block_Misalignment = (tab_response[1] >> AT91C_CSD_WR_B_MIS_S) & AT91C_CSD_WR_B_MIS_M;
-+
-+				//// Compute Memory Capacity
-+					// compute MULT
-+					mult = 1 << ( ((tab_response[2] >> AT91C_CSD_C_SIZE_M_S) & AT91C_CSD_C_SIZE_M_M) + 2 );
-+					// compute MSB of C_SIZE
-+					blocknr = ((tab_response[1] >> AT91C_CSD_CSIZE_H_S) & AT91C_CSD_CSIZE_H_M) << 2;
-+					// compute MULT * (LSB of C-SIZE + MSB already computed + 1) = BLOCKNR
-+					blocknr = mult * ( ( blocknr + ( (tab_response[2] >> AT91C_CSD_CSIZE_L_S) & AT91C_CSD_CSIZE_L_M) ) + 1 );
-+
-+					pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity =  pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length * blocknr;
-+			  	//// End of Compute Memory Capacity
-+					printf("BLK 0x%x", pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length);
-+
-+		  		if( AT91F_MCI_SDCard_SetBusWidth(pMCI_Device) == AT91C_CMD_SEND_OK )
-+				{	
-+					 if (AT91F_MCI_SetBlocklength(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) == AT91C_CMD_SEND_OK)
-+					return AT91C_INIT_OK;
-+				}
-+			}
-+		}
-+	}
-+    return AT91C_INIT_ERROR;
-+}
-diff -urN romboot.old/mci_main.cpp romboot/mci_main.cpp
---- romboot.old/mci_main.cpp	1970-01-01 01:00:00.000000000 +0100
-+++ romboot/mci_main.cpp	2007-03-22 18:52:58.000000000 +0100
-@@ -0,0 +1,317 @@
-+//*----------------------------------------------------------------------------
-+//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+//*----------------------------------------------------------------------------
-+//* The software is delivered "AS IS" without warranty or condition of any
-+//* kind, either express, implied or statutory. This includes without
-+//* limitation any warranty or condition with respect to merchantability or
-+//* fitness for any particular purpose, or against the infringements of
-+//* intellectual property rights of others.
-+//*----------------------------------------------------------------------------
-+//* File Name           : main.c
-+//* Object              : main application written in C
-+//* Creation            : FB   21/11/2002
-+//*
-+//*----------------------------------------------------------------------------
-+#include "com.h"
-+#include "dataflash.h"
-+#include <AT91C_MCI_Device.h>
-+
-+#define AT91C_MCI_TIMEOUT			1000000   /* For AT91F_MCIDeviceWaitReady */
-+#define BUFFER_SIZE_MCI_DEVICE		512
-+#define MASTER_CLOCK				60000000
-+#define FALSE						-1
-+#define TRUE						1
-+
-+//* External Functions
-+extern "C" void AT91F_ASM_MCI_Handler(void);
-+extern "C" void AT91F_MCI_Device_Handler(AT91PS_MciDevice,unsigned int);
-+extern AT91S_MCIDeviceStatus 	AT91F_MCI_SDCard_Init (AT91PS_MciDevice);
-+extern AT91S_MCIDeviceStatus 	AT91F_MCI_SetBlocklength(AT91PS_MciDevice,unsigned int);
-+extern AT91S_MCIDeviceStatus 	AT91F_MCI_ReadBlock(AT91PS_MciDevice,int,unsigned int *,int);
-+extern AT91S_MCIDeviceStatus 	AT91F_MCI_WriteBlock(AT91PS_MciDevice,int,unsigned int *,int);
-+//* Global Variables
-+AT91S_MciDeviceFeatures			MCI_Device_Features;
-+AT91S_MciDeviceDesc				MCI_Device_Desc;
-+AT91S_MciDevice					MCI_Device;
-+
-+unsigned int dlBuffer = 0x20000000;
-+#undef MCI_TEST
-+#ifdef MCI_TEST
-+char TestString[] = "\r\nHello Hamish\r\n";
-+#endif
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCIDeviceWaitReady
-+//* \brief Wait for MCI Device ready
-+//*----------------------------------------------------------------------------
-+void AT91F_MCIDeviceWaitReady(unsigned int timeout)
-+{
-+	volatile int status;
-+	
-+	do
-+	{
-+		status = AT91C_BASE_MCI->MCI_SR;
-+		timeout--;
-+	}
-+	while( !(status & AT91C_MCI_NOTBUSY)  && (timeout>0) );	
-+}
-+
-+unsigned int swab32(unsigned int data)
-+{
-+	unsigned int res = 0;
-+
-+	res = (data & 0x000000ff) << 24 |
-+				(data & 0x0000ff00) << 8  |
-+				(data & 0x00ff0000) >> 8  |
-+				(data & 0xff000000) >> 24;
-+
-+	return res;
-+}
-+
-+AT91S_MCIDeviceStatus readblock(
-+	AT91PS_MciDevice pMCI_Device,
-+	int src,
-+	unsigned int *databuffer,
-+	int sizeToRead)
-+{
-+	int i;
-+	unsigned char *buf = (unsigned char *)databuffer;
-+
-+	//* Read Block 1
-+	for(i=0;i<BUFFER_SIZE_MCI_DEVICE;i++)
-+		*buf++ = 0x00;	
-+	AT91F_MCI_ReadBlock(&MCI_Device,src,databuffer,sizeToRead);
-+
-+	//* Wait end of Read
-+	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
-+
-+	{
-+		int index;
-+		unsigned int *uiBuffer = databuffer;
-+
-+		for(index = 0; index < 512/4; index++)
-+			uiBuffer[index] = swab32(uiBuffer[index]);
-+	}
-+	return(1);
-+}
-+
-+#if 0
-+void printdata(unsigned int bufpos)
-+	{
-+		unsigned int *uip;
-+		int linebytes = 16;
-+		int nbytes = 64;
-+		int size = 4;
-+		int i;
-+
-+		uip = (unsigned int *)bufpos;
-+
-+		do {
-+
-+			for(i=0; i<linebytes; i+=size) {
-+				printf(" %08x", *uip++);
-+				}
-+			
-+			printf("\n\r");
-+			nbytes -= linebytes;
-+		} while (nbytes > 0);
-+	}
-+#endif
-+//extern char message[40];
-+
-+int notnull(int bufpos, unsigned int len)
-+{
-+	int i;
-+	unsigned char * bp = (unsigned char *)bufpos;
-+
-+	for (i=0; i<len; i++)
-+		if (bp[i] != '\0')
-+			return(1);
-+
-+	return(0);
-+}
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_Test
-+//* \brief Test Functions
-+//*----------------------------------------------------------------------------
-+int AT91F_Test(void)
-+{
-+	int i;
-+	unsigned int Max_Read_DataBlock_Length;
-+	int block = 0;
-+	int bufpos = dlBuffer;
-+	int lastvalid = 0;
-+	int NbPage = 0;
-+
-+		
-+	Max_Read_DataBlock_Length = MCI_Device.pMCI_DeviceFeatures->Max_Read_DataBlock_Length;
-+	
-+	//* ReadBlock & WriteBlock Test -> Entire Block
-+
-+	//* Wait MCI Device Ready
-+	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
-+
-+#ifdef MCI_TEST
-+	//* Read Block 1
-+	for(i=0;i<BUFFER_SIZE_MCI_DEVICE;i++) 	Buffer[i] = 0x00;	
-+	AT91F_MCI_ReadBlock(&MCI_Device,(1*Max_Read_DataBlock_Length),(unsigned int*) Buffer,Max_Read_DataBlock_Length);
-+
-+	//* Wait end of Read
-+	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
-+
-+	// Write Page 1
-+//    sprintf(Buffer,"\n\rThis sentence is written in your device... Congratulations\n\r");
-+	for(i=0; i<16; i++)
-+		Buffer[i] = TestString[i];
-+	AT91F_MCI_WriteBlock(&MCI_Device,(1*Max_Read_DataBlock_Length),(unsigned int*) Buffer,Max_Read_DataBlock_Length);
-+
-+	//* Wait end of Write
-+	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
-+#endif
-+
-+	for(i=0; i<64; i++) {
-+		readblock(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length);
-+		if (notnull(bufpos, Max_Read_DataBlock_Length))
-+			lastvalid++;
-+		block++;
-+		bufpos += 512;
-+		}
-+
-+	i = dataflash_info[0].Device.pages_number;
-+	while(i>>=1)
-+		NbPage++;
-+	i = lastvalid + (NbPage << 13) + (dataflash_info[0].Device.pages_size << 17);
-+	*(int *)(dlBuffer + 0x14) = i;
-+
-+	for(i=0; i<4688; i++) {
-+		readblock(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length);
-+		block++;
-+		bufpos += 512;
-+		}
-+	write_dataflash(0xc0000000, dlBuffer, 512 * block);
-+	//* End Of Test
-+	printf("DONE %d\n\r", lastvalid);
-+			
-+//	printf(Buffer);
-+
-+	return TRUE;
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_CfgDevice
-+//* \brief This function is used to initialise MMC or SDCard Features
-+//*----------------------------------------------------------------------------
-+void AT91F_CfgDevice(void)
-+{
-+	// Init Device Structure
-+
-+	MCI_Device_Features.Relative_Card_Address 		= 0;
-+	MCI_Device_Features.Card_Inserted 				= AT91C_CARD_REMOVED;
-+	MCI_Device_Features.Max_Read_DataBlock_Length	= 0;
-+	MCI_Device_Features.Max_Write_DataBlock_Length 	= 0;
-+	MCI_Device_Features.Read_Partial 				= 0;
-+	MCI_Device_Features.Write_Partial 				= 0;
-+	MCI_Device_Features.Erase_Block_Enable 			= 0;
-+	MCI_Device_Features.Sector_Size 				= 0;
-+	MCI_Device_Features.Memory_Capacity 			= 0;
-+	
-+	MCI_Device_Desc.state							= AT91C_MCI_IDLE;
-+	MCI_Device_Desc.SDCard_bus_width				= AT91C_MCI_SCDBUS;
-+	
-+	// Init AT91S_DataFlash Global Structure, by default AT45DB choosen !!!
