strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

SVN-Revision: 8653

48 files changed, 22117 insertions, 0 deletions

diff --git a/target/linux/at91/image/Config.in b/target/linux/at91/image/Config.in
new file mode 100644
index 0000000..6607f6c
--- /dev/null
+++ b/target/linux/at91/image/Config.in
@@ -0,0 +1,35 @@
+config AT91_DFBOOT
+	bool "Build dataflashboot loader"
+	depends LINUX_2_6_AT91
+	default y
+
+config AT91_UBOOT
+	bool "Build u-boot loader"
+	depends LINUX_2_6_AT91
+	default y
+
+config UBOOT_TARGET
+	string "U-Boot Board Configuration"
+	depends LINUX_2_6_AT91
+	depends AT91_UBOOT
+	default "vlink"
+	help
+	  For all supported boards there are ready-to-use default
+		configurations available; just type "<board_name>".
+
+config UBOOT_IPADDR
+	string "IP Address for U-Boot"
+	depends LINUX_2_6_AT91
+	depends AT91_UBOOT
+	default "192.168.0.178"
+	help
+	  IP address of device to be used in U-Boot
+
+config UBOOT_SERVERIP
+	string "IP Address of TFTP server"
+	depends LINUX_2_6_AT91
+	depends AT91_UBOOT
+	default "192.168.0.232"
+	help
+	  IP address of TFTP server for U-Boot
+
diff --git a/target/linux/at91/image/Makefile b/target/linux/at91/image/Makefile
new file mode 100644
index 0000000..7e855f0
--- /dev/null
+++ b/target/linux/at91/image/Makefile
@@ -0,0 +1,45 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Build/Clean
+	$(MAKE) -C dfboot clean
+	$(MAKE) -C u-boot clean
+endef
+
+define Build/Compile
+	$(MAKE) -C dfboot compile
+	$(MAKE) -C u-boot compile
+	$(KDIR)/u-boot-1.1.4/tools/ubparams
+	cp params $(KDIR)
+endef
+
+define Image/Prepare
+  cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage
+	cp $(KDIR)/dfboot/dfboot.bin $(KDIR)/dfboot.bin
+	cp $(KDIR)/dfboot/dfbptest.bin $(KDIR)/dfbptest.bin
+	cp $(KDIR)/u-boot-1.1.4/u-boot.bin $(KDIR)/u-boot.bin
+	dd if=$(KDIR)/u-boot.bin of=$(KDIR)/u-boot.block bs=100k count=1 conv=sync
+	cat $(KDIR)/u-boot.block $(KDIR)/params > $(KDIR)/u-boot.full
+endef
+
+define Image/BuildKernel
+	cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage
+endef
+
+define Image/Build
+	dd if=$(KDIR)/uImage of=$(KDIR)/uImage.block bs=8448 conv=sync
+	dd if=$(KDIR)/root.squashfs of=$(KDIR)/root.block bs=8448 conv=sync
+	cat $(KDIR)/uImage.block $(KDIR)/root.block > $(KDIR)/knlroot.bin
+	$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).trx -f $(KDIR)/dfboot.bin -f$(KDIR)/u-boot.full -f$(KDIR)/knlroot.bin
+	cp $(KDIR)/dfbptest.bin $(BIN_DIR)
+	$(call Image/Build/$(1),$(1))
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/at91/image/dfboot/Makefile b/target/linux/at91/image/dfboot/Makefile
new file mode 100644
index 0000000..355a4b5
--- /dev/null
+++ b/target/linux/at91/image/dfboot/Makefile
@@ -0,0 +1,35 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id$
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=dfboot
+PKG_VERSION:=0.1
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) \
+		$(TARGET_CONFIGURE_OPTS) \
+		CFLAGS="$(TARGET_CFLAGS)"
+endef
+
+define Build/InstallDev
+	dd if=$(PKG_BUILD_DIR)/binary/dfboot.bin of=$(PKG_BUILD_DIR)/binary/dfboot.block bs=32k count=1 conv=sync
+endef
+
+$(eval $(call Build/DefaultTargets))
diff --git a/target/linux/at91/image/dfboot/src/Makefile b/target/linux/at91/image/dfboot/src/Makefile
new file mode 100644
index 0000000..ff92e0d
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/Makefile
@@ -0,0 +1,94 @@
+# Makefile for DataFlashBoot.bin
+# Must use toolchain with H/W FLoating Point
+
+BASENAME=dfboot
+BINNAME=$(BASENAME).bin
+OUTNAME=$(BASENAME).out
+LSSNAME=$(BASENAME).lss
+MAPNAME=$(BASENAME).map
+
+BASENAME2=dfbptest
+BINNAME2=$(BASENAME2).bin
+OUTNAME2=$(BASENAME2).out
+LSSNAME2=$(BASENAME2).lss
+MAPNAME2=$(BASENAME2).map
+
+INCPATH=include
+
+CFLAGS_LOCAL=-Os -Wall -I$(INCPATH)
+BUILD=$(CC) $(CFLAGS) $(CFLAGS_LOCAL)
+
+LDFLAGS+=-T elf32-littlearm.lds -Ttext 0
+LINK=$(LD) $(LDFLAGS)
+
+OBJS=objs/cstartup_ram.o objs/at45.o objs/com.o objs/dataflash.o\
+	objs/div0.o objs/init.o objs/main.o objs/asm_isr.o objs/asm_mci_isr.o\
+	objs/mci_device.o objs/jump.o objs/_udivsi3.o objs/_umodsi3.o
+
+OBJS2=objs/cstartup_ram.o objs/at45.o objs/com.o objs/dataflash.o\
+	objs/div0.o objs/init.o objs/ptmain.o objs/asm_isr.o objs/asm_mci_isr.o\
+	objs/mci_device.o objs/jump.o objs/_udivsi3.o objs/_umodsi3.o
+
+I=config.h com.h dataflash.h embedded_services.h main.h stdio.h include/AT91RM9200.h include/lib_AT91RM9200.h 
+
+all:clean $(BASENAME) $(BASENAME2)
+
+$(BASENAME): $(OBJS)
+	$(LINK) -n -o $(OUTNAME) $(OBJS)
+	$(OBJCOPY) $(OUTNAME) -O binary $(BINNAME)
+	$(OBJDUMP) -h -s $(OUTNAME) > $(LSSNAME)
+	$(NM) -n $(OUTNAME) | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $(MAPNAME)
+	cp $(BINNAME) binary
+	
+$(BASENAME2): $(OBJS2)
+	$(LINK) -n -o $(OUTNAME2) $(OBJS2)
+	$(OBJCOPY) $(OUTNAME2) -O binary $(BINNAME2)
+	$(OBJDUMP) -h -s $(OUTNAME2) > $(LSSNAME2)
+	$(NM) -n $(OUTNAME2) | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $(MAPNAME2)
+	cp $(BINNAME2) binary
+	
+# C objects here
+objs/at45.o: at45.c	$(I)
+	$(BUILD) -c -o objs/at45.o		at45.c
+objs/com.o: com.c	$(I)
+	$(BUILD) -c -o objs/com.o		com.c
+objs/dataflash.o: dataflash.c	$(I)
+	$(BUILD) -c -o objs/dataflash.o		dataflash.c
+objs/mci_device.o: mci_device.c	$(I)
+	$(BUILD) -c -o objs/mci_device.o		mci_device.c
+objs/div0.o: div0.c	$(I)
+	$(BUILD) -c -o objs/div0.o		div0.c
+objs/init.o: init.c	$(I)
+	$(BUILD) -c -o objs/init.o		init.c
+objs/main.o: main.c	$(I)
+	$(BUILD) -c -o objs/main.o		main.c
+objs/ptmain.o: main.c	$(I)
+	$(BUILD) -c -D PRODTEST -o objs/ptmain.o		main.c
+
+# ASM objects here
+objs/asm_isr.o: asm_isr.S
+	$(BUILD) -c -o objs/asm_isr.o		asm_isr.S
+objs/asm_mci_isr.o: asm_mci_isr.S
+	$(BUILD) -c -o objs/asm_mci_isr.o		asm_mci_isr.S
+objs/cstartup_ram.o: cstartup_ram.S
+	$(BUILD) -c -o objs/cstartup_ram.o	cstartup_ram.S
+objs/jump.o: jump.S
+	$(BUILD) -c -o objs/jump.o		jump.S
+objs/_udivsi3.o: _udivsi3.S
+	$(BUILD) -c -o objs/_udivsi3.o		_udivsi3.S
+objs/_umodsi3.o: _umodsi3.S
+	$(BUILD) -c -o objs/_umodsi3.o 		_umodsi3.S
+
+install:	$(BINNAME) $(BINNAME2)
+	cp $(BINNAME) binary
+	cp $(BINNAME2) binary
+
+clean:
+	rm -f *~
+	rm -f objs/*
+	rm -f *.out
+	rm -f *.bin
+	rm -f *.lss
+	rm -f *.map
+	rm -f .unpacked
+	mkdir -p objs
diff --git a/target/linux/at91/image/dfboot/src/_udivsi3.S b/target/linux/at91/image/dfboot/src/_udivsi3.S
new file mode 100644
index 0000000..2cdcd48
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/_udivsi3.S
@@ -0,0 +1,77 @@
+/* # 1 "libgcc1.S" */
+@ libgcc1 routines for ARM cpu.
+@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk)
+dividend	.req	r0
+divisor		.req	r1
+result		.req	r2
+curbit		.req	r3
+/* ip		.req	r12	*/
+/* sp		.req	r13	*/
+/* lr		.req	r14	*/
+/* pc		.req	r15	*/
+	.text
+	.globl	 __udivsi3
+	.type  __udivsi3       ,function
+	.align	0
+ __udivsi3      :
+	cmp	divisor, #0
+	beq	Ldiv0
+	mov	curbit, #1
+	mov	result, #0
+	cmp	dividend, divisor
+	bcc	Lgot_result
+Loop1:
+	@ Unless the divisor is very big, shift it up in multiples of
+	@ four bits, since this is the amount of unwinding in the main
+	@ division loop.  Continue shifting until the divisor is
+	@ larger than the dividend.
+	cmp	divisor, #0x10000000
+	cmpcc	divisor, dividend
+	movcc	divisor, divisor, lsl #4
+	movcc	curbit, curbit, lsl #4
+	bcc	Loop1
+Lbignum:
+	@ For very big divisors, we must shift it a bit at a time, or
+	@ we will be in danger of overflowing.
+	cmp	divisor, #0x80000000
+	cmpcc	divisor, dividend
+	movcc	divisor, divisor, lsl #1
+	movcc	curbit, curbit, lsl #1
+	bcc	Lbignum
+Loop3:
+	@ Test for possible subtractions, and note which bits
+	@ are done in the result.  On the final pass, this may subtract
+	@ too much from the dividend, but the result will be ok, since the
+	@ "bit" will have been shifted out at the bottom.
+	cmp	dividend, divisor
+	subcs	dividend, dividend, divisor
+	orrcs	result, result, curbit
+	cmp	dividend, divisor, lsr #1
+	subcs	dividend, dividend, divisor, lsr #1
+	orrcs	result, result, curbit, lsr #1
+	cmp	dividend, divisor, lsr #2
+	subcs	dividend, dividend, divisor, lsr #2
+	orrcs	result, result, curbit, lsr #2
+	cmp	dividend, divisor, lsr #3
+	subcs	dividend, dividend, divisor, lsr #3
+	orrcs	result, result, curbit, lsr #3
+	cmp	dividend, #0			@ Early termination?
+	movnes	curbit, curbit, lsr #4		@ No, any more bits to do?
+	movne	divisor, divisor, lsr #4
+	bne	Loop3
+Lgot_result:
+	mov	r0, result
+	mov 	pc, lr
+Ldiv0:
+	str	lr, [sp, #-4]!
+	bl	 __div0       (PLT)
+	mov	r0, #0			@ about as wrong as it could be
+	ldmia	sp!, {pc}
+	.size  __udivsi3       , . -  __udivsi3
+/* # 235 "libgcc1.S" */
+/* # 320 "libgcc1.S" */
+/* # 421 "libgcc1.S" */
+/* # 433 "libgcc1.S" */
+/* # 456 "libgcc1.S" */
+/* # 500 "libgcc1.S" */
+/* # 580 "libgcc1.S" */
diff --git a/target/linux/at91/image/dfboot/src/_umodsi3.S b/target/linux/at91/image/dfboot/src/_umodsi3.S
new file mode 100644
index 0000000..e4aebe8
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/_umodsi3.S
@@ -0,0 +1,88 @@
+/* # 1 "libgcc1.S" */
+@ libgcc1 routines for ARM cpu.
+@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk)
+/* # 145 "libgcc1.S" */
+dividend	.req	r0
+divisor		.req	r1
+overdone	.req	r2
+curbit		.req	r3
+/* ip		.req	r12	*/
+/* sp		.req	r13	*/
+/* lr		.req	r14	*/
+/* pc		.req	r15	*/
+	.text
+	.globl	 __umodsi3
+	.type  __umodsi3       ,function
+	.align 0
+ __umodsi3      :
+	cmp	divisor, #0
+	beq	Ldiv0
+	mov	curbit, #1
+	cmp	dividend, divisor
+	movcc  	pc, lr
+Loop1:
+	@ Unless the divisor is very big, shift it up in multiples of
+	@ four bits, since this is the amount of unwinding in the main
+	@ division loop.  Continue shifting until the divisor is
+	@ larger than the dividend.
+	cmp	divisor, #0x10000000
+	cmpcc	divisor, dividend
+	movcc	divisor, divisor, lsl #4
+	movcc	curbit, curbit, lsl #4
+	bcc	Loop1
+Lbignum:
+	@ For very big divisors, we must shift it a bit at a time, or
+	@ we will be in danger of overflowing.
+	cmp	divisor, #0x80000000
+	cmpcc	divisor, dividend
+	movcc	divisor, divisor, lsl #1
+	movcc	curbit, curbit, lsl #1
+	bcc	Lbignum
+Loop3:
+	@ Test for possible subtractions.  On the final pass, this may
+	@ subtract too much from the dividend, so keep track of which
+	@ subtractions are done, we can fix them up afterwards...
+	mov	overdone, #0
+	cmp	dividend, divisor
+	subcs	dividend, dividend, divisor
+	cmp	dividend, divisor, lsr #1
+	subcs	dividend, dividend, divisor, lsr #1
+	orrcs	overdone, overdone, curbit, ror #1
+	cmp	dividend, divisor, lsr #2
+	subcs	dividend, dividend, divisor, lsr #2
+	orrcs	overdone, overdone, curbit, ror #2
+	cmp	dividend, divisor, lsr #3
+	subcs	dividend, dividend, divisor, lsr #3
+	orrcs	overdone, overdone, curbit, ror #3
+	mov	ip, curbit
+	cmp	dividend, #0			@ Early termination?
+	movnes	curbit, curbit, lsr #4		@ No, any more bits to do?
+	movne	divisor, divisor, lsr #4
+	bne	Loop3
+	@ Any subtractions that we should not have done will be recorded in
+	@ the top three bits of "overdone".  Exactly which were not needed
+	@ are governed by the position of the bit, stored in ip.
+	@ If we terminated early, because dividend became zero,
+	@ then none of the below will match, since the bit in ip will not be
+	@ in the bottom nibble.
+	ands	overdone, overdone, #0xe0000000
+	moveq  	pc, lr				@ No fixups needed
+	tst	overdone, ip, ror #3
+	addne	dividend, dividend, divisor, lsr #3
+	tst	overdone, ip, ror #2
+	addne	dividend, dividend, divisor, lsr #2
+	tst	overdone, ip, ror #1
+	addne	dividend, dividend, divisor, lsr #1
+	mov 	pc, lr
+Ldiv0:
+	str	lr, [sp, #-4]!
+	bl	 __div0       (PLT)
+	mov	r0, #0			@ about as wrong as it could be
+	ldmia	sp!, {pc}
+	.size  __umodsi3       , . -  __umodsi3
+/* # 320 "libgcc1.S" */
+/* # 421 "libgcc1.S" */
+/* # 433 "libgcc1.S" */
+/* # 456 "libgcc1.S" */
+/* # 500 "libgcc1.S" */
+/* # 580 "libgcc1.S" */
diff --git a/target/linux/at91/image/dfboot/src/asm_isr.S b/target/linux/at91/image/dfboot/src/asm_isr.S
new file mode 100644
index 0000000..8d1d52e
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/asm_isr.S
@@ -0,0 +1,75 @@
+#include "AT91RM9200_inc.h"
+
+#define ARM_MODE_USER           0x10
+#define ARM_MODE_FIQ            0x11
+#define ARM_MODE_IRQ            0x12
+#define ARM_MODE_SVC            0x13
+#define ARM_MODE_ABORT          0x17
+#define ARM_MODE_UNDEF          0x1B
+#define ARM_MODE_SYS            0x1F
+
+#define I_BIT                   0x80
+#define F_BIT                   0x40
+#define T_BIT                   0x20
+
+
+/* -----------------------------------------------------------------------------
+   AT91F_ASM_SPI_Handler
+   ---------------------
+      Handler called by the AIC
+        
+      Save context
+        Call C handler
+    Restore context
+   ----------------------------------------------------------------------------- */
+		
+.global AT91F_ST_ASM_HANDLER
+
+AT91F_ST_ASM_HANDLER:
+/*  Adjust and save LR_irq in IRQ stack */
+ 	sub         r14, r14, #4
+	stmfd       sp!, {r14}
+
+/*  Write in the IVR to support Protect Mode
+  No effect in Normal Mode
+  De-assert the NIRQ and clear the source in Protect Mode */
+	ldr         r14, =AT91C_BASE_AIC
+	str         r14, [r14, #AIC_IVR]
+
+/*  Save SPSR and r0 in IRQ stack */
+	mrs         r14, SPSR
+	stmfd       sp!, {r0, r14}
+
+/*  Enable Interrupt and Switch in SYS Mode */
+	mrs         r0, CPSR
+	bic         r0, r0, #I_BIT
+	orr         r0, r0, #ARM_MODE_SYS
+	msr         CPSR_c, r0
+ 
+/* Save scratch/used registers and LR in User Stack */
+	stmfd       sp!, { r1-r3, r12, r14}
+
+	ldr     r1, =AT91F_ST_HANDLER
+	mov     r14, pc
+	bx      r1
+
+/*  Restore scratch/used registers and LR from User Stack */
+	ldmia       sp!, { r1-r3, r12, r14}
+
+/*  Disable Interrupt and switch back in IRQ mode */
+	mrs         r0, CPSR
+	bic         r0, r0, #ARM_MODE_SYS
+	orr         r0, r0, #I_BIT | ARM_MODE_IRQ
+	msr         CPSR_c, r0
+
+/*  Mark the End of Interrupt on the AIC */
+	ldr         r0, =AT91C_BASE_AIC
+	str         r0, [r0, #AIC_EOICR]
+
+/*  Restore SPSR_irq and r0 from IRQ stack */
+	ldmia       sp!, {r0, r14}
+	msr         SPSR_cxsf, r14
+
+/*  Restore adjusted  LR_irq from IRQ stack directly in the PC */
+	ldmia       sp!, {pc}^
+
diff --git a/target/linux/at91/image/dfboot/src/asm_mci_isr.S b/target/linux/at91/image/dfboot/src/asm_mci_isr.S
new file mode 100644
index 0000000..0f66fc0
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/asm_mci_isr.S
@@ -0,0 +1,75 @@
+#include <AT91RM9200_inc.h>
+
+#define ARM_MODE_USER           0x10
+#define ARM_MODE_FIQ            0x11
+#define ARM_MODE_IRQ            0x12
+#define ARM_MODE_SVC            0x13
+#define ARM_MODE_ABORT          0x17
+#define ARM_MODE_UNDEF          0x1B
+#define ARM_MODE_SYS            0x1F
+
+#define I_BIT                   0x80
+#define F_BIT                   0x40
+#define T_BIT                   0x20
+
+
+/* -----------------------------------------------------------------------------
+   AT91F_ASM_MCI_Handler
+   ---------------------
+      Handler called by the AIC
+        
+      Save context
+        Call C handler
+    Restore context
+   ----------------------------------------------------------------------------- */
+		
+.global AT91F_ASM_MCI_Handler  
+
+AT91F_ASM_MCI_Handler:
+/*  Adjust and save LR_irq in IRQ stack */
+ 	sub         r14, r14, #4
+	stmfd       sp!, {r14}
+
+/*  Write in the IVR to support Protect Mode
+  No effect in Normal Mode
+  De-assert the NIRQ and clear the source in Protect Mode */
+	ldr         r14, =AT91C_BASE_AIC
+	str         r14, [r14, #AIC_IVR]
+
+/*  Save SPSR and r0 in IRQ stack */
+	mrs         r14, SPSR
+	stmfd       sp!, {r0, r14}
+
+/*  Enable Interrupt and Switch in SYS Mode */
+	mrs         r0, CPSR
+	bic         r0, r0, #I_BIT
+	orr         r0, r0, #ARM_MODE_SYS
+	msr         CPSR_c, r0
+ 
+/* Save scratch/used registers and LR in User Stack */
+	stmfd       sp!, { r1-r3, r12, r14}
+
+	ldr     r1, =AT91F_MCI_Handler
+	mov     r14, pc
+	bx      r1
+
+/*  Restore scratch/used registers and LR from User Stack */
+	ldmia       sp!, { r1-r3, r12, r14}
+
+/*  Disable Interrupt and switch back in IRQ mode */
+	mrs         r0, CPSR
+	bic         r0, r0, #ARM_MODE_SYS
+	orr         r0, r0, #I_BIT | ARM_MODE_IRQ
+	msr         CPSR_c, r0
+
+/*  Mark the End of Interrupt on the AIC */
+	ldr         r0, =AT91C_BASE_AIC
+	str         r0, [r0, #AIC_EOICR]
+
+/*  Restore SPSR_irq and r0 from IRQ stack */
+	ldmia       sp!, {r0, r14}
+	msr         SPSR_cxsf, r14
+
+/*  Restore adjusted  LR_irq from IRQ stack directly in the PC */
+	ldmia       sp!, {pc}^
+
diff --git a/target/linux/at91/image/dfboot/src/at45.c b/target/linux/at91/image/dfboot/src/at45.c
new file mode 100644
index 0000000..8830d7e
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/at45.c
@@ -0,0 +1,595 @@
+/*----------------------------------------------------------------------------
+ *      ATMEL Microcontroller Software Support  -  ROUSSET  -
+ *----------------------------------------------------------------------------
+ * The software is delivered "AS IS" without warranty or condition of any
+ * kind, either express, implied or statutory. This includes without
+ * limitation any warranty or condition with respect to merchantability or
+ * fitness for any particular purpose, or against the infringements of
+ * intellectual property rights of others.
+ *----------------------------------------------------------------------------
+ * File Name           : at45c.h
+ * Object              : 
+ *
+ * 1.0  10/12/03 HIi    : Creation.
+ * 1.01 03/05/04 HIi    : Bug Fix in AT91F_DataFlashWaitReady() Function.
+ *----------------------------------------------------------------------------
+ */
+#include "config.h"
+#include "stdio.h"
+#include "AT91RM9200.h"
+#include "lib_AT91RM9200.h"
+#include "dataflash.h"
+#include "main.h"
+
+
+/*----------------------------------------------------------------------------*/
+/* \fn    AT91F_SpiInit                                                       */
+/* \brief SPI Low level Init                                                  */
+/*----------------------------------------------------------------------------*/
+void AT91F_SpiInit(void) {
+	/* Configure PIOs */
+	AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | 
+	                           AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
+	                           AT91C_PA6_NPCS3 | AT91C_PA0_MISO |
+	                           AT91C_PA2_SPCK;
+	AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 |
+	                           AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
+	                           AT91C_PA6_NPCS3 | AT91C_PA0_MISO |
+	                           AT91C_PA2_SPCK;
+	/* Enable CLock */
+	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI;
+
+	/* Reset the SPI */
+	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST;
+
+	/* Configure SPI in Master Mode with No CS selected !!! */
+	AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;
+
+	/* Configure CS0 and CS3 */
+	*(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) |
+	                       (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) |
+	                       ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
+	*(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) |
+	                       (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) |
+	                       ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
+}
+
+
+/*----------------------------------------------------------------------------*/
+/* \fn    AT91F_SpiEnable                                                     */
+/* \brief Enable SPI chip select                                              */
+/*----------------------------------------------------------------------------*/
+static void AT91F_SpiEnable(int cs) {
+	switch(cs) {
+	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
+		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
+		AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH << 16) & AT91C_SPI_PCS);
+		break;
+	case 3:	/* Configure SPI CS3 for Serial DataFlash Card */
+		/* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */
+		AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7;	/* Set in PIO mode */
+		AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7;	/* Configure in output */
+		/* Clear Output */
+		AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7;
+		/* Configure PCS */
+		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
+		AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
+		break;
+	}
+
+	/* SPI_Enable */
+	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN;
+}
+
+/*----------------------------------------------------------------------------*/
+/* \fn    AT91F_SpiWrite                                                      */
+/* \brief Set the PDC registers for a transfert                               */
+/*----------------------------------------------------------------------------*/
+static unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
+{
+   	unsigned int timeout;
+	
+   	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
+
+   	/* Initialize the Transmit and Receive Pointer */
+    	AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ;
+    	AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ;
+
+    	/* Intialize the Transmit and Receive Counters */
+    	AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size;
+    	AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size;
+
+	if ( pDesc->tx_data_size != 0 ) {
+	   	/* Initialize the Next Transmit and Next Receive Pointer */
+	   	AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ;
+		AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ;
+
+		/* Intialize the Next Transmit and Next Receive Counters */
+		AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ;
+	 	AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ;
+   	}
+
+	/* ARM simple, non interrupt dependent timer */
+	timeout = 0;
+
+	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
+	while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF));
+
+   	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
+
+	if (timeout >= AT91C_DATAFLASH_TIMEOUT){
+		return AT91C_DATAFLASH_ERROR;
+	}
+
+	return AT91C_DATAFLASH_OK;
+}
+
+
+/*----------------------------------------------------------------------*/
+/* \fn    AT91F_DataFlashSendCommand					*/
+/* \brief Generic function to send a command to the dataflash		*/
+/*----------------------------------------------------------------------*/
+static AT91S_DataFlashStatus AT91F_DataFlashSendCommand(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char OpCode,
+	unsigned int CmdSize,
+	unsigned int DataflashAddress)
+{
+	unsigned int adr;
+
+	/* process the address to obtain page address and byte address */
+	adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) 
+	        << pDataFlash->pDevice->page_offset) +
+	        (DataflashAddress % (pDataFlash->pDevice->pages_size));
+
+	/* fill the  command  buffer */
+	pDataFlash->pDataFlashDesc->command[0] = OpCode;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+	{
+		pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x0F000000) >> 24);
+		pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x00FF0000) >> 16);
+		pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((adr & 0x0000FF00) >> 8);
+		pDataFlash->pDataFlashDesc->command[4] = (unsigned char)(adr & 0x000000FF);
+	}
+	else
+	{	
+		pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16);
+		pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8);
+		pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ;
+		pDataFlash->pDataFlashDesc->command[4] = 0;
+	}
+	pDataFlash->pDataFlashDesc->command[5] = 0;
+	pDataFlash->pDataFlashDesc->command[6] = 0;
+	pDataFlash->pDataFlashDesc->command[7] = 0;
+
+	/* Initialize the SpiData structure for the spi write fuction */
+	pDataFlash->pDataFlashDesc->tx_cmd_pt   =  pDataFlash->pDataFlashDesc->command ;
+	pDataFlash->pDataFlashDesc->tx_cmd_size =  CmdSize ;
+	pDataFlash->pDataFlashDesc->rx_cmd_pt   =  pDataFlash->pDataFlashDesc->command ;
+	pDataFlash->pDataFlashDesc->rx_cmd_size =  CmdSize ;
+
+	return AT91F_SpiWrite(pDataFlash->pDataFlashDesc);			
+}
+
+
+/*----------------------------------------------------------------------*/
+/* \fn    AT91F_DataFlashGetStatus					*/
+/* \brief Read the status register of the dataflash			*/
+/*----------------------------------------------------------------------*/
+static AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc)
+{
+	AT91S_DataFlashStatus status;
+
+	/* first send the read status command (D7H) */
+	pDesc->command[0] = DB_STATUS;
+	pDesc->command[1] = 0;
+
+	pDesc->DataFlash_state = GET_STATUS;
+    	pDesc->tx_data_size    = 0 ; /* Transmit the command and receive response */
+    	pDesc->tx_cmd_pt       = pDesc->command ;
+    	pDesc->rx_cmd_pt       = pDesc->command ;
+    	pDesc->rx_cmd_size     = 2 ;
+    	pDesc->tx_cmd_size     = 2 ;
+    	status = AT91F_SpiWrite (pDesc);
+
+	pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1);
+	return status;
+}
+
+/*-----------------------------------------------------------------------------
+ * Function Name       : AT91F_DataFlashWaitReady
+ * Object              : wait for dataflash ready (bit7 of the status register == 1)
+ * Input Parameters    : DataFlash Service and timeout
+ * Return value        : DataFlash status "ready or not"
+ *-----------------------------------------------------------------------------
+ */
+static AT91S_DataFlashStatus AT91F_DataFlashWaitReady(
+	AT91PS_DataflashDesc pDataFlashDesc,
+	unsigned int timeout)
+{
+	pDataFlashDesc->DataFlash_state = IDLE;
+        do {
+                AT91F_DataFlashGetStatus(pDataFlashDesc);
+                timeout--;
+        }
+        while(((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0));
+
+        if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80)
+                return AT91C_DATAFLASH_ERROR;
+
+        return AT91C_DATAFLASH_OK;
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashContinuousRead                          */
+/* Object              : Continuous stream Read                                 */
+/* Input Parameters    : DataFlash Service                                      */
+/*                     : <src> = dataflash address                              */
+/*                     : <*dataBuffer> = data buffer pointer                    */
+/*                     : <sizeToRead> = data buffer size                        */
+/* Return value        : State of the dataflash                                 */
+/*------------------------------------------------------------------------------*/
+static AT91S_DataFlashStatus AT91F_DataFlashContinuousRead(
+ 	AT91PS_DataFlash pDataFlash,
+	int src,
+	unsigned char *dataBuffer,
+	int sizeToRead )
+{
+	AT91S_DataFlashStatus status;
+	/* Test the size to read in the device */
+	if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
+		return AT91C_DATAFLASH_MEMORY_OVERFLOW;
+
+	pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer;
+	pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead;
+	pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer;
+	pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead;
+	
+	status = AT91F_DataFlashSendCommand(pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src);
+	/* Send the command to the dataflash */
+	return(status);
+}
+
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_MainMemoryToBufferTransfer                       */
+/* Object              : Read a page in the SRAM Buffer 1 or 2                  */
+/* Input Parameters    : DataFlash Service                                      */
+/*                     : Page concerned                                         */
+/*                     :                                                        */
+/* Return value        : State of the dataflash                                 */
+/*------------------------------------------------------------------------------*/
+static AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfer(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned int page)
+{
+	int cmdsize;
+	/* Test if the buffer command is legal */
+	if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF))
+		return AT91C_DATAFLASH_BAD_COMMAND;
+
+	/* no data to transmit or receive */
+    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
+	cmdsize = 4;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	return(AT91F_DataFlashSendCommand(pDataFlash, BufferCommand, cmdsize,
+	                                  page*pDataFlash->pDevice->pages_size));
+}
+
+
+
+/*----------------------------------------------------------------------------- */
+/* Function Name       : AT91F_DataFlashWriteBuffer                             */
+/* Object              : Write data to the internal sram buffer 1 or 2          */
+/* Input Parameters    : DataFlash Service                                      */
+/*                     : <BufferCommand> = command to write buffer1 or buffer2  */
+/*                     : <*dataBuffer> = data buffer to write                   */
+/*                     : <bufferAddress> = address in the internal buffer       */
+/*                     : <SizeToWrite> = data buffer size                       */
+/* Return value        : State of the dataflash                                 */
+/*------------------------------------------------------------------------------*/
+static AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned char *dataBuffer,
+	unsigned int bufferAddress,
+	int SizeToWrite )
+{
+	int cmdsize;
+	/* Test if the buffer command is legal */
+	if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE))
+		return AT91C_DATAFLASH_BAD_COMMAND;
+
+	/* buffer address must be lower than page size */
+	if (bufferAddress > pDataFlash->pDevice->pages_size)
+		return AT91C_DATAFLASH_BAD_ADDRESS;
+
+    	/* Send first Write Command */
+	pDataFlash->pDataFlashDesc->command[0] = BufferCommand;
+	pDataFlash->pDataFlashDesc->command[1] = 0;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+	{
+	   	pDataFlash->pDataFlashDesc->command[2] = 0;
+	   	pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress &  pDataFlash->pDevice->byte_mask)) >> 8) ;
+	   	pDataFlash->pDataFlashDesc->command[4] = (unsigned char)((unsigned int)bufferAddress  & 0x00FF) ;
+		cmdsize = 5;
+	}
+	else
+	{
+	   	pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress &  pDataFlash->pDevice->byte_mask)) >> 8) ;
+	   	pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress  & 0x00FF) ;
+	   	pDataFlash->pDataFlashDesc->command[4] = 0;
+		cmdsize = 4;
+	}
+		
+	pDataFlash->pDataFlashDesc->tx_cmd_pt 	 = pDataFlash->pDataFlashDesc->command ;
+	pDataFlash->pDataFlashDesc->tx_cmd_size  = cmdsize ;
+	pDataFlash->pDataFlashDesc->rx_cmd_pt 	 = pDataFlash->pDataFlashDesc->command ;
+	pDataFlash->pDataFlashDesc->rx_cmd_size  = cmdsize ;
+
+	pDataFlash->pDataFlashDesc->rx_data_pt 	 = dataBuffer ;
+	pDataFlash->pDataFlashDesc->tx_data_pt 	 = dataBuffer ;
+	pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite ;
+	pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ;
+
+	return AT91F_SpiWrite(pDataFlash->pDataFlashDesc);
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_PageErase                                        */             
+/* Object              : Read a page in the SRAM Buffer 1 or 2                  */
+/* Input Parameters    : DataFlash Service                                      */
+/*                     : Page concerned                                         */
+/*                     :                                                        */
+/* Return value        : State of the dataflash                                 */
+/*------------------------------------------------------------------------------*/
+static AT91S_DataFlashStatus AT91F_PageErase(
+	AT91PS_DataFlash pDataFlash,
+	unsigned int page)
+{
+	int cmdsize;
+	/* Test if the buffer command is legal */	
+	/* no data to transmit or receive */
+    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
+	
+	cmdsize = 4;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	return(AT91F_DataFlashSendCommand(pDataFlash, DB_PAGE_ERASE, cmdsize,
+	                                  page*pDataFlash->pDevice->pages_size));
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_WriteBufferToMain                                */
+/* Object              : Write buffer to the main memory                        */
+/* Input Parameters    : DataFlash Service                                      */
+/*                     : <BufferCommand> = command to send to buf1 or buf2      */
+/*                     : <dest> = main memory address                           */
+/* Return value        : State of the dataflash                                 */
+/*------------------------------------------------------------------------------*/
+static AT91S_DataFlashStatus AT91F_WriteBufferToMain (
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned int dest )
+{
+	int cmdsize;
+	/* Test if the buffer command is correct */
+	if ((BufferCommand != DB_BUF1_PAGE_PGM) &&
+	    (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) &&
+	    (BufferCommand != DB_BUF2_PAGE_PGM) &&
+	    (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) )
+		return AT91C_DATAFLASH_BAD_COMMAND;
+
+	/* no data to transmit or receive */
+	pDataFlash->pDataFlashDesc->tx_data_size = 0;
+
+	cmdsize = 4;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	/* Send the command to the dataflash */
+	return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, dest));
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_PartialPageWrite                                 */
+/* Object              : Erase partially a page                                 */
+/* Input Parameters    : <page> = page number                                   */
+/*                     : <AdrInpage> = adr to begin the fading                  */
+/*                     : <length> = Number of bytes to erase                    */
+/*------------------------------------------------------------------------------*/
+static AT91S_DataFlashStatus AT91F_PartialPageWrite (
+	AT91PS_DataFlash pDataFlash,
+	unsigned char *src,
+	unsigned int dest,
+	unsigned int size)
+{
+	unsigned int page;
+	unsigned int AdrInPage;
+
+	page = dest / (pDataFlash->pDevice->pages_size);
+	AdrInPage = dest % (pDataFlash->pDevice->pages_size);
+
+	/* Read the contents of the page in the Sram Buffer */
+	AT91F_MainMemoryToBufferTransfer(pDataFlash, DB_PAGE_2_BUF1_TRF, page);
+	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT);
+	
+	/*Update the SRAM buffer */
+	AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size);
+	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT);
+	
+	/* Erase page if a 128 Mbits device */
+	if (pDataFlash->pDevice->pages_number >= 16384)
+	{
+		AT91F_PageErase(pDataFlash, page);
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT);
+	}
+
+	/* Rewrite the modified Sram Buffer in the main memory */
+	return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM,
+	                               (page*pDataFlash->pDevice->pages_size)));
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashWrite                                   */
+/* Object              :                                                        */
+/* Input Parameters    : <*src> = Source buffer                                 */
+/*                     : <dest> = dataflash adress                              */
+/*                     : <size> = data buffer size                              */
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashWrite(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char *src,
+	int dest,
+	int size )
+{
+	unsigned int length;
+	unsigned int page;
+	unsigned int status;
+
+	AT91F_SpiEnable(pDataFlash->pDevice->cs);
+
+	if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
+		return AT91C_DATAFLASH_MEMORY_OVERFLOW;
+
+    	/* If destination does not fit a page start address */
+	if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size)))  != 0 ) {
+		length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size)));
+
+		if (size < length)
+			length = size;
+
+		if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length))
+			return AT91C_DATAFLASH_ERROR;
+
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT);
+
+		/* Update size, source and destination pointers */
+        	size -= length;
+        	dest += length;
+        	src += length;
+	}
+
+	while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) 
+	{
+		/* program dataflash page */		
+		page = (unsigned int)dest / (pDataFlash->pDevice->pages_size);
+
+		status = AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src,
+		                                    0, pDataFlash->pDevice->pages_size);
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT);
+	
+		status = AT91F_PageErase(pDataFlash, page);
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT);
+		if (!status)
+			return AT91C_DATAFLASH_ERROR;
+		
+		status = AT91F_WriteBufferToMain (pDataFlash, DB_BUF1_PAGE_PGM, dest);
+		if(!status)
+			return AT91C_DATAFLASH_ERROR;
+
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT);
+	
+		/* Update size, source and destination pointers */
+	   	size -= pDataFlash->pDevice->pages_size ;
+	   	dest += pDataFlash->pDevice->pages_size ;
+	   	src  += pDataFlash->pDevice->pages_size ;
+	}
+
+	/* If still some bytes to read */
+	if ( size > 0 ) {
+		/* program dataflash page */
+		if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) )
+			return AT91C_DATAFLASH_ERROR;
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT);
+	}
+	return AT91C_DATAFLASH_OK;
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashRead                                    */
+/* Object              : Read a block in dataflash                              */
+/* Input Parameters    :                                                        */
+/* Return value        :                                                        */
+/*------------------------------------------------------------------------------*/
+int AT91F_DataFlashRead(
+	AT91PS_DataFlash pDataFlash,
+	unsigned long addr,
+	unsigned long size,
+	char *buffer)
+{
+	unsigned long SizeToRead;
+
+	AT91F_SpiEnable(pDataFlash->pDevice->cs);
+
+	if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT) != AT91C_DATAFLASH_OK)
+		return -1;
+
+	while (size)
+	{
+		SizeToRead = (size < 0x8000)? size:0x8000;
+
+		if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT)
+		    != AT91C_DATAFLASH_OK)
+			return -1;
+
+		if (AT91F_DataFlashContinuousRead (pDataFlash, addr, (unsigned char *)buffer,
+		                                   SizeToRead) != AT91C_DATAFLASH_OK)
+			return -1;
+
+		size -= SizeToRead;
+		addr += SizeToRead;
+		buffer += SizeToRead;
+	}
+
+   	return AT91C_DATAFLASH_OK;
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataflashProbe                                   */
+/* Object              :                                                        */
+/* Input Parameters    :                                                        */
+/* Return value	       : Dataflash status register                              */
+/*------------------------------------------------------------------------------*/
+int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc)
+{
+	AT91F_SpiEnable(cs);
+   	AT91F_DataFlashGetStatus(pDesc);
+   	return ((pDesc->command[1] == 0xFF)? 0: (pDesc->command[1] & 0x3C));
+}
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashErase                                   */
+/* Object              :                                                        */
+/* Input Parameters    : <*pDataFlash> = Device info                            */
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashErase(AT91PS_DataFlash pDataFlash)
+{
+	unsigned int page;
+	unsigned int status;
+
+	AT91F_SpiEnable(pDataFlash->pDevice->cs);
+ 
+ 	for(page=0; page < pDataFlash->pDevice->pages_number; page++)
+	    {
+		/* Erase dataflash page */
+		if ((page & 0x00FF) == 0)
+			printf("\rERA %d/%d", page, pDataFlash->pDevice->pages_number);
+		status = AT91F_PageErase(pDataFlash, page);
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT);
+		if (!status)
+			return AT91C_DATAFLASH_ERROR;
+   	}
+
+	return AT91C_DATAFLASH_OK;
+}
+
diff --git a/target/linux/at91/image/dfboot/src/com.c b/target/linux/at91/image/dfboot/src/com.c
new file mode 100644
index 0000000..aacfb55
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/com.c
@@ -0,0 +1,368 @@
+/*----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
+ *----------------------------------------------------------------------------
+ * The software is delivered "AS IS" without warranty or condition of any
+ * kind, either express, implied or statutory. This includes without
+ * limitation any warranty or condition with respect to merchantability or
+ * fitness for any particular purpose, or against the infringements of
+ * intellectual property rights of others.
+ *----------------------------------------------------------------------------
+ * File Name           : com.c
+ * Object              : 
+ * Creation            : HIi   03/27/2003
+ *
+ *----------------------------------------------------------------------------
+ */
+#include "AT91RM9200.h"
+#include "lib_AT91RM9200.h"
+#include "config.h"
+#include "com.h"
+#include "stdio.h"
+
+static char erase_seq[] = "\b \b";		/* erase sequence	*/
+
+#define MAX_UARTS 1
+
+//unsigned int usa[2] = {(unsigned int)AT91C_BASE_DBGU, (unsigned int)AT91C_ALTERNATE_USART};
+unsigned int usa[1] = {(unsigned int)AT91C_BASE_DBGU};
+unsigned int us;
+int port_detected;
+
+void at91_init_uarts(void)
+{
+	int i;
+
+	port_detected = 0;
+	AT91F_DBGU_CfgPIO();
+	AT91F_US0_CfgPIO();
+	AT91F_US0_CfgPMC();
+
+	for(i=0; i<MAX_UARTS; i++) {
+		us = usa[i];
+		AT91F_US_ResetRx((AT91PS_USART)us);
+		AT91F_US_ResetTx((AT91PS_USART)us);
+
+		// Configure DBGU
+		AT91F_US_Configure(
+			(AT91PS_USART)us, // DBGU base address
+			AT91C_MASTER_CLOCK,            // 60 MHz
+			AT91C_US_ASYNC_MODE,           // mode Register to be programmed
+			115200,                        // baudrate to be programmed
+			0                              // timeguard to be programmed
+			);
+
+		// Enable Transmitter
+		AT91F_US_EnableTx((AT91PS_USART)us);
+		// Enable Receiver
+		AT91F_US_EnableRx((AT91PS_USART)us);
+	}
+	us = usa[0];
+}
+
+int at91_serial_putc(int ch)
+{
+	if (ch == '\n')
+		at91_serial_putc('\r');
+	while (!AT91F_US_TxReady((AT91PS_USART)us));
+	AT91F_US_PutChar((AT91PS_USART)us, (char)ch);
+	return ch;
+}
+
+/* This getc is modified to be able work on more than one port. On certain
+ * boards (i.e. Figment Designs VersaLink), the debug port is not available
+ * once the unit is in it's enclosure, so, if one needs to get into dfboot
+ * for any reason it is impossible. With this getc, it scans between the debug
+ * port and another port and once it receives a character, it sets that port
+ * as the debug port. */
+int at91_serial_getc()
+{
+	while(1) {
+#if 0
+		if (!port_detected) {
+			if (us == usa[0]) {
+				us = usa[1];
+			}
+			else {
+				us = usa[0];
+			}
+		}
+#endif
+		if(AT91F_US_RxReady((AT91PS_USART)us)) {
+#if 0
+			port_detected = 1;
+#endif
+			return((int)AT91F_US_GetChar((AT91PS_USART)us));
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------------
+ * Function Name       : AT91F_ReadLine()
+ * Object              : 
+ * Input Parameters    : 
+ * Return value		: 
+ *-----------------------------------------------------------------------------
+ */
+int AT91F_ReadLine (const char *const prompt, char *console_buffer)
+{
+	char *p = console_buffer;
+	int	n = 0;					/* buffer index		*/
+	int	plen = strlen (prompt);	/* prompt length	*/
+	int	col;					/* output column cnt	*/
+	char	c;
+
+	/* print prompt */
+	if (prompt)
+		printf(prompt);
+	col = plen;
+
+	for (;;) {
+		c = getc();
+
+		switch (c) {
+			case '\r':				/* Enter		*/
+			case '\n':
+				*p = '\0';
+				puts ("\n");
+				return (p - console_buffer);
+
+			case 0x03:				/* ^C - break	*/
+				console_buffer[0] = '\0';	/* discard input */
+				return (-1);
+
+			case 0x08:				/* ^H  - backspace	*/
+			case 0x7F:				/* DEL - backspace	*/
+				if (n) {
+					--p;
+					printf(erase_seq);
+					col--;
+					n--;
+					}
+				continue;
+
+			default:
+			/*
+			 * Must be a normal character then
+			 */
+			if (n < (AT91C_CB_SIZE -2)) 
+			{
+				++col;		/* echo input		*/
+				putc(c);
+				*p++ = c;
+				++n;
+			} 
+			else 
+			{			/* Buffer full		*/
+				putc('\a');
+			}
+		}
+	}
+}
+
+
+/*-----------------------------------------------------------------------------
+ * Function Name       : AT91F_WaitKeyPressed()
+ * Object              : 
+ * Input Parameters    : 
+ * Return value		: 
+ *-----------------------------------------------------------------------------
+ */
+void AT91F_WaitKeyPressed(void)
+{
+	int c;
+    	puts("KEY");
+		c = getc();
+	putc('\n');
+}
+
+int puts(const char *str)
+{
+  while(*str != 0) {
+		at91_serial_putc(*str);
+		str++;
+		}
+	return 1;
+}
+
+int putc(int c)
+{
+  return at91_serial_putc(c);
+}
+
+int putchar(c)
+{
+	return putc(c);
+}
+
+int getc()
+{
+  return at91_serial_getc();
+}
+
+int strlen(const char *str)
+{
+  int len = 0;
+
+  if(str == (char *)0)
+    return 0;
+
+  while(*str++ != 0)
+    len++;
+
+  return len;
+}
+
+#define ZEROPAD 1               /* pad with zero */
+#define SIGN    2               /* unsigned/signed long */
+#define LEFT    4              /* left justified */
+#define LARGE   8              /* use 'ABCDEF' instead of 'abcdef' */
+
+#define do_div(n,base) ({ \
+        int __res; \
+        __res = ((unsigned) n) % (unsigned) base; \
+        n = ((unsigned) n) / (unsigned) base; \
+        __res; \
+})
+
+static int number(int num, int base, int size,
+                  int precision, int type)
+{
+  char c, sign, tmp[66];
+  const char *digits="0123456789ABCDEF";
+  int i;
+
+  if (type & LEFT)
+    type &= ~ZEROPAD;
+  if (base < 2 || base > 16)
+    return 0;
+  c = (type & ZEROPAD) ? '0' : ' ';
+  sign = 0;
+
+  if(type & SIGN && num < 0)
+    {
+      sign = '-';
+      num = -num;
+      size--;
+    }
+  
+  i = 0;
+  if(num == 0)
+    tmp[i++] = digits[0];
+  else while(num != 0)
+    tmp[i++] = digits[do_div(num, base)];
+
+  if(i > precision)
+    precision = i;
+  size -= precision;
+  
+  if(!(type&(ZEROPAD+LEFT)))
+    while(size-->0)
+      putc(' ');
+  
+  if(sign)
+    putc(sign);
+
+  if (!(type & LEFT))
+    while (size-- > 0)
+      putc(c);
+
+  while (i < precision--)
+    putc('0');
+  
+  while (i-- > 0)
+    putc(tmp[i]);
+
+  while (size-- > 0)
+    putc(' ');;
+
+  return 1;
+}
+
+int hvfprintf(const char *fmt, va_list va)
+{
+  char *s;
+
+	do {
+		if(*fmt == '%')	{
+			bool done = false;
+
+			int type = 0;
+			int precision = 0;
+
+			do {
+				fmt++;
+				switch(*fmt) {
+				case '0' :
+					if(!precision)
+						type |= ZEROPAD;
+				case '1' :
+				case '2' :
+				case '3' :
+				case '4' :
+				case '5' :
+				case '6' :
+				case '7' :
+				case '8' :
+				case '9' :
+					precision = precision * 10 + (*fmt - '0');
+					break;
+				case '.' :
+					break;
+				case 's' :
+					s = va_arg(va, char *);
+					if(!s)
+						puts("<NULL>");
+					else
+						puts(s);
+					done = true;
+					break;
+				case 'c' :
+					putc(va_arg(va, int));
+					done = true;
+					break;
+				case 'd' :
+					number(va_arg(va, int), 10, 0, precision, type);
+					done = true;
+					break;
+				case 'x' :
+				case 'X' :
+					number(va_arg(va, int), 16, 0, precision, type);
+					done = true;
+					break;
+				case '%' :
+					putc(*fmt);
+					done = true;
+				default: 
+					putc('%');
+					putc(*fmt);
+					done = true;
+					break;
+				} 
+			} while(!done);
+		} else if(*fmt == '\\') {
+			fmt++;
+			if(*fmt == 'r') {
+				putc('\r');
+			} else if(*fmt == 'n') { 
+				putc('\n');
+			}
+        	} else {
+         		putc(*fmt);
+        	}
+		fmt++;
+	} while(*fmt != 0);
+  
+  return 0;
+}
+
+int printf(const char *fmt, ...)
+{
+  va_list ap;
+  int i;
+
+  va_start(ap, fmt);
+  i = hvfprintf(fmt, ap);
+  va_end(ap);
+
+  return i;
+}
diff --git a/target/linux/at91/image/dfboot/src/com.h b/target/linux/at91/image/dfboot/src/com.h
new file mode 100644
index 0000000..7af09e4
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/com.h
@@ -0,0 +1,28 @@
+/*----------------------------------------------------------------------------
+ *      ATMEL Microcontroller Software Support  -  ROUSSET  -
+ *----------------------------------------------------------------------------
+ * The software is delivered "AS IS" without warranty or condition of any
+ * kind, either express, implied or statutory. This includes without
+ * limitation any warranty or condition with respect to merchantability or
+ * fitness for any particular purpose, or against the infringements of
+ * intellectual property rights of others.
+ *----------------------------------------------------------------------------
+ * File Name           : com.h
+ * Object              : 
+ *
+ * 1.0 27/03/03 HIi    : Creation
+ *----------------------------------------------------------------------------
+ */
+#ifndef com_h
+#define com_h
+
+#define AT91C_CB_SIZE 20 /* size of the console buffer */
+
+/* Escape sequences */
+#define ESC \033
+
+extern int AT91F_ReadLine (const char *const prompt, char *console_buffer);
+extern void AT91F_WaitKeyPressed(void);
+
+#endif
+
diff --git a/target/linux/at91/image/dfboot/src/config.h b/target/linux/at91/image/dfboot/src/config.h
new file mode 100644
index 0000000..3be8d49
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/config.h
@@ -0,0 +1,17 @@
+
+#ifndef _CONFIG_H
+#define _CONFIG_H
+
+//#define	PAGESZ_1056			1
+#undef PAGESZ_1056
+#define	SPI_LOW_SPEED			1
+#define AT91C_DELAY_TO_BOOT 		1500
+
+#define	CRC_RETRIES			0x100
+
+#define AT91C_MASTER_CLOCK              59904000
+#define AT91C_BAUD_RATE                 115200
+
+#define AT91C_ALTERNATE_USART	AT91C_BASE_US0
+
+#endif
diff --git a/target/linux/at91/image/dfboot/src/cstartup_ram.S b/target/linux/at91/image/dfboot/src/cstartup_ram.S
new file mode 100644
index 0000000..2239000
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/cstartup_ram.S
@@ -0,0 +1,144 @@
+#include "AT91RM9200_inc.h"
+		
+/*---------------------------
+ARM Core Mode and Status Bits
+---------------------------*/
+.section start
+	.text
+			
+#define ARM_MODE_USER   0x10
+#define ARM_MODE_FIQ    0x11
+#define ARM_MODE_IRQ    0x12
+#define ARM_MODE_SVC    0x13
+#define ARM_MODE_ABORT  0x17
+#define ARM_MODE_UNDEF  0x1B
+#define ARM_MODE_SYS    0x1F
+
+#define I_BIT           0x80
+#define F_BIT           0x40
+#define T_BIT           0x20
+
+/*----------------------------------------------------------------------------
+ Area Definition
+----------------
+ Must be defined as function to put first in the code as it must be mapped
+ at offset 0 of the flash EBI_CSR0, ie. at address 0 before remap.
+_---------------------------------------------------------------------------*/
+
+  .align  4
+	.globl _start
+_start:
+
+/*----------------------------------------------------------------------------
+ Exception vectors ( before Remap )
+------------------------------------
+ These vectors are read at address 0.
+ They absolutely requires to be in relative addresssing mode in order to
+ guarantee a valid jump. For the moment, all are just looping (what may be
+ dangerous in a final system). If an exception occurs before remap, this
+ would result in an infinite loop.
+----------------------------------------------------------------------------*/
+                b           reset			       	/* reset */
+                b           undefvec        	/* Undefined Instruction */
+                b           swivec          	/* Software Interrupt */
+                b           pabtvec         	/* Prefetch Abort */
+                b           dabtvec         	/* Data Abort */
+                b           rsvdvec         	/* reserved */
+                b           aicvec				    /* IRQ : read the AIC */
+                b           fiqvec          	/* FIQ */
+
+undefvec:
+swivec:
+pabtvec:
+dabtvec:
+rsvdvec:
+aicvec:
+fiqvec:
+	b	undefvec
+
+reset:
+
+#define MEMEND 0x00004000
+
+/* ----------------------------
+ Setup the stack for each mode
+---------------------------- */
+
+#define IRQ_STACK_SIZE  0x10
+#define FIQ_STACK_SIZE  0x04
+#define ABT_STACK_SIZE  0x04
+#define UND_STACK_SIZE  0x04
+#define SVC_STACK_SIZE  0x10
+#define USER_STACK_SIZE 0x400
+	
+                ldr     r0,= MEMEND
+
+/*- Set up Supervisor Mode and set Supervisor Mode Stack*/
+                msr     CPSR_c, #ARM_MODE_SVC | I_BIT | F_BIT
+                mov     r13, r0                     /* Init stack Undef*/
+                sub     r0, r0, #SVC_STACK_SIZE
+
+/*- Set up Interrupt Mode and set IRQ Mode Stack*/
+                msr     CPSR_c, #ARM_MODE_IRQ | I_BIT | F_BIT
+                mov     r13, r0                     /* Init stack IRQ*/
+                sub     r0, r0, #IRQ_STACK_SIZE
+
+/*- Set up Fast Interrupt Mode and set FIQ Mode Stack*/
+                msr     CPSR_c, #ARM_MODE_FIQ | I_BIT | F_BIT
+                mov     r13, r0                     /* Init stack FIQ*/
+                sub     r0, r0, #FIQ_STACK_SIZE
+
+/*- Set up Abort Mode and set Abort Mode Stack*/
+                msr     CPSR_c, #ARM_MODE_ABORT | I_BIT | F_BIT
+                mov     r13, r0                     /* Init stack Abort*/
+                sub     r0, r0, #ABT_STACK_SIZE
+
+/*- Set up Undefined Instruction Mode and set Undef Mode Stack*/
+                msr     CPSR_c, #ARM_MODE_UNDEF | I_BIT | F_BIT
+                mov     r13, r0                     /* Init stack Undef*/
+                sub     r0, r0, #UND_STACK_SIZE
+
+/*- Set up user Mode and set System Mode Stack*/
+                msr     CPSR_c, #ARM_MODE_SYS | I_BIT | F_BIT
+                bic     r0, r0, #3                  /* Insure word alignement */
+               	mov     sp, r0                      /* Init stack System */
+
+
+		ldr       r0, = AT91F_LowLevelInit
+		mov       lr, pc
+		bx        r0
+
+/*----------------------------------------
+ Read/modify/write CP15 control register
+----------------------------------------*/
+		mrc     p15, 0, r0, c1, c0,0  /* read cp15 control registre (cp15 r1) in r0 */
+		ldr     r3,= 0xC0000080      /* Reset bit :Little Endian end fast bus mode */
+		ldr     r4,= 0xC0001000      /* Set bit :Asynchronous clock mode, Not Fast Bus, I-Cache enable */
+		bic     r0, r0, r3
+		orr     r0, r0, r4
+		mcr     p15, 0, r0, c1, c0,0 /* write r0 in cp15 control registre (cp15 r1) */
+
+/* Enable interrupts */
+		msr     CPSR_c, #ARM_MODE_SYS | F_BIT
+
+/*------------------------------------------------------------------------------
+- Branch on C code Main function (with interworking)
+----------------------------------------------------
+- Branch must be performed by an interworking call as either an ARM or Thumb
+- _start function must be supported. This makes the code not position-
+- independent. A Branch with link would generate errors
+----------------------------------------------------------------------------*/
+	
+/*- Branch to _start by interworking*/
+		ldr     r4, = main
+	        mov     lr, pc
+	        bx      r4
+	
+/*-----------------------------------------------------------------------------
+- Loop for ever
+---------------
+- End of application. Normally, never occur.
+- Could jump on Software Reset ( B 0x0 ).
+------------------------------------------------------------------------------*/
+End:
+	        b       End
diff --git a/target/linux/at91/image/dfboot/src/dataflash.c b/target/linux/at91/image/dfboot/src/dataflash.c
new file mode 100644
index 0000000..5e54460
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/dataflash.c
@@ -0,0 +1,208 @@
+/*----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
+ *----------------------------------------------------------------------------
+ * The software is delivered "AS IS" without warranty or condition of any
+ * kind, either express, implied or statutory. This includes without
+ * limitation any warranty or condition with respect to merchantability or
+ * fitness for any particular purpose, or against the infringements of
+ * intellectual property rights of others.
+ *----------------------------------------------------------------------------
+ * File Name           : dataflash.c
+ * Object              : High level functions for the dataflash
+ * Creation            : HIi   10/10/2003
+ *----------------------------------------------------------------------------
+ */
+#include "config.h"
+#include "stdio.h"
+#include "dataflash.h"
+
+
+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+static AT91S_DataFlash DataFlashInst;
+
+int cs[][CFG_MAX_DATAFLASH_BANKS] = {
+	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+};
+
+int AT91F_DataflashInit(void)
+{
+	int i;
+	int dfcode;
+	int Nb_device = 0;
+		
+	AT91F_SpiInit();
+
+	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+		dataflash_info[i].id = 0;
+		dataflash_info[i].Device.pages_number = 0;
+		dfcode = AT91F_DataflashProbe (cs[i][1], &dataflash_info[i].Desc);
+
+		switch (dfcode) {
+		case AT45DB161:
+			dataflash_info[i].Device.pages_number = 4096;
+			dataflash_info[i].Device.pages_size = 528;
+			dataflash_info[i].Device.page_offset = 10;
+			dataflash_info[i].Device.byte_mask = 0x300;
+			dataflash_info[i].Device.cs = cs[i][1];
+			dataflash_info[i].Desc.DataFlash_state = IDLE;
+			dataflash_info[i].logical_address = cs[i][0];
+			dataflash_info[i].id = dfcode;
+			Nb_device++;
+			break;
+
+		case AT45DB321:
+			dataflash_info[i].Device.pages_number = 8192;
+			dataflash_info[i].Device.pages_size = 528;
+			dataflash_info[i].Device.page_offset = 10;
+			dataflash_info[i].Device.byte_mask = 0x300;
+			dataflash_info[i].Device.cs = cs[i][1];
+			dataflash_info[i].Desc.DataFlash_state = IDLE;
+			dataflash_info[i].logical_address = cs[i][0];
+			dataflash_info[i].id = dfcode;
+			Nb_device++;
+			break;
+
+		case AT45DB642:
+			dataflash_info[i].Device.pages_number = 8192;
+			dataflash_info[i].Device.pages_size = 1056;
+			dataflash_info[i].Device.page_offset = 11;
+			dataflash_info[i].Device.byte_mask = 0x700;
+			dataflash_info[i].Device.cs = cs[i][1];
+			dataflash_info[i].Desc.DataFlash_state = IDLE;
+			dataflash_info[i].logical_address = cs[i][0];
+			dataflash_info[i].id = dfcode;
+			Nb_device++;
+			break;
+		case AT45DB128:
+			dataflash_info[i].Device.pages_number = 16384;
+			dataflash_info[i].Device.pages_size = 1056;
+			dataflash_info[i].Device.page_offset = 11;
+			dataflash_info[i].Device.byte_mask = 0x700;
+			dataflash_info[i].Device.cs = cs[i][1];
+			dataflash_info[i].Desc.DataFlash_state = IDLE;
+			dataflash_info[i].logical_address = cs[i][0];
+			dataflash_info[i].id = dfcode;
+			Nb_device++;
+			break;
+		default:
+			break;
+		}
+	}			
+	return (Nb_device);
+}
+
+
+void AT91F_DataflashPrintInfo(void)
+{
+	int i;
+	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+		if (dataflash_info[i].id != 0) {
+			printf ("DF:AT45DB");
+			switch (dataflash_info[i].id) {
+			case AT45DB161:
+				printf ("161");
+				break;
+
+			case AT45DB321:
+				printf ("321");
+				break;
+
+			case AT45DB642:
+				printf ("642");
+				break;
+			case AT45DB128:				
+				printf ("128");
+				break;
+			}
+
+			printf ("\n# PG: %6d\n"
+				"PG SZ: %6d\n"
+				"SZ=%8d bytes\n"
+				"ADDR: %08X\n",
+				(unsigned int) dataflash_info[i].Device.pages_number,
+				(unsigned int) dataflash_info[i].Device.pages_size,
+				(unsigned int) dataflash_info[i].Device.pages_number *
+				dataflash_info[i].Device.pages_size,
+				(unsigned int) dataflash_info[i].logical_address);
+		}
+	}
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataflashSelect                                  */
+/* Object              : Select the correct device                              */
+/*------------------------------------------------------------------------------*/
+static AT91PS_DataFlash AT91F_DataflashSelect(AT91PS_DataFlash pFlash,
+                                              unsigned int *addr)
+{
+	char addr_valid = 0;
+	int i;
+
+	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++)
+		if ((*addr & 0xFF000000) == dataflash_info[i].logical_address) {
+			addr_valid = 1;
+			break;
+		}
+	if (!addr_valid) {
+		pFlash = (AT91PS_DataFlash) 0;
+		return pFlash;
+	}
+	pFlash->pDataFlashDesc = &(dataflash_info[i].Desc);
+	pFlash->pDevice = &(dataflash_info[i].Device);
+	*addr -= dataflash_info[i].logical_address;
+	return (pFlash);
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : read_dataflash                                         */
+/* Object              : dataflash memory read                                  */
+/*------------------------------------------------------------------------------*/
+int read_dataflash(unsigned long addr, unsigned long size, char *result)
+{
+	unsigned int AddrToRead = addr;
+	AT91PS_DataFlash pFlash = &DataFlashInst;
+
+	pFlash = AT91F_DataflashSelect (pFlash, &AddrToRead);
+	if (pFlash == 0)
+		return -1;
+
+	return (AT91F_DataFlashRead(pFlash, AddrToRead, size, result));
+}
+
+
+/*-----------------------------------------------------------------------------*/
+/* Function Name       : write_dataflash                                       */
+/* Object              : write a block in dataflash                            */
+/*-----------------------------------------------------------------------------*/
+int write_dataflash(unsigned long addr_dest, unsigned int addr_src,
+                    unsigned int size)
+{
+	unsigned int AddrToWrite = addr_dest;
+	AT91PS_DataFlash pFlash = &DataFlashInst;
+
+	pFlash = AT91F_DataflashSelect(pFlash, &AddrToWrite);
+	if (AddrToWrite == -1)
+		return -1;
+
+	return AT91F_DataFlashWrite(pFlash, (unsigned char *) addr_src, AddrToWrite, size);
+}
+
+/*-----------------------------------------------------------------------------*/
+/* Function Name       : erase_dataflash                                       */
+/* Object              : Erase entire dataflash                                */
+/*-----------------------------------------------------------------------------*/
+int erase_dataflash(unsigned long addr_dest)
+{
+	unsigned int AddrToWrite = addr_dest;
+	AT91PS_DataFlash pFlash = &DataFlashInst;
+
+	pFlash = AT91F_DataflashSelect (pFlash, &AddrToWrite);
+	if (AddrToWrite == -1)
+		return -1;
+
+	return AT91F_DataFlashErase(pFlash);
+}
+
diff --git a/target/linux/at91/image/dfboot/src/dataflash.h b/target/linux/at91/image/dfboot/src/dataflash.h
new file mode 100644
index 0000000..8fab63f
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/dataflash.h
@@ -0,0 +1,181 @@
+//*---------------------------------------------------------------------------
+//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
+//*---------------------------------------------------------------------------
+//* The software is delivered "AS IS" without warranty or condition of any
+//* kind, either express, implied or statutory. This includes without
+//* limitation any warranty or condition with respect to merchantability or
+//* fitness for any particular purpose, or against the infringements of
+//* intellectual property rights of others.
+//*---------------------------------------------------------------------------
+//* File Name           : AT91_SpiDataFlash.h
+//* Object              : Data Flash Atmel Description File
+//* Translator          :
+//*
+//* 1.0 03/04/01 HI	: Creation
+//*
+//*---------------------------------------------------------------------------
+
+#ifndef _DataFlash_h
+#define _DataFlash_h
+
+/* Max value = 15Mhz to be compliant with the Continuous array read function */
+#ifdef	SPI_LOW_SPEED
+#define AT91C_SPI_CLK 14976000/4
+#else
+#define AT91C_SPI_CLK 14976000 
+#endif
+
+/* AC characteristics */
+/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
+
+#define DATAFLASH_TCSS (0xf << 16)	/* 250ns 15/60000000 */
+#define DATAFLASH_TCHS (0x1 << 24)	/* 250ns 32*1/60000000 */
+
+
+#define AT91C_SPI_PCS0_SERIAL_DATAFLASH		0xE     /* Chip Select 0 : NPCS0 %1110 */
+#define AT91C_SPI_PCS3_DATAFLASH_CARD		0x7     /* Chip Select 3 : NPCS3 %0111 */
+
+#define CFG_MAX_DATAFLASH_BANKS 	    2
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000
+#define CFG_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000
+
+typedef struct {
+	unsigned long base;		/* logical base address for a bank */
+	unsigned long size;		/* total bank size */
+	unsigned long page_count;
+	unsigned long page_size;
+	unsigned long id;		/* device id */
+} dataflash_info_t;
+
+typedef unsigned int AT91S_DataFlashStatus;
+
+/*----------------------------------------------------------------------*/
+/* DataFlash Structures							*/
+/*----------------------------------------------------------------------*/
+
+/*---------------------------------------------*/
+/* DataFlash Descriptor Structure Definition   */
+/*---------------------------------------------*/
+typedef struct _AT91S_DataflashDesc {
+	unsigned char *tx_cmd_pt;
+	unsigned int tx_cmd_size;
+	unsigned char *rx_cmd_pt;
+	unsigned int rx_cmd_size;
+	unsigned char *tx_data_pt;
+	unsigned int tx_data_size;
+	unsigned char *rx_data_pt;
+	unsigned int rx_data_size;
+	volatile unsigned char DataFlash_state;
+	unsigned char command[8];
+} AT91S_DataflashDesc, *AT91PS_DataflashDesc;
+
+/*---------------------------------------------*/
+/* DataFlash device definition structure       */
+/*---------------------------------------------*/
+typedef struct _AT91S_Dataflash {
+	int pages_number;			/* dataflash page number */
+	int pages_size;				/* dataflash page size */
+	int page_offset;			/* page offset in command */
+	int byte_mask;				/* byte mask in command */
+	int cs;
+} AT91S_DataflashFeatures, *AT91PS_DataflashFeatures;
+
+
+/*---------------------------------------------*/
+/* DataFlash Structure Definition	       */
+/*---------------------------------------------*/
+typedef struct _AT91S_DataFlash {
+	AT91PS_DataflashDesc pDataFlashDesc;	/* dataflash descriptor */
+	AT91PS_DataflashFeatures pDevice;	/* Pointer on a dataflash features array */
+} AT91S_DataFlash, *AT91PS_DataFlash;
+
+
+typedef struct _AT91S_DATAFLASH_INFO {
+
+	AT91S_DataflashDesc 	Desc;
+	AT91S_DataflashFeatures Device; /* Pointer on a dataflash features array */
+	unsigned long 			logical_address;
+	unsigned int 			id;			/* device id */
+} AT91S_DATAFLASH_INFO, *AT91PS_DATAFLASH_INFO;
+
+
+/*-------------------------------------------------------------------------------------------------*/
+
+#define AT45DB161		0x2c
+#define AT45DB321		0x34
+#define AT45DB642		0x3c
+#define AT45DB128		0x10
+
+#define AT91C_DATAFLASH_TIMEOUT			20000	/* For AT91F_DataFlashWaitReady */
+
+/* DataFlash return value */
+#define AT91C_DATAFLASH_BUSY			0x00
+#define AT91C_DATAFLASH_OK			0x01
+#define AT91C_DATAFLASH_ERROR			0x02
+#define AT91C_DATAFLASH_MEMORY_OVERFLOW		0x03
+#define AT91C_DATAFLASH_BAD_COMMAND		0x04
+#define AT91C_DATAFLASH_BAD_ADDRESS		0x05
+
+
+/* Driver State */
+#define IDLE		0x0
+#define BUSY		0x1
+#define ERROR		0x2
+
+/* DataFlash Driver State */
+#define GET_STATUS	0x0F
+
+/*-------------------------------------------------------------------------------------------------*/
+/* Command Definition										   */
+/*-------------------------------------------------------------------------------------------------*/
+
+/* READ COMMANDS */
+#define DB_CONTINUOUS_ARRAY_READ	0xE8	/* Continuous array read */
+#define DB_BURST_ARRAY_READ		0xE8	/* Burst array read */
+#define DB_PAGE_READ			0xD2	/* Main memory page read */
+#define DB_BUF1_READ			0xD4	/* Buffer 1 read */
+#define DB_BUF2_READ			0xD6	/* Buffer 2 read */
+#define DB_STATUS			0xD7	/* Status Register */
+
+/* PROGRAM and ERASE COMMANDS */
+#define DB_BUF1_WRITE			0x84	/* Buffer 1 write */
+#define DB_BUF2_WRITE			0x87	/* Buffer 2 write */
+#define DB_BUF1_PAGE_ERASE_PGM		0x83	/* Buffer 1 to main memory page program with built-In erase */
+#define DB_BUF1_PAGE_ERASE_FASTPGM	0x93	/* Buffer 1 to main memory page program with built-In erase, Fast program */
+#define DB_BUF2_PAGE_ERASE_PGM		0x86	/* Buffer 2 to main memory page program with built-In erase */
+#define DB_BUF2_PAGE_ERASE_FASTPGM	0x96	/* Buffer 1 to main memory page program with built-In erase, Fast program */
+#define DB_BUF1_PAGE_PGM		0x88	/* Buffer 1 to main memory page program without built-In erase */
+#define DB_BUF1_PAGE_FASTPGM		0x98	/* Buffer 1 to main memory page program without built-In erase, Fast program */
+#define DB_BUF2_PAGE_PGM		0x89	/* Buffer 2 to main memory page program without built-In erase */
+#define DB_BUF2_PAGE_FASTPGM		0x99	/* Buffer 1 to main memory page program without built-In erase, Fast program */
+#define DB_PAGE_ERASE			0x81	/* Page Erase */
+#define DB_BLOCK_ERASE			0x50	/* Block Erase */
+#define DB_PAGE_PGM_BUF1		0x82	/* Main memory page through buffer 1 */
+#define DB_PAGE_FASTPGM_BUF1		0x92	/* Main memory page through buffer 1, Fast program */
+#define DB_PAGE_PGM_BUF2		0x85	/* Main memory page through buffer 2 */
+#define DB_PAGE_FastPGM_BUF2		0x95	/* Main memory page through buffer 2, Fast program */
+
+/* ADDITIONAL COMMANDS */
+#define DB_PAGE_2_BUF1_TRF		0x53	/* Main memory page to buffer 1 transfert */
+#define DB_PAGE_2_BUF2_TRF		0x55	/* Main memory page to buffer 2 transfert */
+#define DB_PAGE_2_BUF1_CMP		0x60	/* Main memory page to buffer 1 compare */
+#define DB_PAGE_2_BUF2_CMP		0x61	/* Main memory page to buffer 2 compare */
+#define DB_AUTO_PAGE_PGM_BUF1		0x58	/* Auto page rewrite throught buffer 1 */
+#define DB_AUTO_PAGE_PGM_BUF2		0x59	/* Auto page rewrite throught buffer 2 */
+
+/*-------------------------------------------------------------------------------------------------*/
+
+extern AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+
+extern void AT91F_SpiInit(void);
+extern int AT91F_DataflashProbe(int i, AT91PS_DataflashDesc pDesc);
+extern int AT91F_DataFlashRead(AT91PS_DataFlash, unsigned long , unsigned long, char *);
+extern AT91S_DataFlashStatus AT91F_DataFlashWrite(AT91PS_DataFlash ,unsigned char *, int, int);
+extern AT91S_DataFlashStatus AT91F_DataFlashErase(AT91PS_DataFlash pDataFlash);
+extern int AT91F_DataflashInit(void);
+extern void AT91F_DataflashPrintInfo(void);
+extern int read_dataflash(unsigned long addr, unsigned long size, char *result);
+extern int write_dataflash(unsigned long addr_dest, unsigned int addr_src, unsigned int size);
+extern int erase_dataflash(unsigned long addr_dest);
+
+#endif
diff --git a/target/linux/at91/image/dfboot/src/div0.c b/target/linux/at91/image/dfboot/src/div0.c
new file mode 100644
index 0000000..d6fd90e
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/div0.c
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Replacement (=dummy) for GNU/Linux division-by zero handler */
+void __div0 (void)
+{
+	while(-1);
+}
diff --git a/target/linux/at91/image/dfboot/src/elf32-littlearm.lds b/target/linux/at91/image/dfboot/src/elf32-littlearm.lds
new file mode 100644
index 0000000..4d4efb6
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/elf32-littlearm.lds
@@ -0,0 +1,19 @@
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+        . = 0x00000000;
+
+        . = ALIGN(4);
+        .text : { *(.text) }
+
+        . = ALIGN(4);
+        .rodata : { *(.rodata) }
+
+        . = ALIGN(4);
+        .data : { *(.data) }
+
+        . = ALIGN(4);
+        .bss : { *(.bss) }
+}
\ No newline at end of file
diff --git a/target/linux/at91/image/dfboot/src/embedded_services.h b/target/linux/at91/image/dfboot/src/embedded_services.h
new file mode 100644
index 0000000..956b9ed
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/embedded_services.h
@@ -0,0 +1,500 @@
+//*----------------------------------------------------------------------------
+//*      ATMEL Microcontroller Software Support  -  ROUSSET  -
+//*----------------------------------------------------------------------------
+//* The software is delivered "AS IS" without warranty or condition of any
+//* kind, either express, implied or statutory. This includes without
+//* limitation any warranty or condition with respect to merchantability or
+//* fitness for any particular purpose, or against the infringements of
+//* intellectual property rights of others.
+//*----------------------------------------------------------------------------
+//* File Name           : embedded_sevices.h
+//* Object              : Header File with all the embedded software services definitions
+//*
+//* 1.0 24 Jan 2003 FB  : Creation
+//*----------------------------------------------------------------------------
+#ifndef embedded_sevices_h
+#define embedded_sevices_h
+
+#include "AT91RM9200.h"
+
+#define AT91C_BASE_ROM	(char *)0x00100000
+
+/* Return values */
+#define AT91C_BUFFER_SUCCESS		   0
+#define AT91C_BUFFER_ERROR_SHIFT      16
+#define AT91C_BUFFER_ERROR            (0x0F << AT91C_BUFFER_ERROR_SHIFT)
+
+#define AT91C_BUFFER_OVERFLOW         (0x01 << AT91C_BUFFER_ERROR_SHIFT)
+#define AT91C_BUFFER_UNDERRUN         (0x02 << AT91C_BUFFER_ERROR_SHIFT)
+
+typedef unsigned int AT91S_BufferStatus;
+
+struct _AT91S_Pipe;
+
+// This structure is a virtual object of a buffer
+typedef struct _AT91S_Buffer
+{
+	struct _AT91S_Pipe *pPipe;
+	void *pChild;
+
+	// Functions invoked by the pipe
+	AT91S_BufferStatus (*SetRdBuffer)     (struct _AT91S_Buffer *pSBuffer, char *pBuffer, unsigned int Size);
+	AT91S_BufferStatus (*SetWrBuffer)     (struct _AT91S_Buffer *pSBuffer, char const *pBuffer, unsigned int Size);
+	AT91S_BufferStatus (*RstRdBuffer)     (struct _AT91S_Buffer *pSBuffer);
+	AT91S_BufferStatus (*RstWrBuffer)     (struct _AT91S_Buffer *pSBuffer);
+	char (*MsgWritten)      (struct _AT91S_Buffer *pSBuffer, char const *pBuffer);
+	char (*MsgRead)         (struct _AT91S_Buffer *pSBuffer, char const *pBuffer);
+	// Functions invoked by the peripheral
+	AT91S_BufferStatus (*GetWrBuffer)     (struct _AT91S_Buffer *pSBuffer, char const **pData, unsigned int *pSize);
+	AT91S_BufferStatus (*GetRdBuffer)     (struct _AT91S_Buffer *pSBuffer, char **pData, unsigned int *pSize);
+	AT91S_BufferStatus (*EmptyWrBuffer)   (struct _AT91S_Buffer *pSBuffer, unsigned int size);
+	AT91S_BufferStatus (*FillRdBuffer)    (struct _AT91S_Buffer *pSBuffer, unsigned int size);
+	char (*IsWrEmpty)      (struct _AT91S_Buffer *pSBuffer);
+	char (*IsRdFull)       (struct _AT91S_Buffer *pSBuffer);
+} AT91S_Buffer, *AT91PS_Buffer;
+
+// ===========================================================================================
+// SimpleBuffer definition
+//
+// This structure is pointed by pRealBuffer field in the SBuffer
+// It contains usefull information for a real implementation of
+// a SBuffer object.
+// The application just create an instance of SSBUffer and SBuffer,
+// call OpenSimpleBuffer, and continue using SBuffer instance
+
+typedef struct _AT91S_SBuffer
+{
+	AT91S_Buffer parent;
+	char         *pRdBuffer;
+	char const   *pWrBuffer;
+	unsigned int szRdBuffer;
+	unsigned int szWrBuffer;
+	unsigned int stRdBuffer;
+	unsigned int stWrBuffer;
+} AT91S_SBuffer, *AT91PS_SBuffer;
+
+typedef AT91PS_Buffer (*AT91PF_OpenSBuffer) (AT91PS_SBuffer);
+
+// This function is called by the application
+extern AT91PS_Buffer AT91F_OpenSBuffer(AT91PS_SBuffer pBuffer);
+
+// Functions invoked by the pipe
+extern AT91S_BufferStatus AT91F_SbSetRdBuffer  (AT91PS_Buffer pBuffer, char *pData, unsigned int Size);
+extern AT91S_BufferStatus AT91F_SbSetWrBuffer  (AT91PS_Buffer pBuffer, char const *pData, unsigned int Size);
+extern AT91S_BufferStatus AT91F_SbRstRdBuffer  (AT91PS_Buffer pBuffer);
+extern AT91S_BufferStatus AT91F_SbRstWrBuffer  (AT91PS_Buffer pBuffer);
+extern char AT91F_SbMsgWritten   (AT91PS_Buffer pBuffer, char const *pMsg);
+extern char AT91F_SbMsgRead      (AT91PS_Buffer pBuffer, char const *pMsg);
+// Functions invoked by the peripheral
+extern AT91S_BufferStatus AT91F_SbGetWrBuffer  (AT91PS_Buffer pBuffer, char const **pData, unsigned int *pSize);
+extern AT91S_BufferStatus AT91F_SbGetRdBuffer  (AT91PS_Buffer pBuffer, char **pData, unsigned int *pSize);
+extern AT91S_BufferStatus AT91F_SbEmptyWrBuffer(AT91PS_Buffer pBuffer, unsigned int size);
+extern AT91S_BufferStatus AT91F_SbFillRdBuffer (AT91PS_Buffer pBuffer, unsigned int size);
+extern char AT91F_SbIsWrEmpty   (AT91PS_Buffer pBuffer);
+extern char AT91F_SbIsRdFull    (AT91PS_Buffer pBuffer);
+
+#ifdef DBG_DRV_BUFFER
+extern char const *AT91F_SbGetError(AT91S_BufferStatus errorNumber);
+#endif
+
+
+#define AT91C_OPEN_CTRLTEMPO_SUCCESS	0
+#define AT91C_ERROR_OPEN_CTRLTEMPO		1
+#define AT91C_START_OK					2
+#define AT91C_STOP_OK					3
+#define AT91C_TIMEOUT_REACHED			4
+
+typedef enum _AT91E_SvcTempo {
+	AT91E_SVCTEMPO_DIS,
+	AT91E_SVCTEMPO_EN
+} AT91E_SvcTempo;
+
+typedef unsigned int AT91S_TempoStatus;
+
+// AT91S_SvcTempo
+typedef struct _AT91S_SvcTempo
+{
+
+	// Methods:
+	AT91S_TempoStatus (*Start)  (
+		struct _AT91S_SvcTempo *pSvc,
+		unsigned int timeout,
+		unsigned int reload,
+		void (*callback) (AT91S_TempoStatus, void *),
+		void *pData);
+	AT91S_TempoStatus (*Stop)   (struct _AT91S_SvcTempo *pSvc);
+
+	struct _AT91S_SvcTempo *pPreviousTempo;
+	struct _AT91S_SvcTempo *pNextTempo;
+
+	// Data
+	unsigned int TickTempo;	//* timeout value
+	unsigned int ReloadTempo;//* Reload value for periodic execution
+	void (*TempoCallback)(AT91S_TempoStatus, void *);
+	void *pPrivateData;
+	AT91E_SvcTempo flag;
+} AT91S_SvcTempo, *AT91PS_SvcTempo;
+
+
+// AT91S_CtrlTempo
+typedef struct _AT91S_CtlTempo
+{
+	// Members:
+
+	// Start and stop for Timer	hardware
+	AT91S_TempoStatus (*CtlTempoStart)  (void *pTimer);
+	AT91S_TempoStatus (*CtlTempoStop)   (void *pTimer);
+
+	// Start and stop for Tempo service
+	AT91S_TempoStatus (*SvcTempoStart)  (
+		struct _AT91S_SvcTempo *pSvc,
+		unsigned int timeout,
+		unsigned int reload,
+		void (*callback) (AT91S_TempoStatus, void *),
+		void *pData);
+	AT91S_TempoStatus (*SvcTempoStop)   (struct _AT91S_SvcTempo *pSvc);
+	AT91S_TempoStatus (*CtlTempoSetTime)(struct _AT91S_CtlTempo *pCtrl, unsigned int NewTime);
+	AT91S_TempoStatus (*CtlTempoGetTime)(struct _AT91S_CtlTempo *pCtrl);
+	AT91S_TempoStatus (*CtlTempoIsStart)(struct _AT91S_CtlTempo *pCtrl);
+	AT91S_TempoStatus (*CtlTempoCreate) (
+								struct _AT91S_CtlTempo *pCtrl,
+								struct _AT91S_SvcTempo *pTempo);
+	AT91S_TempoStatus (*CtlTempoRemove) (
+								struct _AT91S_CtlTempo *pCtrl,
+								struct _AT91S_SvcTempo *pTempo);
+	AT91S_TempoStatus (*CtlTempoTick)   (struct _AT91S_CtlTempo *pCtrl);
+
+	// Data:
+
+	void *pPrivateData;     // Pointer to devived class
+	void const *pTimer;			// hardware
+	AT91PS_SvcTempo pFirstTempo;
+	AT91PS_SvcTempo pNewTempo;
+} AT91S_CtlTempo, *AT91PS_CtlTempo;
+typedef AT91S_TempoStatus (*AT91PF_OpenCtlTempo)   ( AT91PS_CtlTempo, void const *);
+
+// This function is called by the application.
+extern AT91S_TempoStatus AT91F_OpenCtlTempo( AT91PS_CtlTempo pCtrlTempo, void const *pTempoTimer );
+
+extern AT91S_TempoStatus AT91F_STStart   (void *);
+extern AT91S_TempoStatus AT91F_STStop    (void *);
+extern AT91S_TempoStatus AT91F_STSetTime (AT91PS_CtlTempo, unsigned int);
+extern AT91S_TempoStatus AT91F_STGetTime (AT91PS_CtlTempo);
+extern AT91S_TempoStatus AT91F_STIsStart (AT91PS_CtlTempo);
+extern AT91S_TempoStatus AT91F_CtlTempoCreate (AT91PS_CtlTempo, AT91PS_SvcTempo);
+extern AT91S_TempoStatus AT91F_CtlTempoRemove (AT91PS_CtlTempo, AT91PS_SvcTempo);
+extern AT91S_TempoStatus AT91F_CtlTempoTick   (AT91PS_CtlTempo);
+extern AT91S_TempoStatus AT91F_SvcTempoStart (
+		AT91PS_SvcTempo pSvc,
+		unsigned int timeout,
+		unsigned int reload,
+		void (*callback) (AT91S_TempoStatus, void *),
+		void *pData);
+extern AT91S_TempoStatus AT91F_SvcTempoStop (AT91PS_SvcTempo);
+
+
+// Following types are defined in another header files
+struct _AT91S_Buffer;
+
+// Constants:
+#define AT91C_COMMSVC_SUCCESS     0
+#define AT91C_COMMSVC_ERROR_SHIFT 8
+#define AT91C_COMMSVC_ERROR       (0x0f << AT91C_COMMSVC_ERROR_SHIFT)
+
+typedef unsigned int AT91S_SvcCommStatus;
+
+// AT91S_Service definition
+// This structure is an abstraction of a communication peripheral
+typedef struct _AT91S_Service
+{
+	// Methods:
+	AT91S_SvcCommStatus (*Reset)  (struct _AT91S_Service *pService);
+	AT91S_SvcCommStatus (*StartTx)(struct _AT91S_Service *pService);
+	AT91S_SvcCommStatus (*StartRx)(struct _AT91S_Service *pService);
+	AT91S_SvcCommStatus (*StopTx) (struct _AT91S_Service *pService);
+	AT91S_SvcCommStatus (*StopRx) (struct _AT91S_Service *pService);
+	char                (*TxReady)(struct _AT91S_Service *pService);
+	char                (*RxReady)(struct _AT91S_Service *pService);
+	// Data:
+	struct _AT91S_Buffer *pBuffer; // Link to a buffer object
+	void *pChild;
+} AT91S_SvcComm, *AT91PS_SvcComm;
+
+// Constants:
+#define AT91C_XMODEM_SOH         0x01         /* Start of Heading for 128 bytes */
+#define AT91C_XMODEM_STX         0x02         /* Start of heading for 1024 bytes */
+#define AT91C_XMODEM_EOT         0x04         /* End of transmission */
+#define AT91C_XMODEM_ACK         0x06         /* Acknowledge */
+#define AT91C_XMODEM_NAK         0x15         /* Negative Acknowledge */
+#define AT91C_XMODEM_CRCCHR      'C'
+
+#define AT91C_XMODEM_PACKET_SIZE 2                 // packet + packetCRC
+#define AT91C_XMODEM_CRC_SIZE    2                 // crcLSB + crcMSB
+#define AT91C_XMODEM_DATA_SIZE_SOH    128          // data 128 corresponding to SOH header
+#define AT91C_XMODEM_DATA_SIZE_STX    1024         // data 1024 corresponding to STX header
+
+//* Following structure is used by SPipe to refer to the USB device peripheral endpoint
+typedef struct _AT91PS_SvcXmodem {
+
+	// Public Methods:
+	AT91S_SvcCommStatus (*Handler) (struct _AT91PS_SvcXmodem *, unsigned int);
+	AT91S_SvcCommStatus (*StartTx) (struct _AT91PS_SvcXmodem *, unsigned int);
+	AT91S_SvcCommStatus (*StopTx)  (struct _AT91PS_SvcXmodem *, unsigned int);
+
+	// Private Methods:
+	AT91S_SvcCommStatus (*ReadHandler)  (struct _AT91PS_SvcXmodem *, unsigned int csr);
+	AT91S_SvcCommStatus (*WriteHandler) (struct _AT91PS_SvcXmodem *, unsigned int csr);
+	unsigned short      (*GetCrc)       (char *ptr, unsigned int count);
+	char                (*CheckHeader)  (unsigned char currentPacket, char *packet);
+	char                (*CheckData)    (struct _AT91PS_SvcXmodem *);
+
+	AT91S_SvcComm  parent;      // Base class
+	AT91PS_USART  pUsart;
+
+	AT91S_SvcTempo tempo; // Link to a AT91S_Tempo object
+
+	char          *pData;
+	unsigned int  dataSize;        // = XMODEM_DATA_STX or XMODEM_DATA_SOH
+	char          packetDesc[AT91C_XMODEM_PACKET_SIZE];
+	unsigned char packetId;         // Current packet
+	char          packetStatus;
+	char          isPacketDesc;
+	char          eot;            // end of transmition
+} AT91S_SvcXmodem, *AT91PS_SvcXmodem;
+
+typedef AT91PS_SvcComm      (*AT91PF_OpenSvcXmodem) ( AT91PS_SvcXmodem, AT91PS_USART, AT91PS_CtlTempo);
+
+// This function is called by the application.
+extern AT91PS_SvcComm AT91F_OpenSvcXmodem( AT91PS_SvcXmodem, AT91PS_USART, AT91PS_CtlTempo);
+
+extern unsigned short AT91F_SvcXmodemGetCrc     (char *ptr, unsigned int count);
+extern char           AT91F_SvcXmodemCheckHeader(unsigned char currentPacket, char *packet);
+extern char           AT91F_SvcXmodemCheckData  (AT91PS_SvcXmodem pSvcXmodem);
+extern AT91S_SvcCommStatus AT91F_SvcXmodemReadHandler(AT91PS_SvcXmodem pSvcXmodem, unsigned int csr);
+extern AT91S_SvcCommStatus AT91F_SvcXmodemWriteHandler(AT91PS_SvcXmodem pSvcXmodem, unsigned int csr);
+extern AT91S_SvcCommStatus AT91F_SvcXmodemStartTx(AT91PS_SvcComm pSvcComm);
+extern AT91S_SvcCommStatus AT91F_SvcXmodemStopTx(AT91PS_SvcComm pSvcComm);
+extern AT91S_SvcCommStatus AT91F_SvcXmodemStartRx(AT91PS_SvcComm pSvcComm);
+extern AT91S_SvcCommStatus AT91F_SvcXmodemStopRx(AT91PS_SvcComm pSvcComm);
+extern char AT91F_SvcXmodemTxReady(AT91PS_SvcComm pService);
+extern char AT91F_SvcXmodemRxReady(AT91PS_SvcComm pSvcComm);
+
+
+// Constants:
+#define AT91C_PIPE_SUCCESS	      0
+#define AT91C_PIPE_ERROR_SHIFT    8
+#define AT91C_PIPE_ERROR          (0x0F << AT91C_PIPE_ERROR_SHIFT)
+
+#define AT91C_PIPE_OPEN_FAILED    (1 << AT91C_PIPE_ERROR_SHIFT)
+#define AT91C_PIPE_WRITE_FAILED   (2 << AT91C_PIPE_ERROR_SHIFT)
+#define AT91C_PIPE_WRITE_ABORTED  (3 << AT91C_PIPE_ERROR_SHIFT)
+#define AT91C_PIPE_READ_FAILED    (4 << AT91C_PIPE_ERROR_SHIFT)
+#define AT91C_PIPE_READ_ABORTED   (5 << AT91C_PIPE_ERROR_SHIFT)
+#define AT91C_PIPE_ABORT_FAILED   (6 << AT91C_PIPE_ERROR_SHIFT)
+#define AT91C_PIPE_RESET_FAILED   (7 << AT91C_PIPE_ERROR_SHIFT)
+
+/* _AT91S_Pipe stucture */
+typedef unsigned int AT91S_PipeStatus;
+
+typedef struct _AT91S_Pipe
+{
+	// A pipe is linked with a peripheral and a buffer
+	AT91PS_SvcComm pSvcComm;
+	AT91PS_Buffer  pBuffer;
+
+	// Callback functions with their arguments
+	void (*WriteCallback) (AT91S_PipeStatus, void *);
+	void (*ReadCallback)  (AT91S_PipeStatus, void *);
+	void *pPrivateReadData;
+	void *pPrivateWriteData;
+
+	// Pipe methods
+	AT91S_PipeStatus (*Write) (
+		struct _AT91S_Pipe   *pPipe,
+		char const *         pData,
+		unsigned int         size,
+		void                 (*callback) (AT91S_PipeStatus, void *),
+		void                 *privateData);
+	AT91S_PipeStatus (*Read) (
+		struct _AT91S_Pipe  *pPipe,
+		char                *pData,
+		unsigned int        size,
+		void                (*callback) (AT91S_PipeStatus, void *),
+		void                *privateData);
+	AT91S_PipeStatus (*AbortWrite) (
+		struct _AT91S_Pipe  *pPipe);
+	AT91S_PipeStatus (*AbortRead) (
+		struct _AT91S_Pipe *pPipe);
+	AT91S_PipeStatus (*Reset) (
+		struct _AT91S_Pipe *pPipe);
+	char (*IsWritten) (
+		struct _AT91S_Pipe *pPipe,
+		char const *pVoid);
+	char (*IsReceived) (
+		struct _AT91S_Pipe *pPipe,
+		char const *pVoid);
+} AT91S_Pipe, *AT91PS_Pipe;
+
+// types used in AT91S_Pipe
+typedef AT91PS_Pipe (*AT91PF_OpenPipe)   (AT91PS_Pipe, AT91PS_SvcComm, AT91PS_Buffer);
+typedef void (*AT91PF_PipeWriteCallBack) (AT91S_PipeStatus, void *);
+typedef void (*AT91PF_PipeReadCallBack)  (AT91S_PipeStatus, void *);
+typedef AT91S_PipeStatus (*AT91PF_PipeWrite) (AT91PS_Pipe, char const *, unsigned int, void (*) (AT91S_PipeStatus, void *),	void *);
+typedef AT91S_PipeStatus (*AT91PF_PipeRead)  (AT91PS_Pipe, char const *, unsigned int, void (*) (AT91S_PipeStatus, void *),	void *);
+typedef AT91S_PipeStatus (*AT91PF_PipeAbortWrite) (AT91PS_Pipe);
+typedef AT91S_PipeStatus (*AT91PF_PipeAbortRead)  (AT91PS_Pipe);
+typedef AT91S_PipeStatus (*AT91PF_PipeReset)      (AT91PS_Pipe);
+typedef char (*AT91PF_PipeIsWritten)              (AT91PS_Pipe, char const *);
+typedef char (*AT91PF_PipeIsReceived)             (AT91PS_Pipe, char const *);
+
+// This function is called by the application
+extern AT91PS_Pipe AT91F_OpenPipe(
+	AT91PS_Pipe    pPipe,
+	AT91PS_SvcComm pSvcComm,
+	AT91PS_Buffer  pBuffer);
+
+// Following functions are called through AT91S_Pipe pointers
+
+extern AT91S_PipeStatus AT91F_PipeWrite(
+	AT91PS_Pipe pPipe,
+	char const *pVoid,
+	unsigned int size,
+	AT91PF_PipeWriteCallBack callback,
+	void *privateData);
+extern AT91S_PipeStatus AT91F_PipeRead(
+	AT91PS_Pipe pPipe,
+	char *pVoid,
+	unsigned int Size,
+	AT91PF_PipeReadCallBack callback,
+	void *privateData);
+extern AT91S_PipeStatus AT91F_PipeAbortWrite(AT91PS_Pipe pPipe);
+extern AT91S_PipeStatus AT91F_PipeAbortRead(AT91PS_Pipe pPipe);
+extern AT91S_PipeStatus AT91F_PipeReset(AT91PS_Pipe pPipe);
+extern char AT91F_PipeMsgWritten(AT91PS_Pipe pPipe, char const *pVoid);
+extern char AT91F_PipeMsgReceived(AT91PS_Pipe pPipe, char const *pVoid);
+
+#ifdef DBG_DRV_PIPE
+// This function parse the error number and return a string
+// describing the error message
+extern char const *AT91F_PipeGetError(AT91S_PipeStatus msgId);
+#endif
+
+extern const unsigned char bit_rev[256];
+
+extern void CalculateCrc32(const unsigned char *,unsigned int, unsigned int *);
+extern void CalculateCrc16(const unsigned char *, unsigned int , unsigned short *); 
+extern void CalculateCrcHdlc(const unsigned char *, unsigned int, unsigned short *);
+extern void CalculateCrc16ccitt(const unsigned char *, unsigned int , unsigned short *);
+
+typedef const unsigned char* AT91PS_SVC_CRC_BIT_REV ;
+
+typedef void  (*AT91PF_SVC_CRC32)   (const unsigned char *, unsigned int, unsigned int *);
+typedef void  (*AT91PF_SVC_CRC16)   (const unsigned char *, unsigned int, unsigned short *);
+typedef void  (*AT91PF_SVC_CRCHDLC) (const unsigned char *, unsigned int, unsigned short *);
+typedef	void  (*AT91PF_SVC_CRCCCITT)(const unsigned char *, unsigned int , unsigned short *);
+
+
+typedef short (*AT91PF_Sinus) (int angle);
+typedef const short * AT91PS_SINE_TAB;
+
+extern short AT91F_Sinus(int angle);
+extern const short AT91C_SINUS180_TAB[256];
+
+
+typedef void (TypeAICHandler) (void) ;
+
+
+// ROM BOOT Structure Element Definition (liv v2)
+typedef struct _AT91S_MEMCDesc
+{
+    AT91PS_MC		memc_base ;		/* Peripheral base */
+    unsigned char	periph_id ;		/* MC Peripheral Identifier */
+} AT91S_MEMCDesc, *AT91PS_MEMCDesc ;
+
+typedef struct _AT91S_Pio2Desc
+{
+   AT91PS_PIO      pio_base ;       /* Base Address */
+   unsigned char   periph_id ;      /* Peripheral Identifier */
+   unsigned char   pio_number ;     /* Total Pin Number */
+} AT91S_Pio2Desc, *AT91PS_Pio2Desc ;
+
+typedef struct _AT91S_SPIDesc
+{
+    AT91PS_SPI         		spi_base ;
+    const AT91PS_PIO        pio_base ;
+    unsigned char           periph_id ;
+    unsigned char           pin_spck ;
+    unsigned char           pin_miso ;
+    unsigned char           pin_mosi ;
+    unsigned char           pin_npcs[4] ;
+} AT91S_SPIDesc, *AT91PS_SPIDesc ;
+
+typedef struct _AT91S_USART2Desc
+{
+    AT91PS_USART           	usart_base ;   	/* Peripheral base */
+    const AT91PS_PIO   		pio_base ;     	/* IO controller descriptor */
+    unsigned int            pin_rxd ;       /* RXD pin number in the PIO */
+    unsigned int            pin_txd ;       /* TXD pin number in the PIO */
+    unsigned int            pin_sck ;       /* SCK pin number in the PIO */
+    unsigned int            pin_rts ;       /* RTS pin number in the PIO */
+    unsigned int            pin_cts ;       /* CTS pin number in the PIO */
+    unsigned int            pin_dtr ;       /* DTR pin number in the PIO */
+    unsigned int            pin_ri ;        /* RI pin number in the PIO */
+    unsigned int            pin_dsr ;       /* DSR pin number in the PIO */
+    unsigned int            pin_dcd ;       /* DCD pin number in the PIO */
+    unsigned int            periph_id ;     /* USART Peripheral Identifier */
+} AT91S_USART2Desc, *AT91PS_USART2Desc ;
+
+typedef struct _AT91S_TWIDesc
+{
+    AT91PS_TWI 				TWI_base ;
+    const AT91PS_PIO        pio_base ;
+    unsigned int			pin_sck ;
+    unsigned int			pin_sda ;
+    unsigned int 			periph_id;
+}AT91S_TWIDesc, *AT91PS_TWIDesc;
+
+typedef struct _AT91S_STDesc
+{
+    AT91PS_ST  		st_base ;          	/* Peripheral base address */
+    TypeAICHandler  *AsmSTHandler ;     /* Assembly interrupt handler */
+    unsigned char   PeriphId ;          /* Peripheral Identifier */
+} AT91S_STDesc, *AT91PS_STDesc;
+
+typedef struct _AT91S_RomBoot {
+	const unsigned int     version;
+	// Peripheral descriptors
+	const AT91S_MEMCDesc   MEMC_DESC;
+	const AT91S_STDesc     SYSTIMER_DESC;
+	const AT91S_Pio2Desc   PIOA_DESC;
+	const AT91S_Pio2Desc   PIOB_DESC;
+	const AT91S_USART2Desc DBGU_DESC;
+	const AT91S_USART2Desc USART0_DESC;
+	const AT91S_USART2Desc USART1_DESC;
+	const AT91S_USART2Desc USART2_DESC;
+	const AT91S_USART2Desc USART3_DESC;
+	const AT91S_TWIDesc    TWI_DESC;
+	const AT91S_SPIDesc    SPI_DESC;
+
+	// Objects entry
+	const AT91PF_OpenPipe      		OpenPipe;
+	const AT91PF_OpenSBuffer   		OpenSBuffer;
+	const unsigned int				reserved1;
+	const AT91PF_OpenSvcXmodem 		OpenSvcXmodem;
+	const AT91PF_OpenCtlTempo  		OpenCtlTempo;
+	const unsigned int				reserved2;
+	const unsigned int				reserved3;
+	const unsigned int				reserved4;
+	const AT91PF_SVC_CRC16			CRC16;
+	const AT91PF_SVC_CRCCCITT		CRCCCITT;
+	const AT91PF_SVC_CRCHDLC		CRCHDLC;
+	const AT91PF_SVC_CRC32			CRC32;
+	const AT91PS_SVC_CRC_BIT_REV	Bit_Reverse_Array;
+	const AT91PS_SINE_TAB			SineTab; 
+	const AT91PF_Sinus              Sine;
+} AT91S_RomBoot, *AT91PS_RomBoot;
+
+#define AT91C_ROM_BOOT_ADDRESS ((const AT91S_RomBoot *) ( *((unsigned int *) (AT91C_BASE_ROM + 0x20))) )
+
+#endif
+
diff --git a/target/linux/at91/image/dfboot/src/include/AT91C_MCI_Device.h b/target/linux/at91/image/dfboot/src/include/AT91C_MCI_Device.h
new file mode 100644
index 0000000..43d5835
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/include/AT91C_MCI_Device.h
@@ -0,0 +1,379 @@
+//*---------------------------------------------------------------------------
+//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
+//*---------------------------------------------------------------------------
+//* The software is delivered "AS IS" without warranty or condition of any
+//* kind, either express, implied or statutory. This includes without
+//* limitation any warranty or condition with respect to merchantability or
+//* fitness for any particular purpose, or against the infringements of
+//* intellectual property rights of others.
+//*---------------------------------------------------------------------------
+//* File Name           : AT91C_MCI_Device.h
+//* Object              : Data Flash Atmel Description File
+//* Translator          :
+//*
+//* 1.0 26/11/02 FB		: Creation
+//*---------------------------------------------------------------------------
+
+#ifndef AT91C_MCI_Device_h
+#define AT91C_MCI_Device_h
+
+#include "AT91RM9200.h"
+#include "lib_AT91RM9200.h"
+
+typedef unsigned int AT91S_MCIDeviceStatus;
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define AT91C_CARD_REMOVED			0
+#define AT91C_MMC_CARD_INSERTED		1
+#define AT91C_SD_CARD_INSERTED		2
+
+#define AT91C_NO_ARGUMENT			0x0
+
+#define AT91C_FIRST_RCA				0xCAFE
+#define AT91C_MAX_MCI_CARDS			10
+
+#define AT91C_BUS_WIDTH_1BIT		0x00
+#define AT91C_BUS_WIDTH_4BITS		0x02
+
+/* Driver State */
+#define AT91C_MCI_IDLE       		0x0
+#define AT91C_MCI_TIMEOUT_ERROR		0x1
+#define AT91C_MCI_RX_SINGLE_BLOCK	0x2
+#define AT91C_MCI_RX_MULTIPLE_BLOCK	0x3
+#define AT91C_MCI_RX_STREAM			0x4
+#define AT91C_MCI_TX_SINGLE_BLOCK	0x5
+#define AT91C_MCI_TX_MULTIPLE_BLOCK	0x6
+#define AT91C_MCI_TX_STREAM 		0x7
+
+/* TimeOut */
+#define AT91C_TIMEOUT_CMDRDY		30
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+// MMC & SDCard Structures 
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+
+/*-----------------------------------------------*/
+/* SDCard Device Descriptor Structure Definition */
+/*-----------------------------------------------*/
+typedef struct	_AT91S_MciDeviceDesc
+{
+    volatile unsigned char	state;
+	unsigned char			SDCard_bus_width;
+
+} AT91S_MciDeviceDesc, *AT91PS_MciDeviceDesc;
+
+/*---------------------------------------------*/
+/* MMC & SDCard Structure Device Features	   */
+/*---------------------------------------------*/
+typedef struct	_AT91S_MciDeviceFeatures
+{
+    unsigned char	Card_Inserted;				// (0=AT91C_CARD_REMOVED) (1=AT91C_MMC_CARD_INSERTED) (2=AT91C_SD_CARD_INSERTED)
+    unsigned int 	Relative_Card_Address;		// RCA
+	unsigned int 	Max_Read_DataBlock_Length;	// 2^(READ_BL_LEN) in CSD 
+	unsigned int 	Max_Write_DataBlock_Length;	// 2^(WRITE_BL_LEN) in CSD
+	unsigned char	Read_Partial;				// READ_BL_PARTIAL
+	unsigned char	Write_Partial;				// WRITE_BL_PARTIAL
+	unsigned char	Erase_Block_Enable;			// ERASE_BLK_EN
+	unsigned char	Read_Block_Misalignment;	// READ_BLK_MISALIGN
+	unsigned char	Write_Block_Misalignment;	// WRITE_BLK_MISALIGN
+	unsigned char	Sector_Size;				// SECTOR_SIZE
+	unsigned int	Memory_Capacity;			// Size in bits of the device
+	
+}	AT91S_MciDeviceFeatures, *AT91PS_MciDeviceFeatures ;
+
+/*---------------------------------------------*/
+/* MCI Device Structure Definition 			   */
+/*---------------------------------------------*/
+typedef struct _AT91S_MciDevice
+{
+	AT91PS_MciDeviceDesc		 	pMCI_DeviceDesc;	// MCI device descriptor
+	AT91PS_MciDeviceFeatures		pMCI_DeviceFeatures;// Pointer on a MCI device features array  
+}AT91S_MciDevice, *AT91PS_MciDevice;
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+// MCI_CMD Register Value 
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+#define AT91C_POWER_ON_INIT						(0	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_INIT | AT91C_MCI_OPDCMD)
+
+/////////////////////////////////////////////////////////////////	
+// Class 0 & 1 commands: Basic commands and Read Stream commands
+/////////////////////////////////////////////////////////////////
+
+#define AT91C_GO_IDLE_STATE_CMD					(0 	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE )
+#define AT91C_MMC_GO_IDLE_STATE_CMD				(0 	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE  | AT91C_MCI_OPDCMD)
+#define AT91C_MMC_SEND_OP_COND_CMD				(1	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 | AT91C_MCI_OPDCMD)
+#define AT91C_ALL_SEND_CID_CMD					(2	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_136 )
+#define AT91C_MMC_ALL_SEND_CID_CMD				(2	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_136 | AT91C_MCI_OPDCMD)
+#define AT91C_SET_RELATIVE_ADDR_CMD				(3	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48		| AT91C_MCI_MAXLAT )
+#define AT91C_MMC_SET_RELATIVE_ADDR_CMD			(3	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48		| AT91C_MCI_MAXLAT | AT91C_MCI_OPDCMD)
+
+#define AT91C_SET_DSR_CMD						(4	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_NO		| AT91C_MCI_MAXLAT )	// no tested
+
+#define AT91C_SEL_DESEL_CARD_CMD				(7	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48  		| AT91C_MCI_MAXLAT )
+#define AT91C_SEND_CSD_CMD						(9	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_136 		| AT91C_MCI_MAXLAT )
+#define AT91C_SEND_CID_CMD						(10	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_136 		| AT91C_MCI_MAXLAT )
+#define AT91C_MMC_READ_DAT_UNTIL_STOP_CMD		(11	| AT91C_MCI_TRTYP_STREAM| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRDIR	| AT91C_MCI_TRCMD_START | AT91C_MCI_MAXLAT )
+
+#define AT91C_STOP_TRANSMISSION_CMD				(12	| AT91C_MCI_TRCMD_STOP 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 		| AT91C_MCI_MAXLAT )
+#define AT91C_STOP_TRANSMISSION_SYNC_CMD		(12	| AT91C_MCI_TRCMD_STOP 	| AT91C_MCI_SPCMD_SYNC	| AT91C_MCI_RSPTYP_48 		| AT91C_MCI_MAXLAT )
+#define AT91C_SEND_STATUS_CMD					(13	| AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 		| AT91C_MCI_MAXLAT )
+#define AT91C_GO_INACTIVE_STATE_CMD				(15	| AT91C_MCI_RSPTYP_NO )
+
+//*------------------------------------------------
+//* Class 2 commands: Block oriented Read commands
+//*------------------------------------------------
+
+#define AT91C_SET_BLOCKLEN_CMD					(16 | AT91C_MCI_TRCMD_NO 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48		| AT91C_MCI_MAXLAT )
+#define AT91C_READ_SINGLE_BLOCK_CMD				(17 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 	| AT91C_MCI_TRCMD_START	| AT91C_MCI_TRTYP_BLOCK	| AT91C_MCI_TRDIR	| AT91C_MCI_MAXLAT)
+#define AT91C_READ_MULTIPLE_BLOCK_CMD			(18 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 	| AT91C_MCI_TRCMD_START	| AT91C_MCI_TRTYP_MULTIPLE	| AT91C_MCI_TRDIR	| AT91C_MCI_MAXLAT)
+
+//*--------------------------------------------
+//* Class 3 commands: Sequential write commands
+//*--------------------------------------------
+
+#define AT91C_MMC_WRITE_DAT_UNTIL_STOP_CMD		(20 | AT91C_MCI_TRTYP_STREAM| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48 & ~(AT91C_MCI_TRDIR) | AT91C_MCI_TRCMD_START | AT91C_MCI_MAXLAT )	// MMC
+
+//*------------------------------------------------
+//* Class 4 commands: Block oriented write commands
+//*------------------------------------------------
+	
+#define AT91C_WRITE_BLOCK_CMD					(24 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_START	| (AT91C_MCI_TRTYP_BLOCK 	&  ~(AT91C_MCI_TRDIR))	| AT91C_MCI_MAXLAT)
+#define AT91C_WRITE_MULTIPLE_BLOCK_CMD			(25 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_START	| (AT91C_MCI_TRTYP_MULTIPLE	&  ~(AT91C_MCI_TRDIR)) 	| AT91C_MCI_MAXLAT)
+#define AT91C_PROGRAM_CSD_CMD					(27 | AT91C_MCI_RSPTYP_48 )
+
+
+//*----------------------------------------
+//* Class 6 commands: Group Write protect
+//*----------------------------------------
+
+#define AT91C_SET_WRITE_PROT_CMD				(28	| AT91C_MCI_RSPTYP_48 )
+#define AT91C_CLR_WRITE_PROT_CMD				(29	| AT91C_MCI_RSPTYP_48 )
+#define AT91C_SEND_WRITE_PROT_CMD				(30	| AT91C_MCI_RSPTYP_48 )
+
+
+//*----------------------------------------
+//* Class 5 commands: Erase commands
+//*----------------------------------------
+
+#define AT91C_TAG_SECTOR_START_CMD				(32 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
+#define AT91C_TAG_SECTOR_END_CMD  				(33 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
+#define AT91C_MMC_UNTAG_SECTOR_CMD				(34 | AT91C_MCI_RSPTYP_48 )
+#define AT91C_MMC_TAG_ERASE_GROUP_START_CMD		(35 | AT91C_MCI_RSPTYP_48 )
+#define AT91C_MMC_TAG_ERASE_GROUP_END_CMD		(36 | AT91C_MCI_RSPTYP_48 )
+#define AT91C_MMC_UNTAG_ERASE_GROUP_CMD			(37 | AT91C_MCI_RSPTYP_48 )
+#define AT91C_ERASE_CMD							(38 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT )
+
+//*----------------------------------------
+//* Class 7 commands: Lock commands
+//*----------------------------------------
+
+#define AT91C_LOCK_UNLOCK						(42 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)	// no tested
+
+//*-----------------------------------------------
+// Class 8 commands: Application specific commands
+//*-----------------------------------------------
+
+#define AT91C_APP_CMD							(55 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT)
+#define AT91C_GEN_CMD							(56 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT)	// no tested
+
+#define AT91C_SDCARD_SET_BUS_WIDTH_CMD			(6 	| AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
+#define AT91C_SDCARD_STATUS_CMD					(13 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
+#define AT91C_SDCARD_SEND_NUM_WR_BLOCKS_CMD		(22 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
+#define AT91C_SDCARD_SET_WR_BLK_ERASE_COUNT_CMD	(23 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
+#define AT91C_SDCARD_APP_OP_COND_CMD			(41 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO )
+#define AT91C_SDCARD_SET_CLR_CARD_DETECT_CMD	(42 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
+#define AT91C_SDCARD_SEND_SCR_CMD				(51 | AT91C_MCI_SPCMD_NONE	| AT91C_MCI_RSPTYP_48	| AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
+
+#define AT91C_SDCARD_APP_ALL_CMD				(AT91C_SDCARD_SET_BUS_WIDTH_CMD +\
+												AT91C_SDCARD_STATUS_CMD +\
+												AT91C_SDCARD_SEND_NUM_WR_BLOCKS_CMD +\
+												AT91C_SDCARD_SET_WR_BLK_ERASE_COUNT_CMD +\
+												AT91C_SDCARD_APP_OP_COND_CMD +\
+												AT91C_SDCARD_SET_CLR_CARD_DETECT_CMD +\
+												AT91C_SDCARD_SEND_SCR_CMD)
+
+//*----------------------------------------
+//* Class 9 commands: IO Mode commands
+//*----------------------------------------
+
+#define AT91C_MMC_FAST_IO_CMD					(39 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT)
+#define AT91C_MMC_GO_IRQ_STATE_CMD				(40 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO	| AT91C_MCI_MAXLAT)
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+// Functions returnals
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+#define AT91C_CMD_SEND_OK					0		// Command ok
+#define AT91C_CMD_SEND_ERROR				-1		// Command failed
+#define AT91C_INIT_OK						2		// Init Successfull
+#define AT91C_INIT_ERROR					3		// Init Failed
+#define AT91C_READ_OK						4		// Read Successfull
+#define AT91C_READ_ERROR					5		// Read Failed
+#define AT91C_WRITE_OK						6		// Write Successfull
+#define AT91C_WRITE_ERROR					7		// Write Failed
+#define AT91C_ERASE_OK						8		// Erase Successfull
+#define AT91C_ERASE_ERROR					9		// Erase Failed
+#define AT91C_CARD_SELECTED_OK				10		// Card Selection Successfull
+#define AT91C_CARD_SELECTED_ERROR			11		// Card Selection Failed
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+// MCI_SR Errors
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+#define 	AT91C_MCI_SR_ERROR		(AT91C_MCI_UNRE |\
+									 AT91C_MCI_OVRE |\
+									 AT91C_MCI_DTOE |\
+									 AT91C_MCI_DCRCE |\
+									 AT91C_MCI_RTOE |\
+									 AT91C_MCI_RENDE |\
+									 AT91C_MCI_RCRCE |\
+									 AT91C_MCI_RDIRE |\
+									 AT91C_MCI_RINDE)
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+// OCR Register
+////////////////////////////////////////////////////////////////////////////////////////////////////
+#define AT91C_VDD_16_17					(1 << 4)
+#define AT91C_VDD_17_18					(1 << 5)
+#define AT91C_VDD_18_19					(1 << 6)
+#define AT91C_VDD_19_20					(1 << 7)
+#define AT91C_VDD_20_21					(1 << 8)
+#define AT91C_VDD_21_22					(1 << 9)
+#define AT91C_VDD_22_23					(1 << 10)
+#define AT91C_VDD_23_24					(1 << 11)
+#define AT91C_VDD_24_25					(1 << 12)
+#define AT91C_VDD_25_26					(1 << 13)
+#define AT91C_VDD_26_27					(1 << 14)
+#define AT91C_VDD_27_28					(1 << 15)
+#define AT91C_VDD_28_29					(1 << 16)
+#define AT91C_VDD_29_30					(1 << 17)
+#define AT91C_VDD_30_31					(1 << 18)
+#define AT91C_VDD_31_32					(1 << 19)
+#define AT91C_VDD_32_33					(1 << 20)
+#define AT91C_VDD_33_34					(1 << 21)
+#define AT91C_VDD_34_35					(1 << 22)
+#define AT91C_VDD_35_36					(1 << 23)
+#define AT91C_CARD_POWER_UP_BUSY		(1 << 31)
+
+#define AT91C_MMC_HOST_VOLTAGE_RANGE	(AT91C_VDD_27_28 +\
+										AT91C_VDD_28_29 +\
+										AT91C_VDD_29_30 +\
+										AT91C_VDD_30_31 +\
+										AT91C_VDD_31_32 +\
+										AT91C_VDD_32_33)
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+// CURRENT_STATE & READY_FOR_DATA in SDCard Status Register definition (response type R1)
+////////////////////////////////////////////////////////////////////////////////////////////////////
+#define AT91C_SR_READY_FOR_DATA				(1 << 8)	// corresponds to buffer empty signalling on the bus
+#define AT91C_SR_IDLE						(0 << 9)
+#define AT91C_SR_READY						(1 << 9)
+#define AT91C_SR_IDENT						(2 << 9)
+#define AT91C_SR_STBY						(3 << 9)
+#define AT91C_SR_TRAN						(4 << 9)
+#define AT91C_SR_DATA						(5 << 9)
+#define AT91C_SR_RCV						(6 << 9)
+#define AT91C_SR_PRG						(7 << 9)
+#define AT91C_SR_DIS						(8 << 9)
+
+#define AT91C_SR_CARD_SELECTED				(AT91C_SR_READY_FOR_DATA + AT91C_SR_TRAN)
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+// MMC CSD register header File					
+// AT91C_CSD_xxx_S	for shift value
+// AT91C_CSD_xxx_M	for mask  value
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+
+// First Response INT <=> CSD[3] : bits 0 to 31
+#define	AT91C_CSD_BIT0_S			0		// [0:0]			
+#define	AT91C_CSD_BIT0_M			0x01				
+#define	AT91C_CSD_CRC_S				1		// [7:1]
+#define	AT91C_CSD_CRC_M				0x7F
+#define	AT91C_CSD_MMC_ECC_S			8		// [9:8]		reserved for MMC compatibility
+#define	AT91C_CSD_MMC_ECC_M			0x03
+#define	AT91C_CSD_FILE_FMT_S		10		// [11:10]
+#define	AT91C_CSD_FILE_FMT_M		0x03
+#define	AT91C_CSD_TMP_WP_S			12		// [12:12]
+#define	AT91C_CSD_TMP_WP_M			0x01
+#define	AT91C_CSD_PERM_WP_S 		13		// [13:13]
+#define	AT91C_CSD_PERM_WP_M 		0x01
+#define	AT91C_CSD_COPY_S	 		14		// [14:14]
+#define	AT91C_CSD_COPY_M 			0x01
+#define	AT91C_CSD_FILE_FMT_GRP_S	15		// [15:15]
+#define	AT91C_CSD_FILE_FMT_GRP_M	0x01
+//	reserved						16		// [20:16]
+//	reserved						0x1F
+#define	AT91C_CSD_WBLOCK_P_S 		21		// [21:21]
+#define	AT91C_CSD_WBLOCK_P_M 		0x01
+#define	AT91C_CSD_WBLEN_S 			22		// [25:22]
+#define	AT91C_CSD_WBLEN_M 			0x0F
+#define	AT91C_CSD_R2W_F_S 			26		// [28:26]
+#define	AT91C_CSD_R2W_F_M 			0x07
+#define	AT91C_CSD_MMC_DEF_ECC_S		29		// [30:29]		reserved for MMC compatibility
+#define	AT91C_CSD_MMC_DEF_ECC_M		0x03
+#define	AT91C_CSD_WP_GRP_EN_S		31		// [31:31]
+#define	AT91C_CSD_WP_GRP_EN_M 		0x01
+
+// Seconde Response INT <=> CSD[2] : bits 32 to 63
+#define	AT91C_CSD_v21_WP_GRP_SIZE_S	0		// [38:32]				
+#define	AT91C_CSD_v21_WP_GRP_SIZE_M	0x7F				
+#define	AT91C_CSD_v21_SECT_SIZE_S	7		// [45:39]
+#define	AT91C_CSD_v21_SECT_SIZE_M	0x7F
+#define	AT91C_CSD_v21_ER_BLEN_EN_S	14		// [46:46]
+#define	AT91C_CSD_v21_ER_BLEN_EN_M	0x01
+
+#define	AT91C_CSD_v22_WP_GRP_SIZE_S	0		// [36:32]				
+#define	AT91C_CSD_v22_WP_GRP_SIZE_M	0x1F				
+#define	AT91C_CSD_v22_ER_GRP_SIZE_S	5		// [41:37]
+#define	AT91C_CSD_v22_ER_GRP_SIZE_M	0x1F
+#define	AT91C_CSD_v22_SECT_SIZE_S	10		// [46:42]
+#define	AT91C_CSD_v22_SECT_SIZE_M	0x1F
+
+#define	AT91C_CSD_C_SIZE_M_S		15		// [49:47]
+#define	AT91C_CSD_C_SIZE_M_M		0x07
+#define	AT91C_CSD_VDD_WMAX_S 		18		// [52:50]
+#define	AT91C_CSD_VDD_WMAX_M 		0x07
+#define	AT91C_CSD_VDD_WMIN_S	 	21		// [55:53]
+#define	AT91C_CSD_VDD_WMIN_M 		0x07
+#define	AT91C_CSD_RCUR_MAX_S 		24		// [58:56]
+#define	AT91C_CSD_RCUR_MAX_M 		0x07
+#define	AT91C_CSD_RCUR_MIN_S 		27		// [61:59]
+#define	AT91C_CSD_RCUR_MIN_M 		0x07
+#define	AT91C_CSD_CSIZE_L_S 		30		// [63:62] <=> 2 LSB of CSIZE
+#define	AT91C_CSD_CSIZE_L_M 		0x03
+
+// Third Response INT <=> CSD[1] : bits 64 to 95
+#define	AT91C_CSD_CSIZE_H_S 		0		// [73:64]	<=> 10 MSB of CSIZE
+#define	AT91C_CSD_CSIZE_H_M 		0x03FF
+// reserved							10		// [75:74]
+// reserved							0x03		
+#define	AT91C_CSD_DSR_I_S 			12		// [76:76]
+#define	AT91C_CSD_DSR_I_M 			0x01
+#define	AT91C_CSD_RD_B_MIS_S 		13		// [77:77]
+#define	AT91C_CSD_RD_B_MIS_M 		0x01
+#define	AT91C_CSD_WR_B_MIS_S 		14		// [78:78]
+#define	AT91C_CSD_WR_B_MIS_M 		0x01
+#define	AT91C_CSD_RD_B_PAR_S 		15		// [79:79]
+#define	AT91C_CSD_RD_B_PAR_M 		0x01
+#define	AT91C_CSD_RD_B_LEN_S 		16		// [83:80]
+#define	AT91C_CSD_RD_B_LEN_M 		0x0F
+#define	AT91C_CSD_CCC_S	 			20		// [95:84]
+#define	AT91C_CSD_CCC_M 			0x0FFF
+
+// Fourth Response INT <=> CSD[0] : bits 96 to 127
+#define	AT91C_CSD_TRANS_SPEED_S 	0		// [103:96]
+#define	AT91C_CSD_TRANS_SPEED_M 	0xFF
+#define	AT91C_CSD_NSAC_S 			8		// [111:104]
+#define	AT91C_CSD_NSAC_M 			0xFF
+#define	AT91C_CSD_TAAC_S 			16		// [119:112]
+#define	AT91C_CSD_TAAC_M 			0xFF
+//	reserved						24		// [121:120]
+//	reserved						0x03
+#define	AT91C_CSD_MMC_SPEC_VERS_S	26		// [125:122]	reserved for MMC compatibility
+#define	AT91C_CSD_MMC_SPEC_VERS_M	0x0F
+#define	AT91C_CSD_STRUCT_S			30		// [127:126]
+#define	AT91C_CSD_STRUCT_M 			0x03
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#endif
+
diff --git a/target/linux/at91/image/dfboot/src/include/AT91RM9200.h b/target/linux/at91/image/dfboot/src/include/AT91RM9200.h
new file mode 100644
index 0000000..0cd153b
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/include/AT91RM9200.h
@@ -0,0 +1,2745 @@
+// ----------------------------------------------------------------------------
+//          ATMEL Microcontroller Software Support  -  ROUSSET  -
+// ----------------------------------------------------------------------------
+//  The software is delivered "AS IS" without warranty or condition of any
+//  kind, either express, implied or statutory. This includes without
+//  limitation any warranty or condition with respect to merchantability or
+//  fitness for any particular purpose, or against the infringements of
+//  intellectual property rights of others.
+// ----------------------------------------------------------------------------
+// File Name           : AT91RM9200.h
+// Object              : AT91RM9200 definitions
+// Generated           : AT91 SW Application Group  11/19/2003 (17:20:50)
+// 
+// CVS Reference       : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003//
+// CVS Reference       : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003//
+// CVS Reference       : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002//
+// CVS Reference       : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002//
+// CVS Reference       : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002//
+// CVS Reference       : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002//
+// CVS Reference       : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003//
+// CVS Reference       : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002//
+// CVS Reference       : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003//
+// CVS Reference       : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002//
+// CVS Reference       : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002//
+// CVS Reference       : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002//
+// CVS Reference       : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002//
+// CVS Reference       : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002//
+// CVS Reference       : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003//
+// CVS Reference       : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003//
+// CVS Reference       : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002//
+// CVS Reference       : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002//
+// CVS Reference       : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003//
+// CVS Reference       : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003//
+// CVS Reference       : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002//
+// CVS Reference       : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002//
+// CVS Reference       : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002//
+// ----------------------------------------------------------------------------
+
+#ifndef AT91RM9200_H
+#define AT91RM9200_H
+
+typedef volatile unsigned int AT91_REG;// Hardware register definition
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR System Peripherals
+// *****************************************************************************
+typedef struct _AT91S_SYS {
+	AT91_REG	 AIC_SMR[32]; 	// Source Mode Register
+	AT91_REG	 AIC_SVR[32]; 	// Source Vector Register
+	AT91_REG	 AIC_IVR; 	// IRQ Vector Register
+	AT91_REG	 AIC_FVR; 	// FIQ Vector Register
+	AT91_REG	 AIC_ISR; 	// Interrupt Status Register
+	AT91_REG	 AIC_IPR; 	// Interrupt Pending Register
+	AT91_REG	 AIC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 AIC_CISR; 	// Core Interrupt Status Register
+	AT91_REG	 Reserved0[2]; 	// 
+	AT91_REG	 AIC_IECR; 	// Interrupt Enable Command Register
+	AT91_REG	 AIC_IDCR; 	// Interrupt Disable Command Register
+	AT91_REG	 AIC_ICCR; 	// Interrupt Clear Command Register
+	AT91_REG	 AIC_ISCR; 	// Interrupt Set Command Register
+	AT91_REG	 AIC_EOICR; 	// End of Interrupt Command Register
+	AT91_REG	 AIC_SPU; 	// Spurious Vector Register
+	AT91_REG	 AIC_DCR; 	// Debug Control Register (Protect)
+	AT91_REG	 Reserved1[1]; 	// 
+	AT91_REG	 AIC_FFER; 	// Fast Forcing Enable Register
+	AT91_REG	 AIC_FFDR; 	// Fast Forcing Disable Register
+	AT91_REG	 AIC_FFSR; 	// Fast Forcing Status Register
+	AT91_REG	 Reserved2[45]; 	// 
+	AT91_REG	 DBGU_CR; 	// Control Register
+	AT91_REG	 DBGU_MR; 	// Mode Register
+	AT91_REG	 DBGU_IER; 	// Interrupt Enable Register
+	AT91_REG	 DBGU_IDR; 	// Interrupt Disable Register
+	AT91_REG	 DBGU_IMR; 	// Interrupt Mask Register
+	AT91_REG	 DBGU_CSR; 	// Channel Status Register
+	AT91_REG	 DBGU_RHR; 	// Receiver Holding Register
+	AT91_REG	 DBGU_THR; 	// Transmitter Holding Register
+	AT91_REG	 DBGU_BRGR; 	// Baud Rate Generator Register
+	AT91_REG	 Reserved3[7]; 	// 
+	AT91_REG	 DBGU_C1R; 	// Chip ID1 Register
+	AT91_REG	 DBGU_C2R; 	// Chip ID2 Register
+	AT91_REG	 DBGU_FNTR; 	// Force NTRST Register
+	AT91_REG	 Reserved4[45]; 	// 
+	AT91_REG	 DBGU_RPR; 	// Receive Pointer Register
+	AT91_REG	 DBGU_RCR; 	// Receive Counter Register
+	AT91_REG	 DBGU_TPR; 	// Transmit Pointer Register
+	AT91_REG	 DBGU_TCR; 	// Transmit Counter Register
+	AT91_REG	 DBGU_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 DBGU_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 DBGU_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 DBGU_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 DBGU_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 DBGU_PTSR; 	// PDC Transfer Status Register
+	AT91_REG	 Reserved5[54]; 	// 
+	AT91_REG	 PIOA_PER; 	// PIO Enable Register
+	AT91_REG	 PIOA_PDR; 	// PIO Disable Register
+	AT91_REG	 PIOA_PSR; 	// PIO Status Register
+	AT91_REG	 Reserved6[1]; 	// 
+	AT91_REG	 PIOA_OER; 	// Output Enable Register
+	AT91_REG	 PIOA_ODR; 	// Output Disable Registerr
+	AT91_REG	 PIOA_OSR; 	// Output Status Register
+	AT91_REG	 Reserved7[1]; 	// 
+	AT91_REG	 PIOA_IFER; 	// Input Filter Enable Register
+	AT91_REG	 PIOA_IFDR; 	// Input Filter Disable Register
+	AT91_REG	 PIOA_IFSR; 	// Input Filter Status Register
+	AT91_REG	 Reserved8[1]; 	// 
+	AT91_REG	 PIOA_SODR; 	// Set Output Data Register
+	AT91_REG	 PIOA_CODR; 	// Clear Output Data Register
+	AT91_REG	 PIOA_ODSR; 	// Output Data Status Register
+	AT91_REG	 PIOA_PDSR; 	// Pin Data Status Register
+	AT91_REG	 PIOA_IER; 	// Interrupt Enable Register
+	AT91_REG	 PIOA_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PIOA_IMR; 	// Interrupt Mask Register
+	AT91_REG	 PIOA_ISR; 	// Interrupt Status Register
+	AT91_REG	 PIOA_MDER; 	// Multi-driver Enable Register
+	AT91_REG	 PIOA_MDDR; 	// Multi-driver Disable Register
+	AT91_REG	 PIOA_MDSR; 	// Multi-driver Status Register
+	AT91_REG	 Reserved9[1]; 	// 
+	AT91_REG	 PIOA_PPUDR; 	// Pull-up Disable Register
+	AT91_REG	 PIOA_PPUER; 	// Pull-up Enable Register
+	AT91_REG	 PIOA_PPUSR; 	// Pad Pull-up Status Register
+	AT91_REG	 Reserved10[1]; 	// 
+	AT91_REG	 PIOA_ASR; 	// Select A Register
+	AT91_REG	 PIOA_BSR; 	// Select B Register
+	AT91_REG	 PIOA_ABSR; 	// AB Select Status Register
+	AT91_REG	 Reserved11[9]; 	// 
+	AT91_REG	 PIOA_OWER; 	// Output Write Enable Register
+	AT91_REG	 PIOA_OWDR; 	// Output Write Disable Register
+	AT91_REG	 PIOA_OWSR; 	// Output Write Status Register
+	AT91_REG	 Reserved12[85]; 	// 
+	AT91_REG	 PIOB_PER; 	// PIO Enable Register
+	AT91_REG	 PIOB_PDR; 	// PIO Disable Register
+	AT91_REG	 PIOB_PSR; 	// PIO Status Register
+	AT91_REG	 Reserved13[1]; 	// 
+	AT91_REG	 PIOB_OER; 	// Output Enable Register
+	AT91_REG	 PIOB_ODR; 	// Output Disable Registerr
+	AT91_REG	 PIOB_OSR; 	// Output Status Register
+	AT91_REG	 Reserved14[1]; 	// 
+	AT91_REG	 PIOB_IFER; 	// Input Filter Enable Register
+	AT91_REG	 PIOB_IFDR; 	// Input Filter Disable Register
+	AT91_REG	 PIOB_IFSR; 	// Input Filter Status Register
+	AT91_REG	 Reserved15[1]; 	// 
+	AT91_REG	 PIOB_SODR; 	// Set Output Data Register
+	AT91_REG	 PIOB_CODR; 	// Clear Output Data Register
+	AT91_REG	 PIOB_ODSR; 	// Output Data Status Register
+	AT91_REG	 PIOB_PDSR; 	// Pin Data Status Register
+	AT91_REG	 PIOB_IER; 	// Interrupt Enable Register
+	AT91_REG	 PIOB_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PIOB_IMR; 	// Interrupt Mask Register
+	AT91_REG	 PIOB_ISR; 	// Interrupt Status Register
+	AT91_REG	 PIOB_MDER; 	// Multi-driver Enable Register
+	AT91_REG	 PIOB_MDDR; 	// Multi-driver Disable Register
+	AT91_REG	 PIOB_MDSR; 	// Multi-driver Status Register
+	AT91_REG	 Reserved16[1]; 	// 
+	AT91_REG	 PIOB_PPUDR; 	// Pull-up Disable Register
+	AT91_REG	 PIOB_PPUER; 	// Pull-up Enable Register
+	AT91_REG	 PIOB_PPUSR; 	// Pad Pull-up Status Register
+	AT91_REG	 Reserved17[1]; 	// 
+	AT91_REG	 PIOB_ASR; 	// Select A Register
+	AT91_REG	 PIOB_BSR; 	// Select B Register
+	AT91_REG	 PIOB_ABSR; 	// AB Select Status Register
+	AT91_REG	 Reserved18[9]; 	// 
+	AT91_REG	 PIOB_OWER; 	// Output Write Enable Register
+	AT91_REG	 PIOB_OWDR; 	// Output Write Disable Register
+	AT91_REG	 PIOB_OWSR; 	// Output Write Status Register
+	AT91_REG	 Reserved19[85]; 	// 
+	AT91_REG	 PIOC_PER; 	// PIO Enable Register
+	AT91_REG	 PIOC_PDR; 	// PIO Disable Register
+	AT91_REG	 PIOC_PSR; 	// PIO Status Register
+	AT91_REG	 Reserved20[1]; 	// 
+	AT91_REG	 PIOC_OER; 	// Output Enable Register
+	AT91_REG	 PIOC_ODR; 	// Output Disable Registerr
+	AT91_REG	 PIOC_OSR; 	// Output Status Register
+	AT91_REG	 Reserved21[1]; 	// 
+	AT91_REG	 PIOC_IFER; 	// Input Filter Enable Register
+	AT91_REG	 PIOC_IFDR; 	// Input Filter Disable Register
+	AT91_REG	 PIOC_IFSR; 	// Input Filter Status Register
+	AT91_REG	 Reserved22[1]; 	// 
+	AT91_REG	 PIOC_SODR; 	// Set Output Data Register
+	AT91_REG	 PIOC_CODR; 	// Clear Output Data Register
+	AT91_REG	 PIOC_ODSR; 	// Output Data Status Register
+	AT91_REG	 PIOC_PDSR; 	// Pin Data Status Register
+	AT91_REG	 PIOC_IER; 	// Interrupt Enable Register
+	AT91_REG	 PIOC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PIOC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 PIOC_ISR; 	// Interrupt Status Register
+	AT91_REG	 PIOC_MDER; 	// Multi-driver Enable Register
+	AT91_REG	 PIOC_MDDR; 	// Multi-driver Disable Register
+	AT91_REG	 PIOC_MDSR; 	// Multi-driver Status Register
+	AT91_REG	 Reserved23[1]; 	// 
+	AT91_REG	 PIOC_PPUDR; 	// Pull-up Disable Register
+	AT91_REG	 PIOC_PPUER; 	// Pull-up Enable Register
+	AT91_REG	 PIOC_PPUSR; 	// Pad Pull-up Status Register
+	AT91_REG	 Reserved24[1]; 	// 
+	AT91_REG	 PIOC_ASR; 	// Select A Register
+	AT91_REG	 PIOC_BSR; 	// Select B Register
+	AT91_REG	 PIOC_ABSR; 	// AB Select Status Register
+	AT91_REG	 Reserved25[9]; 	// 
+	AT91_REG	 PIOC_OWER; 	// Output Write Enable Register
+	AT91_REG	 PIOC_OWDR; 	// Output Write Disable Register
+	AT91_REG	 PIOC_OWSR; 	// Output Write Status Register
+	AT91_REG	 Reserved26[85]; 	// 
+	AT91_REG	 PIOD_PER; 	// PIO Enable Register
+	AT91_REG	 PIOD_PDR; 	// PIO Disable Register
+	AT91_REG	 PIOD_PSR; 	// PIO Status Register
+	AT91_REG	 Reserved27[1]; 	// 
+	AT91_REG	 PIOD_OER; 	// Output Enable Register
+	AT91_REG	 PIOD_ODR; 	// Output Disable Registerr
+	AT91_REG	 PIOD_OSR; 	// Output Status Register
+	AT91_REG	 Reserved28[1]; 	// 
+	AT91_REG	 PIOD_IFER; 	// Input Filter Enable Register
+	AT91_REG	 PIOD_IFDR; 	// Input Filter Disable Register
+	AT91_REG	 PIOD_IFSR; 	// Input Filter Status Register
+	AT91_REG	 Reserved29[1]; 	// 
+	AT91_REG	 PIOD_SODR; 	// Set Output Data Register
+	AT91_REG	 PIOD_CODR; 	// Clear Output Data Register
+	AT91_REG	 PIOD_ODSR; 	// Output Data Status Register
+	AT91_REG	 PIOD_PDSR; 	// Pin Data Status Register
+	AT91_REG	 PIOD_IER; 	// Interrupt Enable Register
+	AT91_REG	 PIOD_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PIOD_IMR; 	// Interrupt Mask Register
+	AT91_REG	 PIOD_ISR; 	// Interrupt Status Register
+	AT91_REG	 PIOD_MDER; 	// Multi-driver Enable Register
+	AT91_REG	 PIOD_MDDR; 	// Multi-driver Disable Register
+	AT91_REG	 PIOD_MDSR; 	// Multi-driver Status Register
+	AT91_REG	 Reserved30[1]; 	// 
+	AT91_REG	 PIOD_PPUDR; 	// Pull-up Disable Register
+	AT91_REG	 PIOD_PPUER; 	// Pull-up Enable Register
+	AT91_REG	 PIOD_PPUSR; 	// Pad Pull-up Status Register
+	AT91_REG	 Reserved31[1]; 	// 
+	AT91_REG	 PIOD_ASR; 	// Select A Register
+	AT91_REG	 PIOD_BSR; 	// Select B Register
+	AT91_REG	 PIOD_ABSR; 	// AB Select Status Register
+	AT91_REG	 Reserved32[9]; 	// 
+	AT91_REG	 PIOD_OWER; 	// Output Write Enable Register
+	AT91_REG	 PIOD_OWDR; 	// Output Write Disable Register
+	AT91_REG	 PIOD_OWSR; 	// Output Write Status Register
+	AT91_REG	 Reserved33[85]; 	// 
+	AT91_REG	 PMC_SCER; 	// System Clock Enable Register
+	AT91_REG	 PMC_SCDR; 	// System Clock Disable Register
+	AT91_REG	 PMC_SCSR; 	// System Clock Status Register
+	AT91_REG	 Reserved34[1]; 	// 
+	AT91_REG	 PMC_PCER; 	// Peripheral Clock Enable Register
+	AT91_REG	 PMC_PCDR; 	// Peripheral Clock Disable Register
+	AT91_REG	 PMC_PCSR; 	// Peripheral Clock Status Register
+	AT91_REG	 Reserved35[1]; 	// 
+	AT91_REG	 CKGR_MOR; 	// Main Oscillator Register
+	AT91_REG	 CKGR_MCFR; 	// Main Clock  Frequency Register
+	AT91_REG	 CKGR_PLLAR; 	// PLL A Register
+	AT91_REG	 CKGR_PLLBR; 	// PLL B Register
+	AT91_REG	 PMC_MCKR; 	// Master Clock Register
+	AT91_REG	 Reserved36[3]; 	// 
+	AT91_REG	 PMC_PCKR[8]; 	// Programmable Clock Register
+	AT91_REG	 PMC_IER; 	// Interrupt Enable Register
+	AT91_REG	 PMC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PMC_SR; 	// Status Register
+	AT91_REG	 PMC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 Reserved37[36]; 	// 
+	AT91_REG	 ST_CR; 	// Control Register
+	AT91_REG	 ST_PIMR; 	// Period Interval Mode Register
+	AT91_REG	 ST_WDMR; 	// Watchdog Mode Register
+	AT91_REG	 ST_RTMR; 	// Real-time Mode Register
+	AT91_REG	 ST_SR; 	// Status Register
+	AT91_REG	 ST_IER; 	// Interrupt Enable Register
+	AT91_REG	 ST_IDR; 	// Interrupt Disable Register
+	AT91_REG	 ST_IMR; 	// Interrupt Mask Register
+	AT91_REG	 ST_RTAR; 	// Real-time Alarm Register
+	AT91_REG	 ST_CRTR; 	// Current Real-time Register
+	AT91_REG	 Reserved38[54]; 	// 
+	AT91_REG	 RTC_CR; 	// Control Register
+	AT91_REG	 RTC_MR; 	// Mode Register
+	AT91_REG	 RTC_TIMR; 	// Time Register
+	AT91_REG	 RTC_CALR; 	// Calendar Register
+	AT91_REG	 RTC_TIMALR; 	// Time Alarm Register
+	AT91_REG	 RTC_CALALR; 	// Calendar Alarm Register
+	AT91_REG	 RTC_SR; 	// Status Register
+	AT91_REG	 RTC_SCCR; 	// Status Clear Command Register
+	AT91_REG	 RTC_IER; 	// Interrupt Enable Register
+	AT91_REG	 RTC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 RTC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 RTC_VER; 	// Valid Entry Register
+	AT91_REG	 Reserved39[52]; 	// 
+	AT91_REG	 MC_RCR; 	// MC Remap Control Register
+	AT91_REG	 MC_ASR; 	// MC Abort Status Register
+	AT91_REG	 MC_AASR; 	// MC Abort Address Status Register
+	AT91_REG	 Reserved40[1]; 	// 
+	AT91_REG	 MC_PUIA[16]; 	// MC Protection Unit Area
+	AT91_REG	 MC_PUP; 	// MC Protection Unit Peripherals
+	AT91_REG	 MC_PUER; 	// MC Protection Unit Enable Register
+	AT91_REG	 Reserved41[2]; 	// 
+	AT91_REG	 EBI_CSA; 	// Chip Select Assignment Register
+	AT91_REG	 EBI_CFGR; 	// Configuration Register
+	AT91_REG	 Reserved42[2]; 	// 
+	AT91_REG	 EBI_SMC2_CSR[8]; 	// SMC2 Chip Select Register
+	AT91_REG	 EBI_SDRC_MR; 	// SDRAM Controller Mode Register
+	AT91_REG	 EBI_SDRC_TR; 	// SDRAM Controller Refresh Timer Register
+	AT91_REG	 EBI_SDRC_CR; 	// SDRAM Controller Configuration Register
+	AT91_REG	 EBI_SDRC_SRR; 	// SDRAM Controller Self Refresh Register
+	AT91_REG	 EBI_SDRC_LPR; 	// SDRAM Controller Low Power Register
+	AT91_REG	 EBI_SDRC_IER; 	// SDRAM Controller Interrupt Enable Register
+	AT91_REG	 EBI_SDRC_IDR; 	// SDRAM Controller Interrupt Disable Register
+	AT91_REG	 EBI_SDRC_IMR; 	// SDRAM Controller Interrupt Mask Register
+	AT91_REG	 EBI_SDRC_ISR; 	// SDRAM Controller Interrupt Mask Register
+	AT91_REG	 Reserved43[3]; 	// 
+	AT91_REG	 EBI_BFC_MR; 	// BFC Mode Register
+} AT91S_SYS, *AT91PS_SYS;
+
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Memory Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_MC {
+	AT91_REG	 MC_RCR; 	// MC Remap Control Register
+	AT91_REG	 MC_ASR; 	// MC Abort Status Register
+	AT91_REG	 MC_AASR; 	// MC Abort Address Status Register
+	AT91_REG	 Reserved0[1]; 	// 
+	AT91_REG	 MC_PUIA[16]; 	// MC Protection Unit Area
+	AT91_REG	 MC_PUP; 	// MC Protection Unit Peripherals
+	AT91_REG	 MC_PUER; 	// MC Protection Unit Enable Register
+} AT91S_MC, *AT91PS_MC;
+
+// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- 
+#define AT91C_MC_RCB          ((unsigned int) 0x1 <<  0) // (MC) Remap Command Bit
+// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- 
+#define AT91C_MC_UNDADD       ((unsigned int) 0x1 <<  0) // (MC) Undefined Addess Abort Status
+#define AT91C_MC_MISADD       ((unsigned int) 0x1 <<  1) // (MC) Misaligned Addess Abort Status
+#define AT91C_MC_MPU          ((unsigned int) 0x1 <<  2) // (MC) Memory protection Unit Abort Status
+#define AT91C_MC_ABTSZ        ((unsigned int) 0x3 <<  8) // (MC) Abort Size Status
+#define 	AT91C_MC_ABTSZ_BYTE                 ((unsigned int) 0x0 <<  8) // (MC) Byte
+#define 	AT91C_MC_ABTSZ_HWORD                ((unsigned int) 0x1 <<  8) // (MC) Half-word
+#define 	AT91C_MC_ABTSZ_WORD                 ((unsigned int) 0x2 <<  8) // (MC) Word
+#define AT91C_MC_ABTTYP       ((unsigned int) 0x3 << 10) // (MC) Abort Type Status
+#define 	AT91C_MC_ABTTYP_DATAR                ((unsigned int) 0x0 << 10) // (MC) Data Read
+#define 	AT91C_MC_ABTTYP_DATAW                ((unsigned int) 0x1 << 10) // (MC) Data Write
+#define 	AT91C_MC_ABTTYP_FETCH                ((unsigned int) 0x2 << 10) // (MC) Code Fetch
+#define AT91C_MC_MST0         ((unsigned int) 0x1 << 16) // (MC) Master 0 Abort Source
+#define AT91C_MC_MST1         ((unsigned int) 0x1 << 17) // (MC) Master 1 Abort Source
+#define AT91C_MC_SVMST0       ((unsigned int) 0x1 << 24) // (MC) Saved Master 0 Abort Source
+#define AT91C_MC_SVMST1       ((unsigned int) 0x1 << 25) // (MC) Saved Master 1 Abort Source
+// -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- 
+#define AT91C_MC_PROT         ((unsigned int) 0x3 <<  0) // (MC) Protection
+#define 	AT91C_MC_PROT_PNAUNA               ((unsigned int) 0x0) // (MC) Privilege: No Access, User: No Access
+#define 	AT91C_MC_PROT_PRWUNA               ((unsigned int) 0x1) // (MC) Privilege: Read/Write, User: No Access
+#define 	AT91C_MC_PROT_PRWURO               ((unsigned int) 0x2) // (MC) Privilege: Read/Write, User: Read Only
+#define 	AT91C_MC_PROT_PRWURW               ((unsigned int) 0x3) // (MC) Privilege: Read/Write, User: Read/Write
+#define AT91C_MC_SIZE         ((unsigned int) 0xF <<  4) // (MC) Internal Area Size
+#define 	AT91C_MC_SIZE_1KB                  ((unsigned int) 0x0 <<  4) // (MC) Area size 1KByte
+#define 	AT91C_MC_SIZE_2KB                  ((unsigned int) 0x1 <<  4) // (MC) Area size 2KByte
+#define 	AT91C_MC_SIZE_4KB                  ((unsigned int) 0x2 <<  4) // (MC) Area size 4KByte
+#define 	AT91C_MC_SIZE_8KB                  ((unsigned int) 0x3 <<  4) // (MC) Area size 8KByte
+#define 	AT91C_MC_SIZE_16KB                 ((unsigned int) 0x4 <<  4) // (MC) Area size 16KByte
+#define 	AT91C_MC_SIZE_32KB                 ((unsigned int) 0x5 <<  4) // (MC) Area size 32KByte
+#define 	AT91C_MC_SIZE_64KB                 ((unsigned int) 0x6 <<  4) // (MC) Area size 64KByte
+#define 	AT91C_MC_SIZE_128KB                ((unsigned int) 0x7 <<  4) // (MC) Area size 128KByte
+#define 	AT91C_MC_SIZE_256KB                ((unsigned int) 0x8 <<  4) // (MC) Area size 256KByte
+#define 	AT91C_MC_SIZE_512KB                ((unsigned int) 0x9 <<  4) // (MC) Area size 512KByte
+#define 	AT91C_MC_SIZE_1MB                  ((unsigned int) 0xA <<  4) // (MC) Area size 1MByte
+#define 	AT91C_MC_SIZE_2MB                  ((unsigned int) 0xB <<  4) // (MC) Area size 2MByte
+#define 	AT91C_MC_SIZE_4MB                  ((unsigned int) 0xC <<  4) // (MC) Area size 4MByte
+#define 	AT91C_MC_SIZE_8MB                  ((unsigned int) 0xD <<  4) // (MC) Area size 8MByte
+#define 	AT91C_MC_SIZE_16MB                 ((unsigned int) 0xE <<  4) // (MC) Area size 16MByte
+#define 	AT91C_MC_SIZE_64MB                 ((unsigned int) 0xF <<  4) // (MC) Area size 64MByte
+#define AT91C_MC_BA           ((unsigned int) 0x3FFFF << 10) // (MC) Internal Area Base Address
+// -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- 
+// -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- 
+#define AT91C_MC_PUEB         ((unsigned int) 0x1 <<  0) // (MC) Protection Unit enable Bit
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Real-time Clock Alarm and Parallel Load Interface
+// *****************************************************************************
+typedef struct _AT91S_RTC {
+	AT91_REG	 RTC_CR; 	// Control Register
+	AT91_REG	 RTC_MR; 	// Mode Register
+	AT91_REG	 RTC_TIMR; 	// Time Register
+	AT91_REG	 RTC_CALR; 	// Calendar Register
+	AT91_REG	 RTC_TIMALR; 	// Time Alarm Register
+	AT91_REG	 RTC_CALALR; 	// Calendar Alarm Register
+	AT91_REG	 RTC_SR; 	// Status Register
+	AT91_REG	 RTC_SCCR; 	// Status Clear Command Register
+	AT91_REG	 RTC_IER; 	// Interrupt Enable Register
+	AT91_REG	 RTC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 RTC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 RTC_VER; 	// Valid Entry Register
+} AT91S_RTC, *AT91PS_RTC;
+
+// -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- 
+#define AT91C_RTC_UPDTIM      ((unsigned int) 0x1 <<  0) // (RTC) Update Request Time Register
+#define AT91C_RTC_UPDCAL      ((unsigned int) 0x1 <<  1) // (RTC) Update Request Calendar Register
+#define AT91C_RTC_TIMEVSEL    ((unsigned int) 0x3 <<  8) // (RTC) Time Event Selection
+#define 	AT91C_RTC_TIMEVSEL_MINUTE               ((unsigned int) 0x0 <<  8) // (RTC) Minute change.