-+	MCI_Device.pMCI_DeviceDesc 		= &MCI_Device_Desc;
-+	MCI_Device.pMCI_DeviceFeatures 	= &MCI_Device_Features;
-+
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_Test_SDCard
-+//* \brief Configure MCI for SDCard and complete SDCard init, then jump to Test Functions
-+//*----------------------------------------------------------------------------
-+int AT91F_Test_SDCard(void)
-+{
-+	//////////////////////////////////////////////////////////
-+	//* For SDCard Init
-+	//////////////////////////////////////////////////////////
-+
-+	AT91F_MCI_Configure(AT91C_BASE_MCI,
-+						AT91C_MCI_DTOR_1MEGA_CYCLES,
-+						AT91C_MCI_MR_PDCMODE,			// 15MHz for MCK = 60MHz (CLKDIV = 1)
-+						AT91C_MCI_SDCARD_4BITS_SLOTA);
-+	
-+	if(AT91F_MCI_SDCard_Init(&MCI_Device) != AT91C_INIT_OK)
-+		return FALSE;
-+
-+	printf("\n\rINI OK: TST\n\r");
-+
-+	// Enter Main Tests	
-+	return(AT91F_Test());
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_Handler
-+//* \brief MCI Handler
-+//*----------------------------------------------------------------------------
-+extern "C" void AT91F_MCI_Handler(void);
-+
-+void AT91F_MCI_Handler(void)
-+{
-+	int status;
-+
-+	status = ( AT91C_BASE_MCI->MCI_SR & AT91C_BASE_MCI->MCI_IMR );
-+
-+	AT91F_MCI_Device_Handler(&MCI_Device,status);
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    main
-+//* \brief main function
-+//*----------------------------------------------------------------------------
-+int mci_main(void)
-+{
-+//	printf("MCI Test\n\r");
-+
-+///////////////////////////////////////////////////////////////////////////////////////////
-+//  MCI Init : common to MMC and SDCard
-+///////////////////////////////////////////////////////////////////////////////////////////
-+
-+//	printf("\n\rInit MCI Interface\n\r");
-+
-+    // Set up PIO SDC_TYPE to switch on MMC/SDCard and not DataFlash Card
-+	AT91F_PIO_CfgOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7);
-+	AT91F_PIO_SetOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7);
-+	
-+	// Init MCI for MMC and SDCard interface
-+	AT91F_MCI_CfgPIO();	
-+	AT91F_MCI_CfgPMC();
-+	AT91F_PDC_Open(AT91C_BASE_PDC_MCI);
-+
-+    // Disable all the interrupts
-+    AT91C_BASE_MCI->MCI_IDR = 0xFFFFFFFF;
-+
-+	// Init MCI Device Structures
-+	AT91F_CfgDevice();
-+
-+	// Configure MCI interrupt 
-+	AT91F_AIC_ConfigureIt(AT91C_BASE_AIC,
-+						 AT91C_ID_MCI,
-+						 AT91C_AIC_PRIOR_HIGHEST,
-+						 AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE,
-+						 AT91F_ASM_MCI_Handler);
-+
-+	// Enable MCI interrupt
-+	AT91F_AIC_EnableIt(AT91C_BASE_AIC,AT91C_ID_MCI);
-+
-+///////////////////////////////////////////////////////////////////////////////////////////
-+//  Enter Test Menu
-+///////////////////////////////////////////////////////////////////////////////////////////
-+
-+	// Enable Receiver
-+	AT91F_US_EnableRx((AT91PS_USART) AT91C_BASE_DBGU);
-+
-+	if(AT91F_Test_SDCard() == TRUE)
-+		printf("\n\rTST OK\n\r");
-+	else
-+		printf("\n\rTST Fail\n\r");
-+	return(1);		
-+}
diff --git a/target/linux/at91-2.6/image/romboot/patches/003-SD-reflash.patch b/target/linux/at91-2.6/image/romboot/patches/003-SD-reflash.patch
deleted file mode 100644
index b0d5baf..0000000
--- a/target/linux/at91-2.6/image/romboot/patches/003-SD-reflash.patch
+++ /dev/null
@@ -1,948 +0,0 @@
-diff -urN romboot.old/init.cpp romboot/init.cpp
---- romboot.old/init.cpp	2007-03-24 13:34:19.000000000 +0100
-+++ romboot/init.cpp	2007-03-24 12:23:19.000000000 +0100
-@@ -207,9 +207,10 @@
- 	AT91F_US_EnableRx((AT91PS_USART)AT91C_BASE_DBGU);
- 
- 	/* Enable PIO to access the LEDs */
--	AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB2;
--	AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB2;
--	AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB2;
-+	AT91C_BASE_PIOC->PIO_PER = AT91C_PIO_PC7 | AT91C_PIO_PC8 | AT91C_PIO_PC14 | AT91C_PIO_PC15;
-+	AT91C_BASE_PIOC->PIO_OER = AT91C_PIO_PC7 | AT91C_PIO_PC8 | AT91C_PIO_PC14 | AT91C_PIO_PC15;
-+	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15;
-+	AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC8 | AT91C_PIO_PC14;
-   
- 	// AT91F_DBGU_Printk("\n\rAT91F_LowLevelInit(): Debug channel initialized\n\r");
- }
-diff -urN romboot.old/main.cpp romboot/main.cpp
---- romboot.old/main.cpp	2007-03-24 13:34:19.000000000 +0100
-+++ romboot/main.cpp	2007-03-24 12:28:55.000000000 +0100
-@@ -13,6 +13,7 @@
- //*----------------------------------------------------------------------------
- #include <AT91RM9200.h>
- #include <lib_AT91RM9200.h>
-+#include <AT91C_MCI_Device.h>
- 
- #include "com.h"
- #include "main.h"
-@@ -39,16 +40,31 @@
- extern void AT91F_DBGU_Printk(char *);
- extern "C" void AT91F_ST_ASM_Handler(void);
- extern "C" void Jump(unsigned int addr);
--extern int mci_main(void);
-+extern int AT91F_MCI_Init(void);
-+#define TRUE 1
-+#define FALSE 0
-+
-+/* from trxhdr.h */
-+
-+#define TRX_MAGIC 0x30524448	/* "HDR0" */
-+#define TRX_VERSION 1
-+
-+struct trx_header {
-+	unsigned int magic;
-+	unsigned int len;
-+	unsigned int crc32;
-+	unsigned int flag_version;
-+	unsigned int offsets[3];
-+};
- 
- //const char *menu_separ = "*----------------------------------------*\n\r";
- 
- const char *menu_dataflash = {
--  "1: DL DF [ad]\n\r"
--  "2: RD DF [ad]\n\r"
--	"3: CP SD\n\r"
--  "4: U-BOOT\n\r"
--  "5: RM BL in DF\n\r"
-+  "1: Download DF [addr]\n\r"
-+  "2: Read DF [addr]\n\r"
-+	"3: Copy SD-Card\n\r"
-+  "4: Start U-BOOT\n\r"
-+  "5: Clear bootloder\n\r"
- };
- 
- //* Globales variables 
-@@ -155,14 +171,15 @@
- //*-----------------------------------------------------------------------------
- void AT91F_DisplayMenu(void)
- {
--  printf("\n\rFDL SD-Card LOADER %s %s %s\n\r", AT91C_VERSION, __DATE__, __TIME__);
--//  printf(menu_separ);	
--  AT91F_DataflashPrintInfo();
--//  printf(menu_separ);	
-   printf(menu_dataflash);			
--//  printf(menu_separ);	
- }	
- 
-+void AT91F_DisplayIntro(void)
-+{
-+  printf("\n\rFDL LOADER %s %s %s\n\r", AT91C_VERSION, __DATE__, __TIME__);
-+  AT91F_DataflashPrintInfo();
-+}
-+
- //*-----------------------------------------------------------------------------
- //* Function Name       : AsciiToHex()
- //* Object              : ascii to hexa conversion
-@@ -311,23 +328,24 @@
-   AT91F_SetPLL();
- }
- 
--/*void LedCode(void)
-+/*
-+void LedCode(void)
- {
- 	int *pRegister;