+#define 	AT91C_RTC_TIMEVSEL_HOUR                 ((unsigned int) 0x1 <<  8) // (RTC) Hour change.
+#define 	AT91C_RTC_TIMEVSEL_DAY24                ((unsigned int) 0x2 <<  8) // (RTC) Every day at midnight.
+#define 	AT91C_RTC_TIMEVSEL_DAY12                ((unsigned int) 0x3 <<  8) // (RTC) Every day at noon.
+#define AT91C_RTC_CALEVSEL    ((unsigned int) 0x3 << 16) // (RTC) Calendar Event Selection
+#define 	AT91C_RTC_CALEVSEL_WEEK                 ((unsigned int) 0x0 << 16) // (RTC) Week change (every Monday at time 00:00:00).
+#define 	AT91C_RTC_CALEVSEL_MONTH                ((unsigned int) 0x1 << 16) // (RTC) Month change (every 01 of each month at time 00:00:00).
+#define 	AT91C_RTC_CALEVSEL_YEAR                 ((unsigned int) 0x2 << 16) // (RTC) Year change (every January 1 at time 00:00:00).
+// -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- 
+#define AT91C_RTC_HRMOD       ((unsigned int) 0x1 <<  0) // (RTC) 12-24 hour Mode
+// -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- 
+#define AT91C_RTC_SEC         ((unsigned int) 0x7F <<  0) // (RTC) Current Second
+#define AT91C_RTC_MIN         ((unsigned int) 0x7F <<  8) // (RTC) Current Minute
+#define AT91C_RTC_HOUR        ((unsigned int) 0x1F << 16) // (RTC) Current Hour
+#define AT91C_RTC_AMPM        ((unsigned int) 0x1 << 22) // (RTC) Ante Meridiem, Post Meridiem Indicator
+// -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- 
+#define AT91C_RTC_CENT        ((unsigned int) 0x3F <<  0) // (RTC) Current Century
+#define AT91C_RTC_YEAR        ((unsigned int) 0xFF <<  8) // (RTC) Current Year
+#define AT91C_RTC_MONTH       ((unsigned int) 0x1F << 16) // (RTC) Current Month
+#define AT91C_RTC_DAY         ((unsigned int) 0x7 << 21) // (RTC) Current Day
+#define AT91C_RTC_DATE        ((unsigned int) 0x3F << 24) // (RTC) Current Date
+// -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- 
+#define AT91C_RTC_SECEN       ((unsigned int) 0x1 <<  7) // (RTC) Second Alarm Enable
+#define AT91C_RTC_MINEN       ((unsigned int) 0x1 << 15) // (RTC) Minute Alarm
+#define AT91C_RTC_HOUREN      ((unsigned int) 0x1 << 23) // (RTC) Current Hour
+// -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- 
+#define AT91C_RTC_MONTHEN     ((unsigned int) 0x1 << 23) // (RTC) Month Alarm Enable
+#define AT91C_RTC_DATEEN      ((unsigned int) 0x1 << 31) // (RTC) Date Alarm Enable
+// -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- 
+#define AT91C_RTC_ACKUPD      ((unsigned int) 0x1 <<  0) // (RTC) Acknowledge for Update
+#define AT91C_RTC_ALARM       ((unsigned int) 0x1 <<  1) // (RTC) Alarm Flag
+#define AT91C_RTC_SECEV       ((unsigned int) 0x1 <<  2) // (RTC) Second Event
+#define AT91C_RTC_TIMEV       ((unsigned int) 0x1 <<  3) // (RTC) Time Event
+#define AT91C_RTC_CALEV       ((unsigned int) 0x1 <<  4) // (RTC) Calendar event
+// -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- 
+// -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- 
+// -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- 
+// -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- 
+// -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- 
+#define AT91C_RTC_NVTIM       ((unsigned int) 0x1 <<  0) // (RTC) Non valid Time
+#define AT91C_RTC_NVCAL       ((unsigned int) 0x1 <<  1) // (RTC) Non valid Calendar
+#define AT91C_RTC_NVTIMALR    ((unsigned int) 0x1 <<  2) // (RTC) Non valid time Alarm
+#define AT91C_RTC_NVCALALR    ((unsigned int) 0x1 <<  3) // (RTC) Nonvalid Calendar Alarm
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR System Timer Interface
+// *****************************************************************************
+typedef struct _AT91S_ST {
+	AT91_REG	 ST_CR; 	// Control Register
+	AT91_REG	 ST_PIMR; 	// Period Interval Mode Register
+	AT91_REG	 ST_WDMR; 	// Watchdog Mode Register
+	AT91_REG	 ST_RTMR; 	// Real-time Mode Register
+	AT91_REG	 ST_SR; 	// Status Register
+	AT91_REG	 ST_IER; 	// Interrupt Enable Register
+	AT91_REG	 ST_IDR; 	// Interrupt Disable Register
+	AT91_REG	 ST_IMR; 	// Interrupt Mask Register
+	AT91_REG	 ST_RTAR; 	// Real-time Alarm Register
+	AT91_REG	 ST_CRTR; 	// Current Real-time Register
+} AT91S_ST, *AT91PS_ST;
+
+// -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- 
+#define AT91C_ST_WDRST        ((unsigned int) 0x1 <<  0) // (ST) Watchdog Timer Restart
+// -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- 
+#define AT91C_ST_PIV          ((unsigned int) 0xFFFF <<  0) // (ST) Watchdog Timer Restart
+// -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- 
+#define AT91C_ST_WDV          ((unsigned int) 0xFFFF <<  0) // (ST) Watchdog Timer Restart
+#define AT91C_ST_RSTEN        ((unsigned int) 0x1 << 16) // (ST) Reset Enable
+#define AT91C_ST_EXTEN        ((unsigned int) 0x1 << 17) // (ST) External Signal Assertion Enable
+// -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- 
+#define AT91C_ST_RTPRES       ((unsigned int) 0xFFFF <<  0) // (ST) Real-time Timer Prescaler Value
+// -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- 
+#define AT91C_ST_PITS         ((unsigned int) 0x1 <<  0) // (ST) Period Interval Timer Interrupt
+#define AT91C_ST_WDOVF        ((unsigned int) 0x1 <<  1) // (ST) Watchdog Overflow
+#define AT91C_ST_RTTINC       ((unsigned int) 0x1 <<  2) // (ST) Real-time Timer Increment
+#define AT91C_ST_ALMS         ((unsigned int) 0x1 <<  3) // (ST) Alarm Status
+// -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- 
+// -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- 
+// -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- 
+// -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- 
+#define AT91C_ST_ALMV         ((unsigned int) 0xFFFFF <<  0) // (ST) Alarm Value Value
+// -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- 
+#define AT91C_ST_CRTV         ((unsigned int) 0xFFFFF <<  0) // (ST) Current Real-time Value
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Power Management Controler
+// *****************************************************************************
+typedef struct _AT91S_PMC {
+	AT91_REG	 PMC_SCER; 	// System Clock Enable Register
+	AT91_REG	 PMC_SCDR; 	// System Clock Disable Register
+	AT91_REG	 PMC_SCSR; 	// System Clock Status Register
+	AT91_REG	 Reserved0[1]; 	// 
+	AT91_REG	 PMC_PCER; 	// Peripheral Clock Enable Register
+	AT91_REG	 PMC_PCDR; 	// Peripheral Clock Disable Register
+	AT91_REG	 PMC_PCSR; 	// Peripheral Clock Status Register
+	AT91_REG	 Reserved1[5]; 	// 
+	AT91_REG	 PMC_MCKR; 	// Master Clock Register
+	AT91_REG	 Reserved2[3]; 	// 
+	AT91_REG	 PMC_PCKR[8]; 	// Programmable Clock Register
+	AT91_REG	 PMC_IER; 	// Interrupt Enable Register
+	AT91_REG	 PMC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PMC_SR; 	// Status Register
+	AT91_REG	 PMC_IMR; 	// Interrupt Mask Register
+} AT91S_PMC, *AT91PS_PMC;
+
+// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- 
+#define AT91C_PMC_PCK         ((unsigned int) 0x1 <<  0) // (PMC) Processor Clock
+#define AT91C_PMC_UDP         ((unsigned int) 0x1 <<  1) // (PMC) USB Device Port Clock
+#define AT91C_PMC_MCKUDP      ((unsigned int) 0x1 <<  2) // (PMC) USB Device Port Master Clock Automatic Disable on Suspend
+#define AT91C_PMC_UHP         ((unsigned int) 0x1 <<  4) // (PMC) USB Host Port Clock
+#define AT91C_PMC_PCK0        ((unsigned int) 0x1 <<  8) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK1        ((unsigned int) 0x1 <<  9) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK2        ((unsigned int) 0x1 << 10) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK3        ((unsigned int) 0x1 << 11) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK4        ((unsigned int) 0x1 << 12) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK5        ((unsigned int) 0x1 << 13) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK6        ((unsigned int) 0x1 << 14) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK7        ((unsigned int) 0x1 << 15) // (PMC) Programmable Clock Output
+// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- 
+// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- 
+// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- 
+#define AT91C_PMC_CSS         ((unsigned int) 0x3 <<  0) // (PMC) Programmable Clock Selection
+#define 	AT91C_PMC_CSS_SLOW_CLK             ((unsigned int) 0x0) // (PMC) Slow Clock is selected
+#define 	AT91C_PMC_CSS_MAIN_CLK             ((unsigned int) 0x1) // (PMC) Main Clock is selected
+#define 	AT91C_PMC_CSS_PLLA_CLK             ((unsigned int) 0x2) // (PMC) Clock from PLL A is selected
+#define 	AT91C_PMC_CSS_PLLB_CLK             ((unsigned int) 0x3) // (PMC) Clock from PLL B is selected
+#define AT91C_PMC_PRES        ((unsigned int) 0x7 <<  2) // (PMC) Programmable Clock Prescaler
+#define 	AT91C_PMC_PRES_CLK                  ((unsigned int) 0x0 <<  2) // (PMC) Selected clock
+#define 	AT91C_PMC_PRES_CLK_2                ((unsigned int) 0x1 <<  2) // (PMC) Selected clock divided by 2
+#define 	AT91C_PMC_PRES_CLK_4                ((unsigned int) 0x2 <<  2) // (PMC) Selected clock divided by 4
+#define 	AT91C_PMC_PRES_CLK_8                ((unsigned int) 0x3 <<  2) // (PMC) Selected clock divided by 8
+#define 	AT91C_PMC_PRES_CLK_16               ((unsigned int) 0x4 <<  2) // (PMC) Selected clock divided by 16
+#define 	AT91C_PMC_PRES_CLK_32               ((unsigned int) 0x5 <<  2) // (PMC) Selected clock divided by 32
+#define 	AT91C_PMC_PRES_CLK_64               ((unsigned int) 0x6 <<  2) // (PMC) Selected clock divided by 64
+#define AT91C_PMC_MDIV        ((unsigned int) 0x3 <<  8) // (PMC) Master Clock Division
+#define 	AT91C_PMC_MDIV_1                    ((unsigned int) 0x0 <<  8) // (PMC) The master clock and the processor clock are the same
+#define 	AT91C_PMC_MDIV_2                    ((unsigned int) 0x1 <<  8) // (PMC) The processor clock is twice as fast as the master clock
+#define 	AT91C_PMC_MDIV_3                    ((unsigned int) 0x2 <<  8) // (PMC) The processor clock is three times faster than the master clock
+#define 	AT91C_PMC_MDIV_4                    ((unsigned int) 0x3 <<  8) // (PMC) The processor clock is four times faster than the master clock
+// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- 
+// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- 
+#define AT91C_PMC_MOSCS       ((unsigned int) 0x1 <<  0) // (PMC) MOSC Status/Enable/Disable/Mask
+#define AT91C_PMC_LOCKA       ((unsigned int) 0x1 <<  1) // (PMC) PLL A Status/Enable/Disable/Mask
+#define AT91C_PMC_LOCKB       ((unsigned int) 0x1 <<  2) // (PMC) PLL B Status/Enable/Disable/Mask
+#define AT91C_PMC_MCKRDY      ((unsigned int) 0x1 <<  3) // (PMC) MCK_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK0RDY     ((unsigned int) 0x1 <<  8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK1RDY     ((unsigned int) 0x1 <<  9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK2RDY     ((unsigned int) 0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK3RDY     ((unsigned int) 0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK4RDY     ((unsigned int) 0x1 << 12) // (PMC) PCK4_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK5RDY     ((unsigned int) 0x1 << 13) // (PMC) PCK5_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK6RDY     ((unsigned int) 0x1 << 14) // (PMC) PCK6_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK7RDY     ((unsigned int) 0x1 << 15) // (PMC) PCK7_RDY Status/Enable/Disable/Mask
+// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- 
+// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- 
+// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Clock Generator Controler
+// *****************************************************************************
+typedef struct _AT91S_CKGR {
+	AT91_REG	 CKGR_MOR; 	// Main Oscillator Register
+	AT91_REG	 CKGR_MCFR; 	// Main Clock  Frequency Register
+	AT91_REG	 CKGR_PLLAR; 	// PLL A Register
+	AT91_REG	 CKGR_PLLBR; 	// PLL B Register
+} AT91S_CKGR, *AT91PS_CKGR;
+
+// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- 
+#define AT91C_CKGR_MOSCEN     ((unsigned int) 0x1 <<  0) // (CKGR) Main Oscillator Enable
+#define AT91C_CKGR_OSCTEST    ((unsigned int) 0x1 <<  1) // (CKGR) Oscillator Test
+#define AT91C_CKGR_OSCOUNT    ((unsigned int) 0xFF <<  8) // (CKGR) Main Oscillator Start-up Time
+// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- 
+#define AT91C_CKGR_MAINF      ((unsigned int) 0xFFFF <<  0) // (CKGR) Main Clock Frequency
+#define AT91C_CKGR_MAINRDY    ((unsigned int) 0x1 << 16) // (CKGR) Main Clock Ready
+// -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- 
+#define AT91C_CKGR_DIVA       ((unsigned int) 0xFF <<  0) // (CKGR) Divider Selected
+#define 	AT91C_CKGR_DIVA_0                    ((unsigned int) 0x0) // (CKGR) Divider output is 0
+#define 	AT91C_CKGR_DIVA_BYPASS               ((unsigned int) 0x1) // (CKGR) Divider is bypassed
+#define AT91C_CKGR_PLLACOUNT  ((unsigned int) 0x3F <<  8) // (CKGR) PLL A Counter
+#define AT91C_CKGR_OUTA       ((unsigned int) 0x3 << 14) // (CKGR) PLL A Output Frequency Range
+#define 	AT91C_CKGR_OUTA_0                    ((unsigned int) 0x0 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define 	AT91C_CKGR_OUTA_1                    ((unsigned int) 0x1 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define 	AT91C_CKGR_OUTA_2                    ((unsigned int) 0x2 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define 	AT91C_CKGR_OUTA_3                    ((unsigned int) 0x3 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define AT91C_CKGR_MULA       ((unsigned int) 0x7FF << 16) // (CKGR) PLL A Multiplier
+#define AT91C_CKGR_SRCA       ((unsigned int) 0x1 << 29) // (CKGR) PLL A Source
+// -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- 
+#define AT91C_CKGR_DIVB       ((unsigned int) 0xFF <<  0) // (CKGR) Divider Selected
+#define 	AT91C_CKGR_DIVB_0                    ((unsigned int) 0x0) // (CKGR) Divider output is 0
+#define 	AT91C_CKGR_DIVB_BYPASS               ((unsigned int) 0x1) // (CKGR) Divider is bypassed
+#define AT91C_CKGR_PLLBCOUNT  ((unsigned int) 0x3F <<  8) // (CKGR) PLL B Counter
+#define AT91C_CKGR_OUTB       ((unsigned int) 0x3 << 14) // (CKGR) PLL B Output Frequency Range
+#define 	AT91C_CKGR_OUTB_0                    ((unsigned int) 0x0 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define 	AT91C_CKGR_OUTB_1                    ((unsigned int) 0x1 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define 	AT91C_CKGR_OUTB_2                    ((unsigned int) 0x2 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define 	AT91C_CKGR_OUTB_3                    ((unsigned int) 0x3 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define AT91C_CKGR_MULB       ((unsigned int) 0x7FF << 16) // (CKGR) PLL B Multiplier
+#define AT91C_CKGR_USB_96M    ((unsigned int) 0x1 << 28) // (CKGR) Divider for USB Ports
+#define AT91C_CKGR_USB_PLL    ((unsigned int) 0x1 << 29) // (CKGR) PLL Use
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Parallel Input Output Controler
+// *****************************************************************************
+typedef struct _AT91S_PIO {
+	AT91_REG	 PIO_PER; 	// PIO Enable Register
+	AT91_REG	 PIO_PDR; 	// PIO Disable Register
+	AT91_REG	 PIO_PSR; 	// PIO Status Register
+	AT91_REG	 Reserved0[1]; 	// 
+	AT91_REG	 PIO_OER; 	// Output Enable Register
+	AT91_REG	 PIO_ODR; 	// Output Disable Registerr
+	AT91_REG	 PIO_OSR; 	// Output Status Register
+	AT91_REG	 Reserved1[1]; 	// 
+	AT91_REG	 PIO_IFER; 	// Input Filter Enable Register
+	AT91_REG	 PIO_IFDR; 	// Input Filter Disable Register
+	AT91_REG	 PIO_IFSR; 	// Input Filter Status Register
+	AT91_REG	 Reserved2[1]; 	// 
+	AT91_REG	 PIO_SODR; 	// Set Output Data Register
+	AT91_REG	 PIO_CODR; 	// Clear Output Data Register
+	AT91_REG	 PIO_ODSR; 	// Output Data Status Register
+	AT91_REG	 PIO_PDSR; 	// Pin Data Status Register
+	AT91_REG	 PIO_IER; 	// Interrupt Enable Register
+	AT91_REG	 PIO_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PIO_IMR; 	// Interrupt Mask Register
+	AT91_REG	 PIO_ISR; 	// Interrupt Status Register
+	AT91_REG	 PIO_MDER; 	// Multi-driver Enable Register
+	AT91_REG	 PIO_MDDR; 	// Multi-driver Disable Register
+	AT91_REG	 PIO_MDSR; 	// Multi-driver Status Register
+	AT91_REG	 Reserved3[1]; 	// 
+	AT91_REG	 PIO_PPUDR; 	// Pull-up Disable Register
+	AT91_REG	 PIO_PPUER; 	// Pull-up Enable Register
+	AT91_REG	 PIO_PPUSR; 	// Pad Pull-up Status Register
+	AT91_REG	 Reserved4[1]; 	// 
+	AT91_REG	 PIO_ASR; 	// Select A Register
+	AT91_REG	 PIO_BSR; 	// Select B Register
+	AT91_REG	 PIO_ABSR; 	// AB Select Status Register
+	AT91_REG	 Reserved5[9]; 	// 
+	AT91_REG	 PIO_OWER; 	// Output Write Enable Register
+	AT91_REG	 PIO_OWDR; 	// Output Write Disable Register
+	AT91_REG	 PIO_OWSR; 	// Output Write Status Register
+} AT91S_PIO, *AT91PS_PIO;
+
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Debug Unit
+// *****************************************************************************
+typedef struct _AT91S_DBGU {
+	AT91_REG	 DBGU_CR; 	// Control Register
+	AT91_REG	 DBGU_MR; 	// Mode Register
+	AT91_REG	 DBGU_IER; 	// Interrupt Enable Register
+	AT91_REG	 DBGU_IDR; 	// Interrupt Disable Register
+	AT91_REG	 DBGU_IMR; 	// Interrupt Mask Register
+	AT91_REG	 DBGU_CSR; 	// Channel Status Register
+	AT91_REG	 DBGU_RHR; 	// Receiver Holding Register
+	AT91_REG	 DBGU_THR; 	// Transmitter Holding Register
+	AT91_REG	 DBGU_BRGR; 	// Baud Rate Generator Register
+	AT91_REG	 Reserved0[7]; 	// 
+	AT91_REG	 DBGU_C1R; 	// Chip ID1 Register
+	AT91_REG	 DBGU_C2R; 	// Chip ID2 Register
+	AT91_REG	 DBGU_FNTR; 	// Force NTRST Register
+	AT91_REG	 Reserved1[45]; 	// 
+	AT91_REG	 DBGU_RPR; 	// Receive Pointer Register
+	AT91_REG	 DBGU_RCR; 	// Receive Counter Register
+	AT91_REG	 DBGU_TPR; 	// Transmit Pointer Register
+	AT91_REG	 DBGU_TCR; 	// Transmit Counter Register
+	AT91_REG	 DBGU_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 DBGU_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 DBGU_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 DBGU_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 DBGU_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 DBGU_PTSR; 	// PDC Transfer Status Register
+} AT91S_DBGU, *AT91PS_DBGU;
+
+// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- 
+#define AT91C_US_RSTRX        ((unsigned int) 0x1 <<  2) // (DBGU) Reset Receiver
+#define AT91C_US_RSTTX        ((unsigned int) 0x1 <<  3) // (DBGU) Reset Transmitter
+#define AT91C_US_RXEN         ((unsigned int) 0x1 <<  4) // (DBGU) Receiver Enable
+#define AT91C_US_RXDIS        ((unsigned int) 0x1 <<  5) // (DBGU) Receiver Disable
+#define AT91C_US_TXEN         ((unsigned int) 0x1 <<  6) // (DBGU) Transmitter Enable
+#define AT91C_US_TXDIS        ((unsigned int) 0x1 <<  7) // (DBGU) Transmitter Disable
+// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- 
+#define AT91C_US_PAR          ((unsigned int) 0x7 <<  9) // (DBGU) Parity type
+#define 	AT91C_US_PAR_EVEN                 ((unsigned int) 0x0 <<  9) // (DBGU) Even Parity
+#define 	AT91C_US_PAR_ODD                  ((unsigned int) 0x1 <<  9) // (DBGU) Odd Parity
+#define 	AT91C_US_PAR_SPACE                ((unsigned int) 0x2 <<  9) // (DBGU) Parity forced to 0 (Space)
+#define 	AT91C_US_PAR_MARK                 ((unsigned int) 0x3 <<  9) // (DBGU) Parity forced to 1 (Mark)
+#define 	AT91C_US_PAR_NONE                 ((unsigned int) 0x4 <<  9) // (DBGU) No Parity
+#define 	AT91C_US_PAR_MULTI_DROP           ((unsigned int) 0x6 <<  9) // (DBGU) Multi-drop mode
+#define AT91C_US_CHMODE       ((unsigned int) 0x3 << 14) // (DBGU) Channel Mode
+#define 	AT91C_US_CHMODE_NORMAL               ((unsigned int) 0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART.
+#define 	AT91C_US_CHMODE_AUTO                 ((unsigned int) 0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin.
+#define 	AT91C_US_CHMODE_LOCAL                ((unsigned int) 0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal.
+#define 	AT91C_US_CHMODE_REMOTE               ((unsigned int) 0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin.
+// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
+#define AT91C_US_RXRDY        ((unsigned int) 0x1 <<  0) // (DBGU) RXRDY Interrupt
+#define AT91C_US_TXRDY        ((unsigned int) 0x1 <<  1) // (DBGU) TXRDY Interrupt
+#define AT91C_US_ENDRX        ((unsigned int) 0x1 <<  3) // (DBGU) End of Receive Transfer Interrupt
+#define AT91C_US_ENDTX        ((unsigned int) 0x1 <<  4) // (DBGU) End of Transmit Interrupt
+#define AT91C_US_OVRE         ((unsigned int) 0x1 <<  5) // (DBGU) Overrun Interrupt
+#define AT91C_US_FRAME        ((unsigned int) 0x1 <<  6) // (DBGU) Framing Error Interrupt
+#define AT91C_US_PARE         ((unsigned int) 0x1 <<  7) // (DBGU) Parity Error Interrupt
+#define AT91C_US_TXEMPTY      ((unsigned int) 0x1 <<  9) // (DBGU) TXEMPTY Interrupt
+#define AT91C_US_TXBUFE       ((unsigned int) 0x1 << 11) // (DBGU) TXBUFE Interrupt
+#define AT91C_US_RXBUFF       ((unsigned int) 0x1 << 12) // (DBGU) RXBUFF Interrupt
+#define AT91C_US_COMM_TX      ((unsigned int) 0x1 << 30) // (DBGU) COMM_TX Interrupt
+#define AT91C_US_COMM_RX      ((unsigned int) 0x1 << 31) // (DBGU) COMM_RX Interrupt
+// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
+// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
+// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- 
+// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- 
+#define AT91C_US_FORCE_NTRST  ((unsigned int) 0x1 <<  0) // (DBGU) Force NTRST in JTAG
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Peripheral Data Controller
+// *****************************************************************************
+typedef struct _AT91S_PDC {
+	AT91_REG	 PDC_RPR; 	// Receive Pointer Register
+	AT91_REG	 PDC_RCR; 	// Receive Counter Register
+	AT91_REG	 PDC_TPR; 	// Transmit Pointer Register
+	AT91_REG	 PDC_TCR; 	// Transmit Counter Register
+	AT91_REG	 PDC_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 PDC_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 PDC_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 PDC_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 PDC_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 PDC_PTSR; 	// PDC Transfer Status Register
+} AT91S_PDC, *AT91PS_PDC;
+
+// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- 
+#define AT91C_PDC_RXTEN       ((unsigned int) 0x1 <<  0) // (PDC) Receiver Transfer Enable
+#define AT91C_PDC_RXTDIS      ((unsigned int) 0x1 <<  1) // (PDC) Receiver Transfer Disable
+#define AT91C_PDC_TXTEN       ((unsigned int) 0x1 <<  8) // (PDC) Transmitter Transfer Enable
+#define AT91C_PDC_TXTDIS      ((unsigned int) 0x1 <<  9) // (PDC) Transmitter Transfer Disable
+// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Advanced Interrupt Controller
+// *****************************************************************************
+typedef struct _AT91S_AIC {
+	AT91_REG	 AIC_SMR[32]; 	// Source Mode Register
+	AT91_REG	 AIC_SVR[32]; 	// Source Vector Register
+	AT91_REG	 AIC_IVR; 	// IRQ Vector Register
+	AT91_REG	 AIC_FVR; 	// FIQ Vector Register
+	AT91_REG	 AIC_ISR; 	// Interrupt Status Register
+	AT91_REG	 AIC_IPR; 	// Interrupt Pending Register
+	AT91_REG	 AIC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 AIC_CISR; 	// Core Interrupt Status Register
+	AT91_REG	 Reserved0[2]; 	// 
+	AT91_REG	 AIC_IECR; 	// Interrupt Enable Command Register
+	AT91_REG	 AIC_IDCR; 	// Interrupt Disable Command Register
+	AT91_REG	 AIC_ICCR; 	// Interrupt Clear Command Register
+	AT91_REG	 AIC_ISCR; 	// Interrupt Set Command Register
+	AT91_REG	 AIC_EOICR; 	// End of Interrupt Command Register
+	AT91_REG	 AIC_SPU; 	// Spurious Vector Register
+	AT91_REG	 AIC_DCR; 	// Debug Control Register (Protect)
+	AT91_REG	 Reserved1[1]; 	// 
+	AT91_REG	 AIC_FFER; 	// Fast Forcing Enable Register
+	AT91_REG	 AIC_FFDR; 	// Fast Forcing Disable Register
+	AT91_REG	 AIC_FFSR; 	// Fast Forcing Status Register
+} AT91S_AIC, *AT91PS_AIC;
+
+// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- 
+#define AT91C_AIC_PRIOR       ((unsigned int) 0x7 <<  0) // (AIC) Priority Level
+#define 	AT91C_AIC_PRIOR_LOWEST               ((unsigned int) 0x0) // (AIC) Lowest priority level
+#define 	AT91C_AIC_PRIOR_HIGHEST              ((unsigned int) 0x7) // (AIC) Highest priority level
+#define AT91C_AIC_SRCTYPE     ((unsigned int) 0x3 <<  5) // (AIC) Interrupt Source Type
+#define 	AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE  ((unsigned int) 0x0 <<  5) // (AIC) Internal Sources Code Label Level Sensitive
+#define 	AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED   ((unsigned int) 0x1 <<  5) // (AIC) Internal Sources Code Label Edge triggered
+#define 	AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL       ((unsigned int) 0x2 <<  5) // (AIC) External Sources Code Label High-level Sensitive
+#define 	AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE    ((unsigned int) 0x3 <<  5) // (AIC) External Sources Code Label Positive Edge triggered
+// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- 
+#define AT91C_AIC_NFIQ        ((unsigned int) 0x1 <<  0) // (AIC) NFIQ Status
+#define AT91C_AIC_NIRQ        ((unsigned int) 0x1 <<  1) // (AIC) NIRQ Status
+// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- 
+#define AT91C_AIC_DCR_PROT    ((unsigned int) 0x1 <<  0) // (AIC) Protection Mode
+#define AT91C_AIC_DCR_GMSK    ((unsigned int) 0x1 <<  1) // (AIC) General Mask
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Serial Parallel Interface
+// *****************************************************************************
+typedef struct _AT91S_SPI {
+	AT91_REG	 SPI_CR; 	// Control Register
+	AT91_REG	 SPI_MR; 	// Mode Register
+	AT91_REG	 SPI_RDR; 	// Receive Data Register
+	AT91_REG	 SPI_TDR; 	// Transmit Data Register
+	AT91_REG	 SPI_SR; 	// Status Register
+	AT91_REG	 SPI_IER; 	// Interrupt Enable Register
+	AT91_REG	 SPI_IDR; 	// Interrupt Disable Register
+	AT91_REG	 SPI_IMR; 	// Interrupt Mask Register
+	AT91_REG	 Reserved0[4]; 	// 
+	AT91_REG	 SPI_CSR[4]; 	// Chip Select Register
+	AT91_REG	 Reserved1[48]; 	// 
+	AT91_REG	 SPI_RPR; 	// Receive Pointer Register
+	AT91_REG	 SPI_RCR; 	// Receive Counter Register
+	AT91_REG	 SPI_TPR; 	// Transmit Pointer Register
+	AT91_REG	 SPI_TCR; 	// Transmit Counter Register
+	AT91_REG	 SPI_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 SPI_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 SPI_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 SPI_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 SPI_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 SPI_PTSR; 	// PDC Transfer Status Register
+} AT91S_SPI, *AT91PS_SPI;
+
+// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- 
+#define AT91C_SPI_SPIEN       ((unsigned int) 0x1 <<  0) // (SPI) SPI Enable
+#define AT91C_SPI_SPIDIS      ((unsigned int) 0x1 <<  1) // (SPI) SPI Disable
+#define AT91C_SPI_SWRST       ((unsigned int) 0x1 <<  7) // (SPI) SPI Software reset
+// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- 
+#define AT91C_SPI_MSTR        ((unsigned int) 0x1 <<  0) // (SPI) Master/Slave Mode
+#define AT91C_SPI_PS          ((unsigned int) 0x1 <<  1) // (SPI) Peripheral Select
+#define 	AT91C_SPI_PS_FIXED                ((unsigned int) 0x0 <<  1) // (SPI) Fixed Peripheral Select
+#define 	AT91C_SPI_PS_VARIABLE             ((unsigned int) 0x1 <<  1) // (SPI) Variable Peripheral Select
+#define AT91C_SPI_PCSDEC      ((unsigned int) 0x1 <<  2) // (SPI) Chip Select Decode
+#define AT91C_SPI_DIV32       ((unsigned int) 0x1 <<  3) // (SPI) Clock Selection
+#define AT91C_SPI_MODFDIS     ((unsigned int) 0x1 <<  4) // (SPI) Mode Fault Detection
+#define AT91C_SPI_LLB         ((unsigned int) 0x1 <<  7) // (SPI) Clock Selection
+#define AT91C_SPI_PCS         ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select
+#define AT91C_SPI_DLYBCS      ((unsigned int) 0xFF << 24) // (SPI) Delay Between Chip Selects
+// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- 
+#define AT91C_SPI_RD          ((unsigned int) 0xFFFF <<  0) // (SPI) Receive Data
+#define AT91C_SPI_RPCS        ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status
+// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- 
+#define AT91C_SPI_TD          ((unsigned int) 0xFFFF <<  0) // (SPI) Transmit Data
+#define AT91C_SPI_TPCS        ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status
+// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- 
+#define AT91C_SPI_RDRF        ((unsigned int) 0x1 <<  0) // (SPI) Receive Data Register Full
+#define AT91C_SPI_TDRE        ((unsigned int) 0x1 <<  1) // (SPI) Transmit Data Register Empty
+#define AT91C_SPI_MODF        ((unsigned int) 0x1 <<  2) // (SPI) Mode Fault Error
+#define AT91C_SPI_OVRES       ((unsigned int) 0x1 <<  3) // (SPI) Overrun Error Status
+#define AT91C_SPI_SPENDRX     ((unsigned int) 0x1 <<  4) // (SPI) End of Receiver Transfer
+#define AT91C_SPI_SPENDTX     ((unsigned int) 0x1 <<  5) // (SPI) End of Receiver Transfer
+#define AT91C_SPI_RXBUFF      ((unsigned int) 0x1 <<  6) // (SPI) RXBUFF Interrupt
+#define AT91C_SPI_TXBUFE      ((unsigned int) 0x1 <<  7) // (SPI) TXBUFE Interrupt
+#define AT91C_SPI_SPIENS      ((unsigned int) 0x1 << 16) // (SPI) Enable Status
+// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- 
+// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- 
+// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- 
+// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- 
+#define AT91C_SPI_CPOL        ((unsigned int) 0x1 <<  0) // (SPI) Clock Polarity
+#define AT91C_SPI_NCPHA       ((unsigned int) 0x1 <<  1) // (SPI) Clock Phase
+#define AT91C_SPI_BITS        ((unsigned int) 0xF <<  4) // (SPI) Bits Per Transfer
+#define 	AT91C_SPI_BITS_8                    ((unsigned int) 0x0 <<  4) // (SPI) 8 Bits Per transfer
+#define 	AT91C_SPI_BITS_9                    ((unsigned int) 0x1 <<  4) // (SPI) 9 Bits Per transfer
+#define 	AT91C_SPI_BITS_10                   ((unsigned int) 0x2 <<  4) // (SPI) 10 Bits Per transfer
+#define 	AT91C_SPI_BITS_11                   ((unsigned int) 0x3 <<  4) // (SPI) 11 Bits Per transfer
+#define 	AT91C_SPI_BITS_12                   ((unsigned int) 0x4 <<  4) // (SPI) 12 Bits Per transfer
+#define 	AT91C_SPI_BITS_13                   ((unsigned int) 0x5 <<  4) // (SPI) 13 Bits Per transfer
+#define 	AT91C_SPI_BITS_14                   ((unsigned int) 0x6 <<  4) // (SPI) 14 Bits Per transfer
+#define 	AT91C_SPI_BITS_15                   ((unsigned int) 0x7 <<  4) // (SPI) 15 Bits Per transfer
+#define 	AT91C_SPI_BITS_16                   ((unsigned int) 0x8 <<  4) // (SPI) 16 Bits Per transfer
+#define AT91C_SPI_SCBR        ((unsigned int) 0xFF <<  8) // (SPI) Serial Clock Baud Rate
+#define AT91C_SPI_DLYBS       ((unsigned int) 0xFF << 16) // (SPI) Serial Clock Baud Rate
+#define AT91C_SPI_DLYBCT      ((unsigned int) 0xFF << 24) // (SPI) Delay Between Consecutive Transfers
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Synchronous Serial Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_SSC {
+	AT91_REG	 SSC_CR; 	// Control Register
+	AT91_REG	 SSC_CMR; 	// Clock Mode Register
+	AT91_REG	 Reserved0[2]; 	// 
+	AT91_REG	 SSC_RCMR; 	// Receive Clock ModeRegister
+	AT91_REG	 SSC_RFMR; 	// Receive Frame Mode Register
+	AT91_REG	 SSC_TCMR; 	// Transmit Clock Mode Register
+	AT91_REG	 SSC_TFMR; 	// Transmit Frame Mode Register
+	AT91_REG	 SSC_RHR; 	// Receive Holding Register
+	AT91_REG	 SSC_THR; 	// Transmit Holding Register
+	AT91_REG	 Reserved1[2]; 	// 
+	AT91_REG	 SSC_RSHR; 	// Receive Sync Holding Register
+	AT91_REG	 SSC_TSHR; 	// Transmit Sync Holding Register
+	AT91_REG	 SSC_RC0R; 	// Receive Compare 0 Register
+	AT91_REG	 SSC_RC1R; 	// Receive Compare 1 Register
+	AT91_REG	 SSC_SR; 	// Status Register
+	AT91_REG	 SSC_IER; 	// Interrupt Enable Register
+	AT91_REG	 SSC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 SSC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 Reserved2[44]; 	// 
+	AT91_REG	 SSC_RPR; 	// Receive Pointer Register
+	AT91_REG	 SSC_RCR; 	// Receive Counter Register
+	AT91_REG	 SSC_TPR; 	// Transmit Pointer Register
+	AT91_REG	 SSC_TCR; 	// Transmit Counter Register
+	AT91_REG	 SSC_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 SSC_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 SSC_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 SSC_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 SSC_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 SSC_PTSR; 	// PDC Transfer Status Register
+} AT91S_SSC, *AT91PS_SSC;
+
+// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- 
+#define AT91C_SSC_RXEN        ((unsigned int) 0x1 <<  0) // (SSC) Receive Enable
+#define AT91C_SSC_RXDIS       ((unsigned int) 0x1 <<  1) // (SSC) Receive Disable
+#define AT91C_SSC_TXEN        ((unsigned int) 0x1 <<  8) // (SSC) Transmit Enable
+#define AT91C_SSC_TXDIS       ((unsigned int) 0x1 <<  9) // (SSC) Transmit Disable
+#define AT91C_SSC_SWRST       ((unsigned int) 0x1 << 15) // (SSC) Software Reset
+// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- 
+#define AT91C_SSC_CKS         ((unsigned int) 0x3 <<  0) // (SSC) Receive/Transmit Clock Selection
+#define 	AT91C_SSC_CKS_DIV                  ((unsigned int) 0x0) // (SSC) Divided Clock
+#define 	AT91C_SSC_CKS_TK                   ((unsigned int) 0x1) // (SSC) TK Clock signal
+#define 	AT91C_SSC_CKS_RK                   ((unsigned int) 0x2) // (SSC) RK pin
+#define AT91C_SSC_CKO         ((unsigned int) 0x7 <<  2) // (SSC) Receive/Transmit Clock Output Mode Selection
+#define 	AT91C_SSC_CKO_NONE                 ((unsigned int) 0x0 <<  2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only
+#define 	AT91C_SSC_CKO_CONTINOUS            ((unsigned int) 0x1 <<  2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output
+#define 	AT91C_SSC_CKO_DATA_TX              ((unsigned int) 0x2 <<  2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output
+#define AT91C_SSC_CKI         ((unsigned int) 0x1 <<  5) // (SSC) Receive/Transmit Clock Inversion
+#define AT91C_SSC_CKG         ((unsigned int) 0x3 <<  6) // (SSC) Receive/Transmit Clock Gating Selection
+#define 	AT91C_SSC_CKG_NONE                 ((unsigned int) 0x0 <<  6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock
+#define 	AT91C_SSC_CKG_LOW                  ((unsigned int) 0x1 <<  6) // (SSC) Receive/Transmit Clock enabled only if RF Low
+#define 	AT91C_SSC_CKG_HIGH                 ((unsigned int) 0x2 <<  6) // (SSC) Receive/Transmit Clock enabled only if RF High
+#define AT91C_SSC_START       ((unsigned int) 0xF <<  8) // (SSC) Receive/Transmit Start Selection
+#define 	AT91C_SSC_START_CONTINOUS            ((unsigned int) 0x0 <<  8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
+#define 	AT91C_SSC_START_TX                   ((unsigned int) 0x1 <<  8) // (SSC) Transmit/Receive start
+#define 	AT91C_SSC_START_LOW_RF               ((unsigned int) 0x2 <<  8) // (SSC) Detection of a low level on RF input
+#define 	AT91C_SSC_START_HIGH_RF              ((unsigned int) 0x3 <<  8) // (SSC) Detection of a high level on RF input
+#define 	AT91C_SSC_START_FALL_RF              ((unsigned int) 0x4 <<  8) // (SSC) Detection of a falling edge on RF input
+#define 	AT91C_SSC_START_RISE_RF              ((unsigned int) 0x5 <<  8) // (SSC) Detection of a rising edge on RF input
+#define 	AT91C_SSC_START_LEVEL_RF             ((unsigned int) 0x6 <<  8) // (SSC) Detection of any level change on RF input
+#define 	AT91C_SSC_START_EDGE_RF              ((unsigned int) 0x7 <<  8) // (SSC) Detection of any edge on RF input
+#define 	AT91C_SSC_START_0                    ((unsigned int) 0x8 <<  8) // (SSC) Compare 0
+#define AT91C_SSC_STOP        ((unsigned int) 0x1 << 12) // (SSC) Receive Stop Selection
+#define AT91C_SSC_STTOUT      ((unsigned int) 0x1 << 15) // (SSC) Receive/Transmit Start Output Selection
+#define AT91C_SSC_STTDLY      ((unsigned int) 0xFF << 16) // (SSC) Receive/Transmit Start Delay
+#define AT91C_SSC_PERIOD      ((unsigned int) 0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection
+// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- 
+#define AT91C_SSC_DATLEN      ((unsigned int) 0x1F <<  0) // (SSC) Data Length
+#define AT91C_SSC_LOOP        ((unsigned int) 0x1 <<  5) // (SSC) Loop Mode
+#define AT91C_SSC_MSBF        ((unsigned int) 0x1 <<  7) // (SSC) Most Significant Bit First
+#define AT91C_SSC_DATNB       ((unsigned int) 0xF <<  8) // (SSC) Data Number per Frame
+#define AT91C_SSC_FSLEN       ((unsigned int) 0xF << 16) // (SSC) Receive/Transmit Frame Sync length
+#define AT91C_SSC_FSOS        ((unsigned int) 0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection
+#define 	AT91C_SSC_FSOS_NONE                 ((unsigned int) 0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only
+#define 	AT91C_SSC_FSOS_NEGATIVE             ((unsigned int) 0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse
+#define 	AT91C_SSC_FSOS_POSITIVE             ((unsigned int) 0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse
+#define 	AT91C_SSC_FSOS_LOW                  ((unsigned int) 0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer
+#define 	AT91C_SSC_FSOS_HIGH                 ((unsigned int) 0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer
+#define 	AT91C_SSC_FSOS_TOGGLE               ((unsigned int) 0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer
+#define AT91C_SSC_FSEDGE      ((unsigned int) 0x1 << 24) // (SSC) Frame Sync Edge Detection
+// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- 
+// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- 
+#define AT91C_SSC_DATDEF      ((unsigned int) 0x1 <<  5) // (SSC) Data Default Value
+#define AT91C_SSC_FSDEN       ((unsigned int) 0x1 << 23) // (SSC) Frame Sync Data Enable
+// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- 
+#define AT91C_SSC_TXRDY       ((unsigned int) 0x1 <<  0) // (SSC) Transmit Ready
+#define AT91C_SSC_TXEMPTY     ((unsigned int) 0x1 <<  1) // (SSC) Transmit Empty
+#define AT91C_SSC_ENDTX       ((unsigned int) 0x1 <<  2) // (SSC) End Of Transmission
+#define AT91C_SSC_TXBUFE      ((unsigned int) 0x1 <<  3) // (SSC) Transmit Buffer Empty
+#define AT91C_SSC_RXRDY       ((unsigned int) 0x1 <<  4) // (SSC) Receive Ready
+#define AT91C_SSC_OVRUN       ((unsigned int) 0x1 <<  5) // (SSC) Receive Overrun
+#define AT91C_SSC_ENDRX       ((unsigned int) 0x1 <<  6) // (SSC) End of Reception
+#define AT91C_SSC_RXBUFF      ((unsigned int) 0x1 <<  7) // (SSC) Receive Buffer Full
+#define AT91C_SSC_CP0         ((unsigned int) 0x1 <<  8) // (SSC) Compare 0
+#define AT91C_SSC_CP1         ((unsigned int) 0x1 <<  9) // (SSC) Compare 1
+#define AT91C_SSC_TXSYN       ((unsigned int) 0x1 << 10) // (SSC) Transmit Sync
+#define AT91C_SSC_RXSYN       ((unsigned int) 0x1 << 11) // (SSC) Receive Sync
+#define AT91C_SSC_TXENA       ((unsigned int) 0x1 << 16) // (SSC) Transmit Enable
+#define AT91C_SSC_RXENA       ((unsigned int) 0x1 << 17) // (SSC) Receive Enable
+// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- 
+// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- 
+// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Usart
+// *****************************************************************************
+typedef struct _AT91S_USART {
+	AT91_REG	 US_CR; 	// Control Register
+	AT91_REG	 US_MR; 	// Mode Register
+	AT91_REG	 US_IER; 	// Interrupt Enable Register
+	AT91_REG	 US_IDR; 	// Interrupt Disable Register
+	AT91_REG	 US_IMR; 	// Interrupt Mask Register
+	AT91_REG	 US_CSR; 	// Channel Status Register
+	AT91_REG	 US_RHR; 	// Receiver Holding Register
+	AT91_REG	 US_THR; 	// Transmitter Holding Register
+	AT91_REG	 US_BRGR; 	// Baud Rate Generator Register
+	AT91_REG	 US_RTOR; 	// Receiver Time-out Register
+	AT91_REG	 US_TTGR; 	// Transmitter Time-guard Register
+	AT91_REG	 Reserved0[5]; 	// 
+	AT91_REG	 US_FIDI; 	// FI_DI_Ratio Register
+	AT91_REG	 US_NER; 	// Nb Errors Register
+	AT91_REG	 US_XXR; 	// XON_XOFF Register
+	AT91_REG	 US_IF; 	// IRDA_FILTER Register
+	AT91_REG	 Reserved1[44]; 	// 
+	AT91_REG	 US_RPR; 	// Receive Pointer Register
+	AT91_REG	 US_RCR; 	// Receive Counter Register
+	AT91_REG	 US_TPR; 	// Transmit Pointer Register
+	AT91_REG	 US_TCR; 	// Transmit Counter Register
+	AT91_REG	 US_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 US_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 US_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 US_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 US_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 US_PTSR; 	// PDC Transfer Status Register
+} AT91S_USART, *AT91PS_USART;
+
+// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- 
+#define AT91C_US_RSTSTA       ((unsigned int) 0x1 <<  8) // (USART) Reset Status Bits
+#define AT91C_US_STTBRK       ((unsigned int) 0x1 <<  9) // (USART) Start Break
+#define AT91C_US_STPBRK       ((unsigned int) 0x1 << 10) // (USART) Stop Break
+#define AT91C_US_STTTO        ((unsigned int) 0x1 << 11) // (USART) Start Time-out
+#define AT91C_US_SENDA        ((unsigned int) 0x1 << 12) // (USART) Send Address
+#define AT91C_US_RSTIT        ((unsigned int) 0x1 << 13) // (USART) Reset Iterations
+#define AT91C_US_RSTNACK      ((unsigned int) 0x1 << 14) // (USART) Reset Non Acknowledge
+#define AT91C_US_RETTO        ((unsigned int) 0x1 << 15) // (USART) Rearm Time-out
+#define AT91C_US_DTREN        ((unsigned int) 0x1 << 16) // (USART) Data Terminal ready Enable
+#define AT91C_US_DTRDIS       ((unsigned int) 0x1 << 17) // (USART) Data Terminal ready Disable
+#define AT91C_US_RTSEN        ((unsigned int) 0x1 << 18) // (USART) Request to Send enable
+#define AT91C_US_RTSDIS       ((unsigned int) 0x1 << 19) // (USART) Request to Send Disable
+// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- 
+#define AT91C_US_USMODE       ((unsigned int) 0xF <<  0) // (USART) Usart mode
+#define 	AT91C_US_USMODE_NORMAL               ((unsigned int) 0x0) // (USART) Normal
+#define 	AT91C_US_USMODE_RS485                ((unsigned int) 0x1) // (USART) RS485
+#define 	AT91C_US_USMODE_HWHSH                ((unsigned int) 0x2) // (USART) Hardware Handshaking
+#define 	AT91C_US_USMODE_MODEM                ((unsigned int) 0x3) // (USART) Modem
+#define 	AT91C_US_USMODE_ISO7816_0            ((unsigned int) 0x4) // (USART) ISO7816 protocol: T = 0
+#define 	AT91C_US_USMODE_ISO7816_1            ((unsigned int) 0x6) // (USART) ISO7816 protocol: T = 1
+#define 	AT91C_US_USMODE_IRDA                 ((unsigned int) 0x8) // (USART) IrDA
+#define 	AT91C_US_USMODE_SWHSH                ((unsigned int) 0xC) // (USART) Software Handshaking
+#define AT91C_US_CLKS         ((unsigned int) 0x3 <<  4) // (USART) Clock Selection (Baud Rate generator Input Clock
+#define 	AT91C_US_CLKS_CLOCK                ((unsigned int) 0x0 <<  4) // (USART) Clock
+#define 	AT91C_US_CLKS_FDIV1                ((unsigned int) 0x1 <<  4) // (USART) fdiv1
+#define 	AT91C_US_CLKS_SLOW                 ((unsigned int) 0x2 <<  4) // (USART) slow_clock (ARM)
+#define 	AT91C_US_CLKS_EXT                  ((unsigned int) 0x3 <<  4) // (USART) External (SCK)
+#define AT91C_US_CHRL         ((unsigned int) 0x3 <<  6) // (USART) Clock Selection (Baud Rate generator Input Clock
+#define 	AT91C_US_CHRL_5_BITS               ((unsigned int) 0x0 <<  6) // (USART) Character Length: 5 bits
+#define 	AT91C_US_CHRL_6_BITS               ((unsigned int) 0x1 <<  6) // (USART) Character Length: 6 bits
+#define 	AT91C_US_CHRL_7_BITS               ((unsigned int) 0x2 <<  6) // (USART) Character Length: 7 bits
+#define 	AT91C_US_CHRL_8_BITS               ((unsigned int) 0x3 <<  6) // (USART) Character Length: 8 bits
+#define AT91C_US_SYNC         ((unsigned int) 0x1 <<  8) // (USART) Synchronous Mode Select
+#define AT91C_US_NBSTOP       ((unsigned int) 0x3 << 12) // (USART) Number of Stop bits
+#define 	AT91C_US_NBSTOP_1_BIT                ((unsigned int) 0x0 << 12) // (USART) 1 stop bit
+#define 	AT91C_US_NBSTOP_15_BIT               ((unsigned int) 0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits
+#define 	AT91C_US_NBSTOP_2_BIT                ((unsigned int) 0x2 << 12) // (USART) 2 stop bits
+#define AT91C_US_MSBF         ((unsigned int) 0x1 << 16) // (USART) Bit Order
+#define AT91C_US_MODE9        ((unsigned int) 0x1 << 17) // (USART) 9-bit Character length
+#define AT91C_US_CKLO         ((unsigned int) 0x1 << 18) // (USART) Clock Output Select
+#define AT91C_US_OVER         ((unsigned int) 0x1 << 19) // (USART) Over Sampling Mode
+#define AT91C_US_INACK        ((unsigned int) 0x1 << 20) // (USART) Inhibit Non Acknowledge
+#define AT91C_US_DSNACK       ((unsigned int) 0x1 << 21) // (USART) Disable Successive NACK
+#define AT91C_US_MAX_ITER     ((unsigned int) 0x1 << 24) // (USART) Number of Repetitions
+#define AT91C_US_FILTER       ((unsigned int) 0x1 << 28) // (USART) Receive Line Filter
+// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
+#define AT91C_US_RXBRK        ((unsigned int) 0x1 <<  2) // (USART) Break Received/End of Break
+#define AT91C_US_TIMEOUT      ((unsigned int) 0x1 <<  8) // (USART) Receiver Time-out
+#define AT91C_US_ITERATION    ((unsigned int) 0x1 << 10) // (USART) Max number of Repetitions Reached
+#define AT91C_US_NACK         ((unsigned int) 0x1 << 13) // (USART) Non Acknowledge
+#define AT91C_US_RIIC         ((unsigned int) 0x1 << 16) // (USART) Ring INdicator Input Change Flag
+#define AT91C_US_DSRIC        ((unsigned int) 0x1 << 17) // (USART) Data Set Ready Input Change Flag
+#define AT91C_US_DCDIC        ((unsigned int) 0x1 << 18) // (USART) Data Carrier Flag
+#define AT91C_US_CTSIC        ((unsigned int) 0x1 << 19) // (USART) Clear To Send Input Change Flag
+// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
+// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
+// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- 
+#define AT91C_US_RI           ((unsigned int) 0x1 << 20) // (USART) Image of RI Input
+#define AT91C_US_DSR          ((unsigned int) 0x1 << 21) // (USART) Image of DSR Input
+#define AT91C_US_DCD          ((unsigned int) 0x1 << 22) // (USART) Image of DCD Input
+#define AT91C_US_CTS          ((unsigned int) 0x1 << 23) // (USART) Image of CTS Input
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Two-wire Interface
+// *****************************************************************************
+typedef struct _AT91S_TWI {
+	AT91_REG	 TWI_CR; 	// Control Register
+	AT91_REG	 TWI_MMR; 	// Master Mode Register
+	AT91_REG	 TWI_SMR; 	// Slave Mode Register
+	AT91_REG	 TWI_IADR; 	// Internal Address Register
+	AT91_REG	 TWI_CWGR; 	// Clock Waveform Generator Register
+	AT91_REG	 Reserved0[3]; 	// 
+	AT91_REG	 TWI_SR; 	// Status Register
+	AT91_REG	 TWI_IER; 	// Interrupt Enable Register
+	AT91_REG	 TWI_IDR; 	// Interrupt Disable Register
+	AT91_REG	 TWI_IMR; 	// Interrupt Mask Register
+	AT91_REG	 TWI_RHR; 	// Receive Holding Register
+	AT91_REG	 TWI_THR; 	// Transmit Holding Register
+} AT91S_TWI, *AT91PS_TWI;
+
+// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- 
+#define AT91C_TWI_START       ((unsigned int) 0x1 <<  0) // (TWI) Send a START Condition
+#define AT91C_TWI_STOP        ((unsigned int) 0x1 <<  1) // (TWI) Send a STOP Condition
+#define AT91C_TWI_MSEN        ((unsigned int) 0x1 <<  2) // (TWI) TWI Master Transfer Enabled
+#define AT91C_TWI_MSDIS       ((unsigned int) 0x1 <<  3) // (TWI) TWI Master Transfer Disabled
+#define AT91C_TWI_SVEN        ((unsigned int) 0x1 <<  4) // (TWI) TWI Slave Transfer Enabled
+#define AT91C_TWI_SVDIS       ((unsigned int) 0x1 <<  5) // (TWI) TWI Slave Transfer Disabled
+#define AT91C_TWI_SWRST       ((unsigned int) 0x1 <<  7) // (TWI) Software Reset
+// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- 
+#define AT91C_TWI_IADRSZ      ((unsigned int) 0x3 <<  8) // (TWI) Internal Device Address Size
+#define 	AT91C_TWI_IADRSZ_NO                   ((unsigned int) 0x0 <<  8) // (TWI) No internal device address
+#define 	AT91C_TWI_IADRSZ_1_BYTE               ((unsigned int) 0x1 <<  8) // (TWI) One-byte internal device address
+#define 	AT91C_TWI_IADRSZ_2_BYTE               ((unsigned int) 0x2 <<  8) // (TWI) Two-byte internal device address
+#define 	AT91C_TWI_IADRSZ_3_BYTE               ((unsigned int) 0x3 <<  8) // (TWI) Three-byte internal device address
+#define AT91C_TWI_MREAD       ((unsigned int) 0x1 << 12) // (TWI) Master Read Direction
+#define AT91C_TWI_DADR        ((unsigned int) 0x7F << 16) // (TWI) Device Address
+// -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- 
+#define AT91C_TWI_SADR        ((unsigned int) 0x7F << 16) // (TWI) Slave Device Address
+// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- 
+#define AT91C_TWI_CLDIV       ((unsigned int) 0xFF <<  0) // (TWI) Clock Low Divider
+#define AT91C_TWI_CHDIV       ((unsigned int) 0xFF <<  8) // (TWI) Clock High Divider
+#define AT91C_TWI_CKDIV       ((unsigned int) 0x7 << 16) // (TWI) Clock Divider
+// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- 
+#define AT91C_TWI_TXCOMP      ((unsigned int) 0x1 <<  0) // (TWI) Transmission Completed
+#define AT91C_TWI_RXRDY       ((unsigned int) 0x1 <<  1) // (TWI) Receive holding register ReaDY
+#define AT91C_TWI_TXRDY       ((unsigned int) 0x1 <<  2) // (TWI) Transmit holding register ReaDY
+#define AT91C_TWI_SVREAD      ((unsigned int) 0x1 <<  3) // (TWI) Slave Read
+#define AT91C_TWI_SVACC       ((unsigned int) 0x1 <<  4) // (TWI) Slave Access
+#define AT91C_TWI_GCACC       ((unsigned int) 0x1 <<  5) // (TWI) General Call Access
+#define AT91C_TWI_OVRE        ((unsigned int) 0x1 <<  6) // (TWI) Overrun Error
+#define AT91C_TWI_UNRE        ((unsigned int) 0x1 <<  7) // (TWI) Underrun Error
+#define AT91C_TWI_NACK        ((unsigned int) 0x1 <<  8) // (TWI) Not Acknowledged
+#define AT91C_TWI_ARBLST      ((unsigned int) 0x1 <<  9) // (TWI) Arbitration Lost
+// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- 
+// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- 
+// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Multimedia Card Interface
+// *****************************************************************************
+typedef struct _AT91S_MCI {
+	AT91_REG	 MCI_CR; 	// MCI Control Register
+	AT91_REG	 MCI_MR; 	// MCI Mode Register
+	AT91_REG	 MCI_DTOR; 	// MCI Data Timeout Register
+	AT91_REG	 MCI_SDCR; 	// MCI SD Card Register
+	AT91_REG	 MCI_ARGR; 	// MCI Argument Register
+	AT91_REG	 MCI_CMDR; 	// MCI Command Register
+	AT91_REG	 Reserved0[2]; 	// 
+	AT91_REG	 MCI_RSPR[4]; 	// MCI Response Register
+	AT91_REG	 MCI_RDR; 	// MCI Receive Data Register
+	AT91_REG	 MCI_TDR; 	// MCI Transmit Data Register
+	AT91_REG	 Reserved1[2]; 	// 
+	AT91_REG	 MCI_SR; 	// MCI Status Register
+	AT91_REG	 MCI_IER; 	// MCI Interrupt Enable Register
+	AT91_REG	 MCI_IDR; 	// MCI Interrupt Disable Register
+	AT91_REG	 MCI_IMR; 	// MCI Interrupt Mask Register
+	AT91_REG	 Reserved2[44]; 	// 
+	AT91_REG	 MCI_RPR; 	// Receive Pointer Register
+	AT91_REG	 MCI_RCR; 	// Receive Counter Register
+	AT91_REG	 MCI_TPR; 	// Transmit Pointer Register
+	AT91_REG	 MCI_TCR; 	// Transmit Counter Register
+	AT91_REG	 MCI_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 MCI_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 MCI_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 MCI_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 MCI_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 MCI_PTSR; 	// PDC Transfer Status Register
+} AT91S_MCI, *AT91PS_MCI;
+
+// -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- 
+#define AT91C_MCI_MCIEN       ((unsigned int) 0x1 <<  0) // (MCI) Multimedia Interface Enable
+#define AT91C_MCI_MCIDIS      ((unsigned int) 0x1 <<  1) // (MCI) Multimedia Interface Disable
+#define AT91C_MCI_PWSEN       ((unsigned int) 0x1 <<  2) // (MCI) Power Save Mode Enable
+#define AT91C_MCI_PWSDIS      ((unsigned int) 0x1 <<  3) // (MCI) Power Save Mode Disable
+// -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- 
+#define AT91C_MCI_CLKDIV      ((unsigned int) 0x1 <<  0) // (MCI) Clock Divider
+#define AT91C_MCI_PWSDIV      ((unsigned int) 0x1 <<  8) // (MCI) Power Saving Divider
+#define AT91C_MCI_PDCPADV     ((unsigned int) 0x1 << 14) // (MCI) PDC Padding Value
+#define AT91C_MCI_PDCMODE     ((unsigned int) 0x1 << 15) // (MCI) PDC Oriented Mode
+#define AT91C_MCI_BLKLEN      ((unsigned int) 0x1 << 18) // (MCI) Data Block Length
+// -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- 
+#define AT91C_MCI_DTOCYC      ((unsigned int) 0x1 <<  0) // (MCI) Data Timeout Cycle Number
+#define AT91C_MCI_DTOMUL      ((unsigned int) 0x7 <<  4) // (MCI) Data Timeout Multiplier
+#define 	AT91C_MCI_DTOMUL_1                    ((unsigned int) 0x0 <<  4) // (MCI) DTOCYC x 1
+#define 	AT91C_MCI_DTOMUL_16                   ((unsigned int) 0x1 <<  4) // (MCI) DTOCYC x 16
+#define 	AT91C_MCI_DTOMUL_128                  ((unsigned int) 0x2 <<  4) // (MCI) DTOCYC x 128
+#define 	AT91C_MCI_DTOMUL_256                  ((unsigned int) 0x3 <<  4) // (MCI) DTOCYC x 256
+#define 	AT91C_MCI_DTOMUL_1024                 ((unsigned int) 0x4 <<  4) // (MCI) DTOCYC x 1024
+#define 	AT91C_MCI_DTOMUL_4096                 ((unsigned int) 0x5 <<  4) // (MCI) DTOCYC x 4096
+#define 	AT91C_MCI_DTOMUL_65536                ((unsigned int) 0x6 <<  4) // (MCI) DTOCYC x 65536
+#define 	AT91C_MCI_DTOMUL_1048576              ((unsigned int) 0x7 <<  4) // (MCI) DTOCYC x 1048576
+// -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- 
+#define AT91C_MCI_SCDSEL      ((unsigned int) 0x1 <<  0) // (MCI) SD Card Selector
+#define AT91C_MCI_SCDBUS      ((unsigned int) 0x1 <<  7) // (MCI) SD Card Bus Width
+// -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- 
+#define AT91C_MCI_CMDNB       ((unsigned int) 0x1F <<  0) // (MCI) Command Number
+#define AT91C_MCI_RSPTYP      ((unsigned int) 0x3 <<  6) // (MCI) Response Type
+#define 	AT91C_MCI_RSPTYP_NO                   ((unsigned int) 0x0 <<  6) // (MCI) No response
+#define 	AT91C_MCI_RSPTYP_48                   ((unsigned int) 0x1 <<  6) // (MCI) 48-bit response
+#define 	AT91C_MCI_RSPTYP_136                  ((unsigned int) 0x2 <<  6) // (MCI) 136-bit response
+#define AT91C_MCI_SPCMD       ((unsigned int) 0x7 <<  8) // (MCI) Special CMD
+#define 	AT91C_MCI_SPCMD_NONE                 ((unsigned int) 0x0 <<  8) // (MCI) Not a special CMD
+#define 	AT91C_MCI_SPCMD_INIT                 ((unsigned int) 0x1 <<  8) // (MCI) Initialization CMD
+#define 	AT91C_MCI_SPCMD_SYNC                 ((unsigned int) 0x2 <<  8) // (MCI) Synchronized CMD
+#define 	AT91C_MCI_SPCMD_IT_CMD               ((unsigned int) 0x4 <<  8) // (MCI) Interrupt command
+#define 	AT91C_MCI_SPCMD_IT_REP               ((unsigned int) 0x5 <<  8) // (MCI) Interrupt response
+#define AT91C_MCI_OPDCMD      ((unsigned int) 0x1 << 11) // (MCI) Open Drain Command
+#define AT91C_MCI_MAXLAT      ((unsigned int) 0x1 << 12) // (MCI) Maximum Latency for Command to respond
+#define AT91C_MCI_TRCMD       ((unsigned int) 0x3 << 16) // (MCI) Transfer CMD
+#define 	AT91C_MCI_TRCMD_NO                   ((unsigned int) 0x0 << 16) // (MCI) No transfer
+#define 	AT91C_MCI_TRCMD_START                ((unsigned int) 0x1 << 16) // (MCI) Start transfer
+#define 	AT91C_MCI_TRCMD_STOP                 ((unsigned int) 0x2 << 16) // (MCI) Stop transfer
+#define AT91C_MCI_TRDIR       ((unsigned int) 0x1 << 18) // (MCI) Transfer Direction
+#define AT91C_MCI_TRTYP       ((unsigned int) 0x3 << 19) // (MCI) Transfer Type
+#define 	AT91C_MCI_TRTYP_BLOCK                ((unsigned int) 0x0 << 19) // (MCI) Block Transfer type
+#define 	AT91C_MCI_TRTYP_MULTIPLE             ((unsigned int) 0x1 << 19) // (MCI) Multiple Block transfer type
+#define 	AT91C_MCI_TRTYP_STREAM               ((unsigned int) 0x2 << 19) // (MCI) Stream transfer type
+// -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- 
+#define AT91C_MCI_CMDRDY      ((unsigned int) 0x1 <<  0) // (MCI) Command Ready flag
+#define AT91C_MCI_RXRDY       ((unsigned int) 0x1 <<  1) // (MCI) RX Ready flag
+#define AT91C_MCI_TXRDY       ((unsigned int) 0x1 <<  2) // (MCI) TX Ready flag
+#define AT91C_MCI_BLKE        ((unsigned int) 0x1 <<  3) // (MCI) Data Block Transfer Ended flag
+#define AT91C_MCI_DTIP        ((unsigned int) 0x1 <<  4) // (MCI) Data Transfer in Progress flag
+#define AT91C_MCI_NOTBUSY     ((unsigned int) 0x1 <<  5) // (MCI) Data Line Not Busy flag
+#define AT91C_MCI_ENDRX       ((unsigned int) 0x1 <<  6) // (MCI) End of RX Buffer flag
+#define AT91C_MCI_ENDTX       ((unsigned int) 0x1 <<  7) // (MCI) End of TX Buffer flag
+#define AT91C_MCI_RXBUFF      ((unsigned int) 0x1 << 14) // (MCI) RX Buffer Full flag
+#define AT91C_MCI_TXBUFE      ((unsigned int) 0x1 << 15) // (MCI) TX Buffer Empty flag
+#define AT91C_MCI_RINDE       ((unsigned int) 0x1 << 16) // (MCI) Response Index Error flag
+#define AT91C_MCI_RDIRE       ((unsigned int) 0x1 << 17) // (MCI) Response Direction Error flag
+#define AT91C_MCI_RCRCE       ((unsigned int) 0x1 << 18) // (MCI) Response CRC Error flag
+#define AT91C_MCI_RENDE       ((unsigned int) 0x1 << 19) // (MCI) Response End Bit Error flag
+#define AT91C_MCI_RTOE        ((unsigned int) 0x1 << 20) // (MCI) Response Time-out Error flag
+#define AT91C_MCI_DCRCE       ((unsigned int) 0x1 << 21) // (MCI) data CRC Error flag
+#define AT91C_MCI_DTOE        ((unsigned int) 0x1 << 22) // (MCI) Data timeout Error flag
+#define AT91C_MCI_OVRE        ((unsigned int) 0x1 << 30) // (MCI) Overrun flag
+#define AT91C_MCI_UNRE        ((unsigned int) 0x1 << 31) // (MCI) Underrun flag
+// -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- 
+// -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- 
+// -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR USB Device Interface
+// *****************************************************************************
+typedef struct _AT91S_UDP {
+	AT91_REG	 UDP_NUM; 	// Frame Number Register
+	AT91_REG	 UDP_GLBSTATE; 	// Global State Register
+	AT91_REG	 UDP_FADDR; 	// Function Address Register
+	AT91_REG	 Reserved0[1]; 	// 
+	AT91_REG	 UDP_IER; 	// Interrupt Enable Register
+	AT91_REG	 UDP_IDR; 	// Interrupt Disable Register
+	AT91_REG	 UDP_IMR; 	// Interrupt Mask Register
+	AT91_REG	 UDP_ISR; 	// Interrupt Status Register
+	AT91_REG	 UDP_ICR; 	// Interrupt Clear Register
+	AT91_REG	 Reserved1[1]; 	// 
+	AT91_REG	 UDP_RSTEP; 	// Reset Endpoint Register
+	AT91_REG	 Reserved2[1]; 	// 
+	AT91_REG	 UDP_CSR[8]; 	// Endpoint Control and Status Register
+	AT91_REG	 UDP_FDR[8]; 	// Endpoint FIFO Data Register
+} AT91S_UDP, *AT91PS_UDP;
+
+// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- 
+#define AT91C_UDP_FRM_NUM     ((unsigned int) 0x7FF <<  0) // (UDP) Frame Number as Defined in the Packet Field Formats
+#define AT91C_UDP_FRM_ERR     ((unsigned int) 0x1 << 16) // (UDP) Frame Error
+#define AT91C_UDP_FRM_OK      ((unsigned int) 0x1 << 17) // (UDP) Frame OK
+// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- 
+#define AT91C_UDP_FADDEN      ((unsigned int) 0x1 <<  0) // (UDP) Function Address Enable
+#define AT91C_UDP_CONFG       ((unsigned int) 0x1 <<  1) // (UDP) Configured
+#define AT91C_UDP_RMWUPE      ((unsigned int) 0x1 <<  2) // (UDP) Remote Wake Up Enable
+#define AT91C_UDP_RSMINPR     ((unsigned int) 0x1 <<  3) // (UDP) A Resume Has Been Sent to the Host
+// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- 
+#define AT91C_UDP_FADD        ((unsigned int) 0xFF <<  0) // (UDP) Function Address Value
+#define AT91C_UDP_FEN         ((unsigned int) 0x1 <<  8) // (UDP) Function Enable
+// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- 
+#define AT91C_UDP_EPINT0      ((unsigned int) 0x1 <<  0) // (UDP) Endpoint 0 Interrupt
+#define AT91C_UDP_EPINT1      ((unsigned int) 0x1 <<  1) // (UDP) Endpoint 0 Interrupt
+#define AT91C_UDP_EPINT2      ((unsigned int) 0x1 <<  2) // (UDP) Endpoint 2 Interrupt
+#define AT91C_UDP_EPINT3      ((unsigned int) 0x1 <<  3) // (UDP) Endpoint 3 Interrupt
+#define AT91C_UDP_EPINT4      ((unsigned int) 0x1 <<  4) // (UDP) Endpoint 4 Interrupt
+#define AT91C_UDP_EPINT5      ((unsigned int) 0x1 <<  5) // (UDP) Endpoint 5 Interrupt
+#define AT91C_UDP_EPINT6      ((unsigned int) 0x1 <<  6) // (UDP) Endpoint 6 Interrupt
+#define AT91C_UDP_EPINT7      ((unsigned int) 0x1 <<  7) // (UDP) Endpoint 7 Interrupt
+#define AT91C_UDP_RXSUSP      ((unsigned int) 0x1 <<  8) // (UDP) USB Suspend Interrupt
+#define AT91C_UDP_RXRSM       ((unsigned int) 0x1 <<  9) // (UDP) USB Resume Interrupt
+#define AT91C_UDP_EXTRSM      ((unsigned int) 0x1 << 10) // (UDP) USB External Resume Interrupt
+#define AT91C_UDP_SOFINT      ((unsigned int) 0x1 << 11) // (UDP) USB Start Of frame Interrupt
+#define AT91C_UDP_WAKEUP      ((unsigned int) 0x1 << 13) // (UDP) USB Resume Interrupt
+// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- 
+// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- 
+// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- 
+#define AT91C_UDP_ENDBUSRES   ((unsigned int) 0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt
+// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- 
+// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- 
+#define AT91C_UDP_EP0         ((unsigned int) 0x1 <<  0) // (UDP) Reset Endpoint 0
+#define AT91C_UDP_EP1         ((unsigned int) 0x1 <<  1) // (UDP) Reset Endpoint 1
+#define AT91C_UDP_EP2         ((unsigned int) 0x1 <<  2) // (UDP) Reset Endpoint 2
+#define AT91C_UDP_EP3         ((unsigned int) 0x1 <<  3) // (UDP) Reset Endpoint 3
+#define AT91C_UDP_EP4         ((unsigned int) 0x1 <<  4) // (UDP) Reset Endpoint 4
+#define AT91C_UDP_EP5         ((unsigned int) 0x1 <<  5) // (UDP) Reset Endpoint 5
+#define AT91C_UDP_EP6         ((unsigned int) 0x1 <<  6) // (UDP) Reset Endpoint 6
+#define AT91C_UDP_EP7         ((unsigned int) 0x1 <<  7) // (UDP) Reset Endpoint 7
+// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- 
+#define AT91C_UDP_TXCOMP      ((unsigned int) 0x1 <<  0) // (UDP) Generates an IN packet with data previously written in the DPR
+#define AT91C_UDP_RX_DATA_BK0 ((unsigned int) 0x1 <<  1) // (UDP) Receive Data Bank 0
+#define AT91C_UDP_RXSETUP     ((unsigned int) 0x1 <<  2) // (UDP) Sends STALL to the Host (Control endpoints)
+#define AT91C_UDP_ISOERROR    ((unsigned int) 0x1 <<  3) // (UDP) Isochronous error (Isochronous endpoints)
+#define AT91C_UDP_TXPKTRDY    ((unsigned int) 0x1 <<  4) // (UDP) Transmit Packet Ready
+#define AT91C_UDP_FORCESTALL  ((unsigned int) 0x1 <<  5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints).
+#define AT91C_UDP_RX_DATA_BK1 ((unsigned int) 0x1 <<  6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes).
+#define AT91C_UDP_DIR         ((unsigned int) 0x1 <<  7) // (UDP) Transfer Direction
+#define AT91C_UDP_EPTYPE      ((unsigned int) 0x7 <<  8) // (UDP) Endpoint type
+#define 	AT91C_UDP_EPTYPE_CTRL                 ((unsigned int) 0x0 <<  8) // (UDP) Control
+#define 	AT91C_UDP_EPTYPE_ISO_OUT              ((unsigned int) 0x1 <<  8) // (UDP) Isochronous OUT
+#define 	AT91C_UDP_EPTYPE_BULK_OUT             ((unsigned int) 0x2 <<  8) // (UDP) Bulk OUT
+#define 	AT91C_UDP_EPTYPE_INT_OUT              ((unsigned int) 0x3 <<  8) // (UDP) Interrupt OUT
+#define 	AT91C_UDP_EPTYPE_ISO_IN               ((unsigned int) 0x5 <<  8) // (UDP) Isochronous IN
+#define 	AT91C_UDP_EPTYPE_BULK_IN              ((unsigned int) 0x6 <<  8) // (UDP) Bulk IN
+#define 	AT91C_UDP_EPTYPE_INT_IN               ((unsigned int) 0x7 <<  8) // (UDP) Interrupt IN
+#define AT91C_UDP_DTGLE       ((unsigned int) 0x1 << 11) // (UDP) Data Toggle
+#define AT91C_UDP_EPEDS       ((unsigned int) 0x1 << 15) // (UDP) Endpoint Enable Disable
+#define AT91C_UDP_RXBYTECNT   ((unsigned int) 0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface
+// *****************************************************************************
+typedef struct _AT91S_TC {
+	AT91_REG	 TC_CCR; 	// Channel Control Register
+	AT91_REG	 TC_CMR; 	// Channel Mode Register
+	AT91_REG	 Reserved0[2]; 	// 
+	AT91_REG	 TC_CV; 	// Counter Value
+	AT91_REG	 TC_RA; 	// Register A
+	AT91_REG	 TC_RB; 	// Register B
+	AT91_REG	 TC_RC; 	// Register C
+	AT91_REG	 TC_SR; 	// Status Register
+	AT91_REG	 TC_IER; 	// Interrupt Enable Register
+	AT91_REG	 TC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 TC_IMR; 	// Interrupt Mask Register
+} AT91S_TC, *AT91PS_TC;
+
+// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- 
+#define AT91C_TC_CLKEN        ((unsigned int) 0x1 <<  0) // (TC) Counter Clock Enable Command
+#define AT91C_TC_CLKDIS       ((unsigned int) 0x1 <<  1) // (TC) Counter Clock Disable Command
+#define AT91C_TC_SWTRG        ((unsigned int) 0x1 <<  2) // (TC) Software Trigger Command
+// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- 
+#define AT91C_TC_CPCSTOP      ((unsigned int) 0x1 <<  6) // (TC) Counter Clock Stopped with RC Compare
+#define AT91C_TC_CPCDIS       ((unsigned int) 0x1 <<  7) // (TC) Counter Clock Disable with RC Compare
+#define AT91C_TC_EEVTEDG      ((unsigned int) 0x3 <<  8) // (TC) External Event Edge Selection
+#define 	AT91C_TC_EEVTEDG_NONE                 ((unsigned int) 0x0 <<  8) // (TC) Edge: None
+#define 	AT91C_TC_EEVTEDG_RISING               ((unsigned int) 0x1 <<  8) // (TC) Edge: rising edge
+#define 	AT91C_TC_EEVTEDG_FALLING              ((unsigned int) 0x2 <<  8) // (TC) Edge: falling edge
+#define 	AT91C_TC_EEVTEDG_BOTH                 ((unsigned int) 0x3 <<  8) // (TC) Edge: each edge
+#define AT91C_TC_EEVT         ((unsigned int) 0x3 << 10) // (TC) External Event  Selection
+#define 	AT91C_TC_EEVT_NONE                 ((unsigned int) 0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input
+#define 	AT91C_TC_EEVT_RISING               ((unsigned int) 0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output
+#define 	AT91C_TC_EEVT_FALLING              ((unsigned int) 0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output
+#define 	AT91C_TC_EEVT_BOTH                 ((unsigned int) 0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output
+#define AT91C_TC_ENETRG       ((unsigned int) 0x1 << 12) // (TC) External Event Trigger enable
+#define AT91C_TC_WAVESEL      ((unsigned int) 0x3 << 13) // (TC) Waveform  Selection
+#define 	AT91C_TC_WAVESEL_UP                   ((unsigned int) 0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UPDOWN               ((unsigned int) 0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UP_AUTO              ((unsigned int) 0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UPDOWN_AUTO          ((unsigned int) 0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare
+#define AT91C_TC_CPCTRG       ((unsigned int) 0x1 << 14) // (TC) RC Compare Trigger Enable
+#define AT91C_TC_WAVE         ((unsigned int) 0x1 << 15) // (TC) 
+#define AT91C_TC_ACPA         ((unsigned int) 0x3 << 16) // (TC) RA Compare Effect on TIOA
+#define 	AT91C_TC_ACPA_NONE                 ((unsigned int) 0x0 << 16) // (TC) Effect: none
+#define 	AT91C_TC_ACPA_SET                  ((unsigned int) 0x1 << 16) // (TC) Effect: set
+#define 	AT91C_TC_ACPA_CLEAR                ((unsigned int) 0x2 << 16) // (TC) Effect: clear
+#define 	AT91C_TC_ACPA_TOGGLE               ((unsigned int) 0x3 << 16) // (TC) Effect: toggle
+#define AT91C_TC_ACPC         ((unsigned int) 0x3 << 18) // (TC) RC Compare Effect on TIOA
+#define 	AT91C_TC_ACPC_NONE                 ((unsigned int) 0x0 << 18) // (TC) Effect: none
+#define 	AT91C_TC_ACPC_SET                  ((unsigned int) 0x1 << 18) // (TC) Effect: set
+#define 	AT91C_TC_ACPC_CLEAR                ((unsigned int) 0x2 << 18) // (TC) Effect: clear
+#define 	AT91C_TC_ACPC_TOGGLE               ((unsigned int) 0x3 << 18) // (TC) Effect: toggle
+#define AT91C_TC_AEEVT        ((unsigned int) 0x3 << 20) // (TC) External Event Effect on TIOA
+#define 	AT91C_TC_AEEVT_NONE                 ((unsigned int) 0x0 << 20) // (TC) Effect: none
+#define 	AT91C_TC_AEEVT_SET                  ((unsigned int) 0x1 << 20) // (TC) Effect: set
+#define 	AT91C_TC_AEEVT_CLEAR                ((unsigned int) 0x2 << 20) // (TC) Effect: clear
+#define 	AT91C_TC_AEEVT_TOGGLE               ((unsigned int) 0x3 << 20) // (TC) Effect: toggle
+#define AT91C_TC_ASWTRG       ((unsigned int) 0x3 << 22) // (TC) Software Trigger Effect on TIOA
+#define 	AT91C_TC_ASWTRG_NONE                 ((unsigned int) 0x0 << 22) // (TC) Effect: none
+#define 	AT91C_TC_ASWTRG_SET                  ((unsigned int) 0x1 << 22) // (TC) Effect: set
+#define 	AT91C_TC_ASWTRG_CLEAR                ((unsigned int) 0x2 << 22) // (TC) Effect: clear
+#define 	AT91C_TC_ASWTRG_TOGGLE               ((unsigned int) 0x3 << 22) // (TC) Effect: toggle
+#define AT91C_TC_BCPB         ((unsigned int) 0x3 << 24) // (TC) RB Compare Effect on TIOB
+#define 	AT91C_TC_BCPB_NONE                 ((unsigned int) 0x0 << 24) // (TC) Effect: none
+#define 	AT91C_TC_BCPB_SET                  ((unsigned int) 0x1 << 24) // (TC) Effect: set
+#define 	AT91C_TC_BCPB_CLEAR                ((unsigned int) 0x2 << 24) // (TC) Effect: clear
+#define 	AT91C_TC_BCPB_TOGGLE               ((unsigned int) 0x3 << 24) // (TC) Effect: toggle
+#define AT91C_TC_BCPC         ((unsigned int) 0x3 << 26) // (TC) RC Compare Effect on TIOB
+#define 	AT91C_TC_BCPC_NONE                 ((unsigned int) 0x0 << 26) // (TC) Effect: none
+#define 	AT91C_TC_BCPC_SET                  ((unsigned int) 0x1 << 26) // (TC) Effect: set
+#define 	AT91C_TC_BCPC_CLEAR                ((unsigned int) 0x2 << 26) // (TC) Effect: clear
+#define 	AT91C_TC_BCPC_TOGGLE               ((unsigned int) 0x3 << 26) // (TC) Effect: toggle
+#define AT91C_TC_BEEVT        ((unsigned int) 0x3 << 28) // (TC) External Event Effect on TIOB
+#define 	AT91C_TC_BEEVT_NONE                 ((unsigned int) 0x0 << 28) // (TC) Effect: none
+#define 	AT91C_TC_BEEVT_SET                  ((unsigned int) 0x1 << 28) // (TC) Effect: set
+#define 	AT91C_TC_BEEVT_CLEAR                ((unsigned int) 0x2 << 28) // (TC) Effect: clear
+#define 	AT91C_TC_BEEVT_TOGGLE               ((unsigned int) 0x3 << 28) // (TC) Effect: toggle
+#define AT91C_TC_BSWTRG       ((unsigned int) 0x3 << 30) // (TC) Software Trigger Effect on TIOB
+#define 	AT91C_TC_BSWTRG_NONE                 ((unsigned int) 0x0 << 30) // (TC) Effect: none
+#define 	AT91C_TC_BSWTRG_SET                  ((unsigned int) 0x1 << 30) // (TC) Effect: set
+#define 	AT91C_TC_BSWTRG_CLEAR                ((unsigned int) 0x2 << 30) // (TC) Effect: clear
+#define 	AT91C_TC_BSWTRG_TOGGLE               ((unsigned int) 0x3 << 30) // (TC) Effect: toggle
+// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- 
+#define AT91C_TC_COVFS        ((unsigned int) 0x1 <<  0) // (TC) Counter Overflow
+#define AT91C_TC_LOVRS        ((unsigned int) 0x1 <<  1) // (TC) Load Overrun
+#define AT91C_TC_CPAS         ((unsigned int) 0x1 <<  2) // (TC) RA Compare
+#define AT91C_TC_CPBS         ((unsigned int) 0x1 <<  3) // (TC) RB Compare
+#define AT91C_TC_CPCS         ((unsigned int) 0x1 <<  4) // (TC) RC Compare
+#define AT91C_TC_LDRAS        ((unsigned int) 0x1 <<  5) // (TC) RA Loading
+#define AT91C_TC_LDRBS        ((unsigned int) 0x1 <<  6) // (TC) RB Loading
+#define AT91C_TC_ETRCS        ((unsigned int) 0x1 <<  7) // (TC) External Trigger
+#define AT91C_TC_ETRGS        ((unsigned int) 0x1 << 16) // (TC) Clock Enabling
+#define AT91C_TC_MTIOA        ((unsigned int) 0x1 << 17) // (TC) TIOA Mirror
+#define AT91C_TC_MTIOB        ((unsigned int) 0x1 << 18) // (TC) TIOA Mirror
+// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- 
+// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- 
+// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Timer Counter Interface
+// *****************************************************************************
+typedef struct _AT91S_TCB {
+	AT91S_TC	 TCB_TC0; 	// TC Channel 0
+	AT91_REG	 Reserved0[4]; 	// 
+	AT91S_TC	 TCB_TC1; 	// TC Channel 1
+	AT91_REG	 Reserved1[4]; 	// 
+	AT91S_TC	 TCB_TC2; 	// TC Channel 2
+	AT91_REG	 Reserved2[4]; 	// 
+	AT91_REG	 TCB_BCR; 	// TC Block Control Register
+	AT91_REG	 TCB_BMR; 	// TC Block Mode Register
+} AT91S_TCB, *AT91PS_TCB;
+
+// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- 
+#define AT91C_TCB_SYNC        ((unsigned int) 0x1 <<  0) // (TCB) Synchro Command
+// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- 
+#define AT91C_TCB_TC0XC0S     ((unsigned int) 0x1 <<  0) // (TCB) External Clock Signal 0 Selection
+#define 	AT91C_TCB_TC0XC0S_TCLK0                ((unsigned int) 0x0) // (TCB) TCLK0 connected to XC0
+#define 	AT91C_TCB_TC0XC0S_NONE                 ((unsigned int) 0x1) // (TCB) None signal connected to XC0
+#define 	AT91C_TCB_TC0XC0S_TIOA1                ((unsigned int) 0x2) // (TCB) TIOA1 connected to XC0
+#define 	AT91C_TCB_TC0XC0S_TIOA2                ((unsigned int) 0x3) // (TCB) TIOA2 connected to XC0
+#define AT91C_TCB_TC1XC1S     ((unsigned int) 0x1 <<  2) // (TCB) External Clock Signal 1 Selection
+#define 	AT91C_TCB_TC1XC1S_TCLK1                ((unsigned int) 0x0 <<  2) // (TCB) TCLK1 connected to XC1
+#define 	AT91C_TCB_TC1XC1S_NONE                 ((unsigned int) 0x1 <<  2) // (TCB) None signal connected to XC1
+#define 	AT91C_TCB_TC1XC1S_TIOA0                ((unsigned int) 0x2 <<  2) // (TCB) TIOA0 connected to XC1
+#define 	AT91C_TCB_TC1XC1S_TIOA2                ((unsigned int) 0x3 <<  2) // (TCB) TIOA2 connected to XC1
+#define AT91C_TCB_TC2XC2S     ((unsigned int) 0x1 <<  4) // (TCB) External Clock Signal 2 Selection
+#define 	AT91C_TCB_TC2XC2S_TCLK2                ((unsigned int) 0x0 <<  4) // (TCB) TCLK2 connected to XC2
+#define 	AT91C_TCB_TC2XC2S_NONE                 ((unsigned int) 0x1 <<  4) // (TCB) None signal connected to XC2
+#define 	AT91C_TCB_TC2XC2S_TIOA0                ((unsigned int) 0x2 <<  4) // (TCB) TIOA0 connected to XC2
+#define 	AT91C_TCB_TC2XC2S_TIOA2                ((unsigned int) 0x3 <<  4) // (TCB) TIOA2 connected to XC2
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR USB Host Interface
+// *****************************************************************************
+typedef struct _AT91S_UHP {
+	AT91_REG	 UHP_HcRevision; 	// Revision
+	AT91_REG	 UHP_HcControl; 	// Operating modes for the Host Controller
+	AT91_REG	 UHP_HcCommandStatus; 	// Command & status Register
+	AT91_REG	 UHP_HcInterruptStatus; 	// Interrupt Status Register
+	AT91_REG	 UHP_HcInterruptEnable; 	// Interrupt Enable Register
+	AT91_REG	 UHP_HcInterruptDisable; 	// Interrupt Disable Register
+	AT91_REG	 UHP_HcHCCA; 	// Pointer to the Host Controller Communication Area
+	AT91_REG	 UHP_HcPeriodCurrentED; 	// Current Isochronous or Interrupt Endpoint Descriptor
+	AT91_REG	 UHP_HcControlHeadED; 	// First Endpoint Descriptor of the Control list
+	AT91_REG	 UHP_HcControlCurrentED; 	// Endpoint Control and Status Register
+	AT91_REG	 UHP_HcBulkHeadED; 	// First endpoint register of the Bulk list
+	AT91_REG	 UHP_HcBulkCurrentED; 	// Current endpoint of the Bulk list
+	AT91_REG	 UHP_HcBulkDoneHead; 	// Last completed transfer descriptor
+	AT91_REG	 UHP_HcFmInterval; 	// Bit time between 2 consecutive SOFs
+	AT91_REG	 UHP_HcFmRemaining; 	// Bit time remaining in the current Frame
+	AT91_REG	 UHP_HcFmNumber; 	// Frame number
+	AT91_REG	 UHP_HcPeriodicStart; 	// Periodic Start
+	AT91_REG	 UHP_HcLSThreshold; 	// LS Threshold
+	AT91_REG	 UHP_HcRhDescriptorA; 	// Root Hub characteristics A
+	AT91_REG	 UHP_HcRhDescriptorB; 	// Root Hub characteristics B
+	AT91_REG	 UHP_HcRhStatus; 	// Root Hub Status register
+	AT91_REG	 UHP_HcRhPortStatus[2]; 	// Root Hub Port Status Register
+} AT91S_UHP, *AT91PS_UHP;
+
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Ethernet MAC
+// *****************************************************************************
+typedef struct _AT91S_EMAC {
+	AT91_REG	 EMAC_CTL; 	// Network Control Register
+	AT91_REG	 EMAC_CFG; 	// Network Configuration Register
+	AT91_REG	 EMAC_SR; 	// Network Status Register
+	AT91_REG	 EMAC_TAR; 	// Transmit Address Register
+	AT91_REG	 EMAC_TCR; 	// Transmit Control Register
+	AT91_REG	 EMAC_TSR; 	// Transmit Status Register
+	AT91_REG	 EMAC_RBQP; 	// Receive Buffer Queue Pointer
+	AT91_REG	 Reserved0[1]; 	// 
+	AT91_REG	 EMAC_RSR; 	// Receive Status Register
+	AT91_REG	 EMAC_ISR; 	// Interrupt Status Register
+	AT91_REG	 EMAC_IER; 	// Interrupt Enable Register
+	AT91_REG	 EMAC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 EMAC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 EMAC_MAN; 	// PHY Maintenance Register
+	AT91_REG	 Reserved1[2]; 	// 
+	AT91_REG	 EMAC_FRA; 	// Frames Transmitted OK Register
+	AT91_REG	 EMAC_SCOL; 	// Single Collision Frame Register
+	AT91_REG	 EMAC_MCOL; 	// Multiple Collision Frame Register
+	AT91_REG	 EMAC_OK; 	// Frames Received OK Register
+	AT91_REG	 EMAC_SEQE; 	// Frame Check Sequence Error Register
+	AT91_REG	 EMAC_ALE; 	// Alignment Error Register
+	AT91_REG	 EMAC_DTE; 	// Deferred Transmission Frame Register
+	AT91_REG	 EMAC_LCOL; 	// Late Collision Register
+	AT91_REG	 EMAC_ECOL; 	// Excessive Collision Register
+	AT91_REG	 EMAC_CSE; 	// Carrier Sense Error Register
+	AT91_REG	 EMAC_TUE; 	// Transmit Underrun Error Register
+	AT91_REG	 EMAC_CDE; 	// Code Error Register
+	AT91_REG	 EMAC_ELR; 	// Excessive Length Error Register
+	AT91_REG	 EMAC_RJB; 	// Receive Jabber Register
+	AT91_REG	 EMAC_USF; 	// Undersize Frame Register
+	AT91_REG	 EMAC_SQEE; 	// SQE Test Error Register
+	AT91_REG	 EMAC_DRFC; 	// Discarded RX Frame Register
+	AT91_REG	 Reserved2[3]; 	// 
+	AT91_REG	 EMAC_HSH; 	// Hash Address High[63:32]
+	AT91_REG	 EMAC_HSL; 	// Hash Address Low[31:0]
+	AT91_REG	 EMAC_SA1L; 	// Specific Address 1 Low, First 4 bytes
+	AT91_REG	 EMAC_SA1H; 	// Specific Address 1 High, Last 2 bytes
+	AT91_REG	 EMAC_SA2L; 	// Specific Address 2 Low, First 4 bytes
+	AT91_REG	 EMAC_SA2H; 	// Specific Address 2 High, Last 2 bytes
+	AT91_REG	 EMAC_SA3L; 	// Specific Address 3 Low, First 4 bytes
+	AT91_REG	 EMAC_SA3H; 	// Specific Address 3 High, Last 2 bytes
+	AT91_REG	 EMAC_SA4L; 	// Specific Address 4 Low, First 4 bytes
+	AT91_REG	 EMAC_SA4H; 	// Specific Address 4 High, Last 2 bytesr
+} AT91S_EMAC, *AT91PS_EMAC;
+
+// -------- EMAC_CTL : (EMAC Offset: 0x0)  -------- 
+#define AT91C_EMAC_LB         ((unsigned int) 0x1 <<  0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level.
+#define AT91C_EMAC_LBL        ((unsigned int) 0x1 <<  1) // (EMAC) Loopback local. 
+#define AT91C_EMAC_RE         ((unsigned int) 0x1 <<  2) // (EMAC) Receive enable. 
+#define AT91C_EMAC_TE         ((unsigned int) 0x1 <<  3) // (EMAC) Transmit enable. 
+#define AT91C_EMAC_MPE        ((unsigned int) 0x1 <<  4) // (EMAC) Management port enable. 
+#define AT91C_EMAC_CSR        ((unsigned int) 0x1 <<  5) // (EMAC) Clear statistics registers. 
+#define AT91C_EMAC_ISR        ((unsigned int) 0x1 <<  6) // (EMAC) Increment statistics registers. 
+#define AT91C_EMAC_WES        ((unsigned int) 0x1 <<  7) // (EMAC) Write enable for statistics registers. 
+#define AT91C_EMAC_BP         ((unsigned int) 0x1 <<  8) // (EMAC) Back pressure. 
+// -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- 
+#define AT91C_EMAC_SPD        ((unsigned int) 0x1 <<  0) // (EMAC) Speed. 
+#define AT91C_EMAC_FD         ((unsigned int) 0x1 <<  1) // (EMAC) Full duplex. 
+#define AT91C_EMAC_BR         ((unsigned int) 0x1 <<  2) // (EMAC) Bit rate. 
+#define AT91C_EMAC_CAF        ((unsigned int) 0x1 <<  4) // (EMAC) Copy all frames. 
+#define AT91C_EMAC_NBC        ((unsigned int) 0x1 <<  5) // (EMAC) No broadcast. 
+#define AT91C_EMAC_MTI        ((unsigned int) 0x1 <<  6) // (EMAC) Multicast hash enable
+#define AT91C_EMAC_UNI        ((unsigned int) 0x1 <<  7) // (EMAC) Unicast hash enable. 
+#define AT91C_EMAC_BIG        ((unsigned int) 0x1 <<  8) // (EMAC) Receive 1522 bytes. 
+#define AT91C_EMAC_EAE        ((unsigned int) 0x1 <<  9) // (EMAC) External address match enable. 
+#define AT91C_EMAC_CLK        ((unsigned int) 0x3 << 10) // (EMAC) 
+#define 	AT91C_EMAC_CLK_HCLK_8               ((unsigned int) 0x0 << 10) // (EMAC) HCLK divided by 8
+#define 	AT91C_EMAC_CLK_HCLK_16              ((unsigned int) 0x1 << 10) // (EMAC) HCLK divided by 16
+#define 	AT91C_EMAC_CLK_HCLK_32              ((unsigned int) 0x2 << 10) // (EMAC) HCLK divided by 32
+#define 	AT91C_EMAC_CLK_HCLK_64              ((unsigned int) 0x3 << 10) // (EMAC) HCLK divided by 64
+#define AT91C_EMAC_RTY        ((unsigned int) 0x1 << 12) // (EMAC) 
+#define AT91C_EMAC_RMII       ((unsigned int) 0x1 << 13) // (EMAC) 
+// -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- 
+#define AT91C_EMAC_MDIO       ((unsigned int) 0x1 <<  1) // (EMAC) 
+#define AT91C_EMAC_IDLE       ((unsigned int) 0x1 <<  2) // (EMAC) 
+// -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- 
+#define AT91C_EMAC_LEN        ((unsigned int) 0x7FF <<  0) // (EMAC) 
+#define AT91C_EMAC_NCRC       ((unsigned int) 0x1 << 15) // (EMAC) 
+// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- 
+#define AT91C_EMAC_OVR        ((unsigned int) 0x1 <<  0) // (EMAC) 
+#define AT91C_EMAC_COL        ((unsigned int) 0x1 <<  1) // (EMAC) 
+#define AT91C_EMAC_RLE        ((unsigned int) 0x1 <<  2) // (EMAC) 
+#define AT91C_EMAC_TXIDLE     ((unsigned int) 0x1 <<  3) // (EMAC) 
+#define AT91C_EMAC_BNQ        ((unsigned int) 0x1 <<  4) // (EMAC) 
+#define AT91C_EMAC_COMP       ((unsigned int) 0x1 <<  5) // (EMAC) 
+#define AT91C_EMAC_UND        ((unsigned int) 0x1 <<  6) // (EMAC) 
+// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- 
+#define AT91C_EMAC_BNA        ((unsigned int) 0x1 <<  0) // (EMAC) 
+#define AT91C_EMAC_REC        ((unsigned int) 0x1 <<  1) // (EMAC) 
+// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- 
+#define AT91C_EMAC_DONE       ((unsigned int) 0x1 <<  0) // (EMAC) 
+#define AT91C_EMAC_RCOM       ((unsigned int) 0x1 <<  1) // (EMAC) 
+#define AT91C_EMAC_RBNA       ((unsigned int) 0x1 <<  2) // (EMAC) 
+#define AT91C_EMAC_TOVR       ((unsigned int) 0x1 <<  3) // (EMAC) 
+#define AT91C_EMAC_TUND       ((unsigned int) 0x1 <<  4) // (EMAC) 
+#define AT91C_EMAC_RTRY       ((unsigned int) 0x1 <<  5) // (EMAC) 
+#define AT91C_EMAC_TBRE       ((unsigned int) 0x1 <<  6) // (EMAC) 
+#define AT91C_EMAC_TCOM       ((unsigned int) 0x1 <<  7) // (EMAC) 
+#define AT91C_EMAC_TIDLE      ((unsigned int) 0x1 <<  8) // (EMAC) 
+#define AT91C_EMAC_LINK       ((unsigned int) 0x1 <<  9) // (EMAC) 
+#define AT91C_EMAC_ROVR       ((unsigned int) 0x1 << 10) // (EMAC) 
+#define AT91C_EMAC_HRESP      ((unsigned int) 0x1 << 11) // (EMAC) 
+// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- 
+// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- 
+// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- 
+// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- 
+#define AT91C_EMAC_DATA       ((unsigned int) 0xFFFF <<  0) // (EMAC) 
+#define AT91C_EMAC_CODE       ((unsigned int) 0x3 << 16) // (EMAC) 
+#define AT91C_EMAC_REGA       ((unsigned int) 0x1F << 18) // (EMAC) 
+#define AT91C_EMAC_PHYA       ((unsigned int) 0x1F << 23) // (EMAC) 
+#define AT91C_EMAC_RW         ((unsigned int) 0x3 << 28) // (EMAC) 
+#define AT91C_EMAC_HIGH       ((unsigned int) 0x1 << 30) // (EMAC) 
+#define AT91C_EMAC_LOW        ((unsigned int) 0x1 << 31) // (EMAC) 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR External Bus Interface
+// *****************************************************************************
+typedef struct _AT91S_EBI {
+	AT91_REG	 EBI_CSA; 	// Chip Select Assignment Register
+	AT91_REG	 EBI_CFGR; 	// Configuration Register
+} AT91S_EBI, *AT91PS_EBI;
+
+// -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- 
+#define AT91C_EBI_CS0A        ((unsigned int) 0x1 <<  0) // (EBI) Chip Select 0 Assignment
+#define 	AT91C_EBI_CS0A_SMC                  ((unsigned int) 0x0) // (EBI) Chip Select 0 is assigned to the Static Memory Controller.
+#define 	AT91C_EBI_CS0A_BFC                  ((unsigned int) 0x1) // (EBI) Chip Select 0 is assigned to the Burst Flash Controller.
+#define AT91C_EBI_CS1A        ((unsigned int) 0x1 <<  1) // (EBI) Chip Select 1 Assignment
+#define 	AT91C_EBI_CS1A_SMC                  ((unsigned int) 0x0 <<  1) // (EBI) Chip Select 1 is assigned to the Static Memory Controller.
+#define 	AT91C_EBI_CS1A_SDRAMC               ((unsigned int) 0x1 <<  1) // (EBI) Chip Select 1 is assigned to the SDRAM Controller.
+#define AT91C_EBI_CS3A        ((unsigned int) 0x1 <<  3) // (EBI) Chip Select 3 Assignment
+#define 	AT91C_EBI_CS3A_SMC                  ((unsigned int) 0x0 <<  3) // (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2.
+#define 	AT91C_EBI_CS3A_SMC_SmartMedia       ((unsigned int) 0x1 <<  3) // (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated.
+#define AT91C_EBI_CS4A        ((unsigned int) 0x1 <<  4) // (EBI) Chip Select 4 Assignment
+#define 	AT91C_EBI_CS4A_SMC                  ((unsigned int) 0x0 <<  4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2.
+#define 	AT91C_EBI_CS4A_SMC_CompactFlash     ((unsigned int) 0x1 <<  4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated.
+// -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- 
+#define AT91C_EBI_DBPUC       ((unsigned int) 0x1 <<  0) // (EBI) Data Bus Pull-Up Configuration
+#define AT91C_EBI_EBSEN       ((unsigned int) 0x1 <<  1) // (EBI) Bus Sharing Enable
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Static Memory Controller 2 Interface
+// *****************************************************************************
+typedef struct _AT91S_SMC2 {
+	AT91_REG	 SMC2_CSR[8]; 	// SMC2 Chip Select Register
+} AT91S_SMC2, *AT91PS_SMC2;
+
+// -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- 
+#define AT91C_SMC2_NWS        ((unsigned int) 0x7F <<  0) // (SMC2) Number of Wait States
+#define AT91C_SMC2_WSEN       ((unsigned int) 0x1 <<  7) // (SMC2) Wait State Enable
+#define AT91C_SMC2_TDF        ((unsigned int) 0xF <<  8) // (SMC2) Data Float Time
+#define AT91C_SMC2_BAT        ((unsigned int) 0x1 << 12) // (SMC2) Byte Access Type
+#define AT91C_SMC2_DBW        ((unsigned int) 0x1 << 13) // (SMC2) Data Bus Width
+#define 	AT91C_SMC2_DBW_16                   ((unsigned int) 0x1 << 13) // (SMC2) 16-bit.
+#define 	AT91C_SMC2_DBW_8                    ((unsigned int) 0x2 << 13) // (SMC2) 8-bit.
+#define AT91C_SMC2_DRP        ((unsigned int) 0x1 << 15) // (SMC2) Data Read Protocol
+#define AT91C_SMC2_ACSS       ((unsigned int) 0x3 << 16) // (SMC2) Address to Chip Select Setup
+#define 	AT91C_SMC2_ACSS_STANDARD             ((unsigned int) 0x0 << 16) // (SMC2) Standard, asserted at the beginning of the access and deasserted at the end.
+#define 	AT91C_SMC2_ACSS_1_CYCLE              ((unsigned int) 0x1 << 16) // (SMC2) One cycle less at the beginning and the end of the access.
+#define 	AT91C_SMC2_ACSS_2_CYCLES             ((unsigned int) 0x2 << 16) // (SMC2) Two cycles less at the beginning and the end of the access.
+#define 	AT91C_SMC2_ACSS_3_CYCLES             ((unsigned int) 0x3 << 16) // (SMC2) Three cycles less at the beginning and the end of the access.
+#define AT91C_SMC2_RWSETUP    ((unsigned int) 0x7 << 24) // (SMC2) Read and Write Signal Setup Time
+#define AT91C_SMC2_RWHOLD     ((unsigned int) 0x7 << 29) // (SMC2) Read and Write Signal Hold Time
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR SDRAM Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_SDRC {
+	AT91_REG	 SDRC_MR; 	// SDRAM Controller Mode Register
+	AT91_REG	 SDRC_TR; 	// SDRAM Controller Refresh Timer Register
+	AT91_REG	 SDRC_CR; 	// SDRAM Controller Configuration Register
+	AT91_REG	 SDRC_SRR; 	// SDRAM Controller Self Refresh Register
+	AT91_REG	 SDRC_LPR; 	// SDRAM Controller Low Power Register
+	AT91_REG	 SDRC_IER; 	// SDRAM Controller Interrupt Enable Register
+	AT91_REG	 SDRC_IDR; 	// SDRAM Controller Interrupt Disable Register
+	AT91_REG	 SDRC_IMR; 	// SDRAM Controller Interrupt Mask Register
+	AT91_REG	 SDRC_ISR; 	// SDRAM Controller Interrupt Mask Register
+} AT91S_SDRC, *AT91PS_SDRC;
+
+// -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- 
+#define AT91C_SDRC_MODE       ((unsigned int) 0xF <<  0) // (SDRC) Mode
+#define 	AT91C_SDRC_MODE_NORMAL_CMD           ((unsigned int) 0x0) // (SDRC) Normal Mode
+#define 	AT91C_SDRC_MODE_NOP_CMD              ((unsigned int) 0x1) // (SDRC) NOP Command
+#define 	AT91C_SDRC_MODE_PRCGALL_CMD          ((unsigned int) 0x2) // (SDRC) All Banks Precharge Command
+#define 	AT91C_SDRC_MODE_LMR_CMD              ((unsigned int) 0x3) // (SDRC) Load Mode Register Command
+#define 	AT91C_SDRC_MODE_RFSH_CMD             ((unsigned int) 0x4) // (SDRC) Refresh Command
+#define AT91C_SDRC_DBW        ((unsigned int) 0x1 <<  4) // (SDRC) Data Bus Width
+#define 	AT91C_SDRC_DBW_32_BITS              ((unsigned int) 0x0 <<  4) // (SDRC) 32 Bits datas bus
+#define 	AT91C_SDRC_DBW_16_BITS              ((unsigned int) 0x1 <<  4) // (SDRC) 16 Bits datas bus
+// -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- 
+#define AT91C_SDRC_COUNT      ((unsigned int) 0xFFF <<  0) // (SDRC) Refresh Counter
+// -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- 
+#define AT91C_SDRC_NC         ((unsigned int) 0x3 <<  0) // (SDRC) Number of Column Bits
+#define 	AT91C_SDRC_NC_8                    ((unsigned int) 0x0) // (SDRC) 8 Bits
+#define 	AT91C_SDRC_NC_9                    ((unsigned int) 0x1) // (SDRC) 9 Bits
+#define 	AT91C_SDRC_NC_10                   ((unsigned int) 0x2) // (SDRC) 10 Bits
+#define 	AT91C_SDRC_NC_11                   ((unsigned int) 0x3) // (SDRC) 11 Bits
+#define AT91C_SDRC_NR         ((unsigned int) 0x3 <<  2) // (SDRC) Number of Row Bits
+#define 	AT91C_SDRC_NR_11                   ((unsigned int) 0x0 <<  2) // (SDRC) 11 Bits
+#define 	AT91C_SDRC_NR_12                   ((unsigned int) 0x1 <<  2) // (SDRC) 12 Bits
+#define 	AT91C_SDRC_NR_13                   ((unsigned int) 0x2 <<  2) // (SDRC) 13 Bits
+#define AT91C_SDRC_NB         ((unsigned int) 0x1 <<  4) // (SDRC) Number of Banks
+#define 	AT91C_SDRC_NB_2_BANKS              ((unsigned int) 0x0 <<  4) // (SDRC) 2 banks
+#define 	AT91C_SDRC_NB_4_BANKS              ((unsigned int) 0x1 <<  4) // (SDRC) 4 banks
+#define AT91C_SDRC_CAS        ((unsigned int) 0x3 <<  5) // (SDRC) CAS Latency
+#define 	AT91C_SDRC_CAS_2                    ((unsigned int) 0x2 <<  5) // (SDRC) 2 cycles
+#define AT91C_SDRC_TWR        ((unsigned int) 0xF <<  7) // (SDRC) Number of Write Recovery Time Cycles
+#define AT91C_SDRC_TRC        ((unsigned int) 0xF << 11) // (SDRC) Number of RAS Cycle Time Cycles
+#define AT91C_SDRC_TRP        ((unsigned int) 0xF << 15) // (SDRC) Number of RAS Precharge Time Cycles
+#define AT91C_SDRC_TRCD       ((unsigned int) 0xF << 19) // (SDRC) Number of RAS to CAS Delay Cycles
+#define AT91C_SDRC_TRAS       ((unsigned int) 0xF << 23) // (SDRC) Number of RAS Active Time Cycles
+#define AT91C_SDRC_TXSR       ((unsigned int) 0xF << 27) // (SDRC) Number of Command Recovery Time Cycles
+// -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- 
+#define AT91C_SDRC_SRCB       ((unsigned int) 0x1 <<  0) // (SDRC) Self-refresh Command Bit
+// -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- 
+#define AT91C_SDRC_LPCB       ((unsigned int) 0x1 <<  0) // (SDRC) Low-power Command Bit
+// -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- 
+#define AT91C_SDRC_RES        ((unsigned int) 0x1 <<  0) // (SDRC) Refresh Error Status
+// -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- 
+// -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- 
+// -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Burst Flash Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_BFC {
+	AT91_REG	 BFC_MR; 	// BFC Mode Register
+} AT91S_BFC, *AT91PS_BFC;
+
+// -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- 
+#define AT91C_BFC_BFCOM       ((unsigned int) 0x3 <<  0) // (BFC) Burst Flash Controller Operating Mode
+#define 	AT91C_BFC_BFCOM_DISABLED             ((unsigned int) 0x0) // (BFC) NPCS0 is driven by the SMC or remains high.
+#define 	AT91C_BFC_BFCOM_ASYNC                ((unsigned int) 0x1) // (BFC) Asynchronous
+#define 	AT91C_BFC_BFCOM_BURST_READ           ((unsigned int) 0x2) // (BFC) Burst Read
+#define AT91C_BFC_BFCC        ((unsigned int) 0x3 <<  2) // (BFC) Burst Flash Controller Operating Mode
+#define 	AT91C_BFC_BFCC_MCK                  ((unsigned int) 0x1 <<  2) // (BFC) Master Clock.
+#define 	AT91C_BFC_BFCC_MCK_DIV_2            ((unsigned int) 0x2 <<  2) // (BFC) Master Clock divided by 2.
+#define 	AT91C_BFC_BFCC_MCK_DIV_4            ((unsigned int) 0x3 <<  2) // (BFC) Master Clock divided by 4.
+#define AT91C_BFC_AVL         ((unsigned int) 0xF <<  4) // (BFC) Address Valid Latency
+#define AT91C_BFC_PAGES       ((unsigned int) 0x7 <<  8) // (BFC) Page Size
+#define 	AT91C_BFC_PAGES_NO_PAGE              ((unsigned int) 0x0 <<  8) // (BFC) No page handling.
+#define 	AT91C_BFC_PAGES_16                   ((unsigned int) 0x1 <<  8) // (BFC) 16 bytes page size.
+#define 	AT91C_BFC_PAGES_32                   ((unsigned int) 0x2 <<  8) // (BFC) 32 bytes page size.
+#define 	AT91C_BFC_PAGES_64                   ((unsigned int) 0x3 <<  8) // (BFC) 64 bytes page size.
+#define 	AT91C_BFC_PAGES_128                  ((unsigned int) 0x4 <<  8) // (BFC) 128 bytes page size.
+#define 	AT91C_BFC_PAGES_256                  ((unsigned int) 0x5 <<  8) // (BFC) 256 bytes page size.
+#define 	AT91C_BFC_PAGES_512                  ((unsigned int) 0x6 <<  8) // (BFC) 512 bytes page size.
+#define 	AT91C_BFC_PAGES_1024                 ((unsigned int) 0x7 <<  8) // (BFC) 1024 bytes page size.