- 	pRegister = (int *)0xFFFFF800; // Enable port C peripheral reg
--        *pRegister = 0x3c00;
-+        *pRegister = (AT91C_PIO_PC7 | AT91C_PIO_PC8 | AT91C_PIO_PC14 | AT91C_PIO_PC15);
-         pRegister = (int *)0xFFFFF810; // Output Enable reg
--        *pRegister = 0x3c00;
-+        *pRegister = (AT91C_PIO_PC7 | AT91C_PIO_PC8 | AT91C_PIO_PC14 | AT91C_PIO_PC15);
-         pRegister = (int *)0xFFFFF830; // Set data
--        *pRegister = 0x1400;
-+        *pRegister = AT91C_PIO_PC7 | AT91C_PIO_PC15;
-         pRegister = (int *)0xFFFFF834; // Clear bits
--        *pRegister = 0x2800;
-+        *pRegister = AT91C_PIO_PC8 | AT91C_PIO_PC14;
- }
- */
- 
-+
- void AT91F_StartUboot(unsigned int dummy, void *pvoid)
- {
--  //printf("Load U-BOOT from dataflash[%x] to SDRAM[%x]\n\r", AT91C_UBOOT_DATAFLASH_ADDR, AT91C_UBOOT_ADDR);
-   read_dataflash(AT91C_UBOOT_DATAFLASH_ADDR, AT91C_UBOOT_SIZE, (char *)(AT91C_UBOOT_ADDR));
-   //printf("Set PLLA to 180Mhz and Master clock to 60Mhz and start U-BOOT\n\r");
-   //* Reset registers
-@@ -337,6 +355,67 @@
-   while(1);
- }
- 
-+#define AT91C_MCI_TIMEOUT 1000000
-+
-+extern AT91S_MciDevice MCI_Device;
-+
-+extern void AT91F_MCIDeviceWaitReady(unsigned int);
-+extern int AT91F_MCI_ReadBlockSwab(AT91PS_MciDevice, int, unsigned int *, int);
-+
-+
-+int Program_From_MCI(void)
-+{
-+	int i;
-+	unsigned int Max_Read_DataBlock_Length;
-+	int block = 0;
-+	int buffer = AT91C_DOWNLOAD_BASE_ADDRESS;
-+	int bufpos = AT91C_DOWNLOAD_BASE_ADDRESS;
-+	int NbPage = 0;
-+	struct trx_header *p;
-+	unsigned int data;
-+
-+	p = (struct trx_header *)bufpos;
-+
-+	Max_Read_DataBlock_Length = MCI_Device.pMCI_DeviceFeatures->Max_Read_DataBlock_Length;
-+
-+	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
-+
-+	AT91F_MCI_ReadBlockSwab(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length);
-+
-+	if (p->magic != TRX_MAGIC)
-+		return FALSE;
-+
-+	printf("Read SD-Card\n\r");
-+	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15 | AT91C_PIO_PC8 | AT91C_PIO_PC14;
-+	for (i=0; i<(p->len/512); i++) {
-+		AT91F_MCI_ReadBlockSwab(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length);
-+		block++;
-+		bufpos += Max_Read_DataBlock_Length;
-+		}
-+
-+	NbPage = 0;
-+	i = dataflash_info[0].Device.pages_number;
-+	while(i >>= 1)
-+		NbPage++;
-+	i = ((p->offsets[1] - p->offsets[0])/ 512) + 1 + (NbPage << 13) + (dataflash_info[0].Device.pages_size << 17);
-+	*(int *)(buffer + p->offsets[0] + AT91C_OFFSET_VECT6) = i;
-+
-+	printf("Write romboot\n\r");
-+	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15 | AT91C_PIO_PC14;
-+	AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC8;
-+	write_dataflash(0xc0000000, buffer + p->offsets[0], p->offsets[1] - p->offsets[0]);
-+	printf("Write u-boot\n\r");
-+	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15;
-+	AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC8 | AT91C_PIO_PC14;
-+	write_dataflash(0xc0008000, buffer + p->offsets[1], p->offsets[2] - p->offsets[1]);
-+	printf("Write knl/root\n\r");
-+	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC8 | AT91C_PIO_PC15;
-+	AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC7 | AT91C_PIO_PC14;
-+	write_dataflash(0xc0042000, buffer + p->offsets[2], p->len - p->offsets[2]);
-+	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC8 | AT91C_PIO_PC14;
-+	AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC7 | AT91C_PIO_PC15;
-+	return TRUE;
-+	}
- 
- //*----------------------------------------------------------------------------
- //* Function Name       : main
-@@ -357,6 +436,7 @@
-   unsigned int crc1 = 0, crc2 = 0;
-   volatile int device;
-   int NbPage;
-+	int mci_present;
- 
-   stdin = fopen(0, at91_dbgu_getc);
-   stdout = fopen(at91_dbgu_putc, 0);
-@@ -387,6 +467,15 @@
-   
-   //	DataFlash on SPI Configuration
-   AT91F_DataflashInit ();
-+	AT91F_DisplayIntro();
-+	mci_present = AT91F_MCI_Init();
-+
-+#ifdef PRODTEST
-+	if (mci_present) {
-+		Program_From_MCI();
-+ 		AT91F_StartUboot(0, (void *)0);
-+		}
-+#endif
- 
-   // start tempo to start Uboot in a delay of 1 sec if no key pressed
-   svcUbootTempo.Start(&svcUbootTempo, 1000, 0, AT91F_StartUboot, (void *)0);
-@@ -396,7 +485,7 @@
- 
-   // stop tempo
-   svcUbootTempo.Stop(&svcUbootTempo);
--  
-+
- 	while(1) {
- 		while(command == 0) {
- 	 		AddressToDownload = AT91C_DOWNLOAD_BASE_ADDRESS;
-@@ -444,7 +533,8 @@
- #endif
- 	
- 				case '3':
--					mci_main();
-+					if (mci_present)
-+						Program_From_MCI();
- 					command=0;
- 					break;
- 
-@@ -461,7 +551,6 @@
- 	  				*i = 0;
-       		}
-       		write_dataflash(0xc0000000, 0x20000000, 0x4000);
--      		printf("BL CLR\r\n");
-       		command = 0;
-       		break;
- 	    
-diff -urN romboot.old/main.h romboot/main.h
---- romboot.old/main.h	2007-03-24 13:34:19.000000000 +0100
-+++ romboot/main.h	2007-03-23 19:06:52.000000000 +0100
-@@ -27,7 +27,7 @@
- 
- #define AT91C_OFFSET_VECT6              0x14        //* Offset for ARM vector 6
- 
--#define AT91C_VERSION   "VER 1.02"
-+#define AT91C_VERSION   "VER 1.03"
- // Global variables and functions definition
- extern unsigned int GetTickCount(void);
- #endif
-diff -urN romboot.old/Makefile romboot/Makefile
---- romboot.old/Makefile	2007-03-24 13:34:19.000000000 +0100
-+++ romboot/Makefile	2007-03-24 10:45:38.000000000 +0100
-@@ -1,12 +1,17 @@
- LINKFLAGS= -T elf32-littlearm.lds -Ttext 0
- COMPILEFLAGS= -Os
- TARGET=romboot
-+TARGET2=rbptest
-+
- OBJFILES=cstartup_ram.o asm_isr.o asm_mci_isr.o jump.o at45.o com.o dataflash.o \
--	mci_device.o mci_main.o init.o main.o stdio.o _udivsi3.o _umodsi3.o div0.o
-+	mci_device.o init.o main.o stdio.o _udivsi3.o _umodsi3.o div0.o
-+OBJFILES2=cstartup_ram.o asm_isr.o asm_mci_isr.o jump.o at45.o com.o dataflash.o \
-+	mci_device.o init.o ptmain.o stdio.o _udivsi3.o _umodsi3.o div0.o
-+
- LIBRARIES=
- INCLUDES= -Iinclude
- 
--all:$(TARGET)
-+all:$(TARGET) $(TARGET2)
- 
- $(TARGET): $(OBJFILES)
- 	$(LD) $(OBJFILES) -o $(TARGET).out $(LINKFLAGS) -n
-@@ -14,6 +19,12 @@
- 	$(OBJDUMP) -h -s $(TARGET).out > $(TARGET).lss
- 	$(NM) -n $(TARGET).out | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $(TARGET).map
- 
-+$(TARGET2): $(OBJFILES2)
-+	$(LD) $(OBJFILES2) -o $(TARGET2).out $(LINKFLAGS) -n
-+	$(OBJCOPY) $(TARGET2).out -O binary $(TARGET2).bin
-+	$(OBJDUMP) -h -s $(TARGET2).out > $(TARGET2).lss