+#define AT91C_BFC_OEL         ((unsigned int) 0x3 << 12) // (BFC) Output Enable Latency
+#define AT91C_BFC_BAAEN       ((unsigned int) 0x1 << 16) // (BFC) Burst Address Advance Enable
+#define AT91C_BFC_BFOEH       ((unsigned int) 0x1 << 17) // (BFC) Burst Flash Output Enable Handling
+#define AT91C_BFC_MUXEN       ((unsigned int) 0x1 << 18) // (BFC) Multiplexed Bus Enable
+#define AT91C_BFC_RDYEN       ((unsigned int) 0x1 << 19) // (BFC) Ready Enable Mode
+
+// *****************************************************************************
+//               REGISTER ADDRESS DEFINITION FOR AT91RM9200
+// *****************************************************************************
+// ========== Register definition for SYS peripheral ========== 
+// ========== Register definition for MC peripheral ========== 
+#define AT91C_MC_PUER   ((AT91_REG *) 	0xFFFFFF54) // (MC) MC Protection Unit Enable Register
+#define AT91C_MC_ASR    ((AT91_REG *) 	0xFFFFFF04) // (MC) MC Abort Status Register
+#define AT91C_MC_PUP    ((AT91_REG *) 	0xFFFFFF50) // (MC) MC Protection Unit Peripherals
+#define AT91C_MC_PUIA   ((AT91_REG *) 	0xFFFFFF10) // (MC) MC Protection Unit Area
+#define AT91C_MC_AASR   ((AT91_REG *) 	0xFFFFFF08) // (MC) MC Abort Address Status Register
+#define AT91C_MC_RCR    ((AT91_REG *) 	0xFFFFFF00) // (MC) MC Remap Control Register
+// ========== Register definition for RTC peripheral ========== 
+#define AT91C_RTC_IMR   ((AT91_REG *) 	0xFFFFFE28) // (RTC) Interrupt Mask Register
+#define AT91C_RTC_IER   ((AT91_REG *) 	0xFFFFFE20) // (RTC) Interrupt Enable Register
+#define AT91C_RTC_SR    ((AT91_REG *) 	0xFFFFFE18) // (RTC) Status Register
+#define AT91C_RTC_TIMALR ((AT91_REG *) 	0xFFFFFE10) // (RTC) Time Alarm Register
+#define AT91C_RTC_TIMR  ((AT91_REG *) 	0xFFFFFE08) // (RTC) Time Register
+#define AT91C_RTC_CR    ((AT91_REG *) 	0xFFFFFE00) // (RTC) Control Register
+#define AT91C_RTC_VER   ((AT91_REG *) 	0xFFFFFE2C) // (RTC) Valid Entry Register
+#define AT91C_RTC_IDR   ((AT91_REG *) 	0xFFFFFE24) // (RTC) Interrupt Disable Register
+#define AT91C_RTC_SCCR  ((AT91_REG *) 	0xFFFFFE1C) // (RTC) Status Clear Command Register
+#define AT91C_RTC_CALALR ((AT91_REG *) 	0xFFFFFE14) // (RTC) Calendar Alarm Register
+#define AT91C_RTC_CALR  ((AT91_REG *) 	0xFFFFFE0C) // (RTC) Calendar Register
+#define AT91C_RTC_MR    ((AT91_REG *) 	0xFFFFFE04) // (RTC) Mode Register
+// ========== Register definition for ST peripheral ========== 
+#define AT91C_ST_CRTR   ((AT91_REG *) 	0xFFFFFD24) // (ST) Current Real-time Register
+#define AT91C_ST_IMR    ((AT91_REG *) 	0xFFFFFD1C) // (ST) Interrupt Mask Register
+#define AT91C_ST_IER    ((AT91_REG *) 	0xFFFFFD14) // (ST) Interrupt Enable Register
+#define AT91C_ST_RTMR   ((AT91_REG *) 	0xFFFFFD0C) // (ST) Real-time Mode Register
+#define AT91C_ST_PIMR   ((AT91_REG *) 	0xFFFFFD04) // (ST) Period Interval Mode Register
+#define AT91C_ST_RTAR   ((AT91_REG *) 	0xFFFFFD20) // (ST) Real-time Alarm Register
+#define AT91C_ST_IDR    ((AT91_REG *) 	0xFFFFFD18) // (ST) Interrupt Disable Register
+#define AT91C_ST_SR     ((AT91_REG *) 	0xFFFFFD10) // (ST) Status Register
+#define AT91C_ST_WDMR   ((AT91_REG *) 	0xFFFFFD08) // (ST) Watchdog Mode Register
+#define AT91C_ST_CR     ((AT91_REG *) 	0xFFFFFD00) // (ST) Control Register
+// ========== Register definition for PMC peripheral ========== 
+#define AT91C_PMC_SCSR  ((AT91_REG *) 	0xFFFFFC08) // (PMC) System Clock Status Register
+#define AT91C_PMC_SCER  ((AT91_REG *) 	0xFFFFFC00) // (PMC) System Clock Enable Register
+#define AT91C_PMC_IMR   ((AT91_REG *) 	0xFFFFFC6C) // (PMC) Interrupt Mask Register
+#define AT91C_PMC_IDR   ((AT91_REG *) 	0xFFFFFC64) // (PMC) Interrupt Disable Register
+#define AT91C_PMC_PCDR  ((AT91_REG *) 	0xFFFFFC14) // (PMC) Peripheral Clock Disable Register
+#define AT91C_PMC_SCDR  ((AT91_REG *) 	0xFFFFFC04) // (PMC) System Clock Disable Register
+#define AT91C_PMC_SR    ((AT91_REG *) 	0xFFFFFC68) // (PMC) Status Register
+#define AT91C_PMC_IER   ((AT91_REG *) 	0xFFFFFC60) // (PMC) Interrupt Enable Register
+#define AT91C_PMC_MCKR  ((AT91_REG *) 	0xFFFFFC30) // (PMC) Master Clock Register
+#define AT91C_PMC_PCER  ((AT91_REG *) 	0xFFFFFC10) // (PMC) Peripheral Clock Enable Register
+#define AT91C_PMC_PCSR  ((AT91_REG *) 	0xFFFFFC18) // (PMC) Peripheral Clock Status Register
+#define AT91C_PMC_PCKR  ((AT91_REG *) 	0xFFFFFC40) // (PMC) Programmable Clock Register
+// ========== Register definition for CKGR peripheral ========== 
+#define AT91C_CKGR_PLLBR ((AT91_REG *) 	0xFFFFFC2C) // (CKGR) PLL B Register
+#define AT91C_CKGR_MCFR ((AT91_REG *) 	0xFFFFFC24) // (CKGR) Main Clock  Frequency Register
+#define AT91C_CKGR_PLLAR ((AT91_REG *) 	0xFFFFFC28) // (CKGR) PLL A Register
+#define AT91C_CKGR_MOR  ((AT91_REG *) 	0xFFFFFC20) // (CKGR) Main Oscillator Register
+// ========== Register definition for PIOD peripheral ========== 
+#define AT91C_PIOD_PDSR ((AT91_REG *) 	0xFFFFFA3C) // (PIOD) Pin Data Status Register
+#define AT91C_PIOD_CODR ((AT91_REG *) 	0xFFFFFA34) // (PIOD) Clear Output Data Register
+#define AT91C_PIOD_OWER ((AT91_REG *) 	0xFFFFFAA0) // (PIOD) Output Write Enable Register
+#define AT91C_PIOD_MDER ((AT91_REG *) 	0xFFFFFA50) // (PIOD) Multi-driver Enable Register
+#define AT91C_PIOD_IMR  ((AT91_REG *) 	0xFFFFFA48) // (PIOD) Interrupt Mask Register
+#define AT91C_PIOD_IER  ((AT91_REG *) 	0xFFFFFA40) // (PIOD) Interrupt Enable Register
+#define AT91C_PIOD_ODSR ((AT91_REG *) 	0xFFFFFA38) // (PIOD) Output Data Status Register
+#define AT91C_PIOD_SODR ((AT91_REG *) 	0xFFFFFA30) // (PIOD) Set Output Data Register
+#define AT91C_PIOD_PER  ((AT91_REG *) 	0xFFFFFA00) // (PIOD) PIO Enable Register
+#define AT91C_PIOD_OWDR ((AT91_REG *) 	0xFFFFFAA4) // (PIOD) Output Write Disable Register
+#define AT91C_PIOD_PPUER ((AT91_REG *) 	0xFFFFFA64) // (PIOD) Pull-up Enable Register
+#define AT91C_PIOD_MDDR ((AT91_REG *) 	0xFFFFFA54) // (PIOD) Multi-driver Disable Register
+#define AT91C_PIOD_ISR  ((AT91_REG *) 	0xFFFFFA4C) // (PIOD) Interrupt Status Register
+#define AT91C_PIOD_IDR  ((AT91_REG *) 	0xFFFFFA44) // (PIOD) Interrupt Disable Register
+#define AT91C_PIOD_PDR  ((AT91_REG *) 	0xFFFFFA04) // (PIOD) PIO Disable Register
+#define AT91C_PIOD_ODR  ((AT91_REG *) 	0xFFFFFA14) // (PIOD) Output Disable Registerr
+#define AT91C_PIOD_OWSR ((AT91_REG *) 	0xFFFFFAA8) // (PIOD) Output Write Status Register
+#define AT91C_PIOD_ABSR ((AT91_REG *) 	0xFFFFFA78) // (PIOD) AB Select Status Register
+#define AT91C_PIOD_ASR  ((AT91_REG *) 	0xFFFFFA70) // (PIOD) Select A Register
+#define AT91C_PIOD_PPUSR ((AT91_REG *) 	0xFFFFFA68) // (PIOD) Pad Pull-up Status Register
+#define AT91C_PIOD_PPUDR ((AT91_REG *) 	0xFFFFFA60) // (PIOD) Pull-up Disable Register
+#define AT91C_PIOD_MDSR ((AT91_REG *) 	0xFFFFFA58) // (PIOD) Multi-driver Status Register
+#define AT91C_PIOD_PSR  ((AT91_REG *) 	0xFFFFFA08) // (PIOD) PIO Status Register
+#define AT91C_PIOD_OER  ((AT91_REG *) 	0xFFFFFA10) // (PIOD) Output Enable Register
+#define AT91C_PIOD_OSR  ((AT91_REG *) 	0xFFFFFA18) // (PIOD) Output Status Register
+#define AT91C_PIOD_IFER ((AT91_REG *) 	0xFFFFFA20) // (PIOD) Input Filter Enable Register
+#define AT91C_PIOD_BSR  ((AT91_REG *) 	0xFFFFFA74) // (PIOD) Select B Register
+#define AT91C_PIOD_IFDR ((AT91_REG *) 	0xFFFFFA24) // (PIOD) Input Filter Disable Register
+#define AT91C_PIOD_IFSR ((AT91_REG *) 	0xFFFFFA28) // (PIOD) Input Filter Status Register
+// ========== Register definition for PIOC peripheral ========== 
+#define AT91C_PIOC_IFDR ((AT91_REG *) 	0xFFFFF824) // (PIOC) Input Filter Disable Register
+#define AT91C_PIOC_ODR  ((AT91_REG *) 	0xFFFFF814) // (PIOC) Output Disable Registerr
+#define AT91C_PIOC_ABSR ((AT91_REG *) 	0xFFFFF878) // (PIOC) AB Select Status Register
+#define AT91C_PIOC_SODR ((AT91_REG *) 	0xFFFFF830) // (PIOC) Set Output Data Register
+#define AT91C_PIOC_IFSR ((AT91_REG *) 	0xFFFFF828) // (PIOC) Input Filter Status Register
+#define AT91C_PIOC_CODR ((AT91_REG *) 	0xFFFFF834) // (PIOC) Clear Output Data Register
+#define AT91C_PIOC_ODSR ((AT91_REG *) 	0xFFFFF838) // (PIOC) Output Data Status Register
+#define AT91C_PIOC_IER  ((AT91_REG *) 	0xFFFFF840) // (PIOC) Interrupt Enable Register
+#define AT91C_PIOC_IMR  ((AT91_REG *) 	0xFFFFF848) // (PIOC) Interrupt Mask Register
+#define AT91C_PIOC_OWDR ((AT91_REG *) 	0xFFFFF8A4) // (PIOC) Output Write Disable Register
+#define AT91C_PIOC_MDDR ((AT91_REG *) 	0xFFFFF854) // (PIOC) Multi-driver Disable Register
+#define AT91C_PIOC_PDSR ((AT91_REG *) 	0xFFFFF83C) // (PIOC) Pin Data Status Register
+#define AT91C_PIOC_IDR  ((AT91_REG *) 	0xFFFFF844) // (PIOC) Interrupt Disable Register
+#define AT91C_PIOC_ISR  ((AT91_REG *) 	0xFFFFF84C) // (PIOC) Interrupt Status Register
+#define AT91C_PIOC_PDR  ((AT91_REG *) 	0xFFFFF804) // (PIOC) PIO Disable Register
+#define AT91C_PIOC_OWSR ((AT91_REG *) 	0xFFFFF8A8) // (PIOC) Output Write Status Register
+#define AT91C_PIOC_OWER ((AT91_REG *) 	0xFFFFF8A0) // (PIOC) Output Write Enable Register
+#define AT91C_PIOC_ASR  ((AT91_REG *) 	0xFFFFF870) // (PIOC) Select A Register
+#define AT91C_PIOC_PPUSR ((AT91_REG *) 	0xFFFFF868) // (PIOC) Pad Pull-up Status Register
+#define AT91C_PIOC_PPUDR ((AT91_REG *) 	0xFFFFF860) // (PIOC) Pull-up Disable Register
+#define AT91C_PIOC_MDSR ((AT91_REG *) 	0xFFFFF858) // (PIOC) Multi-driver Status Register
+#define AT91C_PIOC_MDER ((AT91_REG *) 	0xFFFFF850) // (PIOC) Multi-driver Enable Register
+#define AT91C_PIOC_IFER ((AT91_REG *) 	0xFFFFF820) // (PIOC) Input Filter Enable Register
+#define AT91C_PIOC_OSR  ((AT91_REG *) 	0xFFFFF818) // (PIOC) Output Status Register
+#define AT91C_PIOC_OER  ((AT91_REG *) 	0xFFFFF810) // (PIOC) Output Enable Register
+#define AT91C_PIOC_PSR  ((AT91_REG *) 	0xFFFFF808) // (PIOC) PIO Status Register
+#define AT91C_PIOC_PER  ((AT91_REG *) 	0xFFFFF800) // (PIOC) PIO Enable Register
+#define AT91C_PIOC_BSR  ((AT91_REG *) 	0xFFFFF874) // (PIOC) Select B Register
+#define AT91C_PIOC_PPUER ((AT91_REG *) 	0xFFFFF864) // (PIOC) Pull-up Enable Register
+// ========== Register definition for PIOB peripheral ========== 
+#define AT91C_PIOB_OWSR ((AT91_REG *) 	0xFFFFF6A8) // (PIOB) Output Write Status Register
+#define AT91C_PIOB_PPUSR ((AT91_REG *) 	0xFFFFF668) // (PIOB) Pad Pull-up Status Register
+#define AT91C_PIOB_PPUDR ((AT91_REG *) 	0xFFFFF660) // (PIOB) Pull-up Disable Register
+#define AT91C_PIOB_MDSR ((AT91_REG *) 	0xFFFFF658) // (PIOB) Multi-driver Status Register
+#define AT91C_PIOB_MDER ((AT91_REG *) 	0xFFFFF650) // (PIOB) Multi-driver Enable Register
+#define AT91C_PIOB_IMR  ((AT91_REG *) 	0xFFFFF648) // (PIOB) Interrupt Mask Register
+#define AT91C_PIOB_OSR  ((AT91_REG *) 	0xFFFFF618) // (PIOB) Output Status Register
+#define AT91C_PIOB_OER  ((AT91_REG *) 	0xFFFFF610) // (PIOB) Output Enable Register
+#define AT91C_PIOB_PSR  ((AT91_REG *) 	0xFFFFF608) // (PIOB) PIO Status Register
+#define AT91C_PIOB_PER  ((AT91_REG *) 	0xFFFFF600) // (PIOB) PIO Enable Register
+#define AT91C_PIOB_BSR  ((AT91_REG *) 	0xFFFFF674) // (PIOB) Select B Register
+#define AT91C_PIOB_PPUER ((AT91_REG *) 	0xFFFFF664) // (PIOB) Pull-up Enable Register
+#define AT91C_PIOB_IFDR ((AT91_REG *) 	0xFFFFF624) // (PIOB) Input Filter Disable Register
+#define AT91C_PIOB_ODR  ((AT91_REG *) 	0xFFFFF614) // (PIOB) Output Disable Registerr
+#define AT91C_PIOB_ABSR ((AT91_REG *) 	0xFFFFF678) // (PIOB) AB Select Status Register
+#define AT91C_PIOB_ASR  ((AT91_REG *) 	0xFFFFF670) // (PIOB) Select A Register
+#define AT91C_PIOB_IFER ((AT91_REG *) 	0xFFFFF620) // (PIOB) Input Filter Enable Register
+#define AT91C_PIOB_IFSR ((AT91_REG *) 	0xFFFFF628) // (PIOB) Input Filter Status Register
+#define AT91C_PIOB_SODR ((AT91_REG *) 	0xFFFFF630) // (PIOB) Set Output Data Register
+#define AT91C_PIOB_ODSR ((AT91_REG *) 	0xFFFFF638) // (PIOB) Output Data Status Register
+#define AT91C_PIOB_CODR ((AT91_REG *) 	0xFFFFF634) // (PIOB) Clear Output Data Register
+#define AT91C_PIOB_PDSR ((AT91_REG *) 	0xFFFFF63C) // (PIOB) Pin Data Status Register
+#define AT91C_PIOB_OWER ((AT91_REG *) 	0xFFFFF6A0) // (PIOB) Output Write Enable Register
+#define AT91C_PIOB_IER  ((AT91_REG *) 	0xFFFFF640) // (PIOB) Interrupt Enable Register
+#define AT91C_PIOB_OWDR ((AT91_REG *) 	0xFFFFF6A4) // (PIOB) Output Write Disable Register
+#define AT91C_PIOB_MDDR ((AT91_REG *) 	0xFFFFF654) // (PIOB) Multi-driver Disable Register
+#define AT91C_PIOB_ISR  ((AT91_REG *) 	0xFFFFF64C) // (PIOB) Interrupt Status Register
+#define AT91C_PIOB_IDR  ((AT91_REG *) 	0xFFFFF644) // (PIOB) Interrupt Disable Register
+#define AT91C_PIOB_PDR  ((AT91_REG *) 	0xFFFFF604) // (PIOB) PIO Disable Register
+// ========== Register definition for PIOA peripheral ========== 
+#define AT91C_PIOA_IMR  ((AT91_REG *) 	0xFFFFF448) // (PIOA) Interrupt Mask Register
+#define AT91C_PIOA_IER  ((AT91_REG *) 	0xFFFFF440) // (PIOA) Interrupt Enable Register
+#define AT91C_PIOA_OWDR ((AT91_REG *) 	0xFFFFF4A4) // (PIOA) Output Write Disable Register
+#define AT91C_PIOA_ISR  ((AT91_REG *) 	0xFFFFF44C) // (PIOA) Interrupt Status Register
+#define AT91C_PIOA_PPUDR ((AT91_REG *) 	0xFFFFF460) // (PIOA) Pull-up Disable Register
+#define AT91C_PIOA_MDSR ((AT91_REG *) 	0xFFFFF458) // (PIOA) Multi-driver Status Register
+#define AT91C_PIOA_MDER ((AT91_REG *) 	0xFFFFF450) // (PIOA) Multi-driver Enable Register
+#define AT91C_PIOA_PER  ((AT91_REG *) 	0xFFFFF400) // (PIOA) PIO Enable Register
+#define AT91C_PIOA_PSR  ((AT91_REG *) 	0xFFFFF408) // (PIOA) PIO Status Register
+#define AT91C_PIOA_OER  ((AT91_REG *) 	0xFFFFF410) // (PIOA) Output Enable Register
+#define AT91C_PIOA_BSR  ((AT91_REG *) 	0xFFFFF474) // (PIOA) Select B Register
+#define AT91C_PIOA_PPUER ((AT91_REG *) 	0xFFFFF464) // (PIOA) Pull-up Enable Register
+#define AT91C_PIOA_MDDR ((AT91_REG *) 	0xFFFFF454) // (PIOA) Multi-driver Disable Register
+#define AT91C_PIOA_PDR  ((AT91_REG *) 	0xFFFFF404) // (PIOA) PIO Disable Register
+#define AT91C_PIOA_ODR  ((AT91_REG *) 	0xFFFFF414) // (PIOA) Output Disable Registerr
+#define AT91C_PIOA_IFDR ((AT91_REG *) 	0xFFFFF424) // (PIOA) Input Filter Disable Register
+#define AT91C_PIOA_ABSR ((AT91_REG *) 	0xFFFFF478) // (PIOA) AB Select Status Register
+#define AT91C_PIOA_ASR  ((AT91_REG *) 	0xFFFFF470) // (PIOA) Select A Register
+#define AT91C_PIOA_PPUSR ((AT91_REG *) 	0xFFFFF468) // (PIOA) Pad Pull-up Status Register
+#define AT91C_PIOA_ODSR ((AT91_REG *) 	0xFFFFF438) // (PIOA) Output Data Status Register
+#define AT91C_PIOA_SODR ((AT91_REG *) 	0xFFFFF430) // (PIOA) Set Output Data Register
+#define AT91C_PIOA_IFSR ((AT91_REG *) 	0xFFFFF428) // (PIOA) Input Filter Status Register
+#define AT91C_PIOA_IFER ((AT91_REG *) 	0xFFFFF420) // (PIOA) Input Filter Enable Register
+#define AT91C_PIOA_OSR  ((AT91_REG *) 	0xFFFFF418) // (PIOA) Output Status Register
+#define AT91C_PIOA_IDR  ((AT91_REG *) 	0xFFFFF444) // (PIOA) Interrupt Disable Register
+#define AT91C_PIOA_PDSR ((AT91_REG *) 	0xFFFFF43C) // (PIOA) Pin Data Status Register
+#define AT91C_PIOA_CODR ((AT91_REG *) 	0xFFFFF434) // (PIOA) Clear Output Data Register
+#define AT91C_PIOA_OWSR ((AT91_REG *) 	0xFFFFF4A8) // (PIOA) Output Write Status Register
+#define AT91C_PIOA_OWER ((AT91_REG *) 	0xFFFFF4A0) // (PIOA) Output Write Enable Register
+// ========== Register definition for DBGU peripheral ========== 
+#define AT91C_DBGU_C2R  ((AT91_REG *) 	0xFFFFF244) // (DBGU) Chip ID2 Register
+#define AT91C_DBGU_THR  ((AT91_REG *) 	0xFFFFF21C) // (DBGU) Transmitter Holding Register
+#define AT91C_DBGU_CSR  ((AT91_REG *) 	0xFFFFF214) // (DBGU) Channel Status Register
+#define AT91C_DBGU_IDR  ((AT91_REG *) 	0xFFFFF20C) // (DBGU) Interrupt Disable Register
+#define AT91C_DBGU_MR   ((AT91_REG *) 	0xFFFFF204) // (DBGU) Mode Register
+#define AT91C_DBGU_FNTR ((AT91_REG *) 	0xFFFFF248) // (DBGU) Force NTRST Register
+#define AT91C_DBGU_C1R  ((AT91_REG *) 	0xFFFFF240) // (DBGU) Chip ID1 Register
+#define AT91C_DBGU_BRGR ((AT91_REG *) 	0xFFFFF220) // (DBGU) Baud Rate Generator Register
+#define AT91C_DBGU_RHR  ((AT91_REG *) 	0xFFFFF218) // (DBGU) Receiver Holding Register
+#define AT91C_DBGU_IMR  ((AT91_REG *) 	0xFFFFF210) // (DBGU) Interrupt Mask Register
+#define AT91C_DBGU_IER  ((AT91_REG *) 	0xFFFFF208) // (DBGU) Interrupt Enable Register
+#define AT91C_DBGU_CR   ((AT91_REG *) 	0xFFFFF200) // (DBGU) Control Register
+// ========== Register definition for PDC_DBGU peripheral ========== 
+#define AT91C_DBGU_TNCR ((AT91_REG *) 	0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register
+#define AT91C_DBGU_RNCR ((AT91_REG *) 	0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register
+#define AT91C_DBGU_PTCR ((AT91_REG *) 	0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register
+#define AT91C_DBGU_PTSR ((AT91_REG *) 	0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register
+#define AT91C_DBGU_RCR  ((AT91_REG *) 	0xFFFFF304) // (PDC_DBGU) Receive Counter Register
+#define AT91C_DBGU_TCR  ((AT91_REG *) 	0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register
+#define AT91C_DBGU_RPR  ((AT91_REG *) 	0xFFFFF300) // (PDC_DBGU) Receive Pointer Register
+#define AT91C_DBGU_TPR  ((AT91_REG *) 	0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register
+#define AT91C_DBGU_RNPR ((AT91_REG *) 	0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register
+#define AT91C_DBGU_TNPR ((AT91_REG *) 	0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register
+// ========== Register definition for AIC peripheral ========== 
+#define AT91C_AIC_ICCR  ((AT91_REG *) 	0xFFFFF128) // (AIC) Interrupt Clear Command Register
+#define AT91C_AIC_IECR  ((AT91_REG *) 	0xFFFFF120) // (AIC) Interrupt Enable Command Register
+#define AT91C_AIC_SMR   ((AT91_REG *) 	0xFFFFF000) // (AIC) Source Mode Register
+#define AT91C_AIC_ISCR  ((AT91_REG *) 	0xFFFFF12C) // (AIC) Interrupt Set Command Register
+#define AT91C_AIC_EOICR ((AT91_REG *) 	0xFFFFF130) // (AIC) End of Interrupt Command Register
+#define AT91C_AIC_DCR   ((AT91_REG *) 	0xFFFFF138) // (AIC) Debug Control Register (Protect)
+#define AT91C_AIC_FFER  ((AT91_REG *) 	0xFFFFF140) // (AIC) Fast Forcing Enable Register
+#define AT91C_AIC_SVR   ((AT91_REG *) 	0xFFFFF080) // (AIC) Source Vector Register
+#define AT91C_AIC_SPU   ((AT91_REG *) 	0xFFFFF134) // (AIC) Spurious Vector Register
+#define AT91C_AIC_FFDR  ((AT91_REG *) 	0xFFFFF144) // (AIC) Fast Forcing Disable Register
+#define AT91C_AIC_FVR   ((AT91_REG *) 	0xFFFFF104) // (AIC) FIQ Vector Register
+#define AT91C_AIC_FFSR  ((AT91_REG *) 	0xFFFFF148) // (AIC) Fast Forcing Status Register
+#define AT91C_AIC_IMR   ((AT91_REG *) 	0xFFFFF110) // (AIC) Interrupt Mask Register
+#define AT91C_AIC_ISR   ((AT91_REG *) 	0xFFFFF108) // (AIC) Interrupt Status Register
+#define AT91C_AIC_IVR   ((AT91_REG *) 	0xFFFFF100) // (AIC) IRQ Vector Register
+#define AT91C_AIC_IDCR  ((AT91_REG *) 	0xFFFFF124) // (AIC) Interrupt Disable Command Register
+#define AT91C_AIC_CISR  ((AT91_REG *) 	0xFFFFF114) // (AIC) Core Interrupt Status Register
+#define AT91C_AIC_IPR   ((AT91_REG *) 	0xFFFFF10C) // (AIC) Interrupt Pending Register
+// ========== Register definition for PDC_SPI peripheral ========== 
+#define AT91C_SPI_PTCR  ((AT91_REG *) 	0xFFFE0120) // (PDC_SPI) PDC Transfer Control Register
+#define AT91C_SPI_TNPR  ((AT91_REG *) 	0xFFFE0118) // (PDC_SPI) Transmit Next Pointer Register
+#define AT91C_SPI_RNPR  ((AT91_REG *) 	0xFFFE0110) // (PDC_SPI) Receive Next Pointer Register
+#define AT91C_SPI_TPR   ((AT91_REG *) 	0xFFFE0108) // (PDC_SPI) Transmit Pointer Register
+#define AT91C_SPI_RPR   ((AT91_REG *) 	0xFFFE0100) // (PDC_SPI) Receive Pointer Register
+#define AT91C_SPI_PTSR  ((AT91_REG *) 	0xFFFE0124) // (PDC_SPI) PDC Transfer Status Register
+#define AT91C_SPI_TNCR  ((AT91_REG *) 	0xFFFE011C) // (PDC_SPI) Transmit Next Counter Register
+#define AT91C_SPI_RNCR  ((AT91_REG *) 	0xFFFE0114) // (PDC_SPI) Receive Next Counter Register
+#define AT91C_SPI_TCR   ((AT91_REG *) 	0xFFFE010C) // (PDC_SPI) Transmit Counter Register
+#define AT91C_SPI_RCR   ((AT91_REG *) 	0xFFFE0104) // (PDC_SPI) Receive Counter Register
+// ========== Register definition for SPI peripheral ========== 
+#define AT91C_SPI_CSR   ((AT91_REG *) 	0xFFFE0030) // (SPI) Chip Select Register
+#define AT91C_SPI_IDR   ((AT91_REG *) 	0xFFFE0018) // (SPI) Interrupt Disable Register
+#define AT91C_SPI_SR    ((AT91_REG *) 	0xFFFE0010) // (SPI) Status Register
+#define AT91C_SPI_RDR   ((AT91_REG *) 	0xFFFE0008) // (SPI) Receive Data Register
+#define AT91C_SPI_CR    ((AT91_REG *) 	0xFFFE0000) // (SPI) Control Register
+#define AT91C_SPI_IMR   ((AT91_REG *) 	0xFFFE001C) // (SPI) Interrupt Mask Register
+#define AT91C_SPI_IER   ((AT91_REG *) 	0xFFFE0014) // (SPI) Interrupt Enable Register
+#define AT91C_SPI_TDR   ((AT91_REG *) 	0xFFFE000C) // (SPI) Transmit Data Register
+#define AT91C_SPI_MR    ((AT91_REG *) 	0xFFFE0004) // (SPI) Mode Register
+// ========== Register definition for PDC_SSC2 peripheral ========== 
+#define AT91C_SSC2_PTCR ((AT91_REG *) 	0xFFFD8120) // (PDC_SSC2) PDC Transfer Control Register
+#define AT91C_SSC2_TNPR ((AT91_REG *) 	0xFFFD8118) // (PDC_SSC2) Transmit Next Pointer Register
+#define AT91C_SSC2_RNPR ((AT91_REG *) 	0xFFFD8110) // (PDC_SSC2) Receive Next Pointer Register
+#define AT91C_SSC2_TPR  ((AT91_REG *) 	0xFFFD8108) // (PDC_SSC2) Transmit Pointer Register
+#define AT91C_SSC2_RPR  ((AT91_REG *) 	0xFFFD8100) // (PDC_SSC2) Receive Pointer Register
+#define AT91C_SSC2_PTSR ((AT91_REG *) 	0xFFFD8124) // (PDC_SSC2) PDC Transfer Status Register
+#define AT91C_SSC2_TNCR ((AT91_REG *) 	0xFFFD811C) // (PDC_SSC2) Transmit Next Counter Register
+#define AT91C_SSC2_RNCR ((AT91_REG *) 	0xFFFD8114) // (PDC_SSC2) Receive Next Counter Register
+#define AT91C_SSC2_TCR  ((AT91_REG *) 	0xFFFD810C) // (PDC_SSC2) Transmit Counter Register
+#define AT91C_SSC2_RCR  ((AT91_REG *) 	0xFFFD8104) // (PDC_SSC2) Receive Counter Register
+// ========== Register definition for SSC2 peripheral ========== 
+#define AT91C_SSC2_IMR  ((AT91_REG *) 	0xFFFD804C) // (SSC2) Interrupt Mask Register
+#define AT91C_SSC2_IER  ((AT91_REG *) 	0xFFFD8044) // (SSC2) Interrupt Enable Register
+#define AT91C_SSC2_RC1R ((AT91_REG *) 	0xFFFD803C) // (SSC2) Receive Compare 1 Register
+#define AT91C_SSC2_TSHR ((AT91_REG *) 	0xFFFD8034) // (SSC2) Transmit Sync Holding Register
+#define AT91C_SSC2_CMR  ((AT91_REG *) 	0xFFFD8004) // (SSC2) Clock Mode Register
+#define AT91C_SSC2_IDR  ((AT91_REG *) 	0xFFFD8048) // (SSC2) Interrupt Disable Register
+#define AT91C_SSC2_TCMR ((AT91_REG *) 	0xFFFD8018) // (SSC2) Transmit Clock Mode Register
+#define AT91C_SSC2_RCMR ((AT91_REG *) 	0xFFFD8010) // (SSC2) Receive Clock ModeRegister
+#define AT91C_SSC2_CR   ((AT91_REG *) 	0xFFFD8000) // (SSC2) Control Register
+#define AT91C_SSC2_RFMR ((AT91_REG *) 	0xFFFD8014) // (SSC2) Receive Frame Mode Register
+#define AT91C_SSC2_TFMR ((AT91_REG *) 	0xFFFD801C) // (SSC2) Transmit Frame Mode Register
+#define AT91C_SSC2_THR  ((AT91_REG *) 	0xFFFD8024) // (SSC2) Transmit Holding Register
+#define AT91C_SSC2_SR   ((AT91_REG *) 	0xFFFD8040) // (SSC2) Status Register
+#define AT91C_SSC2_RC0R ((AT91_REG *) 	0xFFFD8038) // (SSC2) Receive Compare 0 Register
+#define AT91C_SSC2_RSHR ((AT91_REG *) 	0xFFFD8030) // (SSC2) Receive Sync Holding Register
+#define AT91C_SSC2_RHR  ((AT91_REG *) 	0xFFFD8020) // (SSC2) Receive Holding Register
+// ========== Register definition for PDC_SSC1 peripheral ========== 
+#define AT91C_SSC1_PTCR ((AT91_REG *) 	0xFFFD4120) // (PDC_SSC1) PDC Transfer Control Register
+#define AT91C_SSC1_TNPR ((AT91_REG *) 	0xFFFD4118) // (PDC_SSC1) Transmit Next Pointer Register
+#define AT91C_SSC1_RNPR ((AT91_REG *) 	0xFFFD4110) // (PDC_SSC1) Receive Next Pointer Register
+#define AT91C_SSC1_TPR  ((AT91_REG *) 	0xFFFD4108) // (PDC_SSC1) Transmit Pointer Register
+#define AT91C_SSC1_RPR  ((AT91_REG *) 	0xFFFD4100) // (PDC_SSC1) Receive Pointer Register
+#define AT91C_SSC1_PTSR ((AT91_REG *) 	0xFFFD4124) // (PDC_SSC1) PDC Transfer Status Register
+#define AT91C_SSC1_TNCR ((AT91_REG *) 	0xFFFD411C) // (PDC_SSC1) Transmit Next Counter Register
+#define AT91C_SSC1_RNCR ((AT91_REG *) 	0xFFFD4114) // (PDC_SSC1) Receive Next Counter Register
+#define AT91C_SSC1_TCR  ((AT91_REG *) 	0xFFFD410C) // (PDC_SSC1) Transmit Counter Register
+#define AT91C_SSC1_RCR  ((AT91_REG *) 	0xFFFD4104) // (PDC_SSC1) Receive Counter Register
+// ========== Register definition for SSC1 peripheral ========== 
+#define AT91C_SSC1_RFMR ((AT91_REG *) 	0xFFFD4014) // (SSC1) Receive Frame Mode Register
+#define AT91C_SSC1_CMR  ((AT91_REG *) 	0xFFFD4004) // (SSC1) Clock Mode Register
+#define AT91C_SSC1_IDR  ((AT91_REG *) 	0xFFFD4048) // (SSC1) Interrupt Disable Register
+#define AT91C_SSC1_SR   ((AT91_REG *) 	0xFFFD4040) // (SSC1) Status Register
+#define AT91C_SSC1_RC0R ((AT91_REG *) 	0xFFFD4038) // (SSC1) Receive Compare 0 Register
+#define AT91C_SSC1_RSHR ((AT91_REG *) 	0xFFFD4030) // (SSC1) Receive Sync Holding Register
+#define AT91C_SSC1_RHR  ((AT91_REG *) 	0xFFFD4020) // (SSC1) Receive Holding Register
+#define AT91C_SSC1_TCMR ((AT91_REG *) 	0xFFFD4018) // (SSC1) Transmit Clock Mode Register
+#define AT91C_SSC1_RCMR ((AT91_REG *) 	0xFFFD4010) // (SSC1) Receive Clock ModeRegister
+#define AT91C_SSC1_CR   ((AT91_REG *) 	0xFFFD4000) // (SSC1) Control Register
+#define AT91C_SSC1_IMR  ((AT91_REG *) 	0xFFFD404C) // (SSC1) Interrupt Mask Register
+#define AT91C_SSC1_IER  ((AT91_REG *) 	0xFFFD4044) // (SSC1) Interrupt Enable Register
+#define AT91C_SSC1_RC1R ((AT91_REG *) 	0xFFFD403C) // (SSC1) Receive Compare 1 Register
+#define AT91C_SSC1_TSHR ((AT91_REG *) 	0xFFFD4034) // (SSC1) Transmit Sync Holding Register
+#define AT91C_SSC1_THR  ((AT91_REG *) 	0xFFFD4024) // (SSC1) Transmit Holding Register
+#define AT91C_SSC1_TFMR ((AT91_REG *) 	0xFFFD401C) // (SSC1) Transmit Frame Mode Register
+// ========== Register definition for PDC_SSC0 peripheral ========== 
+#define AT91C_SSC0_PTCR ((AT91_REG *) 	0xFFFD0120) // (PDC_SSC0) PDC Transfer Control Register
+#define AT91C_SSC0_TNPR ((AT91_REG *) 	0xFFFD0118) // (PDC_SSC0) Transmit Next Pointer Register
+#define AT91C_SSC0_RNPR ((AT91_REG *) 	0xFFFD0110) // (PDC_SSC0) Receive Next Pointer Register
+#define AT91C_SSC0_TPR  ((AT91_REG *) 	0xFFFD0108) // (PDC_SSC0) Transmit Pointer Register
+#define AT91C_SSC0_RPR  ((AT91_REG *) 	0xFFFD0100) // (PDC_SSC0) Receive Pointer Register
+#define AT91C_SSC0_PTSR ((AT91_REG *) 	0xFFFD0124) // (PDC_SSC0) PDC Transfer Status Register
+#define AT91C_SSC0_TNCR ((AT91_REG *) 	0xFFFD011C) // (PDC_SSC0) Transmit Next Counter Register
+#define AT91C_SSC0_RNCR ((AT91_REG *) 	0xFFFD0114) // (PDC_SSC0) Receive Next Counter Register
+#define AT91C_SSC0_TCR  ((AT91_REG *) 	0xFFFD010C) // (PDC_SSC0) Transmit Counter Register
+#define AT91C_SSC0_RCR  ((AT91_REG *) 	0xFFFD0104) // (PDC_SSC0) Receive Counter Register
+// ========== Register definition for SSC0 peripheral ========== 
+#define AT91C_SSC0_IMR  ((AT91_REG *) 	0xFFFD004C) // (SSC0) Interrupt Mask Register
+#define AT91C_SSC0_IER  ((AT91_REG *) 	0xFFFD0044) // (SSC0) Interrupt Enable Register
+#define AT91C_SSC0_RC1R ((AT91_REG *) 	0xFFFD003C) // (SSC0) Receive Compare 1 Register
+#define AT91C_SSC0_TSHR ((AT91_REG *) 	0xFFFD0034) // (SSC0) Transmit Sync Holding Register
+#define AT91C_SSC0_THR  ((AT91_REG *) 	0xFFFD0024) // (SSC0) Transmit Holding Register
+#define AT91C_SSC0_TFMR ((AT91_REG *) 	0xFFFD001C) // (SSC0) Transmit Frame Mode Register
+#define AT91C_SSC0_RFMR ((AT91_REG *) 	0xFFFD0014) // (SSC0) Receive Frame Mode Register
+#define AT91C_SSC0_CMR  ((AT91_REG *) 	0xFFFD0004) // (SSC0) Clock Mode Register
+#define AT91C_SSC0_IDR  ((AT91_REG *) 	0xFFFD0048) // (SSC0) Interrupt Disable Register
+#define AT91C_SSC0_SR   ((AT91_REG *) 	0xFFFD0040) // (SSC0) Status Register
+#define AT91C_SSC0_RC0R ((AT91_REG *) 	0xFFFD0038) // (SSC0) Receive Compare 0 Register
+#define AT91C_SSC0_RSHR ((AT91_REG *) 	0xFFFD0030) // (SSC0) Receive Sync Holding Register
+#define AT91C_SSC0_RHR  ((AT91_REG *) 	0xFFFD0020) // (SSC0) Receive Holding Register
+#define AT91C_SSC0_TCMR ((AT91_REG *) 	0xFFFD0018) // (SSC0) Transmit Clock Mode Register
+#define AT91C_SSC0_RCMR ((AT91_REG *) 	0xFFFD0010) // (SSC0) Receive Clock ModeRegister
+#define AT91C_SSC0_CR   ((AT91_REG *) 	0xFFFD0000) // (SSC0) Control Register
+// ========== Register definition for PDC_US3 peripheral ========== 
+#define AT91C_US3_PTSR  ((AT91_REG *) 	0xFFFCC124) // (PDC_US3) PDC Transfer Status Register
+#define AT91C_US3_TNCR  ((AT91_REG *) 	0xFFFCC11C) // (PDC_US3) Transmit Next Counter Register
+#define AT91C_US3_RNCR  ((AT91_REG *) 	0xFFFCC114) // (PDC_US3) Receive Next Counter Register
+#define AT91C_US3_TCR   ((AT91_REG *) 	0xFFFCC10C) // (PDC_US3) Transmit Counter Register
+#define AT91C_US3_RCR   ((AT91_REG *) 	0xFFFCC104) // (PDC_US3) Receive Counter Register
+#define AT91C_US3_PTCR  ((AT91_REG *) 	0xFFFCC120) // (PDC_US3) PDC Transfer Control Register
+#define AT91C_US3_TNPR  ((AT91_REG *) 	0xFFFCC118) // (PDC_US3) Transmit Next Pointer Register
+#define AT91C_US3_RNPR  ((AT91_REG *) 	0xFFFCC110) // (PDC_US3) Receive Next Pointer Register
+#define AT91C_US3_TPR   ((AT91_REG *) 	0xFFFCC108) // (PDC_US3) Transmit Pointer Register
+#define AT91C_US3_RPR   ((AT91_REG *) 	0xFFFCC100) // (PDC_US3) Receive Pointer Register
+// ========== Register definition for US3 peripheral ========== 
+#define AT91C_US3_IF    ((AT91_REG *) 	0xFFFCC04C) // (US3) IRDA_FILTER Register
+#define AT91C_US3_NER   ((AT91_REG *) 	0xFFFCC044) // (US3) Nb Errors Register
+#define AT91C_US3_RTOR  ((AT91_REG *) 	0xFFFCC024) // (US3) Receiver Time-out Register
+#define AT91C_US3_THR   ((AT91_REG *) 	0xFFFCC01C) // (US3) Transmitter Holding Register
+#define AT91C_US3_CSR   ((AT91_REG *) 	0xFFFCC014) // (US3) Channel Status Register
+#define AT91C_US3_IDR   ((AT91_REG *) 	0xFFFCC00C) // (US3) Interrupt Disable Register
+#define AT91C_US3_MR    ((AT91_REG *) 	0xFFFCC004) // (US3) Mode Register
+#define AT91C_US3_XXR   ((AT91_REG *) 	0xFFFCC048) // (US3) XON_XOFF Register
+#define AT91C_US3_FIDI  ((AT91_REG *) 	0xFFFCC040) // (US3) FI_DI_Ratio Register
+#define AT91C_US3_TTGR  ((AT91_REG *) 	0xFFFCC028) // (US3) Transmitter Time-guard Register
+#define AT91C_US3_BRGR  ((AT91_REG *) 	0xFFFCC020) // (US3) Baud Rate Generator Register
+#define AT91C_US3_RHR   ((AT91_REG *) 	0xFFFCC018) // (US3) Receiver Holding Register
+#define AT91C_US3_IMR   ((AT91_REG *) 	0xFFFCC010) // (US3) Interrupt Mask Register
+#define AT91C_US3_IER   ((AT91_REG *) 	0xFFFCC008) // (US3) Interrupt Enable Register
+#define AT91C_US3_CR    ((AT91_REG *) 	0xFFFCC000) // (US3) Control Register
+// ========== Register definition for PDC_US2 peripheral ========== 
+#define AT91C_US2_PTSR  ((AT91_REG *) 	0xFFFC8124) // (PDC_US2) PDC Transfer Status Register
+#define AT91C_US2_TNCR  ((AT91_REG *) 	0xFFFC811C) // (PDC_US2) Transmit Next Counter Register
+#define AT91C_US2_RNCR  ((AT91_REG *) 	0xFFFC8114) // (PDC_US2) Receive Next Counter Register
+#define AT91C_US2_TCR   ((AT91_REG *) 	0xFFFC810C) // (PDC_US2) Transmit Counter Register
+#define AT91C_US2_PTCR  ((AT91_REG *) 	0xFFFC8120) // (PDC_US2) PDC Transfer Control Register
+#define AT91C_US2_RCR   ((AT91_REG *) 	0xFFFC8104) // (PDC_US2) Receive Counter Register
+#define AT91C_US2_TNPR  ((AT91_REG *) 	0xFFFC8118) // (PDC_US2) Transmit Next Pointer Register
+#define AT91C_US2_RPR   ((AT91_REG *) 	0xFFFC8100) // (PDC_US2) Receive Pointer Register
+#define AT91C_US2_TPR   ((AT91_REG *) 	0xFFFC8108) // (PDC_US2) Transmit Pointer Register
+#define AT91C_US2_RNPR  ((AT91_REG *) 	0xFFFC8110) // (PDC_US2) Receive Next Pointer Register
+// ========== Register definition for US2 peripheral ========== 
+#define AT91C_US2_XXR   ((AT91_REG *) 	0xFFFC8048) // (US2) XON_XOFF Register
+#define AT91C_US2_FIDI  ((AT91_REG *) 	0xFFFC8040) // (US2) FI_DI_Ratio Register
+#define AT91C_US2_TTGR  ((AT91_REG *) 	0xFFFC8028) // (US2) Transmitter Time-guard Register
+#define AT91C_US2_BRGR  ((AT91_REG *) 	0xFFFC8020) // (US2) Baud Rate Generator Register
+#define AT91C_US2_RHR   ((AT91_REG *) 	0xFFFC8018) // (US2) Receiver Holding Register
+#define AT91C_US2_IMR   ((AT91_REG *) 	0xFFFC8010) // (US2) Interrupt Mask Register
+#define AT91C_US2_IER   ((AT91_REG *) 	0xFFFC8008) // (US2) Interrupt Enable Register
+#define AT91C_US2_CR    ((AT91_REG *) 	0xFFFC8000) // (US2) Control Register
+#define AT91C_US2_IF    ((AT91_REG *) 	0xFFFC804C) // (US2) IRDA_FILTER Register
+#define AT91C_US2_NER   ((AT91_REG *) 	0xFFFC8044) // (US2) Nb Errors Register
+#define AT91C_US2_RTOR  ((AT91_REG *) 	0xFFFC8024) // (US2) Receiver Time-out Register
+#define AT91C_US2_THR   ((AT91_REG *) 	0xFFFC801C) // (US2) Transmitter Holding Register
+#define AT91C_US2_CSR   ((AT91_REG *) 	0xFFFC8014) // (US2) Channel Status Register
+#define AT91C_US2_IDR   ((AT91_REG *) 	0xFFFC800C) // (US2) Interrupt Disable Register
+#define AT91C_US2_MR    ((AT91_REG *) 	0xFFFC8004) // (US2) Mode Register
+// ========== Register definition for PDC_US1 peripheral ========== 
+#define AT91C_US1_PTSR  ((AT91_REG *) 	0xFFFC4124) // (PDC_US1) PDC Transfer Status Register
+#define AT91C_US1_TNCR  ((AT91_REG *) 	0xFFFC411C) // (PDC_US1) Transmit Next Counter Register
+#define AT91C_US1_RNCR  ((AT91_REG *) 	0xFFFC4114) // (PDC_US1) Receive Next Counter Register
+#define AT91C_US1_TCR   ((AT91_REG *) 	0xFFFC410C) // (PDC_US1) Transmit Counter Register
+#define AT91C_US1_RCR   ((AT91_REG *) 	0xFFFC4104) // (PDC_US1) Receive Counter Register
+#define AT91C_US1_PTCR  ((AT91_REG *) 	0xFFFC4120) // (PDC_US1) PDC Transfer Control Register
+#define AT91C_US1_TNPR  ((AT91_REG *) 	0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register
+#define AT91C_US1_RNPR  ((AT91_REG *) 	0xFFFC4110) // (PDC_US1) Receive Next Pointer Register
+#define AT91C_US1_TPR   ((AT91_REG *) 	0xFFFC4108) // (PDC_US1) Transmit Pointer Register
+#define AT91C_US1_RPR   ((AT91_REG *) 	0xFFFC4100) // (PDC_US1) Receive Pointer Register
+// ========== Register definition for US1 peripheral ========== 
+#define AT91C_US1_XXR   ((AT91_REG *) 	0xFFFC4048) // (US1) XON_XOFF Register
+#define AT91C_US1_RHR   ((AT91_REG *) 	0xFFFC4018) // (US1) Receiver Holding Register
+#define AT91C_US1_IMR   ((AT91_REG *) 	0xFFFC4010) // (US1) Interrupt Mask Register
+#define AT91C_US1_IER   ((AT91_REG *) 	0xFFFC4008) // (US1) Interrupt Enable Register
+#define AT91C_US1_CR    ((AT91_REG *) 	0xFFFC4000) // (US1) Control Register
+#define AT91C_US1_RTOR  ((AT91_REG *) 	0xFFFC4024) // (US1) Receiver Time-out Register
+#define AT91C_US1_THR   ((AT91_REG *) 	0xFFFC401C) // (US1) Transmitter Holding Register
+#define AT91C_US1_CSR   ((AT91_REG *) 	0xFFFC4014) // (US1) Channel Status Register
+#define AT91C_US1_IDR   ((AT91_REG *) 	0xFFFC400C) // (US1) Interrupt Disable Register
+#define AT91C_US1_FIDI  ((AT91_REG *) 	0xFFFC4040) // (US1) FI_DI_Ratio Register
+#define AT91C_US1_BRGR  ((AT91_REG *) 	0xFFFC4020) // (US1) Baud Rate Generator Register
+#define AT91C_US1_TTGR  ((AT91_REG *) 	0xFFFC4028) // (US1) Transmitter Time-guard Register
+#define AT91C_US1_IF    ((AT91_REG *) 	0xFFFC404C) // (US1) IRDA_FILTER Register
+#define AT91C_US1_NER   ((AT91_REG *) 	0xFFFC4044) // (US1) Nb Errors Register
+#define AT91C_US1_MR    ((AT91_REG *) 	0xFFFC4004) // (US1) Mode Register
+// ========== Register definition for PDC_US0 peripheral ========== 
+#define AT91C_US0_PTCR  ((AT91_REG *) 	0xFFFC0120) // (PDC_US0) PDC Transfer Control Register
+#define AT91C_US0_TNPR  ((AT91_REG *) 	0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register
+#define AT91C_US0_RNPR  ((AT91_REG *) 	0xFFFC0110) // (PDC_US0) Receive Next Pointer Register
+#define AT91C_US0_TPR   ((AT91_REG *) 	0xFFFC0108) // (PDC_US0) Transmit Pointer Register
+#define AT91C_US0_RPR   ((AT91_REG *) 	0xFFFC0100) // (PDC_US0) Receive Pointer Register
+#define AT91C_US0_PTSR  ((AT91_REG *) 	0xFFFC0124) // (PDC_US0) PDC Transfer Status Register
+#define AT91C_US0_TNCR  ((AT91_REG *) 	0xFFFC011C) // (PDC_US0) Transmit Next Counter Register
+#define AT91C_US0_RNCR  ((AT91_REG *) 	0xFFFC0114) // (PDC_US0) Receive Next Counter Register
+#define AT91C_US0_TCR   ((AT91_REG *) 	0xFFFC010C) // (PDC_US0) Transmit Counter Register
+#define AT91C_US0_RCR   ((AT91_REG *) 	0xFFFC0104) // (PDC_US0) Receive Counter Register
+// ========== Register definition for US0 peripheral ========== 
+#define AT91C_US0_TTGR  ((AT91_REG *) 	0xFFFC0028) // (US0) Transmitter Time-guard Register
+#define AT91C_US0_BRGR  ((AT91_REG *) 	0xFFFC0020) // (US0) Baud Rate Generator Register
+#define AT91C_US0_RHR   ((AT91_REG *) 	0xFFFC0018) // (US0) Receiver Holding Register
+#define AT91C_US0_IMR   ((AT91_REG *) 	0xFFFC0010) // (US0) Interrupt Mask Register
+#define AT91C_US0_NER   ((AT91_REG *) 	0xFFFC0044) // (US0) Nb Errors Register
+#define AT91C_US0_RTOR  ((AT91_REG *) 	0xFFFC0024) // (US0) Receiver Time-out Register
+#define AT91C_US0_XXR   ((AT91_REG *) 	0xFFFC0048) // (US0) XON_XOFF Register
+#define AT91C_US0_FIDI  ((AT91_REG *) 	0xFFFC0040) // (US0) FI_DI_Ratio Register
+#define AT91C_US0_CR    ((AT91_REG *) 	0xFFFC0000) // (US0) Control Register
+#define AT91C_US0_IER   ((AT91_REG *) 	0xFFFC0008) // (US0) Interrupt Enable Register
+#define AT91C_US0_IF    ((AT91_REG *) 	0xFFFC004C) // (US0) IRDA_FILTER Register
+#define AT91C_US0_MR    ((AT91_REG *) 	0xFFFC0004) // (US0) Mode Register
+#define AT91C_US0_IDR   ((AT91_REG *) 	0xFFFC000C) // (US0) Interrupt Disable Register
+#define AT91C_US0_CSR   ((AT91_REG *) 	0xFFFC0014) // (US0) Channel Status Register
+#define AT91C_US0_THR   ((AT91_REG *) 	0xFFFC001C) // (US0) Transmitter Holding Register
+// ========== Register definition for TWI peripheral ========== 
+#define AT91C_TWI_RHR   ((AT91_REG *) 	0xFFFB8030) // (TWI) Receive Holding Register
+#define AT91C_TWI_IDR   ((AT91_REG *) 	0xFFFB8028) // (TWI) Interrupt Disable Register
+#define AT91C_TWI_SR    ((AT91_REG *) 	0xFFFB8020) // (TWI) Status Register
+#define AT91C_TWI_CWGR  ((AT91_REG *) 	0xFFFB8010) // (TWI) Clock Waveform Generator Register
+#define AT91C_TWI_SMR   ((AT91_REG *) 	0xFFFB8008) // (TWI) Slave Mode Register
+#define AT91C_TWI_CR    ((AT91_REG *) 	0xFFFB8000) // (TWI) Control Register
+#define AT91C_TWI_THR   ((AT91_REG *) 	0xFFFB8034) // (TWI) Transmit Holding Register
+#define AT91C_TWI_IMR   ((AT91_REG *) 	0xFFFB802C) // (TWI) Interrupt Mask Register
+#define AT91C_TWI_IER   ((AT91_REG *) 	0xFFFB8024) // (TWI) Interrupt Enable Register
+#define AT91C_TWI_IADR  ((AT91_REG *) 	0xFFFB800C) // (TWI) Internal Address Register
+#define AT91C_TWI_MMR   ((AT91_REG *) 	0xFFFB8004) // (TWI) Master Mode Register
+// ========== Register definition for PDC_MCI peripheral ========== 
+#define AT91C_MCI_PTCR  ((AT91_REG *) 	0xFFFB4120) // (PDC_MCI) PDC Transfer Control Register
+#define AT91C_MCI_TNPR  ((AT91_REG *) 	0xFFFB4118) // (PDC_MCI) Transmit Next Pointer Register
+#define AT91C_MCI_RNPR  ((AT91_REG *) 	0xFFFB4110) // (PDC_MCI) Receive Next Pointer Register
+#define AT91C_MCI_TPR   ((AT91_REG *) 	0xFFFB4108) // (PDC_MCI) Transmit Pointer Register
+#define AT91C_MCI_RPR   ((AT91_REG *) 	0xFFFB4100) // (PDC_MCI) Receive Pointer Register
+#define AT91C_MCI_PTSR  ((AT91_REG *) 	0xFFFB4124) // (PDC_MCI) PDC Transfer Status Register
+#define AT91C_MCI_TNCR  ((AT91_REG *) 	0xFFFB411C) // (PDC_MCI) Transmit Next Counter Register
+#define AT91C_MCI_RNCR  ((AT91_REG *) 	0xFFFB4114) // (PDC_MCI) Receive Next Counter Register
+#define AT91C_MCI_TCR   ((AT91_REG *) 	0xFFFB410C) // (PDC_MCI) Transmit Counter Register
+#define AT91C_MCI_RCR   ((AT91_REG *) 	0xFFFB4104) // (PDC_MCI) Receive Counter Register
+// ========== Register definition for MCI peripheral ========== 
+#define AT91C_MCI_IDR   ((AT91_REG *) 	0xFFFB4048) // (MCI) MCI Interrupt Disable Register
+#define AT91C_MCI_SR    ((AT91_REG *) 	0xFFFB4040) // (MCI) MCI Status Register
+#define AT91C_MCI_RDR   ((AT91_REG *) 	0xFFFB4030) // (MCI) MCI Receive Data Register
+#define AT91C_MCI_RSPR  ((AT91_REG *) 	0xFFFB4020) // (MCI) MCI Response Register
+#define AT91C_MCI_ARGR  ((AT91_REG *) 	0xFFFB4010) // (MCI) MCI Argument Register
+#define AT91C_MCI_DTOR  ((AT91_REG *) 	0xFFFB4008) // (MCI) MCI Data Timeout Register
+#define AT91C_MCI_CR    ((AT91_REG *) 	0xFFFB4000) // (MCI) MCI Control Register
+#define AT91C_MCI_IMR   ((AT91_REG *) 	0xFFFB404C) // (MCI) MCI Interrupt Mask Register
+#define AT91C_MCI_IER   ((AT91_REG *) 	0xFFFB4044) // (MCI) MCI Interrupt Enable Register
+#define AT91C_MCI_TDR   ((AT91_REG *) 	0xFFFB4034) // (MCI) MCI Transmit Data Register
+#define AT91C_MCI_CMDR  ((AT91_REG *) 	0xFFFB4014) // (MCI) MCI Command Register
+#define AT91C_MCI_SDCR  ((AT91_REG *) 	0xFFFB400C) // (MCI) MCI SD Card Register
+#define AT91C_MCI_MR    ((AT91_REG *) 	0xFFFB4004) // (MCI) MCI Mode Register
+// ========== Register definition for UDP peripheral ========== 
+#define AT91C_UDP_ISR   ((AT91_REG *) 	0xFFFB001C) // (UDP) Interrupt Status Register
+#define AT91C_UDP_IDR   ((AT91_REG *) 	0xFFFB0014) // (UDP) Interrupt Disable Register
+#define AT91C_UDP_GLBSTATE ((AT91_REG *) 	0xFFFB0004) // (UDP) Global State Register
+#define AT91C_UDP_FDR   ((AT91_REG *) 	0xFFFB0050) // (UDP) Endpoint FIFO Data Register
+#define AT91C_UDP_CSR   ((AT91_REG *) 	0xFFFB0030) // (UDP) Endpoint Control and Status Register
+#define AT91C_UDP_RSTEP ((AT91_REG *) 	0xFFFB0028) // (UDP) Reset Endpoint Register
+#define AT91C_UDP_ICR   ((AT91_REG *) 	0xFFFB0020) // (UDP) Interrupt Clear Register
+#define AT91C_UDP_IMR   ((AT91_REG *) 	0xFFFB0018) // (UDP) Interrupt Mask Register
+#define AT91C_UDP_IER   ((AT91_REG *) 	0xFFFB0010) // (UDP) Interrupt Enable Register
+#define AT91C_UDP_FADDR ((AT91_REG *) 	0xFFFB0008) // (UDP) Function Address Register
+#define AT91C_UDP_NUM   ((AT91_REG *) 	0xFFFB0000) // (UDP) Frame Number Register
+// ========== Register definition for TC5 peripheral ========== 
+#define AT91C_TC5_CMR   ((AT91_REG *) 	0xFFFA4084) // (TC5) Channel Mode Register
+#define AT91C_TC5_IDR   ((AT91_REG *) 	0xFFFA40A8) // (TC5) Interrupt Disable Register
+#define AT91C_TC5_SR    ((AT91_REG *) 	0xFFFA40A0) // (TC5) Status Register
+#define AT91C_TC5_RB    ((AT91_REG *) 	0xFFFA4098) // (TC5) Register B
+#define AT91C_TC5_CV    ((AT91_REG *) 	0xFFFA4090) // (TC5) Counter Value
+#define AT91C_TC5_CCR   ((AT91_REG *) 	0xFFFA4080) // (TC5) Channel Control Register
+#define AT91C_TC5_IMR   ((AT91_REG *) 	0xFFFA40AC) // (TC5) Interrupt Mask Register
+#define AT91C_TC5_IER   ((AT91_REG *) 	0xFFFA40A4) // (TC5) Interrupt Enable Register
+#define AT91C_TC5_RC    ((AT91_REG *) 	0xFFFA409C) // (TC5) Register C
+#define AT91C_TC5_RA    ((AT91_REG *) 	0xFFFA4094) // (TC5) Register A
+// ========== Register definition for TC4 peripheral ========== 
+#define AT91C_TC4_IMR   ((AT91_REG *) 	0xFFFA406C) // (TC4) Interrupt Mask Register
+#define AT91C_TC4_IER   ((AT91_REG *) 	0xFFFA4064) // (TC4) Interrupt Enable Register
+#define AT91C_TC4_RC    ((AT91_REG *) 	0xFFFA405C) // (TC4) Register C
+#define AT91C_TC4_RA    ((AT91_REG *) 	0xFFFA4054) // (TC4) Register A
+#define AT91C_TC4_CMR   ((AT91_REG *) 	0xFFFA4044) // (TC4) Channel Mode Register
+#define AT91C_TC4_IDR   ((AT91_REG *) 	0xFFFA4068) // (TC4) Interrupt Disable Register
+#define AT91C_TC4_SR    ((AT91_REG *) 	0xFFFA4060) // (TC4) Status Register
+#define AT91C_TC4_RB    ((AT91_REG *) 	0xFFFA4058) // (TC4) Register B
+#define AT91C_TC4_CV    ((AT91_REG *) 	0xFFFA4050) // (TC4) Counter Value
+#define AT91C_TC4_CCR   ((AT91_REG *) 	0xFFFA4040) // (TC4) Channel Control Register
+// ========== Register definition for TC3 peripheral ========== 
+#define AT91C_TC3_IMR   ((AT91_REG *) 	0xFFFA402C) // (TC3) Interrupt Mask Register
+#define AT91C_TC3_CV    ((AT91_REG *) 	0xFFFA4010) // (TC3) Counter Value
+#define AT91C_TC3_CCR   ((AT91_REG *) 	0xFFFA4000) // (TC3) Channel Control Register
+#define AT91C_TC3_IER   ((AT91_REG *) 	0xFFFA4024) // (TC3) Interrupt Enable Register
+#define AT91C_TC3_CMR   ((AT91_REG *) 	0xFFFA4004) // (TC3) Channel Mode Register
+#define AT91C_TC3_RA    ((AT91_REG *) 	0xFFFA4014) // (TC3) Register A
+#define AT91C_TC3_RC    ((AT91_REG *) 	0xFFFA401C) // (TC3) Register C
+#define AT91C_TC3_IDR   ((AT91_REG *) 	0xFFFA4028) // (TC3) Interrupt Disable Register
+#define AT91C_TC3_RB    ((AT91_REG *) 	0xFFFA4018) // (TC3) Register B
+#define AT91C_TC3_SR    ((AT91_REG *) 	0xFFFA4020) // (TC3) Status Register
+// ========== Register definition for TCB1 peripheral ========== 
+#define AT91C_TCB1_BCR  ((AT91_REG *) 	0xFFFA4140) // (TCB1) TC Block Control Register
+#define AT91C_TCB1_BMR  ((AT91_REG *) 	0xFFFA4144) // (TCB1) TC Block Mode Register
+// ========== Register definition for TC2 peripheral ========== 
+#define AT91C_TC2_IMR   ((AT91_REG *) 	0xFFFA00AC) // (TC2) Interrupt Mask Register
+#define AT91C_TC2_IER   ((AT91_REG *) 	0xFFFA00A4) // (TC2) Interrupt Enable Register
+#define AT91C_TC2_RC    ((AT91_REG *) 	0xFFFA009C) // (TC2) Register C
+#define AT91C_TC2_RA    ((AT91_REG *) 	0xFFFA0094) // (TC2) Register A
+#define AT91C_TC2_CMR   ((AT91_REG *) 	0xFFFA0084) // (TC2) Channel Mode Register
+#define AT91C_TC2_IDR   ((AT91_REG *) 	0xFFFA00A8) // (TC2) Interrupt Disable Register
+#define AT91C_TC2_SR    ((AT91_REG *) 	0xFFFA00A0) // (TC2) Status Register
+#define AT91C_TC2_RB    ((AT91_REG *) 	0xFFFA0098) // (TC2) Register B
+#define AT91C_TC2_CV    ((AT91_REG *) 	0xFFFA0090) // (TC2) Counter Value
+#define AT91C_TC2_CCR   ((AT91_REG *) 	0xFFFA0080) // (TC2) Channel Control Register
+// ========== Register definition for TC1 peripheral ========== 
+#define AT91C_TC1_IMR   ((AT91_REG *) 	0xFFFA006C) // (TC1) Interrupt Mask Register
+#define AT91C_TC1_IER   ((AT91_REG *) 	0xFFFA0064) // (TC1) Interrupt Enable Register
+#define AT91C_TC1_RC    ((AT91_REG *) 	0xFFFA005C) // (TC1) Register C
+#define AT91C_TC1_RA    ((AT91_REG *) 	0xFFFA0054) // (TC1) Register A
+#define AT91C_TC1_CMR   ((AT91_REG *) 	0xFFFA0044) // (TC1) Channel Mode Register
+#define AT91C_TC1_IDR   ((AT91_REG *) 	0xFFFA0068) // (TC1) Interrupt Disable Register
+#define AT91C_TC1_SR    ((AT91_REG *) 	0xFFFA0060) // (TC1) Status Register
+#define AT91C_TC1_RB    ((AT91_REG *) 	0xFFFA0058) // (TC1) Register B
+#define AT91C_TC1_CV    ((AT91_REG *) 	0xFFFA0050) // (TC1) Counter Value
+#define AT91C_TC1_CCR   ((AT91_REG *) 	0xFFFA0040) // (TC1) Channel Control Register
+// ========== Register definition for TC0 peripheral ========== 
+#define AT91C_TC0_IMR   ((AT91_REG *) 	0xFFFA002C) // (TC0) Interrupt Mask Register
+#define AT91C_TC0_IER   ((AT91_REG *) 	0xFFFA0024) // (TC0) Interrupt Enable Register
+#define AT91C_TC0_RC    ((AT91_REG *) 	0xFFFA001C) // (TC0) Register C
+#define AT91C_TC0_RA    ((AT91_REG *) 	0xFFFA0014) // (TC0) Register A
+#define AT91C_TC0_CMR   ((AT91_REG *) 	0xFFFA0004) // (TC0) Channel Mode Register
+#define AT91C_TC0_IDR   ((AT91_REG *) 	0xFFFA0028) // (TC0) Interrupt Disable Register
+#define AT91C_TC0_SR    ((AT91_REG *) 	0xFFFA0020) // (TC0) Status Register
+#define AT91C_TC0_RB    ((AT91_REG *) 	0xFFFA0018) // (TC0) Register B
+#define AT91C_TC0_CV    ((AT91_REG *) 	0xFFFA0010) // (TC0) Counter Value
+#define AT91C_TC0_CCR   ((AT91_REG *) 	0xFFFA0000) // (TC0) Channel Control Register
+// ========== Register definition for TCB0 peripheral ========== 
+#define AT91C_TCB0_BMR  ((AT91_REG *) 	0xFFFA00C4) // (TCB0) TC Block Mode Register
+#define AT91C_TCB0_BCR  ((AT91_REG *) 	0xFFFA00C0) // (TCB0) TC Block Control Register
+// ========== Register definition for UHP peripheral ========== 
+#define AT91C_UHP_HcRhDescriptorA ((AT91_REG *) 	0x00300048) // (UHP) Root Hub characteristics A
+#define AT91C_UHP_HcRhPortStatus ((AT91_REG *) 	0x00300054) // (UHP) Root Hub Port Status Register
+#define AT91C_UHP_HcRhDescriptorB ((AT91_REG *) 	0x0030004C) // (UHP) Root Hub characteristics B
+#define AT91C_UHP_HcControl ((AT91_REG *) 	0x00300004) // (UHP) Operating modes for the Host Controller
+#define AT91C_UHP_HcInterruptStatus ((AT91_REG *) 	0x0030000C) // (UHP) Interrupt Status Register
+#define AT91C_UHP_HcRhStatus ((AT91_REG *) 	0x00300050) // (UHP) Root Hub Status register
+#define AT91C_UHP_HcRevision ((AT91_REG *) 	0x00300000) // (UHP) Revision
+#define AT91C_UHP_HcCommandStatus ((AT91_REG *) 	0x00300008) // (UHP) Command & status Register
+#define AT91C_UHP_HcInterruptEnable ((AT91_REG *) 	0x00300010) // (UHP) Interrupt Enable Register
+#define AT91C_UHP_HcHCCA ((AT91_REG *) 	0x00300018) // (UHP) Pointer to the Host Controller Communication Area
+#define AT91C_UHP_HcControlHeadED ((AT91_REG *) 	0x00300020) // (UHP) First Endpoint Descriptor of the Control list
+#define AT91C_UHP_HcInterruptDisable ((AT91_REG *) 	0x00300014) // (UHP) Interrupt Disable Register
+#define AT91C_UHP_HcPeriodCurrentED ((AT91_REG *) 	0x0030001C) // (UHP) Current Isochronous or Interrupt Endpoint Descriptor
+#define AT91C_UHP_HcControlCurrentED ((AT91_REG *) 	0x00300024) // (UHP) Endpoint Control and Status Register
+#define AT91C_UHP_HcBulkCurrentED ((AT91_REG *) 	0x0030002C) // (UHP) Current endpoint of the Bulk list
+#define AT91C_UHP_HcFmInterval ((AT91_REG *) 	0x00300034) // (UHP) Bit time between 2 consecutive SOFs
+#define AT91C_UHP_HcBulkHeadED ((AT91_REG *) 	0x00300028) // (UHP) First endpoint register of the Bulk list
+#define AT91C_UHP_HcBulkDoneHead ((AT91_REG *) 	0x00300030) // (UHP) Last completed transfer descriptor
+#define AT91C_UHP_HcFmRemaining ((AT91_REG *) 	0x00300038) // (UHP) Bit time remaining in the current Frame
+#define AT91C_UHP_HcPeriodicStart ((AT91_REG *) 	0x00300040) // (UHP) Periodic Start
+#define AT91C_UHP_HcLSThreshold ((AT91_REG *) 	0x00300044) // (UHP) LS Threshold
+#define AT91C_UHP_HcFmNumber ((AT91_REG *) 	0x0030003C) // (UHP) Frame number
+// ========== Register definition for EMAC peripheral ========== 
+#define AT91C_EMAC_RSR  ((AT91_REG *) 	0xFFFBC020) // (EMAC) Receive Status Register
+#define AT91C_EMAC_MAN  ((AT91_REG *) 	0xFFFBC034) // (EMAC) PHY Maintenance Register
+#define AT91C_EMAC_HSH  ((AT91_REG *) 	0xFFFBC090) // (EMAC) Hash Address High[63:32]
+#define AT91C_EMAC_MCOL ((AT91_REG *) 	0xFFFBC048) // (EMAC) Multiple Collision Frame Register
+#define AT91C_EMAC_IER  ((AT91_REG *) 	0xFFFBC028) // (EMAC) Interrupt Enable Register
+#define AT91C_EMAC_SA2H ((AT91_REG *) 	0xFFFBC0A4) // (EMAC) Specific Address 2 High, Last 2 bytes
+#define AT91C_EMAC_HSL  ((AT91_REG *) 	0xFFFBC094) // (EMAC) Hash Address Low[31:0]
+#define AT91C_EMAC_LCOL ((AT91_REG *) 	0xFFFBC05C) // (EMAC) Late Collision Register
+#define AT91C_EMAC_OK   ((AT91_REG *) 	0xFFFBC04C) // (EMAC) Frames Received OK Register
+#define AT91C_EMAC_CFG  ((AT91_REG *) 	0xFFFBC004) // (EMAC) Network Configuration Register
+#define AT91C_EMAC_SA3L ((AT91_REG *) 	0xFFFBC0A8) // (EMAC) Specific Address 3 Low, First 4 bytes
+#define AT91C_EMAC_SEQE ((AT91_REG *) 	0xFFFBC050) // (EMAC) Frame Check Sequence Error Register
+#define AT91C_EMAC_ECOL ((AT91_REG *) 	0xFFFBC060) // (EMAC) Excessive Collision Register
+#define AT91C_EMAC_ELR  ((AT91_REG *) 	0xFFFBC070) // (EMAC) Excessive Length Error Register
+#define AT91C_EMAC_SR   ((AT91_REG *) 	0xFFFBC008) // (EMAC) Network Status Register
+#define AT91C_EMAC_RBQP ((AT91_REG *) 	0xFFFBC018) // (EMAC) Receive Buffer Queue Pointer
+#define AT91C_EMAC_CSE  ((AT91_REG *) 	0xFFFBC064) // (EMAC) Carrier Sense Error Register
+#define AT91C_EMAC_RJB  ((AT91_REG *) 	0xFFFBC074) // (EMAC) Receive Jabber Register
+#define AT91C_EMAC_USF  ((AT91_REG *) 	0xFFFBC078) // (EMAC) Undersize Frame Register
+#define AT91C_EMAC_IDR  ((AT91_REG *) 	0xFFFBC02C) // (EMAC) Interrupt Disable Register
+#define AT91C_EMAC_SA1L ((AT91_REG *) 	0xFFFBC098) // (EMAC) Specific Address 1 Low, First 4 bytes
+#define AT91C_EMAC_IMR  ((AT91_REG *) 	0xFFFBC030) // (EMAC) Interrupt Mask Register
+#define AT91C_EMAC_FRA  ((AT91_REG *) 	0xFFFBC040) // (EMAC) Frames Transmitted OK Register
+#define AT91C_EMAC_SA3H ((AT91_REG *) 	0xFFFBC0AC) // (EMAC) Specific Address 3 High, Last 2 bytes
+#define AT91C_EMAC_SA1H ((AT91_REG *) 	0xFFFBC09C) // (EMAC) Specific Address 1 High, Last 2 bytes
+#define AT91C_EMAC_SCOL ((AT91_REG *) 	0xFFFBC044) // (EMAC) Single Collision Frame Register
+#define AT91C_EMAC_ALE  ((AT91_REG *) 	0xFFFBC054) // (EMAC) Alignment Error Register
+#define AT91C_EMAC_TAR  ((AT91_REG *) 	0xFFFBC00C) // (EMAC) Transmit Address Register
+#define AT91C_EMAC_SA4L ((AT91_REG *) 	0xFFFBC0B0) // (EMAC) Specific Address 4 Low, First 4 bytes
+#define AT91C_EMAC_SA2L ((AT91_REG *) 	0xFFFBC0A0) // (EMAC) Specific Address 2 Low, First 4 bytes
+#define AT91C_EMAC_TUE  ((AT91_REG *) 	0xFFFBC068) // (EMAC) Transmit Underrun Error Register
+#define AT91C_EMAC_DTE  ((AT91_REG *) 	0xFFFBC058) // (EMAC) Deferred Transmission Frame Register
+#define AT91C_EMAC_TCR  ((AT91_REG *) 	0xFFFBC010) // (EMAC) Transmit Control Register
+#define AT91C_EMAC_CTL  ((AT91_REG *) 	0xFFFBC000) // (EMAC) Network Control Register
+#define AT91C_EMAC_SA4H ((AT91_REG *) 	0xFFFBC0B4) // (EMAC) Specific Address 4 High, Last 2 bytesr
+#define AT91C_EMAC_CDE  ((AT91_REG *) 	0xFFFBC06C) // (EMAC) Code Error Register
+#define AT91C_EMAC_SQEE ((AT91_REG *) 	0xFFFBC07C) // (EMAC) SQE Test Error Register
+#define AT91C_EMAC_TSR  ((AT91_REG *) 	0xFFFBC014) // (EMAC) Transmit Status Register
+#define AT91C_EMAC_DRFC ((AT91_REG *) 	0xFFFBC080) // (EMAC) Discarded RX Frame Register
+// ========== Register definition for EBI peripheral ========== 
+#define AT91C_EBI_CFGR  ((AT91_REG *) 	0xFFFFFF64) // (EBI) Configuration Register
+#define AT91C_EBI_CSA   ((AT91_REG *) 	0xFFFFFF60) // (EBI) Chip Select Assignment Register
+// ========== Register definition for SMC2 peripheral ========== 
+#define AT91C_SMC2_CSR  ((AT91_REG *) 	0xFFFFFF70) // (SMC2) SMC2 Chip Select Register
+// ========== Register definition for SDRC peripheral ========== 
+#define AT91C_SDRC_IMR  ((AT91_REG *) 	0xFFFFFFAC) // (SDRC) SDRAM Controller Interrupt Mask Register
+#define AT91C_SDRC_IER  ((AT91_REG *) 	0xFFFFFFA4) // (SDRC) SDRAM Controller Interrupt Enable Register
+#define AT91C_SDRC_SRR  ((AT91_REG *) 	0xFFFFFF9C) // (SDRC) SDRAM Controller Self Refresh Register
+#define AT91C_SDRC_TR   ((AT91_REG *) 	0xFFFFFF94) // (SDRC) SDRAM Controller Refresh Timer Register
+#define AT91C_SDRC_ISR  ((AT91_REG *) 	0xFFFFFFB0) // (SDRC) SDRAM Controller Interrupt Mask Register
+#define AT91C_SDRC_IDR  ((AT91_REG *) 	0xFFFFFFA8) // (SDRC) SDRAM Controller Interrupt Disable Register
+#define AT91C_SDRC_LPR  ((AT91_REG *) 	0xFFFFFFA0) // (SDRC) SDRAM Controller Low Power Register
+#define AT91C_SDRC_CR   ((AT91_REG *) 	0xFFFFFF98) // (SDRC) SDRAM Controller Configuration Register
+#define AT91C_SDRC_MR   ((AT91_REG *) 	0xFFFFFF90) // (SDRC) SDRAM Controller Mode Register
+// ========== Register definition for BFC peripheral ========== 
+#define AT91C_BFC_MR    ((AT91_REG *) 	0xFFFFFFC0) // (BFC) BFC Mode Register
+
+// *****************************************************************************
+//               PIO DEFINITIONS FOR AT91RM9200
+// *****************************************************************************
+#define AT91C_PIO_PA0        ((unsigned int) 1 <<  0) // Pin Controlled by PA0
+#define AT91C_PA0_MISO     ((unsigned int) AT91C_PIO_PA0) //  SPI Master In Slave
+#define AT91C_PA0_PCK3     ((unsigned int) AT91C_PIO_PA0) //  PMC Programmable Clock Output 3
+#define AT91C_PIO_PA1        ((unsigned int) 1 <<  1) // Pin Controlled by PA1
+#define AT91C_PA1_MOSI     ((unsigned int) AT91C_PIO_PA1) //  SPI Master Out Slave
+#define AT91C_PA1_PCK0     ((unsigned int) AT91C_PIO_PA1) //  PMC Programmable Clock Output 0
+#define AT91C_PIO_PA10       ((unsigned int) 1 << 10) // Pin Controlled by PA10
+#define AT91C_PA10_ETX1     ((unsigned int) AT91C_PIO_PA10) //  Ethernet MAC Transmit Data 1
+#define AT91C_PA10_MCDB1    ((unsigned int) AT91C_PIO_PA10) //  Multimedia Card B Data 1
+#define AT91C_PIO_PA11       ((unsigned int) 1 << 11) // Pin Controlled by PA11
+#define AT91C_PA11_ECRS_ECRSDV ((unsigned int) AT91C_PIO_PA11) //  Ethernet MAC Carrier Sense/Carrier Sense and Data Valid
+#define AT91C_PA11_MCDB2    ((unsigned int) AT91C_PIO_PA11) //  Multimedia Card B Data 2
+#define AT91C_PIO_PA12       ((unsigned int) 1 << 12) // Pin Controlled by PA12
+#define AT91C_PA12_ERX0     ((unsigned int) AT91C_PIO_PA12) //  Ethernet MAC Receive Data 0
+#define AT91C_PA12_MCDB3    ((unsigned int) AT91C_PIO_PA12) //  Multimedia Card B Data 3
+#define AT91C_PIO_PA13       ((unsigned int) 1 << 13) // Pin Controlled by PA13
+#define AT91C_PA13_ERX1     ((unsigned int) AT91C_PIO_PA13) //  Ethernet MAC Receive Data 1
+#define AT91C_PA13_TCLK0    ((unsigned int) AT91C_PIO_PA13) //  Timer Counter 0 external clock input
+#define AT91C_PIO_PA14       ((unsigned int) 1 << 14) // Pin Controlled by PA14
+#define AT91C_PA14_ERXER    ((unsigned int) AT91C_PIO_PA14) //  Ethernet MAC Receive Error
+#define AT91C_PA14_TCLK1    ((unsigned int) AT91C_PIO_PA14) //  Timer Counter 1 external clock input
+#define AT91C_PIO_PA15       ((unsigned int) 1 << 15) // Pin Controlled by PA15
+#define AT91C_PA15_EMDC     ((unsigned int) AT91C_PIO_PA15) //  Ethernet MAC Management Data Clock
+#define AT91C_PA15_TCLK2    ((unsigned int) AT91C_PIO_PA15) //  Timer Counter 2 external clock input
+#define AT91C_PIO_PA16       ((unsigned int) 1 << 16) // Pin Controlled by PA16
+#define AT91C_PA16_EMDIO    ((unsigned int) AT91C_PIO_PA16) //  Ethernet MAC Management Data Input/Output
+#define AT91C_PA16_IRQ6     ((unsigned int) AT91C_PIO_PA16) //  AIC Interrupt input 6
+#define AT91C_PIO_PA17       ((unsigned int) 1 << 17) // Pin Controlled by PA17
+#define AT91C_PA17_TXD0     ((unsigned int) AT91C_PIO_PA17) //  USART 0 Transmit Data
+#define AT91C_PA17_TIOA0    ((unsigned int) AT91C_PIO_PA17) //  Timer Counter 0 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PA18       ((unsigned int) 1 << 18) // Pin Controlled by PA18
+#define AT91C_PA18_RXD0     ((unsigned int) AT91C_PIO_PA18) //  USART 0 Receive Data
+#define AT91C_PA18_TIOB0    ((unsigned int) AT91C_PIO_PA18) //  Timer Counter 0 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PA19       ((unsigned int) 1 << 19) // Pin Controlled by PA19
+#define AT91C_PA19_SCK0     ((unsigned int) AT91C_PIO_PA19) //  USART 0 Serial Clock
+#define AT91C_PA19_TIOA1    ((unsigned int) AT91C_PIO_PA19) //  Timer Counter 1 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PA2        ((unsigned int) 1 <<  2) // Pin Controlled by PA2
+#define AT91C_PA2_SPCK     ((unsigned int) AT91C_PIO_PA2) //  SPI Serial Clock
+#define AT91C_PA2_IRQ4     ((unsigned int) AT91C_PIO_PA2) //  AIC Interrupt Input 4
+#define AT91C_PIO_PA20       ((unsigned int) 1 << 20) // Pin Controlled by PA20
+#define AT91C_PA20_CTS0     ((unsigned int) AT91C_PIO_PA20) //  USART 0 Clear To Send
+#define AT91C_PA20_TIOB1    ((unsigned int) AT91C_PIO_PA20) //  Timer Counter 1 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PA21       ((unsigned int) 1 << 21) // Pin Controlled by PA21
+#define AT91C_PA21_RTS0     ((unsigned int) AT91C_PIO_PA21) //  Usart 0 Ready To Send
+#define AT91C_PA21_TIOA2    ((unsigned int) AT91C_PIO_PA21) //  Timer Counter 2 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PA22       ((unsigned int) 1 << 22) // Pin Controlled by PA22
+#define AT91C_PA22_RXD2     ((unsigned int) AT91C_PIO_PA22) //  USART 2 Receive Data
+#define AT91C_PA22_TIOB2    ((unsigned int) AT91C_PIO_PA22) //  Timer Counter 2 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PA23       ((unsigned int) 1 << 23) // Pin Controlled by PA23
+#define AT91C_PA23_TXD2     ((unsigned int) AT91C_PIO_PA23) //  USART 2 Transmit Data
+#define AT91C_PA23_IRQ3     ((unsigned int) AT91C_PIO_PA23) //  Interrupt input 3
+#define AT91C_PIO_PA24       ((unsigned int) 1 << 24) // Pin Controlled by PA24
+#define AT91C_PA24_SCK2     ((unsigned int) AT91C_PIO_PA24) //  USART2 Serial Clock
+#define AT91C_PA24_PCK1     ((unsigned int) AT91C_PIO_PA24) //  PMC Programmable Clock Output 1
+#define AT91C_PIO_PA25       ((unsigned int) 1 << 25) // Pin Controlled by PA25
+#define AT91C_PA25_TWD      ((unsigned int) AT91C_PIO_PA25) //  TWI Two-wire Serial Data
+#define AT91C_PA25_IRQ2     ((unsigned int) AT91C_PIO_PA25) //  Interrupt input 2
+#define AT91C_PIO_PA26       ((unsigned int) 1 << 26) // Pin Controlled by PA26
+#define AT91C_PA26_TWCK     ((unsigned int) AT91C_PIO_PA26) //  TWI Two-wire Serial Clock
+#define AT91C_PA26_IRQ1     ((unsigned int) AT91C_PIO_PA26) //  Interrupt input 1
+#define AT91C_PIO_PA27       ((unsigned int) 1 << 27) // Pin Controlled by PA27
+#define AT91C_PA27_MCCK     ((unsigned int) AT91C_PIO_PA27) //  Multimedia Card Clock
+#define AT91C_PA27_TCLK3    ((unsigned int) AT91C_PIO_PA27) //  Timer Counter 3 External Clock Input
+#define AT91C_PIO_PA28       ((unsigned int) 1 << 28) // Pin Controlled by PA28
+#define AT91C_PA28_MCCDA    ((unsigned int) AT91C_PIO_PA28) //  Multimedia Card A Command
+#define AT91C_PA28_TCLK4    ((unsigned int) AT91C_PIO_PA28) //  Timer Counter 4 external Clock Input
+#define AT91C_PIO_PA29       ((unsigned int) 1 << 29) // Pin Controlled by PA29
+#define AT91C_PA29_MCDA0    ((unsigned int) AT91C_PIO_PA29) //  Multimedia Card A Data 0
+#define AT91C_PA29_TCLK5    ((unsigned int) AT91C_PIO_PA29) //  Timer Counter 5 external clock input
+#define AT91C_PIO_PA3        ((unsigned int) 1 <<  3) // Pin Controlled by PA3
+#define AT91C_PA3_NPCS0    ((unsigned int) AT91C_PIO_PA3) //  SPI Peripheral Chip Select 0
+#define AT91C_PA3_IRQ5     ((unsigned int) AT91C_PIO_PA3) //  AIC Interrupt Input 5
+#define AT91C_PIO_PA30       ((unsigned int) 1 << 30) // Pin Controlled by PA30
+#define AT91C_PA30_DRXD     ((unsigned int) AT91C_PIO_PA30) //  DBGU Debug Receive Data
+#define AT91C_PA30_CTS2     ((unsigned int) AT91C_PIO_PA30) //  Usart 2 Clear To Send
+#define AT91C_PIO_PA31       ((unsigned int) 1 << 31) // Pin Controlled by PA31
+#define AT91C_PA31_DTXD     ((unsigned int) AT91C_PIO_PA31) //  DBGU Debug Transmit Data
+#define AT91C_PA31_RTS2     ((unsigned int) AT91C_PIO_PA31) //  USART 2 Ready To Send
+#define AT91C_PIO_PA4        ((unsigned int) 1 <<  4) // Pin Controlled by PA4
+#define AT91C_PA4_NPCS1    ((unsigned int) AT91C_PIO_PA4) //  SPI Peripheral Chip Select 1
+#define AT91C_PA4_PCK1     ((unsigned int) AT91C_PIO_PA4) //  PMC Programmable Clock Output 1
+#define AT91C_PIO_PA5        ((unsigned int) 1 <<  5) // Pin Controlled by PA5
+#define AT91C_PA5_NPCS2    ((unsigned int) AT91C_PIO_PA5) //  SPI Peripheral Chip Select 2
+#define AT91C_PA5_TXD3     ((unsigned int) AT91C_PIO_PA5) //  USART 3 Transmit Data
+#define AT91C_PIO_PA6        ((unsigned int) 1 <<  6) // Pin Controlled by PA6
+#define AT91C_PA6_NPCS3    ((unsigned int) AT91C_PIO_PA6) //  SPI Peripheral Chip Select 3
+#define AT91C_PA6_RXD3     ((unsigned int) AT91C_PIO_PA6) //  USART 3 Receive Data
+#define AT91C_PIO_PA7        ((unsigned int) 1 <<  7) // Pin Controlled by PA7
+#define AT91C_PA7_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PA7) //  Ethernet MAC Transmit Clock/Reference Clock
+#define AT91C_PA7_PCK2     ((unsigned int) AT91C_PIO_PA7) //  PMC Programmable Clock 2
+#define AT91C_PIO_PA8        ((unsigned int) 1 <<  8) // Pin Controlled by PA8
+#define AT91C_PA8_ETXEN    ((unsigned int) AT91C_PIO_PA8) //  Ethernet MAC Transmit Enable
+#define AT91C_PA8_MCCDB    ((unsigned int) AT91C_PIO_PA8) //  Multimedia Card B Command
+#define AT91C_PIO_PA9        ((unsigned int) 1 <<  9) // Pin Controlled by PA9
+#define AT91C_PA9_ETX0     ((unsigned int) AT91C_PIO_PA9) //  Ethernet MAC Transmit Data 0
+#define AT91C_PA9_MCDB0    ((unsigned int) AT91C_PIO_PA9) //  Multimedia Card B Data 0
+#define AT91C_PIO_PB0        ((unsigned int) 1 <<  0) // Pin Controlled by PB0
+#define AT91C_PB0_TF0      ((unsigned int) AT91C_PIO_PB0) //  SSC Transmit Frame Sync 0
+#define AT91C_PB0_TIOB3    ((unsigned int) AT91C_PIO_PB0) //  Timer Counter 3 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PB1        ((unsigned int) 1 <<  1) // Pin Controlled by PB1
+#define AT91C_PB1_TK0      ((unsigned int) AT91C_PIO_PB1) //  SSC Transmit Clock 0
+#define AT91C_PB1_CTS3     ((unsigned int) AT91C_PIO_PB1) //  USART 3 Clear To Send
+#define AT91C_PIO_PB10       ((unsigned int) 1 << 10) // Pin Controlled by PB10
+#define AT91C_PB10_RK1      ((unsigned int) AT91C_PIO_PB10) //  SSC Receive Clock 1
+#define AT91C_PB10_TIOA5    ((unsigned int) AT91C_PIO_PB10) //  Timer Counter 5 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PB11       ((unsigned int) 1 << 11) // Pin Controlled by PB11
+#define AT91C_PB11_RF1      ((unsigned int) AT91C_PIO_PB11) //  SSC Receive Frame Sync 1
+#define AT91C_PB11_TIOB5    ((unsigned int) AT91C_PIO_PB11) //  Timer Counter 5 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PB12       ((unsigned int) 1 << 12) // Pin Controlled by PB12
+#define AT91C_PB12_TF2      ((unsigned int) AT91C_PIO_PB12) //  SSC Transmit Frame Sync 2
+#define AT91C_PB12_ETX2     ((unsigned int) AT91C_PIO_PB12) //  Ethernet MAC Transmit Data 2
+#define AT91C_PIO_PB13       ((unsigned int) 1 << 13) // Pin Controlled by PB13
+#define AT91C_PB13_TK2      ((unsigned int) AT91C_PIO_PB13) //  SSC Transmit Clock 2
+#define AT91C_PB13_ETX3     ((unsigned int) AT91C_PIO_PB13) //  Ethernet MAC Transmit Data 3
+#define AT91C_PIO_PB14       ((unsigned int) 1 << 14) // Pin Controlled by PB14
+#define AT91C_PB14_TD2      ((unsigned int) AT91C_PIO_PB14) //  SSC Transmit Data 2
+#define AT91C_PB14_ETXER    ((unsigned int) AT91C_PIO_PB14) //  Ethernet MAC Transmikt Coding Error
+#define AT91C_PIO_PB15       ((unsigned int) 1 << 15) // Pin Controlled by PB15
+#define AT91C_PB15_RD2      ((unsigned int) AT91C_PIO_PB15) //  SSC Receive Data 2
+#define AT91C_PB15_ERX2     ((unsigned int) AT91C_PIO_PB15) //  Ethernet MAC Receive Data 2
+#define AT91C_PIO_PB16       ((unsigned int) 1 << 16) // Pin Controlled by PB16
+#define AT91C_PB16_RK2      ((unsigned int) AT91C_PIO_PB16) //  SSC Receive Clock 2
+#define AT91C_PB16_ERX3     ((unsigned int) AT91C_PIO_PB16) //  Ethernet MAC Receive Data 3
+#define AT91C_PIO_PB17       ((unsigned int) 1 << 17) // Pin Controlled by PB17
+#define AT91C_PB17_RF2      ((unsigned int) AT91C_PIO_PB17) //  SSC Receive Frame Sync 2
+#define AT91C_PB17_ERXDV    ((unsigned int) AT91C_PIO_PB17) //  Ethernet MAC Receive Data Valid
+#define AT91C_PIO_PB18       ((unsigned int) 1 << 18) // Pin Controlled by PB18
+#define AT91C_PB18_RI1      ((unsigned int) AT91C_PIO_PB18) //  USART 1 Ring Indicator
+#define AT91C_PB18_ECOL     ((unsigned int) AT91C_PIO_PB18) //  Ethernet MAC Collision Detected
+#define AT91C_PIO_PB19       ((unsigned int) 1 << 19) // Pin Controlled by PB19
+#define AT91C_PB19_DTR1     ((unsigned int) AT91C_PIO_PB19) //  USART 1 Data Terminal ready
+#define AT91C_PB19_ERXCK    ((unsigned int) AT91C_PIO_PB19) //  Ethernet MAC Receive Clock
+#define AT91C_PIO_PB2        ((unsigned int) 1 <<  2) // Pin Controlled by PB2
+#define AT91C_PB2_TD0      ((unsigned int) AT91C_PIO_PB2) //  SSC Transmit data
+#define AT91C_PB2_SCK3     ((unsigned int) AT91C_PIO_PB2) //  USART 3 Serial Clock
+#define AT91C_PIO_PB20       ((unsigned int) 1 << 20) // Pin Controlled by PB20
+#define AT91C_PB20_TXD1     ((unsigned int) AT91C_PIO_PB20) //  USART 1 Transmit Data
+#define AT91C_PIO_PB21       ((unsigned int) 1 << 21) // Pin Controlled by PB21
+#define AT91C_PB21_RXD1     ((unsigned int) AT91C_PIO_PB21) //  USART 1 Receive Data
+#define AT91C_PIO_PB22       ((unsigned int) 1 << 22) // Pin Controlled by PB22
+#define AT91C_PB22_SCK1     ((unsigned int) AT91C_PIO_PB22) //  USART1 Serial Clock
+#define AT91C_PIO_PB23       ((unsigned int) 1 << 23) // Pin Controlled by PB23
+#define AT91C_PB23_DCD1     ((unsigned int) AT91C_PIO_PB23) //  USART 1 Data Carrier Detect
+#define AT91C_PIO_PB24       ((unsigned int) 1 << 24) // Pin Controlled by PB24
+#define AT91C_PB24_CTS1     ((unsigned int) AT91C_PIO_PB24) //  USART 1 Clear To Send
+#define AT91C_PIO_PB25       ((unsigned int) 1 << 25) // Pin Controlled by PB25
+#define AT91C_PB25_DSR1     ((unsigned int) AT91C_PIO_PB25) //  USART 1 Data Set ready
+#define AT91C_PB25_EF100    ((unsigned int) AT91C_PIO_PB25) //  Ethernet MAC Force 100 Mbits/sec
+#define AT91C_PIO_PB26       ((unsigned int) 1 << 26) // Pin Controlled by PB26
+#define AT91C_PB26_RTS1     ((unsigned int) AT91C_PIO_PB26) //  Usart 0 Ready To Send
+#define AT91C_PIO_PB27       ((unsigned int) 1 << 27) // Pin Controlled by PB27
+#define AT91C_PB27_PCK0     ((unsigned int) AT91C_PIO_PB27) //  PMC Programmable Clock Output 0
+#define AT91C_PIO_PB28       ((unsigned int) 1 << 28) // Pin Controlled by PB28
+#define AT91C_PB28_FIQ      ((unsigned int) AT91C_PIO_PB28) //  AIC Fast Interrupt Input
+#define AT91C_PIO_PB29       ((unsigned int) 1 << 29) // Pin Controlled by PB29
+#define AT91C_PB29_IRQ0     ((unsigned int) AT91C_PIO_PB29) //  Interrupt input 0
+#define AT91C_PIO_PB3        ((unsigned int) 1 <<  3) // Pin Controlled by PB3
+#define AT91C_PB3_RD0      ((unsigned int) AT91C_PIO_PB3) //  SSC Receive Data
+#define AT91C_PB3_MCDA1    ((unsigned int) AT91C_PIO_PB3) //  Multimedia Card A Data 1
+#define AT91C_PIO_PB4        ((unsigned int) 1 <<  4) // Pin Controlled by PB4
+#define AT91C_PB4_RK0      ((unsigned int) AT91C_PIO_PB4) //  SSC Receive Clock
+#define AT91C_PB4_MCDA2    ((unsigned int) AT91C_PIO_PB4) //  Multimedia Card A Data 2
+#define AT91C_PIO_PB5        ((unsigned int) 1 <<  5) // Pin Controlled by PB5
+#define AT91C_PB5_RF0      ((unsigned int) AT91C_PIO_PB5) //  SSC Receive Frame Sync 0
+#define AT91C_PB5_MCDA3    ((unsigned int) AT91C_PIO_PB5) //  Multimedia Card A Data 3
+#define AT91C_PIO_PB6        ((unsigned int) 1 <<  6) // Pin Controlled by PB6
+#define AT91C_PB6_TF1      ((unsigned int) AT91C_PIO_PB6) //  SSC Transmit Frame Sync 1
+#define AT91C_PB6_TIOA3    ((unsigned int) AT91C_PIO_PB6) //  Timer Counter 4 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PB7        ((unsigned int) 1 <<  7) // Pin Controlled by PB7
+#define AT91C_PB7_TK1      ((unsigned int) AT91C_PIO_PB7) //  SSC Transmit Clock 1
+#define AT91C_PB7_TIOB3    ((unsigned int) AT91C_PIO_PB7) //  Timer Counter 3 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PB8        ((unsigned int) 1 <<  8) // Pin Controlled by PB8
+#define AT91C_PB8_TD1      ((unsigned int) AT91C_PIO_PB8) //  SSC Transmit Data 1
+#define AT91C_PB8_TIOA4    ((unsigned int) AT91C_PIO_PB8) //  Timer Counter 4 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PB9        ((unsigned int) 1 <<  9) // Pin Controlled by PB9
+#define AT91C_PB9_RD1      ((unsigned int) AT91C_PIO_PB9) //  SSC Receive Data 1
+#define AT91C_PB9_TIOB4    ((unsigned int) AT91C_PIO_PB9) //  Timer Counter 4 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PC0        ((unsigned int) 1 <<  0) // Pin Controlled by PC0
+#define AT91C_PC0_BFCK     ((unsigned int) AT91C_PIO_PC0) //  Burst Flash Clock
+#define AT91C_PIO_PC1        ((unsigned int) 1 <<  1) // Pin Controlled by PC1
+#define AT91C_PC1_BFRDY_SMOE ((unsigned int) AT91C_PIO_PC1) //  Burst Flash Ready
+#define AT91C_PIO_PC10       ((unsigned int) 1 << 10) // Pin Controlled by PC10
+#define AT91C_PC10_NCS4_CFCS ((unsigned int) AT91C_PIO_PC10) //  Compact Flash Chip Select
+#define AT91C_PIO_PC11       ((unsigned int) 1 << 11) // Pin Controlled by PC11
+#define AT91C_PC11_NCS5_CFCE1 ((unsigned int) AT91C_PIO_PC11) //  Chip Select 5 / Compact Flash Chip Enable 1
+#define AT91C_PIO_PC12       ((unsigned int) 1 << 12) // Pin Controlled by PC12
+#define AT91C_PC12_NCS6_CFCE2 ((unsigned int) AT91C_PIO_PC12) //  Chip Select 6 / Compact Flash Chip Enable 2
+#define AT91C_PIO_PC13       ((unsigned int) 1 << 13) // Pin Controlled by PC13
+#define AT91C_PC13_NCS7     ((unsigned int) AT91C_PIO_PC13) //  Chip Select 7
+#define AT91C_PIO_PC14       ((unsigned int) 1 << 14) // Pin Controlled by PC14
+#define AT91C_PIO_PC15       ((unsigned int) 1 << 15) // Pin Controlled by PC15
+#define AT91C_PIO_PC16       ((unsigned int) 1 << 16) // Pin Controlled by PC16
+#define AT91C_PC16_D16      ((unsigned int) AT91C_PIO_PC16) //  Data Bus [16]
+#define AT91C_PIO_PC17       ((unsigned int) 1 << 17) // Pin Controlled by PC17
+#define AT91C_PC17_D17      ((unsigned int) AT91C_PIO_PC17) //  Data Bus [17]
+#define AT91C_PIO_PC18       ((unsigned int) 1 << 18) // Pin Controlled by PC18
+#define AT91C_PC18_D18      ((unsigned int) AT91C_PIO_PC18) //  Data Bus [18]
+#define AT91C_PIO_PC19       ((unsigned int) 1 << 19) // Pin Controlled by PC19
+#define AT91C_PC19_D19      ((unsigned int) AT91C_PIO_PC19) //  Data Bus [19]
+#define AT91C_PIO_PC2        ((unsigned int) 1 <<  2) // Pin Controlled by PC2
+#define AT91C_PC2_BFAVD    ((unsigned int) AT91C_PIO_PC2) //  Burst Flash Address Valid
+#define AT91C_PIO_PC20       ((unsigned int) 1 << 20) // Pin Controlled by PC20
+#define AT91C_PC20_D20      ((unsigned int) AT91C_PIO_PC20) //  Data Bus [20]
+#define AT91C_PIO_PC21       ((unsigned int) 1 << 21) // Pin Controlled by PC21
+#define AT91C_PC21_D21      ((unsigned int) AT91C_PIO_PC21) //  Data Bus [21]
+#define AT91C_PIO_PC22       ((unsigned int) 1 << 22) // Pin Controlled by PC22
+#define AT91C_PC22_D22      ((unsigned int) AT91C_PIO_PC22) //  Data Bus [22]
+#define AT91C_PIO_PC23       ((unsigned int) 1 << 23) // Pin Controlled by PC23
+#define AT91C_PC23_D23      ((unsigned int) AT91C_PIO_PC23) //  Data Bus [23]
+#define AT91C_PIO_PC24       ((unsigned int) 1 << 24) // Pin Controlled by PC24
+#define AT91C_PC24_D24      ((unsigned int) AT91C_PIO_PC24) //  Data Bus [24]
+#define AT91C_PIO_PC25       ((unsigned int) 1 << 25) // Pin Controlled by PC25
+#define AT91C_PC25_D25      ((unsigned int) AT91C_PIO_PC25) //  Data Bus [25]
+#define AT91C_PIO_PC26       ((unsigned int) 1 << 26) // Pin Controlled by PC26
+#define AT91C_PC26_D26      ((unsigned int) AT91C_PIO_PC26) //  Data Bus [26]
+#define AT91C_PIO_PC27       ((unsigned int) 1 << 27) // Pin Controlled by PC27
+#define AT91C_PC27_D27      ((unsigned int) AT91C_PIO_PC27) //  Data Bus [27]
+#define AT91C_PIO_PC28       ((unsigned int) 1 << 28) // Pin Controlled by PC28
+#define AT91C_PC28_D28      ((unsigned int) AT91C_PIO_PC28) //  Data Bus [28]
+#define AT91C_PIO_PC29       ((unsigned int) 1 << 29) // Pin Controlled by PC29
+#define AT91C_PC29_D29      ((unsigned int) AT91C_PIO_PC29) //  Data Bus [29]
+#define AT91C_PIO_PC3        ((unsigned int) 1 <<  3) // Pin Controlled by PC3
+#define AT91C_PC3_BFBAA_SMWE ((unsigned int) AT91C_PIO_PC3) //  Burst Flash Address Advance / SmartMedia Write Enable
+#define AT91C_PIO_PC30       ((unsigned int) 1 << 30) // Pin Controlled by PC30
+#define AT91C_PC30_D30      ((unsigned int) AT91C_PIO_PC30) //  Data Bus [30]
+#define AT91C_PIO_PC31       ((unsigned int) 1 << 31) // Pin Controlled by PC31
+#define AT91C_PC31_D31      ((unsigned int) AT91C_PIO_PC31) //  Data Bus [31]
+#define AT91C_PIO_PC4        ((unsigned int) 1 <<  4) // Pin Controlled by PC4
+#define AT91C_PC4_BFOE     ((unsigned int) AT91C_PIO_PC4) //  Burst Flash Output Enable
+#define AT91C_PIO_PC5        ((unsigned int) 1 <<  5) // Pin Controlled by PC5
+#define AT91C_PC5_BFWE     ((unsigned int) AT91C_PIO_PC5) //  Burst Flash Write Enable
+#define AT91C_PIO_PC6        ((unsigned int) 1 <<  6) // Pin Controlled by PC6
+#define AT91C_PC6_NWAIT    ((unsigned int) AT91C_PIO_PC6) //  NWAIT
+#define AT91C_PIO_PC7        ((unsigned int) 1 <<  7) // Pin Controlled by PC7
+#define AT91C_PC7_A23      ((unsigned int) AT91C_PIO_PC7) //  Address Bus[23]
+#define AT91C_PIO_PC8        ((unsigned int) 1 <<  8) // Pin Controlled by PC8
+#define AT91C_PC8_A24      ((unsigned int) AT91C_PIO_PC8) //  Address Bus[24]
+#define AT91C_PIO_PC9        ((unsigned int) 1 <<  9) // Pin Controlled by PC9
+#define AT91C_PC9_A25_CFRNW ((unsigned int) AT91C_PIO_PC9) //  Address Bus[25] /  Compact Flash Read Not Write
+#define AT91C_PIO_PD0        ((unsigned int) 1 <<  0) // Pin Controlled by PD0
+#define AT91C_PD0_ETX0     ((unsigned int) AT91C_PIO_PD0) //  Ethernet MAC Transmit Data 0
+#define AT91C_PIO_PD1        ((unsigned int) 1 <<  1) // Pin Controlled by PD1
+#define AT91C_PD1_ETX1     ((unsigned int) AT91C_PIO_PD1) //  Ethernet MAC Transmit Data 1
+#define AT91C_PIO_PD10       ((unsigned int) 1 << 10) // Pin Controlled by PD10
+#define AT91C_PD10_PCK3     ((unsigned int) AT91C_PIO_PD10) //  PMC Programmable Clock Output 3
+#define AT91C_PD10_TPS1     ((unsigned int) AT91C_PIO_PD10) //  ETM ARM9 pipeline status 1
+#define AT91C_PIO_PD11       ((unsigned int) 1 << 11) // Pin Controlled by PD11
+#define AT91C_PD11_         ((unsigned int) AT91C_PIO_PD11) //  
+#define AT91C_PD11_TPS2     ((unsigned int) AT91C_PIO_PD11) //  ETM ARM9 pipeline status 2
+#define AT91C_PIO_PD12       ((unsigned int) 1 << 12) // Pin Controlled by PD12
+#define AT91C_PD12_         ((unsigned int) AT91C_PIO_PD12) //  
+#define AT91C_PD12_TPK0     ((unsigned int) AT91C_PIO_PD12) //  ETM Trace Packet 0
+#define AT91C_PIO_PD13       ((unsigned int) 1 << 13) // Pin Controlled by PD13
+#define AT91C_PD13_         ((unsigned int) AT91C_PIO_PD13) //  
+#define AT91C_PD13_TPK1     ((unsigned int) AT91C_PIO_PD13) //  ETM Trace Packet 1
+#define AT91C_PIO_PD14       ((unsigned int) 1 << 14) // Pin Controlled by PD14
+#define AT91C_PD14_         ((unsigned int) AT91C_PIO_PD14) //  
+#define AT91C_PD14_TPK2     ((unsigned int) AT91C_PIO_PD14) //  ETM Trace Packet 2
+#define AT91C_PIO_PD15       ((unsigned int) 1 << 15) // Pin Controlled by PD15
+#define AT91C_PD15_TD0      ((unsigned int) AT91C_PIO_PD15) //  SSC Transmit data
+#define AT91C_PD15_TPK3     ((unsigned int) AT91C_PIO_PD15) //  ETM Trace Packet 3
+#define AT91C_PIO_PD16       ((unsigned int) 1 << 16) // Pin Controlled by PD16
+#define AT91C_PD16_TD1      ((unsigned int) AT91C_PIO_PD16) //  SSC Transmit Data 1
+#define AT91C_PD16_TPK4     ((unsigned int) AT91C_PIO_PD16) //  ETM Trace Packet 4
+#define AT91C_PIO_PD17       ((unsigned int) 1 << 17) // Pin Controlled by PD17
+#define AT91C_PD17_TD2      ((unsigned int) AT91C_PIO_PD17) //  SSC Transmit Data 2
+#define AT91C_PD17_TPK5     ((unsigned int) AT91C_PIO_PD17) //  ETM Trace Packet 5
+#define AT91C_PIO_PD18       ((unsigned int) 1 << 18) // Pin Controlled by PD18
+#define AT91C_PD18_NPCS1    ((unsigned int) AT91C_PIO_PD18) //  SPI Peripheral Chip Select 1
+#define AT91C_PD18_TPK6     ((unsigned int) AT91C_PIO_PD18) //  ETM Trace Packet 6
+#define AT91C_PIO_PD19       ((unsigned int) 1 << 19) // Pin Controlled by PD19
+#define AT91C_PD19_NPCS2    ((unsigned int) AT91C_PIO_PD19) //  SPI Peripheral Chip Select 2
+#define AT91C_PD19_TPK7     ((unsigned int) AT91C_PIO_PD19) //  ETM Trace Packet 7
+#define AT91C_PIO_PD2        ((unsigned int) 1 <<  2) // Pin Controlled by PD2
+#define AT91C_PD2_ETX2     ((unsigned int) AT91C_PIO_PD2) //  Ethernet MAC Transmit Data 2
+#define AT91C_PIO_PD20       ((unsigned int) 1 << 20) // Pin Controlled by PD20
+#define AT91C_PD20_NPCS3    ((unsigned int) AT91C_PIO_PD20) //  SPI Peripheral Chip Select 3
+#define AT91C_PD20_TPK8     ((unsigned int) AT91C_PIO_PD20) //  ETM Trace Packet 8
+#define AT91C_PIO_PD21       ((unsigned int) 1 << 21) // Pin Controlled by PD21
+#define AT91C_PD21_RTS0     ((unsigned int) AT91C_PIO_PD21) //  Usart 0 Ready To Send
+#define AT91C_PD21_TPK9     ((unsigned int) AT91C_PIO_PD21) //  ETM Trace Packet 9
+#define AT91C_PIO_PD22       ((unsigned int) 1 << 22) // Pin Controlled by PD22
+#define AT91C_PD22_RTS1     ((unsigned int) AT91C_PIO_PD22) //  Usart 0 Ready To Send
+#define AT91C_PD22_TPK10    ((unsigned int) AT91C_PIO_PD22) //  ETM Trace Packet 10
+#define AT91C_PIO_PD23       ((unsigned int) 1 << 23) // Pin Controlled by PD23
+#define AT91C_PD23_RTS2     ((unsigned int) AT91C_PIO_PD23) //  USART 2 Ready To Send
+#define AT91C_PD23_TPK11    ((unsigned int) AT91C_PIO_PD23) //  ETM Trace Packet 11
+#define AT91C_PIO_PD24       ((unsigned int) 1 << 24) // Pin Controlled by PD24
+#define AT91C_PD24_RTS3     ((unsigned int) AT91C_PIO_PD24) //  USART 3 Ready To Send
+#define AT91C_PD24_TPK12    ((unsigned int) AT91C_PIO_PD24) //  ETM Trace Packet 12
+#define AT91C_PIO_PD25       ((unsigned int) 1 << 25) // Pin Controlled by PD25
+#define AT91C_PD25_DTR1     ((unsigned int) AT91C_PIO_PD25) //  USART 1 Data Terminal ready
+#define AT91C_PD25_TPK13    ((unsigned int) AT91C_PIO_PD25) //  ETM Trace Packet 13
+#define AT91C_PIO_PD26       ((unsigned int) 1 << 26) // Pin Controlled by PD26
+#define AT91C_PD26_TPK14    ((unsigned int) AT91C_PIO_PD26) //  ETM Trace Packet 14
+#define AT91C_PIO_PD27       ((unsigned int) 1 << 27) // Pin Controlled by PD27
+#define AT91C_PD27_TPK15    ((unsigned int) AT91C_PIO_PD27) //  ETM Trace Packet 15
+#define AT91C_PIO_PD3        ((unsigned int) 1 <<  3) // Pin Controlled by PD3
+#define AT91C_PD3_ETX3     ((unsigned int) AT91C_PIO_PD3) //  Ethernet MAC Transmit Data 3
+#define AT91C_PIO_PD4        ((unsigned int) 1 <<  4) // Pin Controlled by PD4
+#define AT91C_PD4_ETXEN    ((unsigned int) AT91C_PIO_PD4) //  Ethernet MAC Transmit Enable
+#define AT91C_PIO_PD5        ((unsigned int) 1 <<  5) // Pin Controlled by PD5
+#define AT91C_PD5_ETXER    ((unsigned int) AT91C_PIO_PD5) //  Ethernet MAC Transmikt Coding Error
+#define AT91C_PIO_PD6        ((unsigned int) 1 <<  6) // Pin Controlled by PD6
+#define AT91C_PD6_DTXD     ((unsigned int) AT91C_PIO_PD6) //  DBGU Debug Transmit Data
+#define AT91C_PIO_PD7        ((unsigned int) 1 <<  7) // Pin Controlled by PD7
+#define AT91C_PD7_PCK0     ((unsigned int) AT91C_PIO_PD7) //  PMC Programmable Clock Output 0
+#define AT91C_PD7_TSYNC    ((unsigned int) AT91C_PIO_PD7) //  ETM Synchronization signal
+#define AT91C_PIO_PD8        ((unsigned int) 1 <<  8) // Pin Controlled by PD8
+#define AT91C_PD8_PCK1     ((unsigned int) AT91C_PIO_PD8) //  PMC Programmable Clock Output 1
+#define AT91C_PD8_TCLK     ((unsigned int) AT91C_PIO_PD8) //  ETM Trace Clock signal
+#define AT91C_PIO_PD9        ((unsigned int) 1 <<  9) // Pin Controlled by PD9
+#define AT91C_PD9_PCK2     ((unsigned int) AT91C_PIO_PD9) //  PMC Programmable Clock 2
+#define AT91C_PD9_TPS0     ((unsigned int) AT91C_PIO_PD9) //  ETM ARM9 pipeline status 0
+
+// *****************************************************************************
+//               PERIPHERAL ID DEFINITIONS FOR AT91RM9200
+// *****************************************************************************
+#define AT91C_ID_FIQ    ((unsigned int)  0) // Advanced Interrupt Controller (FIQ)
+#define AT91C_ID_SYS    ((unsigned int)  1) // System Peripheral
+#define AT91C_ID_PIOA   ((unsigned int)  2) // Parallel IO Controller A 
+#define AT91C_ID_PIOB   ((unsigned int)  3) // Parallel IO Controller B
+#define AT91C_ID_PIOC   ((unsigned int)  4) // Parallel IO Controller C
+#define AT91C_ID_PIOD   ((unsigned int)  5) // Parallel IO Controller D
+#define AT91C_ID_US0    ((unsigned int)  6) // USART 0
+#define AT91C_ID_US1    ((unsigned int)  7) // USART 1
+#define AT91C_ID_US2    ((unsigned int)  8) // USART 2
+#define AT91C_ID_US3    ((unsigned int)  9) // USART 3
+#define AT91C_ID_MCI    ((unsigned int) 10) // Multimedia Card Interface
+#define AT91C_ID_UDP    ((unsigned int) 11) // USB Device Port
+#define AT91C_ID_TWI    ((unsigned int) 12) // Two-Wire Interface
+#define AT91C_ID_SPI    ((unsigned int) 13) // Serial Peripheral Interface
+#define AT91C_ID_SSC0   ((unsigned int) 14) // Serial Synchronous Controller 0
+#define AT91C_ID_SSC1   ((unsigned int) 15) // Serial Synchronous Controller 1
+#define AT91C_ID_SSC2   ((unsigned int) 16) // Serial Synchronous Controller 2
+#define AT91C_ID_TC0    ((unsigned int) 17) // Timer Counter 0
+#define AT91C_ID_TC1    ((unsigned int) 18) // Timer Counter 1
+#define AT91C_ID_TC2    ((unsigned int) 19) // Timer Counter 2
+#define AT91C_ID_TC3    ((unsigned int) 20) // Timer Counter 3
+#define AT91C_ID_TC4    ((unsigned int) 21) // Timer Counter 4
+#define AT91C_ID_TC5    ((unsigned int) 22) // Timer Counter 5
+#define AT91C_ID_UHP    ((unsigned int) 23) // USB Host port
+#define AT91C_ID_EMAC   ((unsigned int) 24) // Ethernet MAC
+#define AT91C_ID_IRQ0   ((unsigned int) 25) // Advanced Interrupt Controller (IRQ0)
+#define AT91C_ID_IRQ1   ((unsigned int) 26) // Advanced Interrupt Controller (IRQ1)
+#define AT91C_ID_IRQ2   ((unsigned int) 27) // Advanced Interrupt Controller (IRQ2)
+#define AT91C_ID_IRQ3   ((unsigned int) 28) // Advanced Interrupt Controller (IRQ3)
+#define AT91C_ID_IRQ4   ((unsigned int) 29) // Advanced Interrupt Controller (IRQ4)
+#define AT91C_ID_IRQ5   ((unsigned int) 30) // Advanced Interrupt Controller (IRQ5)
+#define AT91C_ID_IRQ6   ((unsigned int) 31) // Advanced Interrupt Controller (IRQ6)
+
+// *****************************************************************************
+//               BASE ADDRESS DEFINITIONS FOR AT91RM9200
+// *****************************************************************************
+#define AT91C_BASE_SYS       ((AT91PS_SYS) 	0xFFFFF000) // (SYS) Base Address
+#define AT91C_BASE_MC        ((AT91PS_MC) 	0xFFFFFF00) // (MC) Base Address
+#define AT91C_BASE_RTC       ((AT91PS_RTC) 	0xFFFFFE00) // (RTC) Base Address
+#define AT91C_BASE_ST        ((AT91PS_ST) 	0xFFFFFD00) // (ST) Base Address
+#define AT91C_BASE_PMC       ((AT91PS_PMC) 	0xFFFFFC00) // (PMC) Base Address
+#define AT91C_BASE_CKGR      ((AT91PS_CKGR) 	0xFFFFFC20) // (CKGR) Base Address
+#define AT91C_BASE_PIOD      ((AT91PS_PIO) 	0xFFFFFA00) // (PIOD) Base Address
+#define AT91C_BASE_PIOC      ((AT91PS_PIO) 	0xFFFFF800) // (PIOC) Base Address
+#define AT91C_BASE_PIOB      ((AT91PS_PIO) 	0xFFFFF600) // (PIOB) Base Address
+#define AT91C_BASE_PIOA      ((AT91PS_PIO) 	0xFFFFF400) // (PIOA) Base Address
+#define AT91C_BASE_DBGU      ((AT91PS_DBGU) 	0xFFFFF200) // (DBGU) Base Address
+#define AT91C_BASE_PDC_DBGU  ((AT91PS_PDC) 	0xFFFFF300) // (PDC_DBGU) Base Address
+#define AT91C_BASE_AIC       ((AT91PS_AIC) 	0xFFFFF000) // (AIC) Base Address
+#define AT91C_BASE_PDC_SPI   ((AT91PS_PDC) 	0xFFFE0100) // (PDC_SPI) Base Address
+#define AT91C_BASE_SPI       ((AT91PS_SPI) 	0xFFFE0000) // (SPI) Base Address
+#define AT91C_BASE_PDC_SSC2  ((AT91PS_PDC) 	0xFFFD8100) // (PDC_SSC2) Base Address
+#define AT91C_BASE_SSC2      ((AT91PS_SSC) 	0xFFFD8000) // (SSC2) Base Address
+#define AT91C_BASE_PDC_SSC1  ((AT91PS_PDC) 	0xFFFD4100) // (PDC_SSC1) Base Address
+#define AT91C_BASE_SSC1      ((AT91PS_SSC) 	0xFFFD4000) // (SSC1) Base Address
+#define AT91C_BASE_PDC_SSC0  ((AT91PS_PDC) 	0xFFFD0100) // (PDC_SSC0) Base Address
+#define AT91C_BASE_SSC0      ((AT91PS_SSC) 	0xFFFD0000) // (SSC0) Base Address
+#define AT91C_BASE_PDC_US3   ((AT91PS_PDC) 	0xFFFCC100) // (PDC_US3) Base Address
+#define AT91C_BASE_US3       ((AT91PS_USART) 	0xFFFCC000) // (US3) Base Address
+#define AT91C_BASE_PDC_US2   ((AT91PS_PDC) 	0xFFFC8100) // (PDC_US2) Base Address
+#define AT91C_BASE_US2       ((AT91PS_USART) 	0xFFFC8000) // (US2) Base Address
+#define AT91C_BASE_PDC_US1   ((AT91PS_PDC) 	0xFFFC4100) // (PDC_US1) Base Address
+#define AT91C_BASE_US1       ((AT91PS_USART) 	0xFFFC4000) // (US1) Base Address
+#define AT91C_BASE_PDC_US0   ((AT91PS_PDC) 	0xFFFC0100) // (PDC_US0) Base Address
+#define AT91C_BASE_US0       ((AT91PS_USART) 	0xFFFC0000) // (US0) Base Address
+#define AT91C_BASE_TWI       ((AT91PS_TWI) 	0xFFFB8000) // (TWI) Base Address
+#define AT91C_BASE_PDC_MCI   ((AT91PS_PDC) 	0xFFFB4100) // (PDC_MCI) Base Address
+#define AT91C_BASE_MCI       ((AT91PS_MCI) 	0xFFFB4000) // (MCI) Base Address
+#define AT91C_BASE_UDP       ((AT91PS_UDP) 	0xFFFB0000) // (UDP) Base Address
+#define AT91C_BASE_TC5       ((AT91PS_TC) 	0xFFFA4080) // (TC5) Base Address
+#define AT91C_BASE_TC4       ((AT91PS_TC) 	0xFFFA4040) // (TC4) Base Address
+#define AT91C_BASE_TC3       ((AT91PS_TC) 	0xFFFA4000) // (TC3) Base Address
+#define AT91C_BASE_TCB1      ((AT91PS_TCB) 	0xFFFA4080) // (TCB1) Base Address
+#define AT91C_BASE_TC2       ((AT91PS_TC) 	0xFFFA0080) // (TC2) Base Address
+#define AT91C_BASE_TC1       ((AT91PS_TC) 	0xFFFA0040) // (TC1) Base Address
+#define AT91C_BASE_TC0       ((AT91PS_TC) 	0xFFFA0000) // (TC0) Base Address
+#define AT91C_BASE_TCB0      ((AT91PS_TCB) 	0xFFFA0000) // (TCB0) Base Address
+#define AT91C_BASE_UHP       ((AT91PS_UHP) 	0x00300000) // (UHP) Base Address
+#define AT91C_BASE_EMAC      ((AT91PS_EMAC) 	0xFFFBC000) // (EMAC) Base Address
+#define AT91C_BASE_EBI       ((AT91PS_EBI) 	0xFFFFFF60) // (EBI) Base Address
+#define AT91C_BASE_SMC2      ((AT91PS_SMC2) 	0xFFFFFF70) // (SMC2) Base Address
+#define AT91C_BASE_SDRC      ((AT91PS_SDRC) 	0xFFFFFF90) // (SDRC) Base Address
+#define AT91C_BASE_BFC       ((AT91PS_BFC) 	0xFFFFFFC0) // (BFC) Base Address
+
+// *****************************************************************************
+//               MEMORY MAPPING DEFINITIONS FOR AT91RM9200
+// *****************************************************************************
+#define AT91C_ISRAM	 ((char *) 	0x00200000) // Internal SRAM base address
+#define AT91C_ISRAM_SIZE	 ((unsigned int) 0x00004000) // Internal SRAM size in byte (16 Kbyte)
+#define AT91C_IROM 	 ((char *) 	0x00100000) // Internal ROM base address
+#define AT91C_IROM_SIZE	 ((unsigned int) 0x00020000) // Internal ROM size in byte (128 Kbyte)
+
+#endif
diff --git a/target/linux/at91/image/dfboot/src/include/AT91RM9200.inc b/target/linux/at91/image/dfboot/src/include/AT91RM9200.inc
new file mode 100644
index 0000000..670e023
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/include/AT91RM9200.inc
@@ -0,0 +1,2437 @@
+;- ----------------------------------------------------------------------------
+;-          ATMEL Microcontroller Software Support  -  ROUSSET  -
+;- ----------------------------------------------------------------------------
+;-  The software is delivered "AS IS" without warranty or condition of any
+;-  kind, either express, implied or statutory. This includes without
+;-  limitation any warranty or condition with respect to merchantability or
+;-  fitness for any particular purpose, or against the infringements of
+;-  intellectual property rights of others.
+;- ----------------------------------------------------------------------------
+;- File Name           : AT91RM9200.h
+;- Object              : AT91RM9200 definitions
+;- Generated           : AT91 SW Application Group  11/19/2003 (17:20:51)
+;- 
+;- CVS Reference       : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003//
+;- CVS Reference       : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003//
+;- CVS Reference       : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002//
+;- CVS Reference       : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002//
+;- CVS Reference       : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002//
+;- CVS Reference       : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002//
+;- CVS Reference       : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003//
+;- CVS Reference       : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002//
+;- CVS Reference       : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003//
+;- CVS Reference       : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002//
+;- CVS Reference       : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002//
+;- CVS Reference       : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002//
+;- CVS Reference       : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002//
+;- CVS Reference       : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002//
+;- CVS Reference       : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003//
+;- CVS Reference       : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003//
+;- CVS Reference       : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002//
+;- CVS Reference       : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002//
+;- CVS Reference       : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003//
+;- CVS Reference       : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003//
+;- CVS Reference       : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002//
+;- CVS Reference       : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002//
+;- CVS Reference       : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002//
+;- ----------------------------------------------------------------------------
+
+;- Hardware register definition
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR System Peripherals
+;- *****************************************************************************
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Memory Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_MC
+MC_RCR          #  4 ;- MC Remap Control Register
+MC_ASR          #  4 ;- MC Abort Status Register
+MC_AASR         #  4 ;- MC Abort Address Status Register
+                #  4 ;- Reserved
+MC_PUIA         # 64 ;- MC Protection Unit Area
+MC_PUP          #  4 ;- MC Protection Unit Peripherals
+MC_PUER         #  4 ;- MC Protection Unit Enable Register
+;- -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- 
+AT91C_MC_RCB              EQU (0x1:SHL:0) ;- (MC) Remap Command Bit
+;- -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- 
+AT91C_MC_UNDADD           EQU (0x1:SHL:0) ;- (MC) Undefined Addess Abort Status
+AT91C_MC_MISADD           EQU (0x1:SHL:1) ;- (MC) Misaligned Addess Abort Status
+AT91C_MC_MPU              EQU (0x1:SHL:2) ;- (MC) Memory protection Unit Abort Status
+AT91C_MC_ABTSZ            EQU (0x3:SHL:8) ;- (MC) Abort Size Status
+AT91C_MC_ABTSZ_BYTE       EQU (0x0:SHL:8) ;- (MC) Byte
+AT91C_MC_ABTSZ_HWORD      EQU (0x1:SHL:8) ;- (MC) Half-word
+AT91C_MC_ABTSZ_WORD       EQU (0x2:SHL:8) ;- (MC) Word
+AT91C_MC_ABTTYP           EQU (0x3:SHL:10) ;- (MC) Abort Type Status
+AT91C_MC_ABTTYP_DATAR     EQU (0x0:SHL:10) ;- (MC) Data Read
+AT91C_MC_ABTTYP_DATAW     EQU (0x1:SHL:10) ;- (MC) Data Write
+AT91C_MC_ABTTYP_FETCH     EQU (0x2:SHL:10) ;- (MC) Code Fetch
+AT91C_MC_MST0             EQU (0x1:SHL:16) ;- (MC) Master 0 Abort Source
+AT91C_MC_MST1             EQU (0x1:SHL:17) ;- (MC) Master 1 Abort Source
+AT91C_MC_SVMST0           EQU (0x1:SHL:24) ;- (MC) Saved Master 0 Abort Source
+AT91C_MC_SVMST1           EQU (0x1:SHL:25) ;- (MC) Saved Master 1 Abort Source
+;- -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- 
+AT91C_MC_PROT             EQU (0x3:SHL:0) ;- (MC) Protection
+AT91C_MC_PROT_PNAUNA      EQU (0x0) ;- (MC) Privilege: No Access, User: No Access
+AT91C_MC_PROT_PRWUNA      EQU (0x1) ;- (MC) Privilege: Read/Write, User: No Access
+AT91C_MC_PROT_PRWURO      EQU (0x2) ;- (MC) Privilege: Read/Write, User: Read Only
+AT91C_MC_PROT_PRWURW      EQU (0x3) ;- (MC) Privilege: Read/Write, User: Read/Write
+AT91C_MC_SIZE             EQU (0xF:SHL:4) ;- (MC) Internal Area Size
+AT91C_MC_SIZE_1KB         EQU (0x0:SHL:4) ;- (MC) Area size 1KByte
+AT91C_MC_SIZE_2KB         EQU (0x1:SHL:4) ;- (MC) Area size 2KByte
+AT91C_MC_SIZE_4KB         EQU (0x2:SHL:4) ;- (MC) Area size 4KByte
+AT91C_MC_SIZE_8KB         EQU (0x3:SHL:4) ;- (MC) Area size 8KByte
+AT91C_MC_SIZE_16KB        EQU (0x4:SHL:4) ;- (MC) Area size 16KByte
+AT91C_MC_SIZE_32KB        EQU (0x5:SHL:4) ;- (MC) Area size 32KByte
+AT91C_MC_SIZE_64KB        EQU (0x6:SHL:4) ;- (MC) Area size 64KByte
+AT91C_MC_SIZE_128KB       EQU (0x7:SHL:4) ;- (MC) Area size 128KByte
+AT91C_MC_SIZE_256KB       EQU (0x8:SHL:4) ;- (MC) Area size 256KByte
+AT91C_MC_SIZE_512KB       EQU (0x9:SHL:4) ;- (MC) Area size 512KByte
+AT91C_MC_SIZE_1MB         EQU (0xA:SHL:4) ;- (MC) Area size 1MByte
+AT91C_MC_SIZE_2MB         EQU (0xB:SHL:4) ;- (MC) Area size 2MByte
+AT91C_MC_SIZE_4MB         EQU (0xC:SHL:4) ;- (MC) Area size 4MByte
+AT91C_MC_SIZE_8MB         EQU (0xD:SHL:4) ;- (MC) Area size 8MByte
+AT91C_MC_SIZE_16MB        EQU (0xE:SHL:4) ;- (MC) Area size 16MByte
+AT91C_MC_SIZE_64MB        EQU (0xF:SHL:4) ;- (MC) Area size 64MByte
+AT91C_MC_BA               EQU (0x3FFFF:SHL:10) ;- (MC) Internal Area Base Address
+;- -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- 
+;- -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- 
+AT91C_MC_PUEB             EQU (0x1:SHL:0) ;- (MC) Protection Unit enable Bit
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Real-time Clock Alarm and Parallel Load Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_RTC
+RTC_CR          #  4 ;- Control Register
+RTC_MR          #  4 ;- Mode Register
+RTC_TIMR        #  4 ;- Time Register
+RTC_CALR        #  4 ;- Calendar Register
+RTC_TIMALR      #  4 ;- Time Alarm Register
+RTC_CALALR      #  4 ;- Calendar Alarm Register
+RTC_SR          #  4 ;- Status Register
+RTC_SCCR        #  4 ;- Status Clear Command Register
+RTC_IER         #  4 ;- Interrupt Enable Register
+RTC_IDR         #  4 ;- Interrupt Disable Register
+RTC_IMR         #  4 ;- Interrupt Mask Register
+RTC_VER         #  4 ;- Valid Entry Register
+;- -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- 
+AT91C_RTC_UPDTIM          EQU (0x1:SHL:0) ;- (RTC) Update Request Time Register
+AT91C_RTC_UPDCAL          EQU (0x1:SHL:1) ;- (RTC) Update Request Calendar Register
+AT91C_RTC_TIMEVSEL        EQU (0x3:SHL:8) ;- (RTC) Time Event Selection
+AT91C_RTC_TIMEVSEL_MINUTE EQU (0x0:SHL:8) ;- (RTC) Minute change.
+AT91C_RTC_TIMEVSEL_HOUR   EQU (0x1:SHL:8) ;- (RTC) Hour change.
+AT91C_RTC_TIMEVSEL_DAY24  EQU (0x2:SHL:8) ;- (RTC) Every day at midnight.
+AT91C_RTC_TIMEVSEL_DAY12  EQU (0x3:SHL:8) ;- (RTC) Every day at noon.
+AT91C_RTC_CALEVSEL        EQU (0x3:SHL:16) ;- (RTC) Calendar Event Selection
+AT91C_RTC_CALEVSEL_WEEK   EQU (0x0:SHL:16) ;- (RTC) Week change (every Monday at time 00:00:00).
+AT91C_RTC_CALEVSEL_MONTH  EQU (0x1:SHL:16) ;- (RTC) Month change (every 01 of each month at time 00:00:00).
+AT91C_RTC_CALEVSEL_YEAR   EQU (0x2:SHL:16) ;- (RTC) Year change (every January 1 at time 00:00:00).
+;- -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- 
+AT91C_RTC_HRMOD           EQU (0x1:SHL:0) ;- (RTC) 12-24 hour Mode
+;- -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- 
+AT91C_RTC_SEC             EQU (0x7F:SHL:0) ;- (RTC) Current Second
+AT91C_RTC_MIN             EQU (0x7F:SHL:8) ;- (RTC) Current Minute
+AT91C_RTC_HOUR            EQU (0x1F:SHL:16) ;- (RTC) Current Hour
+AT91C_RTC_AMPM            EQU (0x1:SHL:22) ;- (RTC) Ante Meridiem, Post Meridiem Indicator
+;- -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- 
+AT91C_RTC_CENT            EQU (0x3F:SHL:0) ;- (RTC) Current Century
+AT91C_RTC_YEAR            EQU (0xFF:SHL:8) ;- (RTC) Current Year
+AT91C_RTC_MONTH           EQU (0x1F:SHL:16) ;- (RTC) Current Month
+AT91C_RTC_DAY             EQU (0x7:SHL:21) ;- (RTC) Current Day
+AT91C_RTC_DATE            EQU (0x3F:SHL:24) ;- (RTC) Current Date
+;- -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- 
+AT91C_RTC_SECEN           EQU (0x1:SHL:7) ;- (RTC) Second Alarm Enable
+AT91C_RTC_MINEN           EQU (0x1:SHL:15) ;- (RTC) Minute Alarm
+AT91C_RTC_HOUREN          EQU (0x1:SHL:23) ;- (RTC) Current Hour
+;- -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- 
+AT91C_RTC_MONTHEN         EQU (0x1:SHL:23) ;- (RTC) Month Alarm Enable
+AT91C_RTC_DATEEN          EQU (0x1:SHL:31) ;- (RTC) Date Alarm Enable
+;- -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- 
+AT91C_RTC_ACKUPD          EQU (0x1:SHL:0) ;- (RTC) Acknowledge for Update
+AT91C_RTC_ALARM           EQU (0x1:SHL:1) ;- (RTC) Alarm Flag
+AT91C_RTC_SECEV           EQU (0x1:SHL:2) ;- (RTC) Second Event
+AT91C_RTC_TIMEV           EQU (0x1:SHL:3) ;- (RTC) Time Event
+AT91C_RTC_CALEV           EQU (0x1:SHL:4) ;- (RTC) Calendar event
+;- -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- 
+;- -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- 
+;- -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- 
+;- -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- 
+;- -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- 
+AT91C_RTC_NVTIM           EQU (0x1:SHL:0) ;- (RTC) Non valid Time
+AT91C_RTC_NVCAL           EQU (0x1:SHL:1) ;- (RTC) Non valid Calendar
+AT91C_RTC_NVTIMALR        EQU (0x1:SHL:2) ;- (RTC) Non valid time Alarm
+AT91C_RTC_NVCALALR        EQU (0x1:SHL:3) ;- (RTC) Nonvalid Calendar Alarm
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR System Timer Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_ST
+ST_CR           #  4 ;- Control Register
+ST_PIMR         #  4 ;- Period Interval Mode Register
+ST_WDMR         #  4 ;- Watchdog Mode Register
+ST_RTMR         #  4 ;- Real-time Mode Register
+ST_SR           #  4 ;- Status Register
+ST_IER          #  4 ;- Interrupt Enable Register
+ST_IDR          #  4 ;- Interrupt Disable Register
+ST_IMR          #  4 ;- Interrupt Mask Register
+ST_RTAR         #  4 ;- Real-time Alarm Register
+ST_CRTR         #  4 ;- Current Real-time Register
+;- -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- 
+AT91C_ST_WDRST            EQU (0x1:SHL:0) ;- (ST) Watchdog Timer Restart
+;- -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- 
+AT91C_ST_PIV              EQU (0xFFFF:SHL:0) ;- (ST) Watchdog Timer Restart
+;- -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- 
+AT91C_ST_WDV              EQU (0xFFFF:SHL:0) ;- (ST) Watchdog Timer Restart
+AT91C_ST_RSTEN            EQU (0x1:SHL:16) ;- (ST) Reset Enable
+AT91C_ST_EXTEN            EQU (0x1:SHL:17) ;- (ST) External Signal Assertion Enable
+;- -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- 
+AT91C_ST_RTPRES           EQU (0xFFFF:SHL:0) ;- (ST) Real-time Timer Prescaler Value
+;- -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- 
+AT91C_ST_PITS             EQU (0x1:SHL:0) ;- (ST) Period Interval Timer Interrupt
+AT91C_ST_WDOVF            EQU (0x1:SHL:1) ;- (ST) Watchdog Overflow
+AT91C_ST_RTTINC           EQU (0x1:SHL:2) ;- (ST) Real-time Timer Increment
+AT91C_ST_ALMS             EQU (0x1:SHL:3) ;- (ST) Alarm Status
+;- -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- 
+;- -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- 
+;- -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- 
+;- -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- 
+AT91C_ST_ALMV             EQU (0xFFFFF:SHL:0) ;- (ST) Alarm Value Value
+;- -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- 
+AT91C_ST_CRTV             EQU (0xFFFFF:SHL:0) ;- (ST) Current Real-time Value
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Power Management Controler
+;- *****************************************************************************
+                ^ 0 ;- AT91S_PMC
+PMC_SCER        #  4 ;- System Clock Enable Register
+PMC_SCDR        #  4 ;- System Clock Disable Register
+PMC_SCSR        #  4 ;- System Clock Status Register
+                #  4 ;- Reserved
+PMC_PCER        #  4 ;- Peripheral Clock Enable Register
+PMC_PCDR        #  4 ;- Peripheral Clock Disable Register
+PMC_PCSR        #  4 ;- Peripheral Clock Status Register
+                # 20 ;- Reserved
+PMC_MCKR        #  4 ;- Master Clock Register
+                # 12 ;- Reserved
+PMC_PCKR        # 32 ;- Programmable Clock Register
+PMC_IER         #  4 ;- Interrupt Enable Register
+PMC_IDR         #  4 ;- Interrupt Disable Register
+PMC_SR          #  4 ;- Status Register
+PMC_IMR         #  4 ;- Interrupt Mask Register
+;- -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- 
+AT91C_PMC_PCK             EQU (0x1:SHL:0) ;- (PMC) Processor Clock
+AT91C_PMC_UDP             EQU (0x1:SHL:1) ;- (PMC) USB Device Port Clock
+AT91C_PMC_MCKUDP          EQU (0x1:SHL:2) ;- (PMC) USB Device Port Master Clock Automatic Disable on Suspend
+AT91C_PMC_UHP             EQU (0x1:SHL:4) ;- (PMC) USB Host Port Clock
+AT91C_PMC_PCK0            EQU (0x1:SHL:8) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK1            EQU (0x1:SHL:9) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK2            EQU (0x1:SHL:10) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK3            EQU (0x1:SHL:11) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK4            EQU (0x1:SHL:12) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK5            EQU (0x1:SHL:13) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK6            EQU (0x1:SHL:14) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK7            EQU (0x1:SHL:15) ;- (PMC) Programmable Clock Output
+;- -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- 
+;- -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- 
+;- -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- 
+AT91C_PMC_CSS             EQU (0x3:SHL:0) ;- (PMC) Programmable Clock Selection
+AT91C_PMC_CSS_SLOW_CLK    EQU (0x0) ;- (PMC) Slow Clock is selected
+AT91C_PMC_CSS_MAIN_CLK    EQU (0x1) ;- (PMC) Main Clock is selected
+AT91C_PMC_CSS_PLLA_CLK    EQU (0x2) ;- (PMC) Clock from PLL A is selected
+AT91C_PMC_CSS_PLLB_CLK    EQU (0x3) ;- (PMC) Clock from PLL B is selected
+AT91C_PMC_PRES            EQU (0x7:SHL:2) ;- (PMC) Programmable Clock Prescaler
+AT91C_PMC_PRES_CLK        EQU (0x0:SHL:2) ;- (PMC) Selected clock
+AT91C_PMC_PRES_CLK_2      EQU (0x1:SHL:2) ;- (PMC) Selected clock divided by 2
+AT91C_PMC_PRES_CLK_4      EQU (0x2:SHL:2) ;- (PMC) Selected clock divided by 4
+AT91C_PMC_PRES_CLK_8      EQU (0x3:SHL:2) ;- (PMC) Selected clock divided by 8
+AT91C_PMC_PRES_CLK_16     EQU (0x4:SHL:2) ;- (PMC) Selected clock divided by 16
+AT91C_PMC_PRES_CLK_32     EQU (0x5:SHL:2) ;- (PMC) Selected clock divided by 32
+AT91C_PMC_PRES_CLK_64     EQU (0x6:SHL:2) ;- (PMC) Selected clock divided by 64
+AT91C_PMC_MDIV            EQU (0x3:SHL:8) ;- (PMC) Master Clock Division
+AT91C_PMC_MDIV_1          EQU (0x0:SHL:8) ;- (PMC) The master clock and the processor clock are the same
+AT91C_PMC_MDIV_2          EQU (0x1:SHL:8) ;- (PMC) The processor clock is twice as fast as the master clock
+AT91C_PMC_MDIV_3          EQU (0x2:SHL:8) ;- (PMC) The processor clock is three times faster than the master clock
+AT91C_PMC_MDIV_4          EQU (0x3:SHL:8) ;- (PMC) The processor clock is four times faster than the master clock
+;- -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- 
+;- -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- 
+AT91C_PMC_MOSCS           EQU (0x1:SHL:0) ;- (PMC) MOSC Status/Enable/Disable/Mask
+AT91C_PMC_LOCKA           EQU (0x1:SHL:1) ;- (PMC) PLL A Status/Enable/Disable/Mask
+AT91C_PMC_LOCKB           EQU (0x1:SHL:2) ;- (PMC) PLL B Status/Enable/Disable/Mask
+AT91C_PMC_MCKRDY          EQU (0x1:SHL:3) ;- (PMC) MCK_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK0RDY         EQU (0x1:SHL:8) ;- (PMC) PCK0_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK1RDY         EQU (0x1:SHL:9) ;- (PMC) PCK1_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK2RDY         EQU (0x1:SHL:10) ;- (PMC) PCK2_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK3RDY         EQU (0x1:SHL:11) ;- (PMC) PCK3_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK4RDY         EQU (0x1:SHL:12) ;- (PMC) PCK4_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK5RDY         EQU (0x1:SHL:13) ;- (PMC) PCK5_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK6RDY         EQU (0x1:SHL:14) ;- (PMC) PCK6_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK7RDY         EQU (0x1:SHL:15) ;- (PMC) PCK7_RDY Status/Enable/Disable/Mask
+;- -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- 
+;- -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- 
+;- -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Clock Generator Controler
+;- *****************************************************************************
+                ^ 0 ;- AT91S_CKGR
+CKGR_MOR        #  4 ;- Main Oscillator Register
+CKGR_MCFR       #  4 ;- Main Clock  Frequency Register
+CKGR_PLLAR      #  4 ;- PLL A Register
+CKGR_PLLBR      #  4 ;- PLL B Register
+;- -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- 
+AT91C_CKGR_MOSCEN         EQU (0x1:SHL:0) ;- (CKGR) Main Oscillator Enable
+AT91C_CKGR_OSCTEST        EQU (0x1:SHL:1) ;- (CKGR) Oscillator Test
+AT91C_CKGR_OSCOUNT        EQU (0xFF:SHL:8) ;- (CKGR) Main Oscillator Start-up Time
+;- -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- 
+AT91C_CKGR_MAINF          EQU (0xFFFF:SHL:0) ;- (CKGR) Main Clock Frequency
+AT91C_CKGR_MAINRDY        EQU (0x1:SHL:16) ;- (CKGR) Main Clock Ready
+;- -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- 
+AT91C_CKGR_DIVA           EQU (0xFF:SHL:0) ;- (CKGR) Divider Selected
+AT91C_CKGR_DIVA_0         EQU (0x0) ;- (CKGR) Divider output is 0
+AT91C_CKGR_DIVA_BYPASS    EQU (0x1) ;- (CKGR) Divider is bypassed
+AT91C_CKGR_PLLACOUNT      EQU (0x3F:SHL:8) ;- (CKGR) PLL A Counter
+AT91C_CKGR_OUTA           EQU (0x3:SHL:14) ;- (CKGR) PLL A Output Frequency Range
+AT91C_CKGR_OUTA_0         EQU (0x0:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet
+AT91C_CKGR_OUTA_1         EQU (0x1:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet
+AT91C_CKGR_OUTA_2         EQU (0x2:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet
+AT91C_CKGR_OUTA_3         EQU (0x3:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet
+AT91C_CKGR_MULA           EQU (0x7FF:SHL:16) ;- (CKGR) PLL A Multiplier
+AT91C_CKGR_SRCA           EQU (0x1:SHL:29) ;- (CKGR) PLL A Source
+;- -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- 
+AT91C_CKGR_DIVB           EQU (0xFF:SHL:0) ;- (CKGR) Divider Selected
+AT91C_CKGR_DIVB_0         EQU (0x0) ;- (CKGR) Divider output is 0
+AT91C_CKGR_DIVB_BYPASS    EQU (0x1) ;- (CKGR) Divider is bypassed
+AT91C_CKGR_PLLBCOUNT      EQU (0x3F:SHL:8) ;- (CKGR) PLL B Counter
+AT91C_CKGR_OUTB           EQU (0x3:SHL:14) ;- (CKGR) PLL B Output Frequency Range
+AT91C_CKGR_OUTB_0         EQU (0x0:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet
+AT91C_CKGR_OUTB_1         EQU (0x1:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet
+AT91C_CKGR_OUTB_2         EQU (0x2:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet
+AT91C_CKGR_OUTB_3         EQU (0x3:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet
+AT91C_CKGR_MULB           EQU (0x7FF:SHL:16) ;- (CKGR) PLL B Multiplier
+AT91C_CKGR_USB_96M        EQU (0x1:SHL:28) ;- (CKGR) Divider for USB Ports
+AT91C_CKGR_USB_PLL        EQU (0x1:SHL:29) ;- (CKGR) PLL Use
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Parallel Input Output Controler
+;- *****************************************************************************
+                ^ 0 ;- AT91S_PIO
+PIO_PER         #  4 ;- PIO Enable Register
+PIO_PDR         #  4 ;- PIO Disable Register
+PIO_PSR         #  4 ;- PIO Status Register
+                #  4 ;- Reserved
+PIO_OER         #  4 ;- Output Enable Register
+PIO_ODR         #  4 ;- Output Disable Registerr
+PIO_OSR         #  4 ;- Output Status Register
+                #  4 ;- Reserved
+PIO_IFER        #  4 ;- Input Filter Enable Register
+PIO_IFDR        #  4 ;- Input Filter Disable Register
+PIO_IFSR        #  4 ;- Input Filter Status Register
+                #  4 ;- Reserved
+PIO_SODR        #  4 ;- Set Output Data Register
+PIO_CODR        #  4 ;- Clear Output Data Register
+PIO_ODSR        #  4 ;- Output Data Status Register
+PIO_PDSR        #  4 ;- Pin Data Status Register
+PIO_IER         #  4 ;- Interrupt Enable Register
+PIO_IDR         #  4 ;- Interrupt Disable Register
+PIO_IMR         #  4 ;- Interrupt Mask Register
+PIO_ISR         #  4 ;- Interrupt Status Register
+PIO_MDER        #  4 ;- Multi-driver Enable Register
+PIO_MDDR        #  4 ;- Multi-driver Disable Register
+PIO_MDSR        #  4 ;- Multi-driver Status Register
+                #  4 ;- Reserved
+PIO_PPUDR       #  4 ;- Pull-up Disable Register
+PIO_PPUER       #  4 ;- Pull-up Enable Register
+PIO_PPUSR       #  4 ;- Pad Pull-up Status Register
+                #  4 ;- Reserved
+PIO_ASR         #  4 ;- Select A Register
+PIO_BSR         #  4 ;- Select B Register
+PIO_ABSR        #  4 ;- AB Select Status Register
+                # 36 ;- Reserved
+PIO_OWER        #  4 ;- Output Write Enable Register
+PIO_OWDR        #  4 ;- Output Write Disable Register
+PIO_OWSR        #  4 ;- Output Write Status Register
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Debug Unit
+;- *****************************************************************************
+                ^ 0 ;- AT91S_DBGU
+DBGU_CR         #  4 ;- Control Register
+DBGU_MR         #  4 ;- Mode Register
+DBGU_IER        #  4 ;- Interrupt Enable Register
+DBGU_IDR        #  4 ;- Interrupt Disable Register
+DBGU_IMR        #  4 ;- Interrupt Mask Register
+DBGU_CSR        #  4 ;- Channel Status Register
+DBGU_RHR        #  4 ;- Receiver Holding Register
+DBGU_THR        #  4 ;- Transmitter Holding Register
+DBGU_BRGR       #  4 ;- Baud Rate Generator Register
+                # 28 ;- Reserved
+DBGU_C1R        #  4 ;- Chip ID1 Register
+DBGU_C2R        #  4 ;- Chip ID2 Register
+DBGU_FNTR       #  4 ;- Force NTRST Register
+                # 180 ;- Reserved
+DBGU_RPR        #  4 ;- Receive Pointer Register
+DBGU_RCR        #  4 ;- Receive Counter Register
+DBGU_TPR        #  4 ;- Transmit Pointer Register
+DBGU_TCR        #  4 ;- Transmit Counter Register
+DBGU_RNPR       #  4 ;- Receive Next Pointer Register
+DBGU_RNCR       #  4 ;- Receive Next Counter Register
+DBGU_TNPR       #  4 ;- Transmit Next Pointer Register
+DBGU_TNCR       #  4 ;- Transmit Next Counter Register
+DBGU_PTCR       #  4 ;- PDC Transfer Control Register
+DBGU_PTSR       #  4 ;- PDC Transfer Status Register
+;- -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- 
+AT91C_US_RSTRX            EQU (0x1:SHL:2) ;- (DBGU) Reset Receiver
+AT91C_US_RSTTX            EQU (0x1:SHL:3) ;- (DBGU) Reset Transmitter
+AT91C_US_RXEN             EQU (0x1:SHL:4) ;- (DBGU) Receiver Enable
+AT91C_US_RXDIS            EQU (0x1:SHL:5) ;- (DBGU) Receiver Disable
+AT91C_US_TXEN             EQU (0x1:SHL:6) ;- (DBGU) Transmitter Enable
+AT91C_US_TXDIS            EQU (0x1:SHL:7) ;- (DBGU) Transmitter Disable
+;- -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- 
+AT91C_US_PAR              EQU (0x7:SHL:9) ;- (DBGU) Parity type
+AT91C_US_PAR_EVEN         EQU (0x0:SHL:9) ;- (DBGU) Even Parity
+AT91C_US_PAR_ODD          EQU (0x1:SHL:9) ;- (DBGU) Odd Parity
+AT91C_US_PAR_SPACE        EQU (0x2:SHL:9) ;- (DBGU) Parity forced to 0 (Space)
+AT91C_US_PAR_MARK         EQU (0x3:SHL:9) ;- (DBGU) Parity forced to 1 (Mark)
+AT91C_US_PAR_NONE         EQU (0x4:SHL:9) ;- (DBGU) No Parity
+AT91C_US_PAR_MULTI_DROP   EQU (0x6:SHL:9) ;- (DBGU) Multi-drop mode
+AT91C_US_CHMODE           EQU (0x3:SHL:14) ;- (DBGU) Channel Mode
+AT91C_US_CHMODE_NORMAL    EQU (0x0:SHL:14) ;- (DBGU) Normal Mode: The USART channel operates as an RX/TX USART.
+AT91C_US_CHMODE_AUTO      EQU (0x1:SHL:14) ;- (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin.
+AT91C_US_CHMODE_LOCAL     EQU (0x2:SHL:14) ;- (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal.
+AT91C_US_CHMODE_REMOTE    EQU (0x3:SHL:14) ;- (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin.
+;- -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
+AT91C_US_RXRDY            EQU (0x1:SHL:0) ;- (DBGU) RXRDY Interrupt
+AT91C_US_TXRDY            EQU (0x1:SHL:1) ;- (DBGU) TXRDY Interrupt
+AT91C_US_ENDRX            EQU (0x1:SHL:3) ;- (DBGU) End of Receive Transfer Interrupt
+AT91C_US_ENDTX            EQU (0x1:SHL:4) ;- (DBGU) End of Transmit Interrupt
+AT91C_US_OVRE             EQU (0x1:SHL:5) ;- (DBGU) Overrun Interrupt
+AT91C_US_FRAME            EQU (0x1:SHL:6) ;- (DBGU) Framing Error Interrupt
+AT91C_US_PARE             EQU (0x1:SHL:7) ;- (DBGU) Parity Error Interrupt
+AT91C_US_TXEMPTY          EQU (0x1:SHL:9) ;- (DBGU) TXEMPTY Interrupt
+AT91C_US_TXBUFE           EQU (0x1:SHL:11) ;- (DBGU) TXBUFE Interrupt
+AT91C_US_RXBUFF           EQU (0x1:SHL:12) ;- (DBGU) RXBUFF Interrupt
+AT91C_US_COMM_TX          EQU (0x1:SHL:30) ;- (DBGU) COMM_TX Interrupt
+AT91C_US_COMM_RX          EQU (0x1:SHL:31) ;- (DBGU) COMM_RX Interrupt
+;- -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
+;- -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
+;- -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- 
+;- -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- 
+AT91C_US_FORCE_NTRST      EQU (0x1:SHL:0) ;- (DBGU) Force NTRST in JTAG
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Peripheral Data Controller
+;- *****************************************************************************
+                ^ 0 ;- AT91S_PDC
+PDC_RPR         #  4 ;- Receive Pointer Register
+PDC_RCR         #  4 ;- Receive Counter Register
+PDC_TPR         #  4 ;- Transmit Pointer Register
+PDC_TCR         #  4 ;- Transmit Counter Register
+PDC_RNPR        #  4 ;- Receive Next Pointer Register
+PDC_RNCR        #  4 ;- Receive Next Counter Register
+PDC_TNPR        #  4 ;- Transmit Next Pointer Register
+PDC_TNCR        #  4 ;- Transmit Next Counter Register
+PDC_PTCR        #  4 ;- PDC Transfer Control Register
+PDC_PTSR        #  4 ;- PDC Transfer Status Register
+;- -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- 
+AT91C_PDC_RXTEN           EQU (0x1:SHL:0) ;- (PDC) Receiver Transfer Enable
+AT91C_PDC_RXTDIS          EQU (0x1:SHL:1) ;- (PDC) Receiver Transfer Disable
+AT91C_PDC_TXTEN           EQU (0x1:SHL:8) ;- (PDC) Transmitter Transfer Enable
+AT91C_PDC_TXTDIS          EQU (0x1:SHL:9) ;- (PDC) Transmitter Transfer Disable
+;- -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Advanced Interrupt Controller
+;- *****************************************************************************
+                ^ 0 ;- AT91S_AIC
+AIC_SMR         # 128 ;- Source Mode Register
+AIC_SVR         # 128 ;- Source Vector Register
+AIC_IVR         #  4 ;- IRQ Vector Register
+AIC_FVR         #  4 ;- FIQ Vector Register
+AIC_ISR         #  4 ;- Interrupt Status Register
+AIC_IPR         #  4 ;- Interrupt Pending Register
+AIC_IMR         #  4 ;- Interrupt Mask Register
+AIC_CISR        #  4 ;- Core Interrupt Status Register
+                #  8 ;- Reserved
+AIC_IECR        #  4 ;- Interrupt Enable Command Register
+AIC_IDCR        #  4 ;- Interrupt Disable Command Register
+AIC_ICCR        #  4 ;- Interrupt Clear Command Register
+AIC_ISCR        #  4 ;- Interrupt Set Command Register
+AIC_EOICR       #  4 ;- End of Interrupt Command Register
+AIC_SPU         #  4 ;- Spurious Vector Register
+AIC_DCR         #  4 ;- Debug Control Register (Protect)
+                #  4 ;- Reserved
+AIC_FFER        #  4 ;- Fast Forcing Enable Register
+AIC_FFDR        #  4 ;- Fast Forcing Disable Register
+AIC_FFSR        #  4 ;- Fast Forcing Status Register
+;- -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- 
+AT91C_AIC_PRIOR           EQU (0x7:SHL:0) ;- (AIC) Priority Level
+AT91C_AIC_PRIOR_LOWEST    EQU (0x0) ;- (AIC) Lowest priority level
+AT91C_AIC_PRIOR_HIGHEST   EQU (0x7) ;- (AIC) Highest priority level
+AT91C_AIC_SRCTYPE         EQU (0x3:SHL:5) ;- (AIC) Interrupt Source Type
+AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE EQU (0x0:SHL:5) ;- (AIC) Internal Sources Code Label Level Sensitive
+AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED EQU (0x1:SHL:5) ;- (AIC) Internal Sources Code Label Edge triggered
+AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL EQU (0x2:SHL:5) ;- (AIC) External Sources Code Label High-level Sensitive
+AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE EQU (0x3:SHL:5) ;- (AIC) External Sources Code Label Positive Edge triggered
+;- -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- 
+AT91C_AIC_NFIQ            EQU (0x1:SHL:0) ;- (AIC) NFIQ Status
+AT91C_AIC_NIRQ            EQU (0x1:SHL:1) ;- (AIC) NIRQ Status
+;- -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- 
+AT91C_AIC_DCR_PROT        EQU (0x1:SHL:0) ;- (AIC) Protection Mode
+AT91C_AIC_DCR_GMSK        EQU (0x1:SHL:1) ;- (AIC) General Mask
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Serial Parallel Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_SPI
+SPI_CR          #  4 ;- Control Register
+SPI_MR          #  4 ;- Mode Register
+SPI_RDR         #  4 ;- Receive Data Register
+SPI_TDR         #  4 ;- Transmit Data Register
+SPI_SR          #  4 ;- Status Register
+SPI_IER         #  4 ;- Interrupt Enable Register
+SPI_IDR         #  4 ;- Interrupt Disable Register
+SPI_IMR         #  4 ;- Interrupt Mask Register
+                # 16 ;- Reserved
+SPI_CSR         # 16 ;- Chip Select Register
+                # 192 ;- Reserved
+SPI_RPR         #  4 ;- Receive Pointer Register
+SPI_RCR         #  4 ;- Receive Counter Register
+SPI_TPR         #  4 ;- Transmit Pointer Register
+SPI_TCR         #  4 ;- Transmit Counter Register
+SPI_RNPR        #  4 ;- Receive Next Pointer Register
+SPI_RNCR        #  4 ;- Receive Next Counter Register
+SPI_TNPR        #  4 ;- Transmit Next Pointer Register
+SPI_TNCR        #  4 ;- Transmit Next Counter Register
+SPI_PTCR        #  4 ;- PDC Transfer Control Register
+SPI_PTSR        #  4 ;- PDC Transfer Status Register
+;- -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- 
+AT91C_SPI_SPIEN           EQU (0x1:SHL:0) ;- (SPI) SPI Enable
+AT91C_SPI_SPIDIS          EQU (0x1:SHL:1) ;- (SPI) SPI Disable
+AT91C_SPI_SWRST           EQU (0x1:SHL:7) ;- (SPI) SPI Software reset
+;- -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- 
+AT91C_SPI_MSTR            EQU (0x1:SHL:0) ;- (SPI) Master/Slave Mode
+AT91C_SPI_PS              EQU (0x1:SHL:1) ;- (SPI) Peripheral Select
+AT91C_SPI_PS_FIXED        EQU (0x0:SHL:1) ;- (SPI) Fixed Peripheral Select
+AT91C_SPI_PS_VARIABLE     EQU (0x1:SHL:1) ;- (SPI) Variable Peripheral Select
+AT91C_SPI_PCSDEC          EQU (0x1:SHL:2) ;- (SPI) Chip Select Decode
+AT91C_SPI_DIV32           EQU (0x1:SHL:3) ;- (SPI) Clock Selection
+AT91C_SPI_MODFDIS         EQU (0x1:SHL:4) ;- (SPI) Mode Fault Detection
+AT91C_SPI_LLB             EQU (0x1:SHL:7) ;- (SPI) Clock Selection
+AT91C_SPI_PCS             EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select
+AT91C_SPI_DLYBCS          EQU (0xFF:SHL:24) ;- (SPI) Delay Between Chip Selects
+;- -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- 
+AT91C_SPI_RD              EQU (0xFFFF:SHL:0) ;- (SPI) Receive Data
+AT91C_SPI_RPCS            EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status
+;- -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- 
+AT91C_SPI_TD              EQU (0xFFFF:SHL:0) ;- (SPI) Transmit Data
+AT91C_SPI_TPCS            EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status
+;- -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- 
+AT91C_SPI_RDRF            EQU (0x1:SHL:0) ;- (SPI) Receive Data Register Full
+AT91C_SPI_TDRE            EQU (0x1:SHL:1) ;- (SPI) Transmit Data Register Empty
+AT91C_SPI_MODF            EQU (0x1:SHL:2) ;- (SPI) Mode Fault Error
+AT91C_SPI_OVRES           EQU (0x1:SHL:3) ;- (SPI) Overrun Error Status
+AT91C_SPI_SPENDRX         EQU (0x1:SHL:4) ;- (SPI) End of Receiver Transfer
+AT91C_SPI_SPENDTX         EQU (0x1:SHL:5) ;- (SPI) End of Receiver Transfer
+AT91C_SPI_RXBUFF          EQU (0x1:SHL:6) ;- (SPI) RXBUFF Interrupt
+AT91C_SPI_TXBUFE          EQU (0x1:SHL:7) ;- (SPI) TXBUFE Interrupt
+AT91C_SPI_SPIENS          EQU (0x1:SHL:16) ;- (SPI) Enable Status
+;- -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- 
+;- -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- 
+;- -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- 
+;- -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- 
+AT91C_SPI_CPOL            EQU (0x1:SHL:0) ;- (SPI) Clock Polarity
+AT91C_SPI_NCPHA           EQU (0x1:SHL:1) ;- (SPI) Clock Phase
+AT91C_SPI_BITS            EQU (0xF:SHL:4) ;- (SPI) Bits Per Transfer
+AT91C_SPI_BITS_8          EQU (0x0:SHL:4) ;- (SPI) 8 Bits Per transfer
+AT91C_SPI_BITS_9          EQU (0x1:SHL:4) ;- (SPI) 9 Bits Per transfer
+AT91C_SPI_BITS_10         EQU (0x2:SHL:4) ;- (SPI) 10 Bits Per transfer
+AT91C_SPI_BITS_11         EQU (0x3:SHL:4) ;- (SPI) 11 Bits Per transfer
+AT91C_SPI_BITS_12         EQU (0x4:SHL:4) ;- (SPI) 12 Bits Per transfer
+AT91C_SPI_BITS_13         EQU (0x5:SHL:4) ;- (SPI) 13 Bits Per transfer
+AT91C_SPI_BITS_14         EQU (0x6:SHL:4) ;- (SPI) 14 Bits Per transfer
+AT91C_SPI_BITS_15         EQU (0x7:SHL:4) ;- (SPI) 15 Bits Per transfer
+AT91C_SPI_BITS_16         EQU (0x8:SHL:4) ;- (SPI) 16 Bits Per transfer
+AT91C_SPI_SCBR            EQU (0xFF:SHL:8) ;- (SPI) Serial Clock Baud Rate
+AT91C_SPI_DLYBS           EQU (0xFF:SHL:16) ;- (SPI) Serial Clock Baud Rate
+AT91C_SPI_DLYBCT          EQU (0xFF:SHL:24) ;- (SPI) Delay Between Consecutive Transfers
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Synchronous Serial Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_SSC
+SSC_CR          #  4 ;- Control Register
+SSC_CMR         #  4 ;- Clock Mode Register
+                #  8 ;- Reserved
+SSC_RCMR        #  4 ;- Receive Clock ModeRegister
+SSC_RFMR        #  4 ;- Receive Frame Mode Register
+SSC_TCMR        #  4 ;- Transmit Clock Mode Register
+SSC_TFMR        #  4 ;- Transmit Frame Mode Register
+SSC_RHR         #  4 ;- Receive Holding Register
+SSC_THR         #  4 ;- Transmit Holding Register
+                #  8 ;- Reserved
+SSC_RSHR        #  4 ;- Receive Sync Holding Register
+SSC_TSHR        #  4 ;- Transmit Sync Holding Register
+SSC_RC0R        #  4 ;- Receive Compare 0 Register
+SSC_RC1R        #  4 ;- Receive Compare 1 Register
+SSC_SR          #  4 ;- Status Register
+SSC_IER         #  4 ;- Interrupt Enable Register
+SSC_IDR         #  4 ;- Interrupt Disable Register
+SSC_IMR         #  4 ;- Interrupt Mask Register
+                # 176 ;- Reserved
+SSC_RPR         #  4 ;- Receive Pointer Register
+SSC_RCR         #  4 ;- Receive Counter Register
+SSC_TPR         #  4 ;- Transmit Pointer Register
+SSC_TCR         #  4 ;- Transmit Counter Register
+SSC_RNPR        #  4 ;- Receive Next Pointer Register
+SSC_RNCR        #  4 ;- Receive Next Counter Register
+SSC_TNPR        #  4 ;- Transmit Next Pointer Register
+SSC_TNCR        #  4 ;- Transmit Next Counter Register
+SSC_PTCR        #  4 ;- PDC Transfer Control Register
+SSC_PTSR        #  4 ;- PDC Transfer Status Register
+;- -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- 
+AT91C_SSC_RXEN            EQU (0x1:SHL:0) ;- (SSC) Receive Enable
+AT91C_SSC_RXDIS           EQU (0x1:SHL:1) ;- (SSC) Receive Disable
+AT91C_SSC_TXEN            EQU (0x1:SHL:8) ;- (SSC) Transmit Enable
+AT91C_SSC_TXDIS           EQU (0x1:SHL:9) ;- (SSC) Transmit Disable
+AT91C_SSC_SWRST           EQU (0x1:SHL:15) ;- (SSC) Software Reset
+;- -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- 
+AT91C_SSC_CKS             EQU (0x3:SHL:0) ;- (SSC) Receive/Transmit Clock Selection
+AT91C_SSC_CKS_DIV         EQU (0x0) ;- (SSC) Divided Clock
+AT91C_SSC_CKS_TK          EQU (0x1) ;- (SSC) TK Clock signal
+AT91C_SSC_CKS_RK          EQU (0x2) ;- (SSC) RK pin
+AT91C_SSC_CKO             EQU (0x7:SHL:2) ;- (SSC) Receive/Transmit Clock Output Mode Selection
+AT91C_SSC_CKO_NONE        EQU (0x0:SHL:2) ;- (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only
+AT91C_SSC_CKO_CONTINOUS   EQU (0x1:SHL:2) ;- (SSC) Continuous Receive/Transmit Clock RK pin: Output
+AT91C_SSC_CKO_DATA_TX     EQU (0x2:SHL:2) ;- (SSC) Receive/Transmit Clock only during data transfers RK pin: Output
+AT91C_SSC_CKI             EQU (0x1:SHL:5) ;- (SSC) Receive/Transmit Clock Inversion
+AT91C_SSC_CKG             EQU (0x3:SHL:6) ;- (SSC) Receive/Transmit Clock Gating Selection
+AT91C_SSC_CKG_NONE        EQU (0x0:SHL:6) ;- (SSC) Receive/Transmit Clock Gating: None, continuous clock
+AT91C_SSC_CKG_LOW         EQU (0x1:SHL:6) ;- (SSC) Receive/Transmit Clock enabled only if RF Low
+AT91C_SSC_CKG_HIGH        EQU (0x2:SHL:6) ;- (SSC) Receive/Transmit Clock enabled only if RF High
+AT91C_SSC_START           EQU (0xF:SHL:8) ;- (SSC) Receive/Transmit Start Selection
+AT91C_SSC_START_CONTINOUS EQU (0x0:SHL:8) ;- (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
+AT91C_SSC_START_TX        EQU (0x1:SHL:8) ;- (SSC) Transmit/Receive start
+AT91C_SSC_START_LOW_RF    EQU (0x2:SHL:8) ;- (SSC) Detection of a low level on RF input
+AT91C_SSC_START_HIGH_RF   EQU (0x3:SHL:8) ;- (SSC) Detection of a high level on RF input
+AT91C_SSC_START_FALL_RF   EQU (0x4:SHL:8) ;- (SSC) Detection of a falling edge on RF input
+AT91C_SSC_START_RISE_RF   EQU (0x5:SHL:8) ;- (SSC) Detection of a rising edge on RF input
+AT91C_SSC_START_LEVEL_RF  EQU (0x6:SHL:8) ;- (SSC) Detection of any level change on RF input
+AT91C_SSC_START_EDGE_RF   EQU (0x7:SHL:8) ;- (SSC) Detection of any edge on RF input
+AT91C_SSC_START_0         EQU (0x8:SHL:8) ;- (SSC) Compare 0
+AT91C_SSC_STOP            EQU (0x1:SHL:12) ;- (SSC) Receive Stop Selection
+AT91C_SSC_STTOUT          EQU (0x1:SHL:15) ;- (SSC) Receive/Transmit Start Output Selection
+AT91C_SSC_STTDLY          EQU (0xFF:SHL:16) ;- (SSC) Receive/Transmit Start Delay
+AT91C_SSC_PERIOD          EQU (0xFF:SHL:24) ;- (SSC) Receive/Transmit Period Divider Selection
+;- -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- 
+AT91C_SSC_DATLEN          EQU (0x1F:SHL:0) ;- (SSC) Data Length
+AT91C_SSC_LOOP            EQU (0x1:SHL:5) ;- (SSC) Loop Mode
+AT91C_SSC_MSBF            EQU (0x1:SHL:7) ;- (SSC) Most Significant Bit First
+AT91C_SSC_DATNB           EQU (0xF:SHL:8) ;- (SSC) Data Number per Frame
+AT91C_SSC_FSLEN           EQU (0xF:SHL:16) ;- (SSC) Receive/Transmit Frame Sync length
+AT91C_SSC_FSOS            EQU (0x7:SHL:20) ;- (SSC) Receive/Transmit Frame Sync Output Selection
+AT91C_SSC_FSOS_NONE       EQU (0x0:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only
+AT91C_SSC_FSOS_NEGATIVE   EQU (0x1:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse
+AT91C_SSC_FSOS_POSITIVE   EQU (0x2:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse
+AT91C_SSC_FSOS_LOW        EQU (0x3:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer
+AT91C_SSC_FSOS_HIGH       EQU (0x4:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer
+AT91C_SSC_FSOS_TOGGLE     EQU (0x5:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer
+AT91C_SSC_FSEDGE          EQU (0x1:SHL:24) ;- (SSC) Frame Sync Edge Detection
+;- -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- 
+;- -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- 
+AT91C_SSC_DATDEF          EQU (0x1:SHL:5) ;- (SSC) Data Default Value
+AT91C_SSC_FSDEN           EQU (0x1:SHL:23) ;- (SSC) Frame Sync Data Enable
+;- -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- 
+AT91C_SSC_TXRDY           EQU (0x1:SHL:0) ;- (SSC) Transmit Ready
+AT91C_SSC_TXEMPTY         EQU (0x1:SHL:1) ;- (SSC) Transmit Empty
+AT91C_SSC_ENDTX           EQU (0x1:SHL:2) ;- (SSC) End Of Transmission
+AT91C_SSC_TXBUFE          EQU (0x1:SHL:3) ;- (SSC) Transmit Buffer Empty
+AT91C_SSC_RXRDY           EQU (0x1:SHL:4) ;- (SSC) Receive Ready
+AT91C_SSC_OVRUN           EQU (0x1:SHL:5) ;- (SSC) Receive Overrun
+AT91C_SSC_ENDRX           EQU (0x1:SHL:6) ;- (SSC) End of Reception
+AT91C_SSC_RXBUFF          EQU (0x1:SHL:7) ;- (SSC) Receive Buffer Full
+AT91C_SSC_CP0             EQU (0x1:SHL:8) ;- (SSC) Compare 0
+AT91C_SSC_CP1             EQU (0x1:SHL:9) ;- (SSC) Compare 1
+AT91C_SSC_TXSYN           EQU (0x1:SHL:10) ;- (SSC) Transmit Sync
+AT91C_SSC_RXSYN           EQU (0x1:SHL:11) ;- (SSC) Receive Sync
+AT91C_SSC_TXENA           EQU (0x1:SHL:16) ;- (SSC) Transmit Enable
+AT91C_SSC_RXENA           EQU (0x1:SHL:17) ;- (SSC) Receive Enable
+;- -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- 
+;- -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- 
+;- -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Usart
+;- *****************************************************************************
+                ^ 0 ;- AT91S_USART
+US_CR           #  4 ;- Control Register
+US_MR           #  4 ;- Mode Register
+US_IER          #  4 ;- Interrupt Enable Register
+US_IDR          #  4 ;- Interrupt Disable Register
+US_IMR          #  4 ;- Interrupt Mask Register
+US_CSR          #  4 ;- Channel Status Register
+US_RHR          #  4 ;- Receiver Holding Register
+US_THR          #  4 ;- Transmitter Holding Register
+US_BRGR         #  4 ;- Baud Rate Generator Register
+US_RTOR         #  4 ;- Receiver Time-out Register
+US_TTGR         #  4 ;- Transmitter Time-guard Register
+                # 20 ;- Reserved
+US_FIDI         #  4 ;- FI_DI_Ratio Register
+US_NER          #  4 ;- Nb Errors Register
+US_XXR          #  4 ;- XON_XOFF Register
+US_IF           #  4 ;- IRDA_FILTER Register
+                # 176 ;- Reserved
+US_RPR          #  4 ;- Receive Pointer Register
+US_RCR          #  4 ;- Receive Counter Register
+US_TPR          #  4 ;- Transmit Pointer Register
+US_TCR          #  4 ;- Transmit Counter Register
+US_RNPR         #  4 ;- Receive Next Pointer Register
+US_RNCR         #  4 ;- Receive Next Counter Register
+US_TNPR         #  4 ;- Transmit Next Pointer Register
+US_TNCR         #  4 ;- Transmit Next Counter Register
+US_PTCR         #  4 ;- PDC Transfer Control Register
+US_PTSR         #  4 ;- PDC Transfer Status Register
+;- -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- 
+AT91C_US_RSTSTA           EQU (0x1:SHL:8) ;- (USART) Reset Status Bits
+AT91C_US_STTBRK           EQU (0x1:SHL:9) ;- (USART) Start Break
+AT91C_US_STPBRK           EQU (0x1:SHL:10) ;- (USART) Stop Break
+AT91C_US_STTTO            EQU (0x1:SHL:11) ;- (USART) Start Time-out
+AT91C_US_SENDA            EQU (0x1:SHL:12) ;- (USART) Send Address
+AT91C_US_RSTIT            EQU (0x1:SHL:13) ;- (USART) Reset Iterations
+AT91C_US_RSTNACK          EQU (0x1:SHL:14) ;- (USART) Reset Non Acknowledge
+AT91C_US_RETTO            EQU (0x1:SHL:15) ;- (USART) Rearm Time-out
+AT91C_US_DTREN            EQU (0x1:SHL:16) ;- (USART) Data Terminal ready Enable
+AT91C_US_DTRDIS           EQU (0x1:SHL:17) ;- (USART) Data Terminal ready Disable
+AT91C_US_RTSEN            EQU (0x1:SHL:18) ;- (USART) Request to Send enable
+AT91C_US_RTSDIS           EQU (0x1:SHL:19) ;- (USART) Request to Send Disable
+;- -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- 
+AT91C_US_USMODE           EQU (0xF:SHL:0) ;- (USART) Usart mode
+AT91C_US_USMODE_NORMAL    EQU (0x0) ;- (USART) Normal
+AT91C_US_USMODE_RS485     EQU (0x1) ;- (USART) RS485
+AT91C_US_USMODE_HWHSH     EQU (0x2) ;- (USART) Hardware Handshaking
+AT91C_US_USMODE_MODEM     EQU (0x3) ;- (USART) Modem
+AT91C_US_USMODE_ISO7816_0 EQU (0x4) ;- (USART) ISO7816 protocol: T = 0
+AT91C_US_USMODE_ISO7816_1 EQU (0x6) ;- (USART) ISO7816 protocol: T = 1
+AT91C_US_USMODE_IRDA      EQU (0x8) ;- (USART) IrDA
+AT91C_US_USMODE_SWHSH     EQU (0xC) ;- (USART) Software Handshaking
+AT91C_US_CLKS             EQU (0x3:SHL:4) ;- (USART) Clock Selection (Baud Rate generator Input Clock
+AT91C_US_CLKS_CLOCK       EQU (0x0:SHL:4) ;- (USART) Clock
+AT91C_US_CLKS_FDIV1       EQU (0x1:SHL:4) ;- (USART) fdiv1
+AT91C_US_CLKS_SLOW        EQU (0x2:SHL:4) ;- (USART) slow_clock (ARM)
+AT91C_US_CLKS_EXT         EQU (0x3:SHL:4) ;- (USART) External (SCK)
+AT91C_US_CHRL             EQU (0x3:SHL:6) ;- (USART) Clock Selection (Baud Rate generator Input Clock
+AT91C_US_CHRL_5_BITS      EQU (0x0:SHL:6) ;- (USART) Character Length: 5 bits
+AT91C_US_CHRL_6_BITS      EQU (0x1:SHL:6) ;- (USART) Character Length: 6 bits
+AT91C_US_CHRL_7_BITS      EQU (0x2:SHL:6) ;- (USART) Character Length: 7 bits
+AT91C_US_CHRL_8_BITS      EQU (0x3:SHL:6) ;- (USART) Character Length: 8 bits
+AT91C_US_SYNC             EQU (0x1:SHL:8) ;- (USART) Synchronous Mode Select
+AT91C_US_NBSTOP           EQU (0x3:SHL:12) ;- (USART) Number of Stop bits
+AT91C_US_NBSTOP_1_BIT     EQU (0x0:SHL:12) ;- (USART) 1 stop bit
+AT91C_US_NBSTOP_15_BIT    EQU (0x1:SHL:12) ;- (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits
+AT91C_US_NBSTOP_2_BIT     EQU (0x2:SHL:12) ;- (USART) 2 stop bits
+AT91C_US_MSBF             EQU (0x1:SHL:16) ;- (USART) Bit Order
+AT91C_US_MODE9            EQU (0x1:SHL:17) ;- (USART) 9-bit Character length
+AT91C_US_CKLO             EQU (0x1:SHL:18) ;- (USART) Clock Output Select
+AT91C_US_OVER             EQU (0x1:SHL:19) ;- (USART) Over Sampling Mode
+AT91C_US_INACK            EQU (0x1:SHL:20) ;- (USART) Inhibit Non Acknowledge
+AT91C_US_DSNACK           EQU (0x1:SHL:21) ;- (USART) Disable Successive NACK
+AT91C_US_MAX_ITER         EQU (0x1:SHL:24) ;- (USART) Number of Repetitions
+AT91C_US_FILTER           EQU (0x1:SHL:28) ;- (USART) Receive Line Filter
+;- -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
+AT91C_US_RXBRK            EQU (0x1:SHL:2) ;- (USART) Break Received/End of Break
+AT91C_US_TIMEOUT          EQU (0x1:SHL:8) ;- (USART) Receiver Time-out
+AT91C_US_ITERATION        EQU (0x1:SHL:10) ;- (USART) Max number of Repetitions Reached
+AT91C_US_NACK             EQU (0x1:SHL:13) ;- (USART) Non Acknowledge
+AT91C_US_RIIC             EQU (0x1:SHL:16) ;- (USART) Ring INdicator Input Change Flag
+AT91C_US_DSRIC            EQU (0x1:SHL:17) ;- (USART) Data Set Ready Input Change Flag
+AT91C_US_DCDIC            EQU (0x1:SHL:18) ;- (USART) Data Carrier Flag
+AT91C_US_CTSIC            EQU (0x1:SHL:19) ;- (USART) Clear To Send Input Change Flag
+;- -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
+;- -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
+;- -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- 
+AT91C_US_RI               EQU (0x1:SHL:20) ;- (USART) Image of RI Input
+AT91C_US_DSR              EQU (0x1:SHL:21) ;- (USART) Image of DSR Input
+AT91C_US_DCD              EQU (0x1:SHL:22) ;- (USART) Image of DCD Input
+AT91C_US_CTS              EQU (0x1:SHL:23) ;- (USART) Image of CTS Input
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Two-wire Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_TWI
+TWI_CR          #  4 ;- Control Register
+TWI_MMR         #  4 ;- Master Mode Register
+TWI_SMR         #  4 ;- Slave Mode Register
+TWI_IADR        #  4 ;- Internal Address Register
+TWI_CWGR        #  4 ;- Clock Waveform Generator Register
+                # 12 ;- Reserved
+TWI_SR          #  4 ;- Status Register
+TWI_IER         #  4 ;- Interrupt Enable Register
+TWI_IDR         #  4 ;- Interrupt Disable Register
+TWI_IMR         #  4 ;- Interrupt Mask Register
+TWI_RHR         #  4 ;- Receive Holding Register
+TWI_THR         #  4 ;- Transmit Holding Register
+;- -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- 
+AT91C_TWI_START           EQU (0x1:SHL:0) ;- (TWI) Send a START Condition
+AT91C_TWI_STOP            EQU (0x1:SHL:1) ;- (TWI) Send a STOP Condition
+AT91C_TWI_MSEN            EQU (0x1:SHL:2) ;- (TWI) TWI Master Transfer Enabled
+AT91C_TWI_MSDIS           EQU (0x1:SHL:3) ;- (TWI) TWI Master Transfer Disabled
+AT91C_TWI_SVEN            EQU (0x1:SHL:4) ;- (TWI) TWI Slave Transfer Enabled
+AT91C_TWI_SVDIS           EQU (0x1:SHL:5) ;- (TWI) TWI Slave Transfer Disabled
+AT91C_TWI_SWRST           EQU (0x1:SHL:7) ;- (TWI) Software Reset
+;- -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- 
+AT91C_TWI_IADRSZ          EQU (0x3:SHL:8) ;- (TWI) Internal Device Address Size
+AT91C_TWI_IADRSZ_NO       EQU (0x0:SHL:8) ;- (TWI) No internal device address
+AT91C_TWI_IADRSZ_1_BYTE   EQU (0x1:SHL:8) ;- (TWI) One-byte internal device address
+AT91C_TWI_IADRSZ_2_BYTE   EQU (0x2:SHL:8) ;- (TWI) Two-byte internal device address
+AT91C_TWI_IADRSZ_3_BYTE   EQU (0x3:SHL:8) ;- (TWI) Three-byte internal device address
+AT91C_TWI_MREAD           EQU (0x1:SHL:12) ;- (TWI) Master Read Direction
+AT91C_TWI_DADR            EQU (0x7F:SHL:16) ;- (TWI) Device Address
+;- -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- 
+AT91C_TWI_SADR            EQU (0x7F:SHL:16) ;- (TWI) Slave Device Address
+;- -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- 
+AT91C_TWI_CLDIV           EQU (0xFF:SHL:0) ;- (TWI) Clock Low Divider
+AT91C_TWI_CHDIV           EQU (0xFF:SHL:8) ;- (TWI) Clock High Divider
+AT91C_TWI_CKDIV           EQU (0x7:SHL:16) ;- (TWI) Clock Divider
+;- -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- 
+AT91C_TWI_TXCOMP          EQU (0x1:SHL:0) ;- (TWI) Transmission Completed
+AT91C_TWI_RXRDY           EQU (0x1:SHL:1) ;- (TWI) Receive holding register ReaDY
+AT91C_TWI_TXRDY           EQU (0x1:SHL:2) ;- (TWI) Transmit holding register ReaDY
+AT91C_TWI_SVREAD          EQU (0x1:SHL:3) ;- (TWI) Slave Read
+AT91C_TWI_SVACC           EQU (0x1:SHL:4) ;- (TWI) Slave Access
+AT91C_TWI_GCACC           EQU (0x1:SHL:5) ;- (TWI) General Call Access
+AT91C_TWI_OVRE            EQU (0x1:SHL:6) ;- (TWI) Overrun Error
+AT91C_TWI_UNRE            EQU (0x1:SHL:7) ;- (TWI) Underrun Error
+AT91C_TWI_NACK            EQU (0x1:SHL:8) ;- (TWI) Not Acknowledged
+AT91C_TWI_ARBLST          EQU (0x1:SHL:9) ;- (TWI) Arbitration Lost
+;- -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- 
+;- -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- 
+;- -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Multimedia Card Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_MCI
+MCI_CR          #  4 ;- MCI Control Register
+MCI_MR          #  4 ;- MCI Mode Register
+MCI_DTOR        #  4 ;- MCI Data Timeout Register
+MCI_SDCR        #  4 ;- MCI SD Card Register
+MCI_ARGR        #  4 ;- MCI Argument Register
+MCI_CMDR        #  4 ;- MCI Command Register
+                #  8 ;- Reserved
+MCI_RSPR        # 16 ;- MCI Response Register
+MCI_RDR         #  4 ;- MCI Receive Data Register
+MCI_TDR         #  4 ;- MCI Transmit Data Register
+                #  8 ;- Reserved
+MCI_SR          #  4 ;- MCI Status Register
+MCI_IER         #  4 ;- MCI Interrupt Enable Register
+MCI_IDR         #  4 ;- MCI Interrupt Disable Register
+MCI_IMR         #  4 ;- MCI Interrupt Mask Register
+                # 176 ;- Reserved
+MCI_RPR         #  4 ;- Receive Pointer Register
+MCI_RCR         #  4 ;- Receive Counter Register
+MCI_TPR         #  4 ;- Transmit Pointer Register
+MCI_TCR         #  4 ;- Transmit Counter Register
+MCI_RNPR        #  4 ;- Receive Next Pointer Register
+MCI_RNCR        #  4 ;- Receive Next Counter Register
+MCI_TNPR        #  4 ;- Transmit Next Pointer Register
+MCI_TNCR        #  4 ;- Transmit Next Counter Register
+MCI_PTCR        #  4 ;- PDC Transfer Control Register
+MCI_PTSR        #  4 ;- PDC Transfer Status Register
+;- -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- 
+AT91C_MCI_MCIEN           EQU (0x1:SHL:0) ;- (MCI) Multimedia Interface Enable
+AT91C_MCI_MCIDIS          EQU (0x1:SHL:1) ;- (MCI) Multimedia Interface Disable
+AT91C_MCI_PWSEN           EQU (0x1:SHL:2) ;- (MCI) Power Save Mode Enable
+AT91C_MCI_PWSDIS          EQU (0x1:SHL:3) ;- (MCI) Power Save Mode Disable
+;- -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- 
+AT91C_MCI_CLKDIV          EQU (0x1:SHL:0) ;- (MCI) Clock Divider
+AT91C_MCI_PWSDIV          EQU (0x1:SHL:8) ;- (MCI) Power Saving Divider
+AT91C_MCI_PDCPADV         EQU (0x1:SHL:14) ;- (MCI) PDC Padding Value
+AT91C_MCI_PDCMODE         EQU (0x1:SHL:15) ;- (MCI) PDC Oriented Mode
+AT91C_MCI_BLKLEN          EQU (0x1:SHL:18) ;- (MCI) Data Block Length
+;- -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- 
+AT91C_MCI_DTOCYC          EQU (0x1:SHL:0) ;- (MCI) Data Timeout Cycle Number
+AT91C_MCI_DTOMUL          EQU (0x7:SHL:4) ;- (MCI) Data Timeout Multiplier
+AT91C_MCI_DTOMUL_1        EQU (0x0:SHL:4) ;- (MCI) DTOCYC x 1
+AT91C_MCI_DTOMUL_16       EQU (0x1:SHL:4) ;- (MCI) DTOCYC x 16
+AT91C_MCI_DTOMUL_128      EQU (0x2:SHL:4) ;- (MCI) DTOCYC x 128
+AT91C_MCI_DTOMUL_256      EQU (0x3:SHL:4) ;- (MCI) DTOCYC x 256
+AT91C_MCI_DTOMUL_1024     EQU (0x4:SHL:4) ;- (MCI) DTOCYC x 1024
+AT91C_MCI_DTOMUL_4096     EQU (0x5:SHL:4) ;- (MCI) DTOCYC x 4096
+AT91C_MCI_DTOMUL_65536    EQU (0x6:SHL:4) ;- (MCI) DTOCYC x 65536
+AT91C_MCI_DTOMUL_1048576  EQU (0x7:SHL:4) ;- (MCI) DTOCYC x 1048576
+;- -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- 
+AT91C_MCI_SCDSEL          EQU (0x1:SHL:0) ;- (MCI) SD Card Selector
+AT91C_MCI_SCDBUS          EQU (0x1:SHL:7) ;- (MCI) SD Card Bus Width
+;- -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- 
+AT91C_MCI_CMDNB           EQU (0x1F:SHL:0) ;- (MCI) Command Number
+AT91C_MCI_RSPTYP          EQU (0x3:SHL:6) ;- (MCI) Response Type
+AT91C_MCI_RSPTYP_NO       EQU (0x0:SHL:6) ;- (MCI) No response
+AT91C_MCI_RSPTYP_48       EQU (0x1:SHL:6) ;- (MCI) 48-bit response
+AT91C_MCI_RSPTYP_136      EQU (0x2:SHL:6) ;- (MCI) 136-bit response
+AT91C_MCI_SPCMD           EQU (0x7:SHL:8) ;- (MCI) Special CMD
+AT91C_MCI_SPCMD_NONE      EQU (0x0:SHL:8) ;- (MCI) Not a special CMD
+AT91C_MCI_SPCMD_INIT      EQU (0x1:SHL:8) ;- (MCI) Initialization CMD
+AT91C_MCI_SPCMD_SYNC      EQU (0x2:SHL:8) ;- (MCI) Synchronized CMD
+AT91C_MCI_SPCMD_IT_CMD    EQU (0x4:SHL:8) ;- (MCI) Interrupt command
+AT91C_MCI_SPCMD_IT_REP    EQU (0x5:SHL:8) ;- (MCI) Interrupt response
+AT91C_MCI_OPDCMD          EQU (0x1:SHL:11) ;- (MCI) Open Drain Command
+AT91C_MCI_MAXLAT          EQU (0x1:SHL:12) ;- (MCI) Maximum Latency for Command to respond
+AT91C_MCI_TRCMD           EQU (0x3:SHL:16) ;- (MCI) Transfer CMD
+AT91C_MCI_TRCMD_NO        EQU (0x0:SHL:16) ;- (MCI) No transfer
+AT91C_MCI_TRCMD_START     EQU (0x1:SHL:16) ;- (MCI) Start transfer
+AT91C_MCI_TRCMD_STOP      EQU (0x2:SHL:16) ;- (MCI) Stop transfer
+AT91C_MCI_TRDIR           EQU (0x1:SHL:18) ;- (MCI) Transfer Direction
+AT91C_MCI_TRTYP           EQU (0x3:SHL:19) ;- (MCI) Transfer Type
+AT91C_MCI_TRTYP_BLOCK     EQU (0x0:SHL:19) ;- (MCI) Block Transfer type
+AT91C_MCI_TRTYP_MULTIPLE  EQU (0x1:SHL:19) ;- (MCI) Multiple Block transfer type
+AT91C_MCI_TRTYP_STREAM    EQU (0x2:SHL:19) ;- (MCI) Stream transfer type
+;- -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- 
+AT91C_MCI_CMDRDY          EQU (0x1:SHL:0) ;- (MCI) Command Ready flag
+AT91C_MCI_RXRDY           EQU (0x1:SHL:1) ;- (MCI) RX Ready flag
+AT91C_MCI_TXRDY           EQU (0x1:SHL:2) ;- (MCI) TX Ready flag
+AT91C_MCI_BLKE            EQU (0x1:SHL:3) ;- (MCI) Data Block Transfer Ended flag
+AT91C_MCI_DTIP            EQU (0x1:SHL:4) ;- (MCI) Data Transfer in Progress flag
+AT91C_MCI_NOTBUSY         EQU (0x1:SHL:5) ;- (MCI) Data Line Not Busy flag
+AT91C_MCI_ENDRX           EQU (0x1:SHL:6) ;- (MCI) End of RX Buffer flag
+AT91C_MCI_ENDTX           EQU (0x1:SHL:7) ;- (MCI) End of TX Buffer flag
+AT91C_MCI_RXBUFF          EQU (0x1:SHL:14) ;- (MCI) RX Buffer Full flag
+AT91C_MCI_TXBUFE          EQU (0x1:SHL:15) ;- (MCI) TX Buffer Empty flag
+AT91C_MCI_RINDE           EQU (0x1:SHL:16) ;- (MCI) Response Index Error flag
+AT91C_MCI_RDIRE           EQU (0x1:SHL:17) ;- (MCI) Response Direction Error flag
+AT91C_MCI_RCRCE           EQU (0x1:SHL:18) ;- (MCI) Response CRC Error flag
+AT91C_MCI_RENDE           EQU (0x1:SHL:19) ;- (MCI) Response End Bit Error flag
+AT91C_MCI_RTOE            EQU (0x1:SHL:20) ;- (MCI) Response Time-out Error flag
+AT91C_MCI_DCRCE           EQU (0x1:SHL:21) ;- (MCI) data CRC Error flag
+AT91C_MCI_DTOE            EQU (0x1:SHL:22) ;- (MCI) Data timeout Error flag
+AT91C_MCI_OVRE            EQU (0x1:SHL:30) ;- (MCI) Overrun flag
+AT91C_MCI_UNRE            EQU (0x1:SHL:31) ;- (MCI) Underrun flag
+;- -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- 
+;- -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- 
+;- -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR USB Device Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_UDP
+UDP_NUM         #  4 ;- Frame Number Register
+UDP_GLBSTATE    #  4 ;- Global State Register
+UDP_FADDR       #  4 ;- Function Address Register
+                #  4 ;- Reserved
+UDP_IER         #  4 ;- Interrupt Enable Register
+UDP_IDR         #  4 ;- Interrupt Disable Register
+UDP_IMR         #  4 ;- Interrupt Mask Register
+UDP_ISR         #  4 ;- Interrupt Status Register
+UDP_ICR         #  4 ;- Interrupt Clear Register
+                #  4 ;- Reserved
+UDP_RSTEP       #  4 ;- Reset Endpoint Register
+                #  4 ;- Reserved
+UDP_CSR         # 32 ;- Endpoint Control and Status Register
+UDP_FDR         # 32 ;- Endpoint FIFO Data Register
+;- -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- 
+AT91C_UDP_FRM_NUM         EQU (0x7FF:SHL:0) ;- (UDP) Frame Number as Defined in the Packet Field Formats
+AT91C_UDP_FRM_ERR         EQU (0x1:SHL:16) ;- (UDP) Frame Error
+AT91C_UDP_FRM_OK          EQU (0x1:SHL:17) ;- (UDP) Frame OK
+;- -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- 
+AT91C_UDP_FADDEN          EQU (0x1:SHL:0) ;- (UDP) Function Address Enable
+AT91C_UDP_CONFG           EQU (0x1:SHL:1) ;- (UDP) Configured
+AT91C_UDP_RMWUPE          EQU (0x1:SHL:2) ;- (UDP) Remote Wake Up Enable
+AT91C_UDP_RSMINPR         EQU (0x1:SHL:3) ;- (UDP) A Resume Has Been Sent to the Host
+;- -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- 
+AT91C_UDP_FADD            EQU (0xFF:SHL:0) ;- (UDP) Function Address Value
+AT91C_UDP_FEN             EQU (0x1:SHL:8) ;- (UDP) Function Enable
+;- -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- 
+AT91C_UDP_EPINT0          EQU (0x1:SHL:0) ;- (UDP) Endpoint 0 Interrupt
+AT91C_UDP_EPINT1          EQU (0x1:SHL:1) ;- (UDP) Endpoint 0 Interrupt
+AT91C_UDP_EPINT2          EQU (0x1:SHL:2) ;- (UDP) Endpoint 2 Interrupt
+AT91C_UDP_EPINT3          EQU (0x1:SHL:3) ;- (UDP) Endpoint 3 Interrupt
+AT91C_UDP_EPINT4          EQU (0x1:SHL:4) ;- (UDP) Endpoint 4 Interrupt
+AT91C_UDP_EPINT5          EQU (0x1:SHL:5) ;- (UDP) Endpoint 5 Interrupt
+AT91C_UDP_EPINT6          EQU (0x1:SHL:6) ;- (UDP) Endpoint 6 Interrupt
+AT91C_UDP_EPINT7          EQU (0x1:SHL:7) ;- (UDP) Endpoint 7 Interrupt
+AT91C_UDP_RXSUSP          EQU (0x1:SHL:8) ;- (UDP) USB Suspend Interrupt
+AT91C_UDP_RXRSM           EQU (0x1:SHL:9) ;- (UDP) USB Resume Interrupt
+AT91C_UDP_EXTRSM          EQU (0x1:SHL:10) ;- (UDP) USB External Resume Interrupt
+AT91C_UDP_SOFINT          EQU (0x1:SHL:11) ;- (UDP) USB Start Of frame Interrupt
+AT91C_UDP_WAKEUP          EQU (0x1:SHL:13) ;- (UDP) USB Resume Interrupt
+;- -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- 
+;- -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- 
+;- -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- 
+AT91C_UDP_ENDBUSRES       EQU (0x1:SHL:12) ;- (UDP) USB End Of Bus Reset Interrupt
+;- -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- 
+;- -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- 
+AT91C_UDP_EP0             EQU (0x1:SHL:0) ;- (UDP) Reset Endpoint 0
+AT91C_UDP_EP1             EQU (0x1:SHL:1) ;- (UDP) Reset Endpoint 1
+AT91C_UDP_EP2             EQU (0x1:SHL:2) ;- (UDP) Reset Endpoint 2
+AT91C_UDP_EP3             EQU (0x1:SHL:3) ;- (UDP) Reset Endpoint 3
+AT91C_UDP_EP4             EQU (0x1:SHL:4) ;- (UDP) Reset Endpoint 4
+AT91C_UDP_EP5             EQU (0x1:SHL:5) ;- (UDP) Reset Endpoint 5
+AT91C_UDP_EP6             EQU (0x1:SHL:6) ;- (UDP) Reset Endpoint 6
+AT91C_UDP_EP7             EQU (0x1:SHL:7) ;- (UDP) Reset Endpoint 7
+;- -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- 
+AT91C_UDP_TXCOMP          EQU (0x1:SHL:0) ;- (UDP) Generates an IN packet with data previously written in the DPR
+AT91C_UDP_RX_DATA_BK0     EQU (0x1:SHL:1) ;- (UDP) Receive Data Bank 0
+AT91C_UDP_RXSETUP         EQU (0x1:SHL:2) ;- (UDP) Sends STALL to the Host (Control endpoints)
+AT91C_UDP_ISOERROR        EQU (0x1:SHL:3) ;- (UDP) Isochronous error (Isochronous endpoints)
+AT91C_UDP_TXPKTRDY        EQU (0x1:SHL:4) ;- (UDP) Transmit Packet Ready
+AT91C_UDP_FORCESTALL      EQU (0x1:SHL:5) ;- (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints).
+AT91C_UDP_RX_DATA_BK1     EQU (0x1:SHL:6) ;- (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes).
+AT91C_UDP_DIR             EQU (0x1:SHL:7) ;- (UDP) Transfer Direction
+AT91C_UDP_EPTYPE          EQU (0x7:SHL:8) ;- (UDP) Endpoint type
+AT91C_UDP_EPTYPE_CTRL     EQU (0x0:SHL:8) ;- (UDP) Control
+AT91C_UDP_EPTYPE_ISO_OUT  EQU (0x1:SHL:8) ;- (UDP) Isochronous OUT
+AT91C_UDP_EPTYPE_BULK_OUT EQU (0x2:SHL:8) ;- (UDP) Bulk OUT
+AT91C_UDP_EPTYPE_INT_OUT  EQU (0x3:SHL:8) ;- (UDP) Interrupt OUT
+AT91C_UDP_EPTYPE_ISO_IN   EQU (0x5:SHL:8) ;- (UDP) Isochronous IN
+AT91C_UDP_EPTYPE_BULK_IN  EQU (0x6:SHL:8) ;- (UDP) Bulk IN
+AT91C_UDP_EPTYPE_INT_IN   EQU (0x7:SHL:8) ;- (UDP) Interrupt IN
+AT91C_UDP_DTGLE           EQU (0x1:SHL:11) ;- (UDP) Data Toggle
+AT91C_UDP_EPEDS           EQU (0x1:SHL:15) ;- (UDP) Endpoint Enable Disable
+AT91C_UDP_RXBYTECNT       EQU (0x7FF:SHL:16) ;- (UDP) Number Of Bytes Available in the FIFO
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_TC
+TC_CCR          #  4 ;- Channel Control Register
+TC_CMR          #  4 ;- Channel Mode Register
+                #  8 ;- Reserved
+TC_CV           #  4 ;- Counter Value
+TC_RA           #  4 ;- Register A
+TC_RB           #  4 ;- Register B
+TC_RC           #  4 ;- Register C
+TC_SR           #  4 ;- Status Register
+TC_IER          #  4 ;- Interrupt Enable Register
+TC_IDR          #  4 ;- Interrupt Disable Register
+TC_IMR          #  4 ;- Interrupt Mask Register
+;- -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- 
+AT91C_TC_CLKEN            EQU (0x1:SHL:0) ;- (TC) Counter Clock Enable Command
+AT91C_TC_CLKDIS           EQU (0x1:SHL:1) ;- (TC) Counter Clock Disable Command
+AT91C_TC_SWTRG            EQU (0x1:SHL:2) ;- (TC) Software Trigger Command
+;- -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- 
+AT91C_TC_CPCSTOP          EQU (0x1:SHL:6) ;- (TC) Counter Clock Stopped with RC Compare
+AT91C_TC_CPCDIS           EQU (0x1:SHL:7) ;- (TC) Counter Clock Disable with RC Compare
+AT91C_TC_EEVTEDG          EQU (0x3:SHL:8) ;- (TC) External Event Edge Selection
+AT91C_TC_EEVTEDG_NONE     EQU (0x0:SHL:8) ;- (TC) Edge: None
+AT91C_TC_EEVTEDG_RISING   EQU (0x1:SHL:8) ;- (TC) Edge: rising edge
+AT91C_TC_EEVTEDG_FALLING  EQU (0x2:SHL:8) ;- (TC) Edge: falling edge
+AT91C_TC_EEVTEDG_BOTH     EQU (0x3:SHL:8) ;- (TC) Edge: each edge
+AT91C_TC_EEVT             EQU (0x3:SHL:10) ;- (TC) External Event  Selection
+AT91C_TC_EEVT_NONE        EQU (0x0:SHL:10) ;- (TC) Signal selected as external event: TIOB TIOB direction: input
+AT91C_TC_EEVT_RISING      EQU (0x1:SHL:10) ;- (TC) Signal selected as external event: XC0 TIOB direction: output
+AT91C_TC_EEVT_FALLING     EQU (0x2:SHL:10) ;- (TC) Signal selected as external event: XC1 TIOB direction: output
+AT91C_TC_EEVT_BOTH        EQU (0x3:SHL:10) ;- (TC) Signal selected as external event: XC2 TIOB direction: output
+AT91C_TC_ENETRG           EQU (0x1:SHL:12) ;- (TC) External Event Trigger enable
+AT91C_TC_WAVESEL          EQU (0x3:SHL:13) ;- (TC) Waveform  Selection
+AT91C_TC_WAVESEL_UP       EQU (0x0:SHL:13) ;- (TC) UP mode without atomatic trigger on RC Compare
+AT91C_TC_WAVESEL_UPDOWN   EQU (0x1:SHL:13) ;- (TC) UPDOWN mode without automatic trigger on RC Compare
+AT91C_TC_WAVESEL_UP_AUTO  EQU (0x2:SHL:13) ;- (TC) UP mode with automatic trigger on RC Compare
+AT91C_TC_WAVESEL_UPDOWN_AUTO EQU (0x3:SHL:13) ;- (TC) UPDOWN mode with automatic trigger on RC Compare
+AT91C_TC_CPCTRG           EQU (0x1:SHL:14) ;- (TC) RC Compare Trigger Enable
+AT91C_TC_WAVE             EQU (0x1:SHL:15) ;- (TC) 
+AT91C_TC_ACPA             EQU (0x3:SHL:16) ;- (TC) RA Compare Effect on TIOA
+AT91C_TC_ACPA_NONE        EQU (0x0:SHL:16) ;- (TC) Effect: none
+AT91C_TC_ACPA_SET         EQU (0x1:SHL:16) ;- (TC) Effect: set
+AT91C_TC_ACPA_CLEAR       EQU (0x2:SHL:16) ;- (TC) Effect: clear
+AT91C_TC_ACPA_TOGGLE      EQU (0x3:SHL:16) ;- (TC) Effect: toggle
+AT91C_TC_ACPC             EQU (0x3:SHL:18) ;- (TC) RC Compare Effect on TIOA
+AT91C_TC_ACPC_NONE        EQU (0x0:SHL:18) ;- (TC) Effect: none
+AT91C_TC_ACPC_SET         EQU (0x1:SHL:18) ;- (TC) Effect: set
+AT91C_TC_ACPC_CLEAR       EQU (0x2:SHL:18) ;- (TC) Effect: clear
+AT91C_TC_ACPC_TOGGLE      EQU (0x3:SHL:18) ;- (TC) Effect: toggle
+AT91C_TC_AEEVT            EQU (0x3:SHL:20) ;- (TC) External Event Effect on TIOA
+AT91C_TC_AEEVT_NONE       EQU (0x0:SHL:20) ;- (TC) Effect: none
+AT91C_TC_AEEVT_SET        EQU (0x1:SHL:20) ;- (TC) Effect: set
+AT91C_TC_AEEVT_CLEAR      EQU (0x2:SHL:20) ;- (TC) Effect: clear
+AT91C_TC_AEEVT_TOGGLE     EQU (0x3:SHL:20) ;- (TC) Effect: toggle
+AT91C_TC_ASWTRG           EQU (0x3:SHL:22) ;- (TC) Software Trigger Effect on TIOA
+AT91C_TC_ASWTRG_NONE      EQU (0x0:SHL:22) ;- (TC) Effect: none
+AT91C_TC_ASWTRG_SET       EQU (0x1:SHL:22) ;- (TC) Effect: set
+AT91C_TC_ASWTRG_CLEAR     EQU (0x2:SHL:22) ;- (TC) Effect: clear
+AT91C_TC_ASWTRG_TOGGLE    EQU (0x3:SHL:22) ;- (TC) Effect: toggle
+AT91C_TC_BCPB             EQU (0x3:SHL:24) ;- (TC) RB Compare Effect on TIOB
+AT91C_TC_BCPB_NONE        EQU (0x0:SHL:24) ;- (TC) Effect: none
+AT91C_TC_BCPB_SET         EQU (0x1:SHL:24) ;- (TC) Effect: set
+AT91C_TC_BCPB_CLEAR       EQU (0x2:SHL:24) ;- (TC) Effect: clear
+AT91C_TC_BCPB_TOGGLE      EQU (0x3:SHL:24) ;- (TC) Effect: toggle
+AT91C_TC_BCPC             EQU (0x3:SHL:26) ;- (TC) RC Compare Effect on TIOB
+AT91C_TC_BCPC_NONE        EQU (0x0:SHL:26) ;- (TC) Effect: none
+AT91C_TC_BCPC_SET         EQU (0x1:SHL:26) ;- (TC) Effect: set
+AT91C_TC_BCPC_CLEAR       EQU (0x2:SHL:26) ;- (TC) Effect: clear
+AT91C_TC_BCPC_TOGGLE      EQU (0x3:SHL:26) ;- (TC) Effect: toggle
+AT91C_TC_BEEVT            EQU (0x3:SHL:28) ;- (TC) External Event Effect on TIOB
+AT91C_TC_BEEVT_NONE       EQU (0x0:SHL:28) ;- (TC) Effect: none
+AT91C_TC_BEEVT_SET        EQU (0x1:SHL:28) ;- (TC) Effect: set
+AT91C_TC_BEEVT_CLEAR      EQU (0x2:SHL:28) ;- (TC) Effect: clear
+AT91C_TC_BEEVT_TOGGLE     EQU (0x3:SHL:28) ;- (TC) Effect: toggle
+AT91C_TC_BSWTRG           EQU (0x3:SHL:30) ;- (TC) Software Trigger Effect on TIOB
+AT91C_TC_BSWTRG_NONE      EQU (0x0:SHL:30) ;- (TC) Effect: none
+AT91C_TC_BSWTRG_SET       EQU (0x1:SHL:30) ;- (TC) Effect: set
+AT91C_TC_BSWTRG_CLEAR     EQU (0x2:SHL:30) ;- (TC) Effect: clear
+AT91C_TC_BSWTRG_TOGGLE    EQU (0x3:SHL:30) ;- (TC) Effect: toggle
+;- -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- 
+AT91C_TC_COVFS            EQU (0x1:SHL:0) ;- (TC) Counter Overflow
+AT91C_TC_LOVRS            EQU (0x1:SHL:1) ;- (TC) Load Overrun
+AT91C_TC_CPAS             EQU (0x1:SHL:2) ;- (TC) RA Compare
+AT91C_TC_CPBS             EQU (0x1:SHL:3) ;- (TC) RB Compare
+AT91C_TC_CPCS             EQU (0x1:SHL:4) ;- (TC) RC Compare
+AT91C_TC_LDRAS            EQU (0x1:SHL:5) ;- (TC) RA Loading
+AT91C_TC_LDRBS            EQU (0x1:SHL:6) ;- (TC) RB Loading
+AT91C_TC_ETRCS            EQU (0x1:SHL:7) ;- (TC) External Trigger
+AT91C_TC_ETRGS            EQU (0x1:SHL:16) ;- (TC) Clock Enabling
+AT91C_TC_MTIOA            EQU (0x1:SHL:17) ;- (TC) TIOA Mirror
+AT91C_TC_MTIOB            EQU (0x1:SHL:18) ;- (TC) TIOA Mirror
+;- -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- 
+;- -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- 
+;- -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Timer Counter Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_TCB
+TCB_TC0         # 48 ;- TC Channel 0
+                # 16 ;- Reserved
+TCB_TC1         # 48 ;- TC Channel 1
+                # 16 ;- Reserved
+TCB_TC2         # 48 ;- TC Channel 2
+                # 16 ;- Reserved
+TCB_BCR         #  4 ;- TC Block Control Register
+TCB_BMR         #  4 ;- TC Block Mode Register
+;- -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- 
+AT91C_TCB_SYNC            EQU (0x1:SHL:0) ;- (TCB) Synchro Command
+;- -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- 
+AT91C_TCB_TC0XC0S         EQU (0x1:SHL:0) ;- (TCB) External Clock Signal 0 Selection
+AT91C_TCB_TC0XC0S_TCLK0   EQU (0x0) ;- (TCB) TCLK0 connected to XC0
+AT91C_TCB_TC0XC0S_NONE    EQU (0x1) ;- (TCB) None signal connected to XC0
+AT91C_TCB_TC0XC0S_TIOA1   EQU (0x2) ;- (TCB) TIOA1 connected to XC0
+AT91C_TCB_TC0XC0S_TIOA2   EQU (0x3) ;- (TCB) TIOA2 connected to XC0
+AT91C_TCB_TC1XC1S         EQU (0x1:SHL:2) ;- (TCB) External Clock Signal 1 Selection
+AT91C_TCB_TC1XC1S_TCLK1   EQU (0x0:SHL:2) ;- (TCB) TCLK1 connected to XC1
+AT91C_TCB_TC1XC1S_NONE    EQU (0x1:SHL:2) ;- (TCB) None signal connected to XC1
+AT91C_TCB_TC1XC1S_TIOA0   EQU (0x2:SHL:2) ;- (TCB) TIOA0 connected to XC1
+AT91C_TCB_TC1XC1S_TIOA2   EQU (0x3:SHL:2) ;- (TCB) TIOA2 connected to XC1
+AT91C_TCB_TC2XC2S         EQU (0x1:SHL:4) ;- (TCB) External Clock Signal 2 Selection
+AT91C_TCB_TC2XC2S_TCLK2   EQU (0x0:SHL:4) ;- (TCB) TCLK2 connected to XC2
+AT91C_TCB_TC2XC2S_NONE    EQU (0x1:SHL:4) ;- (TCB) None signal connected to XC2
+AT91C_TCB_TC2XC2S_TIOA0   EQU (0x2:SHL:4) ;- (TCB) TIOA0 connected to XC2
+AT91C_TCB_TC2XC2S_TIOA2   EQU (0x3:SHL:4) ;- (TCB) TIOA2 connected to XC2
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR USB Host Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_UHP
+UHP_HcRevision  #  4 ;- Revision
+UHP_HcControl   #  4 ;- Operating modes for the Host Controller
+UHP_HcCommandStatus #  4 ;- Command & status Register
+UHP_HcInterruptStatus #  4 ;- Interrupt Status Register
+UHP_HcInterruptEnable #  4 ;- Interrupt Enable Register
+UHP_HcInterruptDisable #  4 ;- Interrupt Disable Register
+UHP_HcHCCA      #  4 ;- Pointer to the Host Controller Communication Area
+UHP_HcPeriodCurrentED #  4 ;- Current Isochronous or Interrupt Endpoint Descriptor
+UHP_HcControlHeadED #  4 ;- First Endpoint Descriptor of the Control list
+UHP_HcControlCurrentED #  4 ;- Endpoint Control and Status Register
+UHP_HcBulkHeadED #  4 ;- First endpoint register of the Bulk list
+UHP_HcBulkCurrentED #  4 ;- Current endpoint of the Bulk list
+UHP_HcBulkDoneHead #  4 ;- Last completed transfer descriptor
+UHP_HcFmInterval #  4 ;- Bit time between 2 consecutive SOFs
+UHP_HcFmRemaining #  4 ;- Bit time remaining in the current Frame
+UHP_HcFmNumber  #  4 ;- Frame number
+UHP_HcPeriodicStart #  4 ;- Periodic Start
+UHP_HcLSThreshold #  4 ;- LS Threshold
+UHP_HcRhDescriptorA #  4 ;- Root Hub characteristics A
+UHP_HcRhDescriptorB #  4 ;- Root Hub characteristics B
+UHP_HcRhStatus  #  4 ;- Root Hub Status register
+UHP_HcRhPortStatus #  8 ;- Root Hub Port Status Register
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Ethernet MAC
+;- *****************************************************************************
+                ^ 0 ;- AT91S_EMAC
+EMAC_CTL        #  4 ;- Network Control Register
+EMAC_CFG        #  4 ;- Network Configuration Register
+EMAC_SR         #  4 ;- Network Status Register
+EMAC_TAR        #  4 ;- Transmit Address Register
+EMAC_TCR        #  4 ;- Transmit Control Register
+EMAC_TSR        #  4 ;- Transmit Status Register
+EMAC_RBQP       #  4 ;- Receive Buffer Queue Pointer
+                #  4 ;- Reserved
+EMAC_RSR        #  4 ;- Receive Status Register
+EMAC_ISR        #  4 ;- Interrupt Status Register
+EMAC_IER        #  4 ;- Interrupt Enable Register
+EMAC_IDR        #  4 ;- Interrupt Disable Register
+EMAC_IMR        #  4 ;- Interrupt Mask Register
+EMAC_MAN        #  4 ;- PHY Maintenance Register
+                #  8 ;- Reserved
+EMAC_FRA        #  4 ;- Frames Transmitted OK Register
+EMAC_SCOL       #  4 ;- Single Collision Frame Register
+EMAC_MCOL       #  4 ;- Multiple Collision Frame Register
+EMAC_OK         #  4 ;- Frames Received OK Register
+EMAC_SEQE       #  4 ;- Frame Check Sequence Error Register
+EMAC_ALE        #  4 ;- Alignment Error Register
+EMAC_DTE        #  4 ;- Deferred Transmission Frame Register
+EMAC_LCOL       #  4 ;- Late Collision Register
+EMAC_ECOL       #  4 ;- Excessive Collision Register
+EMAC_CSE        #  4 ;- Carrier Sense Error Register
+EMAC_TUE        #  4 ;- Transmit Underrun Error Register
+EMAC_CDE        #  4 ;- Code Error Register
+EMAC_ELR        #  4 ;- Excessive Length Error Register
+EMAC_RJB        #  4 ;- Receive Jabber Register
+EMAC_USF        #  4 ;- Undersize Frame Register
+EMAC_SQEE       #  4 ;- SQE Test Error Register
+EMAC_DRFC       #  4 ;- Discarded RX Frame Register
+                # 12 ;- Reserved
+EMAC_HSH        #  4 ;- Hash Address High[63:32]
+EMAC_HSL        #  4 ;- Hash Address Low[31:0]
+EMAC_SA1L       #  4 ;- Specific Address 1 Low, First 4 bytes
+EMAC_SA1H       #  4 ;- Specific Address 1 High, Last 2 bytes
+EMAC_SA2L       #  4 ;- Specific Address 2 Low, First 4 bytes
+EMAC_SA2H       #  4 ;- Specific Address 2 High, Last 2 bytes
+EMAC_SA3L       #  4 ;- Specific Address 3 Low, First 4 bytes
+EMAC_SA3H       #  4 ;- Specific Address 3 High, Last 2 bytes
+EMAC_SA4L       #  4 ;- Specific Address 4 Low, First 4 bytes
+EMAC_SA4H       #  4 ;- Specific Address 4 High, Last 2 bytesr
+;- -------- EMAC_CTL : (EMAC Offset: 0x0)  -------- 
+AT91C_EMAC_LB             EQU (0x1:SHL:0) ;- (EMAC) Loopback. Optional. When set, loopback signal is at high level.
+AT91C_EMAC_LBL            EQU (0x1:SHL:1) ;- (EMAC) Loopback local. 
+AT91C_EMAC_RE             EQU (0x1:SHL:2) ;- (EMAC) Receive enable. 
+AT91C_EMAC_TE             EQU (0x1:SHL:3) ;- (EMAC) Transmit enable. 
+AT91C_EMAC_MPE            EQU (0x1:SHL:4) ;- (EMAC) Management port enable. 
+AT91C_EMAC_CSR            EQU (0x1:SHL:5) ;- (EMAC) Clear statistics registers. 
+AT91C_EMAC_ISR            EQU (0x1:SHL:6) ;- (EMAC) Increment statistics registers. 
+AT91C_EMAC_WES            EQU (0x1:SHL:7) ;- (EMAC) Write enable for statistics registers. 
+AT91C_EMAC_BP             EQU (0x1:SHL:8) ;- (EMAC) Back pressure. 
+;- -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- 
+AT91C_EMAC_SPD            EQU (0x1:SHL:0) ;- (EMAC) Speed. 
+AT91C_EMAC_FD             EQU (0x1:SHL:1) ;- (EMAC) Full duplex. 
+AT91C_EMAC_BR             EQU (0x1:SHL:2) ;- (EMAC) Bit rate. 
+AT91C_EMAC_CAF            EQU (0x1:SHL:4) ;- (EMAC) Copy all frames. 
+AT91C_EMAC_NBC            EQU (0x1:SHL:5) ;- (EMAC) No broadcast. 
+AT91C_EMAC_MTI            EQU (0x1:SHL:6) ;- (EMAC) Multicast hash enable
+AT91C_EMAC_UNI            EQU (0x1:SHL:7) ;- (EMAC) Unicast hash enable. 
+AT91C_EMAC_BIG            EQU (0x1:SHL:8) ;- (EMAC) Receive 1522 bytes. 
+AT91C_EMAC_EAE            EQU (0x1:SHL:9) ;- (EMAC) External address match enable. 
+AT91C_EMAC_CLK            EQU (0x3:SHL:10) ;- (EMAC) 
+AT91C_EMAC_CLK_HCLK_8     EQU (0x0:SHL:10) ;- (EMAC) HCLK divided by 8
+AT91C_EMAC_CLK_HCLK_16    EQU (0x1:SHL:10) ;- (EMAC) HCLK divided by 16
+AT91C_EMAC_CLK_HCLK_32    EQU (0x2:SHL:10) ;- (EMAC) HCLK divided by 32
+AT91C_EMAC_CLK_HCLK_64    EQU (0x3:SHL:10) ;- (EMAC) HCLK divided by 64
+AT91C_EMAC_RTY            EQU (0x1:SHL:12) ;- (EMAC) 
+AT91C_EMAC_RMII           EQU (0x1:SHL:13) ;- (EMAC) 
+;- -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- 
+AT91C_EMAC_MDIO           EQU (0x1:SHL:1) ;- (EMAC) 
+AT91C_EMAC_IDLE           EQU (0x1:SHL:2) ;- (EMAC) 
+;- -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- 
+AT91C_EMAC_LEN            EQU (0x7FF:SHL:0) ;- (EMAC) 
+AT91C_EMAC_NCRC           EQU (0x1:SHL:15) ;- (EMAC) 
+;- -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- 
+AT91C_EMAC_OVR            EQU (0x1:SHL:0) ;- (EMAC) 
+AT91C_EMAC_COL            EQU (0x1:SHL:1) ;- (EMAC) 
+AT91C_EMAC_RLE            EQU (0x1:SHL:2) ;- (EMAC) 
+AT91C_EMAC_TXIDLE         EQU (0x1:SHL:3) ;- (EMAC) 
+AT91C_EMAC_BNQ            EQU (0x1:SHL:4) ;- (EMAC) 
+AT91C_EMAC_COMP           EQU (0x1:SHL:5) ;- (EMAC) 
+AT91C_EMAC_UND            EQU (0x1:SHL:6) ;- (EMAC) 
+;- -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- 
+AT91C_EMAC_BNA            EQU (0x1:SHL:0) ;- (EMAC) 
+AT91C_EMAC_REC            EQU (0x1:SHL:1) ;- (EMAC) 
+;- -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- 
+AT91C_EMAC_DONE           EQU (0x1:SHL:0) ;- (EMAC) 
+AT91C_EMAC_RCOM           EQU (0x1:SHL:1) ;- (EMAC) 
+AT91C_EMAC_RBNA           EQU (0x1:SHL:2) ;- (EMAC) 
+AT91C_EMAC_TOVR           EQU (0x1:SHL:3) ;- (EMAC) 
+AT91C_EMAC_TUND           EQU (0x1:SHL:4) ;- (EMAC) 
+AT91C_EMAC_RTRY           EQU (0x1:SHL:5) ;- (EMAC) 
+AT91C_EMAC_TBRE           EQU (0x1:SHL:6) ;- (EMAC) 
+AT91C_EMAC_TCOM           EQU (0x1:SHL:7) ;- (EMAC) 
+AT91C_EMAC_TIDLE          EQU (0x1:SHL:8) ;- (EMAC) 
+AT91C_EMAC_LINK           EQU (0x1:SHL:9) ;- (EMAC) 
+AT91C_EMAC_ROVR           EQU (0x1:SHL:10) ;- (EMAC) 
+AT91C_EMAC_HRESP          EQU (0x1:SHL:11) ;- (EMAC) 
+;- -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- 
+;- -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- 
+;- -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- 
+;- -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- 
+AT91C_EMAC_DATA           EQU (0xFFFF:SHL:0) ;- (EMAC) 
+AT91C_EMAC_CODE           EQU (0x3:SHL:16) ;- (EMAC) 
+AT91C_EMAC_REGA           EQU (0x1F:SHL:18) ;- (EMAC) 
+AT91C_EMAC_PHYA           EQU (0x1F:SHL:23) ;- (EMAC) 
+AT91C_EMAC_RW             EQU (0x3:SHL:28) ;- (EMAC) 
+AT91C_EMAC_HIGH           EQU (0x1:SHL:30) ;- (EMAC) 
+AT91C_EMAC_LOW            EQU (0x1:SHL:31) ;- (EMAC) 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR External Bus Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_EBI
+EBI_CSA         #  4 ;- Chip Select Assignment Register
+EBI_CFGR        #  4 ;- Configuration Register
+;- -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- 
+AT91C_EBI_CS0A            EQU (0x1:SHL:0) ;- (EBI) Chip Select 0 Assignment
+AT91C_EBI_CS0A_SMC        EQU (0x0) ;- (EBI) Chip Select 0 is assigned to the Static Memory Controller.
+AT91C_EBI_CS0A_BFC        EQU (0x1) ;- (EBI) Chip Select 0 is assigned to the Burst Flash Controller.
+AT91C_EBI_CS1A            EQU (0x1:SHL:1) ;- (EBI) Chip Select 1 Assignment
+AT91C_EBI_CS1A_SMC        EQU (0x0:SHL:1) ;- (EBI) Chip Select 1 is assigned to the Static Memory Controller.
+AT91C_EBI_CS1A_SDRAMC     EQU (0x1:SHL:1) ;- (EBI) Chip Select 1 is assigned to the SDRAM Controller.
+AT91C_EBI_CS3A            EQU (0x1:SHL:3) ;- (EBI) Chip Select 3 Assignment
+AT91C_EBI_CS3A_SMC        EQU (0x0:SHL:3) ;- (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2.
+AT91C_EBI_CS3A_SMC_SmartMedia EQU (0x1:SHL:3) ;- (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated.
+AT91C_EBI_CS4A            EQU (0x1:SHL:4) ;- (EBI) Chip Select 4 Assignment
+AT91C_EBI_CS4A_SMC        EQU (0x0:SHL:4) ;- (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2.
+AT91C_EBI_CS4A_SMC_CompactFlash EQU (0x1:SHL:4) ;- (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated.
+;- -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- 
+AT91C_EBI_DBPUC           EQU (0x1:SHL:0) ;- (EBI) Data Bus Pull-Up Configuration
+AT91C_EBI_EBSEN           EQU (0x1:SHL:1) ;- (EBI) Bus Sharing Enable
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Static Memory Controller 2 Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_SMC2
+SMC2_CSR        # 32 ;- SMC2 Chip Select Register
+;- -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- 
+AT91C_SMC2_NWS            EQU (0x7F:SHL:0) ;- (SMC2) Number of Wait States
+AT91C_SMC2_WSEN           EQU (0x1:SHL:7) ;- (SMC2) Wait State Enable
+AT91C_SMC2_TDF            EQU (0xF:SHL:8) ;- (SMC2) Data Float Time
+AT91C_SMC2_BAT            EQU (0x1:SHL:12) ;- (SMC2) Byte Access Type
+AT91C_SMC2_DBW            EQU (0x1:SHL:13) ;- (SMC2) Data Bus Width
+AT91C_SMC2_DBW_16         EQU (0x1:SHL:13) ;- (SMC2) 16-bit.
+AT91C_SMC2_DBW_8          EQU (0x2:SHL:13) ;- (SMC2) 8-bit.
+AT91C_SMC2_DRP            EQU (0x1:SHL:15) ;- (SMC2) Data Read Protocol
+AT91C_SMC2_ACSS           EQU (0x3:SHL:16) ;- (SMC2) Address to Chip Select Setup
+AT91C_SMC2_ACSS_STANDARD  EQU (0x0:SHL:16) ;- (SMC2) Standard, asserted at the beginning of the access and deasserted at the end.
+AT91C_SMC2_ACSS_1_CYCLE   EQU (0x1:SHL:16) ;- (SMC2) One cycle less at the beginning and the end of the access.
+AT91C_SMC2_ACSS_2_CYCLES  EQU (0x2:SHL:16) ;- (SMC2) Two cycles less at the beginning and the end of the access.
+AT91C_SMC2_ACSS_3_CYCLES  EQU (0x3:SHL:16) ;- (SMC2) Three cycles less at the beginning and the end of the access.
+AT91C_SMC2_RWSETUP        EQU (0x7:SHL:24) ;- (SMC2) Read and Write Signal Setup Time
+AT91C_SMC2_RWHOLD         EQU (0x7:SHL:29) ;- (SMC2) Read and Write Signal Hold Time
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR SDRAM Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_SDRC
+SDRC_MR         #  4 ;- SDRAM Controller Mode Register
+SDRC_TR         #  4 ;- SDRAM Controller Refresh Timer Register
+SDRC_CR         #  4 ;- SDRAM Controller Configuration Register
+SDRC_SRR        #  4 ;- SDRAM Controller Self Refresh Register
+SDRC_LPR        #  4 ;- SDRAM Controller Low Power Register
+SDRC_IER        #  4 ;- SDRAM Controller Interrupt Enable Register
+SDRC_IDR        #  4 ;- SDRAM Controller Interrupt Disable Register
+SDRC_IMR        #  4 ;- SDRAM Controller Interrupt Mask Register
+SDRC_ISR        #  4 ;- SDRAM Controller Interrupt Mask Register
+;- -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- 
+AT91C_SDRC_MODE           EQU (0xF:SHL:0) ;- (SDRC) Mode
+AT91C_SDRC_MODE_NORMAL_CMD EQU (0x0) ;- (SDRC) Normal Mode
+AT91C_SDRC_MODE_NOP_CMD   EQU (0x1) ;- (SDRC) NOP Command
+AT91C_SDRC_MODE_PRCGALL_CMD EQU (0x2) ;- (SDRC) All Banks Precharge Command
+AT91C_SDRC_MODE_LMR_CMD   EQU (0x3) ;- (SDRC) Load Mode Register Command
+AT91C_SDRC_MODE_RFSH_CMD  EQU (0x4) ;- (SDRC) Refresh Command
+AT91C_SDRC_DBW            EQU (0x1:SHL:4) ;- (SDRC) Data Bus Width
+AT91C_SDRC_DBW_32_BITS    EQU (0x0:SHL:4) ;- (SDRC) 32 Bits datas bus
+AT91C_SDRC_DBW_16_BITS    EQU (0x1:SHL:4) ;- (SDRC) 16 Bits datas bus
+;- -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- 
+AT91C_SDRC_COUNT          EQU (0xFFF:SHL:0) ;- (SDRC) Refresh Counter
+;- -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- 
+AT91C_SDRC_NC             EQU (0x3:SHL:0) ;- (SDRC) Number of Column Bits
+AT91C_SDRC_NC_8           EQU (0x0) ;- (SDRC) 8 Bits
+AT91C_SDRC_NC_9           EQU (0x1) ;- (SDRC) 9 Bits
+AT91C_SDRC_NC_10          EQU (0x2) ;- (SDRC) 10 Bits
+AT91C_SDRC_NC_11          EQU (0x3) ;- (SDRC) 11 Bits
+AT91C_SDRC_NR             EQU (0x3:SHL:2) ;- (SDRC) Number of Row Bits
+AT91C_SDRC_NR_11          EQU (0x0:SHL:2) ;- (SDRC) 11 Bits
+AT91C_SDRC_NR_12          EQU (0x1:SHL:2) ;- (SDRC) 12 Bits
+AT91C_SDRC_NR_13          EQU (0x2:SHL:2) ;- (SDRC) 13 Bits
+AT91C_SDRC_NB             EQU (0x1:SHL:4) ;- (SDRC) Number of Banks
+AT91C_SDRC_NB_2_BANKS     EQU (0x0:SHL:4) ;- (SDRC) 2 banks
+AT91C_SDRC_NB_4_BANKS     EQU (0x1:SHL:4) ;- (SDRC) 4 banks
+AT91C_SDRC_CAS            EQU (0x3:SHL:5) ;- (SDRC) CAS Latency
+AT91C_SDRC_CAS_2          EQU (0x2:SHL:5) ;- (SDRC) 2 cycles
+AT91C_SDRC_TWR            EQU (0xF:SHL:7) ;- (SDRC) Number of Write Recovery Time Cycles
+AT91C_SDRC_TRC            EQU (0xF:SHL:11) ;- (SDRC) Number of RAS Cycle Time Cycles
+AT91C_SDRC_TRP            EQU (0xF:SHL:15) ;- (SDRC) Number of RAS Precharge Time Cycles
+AT91C_SDRC_TRCD           EQU (0xF:SHL:19) ;- (SDRC) Number of RAS to CAS Delay Cycles
+AT91C_SDRC_TRAS           EQU (0xF:SHL:23) ;- (SDRC) Number of RAS Active Time Cycles
+AT91C_SDRC_TXSR           EQU (0xF:SHL:27) ;- (SDRC) Number of Command Recovery Time Cycles
+;- -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- 
+AT91C_SDRC_SRCB           EQU (0x1:SHL:0) ;- (SDRC) Self-refresh Command Bit
+;- -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- 
+AT91C_SDRC_LPCB           EQU (0x1:SHL:0) ;- (SDRC) Low-power Command Bit
+;- -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- 
+AT91C_SDRC_RES            EQU (0x1:SHL:0) ;- (SDRC) Refresh Error Status
+;- -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- 
+;- -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- 
+;- -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Burst Flash Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_BFC
+BFC_MR          #  4 ;- BFC Mode Register
+;- -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- 
+AT91C_BFC_BFCOM           EQU (0x3:SHL:0) ;- (BFC) Burst Flash Controller Operating Mode
+AT91C_BFC_BFCOM_DISABLED  EQU (0x0) ;- (BFC) NPCS0 is driven by the SMC or remains high.
+AT91C_BFC_BFCOM_ASYNC     EQU (0x1) ;- (BFC) Asynchronous
+AT91C_BFC_BFCOM_BURST_READ EQU (0x2) ;- (BFC) Burst Read
+AT91C_BFC_BFCC            EQU (0x3:SHL:2) ;- (BFC) Burst Flash Controller Operating Mode
+AT91C_BFC_BFCC_MCK        EQU (0x1:SHL:2) ;- (BFC) Master Clock.
+AT91C_BFC_BFCC_MCK_DIV_2  EQU (0x2:SHL:2) ;- (BFC) Master Clock divided by 2.
+AT91C_BFC_BFCC_MCK_DIV_4  EQU (0x3:SHL:2) ;- (BFC) Master Clock divided by 4.
+AT91C_BFC_AVL             EQU (0xF:SHL:4) ;- (BFC) Address Valid Latency
+AT91C_BFC_PAGES           EQU (0x7:SHL:8) ;- (BFC) Page Size
+AT91C_BFC_PAGES_NO_PAGE   EQU (0x0:SHL:8) ;- (BFC) No page handling.
+AT91C_BFC_PAGES_16        EQU (0x1:SHL:8) ;- (BFC) 16 bytes page size.
+AT91C_BFC_PAGES_32        EQU (0x2:SHL:8) ;- (BFC) 32 bytes page size.
+AT91C_BFC_PAGES_64        EQU (0x3:SHL:8) ;- (BFC) 64 bytes page size.
+AT91C_BFC_PAGES_128       EQU (0x4:SHL:8) ;- (BFC) 128 bytes page size.
+AT91C_BFC_PAGES_256       EQU (0x5:SHL:8) ;- (BFC) 256 bytes page size.
+AT91C_BFC_PAGES_512       EQU (0x6:SHL:8) ;- (BFC) 512 bytes page size.
+AT91C_BFC_PAGES_1024      EQU (0x7:SHL:8) ;- (BFC) 1024 bytes page size.
+AT91C_BFC_OEL             EQU (0x3:SHL:12) ;- (BFC) Output Enable Latency
+AT91C_BFC_BAAEN           EQU (0x1:SHL:16) ;- (BFC) Burst Address Advance Enable
+AT91C_BFC_BFOEH           EQU (0x1:SHL:17) ;- (BFC) Burst Flash Output Enable Handling
+AT91C_BFC_MUXEN           EQU (0x1:SHL:18) ;- (BFC) Multiplexed Bus Enable
+AT91C_BFC_RDYEN           EQU (0x1:SHL:19) ;- (BFC) Ready Enable Mode
+
+;- *****************************************************************************
+;-               REGISTER ADDRESS DEFINITION FOR AT91RM9200
+;- *****************************************************************************
+;- ========== Register definition for SYS peripheral ========== 
+;- ========== Register definition for MC peripheral ========== 
+AT91C_MC_PUER             EQU (0xFFFFFF54) ;- (MC) MC Protection Unit Enable Register
+AT91C_MC_ASR              EQU (0xFFFFFF04) ;- (MC) MC Abort Status Register
+AT91C_MC_PUP              EQU (0xFFFFFF50) ;- (MC) MC Protection Unit Peripherals
+AT91C_MC_PUIA             EQU (0xFFFFFF10) ;- (MC) MC Protection Unit Area
+AT91C_MC_AASR             EQU (0xFFFFFF08) ;- (MC) MC Abort Address Status Register
+AT91C_MC_RCR              EQU (0xFFFFFF00) ;- (MC) MC Remap Control Register
+;- ========== Register definition for RTC peripheral ========== 
+AT91C_RTC_IMR             EQU (0xFFFFFE28) ;- (RTC) Interrupt Mask Register
+AT91C_RTC_IER             EQU (0xFFFFFE20) ;- (RTC) Interrupt Enable Register
+AT91C_RTC_SR              EQU (0xFFFFFE18) ;- (RTC) Status Register
+AT91C_RTC_TIMALR          EQU (0xFFFFFE10) ;- (RTC) Time Alarm Register
+AT91C_RTC_TIMR            EQU (0xFFFFFE08) ;- (RTC) Time Register
+AT91C_RTC_CR              EQU (0xFFFFFE00) ;- (RTC) Control Register
+AT91C_RTC_VER             EQU (0xFFFFFE2C) ;- (RTC) Valid Entry Register
+AT91C_RTC_IDR             EQU (0xFFFFFE24) ;- (RTC) Interrupt Disable Register
+AT91C_RTC_SCCR            EQU (0xFFFFFE1C) ;- (RTC) Status Clear Command Register
+AT91C_RTC_CALALR          EQU (0xFFFFFE14) ;- (RTC) Calendar Alarm Register
+AT91C_RTC_CALR            EQU (0xFFFFFE0C) ;- (RTC) Calendar Register
+AT91C_RTC_MR              EQU (0xFFFFFE04) ;- (RTC) Mode Register
+;- ========== Register definition for ST peripheral ========== 
+AT91C_ST_CRTR             EQU (0xFFFFFD24) ;- (ST) Current Real-time Register
+AT91C_ST_IMR              EQU (0xFFFFFD1C) ;- (ST) Interrupt Mask Register
+AT91C_ST_IER              EQU (0xFFFFFD14) ;- (ST) Interrupt Enable Register
+AT91C_ST_RTMR             EQU (0xFFFFFD0C) ;- (ST) Real-time Mode Register
+AT91C_ST_PIMR             EQU (0xFFFFFD04) ;- (ST) Period Interval Mode Register
+AT91C_ST_RTAR             EQU (0xFFFFFD20) ;- (ST) Real-time Alarm Register
+AT91C_ST_IDR              EQU (0xFFFFFD18) ;- (ST) Interrupt Disable Register
+AT91C_ST_SR               EQU (0xFFFFFD10) ;- (ST) Status Register
+AT91C_ST_WDMR             EQU (0xFFFFFD08) ;- (ST) Watchdog Mode Register
+AT91C_ST_CR               EQU (0xFFFFFD00) ;- (ST) Control Register
+;- ========== Register definition for PMC peripheral ========== 
+AT91C_PMC_SCSR            EQU (0xFFFFFC08) ;- (PMC) System Clock Status Register
+AT91C_PMC_SCER            EQU (0xFFFFFC00) ;- (PMC) System Clock Enable Register
+AT91C_PMC_IMR             EQU (0xFFFFFC6C) ;- (PMC) Interrupt Mask Register
+AT91C_PMC_IDR             EQU (0xFFFFFC64) ;- (PMC) Interrupt Disable Register
+AT91C_PMC_PCDR            EQU (0xFFFFFC14) ;- (PMC) Peripheral Clock Disable Register
+AT91C_PMC_SCDR            EQU (0xFFFFFC04) ;- (PMC) System Clock Disable Register
+AT91C_PMC_SR              EQU (0xFFFFFC68) ;- (PMC) Status Register
+AT91C_PMC_IER             EQU (0xFFFFFC60) ;- (PMC) Interrupt Enable Register
+AT91C_PMC_MCKR            EQU (0xFFFFFC30) ;- (PMC) Master Clock Register
+AT91C_PMC_PCER            EQU (0xFFFFFC10) ;- (PMC) Peripheral Clock Enable Register
+AT91C_PMC_PCSR            EQU (0xFFFFFC18) ;- (PMC) Peripheral Clock Status Register
+AT91C_PMC_PCKR            EQU (0xFFFFFC40) ;- (PMC) Programmable Clock Register
+;- ========== Register definition for CKGR peripheral ========== 
+AT91C_CKGR_PLLBR          EQU (0xFFFFFC2C) ;- (CKGR) PLL B Register
+AT91C_CKGR_MCFR           EQU (0xFFFFFC24) ;- (CKGR) Main Clock  Frequency Register
+AT91C_CKGR_PLLAR          EQU (0xFFFFFC28) ;- (CKGR) PLL A Register
+AT91C_CKGR_MOR            EQU (0xFFFFFC20) ;- (CKGR) Main Oscillator Register
+;- ========== Register definition for PIOD peripheral ========== 
+AT91C_PIOD_PDSR           EQU (0xFFFFFA3C) ;- (PIOD) Pin Data Status Register
+AT91C_PIOD_CODR           EQU (0xFFFFFA34) ;- (PIOD) Clear Output Data Register
+AT91C_PIOD_OWER           EQU (0xFFFFFAA0) ;- (PIOD) Output Write Enable Register
+AT91C_PIOD_MDER           EQU (0xFFFFFA50) ;- (PIOD) Multi-driver Enable Register
+AT91C_PIOD_IMR            EQU (0xFFFFFA48) ;- (PIOD) Interrupt Mask Register
+AT91C_PIOD_IER            EQU (0xFFFFFA40) ;- (PIOD) Interrupt Enable Register
+AT91C_PIOD_ODSR           EQU (0xFFFFFA38) ;- (PIOD) Output Data Status Register
+AT91C_PIOD_SODR           EQU (0xFFFFFA30) ;- (PIOD) Set Output Data Register
+AT91C_PIOD_PER            EQU (0xFFFFFA00) ;- (PIOD) PIO Enable Register
+AT91C_PIOD_OWDR           EQU (0xFFFFFAA4) ;- (PIOD) Output Write Disable Register
+AT91C_PIOD_PPUER          EQU (0xFFFFFA64) ;- (PIOD) Pull-up Enable Register
+AT91C_PIOD_MDDR           EQU (0xFFFFFA54) ;- (PIOD) Multi-driver Disable Register
+AT91C_PIOD_ISR            EQU (0xFFFFFA4C) ;- (PIOD) Interrupt Status Register
+AT91C_PIOD_IDR            EQU (0xFFFFFA44) ;- (PIOD) Interrupt Disable Register
+AT91C_PIOD_PDR            EQU (0xFFFFFA04) ;- (PIOD) PIO Disable Register
+AT91C_PIOD_ODR            EQU (0xFFFFFA14) ;- (PIOD) Output Disable Registerr
+AT91C_PIOD_OWSR           EQU (0xFFFFFAA8) ;- (PIOD) Output Write Status Register
+AT91C_PIOD_ABSR           EQU (0xFFFFFA78) ;- (PIOD) AB Select Status Register
+AT91C_PIOD_ASR            EQU (0xFFFFFA70) ;- (PIOD) Select A Register
+AT91C_PIOD_PPUSR          EQU (0xFFFFFA68) ;- (PIOD) Pad Pull-up Status Register
+AT91C_PIOD_PPUDR          EQU (0xFFFFFA60) ;- (PIOD) Pull-up Disable Register
+AT91C_PIOD_MDSR           EQU (0xFFFFFA58) ;- (PIOD) Multi-driver Status Register
+AT91C_PIOD_PSR            EQU (0xFFFFFA08) ;- (PIOD) PIO Status Register
+AT91C_PIOD_OER            EQU (0xFFFFFA10) ;- (PIOD) Output Enable Register
+AT91C_PIOD_OSR            EQU (0xFFFFFA18) ;- (PIOD) Output Status Register
+AT91C_PIOD_IFER           EQU (0xFFFFFA20) ;- (PIOD) Input Filter Enable Register
+AT91C_PIOD_BSR            EQU (0xFFFFFA74) ;- (PIOD) Select B Register
+AT91C_PIOD_IFDR           EQU (0xFFFFFA24) ;- (PIOD) Input Filter Disable Register
+AT91C_PIOD_IFSR           EQU (0xFFFFFA28) ;- (PIOD) Input Filter Status Register
+;- ========== Register definition for PIOC peripheral ========== 
+AT91C_PIOC_IFDR           EQU (0xFFFFF824) ;- (PIOC) Input Filter Disable Register
+AT91C_PIOC_ODR            EQU (0xFFFFF814) ;- (PIOC) Output Disable Registerr
+AT91C_PIOC_ABSR           EQU (0xFFFFF878) ;- (PIOC) AB Select Status Register
+AT91C_PIOC_SODR           EQU (0xFFFFF830) ;- (PIOC) Set Output Data Register
+AT91C_PIOC_IFSR           EQU (0xFFFFF828) ;- (PIOC) Input Filter Status Register
+AT91C_PIOC_CODR           EQU (0xFFFFF834) ;- (PIOC) Clear Output Data Register
+AT91C_PIOC_ODSR           EQU (0xFFFFF838) ;- (PIOC) Output Data Status Register
+AT91C_PIOC_IER            EQU (0xFFFFF840) ;- (PIOC) Interrupt Enable Register
+AT91C_PIOC_IMR            EQU (0xFFFFF848) ;- (PIOC) Interrupt Mask Register
+AT91C_PIOC_OWDR           EQU (0xFFFFF8A4) ;- (PIOC) Output Write Disable Register
+AT91C_PIOC_MDDR           EQU (0xFFFFF854) ;- (PIOC) Multi-driver Disable Register
+AT91C_PIOC_PDSR           EQU (0xFFFFF83C) ;- (PIOC) Pin Data Status Register
+AT91C_PIOC_IDR            EQU (0xFFFFF844) ;- (PIOC) Interrupt Disable Register
+AT91C_PIOC_ISR            EQU (0xFFFFF84C) ;- (PIOC) Interrupt Status Register
+AT91C_PIOC_PDR            EQU (0xFFFFF804) ;- (PIOC) PIO Disable Register
+AT91C_PIOC_OWSR           EQU (0xFFFFF8A8) ;- (PIOC) Output Write Status Register
+AT91C_PIOC_OWER           EQU (0xFFFFF8A0) ;- (PIOC) Output Write Enable Register
+AT91C_PIOC_ASR            EQU (0xFFFFF870) ;- (PIOC) Select A Register
+AT91C_PIOC_PPUSR          EQU (0xFFFFF868) ;- (PIOC) Pad Pull-up Status Register
+AT91C_PIOC_PPUDR          EQU (0xFFFFF860) ;- (PIOC) Pull-up Disable Register
+AT91C_PIOC_MDSR           EQU (0xFFFFF858) ;- (PIOC) Multi-driver Status Register
+AT91C_PIOC_MDER           EQU (0xFFFFF850) ;- (PIOC) Multi-driver Enable Register
+AT91C_PIOC_IFER           EQU (0xFFFFF820) ;- (PIOC) Input Filter Enable Register
+AT91C_PIOC_OSR            EQU (0xFFFFF818) ;- (PIOC) Output Status Register
+AT91C_PIOC_OER            EQU (0xFFFFF810) ;- (PIOC) Output Enable Register
+AT91C_PIOC_PSR            EQU (0xFFFFF808) ;- (PIOC) PIO Status Register
+AT91C_PIOC_PER            EQU (0xFFFFF800) ;- (PIOC) PIO Enable Register
+AT91C_PIOC_BSR            EQU (0xFFFFF874) ;- (PIOC) Select B Register
+AT91C_PIOC_PPUER          EQU (0xFFFFF864) ;- (PIOC) Pull-up Enable Register
+;- ========== Register definition for PIOB peripheral ========== 
+AT91C_PIOB_OWSR           EQU (0xFFFFF6A8) ;- (PIOB) Output Write Status Register
+AT91C_PIOB_PPUSR          EQU (0xFFFFF668) ;- (PIOB) Pad Pull-up Status Register
+AT91C_PIOB_PPUDR          EQU (0xFFFFF660) ;- (PIOB) Pull-up Disable Register
+AT91C_PIOB_MDSR           EQU (0xFFFFF658) ;- (PIOB) Multi-driver Status Register
+AT91C_PIOB_MDER           EQU (0xFFFFF650) ;- (PIOB) Multi-driver Enable Register
+AT91C_PIOB_IMR            EQU (0xFFFFF648) ;- (PIOB) Interrupt Mask Register
+AT91C_PIOB_OSR            EQU (0xFFFFF618) ;- (PIOB) Output Status Register
+AT91C_PIOB_OER            EQU (0xFFFFF610) ;- (PIOB) Output Enable Register
+AT91C_PIOB_PSR            EQU (0xFFFFF608) ;- (PIOB) PIO Status Register
+AT91C_PIOB_PER            EQU (0xFFFFF600) ;- (PIOB) PIO Enable Register
+AT91C_PIOB_BSR            EQU (0xFFFFF674) ;- (PIOB) Select B Register
+AT91C_PIOB_PPUER          EQU (0xFFFFF664) ;- (PIOB) Pull-up Enable Register
+AT91C_PIOB_IFDR           EQU (0xFFFFF624) ;- (PIOB) Input Filter Disable Register
+AT91C_PIOB_ODR            EQU (0xFFFFF614) ;- (PIOB) Output Disable Registerr
+AT91C_PIOB_ABSR           EQU (0xFFFFF678) ;- (PIOB) AB Select Status Register
+AT91C_PIOB_ASR            EQU (0xFFFFF670) ;- (PIOB) Select A Register
+AT91C_PIOB_IFER           EQU (0xFFFFF620) ;- (PIOB) Input Filter Enable Register
+AT91C_PIOB_IFSR           EQU (0xFFFFF628) ;- (PIOB) Input Filter Status Register
+AT91C_PIOB_SODR           EQU (0xFFFFF630) ;- (PIOB) Set Output Data Register
+AT91C_PIOB_ODSR           EQU (0xFFFFF638) ;- (PIOB) Output Data Status Register
+AT91C_PIOB_CODR           EQU (0xFFFFF634) ;- (PIOB) Clear Output Data Register
+AT91C_PIOB_PDSR           EQU (0xFFFFF63C) ;- (PIOB) Pin Data Status Register
+AT91C_PIOB_OWER           EQU (0xFFFFF6A0) ;- (PIOB) Output Write Enable Register
+AT91C_PIOB_IER            EQU (0xFFFFF640) ;- (PIOB) Interrupt Enable Register
+AT91C_PIOB_OWDR           EQU (0xFFFFF6A4) ;- (PIOB) Output Write Disable Register
+AT91C_PIOB_MDDR           EQU (0xFFFFF654) ;- (PIOB) Multi-driver Disable Register
+AT91C_PIOB_ISR            EQU (0xFFFFF64C) ;- (PIOB) Interrupt Status Register
+AT91C_PIOB_IDR            EQU (0xFFFFF644) ;- (PIOB) Interrupt Disable Register
+AT91C_PIOB_PDR            EQU (0xFFFFF604) ;- (PIOB) PIO Disable Register
+;- ========== Register definition for PIOA peripheral ========== 
+AT91C_PIOA_IMR            EQU (0xFFFFF448) ;- (PIOA) Interrupt Mask Register
+AT91C_PIOA_IER            EQU (0xFFFFF440) ;- (PIOA) Interrupt Enable Register
+AT91C_PIOA_OWDR           EQU (0xFFFFF4A4) ;- (PIOA) Output Write Disable Register
+AT91C_PIOA_ISR            EQU (0xFFFFF44C) ;- (PIOA) Interrupt Status Register
+AT91C_PIOA_PPUDR          EQU (0xFFFFF460) ;- (PIOA) Pull-up Disable Register
+AT91C_PIOA_MDSR           EQU (0xFFFFF458) ;- (PIOA) Multi-driver Status Register
+AT91C_PIOA_MDER           EQU (0xFFFFF450) ;- (PIOA) Multi-driver Enable Register
+AT91C_PIOA_PER            EQU (0xFFFFF400) ;- (PIOA) PIO Enable Register
+AT91C_PIOA_PSR            EQU (0xFFFFF408) ;- (PIOA) PIO Status Register
+AT91C_PIOA_OER            EQU (0xFFFFF410) ;- (PIOA) Output Enable Register
+AT91C_PIOA_BSR            EQU (0xFFFFF474) ;- (PIOA) Select B Register
+AT91C_PIOA_PPUER          EQU (0xFFFFF464) ;- (PIOA) Pull-up Enable Register
+AT91C_PIOA_MDDR           EQU (0xFFFFF454) ;- (PIOA) Multi-driver Disable Register
+AT91C_PIOA_PDR            EQU (0xFFFFF404) ;- (PIOA) PIO Disable Register
+AT91C_PIOA_ODR            EQU (0xFFFFF414) ;- (PIOA) Output Disable Registerr
+AT91C_PIOA_IFDR           EQU (0xFFFFF424) ;- (PIOA) Input Filter Disable Register
+AT91C_PIOA_ABSR           EQU (0xFFFFF478) ;- (PIOA) AB Select Status Register
+AT91C_PIOA_ASR            EQU (0xFFFFF470) ;- (PIOA) Select A Register
+AT91C_PIOA_PPUSR          EQU (0xFFFFF468) ;- (PIOA) Pad Pull-up Status Register
+AT91C_PIOA_ODSR           EQU (0xFFFFF438) ;- (PIOA) Output Data Status Register
+AT91C_PIOA_SODR           EQU (0xFFFFF430) ;- (PIOA) Set Output Data Register
+AT91C_PIOA_IFSR           EQU (0xFFFFF428) ;- (PIOA) Input Filter Status Register
+AT91C_PIOA_IFER           EQU (0xFFFFF420) ;- (PIOA) Input Filter Enable Register
+AT91C_PIOA_OSR            EQU (0xFFFFF418) ;- (PIOA) Output Status Register
+AT91C_PIOA_IDR            EQU (0xFFFFF444) ;- (PIOA) Interrupt Disable Register
+AT91C_PIOA_PDSR           EQU (0xFFFFF43C) ;- (PIOA) Pin Data Status Register
+AT91C_PIOA_CODR           EQU (0xFFFFF434) ;- (PIOA) Clear Output Data Register
+AT91C_PIOA_OWSR           EQU (0xFFFFF4A8) ;- (PIOA) Output Write Status Register
+AT91C_PIOA_OWER           EQU (0xFFFFF4A0) ;- (PIOA) Output Write Enable Register
+;- ========== Register definition for DBGU peripheral ========== 
+AT91C_DBGU_C2R            EQU (0xFFFFF244) ;- (DBGU) Chip ID2 Register
+AT91C_DBGU_THR            EQU (0xFFFFF21C) ;- (DBGU) Transmitter Holding Register
+AT91C_DBGU_CSR            EQU (0xFFFFF214) ;- (DBGU) Channel Status Register
+AT91C_DBGU_IDR            EQU (0xFFFFF20C) ;- (DBGU) Interrupt Disable Register
+AT91C_DBGU_MR             EQU (0xFFFFF204) ;- (DBGU) Mode Register
+AT91C_DBGU_FNTR           EQU (0xFFFFF248) ;- (DBGU) Force NTRST Register
+AT91C_DBGU_C1R            EQU (0xFFFFF240) ;- (DBGU) Chip ID1 Register
+AT91C_DBGU_BRGR           EQU (0xFFFFF220) ;- (DBGU) Baud Rate Generator Register
+AT91C_DBGU_RHR            EQU (0xFFFFF218) ;- (DBGU) Receiver Holding Register
+AT91C_DBGU_IMR            EQU (0xFFFFF210) ;- (DBGU) Interrupt Mask Register
+AT91C_DBGU_IER            EQU (0xFFFFF208) ;- (DBGU) Interrupt Enable Register
+AT91C_DBGU_CR             EQU (0xFFFFF200) ;- (DBGU) Control Register
+;- ========== Register definition for PDC_DBGU peripheral ========== 
+AT91C_DBGU_TNCR           EQU (0xFFFFF31C) ;- (PDC_DBGU) Transmit Next Counter Register
+AT91C_DBGU_RNCR           EQU (0xFFFFF314) ;- (PDC_DBGU) Receive Next Counter Register
+AT91C_DBGU_PTCR           EQU (0xFFFFF320) ;- (PDC_DBGU) PDC Transfer Control Register
+AT91C_DBGU_PTSR           EQU (0xFFFFF324) ;- (PDC_DBGU) PDC Transfer Status Register
+AT91C_DBGU_RCR            EQU (0xFFFFF304) ;- (PDC_DBGU) Receive Counter Register
+AT91C_DBGU_TCR            EQU (0xFFFFF30C) ;- (PDC_DBGU) Transmit Counter Register
+AT91C_DBGU_RPR            EQU (0xFFFFF300) ;- (PDC_DBGU) Receive Pointer Register
+AT91C_DBGU_TPR            EQU (0xFFFFF308) ;- (PDC_DBGU) Transmit Pointer Register
+AT91C_DBGU_RNPR           EQU (0xFFFFF310) ;- (PDC_DBGU) Receive Next Pointer Register
+AT91C_DBGU_TNPR           EQU (0xFFFFF318) ;- (PDC_DBGU) Transmit Next Pointer Register
+;- ========== Register definition for AIC peripheral ========== 
+AT91C_AIC_ICCR            EQU (0xFFFFF128) ;- (AIC) Interrupt Clear Command Register
+AT91C_AIC_IECR            EQU (0xFFFFF120) ;- (AIC) Interrupt Enable Command Register
+AT91C_AIC_SMR             EQU (0xFFFFF000) ;- (AIC) Source Mode Register
+AT91C_AIC_ISCR            EQU (0xFFFFF12C) ;- (AIC) Interrupt Set Command Register
+AT91C_AIC_EOICR           EQU (0xFFFFF130) ;- (AIC) End of Interrupt Command Register
+AT91C_AIC_DCR             EQU (0xFFFFF138) ;- (AIC) Debug Control Register (Protect)
+AT91C_AIC_FFER            EQU (0xFFFFF140) ;- (AIC) Fast Forcing Enable Register
+AT91C_AIC_SVR             EQU (0xFFFFF080) ;- (AIC) Source Vector Register
+AT91C_AIC_SPU             EQU (0xFFFFF134) ;- (AIC) Spurious Vector Register
+AT91C_AIC_FFDR            EQU (0xFFFFF144) ;- (AIC) Fast Forcing Disable Register
+AT91C_AIC_FVR             EQU (0xFFFFF104) ;- (AIC) FIQ Vector Register
+AT91C_AIC_FFSR            EQU (0xFFFFF148) ;- (AIC) Fast Forcing Status Register
+AT91C_AIC_IMR             EQU (0xFFFFF110) ;- (AIC) Interrupt Mask Register
+AT91C_AIC_ISR             EQU (0xFFFFF108) ;- (AIC) Interrupt Status Register
+AT91C_AIC_IVR             EQU (0xFFFFF100) ;- (AIC) IRQ Vector Register
+AT91C_AIC_IDCR            EQU (0xFFFFF124) ;- (AIC) Interrupt Disable Command Register
+AT91C_AIC_CISR            EQU (0xFFFFF114) ;- (AIC) Core Interrupt Status Register
+AT91C_AIC_IPR             EQU (0xFFFFF10C) ;- (AIC) Interrupt Pending Register
+;- ========== Register definition for PDC_SPI peripheral ========== 
+AT91C_SPI_PTCR            EQU (0xFFFE0120) ;- (PDC_SPI) PDC Transfer Control Register
+AT91C_SPI_TNPR            EQU (0xFFFE0118) ;- (PDC_SPI) Transmit Next Pointer Register
+AT91C_SPI_RNPR            EQU (0xFFFE0110) ;- (PDC_SPI) Receive Next Pointer Register
+AT91C_SPI_TPR             EQU (0xFFFE0108) ;- (PDC_SPI) Transmit Pointer Register
+AT91C_SPI_RPR             EQU (0xFFFE0100) ;- (PDC_SPI) Receive Pointer Register
+AT91C_SPI_PTSR            EQU (0xFFFE0124) ;- (PDC_SPI) PDC Transfer Status Register
+AT91C_SPI_TNCR            EQU (0xFFFE011C) ;- (PDC_SPI) Transmit Next Counter Register
+AT91C_SPI_RNCR            EQU (0xFFFE0114) ;- (PDC_SPI) Receive Next Counter Register
+AT91C_SPI_TCR             EQU (0xFFFE010C) ;- (PDC_SPI) Transmit Counter Register
+AT91C_SPI_RCR             EQU (0xFFFE0104) ;- (PDC_SPI) Receive Counter Register
+;- ========== Register definition for SPI peripheral ========== 
+AT91C_SPI_CSR             EQU (0xFFFE0030) ;- (SPI) Chip Select Register
+AT91C_SPI_IDR             EQU (0xFFFE0018) ;- (SPI) Interrupt Disable Register
+AT91C_SPI_SR              EQU (0xFFFE0010) ;- (SPI) Status Register
+AT91C_SPI_RDR             EQU (0xFFFE0008) ;- (SPI) Receive Data Register
+AT91C_SPI_CR              EQU (0xFFFE0000) ;- (SPI) Control Register
+AT91C_SPI_IMR             EQU (0xFFFE001C) ;- (SPI) Interrupt Mask Register
+AT91C_SPI_IER             EQU (0xFFFE0014) ;- (SPI) Interrupt Enable Register
+AT91C_SPI_TDR             EQU (0xFFFE000C) ;- (SPI) Transmit Data Register
+AT91C_SPI_MR              EQU (0xFFFE0004) ;- (SPI) Mode Register
+;- ========== Register definition for PDC_SSC2 peripheral ========== 
+AT91C_SSC2_PTCR           EQU (0xFFFD8120) ;- (PDC_SSC2) PDC Transfer Control Register
+AT91C_SSC2_TNPR           EQU (0xFFFD8118) ;- (PDC_SSC2) Transmit Next Pointer Register
+AT91C_SSC2_RNPR           EQU (0xFFFD8110) ;- (PDC_SSC2) Receive Next Pointer Register
+AT91C_SSC2_TPR            EQU (0xFFFD8108) ;- (PDC_SSC2) Transmit Pointer Register
+AT91C_SSC2_RPR            EQU (0xFFFD8100) ;- (PDC_SSC2) Receive Pointer Register
+AT91C_SSC2_PTSR           EQU (0xFFFD8124) ;- (PDC_SSC2) PDC Transfer Status Register
+AT91C_SSC2_TNCR           EQU (0xFFFD811C) ;- (PDC_SSC2) Transmit Next Counter Register
+AT91C_SSC2_RNCR           EQU (0xFFFD8114) ;- (PDC_SSC2) Receive Next Counter Register
+AT91C_SSC2_TCR            EQU (0xFFFD810C) ;- (PDC_SSC2) Transmit Counter Register
+AT91C_SSC2_RCR            EQU (0xFFFD8104) ;- (PDC_SSC2) Receive Counter Register
+;- ========== Register definition for SSC2 peripheral ========== 
+AT91C_SSC2_IMR            EQU (0xFFFD804C) ;- (SSC2) Interrupt Mask Register
+AT91C_SSC2_IER            EQU (0xFFFD8044) ;- (SSC2) Interrupt Enable Register
+AT91C_SSC2_RC1R           EQU (0xFFFD803C) ;- (SSC2) Receive Compare 1 Register
+AT91C_SSC2_TSHR           EQU (0xFFFD8034) ;- (SSC2) Transmit Sync Holding Register
+AT91C_SSC2_CMR            EQU (0xFFFD8004) ;- (SSC2) Clock Mode Register
+AT91C_SSC2_IDR            EQU (0xFFFD8048) ;- (SSC2) Interrupt Disable Register
+AT91C_SSC2_TCMR           EQU (0xFFFD8018) ;- (SSC2) Transmit Clock Mode Register
+AT91C_SSC2_RCMR           EQU (0xFFFD8010) ;- (SSC2) Receive Clock ModeRegister
+AT91C_SSC2_CR             EQU (0xFFFD8000) ;- (SSC2) Control Register
+AT91C_SSC2_RFMR           EQU (0xFFFD8014) ;- (SSC2) Receive Frame Mode Register
+AT91C_SSC2_TFMR           EQU (0xFFFD801C) ;- (SSC2) Transmit Frame Mode Register
+AT91C_SSC2_THR            EQU (0xFFFD8024) ;- (SSC2) Transmit Holding Register
+AT91C_SSC2_SR             EQU (0xFFFD8040) ;- (SSC2) Status Register
+AT91C_SSC2_RC0R           EQU (0xFFFD8038) ;- (SSC2) Receive Compare 0 Register
+AT91C_SSC2_RSHR           EQU (0xFFFD8030) ;- (SSC2) Receive Sync Holding Register
+AT91C_SSC2_RHR            EQU (0xFFFD8020) ;- (SSC2) Receive Holding Register
+;- ========== Register definition for PDC_SSC1 peripheral ========== 
+AT91C_SSC1_PTCR           EQU (0xFFFD4120) ;- (PDC_SSC1) PDC Transfer Control Register
+AT91C_SSC1_TNPR           EQU (0xFFFD4118) ;- (PDC_SSC1) Transmit Next Pointer Register
+AT91C_SSC1_RNPR           EQU (0xFFFD4110) ;- (PDC_SSC1) Receive Next Pointer Register
+AT91C_SSC1_TPR            EQU (0xFFFD4108) ;- (PDC_SSC1) Transmit Pointer Register
+AT91C_SSC1_RPR            EQU (0xFFFD4100) ;- (PDC_SSC1) Receive Pointer Register
+AT91C_SSC1_PTSR           EQU (0xFFFD4124) ;- (PDC_SSC1) PDC Transfer Status Register
+AT91C_SSC1_TNCR           EQU (0xFFFD411C) ;- (PDC_SSC1) Transmit Next Counter Register
+AT91C_SSC1_RNCR           EQU (0xFFFD4114) ;- (PDC_SSC1) Receive Next Counter Register
+AT91C_SSC1_TCR            EQU (0xFFFD410C) ;- (PDC_SSC1) Transmit Counter Register
+AT91C_SSC1_RCR            EQU (0xFFFD4104) ;- (PDC_SSC1) Receive Counter Register
+;- ========== Register definition for SSC1 peripheral ========== 
+AT91C_SSC1_RFMR           EQU (0xFFFD4014) ;- (SSC1) Receive Frame Mode Register
+AT91C_SSC1_CMR            EQU (0xFFFD4004) ;- (SSC1) Clock Mode Register
+AT91C_SSC1_IDR            EQU (0xFFFD4048) ;- (SSC1) Interrupt Disable Register
+AT91C_SSC1_SR             EQU (0xFFFD4040) ;- (SSC1) Status Register
+AT91C_SSC1_RC0R           EQU (0xFFFD4038) ;- (SSC1) Receive Compare 0 Register
+AT91C_SSC1_RSHR           EQU (0xFFFD4030) ;- (SSC1) Receive Sync Holding Register
+AT91C_SSC1_RHR            EQU (0xFFFD4020) ;- (SSC1) Receive Holding Register
+AT91C_SSC1_TCMR           EQU (0xFFFD4018) ;- (SSC1) Transmit Clock Mode Register
+AT91C_SSC1_RCMR           EQU (0xFFFD4010) ;- (SSC1) Receive Clock ModeRegister
+AT91C_SSC1_CR             EQU (0xFFFD4000) ;- (SSC1) Control Register
+AT91C_SSC1_IMR            EQU (0xFFFD404C) ;- (SSC1) Interrupt Mask Register
+AT91C_SSC1_IER            EQU (0xFFFD4044) ;- (SSC1) Interrupt Enable Register
+AT91C_SSC1_RC1R           EQU (0xFFFD403C) ;- (SSC1) Receive Compare 1 Register
+AT91C_SSC1_TSHR           EQU (0xFFFD4034) ;- (SSC1) Transmit Sync Holding Register
+AT91C_SSC1_THR            EQU (0xFFFD4024) ;- (SSC1) Transmit Holding Register
+AT91C_SSC1_TFMR           EQU (0xFFFD401C) ;- (SSC1) Transmit Frame Mode Register
+;- ========== Register definition for PDC_SSC0 peripheral ========== 
+AT91C_SSC0_PTCR           EQU (0xFFFD0120) ;- (PDC_SSC0) PDC Transfer Control Register
+AT91C_SSC0_TNPR           EQU (0xFFFD0118) ;- (PDC_SSC0) Transmit Next Pointer Register
+AT91C_SSC0_RNPR           EQU (0xFFFD0110) ;- (PDC_SSC0) Receive Next Pointer Register
+AT91C_SSC0_TPR            EQU (0xFFFD0108) ;- (PDC_SSC0) Transmit Pointer Register
+AT91C_SSC0_RPR            EQU (0xFFFD0100) ;- (PDC_SSC0) Receive Pointer Register
+AT91C_SSC0_PTSR           EQU (0xFFFD0124) ;- (PDC_SSC0) PDC Transfer Status Register
+AT91C_SSC0_TNCR           EQU (0xFFFD011C) ;- (PDC_SSC0) Transmit Next Counter Register
+AT91C_SSC0_RNCR           EQU (0xFFFD0114) ;- (PDC_SSC0) Receive Next Counter Register
+AT91C_SSC0_TCR            EQU (0xFFFD010C) ;- (PDC_SSC0) Transmit Counter Register
+AT91C_SSC0_RCR            EQU (0xFFFD0104) ;- (PDC_SSC0) Receive Counter Register
+;- ========== Register definition for SSC0 peripheral ========== 
+AT91C_SSC0_IMR            EQU (0xFFFD004C) ;- (SSC0) Interrupt Mask Register
+AT91C_SSC0_IER            EQU (0xFFFD0044) ;- (SSC0) Interrupt Enable Register
+AT91C_SSC0_RC1R           EQU (0xFFFD003C) ;- (SSC0) Receive Compare 1 Register
+AT91C_SSC0_TSHR           EQU (0xFFFD0034) ;- (SSC0) Transmit Sync Holding Register
+AT91C_SSC0_THR            EQU (0xFFFD0024) ;- (SSC0) Transmit Holding Register
+AT91C_SSC0_TFMR           EQU (0xFFFD001C) ;- (SSC0) Transmit Frame Mode Register
+AT91C_SSC0_RFMR           EQU (0xFFFD0014) ;- (SSC0) Receive Frame Mode Register
+AT91C_SSC0_CMR            EQU (0xFFFD0004) ;- (SSC0) Clock Mode Register
+AT91C_SSC0_IDR            EQU (0xFFFD0048) ;- (SSC0) Interrupt Disable Register
+AT91C_SSC0_SR             EQU (0xFFFD0040) ;- (SSC0) Status Register
+AT91C_SSC0_RC0R           EQU (0xFFFD0038) ;- (SSC0) Receive Compare 0 Register
+AT91C_SSC0_RSHR           EQU (0xFFFD0030) ;- (SSC0) Receive Sync Holding Register
+AT91C_SSC0_RHR            EQU (0xFFFD0020) ;- (SSC0) Receive Holding Register
+AT91C_SSC0_TCMR           EQU (0xFFFD0018) ;- (SSC0) Transmit Clock Mode Register
+AT91C_SSC0_RCMR           EQU (0xFFFD0010) ;- (SSC0) Receive Clock ModeRegister
+AT91C_SSC0_CR             EQU (0xFFFD0000) ;- (SSC0) Control Register
+;- ========== Register definition for PDC_US3 peripheral ========== 
+AT91C_US3_PTSR            EQU (0xFFFCC124) ;- (PDC_US3) PDC Transfer Status Register
+AT91C_US3_TNCR            EQU (0xFFFCC11C) ;- (PDC_US3) Transmit Next Counter Register
+AT91C_US3_RNCR            EQU (0xFFFCC114) ;- (PDC_US3) Receive Next Counter Register
+AT91C_US3_TCR             EQU (0xFFFCC10C) ;- (PDC_US3) Transmit Counter Register
+AT91C_US3_RCR             EQU (0xFFFCC104) ;- (PDC_US3) Receive Counter Register
+AT91C_US3_PTCR            EQU (0xFFFCC120) ;- (PDC_US3) PDC Transfer Control Register
+AT91C_US3_TNPR            EQU (0xFFFCC118) ;- (PDC_US3) Transmit Next Pointer Register
+AT91C_US3_RNPR            EQU (0xFFFCC110) ;- (PDC_US3) Receive Next Pointer Register
+AT91C_US3_TPR             EQU (0xFFFCC108) ;- (PDC_US3) Transmit Pointer Register
+AT91C_US3_RPR             EQU (0xFFFCC100) ;- (PDC_US3) Receive Pointer Register
+;- ========== Register definition for US3 peripheral ========== 
+AT91C_US3_IF              EQU (0xFFFCC04C) ;- (US3) IRDA_FILTER Register
+AT91C_US3_NER             EQU (0xFFFCC044) ;- (US3) Nb Errors Register
+AT91C_US3_RTOR            EQU (0xFFFCC024) ;- (US3) Receiver Time-out Register
+AT91C_US3_THR             EQU (0xFFFCC01C) ;- (US3) Transmitter Holding Register
+AT91C_US3_CSR             EQU (0xFFFCC014) ;- (US3) Channel Status Register
+AT91C_US3_IDR             EQU (0xFFFCC00C) ;- (US3) Interrupt Disable Register
+AT91C_US3_MR              EQU (0xFFFCC004) ;- (US3) Mode Register
+AT91C_US3_XXR             EQU (0xFFFCC048) ;- (US3) XON_XOFF Register
+AT91C_US3_FIDI            EQU (0xFFFCC040) ;- (US3) FI_DI_Ratio Register
+AT91C_US3_TTGR            EQU (0xFFFCC028) ;- (US3) Transmitter Time-guard Register
+AT91C_US3_BRGR            EQU (0xFFFCC020) ;- (US3) Baud Rate Generator Register
+AT91C_US3_RHR             EQU (0xFFFCC018) ;- (US3) Receiver Holding Register
+AT91C_US3_IMR             EQU (0xFFFCC010) ;- (US3) Interrupt Mask Register
+AT91C_US3_IER             EQU (0xFFFCC008) ;- (US3) Interrupt Enable Register
+AT91C_US3_CR              EQU (0xFFFCC000) ;- (US3) Control Register
+;- ========== Register definition for PDC_US2 peripheral ========== 
+AT91C_US2_PTSR            EQU (0xFFFC8124) ;- (PDC_US2) PDC Transfer Status Register
+AT91C_US2_TNCR            EQU (0xFFFC811C) ;- (PDC_US2) Transmit Next Counter Register
+AT91C_US2_RNCR            EQU (0xFFFC8114) ;- (PDC_US2) Receive Next Counter Register
+AT91C_US2_TCR             EQU (0xFFFC810C) ;- (PDC_US2) Transmit Counter Register
+AT91C_US2_PTCR            EQU (0xFFFC8120) ;- (PDC_US2) PDC Transfer Control Register
+AT91C_US2_RCR             EQU (0xFFFC8104) ;- (PDC_US2) Receive Counter Register
+AT91C_US2_TNPR            EQU (0xFFFC8118) ;- (PDC_US2) Transmit Next Pointer Register
+AT91C_US2_RPR             EQU (0xFFFC8100) ;- (PDC_US2) Receive Pointer Register
+AT91C_US2_TPR             EQU (0xFFFC8108) ;- (PDC_US2) Transmit Pointer Register
+AT91C_US2_RNPR            EQU (0xFFFC8110) ;- (PDC_US2) Receive Next Pointer Register
+;- ========== Register definition for US2 peripheral ========== 
+AT91C_US2_XXR             EQU (0xFFFC8048) ;- (US2) XON_XOFF Register
+AT91C_US2_FIDI            EQU (0xFFFC8040) ;- (US2) FI_DI_Ratio Register
+AT91C_US2_TTGR            EQU (0xFFFC8028) ;- (US2) Transmitter Time-guard Register
+AT91C_US2_BRGR            EQU (0xFFFC8020) ;- (US2) Baud Rate Generator Register
+AT91C_US2_RHR             EQU (0xFFFC8018) ;- (US2) Receiver Holding Register
+AT91C_US2_IMR             EQU (0xFFFC8010) ;- (US2) Interrupt Mask Register
+AT91C_US2_IER             EQU (0xFFFC8008) ;- (US2) Interrupt Enable Register
+AT91C_US2_CR              EQU (0xFFFC8000) ;- (US2) Control Register
+AT91C_US2_IF              EQU (0xFFFC804C) ;- (US2) IRDA_FILTER Register
+AT91C_US2_NER             EQU (0xFFFC8044) ;- (US2) Nb Errors Register
+AT91C_US2_RTOR            EQU (0xFFFC8024) ;- (US2) Receiver Time-out Register
+AT91C_US2_THR             EQU (0xFFFC801C) ;- (US2) Transmitter Holding Register
+AT91C_US2_CSR             EQU (0xFFFC8014) ;- (US2) Channel Status Register
+AT91C_US2_IDR             EQU (0xFFFC800C) ;- (US2) Interrupt Disable Register
+AT91C_US2_MR              EQU (0xFFFC8004) ;- (US2) Mode Register
+;- ========== Register definition for PDC_US1 peripheral ========== 
+AT91C_US1_PTSR            EQU (0xFFFC4124) ;- (PDC_US1) PDC Transfer Status Register
+AT91C_US1_TNCR            EQU (0xFFFC411C) ;- (PDC_US1) Transmit Next Counter Register
+AT91C_US1_RNCR            EQU (0xFFFC4114) ;- (PDC_US1) Receive Next Counter Register
+AT91C_US1_TCR             EQU (0xFFFC410C) ;- (PDC_US1) Transmit Counter Register
+AT91C_US1_RCR             EQU (0xFFFC4104) ;- (PDC_US1) Receive Counter Register
+AT91C_US1_PTCR            EQU (0xFFFC4120) ;- (PDC_US1) PDC Transfer Control Register
+AT91C_US1_TNPR            EQU (0xFFFC4118) ;- (PDC_US1) Transmit Next Pointer Register
+AT91C_US1_RNPR            EQU (0xFFFC4110) ;- (PDC_US1) Receive Next Pointer Register
+AT91C_US1_TPR             EQU (0xFFFC4108) ;- (PDC_US1) Transmit Pointer Register
+AT91C_US1_RPR             EQU (0xFFFC4100) ;- (PDC_US1) Receive Pointer Register
+;- ========== Register definition for US1 peripheral ========== 
+AT91C_US1_XXR             EQU (0xFFFC4048) ;- (US1) XON_XOFF Register
+AT91C_US1_RHR             EQU (0xFFFC4018) ;- (US1) Receiver Holding Register
+AT91C_US1_IMR             EQU (0xFFFC4010) ;- (US1) Interrupt Mask Register
+AT91C_US1_IER             EQU (0xFFFC4008) ;- (US1) Interrupt Enable Register
+AT91C_US1_CR              EQU (0xFFFC4000) ;- (US1) Control Register
+AT91C_US1_RTOR            EQU (0xFFFC4024) ;- (US1) Receiver Time-out Register
+AT91C_US1_THR             EQU (0xFFFC401C) ;- (US1) Transmitter Holding Register
+AT91C_US1_CSR             EQU (0xFFFC4014) ;- (US1) Channel Status Register
+AT91C_US1_IDR             EQU (0xFFFC400C) ;- (US1) Interrupt Disable Register
+AT91C_US1_FIDI            EQU (0xFFFC4040) ;- (US1) FI_DI_Ratio Register
+AT91C_US1_BRGR            EQU (0xFFFC4020) ;- (US1) Baud Rate Generator Register
+AT91C_US1_TTGR            EQU (0xFFFC4028) ;- (US1) Transmitter Time-guard Register
+AT91C_US1_IF              EQU (0xFFFC404C) ;- (US1) IRDA_FILTER Register
+AT91C_US1_NER             EQU (0xFFFC4044) ;- (US1) Nb Errors Register
+AT91C_US1_MR              EQU (0xFFFC4004) ;- (US1) Mode Register
+;- ========== Register definition for PDC_US0 peripheral ========== 
+AT91C_US0_PTCR            EQU (0xFFFC0120) ;- (PDC_US0) PDC Transfer Control Register
+AT91C_US0_TNPR            EQU (0xFFFC0118) ;- (PDC_US0) Transmit Next Pointer Register
+AT91C_US0_RNPR            EQU (0xFFFC0110) ;- (PDC_US0) Receive Next Pointer Register
+AT91C_US0_TPR             EQU (0xFFFC0108) ;- (PDC_US0) Transmit Pointer Register
+AT91C_US0_RPR             EQU (0xFFFC0100) ;- (PDC_US0) Receive Pointer Register
+AT91C_US0_PTSR            EQU (0xFFFC0124) ;- (PDC_US0) PDC Transfer Status Register
+AT91C_US0_TNCR            EQU (0xFFFC011C) ;- (PDC_US0) Transmit Next Counter Register
+AT91C_US0_RNCR            EQU (0xFFFC0114) ;- (PDC_US0) Receive Next Counter Register
+AT91C_US0_TCR             EQU (0xFFFC010C) ;- (PDC_US0) Transmit Counter Register
+AT91C_US0_RCR             EQU (0xFFFC0104) ;- (PDC_US0) Receive Counter Register
+;- ========== Register definition for US0 peripheral ========== 
+AT91C_US0_TTGR            EQU (0xFFFC0028) ;- (US0) Transmitter Time-guard Register
+AT91C_US0_BRGR            EQU (0xFFFC0020) ;- (US0) Baud Rate Generator Register
+AT91C_US0_RHR             EQU (0xFFFC0018) ;- (US0) Receiver Holding Register
+AT91C_US0_IMR             EQU (0xFFFC0010) ;- (US0) Interrupt Mask Register
+AT91C_US0_NER             EQU (0xFFFC0044) ;- (US0) Nb Errors Register
+AT91C_US0_RTOR            EQU (0xFFFC0024) ;- (US0) Receiver Time-out Register
+AT91C_US0_XXR             EQU (0xFFFC0048) ;- (US0) XON_XOFF Register
+AT91C_US0_FIDI            EQU (0xFFFC0040) ;- (US0) FI_DI_Ratio Register
+AT91C_US0_CR              EQU (0xFFFC0000) ;- (US0) Control Register
+AT91C_US0_IER             EQU (0xFFFC0008) ;- (US0) Interrupt Enable Register
+AT91C_US0_IF              EQU (0xFFFC004C) ;- (US0) IRDA_FILTER Register
+AT91C_US0_MR              EQU (0xFFFC0004) ;- (US0) Mode Register
+AT91C_US0_IDR             EQU (0xFFFC000C) ;- (US0) Interrupt Disable Register
+AT91C_US0_CSR             EQU (0xFFFC0014) ;- (US0) Channel Status Register
+AT91C_US0_THR             EQU (0xFFFC001C) ;- (US0) Transmitter Holding Register
+;- ========== Register definition for TWI peripheral ========== 
+AT91C_TWI_RHR             EQU (0xFFFB8030) ;- (TWI) Receive Holding Register
+AT91C_TWI_IDR             EQU (0xFFFB8028) ;- (TWI) Interrupt Disable Register
+AT91C_TWI_SR              EQU (0xFFFB8020) ;- (TWI) Status Register
+AT91C_TWI_CWGR            EQU (0xFFFB8010) ;- (TWI) Clock Waveform Generator Register
+AT91C_TWI_SMR             EQU (0xFFFB8008) ;- (TWI) Slave Mode Register
+AT91C_TWI_CR              EQU (0xFFFB8000) ;- (TWI) Control Register
+AT91C_TWI_THR             EQU (0xFFFB8034) ;- (TWI) Transmit Holding Register
+AT91C_TWI_IMR             EQU (0xFFFB802C) ;- (TWI) Interrupt Mask Register
+AT91C_TWI_IER             EQU (0xFFFB8024) ;- (TWI) Interrupt Enable Register
+AT91C_TWI_IADR            EQU (0xFFFB800C) ;- (TWI) Internal Address Register
+AT91C_TWI_MMR             EQU (0xFFFB8004) ;- (TWI) Master Mode Register
+;- ========== Register definition for PDC_MCI peripheral ========== 
+AT91C_MCI_PTCR            EQU (0xFFFB4120) ;- (PDC_MCI) PDC Transfer Control Register
+AT91C_MCI_TNPR            EQU (0xFFFB4118) ;- (PDC_MCI) Transmit Next Pointer Register
+AT91C_MCI_RNPR            EQU (0xFFFB4110) ;- (PDC_MCI) Receive Next Pointer Register
+AT91C_MCI_TPR             EQU (0xFFFB4108) ;- (PDC_MCI) Transmit Pointer Register
+AT91C_MCI_RPR             EQU (0xFFFB4100) ;- (PDC_MCI) Receive Pointer Register
+AT91C_MCI_PTSR            EQU (0xFFFB4124) ;- (PDC_MCI) PDC Transfer Status Register
+AT91C_MCI_TNCR            EQU (0xFFFB411C) ;- (PDC_MCI) Transmit Next Counter Register
+AT91C_MCI_RNCR            EQU (0xFFFB4114) ;- (PDC_MCI) Receive Next Counter Register
+AT91C_MCI_TCR             EQU (0xFFFB410C) ;- (PDC_MCI) Transmit Counter Register
+AT91C_MCI_RCR             EQU (0xFFFB4104) ;- (PDC_MCI) Receive Counter Register
+;- ========== Register definition for MCI peripheral ========== 
+AT91C_MCI_IDR             EQU (0xFFFB4048) ;- (MCI) MCI Interrupt Disable Register
+AT91C_MCI_SR              EQU (0xFFFB4040) ;- (MCI) MCI Status Register
+AT91C_MCI_RDR             EQU (0xFFFB4030) ;- (MCI) MCI Receive Data Register
+AT91C_MCI_RSPR            EQU (0xFFFB4020) ;- (MCI) MCI Response Register
+AT91C_MCI_ARGR            EQU (0xFFFB4010) ;- (MCI) MCI Argument Register
+AT91C_MCI_DTOR            EQU (0xFFFB4008) ;- (MCI) MCI Data Timeout Register
+AT91C_MCI_CR              EQU (0xFFFB4000) ;- (MCI) MCI Control Register
+AT91C_MCI_IMR             EQU (0xFFFB404C) ;- (MCI) MCI Interrupt Mask Register
+AT91C_MCI_IER             EQU (0xFFFB4044) ;- (MCI) MCI Interrupt Enable Register
+AT91C_MCI_TDR             EQU (0xFFFB4034) ;- (MCI) MCI Transmit Data Register
+AT91C_MCI_CMDR            EQU (0xFFFB4014) ;- (MCI) MCI Command Register
+AT91C_MCI_SDCR            EQU (0xFFFB400C) ;- (MCI) MCI SD Card Register
+AT91C_MCI_MR              EQU (0xFFFB4004) ;- (MCI) MCI Mode Register
+;- ========== Register definition for UDP peripheral ========== 
+AT91C_UDP_ISR             EQU (0xFFFB001C) ;- (UDP) Interrupt Status Register
+AT91C_UDP_IDR             EQU (0xFFFB0014) ;- (UDP) Interrupt Disable Register
+AT91C_UDP_GLBSTATE        EQU (0xFFFB0004) ;- (UDP) Global State Register
+AT91C_UDP_FDR             EQU (0xFFFB0050) ;- (UDP) Endpoint FIFO Data Register
+AT91C_UDP_CSR             EQU (0xFFFB0030) ;- (UDP) Endpoint Control and Status Register
+AT91C_UDP_RSTEP           EQU (0xFFFB0028) ;- (UDP) Reset Endpoint Register
+AT91C_UDP_ICR             EQU (0xFFFB0020) ;- (UDP) Interrupt Clear Register
+AT91C_UDP_IMR             EQU (0xFFFB0018) ;- (UDP) Interrupt Mask Register
+AT91C_UDP_IER             EQU (0xFFFB0010) ;- (UDP) Interrupt Enable Register
+AT91C_UDP_FADDR           EQU (0xFFFB0008) ;- (UDP) Function Address Register
+AT91C_UDP_NUM             EQU (0xFFFB0000) ;- (UDP) Frame Number Register
+;- ========== Register definition for TC5 peripheral ========== 
+AT91C_TC5_CMR             EQU (0xFFFA4084) ;- (TC5) Channel Mode Register
+AT91C_TC5_IDR             EQU (0xFFFA40A8) ;- (TC5) Interrupt Disable Register
+AT91C_TC5_SR              EQU (0xFFFA40A0) ;- (TC5) Status Register
+AT91C_TC5_RB              EQU (0xFFFA4098) ;- (TC5) Register B
+AT91C_TC5_CV              EQU (0xFFFA4090) ;- (TC5) Counter Value
+AT91C_TC5_CCR             EQU (0xFFFA4080) ;- (TC5) Channel Control Register
+AT91C_TC5_IMR             EQU (0xFFFA40AC) ;- (TC5) Interrupt Mask Register
+AT91C_TC5_IER             EQU (0xFFFA40A4) ;- (TC5) Interrupt Enable Register
+AT91C_TC5_RC              EQU (0xFFFA409C) ;- (TC5) Register C
+AT91C_TC5_RA              EQU (0xFFFA4094) ;- (TC5) Register A
+;- ========== Register definition for TC4 peripheral ========== 
+AT91C_TC4_IMR             EQU (0xFFFA406C) ;- (TC4) Interrupt Mask Register
+AT91C_TC4_IER             EQU (0xFFFA4064) ;- (TC4) Interrupt Enable Register
+AT91C_TC4_RC              EQU (0xFFFA405C) ;- (TC4) Register C
+AT91C_TC4_RA              EQU (0xFFFA4054) ;- (TC4) Register A
+AT91C_TC4_CMR             EQU (0xFFFA4044) ;- (TC4) Channel Mode Register
+AT91C_TC4_IDR             EQU (0xFFFA4068) ;- (TC4) Interrupt Disable Register
+AT91C_TC4_SR              EQU (0xFFFA4060) ;- (TC4) Status Register
+AT91C_TC4_RB              EQU (0xFFFA4058) ;- (TC4) Register B
+AT91C_TC4_CV              EQU (0xFFFA4050) ;- (TC4) Counter Value
+AT91C_TC4_CCR             EQU (0xFFFA4040) ;- (TC4) Channel Control Register
+;- ========== Register definition for TC3 peripheral ========== 
+AT91C_TC3_IMR             EQU (0xFFFA402C) ;- (TC3) Interrupt Mask Register
+AT91C_TC3_CV              EQU (0xFFFA4010) ;- (TC3) Counter Value
+AT91C_TC3_CCR             EQU (0xFFFA4000) ;- (TC3) Channel Control Register
+AT91C_TC3_IER             EQU (0xFFFA4024) ;- (TC3) Interrupt Enable Register
+AT91C_TC3_CMR             EQU (0xFFFA4004) ;- (TC3) Channel Mode Register
+AT91C_TC3_RA              EQU (0xFFFA4014) ;- (TC3) Register A
+AT91C_TC3_RC              EQU (0xFFFA401C) ;- (TC3) Register C
+AT91C_TC3_IDR             EQU (0xFFFA4028) ;- (TC3) Interrupt Disable Register
+AT91C_TC3_RB              EQU (0xFFFA4018) ;- (TC3) Register B
+AT91C_TC3_SR              EQU (0xFFFA4020) ;- (TC3) Status Register
+;- ========== Register definition for TCB1 peripheral ========== 
+AT91C_TCB1_BCR            EQU (0xFFFA4140) ;- (TCB1) TC Block Control Register
+AT91C_TCB1_BMR            EQU (0xFFFA4144) ;- (TCB1) TC Block Mode Register
+;- ========== Register definition for TC2 peripheral ========== 
+AT91C_TC2_IMR             EQU (0xFFFA00AC) ;- (TC2) Interrupt Mask Register
+AT91C_TC2_IER             EQU (0xFFFA00A4) ;- (TC2) Interrupt Enable Register
+AT91C_TC2_RC              EQU (0xFFFA009C) ;- (TC2) Register C
+AT91C_TC2_RA              EQU (0xFFFA0094) ;- (TC2) Register A
+AT91C_TC2_CMR             EQU (0xFFFA0084) ;- (TC2) Channel Mode Register
+AT91C_TC2_IDR             EQU (0xFFFA00A8) ;- (TC2) Interrupt Disable Register
+AT91C_TC2_SR              EQU (0xFFFA00A0) ;- (TC2) Status Register
+AT91C_TC2_RB              EQU (0xFFFA0098) ;- (TC2) Register B
+AT91C_TC2_CV              EQU (0xFFFA0090) ;- (TC2) Counter Value
+AT91C_TC2_CCR             EQU (0xFFFA0080) ;- (TC2) Channel Control Register
+;- ========== Register definition for TC1 peripheral ========== 
+AT91C_TC1_IMR             EQU (0xFFFA006C) ;- (TC1) Interrupt Mask Register
+AT91C_TC1_IER             EQU (0xFFFA0064) ;- (TC1) Interrupt Enable Register
+AT91C_TC1_RC              EQU (0xFFFA005C) ;- (TC1) Register C
+AT91C_TC1_RA              EQU (0xFFFA0054) ;- (TC1) Register A
+AT91C_TC1_CMR             EQU (0xFFFA0044) ;- (TC1) Channel Mode Register
+AT91C_TC1_IDR             EQU (0xFFFA0068) ;- (TC1) Interrupt Disable Register
+AT91C_TC1_SR              EQU (0xFFFA0060) ;- (TC1) Status Register
+AT91C_TC1_RB              EQU (0xFFFA0058) ;- (TC1) Register B
+AT91C_TC1_CV              EQU (0xFFFA0050) ;- (TC1) Counter Value
+AT91C_TC1_CCR             EQU (0xFFFA0040) ;- (TC1) Channel Control Register
+;- ========== Register definition for TC0 peripheral ========== 
+AT91C_TC0_IMR             EQU (0xFFFA002C) ;- (TC0) Interrupt Mask Register
+AT91C_TC0_IER             EQU (0xFFFA0024) ;- (TC0) Interrupt Enable Register
+AT91C_TC0_RC              EQU (0xFFFA001C) ;- (TC0) Register C
+AT91C_TC0_RA              EQU (0xFFFA0014) ;- (TC0) Register A
+AT91C_TC0_CMR             EQU (0xFFFA0004) ;- (TC0) Channel Mode Register
+AT91C_TC0_IDR             EQU (0xFFFA0028) ;- (TC0) Interrupt Disable Register
+AT91C_TC0_SR              EQU (0xFFFA0020) ;- (TC0) Status Register
+AT91C_TC0_RB              EQU (0xFFFA0018) ;- (TC0) Register B
+AT91C_TC0_CV              EQU (0xFFFA0010) ;- (TC0) Counter Value
+AT91C_TC0_CCR             EQU (0xFFFA0000) ;- (TC0) Channel Control Register
+;- ========== Register definition for TCB0 peripheral ========== 
+AT91C_TCB0_BMR            EQU (0xFFFA00C4) ;- (TCB0) TC Block Mode Register
+AT91C_TCB0_BCR            EQU (0xFFFA00C0) ;- (TCB0) TC Block Control Register
+;- ========== Register definition for UHP peripheral ========== 
+AT91C_UHP_HcRhDescriptorA EQU (0x00300048) ;- (UHP) Root Hub characteristics A
+AT91C_UHP_HcRhPortStatus  EQU (0x00300054) ;- (UHP) Root Hub Port Status Register
+AT91C_UHP_HcRhDescriptorB EQU (0x0030004C) ;- (UHP) Root Hub characteristics B
+AT91C_UHP_HcControl       EQU (0x00300004) ;- (UHP) Operating modes for the Host Controller
+AT91C_UHP_HcInterruptStatus EQU (0x0030000C) ;- (UHP) Interrupt Status Register
+AT91C_UHP_HcRhStatus      EQU (0x00300050) ;- (UHP) Root Hub Status register
+AT91C_UHP_HcRevision      EQU (0x00300000) ;- (UHP) Revision
+AT91C_UHP_HcCommandStatus EQU (0x00300008) ;- (UHP) Command & status Register
+AT91C_UHP_HcInterruptEnable EQU (0x00300010) ;- (UHP) Interrupt Enable Register
+AT91C_UHP_HcHCCA          EQU (0x00300018) ;- (UHP) Pointer to the Host Controller Communication Area
+AT91C_UHP_HcControlHeadED EQU (0x00300020) ;- (UHP) First Endpoint Descriptor of the Control list
+AT91C_UHP_HcInterruptDisable EQU (0x00300014) ;- (UHP) Interrupt Disable Register
+AT91C_UHP_HcPeriodCurrentED EQU (0x0030001C) ;- (UHP) Current Isochronous or Interrupt Endpoint Descriptor
+AT91C_UHP_HcControlCurrentED EQU (0x00300024) ;- (UHP) Endpoint Control and Status Register
+AT91C_UHP_HcBulkCurrentED EQU (0x0030002C) ;- (UHP) Current endpoint of the Bulk list
+AT91C_UHP_HcFmInterval    EQU (0x00300034) ;- (UHP) Bit time between 2 consecutive SOFs
+AT91C_UHP_HcBulkHeadED    EQU (0x00300028) ;- (UHP) First endpoint register of the Bulk list
+AT91C_UHP_HcBulkDoneHead  EQU (0x00300030) ;- (UHP) Last completed transfer descriptor
+AT91C_UHP_HcFmRemaining   EQU (0x00300038) ;- (UHP) Bit time remaining in the current Frame
+AT91C_UHP_HcPeriodicStart EQU (0x00300040) ;- (UHP) Periodic Start
+AT91C_UHP_HcLSThreshold   EQU (0x00300044) ;- (UHP) LS Threshold
+AT91C_UHP_HcFmNumber      EQU (0x0030003C) ;- (UHP) Frame number
+;- ========== Register definition for EMAC peripheral ========== 
+AT91C_EMAC_RSR            EQU (0xFFFBC020) ;- (EMAC) Receive Status Register
+AT91C_EMAC_MAN            EQU (0xFFFBC034) ;- (EMAC) PHY Maintenance Register
+AT91C_EMAC_HSH            EQU (0xFFFBC090) ;- (EMAC) Hash Address High[63:32]
+AT91C_EMAC_MCOL           EQU (0xFFFBC048) ;- (EMAC) Multiple Collision Frame Register
+AT91C_EMAC_IER            EQU (0xFFFBC028) ;- (EMAC) Interrupt Enable Register
+AT91C_EMAC_SA2H           EQU (0xFFFBC0A4) ;- (EMAC) Specific Address 2 High, Last 2 bytes
+AT91C_EMAC_HSL            EQU (0xFFFBC094) ;- (EMAC) Hash Address Low[31:0]
+AT91C_EMAC_LCOL           EQU (0xFFFBC05C) ;- (EMAC) Late Collision Register
+AT91C_EMAC_OK             EQU (0xFFFBC04C) ;- (EMAC) Frames Received OK Register
+AT91C_EMAC_CFG            EQU (0xFFFBC004) ;- (EMAC) Network Configuration Register
+AT91C_EMAC_SA3L           EQU (0xFFFBC0A8) ;- (EMAC) Specific Address 3 Low, First 4 bytes
+AT91C_EMAC_SEQE           EQU (0xFFFBC050) ;- (EMAC) Frame Check Sequence Error Register
+AT91C_EMAC_ECOL           EQU (0xFFFBC060) ;- (EMAC) Excessive Collision Register
+AT91C_EMAC_ELR            EQU (0xFFFBC070) ;- (EMAC) Excessive Length Error Register
+AT91C_EMAC_SR             EQU (0xFFFBC008) ;- (EMAC) Network Status Register
+AT91C_EMAC_RBQP           EQU (0xFFFBC018) ;- (EMAC) Receive Buffer Queue Pointer
+AT91C_EMAC_CSE            EQU (0xFFFBC064) ;- (EMAC) Carrier Sense Error Register
+AT91C_EMAC_RJB            EQU (0xFFFBC074) ;- (EMAC) Receive Jabber Register
+AT91C_EMAC_USF            EQU (0xFFFBC078) ;- (EMAC) Undersize Frame Register
+AT91C_EMAC_IDR            EQU (0xFFFBC02C) ;- (EMAC) Interrupt Disable Register
+AT91C_EMAC_SA1L           EQU (0xFFFBC098) ;- (EMAC) Specific Address 1 Low, First 4 bytes
+AT91C_EMAC_IMR            EQU (0xFFFBC030) ;- (EMAC) Interrupt Mask Register
+AT91C_EMAC_FRA            EQU (0xFFFBC040) ;- (EMAC) Frames Transmitted OK Register
+AT91C_EMAC_SA3H           EQU (0xFFFBC0AC) ;- (EMAC) Specific Address 3 High, Last 2 bytes
+AT91C_EMAC_SA1H           EQU (0xFFFBC09C) ;- (EMAC) Specific Address 1 High, Last 2 bytes
+AT91C_EMAC_SCOL           EQU (0xFFFBC044) ;- (EMAC) Single Collision Frame Register
+AT91C_EMAC_ALE            EQU (0xFFFBC054) ;- (EMAC) Alignment Error Register
+AT91C_EMAC_TAR            EQU (0xFFFBC00C) ;- (EMAC) Transmit Address Register
+AT91C_EMAC_SA4L           EQU (0xFFFBC0B0) ;- (EMAC) Specific Address 4 Low, First 4 bytes
+AT91C_EMAC_SA2L           EQU (0xFFFBC0A0) ;- (EMAC) Specific Address 2 Low, First 4 bytes
+AT91C_EMAC_TUE            EQU (0xFFFBC068) ;- (EMAC) Transmit Underrun Error Register
+AT91C_EMAC_DTE            EQU (0xFFFBC058) ;- (EMAC) Deferred Transmission Frame Register
+AT91C_EMAC_TCR            EQU (0xFFFBC010) ;- (EMAC) Transmit Control Register
+AT91C_EMAC_CTL            EQU (0xFFFBC000) ;- (EMAC) Network Control Register
+AT91C_EMAC_SA4H           EQU (0xFFFBC0B4) ;- (EMAC) Specific Address 4 High, Last 2 bytesr
+AT91C_EMAC_CDE            EQU (0xFFFBC06C) ;- (EMAC) Code Error Register
+AT91C_EMAC_SQEE           EQU (0xFFFBC07C) ;- (EMAC) SQE Test Error Register
+AT91C_EMAC_TSR            EQU (0xFFFBC014) ;- (EMAC) Transmit Status Register
+AT91C_EMAC_DRFC           EQU (0xFFFBC080) ;- (EMAC) Discarded RX Frame Register
+;- ========== Register definition for EBI peripheral ========== 
+AT91C_EBI_CFGR            EQU (0xFFFFFF64) ;- (EBI) Configuration Register
+AT91C_EBI_CSA             EQU (0xFFFFFF60) ;- (EBI) Chip Select Assignment Register
+;- ========== Register definition for SMC2 peripheral ========== 
+AT91C_SMC2_CSR            EQU (0xFFFFFF70) ;- (SMC2) SMC2 Chip Select Register
+;- ========== Register definition for SDRC peripheral ========== 
+AT91C_SDRC_IMR            EQU (0xFFFFFFAC) ;- (SDRC) SDRAM Controller Interrupt Mask Register
+AT91C_SDRC_IER            EQU (0xFFFFFFA4) ;- (SDRC) SDRAM Controller Interrupt Enable Register
+AT91C_SDRC_SRR            EQU (0xFFFFFF9C) ;- (SDRC) SDRAM Controller Self Refresh Register
+AT91C_SDRC_TR             EQU (0xFFFFFF94) ;- (SDRC) SDRAM Controller Refresh Timer Register
+AT91C_SDRC_ISR            EQU (0xFFFFFFB0) ;- (SDRC) SDRAM Controller Interrupt Mask Register
+AT91C_SDRC_IDR            EQU (0xFFFFFFA8) ;- (SDRC) SDRAM Controller Interrupt Disable Register
+AT91C_SDRC_LPR            EQU (0xFFFFFFA0) ;- (SDRC) SDRAM Controller Low Power Register
+AT91C_SDRC_CR             EQU (0xFFFFFF98) ;- (SDRC) SDRAM Controller Configuration Register
+AT91C_SDRC_MR             EQU (0xFFFFFF90) ;- (SDRC) SDRAM Controller Mode Register
+;- ========== Register definition for BFC peripheral ========== 
+AT91C_BFC_MR              EQU (0xFFFFFFC0) ;- (BFC) BFC Mode Register
+
+;- *****************************************************************************
+;-               PIO DEFINITIONS FOR AT91RM9200
+;- *****************************************************************************
+AT91C_PIO_PA0             EQU (1:SHL:0) ;- Pin Controlled by PA0
+AT91C_PA0_MISO            EQU (AT91C_PIO_PA0) ;-  SPI Master In Slave
+AT91C_PA0_PCK3            EQU (AT91C_PIO_PA0) ;-  PMC Programmable Clock Output 3
+AT91C_PIO_PA1             EQU (1:SHL:1) ;- Pin Controlled by PA1
+AT91C_PA1_MOSI            EQU (AT91C_PIO_PA1) ;-  SPI Master Out Slave
+AT91C_PA1_PCK0            EQU (AT91C_PIO_PA1) ;-  PMC Programmable Clock Output 0
+AT91C_PIO_PA10            EQU (1:SHL:10) ;- Pin Controlled by PA10
+AT91C_PA10_ETX1           EQU (AT91C_PIO_PA10) ;-  Ethernet MAC Transmit Data 1
+AT91C_PA10_MCDB1          EQU (AT91C_PIO_PA10) ;-  Multimedia Card B Data 1
+AT91C_PIO_PA11            EQU (1:SHL:11) ;- Pin Controlled by PA11
+AT91C_PA11_ECRS_ECRSDV    EQU (AT91C_PIO_PA11) ;-  Ethernet MAC Carrier Sense/Carrier Sense and Data Valid
+AT91C_PA11_MCDB2          EQU (AT91C_PIO_PA11) ;-  Multimedia Card B Data 2
+AT91C_PIO_PA12            EQU (1:SHL:12) ;- Pin Controlled by PA12
+AT91C_PA12_ERX0           EQU (AT91C_PIO_PA12) ;-  Ethernet MAC Receive Data 0
+AT91C_PA12_MCDB3          EQU (AT91C_PIO_PA12) ;-  Multimedia Card B Data 3
+AT91C_PIO_PA13            EQU (1:SHL:13) ;- Pin Controlled by PA13
+AT91C_PA13_ERX1           EQU (AT91C_PIO_PA13) ;-  Ethernet MAC Receive Data 1
+AT91C_PA13_TCLK0          EQU (AT91C_PIO_PA13) ;-  Timer Counter 0 external clock input
+AT91C_PIO_PA14            EQU (1:SHL:14) ;- Pin Controlled by PA14
+AT91C_PA14_ERXER          EQU (AT91C_PIO_PA14) ;-  Ethernet MAC Receive Error
+AT91C_PA14_TCLK1          EQU (AT91C_PIO_PA14) ;-  Timer Counter 1 external clock input
+AT91C_PIO_PA15            EQU (1:SHL:15) ;- Pin Controlled by PA15