-+	$(NM) -n $(TARGET2).out | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $(TARGET2).map
-+
- asm_isr.o: asm_isr.S
- 	$(CC) -c -Iinclude -o $@ $<
- 
-@@ -32,6 +43,12 @@
- _umodsi3.o: _umodsi3.S
- 	$(CC) -c $<
- 
-+main.o: main.cpp
-+	$(CC) -c $(COMPILEFLAGS) $(INCLUDES) -o main.o $<
-+
-+ptmain.o: main.cpp
-+	$(CC) -c $(COMPILEFLAGS) $(INCLUDES) -D PRODTEST -o ptmain.o $<
-+
- #%.o: %.S
- #	$(CC) -c $(INCLUDES) -o $@ $<
- 
-diff -urN romboot.old/mci_device.cpp romboot/mci_device.cpp
---- romboot.old/mci_device.cpp	2007-03-24 13:34:19.000000000 +0100
-+++ romboot/mci_device.cpp	2007-03-24 11:23:38.000000000 +0100
-@@ -16,14 +16,28 @@
- #include <AT91C_MCI_Device.h>
- #include "com.h"
- 
--#define ENABLE_WRITE 1
-+#define AT91C_MCI_TIMEOUT			1000000   /* For AT91F_MCIDeviceWaitReady */
-+#define BUFFER_SIZE_MCI_DEVICE		512
-+#define MASTER_CLOCK				60000000
-+#define FALSE						0
-+#define TRUE						1
-+
-+//* External Functions
-+extern "C" void AT91F_ASM_MCI_Handler(void);
-+extern "C" void AT91F_MCI_Device_Handler(AT91PS_MciDevice,unsigned int);
-+//* Global Variables
-+AT91S_MciDeviceFeatures			MCI_Device_Features;
-+AT91S_MciDeviceDesc				MCI_Device_Desc;
-+AT91S_MciDevice					MCI_Device;
-+
-+#undef ENABLE_WRITE
- #undef MMC
- 
- //*----------------------------------------------------------------------------
- //* \fn    AT91F_MCI_SendCommand
- //* \brief Generic function to send a command to the MMC or SDCard
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_SendCommand (
-+int AT91F_MCI_SendCommand (
- 	AT91PS_MciDevice pMCI_Device,
- 	unsigned int Cmd,
- 	unsigned int Arg)
-@@ -63,7 +77,7 @@
- //* \fn    AT91F_MCI_SDCard_SendAppCommand
- //* \brief Specific function to send a specific command to the SDCard
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_SDCard_SendAppCommand (
-+int AT91F_MCI_SDCard_SendAppCommand (
- 	AT91PS_MciDevice pMCI_Device,
- 	unsigned int Cmd_App,
- 	unsigned int Arg	)
-@@ -98,7 +112,7 @@
- //* \fn    AT91F_MCI_GetStatus
- //* \brief Addressed card sends its status register
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_GetStatus(AT91PS_MciDevice pMCI_Device,unsigned int relative_card_address)
-+int AT91F_MCI_GetStatus(AT91PS_MciDevice pMCI_Device,unsigned int relative_card_address)
- {
- 	if (AT91F_MCI_SendCommand(pMCI_Device,
- 								AT91C_SEND_STATUS_CMD,
-@@ -139,10 +153,25 @@
- }
- 
- //*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_Handler
-+//* \brief MCI Handler
-+//*----------------------------------------------------------------------------
-+extern "C" void AT91F_MCI_Handler(void);
-+
-+void AT91F_MCI_Handler(void)
-+{
-+	int status;
-+
-+	status = ( AT91C_BASE_MCI->MCI_SR & AT91C_BASE_MCI->MCI_IMR );
-+
-+	AT91F_MCI_Device_Handler(&MCI_Device,status);
-+}
-+
-+//*----------------------------------------------------------------------------
- //* \fn    AT91F_MCI_ReadBlock
- //* \brief Read an ENTIRE block or PARTIAL block
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_ReadBlock(
-+int AT91F_MCI_ReadBlock(
- 	AT91PS_MciDevice pMCI_Device,
- 	int src,
- 	unsigned int *dataBuffer,
-@@ -205,7 +234,7 @@
- //* \fn    AT91F_MCI_WriteBlock
- //* \brief  Write an ENTIRE block but not always PARTIAL block !!!
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_WriteBlock(
-+int AT91F_MCI_WriteBlock(
- 	AT91PS_MciDevice pMCI_Device,
- 	int dest,
- 	unsigned int *dataBuffer,
-@@ -268,7 +297,7 @@
- //* \fn    AT91F_MCI_MMC_SelectCard
- //* \brief Toggles a card between the Stand_by and Transfer states or between Programming and Disconnect states
- //*------------------------------------------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_MMC_SelectCard(AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address)
-+int AT91F_MCI_MMC_SelectCard(AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address)
- {
-     int status;
- 	
-@@ -302,7 +331,7 @@
- //* \fn    AT91F_MCI_GetCSD
- //* \brief Asks to the specified card to send its CSD
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_GetCSD (AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address , unsigned int * response)
-+int AT91F_MCI_GetCSD (AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address , unsigned int * response)
- {
-  	
-  	if(AT91F_MCI_SendCommand(pMCI_Device,
-@@ -322,7 +351,7 @@
- //* \fn    AT91F_MCI_SetBlocklength
- //* \brief Select a block length for all following block commands (R/W)
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_SetBlocklength(AT91PS_MciDevice pMCI_Device,unsigned int length)
-+int AT91F_MCI_SetBlocklength(AT91PS_MciDevice pMCI_Device,unsigned int length)
- {
-     return( AT91F_MCI_SendCommand(pMCI_Device, AT91C_SET_BLOCKLEN_CMD, length) );
- }
-@@ -332,7 +361,7 @@
- //* \fn    AT91F_MCI_MMC_GetAllOCR
- //* \brief Asks to all cards to send their operations conditions
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_MMC_GetAllOCR (AT91PS_MciDevice pMCI_Device)
-+int AT91F_MCI_MMC_GetAllOCR (AT91PS_MciDevice pMCI_Device)
- {
- 	unsigned int	response =0x0;
-  	
-@@ -357,7 +386,7 @@
- //* \fn    AT91F_MCI_MMC_GetAllCID
- //* \brief Asks to the MMC on the chosen slot to send its CID
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_MMC_GetAllCID (AT91PS_MciDevice pMCI_Device, unsigned int *response)
-+int AT91F_MCI_MMC_GetAllCID (AT91PS_MciDevice pMCI_Device, unsigned int *response)
- {
- 	int Nb_Cards_Found=-1;
-   
-@@ -391,7 +420,7 @@
- //* \fn    AT91F_MCI_MMC_Init
- //* \brief Return the MMC initialisation status
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_MMC_Init (AT91PS_MciDevice pMCI_Device)
-+int AT91F_MCI_MMC_Init (AT91PS_MciDevice pMCI_Device)
- {
-     unsigned int	tab_response[4];
- 	unsigned int	mult,blocknr;
-@@ -454,7 +483,7 @@
- //* \fn    AT91F_MCI_SDCard_GetOCR
- //* \brief Asks to all cards to send their operations conditions
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_SDCard_GetOCR (AT91PS_MciDevice pMCI_Device)
-+int AT91F_MCI_SDCard_GetOCR (AT91PS_MciDevice pMCI_Device)
- {
- 	unsigned int	response =0x0;
- 
-@@ -479,7 +508,7 @@
- //* \fn    AT91F_MCI_SDCard_GetCID
- //* \brief Asks to the SDCard on the chosen slot to send its CID
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_SDCard_GetCID (AT91PS_MciDevice pMCI_Device, unsigned int *response)
-+int AT91F_MCI_SDCard_GetCID (AT91PS_MciDevice pMCI_Device, unsigned int *response)