+AT91C_PA15_EMDC           EQU (AT91C_PIO_PA15) ;-  Ethernet MAC Management Data Clock
+AT91C_PA15_TCLK2          EQU (AT91C_PIO_PA15) ;-  Timer Counter 2 external clock input
+AT91C_PIO_PA16            EQU (1:SHL:16) ;- Pin Controlled by PA16
+AT91C_PA16_EMDIO          EQU (AT91C_PIO_PA16) ;-  Ethernet MAC Management Data Input/Output
+AT91C_PA16_IRQ6           EQU (AT91C_PIO_PA16) ;-  AIC Interrupt input 6
+AT91C_PIO_PA17            EQU (1:SHL:17) ;- Pin Controlled by PA17
+AT91C_PA17_TXD0           EQU (AT91C_PIO_PA17) ;-  USART 0 Transmit Data
+AT91C_PA17_TIOA0          EQU (AT91C_PIO_PA17) ;-  Timer Counter 0 Multipurpose Timer I/O Pin A
+AT91C_PIO_PA18            EQU (1:SHL:18) ;- Pin Controlled by PA18
+AT91C_PA18_RXD0           EQU (AT91C_PIO_PA18) ;-  USART 0 Receive Data
+AT91C_PA18_TIOB0          EQU (AT91C_PIO_PA18) ;-  Timer Counter 0 Multipurpose Timer I/O Pin B
+AT91C_PIO_PA19            EQU (1:SHL:19) ;- Pin Controlled by PA19
+AT91C_PA19_SCK0           EQU (AT91C_PIO_PA19) ;-  USART 0 Serial Clock
+AT91C_PA19_TIOA1          EQU (AT91C_PIO_PA19) ;-  Timer Counter 1 Multipurpose Timer I/O Pin A
+AT91C_PIO_PA2             EQU (1:SHL:2) ;- Pin Controlled by PA2
+AT91C_PA2_SPCK            EQU (AT91C_PIO_PA2) ;-  SPI Serial Clock
+AT91C_PA2_IRQ4            EQU (AT91C_PIO_PA2) ;-  AIC Interrupt Input 4
+AT91C_PIO_PA20            EQU (1:SHL:20) ;- Pin Controlled by PA20
+AT91C_PA20_CTS0           EQU (AT91C_PIO_PA20) ;-  USART 0 Clear To Send
+AT91C_PA20_TIOB1          EQU (AT91C_PIO_PA20) ;-  Timer Counter 1 Multipurpose Timer I/O Pin B
+AT91C_PIO_PA21            EQU (1:SHL:21) ;- Pin Controlled by PA21
+AT91C_PA21_RTS0           EQU (AT91C_PIO_PA21) ;-  Usart 0 Ready To Send
+AT91C_PA21_TIOA2          EQU (AT91C_PIO_PA21) ;-  Timer Counter 2 Multipurpose Timer I/O Pin A
+AT91C_PIO_PA22            EQU (1:SHL:22) ;- Pin Controlled by PA22
+AT91C_PA22_RXD2           EQU (AT91C_PIO_PA22) ;-  USART 2 Receive Data
+AT91C_PA22_TIOB2          EQU (AT91C_PIO_PA22) ;-  Timer Counter 2 Multipurpose Timer I/O Pin B
+AT91C_PIO_PA23            EQU (1:SHL:23) ;- Pin Controlled by PA23
+AT91C_PA23_TXD2           EQU (AT91C_PIO_PA23) ;-  USART 2 Transmit Data
+AT91C_PA23_IRQ3           EQU (AT91C_PIO_PA23) ;-  Interrupt input 3
+AT91C_PIO_PA24            EQU (1:SHL:24) ;- Pin Controlled by PA24
+AT91C_PA24_SCK2           EQU (AT91C_PIO_PA24) ;-  USART2 Serial Clock
+AT91C_PA24_PCK1           EQU (AT91C_PIO_PA24) ;-  PMC Programmable Clock Output 1
+AT91C_PIO_PA25            EQU (1:SHL:25) ;- Pin Controlled by PA25
+AT91C_PA25_TWD            EQU (AT91C_PIO_PA25) ;-  TWI Two-wire Serial Data
+AT91C_PA25_IRQ2           EQU (AT91C_PIO_PA25) ;-  Interrupt input 2
+AT91C_PIO_PA26            EQU (1:SHL:26) ;- Pin Controlled by PA26
+AT91C_PA26_TWCK           EQU (AT91C_PIO_PA26) ;-  TWI Two-wire Serial Clock
+AT91C_PA26_IRQ1           EQU (AT91C_PIO_PA26) ;-  Interrupt input 1
+AT91C_PIO_PA27            EQU (1:SHL:27) ;- Pin Controlled by PA27
+AT91C_PA27_MCCK           EQU (AT91C_PIO_PA27) ;-  Multimedia Card Clock
+AT91C_PA27_TCLK3          EQU (AT91C_PIO_PA27) ;-  Timer Counter 3 External Clock Input
+AT91C_PIO_PA28            EQU (1:SHL:28) ;- Pin Controlled by PA28
+AT91C_PA28_MCCDA          EQU (AT91C_PIO_PA28) ;-  Multimedia Card A Command
+AT91C_PA28_TCLK4          EQU (AT91C_PIO_PA28) ;-  Timer Counter 4 external Clock Input
+AT91C_PIO_PA29            EQU (1:SHL:29) ;- Pin Controlled by PA29
+AT91C_PA29_MCDA0          EQU (AT91C_PIO_PA29) ;-  Multimedia Card A Data 0
+AT91C_PA29_TCLK5          EQU (AT91C_PIO_PA29) ;-  Timer Counter 5 external clock input
+AT91C_PIO_PA3             EQU (1:SHL:3) ;- Pin Controlled by PA3
+AT91C_PA3_NPCS0           EQU (AT91C_PIO_PA3) ;-  SPI Peripheral Chip Select 0
+AT91C_PA3_IRQ5            EQU (AT91C_PIO_PA3) ;-  AIC Interrupt Input 5
+AT91C_PIO_PA30            EQU (1:SHL:30) ;- Pin Controlled by PA30
+AT91C_PA30_DRXD           EQU (AT91C_PIO_PA30) ;-  DBGU Debug Receive Data
+AT91C_PA30_CTS2           EQU (AT91C_PIO_PA30) ;-  Usart 2 Clear To Send
+AT91C_PIO_PA31            EQU (1:SHL:31) ;- Pin Controlled by PA31
+AT91C_PA31_DTXD           EQU (AT91C_PIO_PA31) ;-  DBGU Debug Transmit Data
+AT91C_PA31_RTS2           EQU (AT91C_PIO_PA31) ;-  USART 2 Ready To Send
+AT91C_PIO_PA4             EQU (1:SHL:4) ;- Pin Controlled by PA4
+AT91C_PA4_NPCS1           EQU (AT91C_PIO_PA4) ;-  SPI Peripheral Chip Select 1
+AT91C_PA4_PCK1            EQU (AT91C_PIO_PA4) ;-  PMC Programmable Clock Output 1
+AT91C_PIO_PA5             EQU (1:SHL:5) ;- Pin Controlled by PA5
+AT91C_PA5_NPCS2           EQU (AT91C_PIO_PA5) ;-  SPI Peripheral Chip Select 2
+AT91C_PA5_TXD3            EQU (AT91C_PIO_PA5) ;-  USART 3 Transmit Data
+AT91C_PIO_PA6             EQU (1:SHL:6) ;- Pin Controlled by PA6
+AT91C_PA6_NPCS3           EQU (AT91C_PIO_PA6) ;-  SPI Peripheral Chip Select 3
+AT91C_PA6_RXD3            EQU (AT91C_PIO_PA6) ;-  USART 3 Receive Data
+AT91C_PIO_PA7             EQU (1:SHL:7) ;- Pin Controlled by PA7
+AT91C_PA7_ETXCK_EREFCK    EQU (AT91C_PIO_PA7) ;-  Ethernet MAC Transmit Clock/Reference Clock
+AT91C_PA7_PCK2            EQU (AT91C_PIO_PA7) ;-  PMC Programmable Clock 2
+AT91C_PIO_PA8             EQU (1:SHL:8) ;- Pin Controlled by PA8
+AT91C_PA8_ETXEN           EQU (AT91C_PIO_PA8) ;-  Ethernet MAC Transmit Enable
+AT91C_PA8_MCCDB           EQU (AT91C_PIO_PA8) ;-  Multimedia Card B Command
+AT91C_PIO_PA9             EQU (1:SHL:9) ;- Pin Controlled by PA9
+AT91C_PA9_ETX0            EQU (AT91C_PIO_PA9) ;-  Ethernet MAC Transmit Data 0
+AT91C_PA9_MCDB0           EQU (AT91C_PIO_PA9) ;-  Multimedia Card B Data 0
+AT91C_PIO_PB0             EQU (1:SHL:0) ;- Pin Controlled by PB0
+AT91C_PB0_TF0             EQU (AT91C_PIO_PB0) ;-  SSC Transmit Frame Sync 0
+AT91C_PB0_TIOB3           EQU (AT91C_PIO_PB0) ;-  Timer Counter 3 Multipurpose Timer I/O Pin B
+AT91C_PIO_PB1             EQU (1:SHL:1) ;- Pin Controlled by PB1
+AT91C_PB1_TK0             EQU (AT91C_PIO_PB1) ;-  SSC Transmit Clock 0
+AT91C_PB1_CTS3            EQU (AT91C_PIO_PB1) ;-  USART 3 Clear To Send
+AT91C_PIO_PB10            EQU (1:SHL:10) ;- Pin Controlled by PB10
+AT91C_PB10_RK1            EQU (AT91C_PIO_PB10) ;-  SSC Receive Clock 1
+AT91C_PB10_TIOA5          EQU (AT91C_PIO_PB10) ;-  Timer Counter 5 Multipurpose Timer I/O Pin A
+AT91C_PIO_PB11            EQU (1:SHL:11) ;- Pin Controlled by PB11
+AT91C_PB11_RF1            EQU (AT91C_PIO_PB11) ;-  SSC Receive Frame Sync 1
+AT91C_PB11_TIOB5          EQU (AT91C_PIO_PB11) ;-  Timer Counter 5 Multipurpose Timer I/O Pin B
+AT91C_PIO_PB12            EQU (1:SHL:12) ;- Pin Controlled by PB12
+AT91C_PB12_TF2            EQU (AT91C_PIO_PB12) ;-  SSC Transmit Frame Sync 2
+AT91C_PB12_ETX2           EQU (AT91C_PIO_PB12) ;-  Ethernet MAC Transmit Data 2
+AT91C_PIO_PB13            EQU (1:SHL:13) ;- Pin Controlled by PB13
+AT91C_PB13_TK2            EQU (AT91C_PIO_PB13) ;-  SSC Transmit Clock 2
+AT91C_PB13_ETX3           EQU (AT91C_PIO_PB13) ;-  Ethernet MAC Transmit Data 3
+AT91C_PIO_PB14            EQU (1:SHL:14) ;- Pin Controlled by PB14
+AT91C_PB14_TD2            EQU (AT91C_PIO_PB14) ;-  SSC Transmit Data 2
+AT91C_PB14_ETXER          EQU (AT91C_PIO_PB14) ;-  Ethernet MAC Transmikt Coding Error
+AT91C_PIO_PB15            EQU (1:SHL:15) ;- Pin Controlled by PB15
+AT91C_PB15_RD2            EQU (AT91C_PIO_PB15) ;-  SSC Receive Data 2
+AT91C_PB15_ERX2           EQU (AT91C_PIO_PB15) ;-  Ethernet MAC Receive Data 2
+AT91C_PIO_PB16            EQU (1:SHL:16) ;- Pin Controlled by PB16
+AT91C_PB16_RK2            EQU (AT91C_PIO_PB16) ;-  SSC Receive Clock 2
+AT91C_PB16_ERX3           EQU (AT91C_PIO_PB16) ;-  Ethernet MAC Receive Data 3
+AT91C_PIO_PB17            EQU (1:SHL:17) ;- Pin Controlled by PB17
+AT91C_PB17_RF2            EQU (AT91C_PIO_PB17) ;-  SSC Receive Frame Sync 2
+AT91C_PB17_ERXDV          EQU (AT91C_PIO_PB17) ;-  Ethernet MAC Receive Data Valid
+AT91C_PIO_PB18            EQU (1:SHL:18) ;- Pin Controlled by PB18
+AT91C_PB18_RI1            EQU (AT91C_PIO_PB18) ;-  USART 1 Ring Indicator
+AT91C_PB18_ECOL           EQU (AT91C_PIO_PB18) ;-  Ethernet MAC Collision Detected
+AT91C_PIO_PB19            EQU (1:SHL:19) ;- Pin Controlled by PB19
+AT91C_PB19_DTR1           EQU (AT91C_PIO_PB19) ;-  USART 1 Data Terminal ready
+AT91C_PB19_ERXCK          EQU (AT91C_PIO_PB19) ;-  Ethernet MAC Receive Clock
+AT91C_PIO_PB2             EQU (1:SHL:2) ;- Pin Controlled by PB2
+AT91C_PB2_TD0             EQU (AT91C_PIO_PB2) ;-  SSC Transmit data
+AT91C_PB2_SCK3            EQU (AT91C_PIO_PB2) ;-  USART 3 Serial Clock
+AT91C_PIO_PB20            EQU (1:SHL:20) ;- Pin Controlled by PB20
+AT91C_PB20_TXD1           EQU (AT91C_PIO_PB20) ;-  USART 1 Transmit Data
+AT91C_PIO_PB21            EQU (1:SHL:21) ;- Pin Controlled by PB21
+AT91C_PB21_RXD1           EQU (AT91C_PIO_PB21) ;-  USART 1 Receive Data
+AT91C_PIO_PB22            EQU (1:SHL:22) ;- Pin Controlled by PB22
+AT91C_PB22_SCK1           EQU (AT91C_PIO_PB22) ;-  USART1 Serial Clock
+AT91C_PIO_PB23            EQU (1:SHL:23) ;- Pin Controlled by PB23
+AT91C_PB23_DCD1           EQU (AT91C_PIO_PB23) ;-  USART 1 Data Carrier Detect
+AT91C_PIO_PB24            EQU (1:SHL:24) ;- Pin Controlled by PB24
+AT91C_PB24_CTS1           EQU (AT91C_PIO_PB24) ;-  USART 1 Clear To Send
+AT91C_PIO_PB25            EQU (1:SHL:25) ;- Pin Controlled by PB25
+AT91C_PB25_DSR1           EQU (AT91C_PIO_PB25) ;-  USART 1 Data Set ready
+AT91C_PB25_EF100          EQU (AT91C_PIO_PB25) ;-  Ethernet MAC Force 100 Mbits/sec
+AT91C_PIO_PB26            EQU (1:SHL:26) ;- Pin Controlled by PB26
+AT91C_PB26_RTS1           EQU (AT91C_PIO_PB26) ;-  Usart 0 Ready To Send
+AT91C_PIO_PB27            EQU (1:SHL:27) ;- Pin Controlled by PB27
+AT91C_PB27_PCK0           EQU (AT91C_PIO_PB27) ;-  PMC Programmable Clock Output 0
+AT91C_PIO_PB28            EQU (1:SHL:28) ;- Pin Controlled by PB28
+AT91C_PB28_FIQ            EQU (AT91C_PIO_PB28) ;-  AIC Fast Interrupt Input
+AT91C_PIO_PB29            EQU (1:SHL:29) ;- Pin Controlled by PB29
+AT91C_PB29_IRQ0           EQU (AT91C_PIO_PB29) ;-  Interrupt input 0
+AT91C_PIO_PB3             EQU (1:SHL:3) ;- Pin Controlled by PB3
+AT91C_PB3_RD0             EQU (AT91C_PIO_PB3) ;-  SSC Receive Data
+AT91C_PB3_MCDA1           EQU (AT91C_PIO_PB3) ;-  Multimedia Card A Data 1
+AT91C_PIO_PB4             EQU (1:SHL:4) ;- Pin Controlled by PB4
+AT91C_PB4_RK0             EQU (AT91C_PIO_PB4) ;-  SSC Receive Clock
+AT91C_PB4_MCDA2           EQU (AT91C_PIO_PB4) ;-  Multimedia Card A Data 2
+AT91C_PIO_PB5             EQU (1:SHL:5) ;- Pin Controlled by PB5
+AT91C_PB5_RF0             EQU (AT91C_PIO_PB5) ;-  SSC Receive Frame Sync 0
+AT91C_PB5_MCDA3           EQU (AT91C_PIO_PB5) ;-  Multimedia Card A Data 3
+AT91C_PIO_PB6             EQU (1:SHL:6) ;- Pin Controlled by PB6
+AT91C_PB6_TF1             EQU (AT91C_PIO_PB6) ;-  SSC Transmit Frame Sync 1
+AT91C_PB6_TIOA3           EQU (AT91C_PIO_PB6) ;-  Timer Counter 4 Multipurpose Timer I/O Pin A
+AT91C_PIO_PB7             EQU (1:SHL:7) ;- Pin Controlled by PB7
+AT91C_PB7_TK1             EQU (AT91C_PIO_PB7) ;-  SSC Transmit Clock 1
+AT91C_PB7_TIOB3           EQU (AT91C_PIO_PB7) ;-  Timer Counter 3 Multipurpose Timer I/O Pin B
+AT91C_PIO_PB8             EQU (1:SHL:8) ;- Pin Controlled by PB8
+AT91C_PB8_TD1             EQU (AT91C_PIO_PB8) ;-  SSC Transmit Data 1
+AT91C_PB8_TIOA4           EQU (AT91C_PIO_PB8) ;-  Timer Counter 4 Multipurpose Timer I/O Pin A
+AT91C_PIO_PB9             EQU (1:SHL:9) ;- Pin Controlled by PB9
+AT91C_PB9_RD1             EQU (AT91C_PIO_PB9) ;-  SSC Receive Data 1
+AT91C_PB9_TIOB4           EQU (AT91C_PIO_PB9) ;-  Timer Counter 4 Multipurpose Timer I/O Pin B
+AT91C_PIO_PC0             EQU (1:SHL:0) ;- Pin Controlled by PC0
+AT91C_PC0_BFCK            EQU (AT91C_PIO_PC0) ;-  Burst Flash Clock
+AT91C_PIO_PC1             EQU (1:SHL:1) ;- Pin Controlled by PC1
+AT91C_PC1_BFRDY_SMOE      EQU (AT91C_PIO_PC1) ;-  Burst Flash Ready
+AT91C_PIO_PC10            EQU (1:SHL:10) ;- Pin Controlled by PC10
+AT91C_PC10_NCS4_CFCS      EQU (AT91C_PIO_PC10) ;-  Compact Flash Chip Select
+AT91C_PIO_PC11            EQU (1:SHL:11) ;- Pin Controlled by PC11
+AT91C_PC11_NCS5_CFCE1     EQU (AT91C_PIO_PC11) ;-  Chip Select 5 / Compact Flash Chip Enable 1
+AT91C_PIO_PC12            EQU (1:SHL:12) ;- Pin Controlled by PC12
+AT91C_PC12_NCS6_CFCE2     EQU (AT91C_PIO_PC12) ;-  Chip Select 6 / Compact Flash Chip Enable 2
+AT91C_PIO_PC13            EQU (1:SHL:13) ;- Pin Controlled by PC13
+AT91C_PC13_NCS7           EQU (AT91C_PIO_PC13) ;-  Chip Select 7
+AT91C_PIO_PC14            EQU (1:SHL:14) ;- Pin Controlled by PC14
+AT91C_PIO_PC15            EQU (1:SHL:15) ;- Pin Controlled by PC15
+AT91C_PIO_PC16            EQU (1:SHL:16) ;- Pin Controlled by PC16
+AT91C_PC16_D16            EQU (AT91C_PIO_PC16) ;-  Data Bus [16]
+AT91C_PIO_PC17            EQU (1:SHL:17) ;- Pin Controlled by PC17
+AT91C_PC17_D17            EQU (AT91C_PIO_PC17) ;-  Data Bus [17]
+AT91C_PIO_PC18            EQU (1:SHL:18) ;- Pin Controlled by PC18
+AT91C_PC18_D18            EQU (AT91C_PIO_PC18) ;-  Data Bus [18]
+AT91C_PIO_PC19            EQU (1:SHL:19) ;- Pin Controlled by PC19
+AT91C_PC19_D19            EQU (AT91C_PIO_PC19) ;-  Data Bus [19]
+AT91C_PIO_PC2             EQU (1:SHL:2) ;- Pin Controlled by PC2
+AT91C_PC2_BFAVD           EQU (AT91C_PIO_PC2) ;-  Burst Flash Address Valid
+AT91C_PIO_PC20            EQU (1:SHL:20) ;- Pin Controlled by PC20
+AT91C_PC20_D20            EQU (AT91C_PIO_PC20) ;-  Data Bus [20]
+AT91C_PIO_PC21            EQU (1:SHL:21) ;- Pin Controlled by PC21
+AT91C_PC21_D21            EQU (AT91C_PIO_PC21) ;-  Data Bus [21]
+AT91C_PIO_PC22            EQU (1:SHL:22) ;- Pin Controlled by PC22
+AT91C_PC22_D22            EQU (AT91C_PIO_PC22) ;-  Data Bus [22]
+AT91C_PIO_PC23            EQU (1:SHL:23) ;- Pin Controlled by PC23
+AT91C_PC23_D23            EQU (AT91C_PIO_PC23) ;-  Data Bus [23]
+AT91C_PIO_PC24            EQU (1:SHL:24) ;- Pin Controlled by PC24
+AT91C_PC24_D24            EQU (AT91C_PIO_PC24) ;-  Data Bus [24]
+AT91C_PIO_PC25            EQU (1:SHL:25) ;- Pin Controlled by PC25
+AT91C_PC25_D25            EQU (AT91C_PIO_PC25) ;-  Data Bus [25]
+AT91C_PIO_PC26            EQU (1:SHL:26) ;- Pin Controlled by PC26
+AT91C_PC26_D26            EQU (AT91C_PIO_PC26) ;-  Data Bus [26]
+AT91C_PIO_PC27            EQU (1:SHL:27) ;- Pin Controlled by PC27
+AT91C_PC27_D27            EQU (AT91C_PIO_PC27) ;-  Data Bus [27]
+AT91C_PIO_PC28            EQU (1:SHL:28) ;- Pin Controlled by PC28
+AT91C_PC28_D28            EQU (AT91C_PIO_PC28) ;-  Data Bus [28]
+AT91C_PIO_PC29            EQU (1:SHL:29) ;- Pin Controlled by PC29
+AT91C_PC29_D29            EQU (AT91C_PIO_PC29) ;-  Data Bus [29]
+AT91C_PIO_PC3             EQU (1:SHL:3) ;- Pin Controlled by PC3
+AT91C_PC3_BFBAA_SMWE      EQU (AT91C_PIO_PC3) ;-  Burst Flash Address Advance / SmartMedia Write Enable
+AT91C_PIO_PC30            EQU (1:SHL:30) ;- Pin Controlled by PC30
+AT91C_PC30_D30            EQU (AT91C_PIO_PC30) ;-  Data Bus [30]
+AT91C_PIO_PC31            EQU (1:SHL:31) ;- Pin Controlled by PC31
+AT91C_PC31_D31            EQU (AT91C_PIO_PC31) ;-  Data Bus [31]
+AT91C_PIO_PC4             EQU (1:SHL:4) ;- Pin Controlled by PC4
+AT91C_PC4_BFOE            EQU (AT91C_PIO_PC4) ;-  Burst Flash Output Enable
+AT91C_PIO_PC5             EQU (1:SHL:5) ;- Pin Controlled by PC5
+AT91C_PC5_BFWE            EQU (AT91C_PIO_PC5) ;-  Burst Flash Write Enable
+AT91C_PIO_PC6             EQU (1:SHL:6) ;- Pin Controlled by PC6
+AT91C_PC6_NWAIT           EQU (AT91C_PIO_PC6) ;-  NWAIT
+AT91C_PIO_PC7             EQU (1:SHL:7) ;- Pin Controlled by PC7
+AT91C_PC7_A23             EQU (AT91C_PIO_PC7) ;-  Address Bus[23]
+AT91C_PIO_PC8             EQU (1:SHL:8) ;- Pin Controlled by PC8
+AT91C_PC8_A24             EQU (AT91C_PIO_PC8) ;-  Address Bus[24]
+AT91C_PIO_PC9             EQU (1:SHL:9) ;- Pin Controlled by PC9
+AT91C_PC9_A25_CFRNW       EQU (AT91C_PIO_PC9) ;-  Address Bus[25] /  Compact Flash Read Not Write
+AT91C_PIO_PD0             EQU (1:SHL:0) ;- Pin Controlled by PD0
+AT91C_PD0_ETX0            EQU (AT91C_PIO_PD0) ;-  Ethernet MAC Transmit Data 0
+AT91C_PIO_PD1             EQU (1:SHL:1) ;- Pin Controlled by PD1
+AT91C_PD1_ETX1            EQU (AT91C_PIO_PD1) ;-  Ethernet MAC Transmit Data 1
+AT91C_PIO_PD10            EQU (1:SHL:10) ;- Pin Controlled by PD10
+AT91C_PD10_PCK3           EQU (AT91C_PIO_PD10) ;-  PMC Programmable Clock Output 3
+AT91C_PD10_TPS1           EQU (AT91C_PIO_PD10) ;-  ETM ARM9 pipeline status 1
+AT91C_PIO_PD11            EQU (1:SHL:11) ;- Pin Controlled by PD11
+AT91C_PD11_               EQU (AT91C_PIO_PD11) ;-  
+AT91C_PD11_TPS2           EQU (AT91C_PIO_PD11) ;-  ETM ARM9 pipeline status 2
+AT91C_PIO_PD12            EQU (1:SHL:12) ;- Pin Controlled by PD12
+AT91C_PD12_               EQU (AT91C_PIO_PD12) ;-  
+AT91C_PD12_TPK0           EQU (AT91C_PIO_PD12) ;-  ETM Trace Packet 0
+AT91C_PIO_PD13            EQU (1:SHL:13) ;- Pin Controlled by PD13
+AT91C_PD13_               EQU (AT91C_PIO_PD13) ;-  
+AT91C_PD13_TPK1           EQU (AT91C_PIO_PD13) ;-  ETM Trace Packet 1
+AT91C_PIO_PD14            EQU (1:SHL:14) ;- Pin Controlled by PD14
+AT91C_PD14_               EQU (AT91C_PIO_PD14) ;-  
+AT91C_PD14_TPK2           EQU (AT91C_PIO_PD14) ;-  ETM Trace Packet 2
+AT91C_PIO_PD15            EQU (1:SHL:15) ;- Pin Controlled by PD15
+AT91C_PD15_TD0            EQU (AT91C_PIO_PD15) ;-  SSC Transmit data
+AT91C_PD15_TPK3           EQU (AT91C_PIO_PD15) ;-  ETM Trace Packet 3
+AT91C_PIO_PD16            EQU (1:SHL:16) ;- Pin Controlled by PD16
+AT91C_PD16_TD1            EQU (AT91C_PIO_PD16) ;-  SSC Transmit Data 1
+AT91C_PD16_TPK4           EQU (AT91C_PIO_PD16) ;-  ETM Trace Packet 4
+AT91C_PIO_PD17            EQU (1:SHL:17) ;- Pin Controlled by PD17
+AT91C_PD17_TD2            EQU (AT91C_PIO_PD17) ;-  SSC Transmit Data 2
+AT91C_PD17_TPK5           EQU (AT91C_PIO_PD17) ;-  ETM Trace Packet 5
+AT91C_PIO_PD18            EQU (1:SHL:18) ;- Pin Controlled by PD18
+AT91C_PD18_NPCS1          EQU (AT91C_PIO_PD18) ;-  SPI Peripheral Chip Select 1
+AT91C_PD18_TPK6           EQU (AT91C_PIO_PD18) ;-  ETM Trace Packet 6
+AT91C_PIO_PD19            EQU (1:SHL:19) ;- Pin Controlled by PD19
+AT91C_PD19_NPCS2          EQU (AT91C_PIO_PD19) ;-  SPI Peripheral Chip Select 2
+AT91C_PD19_TPK7           EQU (AT91C_PIO_PD19) ;-  ETM Trace Packet 7
+AT91C_PIO_PD2             EQU (1:SHL:2) ;- Pin Controlled by PD2
+AT91C_PD2_ETX2            EQU (AT91C_PIO_PD2) ;-  Ethernet MAC Transmit Data 2
+AT91C_PIO_PD20            EQU (1:SHL:20) ;- Pin Controlled by PD20
+AT91C_PD20_NPCS3          EQU (AT91C_PIO_PD20) ;-  SPI Peripheral Chip Select 3
+AT91C_PD20_TPK8           EQU (AT91C_PIO_PD20) ;-  ETM Trace Packet 8
+AT91C_PIO_PD21            EQU (1:SHL:21) ;- Pin Controlled by PD21
+AT91C_PD21_RTS0           EQU (AT91C_PIO_PD21) ;-  Usart 0 Ready To Send
+AT91C_PD21_TPK9           EQU (AT91C_PIO_PD21) ;-  ETM Trace Packet 9
+AT91C_PIO_PD22            EQU (1:SHL:22) ;- Pin Controlled by PD22
+AT91C_PD22_RTS1           EQU (AT91C_PIO_PD22) ;-  Usart 0 Ready To Send
+AT91C_PD22_TPK10          EQU (AT91C_PIO_PD22) ;-  ETM Trace Packet 10
+AT91C_PIO_PD23            EQU (1:SHL:23) ;- Pin Controlled by PD23
+AT91C_PD23_RTS2           EQU (AT91C_PIO_PD23) ;-  USART 2 Ready To Send
+AT91C_PD23_TPK11          EQU (AT91C_PIO_PD23) ;-  ETM Trace Packet 11
+AT91C_PIO_PD24            EQU (1:SHL:24) ;- Pin Controlled by PD24
+AT91C_PD24_RTS3           EQU (AT91C_PIO_PD24) ;-  USART 3 Ready To Send
+AT91C_PD24_TPK12          EQU (AT91C_PIO_PD24) ;-  ETM Trace Packet 12
+AT91C_PIO_PD25            EQU (1:SHL:25) ;- Pin Controlled by PD25
+AT91C_PD25_DTR1           EQU (AT91C_PIO_PD25) ;-  USART 1 Data Terminal ready
+AT91C_PD25_TPK13          EQU (AT91C_PIO_PD25) ;-  ETM Trace Packet 13
+AT91C_PIO_PD26            EQU (1:SHL:26) ;- Pin Controlled by PD26
+AT91C_PD26_TPK14          EQU (AT91C_PIO_PD26) ;-  ETM Trace Packet 14
+AT91C_PIO_PD27            EQU (1:SHL:27) ;- Pin Controlled by PD27
+AT91C_PD27_TPK15          EQU (AT91C_PIO_PD27) ;-  ETM Trace Packet 15
+AT91C_PIO_PD3             EQU (1:SHL:3) ;- Pin Controlled by PD3
+AT91C_PD3_ETX3            EQU (AT91C_PIO_PD3) ;-  Ethernet MAC Transmit Data 3
+AT91C_PIO_PD4             EQU (1:SHL:4) ;- Pin Controlled by PD4
+AT91C_PD4_ETXEN           EQU (AT91C_PIO_PD4) ;-  Ethernet MAC Transmit Enable
+AT91C_PIO_PD5             EQU (1:SHL:5) ;- Pin Controlled by PD5
+AT91C_PD5_ETXER           EQU (AT91C_PIO_PD5) ;-  Ethernet MAC Transmikt Coding Error
+AT91C_PIO_PD6             EQU (1:SHL:6) ;- Pin Controlled by PD6
+AT91C_PD6_DTXD            EQU (AT91C_PIO_PD6) ;-  DBGU Debug Transmit Data
+AT91C_PIO_PD7             EQU (1:SHL:7) ;- Pin Controlled by PD7
+AT91C_PD7_PCK0            EQU (AT91C_PIO_PD7) ;-  PMC Programmable Clock Output 0
+AT91C_PD7_TSYNC           EQU (AT91C_PIO_PD7) ;-  ETM Synchronization signal
+AT91C_PIO_PD8             EQU (1:SHL:8) ;- Pin Controlled by PD8
+AT91C_PD8_PCK1            EQU (AT91C_PIO_PD8) ;-  PMC Programmable Clock Output 1
+AT91C_PD8_TCLK            EQU (AT91C_PIO_PD8) ;-  ETM Trace Clock signal
+AT91C_PIO_PD9             EQU (1:SHL:9) ;- Pin Controlled by PD9
+AT91C_PD9_PCK2            EQU (AT91C_PIO_PD9) ;-  PMC Programmable Clock 2
+AT91C_PD9_TPS0            EQU (AT91C_PIO_PD9) ;-  ETM ARM9 pipeline status 0
+
+;- *****************************************************************************
+;-               PERIPHERAL ID DEFINITIONS FOR AT91RM9200
+;- *****************************************************************************
+AT91C_ID_FIQ              EQU ( 0) ;- Advanced Interrupt Controller (FIQ)
+AT91C_ID_SYS              EQU ( 1) ;- System Peripheral
+AT91C_ID_PIOA             EQU ( 2) ;- Parallel IO Controller A 
+AT91C_ID_PIOB             EQU ( 3) ;- Parallel IO Controller B
+AT91C_ID_PIOC             EQU ( 4) ;- Parallel IO Controller C
+AT91C_ID_PIOD             EQU ( 5) ;- Parallel IO Controller D
+AT91C_ID_US0              EQU ( 6) ;- USART 0
+AT91C_ID_US1              EQU ( 7) ;- USART 1
+AT91C_ID_US2              EQU ( 8) ;- USART 2
+AT91C_ID_US3              EQU ( 9) ;- USART 3
+AT91C_ID_MCI              EQU (10) ;- Multimedia Card Interface
+AT91C_ID_UDP              EQU (11) ;- USB Device Port
+AT91C_ID_TWI              EQU (12) ;- Two-Wire Interface
+AT91C_ID_SPI              EQU (13) ;- Serial Peripheral Interface
+AT91C_ID_SSC0             EQU (14) ;- Serial Synchronous Controller 0
+AT91C_ID_SSC1             EQU (15) ;- Serial Synchronous Controller 1
+AT91C_ID_SSC2             EQU (16) ;- Serial Synchronous Controller 2
+AT91C_ID_TC0              EQU (17) ;- Timer Counter 0
+AT91C_ID_TC1              EQU (18) ;- Timer Counter 1
+AT91C_ID_TC2              EQU (19) ;- Timer Counter 2
+AT91C_ID_TC3              EQU (20) ;- Timer Counter 3
+AT91C_ID_TC4              EQU (21) ;- Timer Counter 4
+AT91C_ID_TC5              EQU (22) ;- Timer Counter 5
+AT91C_ID_UHP              EQU (23) ;- USB Host port
+AT91C_ID_EMAC             EQU (24) ;- Ethernet MAC
+AT91C_ID_IRQ0             EQU (25) ;- Advanced Interrupt Controller (IRQ0)
+AT91C_ID_IRQ1             EQU (26) ;- Advanced Interrupt Controller (IRQ1)
+AT91C_ID_IRQ2             EQU (27) ;- Advanced Interrupt Controller (IRQ2)
+AT91C_ID_IRQ3             EQU (28) ;- Advanced Interrupt Controller (IRQ3)
+AT91C_ID_IRQ4             EQU (29) ;- Advanced Interrupt Controller (IRQ4)
+AT91C_ID_IRQ5             EQU (30) ;- Advanced Interrupt Controller (IRQ5)
+AT91C_ID_IRQ6             EQU (31) ;- Advanced Interrupt Controller (IRQ6)
+
+;- *****************************************************************************
+;-               BASE ADDRESS DEFINITIONS FOR AT91RM9200
+;- *****************************************************************************
+AT91C_BASE_SYS            EQU (0xFFFFF000) ;- (SYS) Base Address
+AT91C_BASE_MC             EQU (0xFFFFFF00) ;- (MC) Base Address
+AT91C_BASE_RTC            EQU (0xFFFFFE00) ;- (RTC) Base Address
+AT91C_BASE_ST             EQU (0xFFFFFD00) ;- (ST) Base Address
+AT91C_BASE_PMC            EQU (0xFFFFFC00) ;- (PMC) Base Address
+AT91C_BASE_CKGR           EQU (0xFFFFFC20) ;- (CKGR) Base Address
+AT91C_BASE_PIOD           EQU (0xFFFFFA00) ;- (PIOD) Base Address
+AT91C_BASE_PIOC           EQU (0xFFFFF800) ;- (PIOC) Base Address
+AT91C_BASE_PIOB           EQU (0xFFFFF600) ;- (PIOB) Base Address
+AT91C_BASE_PIOA           EQU (0xFFFFF400) ;- (PIOA) Base Address
+AT91C_BASE_DBGU           EQU (0xFFFFF200) ;- (DBGU) Base Address
+AT91C_BASE_PDC_DBGU       EQU (0xFFFFF300) ;- (PDC_DBGU) Base Address
+AT91C_BASE_AIC            EQU (0xFFFFF000) ;- (AIC) Base Address
+AT91C_BASE_PDC_SPI        EQU (0xFFFE0100) ;- (PDC_SPI) Base Address
+AT91C_BASE_SPI            EQU (0xFFFE0000) ;- (SPI) Base Address
+AT91C_BASE_PDC_SSC2       EQU (0xFFFD8100) ;- (PDC_SSC2) Base Address
+AT91C_BASE_SSC2           EQU (0xFFFD8000) ;- (SSC2) Base Address
+AT91C_BASE_PDC_SSC1       EQU (0xFFFD4100) ;- (PDC_SSC1) Base Address
+AT91C_BASE_SSC1           EQU (0xFFFD4000) ;- (SSC1) Base Address
+AT91C_BASE_PDC_SSC0       EQU (0xFFFD0100) ;- (PDC_SSC0) Base Address
+AT91C_BASE_SSC0           EQU (0xFFFD0000) ;- (SSC0) Base Address
+AT91C_BASE_PDC_US3        EQU (0xFFFCC100) ;- (PDC_US3) Base Address
+AT91C_BASE_US3            EQU (0xFFFCC000) ;- (US3) Base Address
+AT91C_BASE_PDC_US2        EQU (0xFFFC8100) ;- (PDC_US2) Base Address
+AT91C_BASE_US2            EQU (0xFFFC8000) ;- (US2) Base Address
+AT91C_BASE_PDC_US1        EQU (0xFFFC4100) ;- (PDC_US1) Base Address
+AT91C_BASE_US1            EQU (0xFFFC4000) ;- (US1) Base Address
+AT91C_BASE_PDC_US0        EQU (0xFFFC0100) ;- (PDC_US0) Base Address
+AT91C_BASE_US0            EQU (0xFFFC0000) ;- (US0) Base Address
+AT91C_BASE_TWI            EQU (0xFFFB8000) ;- (TWI) Base Address
+AT91C_BASE_PDC_MCI        EQU (0xFFFB4100) ;- (PDC_MCI) Base Address
+AT91C_BASE_MCI            EQU (0xFFFB4000) ;- (MCI) Base Address
+AT91C_BASE_UDP            EQU (0xFFFB0000) ;- (UDP) Base Address
+AT91C_BASE_TC5            EQU (0xFFFA4080) ;- (TC5) Base Address
+AT91C_BASE_TC4            EQU (0xFFFA4040) ;- (TC4) Base Address
+AT91C_BASE_TC3            EQU (0xFFFA4000) ;- (TC3) Base Address
+AT91C_BASE_TCB1           EQU (0xFFFA4080) ;- (TCB1) Base Address
+AT91C_BASE_TC2            EQU (0xFFFA0080) ;- (TC2) Base Address
+AT91C_BASE_TC1            EQU (0xFFFA0040) ;- (TC1) Base Address
+AT91C_BASE_TC0            EQU (0xFFFA0000) ;- (TC0) Base Address
+AT91C_BASE_TCB0           EQU (0xFFFA0000) ;- (TCB0) Base Address
+AT91C_BASE_UHP            EQU (0x00300000) ;- (UHP) Base Address
+AT91C_BASE_EMAC           EQU (0xFFFBC000) ;- (EMAC) Base Address
+AT91C_BASE_EBI            EQU (0xFFFFFF60) ;- (EBI) Base Address
+AT91C_BASE_SMC2           EQU (0xFFFFFF70) ;- (SMC2) Base Address
+AT91C_BASE_SDRC           EQU (0xFFFFFF90) ;- (SDRC) Base Address
+AT91C_BASE_BFC            EQU (0xFFFFFFC0) ;- (BFC) Base Address
+
+;- *****************************************************************************
+;-               MEMORY MAPPING DEFINITIONS FOR AT91RM9200
+;- *****************************************************************************
+AT91C_ISRAM               EQU (0x00200000) ;- Internal SRAM base address
+AT91C_ISRAM_SIZE          EQU (0x00004000) ;- Internal SRAM size in byte (16 Kbyte)
+AT91C_IROM                EQU (0x00100000) ;- Internal ROM base address
+AT91C_IROM_SIZE           EQU (0x00020000) ;- Internal ROM size in byte (128 Kbyte)
+
+
+	END
diff --git a/target/linux/at91/image/dfboot/src/include/AT91RM9200_inc.h b/target/linux/at91/image/dfboot/src/include/AT91RM9200_inc.h
new file mode 100644
index 0000000..dabab01
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/include/AT91RM9200_inc.h
@@ -0,0 +1,2401 @@
+// ----------------------------------------------------------------------------
+//          ATMEL Microcontroller Software Support  -  ROUSSET  -
+// ----------------------------------------------------------------------------
+//  The software is delivered "AS IS" without warranty or condition of any
+//  kind, either express, implied or statutory. This includes without
+//  limitation any warranty or condition with respect to merchantability or
+//  fitness for any particular purpose, or against the infringements of
+//  intellectual property rights of others.
+// ----------------------------------------------------------------------------
+// File Name           : AT91RM9200.h
+// Object              : AT91RM9200 definitions
+// Generated           : AT91 SW Application Group  11/19/2003 (17:20:51)
+// 
+// CVS Reference       : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003//
+// CVS Reference       : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003//
+// CVS Reference       : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002//
+// CVS Reference       : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002//
+// CVS Reference       : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002//
+// CVS Reference       : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002//
+// CVS Reference       : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003//
+// CVS Reference       : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002//
+// CVS Reference       : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003//
+// CVS Reference       : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002//
+// CVS Reference       : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002//
+// CVS Reference       : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002//
+// CVS Reference       : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002//
+// CVS Reference       : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002//
+// CVS Reference       : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003//
+// CVS Reference       : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003//
+// CVS Reference       : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002//
+// CVS Reference       : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002//
+// CVS Reference       : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003//
+// CVS Reference       : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003//
+// CVS Reference       : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002//
+// CVS Reference       : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002//
+// CVS Reference       : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002//
+// ----------------------------------------------------------------------------
+
+// Hardware register definition
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR System Peripherals
+// *****************************************************************************
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Memory Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_MC structure ***
+#define MC_RCR          ( 0) // MC Remap Control Register
+#define MC_ASR          ( 4) // MC Abort Status Register
+#define MC_AASR         ( 8) // MC Abort Address Status Register
+#define MC_PUIA         (16) // MC Protection Unit Area
+#define MC_PUP          (80) // MC Protection Unit Peripherals
+#define MC_PUER         (84) // MC Protection Unit Enable Register
+// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- 
+#define AT91C_MC_RCB              (0x1 <<  0) // (MC) Remap Command Bit
+// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- 
+#define AT91C_MC_UNDADD           (0x1 <<  0) // (MC) Undefined Addess Abort Status
+#define AT91C_MC_MISADD           (0x1 <<  1) // (MC) Misaligned Addess Abort Status
+#define AT91C_MC_MPU              (0x1 <<  2) // (MC) Memory protection Unit Abort Status
+#define AT91C_MC_ABTSZ            (0x3 <<  8) // (MC) Abort Size Status
+#define 	AT91C_MC_ABTSZ_BYTE                 (0x0 <<  8) // (MC) Byte
+#define 	AT91C_MC_ABTSZ_HWORD                (0x1 <<  8) // (MC) Half-word
+#define 	AT91C_MC_ABTSZ_WORD                 (0x2 <<  8) // (MC) Word
+#define AT91C_MC_ABTTYP           (0x3 << 10) // (MC) Abort Type Status
+#define 	AT91C_MC_ABTTYP_DATAR                (0x0 << 10) // (MC) Data Read
+#define 	AT91C_MC_ABTTYP_DATAW                (0x1 << 10) // (MC) Data Write
+#define 	AT91C_MC_ABTTYP_FETCH                (0x2 << 10) // (MC) Code Fetch
+#define AT91C_MC_MST0             (0x1 << 16) // (MC) Master 0 Abort Source
+#define AT91C_MC_MST1             (0x1 << 17) // (MC) Master 1 Abort Source
+#define AT91C_MC_SVMST0           (0x1 << 24) // (MC) Saved Master 0 Abort Source
+#define AT91C_MC_SVMST1           (0x1 << 25) // (MC) Saved Master 1 Abort Source
+// -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- 
+#define AT91C_MC_PROT             (0x3 <<  0) // (MC) Protection
+#define 	AT91C_MC_PROT_PNAUNA               (0x0) // (MC) Privilege: No Access, User: No Access
+#define 	AT91C_MC_PROT_PRWUNA               (0x1) // (MC) Privilege: Read/Write, User: No Access
+#define 	AT91C_MC_PROT_PRWURO               (0x2) // (MC) Privilege: Read/Write, User: Read Only
+#define 	AT91C_MC_PROT_PRWURW               (0x3) // (MC) Privilege: Read/Write, User: Read/Write
+#define AT91C_MC_SIZE             (0xF <<  4) // (MC) Internal Area Size
+#define 	AT91C_MC_SIZE_1KB                  (0x0 <<  4) // (MC) Area size 1KByte
+#define 	AT91C_MC_SIZE_2KB                  (0x1 <<  4) // (MC) Area size 2KByte
+#define 	AT91C_MC_SIZE_4KB                  (0x2 <<  4) // (MC) Area size 4KByte
+#define 	AT91C_MC_SIZE_8KB                  (0x3 <<  4) // (MC) Area size 8KByte
+#define 	AT91C_MC_SIZE_16KB                 (0x4 <<  4) // (MC) Area size 16KByte
+#define 	AT91C_MC_SIZE_32KB                 (0x5 <<  4) // (MC) Area size 32KByte
+#define 	AT91C_MC_SIZE_64KB                 (0x6 <<  4) // (MC) Area size 64KByte
+#define 	AT91C_MC_SIZE_128KB                (0x7 <<  4) // (MC) Area size 128KByte
+#define 	AT91C_MC_SIZE_256KB                (0x8 <<  4) // (MC) Area size 256KByte
+#define 	AT91C_MC_SIZE_512KB                (0x9 <<  4) // (MC) Area size 512KByte
+#define 	AT91C_MC_SIZE_1MB                  (0xA <<  4) // (MC) Area size 1MByte
+#define 	AT91C_MC_SIZE_2MB                  (0xB <<  4) // (MC) Area size 2MByte
+#define 	AT91C_MC_SIZE_4MB                  (0xC <<  4) // (MC) Area size 4MByte
+#define 	AT91C_MC_SIZE_8MB                  (0xD <<  4) // (MC) Area size 8MByte
+#define 	AT91C_MC_SIZE_16MB                 (0xE <<  4) // (MC) Area size 16MByte
+#define 	AT91C_MC_SIZE_64MB                 (0xF <<  4) // (MC) Area size 64MByte
+#define AT91C_MC_BA               (0x3FFFF << 10) // (MC) Internal Area Base Address
+// -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- 
+// -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- 
+#define AT91C_MC_PUEB             (0x1 <<  0) // (MC) Protection Unit enable Bit
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Real-time Clock Alarm and Parallel Load Interface
+// *****************************************************************************
+// *** Register offset in AT91S_RTC structure ***
+#define RTC_CR          ( 0) // Control Register
+#define RTC_MR          ( 4) // Mode Register
+#define RTC_TIMR        ( 8) // Time Register
+#define RTC_CALR        (12) // Calendar Register
+#define RTC_TIMALR      (16) // Time Alarm Register
+#define RTC_CALALR      (20) // Calendar Alarm Register
+#define RTC_SR          (24) // Status Register
+#define RTC_SCCR        (28) // Status Clear Command Register
+#define RTC_IER         (32) // Interrupt Enable Register
+#define RTC_IDR         (36) // Interrupt Disable Register
+#define RTC_IMR         (40) // Interrupt Mask Register
+#define RTC_VER         (44) // Valid Entry Register
+// -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- 
+#define AT91C_RTC_UPDTIM          (0x1 <<  0) // (RTC) Update Request Time Register
+#define AT91C_RTC_UPDCAL          (0x1 <<  1) // (RTC) Update Request Calendar Register
+#define AT91C_RTC_TIMEVSEL        (0x3 <<  8) // (RTC) Time Event Selection
+#define 	AT91C_RTC_TIMEVSEL_MINUTE               (0x0 <<  8) // (RTC) Minute change.
+#define 	AT91C_RTC_TIMEVSEL_HOUR                 (0x1 <<  8) // (RTC) Hour change.
+#define 	AT91C_RTC_TIMEVSEL_DAY24                (0x2 <<  8) // (RTC) Every day at midnight.
+#define 	AT91C_RTC_TIMEVSEL_DAY12                (0x3 <<  8) // (RTC) Every day at noon.
+#define AT91C_RTC_CALEVSEL        (0x3 << 16) // (RTC) Calendar Event Selection
+#define 	AT91C_RTC_CALEVSEL_WEEK                 (0x0 << 16) // (RTC) Week change (every Monday at time 00:00:00).
+#define 	AT91C_RTC_CALEVSEL_MONTH                (0x1 << 16) // (RTC) Month change (every 01 of each month at time 00:00:00).
+#define 	AT91C_RTC_CALEVSEL_YEAR                 (0x2 << 16) // (RTC) Year change (every January 1 at time 00:00:00).
+// -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- 
+#define AT91C_RTC_HRMOD           (0x1 <<  0) // (RTC) 12-24 hour Mode
+// -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- 
+#define AT91C_RTC_SEC             (0x7F <<  0) // (RTC) Current Second
+#define AT91C_RTC_MIN             (0x7F <<  8) // (RTC) Current Minute
+#define AT91C_RTC_HOUR            (0x1F << 16) // (RTC) Current Hour
+#define AT91C_RTC_AMPM            (0x1 << 22) // (RTC) Ante Meridiem, Post Meridiem Indicator
+// -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- 
+#define AT91C_RTC_CENT            (0x3F <<  0) // (RTC) Current Century
+#define AT91C_RTC_YEAR            (0xFF <<  8) // (RTC) Current Year
+#define AT91C_RTC_MONTH           (0x1F << 16) // (RTC) Current Month
+#define AT91C_RTC_DAY             (0x7 << 21) // (RTC) Current Day
+#define AT91C_RTC_DATE            (0x3F << 24) // (RTC) Current Date
+// -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- 
+#define AT91C_RTC_SECEN           (0x1 <<  7) // (RTC) Second Alarm Enable
+#define AT91C_RTC_MINEN           (0x1 << 15) // (RTC) Minute Alarm
+#define AT91C_RTC_HOUREN          (0x1 << 23) // (RTC) Current Hour
+// -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- 
+#define AT91C_RTC_MONTHEN         (0x1 << 23) // (RTC) Month Alarm Enable
+#define AT91C_RTC_DATEEN          (0x1 << 31) // (RTC) Date Alarm Enable
+// -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- 
+#define AT91C_RTC_ACKUPD          (0x1 <<  0) // (RTC) Acknowledge for Update
+#define AT91C_RTC_ALARM           (0x1 <<  1) // (RTC) Alarm Flag
+#define AT91C_RTC_SECEV           (0x1 <<  2) // (RTC) Second Event
+#define AT91C_RTC_TIMEV           (0x1 <<  3) // (RTC) Time Event
+#define AT91C_RTC_CALEV           (0x1 <<  4) // (RTC) Calendar event
+// -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- 
+// -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- 
+// -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- 
+// -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- 
+// -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- 
+#define AT91C_RTC_NVTIM           (0x1 <<  0) // (RTC) Non valid Time
+#define AT91C_RTC_NVCAL           (0x1 <<  1) // (RTC) Non valid Calendar
+#define AT91C_RTC_NVTIMALR        (0x1 <<  2) // (RTC) Non valid time Alarm
+#define AT91C_RTC_NVCALALR        (0x1 <<  3) // (RTC) Nonvalid Calendar Alarm
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR System Timer Interface
+// *****************************************************************************
+// *** Register offset in AT91S_ST structure ***
+#define ST_CR           ( 0) // Control Register
+#define ST_PIMR         ( 4) // Period Interval Mode Register
+#define ST_WDMR         ( 8) // Watchdog Mode Register
+#define ST_RTMR         (12) // Real-time Mode Register
+#define ST_SR           (16) // Status Register
+#define ST_IER          (20) // Interrupt Enable Register
+#define ST_IDR          (24) // Interrupt Disable Register
+#define ST_IMR          (28) // Interrupt Mask Register
+#define ST_RTAR         (32) // Real-time Alarm Register
+#define ST_CRTR         (36) // Current Real-time Register
+// -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- 
+#define AT91C_ST_WDRST            (0x1 <<  0) // (ST) Watchdog Timer Restart
+// -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- 
+#define AT91C_ST_PIV              (0xFFFF <<  0) // (ST) Watchdog Timer Restart
+// -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- 
+#define AT91C_ST_WDV              (0xFFFF <<  0) // (ST) Watchdog Timer Restart
+#define AT91C_ST_RSTEN            (0x1 << 16) // (ST) Reset Enable
+#define AT91C_ST_EXTEN            (0x1 << 17) // (ST) External Signal Assertion Enable
+// -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- 
+#define AT91C_ST_RTPRES           (0xFFFF <<  0) // (ST) Real-time Timer Prescaler Value
+// -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- 
+#define AT91C_ST_PITS             (0x1 <<  0) // (ST) Period Interval Timer Interrupt
+#define AT91C_ST_WDOVF            (0x1 <<  1) // (ST) Watchdog Overflow
+#define AT91C_ST_RTTINC           (0x1 <<  2) // (ST) Real-time Timer Increment
+#define AT91C_ST_ALMS             (0x1 <<  3) // (ST) Alarm Status
+// -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- 
+// -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- 
+// -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- 
+// -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- 
+#define AT91C_ST_ALMV             (0xFFFFF <<  0) // (ST) Alarm Value Value
+// -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- 
+#define AT91C_ST_CRTV             (0xFFFFF <<  0) // (ST) Current Real-time Value
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Power Management Controler
+// *****************************************************************************
+// *** Register offset in AT91S_PMC structure ***
+#define PMC_SCER        ( 0) // System Clock Enable Register
+#define PMC_SCDR        ( 4) // System Clock Disable Register
+#define PMC_SCSR        ( 8) // System Clock Status Register
+#define PMC_PCER        (16) // Peripheral Clock Enable Register
+#define PMC_PCDR        (20) // Peripheral Clock Disable Register
+#define PMC_PCSR        (24) // Peripheral Clock Status Register
+#define PMC_MCKR        (48) // Master Clock Register
+#define PMC_PCKR        (64) // Programmable Clock Register
+#define PMC_IER         (96) // Interrupt Enable Register
+#define PMC_IDR         (100) // Interrupt Disable Register
+#define PMC_SR          (104) // Status Register
+#define PMC_IMR         (108) // Interrupt Mask Register
+// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- 
+#define AT91C_PMC_PCK             (0x1 <<  0) // (PMC) Processor Clock
+#define AT91C_PMC_UDP             (0x1 <<  1) // (PMC) USB Device Port Clock
+#define AT91C_PMC_MCKUDP          (0x1 <<  2) // (PMC) USB Device Port Master Clock Automatic Disable on Suspend
+#define AT91C_PMC_UHP             (0x1 <<  4) // (PMC) USB Host Port Clock
+#define AT91C_PMC_PCK0            (0x1 <<  8) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK1            (0x1 <<  9) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK2            (0x1 << 10) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK3            (0x1 << 11) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK4            (0x1 << 12) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK5            (0x1 << 13) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK6            (0x1 << 14) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK7            (0x1 << 15) // (PMC) Programmable Clock Output
+// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- 
+// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- 
+// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- 
+#define AT91C_PMC_CSS             (0x3 <<  0) // (PMC) Programmable Clock Selection
+#define 	AT91C_PMC_CSS_SLOW_CLK             (0x0) // (PMC) Slow Clock is selected
+#define 	AT91C_PMC_CSS_MAIN_CLK             (0x1) // (PMC) Main Clock is selected
+#define 	AT91C_PMC_CSS_PLLA_CLK             (0x2) // (PMC) Clock from PLL A is selected
+#define 	AT91C_PMC_CSS_PLLB_CLK             (0x3) // (PMC) Clock from PLL B is selected
+#define AT91C_PMC_PRES            (0x7 <<  2) // (PMC) Programmable Clock Prescaler
+#define 	AT91C_PMC_PRES_CLK                  (0x0 <<  2) // (PMC) Selected clock
+#define 	AT91C_PMC_PRES_CLK_2                (0x1 <<  2) // (PMC) Selected clock divided by 2
+#define 	AT91C_PMC_PRES_CLK_4                (0x2 <<  2) // (PMC) Selected clock divided by 4
+#define 	AT91C_PMC_PRES_CLK_8                (0x3 <<  2) // (PMC) Selected clock divided by 8
+#define 	AT91C_PMC_PRES_CLK_16               (0x4 <<  2) // (PMC) Selected clock divided by 16
+#define 	AT91C_PMC_PRES_CLK_32               (0x5 <<  2) // (PMC) Selected clock divided by 32
+#define 	AT91C_PMC_PRES_CLK_64               (0x6 <<  2) // (PMC) Selected clock divided by 64
+#define AT91C_PMC_MDIV            (0x3 <<  8) // (PMC) Master Clock Division
+#define 	AT91C_PMC_MDIV_1                    (0x0 <<  8) // (PMC) The master clock and the processor clock are the same
+#define 	AT91C_PMC_MDIV_2                    (0x1 <<  8) // (PMC) The processor clock is twice as fast as the master clock
+#define 	AT91C_PMC_MDIV_3                    (0x2 <<  8) // (PMC) The processor clock is three times faster than the master clock
+#define 	AT91C_PMC_MDIV_4                    (0x3 <<  8) // (PMC) The processor clock is four times faster than the master clock
+// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- 
+// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- 
+#define AT91C_PMC_MOSCS           (0x1 <<  0) // (PMC) MOSC Status/Enable/Disable/Mask
+#define AT91C_PMC_LOCKA           (0x1 <<  1) // (PMC) PLL A Status/Enable/Disable/Mask
+#define AT91C_PMC_LOCKB           (0x1 <<  2) // (PMC) PLL B Status/Enable/Disable/Mask
+#define AT91C_PMC_MCKRDY          (0x1 <<  3) // (PMC) MCK_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK0RDY         (0x1 <<  8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK1RDY         (0x1 <<  9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK2RDY         (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK3RDY         (0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK4RDY         (0x1 << 12) // (PMC) PCK4_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK5RDY         (0x1 << 13) // (PMC) PCK5_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK6RDY         (0x1 << 14) // (PMC) PCK6_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK7RDY         (0x1 << 15) // (PMC) PCK7_RDY Status/Enable/Disable/Mask
+// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- 
+// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- 
+// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Clock Generator Controler
+// *****************************************************************************
+// *** Register offset in AT91S_CKGR structure ***
+#define CKGR_MOR        ( 0) // Main Oscillator Register
+#define CKGR_MCFR       ( 4) // Main Clock  Frequency Register
+#define CKGR_PLLAR      ( 8) // PLL A Register
+#define CKGR_PLLBR      (12) // PLL B Register
+// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- 
+#define AT91C_CKGR_MOSCEN         (0x1 <<  0) // (CKGR) Main Oscillator Enable
+#define AT91C_CKGR_OSCTEST        (0x1 <<  1) // (CKGR) Oscillator Test
+#define AT91C_CKGR_OSCOUNT        (0xFF <<  8) // (CKGR) Main Oscillator Start-up Time
+// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- 
+#define AT91C_CKGR_MAINF          (0xFFFF <<  0) // (CKGR) Main Clock Frequency
+#define AT91C_CKGR_MAINRDY        (0x1 << 16) // (CKGR) Main Clock Ready
+// -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- 
+#define AT91C_CKGR_DIVA           (0xFF <<  0) // (CKGR) Divider Selected
+#define 	AT91C_CKGR_DIVA_0                    (0x0) // (CKGR) Divider output is 0
+#define 	AT91C_CKGR_DIVA_BYPASS               (0x1) // (CKGR) Divider is bypassed
+#define AT91C_CKGR_PLLACOUNT      (0x3F <<  8) // (CKGR) PLL A Counter
+#define AT91C_CKGR_OUTA           (0x3 << 14) // (CKGR) PLL A Output Frequency Range
+#define 	AT91C_CKGR_OUTA_0                    (0x0 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define 	AT91C_CKGR_OUTA_1                    (0x1 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define 	AT91C_CKGR_OUTA_2                    (0x2 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define 	AT91C_CKGR_OUTA_3                    (0x3 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define AT91C_CKGR_MULA           (0x7FF << 16) // (CKGR) PLL A Multiplier
+#define AT91C_CKGR_SRCA           (0x1 << 29) // (CKGR) PLL A Source
+// -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- 
+#define AT91C_CKGR_DIVB           (0xFF <<  0) // (CKGR) Divider Selected
+#define 	AT91C_CKGR_DIVB_0                    (0x0) // (CKGR) Divider output is 0
+#define 	AT91C_CKGR_DIVB_BYPASS               (0x1) // (CKGR) Divider is bypassed
+#define AT91C_CKGR_PLLBCOUNT      (0x3F <<  8) // (CKGR) PLL B Counter
+#define AT91C_CKGR_OUTB           (0x3 << 14) // (CKGR) PLL B Output Frequency Range
+#define 	AT91C_CKGR_OUTB_0                    (0x0 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define 	AT91C_CKGR_OUTB_1                    (0x1 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define 	AT91C_CKGR_OUTB_2                    (0x2 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define 	AT91C_CKGR_OUTB_3                    (0x3 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define AT91C_CKGR_MULB           (0x7FF << 16) // (CKGR) PLL B Multiplier
+#define AT91C_CKGR_USB_96M        (0x1 << 28) // (CKGR) Divider for USB Ports
+#define AT91C_CKGR_USB_PLL        (0x1 << 29) // (CKGR) PLL Use
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Parallel Input Output Controler
+// *****************************************************************************
+// *** Register offset in AT91S_PIO structure ***
+#define PIO_PER         ( 0) // PIO Enable Register
+#define PIO_PDR         ( 4) // PIO Disable Register
+#define PIO_PSR         ( 8) // PIO Status Register
+#define PIO_OER         (16) // Output Enable Register
+#define PIO_ODR         (20) // Output Disable Registerr
+#define PIO_OSR         (24) // Output Status Register
+#define PIO_IFER        (32) // Input Filter Enable Register
+#define PIO_IFDR        (36) // Input Filter Disable Register
+#define PIO_IFSR        (40) // Input Filter Status Register
+#define PIO_SODR        (48) // Set Output Data Register
+#define PIO_CODR        (52) // Clear Output Data Register
+#define PIO_ODSR        (56) // Output Data Status Register
+#define PIO_PDSR        (60) // Pin Data Status Register
+#define PIO_IER         (64) // Interrupt Enable Register
+#define PIO_IDR         (68) // Interrupt Disable Register
+#define PIO_IMR         (72) // Interrupt Mask Register
+#define PIO_ISR         (76) // Interrupt Status Register
+#define PIO_MDER        (80) // Multi-driver Enable Register
+#define PIO_MDDR        (84) // Multi-driver Disable Register
+#define PIO_MDSR        (88) // Multi-driver Status Register
+#define PIO_PPUDR       (96) // Pull-up Disable Register
+#define PIO_PPUER       (100) // Pull-up Enable Register
+#define PIO_PPUSR       (104) // Pad Pull-up Status Register
+#define PIO_ASR         (112) // Select A Register
+#define PIO_BSR         (116) // Select B Register
+#define PIO_ABSR        (120) // AB Select Status Register
+#define PIO_OWER        (160) // Output Write Enable Register
+#define PIO_OWDR        (164) // Output Write Disable Register
+#define PIO_OWSR        (168) // Output Write Status Register
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Debug Unit
+// *****************************************************************************
+// *** Register offset in AT91S_DBGU structure ***
+#define DBGU_CR         ( 0) // Control Register
+#define DBGU_MR         ( 4) // Mode Register
+#define DBGU_IER        ( 8) // Interrupt Enable Register
+#define DBGU_IDR        (12) // Interrupt Disable Register
+#define DBGU_IMR        (16) // Interrupt Mask Register
+#define DBGU_CSR        (20) // Channel Status Register
+#define DBGU_RHR        (24) // Receiver Holding Register
+#define DBGU_THR        (28) // Transmitter Holding Register
+#define DBGU_BRGR       (32) // Baud Rate Generator Register
+#define DBGU_C1R        (64) // Chip ID1 Register
+#define DBGU_C2R        (68) // Chip ID2 Register
+#define DBGU_FNTR       (72) // Force NTRST Register
+#define DBGU_RPR        (256) // Receive Pointer Register
+#define DBGU_RCR        (260) // Receive Counter Register
+#define DBGU_TPR        (264) // Transmit Pointer Register
+#define DBGU_TCR        (268) // Transmit Counter Register
+#define DBGU_RNPR       (272) // Receive Next Pointer Register
+#define DBGU_RNCR       (276) // Receive Next Counter Register
+#define DBGU_TNPR       (280) // Transmit Next Pointer Register
+#define DBGU_TNCR       (284) // Transmit Next Counter Register
+#define DBGU_PTCR       (288) // PDC Transfer Control Register
+#define DBGU_PTSR       (292) // PDC Transfer Status Register
+// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- 
+#define AT91C_US_RSTRX            (0x1 <<  2) // (DBGU) Reset Receiver
+#define AT91C_US_RSTTX            (0x1 <<  3) // (DBGU) Reset Transmitter
+#define AT91C_US_RXEN             (0x1 <<  4) // (DBGU) Receiver Enable
+#define AT91C_US_RXDIS            (0x1 <<  5) // (DBGU) Receiver Disable
+#define AT91C_US_TXEN             (0x1 <<  6) // (DBGU) Transmitter Enable
+#define AT91C_US_TXDIS            (0x1 <<  7) // (DBGU) Transmitter Disable
+// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- 
+#define AT91C_US_PAR              (0x7 <<  9) // (DBGU) Parity type
+#define 	AT91C_US_PAR_EVEN                 (0x0 <<  9) // (DBGU) Even Parity
+#define 	AT91C_US_PAR_ODD                  (0x1 <<  9) // (DBGU) Odd Parity
+#define 	AT91C_US_PAR_SPACE                (0x2 <<  9) // (DBGU) Parity forced to 0 (Space)
+#define 	AT91C_US_PAR_MARK                 (0x3 <<  9) // (DBGU) Parity forced to 1 (Mark)
+#define 	AT91C_US_PAR_NONE                 (0x4 <<  9) // (DBGU) No Parity
+#define 	AT91C_US_PAR_MULTI_DROP           (0x6 <<  9) // (DBGU) Multi-drop mode
+#define AT91C_US_CHMODE           (0x3 << 14) // (DBGU) Channel Mode
+#define 	AT91C_US_CHMODE_NORMAL               (0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART.
+#define 	AT91C_US_CHMODE_AUTO                 (0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin.
+#define 	AT91C_US_CHMODE_LOCAL                (0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal.
+#define 	AT91C_US_CHMODE_REMOTE               (0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin.
+// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
+#define AT91C_US_RXRDY            (0x1 <<  0) // (DBGU) RXRDY Interrupt
+#define AT91C_US_TXRDY            (0x1 <<  1) // (DBGU) TXRDY Interrupt
+#define AT91C_US_ENDRX            (0x1 <<  3) // (DBGU) End of Receive Transfer Interrupt
+#define AT91C_US_ENDTX            (0x1 <<  4) // (DBGU) End of Transmit Interrupt
+#define AT91C_US_OVRE             (0x1 <<  5) // (DBGU) Overrun Interrupt
+#define AT91C_US_FRAME            (0x1 <<  6) // (DBGU) Framing Error Interrupt
+#define AT91C_US_PARE             (0x1 <<  7) // (DBGU) Parity Error Interrupt
+#define AT91C_US_TXEMPTY          (0x1 <<  9) // (DBGU) TXEMPTY Interrupt
+#define AT91C_US_TXBUFE           (0x1 << 11) // (DBGU) TXBUFE Interrupt
+#define AT91C_US_RXBUFF           (0x1 << 12) // (DBGU) RXBUFF Interrupt
+#define AT91C_US_COMM_TX          (0x1 << 30) // (DBGU) COMM_TX Interrupt
+#define AT91C_US_COMM_RX          (0x1 << 31) // (DBGU) COMM_RX Interrupt
+// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
+// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
+// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- 
+// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- 
+#define AT91C_US_FORCE_NTRST      (0x1 <<  0) // (DBGU) Force NTRST in JTAG
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Peripheral Data Controller
+// *****************************************************************************
+// *** Register offset in AT91S_PDC structure ***
+#define PDC_RPR         ( 0) // Receive Pointer Register
+#define PDC_RCR         ( 4) // Receive Counter Register
+#define PDC_TPR         ( 8) // Transmit Pointer Register
+#define PDC_TCR         (12) // Transmit Counter Register
+#define PDC_RNPR        (16) // Receive Next Pointer Register
+#define PDC_RNCR        (20) // Receive Next Counter Register
+#define PDC_TNPR        (24) // Transmit Next Pointer Register
+#define PDC_TNCR        (28) // Transmit Next Counter Register
+#define PDC_PTCR        (32) // PDC Transfer Control Register
+#define PDC_PTSR        (36) // PDC Transfer Status Register
+// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- 
+#define AT91C_PDC_RXTEN           (0x1 <<  0) // (PDC) Receiver Transfer Enable
+#define AT91C_PDC_RXTDIS          (0x1 <<  1) // (PDC) Receiver Transfer Disable
+#define AT91C_PDC_TXTEN           (0x1 <<  8) // (PDC) Transmitter Transfer Enable
+#define AT91C_PDC_TXTDIS          (0x1 <<  9) // (PDC) Transmitter Transfer Disable
+// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Advanced Interrupt Controller
+// *****************************************************************************
+// *** Register offset in AT91S_AIC structure ***
+#define AIC_SMR         ( 0) // Source Mode Register
+#define AIC_SVR         (128) // Source Vector Register
+#define AIC_IVR         (256) // IRQ Vector Register
+#define AIC_FVR         (260) // FIQ Vector Register
+#define AIC_ISR         (264) // Interrupt Status Register
+#define AIC_IPR         (268) // Interrupt Pending Register
+#define AIC_IMR         (272) // Interrupt Mask Register
+#define AIC_CISR        (276) // Core Interrupt Status Register
+#define AIC_IECR        (288) // Interrupt Enable Command Register
+#define AIC_IDCR        (292) // Interrupt Disable Command Register
+#define AIC_ICCR        (296) // Interrupt Clear Command Register
+#define AIC_ISCR        (300) // Interrupt Set Command Register
+#define AIC_EOICR       (304) // End of Interrupt Command Register
+#define AIC_SPU         (308) // Spurious Vector Register
+#define AIC_DCR         (312) // Debug Control Register (Protect)
+#define AIC_FFER        (320) // Fast Forcing Enable Register
+#define AIC_FFDR        (324) // Fast Forcing Disable Register
+#define AIC_FFSR        (328) // Fast Forcing Status Register
+// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- 
+#define AT91C_AIC_PRIOR           (0x7 <<  0) // (AIC) Priority Level
+#define 	AT91C_AIC_PRIOR_LOWEST               (0x0) // (AIC) Lowest priority level
+#define 	AT91C_AIC_PRIOR_HIGHEST              (0x7) // (AIC) Highest priority level
+#define AT91C_AIC_SRCTYPE         (0x3 <<  5) // (AIC) Interrupt Source Type
+#define 	AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE  (0x0 <<  5) // (AIC) Internal Sources Code Label Level Sensitive
+#define 	AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED   (0x1 <<  5) // (AIC) Internal Sources Code Label Edge triggered
+#define 	AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL       (0x2 <<  5) // (AIC) External Sources Code Label High-level Sensitive
+#define 	AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE    (0x3 <<  5) // (AIC) External Sources Code Label Positive Edge triggered
+// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- 
+#define AT91C_AIC_NFIQ            (0x1 <<  0) // (AIC) NFIQ Status
+#define AT91C_AIC_NIRQ            (0x1 <<  1) // (AIC) NIRQ Status
+// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- 
+#define AT91C_AIC_DCR_PROT        (0x1 <<  0) // (AIC) Protection Mode
+#define AT91C_AIC_DCR_GMSK        (0x1 <<  1) // (AIC) General Mask
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Serial Parallel Interface
+// *****************************************************************************
+// *** Register offset in AT91S_SPI structure ***
+#define SPI_CR          ( 0) // Control Register
+#define SPI_MR          ( 4) // Mode Register
+#define SPI_RDR         ( 8) // Receive Data Register
+#define SPI_TDR         (12) // Transmit Data Register
+#define SPI_SR          (16) // Status Register
+#define SPI_IER         (20) // Interrupt Enable Register
+#define SPI_IDR         (24) // Interrupt Disable Register
+#define SPI_IMR         (28) // Interrupt Mask Register
+#define SPI_CSR         (48) // Chip Select Register
+#define SPI_RPR         (256) // Receive Pointer Register
+#define SPI_RCR         (260) // Receive Counter Register
+#define SPI_TPR         (264) // Transmit Pointer Register
+#define SPI_TCR         (268) // Transmit Counter Register
+#define SPI_RNPR        (272) // Receive Next Pointer Register
+#define SPI_RNCR        (276) // Receive Next Counter Register
+#define SPI_TNPR        (280) // Transmit Next Pointer Register
+#define SPI_TNCR        (284) // Transmit Next Counter Register
+#define SPI_PTCR        (288) // PDC Transfer Control Register
+#define SPI_PTSR        (292) // PDC Transfer Status Register
+// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- 
+#define AT91C_SPI_SPIEN           (0x1 <<  0) // (SPI) SPI Enable
+#define AT91C_SPI_SPIDIS          (0x1 <<  1) // (SPI) SPI Disable
+#define AT91C_SPI_SWRST           (0x1 <<  7) // (SPI) SPI Software reset
+// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- 
+#define AT91C_SPI_MSTR            (0x1 <<  0) // (SPI) Master/Slave Mode
+#define AT91C_SPI_PS              (0x1 <<  1) // (SPI) Peripheral Select
+#define 	AT91C_SPI_PS_FIXED                (0x0 <<  1) // (SPI) Fixed Peripheral Select
+#define 	AT91C_SPI_PS_VARIABLE             (0x1 <<  1) // (SPI) Variable Peripheral Select
+#define AT91C_SPI_PCSDEC          (0x1 <<  2) // (SPI) Chip Select Decode
+#define AT91C_SPI_DIV32           (0x1 <<  3) // (SPI) Clock Selection
+#define AT91C_SPI_MODFDIS         (0x1 <<  4) // (SPI) Mode Fault Detection
+#define AT91C_SPI_LLB             (0x1 <<  7) // (SPI) Clock Selection
+#define AT91C_SPI_PCS             (0xF << 16) // (SPI) Peripheral Chip Select
+#define AT91C_SPI_DLYBCS          (0xFF << 24) // (SPI) Delay Between Chip Selects
+// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- 
+#define AT91C_SPI_RD              (0xFFFF <<  0) // (SPI) Receive Data
+#define AT91C_SPI_RPCS            (0xF << 16) // (SPI) Peripheral Chip Select Status
+// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- 
+#define AT91C_SPI_TD              (0xFFFF <<  0) // (SPI) Transmit Data
+#define AT91C_SPI_TPCS            (0xF << 16) // (SPI) Peripheral Chip Select Status
+// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- 
+#define AT91C_SPI_RDRF            (0x1 <<  0) // (SPI) Receive Data Register Full
+#define AT91C_SPI_TDRE            (0x1 <<  1) // (SPI) Transmit Data Register Empty
+#define AT91C_SPI_MODF            (0x1 <<  2) // (SPI) Mode Fault Error
+#define AT91C_SPI_OVRES           (0x1 <<  3) // (SPI) Overrun Error Status
+#define AT91C_SPI_SPENDRX         (0x1 <<  4) // (SPI) End of Receiver Transfer
+#define AT91C_SPI_SPENDTX         (0x1 <<  5) // (SPI) End of Receiver Transfer
+#define AT91C_SPI_RXBUFF          (0x1 <<  6) // (SPI) RXBUFF Interrupt
+#define AT91C_SPI_TXBUFE          (0x1 <<  7) // (SPI) TXBUFE Interrupt
+#define AT91C_SPI_SPIENS          (0x1 << 16) // (SPI) Enable Status
+// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- 
+// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- 
+// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- 
+// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- 
+#define AT91C_SPI_CPOL            (0x1 <<  0) // (SPI) Clock Polarity
+#define AT91C_SPI_NCPHA           (0x1 <<  1) // (SPI) Clock Phase
+#define AT91C_SPI_BITS            (0xF <<  4) // (SPI) Bits Per Transfer
+#define 	AT91C_SPI_BITS_8                    (0x0 <<  4) // (SPI) 8 Bits Per transfer
+#define 	AT91C_SPI_BITS_9                    (0x1 <<  4) // (SPI) 9 Bits Per transfer
+#define 	AT91C_SPI_BITS_10                   (0x2 <<  4) // (SPI) 10 Bits Per transfer
+#define 	AT91C_SPI_BITS_11                   (0x3 <<  4) // (SPI) 11 Bits Per transfer
+#define 	AT91C_SPI_BITS_12                   (0x4 <<  4) // (SPI) 12 Bits Per transfer
+#define 	AT91C_SPI_BITS_13                   (0x5 <<  4) // (SPI) 13 Bits Per transfer
+#define 	AT91C_SPI_BITS_14                   (0x6 <<  4) // (SPI) 14 Bits Per transfer
+#define 	AT91C_SPI_BITS_15                   (0x7 <<  4) // (SPI) 15 Bits Per transfer
+#define 	AT91C_SPI_BITS_16                   (0x8 <<  4) // (SPI) 16 Bits Per transfer
+#define AT91C_SPI_SCBR            (0xFF <<  8) // (SPI) Serial Clock Baud Rate
+#define AT91C_SPI_DLYBS           (0xFF << 16) // (SPI) Serial Clock Baud Rate
+#define AT91C_SPI_DLYBCT          (0xFF << 24) // (SPI) Delay Between Consecutive Transfers
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Synchronous Serial Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_SSC structure ***
+#define SSC_CR          ( 0) // Control Register
+#define SSC_CMR         ( 4) // Clock Mode Register
+#define SSC_RCMR        (16) // Receive Clock ModeRegister
+#define SSC_RFMR        (20) // Receive Frame Mode Register
+#define SSC_TCMR        (24) // Transmit Clock Mode Register
+#define SSC_TFMR        (28) // Transmit Frame Mode Register
+#define SSC_RHR         (32) // Receive Holding Register
+#define SSC_THR         (36) // Transmit Holding Register
+#define SSC_RSHR        (48) // Receive Sync Holding Register
+#define SSC_TSHR        (52) // Transmit Sync Holding Register
+#define SSC_RC0R        (56) // Receive Compare 0 Register
+#define SSC_RC1R        (60) // Receive Compare 1 Register
+#define SSC_SR          (64) // Status Register
+#define SSC_IER         (68) // Interrupt Enable Register
+#define SSC_IDR         (72) // Interrupt Disable Register
+#define SSC_IMR         (76) // Interrupt Mask Register
+#define SSC_RPR         (256) // Receive Pointer Register
+#define SSC_RCR         (260) // Receive Counter Register
+#define SSC_TPR         (264) // Transmit Pointer Register
+#define SSC_TCR         (268) // Transmit Counter Register
+#define SSC_RNPR        (272) // Receive Next Pointer Register
+#define SSC_RNCR        (276) // Receive Next Counter Register
+#define SSC_TNPR        (280) // Transmit Next Pointer Register
+#define SSC_TNCR        (284) // Transmit Next Counter Register
+#define SSC_PTCR        (288) // PDC Transfer Control Register
+#define SSC_PTSR        (292) // PDC Transfer Status Register
+// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- 
+#define AT91C_SSC_RXEN            (0x1 <<  0) // (SSC) Receive Enable
+#define AT91C_SSC_RXDIS           (0x1 <<  1) // (SSC) Receive Disable
+#define AT91C_SSC_TXEN            (0x1 <<  8) // (SSC) Transmit Enable
+#define AT91C_SSC_TXDIS           (0x1 <<  9) // (SSC) Transmit Disable
+#define AT91C_SSC_SWRST           (0x1 << 15) // (SSC) Software Reset
+// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- 
+#define AT91C_SSC_CKS             (0x3 <<  0) // (SSC) Receive/Transmit Clock Selection
+#define 	AT91C_SSC_CKS_DIV                  (0x0) // (SSC) Divided Clock
+#define 	AT91C_SSC_CKS_TK                   (0x1) // (SSC) TK Clock signal
+#define 	AT91C_SSC_CKS_RK                   (0x2) // (SSC) RK pin
+#define AT91C_SSC_CKO             (0x7 <<  2) // (SSC) Receive/Transmit Clock Output Mode Selection
+#define 	AT91C_SSC_CKO_NONE                 (0x0 <<  2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only
+#define 	AT91C_SSC_CKO_CONTINOUS            (0x1 <<  2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output
+#define 	AT91C_SSC_CKO_DATA_TX              (0x2 <<  2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output
+#define AT91C_SSC_CKI             (0x1 <<  5) // (SSC) Receive/Transmit Clock Inversion
+#define AT91C_SSC_CKG             (0x3 <<  6) // (SSC) Receive/Transmit Clock Gating Selection
+#define 	AT91C_SSC_CKG_NONE                 (0x0 <<  6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock
+#define 	AT91C_SSC_CKG_LOW                  (0x1 <<  6) // (SSC) Receive/Transmit Clock enabled only if RF Low
+#define 	AT91C_SSC_CKG_HIGH                 (0x2 <<  6) // (SSC) Receive/Transmit Clock enabled only if RF High
+#define AT91C_SSC_START           (0xF <<  8) // (SSC) Receive/Transmit Start Selection
+#define 	AT91C_SSC_START_CONTINOUS            (0x0 <<  8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
+#define 	AT91C_SSC_START_TX                   (0x1 <<  8) // (SSC) Transmit/Receive start
+#define 	AT91C_SSC_START_LOW_RF               (0x2 <<  8) // (SSC) Detection of a low level on RF input
+#define 	AT91C_SSC_START_HIGH_RF              (0x3 <<  8) // (SSC) Detection of a high level on RF input
+#define 	AT91C_SSC_START_FALL_RF              (0x4 <<  8) // (SSC) Detection of a falling edge on RF input
+#define 	AT91C_SSC_START_RISE_RF              (0x5 <<  8) // (SSC) Detection of a rising edge on RF input
+#define 	AT91C_SSC_START_LEVEL_RF             (0x6 <<  8) // (SSC) Detection of any level change on RF input
+#define 	AT91C_SSC_START_EDGE_RF              (0x7 <<  8) // (SSC) Detection of any edge on RF input
+#define 	AT91C_SSC_START_0                    (0x8 <<  8) // (SSC) Compare 0
+#define AT91C_SSC_STOP            (0x1 << 12) // (SSC) Receive Stop Selection
+#define AT91C_SSC_STTOUT          (0x1 << 15) // (SSC) Receive/Transmit Start Output Selection
+#define AT91C_SSC_STTDLY          (0xFF << 16) // (SSC) Receive/Transmit Start Delay
+#define AT91C_SSC_PERIOD          (0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection
+// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- 
+#define AT91C_SSC_DATLEN          (0x1F <<  0) // (SSC) Data Length
+#define AT91C_SSC_LOOP            (0x1 <<  5) // (SSC) Loop Mode
+#define AT91C_SSC_MSBF            (0x1 <<  7) // (SSC) Most Significant Bit First
+#define AT91C_SSC_DATNB           (0xF <<  8) // (SSC) Data Number per Frame
+#define AT91C_SSC_FSLEN           (0xF << 16) // (SSC) Receive/Transmit Frame Sync length
+#define AT91C_SSC_FSOS            (0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection
+#define 	AT91C_SSC_FSOS_NONE                 (0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only
+#define 	AT91C_SSC_FSOS_NEGATIVE             (0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse
+#define 	AT91C_SSC_FSOS_POSITIVE             (0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse
+#define 	AT91C_SSC_FSOS_LOW                  (0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer
+#define 	AT91C_SSC_FSOS_HIGH                 (0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer
+#define 	AT91C_SSC_FSOS_TOGGLE               (0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer
+#define AT91C_SSC_FSEDGE          (0x1 << 24) // (SSC) Frame Sync Edge Detection
+// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- 
+// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- 
+#define AT91C_SSC_DATDEF          (0x1 <<  5) // (SSC) Data Default Value
+#define AT91C_SSC_FSDEN           (0x1 << 23) // (SSC) Frame Sync Data Enable
+// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- 
+#define AT91C_SSC_TXRDY           (0x1 <<  0) // (SSC) Transmit Ready
+#define AT91C_SSC_TXEMPTY         (0x1 <<  1) // (SSC) Transmit Empty
+#define AT91C_SSC_ENDTX           (0x1 <<  2) // (SSC) End Of Transmission
+#define AT91C_SSC_TXBUFE          (0x1 <<  3) // (SSC) Transmit Buffer Empty
+#define AT91C_SSC_RXRDY           (0x1 <<  4) // (SSC) Receive Ready
+#define AT91C_SSC_OVRUN           (0x1 <<  5) // (SSC) Receive Overrun
+#define AT91C_SSC_ENDRX           (0x1 <<  6) // (SSC) End of Reception
+#define AT91C_SSC_RXBUFF          (0x1 <<  7) // (SSC) Receive Buffer Full
+#define AT91C_SSC_CP0             (0x1 <<  8) // (SSC) Compare 0
+#define AT91C_SSC_CP1             (0x1 <<  9) // (SSC) Compare 1
+#define AT91C_SSC_TXSYN           (0x1 << 10) // (SSC) Transmit Sync
+#define AT91C_SSC_RXSYN           (0x1 << 11) // (SSC) Receive Sync
+#define AT91C_SSC_TXENA           (0x1 << 16) // (SSC) Transmit Enable
+#define AT91C_SSC_RXENA           (0x1 << 17) // (SSC) Receive Enable
+// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- 
+// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- 
+// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Usart
+// *****************************************************************************
+// *** Register offset in AT91S_USART structure ***
+#define US_CR           ( 0) // Control Register
+#define US_MR           ( 4) // Mode Register
+#define US_IER          ( 8) // Interrupt Enable Register
+#define US_IDR          (12) // Interrupt Disable Register
+#define US_IMR          (16) // Interrupt Mask Register
+#define US_CSR          (20) // Channel Status Register
+#define US_RHR          (24) // Receiver Holding Register
+#define US_THR          (28) // Transmitter Holding Register
+#define US_BRGR         (32) // Baud Rate Generator Register
+#define US_RTOR         (36) // Receiver Time-out Register
+#define US_TTGR         (40) // Transmitter Time-guard Register
+#define US_FIDI         (64) // FI_DI_Ratio Register
+#define US_NER          (68) // Nb Errors Register
+#define US_XXR          (72) // XON_XOFF Register
+#define US_IF           (76) // IRDA_FILTER Register
+#define US_RPR          (256) // Receive Pointer Register
+#define US_RCR          (260) // Receive Counter Register
+#define US_TPR          (264) // Transmit Pointer Register
+#define US_TCR          (268) // Transmit Counter Register
+#define US_RNPR         (272) // Receive Next Pointer Register
+#define US_RNCR         (276) // Receive Next Counter Register
+#define US_TNPR         (280) // Transmit Next Pointer Register
+#define US_TNCR         (284) // Transmit Next Counter Register
+#define US_PTCR         (288) // PDC Transfer Control Register
+#define US_PTSR         (292) // PDC Transfer Status Register
+// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- 
+#define AT91C_US_RSTSTA           (0x1 <<  8) // (USART) Reset Status Bits
+#define AT91C_US_STTBRK           (0x1 <<  9) // (USART) Start Break
+#define AT91C_US_STPBRK           (0x1 << 10) // (USART) Stop Break
+#define AT91C_US_STTTO            (0x1 << 11) // (USART) Start Time-out
+#define AT91C_US_SENDA            (0x1 << 12) // (USART) Send Address
+#define AT91C_US_RSTIT            (0x1 << 13) // (USART) Reset Iterations
+#define AT91C_US_RSTNACK          (0x1 << 14) // (USART) Reset Non Acknowledge
+#define AT91C_US_RETTO            (0x1 << 15) // (USART) Rearm Time-out
+#define AT91C_US_DTREN            (0x1 << 16) // (USART) Data Terminal ready Enable
+#define AT91C_US_DTRDIS           (0x1 << 17) // (USART) Data Terminal ready Disable
+#define AT91C_US_RTSEN            (0x1 << 18) // (USART) Request to Send enable
+#define AT91C_US_RTSDIS           (0x1 << 19) // (USART) Request to Send Disable
+// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- 
+#define AT91C_US_USMODE           (0xF <<  0) // (USART) Usart mode
+#define 	AT91C_US_USMODE_NORMAL               (0x0) // (USART) Normal
+#define 	AT91C_US_USMODE_RS485                (0x1) // (USART) RS485
+#define 	AT91C_US_USMODE_HWHSH                (0x2) // (USART) Hardware Handshaking
+#define 	AT91C_US_USMODE_MODEM                (0x3) // (USART) Modem
+#define 	AT91C_US_USMODE_ISO7816_0            (0x4) // (USART) ISO7816 protocol: T = 0
+#define 	AT91C_US_USMODE_ISO7816_1            (0x6) // (USART) ISO7816 protocol: T = 1
+#define 	AT91C_US_USMODE_IRDA                 (0x8) // (USART) IrDA
+#define 	AT91C_US_USMODE_SWHSH                (0xC) // (USART) Software Handshaking
+#define AT91C_US_CLKS             (0x3 <<  4) // (USART) Clock Selection (Baud Rate generator Input Clock
+#define 	AT91C_US_CLKS_CLOCK                (0x0 <<  4) // (USART) Clock
+#define 	AT91C_US_CLKS_FDIV1                (0x1 <<  4) // (USART) fdiv1
+#define 	AT91C_US_CLKS_SLOW                 (0x2 <<  4) // (USART) slow_clock (ARM)
+#define 	AT91C_US_CLKS_EXT                  (0x3 <<  4) // (USART) External (SCK)
+#define AT91C_US_CHRL             (0x3 <<  6) // (USART) Clock Selection (Baud Rate generator Input Clock
+#define 	AT91C_US_CHRL_5_BITS               (0x0 <<  6) // (USART) Character Length: 5 bits
+#define 	AT91C_US_CHRL_6_BITS               (0x1 <<  6) // (USART) Character Length: 6 bits
+#define 	AT91C_US_CHRL_7_BITS               (0x2 <<  6) // (USART) Character Length: 7 bits
+#define 	AT91C_US_CHRL_8_BITS               (0x3 <<  6) // (USART) Character Length: 8 bits
+#define AT91C_US_SYNC             (0x1 <<  8) // (USART) Synchronous Mode Select
+#define AT91C_US_NBSTOP           (0x3 << 12) // (USART) Number of Stop bits
+#define 	AT91C_US_NBSTOP_1_BIT                (0x0 << 12) // (USART) 1 stop bit
+#define 	AT91C_US_NBSTOP_15_BIT               (0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits
+#define 	AT91C_US_NBSTOP_2_BIT                (0x2 << 12) // (USART) 2 stop bits
+#define AT91C_US_MSBF             (0x1 << 16) // (USART) Bit Order
+#define AT91C_US_MODE9            (0x1 << 17) // (USART) 9-bit Character length
+#define AT91C_US_CKLO             (0x1 << 18) // (USART) Clock Output Select
+#define AT91C_US_OVER             (0x1 << 19) // (USART) Over Sampling Mode
+#define AT91C_US_INACK            (0x1 << 20) // (USART) Inhibit Non Acknowledge
+#define AT91C_US_DSNACK           (0x1 << 21) // (USART) Disable Successive NACK
+#define AT91C_US_MAX_ITER         (0x1 << 24) // (USART) Number of Repetitions
+#define AT91C_US_FILTER           (0x1 << 28) // (USART) Receive Line Filter
+// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
+#define AT91C_US_RXBRK            (0x1 <<  2) // (USART) Break Received/End of Break
+#define AT91C_US_TIMEOUT          (0x1 <<  8) // (USART) Receiver Time-out
+#define AT91C_US_ITERATION        (0x1 << 10) // (USART) Max number of Repetitions Reached
+#define AT91C_US_NACK             (0x1 << 13) // (USART) Non Acknowledge
+#define AT91C_US_RIIC             (0x1 << 16) // (USART) Ring INdicator Input Change Flag
+#define AT91C_US_DSRIC            (0x1 << 17) // (USART) Data Set Ready Input Change Flag
+#define AT91C_US_DCDIC            (0x1 << 18) // (USART) Data Carrier Flag
+#define AT91C_US_CTSIC            (0x1 << 19) // (USART) Clear To Send Input Change Flag
+// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
+// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
+// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- 
+#define AT91C_US_RI               (0x1 << 20) // (USART) Image of RI Input
+#define AT91C_US_DSR              (0x1 << 21) // (USART) Image of DSR Input
+#define AT91C_US_DCD              (0x1 << 22) // (USART) Image of DCD Input
+#define AT91C_US_CTS              (0x1 << 23) // (USART) Image of CTS Input
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Two-wire Interface
+// *****************************************************************************
+// *** Register offset in AT91S_TWI structure ***
+#define TWI_CR          ( 0) // Control Register
+#define TWI_MMR         ( 4) // Master Mode Register
+#define TWI_SMR         ( 8) // Slave Mode Register
+#define TWI_IADR        (12) // Internal Address Register
+#define TWI_CWGR        (16) // Clock Waveform Generator Register
+#define TWI_SR          (32) // Status Register
+#define TWI_IER         (36) // Interrupt Enable Register
+#define TWI_IDR         (40) // Interrupt Disable Register
+#define TWI_IMR         (44) // Interrupt Mask Register
+#define TWI_RHR         (48) // Receive Holding Register
+#define TWI_THR         (52) // Transmit Holding Register
+// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- 
+#define AT91C_TWI_START           (0x1 <<  0) // (TWI) Send a START Condition
+#define AT91C_TWI_STOP            (0x1 <<  1) // (TWI) Send a STOP Condition
+#define AT91C_TWI_MSEN            (0x1 <<  2) // (TWI) TWI Master Transfer Enabled
+#define AT91C_TWI_MSDIS           (0x1 <<  3) // (TWI) TWI Master Transfer Disabled
+#define AT91C_TWI_SVEN            (0x1 <<  4) // (TWI) TWI Slave Transfer Enabled
+#define AT91C_TWI_SVDIS           (0x1 <<  5) // (TWI) TWI Slave Transfer Disabled
+#define AT91C_TWI_SWRST           (0x1 <<  7) // (TWI) Software Reset
+// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- 
+#define AT91C_TWI_IADRSZ          (0x3 <<  8) // (TWI) Internal Device Address Size
+#define 	AT91C_TWI_IADRSZ_NO                   (0x0 <<  8) // (TWI) No internal device address
+#define 	AT91C_TWI_IADRSZ_1_BYTE               (0x1 <<  8) // (TWI) One-byte internal device address
+#define 	AT91C_TWI_IADRSZ_2_BYTE               (0x2 <<  8) // (TWI) Two-byte internal device address
+#define 	AT91C_TWI_IADRSZ_3_BYTE               (0x3 <<  8) // (TWI) Three-byte internal device address
+#define AT91C_TWI_MREAD           (0x1 << 12) // (TWI) Master Read Direction
+#define AT91C_TWI_DADR            (0x7F << 16) // (TWI) Device Address
+// -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- 
+#define AT91C_TWI_SADR            (0x7F << 16) // (TWI) Slave Device Address
+// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- 
+#define AT91C_TWI_CLDIV           (0xFF <<  0) // (TWI) Clock Low Divider
+#define AT91C_TWI_CHDIV           (0xFF <<  8) // (TWI) Clock High Divider
+#define AT91C_TWI_CKDIV           (0x7 << 16) // (TWI) Clock Divider
+// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- 
+#define AT91C_TWI_TXCOMP          (0x1 <<  0) // (TWI) Transmission Completed
+#define AT91C_TWI_RXRDY           (0x1 <<  1) // (TWI) Receive holding register ReaDY
+#define AT91C_TWI_TXRDY           (0x1 <<  2) // (TWI) Transmit holding register ReaDY
+#define AT91C_TWI_SVREAD          (0x1 <<  3) // (TWI) Slave Read
+#define AT91C_TWI_SVACC           (0x1 <<  4) // (TWI) Slave Access
+#define AT91C_TWI_GCACC           (0x1 <<  5) // (TWI) General Call Access
+#define AT91C_TWI_OVRE            (0x1 <<  6) // (TWI) Overrun Error
+#define AT91C_TWI_UNRE            (0x1 <<  7) // (TWI) Underrun Error
+#define AT91C_TWI_NACK            (0x1 <<  8) // (TWI) Not Acknowledged
+#define AT91C_TWI_ARBLST          (0x1 <<  9) // (TWI) Arbitration Lost
+// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- 
+// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- 
+// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Multimedia Card Interface
+// *****************************************************************************
+// *** Register offset in AT91S_MCI structure ***
+#define MCI_CR          ( 0) // MCI Control Register
+#define MCI_MR          ( 4) // MCI Mode Register
+#define MCI_DTOR        ( 8) // MCI Data Timeout Register
+#define MCI_SDCR        (12) // MCI SD Card Register
+#define MCI_ARGR        (16) // MCI Argument Register
+#define MCI_CMDR        (20) // MCI Command Register
+#define MCI_RSPR        (32) // MCI Response Register
+#define MCI_RDR         (48) // MCI Receive Data Register
+#define MCI_TDR         (52) // MCI Transmit Data Register
+#define MCI_SR          (64) // MCI Status Register
+#define MCI_IER         (68) // MCI Interrupt Enable Register
+#define MCI_IDR         (72) // MCI Interrupt Disable Register
+#define MCI_IMR         (76) // MCI Interrupt Mask Register
+#define MCI_RPR         (256) // Receive Pointer Register
+#define MCI_RCR         (260) // Receive Counter Register
+#define MCI_TPR         (264) // Transmit Pointer Register
+#define MCI_TCR         (268) // Transmit Counter Register
+#define MCI_RNPR        (272) // Receive Next Pointer Register
+#define MCI_RNCR        (276) // Receive Next Counter Register
+#define MCI_TNPR        (280) // Transmit Next Pointer Register
+#define MCI_TNCR        (284) // Transmit Next Counter Register
+#define MCI_PTCR        (288) // PDC Transfer Control Register
+#define MCI_PTSR        (292) // PDC Transfer Status Register
+// -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- 
+#define AT91C_MCI_MCIEN           (0x1 <<  0) // (MCI) Multimedia Interface Enable
+#define AT91C_MCI_MCIDIS          (0x1 <<  1) // (MCI) Multimedia Interface Disable
+#define AT91C_MCI_PWSEN           (0x1 <<  2) // (MCI) Power Save Mode Enable
+#define AT91C_MCI_PWSDIS          (0x1 <<  3) // (MCI) Power Save Mode Disable
+// -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- 
+#define AT91C_MCI_CLKDIV          (0x1 <<  0) // (MCI) Clock Divider
+#define AT91C_MCI_PWSDIV          (0x1 <<  8) // (MCI) Power Saving Divider
+#define AT91C_MCI_PDCPADV         (0x1 << 14) // (MCI) PDC Padding Value
+#define AT91C_MCI_PDCMODE         (0x1 << 15) // (MCI) PDC Oriented Mode
+#define AT91C_MCI_BLKLEN          (0x1 << 18) // (MCI) Data Block Length
+// -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- 
+#define AT91C_MCI_DTOCYC          (0x1 <<  0) // (MCI) Data Timeout Cycle Number
+#define AT91C_MCI_DTOMUL          (0x7 <<  4) // (MCI) Data Timeout Multiplier
+#define 	AT91C_MCI_DTOMUL_1                    (0x0 <<  4) // (MCI) DTOCYC x 1
+#define 	AT91C_MCI_DTOMUL_16                   (0x1 <<  4) // (MCI) DTOCYC x 16
+#define 	AT91C_MCI_DTOMUL_128                  (0x2 <<  4) // (MCI) DTOCYC x 128
+#define 	AT91C_MCI_DTOMUL_256                  (0x3 <<  4) // (MCI) DTOCYC x 256
+#define 	AT91C_MCI_DTOMUL_1024                 (0x4 <<  4) // (MCI) DTOCYC x 1024
+#define 	AT91C_MCI_DTOMUL_4096                 (0x5 <<  4) // (MCI) DTOCYC x 4096
+#define 	AT91C_MCI_DTOMUL_65536                (0x6 <<  4) // (MCI) DTOCYC x 65536
+#define 	AT91C_MCI_DTOMUL_1048576              (0x7 <<  4) // (MCI) DTOCYC x 1048576
+// -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- 
+#define AT91C_MCI_SCDSEL          (0x1 <<  0) // (MCI) SD Card Selector
+#define AT91C_MCI_SCDBUS          (0x1 <<  7) // (MCI) SD Card Bus Width
+// -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- 
+#define AT91C_MCI_CMDNB           (0x1F <<  0) // (MCI) Command Number
+#define AT91C_MCI_RSPTYP          (0x3 <<  6) // (MCI) Response Type
+#define 	AT91C_MCI_RSPTYP_NO                   (0x0 <<  6) // (MCI) No response
+#define 	AT91C_MCI_RSPTYP_48                   (0x1 <<  6) // (MCI) 48-bit response
+#define 	AT91C_MCI_RSPTYP_136                  (0x2 <<  6) // (MCI) 136-bit response
+#define AT91C_MCI_SPCMD           (0x7 <<  8) // (MCI) Special CMD
+#define 	AT91C_MCI_SPCMD_NONE                 (0x0 <<  8) // (MCI) Not a special CMD
+#define 	AT91C_MCI_SPCMD_INIT                 (0x1 <<  8) // (MCI) Initialization CMD
+#define 	AT91C_MCI_SPCMD_SYNC                 (0x2 <<  8) // (MCI) Synchronized CMD
+#define 	AT91C_MCI_SPCMD_IT_CMD               (0x4 <<  8) // (MCI) Interrupt command
+#define 	AT91C_MCI_SPCMD_IT_REP               (0x5 <<  8) // (MCI) Interrupt response
+#define AT91C_MCI_OPDCMD          (0x1 << 11) // (MCI) Open Drain Command
+#define AT91C_MCI_MAXLAT          (0x1 << 12) // (MCI) Maximum Latency for Command to respond
+#define AT91C_MCI_TRCMD           (0x3 << 16) // (MCI) Transfer CMD
+#define 	AT91C_MCI_TRCMD_NO                   (0x0 << 16) // (MCI) No transfer
+#define 	AT91C_MCI_TRCMD_START                (0x1 << 16) // (MCI) Start transfer
+#define 	AT91C_MCI_TRCMD_STOP                 (0x2 << 16) // (MCI) Stop transfer
+#define AT91C_MCI_TRDIR           (0x1 << 18) // (MCI) Transfer Direction
+#define AT91C_MCI_TRTYP           (0x3 << 19) // (MCI) Transfer Type
+#define 	AT91C_MCI_TRTYP_BLOCK                (0x0 << 19) // (MCI) Block Transfer type
+#define 	AT91C_MCI_TRTYP_MULTIPLE             (0x1 << 19) // (MCI) Multiple Block transfer type
+#define 	AT91C_MCI_TRTYP_STREAM               (0x2 << 19) // (MCI) Stream transfer type
+// -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- 
+#define AT91C_MCI_CMDRDY          (0x1 <<  0) // (MCI) Command Ready flag
+#define AT91C_MCI_RXRDY           (0x1 <<  1) // (MCI) RX Ready flag
+#define AT91C_MCI_TXRDY           (0x1 <<  2) // (MCI) TX Ready flag
+#define AT91C_MCI_BLKE            (0x1 <<  3) // (MCI) Data Block Transfer Ended flag
+#define AT91C_MCI_DTIP            (0x1 <<  4) // (MCI) Data Transfer in Progress flag
+#define AT91C_MCI_NOTBUSY         (0x1 <<  5) // (MCI) Data Line Not Busy flag
+#define AT91C_MCI_ENDRX           (0x1 <<  6) // (MCI) End of RX Buffer flag
+#define AT91C_MCI_ENDTX           (0x1 <<  7) // (MCI) End of TX Buffer flag
+#define AT91C_MCI_RXBUFF          (0x1 << 14) // (MCI) RX Buffer Full flag
+#define AT91C_MCI_TXBUFE          (0x1 << 15) // (MCI) TX Buffer Empty flag
+#define AT91C_MCI_RINDE           (0x1 << 16) // (MCI) Response Index Error flag
+#define AT91C_MCI_RDIRE           (0x1 << 17) // (MCI) Response Direction Error flag
+#define AT91C_MCI_RCRCE           (0x1 << 18) // (MCI) Response CRC Error flag
+#define AT91C_MCI_RENDE           (0x1 << 19) // (MCI) Response End Bit Error flag
+#define AT91C_MCI_RTOE            (0x1 << 20) // (MCI) Response Time-out Error flag
+#define AT91C_MCI_DCRCE           (0x1 << 21) // (MCI) data CRC Error flag
+#define AT91C_MCI_DTOE            (0x1 << 22) // (MCI) Data timeout Error flag
+#define AT91C_MCI_OVRE            (0x1 << 30) // (MCI) Overrun flag
+#define AT91C_MCI_UNRE            (0x1 << 31) // (MCI) Underrun flag
+// -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- 
+// -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- 
+// -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR USB Device Interface
+// *****************************************************************************
+// *** Register offset in AT91S_UDP structure ***
+#define UDP_NUM         ( 0) // Frame Number Register
+#define UDP_GLBSTATE    ( 4) // Global State Register
+#define UDP_FADDR       ( 8) // Function Address Register
+#define UDP_IER         (16) // Interrupt Enable Register
+#define UDP_IDR         (20) // Interrupt Disable Register
+#define UDP_IMR         (24) // Interrupt Mask Register
+#define UDP_ISR         (28) // Interrupt Status Register
+#define UDP_ICR         (32) // Interrupt Clear Register
+#define UDP_RSTEP       (40) // Reset Endpoint Register
+#define UDP_CSR         (48) // Endpoint Control and Status Register
+#define UDP_FDR         (80) // Endpoint FIFO Data Register
+// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- 
+#define AT91C_UDP_FRM_NUM         (0x7FF <<  0) // (UDP) Frame Number as Defined in the Packet Field Formats
+#define AT91C_UDP_FRM_ERR         (0x1 << 16) // (UDP) Frame Error
+#define AT91C_UDP_FRM_OK          (0x1 << 17) // (UDP) Frame OK
+// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- 
+#define AT91C_UDP_FADDEN          (0x1 <<  0) // (UDP) Function Address Enable
+#define AT91C_UDP_CONFG           (0x1 <<  1) // (UDP) Configured
+#define AT91C_UDP_RMWUPE          (0x1 <<  2) // (UDP) Remote Wake Up Enable
+#define AT91C_UDP_RSMINPR         (0x1 <<  3) // (UDP) A Resume Has Been Sent to the Host
+// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- 
+#define AT91C_UDP_FADD            (0xFF <<  0) // (UDP) Function Address Value
+#define AT91C_UDP_FEN             (0x1 <<  8) // (UDP) Function Enable
+// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- 
+#define AT91C_UDP_EPINT0          (0x1 <<  0) // (UDP) Endpoint 0 Interrupt
+#define AT91C_UDP_EPINT1          (0x1 <<  1) // (UDP) Endpoint 0 Interrupt
+#define AT91C_UDP_EPINT2          (0x1 <<  2) // (UDP) Endpoint 2 Interrupt
+#define AT91C_UDP_EPINT3          (0x1 <<  3) // (UDP) Endpoint 3 Interrupt
+#define AT91C_UDP_EPINT4          (0x1 <<  4) // (UDP) Endpoint 4 Interrupt
+#define AT91C_UDP_EPINT5          (0x1 <<  5) // (UDP) Endpoint 5 Interrupt
+#define AT91C_UDP_EPINT6          (0x1 <<  6) // (UDP) Endpoint 6 Interrupt
+#define AT91C_UDP_EPINT7          (0x1 <<  7) // (UDP) Endpoint 7 Interrupt
+#define AT91C_UDP_RXSUSP          (0x1 <<  8) // (UDP) USB Suspend Interrupt
+#define AT91C_UDP_RXRSM           (0x1 <<  9) // (UDP) USB Resume Interrupt
+#define AT91C_UDP_EXTRSM          (0x1 << 10) // (UDP) USB External Resume Interrupt
+#define AT91C_UDP_SOFINT          (0x1 << 11) // (UDP) USB Start Of frame Interrupt
+#define AT91C_UDP_WAKEUP          (0x1 << 13) // (UDP) USB Resume Interrupt
+// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- 
+// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- 
+// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- 
+#define AT91C_UDP_ENDBUSRES       (0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt
+// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- 
+// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- 
+#define AT91C_UDP_EP0             (0x1 <<  0) // (UDP) Reset Endpoint 0
+#define AT91C_UDP_EP1             (0x1 <<  1) // (UDP) Reset Endpoint 1
+#define AT91C_UDP_EP2             (0x1 <<  2) // (UDP) Reset Endpoint 2
+#define AT91C_UDP_EP3             (0x1 <<  3) // (UDP) Reset Endpoint 3
+#define AT91C_UDP_EP4             (0x1 <<  4) // (UDP) Reset Endpoint 4
+#define AT91C_UDP_EP5             (0x1 <<  5) // (UDP) Reset Endpoint 5
+#define AT91C_UDP_EP6             (0x1 <<  6) // (UDP) Reset Endpoint 6
+#define AT91C_UDP_EP7             (0x1 <<  7) // (UDP) Reset Endpoint 7
+// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- 
+#define AT91C_UDP_TXCOMP          (0x1 <<  0) // (UDP) Generates an IN packet with data previously written in the DPR
+#define AT91C_UDP_RX_DATA_BK0     (0x1 <<  1) // (UDP) Receive Data Bank 0
+#define AT91C_UDP_RXSETUP         (0x1 <<  2) // (UDP) Sends STALL to the Host (Control endpoints)
+#define AT91C_UDP_ISOERROR        (0x1 <<  3) // (UDP) Isochronous error (Isochronous endpoints)
+#define AT91C_UDP_TXPKTRDY        (0x1 <<  4) // (UDP) Transmit Packet Ready
+#define AT91C_UDP_FORCESTALL      (0x1 <<  5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints).
+#define AT91C_UDP_RX_DATA_BK1     (0x1 <<  6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes).
+#define AT91C_UDP_DIR             (0x1 <<  7) // (UDP) Transfer Direction
+#define AT91C_UDP_EPTYPE          (0x7 <<  8) // (UDP) Endpoint type
+#define 	AT91C_UDP_EPTYPE_CTRL                 (0x0 <<  8) // (UDP) Control
+#define 	AT91C_UDP_EPTYPE_ISO_OUT              (0x1 <<  8) // (UDP) Isochronous OUT
+#define 	AT91C_UDP_EPTYPE_BULK_OUT             (0x2 <<  8) // (UDP) Bulk OUT
+#define 	AT91C_UDP_EPTYPE_INT_OUT              (0x3 <<  8) // (UDP) Interrupt OUT
+#define 	AT91C_UDP_EPTYPE_ISO_IN               (0x5 <<  8) // (UDP) Isochronous IN
+#define 	AT91C_UDP_EPTYPE_BULK_IN              (0x6 <<  8) // (UDP) Bulk IN
+#define 	AT91C_UDP_EPTYPE_INT_IN               (0x7 <<  8) // (UDP) Interrupt IN
+#define AT91C_UDP_DTGLE           (0x1 << 11) // (UDP) Data Toggle
+#define AT91C_UDP_EPEDS           (0x1 << 15) // (UDP) Endpoint Enable Disable
+#define AT91C_UDP_RXBYTECNT       (0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface
+// *****************************************************************************
+// *** Register offset in AT91S_TC structure ***
+#define TC_CCR          ( 0) // Channel Control Register
+#define TC_CMR          ( 4) // Channel Mode Register
+#define TC_CV           (16) // Counter Value
+#define TC_RA           (20) // Register A
+#define TC_RB           (24) // Register B
+#define TC_RC           (28) // Register C
+#define TC_SR           (32) // Status Register
+#define TC_IER          (36) // Interrupt Enable Register
+#define TC_IDR          (40) // Interrupt Disable Register
+#define TC_IMR          (44) // Interrupt Mask Register
+// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- 
+#define AT91C_TC_CLKEN            (0x1 <<  0) // (TC) Counter Clock Enable Command
+#define AT91C_TC_CLKDIS           (0x1 <<  1) // (TC) Counter Clock Disable Command
+#define AT91C_TC_SWTRG            (0x1 <<  2) // (TC) Software Trigger Command
+// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- 
+#define AT91C_TC_CPCSTOP          (0x1 <<  6) // (TC) Counter Clock Stopped with RC Compare
+#define AT91C_TC_CPCDIS           (0x1 <<  7) // (TC) Counter Clock Disable with RC Compare
+#define AT91C_TC_EEVTEDG          (0x3 <<  8) // (TC) External Event Edge Selection
+#define 	AT91C_TC_EEVTEDG_NONE                 (0x0 <<  8) // (TC) Edge: None
+#define 	AT91C_TC_EEVTEDG_RISING               (0x1 <<  8) // (TC) Edge: rising edge
+#define 	AT91C_TC_EEVTEDG_FALLING              (0x2 <<  8) // (TC) Edge: falling edge
+#define 	AT91C_TC_EEVTEDG_BOTH                 (0x3 <<  8) // (TC) Edge: each edge
+#define AT91C_TC_EEVT             (0x3 << 10) // (TC) External Event  Selection
+#define 	AT91C_TC_EEVT_NONE                 (0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input
+#define 	AT91C_TC_EEVT_RISING               (0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output
+#define 	AT91C_TC_EEVT_FALLING              (0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output
+#define 	AT91C_TC_EEVT_BOTH                 (0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output
+#define AT91C_TC_ENETRG           (0x1 << 12) // (TC) External Event Trigger enable
+#define AT91C_TC_WAVESEL          (0x3 << 13) // (TC) Waveform  Selection
+#define 	AT91C_TC_WAVESEL_UP                   (0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UPDOWN               (0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UP_AUTO              (0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UPDOWN_AUTO          (0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare
+#define AT91C_TC_CPCTRG           (0x1 << 14) // (TC) RC Compare Trigger Enable
+#define AT91C_TC_WAVE             (0x1 << 15) // (TC) 
+#define AT91C_TC_ACPA             (0x3 << 16) // (TC) RA Compare Effect on TIOA
+#define 	AT91C_TC_ACPA_NONE                 (0x0 << 16) // (TC) Effect: none
+#define 	AT91C_TC_ACPA_SET                  (0x1 << 16) // (TC) Effect: set
+#define 	AT91C_TC_ACPA_CLEAR                (0x2 << 16) // (TC) Effect: clear
+#define 	AT91C_TC_ACPA_TOGGLE               (0x3 << 16) // (TC) Effect: toggle
+#define AT91C_TC_ACPC             (0x3 << 18) // (TC) RC Compare Effect on TIOA
+#define 	AT91C_TC_ACPC_NONE                 (0x0 << 18) // (TC) Effect: none
+#define 	AT91C_TC_ACPC_SET                  (0x1 << 18) // (TC) Effect: set
+#define 	AT91C_TC_ACPC_CLEAR                (0x2 << 18) // (TC) Effect: clear
+#define 	AT91C_TC_ACPC_TOGGLE               (0x3 << 18) // (TC) Effect: toggle
+#define AT91C_TC_AEEVT            (0x3 << 20) // (TC) External Event Effect on TIOA
+#define 	AT91C_TC_AEEVT_NONE                 (0x0 << 20) // (TC) Effect: none
+#define 	AT91C_TC_AEEVT_SET                  (0x1 << 20) // (TC) Effect: set
+#define 	AT91C_TC_AEEVT_CLEAR                (0x2 << 20) // (TC) Effect: clear
+#define 	AT91C_TC_AEEVT_TOGGLE               (0x3 << 20) // (TC) Effect: toggle
+#define AT91C_TC_ASWTRG           (0x3 << 22) // (TC) Software Trigger Effect on TIOA
+#define 	AT91C_TC_ASWTRG_NONE                 (0x0 << 22) // (TC) Effect: none
+#define 	AT91C_TC_ASWTRG_SET                  (0x1 << 22) // (TC) Effect: set
+#define 	AT91C_TC_ASWTRG_CLEAR                (0x2 << 22) // (TC) Effect: clear
+#define 	AT91C_TC_ASWTRG_TOGGLE               (0x3 << 22) // (TC) Effect: toggle
+#define AT91C_TC_BCPB             (0x3 << 24) // (TC) RB Compare Effect on TIOB
+#define 	AT91C_TC_BCPB_NONE                 (0x0 << 24) // (TC) Effect: none
+#define 	AT91C_TC_BCPB_SET                  (0x1 << 24) // (TC) Effect: set
+#define 	AT91C_TC_BCPB_CLEAR                (0x2 << 24) // (TC) Effect: clear
+#define 	AT91C_TC_BCPB_TOGGLE               (0x3 << 24) // (TC) Effect: toggle
+#define AT91C_TC_BCPC             (0x3 << 26) // (TC) RC Compare Effect on TIOB
+#define 	AT91C_TC_BCPC_NONE                 (0x0 << 26) // (TC) Effect: none
+#define 	AT91C_TC_BCPC_SET                  (0x1 << 26) // (TC) Effect: set
+#define 	AT91C_TC_BCPC_CLEAR                (0x2 << 26) // (TC) Effect: clear
+#define 	AT91C_TC_BCPC_TOGGLE               (0x3 << 26) // (TC) Effect: toggle
+#define AT91C_TC_BEEVT            (0x3 << 28) // (TC) External Event Effect on TIOB
+#define 	AT91C_TC_BEEVT_NONE                 (0x0 << 28) // (TC) Effect: none
+#define 	AT91C_TC_BEEVT_SET                  (0x1 << 28) // (TC) Effect: set
+#define 	AT91C_TC_BEEVT_CLEAR                (0x2 << 28) // (TC) Effect: clear
+#define 	AT91C_TC_BEEVT_TOGGLE               (0x3 << 28) // (TC) Effect: toggle
+#define AT91C_TC_BSWTRG           (0x3 << 30) // (TC) Software Trigger Effect on TIOB
+#define 	AT91C_TC_BSWTRG_NONE                 (0x0 << 30) // (TC) Effect: none
+#define 	AT91C_TC_BSWTRG_SET                  (0x1 << 30) // (TC) Effect: set
+#define 	AT91C_TC_BSWTRG_CLEAR                (0x2 << 30) // (TC) Effect: clear
+#define 	AT91C_TC_BSWTRG_TOGGLE               (0x3 << 30) // (TC) Effect: toggle
+// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- 
+#define AT91C_TC_COVFS            (0x1 <<  0) // (TC) Counter Overflow
+#define AT91C_TC_LOVRS            (0x1 <<  1) // (TC) Load Overrun
+#define AT91C_TC_CPAS             (0x1 <<  2) // (TC) RA Compare
+#define AT91C_TC_CPBS             (0x1 <<  3) // (TC) RB Compare
+#define AT91C_TC_CPCS             (0x1 <<  4) // (TC) RC Compare
+#define AT91C_TC_LDRAS            (0x1 <<  5) // (TC) RA Loading
+#define AT91C_TC_LDRBS            (0x1 <<  6) // (TC) RB Loading
+#define AT91C_TC_ETRCS            (0x1 <<  7) // (TC) External Trigger
+#define AT91C_TC_ETRGS            (0x1 << 16) // (TC) Clock Enabling
+#define AT91C_TC_MTIOA            (0x1 << 17) // (TC) TIOA Mirror
+#define AT91C_TC_MTIOB            (0x1 << 18) // (TC) TIOA Mirror
+// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- 
+// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- 
+// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Timer Counter Interface
+// *****************************************************************************
+// *** Register offset in AT91S_TCB structure ***
+#define TCB_TC0         ( 0) // TC Channel 0
+#define TCB_TC1         (64) // TC Channel 1
+#define TCB_TC2         (128) // TC Channel 2
+#define TCB_BCR         (192) // TC Block Control Register
+#define TCB_BMR         (196) // TC Block Mode Register
+// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- 
+#define AT91C_TCB_SYNC            (0x1 <<  0) // (TCB) Synchro Command
+// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- 
+#define AT91C_TCB_TC0XC0S         (0x1 <<  0) // (TCB) External Clock Signal 0 Selection
+#define 	AT91C_TCB_TC0XC0S_TCLK0                (0x0) // (TCB) TCLK0 connected to XC0
+#define 	AT91C_TCB_TC0XC0S_NONE                 (0x1) // (TCB) None signal connected to XC0
+#define 	AT91C_TCB_TC0XC0S_TIOA1                (0x2) // (TCB) TIOA1 connected to XC0
+#define 	AT91C_TCB_TC0XC0S_TIOA2                (0x3) // (TCB) TIOA2 connected to XC0
+#define AT91C_TCB_TC1XC1S         (0x1 <<  2) // (TCB) External Clock Signal 1 Selection
+#define 	AT91C_TCB_TC1XC1S_TCLK1                (0x0 <<  2) // (TCB) TCLK1 connected to XC1
+#define 	AT91C_TCB_TC1XC1S_NONE                 (0x1 <<  2) // (TCB) None signal connected to XC1
+#define 	AT91C_TCB_TC1XC1S_TIOA0                (0x2 <<  2) // (TCB) TIOA0 connected to XC1
+#define 	AT91C_TCB_TC1XC1S_TIOA2                (0x3 <<  2) // (TCB) TIOA2 connected to XC1
+#define AT91C_TCB_TC2XC2S         (0x1 <<  4) // (TCB) External Clock Signal 2 Selection
+#define 	AT91C_TCB_TC2XC2S_TCLK2                (0x0 <<  4) // (TCB) TCLK2 connected to XC2
+#define 	AT91C_TCB_TC2XC2S_NONE                 (0x1 <<  4) // (TCB) None signal connected to XC2
+#define 	AT91C_TCB_TC2XC2S_TIOA0                (0x2 <<  4) // (TCB) TIOA0 connected to XC2
+#define 	AT91C_TCB_TC2XC2S_TIOA2                (0x3 <<  4) // (TCB) TIOA2 connected to XC2
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR USB Host Interface
+// *****************************************************************************
+// *** Register offset in AT91S_UHP structure ***
+#define UHP_HcRevision  ( 0) // Revision
+#define UHP_HcControl   ( 4) // Operating modes for the Host Controller
+#define UHP_HcCommandStatus ( 8) // Command & status Register
+#define UHP_HcInterruptStatus (12) // Interrupt Status Register
+#define UHP_HcInterruptEnable (16) // Interrupt Enable Register
+#define UHP_HcInterruptDisable (20) // Interrupt Disable Register
+#define UHP_HcHCCA      (24) // Pointer to the Host Controller Communication Area
+#define UHP_HcPeriodCurrentED (28) // Current Isochronous or Interrupt Endpoint Descriptor
+#define UHP_HcControlHeadED (32) // First Endpoint Descriptor of the Control list
+#define UHP_HcControlCurrentED (36) // Endpoint Control and Status Register
+#define UHP_HcBulkHeadED (40) // First endpoint register of the Bulk list
+#define UHP_HcBulkCurrentED (44) // Current endpoint of the Bulk list
+#define UHP_HcBulkDoneHead (48) // Last completed transfer descriptor
+#define UHP_HcFmInterval (52) // Bit time between 2 consecutive SOFs
+#define UHP_HcFmRemaining (56) // Bit time remaining in the current Frame
+#define UHP_HcFmNumber  (60) // Frame number
+#define UHP_HcPeriodicStart (64) // Periodic Start
+#define UHP_HcLSThreshold (68) // LS Threshold
+#define UHP_HcRhDescriptorA (72) // Root Hub characteristics A
+#define UHP_HcRhDescriptorB (76) // Root Hub characteristics B
+#define UHP_HcRhStatus  (80) // Root Hub Status register
+#define UHP_HcRhPortStatus (84) // Root Hub Port Status Register
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Ethernet MAC
+// *****************************************************************************
+// *** Register offset in AT91S_EMAC structure ***
+#define EMAC_CTL        ( 0) // Network Control Register
+#define EMAC_CFG        ( 4) // Network Configuration Register
+#define EMAC_SR         ( 8) // Network Status Register
+#define EMAC_TAR        (12) // Transmit Address Register
+#define EMAC_TCR        (16) // Transmit Control Register
+#define EMAC_TSR        (20) // Transmit Status Register
+#define EMAC_RBQP       (24) // Receive Buffer Queue Pointer
+#define EMAC_RSR        (32) // Receive Status Register
+#define EMAC_ISR        (36) // Interrupt Status Register
+#define EMAC_IER        (40) // Interrupt Enable Register
+#define EMAC_IDR        (44) // Interrupt Disable Register
+#define EMAC_IMR        (48) // Interrupt Mask Register
+#define EMAC_MAN        (52) // PHY Maintenance Register
+#define EMAC_FRA        (64) // Frames Transmitted OK Register
+#define EMAC_SCOL       (68) // Single Collision Frame Register
+#define EMAC_MCOL       (72) // Multiple Collision Frame Register
+#define EMAC_OK         (76) // Frames Received OK Register
+#define EMAC_SEQE       (80) // Frame Check Sequence Error Register
+#define EMAC_ALE        (84) // Alignment Error Register
+#define EMAC_DTE        (88) // Deferred Transmission Frame Register
+#define EMAC_LCOL       (92) // Late Collision Register
+#define EMAC_ECOL       (96) // Excessive Collision Register
+#define EMAC_CSE        (100) // Carrier Sense Error Register
+#define EMAC_TUE        (104) // Transmit Underrun Error Register
+#define EMAC_CDE        (108) // Code Error Register
+#define EMAC_ELR        (112) // Excessive Length Error Register
+#define EMAC_RJB        (116) // Receive Jabber Register
+#define EMAC_USF        (120) // Undersize Frame Register
+#define EMAC_SQEE       (124) // SQE Test Error Register
+#define EMAC_DRFC       (128) // Discarded RX Frame Register
+#define EMAC_HSH        (144) // Hash Address High[63:32]
+#define EMAC_HSL        (148) // Hash Address Low[31:0]
+#define EMAC_SA1L       (152) // Specific Address 1 Low, First 4 bytes
+#define EMAC_SA1H       (156) // Specific Address 1 High, Last 2 bytes
+#define EMAC_SA2L       (160) // Specific Address 2 Low, First 4 bytes
+#define EMAC_SA2H       (164) // Specific Address 2 High, Last 2 bytes
+#define EMAC_SA3L       (168) // Specific Address 3 Low, First 4 bytes
+#define EMAC_SA3H       (172) // Specific Address 3 High, Last 2 bytes
+#define EMAC_SA4L       (176) // Specific Address 4 Low, First 4 bytes
+#define EMAC_SA4H       (180) // Specific Address 4 High, Last 2 bytesr
+// -------- EMAC_CTL : (EMAC Offset: 0x0)  -------- 
+#define AT91C_EMAC_LB             (0x1 <<  0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level.
+#define AT91C_EMAC_LBL            (0x1 <<  1) // (EMAC) Loopback local. 
+#define AT91C_EMAC_RE             (0x1 <<  2) // (EMAC) Receive enable. 
+#define AT91C_EMAC_TE             (0x1 <<  3) // (EMAC) Transmit enable. 
+#define AT91C_EMAC_MPE            (0x1 <<  4) // (EMAC) Management port enable. 
+#define AT91C_EMAC_CSR            (0x1 <<  5) // (EMAC) Clear statistics registers. 
+#define AT91C_EMAC_ISR            (0x1 <<  6) // (EMAC) Increment statistics registers. 
+#define AT91C_EMAC_WES            (0x1 <<  7) // (EMAC) Write enable for statistics registers. 
+#define AT91C_EMAC_BP             (0x1 <<  8) // (EMAC) Back pressure. 
+// -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- 
+#define AT91C_EMAC_SPD            (0x1 <<  0) // (EMAC) Speed. 
+#define AT91C_EMAC_FD             (0x1 <<  1) // (EMAC) Full duplex. 
+#define AT91C_EMAC_BR             (0x1 <<  2) // (EMAC) Bit rate. 
+#define AT91C_EMAC_CAF            (0x1 <<  4) // (EMAC) Copy all frames. 
+#define AT91C_EMAC_NBC            (0x1 <<  5) // (EMAC) No broadcast. 
+#define AT91C_EMAC_MTI            (0x1 <<  6) // (EMAC) Multicast hash enable
+#define AT91C_EMAC_UNI            (0x1 <<  7) // (EMAC) Unicast hash enable. 
+#define AT91C_EMAC_BIG            (0x1 <<  8) // (EMAC) Receive 1522 bytes. 
+#define AT91C_EMAC_EAE            (0x1 <<  9) // (EMAC) External address match enable. 
+#define AT91C_EMAC_CLK            (0x3 << 10) // (EMAC) 
+#define 	AT91C_EMAC_CLK_HCLK_8               (0x0 << 10) // (EMAC) HCLK divided by 8
+#define 	AT91C_EMAC_CLK_HCLK_16              (0x1 << 10) // (EMAC) HCLK divided by 16
+#define 	AT91C_EMAC_CLK_HCLK_32              (0x2 << 10) // (EMAC) HCLK divided by 32
+#define 	AT91C_EMAC_CLK_HCLK_64              (0x3 << 10) // (EMAC) HCLK divided by 64
+#define AT91C_EMAC_RTY            (0x1 << 12) // (EMAC) 
+#define AT91C_EMAC_RMII           (0x1 << 13) // (EMAC) 
+// -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- 
+#define AT91C_EMAC_MDIO           (0x1 <<  1) // (EMAC) 
+#define AT91C_EMAC_IDLE           (0x1 <<  2) // (EMAC) 
+// -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- 
+#define AT91C_EMAC_LEN            (0x7FF <<  0) // (EMAC) 
+#define AT91C_EMAC_NCRC           (0x1 << 15) // (EMAC) 
+// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- 
+#define AT91C_EMAC_OVR            (0x1 <<  0) // (EMAC) 
+#define AT91C_EMAC_COL            (0x1 <<  1) // (EMAC) 
+#define AT91C_EMAC_RLE            (0x1 <<  2) // (EMAC) 
+#define AT91C_EMAC_TXIDLE         (0x1 <<  3) // (EMAC) 
+#define AT91C_EMAC_BNQ            (0x1 <<  4) // (EMAC) 
+#define AT91C_EMAC_COMP           (0x1 <<  5) // (EMAC) 
+#define AT91C_EMAC_UND            (0x1 <<  6) // (EMAC) 
+// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- 
+#define AT91C_EMAC_BNA            (0x1 <<  0) // (EMAC) 
+#define AT91C_EMAC_REC            (0x1 <<  1) // (EMAC) 
+// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- 
+#define AT91C_EMAC_DONE           (0x1 <<  0) // (EMAC) 
+#define AT91C_EMAC_RCOM           (0x1 <<  1) // (EMAC) 
+#define AT91C_EMAC_RBNA           (0x1 <<  2) // (EMAC) 
+#define AT91C_EMAC_TOVR           (0x1 <<  3) // (EMAC) 
+#define AT91C_EMAC_TUND           (0x1 <<  4) // (EMAC) 
+#define AT91C_EMAC_RTRY           (0x1 <<  5) // (EMAC) 
+#define AT91C_EMAC_TBRE           (0x1 <<  6) // (EMAC) 
+#define AT91C_EMAC_TCOM           (0x1 <<  7) // (EMAC) 
+#define AT91C_EMAC_TIDLE          (0x1 <<  8) // (EMAC) 
+#define AT91C_EMAC_LINK           (0x1 <<  9) // (EMAC) 
+#define AT91C_EMAC_ROVR           (0x1 << 10) // (EMAC) 
+#define AT91C_EMAC_HRESP          (0x1 << 11) // (EMAC) 
+// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- 
+// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- 
+// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- 
+// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- 
+#define AT91C_EMAC_DATA           (0xFFFF <<  0) // (EMAC) 
+#define AT91C_EMAC_CODE           (0x3 << 16) // (EMAC) 
+#define AT91C_EMAC_REGA           (0x1F << 18) // (EMAC) 
+#define AT91C_EMAC_PHYA           (0x1F << 23) // (EMAC) 
+#define AT91C_EMAC_RW             (0x3 << 28) // (EMAC) 
+#define AT91C_EMAC_HIGH           (0x1 << 30) // (EMAC) 
+#define AT91C_EMAC_LOW            (0x1 << 31) // (EMAC) 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR External Bus Interface
+// *****************************************************************************
+// *** Register offset in AT91S_EBI structure ***
+#define EBI_CSA         ( 0) // Chip Select Assignment Register
+#define EBI_CFGR        ( 4) // Configuration Register
+// -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- 
+#define AT91C_EBI_CS0A            (0x1 <<  0) // (EBI) Chip Select 0 Assignment
+#define 	AT91C_EBI_CS0A_SMC                  (0x0) // (EBI) Chip Select 0 is assigned to the Static Memory Controller.