- {
-  	if(AT91F_MCI_SendCommand(pMCI_Device,
- 							AT91C_ALL_SEND_CID_CMD,
-@@ -498,7 +527,7 @@
- //* \fn    AT91F_MCI_SDCard_SetBusWidth
- //* \brief  Set bus width for SDCard
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_SDCard_SetBusWidth(AT91PS_MciDevice pMCI_Device)
-+int AT91F_MCI_SDCard_SetBusWidth(AT91PS_MciDevice pMCI_Device)
- {
- 	volatile int	ret_value;
- 	char			bus_width;
-@@ -529,7 +558,7 @@
- //* \fn    AT91F_MCI_SDCard_Init
- //* \brief Return the SDCard initialisation status
- //*----------------------------------------------------------------------------
--AT91S_MCIDeviceStatus AT91F_MCI_SDCard_Init (AT91PS_MciDevice pMCI_Device)
-+int AT91F_MCI_SDCard_Init (AT91PS_MciDevice pMCI_Device)
- {
-     unsigned int	tab_response[4];
- 	unsigned int	mult,blocknr;
-@@ -567,7 +596,7 @@
- 
- 					pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity =  pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length * blocknr;
- 			  	//// End of Compute Memory Capacity
--					printf("BLK 0x%x", pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length);
-+					printf("SD-Card: %d Bytes\n\r", pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity);
- 
- 		  		if( AT91F_MCI_SDCard_SetBusWidth(pMCI_Device) == AT91C_CMD_SEND_OK )
- 				{	
-@@ -579,3 +608,141 @@
- 	}
-     return AT91C_INIT_ERROR;
- }
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_CfgDevice
-+//* \brief This function is used to initialise MMC or SDCard Features
-+//*----------------------------------------------------------------------------
-+void AT91F_CfgDevice(void)
-+{
-+	// Init Device Structure
-+
-+	MCI_Device_Features.Relative_Card_Address 		= 0;
-+	MCI_Device_Features.Card_Inserted 				= AT91C_CARD_REMOVED;
-+	MCI_Device_Features.Max_Read_DataBlock_Length	= 0;
-+	MCI_Device_Features.Max_Write_DataBlock_Length 	= 0;
-+	MCI_Device_Features.Read_Partial 				= 0;
-+	MCI_Device_Features.Write_Partial 				= 0;
-+	MCI_Device_Features.Erase_Block_Enable 			= 0;
-+	MCI_Device_Features.Sector_Size 				= 0;
-+	MCI_Device_Features.Memory_Capacity 			= 0;
-+	
-+	MCI_Device_Desc.state							= AT91C_MCI_IDLE;
-+	MCI_Device_Desc.SDCard_bus_width				= AT91C_MCI_SCDBUS;
-+	
-+	// Init AT91S_DataFlash Global Structure, by default AT45DB choosen !!!
-+	MCI_Device.pMCI_DeviceDesc 		= &MCI_Device_Desc;
-+	MCI_Device.pMCI_DeviceFeatures 	= &MCI_Device_Features;
-+
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCI_Init
-+//* \brief Initialsise Card
-+//*----------------------------------------------------------------------------
-+int AT91F_MCI_Init(void)
-+{
-+
-+///////////////////////////////////////////////////////////////////////////////////////////
-+//  MCI Init : common to MMC and SDCard
-+///////////////////////////////////////////////////////////////////////////////////////////
-+
-+    // Set up PIO SDC_TYPE to switch on MMC/SDCard and not DataFlash Card
-+	AT91F_PIO_CfgOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7);
-+	AT91F_PIO_SetOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7);
-+	
-+	// Init MCI for MMC and SDCard interface
-+	AT91F_MCI_CfgPIO();	
-+	AT91F_MCI_CfgPMC();
-+	AT91F_PDC_Open(AT91C_BASE_PDC_MCI);
-+
-+    // Disable all the interrupts
-+    AT91C_BASE_MCI->MCI_IDR = 0xFFFFFFFF;
-+
-+	// Init MCI Device Structures
-+	AT91F_CfgDevice();
-+
-+	// Configure MCI interrupt 
-+	AT91F_AIC_ConfigureIt(AT91C_BASE_AIC,
-+						 AT91C_ID_MCI,
-+						 AT91C_AIC_PRIOR_HIGHEST,
-+						 AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE,
-+						 AT91F_ASM_MCI_Handler);
-+
-+	// Enable MCI interrupt
-+	AT91F_AIC_EnableIt(AT91C_BASE_AIC,AT91C_ID_MCI);
-+
-+	// Enable Receiver
-+	AT91F_US_EnableRx((AT91PS_USART) AT91C_BASE_DBGU);
-+
-+	AT91F_MCI_Configure(AT91C_BASE_MCI,
-+						AT91C_MCI_DTOR_1MEGA_CYCLES,
-+						AT91C_MCI_MR_PDCMODE,			// 15MHz for MCK = 60MHz (CLKDIV = 1)
-+						AT91C_MCI_SDCARD_4BITS_SLOTA);
-+	
-+	if(AT91F_MCI_SDCard_Init(&MCI_Device) != AT91C_INIT_OK)
-+		return FALSE;
-+	else
-+		return TRUE;
-+
-+}
-+
-+//*----------------------------------------------------------------------------
-+//* \fn    AT91F_MCIDeviceWaitReady
-+//* \brief Wait for MCI Device ready
-+//*----------------------------------------------------------------------------
-+void AT91F_MCIDeviceWaitReady(unsigned int timeout)
-+{
-+	volatile int status;
-+	
-+	do
-+	{
-+		status = AT91C_BASE_MCI->MCI_SR;
-+		timeout--;
-+	}
-+	while( !(status & AT91C_MCI_NOTBUSY)  && (timeout>0) );	
-+}
-+
-+unsigned int swab32(unsigned int data)
-+{
-+	unsigned int res = 0;
-+
-+	res = (data & 0x000000ff) << 24 |
-+				(data & 0x0000ff00) << 8  |
-+				(data & 0x00ff0000) >> 8  |
-+				(data & 0xff000000) >> 24;
-+
-+	return res;
-+}
-+
-+//*--------------------------------------------------------------------
-+//* \fn    AT91F_MCI_ReadBlockSwab
-+//* \brief Read Block and swap byte order
-+//*--------------------------------------------------------------------
-+int AT91F_MCI_ReadBlockSwab(
-+	AT91PS_MciDevice pMCI_Device,
-+	int src,
-+	unsigned int *databuffer,
-+	int sizeToRead)
-+{
-+	int i;
-+	unsigned char *buf = (unsigned char *)databuffer;
-+
-+	//* Read Block 1
-+	for(i=0;i<BUFFER_SIZE_MCI_DEVICE;i++)
-+		*buf++ = 0x00;	
-+	AT91F_MCI_ReadBlock(&MCI_Device,src,databuffer,sizeToRead);
-+
-+	//* Wait end of Read
-+	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
-+
-+	{
-+		int index;
-+		unsigned int *uiBuffer = databuffer;
-+
-+		for(index = 0; index < 512/4; index++)
-+			uiBuffer[index] = swab32(uiBuffer[index]);
-+	}
-+	return(1);
-+}
-+
-diff -urN romboot.old/mci_main.cpp romboot/mci_main.cpp
---- romboot.old/mci_main.cpp	2007-03-24 13:34:19.000000000 +0100
-+++ romboot/mci_main.cpp	1970-01-01 01:00:00.000000000 +0100
-@@ -1,317 +0,0 @@
--//*----------------------------------------------------------------------------
--//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
--//*----------------------------------------------------------------------------
--//* The software is delivered "AS IS" without warranty or condition of any
--//* kind, either express, implied or statutory. This includes without
--//* limitation any warranty or condition with respect to merchantability or
--//* fitness for any particular purpose, or against the infringements of
--//* intellectual property rights of others.
--//*----------------------------------------------------------------------------
--//* File Name           : main.c
--//* Object              : main application written in C
--//* Creation            : FB   21/11/2002
--//*
--//*----------------------------------------------------------------------------
--#include "com.h"
--#include "dataflash.h"
--#include <AT91C_MCI_Device.h>
--
--#define AT91C_MCI_TIMEOUT			1000000   /* For AT91F_MCIDeviceWaitReady */
--#define BUFFER_SIZE_MCI_DEVICE		512
--#define MASTER_CLOCK				60000000
--#define FALSE						-1
--#define TRUE						1
--
--//* External Functions
--extern "C" void AT91F_ASM_MCI_Handler(void);
--extern "C" void AT91F_MCI_Device_Handler(AT91PS_MciDevice,unsigned int);
--extern AT91S_MCIDeviceStatus 	AT91F_MCI_SDCard_Init (AT91PS_MciDevice);
--extern AT91S_MCIDeviceStatus 	AT91F_MCI_SetBlocklength(AT91PS_MciDevice,unsigned int);
--extern AT91S_MCIDeviceStatus 	AT91F_MCI_ReadBlock(AT91PS_MciDevice,int,unsigned int *,int);
--extern AT91S_MCIDeviceStatus 	AT91F_MCI_WriteBlock(AT91PS_MciDevice,int,unsigned int *,int);
--//* Global Variables
--AT91S_MciDeviceFeatures			MCI_Device_Features;
--AT91S_MciDeviceDesc				MCI_Device_Desc;
--AT91S_MciDevice					MCI_Device;
--
--unsigned int dlBuffer = 0x20000000;
--#undef MCI_TEST
--#ifdef MCI_TEST
--char TestString[] = "\r\nHello Hamish\r\n";
--#endif
--
--//*----------------------------------------------------------------------------
--//* \fn    AT91F_MCIDeviceWaitReady
--//* \brief Wait for MCI Device ready
--//*----------------------------------------------------------------------------
--void AT91F_MCIDeviceWaitReady(unsigned int timeout)
--{
--	volatile int status;
--	
--	do
--	{
--		status = AT91C_BASE_MCI->MCI_SR;
--		timeout--;
--	}
--	while( !(status & AT91C_MCI_NOTBUSY)  && (timeout>0) );	
--}
--
--unsigned int swab32(unsigned int data)
--{
--	unsigned int res = 0;
--
--	res = (data & 0x000000ff) << 24 |
--				(data & 0x0000ff00) << 8  |
--				(data & 0x00ff0000) >> 8  |
--				(data & 0xff000000) >> 24;
--
--	return res;
--}
--
--AT91S_MCIDeviceStatus readblock(
--	AT91PS_MciDevice pMCI_Device,
--	int src,
--	unsigned int *databuffer,
--	int sizeToRead)
--{
--	int i;
--	unsigned char *buf = (unsigned char *)databuffer;
--
--	//* Read Block 1
--	for(i=0;i<BUFFER_SIZE_MCI_DEVICE;i++)
--		*buf++ = 0x00;	
--	AT91F_MCI_ReadBlock(&MCI_Device,src,databuffer,sizeToRead);
--
--	//* Wait end of Read
--	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
--
--	{
--		int index;
--		unsigned int *uiBuffer = databuffer;
--
--		for(index = 0; index < 512/4; index++)
--			uiBuffer[index] = swab32(uiBuffer[index]);
--	}
--	return(1);
--}
--
--#if 0
--void printdata(unsigned int bufpos)
--	{
--		unsigned int *uip;
--		int linebytes = 16;
--		int nbytes = 64;
--		int size = 4;
--		int i;
--
--		uip = (unsigned int *)bufpos;
--
--		do {
--
--			for(i=0; i<linebytes; i+=size) {
--				printf(" %08x", *uip++);
--				}
--			
--			printf("\n\r");
--			nbytes -= linebytes;
--		} while (nbytes > 0);
--	}
--#endif
--//extern char message[40];
--
--int notnull(int bufpos, unsigned int len)
--{
--	int i;
--	unsigned char * bp = (unsigned char *)bufpos;
--
--	for (i=0; i<len; i++)
--		if (bp[i] != '\0')
--			return(1);
--
--	return(0);
--}
--//*----------------------------------------------------------------------------
--//* \fn    AT91F_Test
--//* \brief Test Functions
--//*----------------------------------------------------------------------------
--int AT91F_Test(void)
--{
--	int i;
--	unsigned int Max_Read_DataBlock_Length;
--	int block = 0;
--	int bufpos = dlBuffer;
--	int lastvalid = 0;
--	int NbPage = 0;
--
--		
--	Max_Read_DataBlock_Length = MCI_Device.pMCI_DeviceFeatures->Max_Read_DataBlock_Length;
--	
--	//* ReadBlock & WriteBlock Test -> Entire Block
--
--	//* Wait MCI Device Ready
--	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
--
--#ifdef MCI_TEST
--	//* Read Block 1
--	for(i=0;i<BUFFER_SIZE_MCI_DEVICE;i++) 	Buffer[i] = 0x00;	
--	AT91F_MCI_ReadBlock(&MCI_Device,(1*Max_Read_DataBlock_Length),(unsigned int*) Buffer,Max_Read_DataBlock_Length);
--
--	//* Wait end of Read
--	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
--
--	// Write Page 1
--//    sprintf(Buffer,"\n\rThis sentence is written in your device... Congratulations\n\r");
--	for(i=0; i<16; i++)
--		Buffer[i] = TestString[i];
--	AT91F_MCI_WriteBlock(&MCI_Device,(1*Max_Read_DataBlock_Length),(unsigned int*) Buffer,Max_Read_DataBlock_Length);
--
--	//* Wait end of Write
--	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
--#endif
--
--	for(i=0; i<64; i++) {
--		readblock(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length);
--		if (notnull(bufpos, Max_Read_DataBlock_Length))
--			lastvalid++;
--		block++;
--		bufpos += 512;
--		}
--
--	i = dataflash_info[0].Device.pages_number;
--	while(i>>=1)
--		NbPage++;
--	i = lastvalid + (NbPage << 13) + (dataflash_info[0].Device.pages_size << 17);
--	*(int *)(dlBuffer + 0x14) = i;
--
--	for(i=0; i<4688; i++) {
--		readblock(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length);
--		block++;
--		bufpos += 512;
--		}
--	write_dataflash(0xc0000000, dlBuffer, 512 * block);
--	//* End Of Test
--	printf("DONE %d\n\r", lastvalid);
--			
--//	printf(Buffer);
--
--	return TRUE;
--}
--
--//*----------------------------------------------------------------------------
--//* \fn    AT91F_CfgDevice
--//* \brief This function is used to initialise MMC or SDCard Features
--//*----------------------------------------------------------------------------
--void AT91F_CfgDevice(void)
--{
--	// Init Device Structure
--
--	MCI_Device_Features.Relative_Card_Address 		= 0;
--	MCI_Device_Features.Card_Inserted 				= AT91C_CARD_REMOVED;
--	MCI_Device_Features.Max_Read_DataBlock_Length	= 0;
--	MCI_Device_Features.Max_Write_DataBlock_Length 	= 0;
--	MCI_Device_Features.Read_Partial 				= 0;
--	MCI_Device_Features.Write_Partial 				= 0;
--	MCI_Device_Features.Erase_Block_Enable 			= 0;
--	MCI_Device_Features.Sector_Size 				= 0;
--	MCI_Device_Features.Memory_Capacity 			= 0;
--	
--	MCI_Device_Desc.state							= AT91C_MCI_IDLE;
--	MCI_Device_Desc.SDCard_bus_width				= AT91C_MCI_SCDBUS;
--	
--	// Init AT91S_DataFlash Global Structure, by default AT45DB choosen !!!