+#define 	AT91C_EBI_CS0A_BFC                  (0x1) // (EBI) Chip Select 0 is assigned to the Burst Flash Controller.
+#define AT91C_EBI_CS1A            (0x1 <<  1) // (EBI) Chip Select 1 Assignment
+#define 	AT91C_EBI_CS1A_SMC                  (0x0 <<  1) // (EBI) Chip Select 1 is assigned to the Static Memory Controller.
+#define 	AT91C_EBI_CS1A_SDRAMC               (0x1 <<  1) // (EBI) Chip Select 1 is assigned to the SDRAM Controller.
+#define AT91C_EBI_CS3A            (0x1 <<  3) // (EBI) Chip Select 3 Assignment
+#define 	AT91C_EBI_CS3A_SMC                  (0x0 <<  3) // (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2.
+#define 	AT91C_EBI_CS3A_SMC_SmartMedia       (0x1 <<  3) // (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated.
+#define AT91C_EBI_CS4A            (0x1 <<  4) // (EBI) Chip Select 4 Assignment
+#define 	AT91C_EBI_CS4A_SMC                  (0x0 <<  4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2.
+#define 	AT91C_EBI_CS4A_SMC_CompactFlash     (0x1 <<  4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated.
+// -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- 
+#define AT91C_EBI_DBPUC           (0x1 <<  0) // (EBI) Data Bus Pull-Up Configuration
+#define AT91C_EBI_EBSEN           (0x1 <<  1) // (EBI) Bus Sharing Enable
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Static Memory Controller 2 Interface
+// *****************************************************************************
+// *** Register offset in AT91S_SMC2 structure ***
+#define SMC2_CSR        ( 0) // SMC2 Chip Select Register
+// -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- 
+#define AT91C_SMC2_NWS            (0x7F <<  0) // (SMC2) Number of Wait States
+#define AT91C_SMC2_WSEN           (0x1 <<  7) // (SMC2) Wait State Enable
+#define AT91C_SMC2_TDF            (0xF <<  8) // (SMC2) Data Float Time
+#define AT91C_SMC2_BAT            (0x1 << 12) // (SMC2) Byte Access Type
+#define AT91C_SMC2_DBW            (0x1 << 13) // (SMC2) Data Bus Width
+#define 	AT91C_SMC2_DBW_16                   (0x1 << 13) // (SMC2) 16-bit.
+#define 	AT91C_SMC2_DBW_8                    (0x2 << 13) // (SMC2) 8-bit.
+#define AT91C_SMC2_DRP            (0x1 << 15) // (SMC2) Data Read Protocol
+#define AT91C_SMC2_ACSS           (0x3 << 16) // (SMC2) Address to Chip Select Setup
+#define 	AT91C_SMC2_ACSS_STANDARD             (0x0 << 16) // (SMC2) Standard, asserted at the beginning of the access and deasserted at the end.
+#define 	AT91C_SMC2_ACSS_1_CYCLE              (0x1 << 16) // (SMC2) One cycle less at the beginning and the end of the access.
+#define 	AT91C_SMC2_ACSS_2_CYCLES             (0x2 << 16) // (SMC2) Two cycles less at the beginning and the end of the access.
+#define 	AT91C_SMC2_ACSS_3_CYCLES             (0x3 << 16) // (SMC2) Three cycles less at the beginning and the end of the access.
+#define AT91C_SMC2_RWSETUP        (0x7 << 24) // (SMC2) Read and Write Signal Setup Time
+#define AT91C_SMC2_RWHOLD         (0x7 << 29) // (SMC2) Read and Write Signal Hold Time
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR SDRAM Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_SDRC structure ***
+#define SDRC_MR         ( 0) // SDRAM Controller Mode Register
+#define SDRC_TR         ( 4) // SDRAM Controller Refresh Timer Register
+#define SDRC_CR         ( 8) // SDRAM Controller Configuration Register
+#define SDRC_SRR        (12) // SDRAM Controller Self Refresh Register
+#define SDRC_LPR        (16) // SDRAM Controller Low Power Register
+#define SDRC_IER        (20) // SDRAM Controller Interrupt Enable Register
+#define SDRC_IDR        (24) // SDRAM Controller Interrupt Disable Register
+#define SDRC_IMR        (28) // SDRAM Controller Interrupt Mask Register
+#define SDRC_ISR        (32) // SDRAM Controller Interrupt Mask Register
+// -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- 
+#define AT91C_SDRC_MODE           (0xF <<  0) // (SDRC) Mode
+#define 	AT91C_SDRC_MODE_NORMAL_CMD           (0x0) // (SDRC) Normal Mode
+#define 	AT91C_SDRC_MODE_NOP_CMD              (0x1) // (SDRC) NOP Command
+#define 	AT91C_SDRC_MODE_PRCGALL_CMD          (0x2) // (SDRC) All Banks Precharge Command
+#define 	AT91C_SDRC_MODE_LMR_CMD              (0x3) // (SDRC) Load Mode Register Command
+#define 	AT91C_SDRC_MODE_RFSH_CMD             (0x4) // (SDRC) Refresh Command
+#define AT91C_SDRC_DBW            (0x1 <<  4) // (SDRC) Data Bus Width
+#define 	AT91C_SDRC_DBW_32_BITS              (0x0 <<  4) // (SDRC) 32 Bits datas bus
+#define 	AT91C_SDRC_DBW_16_BITS              (0x1 <<  4) // (SDRC) 16 Bits datas bus
+// -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- 
+#define AT91C_SDRC_COUNT          (0xFFF <<  0) // (SDRC) Refresh Counter
+// -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- 
+#define AT91C_SDRC_NC             (0x3 <<  0) // (SDRC) Number of Column Bits
+#define 	AT91C_SDRC_NC_8                    (0x0) // (SDRC) 8 Bits
+#define 	AT91C_SDRC_NC_9                    (0x1) // (SDRC) 9 Bits
+#define 	AT91C_SDRC_NC_10                   (0x2) // (SDRC) 10 Bits
+#define 	AT91C_SDRC_NC_11                   (0x3) // (SDRC) 11 Bits
+#define AT91C_SDRC_NR             (0x3 <<  2) // (SDRC) Number of Row Bits
+#define 	AT91C_SDRC_NR_11                   (0x0 <<  2) // (SDRC) 11 Bits
+#define 	AT91C_SDRC_NR_12                   (0x1 <<  2) // (SDRC) 12 Bits
+#define 	AT91C_SDRC_NR_13                   (0x2 <<  2) // (SDRC) 13 Bits
+#define AT91C_SDRC_NB             (0x1 <<  4) // (SDRC) Number of Banks
+#define 	AT91C_SDRC_NB_2_BANKS              (0x0 <<  4) // (SDRC) 2 banks
+#define 	AT91C_SDRC_NB_4_BANKS              (0x1 <<  4) // (SDRC) 4 banks
+#define AT91C_SDRC_CAS            (0x3 <<  5) // (SDRC) CAS Latency
+#define 	AT91C_SDRC_CAS_2                    (0x2 <<  5) // (SDRC) 2 cycles
+#define AT91C_SDRC_TWR            (0xF <<  7) // (SDRC) Number of Write Recovery Time Cycles
+#define AT91C_SDRC_TRC            (0xF << 11) // (SDRC) Number of RAS Cycle Time Cycles
+#define AT91C_SDRC_TRP            (0xF << 15) // (SDRC) Number of RAS Precharge Time Cycles
+#define AT91C_SDRC_TRCD           (0xF << 19) // (SDRC) Number of RAS to CAS Delay Cycles
+#define AT91C_SDRC_TRAS           (0xF << 23) // (SDRC) Number of RAS Active Time Cycles
+#define AT91C_SDRC_TXSR           (0xF << 27) // (SDRC) Number of Command Recovery Time Cycles
+// -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- 
+#define AT91C_SDRC_SRCB           (0x1 <<  0) // (SDRC) Self-refresh Command Bit
+// -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- 
+#define AT91C_SDRC_LPCB           (0x1 <<  0) // (SDRC) Low-power Command Bit
+// -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- 
+#define AT91C_SDRC_RES            (0x1 <<  0) // (SDRC) Refresh Error Status
+// -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- 
+// -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- 
+// -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Burst Flash Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_BFC structure ***
+#define BFC_MR          ( 0) // BFC Mode Register
+// -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- 
+#define AT91C_BFC_BFCOM           (0x3 <<  0) // (BFC) Burst Flash Controller Operating Mode
+#define 	AT91C_BFC_BFCOM_DISABLED             (0x0) // (BFC) NPCS0 is driven by the SMC or remains high.
+#define 	AT91C_BFC_BFCOM_ASYNC                (0x1) // (BFC) Asynchronous
+#define 	AT91C_BFC_BFCOM_BURST_READ           (0x2) // (BFC) Burst Read
+#define AT91C_BFC_BFCC            (0x3 <<  2) // (BFC) Burst Flash Controller Operating Mode
+#define 	AT91C_BFC_BFCC_MCK                  (0x1 <<  2) // (BFC) Master Clock.
+#define 	AT91C_BFC_BFCC_MCK_DIV_2            (0x2 <<  2) // (BFC) Master Clock divided by 2.
+#define 	AT91C_BFC_BFCC_MCK_DIV_4            (0x3 <<  2) // (BFC) Master Clock divided by 4.
+#define AT91C_BFC_AVL             (0xF <<  4) // (BFC) Address Valid Latency
+#define AT91C_BFC_PAGES           (0x7 <<  8) // (BFC) Page Size
+#define 	AT91C_BFC_PAGES_NO_PAGE              (0x0 <<  8) // (BFC) No page handling.
+#define 	AT91C_BFC_PAGES_16                   (0x1 <<  8) // (BFC) 16 bytes page size.
+#define 	AT91C_BFC_PAGES_32                   (0x2 <<  8) // (BFC) 32 bytes page size.
+#define 	AT91C_BFC_PAGES_64                   (0x3 <<  8) // (BFC) 64 bytes page size.
+#define 	AT91C_BFC_PAGES_128                  (0x4 <<  8) // (BFC) 128 bytes page size.
+#define 	AT91C_BFC_PAGES_256                  (0x5 <<  8) // (BFC) 256 bytes page size.
+#define 	AT91C_BFC_PAGES_512                  (0x6 <<  8) // (BFC) 512 bytes page size.
+#define 	AT91C_BFC_PAGES_1024                 (0x7 <<  8) // (BFC) 1024 bytes page size.
+#define AT91C_BFC_OEL             (0x3 << 12) // (BFC) Output Enable Latency
+#define AT91C_BFC_BAAEN           (0x1 << 16) // (BFC) Burst Address Advance Enable
+#define AT91C_BFC_BFOEH           (0x1 << 17) // (BFC) Burst Flash Output Enable Handling
+#define AT91C_BFC_MUXEN           (0x1 << 18) // (BFC) Multiplexed Bus Enable
+#define AT91C_BFC_RDYEN           (0x1 << 19) // (BFC) Ready Enable Mode
+
+// *****************************************************************************
+//               REGISTER ADDRESS DEFINITION FOR AT91RM9200
+// *****************************************************************************
+// ========== Register definition for SYS peripheral ========== 
+// ========== Register definition for MC peripheral ========== 
+#define AT91C_MC_PUER             (0xFFFFFF54) // (MC) MC Protection Unit Enable Register
+#define AT91C_MC_ASR              (0xFFFFFF04) // (MC) MC Abort Status Register
+#define AT91C_MC_PUP              (0xFFFFFF50) // (MC) MC Protection Unit Peripherals
+#define AT91C_MC_PUIA             (0xFFFFFF10) // (MC) MC Protection Unit Area
+#define AT91C_MC_AASR             (0xFFFFFF08) // (MC) MC Abort Address Status Register
+#define AT91C_MC_RCR              (0xFFFFFF00) // (MC) MC Remap Control Register
+// ========== Register definition for RTC peripheral ========== 
+#define AT91C_RTC_IMR             (0xFFFFFE28) // (RTC) Interrupt Mask Register
+#define AT91C_RTC_IER             (0xFFFFFE20) // (RTC) Interrupt Enable Register
+#define AT91C_RTC_SR              (0xFFFFFE18) // (RTC) Status Register
+#define AT91C_RTC_TIMALR          (0xFFFFFE10) // (RTC) Time Alarm Register
+#define AT91C_RTC_TIMR            (0xFFFFFE08) // (RTC) Time Register
+#define AT91C_RTC_CR              (0xFFFFFE00) // (RTC) Control Register
+#define AT91C_RTC_VER             (0xFFFFFE2C) // (RTC) Valid Entry Register
+#define AT91C_RTC_IDR             (0xFFFFFE24) // (RTC) Interrupt Disable Register
+#define AT91C_RTC_SCCR            (0xFFFFFE1C) // (RTC) Status Clear Command Register
+#define AT91C_RTC_CALALR          (0xFFFFFE14) // (RTC) Calendar Alarm Register
+#define AT91C_RTC_CALR            (0xFFFFFE0C) // (RTC) Calendar Register
+#define AT91C_RTC_MR              (0xFFFFFE04) // (RTC) Mode Register
+// ========== Register definition for ST peripheral ========== 
+#define AT91C_ST_CRTR             (0xFFFFFD24) // (ST) Current Real-time Register
+#define AT91C_ST_IMR              (0xFFFFFD1C) // (ST) Interrupt Mask Register
+#define AT91C_ST_IER              (0xFFFFFD14) // (ST) Interrupt Enable Register
+#define AT91C_ST_RTMR             (0xFFFFFD0C) // (ST) Real-time Mode Register
+#define AT91C_ST_PIMR             (0xFFFFFD04) // (ST) Period Interval Mode Register
+#define AT91C_ST_RTAR             (0xFFFFFD20) // (ST) Real-time Alarm Register
+#define AT91C_ST_IDR              (0xFFFFFD18) // (ST) Interrupt Disable Register
+#define AT91C_ST_SR               (0xFFFFFD10) // (ST) Status Register
+#define AT91C_ST_WDMR             (0xFFFFFD08) // (ST) Watchdog Mode Register
+#define AT91C_ST_CR               (0xFFFFFD00) // (ST) Control Register
+// ========== Register definition for PMC peripheral ========== 
+#define AT91C_PMC_SCSR            (0xFFFFFC08) // (PMC) System Clock Status Register
+#define AT91C_PMC_SCER            (0xFFFFFC00) // (PMC) System Clock Enable Register
+#define AT91C_PMC_IMR             (0xFFFFFC6C) // (PMC) Interrupt Mask Register
+#define AT91C_PMC_IDR             (0xFFFFFC64) // (PMC) Interrupt Disable Register
+#define AT91C_PMC_PCDR            (0xFFFFFC14) // (PMC) Peripheral Clock Disable Register
+#define AT91C_PMC_SCDR            (0xFFFFFC04) // (PMC) System Clock Disable Register
+#define AT91C_PMC_SR              (0xFFFFFC68) // (PMC) Status Register
+#define AT91C_PMC_IER             (0xFFFFFC60) // (PMC) Interrupt Enable Register
+#define AT91C_PMC_MCKR            (0xFFFFFC30) // (PMC) Master Clock Register
+#define AT91C_PMC_PCER            (0xFFFFFC10) // (PMC) Peripheral Clock Enable Register
+#define AT91C_PMC_PCSR            (0xFFFFFC18) // (PMC) Peripheral Clock Status Register
+#define AT91C_PMC_PCKR            (0xFFFFFC40) // (PMC) Programmable Clock Register
+// ========== Register definition for CKGR peripheral ========== 
+#define AT91C_CKGR_PLLBR          (0xFFFFFC2C) // (CKGR) PLL B Register
+#define AT91C_CKGR_MCFR           (0xFFFFFC24) // (CKGR) Main Clock  Frequency Register
+#define AT91C_CKGR_PLLAR          (0xFFFFFC28) // (CKGR) PLL A Register
+#define AT91C_CKGR_MOR            (0xFFFFFC20) // (CKGR) Main Oscillator Register
+// ========== Register definition for PIOD peripheral ========== 
+#define AT91C_PIOD_PDSR           (0xFFFFFA3C) // (PIOD) Pin Data Status Register
+#define AT91C_PIOD_CODR           (0xFFFFFA34) // (PIOD) Clear Output Data Register
+#define AT91C_PIOD_OWER           (0xFFFFFAA0) // (PIOD) Output Write Enable Register
+#define AT91C_PIOD_MDER           (0xFFFFFA50) // (PIOD) Multi-driver Enable Register
+#define AT91C_PIOD_IMR            (0xFFFFFA48) // (PIOD) Interrupt Mask Register
+#define AT91C_PIOD_IER            (0xFFFFFA40) // (PIOD) Interrupt Enable Register
+#define AT91C_PIOD_ODSR           (0xFFFFFA38) // (PIOD) Output Data Status Register
+#define AT91C_PIOD_SODR           (0xFFFFFA30) // (PIOD) Set Output Data Register
+#define AT91C_PIOD_PER            (0xFFFFFA00) // (PIOD) PIO Enable Register
+#define AT91C_PIOD_OWDR           (0xFFFFFAA4) // (PIOD) Output Write Disable Register
+#define AT91C_PIOD_PPUER          (0xFFFFFA64) // (PIOD) Pull-up Enable Register
+#define AT91C_PIOD_MDDR           (0xFFFFFA54) // (PIOD) Multi-driver Disable Register
+#define AT91C_PIOD_ISR            (0xFFFFFA4C) // (PIOD) Interrupt Status Register
+#define AT91C_PIOD_IDR            (0xFFFFFA44) // (PIOD) Interrupt Disable Register
+#define AT91C_PIOD_PDR            (0xFFFFFA04) // (PIOD) PIO Disable Register
+#define AT91C_PIOD_ODR            (0xFFFFFA14) // (PIOD) Output Disable Registerr
+#define AT91C_PIOD_OWSR           (0xFFFFFAA8) // (PIOD) Output Write Status Register
+#define AT91C_PIOD_ABSR           (0xFFFFFA78) // (PIOD) AB Select Status Register
+#define AT91C_PIOD_ASR            (0xFFFFFA70) // (PIOD) Select A Register
+#define AT91C_PIOD_PPUSR          (0xFFFFFA68) // (PIOD) Pad Pull-up Status Register
+#define AT91C_PIOD_PPUDR          (0xFFFFFA60) // (PIOD) Pull-up Disable Register
+#define AT91C_PIOD_MDSR           (0xFFFFFA58) // (PIOD) Multi-driver Status Register
+#define AT91C_PIOD_PSR            (0xFFFFFA08) // (PIOD) PIO Status Register
+#define AT91C_PIOD_OER            (0xFFFFFA10) // (PIOD) Output Enable Register
+#define AT91C_PIOD_OSR            (0xFFFFFA18) // (PIOD) Output Status Register
+#define AT91C_PIOD_IFER           (0xFFFFFA20) // (PIOD) Input Filter Enable Register
+#define AT91C_PIOD_BSR            (0xFFFFFA74) // (PIOD) Select B Register
+#define AT91C_PIOD_IFDR           (0xFFFFFA24) // (PIOD) Input Filter Disable Register
+#define AT91C_PIOD_IFSR           (0xFFFFFA28) // (PIOD) Input Filter Status Register
+// ========== Register definition for PIOC peripheral ========== 
+#define AT91C_PIOC_IFDR           (0xFFFFF824) // (PIOC) Input Filter Disable Register
+#define AT91C_PIOC_ODR            (0xFFFFF814) // (PIOC) Output Disable Registerr
+#define AT91C_PIOC_ABSR           (0xFFFFF878) // (PIOC) AB Select Status Register
+#define AT91C_PIOC_SODR           (0xFFFFF830) // (PIOC) Set Output Data Register
+#define AT91C_PIOC_IFSR           (0xFFFFF828) // (PIOC) Input Filter Status Register
+#define AT91C_PIOC_CODR           (0xFFFFF834) // (PIOC) Clear Output Data Register
+#define AT91C_PIOC_ODSR           (0xFFFFF838) // (PIOC) Output Data Status Register
+#define AT91C_PIOC_IER            (0xFFFFF840) // (PIOC) Interrupt Enable Register
+#define AT91C_PIOC_IMR            (0xFFFFF848) // (PIOC) Interrupt Mask Register
+#define AT91C_PIOC_OWDR           (0xFFFFF8A4) // (PIOC) Output Write Disable Register
+#define AT91C_PIOC_MDDR           (0xFFFFF854) // (PIOC) Multi-driver Disable Register
+#define AT91C_PIOC_PDSR           (0xFFFFF83C) // (PIOC) Pin Data Status Register
+#define AT91C_PIOC_IDR            (0xFFFFF844) // (PIOC) Interrupt Disable Register
+#define AT91C_PIOC_ISR            (0xFFFFF84C) // (PIOC) Interrupt Status Register
+#define AT91C_PIOC_PDR            (0xFFFFF804) // (PIOC) PIO Disable Register
+#define AT91C_PIOC_OWSR           (0xFFFFF8A8) // (PIOC) Output Write Status Register
+#define AT91C_PIOC_OWER           (0xFFFFF8A0) // (PIOC) Output Write Enable Register
+#define AT91C_PIOC_ASR            (0xFFFFF870) // (PIOC) Select A Register
+#define AT91C_PIOC_PPUSR          (0xFFFFF868) // (PIOC) Pad Pull-up Status Register
+#define AT91C_PIOC_PPUDR          (0xFFFFF860) // (PIOC) Pull-up Disable Register
+#define AT91C_PIOC_MDSR           (0xFFFFF858) // (PIOC) Multi-driver Status Register
+#define AT91C_PIOC_MDER           (0xFFFFF850) // (PIOC) Multi-driver Enable Register
+#define AT91C_PIOC_IFER           (0xFFFFF820) // (PIOC) Input Filter Enable Register
+#define AT91C_PIOC_OSR            (0xFFFFF818) // (PIOC) Output Status Register
+#define AT91C_PIOC_OER            (0xFFFFF810) // (PIOC) Output Enable Register
+#define AT91C_PIOC_PSR            (0xFFFFF808) // (PIOC) PIO Status Register
+#define AT91C_PIOC_PER            (0xFFFFF800) // (PIOC) PIO Enable Register
+#define AT91C_PIOC_BSR            (0xFFFFF874) // (PIOC) Select B Register
+#define AT91C_PIOC_PPUER          (0xFFFFF864) // (PIOC) Pull-up Enable Register
+// ========== Register definition for PIOB peripheral ========== 
+#define AT91C_PIOB_OWSR           (0xFFFFF6A8) // (PIOB) Output Write Status Register
+#define AT91C_PIOB_PPUSR          (0xFFFFF668) // (PIOB) Pad Pull-up Status Register
+#define AT91C_PIOB_PPUDR          (0xFFFFF660) // (PIOB) Pull-up Disable Register
+#define AT91C_PIOB_MDSR           (0xFFFFF658) // (PIOB) Multi-driver Status Register
+#define AT91C_PIOB_MDER           (0xFFFFF650) // (PIOB) Multi-driver Enable Register
+#define AT91C_PIOB_IMR            (0xFFFFF648) // (PIOB) Interrupt Mask Register
+#define AT91C_PIOB_OSR            (0xFFFFF618) // (PIOB) Output Status Register
+#define AT91C_PIOB_OER            (0xFFFFF610) // (PIOB) Output Enable Register
+#define AT91C_PIOB_PSR            (0xFFFFF608) // (PIOB) PIO Status Register
+#define AT91C_PIOB_PER            (0xFFFFF600) // (PIOB) PIO Enable Register
+#define AT91C_PIOB_BSR            (0xFFFFF674) // (PIOB) Select B Register
+#define AT91C_PIOB_PPUER          (0xFFFFF664) // (PIOB) Pull-up Enable Register
+#define AT91C_PIOB_IFDR           (0xFFFFF624) // (PIOB) Input Filter Disable Register
+#define AT91C_PIOB_ODR            (0xFFFFF614) // (PIOB) Output Disable Registerr
+#define AT91C_PIOB_ABSR           (0xFFFFF678) // (PIOB) AB Select Status Register
+#define AT91C_PIOB_ASR            (0xFFFFF670) // (PIOB) Select A Register
+#define AT91C_PIOB_IFER           (0xFFFFF620) // (PIOB) Input Filter Enable Register
+#define AT91C_PIOB_IFSR           (0xFFFFF628) // (PIOB) Input Filter Status Register
+#define AT91C_PIOB_SODR           (0xFFFFF630) // (PIOB) Set Output Data Register
+#define AT91C_PIOB_ODSR           (0xFFFFF638) // (PIOB) Output Data Status Register
+#define AT91C_PIOB_CODR           (0xFFFFF634) // (PIOB) Clear Output Data Register
+#define AT91C_PIOB_PDSR           (0xFFFFF63C) // (PIOB) Pin Data Status Register
+#define AT91C_PIOB_OWER           (0xFFFFF6A0) // (PIOB) Output Write Enable Register
+#define AT91C_PIOB_IER            (0xFFFFF640) // (PIOB) Interrupt Enable Register
+#define AT91C_PIOB_OWDR           (0xFFFFF6A4) // (PIOB) Output Write Disable Register
+#define AT91C_PIOB_MDDR           (0xFFFFF654) // (PIOB) Multi-driver Disable Register
+#define AT91C_PIOB_ISR            (0xFFFFF64C) // (PIOB) Interrupt Status Register
+#define AT91C_PIOB_IDR            (0xFFFFF644) // (PIOB) Interrupt Disable Register
+#define AT91C_PIOB_PDR            (0xFFFFF604) // (PIOB) PIO Disable Register
+// ========== Register definition for PIOA peripheral ========== 
+#define AT91C_PIOA_IMR            (0xFFFFF448) // (PIOA) Interrupt Mask Register
+#define AT91C_PIOA_IER            (0xFFFFF440) // (PIOA) Interrupt Enable Register
+#define AT91C_PIOA_OWDR           (0xFFFFF4A4) // (PIOA) Output Write Disable Register
+#define AT91C_PIOA_ISR            (0xFFFFF44C) // (PIOA) Interrupt Status Register
+#define AT91C_PIOA_PPUDR          (0xFFFFF460) // (PIOA) Pull-up Disable Register
+#define AT91C_PIOA_MDSR           (0xFFFFF458) // (PIOA) Multi-driver Status Register
+#define AT91C_PIOA_MDER           (0xFFFFF450) // (PIOA) Multi-driver Enable Register
+#define AT91C_PIOA_PER            (0xFFFFF400) // (PIOA) PIO Enable Register
+#define AT91C_PIOA_PSR            (0xFFFFF408) // (PIOA) PIO Status Register
+#define AT91C_PIOA_OER            (0xFFFFF410) // (PIOA) Output Enable Register
+#define AT91C_PIOA_BSR            (0xFFFFF474) // (PIOA) Select B Register
+#define AT91C_PIOA_PPUER          (0xFFFFF464) // (PIOA) Pull-up Enable Register
+#define AT91C_PIOA_MDDR           (0xFFFFF454) // (PIOA) Multi-driver Disable Register
+#define AT91C_PIOA_PDR            (0xFFFFF404) // (PIOA) PIO Disable Register
+#define AT91C_PIOA_ODR            (0xFFFFF414) // (PIOA) Output Disable Registerr
+#define AT91C_PIOA_IFDR           (0xFFFFF424) // (PIOA) Input Filter Disable Register
+#define AT91C_PIOA_ABSR           (0xFFFFF478) // (PIOA) AB Select Status Register
+#define AT91C_PIOA_ASR            (0xFFFFF470) // (PIOA) Select A Register
+#define AT91C_PIOA_PPUSR          (0xFFFFF468) // (PIOA) Pad Pull-up Status Register
+#define AT91C_PIOA_ODSR           (0xFFFFF438) // (PIOA) Output Data Status Register
+#define AT91C_PIOA_SODR           (0xFFFFF430) // (PIOA) Set Output Data Register
+#define AT91C_PIOA_IFSR           (0xFFFFF428) // (PIOA) Input Filter Status Register
+#define AT91C_PIOA_IFER           (0xFFFFF420) // (PIOA) Input Filter Enable Register
+#define AT91C_PIOA_OSR            (0xFFFFF418) // (PIOA) Output Status Register
+#define AT91C_PIOA_IDR            (0xFFFFF444) // (PIOA) Interrupt Disable Register
+#define AT91C_PIOA_PDSR           (0xFFFFF43C) // (PIOA) Pin Data Status Register
+#define AT91C_PIOA_CODR           (0xFFFFF434) // (PIOA) Clear Output Data Register
+#define AT91C_PIOA_OWSR           (0xFFFFF4A8) // (PIOA) Output Write Status Register
+#define AT91C_PIOA_OWER           (0xFFFFF4A0) // (PIOA) Output Write Enable Register
+// ========== Register definition for DBGU peripheral ========== 
+#define AT91C_DBGU_C2R            (0xFFFFF244) // (DBGU) Chip ID2 Register
+#define AT91C_DBGU_THR            (0xFFFFF21C) // (DBGU) Transmitter Holding Register
+#define AT91C_DBGU_CSR            (0xFFFFF214) // (DBGU) Channel Status Register
+#define AT91C_DBGU_IDR            (0xFFFFF20C) // (DBGU) Interrupt Disable Register
+#define AT91C_DBGU_MR             (0xFFFFF204) // (DBGU) Mode Register
+#define AT91C_DBGU_FNTR           (0xFFFFF248) // (DBGU) Force NTRST Register
+#define AT91C_DBGU_C1R            (0xFFFFF240) // (DBGU) Chip ID1 Register
+#define AT91C_DBGU_BRGR           (0xFFFFF220) // (DBGU) Baud Rate Generator Register
+#define AT91C_DBGU_RHR            (0xFFFFF218) // (DBGU) Receiver Holding Register
+#define AT91C_DBGU_IMR            (0xFFFFF210) // (DBGU) Interrupt Mask Register
+#define AT91C_DBGU_IER            (0xFFFFF208) // (DBGU) Interrupt Enable Register
+#define AT91C_DBGU_CR             (0xFFFFF200) // (DBGU) Control Register
+// ========== Register definition for PDC_DBGU peripheral ========== 
+#define AT91C_DBGU_TNCR           (0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register
+#define AT91C_DBGU_RNCR           (0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register
+#define AT91C_DBGU_PTCR           (0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register
+#define AT91C_DBGU_PTSR           (0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register
+#define AT91C_DBGU_RCR            (0xFFFFF304) // (PDC_DBGU) Receive Counter Register
+#define AT91C_DBGU_TCR            (0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register
+#define AT91C_DBGU_RPR            (0xFFFFF300) // (PDC_DBGU) Receive Pointer Register
+#define AT91C_DBGU_TPR            (0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register
+#define AT91C_DBGU_RNPR           (0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register
+#define AT91C_DBGU_TNPR           (0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register
+// ========== Register definition for AIC peripheral ========== 
+#define AT91C_AIC_ICCR            (0xFFFFF128) // (AIC) Interrupt Clear Command Register
+#define AT91C_AIC_IECR            (0xFFFFF120) // (AIC) Interrupt Enable Command Register
+#define AT91C_AIC_SMR             (0xFFFFF000) // (AIC) Source Mode Register
+#define AT91C_AIC_ISCR            (0xFFFFF12C) // (AIC) Interrupt Set Command Register
+#define AT91C_AIC_EOICR           (0xFFFFF130) // (AIC) End of Interrupt Command Register
+#define AT91C_AIC_DCR             (0xFFFFF138) // (AIC) Debug Control Register (Protect)
+#define AT91C_AIC_FFER            (0xFFFFF140) // (AIC) Fast Forcing Enable Register
+#define AT91C_AIC_SVR             (0xFFFFF080) // (AIC) Source Vector Register
+#define AT91C_AIC_SPU             (0xFFFFF134) // (AIC) Spurious Vector Register
+#define AT91C_AIC_FFDR            (0xFFFFF144) // (AIC) Fast Forcing Disable Register
+#define AT91C_AIC_FVR             (0xFFFFF104) // (AIC) FIQ Vector Register
+#define AT91C_AIC_FFSR            (0xFFFFF148) // (AIC) Fast Forcing Status Register
+#define AT91C_AIC_IMR             (0xFFFFF110) // (AIC) Interrupt Mask Register
+#define AT91C_AIC_ISR             (0xFFFFF108) // (AIC) Interrupt Status Register
+#define AT91C_AIC_IVR             (0xFFFFF100) // (AIC) IRQ Vector Register
+#define AT91C_AIC_IDCR            (0xFFFFF124) // (AIC) Interrupt Disable Command Register
+#define AT91C_AIC_CISR            (0xFFFFF114) // (AIC) Core Interrupt Status Register
+#define AT91C_AIC_IPR             (0xFFFFF10C) // (AIC) Interrupt Pending Register
+// ========== Register definition for PDC_SPI peripheral ========== 
+#define AT91C_SPI_PTCR            (0xFFFE0120) // (PDC_SPI) PDC Transfer Control Register
+#define AT91C_SPI_TNPR            (0xFFFE0118) // (PDC_SPI) Transmit Next Pointer Register
+#define AT91C_SPI_RNPR            (0xFFFE0110) // (PDC_SPI) Receive Next Pointer Register
+#define AT91C_SPI_TPR             (0xFFFE0108) // (PDC_SPI) Transmit Pointer Register
+#define AT91C_SPI_RPR             (0xFFFE0100) // (PDC_SPI) Receive Pointer Register
+#define AT91C_SPI_PTSR            (0xFFFE0124) // (PDC_SPI) PDC Transfer Status Register
+#define AT91C_SPI_TNCR            (0xFFFE011C) // (PDC_SPI) Transmit Next Counter Register
+#define AT91C_SPI_RNCR            (0xFFFE0114) // (PDC_SPI) Receive Next Counter Register
+#define AT91C_SPI_TCR             (0xFFFE010C) // (PDC_SPI) Transmit Counter Register
+#define AT91C_SPI_RCR             (0xFFFE0104) // (PDC_SPI) Receive Counter Register
+// ========== Register definition for SPI peripheral ========== 
+#define AT91C_SPI_CSR             (0xFFFE0030) // (SPI) Chip Select Register
+#define AT91C_SPI_IDR             (0xFFFE0018) // (SPI) Interrupt Disable Register
+#define AT91C_SPI_SR              (0xFFFE0010) // (SPI) Status Register
+#define AT91C_SPI_RDR             (0xFFFE0008) // (SPI) Receive Data Register
+#define AT91C_SPI_CR              (0xFFFE0000) // (SPI) Control Register
+#define AT91C_SPI_IMR             (0xFFFE001C) // (SPI) Interrupt Mask Register
+#define AT91C_SPI_IER             (0xFFFE0014) // (SPI) Interrupt Enable Register
+#define AT91C_SPI_TDR             (0xFFFE000C) // (SPI) Transmit Data Register
+#define AT91C_SPI_MR              (0xFFFE0004) // (SPI) Mode Register
+// ========== Register definition for PDC_SSC2 peripheral ========== 
+#define AT91C_SSC2_PTCR           (0xFFFD8120) // (PDC_SSC2) PDC Transfer Control Register
+#define AT91C_SSC2_TNPR           (0xFFFD8118) // (PDC_SSC2) Transmit Next Pointer Register
+#define AT91C_SSC2_RNPR           (0xFFFD8110) // (PDC_SSC2) Receive Next Pointer Register
+#define AT91C_SSC2_TPR            (0xFFFD8108) // (PDC_SSC2) Transmit Pointer Register
+#define AT91C_SSC2_RPR            (0xFFFD8100) // (PDC_SSC2) Receive Pointer Register
+#define AT91C_SSC2_PTSR           (0xFFFD8124) // (PDC_SSC2) PDC Transfer Status Register
+#define AT91C_SSC2_TNCR           (0xFFFD811C) // (PDC_SSC2) Transmit Next Counter Register
+#define AT91C_SSC2_RNCR           (0xFFFD8114) // (PDC_SSC2) Receive Next Counter Register
+#define AT91C_SSC2_TCR            (0xFFFD810C) // (PDC_SSC2) Transmit Counter Register
+#define AT91C_SSC2_RCR            (0xFFFD8104) // (PDC_SSC2) Receive Counter Register
+// ========== Register definition for SSC2 peripheral ========== 
+#define AT91C_SSC2_IMR            (0xFFFD804C) // (SSC2) Interrupt Mask Register
+#define AT91C_SSC2_IER            (0xFFFD8044) // (SSC2) Interrupt Enable Register
+#define AT91C_SSC2_RC1R           (0xFFFD803C) // (SSC2) Receive Compare 1 Register
+#define AT91C_SSC2_TSHR           (0xFFFD8034) // (SSC2) Transmit Sync Holding Register
+#define AT91C_SSC2_CMR            (0xFFFD8004) // (SSC2) Clock Mode Register
+#define AT91C_SSC2_IDR            (0xFFFD8048) // (SSC2) Interrupt Disable Register
+#define AT91C_SSC2_TCMR           (0xFFFD8018) // (SSC2) Transmit Clock Mode Register
+#define AT91C_SSC2_RCMR           (0xFFFD8010) // (SSC2) Receive Clock ModeRegister
+#define AT91C_SSC2_CR             (0xFFFD8000) // (SSC2) Control Register
+#define AT91C_SSC2_RFMR           (0xFFFD8014) // (SSC2) Receive Frame Mode Register
+#define AT91C_SSC2_TFMR           (0xFFFD801C) // (SSC2) Transmit Frame Mode Register
+#define AT91C_SSC2_THR            (0xFFFD8024) // (SSC2) Transmit Holding Register
+#define AT91C_SSC2_SR             (0xFFFD8040) // (SSC2) Status Register
+#define AT91C_SSC2_RC0R           (0xFFFD8038) // (SSC2) Receive Compare 0 Register
+#define AT91C_SSC2_RSHR           (0xFFFD8030) // (SSC2) Receive Sync Holding Register
+#define AT91C_SSC2_RHR            (0xFFFD8020) // (SSC2) Receive Holding Register
+// ========== Register definition for PDC_SSC1 peripheral ========== 
+#define AT91C_SSC1_PTCR           (0xFFFD4120) // (PDC_SSC1) PDC Transfer Control Register
+#define AT91C_SSC1_TNPR           (0xFFFD4118) // (PDC_SSC1) Transmit Next Pointer Register
+#define AT91C_SSC1_RNPR           (0xFFFD4110) // (PDC_SSC1) Receive Next Pointer Register
+#define AT91C_SSC1_TPR            (0xFFFD4108) // (PDC_SSC1) Transmit Pointer Register
+#define AT91C_SSC1_RPR            (0xFFFD4100) // (PDC_SSC1) Receive Pointer Register
+#define AT91C_SSC1_PTSR           (0xFFFD4124) // (PDC_SSC1) PDC Transfer Status Register
+#define AT91C_SSC1_TNCR           (0xFFFD411C) // (PDC_SSC1) Transmit Next Counter Register
+#define AT91C_SSC1_RNCR           (0xFFFD4114) // (PDC_SSC1) Receive Next Counter Register
+#define AT91C_SSC1_TCR            (0xFFFD410C) // (PDC_SSC1) Transmit Counter Register
+#define AT91C_SSC1_RCR            (0xFFFD4104) // (PDC_SSC1) Receive Counter Register
+// ========== Register definition for SSC1 peripheral ========== 
+#define AT91C_SSC1_RFMR           (0xFFFD4014) // (SSC1) Receive Frame Mode Register
+#define AT91C_SSC1_CMR            (0xFFFD4004) // (SSC1) Clock Mode Register
+#define AT91C_SSC1_IDR            (0xFFFD4048) // (SSC1) Interrupt Disable Register
+#define AT91C_SSC1_SR             (0xFFFD4040) // (SSC1) Status Register
+#define AT91C_SSC1_RC0R           (0xFFFD4038) // (SSC1) Receive Compare 0 Register
+#define AT91C_SSC1_RSHR           (0xFFFD4030) // (SSC1) Receive Sync Holding Register
+#define AT91C_SSC1_RHR            (0xFFFD4020) // (SSC1) Receive Holding Register
+#define AT91C_SSC1_TCMR           (0xFFFD4018) // (SSC1) Transmit Clock Mode Register
+#define AT91C_SSC1_RCMR           (0xFFFD4010) // (SSC1) Receive Clock ModeRegister
+#define AT91C_SSC1_CR             (0xFFFD4000) // (SSC1) Control Register
+#define AT91C_SSC1_IMR            (0xFFFD404C) // (SSC1) Interrupt Mask Register
+#define AT91C_SSC1_IER            (0xFFFD4044) // (SSC1) Interrupt Enable Register
+#define AT91C_SSC1_RC1R           (0xFFFD403C) // (SSC1) Receive Compare 1 Register
+#define AT91C_SSC1_TSHR           (0xFFFD4034) // (SSC1) Transmit Sync Holding Register
+#define AT91C_SSC1_THR            (0xFFFD4024) // (SSC1) Transmit Holding Register
+#define AT91C_SSC1_TFMR           (0xFFFD401C) // (SSC1) Transmit Frame Mode Register
+// ========== Register definition for PDC_SSC0 peripheral ========== 
+#define AT91C_SSC0_PTCR           (0xFFFD0120) // (PDC_SSC0) PDC Transfer Control Register
+#define AT91C_SSC0_TNPR           (0xFFFD0118) // (PDC_SSC0) Transmit Next Pointer Register
+#define AT91C_SSC0_RNPR           (0xFFFD0110) // (PDC_SSC0) Receive Next Pointer Register
+#define AT91C_SSC0_TPR            (0xFFFD0108) // (PDC_SSC0) Transmit Pointer Register
+#define AT91C_SSC0_RPR            (0xFFFD0100) // (PDC_SSC0) Receive Pointer Register
+#define AT91C_SSC0_PTSR           (0xFFFD0124) // (PDC_SSC0) PDC Transfer Status Register
+#define AT91C_SSC0_TNCR           (0xFFFD011C) // (PDC_SSC0) Transmit Next Counter Register
+#define AT91C_SSC0_RNCR           (0xFFFD0114) // (PDC_SSC0) Receive Next Counter Register
+#define AT91C_SSC0_TCR            (0xFFFD010C) // (PDC_SSC0) Transmit Counter Register
+#define AT91C_SSC0_RCR            (0xFFFD0104) // (PDC_SSC0) Receive Counter Register
+// ========== Register definition for SSC0 peripheral ========== 
+#define AT91C_SSC0_IMR            (0xFFFD004C) // (SSC0) Interrupt Mask Register
+#define AT91C_SSC0_IER            (0xFFFD0044) // (SSC0) Interrupt Enable Register
+#define AT91C_SSC0_RC1R           (0xFFFD003C) // (SSC0) Receive Compare 1 Register
+#define AT91C_SSC0_TSHR           (0xFFFD0034) // (SSC0) Transmit Sync Holding Register
+#define AT91C_SSC0_THR            (0xFFFD0024) // (SSC0) Transmit Holding Register
+#define AT91C_SSC0_TFMR           (0xFFFD001C) // (SSC0) Transmit Frame Mode Register
+#define AT91C_SSC0_RFMR           (0xFFFD0014) // (SSC0) Receive Frame Mode Register
+#define AT91C_SSC0_CMR            (0xFFFD0004) // (SSC0) Clock Mode Register
+#define AT91C_SSC0_IDR            (0xFFFD0048) // (SSC0) Interrupt Disable Register
+#define AT91C_SSC0_SR             (0xFFFD0040) // (SSC0) Status Register
+#define AT91C_SSC0_RC0R           (0xFFFD0038) // (SSC0) Receive Compare 0 Register
+#define AT91C_SSC0_RSHR           (0xFFFD0030) // (SSC0) Receive Sync Holding Register
+#define AT91C_SSC0_RHR            (0xFFFD0020) // (SSC0) Receive Holding Register
+#define AT91C_SSC0_TCMR           (0xFFFD0018) // (SSC0) Transmit Clock Mode Register
+#define AT91C_SSC0_RCMR           (0xFFFD0010) // (SSC0) Receive Clock ModeRegister
+#define AT91C_SSC0_CR             (0xFFFD0000) // (SSC0) Control Register
+// ========== Register definition for PDC_US3 peripheral ========== 
+#define AT91C_US3_PTSR            (0xFFFCC124) // (PDC_US3) PDC Transfer Status Register
+#define AT91C_US3_TNCR            (0xFFFCC11C) // (PDC_US3) Transmit Next Counter Register
+#define AT91C_US3_RNCR            (0xFFFCC114) // (PDC_US3) Receive Next Counter Register
+#define AT91C_US3_TCR             (0xFFFCC10C) // (PDC_US3) Transmit Counter Register
+#define AT91C_US3_RCR             (0xFFFCC104) // (PDC_US3) Receive Counter Register
+#define AT91C_US3_PTCR            (0xFFFCC120) // (PDC_US3) PDC Transfer Control Register
+#define AT91C_US3_TNPR            (0xFFFCC118) // (PDC_US3) Transmit Next Pointer Register
+#define AT91C_US3_RNPR            (0xFFFCC110) // (PDC_US3) Receive Next Pointer Register
+#define AT91C_US3_TPR             (0xFFFCC108) // (PDC_US3) Transmit Pointer Register
+#define AT91C_US3_RPR             (0xFFFCC100) // (PDC_US3) Receive Pointer Register
+// ========== Register definition for US3 peripheral ========== 
+#define AT91C_US3_IF              (0xFFFCC04C) // (US3) IRDA_FILTER Register
+#define AT91C_US3_NER             (0xFFFCC044) // (US3) Nb Errors Register
+#define AT91C_US3_RTOR            (0xFFFCC024) // (US3) Receiver Time-out Register
+#define AT91C_US3_THR             (0xFFFCC01C) // (US3) Transmitter Holding Register
+#define AT91C_US3_CSR             (0xFFFCC014) // (US3) Channel Status Register
+#define AT91C_US3_IDR             (0xFFFCC00C) // (US3) Interrupt Disable Register
+#define AT91C_US3_MR              (0xFFFCC004) // (US3) Mode Register
+#define AT91C_US3_XXR             (0xFFFCC048) // (US3) XON_XOFF Register
+#define AT91C_US3_FIDI            (0xFFFCC040) // (US3) FI_DI_Ratio Register
+#define AT91C_US3_TTGR            (0xFFFCC028) // (US3) Transmitter Time-guard Register
+#define AT91C_US3_BRGR            (0xFFFCC020) // (US3) Baud Rate Generator Register
+#define AT91C_US3_RHR             (0xFFFCC018) // (US3) Receiver Holding Register
+#define AT91C_US3_IMR             (0xFFFCC010) // (US3) Interrupt Mask Register
+#define AT91C_US3_IER             (0xFFFCC008) // (US3) Interrupt Enable Register
+#define AT91C_US3_CR              (0xFFFCC000) // (US3) Control Register
+// ========== Register definition for PDC_US2 peripheral ========== 
+#define AT91C_US2_PTSR            (0xFFFC8124) // (PDC_US2) PDC Transfer Status Register
+#define AT91C_US2_TNCR            (0xFFFC811C) // (PDC_US2) Transmit Next Counter Register
+#define AT91C_US2_RNCR            (0xFFFC8114) // (PDC_US2) Receive Next Counter Register
+#define AT91C_US2_TCR             (0xFFFC810C) // (PDC_US2) Transmit Counter Register
+#define AT91C_US2_PTCR            (0xFFFC8120) // (PDC_US2) PDC Transfer Control Register
+#define AT91C_US2_RCR             (0xFFFC8104) // (PDC_US2) Receive Counter Register
+#define AT91C_US2_TNPR            (0xFFFC8118) // (PDC_US2) Transmit Next Pointer Register
+#define AT91C_US2_RPR             (0xFFFC8100) // (PDC_US2) Receive Pointer Register
+#define AT91C_US2_TPR             (0xFFFC8108) // (PDC_US2) Transmit Pointer Register
+#define AT91C_US2_RNPR            (0xFFFC8110) // (PDC_US2) Receive Next Pointer Register
+// ========== Register definition for US2 peripheral ========== 
+#define AT91C_US2_XXR             (0xFFFC8048) // (US2) XON_XOFF Register
+#define AT91C_US2_FIDI            (0xFFFC8040) // (US2) FI_DI_Ratio Register
+#define AT91C_US2_TTGR            (0xFFFC8028) // (US2) Transmitter Time-guard Register
+#define AT91C_US2_BRGR            (0xFFFC8020) // (US2) Baud Rate Generator Register
+#define AT91C_US2_RHR             (0xFFFC8018) // (US2) Receiver Holding Register
+#define AT91C_US2_IMR             (0xFFFC8010) // (US2) Interrupt Mask Register
+#define AT91C_US2_IER             (0xFFFC8008) // (US2) Interrupt Enable Register
+#define AT91C_US2_CR              (0xFFFC8000) // (US2) Control Register
+#define AT91C_US2_IF              (0xFFFC804C) // (US2) IRDA_FILTER Register
+#define AT91C_US2_NER             (0xFFFC8044) // (US2) Nb Errors Register
+#define AT91C_US2_RTOR            (0xFFFC8024) // (US2) Receiver Time-out Register
+#define AT91C_US2_THR             (0xFFFC801C) // (US2) Transmitter Holding Register
+#define AT91C_US2_CSR             (0xFFFC8014) // (US2) Channel Status Register
+#define AT91C_US2_IDR             (0xFFFC800C) // (US2) Interrupt Disable Register
+#define AT91C_US2_MR              (0xFFFC8004) // (US2) Mode Register
+// ========== Register definition for PDC_US1 peripheral ========== 
+#define AT91C_US1_PTSR            (0xFFFC4124) // (PDC_US1) PDC Transfer Status Register
+#define AT91C_US1_TNCR            (0xFFFC411C) // (PDC_US1) Transmit Next Counter Register
+#define AT91C_US1_RNCR            (0xFFFC4114) // (PDC_US1) Receive Next Counter Register
+#define AT91C_US1_TCR             (0xFFFC410C) // (PDC_US1) Transmit Counter Register
+#define AT91C_US1_RCR             (0xFFFC4104) // (PDC_US1) Receive Counter Register
+#define AT91C_US1_PTCR            (0xFFFC4120) // (PDC_US1) PDC Transfer Control Register
+#define AT91C_US1_TNPR            (0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register
+#define AT91C_US1_RNPR            (0xFFFC4110) // (PDC_US1) Receive Next Pointer Register
+#define AT91C_US1_TPR             (0xFFFC4108) // (PDC_US1) Transmit Pointer Register
+#define AT91C_US1_RPR             (0xFFFC4100) // (PDC_US1) Receive Pointer Register
+// ========== Register definition for US1 peripheral ========== 
+#define AT91C_US1_XXR             (0xFFFC4048) // (US1) XON_XOFF Register
+#define AT91C_US1_RHR             (0xFFFC4018) // (US1) Receiver Holding Register
+#define AT91C_US1_IMR             (0xFFFC4010) // (US1) Interrupt Mask Register
+#define AT91C_US1_IER             (0xFFFC4008) // (US1) Interrupt Enable Register
+#define AT91C_US1_CR              (0xFFFC4000) // (US1) Control Register
+#define AT91C_US1_RTOR            (0xFFFC4024) // (US1) Receiver Time-out Register
+#define AT91C_US1_THR             (0xFFFC401C) // (US1) Transmitter Holding Register
+#define AT91C_US1_CSR             (0xFFFC4014) // (US1) Channel Status Register
+#define AT91C_US1_IDR             (0xFFFC400C) // (US1) Interrupt Disable Register
+#define AT91C_US1_FIDI            (0xFFFC4040) // (US1) FI_DI_Ratio Register
+#define AT91C_US1_BRGR            (0xFFFC4020) // (US1) Baud Rate Generator Register
+#define AT91C_US1_TTGR            (0xFFFC4028) // (US1) Transmitter Time-guard Register
+#define AT91C_US1_IF              (0xFFFC404C) // (US1) IRDA_FILTER Register
+#define AT91C_US1_NER             (0xFFFC4044) // (US1) Nb Errors Register
+#define AT91C_US1_MR              (0xFFFC4004) // (US1) Mode Register
+// ========== Register definition for PDC_US0 peripheral ========== 
+#define AT91C_US0_PTCR            (0xFFFC0120) // (PDC_US0) PDC Transfer Control Register
+#define AT91C_US0_TNPR            (0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register
+#define AT91C_US0_RNPR            (0xFFFC0110) // (PDC_US0) Receive Next Pointer Register
+#define AT91C_US0_TPR             (0xFFFC0108) // (PDC_US0) Transmit Pointer Register
+#define AT91C_US0_RPR             (0xFFFC0100) // (PDC_US0) Receive Pointer Register
+#define AT91C_US0_PTSR            (0xFFFC0124) // (PDC_US0) PDC Transfer Status Register
+#define AT91C_US0_TNCR            (0xFFFC011C) // (PDC_US0) Transmit Next Counter Register
+#define AT91C_US0_RNCR            (0xFFFC0114) // (PDC_US0) Receive Next Counter Register
+#define AT91C_US0_TCR             (0xFFFC010C) // (PDC_US0) Transmit Counter Register
+#define AT91C_US0_RCR             (0xFFFC0104) // (PDC_US0) Receive Counter Register
+// ========== Register definition for US0 peripheral ========== 
+#define AT91C_US0_TTGR            (0xFFFC0028) // (US0) Transmitter Time-guard Register
+#define AT91C_US0_BRGR            (0xFFFC0020) // (US0) Baud Rate Generator Register
+#define AT91C_US0_RHR             (0xFFFC0018) // (US0) Receiver Holding Register
+#define AT91C_US0_IMR             (0xFFFC0010) // (US0) Interrupt Mask Register
+#define AT91C_US0_NER             (0xFFFC0044) // (US0) Nb Errors Register
+#define AT91C_US0_RTOR            (0xFFFC0024) // (US0) Receiver Time-out Register
+#define AT91C_US0_XXR             (0xFFFC0048) // (US0) XON_XOFF Register
+#define AT91C_US0_FIDI            (0xFFFC0040) // (US0) FI_DI_Ratio Register
+#define AT91C_US0_CR              (0xFFFC0000) // (US0) Control Register
+#define AT91C_US0_IER             (0xFFFC0008) // (US0) Interrupt Enable Register
+#define AT91C_US0_IF              (0xFFFC004C) // (US0) IRDA_FILTER Register
+#define AT91C_US0_MR              (0xFFFC0004) // (US0) Mode Register
+#define AT91C_US0_IDR             (0xFFFC000C) // (US0) Interrupt Disable Register
+#define AT91C_US0_CSR             (0xFFFC0014) // (US0) Channel Status Register
+#define AT91C_US0_THR             (0xFFFC001C) // (US0) Transmitter Holding Register
+// ========== Register definition for TWI peripheral ========== 
+#define AT91C_TWI_RHR             (0xFFFB8030) // (TWI) Receive Holding Register
+#define AT91C_TWI_IDR             (0xFFFB8028) // (TWI) Interrupt Disable Register
+#define AT91C_TWI_SR              (0xFFFB8020) // (TWI) Status Register
+#define AT91C_TWI_CWGR            (0xFFFB8010) // (TWI) Clock Waveform Generator Register
+#define AT91C_TWI_SMR             (0xFFFB8008) // (TWI) Slave Mode Register
+#define AT91C_TWI_CR              (0xFFFB8000) // (TWI) Control Register
+#define AT91C_TWI_THR             (0xFFFB8034) // (TWI) Transmit Holding Register
+#define AT91C_TWI_IMR             (0xFFFB802C) // (TWI) Interrupt Mask Register
+#define AT91C_TWI_IER             (0xFFFB8024) // (TWI) Interrupt Enable Register
+#define AT91C_TWI_IADR            (0xFFFB800C) // (TWI) Internal Address Register
+#define AT91C_TWI_MMR             (0xFFFB8004) // (TWI) Master Mode Register
+// ========== Register definition for PDC_MCI peripheral ========== 
+#define AT91C_MCI_PTCR            (0xFFFB4120) // (PDC_MCI) PDC Transfer Control Register
+#define AT91C_MCI_TNPR            (0xFFFB4118) // (PDC_MCI) Transmit Next Pointer Register
+#define AT91C_MCI_RNPR            (0xFFFB4110) // (PDC_MCI) Receive Next Pointer Register
+#define AT91C_MCI_TPR             (0xFFFB4108) // (PDC_MCI) Transmit Pointer Register
+#define AT91C_MCI_RPR             (0xFFFB4100) // (PDC_MCI) Receive Pointer Register
+#define AT91C_MCI_PTSR            (0xFFFB4124) // (PDC_MCI) PDC Transfer Status Register
+#define AT91C_MCI_TNCR            (0xFFFB411C) // (PDC_MCI) Transmit Next Counter Register
+#define AT91C_MCI_RNCR            (0xFFFB4114) // (PDC_MCI) Receive Next Counter Register
+#define AT91C_MCI_TCR             (0xFFFB410C) // (PDC_MCI) Transmit Counter Register
+#define AT91C_MCI_RCR             (0xFFFB4104) // (PDC_MCI) Receive Counter Register
+// ========== Register definition for MCI peripheral ========== 
+#define AT91C_MCI_IDR             (0xFFFB4048) // (MCI) MCI Interrupt Disable Register
+#define AT91C_MCI_SR              (0xFFFB4040) // (MCI) MCI Status Register
+#define AT91C_MCI_RDR             (0xFFFB4030) // (MCI) MCI Receive Data Register
+#define AT91C_MCI_RSPR            (0xFFFB4020) // (MCI) MCI Response Register
+#define AT91C_MCI_ARGR            (0xFFFB4010) // (MCI) MCI Argument Register
+#define AT91C_MCI_DTOR            (0xFFFB4008) // (MCI) MCI Data Timeout Register
+#define AT91C_MCI_CR              (0xFFFB4000) // (MCI) MCI Control Register
+#define AT91C_MCI_IMR             (0xFFFB404C) // (MCI) MCI Interrupt Mask Register
+#define AT91C_MCI_IER             (0xFFFB4044) // (MCI) MCI Interrupt Enable Register
+#define AT91C_MCI_TDR             (0xFFFB4034) // (MCI) MCI Transmit Data Register
+#define AT91C_MCI_CMDR            (0xFFFB4014) // (MCI) MCI Command Register
+#define AT91C_MCI_SDCR            (0xFFFB400C) // (MCI) MCI SD Card Register
+#define AT91C_MCI_MR              (0xFFFB4004) // (MCI) MCI Mode Register
+// ========== Register definition for UDP peripheral ========== 
+#define AT91C_UDP_ISR             (0xFFFB001C) // (UDP) Interrupt Status Register
+#define AT91C_UDP_IDR             (0xFFFB0014) // (UDP) Interrupt Disable Register
+#define AT91C_UDP_GLBSTATE        (0xFFFB0004) // (UDP) Global State Register
+#define AT91C_UDP_FDR             (0xFFFB0050) // (UDP) Endpoint FIFO Data Register
+#define AT91C_UDP_CSR             (0xFFFB0030) // (UDP) Endpoint Control and Status Register
+#define AT91C_UDP_RSTEP           (0xFFFB0028) // (UDP) Reset Endpoint Register
+#define AT91C_UDP_ICR             (0xFFFB0020) // (UDP) Interrupt Clear Register
+#define AT91C_UDP_IMR             (0xFFFB0018) // (UDP) Interrupt Mask Register
+#define AT91C_UDP_IER             (0xFFFB0010) // (UDP) Interrupt Enable Register
+#define AT91C_UDP_FADDR           (0xFFFB0008) // (UDP) Function Address Register
+#define AT91C_UDP_NUM             (0xFFFB0000) // (UDP) Frame Number Register
+// ========== Register definition for TC5 peripheral ========== 
+#define AT91C_TC5_CMR             (0xFFFA4084) // (TC5) Channel Mode Register
+#define AT91C_TC5_IDR             (0xFFFA40A8) // (TC5) Interrupt Disable Register
+#define AT91C_TC5_SR              (0xFFFA40A0) // (TC5) Status Register
+#define AT91C_TC5_RB              (0xFFFA4098) // (TC5) Register B
+#define AT91C_TC5_CV              (0xFFFA4090) // (TC5) Counter Value
+#define AT91C_TC5_CCR             (0xFFFA4080) // (TC5) Channel Control Register
+#define AT91C_TC5_IMR             (0xFFFA40AC) // (TC5) Interrupt Mask Register
+#define AT91C_TC5_IER             (0xFFFA40A4) // (TC5) Interrupt Enable Register
+#define AT91C_TC5_RC              (0xFFFA409C) // (TC5) Register C
+#define AT91C_TC5_RA              (0xFFFA4094) // (TC5) Register A
+// ========== Register definition for TC4 peripheral ========== 
+#define AT91C_TC4_IMR             (0xFFFA406C) // (TC4) Interrupt Mask Register
+#define AT91C_TC4_IER             (0xFFFA4064) // (TC4) Interrupt Enable Register
+#define AT91C_TC4_RC              (0xFFFA405C) // (TC4) Register C
+#define AT91C_TC4_RA              (0xFFFA4054) // (TC4) Register A
+#define AT91C_TC4_CMR             (0xFFFA4044) // (TC4) Channel Mode Register
+#define AT91C_TC4_IDR             (0xFFFA4068) // (TC4) Interrupt Disable Register
+#define AT91C_TC4_SR              (0xFFFA4060) // (TC4) Status Register
+#define AT91C_TC4_RB              (0xFFFA4058) // (TC4) Register B
+#define AT91C_TC4_CV              (0xFFFA4050) // (TC4) Counter Value
+#define AT91C_TC4_CCR             (0xFFFA4040) // (TC4) Channel Control Register
+// ========== Register definition for TC3 peripheral ========== 
+#define AT91C_TC3_IMR             (0xFFFA402C) // (TC3) Interrupt Mask Register
+#define AT91C_TC3_CV              (0xFFFA4010) // (TC3) Counter Value
+#define AT91C_TC3_CCR             (0xFFFA4000) // (TC3) Channel Control Register
+#define AT91C_TC3_IER             (0xFFFA4024) // (TC3) Interrupt Enable Register
+#define AT91C_TC3_CMR             (0xFFFA4004) // (TC3) Channel Mode Register
+#define AT91C_TC3_RA              (0xFFFA4014) // (TC3) Register A
+#define AT91C_TC3_RC              (0xFFFA401C) // (TC3) Register C
+#define AT91C_TC3_IDR             (0xFFFA4028) // (TC3) Interrupt Disable Register
+#define AT91C_TC3_RB              (0xFFFA4018) // (TC3) Register B
+#define AT91C_TC3_SR              (0xFFFA4020) // (TC3) Status Register
+// ========== Register definition for TCB1 peripheral ========== 
+#define AT91C_TCB1_BCR            (0xFFFA4140) // (TCB1) TC Block Control Register
+#define AT91C_TCB1_BMR            (0xFFFA4144) // (TCB1) TC Block Mode Register
+// ========== Register definition for TC2 peripheral ========== 
+#define AT91C_TC2_IMR             (0xFFFA00AC) // (TC2) Interrupt Mask Register
+#define AT91C_TC2_IER             (0xFFFA00A4) // (TC2) Interrupt Enable Register
+#define AT91C_TC2_RC              (0xFFFA009C) // (TC2) Register C
+#define AT91C_TC2_RA              (0xFFFA0094) // (TC2) Register A
+#define AT91C_TC2_CMR             (0xFFFA0084) // (TC2) Channel Mode Register
+#define AT91C_TC2_IDR             (0xFFFA00A8) // (TC2) Interrupt Disable Register
+#define AT91C_TC2_SR              (0xFFFA00A0) // (TC2) Status Register
+#define AT91C_TC2_RB              (0xFFFA0098) // (TC2) Register B
+#define AT91C_TC2_CV              (0xFFFA0090) // (TC2) Counter Value
+#define AT91C_TC2_CCR             (0xFFFA0080) // (TC2) Channel Control Register
+// ========== Register definition for TC1 peripheral ========== 
+#define AT91C_TC1_IMR             (0xFFFA006C) // (TC1) Interrupt Mask Register
+#define AT91C_TC1_IER             (0xFFFA0064) // (TC1) Interrupt Enable Register
+#define AT91C_TC1_RC              (0xFFFA005C) // (TC1) Register C
+#define AT91C_TC1_RA              (0xFFFA0054) // (TC1) Register A
+#define AT91C_TC1_CMR             (0xFFFA0044) // (TC1) Channel Mode Register
+#define AT91C_TC1_IDR             (0xFFFA0068) // (TC1) Interrupt Disable Register
+#define AT91C_TC1_SR              (0xFFFA0060) // (TC1) Status Register
+#define AT91C_TC1_RB              (0xFFFA0058) // (TC1) Register B
+#define AT91C_TC1_CV              (0xFFFA0050) // (TC1) Counter Value
+#define AT91C_TC1_CCR             (0xFFFA0040) // (TC1) Channel Control Register
+// ========== Register definition for TC0 peripheral ========== 
+#define AT91C_TC0_IMR             (0xFFFA002C) // (TC0) Interrupt Mask Register
+#define AT91C_TC0_IER             (0xFFFA0024) // (TC0) Interrupt Enable Register
+#define AT91C_TC0_RC              (0xFFFA001C) // (TC0) Register C
+#define AT91C_TC0_RA              (0xFFFA0014) // (TC0) Register A
+#define AT91C_TC0_CMR             (0xFFFA0004) // (TC0) Channel Mode Register
+#define AT91C_TC0_IDR             (0xFFFA0028) // (TC0) Interrupt Disable Register
+#define AT91C_TC0_SR              (0xFFFA0020) // (TC0) Status Register
+#define AT91C_TC0_RB              (0xFFFA0018) // (TC0) Register B
+#define AT91C_TC0_CV              (0xFFFA0010) // (TC0) Counter Value
+#define AT91C_TC0_CCR             (0xFFFA0000) // (TC0) Channel Control Register
+// ========== Register definition for TCB0 peripheral ========== 
+#define AT91C_TCB0_BMR            (0xFFFA00C4) // (TCB0) TC Block Mode Register
+#define AT91C_TCB0_BCR            (0xFFFA00C0) // (TCB0) TC Block Control Register
+// ========== Register definition for UHP peripheral ========== 
+#define AT91C_UHP_HcRhDescriptorA (0x00300048) // (UHP) Root Hub characteristics A
+#define AT91C_UHP_HcRhPortStatus  (0x00300054) // (UHP) Root Hub Port Status Register
+#define AT91C_UHP_HcRhDescriptorB (0x0030004C) // (UHP) Root Hub characteristics B
+#define AT91C_UHP_HcControl       (0x00300004) // (UHP) Operating modes for the Host Controller
+#define AT91C_UHP_HcInterruptStatus (0x0030000C) // (UHP) Interrupt Status Register
+#define AT91C_UHP_HcRhStatus      (0x00300050) // (UHP) Root Hub Status register
+#define AT91C_UHP_HcRevision      (0x00300000) // (UHP) Revision
+#define AT91C_UHP_HcCommandStatus (0x00300008) // (UHP) Command & status Register
+#define AT91C_UHP_HcInterruptEnable (0x00300010) // (UHP) Interrupt Enable Register
+#define AT91C_UHP_HcHCCA          (0x00300018) // (UHP) Pointer to the Host Controller Communication Area
+#define AT91C_UHP_HcControlHeadED (0x00300020) // (UHP) First Endpoint Descriptor of the Control list
+#define AT91C_UHP_HcInterruptDisable (0x00300014) // (UHP) Interrupt Disable Register
+#define AT91C_UHP_HcPeriodCurrentED (0x0030001C) // (UHP) Current Isochronous or Interrupt Endpoint Descriptor
+#define AT91C_UHP_HcControlCurrentED (0x00300024) // (UHP) Endpoint Control and Status Register
+#define AT91C_UHP_HcBulkCurrentED (0x0030002C) // (UHP) Current endpoint of the Bulk list
+#define AT91C_UHP_HcFmInterval    (0x00300034) // (UHP) Bit time between 2 consecutive SOFs
+#define AT91C_UHP_HcBulkHeadED    (0x00300028) // (UHP) First endpoint register of the Bulk list
+#define AT91C_UHP_HcBulkDoneHead  (0x00300030) // (UHP) Last completed transfer descriptor
+#define AT91C_UHP_HcFmRemaining   (0x00300038) // (UHP) Bit time remaining in the current Frame
+#define AT91C_UHP_HcPeriodicStart (0x00300040) // (UHP) Periodic Start
+#define AT91C_UHP_HcLSThreshold   (0x00300044) // (UHP) LS Threshold
+#define AT91C_UHP_HcFmNumber      (0x0030003C) // (UHP) Frame number
+// ========== Register definition for EMAC peripheral ========== 
+#define AT91C_EMAC_RSR            (0xFFFBC020) // (EMAC) Receive Status Register
+#define AT91C_EMAC_MAN            (0xFFFBC034) // (EMAC) PHY Maintenance Register
+#define AT91C_EMAC_HSH            (0xFFFBC090) // (EMAC) Hash Address High[63:32]
+#define AT91C_EMAC_MCOL           (0xFFFBC048) // (EMAC) Multiple Collision Frame Register
+#define AT91C_EMAC_IER            (0xFFFBC028) // (EMAC) Interrupt Enable Register
+#define AT91C_EMAC_SA2H           (0xFFFBC0A4) // (EMAC) Specific Address 2 High, Last 2 bytes
+#define AT91C_EMAC_HSL            (0xFFFBC094) // (EMAC) Hash Address Low[31:0]
+#define AT91C_EMAC_LCOL           (0xFFFBC05C) // (EMAC) Late Collision Register
+#define AT91C_EMAC_OK             (0xFFFBC04C) // (EMAC) Frames Received OK Register
+#define AT91C_EMAC_CFG            (0xFFFBC004) // (EMAC) Network Configuration Register
+#define AT91C_EMAC_SA3L           (0xFFFBC0A8) // (EMAC) Specific Address 3 Low, First 4 bytes
+#define AT91C_EMAC_SEQE           (0xFFFBC050) // (EMAC) Frame Check Sequence Error Register
+#define AT91C_EMAC_ECOL           (0xFFFBC060) // (EMAC) Excessive Collision Register
+#define AT91C_EMAC_ELR            (0xFFFBC070) // (EMAC) Excessive Length Error Register
+#define AT91C_EMAC_SR             (0xFFFBC008) // (EMAC) Network Status Register
+#define AT91C_EMAC_RBQP           (0xFFFBC018) // (EMAC) Receive Buffer Queue Pointer
+#define AT91C_EMAC_CSE            (0xFFFBC064) // (EMAC) Carrier Sense Error Register
+#define AT91C_EMAC_RJB            (0xFFFBC074) // (EMAC) Receive Jabber Register
+#define AT91C_EMAC_USF            (0xFFFBC078) // (EMAC) Undersize Frame Register
+#define AT91C_EMAC_IDR            (0xFFFBC02C) // (EMAC) Interrupt Disable Register
+#define AT91C_EMAC_SA1L           (0xFFFBC098) // (EMAC) Specific Address 1 Low, First 4 bytes
+#define AT91C_EMAC_IMR            (0xFFFBC030) // (EMAC) Interrupt Mask Register
+#define AT91C_EMAC_FRA            (0xFFFBC040) // (EMAC) Frames Transmitted OK Register
+#define AT91C_EMAC_SA3H           (0xFFFBC0AC) // (EMAC) Specific Address 3 High, Last 2 bytes
+#define AT91C_EMAC_SA1H           (0xFFFBC09C) // (EMAC) Specific Address 1 High, Last 2 bytes
+#define AT91C_EMAC_SCOL           (0xFFFBC044) // (EMAC) Single Collision Frame Register
+#define AT91C_EMAC_ALE            (0xFFFBC054) // (EMAC) Alignment Error Register
+#define AT91C_EMAC_TAR            (0xFFFBC00C) // (EMAC) Transmit Address Register
+#define AT91C_EMAC_SA4L           (0xFFFBC0B0) // (EMAC) Specific Address 4 Low, First 4 bytes
+#define AT91C_EMAC_SA2L           (0xFFFBC0A0) // (EMAC) Specific Address 2 Low, First 4 bytes
+#define AT91C_EMAC_TUE            (0xFFFBC068) // (EMAC) Transmit Underrun Error Register
+#define AT91C_EMAC_DTE            (0xFFFBC058) // (EMAC) Deferred Transmission Frame Register
+#define AT91C_EMAC_TCR            (0xFFFBC010) // (EMAC) Transmit Control Register
+#define AT91C_EMAC_CTL            (0xFFFBC000) // (EMAC) Network Control Register
+#define AT91C_EMAC_SA4H           (0xFFFBC0B4) // (EMAC) Specific Address 4 High, Last 2 bytesr
+#define AT91C_EMAC_CDE            (0xFFFBC06C) // (EMAC) Code Error Register
+#define AT91C_EMAC_SQEE           (0xFFFBC07C) // (EMAC) SQE Test Error Register
+#define AT91C_EMAC_TSR            (0xFFFBC014) // (EMAC) Transmit Status Register
+#define AT91C_EMAC_DRFC           (0xFFFBC080) // (EMAC) Discarded RX Frame Register
+// ========== Register definition for EBI peripheral ========== 
+#define AT91C_EBI_CFGR            (0xFFFFFF64) // (EBI) Configuration Register
+#define AT91C_EBI_CSA             (0xFFFFFF60) // (EBI) Chip Select Assignment Register
+// ========== Register definition for SMC2 peripheral ========== 
+#define AT91C_SMC2_CSR            (0xFFFFFF70) // (SMC2) SMC2 Chip Select Register
+// ========== Register definition for SDRC peripheral ========== 
+#define AT91C_SDRC_IMR            (0xFFFFFFAC) // (SDRC) SDRAM Controller Interrupt Mask Register
+#define AT91C_SDRC_IER            (0xFFFFFFA4) // (SDRC) SDRAM Controller Interrupt Enable Register
+#define AT91C_SDRC_SRR            (0xFFFFFF9C) // (SDRC) SDRAM Controller Self Refresh Register
+#define AT91C_SDRC_TR             (0xFFFFFF94) // (SDRC) SDRAM Controller Refresh Timer Register
+#define AT91C_SDRC_ISR            (0xFFFFFFB0) // (SDRC) SDRAM Controller Interrupt Mask Register
+#define AT91C_SDRC_IDR            (0xFFFFFFA8) // (SDRC) SDRAM Controller Interrupt Disable Register
+#define AT91C_SDRC_LPR            (0xFFFFFFA0) // (SDRC) SDRAM Controller Low Power Register
+#define AT91C_SDRC_CR             (0xFFFFFF98) // (SDRC) SDRAM Controller Configuration Register
+#define AT91C_SDRC_MR             (0xFFFFFF90) // (SDRC) SDRAM Controller Mode Register
+// ========== Register definition for BFC peripheral ========== 
+#define AT91C_BFC_MR              (0xFFFFFFC0) // (BFC) BFC Mode Register
+
+// *****************************************************************************
+//               PIO DEFINITIONS FOR AT91RM9200
+// *****************************************************************************
+#define AT91C_PIO_PA0             (1 <<  0) // Pin Controlled by PA0
+#define AT91C_PA0_MISO            (AT91C_PIO_PA0) //  SPI Master In Slave
+#define AT91C_PA0_PCK3            (AT91C_PIO_PA0) //  PMC Programmable Clock Output 3
+#define AT91C_PIO_PA1             (1 <<  1) // Pin Controlled by PA1
+#define AT91C_PA1_MOSI            (AT91C_PIO_PA1) //  SPI Master Out Slave
+#define AT91C_PA1_PCK0            (AT91C_PIO_PA1) //  PMC Programmable Clock Output 0
+#define AT91C_PIO_PA10            (1 << 10) // Pin Controlled by PA10
+#define AT91C_PA10_ETX1           (AT91C_PIO_PA10) //  Ethernet MAC Transmit Data 1
+#define AT91C_PA10_MCDB1          (AT91C_PIO_PA10) //  Multimedia Card B Data 1
+#define AT91C_PIO_PA11            (1 << 11) // Pin Controlled by PA11
+#define AT91C_PA11_ECRS_ECRSDV    (AT91C_PIO_PA11) //  Ethernet MAC Carrier Sense/Carrier Sense and Data Valid
+#define AT91C_PA11_MCDB2          (AT91C_PIO_PA11) //  Multimedia Card B Data 2
+#define AT91C_PIO_PA12            (1 << 12) // Pin Controlled by PA12
+#define AT91C_PA12_ERX0           (AT91C_PIO_PA12) //  Ethernet MAC Receive Data 0
+#define AT91C_PA12_MCDB3          (AT91C_PIO_PA12) //  Multimedia Card B Data 3
+#define AT91C_PIO_PA13            (1 << 13) // Pin Controlled by PA13
+#define AT91C_PA13_ERX1           (AT91C_PIO_PA13) //  Ethernet MAC Receive Data 1
+#define AT91C_PA13_TCLK0          (AT91C_PIO_PA13) //  Timer Counter 0 external clock input
+#define AT91C_PIO_PA14            (1 << 14) // Pin Controlled by PA14
+#define AT91C_PA14_ERXER          (AT91C_PIO_PA14) //  Ethernet MAC Receive Error
+#define AT91C_PA14_TCLK1          (AT91C_PIO_PA14) //  Timer Counter 1 external clock input
+#define AT91C_PIO_PA15            (1 << 15) // Pin Controlled by PA15
+#define AT91C_PA15_EMDC           (AT91C_PIO_PA15) //  Ethernet MAC Management Data Clock
+#define AT91C_PA15_TCLK2          (AT91C_PIO_PA15) //  Timer Counter 2 external clock input
+#define AT91C_PIO_PA16            (1 << 16) // Pin Controlled by PA16
+#define AT91C_PA16_EMDIO          (AT91C_PIO_PA16) //  Ethernet MAC Management Data Input/Output
+#define AT91C_PA16_IRQ6           (AT91C_PIO_PA16) //  AIC Interrupt input 6
+#define AT91C_PIO_PA17            (1 << 17) // Pin Controlled by PA17
+#define AT91C_PA17_TXD0           (AT91C_PIO_PA17) //  USART 0 Transmit Data
+#define AT91C_PA17_TIOA0          (AT91C_PIO_PA17) //  Timer Counter 0 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PA18            (1 << 18) // Pin Controlled by PA18
+#define AT91C_PA18_RXD0           (AT91C_PIO_PA18) //  USART 0 Receive Data
+#define AT91C_PA18_TIOB0          (AT91C_PIO_PA18) //  Timer Counter 0 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PA19            (1 << 19) // Pin Controlled by PA19
+#define AT91C_PA19_SCK0           (AT91C_PIO_PA19) //  USART 0 Serial Clock
+#define AT91C_PA19_TIOA1          (AT91C_PIO_PA19) //  Timer Counter 1 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PA2             (1 <<  2) // Pin Controlled by PA2
+#define AT91C_PA2_SPCK            (AT91C_PIO_PA2) //  SPI Serial Clock
+#define AT91C_PA2_IRQ4            (AT91C_PIO_PA2) //  AIC Interrupt Input 4
+#define AT91C_PIO_PA20            (1 << 20) // Pin Controlled by PA20
+#define AT91C_PA20_CTS0           (AT91C_PIO_PA20) //  USART 0 Clear To Send
+#define AT91C_PA20_TIOB1          (AT91C_PIO_PA20) //  Timer Counter 1 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PA21            (1 << 21) // Pin Controlled by PA21
+#define AT91C_PA21_RTS0           (AT91C_PIO_PA21) //  Usart 0 Ready To Send
+#define AT91C_PA21_TIOA2          (AT91C_PIO_PA21) //  Timer Counter 2 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PA22            (1 << 22) // Pin Controlled by PA22
+#define AT91C_PA22_RXD2           (AT91C_PIO_PA22) //  USART 2 Receive Data
+#define AT91C_PA22_TIOB2          (AT91C_PIO_PA22) //  Timer Counter 2 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PA23            (1 << 23) // Pin Controlled by PA23
+#define AT91C_PA23_TXD2           (AT91C_PIO_PA23) //  USART 2 Transmit Data
+#define AT91C_PA23_IRQ3           (AT91C_PIO_PA23) //  Interrupt input 3
+#define AT91C_PIO_PA24            (1 << 24) // Pin Controlled by PA24
+#define AT91C_PA24_SCK2           (AT91C_PIO_PA24) //  USART2 Serial Clock
+#define AT91C_PA24_PCK1           (AT91C_PIO_PA24) //  PMC Programmable Clock Output 1
+#define AT91C_PIO_PA25            (1 << 25) // Pin Controlled by PA25
+#define AT91C_PA25_TWD            (AT91C_PIO_PA25) //  TWI Two-wire Serial Data
+#define AT91C_PA25_IRQ2           (AT91C_PIO_PA25) //  Interrupt input 2
+#define AT91C_PIO_PA26            (1 << 26) // Pin Controlled by PA26
+#define AT91C_PA26_TWCK           (AT91C_PIO_PA26) //  TWI Two-wire Serial Clock
+#define AT91C_PA26_IRQ1           (AT91C_PIO_PA26) //  Interrupt input 1
+#define AT91C_PIO_PA27            (1 << 27) // Pin Controlled by PA27
+#define AT91C_PA27_MCCK           (AT91C_PIO_PA27) //  Multimedia Card Clock
+#define AT91C_PA27_TCLK3          (AT91C_PIO_PA27) //  Timer Counter 3 External Clock Input
+#define AT91C_PIO_PA28            (1 << 28) // Pin Controlled by PA28
+#define AT91C_PA28_MCCDA          (AT91C_PIO_PA28) //  Multimedia Card A Command
+#define AT91C_PA28_TCLK4          (AT91C_PIO_PA28) //  Timer Counter 4 external Clock Input
+#define AT91C_PIO_PA29            (1 << 29) // Pin Controlled by PA29
+#define AT91C_PA29_MCDA0          (AT91C_PIO_PA29) //  Multimedia Card A Data 0
+#define AT91C_PA29_TCLK5          (AT91C_PIO_PA29) //  Timer Counter 5 external clock input
+#define AT91C_PIO_PA3             (1 <<  3) // Pin Controlled by PA3
+#define AT91C_PA3_NPCS0           (AT91C_PIO_PA3) //  SPI Peripheral Chip Select 0
+#define AT91C_PA3_IRQ5            (AT91C_PIO_PA3) //  AIC Interrupt Input 5
+#define AT91C_PIO_PA30            (1 << 30) // Pin Controlled by PA30
+#define AT91C_PA30_DRXD           (AT91C_PIO_PA30) //  DBGU Debug Receive Data
+#define AT91C_PA30_CTS2           (AT91C_PIO_PA30) //  Usart 2 Clear To Send
+#define AT91C_PIO_PA31            (1 << 31) // Pin Controlled by PA31
+#define AT91C_PA31_DTXD           (AT91C_PIO_PA31) //  DBGU Debug Transmit Data
+#define AT91C_PA31_RTS2           (AT91C_PIO_PA31) //  USART 2 Ready To Send
+#define AT91C_PIO_PA4             (1 <<  4) // Pin Controlled by PA4
+#define AT91C_PA4_NPCS1           (AT91C_PIO_PA4) //  SPI Peripheral Chip Select 1
+#define AT91C_PA4_PCK1            (AT91C_PIO_PA4) //  PMC Programmable Clock Output 1
+#define AT91C_PIO_PA5             (1 <<  5) // Pin Controlled by PA5
+#define AT91C_PA5_NPCS2           (AT91C_PIO_PA5) //  SPI Peripheral Chip Select 2
+#define AT91C_PA5_TXD3            (AT91C_PIO_PA5) //  USART 3 Transmit Data
+#define AT91C_PIO_PA6             (1 <<  6) // Pin Controlled by PA6
+#define AT91C_PA6_NPCS3           (AT91C_PIO_PA6) //  SPI Peripheral Chip Select 3
+#define AT91C_PA6_RXD3            (AT91C_PIO_PA6) //  USART 3 Receive Data
+#define AT91C_PIO_PA7             (1 <<  7) // Pin Controlled by PA7
+#define AT91C_PA7_ETXCK_EREFCK    (AT91C_PIO_PA7) //  Ethernet MAC Transmit Clock/Reference Clock
+#define AT91C_PA7_PCK2            (AT91C_PIO_PA7) //  PMC Programmable Clock 2
+#define AT91C_PIO_PA8             (1 <<  8) // Pin Controlled by PA8
+#define AT91C_PA8_ETXEN           (AT91C_PIO_PA8) //  Ethernet MAC Transmit Enable
+#define AT91C_PA8_MCCDB           (AT91C_PIO_PA8) //  Multimedia Card B Command
+#define AT91C_PIO_PA9             (1 <<  9) // Pin Controlled by PA9
+#define AT91C_PA9_ETX0            (AT91C_PIO_PA9) //  Ethernet MAC Transmit Data 0
+#define AT91C_PA9_MCDB0           (AT91C_PIO_PA9) //  Multimedia Card B Data 0
+#define AT91C_PIO_PB0             (1 <<  0) // Pin Controlled by PB0
+#define AT91C_PB0_TF0             (AT91C_PIO_PB0) //  SSC Transmit Frame Sync 0
+#define AT91C_PB0_TIOB3           (AT91C_PIO_PB0) //  Timer Counter 3 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PB1             (1 <<  1) // Pin Controlled by PB1
+#define AT91C_PB1_TK0             (AT91C_PIO_PB1) //  SSC Transmit Clock 0
+#define AT91C_PB1_CTS3            (AT91C_PIO_PB1) //  USART 3 Clear To Send
+#define AT91C_PIO_PB10            (1 << 10) // Pin Controlled by PB10
+#define AT91C_PB10_RK1            (AT91C_PIO_PB10) //  SSC Receive Clock 1
+#define AT91C_PB10_TIOA5          (AT91C_PIO_PB10) //  Timer Counter 5 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PB11            (1 << 11) // Pin Controlled by PB11
+#define AT91C_PB11_RF1            (AT91C_PIO_PB11) //  SSC Receive Frame Sync 1
+#define AT91C_PB11_TIOB5          (AT91C_PIO_PB11) //  Timer Counter 5 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PB12            (1 << 12) // Pin Controlled by PB12
+#define AT91C_PB12_TF2            (AT91C_PIO_PB12) //  SSC Transmit Frame Sync 2
+#define AT91C_PB12_ETX2           (AT91C_PIO_PB12) //  Ethernet MAC Transmit Data 2
+#define AT91C_PIO_PB13            (1 << 13) // Pin Controlled by PB13
+#define AT91C_PB13_TK2            (AT91C_PIO_PB13) //  SSC Transmit Clock 2
+#define AT91C_PB13_ETX3           (AT91C_PIO_PB13) //  Ethernet MAC Transmit Data 3
+#define AT91C_PIO_PB14            (1 << 14) // Pin Controlled by PB14
+#define AT91C_PB14_TD2            (AT91C_PIO_PB14) //  SSC Transmit Data 2
+#define AT91C_PB14_ETXER          (AT91C_PIO_PB14) //  Ethernet MAC Transmikt Coding Error
+#define AT91C_PIO_PB15            (1 << 15) // Pin Controlled by PB15
+#define AT91C_PB15_RD2            (AT91C_PIO_PB15) //  SSC Receive Data 2
+#define AT91C_PB15_ERX2           (AT91C_PIO_PB15) //  Ethernet MAC Receive Data 2
+#define AT91C_PIO_PB16            (1 << 16) // Pin Controlled by PB16
+#define AT91C_PB16_RK2            (AT91C_PIO_PB16) //  SSC Receive Clock 2
+#define AT91C_PB16_ERX3           (AT91C_PIO_PB16) //  Ethernet MAC Receive Data 3
+#define AT91C_PIO_PB17            (1 << 17) // Pin Controlled by PB17
+#define AT91C_PB17_RF2            (AT91C_PIO_PB17) //  SSC Receive Frame Sync 2
+#define AT91C_PB17_ERXDV          (AT91C_PIO_PB17) //  Ethernet MAC Receive Data Valid
+#define AT91C_PIO_PB18            (1 << 18) // Pin Controlled by PB18
+#define AT91C_PB18_RI1            (AT91C_PIO_PB18) //  USART 1 Ring Indicator
+#define AT91C_PB18_ECOL           (AT91C_PIO_PB18) //  Ethernet MAC Collision Detected
+#define AT91C_PIO_PB19            (1 << 19) // Pin Controlled by PB19
+#define AT91C_PB19_DTR1           (AT91C_PIO_PB19) //  USART 1 Data Terminal ready
+#define AT91C_PB19_ERXCK          (AT91C_PIO_PB19) //  Ethernet MAC Receive Clock
+#define AT91C_PIO_PB2             (1 <<  2) // Pin Controlled by PB2
+#define AT91C_PB2_TD0             (AT91C_PIO_PB2) //  SSC Transmit data
+#define AT91C_PB2_SCK3            (AT91C_PIO_PB2) //  USART 3 Serial Clock
+#define AT91C_PIO_PB20            (1 << 20) // Pin Controlled by PB20
+#define AT91C_PB20_TXD1           (AT91C_PIO_PB20) //  USART 1 Transmit Data
+#define AT91C_PIO_PB21            (1 << 21) // Pin Controlled by PB21
+#define AT91C_PB21_RXD1           (AT91C_PIO_PB21) //  USART 1 Receive Data
+#define AT91C_PIO_PB22            (1 << 22) // Pin Controlled by PB22
+#define AT91C_PB22_SCK1           (AT91C_PIO_PB22) //  USART1 Serial Clock
+#define AT91C_PIO_PB23            (1 << 23) // Pin Controlled by PB23
+#define AT91C_PB23_DCD1           (AT91C_PIO_PB23) //  USART 1 Data Carrier Detect
+#define AT91C_PIO_PB24            (1 << 24) // Pin Controlled by PB24
+#define AT91C_PB24_CTS1           (AT91C_PIO_PB24) //  USART 1 Clear To Send
+#define AT91C_PIO_PB25            (1 << 25) // Pin Controlled by PB25
+#define AT91C_PB25_DSR1           (AT91C_PIO_PB25) //  USART 1 Data Set ready
+#define AT91C_PB25_EF100          (AT91C_PIO_PB25) //  Ethernet MAC Force 100 Mbits/sec
+#define AT91C_PIO_PB26            (1 << 26) // Pin Controlled by PB26
+#define AT91C_PB26_RTS1           (AT91C_PIO_PB26) //  Usart 0 Ready To Send
+#define AT91C_PIO_PB27            (1 << 27) // Pin Controlled by PB27
+#define AT91C_PB27_PCK0           (AT91C_PIO_PB27) //  PMC Programmable Clock Output 0
+#define AT91C_PIO_PB28            (1 << 28) // Pin Controlled by PB28
+#define AT91C_PB28_FIQ            (AT91C_PIO_PB28) //  AIC Fast Interrupt Input
+#define AT91C_PIO_PB29            (1 << 29) // Pin Controlled by PB29
+#define AT91C_PB29_IRQ0           (AT91C_PIO_PB29) //  Interrupt input 0
+#define AT91C_PIO_PB3             (1 <<  3) // Pin Controlled by PB3
+#define AT91C_PB3_RD0             (AT91C_PIO_PB3) //  SSC Receive Data
+#define AT91C_PB3_MCDA1           (AT91C_PIO_PB3) //  Multimedia Card A Data 1
+#define AT91C_PIO_PB4             (1 <<  4) // Pin Controlled by PB4
+#define AT91C_PB4_RK0             (AT91C_PIO_PB4) //  SSC Receive Clock
+#define AT91C_PB4_MCDA2           (AT91C_PIO_PB4) //  Multimedia Card A Data 2
+#define AT91C_PIO_PB5             (1 <<  5) // Pin Controlled by PB5
+#define AT91C_PB5_RF0             (AT91C_PIO_PB5) //  SSC Receive Frame Sync 0
+#define AT91C_PB5_MCDA3           (AT91C_PIO_PB5) //  Multimedia Card A Data 3
+#define AT91C_PIO_PB6             (1 <<  6) // Pin Controlled by PB6
+#define AT91C_PB6_TF1             (AT91C_PIO_PB6) //  SSC Transmit Frame Sync 1
+#define AT91C_PB6_TIOA3           (AT91C_PIO_PB6) //  Timer Counter 4 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PB7             (1 <<  7) // Pin Controlled by PB7
+#define AT91C_PB7_TK1             (AT91C_PIO_PB7) //  SSC Transmit Clock 1
+#define AT91C_PB7_TIOB3           (AT91C_PIO_PB7) //  Timer Counter 3 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PB8             (1 <<  8) // Pin Controlled by PB8
+#define AT91C_PB8_TD1             (AT91C_PIO_PB8) //  SSC Transmit Data 1
+#define AT91C_PB8_TIOA4           (AT91C_PIO_PB8) //  Timer Counter 4 Multipurpose Timer I/O Pin A
+#define AT91C_PIO_PB9             (1 <<  9) // Pin Controlled by PB9
+#define AT91C_PB9_RD1             (AT91C_PIO_PB9) //  SSC Receive Data 1
+#define AT91C_PB9_TIOB4           (AT91C_PIO_PB9) //  Timer Counter 4 Multipurpose Timer I/O Pin B
+#define AT91C_PIO_PC0             (1 <<  0) // Pin Controlled by PC0
+#define AT91C_PC0_BFCK            (AT91C_PIO_PC0) //  Burst Flash Clock
+#define AT91C_PIO_PC1             (1 <<  1) // Pin Controlled by PC1
+#define AT91C_PC1_BFRDY_SMOE      (AT91C_PIO_PC1) //  Burst Flash Ready
+#define AT91C_PIO_PC10            (1 << 10) // Pin Controlled by PC10
+#define AT91C_PC10_NCS4_CFCS      (AT91C_PIO_PC10) //  Compact Flash Chip Select
+#define AT91C_PIO_PC11            (1 << 11) // Pin Controlled by PC11
+#define AT91C_PC11_NCS5_CFCE1     (AT91C_PIO_PC11) //  Chip Select 5 / Compact Flash Chip Enable 1
+#define AT91C_PIO_PC12            (1 << 12) // Pin Controlled by PC12
+#define AT91C_PC12_NCS6_CFCE2     (AT91C_PIO_PC12) //  Chip Select 6 / Compact Flash Chip Enable 2
+#define AT91C_PIO_PC13            (1 << 13) // Pin Controlled by PC13
+#define AT91C_PC13_NCS7           (AT91C_PIO_PC13) //  Chip Select 7
+#define AT91C_PIO_PC14            (1 << 14) // Pin Controlled by PC14
+#define AT91C_PIO_PC15            (1 << 15) // Pin Controlled by PC15
+#define AT91C_PIO_PC16            (1 << 16) // Pin Controlled by PC16
+#define AT91C_PC16_D16            (AT91C_PIO_PC16) //  Data Bus [16]
+#define AT91C_PIO_PC17            (1 << 17) // Pin Controlled by PC17
+#define AT91C_PC17_D17            (AT91C_PIO_PC17) //  Data Bus [17]
+#define AT91C_PIO_PC18            (1 << 18) // Pin Controlled by PC18
+#define AT91C_PC18_D18            (AT91C_PIO_PC18) //  Data Bus [18]
+#define AT91C_PIO_PC19            (1 << 19) // Pin Controlled by PC19
+#define AT91C_PC19_D19            (AT91C_PIO_PC19) //  Data Bus [19]
+#define AT91C_PIO_PC2             (1 <<  2) // Pin Controlled by PC2
+#define AT91C_PC2_BFAVD           (AT91C_PIO_PC2) //  Burst Flash Address Valid
+#define AT91C_PIO_PC20            (1 << 20) // Pin Controlled by PC20
+#define AT91C_PC20_D20            (AT91C_PIO_PC20) //  Data Bus [20]
+#define AT91C_PIO_PC21            (1 << 21) // Pin Controlled by PC21
+#define AT91C_PC21_D21            (AT91C_PIO_PC21) //  Data Bus [21]
+#define AT91C_PIO_PC22            (1 << 22) // Pin Controlled by PC22
+#define AT91C_PC22_D22            (AT91C_PIO_PC22) //  Data Bus [22]
+#define AT91C_PIO_PC23            (1 << 23) // Pin Controlled by PC23
+#define AT91C_PC23_D23            (AT91C_PIO_PC23) //  Data Bus [23]
+#define AT91C_PIO_PC24            (1 << 24) // Pin Controlled by PC24
+#define AT91C_PC24_D24            (AT91C_PIO_PC24) //  Data Bus [24]
+#define AT91C_PIO_PC25            (1 << 25) // Pin Controlled by PC25
+#define AT91C_PC25_D25            (AT91C_PIO_PC25) //  Data Bus [25]
+#define AT91C_PIO_PC26            (1 << 26) // Pin Controlled by PC26
+#define AT91C_PC26_D26            (AT91C_PIO_PC26) //  Data Bus [26]
+#define AT91C_PIO_PC27            (1 << 27) // Pin Controlled by PC27
+#define AT91C_PC27_D27            (AT91C_PIO_PC27) //  Data Bus [27]
+#define AT91C_PIO_PC28            (1 << 28) // Pin Controlled by PC28
+#define AT91C_PC28_D28            (AT91C_PIO_PC28) //  Data Bus [28]
+#define AT91C_PIO_PC29            (1 << 29) // Pin Controlled by PC29
+#define AT91C_PC29_D29            (AT91C_PIO_PC29) //  Data Bus [29]
+#define AT91C_PIO_PC3             (1 <<  3) // Pin Controlled by PC3
+#define AT91C_PC3_BFBAA_SMWE      (AT91C_PIO_PC3) //  Burst Flash Address Advance / SmartMedia Write Enable
+#define AT91C_PIO_PC30            (1 << 30) // Pin Controlled by PC30
+#define AT91C_PC30_D30            (AT91C_PIO_PC30) //  Data Bus [30]
+#define AT91C_PIO_PC31            (1 << 31) // Pin Controlled by PC31
+#define AT91C_PC31_D31            (AT91C_PIO_PC31) //  Data Bus [31]
+#define AT91C_PIO_PC4             (1 <<  4) // Pin Controlled by PC4
+#define AT91C_PC4_BFOE            (AT91C_PIO_PC4) //  Burst Flash Output Enable
+#define AT91C_PIO_PC5             (1 <<  5) // Pin Controlled by PC5
+#define AT91C_PC5_BFWE            (AT91C_PIO_PC5) //  Burst Flash Write Enable
+#define AT91C_PIO_PC6             (1 <<  6) // Pin Controlled by PC6
+#define AT91C_PC6_NWAIT           (AT91C_PIO_PC6) //  NWAIT
+#define AT91C_PIO_PC7             (1 <<  7) // Pin Controlled by PC7
+#define AT91C_PC7_A23             (AT91C_PIO_PC7) //  Address Bus[23]
+#define AT91C_PIO_PC8             (1 <<  8) // Pin Controlled by PC8
+#define AT91C_PC8_A24             (AT91C_PIO_PC8) //  Address Bus[24]
+#define AT91C_PIO_PC9             (1 <<  9) // Pin Controlled by PC9
+#define AT91C_PC9_A25_CFRNW       (AT91C_PIO_PC9) //  Address Bus[25] /  Compact Flash Read Not Write
+#define AT91C_PIO_PD0             (1 <<  0) // Pin Controlled by PD0
+#define AT91C_PD0_ETX0            (AT91C_PIO_PD0) //  Ethernet MAC Transmit Data 0
+#define AT91C_PIO_PD1             (1 <<  1) // Pin Controlled by PD1
+#define AT91C_PD1_ETX1            (AT91C_PIO_PD1) //  Ethernet MAC Transmit Data 1
+#define AT91C_PIO_PD10            (1 << 10) // Pin Controlled by PD10
+#define AT91C_PD10_PCK3           (AT91C_PIO_PD10) //  PMC Programmable Clock Output 3
+#define AT91C_PD10_TPS1           (AT91C_PIO_PD10) //  ETM ARM9 pipeline status 1
+#define AT91C_PIO_PD11            (1 << 11) // Pin Controlled by PD11
+#define AT91C_PD11_               (AT91C_PIO_PD11) //  
+#define AT91C_PD11_TPS2           (AT91C_PIO_PD11) //  ETM ARM9 pipeline status 2
+#define AT91C_PIO_PD12            (1 << 12) // Pin Controlled by PD12
+#define AT91C_PD12_               (AT91C_PIO_PD12) //  
+#define AT91C_PD12_TPK0           (AT91C_PIO_PD12) //  ETM Trace Packet 0
+#define AT91C_PIO_PD13            (1 << 13) // Pin Controlled by PD13
+#define AT91C_PD13_               (AT91C_PIO_PD13) //  
+#define AT91C_PD13_TPK1           (AT91C_PIO_PD13) //  ETM Trace Packet 1
+#define AT91C_PIO_PD14            (1 << 14) // Pin Controlled by PD14
+#define AT91C_PD14_               (AT91C_PIO_PD14) //  
+#define AT91C_PD14_TPK2           (AT91C_PIO_PD14) //  ETM Trace Packet 2
+#define AT91C_PIO_PD15            (1 << 15) // Pin Controlled by PD15
+#define AT91C_PD15_TD0            (AT91C_PIO_PD15) //  SSC Transmit data
+#define AT91C_PD15_TPK3           (AT91C_PIO_PD15) //  ETM Trace Packet 3
+#define AT91C_PIO_PD16            (1 << 16) // Pin Controlled by PD16
+#define AT91C_PD16_TD1            (AT91C_PIO_PD16) //  SSC Transmit Data 1
+#define AT91C_PD16_TPK4           (AT91C_PIO_PD16) //  ETM Trace Packet 4
+#define AT91C_PIO_PD17            (1 << 17) // Pin Controlled by PD17
+#define AT91C_PD17_TD2            (AT91C_PIO_PD17) //  SSC Transmit Data 2
+#define AT91C_PD17_TPK5           (AT91C_PIO_PD17) //  ETM Trace Packet 5
+#define AT91C_PIO_PD18            (1 << 18) // Pin Controlled by PD18
+#define AT91C_PD18_NPCS1          (AT91C_PIO_PD18) //  SPI Peripheral Chip Select 1
+#define AT91C_PD18_TPK6           (AT91C_PIO_PD18) //  ETM Trace Packet 6
+#define AT91C_PIO_PD19            (1 << 19) // Pin Controlled by PD19
+#define AT91C_PD19_NPCS2          (AT91C_PIO_PD19) //  SPI Peripheral Chip Select 2
+#define AT91C_PD19_TPK7           (AT91C_PIO_PD19) //  ETM Trace Packet 7
+#define AT91C_PIO_PD2             (1 <<  2) // Pin Controlled by PD2
+#define AT91C_PD2_ETX2            (AT91C_PIO_PD2) //  Ethernet MAC Transmit Data 2
+#define AT91C_PIO_PD20            (1 << 20) // Pin Controlled by PD20
+#define AT91C_PD20_NPCS3          (AT91C_PIO_PD20) //  SPI Peripheral Chip Select 3
+#define AT91C_PD20_TPK8           (AT91C_PIO_PD20) //  ETM Trace Packet 8
+#define AT91C_PIO_PD21            (1 << 21) // Pin Controlled by PD21
+#define AT91C_PD21_RTS0           (AT91C_PIO_PD21) //  Usart 0 Ready To Send
+#define AT91C_PD21_TPK9           (AT91C_PIO_PD21) //  ETM Trace Packet 9
+#define AT91C_PIO_PD22            (1 << 22) // Pin Controlled by PD22
+#define AT91C_PD22_RTS1           (AT91C_PIO_PD22) //  Usart 0 Ready To Send
+#define AT91C_PD22_TPK10          (AT91C_PIO_PD22) //  ETM Trace Packet 10
+#define AT91C_PIO_PD23            (1 << 23) // Pin Controlled by PD23
+#define AT91C_PD23_RTS2           (AT91C_PIO_PD23) //  USART 2 Ready To Send
+#define AT91C_PD23_TPK11          (AT91C_PIO_PD23) //  ETM Trace Packet 11
+#define AT91C_PIO_PD24            (1 << 24) // Pin Controlled by PD24
+#define AT91C_PD24_RTS3           (AT91C_PIO_PD24) //  USART 3 Ready To Send
+#define AT91C_PD24_TPK12          (AT91C_PIO_PD24) //  ETM Trace Packet 12
+#define AT91C_PIO_PD25            (1 << 25) // Pin Controlled by PD25
+#define AT91C_PD25_DTR1           (AT91C_PIO_PD25) //  USART 1 Data Terminal ready
+#define AT91C_PD25_TPK13          (AT91C_PIO_PD25) //  ETM Trace Packet 13
+#define AT91C_PIO_PD26            (1 << 26) // Pin Controlled by PD26
+#define AT91C_PD26_TPK14          (AT91C_PIO_PD26) //  ETM Trace Packet 14
+#define AT91C_PIO_PD27            (1 << 27) // Pin Controlled by PD27
+#define AT91C_PD27_TPK15          (AT91C_PIO_PD27) //  ETM Trace Packet 15
+#define AT91C_PIO_PD3             (1 <<  3) // Pin Controlled by PD3
+#define AT91C_PD3_ETX3            (AT91C_PIO_PD3) //  Ethernet MAC Transmit Data 3
+#define AT91C_PIO_PD4             (1 <<  4) // Pin Controlled by PD4
+#define AT91C_PD4_ETXEN           (AT91C_PIO_PD4) //  Ethernet MAC Transmit Enable
+#define AT91C_PIO_PD5             (1 <<  5) // Pin Controlled by PD5
+#define AT91C_PD5_ETXER           (AT91C_PIO_PD5) //  Ethernet MAC Transmikt Coding Error
+#define AT91C_PIO_PD6             (1 <<  6) // Pin Controlled by PD6
+#define AT91C_PD6_DTXD            (AT91C_PIO_PD6) //  DBGU Debug Transmit Data
+#define AT91C_PIO_PD7             (1 <<  7) // Pin Controlled by PD7
+#define AT91C_PD7_PCK0            (AT91C_PIO_PD7) //  PMC Programmable Clock Output 0
+#define AT91C_PD7_TSYNC           (AT91C_PIO_PD7) //  ETM Synchronization signal
+#define AT91C_PIO_PD8             (1 <<  8) // Pin Controlled by PD8
+#define AT91C_PD8_PCK1            (AT91C_PIO_PD8) //  PMC Programmable Clock Output 1
+#define AT91C_PD8_TCLK            (AT91C_PIO_PD8) //  ETM Trace Clock signal
+#define AT91C_PIO_PD9             (1 <<  9) // Pin Controlled by PD9
+#define AT91C_PD9_PCK2            (AT91C_PIO_PD9) //  PMC Programmable Clock 2
+#define AT91C_PD9_TPS0            (AT91C_PIO_PD9) //  ETM ARM9 pipeline status 0
+
+// *****************************************************************************
+//               PERIPHERAL ID DEFINITIONS FOR AT91RM9200
+// *****************************************************************************
+#define AT91C_ID_FIQ              ( 0) // Advanced Interrupt Controller (FIQ)
+#define AT91C_ID_SYS              ( 1) // System Peripheral
+#define AT91C_ID_PIOA             ( 2) // Parallel IO Controller A 
+#define AT91C_ID_PIOB             ( 3) // Parallel IO Controller B
+#define AT91C_ID_PIOC             ( 4) // Parallel IO Controller C
+#define AT91C_ID_PIOD             ( 5) // Parallel IO Controller D
+#define AT91C_ID_US0              ( 6) // USART 0
+#define AT91C_ID_US1              ( 7) // USART 1
+#define AT91C_ID_US2              ( 8) // USART 2
+#define AT91C_ID_US3              ( 9) // USART 3
+#define AT91C_ID_MCI              (10) // Multimedia Card Interface
+#define AT91C_ID_UDP              (11) // USB Device Port
+#define AT91C_ID_TWI              (12) // Two-Wire Interface
+#define AT91C_ID_SPI              (13) // Serial Peripheral Interface
+#define AT91C_ID_SSC0             (14) // Serial Synchronous Controller 0
+#define AT91C_ID_SSC1             (15) // Serial Synchronous Controller 1
+#define AT91C_ID_SSC2             (16) // Serial Synchronous Controller 2
+#define AT91C_ID_TC0              (17) // Timer Counter 0
+#define AT91C_ID_TC1              (18) // Timer Counter 1
+#define AT91C_ID_TC2              (19) // Timer Counter 2
+#define AT91C_ID_TC3              (20) // Timer Counter 3
+#define AT91C_ID_TC4              (21) // Timer Counter 4
+#define AT91C_ID_TC5              (22) // Timer Counter 5
+#define AT91C_ID_UHP              (23) // USB Host port
+#define AT91C_ID_EMAC             (24) // Ethernet MAC
+#define AT91C_ID_IRQ0             (25) // Advanced Interrupt Controller (IRQ0)
+#define AT91C_ID_IRQ1             (26) // Advanced Interrupt Controller (IRQ1)
+#define AT91C_ID_IRQ2             (27) // Advanced Interrupt Controller (IRQ2)
+#define AT91C_ID_IRQ3             (28) // Advanced Interrupt Controller (IRQ3)
+#define AT91C_ID_IRQ4             (29) // Advanced Interrupt Controller (IRQ4)
+#define AT91C_ID_IRQ5             (30) // Advanced Interrupt Controller (IRQ5)
+#define AT91C_ID_IRQ6             (31) // Advanced Interrupt Controller (IRQ6)
+
+// *****************************************************************************
+//               BASE ADDRESS DEFINITIONS FOR AT91RM9200
+// *****************************************************************************
+#define AT91C_BASE_SYS            (0xFFFFF000) // (SYS) Base Address
+#define AT91C_BASE_MC             (0xFFFFFF00) // (MC) Base Address
+#define AT91C_BASE_RTC            (0xFFFFFE00) // (RTC) Base Address
+#define AT91C_BASE_ST             (0xFFFFFD00) // (ST) Base Address
+#define AT91C_BASE_PMC            (0xFFFFFC00) // (PMC) Base Address
+#define AT91C_BASE_CKGR           (0xFFFFFC20) // (CKGR) Base Address
+#define AT91C_BASE_PIOD           (0xFFFFFA00) // (PIOD) Base Address
+#define AT91C_BASE_PIOC           (0xFFFFF800) // (PIOC) Base Address
+#define AT91C_BASE_PIOB           (0xFFFFF600) // (PIOB) Base Address
+#define AT91C_BASE_PIOA           (0xFFFFF400) // (PIOA) Base Address
+#define AT91C_BASE_DBGU           (0xFFFFF200) // (DBGU) Base Address
+#define AT91C_BASE_PDC_DBGU       (0xFFFFF300) // (PDC_DBGU) Base Address
+#define AT91C_BASE_AIC            (0xFFFFF000) // (AIC) Base Address
+#define AT91C_BASE_PDC_SPI        (0xFFFE0100) // (PDC_SPI) Base Address
+#define AT91C_BASE_SPI            (0xFFFE0000) // (SPI) Base Address
+#define AT91C_BASE_PDC_SSC2       (0xFFFD8100) // (PDC_SSC2) Base Address
+#define AT91C_BASE_SSC2           (0xFFFD8000) // (SSC2) Base Address
+#define AT91C_BASE_PDC_SSC1       (0xFFFD4100) // (PDC_SSC1) Base Address
+#define AT91C_BASE_SSC1           (0xFFFD4000) // (SSC1) Base Address
+#define AT91C_BASE_PDC_SSC0       (0xFFFD0100) // (PDC_SSC0) Base Address
+#define AT91C_BASE_SSC0           (0xFFFD0000) // (SSC0) Base Address
+#define AT91C_BASE_PDC_US3        (0xFFFCC100) // (PDC_US3) Base Address
+#define AT91C_BASE_US3            (0xFFFCC000) // (US3) Base Address
+#define AT91C_BASE_PDC_US2        (0xFFFC8100) // (PDC_US2) Base Address
+#define AT91C_BASE_US2            (0xFFFC8000) // (US2) Base Address
+#define AT91C_BASE_PDC_US1        (0xFFFC4100) // (PDC_US1) Base Address
+#define AT91C_BASE_US1            (0xFFFC4000) // (US1) Base Address
+#define AT91C_BASE_PDC_US0        (0xFFFC0100) // (PDC_US0) Base Address
+#define AT91C_BASE_US0            (0xFFFC0000) // (US0) Base Address
+#define AT91C_BASE_TWI            (0xFFFB8000) // (TWI) Base Address
+#define AT91C_BASE_PDC_MCI        (0xFFFB4100) // (PDC_MCI) Base Address
+#define AT91C_BASE_MCI            (0xFFFB4000) // (MCI) Base Address
+#define AT91C_BASE_UDP            (0xFFFB0000) // (UDP) Base Address
+#define AT91C_BASE_TC5            (0xFFFA4080) // (TC5) Base Address
+#define AT91C_BASE_TC4            (0xFFFA4040) // (TC4) Base Address
+#define AT91C_BASE_TC3            (0xFFFA4000) // (TC3) Base Address
+#define AT91C_BASE_TCB1           (0xFFFA4080) // (TCB1) Base Address
+#define AT91C_BASE_TC2            (0xFFFA0080) // (TC2) Base Address
+#define AT91C_BASE_TC1            (0xFFFA0040) // (TC1) Base Address
+#define AT91C_BASE_TC0            (0xFFFA0000) // (TC0) Base Address
+#define AT91C_BASE_TCB0           (0xFFFA0000) // (TCB0) Base Address
+#define AT91C_BASE_UHP            (0x00300000) // (UHP) Base Address
+#define AT91C_BASE_EMAC           (0xFFFBC000) // (EMAC) Base Address
+#define AT91C_BASE_EBI            (0xFFFFFF60) // (EBI) Base Address
+#define AT91C_BASE_SMC2           (0xFFFFFF70) // (SMC2) Base Address
+#define AT91C_BASE_SDRC           (0xFFFFFF90) // (SDRC) Base Address
+#define AT91C_BASE_BFC            (0xFFFFFFC0) // (BFC) Base Address
+
+// *****************************************************************************
+//               MEMORY MAPPING DEFINITIONS FOR AT91RM9200
+// *****************************************************************************
+#define AT91C_ISRAM	              (0x00200000) // Internal SRAM base address
+#define AT91C_ISRAM_SIZE	         (0x00004000) // Internal SRAM size in byte (16 Kbyte)
+#define AT91C_IROM 	              (0x00100000) // Internal ROM base address
+#define AT91C_IROM_SIZE	          (0x00020000) // Internal ROM size in byte (128 Kbyte)
+
+
diff --git a/target/linux/at91/image/dfboot/src/include/led.h b/target/linux/at91/image/dfboot/src/include/led.h
new file mode 100644
index 0000000..9bebd9c
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/include/led.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2006
+ * Atmel Nordic AB <www.atmel.com>
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+ 
+ #ifndef __LED_H
+#define __LED_H
+
+#ifndef	__ASSEMBLY__
+extern void	LED_init (void);
+extern void	LED_set(unsigned int led);
+extern void	red_LED_on(void);
+extern void	red_LED_off(void);
+extern void	green_LED_on(void);
+extern void	green_LED_off(void);
+extern void	yellow_LED_on(void);
+extern void	yellow_LED_off(void);
+extern void	LED_blink(unsigned int led);
+#else
+	.extern LED_init
+	.extern LED_set
+	.extern LED_blink
+	.extern red_LED_on
+	.extern red_LED_off
+	.extern yellow_LED_on
+	.extern yellow_LED_off
+	.extern green_LED_on
+	.extern green_LED_off
+#endif
+#endif
diff --git a/target/linux/at91/image/dfboot/src/include/lib_AT91RM9200.h b/target/linux/at91/image/dfboot/src/include/lib_AT91RM9200.h
new file mode 100644
index 0000000..c322b32
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/include/lib_AT91RM9200.h
@@ -0,0 +1,2978 @@
+//*----------------------------------------------------------------------------
+//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
+//*----------------------------------------------------------------------------
+//* The software is delivered "AS IS" without warranty or condition of any
+//* kind, either express, implied or statutory. This includes without
+//* limitation any warranty or condition with respect to merchantability or
+//* fitness for any particular purpose, or against the infringements of
+//* intellectual property rights of others.
+//*----------------------------------------------------------------------------
+//* File Name           : lib_AT91RM9200.h
+//* Object              : AT91RM9200 inlined functions
+//* Generated           : AT91 SW Application Group  11/19/2003 (17:20:51)
+//*
+//* CVS Reference       : /lib_pdc.h/1.2/Tue Jul 02 12:29:40 2002//
+//* CVS Reference       : /lib_dbgu.h/1.1/Fri Jan 31 12:18:40 2003//
+//* CVS Reference       : /lib_rtc_1245d.h/1.1/Fri Jan 31 12:19:12 2003//
+//* CVS Reference       : /lib_ssc.h/1.4/Fri Jan 31 12:19:20 2003//
+//* CVS Reference       : /lib_spi_AT91RMxxxx.h/1.2/Fri Jan 31 12:19:31 2003//
+//* CVS Reference       : /lib_tc_1753b.h/1.1/Fri Jan 31 12:20:02 2003//
+//* CVS Reference       : /lib_pmc.h/1.3/Thu Nov 14 07:40:45 2002//
+//* CVS Reference       : /lib_pio.h/1.3/Fri Jan 31 12:18:56 2003//
+//* CVS Reference       : /lib_twi.h/1.2/Fri Jan 31 12:19:38 2003//
+//* CVS Reference       : /lib_usart.h/1.5/Thu Nov 21 16:01:53 2002//
+//* CVS Reference       : /lib_mci.h/1.2/Wed Nov 20 14:18:55 2002//
+//* CVS Reference       : /lib_aic.h/1.3/Fri Jul 12 07:46:11 2002//
+//* CVS Reference       : /lib_udp.h/1.3/Fri Jan 31 12:19:48 2003//
+//* CVS Reference       : /lib_st.h/1.4/Fri Jan 31 12:20:13 2003//
+//*----------------------------------------------------------------------------
+
+#ifndef lib_AT91RM9200_H
+#define lib_AT91RM9200_H
+
+/* *****************************************************************************
+                SOFTWARE API FOR PDC
+   ***************************************************************************** */
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_SetNextRx
+//* \brief Set the next receive transfer descriptor
+//*----------------------------------------------------------------------------
+static inline void AT91F_PDC_SetNextRx (
+	AT91PS_PDC pPDC,     // \arg pointer to a PDC controller
+	char *address,       // \arg address to the next bloc to be received
+	unsigned int bytes)  // \arg number of bytes to be received
+{
+	pPDC->PDC_RNPR = (unsigned int) address;
+	pPDC->PDC_RNCR = bytes;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_SetNextTx
+//* \brief Set the next transmit transfer descriptor
+//*----------------------------------------------------------------------------
+static inline void AT91F_PDC_SetNextTx (
+	AT91PS_PDC pPDC,       // \arg pointer to a PDC controller
+	char *address,         // \arg address to the next bloc to be transmitted
+	unsigned int bytes)    // \arg number of bytes to be transmitted
+{
+	pPDC->PDC_TNPR = (unsigned int) address;
+	pPDC->PDC_TNCR = bytes;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_SetRx
+//* \brief Set the receive transfer descriptor
+//*----------------------------------------------------------------------------
+static inline void AT91F_PDC_SetRx (
+	AT91PS_PDC pPDC,       // \arg pointer to a PDC controller
+	char *address,         // \arg address to the next bloc to be received
+	unsigned int bytes)    // \arg number of bytes to be received
+{
+	pPDC->PDC_RPR = (unsigned int) address;
+	pPDC->PDC_RCR = bytes;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_SetTx
+//* \brief Set the transmit transfer descriptor
+//*----------------------------------------------------------------------------
+static inline void AT91F_PDC_SetTx (
+	AT91PS_PDC pPDC,       // \arg pointer to a PDC controller
+	char *address,         // \arg address to the next bloc to be transmitted
+	unsigned int bytes)    // \arg number of bytes to be transmitted
+{
+	pPDC->PDC_TPR = (unsigned int) address;
+	pPDC->PDC_TCR = bytes;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_EnableTx
+//* \brief Enable transmit
+//*----------------------------------------------------------------------------
+static inline void AT91F_PDC_EnableTx (
+	AT91PS_PDC pPDC )       // \arg pointer to a PDC controller
+{
+	pPDC->PDC_PTCR = AT91C_PDC_TXTEN;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_EnableRx
+//* \brief Enable receive
+//*----------------------------------------------------------------------------
+static inline void AT91F_PDC_EnableRx (
+	AT91PS_PDC pPDC )       // \arg pointer to a PDC controller
+{
+	pPDC->PDC_PTCR = AT91C_PDC_RXTEN;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_DisableTx
+//* \brief Disable transmit
+//*----------------------------------------------------------------------------
+static inline void AT91F_PDC_DisableTx (
+	AT91PS_PDC pPDC )       // \arg pointer to a PDC controller
+{
+	pPDC->PDC_PTCR = AT91C_PDC_TXTDIS;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_DisableRx
+//* \brief Disable receive
+//*----------------------------------------------------------------------------
+static inline void AT91F_PDC_DisableRx (
+	AT91PS_PDC pPDC )       // \arg pointer to a PDC controller
+{
+	pPDC->PDC_PTCR = AT91C_PDC_RXTDIS;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_IsTxEmpty
+//* \brief Test if the current transfer descriptor has been sent
+//*----------------------------------------------------------------------------
+static inline int AT91F_PDC_IsTxEmpty ( // \return return 1 if transfer is complete
+	AT91PS_PDC pPDC )       // \arg pointer to a PDC controller
+{
+	return !(pPDC->PDC_TCR);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_IsNextTxEmpty
+//* \brief Test if the next transfer descriptor has been moved to the current td
+//*----------------------------------------------------------------------------
+static inline int AT91F_PDC_IsNextTxEmpty ( // \return return 1 if transfer is complete
+	AT91PS_PDC pPDC )       // \arg pointer to a PDC controller
+{
+	return !(pPDC->PDC_TNCR);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_IsRxEmpty
+//* \brief Test if the current transfer descriptor has been filled
+//*----------------------------------------------------------------------------
+static inline int AT91F_PDC_IsRxEmpty ( // \return return 1 if transfer is complete
+	AT91PS_PDC pPDC )       // \arg pointer to a PDC controller
+{
+	return !(pPDC->PDC_RCR);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_IsNextRxEmpty
+//* \brief Test if the next transfer descriptor has been moved to the current td
+//*----------------------------------------------------------------------------
+static inline int AT91F_PDC_IsNextRxEmpty ( // \return return 1 if transfer is complete
+	AT91PS_PDC pPDC )       // \arg pointer to a PDC controller
+{
+	return !(pPDC->PDC_RNCR);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_Open
+//* \brief Open PDC: disable TX and RX reset transfer descriptors, re-enable RX and TX
+//*----------------------------------------------------------------------------
+static inline void AT91F_PDC_Open (
+	AT91PS_PDC pPDC)       // \arg pointer to a PDC controller
+{
+    //* Disable the RX and TX PDC transfer requests
+	AT91F_PDC_DisableRx(pPDC);
+	AT91F_PDC_DisableTx(pPDC);
+
+	//* Reset all Counter register Next buffer first
+	AT91F_PDC_SetNextTx(pPDC, (char *) 0, 0);
+	AT91F_PDC_SetNextRx(pPDC, (char *) 0, 0);
+	AT91F_PDC_SetTx(pPDC, (char *) 0, 0);
+	AT91F_PDC_SetRx(pPDC, (char *) 0, 0);
+
+    //* Enable the RX and TX PDC transfer requests
+	AT91F_PDC_EnableRx(pPDC);
+	AT91F_PDC_EnableTx(pPDC);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_Close
+//* \brief Close PDC: disable TX and RX reset transfer descriptors
+//*----------------------------------------------------------------------------
+static inline void AT91F_PDC_Close (
+	AT91PS_PDC pPDC)       // \arg pointer to a PDC controller
+{
+    //* Disable the RX and TX PDC transfer requests
+	AT91F_PDC_DisableRx(pPDC);
+	AT91F_PDC_DisableTx(pPDC);
+
+	//* Reset all Counter register Next buffer first
+	AT91F_PDC_SetNextTx(pPDC, (char *) 0, 0);
+	AT91F_PDC_SetNextRx(pPDC, (char *) 0, 0);
+	AT91F_PDC_SetTx(pPDC, (char *) 0, 0);
+	AT91F_PDC_SetRx(pPDC, (char *) 0, 0);
+
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_SendFrame
+//* \brief Close PDC: disable TX and RX reset transfer descriptors
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PDC_SendFrame(
+	AT91PS_PDC pPDC,
+	char *pBuffer,
+	unsigned int szBuffer,
+	char *pNextBuffer,
+	unsigned int szNextBuffer )
+{
+	if (AT91F_PDC_IsTxEmpty(pPDC)) {
+		//* Buffer and next buffer can be initialized
+		AT91F_PDC_SetTx(pPDC, pBuffer, szBuffer);
+		AT91F_PDC_SetNextTx(pPDC, pNextBuffer, szNextBuffer);
+		return 2;
+	}
+	else if (AT91F_PDC_IsNextTxEmpty(pPDC)) {
+		//* Only one buffer can be initialized
+		AT91F_PDC_SetNextTx(pPDC, pBuffer, szBuffer);
+		return 1;
+	}
+	else {
+		//* All buffer are in use...
+		return 0;
+	}
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PDC_ReceiveFrame
+//* \brief Close PDC: disable TX and RX reset transfer descriptors
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PDC_ReceiveFrame (
+	AT91PS_PDC pPDC,
+	char *pBuffer,
+	unsigned int szBuffer,
+	char *pNextBuffer,
+	unsigned int szNextBuffer )
+{
+	if (AT91F_PDC_IsRxEmpty(pPDC)) {
+		//* Buffer and next buffer can be initialized
+		AT91F_PDC_SetRx(pPDC, pBuffer, szBuffer);
+		AT91F_PDC_SetNextRx(pPDC, pNextBuffer, szNextBuffer);
+		return 2;
+	}
+	else if (AT91F_PDC_IsNextRxEmpty(pPDC)) {
+		//* Only one buffer can be initialized
+		AT91F_PDC_SetNextRx(pPDC, pBuffer, szBuffer);
+		return 1;
+	}
+	else {
+		//* All buffer are in use...