--	MCI_Device.pMCI_DeviceDesc 		= &MCI_Device_Desc;
--	MCI_Device.pMCI_DeviceFeatures 	= &MCI_Device_Features;
--
--}
--
--//*----------------------------------------------------------------------------
--//* \fn    AT91F_Test_SDCard
--//* \brief Configure MCI for SDCard and complete SDCard init, then jump to Test Functions
--//*----------------------------------------------------------------------------
--int AT91F_Test_SDCard(void)
--{
--	//////////////////////////////////////////////////////////
--	//* For SDCard Init
--	//////////////////////////////////////////////////////////
--
--	AT91F_MCI_Configure(AT91C_BASE_MCI,
--						AT91C_MCI_DTOR_1MEGA_CYCLES,
--						AT91C_MCI_MR_PDCMODE,			// 15MHz for MCK = 60MHz (CLKDIV = 1)
--						AT91C_MCI_SDCARD_4BITS_SLOTA);
--	
--	if(AT91F_MCI_SDCard_Init(&MCI_Device) != AT91C_INIT_OK)
--		return FALSE;
--
--	printf("\n\rINI OK: TST\n\r");
--
--	// Enter Main Tests	
--	return(AT91F_Test());
--}
--
--//*----------------------------------------------------------------------------
--//* \fn    AT91F_MCI_Handler
--//* \brief MCI Handler
--//*----------------------------------------------------------------------------
--extern "C" void AT91F_MCI_Handler(void);
--
--void AT91F_MCI_Handler(void)
--{
--	int status;
--
--	status = ( AT91C_BASE_MCI->MCI_SR & AT91C_BASE_MCI->MCI_IMR );
--
--	AT91F_MCI_Device_Handler(&MCI_Device,status);
--}
--
--//*----------------------------------------------------------------------------
--//* \fn    main
--//* \brief main function
--//*----------------------------------------------------------------------------
--int mci_main(void)
--{
--//	printf("MCI Test\n\r");
--
--///////////////////////////////////////////////////////////////////////////////////////////
--//  MCI Init : common to MMC and SDCard
--///////////////////////////////////////////////////////////////////////////////////////////
--
--//	printf("\n\rInit MCI Interface\n\r");
--
--    // Set up PIO SDC_TYPE to switch on MMC/SDCard and not DataFlash Card
--	AT91F_PIO_CfgOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7);
--	AT91F_PIO_SetOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7);
--	
--	// Init MCI for MMC and SDCard interface
--	AT91F_MCI_CfgPIO();	
--	AT91F_MCI_CfgPMC();
--	AT91F_PDC_Open(AT91C_BASE_PDC_MCI);
--
--    // Disable all the interrupts
--    AT91C_BASE_MCI->MCI_IDR = 0xFFFFFFFF;
--
--	// Init MCI Device Structures
--	AT91F_CfgDevice();
--
--	// Configure MCI interrupt 
--	AT91F_AIC_ConfigureIt(AT91C_BASE_AIC,
--						 AT91C_ID_MCI,
--						 AT91C_AIC_PRIOR_HIGHEST,
--						 AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE,
--						 AT91F_ASM_MCI_Handler);
--
--	// Enable MCI interrupt
--	AT91F_AIC_EnableIt(AT91C_BASE_AIC,AT91C_ID_MCI);
--
--///////////////////////////////////////////////////////////////////////////////////////////
--//  Enter Test Menu
--///////////////////////////////////////////////////////////////////////////////////////////
--
--	// Enable Receiver
--	AT91F_US_EnableRx((AT91PS_USART) AT91C_BASE_DBGU);
--
--	if(AT91F_Test_SDCard() == TRUE)
--		printf("\n\rTST OK\n\r");
--	else
--		printf("\n\rTST Fail\n\r");
--	return(1);		
--}
diff --git a/target/linux/at91-2.6/image/romboot/patches/004-code-cleanup.patch b/target/linux/at91-2.6/image/romboot/patches/004-code-cleanup.patch
deleted file mode 100644
index 1a0f9c5..0000000
--- a/target/linux/at91-2.6/image/romboot/patches/004-code-cleanup.patch
+++ /dev/null
@@ -1,423 +0,0 @@
-diff -urN romboot.old/com.cpp romboot/com.cpp
---- romboot.old/com.cpp	2004-07-04 21:37:05.000000000 +0200
-+++ romboot/com.cpp	2007-04-04 04:30:12.000000000 +0200
-@@ -27,7 +27,7 @@
- //*-----------------------------------------------------------------------------
- void AT91F_ClrScr(void)
- {
--  puts(CLRSCREEN);
-+  putstr(CLRSCREEN);
- }
- 
- 
-@@ -47,12 +47,12 @@
-   
-   if (*(--p) == '\t') {			/* will retype the whole line	*/
-     while (*colp > plen) {
--      puts(erase_seq);
-+      putstr(erase_seq);
-       (*colp)--;
-     }
-     for (s=buffer; s<p; ++s) {
-       if (*s == '\t') {
--	puts(tab_seq+((*colp) & 07));
-+	putstr(tab_seq+((*colp) & 07));
- 	*colp += 8 - ((*colp) & 07);
-       } else {
- 	++(*colp);
-@@ -60,7 +60,7 @@
-       }
-     }
-   } else {
--    puts(erase_seq);
-+    putstr(erase_seq);
-     (*colp)--;
-   }
-   (*np)--;
-@@ -85,7 +85,7 @@
-   
-   /* print prompt */
-   if(prompt)
--    puts(prompt);
-+    putstr(prompt);
-   col = plen;
-   
-   for (;;)
-@@ -97,7 +97,7 @@
- 	case '\r':				/* Enter		*/
- 	case '\n':
- 	  *p = '\0';
--	  puts ("\r\n");
-+	  putstr ("\r\n");
- 	  return (p - console_buffer);
- 	  
- 	case 0x03:				/* ^C - break	*/
-@@ -107,7 +107,7 @@
- 	case 0x15:				/* ^U - erase line	*/
- 	  while (col > plen)
- 	    {
--	      puts(erase_seq);
-+	      putstr(erase_seq);
- 	      --col;
- 	    }
- 	  p = console_buffer;
-@@ -152,7 +152,7 @@
- void AT91F_WaitKeyPressed(void)
- {
-   int c;
--  puts("Hit a Key!");	    	    	
-+  putstr("Hit a Key!");	    	    	
-   c = getc();
- }
- 
-diff -urN romboot.old/main.cpp romboot/main.cpp
---- romboot.old/main.cpp	2007-04-03 12:12:33.000000000 +0200
-+++ romboot/main.cpp	2007-04-04 05:56:39.000000000 +0200
-@@ -382,8 +382,10 @@
- 
- 	AT91F_MCI_ReadBlockSwab(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length);
- 
--	if (p->magic != TRX_MAGIC)
-+	if (p->magic != TRX_MAGIC) {
-+		printf("Invalid Image 0x%08x\n\r");
- 		return FALSE;
-+		}
- 
- 	printf("Read SD-Card\n\r");
- 	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15 | AT91C_PIO_PC8 | AT91C_PIO_PC14;
-@@ -438,9 +440,6 @@
-   int NbPage;
- 	int mci_present;
- 
--  stdin = fopen(0, at91_dbgu_getc);
--  stdout = fopen(at91_dbgu_putc, 0);
--  
-   pAT91 = AT91C_ROM_BOOT_ADDRESS;
-   
-   // Tempo Initialisation
-@@ -472,16 +471,18 @@
- 
- #ifdef PRODTEST
- 	if (mci_present) {
--		Program_From_MCI();
-- 		AT91F_StartUboot(0, (void *)0);
-+		if (Program_From_MCI())
-+ 			AT91F_StartUboot(0, (void *)0);
- 		}
- #endif
- 
-   // start tempo to start Uboot in a delay of 1 sec if no key pressed
-   svcUbootTempo.Start(&svcUbootTempo, 1000, 0, AT91F_StartUboot, (void *)0);
- 
-+#ifndef PRODTEST
-   printf("press key\n\r");
-   getc();
-+#endif
- 
-   // stop tempo
-   svcUbootTempo.Stop(&svcUbootTempo);
-@@ -601,3 +602,10 @@
- 		AT91F_WaitKeyPressed();
- 		}
- 	}
-+
-+
-+int puts(const char *str)
-+{
-+	putstr(str);
-+	return 0;
-+}
-diff -urN romboot.old/stdio.cpp romboot/stdio.cpp
---- romboot.old/stdio.cpp	2004-07-04 22:36:10.000000000 +0200
-+++ romboot/stdio.cpp	2007-04-04 04:29:25.000000000 +0200
-@@ -1,117 +1,32 @@
- #include "stdio.h"
- 
- extern int at91_dbgu_putc(int ch);
-+extern int at91_dbgu_getc();
- 
--FILE *stdout = (FILE *)0;
--FILE *stdin = (FILE *)0;
--
--FILE __filedesc[FILEDESCS];
--
--FILE *fopen(int (*put)(int), int (*get)())
--{
--  static int init = 1;
--
--  if(init != 0)
--    {
--      for(int i = 0; i < FILEDESCS; i++)
--	{
--	  __filedesc[i].active = false;
--	  __filedesc[i].put = 0;
--	  __filedesc[i].get = 0;
--	}
--
--      init = 0;
--    }
--
--  for(int i = 0; i < FILEDESCS; i++)
--    {
--      if(!__filedesc[i].active)
--	{
--	  __filedesc[i].put = put;
--	  __filedesc[i].get = get;
--	  
--	  __filedesc[i].active = true;
--	
--	  return &__filedesc[i];
--	}      
--    }
--
--  return (FILE *)0;
--}
--      
--int fclose(FILE *fp)
-+int putstr(const char *str)
- {
--  for(int i = 0; i < FILEDESCS; i++)
--    if(&__filedesc[i] == fp || fp->active)
--      {
--	fp->active = false;
--
--	fp->put = 0;
--	fp->get = 0;
--
--	return 0;
--      }
--
--  return -1;
--}
--
--int fputs(const char *str, FILE *fp)
--{
--  if(fp == (FILE *)0)
--    return -1;
--
--  if(fp->put == (void *)0)
--    return -1;
--
--  while(*str != 0)
--    {
--      fp->put(*str);
--      str++;
--    }
-+	while (*str != 0)
-+		{
-+			putc(*str);
-+			str++;
-+		}
-   return 0;
- }
- 
--int fputc(int c, FILE *fp)
--{
--  if(fp == (FILE *)0)
--    return -1;
--
--  if(fp->put == (void *)0)
--    return -1;
--
--  return fp->put(c);
--}
--
--int fgetc(FILE *fp)
--{
--  if(fp == (FILE *)0)
--    return -1;
--
--  if(fp->get == (void *)0)
--    return -1;
--
--  return fp->get();
--}
--
--
--int puts(const char *str)
-+int putchar(int c)
- {
--  return fputs(str, stdout);
-+  return putc(c);
- }
- 
- int putc(int c)
- {
--  return fputc(c, stdout);
--}
--
--int putchar(int c)
--{
--  return fputc(c, stdout);
-+	at91_dbgu_putc(c);
-+  return 0;
- }
- 
- int getc()
- {
--  return fgetc(stdin);
-+  return at91_dbgu_getc();
- }
- 
- int strlen(const char *str)
-@@ -139,7 +54,7 @@
-         __res; \
- })
- 
--int number(FILE *fp, int num, int base, int size, int precision, int type)
-+int number(int num, int base, int size, int precision, int type)
- {
-   char c, sign, tmp[66];
-   const char *digits="0123456789abcdef";
-@@ -173,28 +88,28 @@
-   
-   if(!(type&(ZEROPAD+LEFT)))
-     while(size-->0)
--      fputc(' ', fp);
-+      putc(' ');
-   
-   if(sign)
--    fputc(sign, fp);
-+    putc(sign);
- 
-   if (!(type & LEFT))
-     while (size-- > 0)
--      fputc(c, fp);
-+      putc(c);
- 
-   while (i < precision--)
--    fputc('0', fp);
-+    putc('0');
-   
-   while (i-- > 0)
--    fputc(tmp[i], fp);
-+    putc(tmp[i]);
- 
-   while (size-- > 0)
--    fputc(' ', fp);;
-+    putc(' ');;
- 
-   return 1;
- }
- 
--int vfprintf(FILE *fp, const char *fmt, va_list va)
-+int vprintf(const char *fmt, va_list va)
- {
-   char *s;
- 
-@@ -231,33 +146,33 @@
-                 case 's' :
-                   s = va_arg(va, char *);
-                   if(!s)
--                    fputs("<NULL>", fp);
-+                    putstr("<NULL>");
-                   else
--                    fputs(s, fp);
-+                    putstr(s);
-                   done = true;
-                   break;
-                 case 'c' :
--                  fputc(va_arg(va, int), fp);
-+                  putc(va_arg(va, int));
-                   done = true;
-                   break;
-                 case 'd' :
--                  number(fp, va_arg(va, int), 10, 0, precision, type);
-+                  number(va_arg(va, int), 10, 0, precision, type);
-                   done = true;
-                   break;
-                 case 'x' :
--                  number(fp, va_arg(va, int), 16, 0, precision, type);
-+                  number(va_arg(va, int), 16, 0, precision, type);
-                   done = true;
-                   break;
-                 case 'X' :
--                  number(fp, va_arg(va, int), 16, 0, precision, type | LARGE);
-+                  number(va_arg(va, int), 16, 0, precision, type | LARGE);
-                   done = true;
-                   break;
-                 case '%' :
--                  fputc(*fmt, fp);
-+                  putc(*fmt);
-                   done = true;
-                 default: 
--                  fputc('%', fp);
--                  fputc(*fmt, fp);
-+                  putc('%');
-+                  putc(*fmt);
-                   done = true;
-                   break;
-                 }      
-@@ -265,7 +180,7 @@
-           while(!done);
-         }
-       else
--        fputc(*fmt, fp);
-+        putc(*fmt);
-       
-       fmt++;
-     }
-@@ -274,25 +189,13 @@
-   return 0;
- }
- 
--int fprintf(FILE *fp, const char *fmt, ...)
--{
--  va_list ap;
--  int i;
--
--  va_start(ap, fmt);
--  i = fprintf(fp, fmt, ap);
--  va_end(ap);  
--
--  return i;
--}
--
- int printf(const char *fmt, ...)
- {
-   va_list ap;
-   int i;
- 
-   va_start(ap, fmt);
--  i = vfprintf(stdout, fmt, ap);
-+  i = vprintf(fmt, ap);
-   va_end(ap);
- 
-   return i;
-diff -urN romboot.old/stdio.h romboot/stdio.h
---- romboot.old/stdio.h	2004-07-04 22:04:27.000000000 +0200
-+++ romboot/stdio.h	2007-04-04 04:29:48.000000000 +0200
-@@ -1,31 +1,12 @@
- #include <stdarg.h>
- 
--struct FILE
--{ 
--  bool active;
--  int (*put)(int);    /* function to write one char to device */
--  int (*get)();       /* function to read one char from device */
--};
--
--#define FILEDESCS 8
--
--FILE *fopen(int (*put)(int), int (*get)());
--int fclose(FILE *fp);
--
--int puts(const char *str);
-+int putstr(const char *str);
- int putc(int c);
- int putchar(int c);
- int getc();
- 
--int fputs(const char *str, FILE *fp);
--int fputc(int c, FILE *fp);
--int fgetc(FILE *fp);
- int strlen(const char *str);
- 
--int fprintf(FILE *fp, const char *fmt, ...);
--int vfprintf(FILE *fp, const char *fmt, va_list ap);
-+int vprintf(const char *fmt, va_list ap);
- 
- int printf(const char *fmt, ...);
--
--extern FILE *stdout;
--extern FILE *stdin;
diff --git a/target/linux/at91-2.6/image/romboot/patches/005-erase-flash.patch b/target/linux/at91-2.6/image/romboot/patches/005-erase-flash.patch
deleted file mode 100644
index b0ddfe3..0000000
--- a/target/linux/at91-2.6/image/romboot/patches/005-erase-flash.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- romboot.old/main.cpp	2007-04-05 15:51:51.000000000 +0200
-+++ romboot/main.cpp	2007-04-10 10:33:10.000000000 +0200
-@@ -34,7 +34,7 @@
- #define DELAY_MAIN_FREQ	1000
- #define DISP_LINE_LEN 16
- 
--#define COMPACT 1
-+//#define COMPACT 1
- 
- //* prototypes
- extern void AT91F_DBGU_Printk(char *);
-@@ -65,6 +65,7 @@
- 	"3: Copy SD-Card\n\r"
-   "4: Start U-BOOT\n\r"
-   "5: Clear bootloder\n\r"
-+	"6: Erase entire flash\n\r"
- };
- 
- //* Globales variables 
-@@ -555,6 +556,17 @@
-       		command = 0;
-       		break;
- 	    
-+    		case '6':
-+      		{
-+					int *i;
-+	
-+					for(i = (int *)0x20000000; i < (int *)0x20840000; i++)
-+	  				*i = 0;
-+      		}
-+      		write_dataflash(0xc0000000, 0x20000000, 0x840000);
-+      		command = 0;
-+      		break;
-+	    
- 				default:
-       		command = 0;
-       		break;
diff --git a/target/linux/at91-2.6/image/romboot/patches/006-erase-fixup.patch b/target/linux/at91-2.6/image/romboot/patches/006-erase-fixup.patch
deleted file mode 100644
index 26ac51f..0000000
--- a/target/linux/at91-2.6/image/romboot/patches/006-erase-fixup.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- romboot.old/main.cpp	2007-04-10 12:35:02.000000000 +0200
-+++ romboot/main.cpp	2007-04-10 12:35:15.000000000 +0200
-@@ -561,7 +561,7 @@
- 					int *i;
- 	
- 					for(i = (int *)0x20000000; i < (int *)0x20840000; i++)
--	  				*i = 0;
-+	  				*i = 0xffffffff;
-       		}
-       		write_dataflash(0xc0000000, 0x20000000, 0x840000);
-       		command = 0;