+		return 0;
+	}
+}
+/* *****************************************************************************
+                SOFTWARE API FOR DBGU
+   ***************************************************************************** */
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_DBGU_InterruptEnable
+//* \brief Enable DBGU Interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_DBGU_InterruptEnable(
+        AT91PS_DBGU pDbgu,   // \arg  pointer to a DBGU controller
+        unsigned int flag) // \arg  dbgu interrupt to be enabled
+{
+        pDbgu->DBGU_IER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_DBGU_InterruptDisable
+//* \brief Disable DBGU Interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_DBGU_InterruptDisable(
+        AT91PS_DBGU pDbgu,   // \arg  pointer to a DBGU controller
+        unsigned int flag) // \arg  dbgu interrupt to be disabled
+{
+        pDbgu->DBGU_IDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_DBGU_GetInterruptMaskStatus
+//* \brief Return DBGU Interrupt Mask Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_DBGU_GetInterruptMaskStatus( // \return DBGU Interrupt Mask Status
+        AT91PS_DBGU pDbgu) // \arg  pointer to a DBGU controller
+{
+        return pDbgu->DBGU_IMR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_DBGU_IsInterruptMasked
+//* \brief Test if DBGU Interrupt is Masked 
+//*----------------------------------------------------------------------------
+static inline int AT91F_DBGU_IsInterruptMasked(
+        AT91PS_DBGU pDbgu,   // \arg  pointer to a DBGU controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_DBGU_GetInterruptMaskStatus(pDbgu) & flag);
+}
+
+/* *****************************************************************************
+                SOFTWARE API FOR RTC
+   ***************************************************************************** */
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_RTC_InterruptEnable
+//* \brief Enable RTC Interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_RTC_InterruptEnable(
+        AT91PS_RTC pRtc,   // \arg  pointer to a RTC controller
+        unsigned int flag) // \arg  RTC interrupt to be enabled
+{
+        pRtc->RTC_IER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_RTC_InterruptDisable
+//* \brief Disable RTC Interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_RTC_InterruptDisable(
+        AT91PS_RTC pRtc,   // \arg  pointer to a RTC controller
+        unsigned int flag) // \arg  RTC interrupt to be disabled
+{
+        pRtc->RTC_IDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_RTC_GetInterruptMaskStatus
+//* \brief Return RTC Interrupt Mask Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_RTC_GetInterruptMaskStatus( // \return RTC Interrupt Mask Status
+        AT91PS_RTC pRtc) // \arg  pointer to a RTC controller
+{
+        return pRtc->RTC_IMR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_RTC_IsInterruptMasked
+//* \brief Test if RTC Interrupt is Masked 
+//*----------------------------------------------------------------------------
+static inline int AT91F_RTC_IsInterruptMasked(
+        AT91PS_RTC pRtc,   // \arg  pointer to a RTC controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_RTC_GetInterruptMaskStatus(pRtc) & flag);
+}
+
+/* *****************************************************************************
+                SOFTWARE API FOR SSC
+   ***************************************************************************** */
+//* Define the standard I2S mode configuration
+
+//* Configuration to set in the SSC Transmit Clock Mode Register
+//* Parameters :  nb_bit_by_slot : 8, 16 or 32 bits
+//* 			  nb_slot_by_frame : number of channels
+#define AT91C_I2S_ASY_MASTER_TX_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\
+									   AT91C_SSC_CKS_DIV   +\
+                            		   AT91C_SSC_CKO_CONTINOUS      +\
+                            		   AT91C_SSC_CKG_NONE    +\
+                                       AT91C_SSC_START_FALL_RF +\
+                           			   AT91C_SSC_STTOUT  +\
+                            		   ((1<<16) & AT91C_SSC_STTDLY) +\
+                            		   ((((nb_bit_by_slot*nb_slot_by_frame)/2)-1) <<24))
+
+
+//* Configuration to set in the SSC Transmit Frame Mode Register
+//* Parameters : nb_bit_by_slot : 8, 16 or 32 bits
+//* 			 nb_slot_by_frame : number of channels
+#define AT91C_I2S_ASY_TX_FRAME_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\
+									(nb_bit_by_slot-1)  +\
+                            		AT91C_SSC_MSBF   +\
+                            		(((nb_slot_by_frame-1)<<8) & AT91C_SSC_DATNB)  +\
+                            		(((nb_bit_by_slot-1)<<16) & AT91C_SSC_FSLEN) +\
+                            		AT91C_SSC_FSOS_NEGATIVE)
+
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_SetBaudrate
+//* \brief Set the baudrate according to the CPU clock
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC_SetBaudrate (
+        AT91PS_SSC pSSC,        // \arg pointer to a SSC controller
+        unsigned int mainClock, // \arg peripheral clock
+        unsigned int speed)     // \arg SSC baudrate
+{
+        unsigned int baud_value;
+        //* Define the baud rate divisor register
+        if (speed == 0)
+           baud_value = 0;
+        else
+        {
+           baud_value = (unsigned int) (mainClock * 10)/(2*speed);
+           if ((baud_value % 10) >= 5)
+                  baud_value = (baud_value / 10) + 1;
+           else
+                  baud_value /= 10;
+        }
+
+        pSSC->SSC_CMR = baud_value;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_Configure
+//* \brief Configure SSC
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC_Configure (
+             AT91PS_SSC pSSC,          // \arg pointer to a SSC controller
+             unsigned int syst_clock,  // \arg System Clock Frequency
+             unsigned int baud_rate,   // \arg Expected Baud Rate Frequency
+             unsigned int clock_rx,    // \arg Receiver Clock Parameters
+             unsigned int mode_rx,     // \arg mode Register to be programmed
+             unsigned int clock_tx,    // \arg Transmitter Clock Parameters
+             unsigned int mode_tx)     // \arg mode Register to be programmed
+{
+    //* Disable interrupts
+	pSSC->SSC_IDR = (unsigned int) -1;
+
+    //* Reset receiver and transmitter
+	pSSC->SSC_CR = AT91C_SSC_SWRST | AT91C_SSC_RXDIS | AT91C_SSC_TXDIS ;
+
+    //* Define the Clock Mode Register
+	AT91F_SSC_SetBaudrate(pSSC, syst_clock, baud_rate);
+
+     //* Write the Receive Clock Mode Register
+	pSSC->SSC_RCMR =  clock_rx;
+
+     //* Write the Transmit Clock Mode Register
+	pSSC->SSC_TCMR =  clock_tx;
+
+     //* Write the Receive Frame Mode Register
+	pSSC->SSC_RFMR =  mode_rx;
+
+     //* Write the Transmit Frame Mode Register
+	pSSC->SSC_TFMR =  mode_tx;
+
+    //* Clear Transmit and Receive Counters
+	AT91F_PDC_Open((AT91PS_PDC) &(pSSC->SSC_RPR));
+
+
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_EnableRx
+//* \brief Enable receiving datas
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC_EnableRx (
+	AT91PS_SSC pSSC)     // \arg pointer to a SSC controller
+{
+    //* Enable receiver
+    pSSC->SSC_CR = AT91C_SSC_RXEN;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_DisableRx
+//* \brief Disable receiving datas
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC_DisableRx (
+	AT91PS_SSC pSSC)     // \arg pointer to a SSC controller
+{
+    //* Disable receiver
+    pSSC->SSC_CR = AT91C_SSC_RXDIS;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_EnableTx
+//* \brief Enable sending datas
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC_EnableTx (
+	AT91PS_SSC pSSC)     // \arg pointer to a SSC controller
+{
+    //* Enable  transmitter
+    pSSC->SSC_CR = AT91C_SSC_TXEN;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_DisableTx
+//* \brief Disable sending datas
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC_DisableTx (
+	AT91PS_SSC pSSC)     // \arg pointer to a SSC controller
+{
+    //* Disable  transmitter
+    pSSC->SSC_CR = AT91C_SSC_TXDIS;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_EnableIt
+//* \brief Enable SSC IT
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC_EnableIt (
+	AT91PS_SSC pSSC, // \arg pointer to a SSC controller
+	unsigned int flag)   // \arg IT to be enabled
+{
+	//* Write to the IER register
+	pSSC->SSC_IER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_DisableIt
+//* \brief Disable SSC IT
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC_DisableIt (
+	AT91PS_SSC pSSC, // \arg pointer to a SSC controller
+	unsigned int flag)   // \arg IT to be disabled
+{
+	//* Write to the IDR register
+	pSSC->SSC_IDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_ReceiveFrame
+//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initialized with Next Buffer, 0 if PDC is busy
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_SSC_ReceiveFrame (
+	AT91PS_SSC pSSC,
+	char *pBuffer,
+	unsigned int szBuffer,
+	char *pNextBuffer,
+	unsigned int szNextBuffer )
+{
+	return AT91F_PDC_ReceiveFrame(
+		(AT91PS_PDC) &(pSSC->SSC_RPR),
+		pBuffer,
+		szBuffer,
+		pNextBuffer,
+		szNextBuffer);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_SendFrame
+//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initialized with Next Buffer, 0 if PDC is busy
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_SSC_SendFrame(
+	AT91PS_SSC pSSC,
+	char *pBuffer,
+	unsigned int szBuffer,
+	char *pNextBuffer,
+	unsigned int szNextBuffer )
+{
+	return AT91F_PDC_SendFrame(
+		(AT91PS_PDC) &(pSSC->SSC_RPR),
+		pBuffer,
+		szBuffer,
+		pNextBuffer,
+		szNextBuffer);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_GetInterruptMaskStatus
+//* \brief Return SSC Interrupt Mask Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_SSC_GetInterruptMaskStatus( // \return SSC Interrupt Mask Status
+        AT91PS_SSC pSsc) // \arg  pointer to a SSC controller
+{
+        return pSsc->SSC_IMR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC_IsInterruptMasked
+//* \brief Test if SSC Interrupt is Masked 
+//*----------------------------------------------------------------------------
+static inline int AT91F_SSC_IsInterruptMasked(
+        AT91PS_SSC pSsc,   // \arg  pointer to a SSC controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_SSC_GetInterruptMaskStatus(pSsc) & flag);
+}
+
+/* *****************************************************************************
+                SOFTWARE API FOR SPI
+   ***************************************************************************** */
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_Open
+//* \brief Open a SPI Port
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_SPI_Open (
+        const unsigned int null)  // \arg
+{
+        /* NOT DEFINED AT THIS MOMENT */
+        return ( 0 );
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_CfgCs
+//* \brief Configure SPI chip select register
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_CfgCs (
+	int cs,     // SPI cs number (0 to 3)
+ 	int val)   //  chip select register
+{
+	//* Write to the CSR register
+	*(AT91C_SPI_CSR + cs) = val;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_EnableIt
+//* \brief Enable SPI interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_EnableIt (
+	AT91PS_SPI pSPI,     // pointer to a SPI controller
+	unsigned int flag)   // IT to be enabled
+{
+	//* Write to the IER register
+	pSPI->SPI_IER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_DisableIt
+//* \brief Disable SPI interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_DisableIt (
+	AT91PS_SPI pSPI, // pointer to a SPI controller
+	unsigned int flag) // IT to be disabled
+{
+	//* Write to the IDR register
+	pSPI->SPI_IDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_Reset
+//* \brief Reset the SPI controller
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_Reset (
+	AT91PS_SPI pSPI // pointer to a SPI controller
+	)
+{
+	//* Write to the CR register
+	pSPI->SPI_CR = AT91C_SPI_SWRST;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_Enable
+//* \brief Enable the SPI controller
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_Enable (
+	AT91PS_SPI pSPI // pointer to a SPI controller
+	)
+{
+	//* Write to the CR register
+	pSPI->SPI_CR = AT91C_SPI_SPIEN;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_Disable
+//* \brief Disable the SPI controller
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_Disable (
+	AT91PS_SPI pSPI // pointer to a SPI controller
+	)
+{
+	//* Write to the CR register
+	pSPI->SPI_CR = AT91C_SPI_SPIDIS;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_CfgMode
+//* \brief Enable the SPI controller
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_CfgMode (
+	AT91PS_SPI pSPI, // pointer to a SPI controller
+	int mode)        // mode register 
+{
+	//* Write to the MR register
+	pSPI->SPI_MR = mode;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_CfgPCS
+//* \brief Switch to the correct PCS of SPI Mode Register : Fixed Peripheral Selected
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_CfgPCS (
+	AT91PS_SPI pSPI, // pointer to a SPI controller
+	char PCS_Device) // PCS of the Device
+{	
+ 	//* Write to the MR register
+	pSPI->SPI_MR &= 0xFFF0FFFF;
+	pSPI->SPI_MR |= ( (PCS_Device<<16) & AT91C_SPI_PCS );
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_ReceiveFrame
+//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_SPI_ReceiveFrame (
+	AT91PS_SPI pSPI,
+	char *pBuffer,
+	unsigned int szBuffer,
+	char *pNextBuffer,
+	unsigned int szNextBuffer )
+{
+	return AT91F_PDC_ReceiveFrame(
+		(AT91PS_PDC) &(pSPI->SPI_RPR),
+		pBuffer,
+		szBuffer,
+		pNextBuffer,
+		szNextBuffer);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_SendFrame
+//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is bSPIy
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_SPI_SendFrame(
+	AT91PS_SPI pSPI,
+	char *pBuffer,
+	unsigned int szBuffer,
+	char *pNextBuffer,
+	unsigned int szNextBuffer )
+{
+	return AT91F_PDC_SendFrame(
+		(AT91PS_PDC) &(pSPI->SPI_RPR),
+		pBuffer,
+		szBuffer,
+		pNextBuffer,
+		szNextBuffer);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_Close
+//* \brief Close SPI: disable IT disable transfert, close PDC
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_Close (
+	AT91PS_SPI pSPI)     // \arg pointer to a SPI controller
+{
+    //* Reset all the Chip Select register
+    pSPI->SPI_CSR[0] = 0 ;
+    pSPI->SPI_CSR[1] = 0 ;
+    pSPI->SPI_CSR[2] = 0 ;
+    pSPI->SPI_CSR[3] = 0 ;
+
+    //* Reset the SPI mode
+    pSPI->SPI_MR = 0  ;
+
+    //* Disable all interrupts
+    pSPI->SPI_IDR = 0xFFFFFFFF ;
+
+    //* Abort the Peripheral Data Transfers
+    AT91F_PDC_Close((AT91PS_PDC) &(pSPI->SPI_RPR));
+
+    //* Disable receiver and transmitter and stop any activity immediately
+    pSPI->SPI_CR = AT91C_SPI_SPIDIS;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_PutChar
+//* \brief Send a character,does not check if ready to send
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_PutChar (
+	AT91PS_SPI pSPI,
+	unsigned int character,
+             unsigned int cs_number )
+{
+    unsigned int value_for_cs;
+    value_for_cs = (~(1 << cs_number)) & 0xF;  //Place a zero among a 4 ONEs number
+    pSPI->SPI_TDR = (character & 0xFFFF) | (value_for_cs << 16);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_GetChar
+//* \brief Receive a character,does not check if a character is available
+//*----------------------------------------------------------------------------
+static inline int AT91F_SPI_GetChar (
+	const AT91PS_SPI pSPI)
+{
+    return((pSPI->SPI_RDR) & 0xFFFF);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_GetInterruptMaskStatus
+//* \brief Return SPI Interrupt Mask Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_SPI_GetInterruptMaskStatus( // \return SPI Interrupt Mask Status
+        AT91PS_SPI pSpi) // \arg  pointer to a SPI controller
+{
+        return pSpi->SPI_IMR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_IsInterruptMasked
+//* \brief Test if SPI Interrupt is Masked 
+//*----------------------------------------------------------------------------
+static inline int AT91F_SPI_IsInterruptMasked(
+        AT91PS_SPI pSpi,   // \arg  pointer to a SPI controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_SPI_GetInterruptMaskStatus(pSpi) & flag);
+}
+
+/* *****************************************************************************
+                SOFTWARE API FOR TC
+   ***************************************************************************** */
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TC_InterruptEnable
+//* \brief Enable TC Interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_TC_InterruptEnable(
+        AT91PS_TC pTc,   // \arg  pointer to a TC controller
+        unsigned int flag) // \arg  TC interrupt to be enabled
+{
+        pTc->TC_IER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TC_InterruptDisable
+//* \brief Disable TC Interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_TC_InterruptDisable(
+        AT91PS_TC pTc,   // \arg  pointer to a TC controller
+        unsigned int flag) // \arg  TC interrupt to be disabled
+{
+        pTc->TC_IDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TC_GetInterruptMaskStatus
+//* \brief Return TC Interrupt Mask Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_TC_GetInterruptMaskStatus( // \return TC Interrupt Mask Status
+        AT91PS_TC pTc) // \arg  pointer to a TC controller
+{
+        return pTc->TC_IMR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TC_IsInterruptMasked
+//* \brief Test if TC Interrupt is Masked 
+//*----------------------------------------------------------------------------
+static inline int AT91F_TC_IsInterruptMasked(
+        AT91PS_TC pTc,   // \arg  pointer to a TC controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_TC_GetInterruptMaskStatus(pTc) & flag);
+}
+
+/* *****************************************************************************
+                SOFTWARE API FOR PMC
+   ***************************************************************************** */
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_CKGR_GetMainClock
+//* \brief Return Main clock in Hz
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_CKGR_GetMainClock (
+	AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller
+	unsigned int slowClock)  // \arg slowClock in Hz
+{
+	return ((pCKGR->CKGR_MCFR  & AT91C_CKGR_MAINF) * slowClock) >> 4;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PMC_GetProcessorClock
+//* \brief Return processor clock in Hz (for AT91RM3400 and AT91RM9200)
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PMC_GetProcessorClock (
+	AT91PS_PMC pPMC, // \arg pointer to PMC controller
+	AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller
+	unsigned int slowClock)  // \arg slowClock in Hz
+{
+	unsigned int reg = pPMC->PMC_MCKR;
+	unsigned int prescaler = (1 << ((reg & AT91C_PMC_PRES) >> 2));
+	unsigned int pllDivider, pllMultiplier;
+
+	switch (reg & AT91C_PMC_CSS) {
+		case AT91C_PMC_CSS_SLOW_CLK: // Slow clock selected
+			return slowClock / prescaler;
+		case AT91C_PMC_CSS_MAIN_CLK: // Main clock is selected
+			return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / prescaler;
+		case AT91C_PMC_CSS_PLLA_CLK: // PLLA clock is selected
+			reg = pCKGR->CKGR_PLLAR;
+			pllDivider    = (reg  & AT91C_CKGR_DIVA);
+			pllMultiplier = ((reg  & AT91C_CKGR_MULA) >> 16) + 1;
+			if (reg & AT91C_CKGR_SRCA) // Source is Main clock
+				return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / pllDivider * pllMultiplier / prescaler;
+			else                       // Source is Slow clock
+				return slowClock / pllDivider * pllMultiplier / prescaler;
+		case AT91C_PMC_CSS_PLLB_CLK: // PLLB clock is selected
+			reg = pCKGR->CKGR_PLLBR;
+			pllDivider    = (reg  & AT91C_CKGR_DIVB);
+			pllMultiplier = ((reg  & AT91C_CKGR_MULB) >> 16) + 1;
+			return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / pllDivider * pllMultiplier / prescaler;
+	}
+	return 0;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PMC_GetMasterClock
+//* \brief Return master clock in Hz (just for AT91RM9200)
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PMC_GetMasterClock (
+	AT91PS_PMC pPMC, // \arg pointer to PMC controller
+	AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller
+	unsigned int slowClock)  // \arg slowClock in Hz
+{
+	return AT91F_PMC_GetProcessorClock(pPMC, pCKGR, slowClock) /
+		(((pPMC->PMC_MCKR & AT91C_PMC_MDIV) >> 8)+1);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PMC_EnablePeriphClock
+//* \brief Enable peripheral clock
+//*----------------------------------------------------------------------------
+static inline void AT91F_PMC_EnablePeriphClock (
+	AT91PS_PMC pPMC, // \arg pointer to PMC controller
+	unsigned int periphIds)  // \arg IDs of peripherals to enable
+{
+	pPMC->PMC_PCER = periphIds;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PMC_DisablePeriphClock
+//* \brief Enable peripheral clock
+//*----------------------------------------------------------------------------
+static inline void AT91F_PMC_DisablePeriphClock (
+	AT91PS_PMC pPMC, // \arg pointer to PMC controller
+	unsigned int periphIds)  // \arg IDs of peripherals to enable
+{
+	pPMC->PMC_PCDR = periphIds;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PMC_EnablePCK
+//* \brief Enable peripheral clock
+//*----------------------------------------------------------------------------
+static inline void AT91F_PMC_EnablePCK (
+	AT91PS_PMC pPMC, // \arg pointer to PMC controller
+	unsigned int pck,  // \arg Peripheral clock identifier 0 .. 7
+	unsigned int ccs,  // \arg clock selection: AT91C_PMC_CSS_SLOW_CLK, AT91C_PMC_CSS_MAIN_CLK, AT91C_PMC_CSS_PLLA_CLK, AT91C_PMC_CSS_PLLB_CLK
+	unsigned int pres) // \arg Programmable clock prescalar AT91C_PMC_PRES_CLK, AT91C_PMC_PRES_CLK_2, ..., AT91C_PMC_PRES_CLK_64
+{
+	pPMC->PMC_PCKR[pck] = ccs | pres;
+	pPMC->PMC_SCER = (1 << pck) << 8;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PMC_DisablePCK
+//* \brief Enable peripheral clock
+//*----------------------------------------------------------------------------
+static inline void AT91F_PMC_DisablePCK (
+	AT91PS_PMC pPMC, // \arg pointer to PMC controller
+	unsigned int pck)  // \arg Peripheral clock identifier 0 .. 7
+{
+	pPMC->PMC_SCDR = (1 << pck) << 8;
+}
+
+/* *****************************************************************************
+                SOFTWARE API FOR PIO
+   ***************************************************************************** */
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_CfgPeriph
+//* \brief Enable pins to be drived by peripheral
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_CfgPeriph(
+	AT91PS_PIO pPio,             // \arg pointer to a PIO controller
+	unsigned int periphAEnable,  // \arg PERIPH A to enable
+	unsigned int periphBEnable)  // \arg PERIPH B to enable
+
+{
+	pPio->PIO_ASR = periphAEnable;
+	pPio->PIO_BSR = periphBEnable;
+	pPio->PIO_PDR = (periphAEnable | periphBEnable); // Set in Periph mode
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_CfgOutput
+//* \brief Enable PIO in output mode
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_CfgOutput(
+	AT91PS_PIO pPio,             // \arg pointer to a PIO controller
+	unsigned int pioEnable)      // \arg PIO to be enabled
+{
+	pPio->PIO_PER = pioEnable; // Set in PIO mode
+	pPio->PIO_OER = pioEnable; // Configure in Output
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_CfgInput
+//* \brief Enable PIO in input mode
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_CfgInput(
+	AT91PS_PIO pPio,             // \arg pointer to a PIO controller
+	unsigned int inputEnable)      // \arg PIO to be enabled
+{
+	// Disable output
+	pPio->PIO_ODR  = inputEnable;
+	pPio->PIO_PER  = inputEnable;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_CfgOpendrain
+//* \brief Configure PIO in open drain
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_CfgOpendrain(
+	AT91PS_PIO pPio,             // \arg pointer to a PIO controller
+	unsigned int multiDrvEnable) // \arg pio to be configured in open drain
+{
+	// Configure the multi-drive option
+	pPio->PIO_MDDR = ~multiDrvEnable;
+	pPio->PIO_MDER = multiDrvEnable;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_CfgPullup
+//* \brief Enable pullup on PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_CfgPullup(
+	AT91PS_PIO pPio,             // \arg pointer to a PIO controller
+	unsigned int pullupEnable)   // \arg enable pullup on PIO
+{
+		// Connect or not Pullup
+	pPio->PIO_PPUDR = ~pullupEnable;
+	pPio->PIO_PPUER = pullupEnable;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_CfgDirectDrive
+//* \brief Enable direct drive on PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_CfgDirectDrive(
+	AT91PS_PIO pPio,             // \arg pointer to a PIO controller
+	unsigned int directDrive)    // \arg PIO to be configured with direct drive
+
+{
+	// Configure the Direct Drive
+	pPio->PIO_OWDR  = ~directDrive;
+	pPio->PIO_OWER  = directDrive;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_CfgInputFilter
+//* \brief Enable input filter on input PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_CfgInputFilter(
+	AT91PS_PIO pPio,             // \arg pointer to a PIO controller
+	unsigned int inputFilter)    // \arg PIO to be configured with input filter
+
+{
+	// Configure the Direct Drive
+	pPio->PIO_IFDR  = ~inputFilter;
+	pPio->PIO_IFER  = inputFilter;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_GetInput
+//* \brief Return PIO input value
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PIO_GetInput( // \return PIO input
+	AT91PS_PIO pPio) // \arg  pointer to a PIO controller
+{
+	return pPio->PIO_PDSR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_IsInputSet
+//* \brief Test if PIO is input flag is active
+//*----------------------------------------------------------------------------
+static inline int AT91F_PIO_IsInputSet(
+	AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+	unsigned int flag) // \arg  flag to be tested
+{
+	return (AT91F_PIO_GetInput(pPio) & flag);
+}
+
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_SetOutput
+//* \brief Set to 1 output PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_SetOutput(
+	AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+	unsigned int flag) // \arg  output to be set
+{
+	pPio->PIO_SODR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_ClearOutput
+//* \brief Set to 0 output PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_ClearOutput(
+	AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+	unsigned int flag) // \arg  output to be cleared
+{
+	pPio->PIO_CODR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_ForceOutput
+//* \brief Force output when Direct drive option is enabled
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_ForceOutput(
+	AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+	unsigned int flag) // \arg  output to be forced
+{
+	pPio->PIO_ODSR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_Enable
+//* \brief Enable PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_Enable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio to be enabled 
+{
+        pPio->PIO_PER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_Disable
+//* \brief Disable PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_Disable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio to be disabled 
+{
+        pPio->PIO_PDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_GetStatus
+//* \brief Return PIO Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PIO_GetStatus( // \return PIO Status
+        AT91PS_PIO pPio) // \arg  pointer to a PIO controller
+{
+        return pPio->PIO_PSR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_IsSet
+//* \brief Test if PIO is Set
+//*----------------------------------------------------------------------------
+static inline int AT91F_PIO_IsSet(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_PIO_GetStatus(pPio) & flag);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_OutputEnable
+//* \brief Output Enable PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_OutputEnable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio output to be enabled
+{
+        pPio->PIO_OER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_OutputDisable
+//* \brief Output Enable PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_OutputDisable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio output to be disabled
+{
+        pPio->PIO_ODR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_GetOutputStatus
+//* \brief Return PIO Output Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PIO_GetOutputStatus( // \return PIO Output Status
+        AT91PS_PIO pPio) // \arg  pointer to a PIO controller
+{
+        return pPio->PIO_OSR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_IsOuputSet
+//* \brief Test if PIO Output is Set
+//*----------------------------------------------------------------------------
+static inline int AT91F_PIO_IsOutputSet(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_PIO_GetOutputStatus(pPio) & flag);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_InputFilterEnable
+//* \brief Input Filter Enable PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_InputFilterEnable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio input filter to be enabled
+{
+        pPio->PIO_IFER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_InputFilterDisable
+//* \brief Input Filter Disable PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_InputFilterDisable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio input filter to be disabled
+{
+        pPio->PIO_IFDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_GetInputFilterStatus
+//* \brief Return PIO Input Filter Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PIO_GetInputFilterStatus( // \return PIO Input Filter Status
+        AT91PS_PIO pPio) // \arg  pointer to a PIO controller
+{
+        return pPio->PIO_IFSR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_IsInputFilterSet
+//* \brief Test if PIO Input filter is Set
+//*----------------------------------------------------------------------------
+static inline int AT91F_PIO_IsInputFilterSet(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_PIO_GetInputFilterStatus(pPio) & flag);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_GetOutputDataStatus
+//* \brief Return PIO Output Data Status 
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PIO_GetOutputDataStatus( // \return PIO Output Data Status 
+	AT91PS_PIO pPio) // \arg  pointer to a PIO controller
+{
+        return pPio->PIO_ODSR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_InterruptEnable
+//* \brief Enable PIO Interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_InterruptEnable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio interrupt to be enabled
+{
+        pPio->PIO_IER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_InterruptDisable
+//* \brief Disable PIO Interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_InterruptDisable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio interrupt to be disabled
+{
+        pPio->PIO_IDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_GetInterruptMaskStatus
+//* \brief Return PIO Interrupt Mask Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PIO_GetInterruptMaskStatus( // \return PIO Interrupt Mask Status
+        AT91PS_PIO pPio) // \arg  pointer to a PIO controller
+{
+        return pPio->PIO_IMR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_GetInterruptStatus
+//* \brief Return PIO Interrupt Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PIO_GetInterruptStatus( // \return PIO Interrupt Status
+        AT91PS_PIO pPio) // \arg  pointer to a PIO controller
+{
+        return pPio->PIO_ISR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_IsInterruptMasked
+//* \brief Test if PIO Interrupt is Masked 
+//*----------------------------------------------------------------------------
+static inline int AT91F_PIO_IsInterruptMasked(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_PIO_GetInterruptMaskStatus(pPio) & flag);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_IsInterruptSet
+//* \brief Test if PIO Interrupt is Set
+//*----------------------------------------------------------------------------
+static inline int AT91F_PIO_IsInterruptSet(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_PIO_GetInterruptStatus(pPio) & flag);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_MultiDriverEnable
+//* \brief Multi Driver Enable PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_MultiDriverEnable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio to be enabled
+{
+        pPio->PIO_MDER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_MultiDriverDisable
+//* \brief Multi Driver Disable PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_MultiDriverDisable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio to be disabled
+{
+        pPio->PIO_MDDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_GetMultiDriverStatus
+//* \brief Return PIO Multi Driver Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PIO_GetMultiDriverStatus( // \return PIO Multi Driver Status
+        AT91PS_PIO pPio) // \arg  pointer to a PIO controller
+{
+        return pPio->PIO_MDSR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_IsMultiDriverSet
+//* \brief Test if PIO MultiDriver is Set
+//*----------------------------------------------------------------------------
+static inline int AT91F_PIO_IsMultiDriverSet(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_PIO_GetMultiDriverStatus(pPio) & flag);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_A_RegisterSelection
+//* \brief PIO A Register Selection 
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_A_RegisterSelection(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio A register selection
+{
+        pPio->PIO_ASR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_B_RegisterSelection
+//* \brief PIO B Register Selection 
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_B_RegisterSelection(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio B register selection 
+{
+        pPio->PIO_BSR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_Get_AB_RegisterStatus
+//* \brief Return PIO Interrupt Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PIO_Get_AB_RegisterStatus( // \return PIO AB Register Status
+        AT91PS_PIO pPio) // \arg  pointer to a PIO controller
+{
+        return pPio->PIO_ABSR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_IsAB_RegisterSet
+//* \brief Test if PIO AB Register is Set
+//*----------------------------------------------------------------------------
+static inline int AT91F_PIO_IsAB_RegisterSet(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_PIO_Get_AB_RegisterStatus(pPio) & flag);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_OutputWriteEnable
+//* \brief Output Write Enable PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_OutputWriteEnable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio output write to be enabled
+{
+        pPio->PIO_OWER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_OutputWriteDisable
+//* \brief Output Write Disable PIO
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIO_OutputWriteDisable(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  pio output write to be disabled
+{
+        pPio->PIO_OWDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_GetOutputWriteStatus
+//* \brief Return PIO Output Write Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PIO_GetOutputWriteStatus( // \return PIO Output Write Status
+        AT91PS_PIO pPio) // \arg  pointer to a PIO controller
+{
+        return pPio->PIO_OWSR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_IsOutputWriteSet
+//* \brief Test if PIO OutputWrite is Set
+//*----------------------------------------------------------------------------
+static inline int AT91F_PIO_IsOutputWriteSet(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_PIO_GetOutputWriteStatus(pPio) & flag);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_GetCfgPullup
+//* \brief Return PIO Configuration Pullup
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_PIO_GetCfgPullup( // \return PIO Configuration Pullup 
+        AT91PS_PIO pPio) // \arg  pointer to a PIO controller
+{
+        return pPio->PIO_PPUSR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_IsOutputDataStatusSet
+//* \brief Test if PIO Output Data Status is Set 
+//*----------------------------------------------------------------------------
+static inline int AT91F_PIO_IsOutputDataStatusSet(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_PIO_GetOutputDataStatus(pPio) & flag);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIO_IsCfgPullupStatusSet
+//* \brief Test if PIO Configuration Pullup Status is Set
+//*----------------------------------------------------------------------------
+static inline int AT91F_PIO_IsCfgPullupStatusSet(
+        AT91PS_PIO pPio,   // \arg  pointer to a PIO controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (~AT91F_PIO_GetCfgPullup(pPio) & flag);
+}
+
+/* *****************************************************************************
+                SOFTWARE API FOR TWI
+   ***************************************************************************** */
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TWI_EnableIt
+//* \brief Enable TWI IT
+//*----------------------------------------------------------------------------
+static inline void AT91F_TWI_EnableIt (
+	AT91PS_TWI pTWI, // \arg pointer to a TWI controller
+	unsigned int flag)   // \arg IT to be enabled
+{
+	//* Write to the IER register
+	pTWI->TWI_IER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TWI_DisableIt
+//* \brief Disable TWI IT
+//*----------------------------------------------------------------------------
+static inline void AT91F_TWI_DisableIt (
+	AT91PS_TWI pTWI, // \arg pointer to a TWI controller
+	unsigned int flag)   // \arg IT to be disabled
+{
+	//* Write to the IDR register
+	pTWI->TWI_IDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TWI_Configure
+//* \brief Configure TWI in master mode
+//*----------------------------------------------------------------------------
+static inline void AT91F_TWI_Configure ( AT91PS_TWI pTWI )          // \arg pointer to a TWI controller
+{
+    //* Disable interrupts
+	pTWI->TWI_IDR = (unsigned int) -1;
+
+    //* Reset peripheral
+	pTWI->TWI_CR = AT91C_TWI_SWRST;
+
+	//* Set Master mode
+	pTWI->TWI_CR = AT91C_TWI_MSEN | AT91C_TWI_SVDIS;
+
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TWI_GetInterruptMaskStatus
+//* \brief Return TWI Interrupt Mask Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_TWI_GetInterruptMaskStatus( // \return TWI Interrupt Mask Status
+        AT91PS_TWI pTwi) // \arg  pointer to a TWI controller
+{
+        return pTwi->TWI_IMR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TWI_IsInterruptMasked
+//* \brief Test if TWI Interrupt is Masked 
+//*----------------------------------------------------------------------------
+static inline int AT91F_TWI_IsInterruptMasked(
+        AT91PS_TWI pTwi,   // \arg  pointer to a TWI controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_TWI_GetInterruptMaskStatus(pTwi) & flag);
+}
+
+/* *****************************************************************************
+                SOFTWARE API FOR USART
+   ***************************************************************************** */
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_Baudrate
+//* \brief Calculate the baudrate
+//* Standard Asynchronous Mode : 8 bits , 1 stop , no parity
+#define AT91C_US_ASYNC_MODE ( AT91C_US_USMODE_NORMAL + \
+                        AT91C_US_NBSTOP_1_BIT + \
+                        AT91C_US_PAR_NONE + \
+                        AT91C_US_CHRL_8_BITS + \
+                        AT91C_US_CLKS_CLOCK )
+
+//* Standard External Asynchronous Mode : 8 bits , 1 stop , no parity
+#define AT91C_US_ASYNC_SCK_MODE ( AT91C_US_USMODE_NORMAL + \
+                            AT91C_US_NBSTOP_1_BIT + \
+                            AT91C_US_PAR_NONE + \
+                            AT91C_US_CHRL_8_BITS + \
+                            AT91C_US_CLKS_EXT )
+
+//* Standard Synchronous Mode : 8 bits , 1 stop , no parity
+#define AT91C_US_SYNC_MODE ( AT91C_US_SYNC + \
+                       AT91C_US_USMODE_NORMAL + \
+                       AT91C_US_NBSTOP_1_BIT + \
+                       AT91C_US_PAR_NONE + \
+                       AT91C_US_CHRL_8_BITS + \
+                       AT91C_US_CLKS_CLOCK )
+
+//* SCK used Label
+#define AT91C_US_SCK_USED (AT91C_US_CKLO | AT91C_US_CLKS_EXT)
+
+//* Standard ISO T=0 Mode : 8 bits , 1 stop , parity
+#define AT91C_US_ISO_READER_MODE ( AT91C_US_USMODE_ISO7816_0 + \
+					   		 AT91C_US_CLKS_CLOCK +\
+                       		 AT91C_US_NBSTOP_1_BIT + \
+                       		 AT91C_US_PAR_EVEN + \
+                       		 AT91C_US_CHRL_8_BITS + \
+                       		 AT91C_US_CKLO +\
+                       		 AT91C_US_OVER)
+
+//* Standard IRDA mode
+#define AT91C_US_ASYNC_IRDA_MODE (  AT91C_US_USMODE_IRDA + \
+                            AT91C_US_NBSTOP_1_BIT + \
+                            AT91C_US_PAR_NONE + \
+                            AT91C_US_CHRL_8_BITS + \
+                            AT91C_US_CLKS_CLOCK )
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_Baudrate
+//* \brief Caluculate baud_value according to the main clock and the baud rate
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_US_Baudrate (
+	const unsigned int main_clock, // \arg peripheral clock
+	const unsigned int baud_rate)  // \arg UART baudrate
+{
+	unsigned int baud_value = ((main_clock*10)/(baud_rate * 16));
+	if ((baud_value % 10) >= 5)
+		baud_value = (baud_value / 10) + 1;
+	else
+		baud_value /= 10;
+	return baud_value;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_SetBaudrate
+//* \brief Set the baudrate according to the CPU clock
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_SetBaudrate (
+	AT91PS_USART pUSART,    // \arg pointer to a USART controller
+	unsigned int mainClock, // \arg peripheral clock
+	unsigned int speed)     // \arg UART baudrate
+{
+	//* Define the baud rate divisor register
+	pUSART->US_BRGR = AT91F_US_Baudrate(mainClock, speed);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_SetTimeguard
+//* \brief Set USART timeguard
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_SetTimeguard (
+	AT91PS_USART pUSART,    // \arg pointer to a USART controller
+	unsigned int timeguard) // \arg timeguard value
+{
+	//* Write the Timeguard Register
+	pUSART->US_TTGR = timeguard ;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_EnableIt
+//* \brief Enable USART IT
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_EnableIt (
+	AT91PS_USART pUSART, // \arg pointer to a USART controller
+	unsigned int flag)   // \arg IT to be enabled
+{
+	//* Write to the IER register
+	pUSART->US_IER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_DisableIt
+//* \brief Disable USART IT
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_DisableIt (
+	AT91PS_USART pUSART, // \arg pointer to a USART controller
+	unsigned int flag)   // \arg IT to be disabled
+{
+	//* Write to the IER register
+	pUSART->US_IDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_Configure
+//* \brief Configure USART
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_Configure (
+	AT91PS_USART pUSART,     // \arg pointer to a USART controller
+	unsigned int mainClock,  // \arg peripheral clock
+	unsigned int mode ,      // \arg mode Register to be programmed
+	unsigned int baudRate ,  // \arg baudrate to be programmed
+	unsigned int timeguard ) // \arg timeguard to be programmed
+{
+    //* Disable interrupts
+    pUSART->US_IDR = (unsigned int) -1;
+
+    //* Reset receiver and transmitter
+    pUSART->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RXDIS | AT91C_US_TXDIS ;
+
+	//* Define the baud rate divisor register
+	AT91F_US_SetBaudrate(pUSART, mainClock, baudRate);
+
+	//* Write the Timeguard Register
+	AT91F_US_SetTimeguard(pUSART, timeguard);
+
+    //* Clear Transmit and Receive Counters
+    AT91F_PDC_Open((AT91PS_PDC) &(pUSART->US_RPR));
+
+    //* Define the USART mode
+    pUSART->US_MR = mode  ;
+
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_EnableRx
+//* \brief Enable receiving characters
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_EnableRx (
+	AT91PS_USART pUSART)     // \arg pointer to a USART controller
+{
+    //* Enable receiver
+    pUSART->US_CR = AT91C_US_RXEN;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_EnableTx
+//* \brief Enable sending characters
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_EnableTx (
+	AT91PS_USART pUSART)     // \arg pointer to a USART controller
+{
+    //* Enable  transmitter
+    pUSART->US_CR = AT91C_US_TXEN;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_ResetRx
+//* \brief Reset Receiver and re-enable it
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_ResetRx (
+	AT91PS_USART pUSART)     // \arg pointer to a USART controller
+{
+	//* Reset receiver
+	pUSART->US_CR = AT91C_US_RSTRX;
+    //* Re-Enable receiver
+    pUSART->US_CR = AT91C_US_RXEN;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_ResetTx
+//* \brief Reset Transmitter and re-enable it
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_ResetTx (
+	AT91PS_USART pUSART)     // \arg pointer to a USART controller
+{
+	//* Reset transmitter
+	pUSART->US_CR = AT91C_US_RSTTX;
+    //* Enable transmitter
+    pUSART->US_CR = AT91C_US_TXEN;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_DisableRx
+//* \brief Disable Receiver
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_DisableRx (
+	AT91PS_USART pUSART)     // \arg pointer to a USART controller
+{
+    //* Disable receiver
+    pUSART->US_CR = AT91C_US_RXDIS;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_DisableTx
+//* \brief Disable Transmitter
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_DisableTx (
+	AT91PS_USART pUSART)     // \arg pointer to a USART controller
+{
+    //* Disable transmitter
+    pUSART->US_CR = AT91C_US_TXDIS;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_Close
+//* \brief Close USART: disable IT disable receiver and transmitter, close PDC
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_Close (
+	AT91PS_USART pUSART)     // \arg pointer to a USART controller
+{
+    //* Reset the baud rate divisor register
+    pUSART->US_BRGR = 0 ;
+
+    //* Reset the USART mode
+    pUSART->US_MR = 0  ;
+
+    //* Reset the Timeguard Register
+    pUSART->US_TTGR = 0;
+
+    //* Disable all interrupts
+    pUSART->US_IDR = 0xFFFFFFFF ;
+
+    //* Abort the Peripheral Data Transfers
+    AT91F_PDC_Close((AT91PS_PDC) &(pUSART->US_RPR));
+
+    //* Disable receiver and transmitter and stop any activity immediately
+    pUSART->US_CR = AT91C_US_TXDIS | AT91C_US_RXDIS | AT91C_US_RSTTX | AT91C_US_RSTRX ;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_TxReady
+//* \brief Return 1 if a character can be written in US_THR
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_US_TxReady (
+	AT91PS_USART pUSART )     // \arg pointer to a USART controller
+{
+    return (pUSART->US_CSR & AT91C_US_TXRDY);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_RxReady
+//* \brief Return 1 if a character can be read in US_RHR
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_US_RxReady (
+	AT91PS_USART pUSART )     // \arg pointer to a USART controller
+{
+    return (pUSART->US_CSR & AT91C_US_RXRDY);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_Error
+//* \brief Return the error flag
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_US_Error (
+	AT91PS_USART pUSART )     // \arg pointer to a USART controller
+{
+    return (pUSART->US_CSR &
+    	(AT91C_US_OVRE |  // Overrun error
+    	 AT91C_US_FRAME | // Framing error
+    	 AT91C_US_PARE));  // Parity error
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_PutChar
+//* \brief Send a character,does not check if ready to send
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_PutChar (
+	AT91PS_USART pUSART,
+	int character )
+{
+    pUSART->US_THR = (character & 0x1FF);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_GetChar
+//* \brief Receive a character,does not check if a character is available
+//*----------------------------------------------------------------------------
+static inline int AT91F_US_GetChar (
+	const AT91PS_USART pUSART)
+{
+    return((pUSART->US_RHR) & 0x1FF);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_SendFrame
+//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_US_SendFrame(
+	AT91PS_USART pUSART,
+	char *pBuffer,
+	unsigned int szBuffer,
+	char *pNextBuffer,
+	unsigned int szNextBuffer )
+{
+	return AT91F_PDC_SendFrame(
+		(AT91PS_PDC) &(pUSART->US_RPR),
+		pBuffer,
+		szBuffer,
+		pNextBuffer,
+		szNextBuffer);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_ReceiveFrame
+//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_US_ReceiveFrame (
+	AT91PS_USART pUSART,
+	char *pBuffer,
+	unsigned int szBuffer,
+	char *pNextBuffer,
+	unsigned int szNextBuffer )
+{
+	return AT91F_PDC_ReceiveFrame(
+		(AT91PS_PDC) &(pUSART->US_RPR),
+		pBuffer,
+		szBuffer,
+		pNextBuffer,
+		szNextBuffer);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US_SetIrdaFilter
+//* \brief Set the value of IrDa filter tregister
+//*----------------------------------------------------------------------------
+static inline void AT91F_US_SetIrdaFilter (
+	AT91PS_USART pUSART,
+	unsigned char value
+)
+{
+	pUSART->US_IF = value;
+}
+
+/* *****************************************************************************
+                SOFTWARE API FOR MCI
+   ***************************************************************************** */
+//* Classic MCI Mode Register Configuration with PDC mode enabled and MCK = MCI Clock
+#define AT91C_MCI_MR_PDCMODE	(AT91C_MCI_CLKDIV |\
+                                AT91C_MCI_PWSDIV |\
+                                (AT91C_MCI_PWSDIV<<1) |\
+                                AT91C_MCI_PDCMODE)
+
+//* Classic MCI Data Timeout Register Configuration with 1048576 MCK cycles between 2 data transfer
+#define AT91C_MCI_DTOR_1MEGA_CYCLES	(AT91C_MCI_DTOCYC | AT91C_MCI_DTOMUL)
+
+//* Classic MCI SDCard Register Configuration with 1-bit data bus on slot A
+#define AT91C_MCI_MMC_SLOTA	(AT91C_MCI_SCDSEL & 0x0)
+
+//* Classic MCI SDCard Register Configuration with 1-bit data bus on slot B
+#define AT91C_MCI_MMC_SLOTB	(AT91C_MCI_SCDSEL)
+
+//* Classic MCI SDCard Register Configuration with 4-bit data bus on slot A
+#define AT91C_MCI_SDCARD_4BITS_SLOTA	( (AT91C_MCI_SCDSEL & 0x0) | AT91C_MCI_SCDBUS )
+
+//* Classic MCI SDCard Register Configuration with 4-bit data bus on slot B
+#define AT91C_MCI_SDCARD_4BITS_SLOTB	(AT91C_MCI_SCDSEL | AT91C_MCI_SCDBUS)
+
+
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_Configure
+//* \brief Configure the MCI
+//*----------------------------------------------------------------------------
+static inline void AT91F_MCI_Configure (
+        AT91PS_MCI pMCI,  			 // \arg pointer to a MCI controller
+        unsigned int DTOR_register,  // \arg Data Timeout Register to be programmed
+        unsigned int MR_register,  	 // \arg Mode Register to be programmed
+        unsigned int SDCR_register)  // \arg SDCard Register to be programmed
+{
+    //* Reset the MCI
+    pMCI->MCI_CR = AT91C_MCI_MCIEN | AT91C_MCI_PWSEN;
+
+    //* Disable all the interrupts
+    pMCI->MCI_IDR = 0xFFFFFFFF;
+
+    //* Set the Data Timeout Register
+    pMCI->MCI_DTOR = DTOR_register;
+
+    //* Set the Mode Register
+    pMCI->MCI_MR = MR_register;
+
+    //* Set the SDCard Register
+    pMCI->MCI_SDCR = SDCR_register;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_EnableIt
+//* \brief Enable MCI IT
+//*----------------------------------------------------------------------------
+static inline void AT91F_MCI_EnableIt (
+        AT91PS_MCI pMCI, // \arg pointer to a MCI controller
+        unsigned int flag)   // \arg IT to be enabled
+{
+    //* Write to the IER register
+    pMCI->MCI_IER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_DisableIt
+//* \brief Disable MCI IT
+//*----------------------------------------------------------------------------
+static inline void AT91F_MCI_DisableIt (
+        AT91PS_MCI pMCI, // \arg pointer to a MCI controller
+        unsigned int flag)   // \arg IT to be disabled
+{
+    //* Write to the IDR register
+    pMCI->MCI_IDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_Enable_Interface
+//* \brief Enable the MCI Interface
+//*----------------------------------------------------------------------------
+static inline void AT91F_MCI_Enable_Interface (
+        AT91PS_MCI pMCI)     // \arg pointer to a MCI controller
+{
+    //* Enable the MCI
+    pMCI->MCI_CR = AT91C_MCI_MCIEN;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_Disable_Interface
+//* \brief Disable the MCI Interface
+//*----------------------------------------------------------------------------
+static inline void AT91F_MCI_Disable_Interface (
+        AT91PS_MCI pMCI)     // \arg pointer to a MCI controller
+{
+    //* Disable the MCI
+    pMCI->MCI_CR = AT91C_MCI_MCIDIS;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_Cfg_ModeRegister
+//* \brief Configure the MCI Mode Register
+//*----------------------------------------------------------------------------
+static inline void AT91F_MCI_Cfg_ModeRegister (
+        AT91PS_MCI pMCI, // \arg pointer to a MCI controller
+        unsigned int mode_register)   // \arg value to set in the mode register
+{
+    //* Configure the MCI MR
+    pMCI->MCI_MR = mode_register;
+}
+/* *****************************************************************************
+                SOFTWARE API FOR AIC
+   ***************************************************************************** */
+#define AT91C_AIC_BRANCH_OPCODE ((void (*) ()) 0xE51FFF20) // ldr, pc, [pc, #-&F20]
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_AIC_ConfigureIt
+//* \brief Interrupt Handler Initialization
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_AIC_ConfigureIt (
+	AT91PS_AIC pAic,  // \arg pointer to the AIC registers
+	unsigned int irq_id,     // \arg interrupt number to initialize
+	unsigned int priority,   // \arg priority to give to the interrupt
+	unsigned int src_type,   // \arg activation and sense of activation
+	void (*newHandler) (void) ) // \arg address of the interrupt handler
+{
+	unsigned int oldHandler;
+    unsigned int mask ;
+
+    oldHandler = pAic->AIC_SVR[irq_id];
+
+    mask = 0x1 << irq_id ;
+    //* Disable the interrupt on the interrupt controller
+    pAic->AIC_IDCR = mask ;
+    //* Save the interrupt handler routine pointer and the interrupt priority
+    pAic->AIC_SVR[irq_id] = (unsigned int) newHandler ;
+    //* Store the Source Mode Register
+    pAic->AIC_SMR[irq_id] = src_type | priority  ;
+    //* Clear the interrupt on the interrupt controller
+    pAic->AIC_ICCR = mask ;
+
+	return oldHandler;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_AIC_EnableIt
+//* \brief Enable corresponding IT number
+//*----------------------------------------------------------------------------
+static inline void AT91F_AIC_EnableIt (
+	AT91PS_AIC pAic,      // \arg pointer to the AIC registers
+	unsigned int irq_id ) // \arg interrupt number to initialize
+{
+    //* Enable the interrupt on the interrupt controller
+    pAic->AIC_IECR = 0x1 << irq_id ;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_AIC_DisableIt
+//* \brief Disable corresponding IT number
+//*----------------------------------------------------------------------------
+static inline void AT91F_AIC_DisableIt (
+	AT91PS_AIC pAic,      // \arg pointer to the AIC registers
+	unsigned int irq_id ) // \arg interrupt number to initialize
+{
+    unsigned int mask = 0x1 << irq_id;
+    //* Disable the interrupt on the interrupt controller
+    pAic->AIC_IDCR = mask ;
+    //* Clear the interrupt on the Interrupt Controller ( if one is pending )
+    pAic->AIC_ICCR = mask ;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_AIC_ClearIt
+//* \brief Clear corresponding IT number
+//*----------------------------------------------------------------------------
+static inline void AT91F_AIC_ClearIt (
+	AT91PS_AIC pAic,     // \arg pointer to the AIC registers
+	unsigned int irq_id) // \arg interrupt number to initialize
+{
+    //* Clear the interrupt on the Interrupt Controller ( if one is pending )
+    pAic->AIC_ICCR = (0x1 << irq_id);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_AIC_AcknowledgeIt
+//* \brief Acknowledge corresponding IT number
+//*----------------------------------------------------------------------------
+static inline void AT91F_AIC_AcknowledgeIt (
+	AT91PS_AIC pAic)     // \arg pointer to the AIC registers
+{
+    pAic->AIC_EOICR = pAic->AIC_EOICR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_AIC_SetExceptionVector
+//* \brief Configure vector handler
+//*----------------------------------------------------------------------------
+static inline unsigned int  AT91F_AIC_SetExceptionVector (
+	unsigned int *pVector, // \arg pointer to the AIC registers
+	void (*Handler) () )   // \arg Interrupt Handler
+{
+	unsigned int oldVector = *pVector;
+
+	if ((unsigned int) Handler == (unsigned int) AT91C_AIC_BRANCH_OPCODE)
+		*pVector = (unsigned int) AT91C_AIC_BRANCH_OPCODE;
+	else
+		*pVector = (((((unsigned int) Handler) - ((unsigned int) pVector) - 0x8) >> 2) & 0x00FFFFFF) | 0xEA000000;
+
+	return oldVector;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_AIC_Trig
+//* \brief Trig an IT
+//*----------------------------------------------------------------------------
+static inline void  AT91F_AIC_Trig (
+	AT91PS_AIC pAic,     // \arg pointer to the AIC registers
+	unsigned int irq_id) // \arg interrupt number
+{
+	pAic->AIC_ISCR = (0x1 << irq_id) ;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_AIC_IsActive
+//* \brief Test if an IT is active
+//*----------------------------------------------------------------------------
+static inline unsigned int  AT91F_AIC_IsActive (
+	AT91PS_AIC pAic,     // \arg pointer to the AIC registers
+	unsigned int irq_id) // \arg Interrupt Number
+{
+	return (pAic->AIC_ISR & (0x1 << irq_id));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_AIC_IsPending
+//* \brief Test if an IT is pending
+//*----------------------------------------------------------------------------
+static inline unsigned int  AT91F_AIC_IsPending (
+	AT91PS_AIC pAic,     // \arg pointer to the AIC registers
+	unsigned int irq_id) // \arg Interrupt Number
+{
+	return (pAic->AIC_IPR & (0x1 << irq_id));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_AIC_Open
+//* \brief Set exception vectors and AIC registers to default values
+//*----------------------------------------------------------------------------
+static inline void AT91F_AIC_Open(
+	AT91PS_AIC pAic,        // \arg pointer to the AIC registers
+	void (*IrqHandler) (),  // \arg Default IRQ vector exception
+	void (*FiqHandler) (),  // \arg Default FIQ vector exception
+	void (*DefaultHandler)  (), // \arg Default Handler set in ISR
+	void (*SpuriousHandler) (), // \arg Default Spurious Handler
+	unsigned int protectMode)   // \arg Debug Control Register
+{
+	int i;
+
+	// Disable all interrupts and set IVR to the default handler
+	for (i = 0; i < 32; ++i) {
+		AT91F_AIC_DisableIt(pAic, i);
+		AT91F_AIC_ConfigureIt(pAic, i, AT91C_AIC_PRIOR_LOWEST, AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, DefaultHandler);
+	}
+
+	// Set the IRQ exception vector
+	AT91F_AIC_SetExceptionVector((unsigned int *) 0x18, IrqHandler);
+	// Set the Fast Interrupt exception vector
+	AT91F_AIC_SetExceptionVector((unsigned int *) 0x1C, FiqHandler);
+
+	pAic->AIC_SPU = (unsigned int) SpuriousHandler;
+	pAic->AIC_DCR = protectMode;
+}
+/* *****************************************************************************
+                SOFTWARE API FOR UDP
+   ***************************************************************************** */
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_EnableIt
+//* \brief Enable UDP IT
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_EnableIt (
+	AT91PS_UDP pUDP,     // \arg pointer to a UDP controller
+	unsigned int flag)   // \arg IT to be enabled
+{
+	//* Write to the IER register
+	pUDP->UDP_IER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_DisableIt
+//* \brief Disable UDP IT
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_DisableIt (
+	AT91PS_UDP pUDP,     // \arg pointer to a UDP controller
+	unsigned int flag)   // \arg IT to be disabled
+{
+	//* Write to the IDR register
+	pUDP->UDP_IDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_SetAddress
+//* \brief Set UDP functional address
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_SetAddress (
+	AT91PS_UDP pUDP,     // \arg pointer to a UDP controller
+	unsigned char address)   // \arg new UDP address
+{
+	pUDP->UDP_FADDR = (AT91C_UDP_FEN | address);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_EnableEp
+//* \brief Enable Endpoint
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_EnableEp (
+	AT91PS_UDP pUDP,     // \arg pointer to a UDP controller
+	unsigned int flag)   // \arg endpoints to be enabled
+{
+	pUDP->UDP_GLBSTATE  |= flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_DisableEp
+//* \brief Enable Endpoint
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_DisableEp (
+	AT91PS_UDP pUDP,     // \arg pointer to a UDP controller
+	unsigned int flag)   // \arg endpoints to be enabled
+{
+	pUDP->UDP_GLBSTATE  &= ~(flag);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_SetState
+//* \brief Set UDP Device state
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_SetState (
+	AT91PS_UDP pUDP,     // \arg pointer to a UDP controller
+	unsigned int flag)   // \arg new UDP address
+{
+	pUDP->UDP_GLBSTATE  &= ~(AT91C_UDP_FADDEN | AT91C_UDP_CONFG);
+	pUDP->UDP_GLBSTATE  |= flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_GetState
+//* \brief return UDP Device state
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_UDP_GetState ( // \return the UDP device state
+	AT91PS_UDP pUDP)     // \arg pointer to a UDP controller
+{
+	return (pUDP->UDP_GLBSTATE  & (AT91C_UDP_FADDEN | AT91C_UDP_CONFG));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_ResetEp
+//* \brief Reset UDP endpoint
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_ResetEp ( // \return the UDP device state
+	AT91PS_UDP pUDP,     // \arg pointer to a UDP controller
+	unsigned int flag)   // \arg Endpoints to be reset
+{
+	pUDP->UDP_RSTEP = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_EpStall
+//* \brief Endpoint will STALL requests
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_EpStall(
+	AT91PS_UDP pUDP,     // \arg pointer to a UDP controller
+	unsigned char endpoint)   // \arg endpoint number
+{
+	pUDP->UDP_CSR[endpoint] |= AT91C_UDP_FORCESTALL;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_EpWrite
+//* \brief Write value in the DPR
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_EpWrite(
+	AT91PS_UDP pUDP,         // \arg pointer to a UDP controller
+	unsigned char endpoint,  // \arg endpoint number
+	unsigned char value)     // \arg value to be written in the DPR
+{
+	pUDP->UDP_FDR[endpoint] = value;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_EpRead
+//* \brief Return value from the DPR
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_UDP_EpRead(
+	AT91PS_UDP pUDP,         // \arg pointer to a UDP controller
+	unsigned char endpoint)  // \arg endpoint number
+{
+	return pUDP->UDP_FDR[endpoint];
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_EpEndOfWr
+//* \brief Notify the UDP that values in DPR are ready to be sent
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_EpEndOfWr(
+	AT91PS_UDP pUDP,         // \arg pointer to a UDP controller
+	unsigned char endpoint)  // \arg endpoint number
+{
+	pUDP->UDP_CSR[endpoint] |= AT91C_UDP_TXPKTRDY;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_EpClear
+//* \brief Clear flag in the endpoint CSR register
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_EpClear(
+	AT91PS_UDP pUDP,         // \arg pointer to a UDP controller
+	unsigned char endpoint,  // \arg endpoint number
+	unsigned int flag)       // \arg flag to be cleared
+{
+	pUDP->UDP_CSR[endpoint] &= ~(flag);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_EpSet
+//* \brief Set flag in the endpoint CSR register
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_EpSet(
+	AT91PS_UDP pUDP,         // \arg pointer to a UDP controller
+	unsigned char endpoint,  // \arg endpoint number
+	unsigned int flag)       // \arg flag to be cleared
+{
+	pUDP->UDP_CSR[endpoint] |= flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_EpStatus
+//* \brief Return the endpoint CSR register
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_UDP_EpStatus(
+	AT91PS_UDP pUDP,         // \arg pointer to a UDP controller
+	unsigned char endpoint)  // \arg endpoint number
+{
+	return pUDP->UDP_CSR[endpoint];
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_GetInterruptMaskStatus
+//* \brief Return UDP Interrupt Mask Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_UDP_GetInterruptMaskStatus( // \return UDP Interrupt Mask Status
+        AT91PS_UDP pUdp) // \arg  pointer to a UDP controller
+{
+        return pUdp->UDP_IMR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_IsInterruptMasked
+//* \brief Test if UDP Interrupt is Masked 
+//*----------------------------------------------------------------------------
+static inline int AT91F_UDP_IsInterruptMasked(
+        AT91PS_UDP pUdp,   // \arg  pointer to a UDP controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_UDP_GetInterruptMaskStatus(pUdp) & flag);
+}
+
+/* *****************************************************************************
+                SOFTWARE API FOR ST
+   ***************************************************************************** */
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_ST_SetPeriodInterval
+//* \brief Set Periodic Interval Interrupt (period in ms)
+//*----------------------------------------------------------------------------
+static inline void AT91F_ST_SetPeriodInterval(
+	AT91PS_ST pSt,
+	unsigned int period)
+{
+	volatile int status;
+	pSt->ST_IDR = AT91C_ST_PITS;			/* Interrupt disable Register */
+
+	status = pSt->ST_SR;
+    pSt->ST_PIMR = period << 5;   			/* Period Interval Mode Register == timer interval = 1ms*/
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_ST_EnableIt
+//* \brief Enable system timer interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_ST_EnableIt(
+	AT91PS_ST pSt,
+	unsigned int flag)
+{
+	pSt->ST_IER = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_ST_DisableIt
+//* \brief Disable system timer interrupt
+//*----------------------------------------------------------------------------
+static inline void AT91F_ST_DisableIt(
+	AT91PS_ST pSt,
+	unsigned int flag)
+{
+	pSt->ST_IDR = flag;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_ST_GetInterruptMaskStatus
+//* \brief Return ST Interrupt Mask Status
+//*----------------------------------------------------------------------------
+static inline unsigned int AT91F_ST_GetInterruptMaskStatus( // \return ST Interrupt Mask Status
+        AT91PS_ST pSt) // \arg  pointer to a ST controller
+{
+        return pSt->ST_IMR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_ST_IsInterruptMasked
+//* \brief Test if ST Interrupt is Masked 
+//*----------------------------------------------------------------------------
+static inline int AT91F_ST_IsInterruptMasked(
+        AT91PS_ST pSt,   // \arg  pointer to a ST controller
+        unsigned int flag) // \arg  flag to be tested
+{
+        return (AT91F_ST_GetInterruptMaskStatus(pSt) & flag);
+}
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_EBI_CfgPIO
+//* \brief Configure PIO controllers to drive EBI signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_EBI_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOC, // PIO controller base address
+		((unsigned int) AT91C_PC8_A24     ) |
+		((unsigned int) AT91C_PC7_A23     ), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_DBGU_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  DBGU
+//*----------------------------------------------------------------------------
+static inline void AT91F_DBGU_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_SYS));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_DBGU_CfgPIO
+//* \brief Configure PIO controllers to drive DBGU signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_DBGU_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOA, // PIO controller base address
+		((unsigned int) AT91C_PA31_DTXD    ) |
+		((unsigned int) AT91C_PA30_DRXD    ), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SYS_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  SYS
+//*----------------------------------------------------------------------------
+static inline void AT91F_SYS_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_SYS));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UHP_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  UHP
+//*----------------------------------------------------------------------------
+static inline void AT91F_UHP_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_UHP));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SDRC_CfgPIO
+//* \brief Configure PIO controllers to drive SDRC signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_SDRC_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOC, // PIO controller base address
+		((unsigned int) AT91C_PC20_D20     ) |
+		((unsigned int) AT91C_PC21_D21     ) |
+		((unsigned int) AT91C_PC30_D30     ) |
+		((unsigned int) AT91C_PC22_D22     ) |
+		((unsigned int) AT91C_PC31_D31     ) |
+		((unsigned int) AT91C_PC23_D23     ) |
+		((unsigned int) AT91C_PC16_D16     ) |
+		((unsigned int) AT91C_PC24_D24     ) |
+		((unsigned int) AT91C_PC17_D17     ) |
+		((unsigned int) AT91C_PC25_D25     ) |
+		((unsigned int) AT91C_PC18_D18     ) |
+		((unsigned int) AT91C_PC26_D26     ) |
+		((unsigned int) AT91C_PC19_D19     ) |
+		((unsigned int) AT91C_PC27_D27     ) |
+		((unsigned int) AT91C_PC28_D28     ) |
+		((unsigned int) AT91C_PC29_D29     ), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_EMAC_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  EMAC
+//*----------------------------------------------------------------------------
+static inline void AT91F_EMAC_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_EMAC));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_EMAC_CfgPIO
+//* \brief Configure PIO controllers to drive EMAC signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_EMAC_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOA, // PIO controller base address
+		((unsigned int) AT91C_PA14_ERXER   ) |
+		((unsigned int) AT91C_PA12_ERX0    ) |
+		((unsigned int) AT91C_PA13_ERX1    ) |
+		((unsigned int) AT91C_PA8_ETXEN   ) |
+		((unsigned int) AT91C_PA16_EMDIO   ) |
+		((unsigned int) AT91C_PA9_ETX0    ) |
+		((unsigned int) AT91C_PA10_ETX1    ) |
+		((unsigned int) AT91C_PA11_ECRS_ECRSDV) |
+		((unsigned int) AT91C_PA15_EMDC    ) |
+		((unsigned int) AT91C_PA7_ETXCK_EREFCK), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_RTC_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  RTC
+//*----------------------------------------------------------------------------
+static inline void AT91F_RTC_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_SYS));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC2_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  SSC2
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC2_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_SSC2));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC2_CfgPIO
+//* \brief Configure PIO controllers to drive SSC2 signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC2_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOB, // PIO controller base address
+		((unsigned int) AT91C_PB12_TF2     ) |
+		((unsigned int) AT91C_PB17_RF2     ) |
+		((unsigned int) AT91C_PB13_TK2     ) |
+		((unsigned int) AT91C_PB16_RK2     ) |
+		((unsigned int) AT91C_PB14_TD2     ) |
+		((unsigned int) AT91C_PB15_RD2     ), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC1_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  SSC1
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC1_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_SSC1));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC1_CfgPIO
+//* \brief Configure PIO controllers to drive SSC1 signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC1_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOB, // PIO controller base address
+		((unsigned int) AT91C_PB11_RF1     ) |
+		((unsigned int) AT91C_PB10_RK1     ) |
+		((unsigned int) AT91C_PB8_TD1     ) |
+		((unsigned int) AT91C_PB9_RD1     ), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SSC0_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  SSC0
+//*----------------------------------------------------------------------------
+static inline void AT91F_SSC0_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_SSC0));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  SPI
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_SPI));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SPI_CfgPIO
+//* \brief Configure PIO controllers to drive SPI signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_SPI_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOA, // PIO controller base address
+		((unsigned int) AT91C_PA3_NPCS0   ) |
+		((unsigned int) AT91C_PA4_NPCS1   ) |
+		((unsigned int) AT91C_PA1_MOSI    ) |
+		((unsigned int) AT91C_PA5_NPCS2   ) |
+		((unsigned int) AT91C_PA6_NPCS3   ) |
+		((unsigned int) AT91C_PA0_MISO    ) |
+		((unsigned int) AT91C_PA2_SPCK    ), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TC5_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  TC5
+//*----------------------------------------------------------------------------
+static inline void AT91F_TC5_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_TC5));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TC4_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  TC4
+//*----------------------------------------------------------------------------
+static inline void AT91F_TC4_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_TC4));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TC3_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  TC3
+//*----------------------------------------------------------------------------
+static inline void AT91F_TC3_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_TC3));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TC2_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  TC2
+//*----------------------------------------------------------------------------
+static inline void AT91F_TC2_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_TC2));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TC1_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  TC1
+//*----------------------------------------------------------------------------
+static inline void AT91F_TC1_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_TC1));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TC0_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  TC0
+//*----------------------------------------------------------------------------
+static inline void AT91F_TC0_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_TC0));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_SMC2_CfgPIO
+//* \brief Configure PIO controllers to drive SMC2 signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_SMC2_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOC, // PIO controller base address
+		((unsigned int) AT91C_PC10_NCS4_CFCS) |
+		((unsigned int) AT91C_PC9_A25_CFRNW) |
+		((unsigned int) AT91C_PC12_NCS6_CFCE2) |
+		((unsigned int) AT91C_PC11_NCS5_CFCE1), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PMC_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  PMC
+//*----------------------------------------------------------------------------
+static inline void AT91F_PMC_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_SYS));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PMC_CfgPIO
+//* \brief Configure PIO controllers to drive PMC signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_PMC_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOA, // PIO controller base address
+		0, // Peripheral A
+		((unsigned int) AT91C_PA24_PCK1    )); // Peripheral B
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOB, // PIO controller base address
+		((unsigned int) AT91C_PB27_PCK0    ), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIOD_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  PIOD
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIOD_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_PIOD));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIOC_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  PIOC
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIOC_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_PIOC));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIOB_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  PIOB
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIOB_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_PIOB));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_PIOA_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  PIOA
+//*----------------------------------------------------------------------------
+static inline void AT91F_PIOA_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_PIOA));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TWI_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  TWI
+//*----------------------------------------------------------------------------
+static inline void AT91F_TWI_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_TWI));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_TWI_CfgPIO
+//* \brief Configure PIO controllers to drive TWI signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_TWI_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOA, // PIO controller base address
+		((unsigned int) AT91C_PA25_TWD     ) |
+		((unsigned int) AT91C_PA26_TWCK    ), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US3_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  US3
+//*----------------------------------------------------------------------------
+static inline void AT91F_US3_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_US3));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US2_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  US2
+//*----------------------------------------------------------------------------
+static inline void AT91F_US2_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_US2));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US2_CfgPIO
+//* \brief Configure PIO controllers to drive US2 signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_US2_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOA, // PIO controller base address
+		((unsigned int) AT91C_PA23_TXD2    ) |
+		((unsigned int) AT91C_PA22_RXD2    ), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US1_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  US1
+//*----------------------------------------------------------------------------
+static inline void AT91F_US1_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_US1));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US1_CfgPIO
+//* \brief Configure PIO controllers to drive US1 signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_US1_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOB, // PIO controller base address
+		((unsigned int) AT91C_PB21_RXD1    ) |
+		((unsigned int) AT91C_PB26_RTS1    ) |
+		((unsigned int) AT91C_PB25_DSR1    ) |
+		((unsigned int) AT91C_PB24_CTS1    ) |
+		((unsigned int) AT91C_PB19_DTR1    ) |
+		((unsigned int) AT91C_PB23_DCD1    ) |
+		((unsigned int) AT91C_PB20_TXD1    ) |
+		((unsigned int) AT91C_PB18_RI1     ), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US0_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  US0
+//*----------------------------------------------------------------------------
+static inline void AT91F_US0_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_US0));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_US0_CfgPIO
+//* \brief Configure PIO controllers to drive US0 signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_US0_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOA, // PIO controller base address
+		((unsigned int) AT91C_PA17_TXD0    ) |
+		((unsigned int) AT91C_PA21_RTS0    ) |
+		((unsigned int) AT91C_PA19_SCK0    ) |
+		((unsigned int) AT91C_PA20_CTS0    ), // Peripheral A
+		0); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  MCI
+//*----------------------------------------------------------------------------
+static inline void AT91F_MCI_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_MCI));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_CfgPIO
+//* \brief Configure PIO controllers to drive MCI signals
+//*----------------------------------------------------------------------------
+static inline void AT91F_MCI_CfgPIO (void)
+{
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOA, // PIO controller base address
+		((unsigned int) AT91C_PA28_MCCDA   ) |
+		((unsigned int) AT91C_PA29_MCDA0   ) |
+		((unsigned int) AT91C_PA27_MCCK    ), // Peripheral A
+		0); // Peripheral B
+	// Configure PIO controllers to periph mode
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOB, // PIO controller base address
+		0, // Peripheral A
+		((unsigned int) AT91C_PB5_MCDA3   ) |
+		((unsigned int) AT91C_PB3_MCDA1   ) |
+		((unsigned int) AT91C_PB4_MCDA2   )); // Peripheral B
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_AIC_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  AIC
+//*----------------------------------------------------------------------------
+static inline void AT91F_AIC_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_IRQ4) |
+		((unsigned int) 1 << AT91C_ID_FIQ) |
+		((unsigned int) 1 << AT91C_ID_IRQ5) |
+		((unsigned int) 1 << AT91C_ID_IRQ6) |
+		((unsigned int) 1 << AT91C_ID_IRQ0) |
+		((unsigned int) 1 << AT91C_ID_IRQ1) |
+		((unsigned int) 1 << AT91C_ID_IRQ2) |
+		((unsigned int) 1 << AT91C_ID_IRQ3));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UDP_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  UDP
+//*----------------------------------------------------------------------------
+static inline void AT91F_UDP_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_UDP));
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_ST_CfgPMC
+//* \brief Enable Peripheral clock in PMC for  ST
+//*----------------------------------------------------------------------------
+static inline void AT91F_ST_CfgPMC (void)
+{
+	AT91F_PMC_EnablePeriphClock(
+		AT91C_BASE_PMC, // PIO controller base address
+		((unsigned int) 1 << AT91C_ID_SYS));
+}
+
+#endif // lib_AT91RM9200_H
diff --git a/target/linux/at91/image/dfboot/src/init.c b/target/linux/at91/image/dfboot/src/init.c
new file mode 100644
index 0000000..4088973
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/init.c
@@ -0,0 +1,165 @@
+//*----------------------------------------------------------------------------
+//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
+//*----------------------------------------------------------------------------
+//* The software is delivered "AS IS" without warranty or condition of any
+//* kind, either express, implied or statutory. This includes without
+//* limitation any warranty or condition with respect to merchantability or
+//* fitness for any particular purpose, or against the infringements of
+//* intellectual property rights of others.
+//*----------------------------------------------------------------------------
+//* File Name           : init.c
+//* Object              : Low level initialisations written in C
+//* Creation            : HIi   10/10/2003
+//*
+//*----------------------------------------------------------------------------
+#include "config.h"
+#include "AT91RM9200.h"
+#include "lib_AT91RM9200.h"
+#include "stdio.h"
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_DataAbort
+//* \brief This function reports an Abort
+//*----------------------------------------------------------------------------
+static void AT91F_SpuriousHandler() 
+{
+	puts("ISI");
+	while (1);
+}
+
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_DataAbort
+//* \brief This function reports an Abort
+//*----------------------------------------------------------------------------
+static void AT91F_DataAbort() 
+{
+	puts("IDA");
+	while (1);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_FetchAbort
+//* \brief This function reports an Abort
+//*----------------------------------------------------------------------------
+static void AT91F_FetchAbort()
+{
+	puts("IFA");
+	while (1);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_UndefHandler
+//* \brief This function reports that no handler have been set for current IT
+//*----------------------------------------------------------------------------
+static void AT91F_UndefHandler() 
+{
+	puts("IUD");
+	while (1);
+}
+
+
+//*--------------------------------------------------------------------------------------
+//* Function Name       : AT91F_InitSdram
+//* Object              : Initialize the SDRAM
+//* Input Parameters    :
+//* Output Parameters   :
+//*--------------------------------------------------------------------------------------
+static void AT91F_InitSdram()
+{
+	int *pRegister;
+	
+	//* Configure PIOC as peripheral (D16/D31)
+	
+	AT91F_PIO_CfgPeriph(
+		AT91C_BASE_PIOC, // PIO controller base address
+		0xFFFF0030,
+		0
+	);
+	
+	//*Init SDRAM
+	pRegister = (int *)0xFFFFFF98;
+	*pRegister = 0x2188c155; 
+	pRegister = (int *)0xFFFFFF90;
+	*pRegister = 0x2; 
+	pRegister = (int *)0x20000000;
+	*pRegister = 0; 
+	pRegister = (int *)0xFFFFFF90;
+	*pRegister = 0x4; 
+	pRegister = (int *)0x20000000;
+	*pRegister = 0; 
+	*pRegister = 0; 
+	*pRegister = 0; 
+	*pRegister = 0; 
+	*pRegister = 0; 
+	*pRegister = 0; 
+	*pRegister = 0; 
+	*pRegister = 0; 
+	pRegister = (int *)0xFFFFFF90;
+	*pRegister = 0x3; 
+	pRegister = (int *)0x20000080;
+	*pRegister = 0; 
+
+	pRegister = (int *)0xFFFFFF94;
+	*pRegister = 0x2e0; 
+	pRegister = (int *)0x20000000;
+	*pRegister = 0; 
+
+	pRegister = (int *)0xFFFFFF90;
+	*pRegister = 0x00; 
+	pRegister = (int *)0x20000000;
+	*pRegister = 0; 
+}
+
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_InitFlash
+//* \brief This function performs low level HW initialization
+//*----------------------------------------------------------------------------
+static void AT91F_InitMemories()
+{
+	int *pEbi = (int *)0xFFFFFF60;
+
+	//* Setup MEMC to support all connected memories (CS0 = FLASH; CS1=SDRAM)
+	pEbi  = (int *)0xFFFFFF60;
+	*pEbi = 0x00000002;
+
+	//* CS0 cs for flash
+	pEbi  = (int *)0xFFFFFF70;
+	*pEbi = 0x00003284;
+	
+	AT91F_InitSdram();
+}
+
+
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_LowLevelInit
+//* \brief This function performs very low level HW initialization
+//*----------------------------------------------------------------------------
+void AT91F_LowLevelInit(void)
+{
+	int i;
+
+	// Init Interrupt Controller
+	AT91F_AIC_Open(
+		AT91C_BASE_AIC,          // pointer to the AIC registers
+		AT91C_AIC_BRANCH_OPCODE, // IRQ exception vector
+		AT91F_UndefHandler,      // FIQ exception vector
+		AT91F_UndefHandler,      // AIC default handler
+		AT91F_SpuriousHandler,   // AIC spurious handler
+		0);                      // Protect mode
+
+	// Perform 8 End Of Interrupt Command to make sýre AIC will not Lock out nIRQ 
+	for(i=0; i<8; i++)
+		AT91F_AIC_AcknowledgeIt(AT91C_BASE_AIC);
+
+	AT91F_AIC_SetExceptionVector((unsigned int *)0x0C, AT91F_FetchAbort);
+	AT91F_AIC_SetExceptionVector((unsigned int *)0x10, AT91F_DataAbort);
+	AT91F_AIC_SetExceptionVector((unsigned int *)0x4, AT91F_UndefHandler);
+
+	//Initialize SDRAM and Flash
+	AT91F_InitMemories();
+
+}
+
diff --git a/target/linux/at91/image/dfboot/src/jump.S b/target/linux/at91/image/dfboot/src/jump.S
new file mode 100644
index 0000000..cc69311
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/jump.S
@@ -0,0 +1,4 @@
+.global		Jump
+	
+Jump:		mov pc, r0				
+
diff --git a/target/linux/at91/image/dfboot/src/led.c b/target/linux/at91/image/dfboot/src/led.c
new file mode 100644
index 0000000..40d4911
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/led.c
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2006
+ * Atmel Nordic AB <www.atmel.com>
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <AT91RM9200.h>
+
+#define	GREEN_LED	AT91C_PIO_PB0
+#define	YELLOW_LED	AT91C_PIO_PB1
+#define	RED_LED	AT91C_PIO_PB2
+
+void	LED_set(unsigned int led)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+	PIOB->PIO_SODR		= (led ^ 0x7) & 0x7;		// All 0's => Set PIO high => OFF
+	PIOB->PIO_CODR		=  led & 0x7;			// All 1's => Set PIO low   => ON
+}
+
+void	green_LED_on(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+//	PIOB->PIO_CODR		= GREEN_LED;
+	PIOB->PIO_CODR		= (1 << 0);
+}
+
+void	 yellow_LED_on(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+//	PIOB->PIO_CODR		= YELLOW_LED;
+	PIOB->PIO_CODR		= (1 << 1);
+}
+
+void	 red_LED_on(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+//	PIOB->PIO_CODR		= RED_LED;
+	PIOB->PIO_CODR		= (1 << 2);
+}
+
+void	green_LED_off(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+//	PIOB->PIO_SODR		= GREEN_LED;
+	PIOB->PIO_SODR		= (1 << 0);
+}
+
+void	yellow_LED_off(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+//	PIOB->PIO_SODR		= YELLOW_LED;
+	PIOB->PIO_SODR		= (1 << 1);
+}
+
+void	red_LED_off(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+//	PIOB->PIO_SODR		= RED_LED;
+	PIOB->PIO_SODR		= (1 << 2);
+}
+
+void	LED_blink(unsigned int led)
+{
+	volatile int i,j;
+	for(i = 0; i < 5; i++) {
+		LED_set((1 << led)&0x7);
+		for(j= 0; j < 200000; j++);
+		LED_set(0);
+		for(j= 0; j < 200000; j++);
+	}		
+}
+
+
+void LED_init (void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+	AT91PS_PMC	PMC	= AT91C_BASE_PMC;
+	PMC->PMC_PCER		= (1 << AT91C_ID_PIOB);	// Enable PIOB clock
+	// Disable peripherals on LEDs
+	PIOB->PIO_PER		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+	// Enable pins as outputs
+	PIOB->PIO_OER		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+	// Turn all LEDs OFF
+	PIOB->PIO_SODR		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+}
diff --git a/target/linux/at91/image/dfboot/src/main.c b/target/linux/at91/image/dfboot/src/main.c
new file mode 100644
index 0000000..c0705de
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/main.c
@@ -0,0 +1,811 @@
+/*----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
+ *----------------------------------------------------------------------------
+ * The software is delivered "AS IS" without warranty or condition of any
+ * kind, either express, implied or statutory. This includes without
+ * limitation any warranty or condition with respect to merchantability or
+ * fitness for any particular purpose, or against the infringements of
+ * intellectual property rights of others.
+ *----------------------------------------------------------------------------
+ * File Name		: main.c
+ * Object		: 
+ * Creation		: HIi	10/10/2003
+ * Modif		: HIi	15/06/2004 :	add crc32 to verify the download
+ *                                          	from dataflash
+ *			: HIi	21/09/2004 :	Set first PLLA to 180Mhz and MCK to
+ *						60Mhz to speed up dataflash boot (15Mhz)
+ *			: MLC	12/04/2005 :	Modify SetPLL() to avoid errata
+ *			: USA	30/12/2005 :	Change to page Size 1056
+ *						Change startaddress to C0008400
+ *						Change SPI Speed to ~4 Mhz
+ *						Add retry on CRC Error
+ *----------------------------------------------------------------------------
+ */
+#include "config.h"
+#include "stdio.h"
+#include "AT91RM9200.h"
+#include "lib_AT91RM9200.h"
+#include "com.h"
+#include "main.h"
+#include "dataflash.h"
+#include "AT91C_MCI_Device.h"
+
+#define	DEBUGOUT
+#define XMODEM
+#define MEMDISP
+
+#ifdef	PAGESZ_1056
+#define	PAGESIZE	1056
+#else
+#define	PAGESIZE	1024
+#endif
+
+#define AT91C_SDRAM_START 0x20000000
+#define AT91C_BOOT_ADDR 0x21F00000
+#define AT91C_BOOT_SIZE 128*PAGESIZE
+#ifdef	PAGESZ_1056
+#define AT91C_BOOT_DATAFLASH_ADDR 0xC0008400
+#else
+#define AT91C_BOOT_DATAFLASH_ADDR 0xC0008000
+#endif
+#define AT91C_PLLA_VALUE 0x237A3E5A  // crystal= 18.432MHz - fixes BRG error at 115kbps
+//#define AT91C_PLLA_VALUE 0x2026BE04	// crystal= 18.432MHz
+//#define AT91C_PLLA_VALUE 0x202CBE01	// crystal= 4MHz
+
+
+
+#define DISP_LINE_LEN 16
+
+// Reason for boot failure
+#define	IMAGE_BAD_SIZE			0
+#define	IMAGE_READ_FAILURE	1
+#define	IMAGE_CRC_ERROR		2
+#define	IMAGE_ERROR			3
+#define	SUCCESS				-1
+
+/* prototypes*/
+extern void AT91F_ST_ASM_HANDLER(void);
+extern void Jump(unsigned int addr);
+
+const char *menu_dataflash[] = {
+#ifdef XMODEM
+	"1: P DFboot\n",
+	"2: P U-Boot\n",
+#endif
+	"3: P SDCard\n",
+#ifdef	PAGESZ_1056
+	"4: R UBOOT\n",
+#else
+	"4: R UBOOT\n",
+#endif
+#ifdef XMODEM
+	"5: P DF [addr]\n",
+#endif
+	"6: RD DF [addr]\n",
+	"7: E DF\n"
+};
+#ifdef XMODEM
+#define	MAXMENU 7
+#else
+#define MAXMENU 4
+#endif
+
+char message[20];
+#ifdef XMODEM
+volatile char XmodemComplete = 0;
+#endif
+unsigned int StTick = 0;
+
+AT91S_RomBoot const *pAT91;
+#ifdef XMODEM
+AT91S_SBuffer sXmBuffer;
+AT91S_SvcXmodem svcXmodem;
+AT91S_Pipe xmodemPipe;
+#endif
+AT91S_CtlTempo ctlTempo;
+
+
+//*--------------------------------------------------------------------------------------
+//* Function Name       : GetTickCount()
+//* Object              : Return the number of systimer tick 
+//* Input Parameters    :
+//* Output Parameters   :
+//*--------------------------------------------------------------------------------------
+unsigned int GetTickCount(void)
+{
+	return StTick;
+}
+
+#ifdef XMODEM
+//*--------------------------------------------------------------------------------------
+//* Function Name       : AT91_XmodemComplete()
+//* Object              : Perform the remap and jump to appli in RAM
+//* Input Parameters    :
+//* Output Parameters   :
+//*--------------------------------------------------------------------------------------
+static void AT91_XmodemComplete(AT91S_PipeStatus status, void *pVoid)
+{
+	/* stop the Xmodem tempo */
+	svcXmodem.tempo.Stop(&(svcXmodem.tempo));
+	XmodemComplete = 1;
+}
+
+
+//*--------------------------------------------------------------------------------------
+//* Function Name       : AT91F_XmodemProtocol(AT91S_PipeStatus status, void *pVoid)
+//* Object              : Xmodem dispatcher
+//* Input Parameters    :
+//* Output Parameters   :
+//*--------------------------------------------------------------------------------------
+static void XmodemProtocol(AT91S_PipeStatus status, void *pVoid)
+{
+	AT91PS_SBuffer pSBuffer = (AT91PS_SBuffer) xmodemPipe.pBuffer->pChild;
+	AT91PS_USART   pUsart     = svcXmodem.pUsart;
+			
+	if (pSBuffer->szRdBuffer == 0) {
+		/* Start a tempo to wait the Xmodem protocol complete */
+		svcXmodem.tempo.Start(&(svcXmodem.tempo), 10, 0, AT91_XmodemComplete, pUsart);								
+	}
+}
+#endif
+
+//*--------------------------------------------------------------------------------------
+//* Function Name       : irq1_c_handler()
+//* Object              : C Interrupt handler for Interrutp source 1
+//* Input Parameters    : none
+//* Output Parameters   : none
+//*--------------------------------------------------------------------------------------
+void AT91F_ST_HANDLER(void)
+{
+	volatile unsigned int csr = *AT91C_DBGU_CSR;
+#ifdef XMODEM
+	unsigned int error;
+#endif
+	
+	if (AT91C_BASE_ST->ST_SR & 0x01) {
+		StTick++;
+		ctlTempo.CtlTempoTick(&ctlTempo);
+		return;
+	}
+
+#ifdef XMODEM
+	error = AT91F_US_Error((AT91PS_USART)AT91C_BASE_DBGU);
+	if (csr & error) {
+		/* Stop previous Xmodem transmition*/
+		*(AT91C_DBGU_CR) = AT91C_US_RSTSTA;
+		AT91F_US_DisableIt((AT91PS_USART)AT91C_BASE_DBGU, AT91C_US_ENDRX);
+		AT91F_US_EnableIt((AT91PS_USART)AT91C_BASE_DBGU, AT91C_US_RXRDY);
+
+	}
+	
+	else if (csr & (AT91C_US_TXRDY | AT91C_US_ENDTX | AT91C_US_TXEMPTY | 
+	                AT91C_US_RXRDY | AT91C_US_ENDRX | AT91C_US_TIMEOUT | 
+	                AT91C_US_RXBUFF)) {
+		if ( !(svcXmodem.eot) )
+			svcXmodem.Handler(&svcXmodem, csr);
+	}
+#endif
+}
+
+
+//*-----------------------------------------------------------------------------
+//* Function Name       : AT91F_DisplayMenu()
+//* Object              : 
+//* Input Parameters    : 
+//* Return value		: 
+//*-----------------------------------------------------------------------------
+static int AT91F_DisplayMenu(void)
+{
+	int i, mci_present = 0;
+	printf("\nDF LOADER %s %s %s\n",AT91C_VERSION,__DATE__,__TIME__);
+	AT91F_DataflashPrintInfo();
+	mci_present = AT91F_MCI_Init();
+	for(i = 0; i < MAXMENU; i++) {
+		puts(menu_dataflash[i]);
+	}
+	return mci_present;
+}	
+
+
+//*-----------------------------------------------------------------------------
+//* Function Name       : AsciiToHex()
+//* Object              : ascii to hexa conversion
+//* Input Parameters    : 
+//* Return value		: 
+//*-----------------------------------------------------------------------------
+static unsigned int AsciiToHex(char *s, unsigned int *val)
+{
+	int n;
+
+	*val=0;
+	
+	if(s[0] == '0' && ((s[1] == 'x') || (s[1] == 'X')))
+		s+=2;
+	n = 0;	
+	while((n < 8) && (s[n] !=0))
+	{
+		*val <<= 4;
+		if ( (s[n] >= '0') && (s[n] <='9'))
+			*val += (s[n] - '0');
+		else	
+			if ((s[n] >= 'a') && (s[n] <='f'))
+				*val += (s[n] - 0x57);
+			else
+				if ((s[n] >= 'A') && (s[n] <='F'))
+					*val += (s[n] - 0x37);
+			else
+				return 0;
+		n++;
+	}
+
+	return 1;				
+}
+
+
+#ifdef MEMDISP
+//*-----------------------------------------------------------------------------
+//* Function Name       : AT91F_MemoryDisplay()
+//* Object              : Display the content of the dataflash
+//* Input Parameters    : 
+//* Return value		: 
+//*-----------------------------------------------------------------------------
+static int AT91F_MemoryDisplay(unsigned int addr, unsigned int length)
+{
+	unsigned long	i, nbytes, linebytes;
+	char	*cp;
+//	unsigned int 	*uip;
+//	unsigned short 	*usp;
+	unsigned char 	*ucp;
+	char linebuf[DISP_LINE_LEN];
+
+//	nbytes = length * size;
+	nbytes = length;
+   	do
+   	{
+//   		uip = (unsigned int *)linebuf;
+//   		usp = (unsigned short *)linebuf;
+		ucp = (unsigned char *)linebuf;
+		
+		printf("%08x:", addr);
+		linebytes = (nbytes > DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
+                if((addr & 0xF0000000) == 0x20000000) {
+			for(i = 0; i < linebytes; i ++) {
+				linebuf[i] =  *(char *)(addr+i);
+			}
+		} else {
+			read_dataflash(addr, linebytes, linebuf);
+		}
+		for (i=0; i<linebytes; i++)
+		{
+/*			if (size == 4) 
+				printf(" %08x", *uip++);
+			else if (size == 2)
+				printf(" %04x", *usp++);
+			else
+*/
+				printf(" %02x", *ucp++);
+//			addr += size;
+			addr++;
+		}
+		printf("    ");
+		cp = linebuf;
+		for (i=0; i<linebytes; i++) {
+			if ((*cp < 0x20) || (*cp > 0x7e))
+				printf(".");
+			else
+				printf("%c", *cp);
+			cp++;
+		}
+		printf("\n");
+		nbytes -= linebytes;
+	} while (nbytes > 0);
+	return 0;
+}
+#endif
+
+//*--------------------------------------------------------------------------------------
+//* Function Name       : AT91F_SetPLL
+//* Object              : Set the PLLA to 180Mhz and Master clock to 60 Mhz
+//* Input Parameters    :
+//* Output Parameters   :
+//*--------------------------------------------------------------------------------------
+static unsigned int AT91F_SetPLL(void)
+{
+	AT91_REG tmp;
+	AT91PS_PMC pPmc = AT91C_BASE_PMC;
+	AT91PS_CKGR pCkgr = AT91C_BASE_CKGR;
+
+	pPmc->PMC_IDR = 0xFFFFFFFF;
+
+	/* -Setup the PLL A */
+	pCkgr->CKGR_PLLAR = AT91C_PLLA_VALUE;
+
+	while (!(*AT91C_PMC_SR & AT91C_PMC_LOCKA));
+	
+	/* - Switch Master Clock from PLLB to PLLA/3 */
+	tmp = pPmc->PMC_MCKR;
+	/* See Atmel Errata #27 and #28 */
+	if (tmp & 0x0000001C) {
+		tmp = (tmp & ~0x0000001C);
+		pPmc->PMC_MCKR = tmp;
+		while (!(*AT91C_PMC_SR & AT91C_PMC_MCKRDY));
+	}
+	if (tmp != 0x00000202) {
+		pPmc->PMC_MCKR = 0x00000202;
+		if ((tmp & 0x00000003) != 0x00000002)
+			while (!(*AT91C_PMC_SR & AT91C_PMC_MCKRDY));
+	}
+
+	return 1;	
+}
+
+
+//*--------------------------------------------------------------------------------------
+//* Function Name       : AT91F_ResetRegisters
+//* Object              : Restore the initial state to registers
+//* Input Parameters    :
+//* Output Parameters   :
+//*--------------------------------------------------------------------------------------
+static unsigned int AT91F_ResetRegisters(void)
+{
+	volatile int i = 0;
+
+	/* set the PIOs in input*/
+	/* This disables the UART output, so dont execute for now*/
+
+#ifndef	DEBUGOUT
+	*AT91C_PIOA_ODR = 0xFFFFFFFF;	/* Disables all the output pins */
+	*AT91C_PIOA_PER = 0xFFFFFFFF;	/* Enables the PIO to control all the pins */
+#endif
+
+	AT91F_AIC_DisableIt (AT91C_BASE_AIC, AT91C_ID_SYS);
+	/* close all peripheral clocks */
+
+#ifndef	DEBUGOUT
+	AT91C_BASE_PMC->PMC_PCDR = 0xFFFFFFFC;
+#endif
+	/* Disable core interrupts and set supervisor mode */
+	__asm__ ("msr CPSR_c, #0xDF"); //* ARM_MODE_SYS(0x1F) | I_BIT(0x80) | F_BIT(0x40)
+	/* Clear all the interrupts */
+	*AT91C_AIC_ICCR = 0xffffffff;
+
+	/* read the AIC_IVR and AIC_FVR */
+	i = *AT91C_AIC_IVR;
+	i = *AT91C_AIC_FVR;
+
+	/* write the end of interrupt control register */
+	*AT91C_AIC_EOICR	= 0;
+
+	return 1;
+}
+
+
+static int AT91F_LoadBoot(void)
+{
+//	volatile unsigned int crc1 = 0, crc2 = 0;
+	volatile unsigned int SizeToDownload = 0x21400;
+	volatile unsigned int AddressToDownload = AT91C_BOOT_ADDR;
+
+#if 0
+	/* Read vector 6 to extract size to load */	
+	if (read_dataflash(AT91C_BOOT_DATAFLASH_ADDR, 32,
+	                   (char *)AddressToDownload) != AT91C_DATAFLASH_OK)
+	{
+		printf("Bad Code Size\n");
+		return IMAGE_BAD_SIZE;
+	}
+	/* calculate the size to download */
+	SizeToDownload = *(int *)(AddressToDownload + AT91C_OFFSET_VECT6);
+#endif
+	
+//	printf("\nLoad UBOOT from dataflash[%x] to SDRAM[%x]\n",
+//	       AT91C_BOOT_DATAFLASH_ADDR, AT91C_BOOT_ADDR);
+	if (read_dataflash(AT91C_BOOT_DATAFLASH_ADDR, SizeToDownload + 8,
+	                   (char *)AddressToDownload) != AT91C_DATAFLASH_OK)
+	{
+		printf("F DF RD\n");
+		return IMAGE_READ_FAILURE;
+	}
+#if 0
+	pAT91->CRC32((const unsigned char *)AT91C_BOOT_ADDR,
+	             (unsigned int)SizeToDownload , (unsigned int *)&crc2);
+	crc1 = (int)(*(char *)(AddressToDownload + SizeToDownload)) +
+	       (int)(*(char *)(AddressToDownload + SizeToDownload + 1) << 8) +
+	       (int)(*(char *)(AddressToDownload + SizeToDownload + 2) << 16) +
+	       (int)(*(char *)(AddressToDownload + SizeToDownload + 3) << 24);
+
+	/* Restore the value of Vector 6 */
+	*(int *)(AddressToDownload + AT91C_OFFSET_VECT6) =
+		*(int *)(AddressToDownload + SizeToDownload + 4);
+	
+	if (crc1 != crc2) {
+		printf("DF CRC bad %x != %x\n",crc1,crc2);
+	 	return	IMAGE_CRC_ERROR;
+	}
+#endif
+	return SUCCESS;
+}
+
+static int AT91F_StartBoot(void)
+{
+	int	sts;
+	if((sts = AT91F_LoadBoot()) != SUCCESS) return sts;
+//	printf("\n");
+//	printf("PLLA[180MHz], MCK[60Mhz] ==> Start UBOOT\n");
+	if (AT91F_ResetRegisters())
+	{
+		printf("Jump");
+		Jump(AT91C_BOOT_ADDR);
+//		LED_blink(0);
+	}
+	return	IMAGE_ERROR;
+}
+
+#if 0
+static void	AT91F_RepeatedStartBoot(void)
+{
+	int	i;
+	for(i = 0; i < CRC_RETRIES; i++) {
+		if(AT91F_StartBoot() != IMAGE_CRC_ERROR){
+//			LED_blink(1);
+			return;
+		}
+	}
+	return;
+}
+#endif
+
+#define TRUE 1
+#define FALSE 0
+#define TRX_MAGIC 0x30524448  /* "HDR0" */
+#define TRX_VERSION 1
+
+struct trx_header {
+	unsigned int magic;
+	unsigned int len;
+	unsigned int crc32;
+	unsigned int flag_version;
+	unsigned int offsets[3];
+};
+
+#define AT91C_MCI_TIMEOUT 1000000
+
+extern AT91S_MciDevice MCI_Device;
+extern void AT91F_MCIDeviceWaitReady(unsigned int);
+extern int AT91F_MCI_ReadBlockSwab(AT91PS_MciDevice, int, unsigned int *, int);
+
+int Program_From_MCI(void)
+{
+  int i;
+  unsigned int Max_Read_DataBlock_Length;
+  int block = 0;
+  int buffer = AT91C_DOWNLOAD_BASE_ADDRESS;
+  int bufpos = AT91C_DOWNLOAD_BASE_ADDRESS;
+  int NbPage = 0;
+  struct trx_header *p;
+
+	p = (struct trx_header *)bufpos;
+
+	Max_Read_DataBlock_Length = MCI_Device.pMCI_DeviceFeatures->Max_Read_DataBlock_Length;
+
+	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
+
+  AT91F_MCI_ReadBlockSwab(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length);
+
+  if (p->magic != TRX_MAGIC) {
+		printf("Inv IMG 0x%08x\n", p->magic);
+		return FALSE;
+		}
+
+	printf("RDSD");
+	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15 | AT91C_PIO_PC8 | AT91C_PIO_PC14;
+	for (i=0; i<(p->len/512); i++) {
+		AT91F_MCI_ReadBlockSwab(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length);
+		block++;
+		bufpos += Max_Read_DataBlock_Length;
+		}
+
+	NbPage = 0;
+	i = dataflash_info[0].Device.pages_number;
+	while(i >>= 1)
+		NbPage++;
+	i = ((p->offsets[1] - p->offsets[0])/ 512) + 1 + (NbPage << 13) + (dataflash_info[0].Device.pages_size << 17);
+	*(int *)(buffer + p->offsets[0] + AT91C_OFFSET_VECT6) = i;
+
+	printf(" WDFB");
+	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15 | AT91C_PIO_PC14;
+	AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC8;
+	write_dataflash(0xc0000000, buffer + p->offsets[0], p->offsets[1] - p->offsets[0]);
+	printf(" WUB");
+	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15;
+	AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC8 | AT91C_PIO_PC14;
+	write_dataflash(0xc0008000, buffer + p->offsets[1], p->offsets[2] - p->offsets[1]);
+	printf(" WKRFS");
+	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC8 | AT91C_PIO_PC15;
+	AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC7 | AT91C_PIO_PC14;
+	write_dataflash(0xc0042000, buffer + p->offsets[2], p->len - p->offsets[2]);
+	AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC8 | AT91C_PIO_PC14;
+	AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC7 | AT91C_PIO_PC15;
+	return TRUE;
+}
+
+//*----------------------------------------------------------------------------
+//* Function Name       : main
+//* Object              : Main function
+//* Input Parameters    : none
+//* Output Parameters   : True
+//*----------------------------------------------------------------------------
+int main(void)
+{
+#ifdef XMODEM
+	AT91PS_Buffer  		pXmBuffer;
+	AT91PS_SvcComm 		pSvcXmodem;
+#endif
+	AT91S_SvcTempo 		svcBootTempo; 	 // Link to a AT91S_Tempo object
+	unsigned int		ix;
+	volatile unsigned int AddressToDownload, SizeToDownload;	
+ 	unsigned int DeviceAddress = 0;
+	char command = 0;
+#ifdef XMODEM
+	volatile int i = 0;	
+	unsigned int crc1 = 0, crc2 = 0;
+	volatile int device;
+	int NbPage;
+#endif
+	volatile int Nb_Device = 0;
+	int mci_present = 0;
+
+	pAT91 = AT91C_ROM_BOOT_ADDRESS;
+
+	if (!AT91F_SetPLL())
+	{
+		printf("F SetPLL");
+		while(1);
+	}
+
+	at91_init_uarts();
+
+	/* Tempo Initialisation */
+	pAT91->OpenCtlTempo(&ctlTempo, (void *) &(pAT91->SYSTIMER_DESC));
+	ctlTempo.CtlTempoStart((void *) &(pAT91->SYSTIMER_DESC));
+	
+	// Attach the tempo to a tempo controler
+	ctlTempo.CtlTempoCreate(&ctlTempo, &svcBootTempo);
+//	LED_init();
+//	LED_blink(2);
+
+#ifdef XMODEM
+	/* Xmodem Initialisation */
+	pXmBuffer = pAT91->OpenSBuffer(&sXmBuffer);
+	pSvcXmodem = pAT91->OpenSvcXmodem(&svcXmodem,
+	             (AT91PS_USART)AT91C_BASE_DBGU, &ctlTempo);
+	pAT91->OpenPipe(&xmodemPipe, pSvcXmodem, pXmBuffer);
+#endif
+
+	/* System Timer initialization */
+	AT91F_AIC_ConfigureIt(
+		AT91C_BASE_AIC,                        // AIC base address
+		AT91C_ID_SYS,                          // System peripheral ID
+		AT91C_AIC_PRIOR_HIGHEST,               // Max priority
+		AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, // Level sensitive
+		AT91F_ST_ASM_HANDLER
+	);
+	/* Enable ST interrupt */
+	AT91F_AIC_EnableIt(AT91C_BASE_AIC, AT91C_ID_SYS);
+
+#ifndef PRODTEST
+	/* Start tempo to start Boot in a delay of
+	 * AT91C_DELAY_TO_BOOT sec if no key pressed */
+	svcBootTempo.Start(&svcBootTempo, AT91C_DELAY_TO_BOOT,
+	                   0, AT91F_StartBoot, NULL);
+#endif
+
+	while(1)
+	{
+		while(command == 0)
+		{
+			AddressToDownload = AT91C_DOWNLOAD_BASE_ADDRESS;
+			SizeToDownload = AT91C_DOWNLOAD_MAX_SIZE;
+			DeviceAddress = 0;
+			
+			/* try to detect Dataflash */
+			if (!Nb_Device)
+				Nb_Device = AT91F_DataflashInit();				
+							
+			mci_present = AT91F_DisplayMenu();
+
+#ifdef PRODTEST
+			if (mci_present) {
+				if (Program_From_MCI())
+					AT91F_StartBoot();
+			}
+#endif
+
+			message[0] = 0;
+			AT91F_ReadLine ("Enter: ", message);
+
+#ifndef PRODTEST
+			/* stop tempo ==> stop autoboot */
+			svcBootTempo.Stop(&svcBootTempo);
+#endif
+
+			command = message[0];
+			for(ix = 1; (message[ix] == ' ') && (ix < 12); ix++);	// Skip some whitespace
+				
+			if(!AsciiToHex(&message[ix], &DeviceAddress) )
+				DeviceAddress = 0;			// Illegal DeviceAddress
+				
+			switch(command)
+			{
+#ifdef XMODEM
+				case '1':
+				case '2':
+				case '5':
+					if(command == '1') {
+						DeviceAddress = 0xC0000000;
+//						printf("Download DataflashBoot.bin to [0x%x]\n", DeviceAddress);
+					} else if(command == '2') {
+						DeviceAddress = AT91C_BOOT_DATAFLASH_ADDR;
+//						printf("Download u-boot.bin to [0x%x]\n", DeviceAddress);
+					} else {
+//						printf("Download Dataflash to [0x%x]\n", DeviceAddress);
+					}
+					switch(DeviceAddress & 0xFF000000)
+					{
+						case CFG_DATAFLASH_LOGIC_ADDR_CS0:
+							if (dataflash_info[0].id == 0){
+								printf("No DF");
+								AT91F_WaitKeyPressed();
+								command = 0;
+							}
+
+							device = 0;
+						break;
+					
+						case CFG_DATAFLASH_LOGIC_ADDR_CS3:
+							if (dataflash_info[1].id == 0){
+								printf("No DF");
+								AT91F_WaitKeyPressed();
+								command = 0;
+							}
+							device = 1;
+						break;
+					
+						default:
+							command = 0;
+						break;
+					}
+				break;
+#endif
+
+				case '3':
+					if (mci_present)
+						Program_From_MCI();
+					command = 0;
+					break;
+
+				case '4':
+					AT91F_StartBoot();
+					command = 0;
+				break;
+
+#ifdef MEMDISP
+				case '6':
+					do 
+					{
+						AT91F_MemoryDisplay(DeviceAddress, 256);
+						AT91F_ReadLine (NULL, message);
+						DeviceAddress += 0x100;
+					}
+					while(message[0] == '\0');
+					command = 0;
+				break;
+#endif
+
+				case '7':
+					switch(DeviceAddress & 0xFF000000)
+					{
+						case CFG_DATAFLASH_LOGIC_ADDR_CS0:
+							break;
+						case CFG_DATAFLASH_LOGIC_ADDR_CS3:
+							break;
+						default:
+							command = 0;
+							break;
+					}
+
+					if (command != 0) {
+						AT91F_ReadLine ("RDY ERA\nSure?",
+								message);
+						if(message[0] == 'Y' || message[0] == 'y') {
+							erase_dataflash(DeviceAddress & 0xFF000000);
+//							printf("Erase complete\n\n");
+						}
+//						else
+//							printf("Erase aborted\n");
+					}
+					command = 0;
+
+				break;
+
+				default:
+					command = 0;
+				break;
+			}
+		}
+#ifdef XMODEM
+		for(i = 0; i <= AT91C_DOWNLOAD_MAX_SIZE; i++)
+			*(unsigned char *)(AddressToDownload + i) = 0;
+	
+		xmodemPipe.Read(&xmodemPipe, (char *)AddressToDownload,
+		                SizeToDownload, XmodemProtocol, 0);	
+		while(XmodemComplete !=1);
+		SizeToDownload = (unsigned int)((svcXmodem.pData) -
+		                 (unsigned int)AddressToDownload);
+
+		/* Modification of vector 6 */
+		if ((DeviceAddress == CFG_DATAFLASH_LOGIC_ADDR_CS0)) {
+			// Vector 6 must be compliant to the BootRom description (ref Datasheet)
+	   		NbPage = 0;
+	    	i = dataflash_info[device].Device.pages_number;
+	    	while(i >>= 1)
+	    		NbPage++;
+			i = (SizeToDownload / 512)+1 + (NbPage << 13) +
+			    (dataflash_info[device].Device.pages_size << 17); //+4 to add crc32
+		    SizeToDownload = 512 * (i &0xFF);
+		}	
+		else
+		{
+			/* Save the contents of vector 6 ==> will be restored 
+			 * at boot time (AT91F_StartBoot) */
+			*(int *)(AddressToDownload + SizeToDownload + 4) =
+				*(int *)(AddressToDownload + AT91C_OFFSET_VECT6);
+			/* Modify Vector 6 to contain the size of the
+			 * file to copy (Dataflash -> SDRAM)*/
+			i = SizeToDownload;	
+		}		
+
+		*(int *)(AddressToDownload + AT91C_OFFSET_VECT6) = i;
+//		printf("\nModification of Arm Vector 6 :%x\n", i);
+			    
+//		printf("\nWrite %d bytes in DataFlash [0x%x]\n",SizeToDownload, DeviceAddress);
+		crc1 = 0;
+		pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc1);
+
+		/* Add the crc32 at the end of the code */
+		*(char *)(AddressToDownload + SizeToDownload)     = (char)(crc1 & 0x000000FF);
+		*(char *)(AddressToDownload + SizeToDownload + 1) = (char)((crc1 & 0x0000FF00) >> 8);
+		*(char *)(AddressToDownload + SizeToDownload + 2) = (char)((crc1 & 0x00FF0000) >> 16);
+		*(char *)(AddressToDownload + SizeToDownload + 3) = (char)((crc1 & 0xFF000000) >> 24);
+
+		/* write dataflash */
+		write_dataflash (DeviceAddress, AddressToDownload, (SizeToDownload + 8));
+
+		/* clear the buffer before read */
+		for(i=0; i <= SizeToDownload; i++)
+			*(unsigned char *)(AddressToDownload + i) = 0;
+					
+		/* Read dataflash to check the validity of the data */
+		read_dataflash (DeviceAddress, (SizeToDownload + 4), (char *)(AddressToDownload));
+
+		printf("VFY: ");	
+		crc2 = 0;
+				
+		pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc2);
+ 		crc1 = (int)(*(char *)(AddressToDownload + SizeToDownload))          +
+			   (int)(*(char *)(AddressToDownload + SizeToDownload + 1) << 8) +
+			   (int)(*(char *)(AddressToDownload + SizeToDownload + 2) << 16) +
+			   (int)(*(char *)(AddressToDownload + SizeToDownload + 3) << 24);
+
+		if (crc1 != crc2)
+		 	printf("ERR");
+		else
+		 	printf("OK");
+		 	
+ 		command = 0;
+ 		XmodemComplete = 0;
+		AT91F_WaitKeyPressed();
+#endif
+ 	}
+}
+
diff --git a/target/linux/at91/image/dfboot/src/main.h b/target/linux/at91/image/dfboot/src/main.h
new file mode 100644
index 0000000..a8cd325
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/main.h
@@ -0,0 +1,43 @@
+//*----------------------------------------------------------------------------
+//*      ATMEL Microcontroller Software Support  -  ROUSSET  -
+//*----------------------------------------------------------------------------
+//* The software is delivered "AS IS" without warranty or condition of any
+//* kind, either express, implied or statutory. This includes without
+//* limitation any warranty or condition with respect to merchantability or
+//* fitness for any particular purpose, or against the infringements of
+//* intellectual property rights of others.
+//*----------------------------------------------------------------------------
+//* File Name           : main.h
+//* Object              :
+//*
+//* 1.0 27/03/03 HIi    : Creation
+//* 1.01 03/05/04 HIi   : AT9C_VERSION incremented to 1.01
+//* 1.02 15/06/04 HIi   : AT9C_VERSION incremented to 1.02 ==> 
+//*                       Add crc32 to verify dataflash download
+//* 1.03 18/04/05 MLC   : AT91C_VERSION incremented to 1.03g
+//*			  Repeat boot on CRC Failure
+//*			  Change Page Size to 1056
+//*			  Reduce SPI speed to 4 Mbit
+//*			  Change U-Boot boot address to a 1056 byte page boundary
+//* 1.04 30/04/05 USA	: AT91C_VERSION incremented to 1.04
+//* 1.05 07/08/06 USA	: AT91C_VERSION incremented to 1.05
+//*			  Will only support loading Dataflashboot.bin and U-Boot
+//*----------------------------------------------------------------------------
+
+#ifndef main_h
+#define main_h
+
+#include    "embedded_services.h"
+
+#define AT91C_DOWNLOAD_BASE_ADDRESS     0x20000000
+#define AT91C_DOWNLOAD_MAX_SIZE         0x00040000
+
+#define AT91C_OFFSET_VECT6              0x14        //* Offset for ARM vector 6
+
+#define AT91C_VERSION   "VER 1.05"
+
+
+// Global variables and functions definition
+extern unsigned int GetTickCount(void);
+#endif
+
diff --git a/target/linux/at91/image/dfboot/src/mci_device.c b/target/linux/at91/image/dfboot/src/mci_device.c
new file mode 100644
index 0000000..cce74a3
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/mci_device.c
@@ -0,0 +1,743 @@
+//*----------------------------------------------------------------------------
+//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
+//*----------------------------------------------------------------------------
+//* The software is delivered "AS IS" without warranty or condition of any
+//* kind, either express, implied or statutory. This includes without
+//* limitation any warranty or condition with respect to merchantability or
+//* fitness for any particular purpose, or against the infringements of
+//* intellectual property rights of others.
+//*----------------------------------------------------------------------------
+//* File Name           : mci_device.c
+//* Object              : TEST DataFlash Functions
+//* Creation            : FB   26/11/2002
+//*
+//*----------------------------------------------------------------------------
+
+#include <AT91C_MCI_Device.h>
+#include "stdio.h"
+
+#define AT91C_MCI_TIMEOUT			1000000   /* For AT91F_MCIDeviceWaitReady */
+#define BUFFER_SIZE_MCI_DEVICE		512
+#define MASTER_CLOCK				60000000
+#define FALSE						0
+#define TRUE						1
+
+//* External Functions
+extern void AT91F_ASM_MCI_Handler(void);
+//* Global Variables
+AT91S_MciDeviceFeatures			MCI_Device_Features;
+AT91S_MciDeviceDesc				MCI_Device_Desc;
+AT91S_MciDevice					MCI_Device;
+
+#undef ENABLE_WRITE
+#undef MMC
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_SendCommand
+//* \brief Generic function to send a command to the MMC or SDCard
+//*----------------------------------------------------------------------------
+int AT91F_MCI_SendCommand (
+	AT91PS_MciDevice pMCI_Device,
+	unsigned int Cmd,
+	unsigned int Arg)
+{
+	unsigned int	error,status;
+	//unsigned int	tick=0;
+
+    // Send the command
+    AT91C_BASE_MCI->MCI_ARGR = Arg;
+    AT91C_BASE_MCI->MCI_CMDR = Cmd;
+
+	// wait for CMDRDY Status flag to read the response
+	do
+	{
+		status = AT91C_BASE_MCI->MCI_SR;
+		//tick++;
+	}
+	while( !(status & AT91C_MCI_CMDRDY) );//&& (tick<100) );
+
+    // Test error  ==> if crc error and response R3 ==> don't check error
+    error = (AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR;
+	if(error != 0 )
+	{
+		// if the command is SEND_OP_COND the CRC error flag is always present (cf : R3 response)
+		if ( (Cmd != AT91C_SDCARD_APP_OP_COND_CMD) && (Cmd != AT91C_MMC_SEND_OP_COND_CMD) )
+			return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR);
+		else
+		{
+			if (error != AT91C_MCI_RCRCE)
+				return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR);
+		}
+	}
+    return AT91C_CMD_SEND_OK;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_SDCard_SendAppCommand
+//* \brief Specific function to send a specific command to the SDCard
+//*----------------------------------------------------------------------------
+int AT91F_MCI_SDCard_SendAppCommand (
+	AT91PS_MciDevice pMCI_Device,
+	unsigned int Cmd_App,
+	unsigned int Arg	)
+{
+	unsigned int status;
+	//unsigned int	tick=0;
+
+	// Send the CMD55 for application specific command
+    AT91C_BASE_MCI->MCI_ARGR = (pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address << 16 );
+    AT91C_BASE_MCI->MCI_CMDR = AT91C_APP_CMD;
+
+	// wait for CMDRDY Status flag to read the response
+	do
+	{
+		status = AT91C_BASE_MCI->MCI_SR;
+		//tick++;
+	}
+	while( !(status & AT91C_MCI_CMDRDY) );//&& (tick<100) );	
+
+    // if an error occurs
+    if (((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR) != 0 )
+		return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR);
+
+    // check if it is a specific command and then send the command
+	if ( (Cmd_App && AT91C_SDCARD_APP_ALL_CMD) == 0)
+		return AT91C_CMD_SEND_ERROR;
+
+   return( AT91F_MCI_SendCommand(pMCI_Device,Cmd_App,Arg) );
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_GetStatus
+//* \brief Addressed card sends its status register
+//*----------------------------------------------------------------------------
+int AT91F_MCI_GetStatus(AT91PS_MciDevice pMCI_Device,unsigned int relative_card_address)
+{
+	if (AT91F_MCI_SendCommand(pMCI_Device,
+								AT91C_SEND_STATUS_CMD,
+								relative_card_address <<16) == AT91C_CMD_SEND_OK)
+    	return (AT91C_BASE_MCI->MCI_RSPR[0]);
+
+    return AT91C_CMD_SEND_ERROR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_Device_Handler
+//* \brief MCI C interrupt handler
+//*----------------------------------------------------------------------------
+void AT91F_MCI_Device_Handler(
+	AT91PS_MciDevice pMCI_Device,
+	unsigned int status)
+{
+	// If End of Tx Buffer Empty interrupt occurred
+	if ( status & AT91C_MCI_TXBUFE )
+    {
+		AT91C_BASE_MCI->MCI_IDR = AT91C_MCI_TXBUFE;
+ 		AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_TXTDIS;
+        	
+		pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_IDLE;
+	}	// End of if AT91C_MCI_TXBUFF		
+	
+    // If End of Rx Buffer Full interrupt occurred
+    if ( status & AT91C_MCI_RXBUFF )
+    {        
+       	AT91C_BASE_MCI->MCI_IDR = AT91C_MCI_RXBUFF;
+ 		AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_RXTDIS;
+	
+		pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_IDLE;
+	}	// End of if AT91C_MCI_RXBUFF
+
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_Handler
+//* \brief MCI Handler
+//*----------------------------------------------------------------------------
+void AT91F_MCI_Handler(void)
+{
+	int status;
+
+	status = ( AT91C_BASE_MCI->MCI_SR & AT91C_BASE_MCI->MCI_IMR );
+
+	AT91F_MCI_Device_Handler(&MCI_Device,status);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_ReadBlock
+//* \brief Read an ENTIRE block or PARTIAL block
+//*----------------------------------------------------------------------------
+int AT91F_MCI_ReadBlock(
+	AT91PS_MciDevice pMCI_Device,
+	int src,
+	unsigned int *dataBuffer,
+	int sizeToRead )
+{
+    ////////////////////////////////////////////////////////////////////////////////////////////
+    if(pMCI_Device->pMCI_DeviceDesc->state != AT91C_MCI_IDLE)
+    	return AT91C_READ_ERROR;
+    
+    if( (AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address) & AT91C_SR_READY_FOR_DATA) != AT91C_SR_READY_FOR_DATA)
+    	return AT91C_READ_ERROR;
+    	
+    if ( (src + sizeToRead) > pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity )
+		return AT91C_READ_ERROR;
+
+    // If source does not fit a begin of a block
+	if ( (src % pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) != 0 )
+		return AT91C_READ_ERROR;
+   
+     // Test if the MMC supports Partial Read Block
+     // ALWAYS SUPPORTED IN SD Memory Card
+     if( (sizeToRead < pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) 
+    	&& (pMCI_Device->pMCI_DeviceFeatures->Read_Partial == 0x00) )
+   		return AT91C_READ_ERROR;
+   		
+    if( sizeToRead > pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length)
+   		return AT91C_READ_ERROR;
+    ////////////////////////////////////////////////////////////////////////////////////////////
+      
+    // Init Mode Register
+	AT91C_BASE_MCI->MCI_MR |= ((pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length << 16) | AT91C_MCI_PDCMODE);
+	 
+    if (sizeToRead %4)
+		sizeToRead = (sizeToRead /4)+1;
+	else
+		sizeToRead = sizeToRead/4;
+
+	AT91C_BASE_PDC_MCI->PDC_PTCR = (AT91C_PDC_TXTDIS | AT91C_PDC_RXTDIS);
+    AT91C_BASE_PDC_MCI->PDC_RPR  = (unsigned int)dataBuffer;
+    AT91C_BASE_PDC_MCI->PDC_RCR  = sizeToRead;
+
+	// Send the Read single block command
+    if ( AT91F_MCI_SendCommand(pMCI_Device, AT91C_READ_SINGLE_BLOCK_CMD, src) != AT91C_CMD_SEND_OK )
+    	return AT91C_READ_ERROR;
+
+	pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_RX_SINGLE_BLOCK;
+
+	// Enable AT91C_MCI_RXBUFF Interrupt
+    AT91C_BASE_MCI->MCI_IER = AT91C_MCI_RXBUFF;
+
+	// (PDC) Receiver Transfer Enable
+	AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_RXTEN;
+	
+	return AT91C_READ_OK;
+}
+
+
+#ifdef ENABLE_WRITE
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_WriteBlock
+//* \brief  Write an ENTIRE block but not always PARTIAL block !!!
+//*----------------------------------------------------------------------------
+int AT91F_MCI_WriteBlock(
+	AT91PS_MciDevice pMCI_Device,
+	int dest,
+	unsigned int *dataBuffer,
+	int sizeToWrite )
+{
+    ////////////////////////////////////////////////////////////////////////////////////////////
+	if( pMCI_Device->pMCI_DeviceDesc->state != AT91C_MCI_IDLE)
+    	return AT91C_WRITE_ERROR;
+    
+    if( (AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address) & AT91C_SR_READY_FOR_DATA) != AT91C_SR_READY_FOR_DATA)
+    	return AT91C_WRITE_ERROR;
+    	
+    if ( (dest + sizeToWrite) > pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity )
+		return AT91C_WRITE_ERROR;
+
+    // If source does not fit a begin of a block
+	if ( (dest % pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) != 0 )
+		return AT91C_WRITE_ERROR;
+   
+    // Test if the MMC supports Partial Write Block 
+    if( (sizeToWrite < pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length) 
+    	&& (pMCI_Device->pMCI_DeviceFeatures->Write_Partial == 0x00) )
+   		return AT91C_WRITE_ERROR;
+   		
+   	if( sizeToWrite > pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length )
+   		return AT91C_WRITE_ERROR;
+    ////////////////////////////////////////////////////////////////////////////////////////////
+  
+    // Init Mode Register
+	AT91C_BASE_MCI->MCI_MR |= ((pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length << 16) | AT91C_MCI_PDCMODE);
+	
+	if (sizeToWrite %4)
+		sizeToWrite = (sizeToWrite /4)+1;
+	else
+		sizeToWrite = sizeToWrite/4;
+
+	// Init PDC for write sequence
+    AT91C_BASE_PDC_MCI->PDC_PTCR = (AT91C_PDC_TXTDIS | AT91C_PDC_RXTDIS);
+    AT91C_BASE_PDC_MCI->PDC_TPR = (unsigned int) dataBuffer;
+    AT91C_BASE_PDC_MCI->PDC_TCR = sizeToWrite;
+
+	// Send the write single block command
+    if ( AT91F_MCI_SendCommand(pMCI_Device, AT91C_WRITE_BLOCK_CMD, dest) != AT91C_CMD_SEND_OK)
+    	return AT91C_WRITE_ERROR;
+
+	pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_TX_SINGLE_BLOCK;
+
+	// Enable AT91C_MCI_TXBUFE Interrupt
+    AT91C_BASE_MCI->MCI_IER = AT91C_MCI_TXBUFE;
+  
+  	// Enables TX for PDC transfert requests
+    AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_TXTEN;
+  
+	return AT91C_WRITE_OK;
+}
+#endif
+
+#ifdef MMC
+//*------------------------------------------------------------------------------------------------------------
+//* \fn    AT91F_MCI_MMC_SelectCard
+//* \brief Toggles a card between the Stand_by and Transfer states or between Programming and Disconnect states
+//*------------------------------------------------------------------------------------------------------------
+int AT91F_MCI_MMC_SelectCard(AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address)
+{
+    int status;
+	
+	//* Check if the MMC card chosen is already the selected one
+	status = AT91F_MCI_GetStatus(pMCI_Device,relative_card_address);
+
+	if (status < 0)
+		return AT91C_CARD_SELECTED_ERROR;
+
+	if ((status & AT91C_SR_CARD_SELECTED) == AT91C_SR_CARD_SELECTED)
+		return AT91C_CARD_SELECTED_OK;
+
+	//* Search for the MMC Card to be selected, status = the Corresponding Device Number
+	status = 0;
+	while( (pMCI_Device->pMCI_DeviceFeatures[status].Relative_Card_Address != relative_card_address)
+		   && (status < AT91C_MAX_MCI_CARDS) )
+		status++;
+
+	if (status > AT91C_MAX_MCI_CARDS)
+    	return AT91C_CARD_SELECTED_ERROR;
+
+    if (AT91F_MCI_SendCommand( pMCI_Device,
+    								   AT91C_SEL_DESEL_CARD_CMD,
+    								   pMCI_Device->pMCI_DeviceFeatures[status].Relative_Card_Address << 16) == AT91C_CMD_SEND_OK)
+    	return AT91C_CARD_SELECTED_OK;
+    return AT91C_CARD_SELECTED_ERROR;
+}
+#endif
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_GetCSD
+//* \brief Asks to the specified card to send its CSD
+//*----------------------------------------------------------------------------
+int AT91F_MCI_GetCSD (AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address , unsigned int * response)
+{
+ 	
+ 	if(AT91F_MCI_SendCommand(pMCI_Device,
+								  AT91C_SEND_CSD_CMD,
+								  (relative_card_address << 16)) != AT91C_CMD_SEND_OK)
+		return AT91C_CMD_SEND_ERROR;
+	
+    response[0] = AT91C_BASE_MCI->MCI_RSPR[0];
+   	response[1] = AT91C_BASE_MCI->MCI_RSPR[1];
+    response[2] = AT91C_BASE_MCI->MCI_RSPR[2];
+    response[3] = AT91C_BASE_MCI->MCI_RSPR[3];
+    
+    return AT91C_CMD_SEND_OK;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_SetBlocklength
+//* \brief Select a block length for all following block commands (R/W)
+//*----------------------------------------------------------------------------
+int AT91F_MCI_SetBlocklength(AT91PS_MciDevice pMCI_Device,unsigned int length)
+{
+    return( AT91F_MCI_SendCommand(pMCI_Device, AT91C_SET_BLOCKLEN_CMD, length) );
+}
+
+#ifdef MMC
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_MMC_GetAllOCR
+//* \brief Asks to all cards to send their operations conditions
+//*----------------------------------------------------------------------------
+int AT91F_MCI_MMC_GetAllOCR (AT91PS_MciDevice pMCI_Device)
+{
+	unsigned int	response =0x0;
+ 	
+ 	while(1)
+    {
+    	response = AT91F_MCI_SendCommand(pMCI_Device,
+  										AT91C_MMC_SEND_OP_COND_CMD,
+  										AT91C_MMC_HOST_VOLTAGE_RANGE);
+		if (response != AT91C_CMD_SEND_OK)
+			return AT91C_INIT_ERROR;
+		
+		response = AT91C_BASE_MCI->MCI_RSPR[0];
+		
+		if ( (response & AT91C_CARD_POWER_UP_BUSY) == AT91C_CARD_POWER_UP_BUSY)
+			return(response);	
+	}
+}
+#endif
+
+#ifdef MMC
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_MMC_GetAllCID
+//* \brief Asks to the MMC on the chosen slot to send its CID
+//*----------------------------------------------------------------------------
+int AT91F_MCI_MMC_GetAllCID (AT91PS_MciDevice pMCI_Device, unsigned int *response)
+{
+	int Nb_Cards_Found=-1;
+  
+	while(1)
+	{
+	 	if(AT91F_MCI_SendCommand(pMCI_Device,
+								AT91C_MMC_ALL_SEND_CID_CMD,
+								AT91C_NO_ARGUMENT) != AT91C_CMD_SEND_OK)
+			return Nb_Cards_Found;
+		else
+		{		
+			Nb_Cards_Found = 0;
+			//* Assignation of the relative address to the MMC CARD
+			pMCI_Device->pMCI_DeviceFeatures[Nb_Cards_Found].Relative_Card_Address = Nb_Cards_Found + AT91C_FIRST_RCA;
+			//* Set the insert flag
+			pMCI_Device->pMCI_DeviceFeatures[Nb_Cards_Found].Card_Inserted = AT91C_MMC_CARD_INSERTED;
+	
+			if (AT91F_MCI_SendCommand(pMCI_Device,
+									 AT91C_MMC_SET_RELATIVE_ADDR_CMD,
+									 (Nb_Cards_Found + AT91C_FIRST_RCA) << 16) != AT91C_CMD_SEND_OK)
+				return AT91C_CMD_SEND_ERROR;
+				 
+			//* If no error during assignation address ==> Increment Nb_cards_Found
+			Nb_Cards_Found++ ;
+		}
+	}
+}
+#endif
+#ifdef MMC
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_MMC_Init
+//* \brief Return the MMC initialisation status
+//*----------------------------------------------------------------------------
+int AT91F_MCI_MMC_Init (AT91PS_MciDevice pMCI_Device)
+{
+    unsigned int	tab_response[4];
+	unsigned int	mult,blocknr;
+	unsigned int 	i,Nb_Cards_Found=0;
+
+	//* Resets all MMC Cards in Idle state
+	AT91F_MCI_SendCommand(pMCI_Device, AT91C_MMC_GO_IDLE_STATE_CMD, AT91C_NO_ARGUMENT);
+
+    if(AT91F_MCI_MMC_GetAllOCR(pMCI_Device) == AT91C_INIT_ERROR)
+    	return AT91C_INIT_ERROR;
+
+	Nb_Cards_Found = AT91F_MCI_MMC_GetAllCID(pMCI_Device,tab_response);
+	if (Nb_Cards_Found != AT91C_CMD_SEND_ERROR)
+	{
+	    //* Set the Mode Register
+    	AT91C_BASE_MCI->MCI_MR = AT91C_MCI_MR_PDCMODE;
+
+		for(i = 0; i < Nb_Cards_Found; i++)
+		{
+			if (AT91F_MCI_GetCSD(pMCI_Device,
+									  pMCI_Device->pMCI_DeviceFeatures[i].Relative_Card_Address,
+									  tab_response) != AT91C_CMD_SEND_OK)
+				pMCI_Device->pMCI_DeviceFeatures[i].Relative_Card_Address = 0;					  
+			else
+			{
+				pMCI_Device->pMCI_DeviceFeatures[i].Max_Read_DataBlock_Length = 1 << ((tab_response[1] >> AT91C_CSD_RD_B_LEN_S) & AT91C_CSD_RD_B_LEN_M );
+	 			pMCI_Device->pMCI_DeviceFeatures[i].Max_Write_DataBlock_Length =	1 << ((tab_response[3] >> AT91C_CSD_WBLEN_S) & AT91C_CSD_WBLEN_M );
+				pMCI_Device->pMCI_DeviceFeatures[i].Sector_Size = 1 + ((tab_response[2] >> AT91C_CSD_v22_SECT_SIZE_S) & AT91C_CSD_v22_SECT_SIZE_M );
+		  		pMCI_Device->pMCI_DeviceFeatures[i].Read_Partial = (tab_response[1] >> AT91C_CSD_RD_B_PAR_S) & AT91C_CSD_RD_B_PAR_M;
+				pMCI_Device->pMCI_DeviceFeatures[i].Write_Partial = (tab_response[3] >> AT91C_CSD_WBLOCK_P_S) & AT91C_CSD_WBLOCK_P_M;
+				
+				// None in MMC specification version 2.2
+				pMCI_Device->pMCI_DeviceFeatures[i].Erase_Block_Enable = 0;
+				
+				pMCI_Device->pMCI_DeviceFeatures[i].Read_Block_Misalignment = (tab_response[1] >> AT91C_CSD_RD_B_MIS_S) & AT91C_CSD_RD_B_MIS_M;
+				pMCI_Device->pMCI_DeviceFeatures[i].Write_Block_Misalignment = (tab_response[1] >> AT91C_CSD_WR_B_MIS_S) & AT91C_CSD_WR_B_MIS_M;
+
+				//// Compute Memory Capacity
+				// compute MULT
+				mult = 1 << ( ((tab_response[2] >> AT91C_CSD_C_SIZE_M_S) & AT91C_CSD_C_SIZE_M_M) + 2 );
+				// compute MSB of C_SIZE
+				blocknr = ((tab_response[1] >> AT91C_CSD_CSIZE_H_S) & AT91C_CSD_CSIZE_H_M) << 2;
+				// compute MULT * (LSB of C-SIZE + MSB already computed + 1) = BLOCKNR
+				blocknr = mult * ( ( blocknr + ( (tab_response[2] >> AT91C_CSD_CSIZE_L_S) & AT91C_CSD_CSIZE_L_M) ) + 1 );
+
+				pMCI_Device->pMCI_DeviceFeatures[i].Memory_Capacity =  pMCI_Device->pMCI_DeviceFeatures[i].Max_Read_DataBlock_Length * blocknr;
+		  		//// End of Compute Memory Capacity
+		  		
+			}	// end of else			  
+		}	// end of for
+		
+		return AT91C_INIT_OK;
+	}	// end of if
+
+    return AT91C_INIT_ERROR;
+}
+#endif
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_SDCard_GetOCR
+//* \brief Asks to all cards to send their operations conditions
+//*----------------------------------------------------------------------------
+int AT91F_MCI_SDCard_GetOCR (AT91PS_MciDevice pMCI_Device)
+{
+	unsigned int	response =0x0;
+
+	// The RCA to be used for CMD55 in Idle state shall be the card's default RCA=0x0000.
+	pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address = 0x0;
+ 	
+ 	while( (response & AT91C_CARD_POWER_UP_BUSY) != AT91C_CARD_POWER_UP_BUSY )
+    {
+    	response = AT91F_MCI_SDCard_SendAppCommand(pMCI_Device,
+  										AT91C_SDCARD_APP_OP_COND_CMD,
+  										AT91C_MMC_HOST_VOLTAGE_RANGE);
+		if (response != AT91C_CMD_SEND_OK)
+			return AT91C_INIT_ERROR;
+		
+		response = AT91C_BASE_MCI->MCI_RSPR[0];
+	}
+	
+	return(AT91C_BASE_MCI->MCI_RSPR[0]);
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_SDCard_GetCID
+//* \brief Asks to the SDCard on the chosen slot to send its CID
+//*----------------------------------------------------------------------------
+int AT91F_MCI_SDCard_GetCID (AT91PS_MciDevice pMCI_Device, unsigned int *response)
+{
+ 	if(AT91F_MCI_SendCommand(pMCI_Device,
+							AT91C_ALL_SEND_CID_CMD,
+							AT91C_NO_ARGUMENT) != AT91C_CMD_SEND_OK)
+		return AT91C_CMD_SEND_ERROR;
+	
+    response[0] = AT91C_BASE_MCI->MCI_RSPR[0];
+   	response[1] = AT91C_BASE_MCI->MCI_RSPR[1];
+    response[2] = AT91C_BASE_MCI->MCI_RSPR[2];
+    response[3] = AT91C_BASE_MCI->MCI_RSPR[3];
+    
+    return AT91C_CMD_SEND_OK;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_SDCard_SetBusWidth
+//* \brief  Set bus width for SDCard
+//*----------------------------------------------------------------------------
+int AT91F_MCI_SDCard_SetBusWidth(AT91PS_MciDevice pMCI_Device)
+{
+	volatile int	ret_value;
+	char			bus_width;
+
+	do
+	{
+		ret_value =AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address);
+	}
+	while((ret_value > 0) && ((ret_value & AT91C_SR_READY_FOR_DATA) == 0));
+
+	// Select Card
+    AT91F_MCI_SendCommand(pMCI_Device,
+    						AT91C_SEL_DESEL_CARD_CMD,
+    						(pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address)<<16);
+
+	// Set bus width for Sdcard
+	if(pMCI_Device->pMCI_DeviceDesc->SDCard_bus_width == AT91C_MCI_SCDBUS)
+		 	bus_width = AT91C_BUS_WIDTH_4BITS;
+	else	bus_width = AT91C_BUS_WIDTH_1BIT;
+
+	if (AT91F_MCI_SDCard_SendAppCommand(pMCI_Device,AT91C_SDCARD_SET_BUS_WIDTH_CMD,bus_width) != AT91C_CMD_SEND_OK)
+		return AT91C_CMD_SEND_ERROR;
+
+	return AT91C_CMD_SEND_OK;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_SDCard_Init
+//* \brief Return the SDCard initialisation status
+//*----------------------------------------------------------------------------
+int AT91F_MCI_SDCard_Init (AT91PS_MciDevice pMCI_Device)
+{
+    unsigned int	tab_response[4];
+	unsigned int	mult,blocknr;
+
+	AT91F_MCI_SendCommand(pMCI_Device, AT91C_GO_IDLE_STATE_CMD, AT91C_NO_ARGUMENT);
+
+    if(AT91F_MCI_SDCard_GetOCR(pMCI_Device) == AT91C_INIT_ERROR)
+    	return AT91C_INIT_ERROR;
+
+	if (AT91F_MCI_SDCard_GetCID(pMCI_Device,tab_response) == AT91C_CMD_SEND_OK)
+	{
+	    pMCI_Device->pMCI_DeviceFeatures->Card_Inserted = AT91C_SD_CARD_INSERTED;
+
+	    if (AT91F_MCI_SendCommand(pMCI_Device, AT91C_SET_RELATIVE_ADDR_CMD, 0) == AT91C_CMD_SEND_OK)
+		{
+			pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address = (AT91C_BASE_MCI->MCI_RSPR[0] >> 16);
+			if (AT91F_MCI_GetCSD(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address,tab_response) == AT91C_CMD_SEND_OK)
+			{
+		  		pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length = 1 << ((tab_response[1] >> AT91C_CSD_RD_B_LEN_S) & AT91C_CSD_RD_B_LEN_M );
+	 			pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length =	1 << ((tab_response[3] >> AT91C_CSD_WBLEN_S) & AT91C_CSD_WBLEN_M );
+				pMCI_Device->pMCI_DeviceFeatures->Sector_Size = 1 + ((tab_response[2] >> AT91C_CSD_v21_SECT_SIZE_S) & AT91C_CSD_v21_SECT_SIZE_M );
+		  		pMCI_Device->pMCI_DeviceFeatures->Read_Partial = (tab_response[1] >> AT91C_CSD_RD_B_PAR_S) & AT91C_CSD_RD_B_PAR_M;
+				pMCI_Device->pMCI_DeviceFeatures->Write_Partial = (tab_response[3] >> AT91C_CSD_WBLOCK_P_S) & AT91C_CSD_WBLOCK_P_M;
+				pMCI_Device->pMCI_DeviceFeatures->Erase_Block_Enable = (tab_response[3] >> AT91C_CSD_v21_ER_BLEN_EN_S) & AT91C_CSD_v21_ER_BLEN_EN_M;
+				pMCI_Device->pMCI_DeviceFeatures->Read_Block_Misalignment = (tab_response[1] >> AT91C_CSD_RD_B_MIS_S) & AT91C_CSD_RD_B_MIS_M;
+				pMCI_Device->pMCI_DeviceFeatures->Write_Block_Misalignment = (tab_response[1] >> AT91C_CSD_WR_B_MIS_S) & AT91C_CSD_WR_B_MIS_M;
+
+				//// Compute Memory Capacity
+					// compute MULT
+					mult = 1 << ( ((tab_response[2] >> AT91C_CSD_C_SIZE_M_S) & AT91C_CSD_C_SIZE_M_M) + 2 );
+					// compute MSB of C_SIZE
+					blocknr = ((tab_response[1] >> AT91C_CSD_CSIZE_H_S) & AT91C_CSD_CSIZE_H_M) << 2;
+					// compute MULT * (LSB of C-SIZE + MSB already computed + 1) = BLOCKNR
+					blocknr = mult * ( ( blocknr + ( (tab_response[2] >> AT91C_CSD_CSIZE_L_S) & AT91C_CSD_CSIZE_L_M) ) + 1 );
+
+					pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity =  pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length * blocknr;
+			  	//// End of Compute Memory Capacity
+					printf("SD-Card: %d Bytes\n\r", pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity);
+
+		  		if( AT91F_MCI_SDCard_SetBusWidth(pMCI_Device) == AT91C_CMD_SEND_OK )
+				{	
+					 if (AT91F_MCI_SetBlocklength(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) == AT91C_CMD_SEND_OK)
+					return AT91C_INIT_OK;
+				}
+			}
+		}
+	}
+    return AT91C_INIT_ERROR;
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_CfgDevice
+//* \brief This function is used to initialise MMC or SDCard Features
+//*----------------------------------------------------------------------------
+void AT91F_CfgDevice(void)
+{
+	// Init Device Structure
+
+	MCI_Device_Features.Relative_Card_Address 		= 0;
+	MCI_Device_Features.Card_Inserted 				= AT91C_CARD_REMOVED;
+	MCI_Device_Features.Max_Read_DataBlock_Length	= 0;
+	MCI_Device_Features.Max_Write_DataBlock_Length 	= 0;
+	MCI_Device_Features.Read_Partial 				= 0;
+	MCI_Device_Features.Write_Partial 				= 0;
+	MCI_Device_Features.Erase_Block_Enable 			= 0;
+	MCI_Device_Features.Sector_Size 				= 0;
+	MCI_Device_Features.Memory_Capacity 			= 0;
+	
+	MCI_Device_Desc.state							= AT91C_MCI_IDLE;
+	MCI_Device_Desc.SDCard_bus_width				= AT91C_MCI_SCDBUS;
+	
+	// Init AT91S_DataFlash Global Structure, by default AT45DB choosen !!!
+	MCI_Device.pMCI_DeviceDesc 		= &MCI_Device_Desc;
+	MCI_Device.pMCI_DeviceFeatures 	= &MCI_Device_Features;
+
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCI_Init
+//* \brief Initialsise Card
+//*----------------------------------------------------------------------------
+int AT91F_MCI_Init(void)
+{
+
+///////////////////////////////////////////////////////////////////////////////////////////
+//  MCI Init : common to MMC and SDCard
+///////////////////////////////////////////////////////////////////////////////////////////
+
+    // Set up PIO SDC_TYPE to switch on MMC/SDCard and not DataFlash Card
+	AT91F_PIO_CfgOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7);
+	AT91F_PIO_SetOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7);
+	
+	// Init MCI for MMC and SDCard interface
+	AT91F_MCI_CfgPIO();	
+	AT91F_MCI_CfgPMC();
+	AT91F_PDC_Open(AT91C_BASE_PDC_MCI);
+
+    // Disable all the interrupts
+    AT91C_BASE_MCI->MCI_IDR = 0xFFFFFFFF;
+
+	// Init MCI Device Structures
+	AT91F_CfgDevice();
+
+	// Configure MCI interrupt 
+	AT91F_AIC_ConfigureIt(AT91C_BASE_AIC,
+						 AT91C_ID_MCI,
+						 AT91C_AIC_PRIOR_HIGHEST,
+						 AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE,
+						 AT91F_ASM_MCI_Handler);
+
+	// Enable MCI interrupt
+	AT91F_AIC_EnableIt(AT91C_BASE_AIC,AT91C_ID_MCI);
+
+	// Enable Receiver
+	AT91F_US_EnableRx((AT91PS_USART) AT91C_BASE_DBGU);
+
+	AT91F_MCI_Configure(AT91C_BASE_MCI,
+						AT91C_MCI_DTOR_1MEGA_CYCLES,
+						AT91C_MCI_MR_PDCMODE,			// 15MHz for MCK = 60MHz (CLKDIV = 1)
+						AT91C_MCI_SDCARD_4BITS_SLOTA);
+	
+	if(AT91F_MCI_SDCard_Init(&MCI_Device) != AT91C_INIT_OK)
+		return FALSE;
+	else
+		return TRUE;
+
+}
+
+//*----------------------------------------------------------------------------
+//* \fn    AT91F_MCIDeviceWaitReady
+//* \brief Wait for MCI Device ready
+//*----------------------------------------------------------------------------
+void AT91F_MCIDeviceWaitReady(unsigned int timeout)
+{
+	volatile int status;
+	
+	do
+	{
+		status = AT91C_BASE_MCI->MCI_SR;
+		timeout--;
+	}
+	while( !(status & AT91C_MCI_NOTBUSY)  && (timeout>0) );	
+}
+
+unsigned int swab32(unsigned int data)
+{
+	unsigned int res = 0;
+
+	res = (data & 0x000000ff) << 24 |
+				(data & 0x0000ff00) << 8  |
+				(data & 0x00ff0000) >> 8  |
+				(data & 0xff000000) >> 24;
+
+	return res;
+}
+
+//*--------------------------------------------------------------------
+//* \fn    AT91F_MCI_ReadBlockSwab
+//* \brief Read Block and swap byte order
+//*--------------------------------------------------------------------
+int AT91F_MCI_ReadBlockSwab(
+	AT91PS_MciDevice pMCI_Device,
+	int src,
+	unsigned int *databuffer,
+	int sizeToRead)
+{
+	int i;
+	unsigned char *buf = (unsigned char *)databuffer;
+
+	//* Read Block 1
+	for(i=0;i<BUFFER_SIZE_MCI_DEVICE;i++)
+		*buf++ = 0x00;	
+	AT91F_MCI_ReadBlock(&MCI_Device,src,databuffer,sizeToRead);
+
+	//* Wait end of Read
+	AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT);
+
+	{
+		int index;
+		unsigned int *uiBuffer = databuffer;
+
+		for(index = 0; index < 512/4; index++)
+			uiBuffer[index] = swab32(uiBuffer[index]);
+	}
+	return(1);
+}
+
diff --git a/target/linux/at91/image/dfboot/src/stdio.h b/target/linux/at91/image/dfboot/src/stdio.h
new file mode 100644
index 0000000..e4e35ec
--- /dev/null
+++ b/target/linux/at91/image/dfboot/src/stdio.h
@@ -0,0 +1,18 @@
+#include <stdarg.h>
+#include <stdbool.h>
+
+#ifndef NULL
+#define NULL ((void *)0)
+#endif
+
+void at91_init_uarts(void);
+int puts(const char *str);
+int putc(int c);
+int putchar(int c);
+int getc();
+
+int strlen(const char *str);
+
+int hvfprintf(const char *fmt, va_list ap);
+
+int printf(const char *fmt, ...);
diff --git a/target/linux/at91/image/u-boot/Makefile b/target/linux/at91/image/u-boot/Makefile
new file mode 100644
index 0000000..6fd667d
--- /dev/null
+++ b/target/linux/at91/image/u-boot/Makefile
@@ -0,0 +1,50 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id$
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=u-boot
+PKG_VERSION:=1.1.4
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
+PKG_MD5SUM:=
+PKG_CAT:=bzcat
+
+include $(INCLUDE_DIR)/package.mk
+
+UBOOT_CONFIG=$(strip $(subst ",, $(CONFIG_UBOOT_TARGET)))
+LAN_IP=$(strip $(CONFIG_UBOOT_IPADDR))
+LAN_SERVERIP=$(strip $(subst ",, $(CONFIG_UBOOT_SERVERIP)))
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) $(UBOOT_CONFIG)_config
+	export CROSS_COMPILE=$(TARGET_CROSS); \
+	export LAN_IP=$(LAN_IP); \
+	export LAN_SERVERIP=$(LAN_SERVERIP); \
+	$(MAKE) -C $(PKG_BUILD_DIR)
+	mkdir -p $(PKG_BUILD_DIR)/ubclient
+	$(CP) ./ubclient/* $(PKG_BUILD_DIR)/ubclient
+	export LAN_IP=$(LAN_IP); \
+	export LAN_SERVERIP=$(LAN_SERVERIP); \
+	$(MAKE) -C $(PKG_BUILD_DIR)/ubclient \
+		$(TARGET_CONFIGURE_OPTS) \
+		CFLAGS="$(TARGET_CFLAGS) -Dtarget_$(BOARD)=1"
+endef
+
+define Build/InstallDev
+	dd if=$(PKG_BUILD_DIR)/u-boot.bin of=$(PKG_BUILD_DIR)/u-boot.block bs=232k count=1 conv=sync
+#	$(INSTALL_DIR) $(STAGING_DIR)/ubclient/sbin
+#	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ubclient/ubpar $(STAGING_DIR)/ubclient/sbin/
+	$(CP) $(PKG_BUILD_DIR)/ubclient/ubpar ../../base-files/default/sbin
+endef
+
+$(eval $(call Build/DefaultTargets))
diff --git a/target/linux/at91/image/u-boot/patches/001-lowlevel-config.patch b/target/linux/at91/image/u-boot/patches/001-lowlevel-config.patch
new file mode 100644
index 0000000..25f92e4
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/001-lowlevel-config.patch
@@ -0,0 +1,91 @@
+--- u-boot-1.1.4/cpu/arm920t/config.mk	2005-12-16 17:39:27.000000000 +0100
++++ u-boot-1.1.4.klaus/cpu/arm920t/config.mk	2006-02-27 19:07:41.000000000 +0100
+@@ -30,5 +30,5 @@
+ # Supply options according to compiler version
+ #
+ # =========================================================================
+-PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
++PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32)
+ PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
+--- u-boot-1.1.4/cpu/arm920t/start.S	2005-12-16 17:39:27.000000000 +0100
++++ u-boot-1.1.4.klaus/cpu/arm920t/start.S	2006-02-22 16:45:24.000000000 +0100
+@@ -237,6 +237,7 @@
+  */
+ 
+ 
++#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ cpu_init_crit:
+ 	/*
+ 	 * flush v4 I/D caches
+@@ -265,6 +266,7 @@
+ 	mov	lr, ip
+ 	mov	pc, lr
+ 
++#endif
+ 
+ /*
+  *************************************************************************
+--- u-boot-1.1.4/examples/Makefile	2005-12-16 17:39:27.000000000 +0100
++++ u-boot-1.1.4.klaus/examples/Makefile	2006-03-02 02:37:14.000000000 +0100
+@@ -30,7 +30,7 @@
+ endif
+ 
+ ifeq ($(ARCH),arm)
+-LOAD_ADDR = 0xc100000
++LOAD_ADDR = 0x21000000
+ endif
+ 
+ ifeq ($(ARCH),mips)
+--- u-boot-1.1.4/include/config.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.4.klaus/include/config.h	2006-02-27 19:04:46.000000000 +0100
+@@ -0,0 +1,2 @@
++/* Automatically generated - do not edit */
++#include <configs/at91rm9200dk.h>
+--- u-boot-1.1.4/include/config.mk	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.4.klaus/include/config.mk	2006-02-27 19:04:46.000000000 +0100
+@@ -0,0 +1,4 @@
++ARCH   = arm
++CPU    = arm920t
++BOARD  = at91rm9200dk
++SOC    = at91rm9200
+--- u-boot-1.1.4/include/configs/at91rm9200dk.h	2005-12-16 17:39:27.000000000 +0100
++++ u-boot-1.1.4.klaus/include/configs/at91rm9200dk.h	2006-02-26 22:44:17.000000000 +0100
+@@ -25,6 +25,11 @@
+ #ifndef __CONFIG_H
+ #define __CONFIG_H
+ 
++// Added 2 defines to skip re-init lowlevel and relocate HCG HLH
++//
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SKIP_RELOCATE_UBOOT
++
+ /* ARM asynchronous clock */
+ #define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
+ #define AT91C_MASTER_CLOCK	59904000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
+@@ -165,12 +170,12 @@
+ #define CFG_FLASH_ERASE_TOUT		(2*CFG_HZ) /* Timeout for Flash Erase */
+ #define CFG_FLASH_WRITE_TOUT		(2*CFG_HZ) /* Timeout for Flash Write */
+ 
+-#undef	CFG_ENV_IS_IN_DATAFLASH
++#define	CFG_ENV_IS_IN_DATAFLASH
+ 
+ #ifdef CFG_ENV_IS_IN_DATAFLASH
+-#define CFG_ENV_OFFSET			0x20000
++#define CFG_ENV_OFFSET			0x21000
+ #define CFG_ENV_ADDR			(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+-#define CFG_ENV_SIZE			0x2000  /* 0x8000 */
++#define CFG_ENV_SIZE			0x8400  /* 0x8000 */
+ #else
+ #define CFG_ENV_IS_IN_FLASH		1
+ #ifdef CONFIG_SKIP_LOWLEVEL_INIT
+--- u-boot-1.1.4/Makefile	2005-12-16 17:39:27.000000000 +0100
++++ u-boot-1.1.4.klaus/Makefile	2006-03-02 02:49:23.000000000 +0100
+@@ -57,7 +57,7 @@
+ CROSS_COMPILE = powerpc-linux-
+ endif
+ ifeq ($(ARCH),arm)
+-CROSS_COMPILE = arm-linux-
++CROSS_COMPILE = ../staging_dir/bin/arm-linux-
+ endif
+ ifeq ($(ARCH),i386)
+ ifeq ($(HOSTARCH),i387)
diff --git a/target/linux/at91/image/u-boot/patches/002-dataflash_machine.patch b/target/linux/at91/image/u-boot/patches/002-dataflash_machine.patch
new file mode 100644
index 0000000..cf7648c
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/002-dataflash_machine.patch
@@ -0,0 +1,6065 @@
+diff -Naur u-boot-1.1.4.org/board/vlink/at45.c u-boot-1.1.4.tmp/board/vlink/at45.c
+--- u-boot-1.1.4.org/board/vlink/at45.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.4.tmp/board/vlink/at45.c	2005-12-16 17:39:27.000000000 +0100
+@@ -0,0 +1,621 @@
++/* Driver for ATMEL DataFlash support
++ * Author : Hamid Ikdoumi (Atmel)
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <config.h>
++#include <common.h>
++#include <asm/hardware.h>
++
++#ifdef CONFIG_HAS_DATAFLASH
++#include <dataflash.h>
++
++#define AT91C_SPI_CLK	10000000	/* Max Value = 10MHz to be compliant to
++the Continuous Array Read function */
++
++/* AC Characteristics */
++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS	(0xC << 16)
++#define DATAFLASH_TCHS	(0x1 << 24)
++
++#define AT91C_TIMEOUT_WRDY			200000
++#define AT91C_SPI_PCS0_SERIAL_DATAFLASH		0xE     /* Chip Select 0 : NPCS0 %1110 */
++#define AT91C_SPI_PCS3_DATAFLASH_CARD		0x7     /* Chip Select 3 : NPCS3 %0111 */
++
++void AT91F_SpiInit(void) {
++
++/*-------------------------------------------------------------------*/
++/*	SPI DataFlash Init								*/
++/*-------------------------------------------------------------------*/
++	/* Configure PIOs */
++	AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
++				   AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK;
++	AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
++				   AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK;
++	/* Enable CLock */
++	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI;
++
++	/* Reset the SPI */
++	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST;
++
++	/* Configure SPI in Master Mode with No CS selected !!! */
++	AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;
++
++	/* Configure CS0 and CS3 */
++	*(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT &
++	DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
++
++	*(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT &
++	DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
++
++}
++
++void AT91F_SpiEnable(int cs) {
++	switch(cs) {
++	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
++		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
++		AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) & AT91C_SPI_PCS);
++		break;
++	case 3:	/* Configure SPI CS3 for Serial DataFlash Card */
++		/* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */
++		AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7;	/* Set in PIO mode */
++		AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7;	/* Configure in output */
++		/* Clear Output */
++		AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7;
++		/* Configure PCS */
++		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
++		AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
++		break;
++	}
++
++	/* SPI_Enable */
++	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN;
++}
++
++/*----------------------------------------------------------------------------*/
++/* \fn    AT91F_SpiWrite						      */
++/* \brief Set the PDC registers for a transfert				      */
++/*----------------------------------------------------------------------------*/
++unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc )
++{
++	unsigned int timeout;
++
++	pDesc->state = BUSY;
++
++	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
++
++	/* Initialize the Transmit and Receive Pointer */
++	AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ;
++	AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ;
++
++	/* Intialize the Transmit and Receive Counters */
++	AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size;
++	AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size;
++
++	if ( pDesc->tx_data_size != 0 ) {
++		/* Initialize the Next Transmit and Next Receive Pointer */
++		AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ;
++		AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ;
++
++		/* Intialize the Next Transmit and Next Receive Counters */
++		AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ;
++		AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ;
++	}
++
++	/* arm simple, non interrupt dependent timer */
++	reset_timer_masked();
++	timeout = 0;
++
++	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
++	while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) && ((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT));
++	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
++	pDesc->state = IDLE;
++
++	if (timeout >= CFG_SPI_WRITE_TOUT){
++		printf("Error Timeout\n\r");
++		return DATAFLASH_ERROR;
++	}
++
++	return DATAFLASH_OK;
++}
++
++
++/*----------------------------------------------------------------------*/
++/* \fn    AT91F_DataFlashSendCommand					*/
++/* \brief Generic function to send a command to the dataflash		*/
++/*----------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_DataFlashSendCommand(
++	AT91PS_DataFlash pDataFlash,
++	unsigned char OpCode,
++	unsigned int CmdSize,
++	unsigned int DataflashAddress)
++{
++    unsigned int adr;
++
++	if ( (pDataFlash->pDataFlashDesc->state) != IDLE)
++		return DATAFLASH_BUSY;
++
++	/* process the address to obtain page address and byte address */
++	adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) << pDataFlash->pDevice->page_offset) + (DataflashAddress % (pDataFlash->pDevice->pages_size));
++
++	/* fill the  command  buffer */
++	pDataFlash->pDataFlashDesc->command[0] = OpCode;
++	if (pDataFlash->pDevice->pages_number >= 16384) {
++		pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x0F000000) >> 24);
++		pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x00FF0000) >> 16);
++		pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((adr & 0x0000FF00) >> 8);
++		pDataFlash->pDataFlashDesc->command[4] = (unsigned char)(adr & 0x000000FF);
++	} else {
++		pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16);
++		pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8);
++		pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ;
++		pDataFlash->pDataFlashDesc->command[4] = 0;
++	}
++	pDataFlash->pDataFlashDesc->command[5] = 0;
++	pDataFlash->pDataFlashDesc->command[6] = 0;
++	pDataFlash->pDataFlashDesc->command[7] = 0;
++
++	/* Initialize the SpiData structure for the spi write fuction */
++	pDataFlash->pDataFlashDesc->tx_cmd_pt   =  pDataFlash->pDataFlashDesc->command ;
++	pDataFlash->pDataFlashDesc->tx_cmd_size =  CmdSize ;
++	pDataFlash->pDataFlashDesc->rx_cmd_pt   =  pDataFlash->pDataFlashDesc->command ;
++	pDataFlash->pDataFlashDesc->rx_cmd_size =  CmdSize ;
++
++	/* send the command and read the data */
++	return AT91F_SpiWrite (pDataFlash->pDataFlashDesc);
++}
++
++
++/*----------------------------------------------------------------------*/
++/* \fn    AT91F_DataFlashGetStatus					*/
++/* \brief Read the status register of the dataflash			*/
++/*----------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc)
++{
++	AT91S_DataFlashStatus status;
++
++	/* if a transfert is in progress ==> return 0 */
++	if( (pDesc->state) != IDLE)
++		return DATAFLASH_BUSY;
++
++	/* first send the read status command (D7H) */
++	pDesc->command[0] = DB_STATUS;
++	pDesc->command[1] = 0;
++
++	pDesc->DataFlash_state  = GET_STATUS;
++	pDesc->tx_data_size 	= 0 ;	/* Transmit the command and receive response */
++	pDesc->tx_cmd_pt 		= pDesc->command ;
++	pDesc->rx_cmd_pt 		= pDesc->command ;
++	pDesc->rx_cmd_size 		= 2 ;
++	pDesc->tx_cmd_size 		= 2 ;
++	status = AT91F_SpiWrite (pDesc);
++
++	pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1);
++
++	return status;
++}
++
++
++/*----------------------------------------------------------------------*/
++/* \fn    AT91F_DataFlashWaitReady					*/
++/* \brief wait for dataflash ready (bit7 of the status register == 1)	*/
++/*----------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc pDataFlashDesc, unsigned int timeout)
++{
++	pDataFlashDesc->DataFlash_state = IDLE;
++
++	do {
++		AT91F_DataFlashGetStatus(pDataFlashDesc);
++		timeout--;
++	} while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0) );
++
++	if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80)
++		return DATAFLASH_ERROR;
++
++	return DATAFLASH_OK;
++}
++
++
++/*------------------------------------------------------------------------------*/
++/* Function Name       : AT91F_DataFlashContinuousRead 				*/
++/* Object              : Continuous stream Read 				*/
++/* Input Parameters    : DataFlash Service					*/
++/*						: <src> = dataflash address	*/
++/*                     : <*dataBuffer> = data buffer pointer			*/
++/*                     : <sizeToRead> = data buffer size			*/
++/* Return value		: State of the dataflash				*/
++/*------------------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_DataFlashContinuousRead (
++	AT91PS_DataFlash pDataFlash,
++	int src,
++	unsigned char *dataBuffer,
++	int sizeToRead )
++{
++	AT91S_DataFlashStatus status;
++	/* Test the size to read in the device */
++	if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
++		return DATAFLASH_MEMORY_OVERFLOW;
++
++	pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer;
++	pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead;
++	pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer;
++	pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead;
++
++	status = AT91F_DataFlashSendCommand (pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src);
++	/* Send the command to the dataflash */
++	return(status);
++}
++
++
++/*------------------------------------------------------------------------------*/
++/* Function Name       : AT91F_DataFlashPagePgmBuf				*/
++/* Object              : Main memory page program through buffer 1 or buffer 2	*/
++/* Input Parameters    : DataFlash Service					*/
++/*						: <*src> = Source buffer	*/
++/*                     : <dest> = dataflash destination address			*/
++/*                     : <SizeToWrite> = data buffer size			*/
++/* Return value		: State of the dataflash				*/
++/*------------------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(
++	AT91PS_DataFlash pDataFlash,
++	unsigned char *src,
++	unsigned int dest,
++	unsigned int SizeToWrite)
++{
++	int cmdsize;
++	pDataFlash->pDataFlashDesc->tx_data_pt = src ;
++	pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ;
++	pDataFlash->pDataFlashDesc->rx_data_pt = src;
++	pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite;
++
++	cmdsize = 4;
++	/* Send the command to the dataflash */
++	if (pDataFlash->pDevice->pages_number >= 16384)
++		cmdsize = 5;
++	return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1, cmdsize, dest));
++}
++
++
++/*------------------------------------------------------------------------------*/
++/* Function Name       : AT91F_MainMemoryToBufferTransfert			*/
++/* Object              : Read a page in the SRAM Buffer 1 or 2			*/
++/* Input Parameters    : DataFlash Service					*/
++/*                     : Page concerned						*/
++/*                     : 							*/
++/* Return value		: State of the dataflash				*/
++/*------------------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert(
++	AT91PS_DataFlash pDataFlash,
++	unsigned char BufferCommand,
++	unsigned int page)
++{
++	int cmdsize;
++	/* Test if the buffer command is legal */
++	if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF))
++		return DATAFLASH_BAD_COMMAND;
++
++	/* no data to transmit or receive */
++	pDataFlash->pDataFlashDesc->tx_data_size = 0;
++	cmdsize = 4;
++	if (pDataFlash->pDevice->pages_number >= 16384)
++		cmdsize = 5;
++	return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, page*pDataFlash->pDevice->pages_size));
++}
++
++
++/*----------------------------------------------------------------------------- */
++/* Function Name       : AT91F_DataFlashWriteBuffer				*/
++/* Object              : Write data to the internal sram buffer 1 or 2		*/
++/* Input Parameters    : DataFlash Service					*/
++/*			: <BufferCommand> = command to write buffer1 or buffer2	*/
++/*                     : <*dataBuffer> = data buffer to write			*/
++/*                     : <bufferAddress> = address in the internal buffer	*/
++/*                     : <SizeToWrite> = data buffer size			*/
++/* Return value		: State of the dataflash				*/
++/*------------------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer (
++	AT91PS_DataFlash pDataFlash,
++	unsigned char BufferCommand,
++	unsigned char *dataBuffer,
++	unsigned int bufferAddress,
++	int SizeToWrite )
++{
++	int cmdsize;
++	/* Test if the buffer command is legal */
++	if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE))
++		return DATAFLASH_BAD_COMMAND;
++
++	/* buffer address must be lower than page size */
++	if (bufferAddress > pDataFlash->pDevice->pages_size)
++		return DATAFLASH_BAD_ADDRESS;
++
++	if ( (pDataFlash->pDataFlashDesc->state)  != IDLE)
++		return DATAFLASH_BUSY;
++
++	/* Send first Write Command */
++	pDataFlash->pDataFlashDesc->command[0] = BufferCommand;
++	pDataFlash->pDataFlashDesc->command[1] = 0;
++	if (pDataFlash->pDevice->pages_number >= 16384) {
++	    	pDataFlash->pDataFlashDesc->command[2] = 0;
++	    	pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress &  pDataFlash->pDevice->byte_mask)) >> 8) ;
++	    	pDataFlash->pDataFlashDesc->command[4] = (unsigned char)((unsigned int)bufferAddress  & 0x00FF) ;
++		cmdsize = 5;
++	} else {
++	    	pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress &  pDataFlash->pDevice->byte_mask)) >> 8) ;
++	    	pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress  & 0x00FF) ;
++	    	pDataFlash->pDataFlashDesc->command[4] = 0;
++		cmdsize = 4;
++	}
++
++	pDataFlash->pDataFlashDesc->tx_cmd_pt 	 = pDataFlash->pDataFlashDesc->command ;
++	pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize ;
++	pDataFlash->pDataFlashDesc->rx_cmd_pt 	 = pDataFlash->pDataFlashDesc->command ;
++	pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize ;
++
++	pDataFlash->pDataFlashDesc->rx_data_pt 	= dataBuffer ;
++	pDataFlash->pDataFlashDesc->tx_data_pt 	= dataBuffer ;
++	pDataFlash->pDataFlashDesc->rx_data_size 	= SizeToWrite ;
++	pDataFlash->pDataFlashDesc->tx_data_size 	= SizeToWrite ;
++
++	return AT91F_SpiWrite(pDataFlash->pDataFlashDesc);
++}
++
++/*------------------------------------------------------------------------------*/
++/* Function Name       : AT91F_PageErase                                        */
++/* Object              : Erase a page 						*/
++/* Input Parameters    : DataFlash Service					*/
++/*                     : Page concerned						*/
++/*                     : 							*/
++/* Return value		: State of the dataflash				*/
++/*------------------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_PageErase(
++	AT91PS_DataFlash pDataFlash,
++	unsigned int page)
++{
++	int cmdsize;
++	/* Test if the buffer command is legal */
++	/* no data to transmit or receive */
++    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
++
++	cmdsize = 4;
++	if (pDataFlash->pDevice->pages_number >= 16384)
++		cmdsize = 5;
++	return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_ERASE, cmdsize, page*pDataFlash->pDevice->pages_size));
++}
++
++
++/*------------------------------------------------------------------------------*/
++/* Function Name       : AT91F_BlockErase                                       */
++/* Object              : Erase a Block 						*/
++/* Input Parameters    : DataFlash Service					*/
++/*                     : Page concerned						*/
++/*                     : 							*/
++/* Return value		: State of the dataflash				*/
++/*------------------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_BlockErase(
++	AT91PS_DataFlash pDataFlash,
++	unsigned int block)
++{
++	int cmdsize;
++	/* Test if the buffer command is legal */
++	/* no data to transmit or receive */
++    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
++	cmdsize = 4;
++	if (pDataFlash->pDevice->pages_number >= 16384)
++		cmdsize = 5;
++	return(AT91F_DataFlashSendCommand (pDataFlash, DB_BLOCK_ERASE,cmdsize, block*8*pDataFlash->pDevice->pages_size));
++}
++
++/*------------------------------------------------------------------------------*/
++/* Function Name       : AT91F_WriteBufferToMain				*/
++/* Object              : Write buffer to the main memory			*/
++/* Input Parameters    : DataFlash Service					*/
++/*		: <BufferCommand> = command to send to buffer1 or buffer2	*/
++/*                     : <dest> = main memory address				*/
++/* Return value		: State of the dataflash				*/
++/*------------------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_WriteBufferToMain (
++	AT91PS_DataFlash pDataFlash,
++	unsigned char BufferCommand,
++	unsigned int dest )
++{
++	int cmdsize;
++	/* Test if the buffer command is correct */
++	if ((BufferCommand != DB_BUF1_PAGE_PGM) &&
++	    (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) &&
++	    (BufferCommand != DB_BUF2_PAGE_PGM) &&
++	    (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) )
++		return DATAFLASH_BAD_COMMAND;
++
++	/* no data to transmit or receive */
++	pDataFlash->pDataFlashDesc->tx_data_size = 0;
++
++	cmdsize = 4;
++	if (pDataFlash->pDevice->pages_number >= 16384)
++		cmdsize = 5;
++	/* Send the command to the dataflash */
++	return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, dest));
++}
++
++
++/*------------------------------------------------------------------------------*/
++/* Function Name       : AT91F_PartialPageWrite					*/
++/* Object              : Erase partielly a page					*/
++/* Input Parameters    : <page> = page number					*/
++/*			: <AdrInpage> = adr to begin the fading			*/
++/*                     : <length> = Number of bytes to erase			*/
++/*------------------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_PartialPageWrite (
++	AT91PS_DataFlash pDataFlash,
++	unsigned char *src,
++	unsigned int dest,
++	unsigned int size)
++{
++	unsigned int page;
++	unsigned int AdrInPage;
++
++	page = dest / (pDataFlash->pDevice->pages_size);
++	AdrInPage = dest % (pDataFlash->pDevice->pages_size);
++
++	/* Read the contents of the page in the Sram Buffer */
++	AT91F_MainMemoryToBufferTransfert(pDataFlash, DB_PAGE_2_BUF1_TRF, page);
++	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
++	/*Update the SRAM buffer */
++	AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size);
++
++	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
++
++	/* Erase page if a 128 Mbits device */
++	if (pDataFlash->pDevice->pages_number >= 16384) {
++		AT91F_PageErase(pDataFlash, page);
++		/* Rewrite the modified Sram Buffer in the main memory */
++		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
++	}
++
++	/* Rewrite the modified Sram Buffer in the main memory */
++	return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, (page*pDataFlash->pDevice->pages_size)));
++}
++
++
++/*------------------------------------------------------------------------------*/
++/* Function Name       : AT91F_DataFlashWrite					*/
++/* Object              :							*/
++/* Input Parameters    : <*src> = Source buffer					*/
++/*                     : <dest> = dataflash adress				*/
++/*                     : <size> = data buffer size				*/
++/*------------------------------------------------------------------------------*/
++AT91S_DataFlashStatus AT91F_DataFlashWrite(
++	AT91PS_DataFlash pDataFlash,
++	unsigned char *src,
++	int dest,
++	int size )
++{
++	unsigned int length;
++	unsigned int page;
++	unsigned int status;
++
++	AT91F_SpiEnable(pDataFlash->pDevice->cs);
++
++	if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
++		return DATAFLASH_MEMORY_OVERFLOW;
++
++	/* If destination does not fit a page start address */
++	if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size)))  != 0 ) {
++		length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size)));
++
++		if (size < length)
++			length = size;
++
++		if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length))
++			return DATAFLASH_ERROR;
++
++		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
++
++		/* Update size, source and destination pointers */
++		size -= length;
++		dest += length;
++		src += length;
++	}
++
++	while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) {
++		/* program dataflash page */
++		page = (unsigned int)dest / (pDataFlash->pDevice->pages_size);
++
++		status = AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, 0, pDataFlash->pDevice->pages_size);
++		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
++
++		status = AT91F_PageErase(pDataFlash, page);
++		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
++		if (!status)
++			return DATAFLASH_ERROR;
++
++		status = AT91F_WriteBufferToMain (pDataFlash, DB_BUF1_PAGE_PGM, dest);
++		if(!status)
++			return DATAFLASH_ERROR;
++
++		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
++
++		/* Update size, source and destination pointers */
++		size -= pDataFlash->pDevice->pages_size ;
++		dest += pDataFlash->pDevice->pages_size ;
++		src  += pDataFlash->pDevice->pages_size ;
++	}
++
++	/* If still some bytes to read */
++	if ( size > 0 ) {
++		/* program dataflash page */
++		if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) )
++			return DATAFLASH_ERROR;
++
++		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
++	}
++	return DATAFLASH_OK;
++}
++
++
++/*------------------------------------------------------------------------------*/
++/* Function Name       : AT91F_DataFlashRead 					*/
++/* Object              : Read a block in dataflash				*/
++/* Input Parameters    : 							*/
++/* Return value		: 							*/
++/*------------------------------------------------------------------------------*/
++int AT91F_DataFlashRead(
++	AT91PS_DataFlash pDataFlash,
++	unsigned long addr,
++	unsigned long size,
++	char *buffer)
++{
++	unsigned long SizeToRead;
++
++	AT91F_SpiEnable(pDataFlash->pDevice->cs);
++
++	if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
++		return -1;
++
++	while (size) {
++		SizeToRead = (size < 0x8000)? size:0x8000;
++
++		if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
++			return -1;
++
++		if (AT91F_DataFlashContinuousRead (pDataFlash, addr, buffer, SizeToRead) != DATAFLASH_OK)
++			return -1;
++
++		size -= SizeToRead;
++		addr += SizeToRead;
++		buffer += SizeToRead;
++	}
++
++	return DATAFLASH_OK;
++}
++
++
++/*------------------------------------------------------------------------------*/
++/* Function Name       : AT91F_DataflashProbe 					*/
++/* Object              : 							*/
++/* Input Parameters    : 							*/
++/* Return value	       : Dataflash status register				*/
++/*------------------------------------------------------------------------------*/
++int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc)
++{
++	AT91F_SpiEnable(cs);
++	AT91F_DataFlashGetStatus(pDesc);
++	return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C);
++}
++
++#endif
+diff -Naur u-boot-1.1.4.org/board/vlink/config.mk u-boot-1.1.4.tmp/board/vlink/config.mk
+--- u-boot-1.1.4.org/board/vlink/config.mk	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.4.tmp/board/vlink/config.mk	2005-12-16 17:39:27.000000000 +0100
+@@ -0,0 +1 @@
++TEXT_BASE = 0x21f00000
+diff -Naur u-boot-1.1.4.org/board/vlink/flash.c u-boot-1.1.4.tmp/board/vlink/flash.c
+--- u-boot-1.1.4.org/board/vlink/flash.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.4.tmp/board/vlink/flash.c	2006-06-05 02:44:43.000000000 +0200
+@@ -0,0 +1,504 @@
++/*
++ * (C) Copyright 2002
++ * Lineo, Inc. <www.lineo.com>
++ * Bernhard Kuhn <bkuhn@lineo.com>
++ *
++ * (C) Copyright 2002
++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
++ * Alex Zuepke <azu@sysgo.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++
++ulong myflush(void);
++
++
++/* Flash Organization Structure */
++typedef struct OrgDef
++{
++	unsigned int sector_number;
++	unsigned int sector_size;
++} OrgDef;
++
++
++/* Flash Organizations */
++OrgDef OrgAT49BV16x4[] =
++{
++	{  8,  8*1024 },	/*   8 *  8 kBytes sectors */
++	{  2, 32*1024 },	/*   2 * 32 kBytes sectors */
++	{ 30, 64*1024 },	/*  30 * 64 kBytes sectors */
++};
++
++OrgDef OrgAT49BV16x4A[] =
++{
++	{  8,  8*1024 },	/*   8 *  8 kBytes sectors */
++	{ 31, 64*1024 },	/*  31 * 64 kBytes sectors */
++};
++
++OrgDef OrgAT49BV6416[] =
++{
++	{   8,  8*1024 },	/*   8 *  8 kBytes sectors */
++	{ 127, 64*1024 },	/* 127 * 64 kBytes sectors */
++};
++
++flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
++
++/* AT49BV1614A Codes */
++#define FLASH_CODE1		0xAA
++#define FLASH_CODE2		0x55
++#define ID_IN_CODE		0x90
++#define ID_OUT_CODE		0xF0
++
++
++#define CMD_READ_ARRAY		0x00F0
++#define CMD_UNLOCK1		0x00AA
++#define CMD_UNLOCK2		0x0055
++#define CMD_ERASE_SETUP		0x0080
++#define CMD_ERASE_CONFIRM	0x0030
++#define CMD_PROGRAM		0x00A0
++#define CMD_UNLOCK_BYPASS	0x0020
++#define CMD_SECTOR_UNLOCK	0x0070
++
++#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1)))
++#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1)))
++
++#define BIT_ERASE_DONE		0x0080
++#define BIT_RDY_MASK		0x0080
++#define BIT_PROGRAM_ERROR	0x0020
++#define BIT_TIMEOUT		0x80000000 /* our flag */
++
++#define READY 1
++#define ERR   2
++#define TMO   4
++
++/*-----------------------------------------------------------------------
++ */
++void flash_identification (flash_info_t * info)
++{
++	volatile u16 manuf_code, device_code, add_device_code;
++
++	MEM_FLASH_ADDR1 = FLASH_CODE1;
++	MEM_FLASH_ADDR2 = FLASH_CODE2;
++	MEM_FLASH_ADDR1 = ID_IN_CODE;
++
++	manuf_code = *(volatile u16 *) CFG_FLASH_BASE;
++	device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2);
++	add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1));
++
++	MEM_FLASH_ADDR1 = FLASH_CODE1;
++	MEM_FLASH_ADDR2 = FLASH_CODE2;
++	MEM_FLASH_ADDR1 = ID_OUT_CODE;
++
++	/* Vendor type */
++	info->flash_id = ATM_MANUFACT & FLASH_VENDMASK;
++	printf ("Atmel: ");
++
++	if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
++
++		if ((add_device_code & FLASH_TYPEMASK) ==
++			(ATM_ID_BV1614A & FLASH_TYPEMASK)) {
++			info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK;
++			printf ("AT49BV1614A (16Mbit)\n");
++		} else {				/* AT49BV1614 Flash */
++			info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK;
++			printf ("AT49BV1614 (16Mbit)\n");
++		}
++
++	} else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) {
++		info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK;
++		printf ("AT49BV6416 (64Mbit)\n");
++	}
++}
++
++ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks)
++{
++	int i, nb_sectors = 0;
++
++	for (i=0; i<nb_blocks; i++){
++		nb_sectors += pOrgDef[i].sector_number;
++	}
++
++	return nb_sectors;
++}
++
++void flash_unlock_sector(flash_info_t * info, unsigned int sector)
++{
++	volatile u16 *addr = (volatile u16 *) (info->start[sector]);
++
++	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
++	*addr = CMD_SECTOR_UNLOCK;
++}
++
++
++ulong flash_init (void)
++{
++	int i, j, k;
++	unsigned int flash_nb_blocks, sector;
++	unsigned int start_address;
++	OrgDef *pOrgDef;
++
++	ulong size = 0;
++
++	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
++		ulong flashbase = 0;
++
++		flash_identification (&flash_info[i]);
++
++		if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
++			(ATM_ID_BV1614 & FLASH_TYPEMASK)) {
++
++			pOrgDef = OrgAT49BV16x4;
++			flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef);
++		} else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
++			(ATM_ID_BV1614A & FLASH_TYPEMASK)){	/* AT49BV1614A Flash */
++
++			pOrgDef = OrgAT49BV16x4A;
++			flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef);
++		} else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
++			(ATM_ID_BV6416 & FLASH_TYPEMASK)){	/* AT49BV6416 Flash */
++
++			pOrgDef = OrgAT49BV6416;
++			flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef);
++		} else {
++			flash_nb_blocks = 0;
++			pOrgDef = OrgAT49BV16x4;
++		}
++
++		flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks);
++		memset (flash_info[i].protect, 0, flash_info[i].sector_count);
++
++		if (i == 0)
++			flashbase = PHYS_FLASH_1;
++		else
++			panic ("configured too many flash banks!\n");
++
++		sector = 0;
++		start_address = flashbase;
++		flash_info[i].size = 0;
++
++		for (j = 0; j < flash_nb_blocks; j++) {
++			for (k = 0; k < pOrgDef[j].sector_number; k++) {
++				flash_info[i].start[sector++] = start_address;
++				start_address += pOrgDef[j].sector_size;
++				flash_info[i].size += pOrgDef[j].sector_size;
++			}
++		}
++
++		size += flash_info[i].size;
++
++		if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
++			(ATM_ID_BV6416 & FLASH_TYPEMASK)){	/* AT49BV6416 Flash */
++
++			/* Unlock all sectors at reset */
++			for (j=0; j<flash_info[i].sector_count; j++){
++				flash_unlock_sector(&flash_info[i], j);
++			}
++		}
++	}
++
++	/* Protect binary boot image */
++	flash_protect (FLAG_PROTECT_SET,
++		       CFG_FLASH_BASE,
++		       CFG_FLASH_BASE + CFG_BOOT_SIZE - 1, &flash_info[0]);
++
++	/* Protect environment variables */
++	flash_protect (FLAG_PROTECT_SET,
++		       CFG_ENV_ADDR,
++		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
++
++	/* Protect U-Boot gzipped image */
++	flash_protect (FLAG_PROTECT_SET,
++		       CFG_U_BOOT_BASE,
++		       CFG_U_BOOT_BASE + CFG_U_BOOT_SIZE - 1, &flash_info[0]);
++
++	return size;
++}
++
++/*-----------------------------------------------------------------------
++ */
++void flash_print_info (flash_info_t * info)
++{
++	int i;
++
++	switch (info->flash_id & FLASH_VENDMASK) {
++	case (ATM_MANUFACT & FLASH_VENDMASK):
++		printf ("Atmel: ");
++		break;
++	default:
++		printf ("Unknown Vendor ");
++		break;
++	}
++
++	switch (info->flash_id & FLASH_TYPEMASK) {
++	case (ATM_ID_BV1614 & FLASH_TYPEMASK):
++		printf ("AT49BV1614 (16Mbit)\n");
++		break;
++	case (ATM_ID_BV1614A & FLASH_TYPEMASK):
++		printf ("AT49BV1614A (16Mbit)\n");
++		break;
++	case (ATM_ID_BV6416 & FLASH_TYPEMASK):
++		printf ("AT49BV6416 (64Mbit)\n");
++		break;
++	default:
++		printf ("Unknown Chip Type\n");
++		return;
++	}
++
++	printf ("  Size: %ld MB in %d Sectors\n",
++		info->size >> 20, info->sector_count);
++
++	printf ("  Sector Start Addresses:");
++	for (i = 0; i < info->sector_count; i++) {
++		if ((i % 5) == 0) {
++			printf ("\n   ");
++		}
++		printf (" %08lX%s", info->start[i],
++			info->protect[i] ? " (RO)" : "     ");
++	}
++	printf ("\n");
++}
++
++/*-----------------------------------------------------------------------
++ */
++
++int flash_erase (flash_info_t * info, int s_first, int s_last)
++{
++	ulong result;
++	int iflag, cflag, prot, sect;
++	int rc = ERR_OK;
++	int chip1;
++
++	/* first look for protection bits */
++
++	if (info->flash_id == FLASH_UNKNOWN)
++		return ERR_UNKNOWN_FLASH_TYPE;
++
++	if ((s_first < 0) || (s_first > s_last)) {
++		return ERR_INVAL;
++	}
++
++	if ((info->flash_id & FLASH_VENDMASK) !=
++		(ATM_MANUFACT & FLASH_VENDMASK)) {
++		return ERR_UNKNOWN_FLASH_VENDOR;
++	}
++
++	prot = 0;
++	for (sect = s_first; sect <= s_last; ++sect) {
++		if (info->protect[sect]) {
++			prot++;
++		}
++	}
++	if (prot)
++		return ERR_PROTECTED;
++
++	/*
++	 * Disable interrupts which might cause a timeout
++	 * here. Remember that our exception vectors are
++	 * at address 0 in the flash, and we don't want a
++	 * (ticker) exception to happen while the flash
++	 * chip is in programming mode.
++	 */
++	cflag = icache_status ();
++	icache_disable ();
++	iflag = disable_interrupts ();
++
++	/* Start erase on unprotected sectors */
++	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
++		printf ("Erasing sector %2d ... ", sect);
++
++		/* arm simple, non interrupt dependent timer */
++		reset_timer_masked ();
++
++		if (info->protect[sect] == 0) {	/* not protected */
++			volatile u16 *addr = (volatile u16 *) (info->start[sect]);
++
++			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
++			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
++			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
++
++			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
++			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
++			*addr = CMD_ERASE_CONFIRM;
++
++			/* wait until flash is ready */
++			chip1 = 0;
++
++			do {
++				result = *addr;
++
++				/* check timeout */
++				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
++					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
++					chip1 = TMO;
++					break;
++				}
++
++				if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
++					chip1 = READY;
++
++			} while (!chip1);
++
++			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
++
++			if (chip1 == ERR) {
++				rc = ERR_PROG_ERROR;
++				goto outahere;
++			}
++			if (chip1 == TMO) {
++				rc = ERR_TIMOUT;
++				goto outahere;
++			}
++
++			printf ("ok.\n");
++		} else {			/* it was protected */
++			printf ("protected!\n");
++		}
++	}
++
++	if (ctrlc ())
++		printf ("User Interrupt!\n");
++
++outahere:
++	/* allow flash to settle - wait 10 ms */
++	udelay_masked (10000);
++
++	if (iflag)
++		enable_interrupts ();
++
++	if (cflag)
++		icache_enable ();
++
++	return rc;
++}
++
++/*-----------------------------------------------------------------------
++ * Copy memory to flash
++ */
++
++volatile static int write_word (flash_info_t * info, ulong dest,
++								ulong data)
++{
++	volatile u16 *addr = (volatile u16 *) dest;
++	ulong result;
++	int rc = ERR_OK;
++	int cflag, iflag;
++	int chip1;
++
++	/*
++	 * Check if Flash is (sufficiently) erased
++	 */
++	result = *addr;
++	if ((result & data) != data)
++		return ERR_NOT_ERASED;
++
++
++	/*
++	 * Disable interrupts which might cause a timeout
++	 * here. Remember that our exception vectors are
++	 * at address 0 in the flash, and we don't want a
++	 * (ticker) exception to happen while the flash
++	 * chip is in programming mode.
++	 */
++	cflag = icache_status ();
++	icache_disable ();
++	iflag = disable_interrupts ();
++
++	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
++	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
++	MEM_FLASH_ADDR1 = CMD_PROGRAM;
++	*addr = data;
++
++	/* arm simple, non interrupt dependent timer */
++	reset_timer_masked ();
++
++	/* wait until flash is ready */
++	chip1 = 0;
++	do {
++		result = *addr;
++
++		/* check timeout */
++		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
++			chip1 = ERR | TMO;
++			break;
++		}
++		if (!chip1 && ((result & 0x80) == (data & 0x80)))
++			chip1 = READY;
++
++	} while (!chip1);
++
++	*addr = CMD_READ_ARRAY;
++
++	if (chip1 == ERR || *addr != data)
++		rc = ERR_PROG_ERROR;
++
++	if (iflag)
++		enable_interrupts ();
++
++	if (cflag)
++		icache_enable ();
++
++	return rc;
++}
++
++/*-----------------------------------------------------------------------
++ * Copy memory to flash.
++ */
++
++int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
++{
++	ulong wp, data;
++	int rc;
++
++	if (addr & 1) {
++		printf ("unaligned destination not supported\n");
++		return ERR_ALIGN;
++	};
++
++	if ((int) src & 1) {
++		printf ("unaligned source not supported\n");
++		return ERR_ALIGN;
++	};
++
++	wp = addr;
++
++	while (cnt >= 2) {
++		data = *((volatile u16 *) src);
++		if ((rc = write_word (info, wp, data)) != 0) {
++			return (rc);
++		}
++		src += 2;
++		wp += 2;
++		cnt -= 2;
++	}
++
++	if (cnt == 1) {
++		data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) <<
++										   8);
++		if ((rc = write_word (info, wp, data)) != 0) {
++			return (rc);
++		}
++		src += 1;
++		wp += 1;
++		cnt -= 1;
++	};
++
++	return ERR_OK;
++}
+diff -Naur u-boot-1.1.4.org/board/vlink/Makefile u-boot-1.1.4.tmp/board/vlink/Makefile
+--- u-boot-1.1.4.org/board/vlink/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.4.tmp/board/vlink/Makefile	2006-06-05 02:48:33.000000000 +0200
+@@ -0,0 +1,46 @@
++#
++# (C) Copyright 2003
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= lib$(BOARD).a
++
++OBJS	:= vlink.o at45.o flash.o
++
++$(LIB):	$(OBJS) $(SOBJS)
++	$(AR) crv $@ $(OBJS) $(SOBJS)
++
++clean:
++	rm -f $(SOBJS) $(OBJS)
++
++distclean:	clean
++	rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
++		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
++
++-include .depend
++
++#########################################################################
+diff -Naur u-boot-1.1.4.org/board/vlink/u-boot.lds u-boot-1.1.4.tmp/board/vlink/u-boot.lds
+--- u-boot-1.1.4.org/board/vlink/u-boot.lds	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.4.tmp/board/vlink/u-boot.lds	2005-12-16 17:39:27.000000000 +0100
+@@ -0,0 +1,57 @@
++/*
++ * (C) Copyright 2002
++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
++OUTPUT_ARCH(arm)
++ENTRY(_start)
++SECTIONS
++{
++	. = 0x00000000;
++
++	. = ALIGN(4);
++	.text      :
++	{
++	  cpu/arm920t/start.o	(.text)
++	  *(.text)
++	}
++
++	. = ALIGN(4);
++	.rodata : { *(.rodata) }
++
++	. = ALIGN(4);
++	.data : { *(.data) }
++
++	. = ALIGN(4);
++	.got : { *(.got) }
++
++	. = .;
++	__u_boot_cmd_start = .;
++	.u_boot_cmd : { *(.u_boot_cmd) }
++	__u_boot_cmd_end = .;
++
++	. = ALIGN(4);
++	__bss_start = .;
++	.bss : { *(.bss) }
++	_end = .;
++}
+diff -Naur u-boot-1.1.4.org/board/vlink/vlink.c u-boot-1.1.4.tmp/board/vlink/vlink.c
+--- u-boot-1.1.4.org/board/vlink/vlink.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.4.tmp/board/vlink/vlink.c	2006-06-05 03:10:22.000000000 +0200
+@@ -0,0 +1,89 @@
++/*
++ * (C) Copyright 2002
++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
++ * Marius Groeger <mgroeger@sysgo.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <asm/arch/AT91RM9200.h>
++#include <at91rm9200_net.h>
++#include <dm9161.h>
++#include <asm/mach-types.h>
++
++/* ------------------------------------------------------------------------- */
++/*
++ * Miscelaneous platform dependent initialisations
++ */
++
++int board_init (void)
++{
++	DECLARE_GLOBAL_DATA_PTR;
++
++	/* Enable Ctrlc */
++	console_init_f ();
++
++	/* Correct IRDA resistor problem */
++	/* Set PA23_TXD in Output */
++	(AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2;
++
++	/* memory and cpu-speed are setup before relocation */
++	/* so we do _nothing_ here */
++
++	/* arch number of Versalink-Board */
++	gd->bd->bi_arch_number = MACH_TYPE_VLINK;
++	/* adress of boot parameters */
++	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
++
++	return 0;
++}
++
++int dram_init (void)
++{
++	DECLARE_GLOBAL_DATA_PTR;
++
++	gd->bd->bi_dram[0].start = PHYS_SDRAM;
++	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
++	return 0;
++}
++
++#ifdef CONFIG_DRIVER_ETHER
++#if (CONFIG_COMMANDS & CFG_CMD_NET)
++
++/*
++ * Name:
++ *	at91rm9200_GetPhyInterface
++ * Description:
++ *	Initialise the interface functions to the PHY
++ * Arguments:
++ *	None
++ * Return value:
++ *	None
++ */
++void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
++{
++	p_phyops->Init = dm9161_InitPhy;
++	p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
++	p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
++	p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
++}
++
++#endif	/* CONFIG_COMMANDS & CFG_CMD_NET */
++#endif	/* CONFIG_DRIVER_ETHER */
+diff -Naur u-boot-1.1.4.org/include/asm-arm/mach-types.h u-boot-1.1.4.tmp/include/asm-arm/mach-types.h
+--- u-boot-1.1.4.org/include/asm-arm/mach-types.h	2005-12-16 17:39:27.000000000 +0100
++++ u-boot-1.1.4.tmp/include/asm-arm/mach-types.h	2006-06-05 01:29:25.000000000 +0200
+@@ -424,7 +424,7 @@
+ #define MACH_TYPE_MPORT3S              411
+ #define MACH_TYPE_RA_ALPHA             412
+ #define MACH_TYPE_XCEP                 413
+-#define MACH_TYPE_ARCOM_MERCURY        414
++#define MACH_TYPE_ARCOM_VULCAN         414
+ #define MACH_TYPE_STARGATE             415
+ #define MACH_TYPE_ARMADILLOJ           416
+ #define MACH_TYPE_ELROY_JACK           417
+@@ -457,7 +457,7 @@
+ #define MACH_TYPE_XM250                444
+ #define MACH_TYPE_T6TC1XB              445
+ #define MACH_TYPE_ESS710               446
+-#define MACH_TYPE_MX3ADS               447
++#define MACH_TYPE_MX31ADS              447
+ #define MACH_TYPE_HIMALAYA             448
+ #define MACH_TYPE_BOLFENK              449
+ #define MACH_TYPE_AT91RM9200KR         450
+@@ -563,8 +563,8 @@
+ #define MACH_TYPE_ENS_CMU              550
+ #define MACH_TYPE_MM6_SDB              551
+ #define MACH_TYPE_SATURN               552
+-#define MACH_TYPE_ARGONPLUSEVB         553
+-#define MACH_TYPE_SCMA11EVB            554
++#define MACH_TYPE_I30030EVB            553
++#define MACH_TYPE_MXC27530EVB          554
+ #define MACH_TYPE_SMDK2800             555
+ #define MACH_TYPE_MTWILSON             556
+ #define MACH_TYPE_ZITI                 557
+@@ -644,7 +644,7 @@
+ #define MACH_TYPE_MX2JAZZ              631
+ #define MACH_TYPE_MULTIIO              632
+ #define MACH_TYPE_HRDISPLAY            633
+-#define MACH_TYPE_SCMA11BB             634
++#define MACH_TYPE_MXC27530ADS          634
+ #define MACH_TYPE_TRIZEPS3             635
+ #define MACH_TYPE_ZEFEERDZA            636
+ #define MACH_TYPE_ZEFEERDZB            637
+@@ -718,7 +718,7 @@
+ #define MACH_TYPE_GEM                  707
+ #define MACH_TYPE_I858                 708
+ #define MACH_TYPE_HX2750               709
+-#define MACH_TYPE_ZEUSEVB              710
++#define MACH_TYPE_MXC91131EVB          710
+ #define MACH_TYPE_P700                 711
+ #define MACH_TYPE_CPE                  712
+ #define MACH_TYPE_SPITZ                713
+@@ -736,6 +736,331 @@
+ #define MACH_TYPE_LN2410SBC            725
+ #define MACH_TYPE_CB3RUFC              726
+ #define MACH_TYPE_MP2USB               727
++#define MACH_TYPE_NTNP425C             728
++#define MACH_TYPE_COLIBRI              729
++#define MACH_TYPE_PCM7220              730
++#define MACH_TYPE_GATEWAY7001          731
++#define MACH_TYPE_PCM027               732
++#define MACH_TYPE_CMPXA                733
++#define MACH_TYPE_ANUBIS               734
++#define MACH_TYPE_ITE8152              735
++#define MACH_TYPE_LPC3XXX              736
++#define MACH_TYPE_PUPPETEER            737
++#define MACH_TYPE_MACH_VADATECH        738
++#define MACH_TYPE_E570                 739
++#define MACH_TYPE_X50                  740
++#define MACH_TYPE_RECON                741
++#define MACH_TYPE_XBOARDGP8            742
++#define MACH_TYPE_FPIC2                743
++#define MACH_TYPE_AKITA                744
++#define MACH_TYPE_A81                  745
++#define MACH_TYPE_SVM_SC25X            746
++#define MACH_TYPE_VADATECH020          747
++#define MACH_TYPE_TLI                  748
++#define MACH_TYPE_EDB9315LC            749
++#define MACH_TYPE_PASSEC               750
++#define MACH_TYPE_DS_TIGER             751
++#define MACH_TYPE_E310                 752
++#define MACH_TYPE_E330                 753
++#define MACH_TYPE_RT3000               754
++#define MACH_TYPE_NOKIA770             755
++#define MACH_TYPE_PNX0106              756
++#define MACH_TYPE_HX21XX               757
++#define MACH_TYPE_FARADAY              758
++#define MACH_TYPE_SBC9312              759
++#define MACH_TYPE_BATMAN               760
++#define MACH_TYPE_JPD201               761
++#define MACH_TYPE_MIPSA                762
++#define MACH_TYPE_KACOM                763
++#define MACH_TYPE_SWARCOCPU            764
++#define MACH_TYPE_SWARCODSL            765
++#define MACH_TYPE_BLUEANGEL            766
++#define MACH_TYPE_HAIRYGRAMA           767
++#define MACH_TYPE_BANFF                768
++#define MACH_TYPE_CARMEVA              769
++#define MACH_TYPE_SAM255               770
++#define MACH_TYPE_PPM10                771
++#define MACH_TYPE_EDB9315A             772
++#define MACH_TYPE_SUNSET               773
++#define MACH_TYPE_STARGATE2            774
++#define MACH_TYPE_INTELMOTE2           775
++#define MACH_TYPE_TRIZEPS4             776
++#define MACH_TYPE_MAINSTONE2           777
++#define MACH_TYPE_EZ_IXP42X            778
++#define MACH_TYPE_TAPWAVE_ZODIAC       779
++#define MACH_TYPE_UNIVERSALMETER       780
++#define MACH_TYPE_HICOARM9             781
++#define MACH_TYPE_PNX4008              782
++#define MACH_TYPE_KWS6000              783
++#define MACH_TYPE_PORTUX920T           784
++#define MACH_TYPE_EZ_X5                785
++#define MACH_TYPE_OMAP_RUDOLPH         786
++#define MACH_TYPE_CPUAT91              787
++#define MACH_TYPE_REA9200              788
++#define MACH_TYPE_ACTS_PUNE_SA1110     789
++#define MACH_TYPE_IXP425               790
++#define MACH_TYPE_I30030ADS            791
++#define MACH_TYPE_PERCH                792
++#define MACH_TYPE_EIS05R1              793
++#define MACH_TYPE_PEPPERPAD            794
++#define MACH_TYPE_SB3010               795
++#define MACH_TYPE_RM9200               796
++#define MACH_TYPE_DMA03                797
++#define MACH_TYPE_ROAD_S101            798
++#define MACH_TYPE_IQ_NEXTGEN_A         799
++#define MACH_TYPE_IQ_NEXTGEN_B         800
++#define MACH_TYPE_IQ_NEXTGEN_C         801
++#define MACH_TYPE_IQ_NEXTGEN_D         802
++#define MACH_TYPE_IQ_NEXTGEN_E         803
++#define MACH_TYPE_MALLOW_AT91          804
++#define MACH_TYPE_CYBERTRACKER_I       805
++#define MACH_TYPE_GESBC931X            806
++#define MACH_TYPE_CENTIPAD             807
++#define MACH_TYPE_ARMSOC               808
++#define MACH_TYPE_SE4200               809
++#define MACH_TYPE_EMS197A              810
++#define MACH_TYPE_MICRO9               811
++#define MACH_TYPE_MICRO9L              812
++#define MACH_TYPE_UC5471DSP            813
++#define MACH_TYPE_SJ5471ENG            814
++#define MACH_TYPE_CMPXA26X             815
++#define MACH_TYPE_NC                   816
++#define MACH_TYPE_OMAP_PALMTE          817
++#define MACH_TYPE_AJAX52X              818
++#define MACH_TYPE_SIRIUSTAR            819
++#define MACH_TYPE_IODATA_HDLG          820
++#define MACH_TYPE_AT91RM9200UTL        821
++#define MACH_TYPE_BIOSAFE              822
++#define MACH_TYPE_MP1000               823
++#define MACH_TYPE_PARSY                824
++#define MACH_TYPE_CCXP                 825
++#define MACH_TYPE_OMAP_GSAMPLE         826
++#define MACH_TYPE_REALVIEW_EB          827
++#define MACH_TYPE_SAMOA                828
++#define MACH_TYPE_T3XSCALE             829
++#define MACH_TYPE_I878                 830
++#define MACH_TYPE_BORZOI               831
++#define MACH_TYPE_GECKO                832
++#define MACH_TYPE_DS101                833
++#define MACH_TYPE_OMAP_PALMTT2         834
++#define MACH_TYPE_XSCALE_PALMLD        835
++#define MACH_TYPE_CC9C                 836
++#define MACH_TYPE_SBC1670              837
++#define MACH_TYPE_IXDP28X5             838
++#define MACH_TYPE_OMAP_PALMTT          839
++#define MACH_TYPE_ML696K               840
++#define MACH_TYPE_ARCOM_ZEUS           841
++#define MACH_TYPE_OSIRIS               842
++#define MACH_TYPE_MAESTRO              843
++#define MACH_TYPE_TUNGE2               844
++#define MACH_TYPE_IXBBM                845
++#define MACH_TYPE_MX27                 846
++#define MACH_TYPE_AX8004               847
++#define MACH_TYPE_AT91SAM9261EK        848
++#define MACH_TYPE_LOFT                 849
++#define MACH_TYPE_MAGPIE               850
++#define MACH_TYPE_MX21                 851
++#define MACH_TYPE_MB87M3400            852
++#define MACH_TYPE_MGUARD_DELTA         853
++#define MACH_TYPE_DAVINCI_DVDP         854
++#define MACH_TYPE_HTCUNIVERSAL         855
++#define MACH_TYPE_TPAD                 856
++#define MACH_TYPE_ROVERP3              857
++#define MACH_TYPE_JORNADA928           858
++#define MACH_TYPE_MV88FXX81            859
++#define MACH_TYPE_STMP36XX             860
++#define MACH_TYPE_SXNI79524            861
++#define MACH_TYPE_AMS_DELTA            862
++#define MACH_TYPE_URANIUM              863
++#define MACH_TYPE_UCON                 864
++#define MACH_TYPE_NAS100D              865
++#define MACH_TYPE_L083_1000            866
++#define MACH_TYPE_EZX                  867
++#define MACH_TYPE_PNX5220              868
++#define MACH_TYPE_BUTTE                869
++#define MACH_TYPE_SRM2                 870
++#define MACH_TYPE_DSBR                 871
++#define MACH_TYPE_CRYSTALBALL          872
++#define MACH_TYPE_TINYPXA27X           873
++#define MACH_TYPE_HERBIE               874
++#define MACH_TYPE_MAGICIAN             875
++#define MACH_TYPE_CM4002               876
++#define MACH_TYPE_B4                   877
++#define MACH_TYPE_MAUI                 878
++#define MACH_TYPE_CYBERTRACKER_G       879
++#define MACH_TYPE_NXDKN                880
++#define MACH_TYPE_MIO8390              881
++#define MACH_TYPE_OMI_BOARD            882
++#define MACH_TYPE_MX21CIV              883
++#define MACH_TYPE_MAHI_CDAC            884
++#define MACH_TYPE_XSCALE_PALMTX        885
++#define MACH_TYPE_S3C2413              887
++#define MACH_TYPE_SAMSYS_EP0           888
++#define MACH_TYPE_WG302V1              889
++#define MACH_TYPE_WG302V2              890
++#define MACH_TYPE_EB42X                891
++#define MACH_TYPE_IQ331ES              892
++#define MACH_TYPE_COSYDSP              893
++#define MACH_TYPE_UPLAT7D              894
++#define MACH_TYPE_PTDAVINCI            895
++#define MACH_TYPE_MBUS                 896
++#define MACH_TYPE_NADIA2VB             897
++#define MACH_TYPE_R1000                898
++#define MACH_TYPE_HW90250              899
++#define MACH_TYPE_OMAP_2430SDP         900
++#define MACH_TYPE_DAVINCI_EVM          901
++#define MACH_TYPE_OMAP_TORNADO         902
++#define MACH_TYPE_OLOCREEK             903
++#define MACH_TYPE_PALMZ72              904
++#define MACH_TYPE_NXDB500              905
++#define MACH_TYPE_APF9328              906
++#define MACH_TYPE_OMAP_WIPOQ           907
++#define MACH_TYPE_OMAP_TWIP            908
++#define MACH_TYPE_XSCALE_PALMTREO650   909
++#define MACH_TYPE_ACUMEN               910
++#define MACH_TYPE_XP100                911
++#define MACH_TYPE_FS2410               912
++#define MACH_TYPE_PXA270_CERF          913
++#define MACH_TYPE_SQ2FTLPALM           914
++#define MACH_TYPE_BSEMSERVER           915
++#define MACH_TYPE_NETCLIENT            916
++#define MACH_TYPE_XSCALE_PALMTT5       917
++#define MACH_TYPE_OMAP_PALMTC          918
++#define MACH_TYPE_OMAP_APOLLON         919
++#define MACH_TYPE_MXC30030EVB          920
++#define MACH_TYPE_REA_2D               921
++#define MACH_TYPE_TI3E524              922
++#define MACH_TYPE_ATEB9200             923
++#define MACH_TYPE_AUCKLAND             924
++#define MACH_TYPE_AK3320M              925
++#define MACH_TYPE_DURAMAX              926
++#define MACH_TYPE_N35                  927
++#define MACH_TYPE_PRONGHORN            928
++#define MACH_TYPE_FUNDY                929
++#define MACH_TYPE_LOGICPD_PXA270       930
++#define MACH_TYPE_CPU777               931
++#define MACH_TYPE_SIMICON9201          932
++#define MACH_TYPE_LEAP2_HPM            933
++#define MACH_TYPE_CM922TXA10           934
++#define MACH_TYPE_PXA                  935
++#define MACH_TYPE_SANDGATE2            936
++#define MACH_TYPE_SANDGATE2G           937
++#define MACH_TYPE_SANDGATE2P           938
++#define MACH_TYPE_FRED_JACK            939
++#define MACH_TYPE_TTG_COLOR1           940
++#define MACH_TYPE_NXEB500HMI           941
++#define MACH_TYPE_NETDCU8              942
++#define MACH_TYPE_ML675050_CPU_BOA     943
++#define MACH_TYPE_NG_FVX538            944
++#define MACH_TYPE_NG_FVS338            945
++#define MACH_TYPE_PNX4103              946
++#define MACH_TYPE_HESDB                947
++#define MACH_TYPE_XSILO                948
++#define MACH_TYPE_ESPRESSO             949
++#define MACH_TYPE_EMLC                 950
++#define MACH_TYPE_SISTERON             951
++#define MACH_TYPE_RX1950               952
++#define MACH_TYPE_TSC_VENUS            953
++#define MACH_TYPE_DS101J               954
++#define MACH_TYPE_MXC30030ADS          955
++#define MACH_TYPE_FUJITSU_WIMAXSOC     956
++#define MACH_TYPE_DUALPCMODEM          957
++#define MACH_TYPE_GESBC9312            958
++#define MACH_TYPE_HTCAPACHE            959
++#define MACH_TYPE_IXDP435              960
++#define MACH_TYPE_CATPROVT100          961
++#define MACH_TYPE_PICOTUX1XX           962
++#define MACH_TYPE_PICOTUX2XX           963
++#define MACH_TYPE_DSMG600              964
++#define MACH_TYPE_EMPC2                965
++#define MACH_TYPE_VENTURA              966
++#define MACH_TYPE_PHIDGET_SBC          967
++#define MACH_TYPE_IJ3K                 968
++#define MACH_TYPE_PISGAH               969
++#define MACH_TYPE_OMAP_FSAMPLE         970
++#define MACH_TYPE_SG720                971
++#define MACH_TYPE_REDFOX               972
++#define MACH_TYPE_MYSH_EP9315_1        973
++#define MACH_TYPE_TPF106               974
++#define MACH_TYPE_AT91RM9200KG         975
++#define MACH_TYPE_SLEDB                976
++#define MACH_TYPE_ONTRACK              977
++#define MACH_TYPE_PM1200               978
++#define MACH_TYPE_ESS24XXX             979
++#define MACH_TYPE_COREMP7              980
++#define MACH_TYPE_NEXCODER_6446        981
++#define MACH_TYPE_STVC8380             982
++#define MACH_TYPE_TEKLYNX              983
++#define MACH_TYPE_CARBONADO            984
++#define MACH_TYPE_SYSMOS_MP730         985
++#define MACH_TYPE_SNAPPER_CL15         986
++#define MACH_TYPE_PGIGIM               987
++#define MACH_TYPE_PTX9160P2            988
++#define MACH_TYPE_DCORE1               989
++#define MACH_TYPE_VICTORPXA            990
++#define MACH_TYPE_MX2DTB               991
++#define MACH_TYPE_PXA_IREX_ER0100      992
++#define MACH_TYPE_OMAP_PALMZ71         993
++#define MACH_TYPE_BARTEC_DEG           994
++#define MACH_TYPE_HW50251              995
++#define MACH_TYPE_IBOX                 996
++#define MACH_TYPE_ATLASLH7A404         997
++#define MACH_TYPE_PT2026               998
++#define MACH_TYPE_HTCALPINE            999
++#define MACH_TYPE_BARTEC_VTU           1000
++#define MACH_TYPE_VCOREII              1001
++#define MACH_TYPE_PDNB3                1002
++#define MACH_TYPE_HTCBEETLES           1003
++#define MACH_TYPE_S3C6400              1004
++#define MACH_TYPE_S3C2443              1005
++#define MACH_TYPE_OMAP_LDK             1006
++#define MACH_TYPE_SMDK2460             1007
++#define MACH_TYPE_SMDK2440             1008
++#define MACH_TYPE_SMDK2412             1009
++#define MACH_TYPE_WEBBOX               1010
++#define MACH_TYPE_CWWNDP               1011
++#define MACH_TYPE_DRAGON               1012
++#define MACH_TYPE_OPENDO_CPU_BOARD     1013
++#define MACH_TYPE_CCM2200              1014
++#define MACH_TYPE_ETWARM               1015
++#define MACH_TYPE_M93030               1016
++#define MACH_TYPE_CC7U                 1017
++#define MACH_TYPE_MTT_RANGER           1018
++#define MACH_TYPE_NEXUS                1019
++#define MACH_TYPE_DESMAN               1020
++#define MACH_TYPE_BKDE303              1021
++#define MACH_TYPE_SMDK2413             1022
++#define MACH_TYPE_AML_M7200            1023
++#define MACH_TYPE_AML_M5900            1024
++#define MACH_TYPE_SG640                1025
++#define MACH_TYPE_EDG79524             1026
++#define MACH_TYPE_AI2410               1027
++#define MACH_TYPE_IXP465               1028
++#define MACH_TYPE_BALLOON3             1029
++#define MACH_TYPE_HEINS                1030
++#define MACH_TYPE_MPLUSEVA             1031
++#define MACH_TYPE_RT042                1032
++#define MACH_TYPE_CWIEM                1033
++#define MACH_TYPE_CM_X270              1034
++#define MACH_TYPE_CM_X255              1035
++#define MACH_TYPE_ESH_AT91             1036
++#define MACH_TYPE_SANDGATE3            1037
++#define MACH_TYPE_PRIMO                1038
++#define MACH_TYPE_GEMSTONE             1039
++#define MACH_TYPE_PRONGHORNMETRO       1040
++#define MACH_TYPE_SIDEWINDER           1041
++#define MACH_TYPE_PICOMOD1             1042
++#define MACH_TYPE_SG590                1043
++#define MACH_TYPE_AKAI9307             1044
++#define MACH_TYPE_FONTAINE             1045
++#define MACH_TYPE_WOMBAT               1046
++#define MACH_TYPE_ACQ300               1047
++#define MACH_TYPE_MOD_270              1048
++#define MACH_TYPE_VC0820               1049
++#define MACH_TYPE_ANI_AIM              1050
++#define MACH_TYPE_JELLYFISH            1051
++#define MACH_TYPE_AMANITA              1052
++#define MACH_TYPE_VLINK                1053
+ 
+ #ifdef CONFIG_ARCH_EBSA110
+ # ifdef machine_arch_type
+@@ -3540,9 +3865,9 @@
+ # else
+ #  define machine_arch_type	MACH_TYPE_RAMSES
+ # endif
+-# define machine_is_ramses()	(machine_arch_type == MACH_TYPE_RAMSES)
++# define machine_is_mnci()	(machine_arch_type == MACH_TYPE_RAMSES)
+ #else
+-# define machine_is_ramses()	(0)
++# define machine_is_mnci()	(0)
+ #endif
+ 
+ #ifdef CONFIG_ARCH_S28X
+@@ -4500,9 +4825,9 @@
+ # else
+ #  define machine_arch_type	MACH_TYPE_M825XX
+ # endif
+-# define machine_is_m825xx()	(machine_arch_type == MACH_TYPE_M825XX)
++# define machine_is_comcerto()	(machine_arch_type == MACH_TYPE_M825XX)
+ #else
+-# define machine_is_m825xx()	(0)
++# define machine_is_comcerto()	(0)
+ #endif
+ 
+ #ifdef CONFIG_SA1100_M7100
+@@ -5657,16 +5982,16 @@
+ # define machine_is_xcep()	(0)
+ #endif
+ 
+-#ifdef CONFIG_MACH_ARCOM_MERCURY
++#ifdef CONFIG_MACH_ARCOM_VULCAN
+ # ifdef machine_arch_type
+ #  undef machine_arch_type
+ #  define machine_arch_type	__machine_arch_type
+ # else
+-#  define machine_arch_type	MACH_TYPE_ARCOM_MERCURY
++#  define machine_arch_type	MACH_TYPE_ARCOM_VULCAN
+ # endif
+-# define machine_is_arcom_mercury()	(machine_arch_type == MACH_TYPE_ARCOM_MERCURY)
++# define machine_is_arcom_vulcan()	(machine_arch_type == MACH_TYPE_ARCOM_VULCAN)
+ #else
+-# define machine_is_arcom_mercury()	(0)
++# define machine_is_arcom_vulcan()	(0)
+ #endif
+ 
+ #ifdef CONFIG_MACH_STARGATE
+@@ -6053,16 +6378,16 @@
+ # define machine_is_ess710()	(0)
+ #endif
+ 
+-#ifdef CONFIG_MACH_MX3ADS
++#ifdef CONFIG_MACH_MX31ADS
+ # ifdef machine_arch_type
+ #  undef machine_arch_type
+ #  define machine_arch_type	__machine_arch_type
+ # else
+-#  define machine_arch_type	MACH_TYPE_MX3ADS
++#  define machine_arch_type	MACH_TYPE_MX31ADS
+ # endif
+-# define machine_is_mx3ads()	(machine_arch_type == MACH_TYPE_MX3ADS)
++# define machine_is_mx31ads()	(machine_arch_type == MACH_TYPE_MX31ADS)
+ #else
+-# define machine_is_mx3ads()	(0)
++# define machine_is_mx31ads()	(0)
+ #endif
+ 
+ #ifdef CONFIG_MACH_HIMALAYA
+@@ -7325,28 +7650,28 @@
+ # define machine_is_saturn()	(0)
+ #endif
+ 
+-#ifdef CONFIG_MACH_ARGONPLUSEVB
++#ifdef CONFIG_MACH_I30030EVB
+ # ifdef machine_arch_type
+ #  undef machine_arch_type
+ #  define machine_arch_type	__machine_arch_type
+ # else
+-#  define machine_arch_type	MACH_TYPE_ARGONPLUSEVB
++#  define machine_arch_type	MACH_TYPE_I30030EVB
+ # endif
+-# define machine_is_argonplusevb()	(machine_arch_type == MACH_TYPE_ARGONPLUSEVB)
++# define machine_is_i30030evb()	(machine_arch_type == MACH_TYPE_I30030EVB)
+ #else
+-# define machine_is_argonplusevb()	(0)
++# define machine_is_i30030evb()	(0)
+ #endif
+ 
+-#ifdef CONFIG_MACH_SCMA11EVB
++#ifdef CONFIG_MACH_MXC27530EVB
+ # ifdef machine_arch_type
+ #  undef machine_arch_type
+ #  define machine_arch_type	__machine_arch_type
+ # else
+-#  define machine_arch_type	MACH_TYPE_SCMA11EVB
++#  define machine_arch_type	MACH_TYPE_MXC27530EVB
+ # endif
+-# define machine_is_scma11evb()	(machine_arch_type == MACH_TYPE_SCMA11EVB)
++# define machine_is_mxc27530evb()	(machine_arch_type == MACH_TYPE_MXC27530EVB)
+ #else
+-# define machine_is_scma11evb()	(0)
++# define machine_is_mxc27530evb()	(0)
+ #endif
+ 
+ #ifdef CONFIG_MACH_SMDK2800
+@@ -8297,16 +8622,16 @@
+ # define machine_is_hrdisplay()	(0)
+ #endif
+ 
+-#ifdef CONFIG_MACH_SCMA11BB
++#ifdef CONFIG_MACH_MXC27530ADS
+ # ifdef machine_arch_type
+ #  undef machine_arch_type
+ #  define machine_arch_type	__machine_arch_type
+ # else
+-#  define machine_arch_type	MACH_TYPE_SCMA11BB
++#  define machine_arch_type	MACH_TYPE_MXC27530ADS
+ # endif
+-# define machine_is_scma11bb()	(machine_arch_type == MACH_TYPE_SCMA11BB)
++# define machine_is_mxc27530ads()	(machine_arch_type == MACH_TYPE_MXC27530ADS)
+ #else
+-# define machine_is_scma11bb()	(0)
++# define machine_is_mxc27530ads()	(0)
+ #endif
+ 
+ #ifdef CONFIG_MACH_TRIZEPS3
+@@ -9185,16 +9510,16 @@
+ # define machine_is_hx2750()	(0)
+ #endif
+ 
+-#ifdef CONFIG_MACH_ZEUSEVB
++#ifdef CONFIG_MACH_MXC91131EVB
+ # ifdef machine_arch_type
+ #  undef machine_arch_type
+ #  define machine_arch_type	__machine_arch_type
+ # else
+-#  define machine_arch_type	MACH_TYPE_ZEUSEVB
++#  define machine_arch_type	MACH_TYPE_MXC91131EVB
+ # endif
+-# define machine_is_zeusevb()	(machine_arch_type == MACH_TYPE_ZEUSEVB)
++# define machine_is_mxc91131evb()	(machine_arch_type == MACH_TYPE_MXC91131EVB)
+ #else
+-# define machine_is_zeusevb()	(0)
++# define machine_is_mxc91131evb()	(0)
+ #endif
+ 
+ #ifdef CONFIG_MACH_P700
+@@ -9401,6 +9726,3906 @@
+ # define machine_is_mp2usb()	(0)
+ #endif
+ 
++#ifdef CONFIG_MACH_NTNP425C
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NTNP425C
++# endif
++# define machine_is_ntnp425c()	(machine_arch_type == MACH_TYPE_NTNP425C)
++#else
++# define machine_is_ntnp425c()	(0)
++#endif
++
++#ifdef CONFIG_MACH_COLIBRI
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_COLIBRI
++# endif
++# define machine_is_colibri()	(machine_arch_type == MACH_TYPE_COLIBRI)
++#else
++# define machine_is_colibri()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PCM7220
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PCM7220
++# endif
++# define machine_is_pcm7220()	(machine_arch_type == MACH_TYPE_PCM7220)
++#else
++# define machine_is_pcm7220()	(0)
++#endif
++
++#ifdef CONFIG_MACH_GATEWAY7001
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_GATEWAY7001
++# endif
++# define machine_is_gateway7001()	(machine_arch_type == MACH_TYPE_GATEWAY7001)
++#else
++# define machine_is_gateway7001()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PCM027
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PCM027
++# endif
++# define machine_is_pcm027()	(machine_arch_type == MACH_TYPE_PCM027)
++#else
++# define machine_is_pcm027()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CMPXA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CMPXA
++# endif
++# define machine_is_cmpxa()	(machine_arch_type == MACH_TYPE_CMPXA)
++#else
++# define machine_is_cmpxa()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ANUBIS
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ANUBIS
++# endif
++# define machine_is_anubis()	(machine_arch_type == MACH_TYPE_ANUBIS)
++#else
++# define machine_is_anubis()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ITE8152
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ITE8152
++# endif
++# define machine_is_ite8152()	(machine_arch_type == MACH_TYPE_ITE8152)
++#else
++# define machine_is_ite8152()	(0)
++#endif
++
++#ifdef CONFIG_MACH_LPC3XXX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_LPC3XXX
++# endif
++# define machine_is_lpc3xxx()	(machine_arch_type == MACH_TYPE_LPC3XXX)
++#else
++# define machine_is_lpc3xxx()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PUPPETEER
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PUPPETEER
++# endif
++# define machine_is_puppeteer()	(machine_arch_type == MACH_TYPE_PUPPETEER)
++#else
++# define machine_is_puppeteer()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MACH_VADATECH
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MACH_VADATECH
++# endif
++# define machine_is_vt001()	(machine_arch_type == MACH_TYPE_MACH_VADATECH)
++#else
++# define machine_is_vt001()	(0)
++#endif
++
++#ifdef CONFIG_MACH_E570
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_E570
++# endif
++# define machine_is_e570()	(machine_arch_type == MACH_TYPE_E570)
++#else
++# define machine_is_e570()	(0)
++#endif
++
++#ifdef CONFIG_MACH_X50
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_X50
++# endif
++# define machine_is_x50()	(machine_arch_type == MACH_TYPE_X50)
++#else
++# define machine_is_x50()	(0)
++#endif
++
++#ifdef CONFIG_MACH_RECON
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_RECON
++# endif
++# define machine_is_recon()	(machine_arch_type == MACH_TYPE_RECON)
++#else
++# define machine_is_recon()	(0)
++#endif
++
++#ifdef CONFIG_MACH_XBOARDGP8
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_XBOARDGP8
++# endif
++# define machine_is_xboardgp8()	(machine_arch_type == MACH_TYPE_XBOARDGP8)
++#else
++# define machine_is_xboardgp8()	(0)
++#endif
++
++#ifdef CONFIG_MACH_FPIC2
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_FPIC2
++# endif
++# define machine_is_fpic2()	(machine_arch_type == MACH_TYPE_FPIC2)
++#else
++# define machine_is_fpic2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AKITA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AKITA
++# endif
++# define machine_is_akita()	(machine_arch_type == MACH_TYPE_AKITA)
++#else
++# define machine_is_akita()	(0)
++#endif
++
++#ifdef CONFIG_MACH_A81
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_A81
++# endif
++# define machine_is_a81()	(machine_arch_type == MACH_TYPE_A81)
++#else
++# define machine_is_a81()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SVM_SC25X
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SVM_SC25X
++# endif
++# define machine_is_svm_sc25x()	(machine_arch_type == MACH_TYPE_SVM_SC25X)
++#else
++# define machine_is_svm_sc25x()	(0)
++#endif
++
++#ifdef CONFIG_MACH_VADATECH020
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_VADATECH020
++# endif
++# define machine_is_vt020()	(machine_arch_type == MACH_TYPE_VADATECH020)
++#else
++# define machine_is_vt020()	(0)
++#endif
++
++#ifdef CONFIG_MACH_TLI
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_TLI
++# endif
++# define machine_is_tli()	(machine_arch_type == MACH_TYPE_TLI)
++#else
++# define machine_is_tli()	(0)
++#endif
++
++#ifdef CONFIG_MACH_EDB9315LC
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_EDB9315LC
++# endif
++# define machine_is_edb9315lc()	(machine_arch_type == MACH_TYPE_EDB9315LC)
++#else
++# define machine_is_edb9315lc()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PASSEC
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PASSEC
++# endif
++# define machine_is_passec()	(machine_arch_type == MACH_TYPE_PASSEC)
++#else
++# define machine_is_passec()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DS_TIGER
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DS_TIGER
++# endif
++# define machine_is_ds_tiger()	(machine_arch_type == MACH_TYPE_DS_TIGER)
++#else
++# define machine_is_ds_tiger()	(0)
++#endif
++
++#ifdef CONFIG_MACH_E310
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_E310
++# endif
++# define machine_is_e310()	(machine_arch_type == MACH_TYPE_E310)
++#else
++# define machine_is_e310()	(0)
++#endif
++
++#ifdef CONFIG_MACH_E330
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_E330
++# endif
++# define machine_is_e330()	(machine_arch_type == MACH_TYPE_E330)
++#else
++# define machine_is_e330()	(0)
++#endif
++
++#ifdef CONFIG_MACH_RT3000
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_RT3000
++# endif
++# define machine_is_rt3000()	(machine_arch_type == MACH_TYPE_RT3000)
++#else
++# define machine_is_rt3000()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NOKIA770
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NOKIA770
++# endif
++# define machine_is_nokia770()	(machine_arch_type == MACH_TYPE_NOKIA770)
++#else
++# define machine_is_nokia770()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PNX0106
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PNX0106
++# endif
++# define machine_is_pnx0106()	(machine_arch_type == MACH_TYPE_PNX0106)
++#else
++# define machine_is_pnx0106()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HX21XX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HX21XX
++# endif
++# define machine_is_hx21xx()	(machine_arch_type == MACH_TYPE_HX21XX)
++#else
++# define machine_is_hx21xx()	(0)
++#endif
++
++#ifdef CONFIG_MACH_FARADAY
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_FARADAY
++# endif
++# define machine_is_faraday()	(machine_arch_type == MACH_TYPE_FARADAY)
++#else
++# define machine_is_faraday()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SBC9312
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SBC9312
++# endif
++# define machine_is_sbc9312()	(machine_arch_type == MACH_TYPE_SBC9312)
++#else
++# define machine_is_sbc9312()	(0)
++#endif
++
++#ifdef CONFIG_MACH_BATMAN
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_BATMAN
++# endif
++# define machine_is_batman()	(machine_arch_type == MACH_TYPE_BATMAN)
++#else
++# define machine_is_batman()	(0)
++#endif
++
++#ifdef CONFIG_MACH_JPD201
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_JPD201
++# endif
++# define machine_is_jpd201()	(machine_arch_type == MACH_TYPE_JPD201)
++#else
++# define machine_is_jpd201()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MIPSA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MIPSA
++# endif
++# define machine_is_mipsa()	(machine_arch_type == MACH_TYPE_MIPSA)
++#else
++# define machine_is_mipsa()	(0)
++#endif
++
++#ifdef CONFIG_MACH_KACOM
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_KACOM
++# endif
++# define machine_is_kacom()	(machine_arch_type == MACH_TYPE_KACOM)
++#else
++# define machine_is_kacom()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SWARCOCPU
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SWARCOCPU
++# endif
++# define machine_is_swarcocpu()	(machine_arch_type == MACH_TYPE_SWARCOCPU)
++#else
++# define machine_is_swarcocpu()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SWARCODSL
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SWARCODSL
++# endif
++# define machine_is_swarcodsl()	(machine_arch_type == MACH_TYPE_SWARCODSL)
++#else
++# define machine_is_swarcodsl()	(0)
++#endif
++
++#ifdef CONFIG_MACH_BLUEANGEL
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_BLUEANGEL
++# endif
++# define machine_is_blueangel()	(machine_arch_type == MACH_TYPE_BLUEANGEL)
++#else
++# define machine_is_blueangel()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HAIRYGRAMA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HAIRYGRAMA
++# endif
++# define machine_is_hairygrama()	(machine_arch_type == MACH_TYPE_HAIRYGRAMA)
++#else
++# define machine_is_hairygrama()	(0)
++#endif
++
++#ifdef CONFIG_MACH_BANFF
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_BANFF
++# endif
++# define machine_is_banff()	(machine_arch_type == MACH_TYPE_BANFF)
++#else
++# define machine_is_banff()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CARMEVA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CARMEVA
++# endif
++# define machine_is_carmeva()	(machine_arch_type == MACH_TYPE_CARMEVA)
++#else
++# define machine_is_carmeva()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SAM255
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SAM255
++# endif
++# define machine_is_sam255()	(machine_arch_type == MACH_TYPE_SAM255)
++#else
++# define machine_is_sam255()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PPM10
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PPM10
++# endif
++# define machine_is_ppm10()	(machine_arch_type == MACH_TYPE_PPM10)
++#else
++# define machine_is_ppm10()	(0)
++#endif
++
++#ifdef CONFIG_MACH_EDB9315A
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_EDB9315A
++# endif
++# define machine_is_edb9315a()	(machine_arch_type == MACH_TYPE_EDB9315A)
++#else
++# define machine_is_edb9315a()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SUNSET
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SUNSET
++# endif
++# define machine_is_sunset()	(machine_arch_type == MACH_TYPE_SUNSET)
++#else
++# define machine_is_sunset()	(0)
++#endif
++
++#ifdef CONFIG_MACH_STARGATE2
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_STARGATE2
++# endif
++# define machine_is_stargate2()	(machine_arch_type == MACH_TYPE_STARGATE2)
++#else
++# define machine_is_stargate2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_INTELMOTE2
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_INTELMOTE2
++# endif
++# define machine_is_intelmote2()	(machine_arch_type == MACH_TYPE_INTELMOTE2)
++#else
++# define machine_is_intelmote2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_TRIZEPS4
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_TRIZEPS4
++# endif
++# define machine_is_trizeps4()	(machine_arch_type == MACH_TYPE_TRIZEPS4)
++#else
++# define machine_is_trizeps4()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MAINSTONE2
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MAINSTONE2
++# endif
++# define machine_is_mainstone2()	(machine_arch_type == MACH_TYPE_MAINSTONE2)
++#else
++# define machine_is_mainstone2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_EZ_IXP42X
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_EZ_IXP42X
++# endif
++# define machine_is_ez_ixp42x()	(machine_arch_type == MACH_TYPE_EZ_IXP42X)
++#else
++# define machine_is_ez_ixp42x()	(0)
++#endif
++
++#ifdef CONFIG_MACH_TAPWAVE_ZODIAC
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_TAPWAVE_ZODIAC
++# endif
++# define machine_is_tapwave_zodiac()	(machine_arch_type == MACH_TYPE_TAPWAVE_ZODIAC)
++#else
++# define machine_is_tapwave_zodiac()	(0)
++#endif
++
++#ifdef CONFIG_MACH_UNIVERSALMETER
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_UNIVERSALMETER
++# endif
++# define machine_is_universalmeter()	(machine_arch_type == MACH_TYPE_UNIVERSALMETER)
++#else
++# define machine_is_universalmeter()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HICOARM9
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HICOARM9
++# endif
++# define machine_is_hicoarm9()	(machine_arch_type == MACH_TYPE_HICOARM9)
++#else
++# define machine_is_hicoarm9()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PNX4008
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PNX4008
++# endif
++# define machine_is_pnx4008()	(machine_arch_type == MACH_TYPE_PNX4008)
++#else
++# define machine_is_pnx4008()	(0)
++#endif
++
++#ifdef CONFIG_MACH_KWS6000
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_KWS6000
++# endif
++# define machine_is_kws6000()	(machine_arch_type == MACH_TYPE_KWS6000)
++#else
++# define machine_is_kws6000()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PORTUX920T
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PORTUX920T
++# endif
++# define machine_is_portux920t()	(machine_arch_type == MACH_TYPE_PORTUX920T)
++#else
++# define machine_is_portux920t()	(0)
++#endif
++
++#ifdef CONFIG_MACH_EZ_X5
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_EZ_X5
++# endif
++# define machine_is_ez_x5()	(machine_arch_type == MACH_TYPE_EZ_X5)
++#else
++# define machine_is_ez_x5()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_RUDOLPH
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_RUDOLPH
++# endif
++# define machine_is_omap_rudolph()	(machine_arch_type == MACH_TYPE_OMAP_RUDOLPH)
++#else
++# define machine_is_omap_rudolph()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CPUAT91
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CPUAT91
++# endif
++# define machine_is_cpuat91()	(machine_arch_type == MACH_TYPE_CPUAT91)
++#else
++# define machine_is_cpuat91()	(0)
++#endif
++
++#ifdef CONFIG_MACH_REA9200
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_REA9200
++# endif
++# define machine_is_rea9200()	(machine_arch_type == MACH_TYPE_REA9200)
++#else
++# define machine_is_rea9200()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ACTS_PUNE_SA1110
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ACTS_PUNE_SA1110
++# endif
++# define machine_is_acts_pune_sa1110()	(machine_arch_type == MACH_TYPE_ACTS_PUNE_SA1110)
++#else
++# define machine_is_acts_pune_sa1110()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IXP425
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IXP425
++# endif
++# define machine_is_ixp425()	(machine_arch_type == MACH_TYPE_IXP425)
++#else
++# define machine_is_ixp425()	(0)
++#endif
++
++#ifdef CONFIG_MACH_I30030ADS
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_I30030ADS
++# endif
++# define machine_is_i30030ads()	(machine_arch_type == MACH_TYPE_I30030ADS)
++#else
++# define machine_is_i30030ads()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PERCH
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PERCH
++# endif
++# define machine_is_perch()	(machine_arch_type == MACH_TYPE_PERCH)
++#else
++# define machine_is_perch()	(0)
++#endif
++
++#ifdef CONFIG_MACH_EIS05R1
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_EIS05R1
++# endif
++# define machine_is_eis05r1()	(machine_arch_type == MACH_TYPE_EIS05R1)
++#else
++# define machine_is_eis05r1()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PEPPERPAD
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PEPPERPAD
++# endif
++# define machine_is_pepperpad()	(machine_arch_type == MACH_TYPE_PEPPERPAD)
++#else
++# define machine_is_pepperpad()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SB3010
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SB3010
++# endif
++# define machine_is_sb3010()	(machine_arch_type == MACH_TYPE_SB3010)
++#else
++# define machine_is_sb3010()	(0)
++#endif
++
++#ifdef CONFIG_MACH_RM9200
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_RM9200
++# endif
++# define machine_is_rm9200()	(machine_arch_type == MACH_TYPE_RM9200)
++#else
++# define machine_is_rm9200()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DMA03
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DMA03
++# endif
++# define machine_is_dma03()	(machine_arch_type == MACH_TYPE_DMA03)
++#else
++# define machine_is_dma03()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ROAD_S101
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ROAD_S101
++# endif
++# define machine_is_road_s101()	(machine_arch_type == MACH_TYPE_ROAD_S101)
++#else
++# define machine_is_road_s101()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IQ_NEXTGEN_A
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IQ_NEXTGEN_A
++# endif
++# define machine_is_iq_nextgen_a()	(machine_arch_type == MACH_TYPE_IQ_NEXTGEN_A)
++#else
++# define machine_is_iq_nextgen_a()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IQ_NEXTGEN_B
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IQ_NEXTGEN_B
++# endif
++# define machine_is_iq_nextgen_b()	(machine_arch_type == MACH_TYPE_IQ_NEXTGEN_B)
++#else
++# define machine_is_iq_nextgen_b()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IQ_NEXTGEN_C
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IQ_NEXTGEN_C
++# endif
++# define machine_is_iq_nextgen_c()	(machine_arch_type == MACH_TYPE_IQ_NEXTGEN_C)
++#else
++# define machine_is_iq_nextgen_c()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IQ_NEXTGEN_D
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IQ_NEXTGEN_D
++# endif
++# define machine_is_iq_nextgen_d()	(machine_arch_type == MACH_TYPE_IQ_NEXTGEN_D)
++#else
++# define machine_is_iq_nextgen_d()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IQ_NEXTGEN_E
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IQ_NEXTGEN_E
++# endif
++# define machine_is_iq_nextgen_e()	(machine_arch_type == MACH_TYPE_IQ_NEXTGEN_E)
++#else
++# define machine_is_iq_nextgen_e()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MALLOW_AT91
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MALLOW_AT91
++# endif
++# define machine_is_mallow_at91()	(machine_arch_type == MACH_TYPE_MALLOW_AT91)
++#else
++# define machine_is_mallow_at91()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CYBERTRACKER_I
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CYBERTRACKER_I
++# endif
++# define machine_is_cybertracker_i()	(machine_arch_type == MACH_TYPE_CYBERTRACKER_I)
++#else
++# define machine_is_cybertracker_i()	(0)
++#endif
++
++#ifdef CONFIG_MACH_GESBC931X
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_GESBC931X
++# endif
++# define machine_is_gesbc931x()	(machine_arch_type == MACH_TYPE_GESBC931X)
++#else
++# define machine_is_gesbc931x()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CENTIPAD
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CENTIPAD
++# endif
++# define machine_is_centipad()	(machine_arch_type == MACH_TYPE_CENTIPAD)
++#else
++# define machine_is_centipad()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ARMSOC
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ARMSOC
++# endif
++# define machine_is_armsoc()	(machine_arch_type == MACH_TYPE_ARMSOC)
++#else
++# define machine_is_armsoc()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SE4200
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SE4200
++# endif
++# define machine_is_se4200()	(machine_arch_type == MACH_TYPE_SE4200)
++#else
++# define machine_is_se4200()	(0)
++#endif
++
++#ifdef CONFIG_MACH_EMS197A
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_EMS197A
++# endif
++# define machine_is_ems197a()	(machine_arch_type == MACH_TYPE_EMS197A)
++#else
++# define machine_is_ems197a()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MICRO9
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MICRO9
++# endif
++# define machine_is_micro9()	(machine_arch_type == MACH_TYPE_MICRO9)
++#else
++# define machine_is_micro9()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MICRO9L
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MICRO9L
++# endif
++# define machine_is_micro9l()	(machine_arch_type == MACH_TYPE_MICRO9L)
++#else
++# define machine_is_micro9l()	(0)
++#endif
++
++#ifdef CONFIG_MACH_UC5471DSP
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_UC5471DSP
++# endif
++# define machine_is_uc5471dsp()	(machine_arch_type == MACH_TYPE_UC5471DSP)
++#else
++# define machine_is_uc5471dsp()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SJ5471ENG
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SJ5471ENG
++# endif
++# define machine_is_sj5471eng()	(machine_arch_type == MACH_TYPE_SJ5471ENG)
++#else
++# define machine_is_sj5471eng()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CMPXA26X
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CMPXA26X
++# endif
++# define machine_is_none()	(machine_arch_type == MACH_TYPE_CMPXA26X)
++#else
++# define machine_is_none()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NC
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NC
++# endif
++# define machine_is_nc1()	(machine_arch_type == MACH_TYPE_NC)
++#else
++# define machine_is_nc1()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_PALMTE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_PALMTE
++# endif
++# define machine_is_omap_palmte()	(machine_arch_type == MACH_TYPE_OMAP_PALMTE)
++#else
++# define machine_is_omap_palmte()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AJAX52X
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AJAX52X
++# endif
++# define machine_is_ajax52x()	(machine_arch_type == MACH_TYPE_AJAX52X)
++#else
++# define machine_is_ajax52x()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SIRIUSTAR
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SIRIUSTAR
++# endif
++# define machine_is_siriustar()	(machine_arch_type == MACH_TYPE_SIRIUSTAR)
++#else
++# define machine_is_siriustar()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IODATA_HDLG
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IODATA_HDLG
++# endif
++# define machine_is_iodata_hdlg()	(machine_arch_type == MACH_TYPE_IODATA_HDLG)
++#else
++# define machine_is_iodata_hdlg()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AT91RM9200UTL
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AT91RM9200UTL
++# endif
++# define machine_is_at91rm9200utl()	(machine_arch_type == MACH_TYPE_AT91RM9200UTL)
++#else
++# define machine_is_at91rm9200utl()	(0)
++#endif
++
++#ifdef CONFIG_MACH_BIOSAFE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_BIOSAFE
++# endif
++# define machine_is_biosafe()	(machine_arch_type == MACH_TYPE_BIOSAFE)
++#else
++# define machine_is_biosafe()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MP1000
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MP1000
++# endif
++# define machine_is_mp1000()	(machine_arch_type == MACH_TYPE_MP1000)
++#else
++# define machine_is_mp1000()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PARSY
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PARSY
++# endif
++# define machine_is_parsy()	(machine_arch_type == MACH_TYPE_PARSY)
++#else
++# define machine_is_parsy()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CCXP
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CCXP
++# endif
++# define machine_is_ccxp270()	(machine_arch_type == MACH_TYPE_CCXP)
++#else
++# define machine_is_ccxp270()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_GSAMPLE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_GSAMPLE
++# endif
++# define machine_is_omap_gsample()	(machine_arch_type == MACH_TYPE_OMAP_GSAMPLE)
++#else
++# define machine_is_omap_gsample()	(0)
++#endif
++
++#ifdef CONFIG_MACH_REALVIEW_EB
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_REALVIEW_EB
++# endif
++# define machine_is_realview_eb()	(machine_arch_type == MACH_TYPE_REALVIEW_EB)
++#else
++# define machine_is_realview_eb()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SAMOA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SAMOA
++# endif
++# define machine_is_samoa()	(machine_arch_type == MACH_TYPE_SAMOA)
++#else
++# define machine_is_samoa()	(0)
++#endif
++
++#ifdef CONFIG_MACH_T3XSCALE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_T3XSCALE
++# endif
++# define machine_is_t3xscale()	(machine_arch_type == MACH_TYPE_T3XSCALE)
++#else
++# define machine_is_t3xscale()	(0)
++#endif
++
++#ifdef CONFIG_MACH_I878
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_I878
++# endif
++# define machine_is_i878()	(machine_arch_type == MACH_TYPE_I878)
++#else
++# define machine_is_i878()	(0)
++#endif
++
++#ifdef CONFIG_MACH_BORZOI
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_BORZOI
++# endif
++# define machine_is_borzoi()	(machine_arch_type == MACH_TYPE_BORZOI)
++#else
++# define machine_is_borzoi()	(0)
++#endif
++
++#ifdef CONFIG_MACH_GECKO
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_GECKO
++# endif
++# define machine_is_gecko()	(machine_arch_type == MACH_TYPE_GECKO)
++#else
++# define machine_is_gecko()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DS101
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DS101
++# endif
++# define machine_is_ds101()	(machine_arch_type == MACH_TYPE_DS101)
++#else
++# define machine_is_ds101()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_PALMTT2
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_PALMTT2
++# endif
++# define machine_is_omap_palmtt2()	(machine_arch_type == MACH_TYPE_OMAP_PALMTT2)
++#else
++# define machine_is_omap_palmtt2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_XSCALE_PALMLD
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_XSCALE_PALMLD
++# endif
++# define machine_is_xscale_palmld()	(machine_arch_type == MACH_TYPE_XSCALE_PALMLD)
++#else
++# define machine_is_xscale_palmld()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CC9C
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CC9C
++# endif
++# define machine_is_cc9c()	(machine_arch_type == MACH_TYPE_CC9C)
++#else
++# define machine_is_cc9c()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SBC1670
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SBC1670
++# endif
++# define machine_is_sbc1670()	(machine_arch_type == MACH_TYPE_SBC1670)
++#else
++# define machine_is_sbc1670()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IXDP28X5
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IXDP28X5
++# endif
++# define machine_is_ixdp28x5()	(machine_arch_type == MACH_TYPE_IXDP28X5)
++#else
++# define machine_is_ixdp28x5()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_PALMTT
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_PALMTT
++# endif
++# define machine_is_omap_palmtt()	(machine_arch_type == MACH_TYPE_OMAP_PALMTT)
++#else
++# define machine_is_omap_palmtt()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ML696K
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ML696K
++# endif
++# define machine_is_ml696k()	(machine_arch_type == MACH_TYPE_ML696K)
++#else
++# define machine_is_ml696k()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ARCOM_ZEUS
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ARCOM_ZEUS
++# endif
++# define machine_is_arcom_zeus()	(machine_arch_type == MACH_TYPE_ARCOM_ZEUS)
++#else
++# define machine_is_arcom_zeus()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OSIRIS
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OSIRIS
++# endif
++# define machine_is_osiris()	(machine_arch_type == MACH_TYPE_OSIRIS)
++#else
++# define machine_is_osiris()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MAESTRO
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MAESTRO
++# endif
++# define machine_is_maestro()	(machine_arch_type == MACH_TYPE_MAESTRO)
++#else
++# define machine_is_maestro()	(0)
++#endif
++
++#ifdef CONFIG_MACH_TUNGE2
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_TUNGE2
++# endif
++# define machine_is_tunge2()	(machine_arch_type == MACH_TYPE_TUNGE2)
++#else
++# define machine_is_tunge2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IXBBM
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IXBBM
++# endif
++# define machine_is_ixbbm()	(machine_arch_type == MACH_TYPE_IXBBM)
++#else
++# define machine_is_ixbbm()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MX27
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MX27
++# endif
++# define machine_is_mx27ads()	(machine_arch_type == MACH_TYPE_MX27)
++#else
++# define machine_is_mx27ads()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AX8004
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AX8004
++# endif
++# define machine_is_ax8004()	(machine_arch_type == MACH_TYPE_AX8004)
++#else
++# define machine_is_ax8004()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AT91SAM9261EK
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AT91SAM9261EK
++# endif
++# define machine_is_at91sam9261ek()	(machine_arch_type == MACH_TYPE_AT91SAM9261EK)
++#else
++# define machine_is_at91sam9261ek()	(0)
++#endif
++
++#ifdef CONFIG_MACH_LOFT
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_LOFT
++# endif
++# define machine_is_loft()	(machine_arch_type == MACH_TYPE_LOFT)
++#else
++# define machine_is_loft()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MAGPIE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MAGPIE
++# endif
++# define machine_is_magpie()	(machine_arch_type == MACH_TYPE_MAGPIE)
++#else
++# define machine_is_magpie()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MX21
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MX21
++# endif
++# define machine_is_mx21ads()	(machine_arch_type == MACH_TYPE_MX21)
++#else
++# define machine_is_mx21ads()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MB87M3400
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MB87M3400
++# endif
++# define machine_is_mb87m3400()	(machine_arch_type == MACH_TYPE_MB87M3400)
++#else
++# define machine_is_mb87m3400()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MGUARD_DELTA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MGUARD_DELTA
++# endif
++# define machine_is_mguard_delta()	(machine_arch_type == MACH_TYPE_MGUARD_DELTA)
++#else
++# define machine_is_mguard_delta()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DAVINCI_DVDP
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DAVINCI_DVDP
++# endif
++# define machine_is_davinci_dvdp()	(machine_arch_type == MACH_TYPE_DAVINCI_DVDP)
++#else
++# define machine_is_davinci_dvdp()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HTCUNIVERSAL
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HTCUNIVERSAL
++# endif
++# define machine_is_htcuniversal()	(machine_arch_type == MACH_TYPE_HTCUNIVERSAL)
++#else
++# define machine_is_htcuniversal()	(0)
++#endif
++
++#ifdef CONFIG_MACH_TPAD
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_TPAD
++# endif
++# define machine_is_tpad()	(machine_arch_type == MACH_TYPE_TPAD)
++#else
++# define machine_is_tpad()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ROVERP3
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ROVERP3
++# endif
++# define machine_is_roverp3()	(machine_arch_type == MACH_TYPE_ROVERP3)
++#else
++# define machine_is_roverp3()	(0)
++#endif
++
++#ifdef CONFIG_MACH_JORNADA928
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_JORNADA928
++# endif
++# define machine_is_jornada928()	(machine_arch_type == MACH_TYPE_JORNADA928)
++#else
++# define machine_is_jornada928()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MV88FXX81
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MV88FXX81
++# endif
++# define machine_is_mv88fxx81()	(machine_arch_type == MACH_TYPE_MV88FXX81)
++#else
++# define machine_is_mv88fxx81()	(0)
++#endif
++
++#ifdef CONFIG_MACH_STMP36XX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_STMP36XX
++# endif
++# define machine_is_stmp36xx()	(machine_arch_type == MACH_TYPE_STMP36XX)
++#else
++# define machine_is_stmp36xx()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SXNI79524
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SXNI79524
++# endif
++# define machine_is_sxni79524()	(machine_arch_type == MACH_TYPE_SXNI79524)
++#else
++# define machine_is_sxni79524()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AMS_DELTA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AMS_DELTA
++# endif
++# define machine_is_ams_delta()	(machine_arch_type == MACH_TYPE_AMS_DELTA)
++#else
++# define machine_is_ams_delta()	(0)
++#endif
++
++#ifdef CONFIG_MACH_URANIUM
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_URANIUM
++# endif
++# define machine_is_uranium()	(machine_arch_type == MACH_TYPE_URANIUM)
++#else
++# define machine_is_uranium()	(0)
++#endif
++
++#ifdef CONFIG_MACH_UCON
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_UCON
++# endif
++# define machine_is_ucon()	(machine_arch_type == MACH_TYPE_UCON)
++#else
++# define machine_is_ucon()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NAS100D
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NAS100D
++# endif
++# define machine_is_nas100d()	(machine_arch_type == MACH_TYPE_NAS100D)
++#else
++# define machine_is_nas100d()	(0)
++#endif
++
++#ifdef CONFIG_MACH_L083_1000
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_L083_1000
++# endif
++# define machine_is_l083()	(machine_arch_type == MACH_TYPE_L083_1000)
++#else
++# define machine_is_l083()	(0)
++#endif
++
++#ifdef CONFIG_MACH_EZX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_EZX
++# endif
++# define machine_is_ezx()	(machine_arch_type == MACH_TYPE_EZX)
++#else
++# define machine_is_ezx()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PNX5220
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PNX5220
++# endif
++# define machine_is_pnx5220()	(machine_arch_type == MACH_TYPE_PNX5220)
++#else
++# define machine_is_pnx5220()	(0)
++#endif
++
++#ifdef CONFIG_MACH_BUTTE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_BUTTE
++# endif
++# define machine_is_butte()	(machine_arch_type == MACH_TYPE_BUTTE)
++#else
++# define machine_is_butte()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SRM2
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SRM2
++# endif
++# define machine_is_srm2()	(machine_arch_type == MACH_TYPE_SRM2)
++#else
++# define machine_is_srm2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DSBR
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DSBR
++# endif
++# define machine_is_dsbr()	(machine_arch_type == MACH_TYPE_DSBR)
++#else
++# define machine_is_dsbr()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CRYSTALBALL
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CRYSTALBALL
++# endif
++# define machine_is_crystalball()	(machine_arch_type == MACH_TYPE_CRYSTALBALL)
++#else
++# define machine_is_crystalball()	(0)
++#endif
++
++#ifdef CONFIG_MACH_TINYPXA27X
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_TINYPXA27X
++# endif
++# define machine_is_tinypxa27x()	(machine_arch_type == MACH_TYPE_TINYPXA27X)
++#else
++# define machine_is_tinypxa27x()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HERBIE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HERBIE
++# endif
++# define machine_is_herbie()	(machine_arch_type == MACH_TYPE_HERBIE)
++#else
++# define machine_is_herbie()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MAGICIAN
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MAGICIAN
++# endif
++# define machine_is_magician()	(machine_arch_type == MACH_TYPE_MAGICIAN)
++#else
++# define machine_is_magician()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CM4002
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CM4002
++# endif
++# define machine_is_cm4002()	(machine_arch_type == MACH_TYPE_CM4002)
++#else
++# define machine_is_cm4002()	(0)
++#endif
++
++#ifdef CONFIG_MACH_B4
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_B4
++# endif
++# define machine_is_b4()	(machine_arch_type == MACH_TYPE_B4)
++#else
++# define machine_is_b4()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MAUI
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MAUI
++# endif
++# define machine_is_maui()	(machine_arch_type == MACH_TYPE_MAUI)
++#else
++# define machine_is_maui()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CYBERTRACKER_G
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CYBERTRACKER_G
++# endif
++# define machine_is_cybertracker_g()	(machine_arch_type == MACH_TYPE_CYBERTRACKER_G)
++#else
++# define machine_is_cybertracker_g()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NXDKN
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NXDKN
++# endif
++# define machine_is_nxdkn()	(machine_arch_type == MACH_TYPE_NXDKN)
++#else
++# define machine_is_nxdkn()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MIO8390
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MIO8390
++# endif
++# define machine_is_mio8390()	(machine_arch_type == MACH_TYPE_MIO8390)
++#else
++# define machine_is_mio8390()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMI_BOARD
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMI_BOARD
++# endif
++# define machine_is_omi_board()	(machine_arch_type == MACH_TYPE_OMI_BOARD)
++#else
++# define machine_is_omi_board()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MX21CIV
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MX21CIV
++# endif
++# define machine_is_mx21civ()	(machine_arch_type == MACH_TYPE_MX21CIV)
++#else
++# define machine_is_mx21civ()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MAHI_CDAC
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MAHI_CDAC
++# endif
++# define machine_is_mahi_cdac()	(machine_arch_type == MACH_TYPE_MAHI_CDAC)
++#else
++# define machine_is_mahi_cdac()	(0)
++#endif
++
++#ifdef CONFIG_MACH_XSCALE_PALMTX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_XSCALE_PALMTX
++# endif
++# define machine_is_xscale_palmtx()	(machine_arch_type == MACH_TYPE_XSCALE_PALMTX)
++#else
++# define machine_is_xscale_palmtx()	(0)
++#endif
++
++#ifdef CONFIG_MACH_S3C2413
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_S3C2413
++# endif
++# define machine_is_s3c2413()	(machine_arch_type == MACH_TYPE_S3C2413)
++#else
++# define machine_is_s3c2413()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SAMSYS_EP0
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SAMSYS_EP0
++# endif
++# define machine_is_samsys_ep0()	(machine_arch_type == MACH_TYPE_SAMSYS_EP0)
++#else
++# define machine_is_samsys_ep0()	(0)
++#endif
++
++#ifdef CONFIG_MACH_WG302V1
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_WG302V1
++# endif
++# define machine_is_wg302v1()	(machine_arch_type == MACH_TYPE_WG302V1)
++#else
++# define machine_is_wg302v1()	(0)
++#endif
++
++#ifdef CONFIG_MACH_WG302V2
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_WG302V2
++# endif
++# define machine_is_wg302v2()	(machine_arch_type == MACH_TYPE_WG302V2)
++#else
++# define machine_is_wg302v2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_EB42X
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_EB42X
++# endif
++# define machine_is_eb42x()	(machine_arch_type == MACH_TYPE_EB42X)
++#else
++# define machine_is_eb42x()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IQ331ES
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IQ331ES
++# endif
++# define machine_is_iq331es()	(machine_arch_type == MACH_TYPE_IQ331ES)
++#else
++# define machine_is_iq331es()	(0)
++#endif
++
++#ifdef CONFIG_MACH_COSYDSP
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_COSYDSP
++# endif
++# define machine_is_cosydsp()	(machine_arch_type == MACH_TYPE_COSYDSP)
++#else
++# define machine_is_cosydsp()	(0)
++#endif
++
++#ifdef CONFIG_MACH_UPLAT7D
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_UPLAT7D
++# endif
++# define machine_is_uplat7d_proto()	(machine_arch_type == MACH_TYPE_UPLAT7D)
++#else
++# define machine_is_uplat7d_proto()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PTDAVINCI
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PTDAVINCI
++# endif
++# define machine_is_ptdavinci()	(machine_arch_type == MACH_TYPE_PTDAVINCI)
++#else
++# define machine_is_ptdavinci()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MBUS
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MBUS
++# endif
++# define machine_is_mbus()	(machine_arch_type == MACH_TYPE_MBUS)
++#else
++# define machine_is_mbus()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NADIA2VB
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NADIA2VB
++# endif
++# define machine_is_nadia2vb()	(machine_arch_type == MACH_TYPE_NADIA2VB)
++#else
++# define machine_is_nadia2vb()	(0)
++#endif
++
++#ifdef CONFIG_MACH_R1000
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_R1000
++# endif
++# define machine_is_r1000()	(machine_arch_type == MACH_TYPE_R1000)
++#else
++# define machine_is_r1000()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HW90250
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HW90250
++# endif
++# define machine_is_hw90250()	(machine_arch_type == MACH_TYPE_HW90250)
++#else
++# define machine_is_hw90250()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_2430SDP
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_2430SDP
++# endif
++# define machine_is_omap_2430sdp()	(machine_arch_type == MACH_TYPE_OMAP_2430SDP)
++#else
++# define machine_is_omap_2430sdp()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DAVINCI_EVM
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DAVINCI_EVM
++# endif
++# define machine_is_davinci_evm()	(machine_arch_type == MACH_TYPE_DAVINCI_EVM)
++#else
++# define machine_is_davinci_evm()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_TORNADO
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_TORNADO
++# endif
++# define machine_is_omap_tornado()	(machine_arch_type == MACH_TYPE_OMAP_TORNADO)
++#else
++# define machine_is_omap_tornado()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OLOCREEK
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OLOCREEK
++# endif
++# define machine_is_olocreek()	(machine_arch_type == MACH_TYPE_OLOCREEK)
++#else
++# define machine_is_olocreek()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PALMZ72
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PALMZ72
++# endif
++# define machine_is_palmz72()	(machine_arch_type == MACH_TYPE_PALMZ72)
++#else
++# define machine_is_palmz72()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NXDB500
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NXDB500
++# endif
++# define machine_is_nxdb500()	(machine_arch_type == MACH_TYPE_NXDB500)
++#else
++# define machine_is_nxdb500()	(0)
++#endif
++
++#ifdef CONFIG_MACH_APF9328
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_APF9328
++# endif
++# define machine_is_apf9328()	(machine_arch_type == MACH_TYPE_APF9328)
++#else
++# define machine_is_apf9328()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_WIPOQ
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_WIPOQ
++# endif
++# define machine_is_omap_wipoq()	(machine_arch_type == MACH_TYPE_OMAP_WIPOQ)
++#else
++# define machine_is_omap_wipoq()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_TWIP
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_TWIP
++# endif
++# define machine_is_omap_twip()	(machine_arch_type == MACH_TYPE_OMAP_TWIP)
++#else
++# define machine_is_omap_twip()	(0)
++#endif
++
++#ifdef CONFIG_MACH_XSCALE_PALMTREO650
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_XSCALE_PALMTREO650
++# endif
++# define machine_is_xscale_treo650()	(machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650)
++#else
++# define machine_is_xscale_treo650()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ACUMEN
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ACUMEN
++# endif
++# define machine_is_acumen()	(machine_arch_type == MACH_TYPE_ACUMEN)
++#else
++# define machine_is_acumen()	(0)
++#endif
++
++#ifdef CONFIG_MACH_XP100
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_XP100
++# endif
++# define machine_is_xp100()	(machine_arch_type == MACH_TYPE_XP100)
++#else
++# define machine_is_xp100()	(0)
++#endif
++
++#ifdef CONFIG_MACH_FS2410
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_FS2410
++# endif
++# define machine_is_fs2410()	(machine_arch_type == MACH_TYPE_FS2410)
++#else
++# define machine_is_fs2410()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PXA270_CERF
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PXA270_CERF
++# endif
++# define machine_is_pxa270_cerf()	(machine_arch_type == MACH_TYPE_PXA270_CERF)
++#else
++# define machine_is_pxa270_cerf()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SQ2FTLPALM
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SQ2FTLPALM
++# endif
++# define machine_is_sq2ftlpalm()	(machine_arch_type == MACH_TYPE_SQ2FTLPALM)
++#else
++# define machine_is_sq2ftlpalm()	(0)
++#endif
++
++#ifdef CONFIG_MACH_BSEMSERVER
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_BSEMSERVER
++# endif
++# define machine_is_bsemserver()	(machine_arch_type == MACH_TYPE_BSEMSERVER)
++#else
++# define machine_is_bsemserver()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NETCLIENT
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NETCLIENT
++# endif
++# define machine_is_netclient()	(machine_arch_type == MACH_TYPE_NETCLIENT)
++#else
++# define machine_is_netclient()	(0)
++#endif
++
++#ifdef CONFIG_MACH_XSCALE_PALMTT5
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_XSCALE_PALMTT5
++# endif
++# define machine_is_xscale_palmtt5()	(machine_arch_type == MACH_TYPE_XSCALE_PALMTT5)
++#else
++# define machine_is_xscale_palmtt5()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_PALMTC
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_PALMTC
++# endif
++# define machine_is_xscale_palmtc()	(machine_arch_type == MACH_TYPE_OMAP_PALMTC)
++#else
++# define machine_is_xscale_palmtc()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_APOLLON
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_APOLLON
++# endif
++# define machine_is_omap_apollon()	(machine_arch_type == MACH_TYPE_OMAP_APOLLON)
++#else
++# define machine_is_omap_apollon()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MXC30030EVB
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MXC30030EVB
++# endif
++# define machine_is_mxc30030evb()	(machine_arch_type == MACH_TYPE_MXC30030EVB)
++#else
++# define machine_is_mxc30030evb()	(0)
++#endif
++
++#ifdef CONFIG_MACH_REA_2D
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_REA_2D
++# endif
++# define machine_is_rea_2d()	(machine_arch_type == MACH_TYPE_REA_2D)
++#else
++# define machine_is_rea_2d()	(0)
++#endif
++
++#ifdef CONFIG_MACH_TI3E524
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_TI3E524
++# endif
++# define machine_is_eti3e524()	(machine_arch_type == MACH_TYPE_TI3E524)
++#else
++# define machine_is_eti3e524()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ATEB9200
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ATEB9200
++# endif
++# define machine_is_ateb9200()	(machine_arch_type == MACH_TYPE_ATEB9200)
++#else
++# define machine_is_ateb9200()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AUCKLAND
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AUCKLAND
++# endif
++# define machine_is_auckland()	(machine_arch_type == MACH_TYPE_AUCKLAND)
++#else
++# define machine_is_auckland()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AK3320M
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AK3320M
++# endif
++# define machine_is_ak3220m()	(machine_arch_type == MACH_TYPE_AK3320M)
++#else
++# define machine_is_ak3220m()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DURAMAX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DURAMAX
++# endif
++# define machine_is_duramax()	(machine_arch_type == MACH_TYPE_DURAMAX)
++#else
++# define machine_is_duramax()	(0)
++#endif
++
++#ifdef CONFIG_MACH_N35
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_N35
++# endif
++# define machine_is_n35()	(machine_arch_type == MACH_TYPE_N35)
++#else
++# define machine_is_n35()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PRONGHORN
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PRONGHORN
++# endif
++# define machine_is_pronghorn()	(machine_arch_type == MACH_TYPE_PRONGHORN)
++#else
++# define machine_is_pronghorn()	(0)
++#endif
++
++#ifdef CONFIG_MACH_FUNDY
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_FUNDY
++# endif
++# define machine_is_fundy()	(machine_arch_type == MACH_TYPE_FUNDY)
++#else
++# define machine_is_fundy()	(0)
++#endif
++
++#ifdef CONFIG_MACH_LOGICPD_PXA270
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_LOGICPD_PXA270
++# endif
++# define machine_is_logicpd_pxa270()	(machine_arch_type == MACH_TYPE_LOGICPD_PXA270)
++#else
++# define machine_is_logicpd_pxa270()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CPU777
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CPU777
++# endif
++# define machine_is_cpu777()	(machine_arch_type == MACH_TYPE_CPU777)
++#else
++# define machine_is_cpu777()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SIMICON9201
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SIMICON9201
++# endif
++# define machine_is_simicon9201()	(machine_arch_type == MACH_TYPE_SIMICON9201)
++#else
++# define machine_is_simicon9201()	(0)
++#endif
++
++#ifdef CONFIG_MACH_LEAP2_HPM
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_LEAP2_HPM
++# endif
++# define machine_is_leap2_hpm()	(machine_arch_type == MACH_TYPE_LEAP2_HPM)
++#else
++# define machine_is_leap2_hpm()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CM922TXA10
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CM922TXA10
++# endif
++# define machine_is_cm922txa10()	(machine_arch_type == MACH_TYPE_CM922TXA10)
++#else
++# define machine_is_cm922txa10()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PXA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PXA
++# endif
++# define machine_is_sandgate()	(machine_arch_type == MACH_TYPE_PXA)
++#else
++# define machine_is_sandgate()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SANDGATE2
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SANDGATE2
++# endif
++# define machine_is_sandgate2()	(machine_arch_type == MACH_TYPE_SANDGATE2)
++#else
++# define machine_is_sandgate2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SANDGATE2G
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SANDGATE2G
++# endif
++# define machine_is_sandgate2g()	(machine_arch_type == MACH_TYPE_SANDGATE2G)
++#else
++# define machine_is_sandgate2g()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SANDGATE2P
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SANDGATE2P
++# endif
++# define machine_is_sandgate2p()	(machine_arch_type == MACH_TYPE_SANDGATE2P)
++#else
++# define machine_is_sandgate2p()	(0)
++#endif
++
++#ifdef CONFIG_MACH_FRED_JACK
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_FRED_JACK
++# endif
++# define machine_is_fred_jack()	(machine_arch_type == MACH_TYPE_FRED_JACK)
++#else
++# define machine_is_fred_jack()	(0)
++#endif
++
++#ifdef CONFIG_MACH_TTG_COLOR1
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_TTG_COLOR1
++# endif
++# define machine_is_ttg_color1()	(machine_arch_type == MACH_TYPE_TTG_COLOR1)
++#else
++# define machine_is_ttg_color1()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NXEB500HMI
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NXEB500HMI
++# endif
++# define machine_is_nxeb500hmi()	(machine_arch_type == MACH_TYPE_NXEB500HMI)
++#else
++# define machine_is_nxeb500hmi()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NETDCU8
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NETDCU8
++# endif
++# define machine_is_netdcu8()	(machine_arch_type == MACH_TYPE_NETDCU8)
++#else
++# define machine_is_netdcu8()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ML675050_CPU_BOA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ML675050_CPU_BOA
++# endif
++# define machine_is_ml675050_cpu_boa()	(machine_arch_type == MACH_TYPE_ML675050_CPU_BOA)
++#else
++# define machine_is_ml675050_cpu_boa()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NG_FVX538
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NG_FVX538
++# endif
++# define machine_is_ng_fvx538()	(machine_arch_type == MACH_TYPE_NG_FVX538)
++#else
++# define machine_is_ng_fvx538()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NG_FVS338
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NG_FVS338
++# endif
++# define machine_is_ng_fvs338()	(machine_arch_type == MACH_TYPE_NG_FVS338)
++#else
++# define machine_is_ng_fvs338()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PNX4103
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PNX4103
++# endif
++# define machine_is_pnx4103()	(machine_arch_type == MACH_TYPE_PNX4103)
++#else
++# define machine_is_pnx4103()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HESDB
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HESDB
++# endif
++# define machine_is_hesdb()	(machine_arch_type == MACH_TYPE_HESDB)
++#else
++# define machine_is_hesdb()	(0)
++#endif
++
++#ifdef CONFIG_MACH_XSILO
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_XSILO
++# endif
++# define machine_is_xsilo()	(machine_arch_type == MACH_TYPE_XSILO)
++#else
++# define machine_is_xsilo()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ESPRESSO
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ESPRESSO
++# endif
++# define machine_is_espresso()	(machine_arch_type == MACH_TYPE_ESPRESSO)
++#else
++# define machine_is_espresso()	(0)
++#endif
++
++#ifdef CONFIG_MACH_EMLC
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_EMLC
++# endif
++# define machine_is_emlc()	(machine_arch_type == MACH_TYPE_EMLC)
++#else
++# define machine_is_emlc()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SISTERON
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SISTERON
++# endif
++# define machine_is_sisteron()	(machine_arch_type == MACH_TYPE_SISTERON)
++#else
++# define machine_is_sisteron()	(0)
++#endif
++
++#ifdef CONFIG_MACH_RX1950
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_RX1950
++# endif
++# define machine_is_rx1950()	(machine_arch_type == MACH_TYPE_RX1950)
++#else
++# define machine_is_rx1950()	(0)
++#endif
++
++#ifdef CONFIG_MACH_TSC_VENUS
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_TSC_VENUS
++# endif
++# define machine_is_tsc_venus()	(machine_arch_type == MACH_TYPE_TSC_VENUS)
++#else
++# define machine_is_tsc_venus()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DS101J
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DS101J
++# endif
++# define machine_is_ds101j()	(machine_arch_type == MACH_TYPE_DS101J)
++#else
++# define machine_is_ds101j()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MXC30030ADS
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MXC30030ADS
++# endif
++# define machine_is_mxc30030ads()	(machine_arch_type == MACH_TYPE_MXC30030ADS)
++#else
++# define machine_is_mxc30030ads()	(0)
++#endif
++
++#ifdef CONFIG_MACH_FUJITSU_WIMAXSOC
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_FUJITSU_WIMAXSOC
++# endif
++# define machine_is_fujitsu_wimaxsoc()	(machine_arch_type == MACH_TYPE_FUJITSU_WIMAXSOC)
++#else
++# define machine_is_fujitsu_wimaxsoc()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DUALPCMODEM
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DUALPCMODEM
++# endif
++# define machine_is_dualpcmodem()	(machine_arch_type == MACH_TYPE_DUALPCMODEM)
++#else
++# define machine_is_dualpcmodem()	(0)
++#endif
++
++#ifdef CONFIG_MACH_GESBC9312
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_GESBC9312
++# endif
++# define machine_is_gesbc9312()	(machine_arch_type == MACH_TYPE_GESBC9312)
++#else
++# define machine_is_gesbc9312()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HTCAPACHE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HTCAPACHE
++# endif
++# define machine_is_htcapache()	(machine_arch_type == MACH_TYPE_HTCAPACHE)
++#else
++# define machine_is_htcapache()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IXDP435
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IXDP435
++# endif
++# define machine_is_ixdp435()	(machine_arch_type == MACH_TYPE_IXDP435)
++#else
++# define machine_is_ixdp435()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CATPROVT100
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CATPROVT100
++# endif
++# define machine_is_catprovt100()	(machine_arch_type == MACH_TYPE_CATPROVT100)
++#else
++# define machine_is_catprovt100()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PICOTUX1XX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PICOTUX1XX
++# endif
++# define machine_is_picotux1xx()	(machine_arch_type == MACH_TYPE_PICOTUX1XX)
++#else
++# define machine_is_picotux1xx()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PICOTUX2XX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PICOTUX2XX
++# endif
++# define machine_is_picotux2xx()	(machine_arch_type == MACH_TYPE_PICOTUX2XX)
++#else
++# define machine_is_picotux2xx()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DSMG600
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DSMG600
++# endif
++# define machine_is_dsmg600()	(machine_arch_type == MACH_TYPE_DSMG600)
++#else
++# define machine_is_dsmg600()	(0)
++#endif
++
++#ifdef CONFIG_MACH_EMPC2
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_EMPC2
++# endif
++# define machine_is_empc2()	(machine_arch_type == MACH_TYPE_EMPC2)
++#else
++# define machine_is_empc2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_VENTURA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_VENTURA
++# endif
++# define machine_is_ventura()	(machine_arch_type == MACH_TYPE_VENTURA)
++#else
++# define machine_is_ventura()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PHIDGET_SBC
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PHIDGET_SBC
++# endif
++# define machine_is_phidget_sbc()	(machine_arch_type == MACH_TYPE_PHIDGET_SBC)
++#else
++# define machine_is_phidget_sbc()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IJ3K
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IJ3K
++# endif
++# define machine_is_ij3k()	(machine_arch_type == MACH_TYPE_IJ3K)
++#else
++# define machine_is_ij3k()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PISGAH
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PISGAH
++# endif
++# define machine_is_pisgah()	(machine_arch_type == MACH_TYPE_PISGAH)
++#else
++# define machine_is_pisgah()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_FSAMPLE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_FSAMPLE
++# endif
++# define machine_is_omap_fsample()	(machine_arch_type == MACH_TYPE_OMAP_FSAMPLE)
++#else
++# define machine_is_omap_fsample()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SG720
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SG720
++# endif
++# define machine_is_sg720()	(machine_arch_type == MACH_TYPE_SG720)
++#else
++# define machine_is_sg720()	(0)
++#endif
++
++#ifdef CONFIG_MACH_REDFOX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_REDFOX
++# endif
++# define machine_is_redfox()	(machine_arch_type == MACH_TYPE_REDFOX)
++#else
++# define machine_is_redfox()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MYSH_EP9315_1
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MYSH_EP9315_1
++# endif
++# define machine_is_mysh_ep9315_1()	(machine_arch_type == MACH_TYPE_MYSH_EP9315_1)
++#else
++# define machine_is_mysh_ep9315_1()	(0)
++#endif
++
++#ifdef CONFIG_MACH_TPF106
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_TPF106
++# endif
++# define machine_is_tpf106()	(machine_arch_type == MACH_TYPE_TPF106)
++#else
++# define machine_is_tpf106()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AT91RM9200KG
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AT91RM9200KG
++# endif
++# define machine_is_at91rm9200kg()	(machine_arch_type == MACH_TYPE_AT91RM9200KG)
++#else
++# define machine_is_at91rm9200kg()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SLEDB
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SLEDB
++# endif
++# define machine_is_racemt2()	(machine_arch_type == MACH_TYPE_SLEDB)
++#else
++# define machine_is_racemt2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ONTRACK
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ONTRACK
++# endif
++# define machine_is_ontrack()	(machine_arch_type == MACH_TYPE_ONTRACK)
++#else
++# define machine_is_ontrack()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PM1200
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PM1200
++# endif
++# define machine_is_pm1200()	(machine_arch_type == MACH_TYPE_PM1200)
++#else
++# define machine_is_pm1200()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ESS24XXX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ESS24XXX
++# endif
++# define machine_is_ess24562()	(machine_arch_type == MACH_TYPE_ESS24XXX)
++#else
++# define machine_is_ess24562()	(0)
++#endif
++
++#ifdef CONFIG_MACH_COREMP7
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_COREMP7
++# endif
++# define machine_is_coremp7()	(machine_arch_type == MACH_TYPE_COREMP7)
++#else
++# define machine_is_coremp7()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NEXCODER_6446
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NEXCODER_6446
++# endif
++# define machine_is_nexcoder_6446()	(machine_arch_type == MACH_TYPE_NEXCODER_6446)
++#else
++# define machine_is_nexcoder_6446()	(0)
++#endif
++
++#ifdef CONFIG_MACH_STVC8380
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_STVC8380
++# endif
++# define machine_is_stvc8380()	(machine_arch_type == MACH_TYPE_STVC8380)
++#else
++# define machine_is_stvc8380()	(0)
++#endif
++
++#ifdef CONFIG_MACH_TEKLYNX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_TEKLYNX
++# endif
++# define machine_is_teklynx()	(machine_arch_type == MACH_TYPE_TEKLYNX)
++#else
++# define machine_is_teklynx()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CARBONADO
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CARBONADO
++# endif
++# define machine_is_carbonado()	(machine_arch_type == MACH_TYPE_CARBONADO)
++#else
++# define machine_is_carbonado()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SYSMOS_MP730
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SYSMOS_MP730
++# endif
++# define machine_is_sysmos_mp730()	(machine_arch_type == MACH_TYPE_SYSMOS_MP730)
++#else
++# define machine_is_sysmos_mp730()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SNAPPER_CL15
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SNAPPER_CL15
++# endif
++# define machine_is_snapper_cl15()	(machine_arch_type == MACH_TYPE_SNAPPER_CL15)
++#else
++# define machine_is_snapper_cl15()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PGIGIM
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PGIGIM
++# endif
++# define machine_is_pgigim()	(machine_arch_type == MACH_TYPE_PGIGIM)
++#else
++# define machine_is_pgigim()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PTX9160P2
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PTX9160P2
++# endif
++# define machine_is_ptx9160p2()	(machine_arch_type == MACH_TYPE_PTX9160P2)
++#else
++# define machine_is_ptx9160p2()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DCORE1
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DCORE1
++# endif
++# define machine_is_dcore1()	(machine_arch_type == MACH_TYPE_DCORE1)
++#else
++# define machine_is_dcore1()	(0)
++#endif
++
++#ifdef CONFIG_MACH_VICTORPXA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_VICTORPXA
++# endif
++# define machine_is_victorpxa()	(machine_arch_type == MACH_TYPE_VICTORPXA)
++#else
++# define machine_is_victorpxa()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MX2DTB
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MX2DTB
++# endif
++# define machine_is_mx2dtb()	(machine_arch_type == MACH_TYPE_MX2DTB)
++#else
++# define machine_is_mx2dtb()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PXA_IREX_ER0100
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PXA_IREX_ER0100
++# endif
++# define machine_is_pxa_irex_er0100()	(machine_arch_type == MACH_TYPE_PXA_IREX_ER0100)
++#else
++# define machine_is_pxa_irex_er0100()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_PALMZ71
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_PALMZ71
++# endif
++# define machine_is_omap_palmz71()	(machine_arch_type == MACH_TYPE_OMAP_PALMZ71)
++#else
++# define machine_is_omap_palmz71()	(0)
++#endif
++
++#ifdef CONFIG_MACH_BARTEC_DEG
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_BARTEC_DEG
++# endif
++# define machine_is_bartec_deg()	(machine_arch_type == MACH_TYPE_BARTEC_DEG)
++#else
++# define machine_is_bartec_deg()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HW50251
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HW50251
++# endif
++# define machine_is_hw50251()	(machine_arch_type == MACH_TYPE_HW50251)
++#else
++# define machine_is_hw50251()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IBOX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IBOX
++# endif
++# define machine_is_ibox()	(machine_arch_type == MACH_TYPE_IBOX)
++#else
++# define machine_is_ibox()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ATLASLH7A404
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ATLASLH7A404
++# endif
++# define machine_is_atlaslh7a404()	(machine_arch_type == MACH_TYPE_ATLASLH7A404)
++#else
++# define machine_is_atlaslh7a404()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PT2026
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PT2026
++# endif
++# define machine_is_pt2026()	(machine_arch_type == MACH_TYPE_PT2026)
++#else
++# define machine_is_pt2026()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HTCALPINE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HTCALPINE
++# endif
++# define machine_is_htcalpine()	(machine_arch_type == MACH_TYPE_HTCALPINE)
++#else
++# define machine_is_htcalpine()	(0)
++#endif
++
++#ifdef CONFIG_MACH_BARTEC_VTU
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_BARTEC_VTU
++# endif
++# define machine_is_bartec_vtu()	(machine_arch_type == MACH_TYPE_BARTEC_VTU)
++#else
++# define machine_is_bartec_vtu()	(0)
++#endif
++
++#ifdef CONFIG_MACH_VCOREII
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_VCOREII
++# endif
++# define machine_is_vcoreii()	(machine_arch_type == MACH_TYPE_VCOREII)
++#else
++# define machine_is_vcoreii()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PDNB3
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PDNB3
++# endif
++# define machine_is_pdnb3()	(machine_arch_type == MACH_TYPE_PDNB3)
++#else
++# define machine_is_pdnb3()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HTCBEETLES
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HTCBEETLES
++# endif
++# define machine_is_htcbeetles()	(machine_arch_type == MACH_TYPE_HTCBEETLES)
++#else
++# define machine_is_htcbeetles()	(0)
++#endif
++
++#ifdef CONFIG_MACH_S3C6400
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_S3C6400
++# endif
++# define machine_is_s3c6400()	(machine_arch_type == MACH_TYPE_S3C6400)
++#else
++# define machine_is_s3c6400()	(0)
++#endif
++
++#ifdef CONFIG_MACH_S3C2443
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_S3C2443
++# endif
++# define machine_is_s3c2443()	(machine_arch_type == MACH_TYPE_S3C2443)
++#else
++# define machine_is_s3c2443()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OMAP_LDK
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OMAP_LDK
++# endif
++# define machine_is_omap_ldk()	(machine_arch_type == MACH_TYPE_OMAP_LDK)
++#else
++# define machine_is_omap_ldk()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SMDK2460
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SMDK2460
++# endif
++# define machine_is_smdk2460()	(machine_arch_type == MACH_TYPE_SMDK2460)
++#else
++# define machine_is_smdk2460()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SMDK2440
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SMDK2440
++# endif
++# define machine_is_smdk2440()	(machine_arch_type == MACH_TYPE_SMDK2440)
++#else
++# define machine_is_smdk2440()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SMDK2412
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SMDK2412
++# endif
++# define machine_is_smdk2412()	(machine_arch_type == MACH_TYPE_SMDK2412)
++#else
++# define machine_is_smdk2412()	(0)
++#endif
++
++#ifdef CONFIG_MACH_WEBBOX
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_WEBBOX
++# endif
++# define machine_is_webbox()	(machine_arch_type == MACH_TYPE_WEBBOX)
++#else
++# define machine_is_webbox()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CWWNDP
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CWWNDP
++# endif
++# define machine_is_cwwndp()	(machine_arch_type == MACH_TYPE_CWWNDP)
++#else
++# define machine_is_cwwndp()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DRAGON
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DRAGON
++# endif
++# define machine_is_dragon()	(machine_arch_type == MACH_TYPE_DRAGON)
++#else
++# define machine_is_dragon()	(0)
++#endif
++
++#ifdef CONFIG_MACH_OPENDO_CPU_BOARD
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_OPENDO_CPU_BOARD
++# endif
++# define machine_is_opendo_cpu_board()	(machine_arch_type == MACH_TYPE_OPENDO_CPU_BOARD)
++#else
++# define machine_is_opendo_cpu_board()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CCM2200
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CCM2200
++# endif
++# define machine_is_ccm2200()	(machine_arch_type == MACH_TYPE_CCM2200)
++#else
++# define machine_is_ccm2200()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ETWARM
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ETWARM
++# endif
++# define machine_is_etwarm()	(machine_arch_type == MACH_TYPE_ETWARM)
++#else
++# define machine_is_etwarm()	(0)
++#endif
++
++#ifdef CONFIG_MACH_M93030
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_M93030
++# endif
++# define machine_is_m93030()	(machine_arch_type == MACH_TYPE_M93030)
++#else
++# define machine_is_m93030()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CC7U
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CC7U
++# endif
++# define machine_is_cc7u()	(machine_arch_type == MACH_TYPE_CC7U)
++#else
++# define machine_is_cc7u()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MTT_RANGER
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MTT_RANGER
++# endif
++# define machine_is_mtt_ranger()	(machine_arch_type == MACH_TYPE_MTT_RANGER)
++#else
++# define machine_is_mtt_ranger()	(0)
++#endif
++
++#ifdef CONFIG_MACH_NEXUS
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_NEXUS
++# endif
++# define machine_is_nexus()	(machine_arch_type == MACH_TYPE_NEXUS)
++#else
++# define machine_is_nexus()	(0)
++#endif
++
++#ifdef CONFIG_MACH_DESMAN
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_DESMAN
++# endif
++# define machine_is_desman()	(machine_arch_type == MACH_TYPE_DESMAN)
++#else
++# define machine_is_desman()	(0)
++#endif
++
++#ifdef CONFIG_MACH_BKDE303
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_BKDE303
++# endif
++# define machine_is_bkde303()	(machine_arch_type == MACH_TYPE_BKDE303)
++#else
++# define machine_is_bkde303()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SMDK2413
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SMDK2413
++# endif
++# define machine_is_smdk2413()	(machine_arch_type == MACH_TYPE_SMDK2413)
++#else
++# define machine_is_smdk2413()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AML_M7200
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AML_M7200
++# endif
++# define machine_is_aml_m7200()	(machine_arch_type == MACH_TYPE_AML_M7200)
++#else
++# define machine_is_aml_m7200()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AML_M5900
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AML_M5900
++# endif
++# define machine_is_aml_m5900()	(machine_arch_type == MACH_TYPE_AML_M5900)
++#else
++# define machine_is_aml_m5900()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SG640
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SG640
++# endif
++# define machine_is_sg640()	(machine_arch_type == MACH_TYPE_SG640)
++#else
++# define machine_is_sg640()	(0)
++#endif
++
++#ifdef CONFIG_MACH_EDG79524
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_EDG79524
++# endif
++# define machine_is_edg79524()	(machine_arch_type == MACH_TYPE_EDG79524)
++#else
++# define machine_is_edg79524()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AI2410
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AI2410
++# endif
++# define machine_is_ai2410()	(machine_arch_type == MACH_TYPE_AI2410)
++#else
++# define machine_is_ai2410()	(0)
++#endif
++
++#ifdef CONFIG_MACH_IXP465
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_IXP465
++# endif
++# define machine_is_ixp465()	(machine_arch_type == MACH_TYPE_IXP465)
++#else
++# define machine_is_ixp465()	(0)
++#endif
++
++#ifdef CONFIG_MACH_BALLOON3
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_BALLOON3
++# endif
++# define machine_is_balloon3()	(machine_arch_type == MACH_TYPE_BALLOON3)
++#else
++# define machine_is_balloon3()	(0)
++#endif
++
++#ifdef CONFIG_MACH_HEINS
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_HEINS
++# endif
++# define machine_is_heins()	(machine_arch_type == MACH_TYPE_HEINS)
++#else
++# define machine_is_heins()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MPLUSEVA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MPLUSEVA
++# endif
++# define machine_is_mpluseva()	(machine_arch_type == MACH_TYPE_MPLUSEVA)
++#else
++# define machine_is_mpluseva()	(0)
++#endif
++
++#ifdef CONFIG_MACH_RT042
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_RT042
++# endif
++# define machine_is_rt042()	(machine_arch_type == MACH_TYPE_RT042)
++#else
++# define machine_is_rt042()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CWIEM
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CWIEM
++# endif
++# define machine_is_cwiem()	(machine_arch_type == MACH_TYPE_CWIEM)
++#else
++# define machine_is_cwiem()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CM_X270
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CM_X270
++# endif
++# define machine_is_cm_x270()	(machine_arch_type == MACH_TYPE_CM_X270)
++#else
++# define machine_is_cm_x270()	(0)
++#endif
++
++#ifdef CONFIG_MACH_CM_X255
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_CM_X255
++# endif
++# define machine_is_cm_x255()	(machine_arch_type == MACH_TYPE_CM_X255)
++#else
++# define machine_is_cm_x255()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ESH_AT91
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ESH_AT91
++# endif
++# define machine_is_esh_at91()	(machine_arch_type == MACH_TYPE_ESH_AT91)
++#else
++# define machine_is_esh_at91()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SANDGATE3
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SANDGATE3
++# endif
++# define machine_is_sandgate3()	(machine_arch_type == MACH_TYPE_SANDGATE3)
++#else
++# define machine_is_sandgate3()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PRIMO
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PRIMO
++# endif
++# define machine_is_primo()	(machine_arch_type == MACH_TYPE_PRIMO)
++#else
++# define machine_is_primo()	(0)
++#endif
++
++#ifdef CONFIG_MACH_GEMSTONE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_GEMSTONE
++# endif
++# define machine_is_gemstone()	(machine_arch_type == MACH_TYPE_GEMSTONE)
++#else
++# define machine_is_gemstone()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PRONGHORNMETRO
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PRONGHORNMETRO
++# endif
++# define machine_is_pronghorn_metro()	(machine_arch_type == MACH_TYPE_PRONGHORNMETRO)
++#else
++# define machine_is_pronghorn_metro()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SIDEWINDER
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SIDEWINDER
++# endif
++# define machine_is_sidewinder()	(machine_arch_type == MACH_TYPE_SIDEWINDER)
++#else
++# define machine_is_sidewinder()	(0)
++#endif
++
++#ifdef CONFIG_MACH_PICOMOD1
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_PICOMOD1
++# endif
++# define machine_is_picomod1()	(machine_arch_type == MACH_TYPE_PICOMOD1)
++#else
++# define machine_is_picomod1()	(0)
++#endif
++
++#ifdef CONFIG_MACH_SG590
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_SG590
++# endif
++# define machine_is_sg590()	(machine_arch_type == MACH_TYPE_SG590)
++#else
++# define machine_is_sg590()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AKAI9307
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AKAI9307
++# endif
++# define machine_is_akai9307()	(machine_arch_type == MACH_TYPE_AKAI9307)
++#else
++# define machine_is_akai9307()	(0)
++#endif
++
++#ifdef CONFIG_MACH_FONTAINE
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_FONTAINE
++# endif
++# define machine_is_fontaine()	(machine_arch_type == MACH_TYPE_FONTAINE)
++#else
++# define machine_is_fontaine()	(0)
++#endif
++
++#ifdef CONFIG_MACH_WOMBAT
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_WOMBAT
++# endif
++# define machine_is_wombat()	(machine_arch_type == MACH_TYPE_WOMBAT)
++#else
++# define machine_is_wombat()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ACQ300
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ACQ300
++# endif
++# define machine_is_acq300()	(machine_arch_type == MACH_TYPE_ACQ300)
++#else
++# define machine_is_acq300()	(0)
++#endif
++
++#ifdef CONFIG_MACH_MOD_270
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_MOD_270
++# endif
++# define machine_is_mod_270()	(machine_arch_type == MACH_TYPE_MOD_270)
++#else
++# define machine_is_mod_270()	(0)
++#endif
++
++#ifdef CONFIG_MACH_VC0820
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_VC0820
++# endif
++# define machine_is_vmc_vc0820()	(machine_arch_type == MACH_TYPE_VC0820)
++#else
++# define machine_is_vmc_vc0820()	(0)
++#endif
++
++#ifdef CONFIG_MACH_ANI_AIM
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_ANI_AIM
++# endif
++# define machine_is_ani_aim()	(machine_arch_type == MACH_TYPE_ANI_AIM)
++#else
++# define machine_is_ani_aim()	(0)
++#endif
++
++#ifdef CONFIG_MACH_JELLYFISH
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_JELLYFISH
++# endif
++# define machine_is_jellyfish()	(machine_arch_type == MACH_TYPE_JELLYFISH)
++#else
++# define machine_is_jellyfish()	(0)
++#endif
++
++#ifdef CONFIG_MACH_AMANITA
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_AMANITA
++# endif
++# define machine_is_amanita()	(machine_arch_type == MACH_TYPE_AMANITA)
++#else
++# define machine_is_amanita()	(0)
++#endif
++
++#ifdef CONFIG_MACH_VLINK
++# ifdef machine_arch_type
++#  undef machine_arch_type
++#  define machine_arch_type	__machine_arch_type
++# else
++#  define machine_arch_type	MACH_TYPE_VLINK
++# endif
++# define machine_is_vlink()	(machine_arch_type == MACH_TYPE_VLINK)
++#else
++# define machine_is_vlink()	(0)
++#endif
++
+ /*
+  * These have not yet been registered
+  */
+diff -Naur u-boot-1.1.4.org/include/config.h u-boot-1.1.4.tmp/include/config.h
+--- u-boot-1.1.4.org/include/config.h	2006-06-05 05:04:25.000000000 +0200
++++ u-boot-1.1.4.tmp/include/config.h	2006-06-05 05:03:47.000000000 +0200
+@@ -1,2 +1,2 @@
+ /* Automatically generated - do not edit */
+-#include <configs/at91rm9200dk.h>
++#include <configs/vlink.h>
+diff -Naur u-boot-1.1.4.org/include/config.mk u-boot-1.1.4.tmp/include/config.mk
+--- u-boot-1.1.4.org/include/config.mk	2006-06-05 05:04:25.000000000 +0200
++++ u-boot-1.1.4.tmp/include/config.mk	2006-06-05 05:03:47.000000000 +0200
+@@ -1,4 +1,4 @@
+ ARCH   = arm
+ CPU    = arm920t
+-BOARD  = at91rm9200dk
++BOARD  = vlink
+ SOC    = at91rm9200
+diff -Naur u-boot-1.1.4.org/include/configs/vlink.h u-boot-1.1.4.tmp/include/configs/vlink.h
+--- u-boot-1.1.4.org/include/configs/vlink.h	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.4.tmp/include/configs/vlink.h	2006-06-05 03:37:15.000000000 +0200
+@@ -0,0 +1,244 @@
++/*
++ * Hamish Guthrie <hamish@prodigi.ch>
++ *
++ * Configuation settings for the Figment Designs Versalink board.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++// Added 2 defines to skip re-init lowlevel and relocate HCG HLH
++//
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SKIP_RELOCATE_UBOOT
++
++/* ARM asynchronous clock */
++#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
++#define AT91C_MASTER_CLOCK	59904000	/* peripheral clock (AT91C_MASTER_CLOCK / 3) */
++/* #define AT91C_MASTER_CLOCK	44928000 */	/* peripheral clock (AT91C_MASTER_CLOCK / 4) */
++
++#define AT91_SLOW_CLOCK		32768	/* slow clock */
++
++#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
++#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
++#define CONFIG_VLINK		1	/* on a Versalink Board		*/
++#define CONFIG_IDENT_STRING 	" FDL Versalink"
++#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
++#define USE_920T_MMU		1
++
++#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_INITRD_TAG	1
++
++#ifndef CONFIG_SKIP_LOWLEVEL_INIT
++#define CFG_USE_MAIN_OSCILLATOR		1
++/* flash */
++#define MC_PUIA_VAL	0x00000000
++#define MC_PUP_VAL	0x00000000
++#define MC_PUER_VAL	0x00000000
++#define MC_ASR_VAL	0x00000000
++#define MC_AASR_VAL	0x00000000
++#define EBI_CFGR_VAL	0x00000000
++#define SMC2_CSR_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
++
++/* clocks */
++#define PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
++#define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
++#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
++
++/* sdram */
++#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
++#define PIOC_BSR_VAL	0x00000000
++#define PIOC_PDR_VAL	0xFFFF0000
++#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
++#define SDRC_CR_VAL	0x2188c155 /* set up the SDRAM */
++#define SDRAM		0x20000000 /* address of the SDRAM */
++#define SDRAM1		0x20000080 /* address of the SDRAM */
++#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
++#define SDRC_MR_VAL	0x00000002 /* Precharge All */
++#define SDRC_MR_VAL1	0x00000004 /* refresh */
++#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
++#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
++#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++/*
++ * Size of malloc() pool
++ */
++#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
++#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
++
++#define CONFIG_BAUDRATE 115200
++
++/*
++ * Hardware drivers
++ */
++
++/* define one of these to choose the DBGU, USART0  or USART1 as console */
++#define CONFIG_DBGU
++#undef CONFIG_USART0
++#undef CONFIG_USART1
++
++#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
++
++#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
++
++#define CONFIG_BOOTDELAY      3
++/* #define CONFIG_ENV_OVERWRITE	1 */
++
++#define CONFIG_COMMANDS		\
++		       ((CONFIG_CMD_DFL | CFG_CMD_MII |\
++			CFG_CMD_DHCP ) & \
++		      ~(CFG_CMD_BDI | \
++			CFG_CMD_IMI | \
++			CFG_CMD_AUTOSCRIPT | \
++			CFG_CMD_FPGA | \
++			CFG_CMD_MISC | \
++			CFG_CMD_LOADS ))
++
++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
++#include <cmd_confdefs.h>
++
++#ifndef CONFIG_VLINK
++#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
++#define SECTORSIZE 512
++
++#define ADDR_COLUMN 1
++#define ADDR_PAGE 2
++#define ADDR_COLUMN_PAGE 3
++
++#define NAND_ChipID_UNKNOWN	0x00
++#define NAND_MAX_FLOORS 1
++#define NAND_MAX_CHIPS 1
++
++#define AT91_SMART_MEDIA_ALE (1 << 22)	/* our ALE is AD22 */
++#define AT91_SMART_MEDIA_CLE (1 << 21)	/* our CLE is AD21 */
++
++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
++
++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
++
++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
++/* the following are NOP's in our implementation */
++#define NAND_CTL_CLRALE(nandptr)
++#define NAND_CTL_SETALE(nandptr)
++#define NAND_CTL_CLRCLE(nandptr)
++#define NAND_CTL_SETCLE(nandptr)
++#endif
++
++#define CONFIG_NR_DRAM_BANKS 1
++#define PHYS_SDRAM 0x20000000
++#define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
++
++#define CFG_MEMTEST_START		PHYS_SDRAM
++#define CFG_MEMTEST_END			CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
++
++#define CONFIG_DRIVER_ETHER
++#define CONFIG_NET_RETRY_COUNT		20
++#define CONFIG_AT91C_USE_RMII
++
++#define CONFIG_HAS_DATAFLASH		1
++#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
++#define CFG_MAX_DATAFLASH_BANKS 	2
++#define CFG_MAX_DATAFLASH_PAGES 	16384
++#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
++#define CFG_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
++
++#ifdef CONFIG_VLINK
++#define PHYS_FLASH_1			0x10000000
++#define PHYS_FLASH_SIZE			0x200000  /* 2 megs main flash */
++#define CFG_FLASH_BASE			PHYS_FLASH_1
++#define CFG_MAX_FLASH_BANKS		1
++#define CFG_MAX_FLASH_SECT		256
++#define CFG_FLASH_ERASE_TOUT		(2*CFG_HZ) /* Timeout for Flash Erase */
++#define CFG_FLASH_WRITE_TOUT		(2*CFG_HZ) /* Timeout for Flash Write */
++#endif
++
++#define	CFG_ENV_IS_IN_DATAFLASH
++
++#ifdef CFG_ENV_IS_IN_DATAFLASH
++#define CFG_ENV_OFFSET			0x21000
++#define CFG_ENV_ADDR			(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
++#define CFG_ENV_SIZE			0x8400  /* 0x8000 */
++#else
++#define CFG_ENV_IS_IN_FLASH		1
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
++#define CFG_ENV_SIZE			0x10000 /* sectors are 64K here */
++#else
++#define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
++#define CFG_ENV_SIZE			0x2000  /* 0x8000 */
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++#endif	/* CFG_ENV_IS_IN_DATAFLASH */
++
++
++#define CFG_LOAD_ADDR		0x21000000  /* default load address */
++
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CFG_BOOT_SIZE		0x00 /* 0 KBytes */
++#define CFG_U_BOOT_BASE		PHYS_FLASH_1
++#define CFG_U_BOOT_SIZE		0x60000 /* 384 KBytes */
++#else
++#define CFG_BOOT_SIZE		0x6000 /* 24 KBytes */
++#define CFG_U_BOOT_BASE		(PHYS_FLASH_1 + 0x10000)
++#define CFG_U_BOOT_SIZE		0x10000 /* 64 KBytes */
++#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
++
++#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
++
++#define CFG_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
++#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
++#define CFG_MAXARGS		16		/* max number of command args */
++#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
++
++#ifndef __ASSEMBLY__
++/*-----------------------------------------------------------------------
++ * Board specific extension for bd_info
++ *
++ * This structure is embedded in the global bd_info (bd_t) structure
++ * and can be used by the board specific code (eg board/...)
++ */
++
++struct bd_info_ext {
++	/* helper variable for board environment handling
++	 *
++	 * env_crc_valid == 0    =>   uninitialised
++	 * env_crc_valid  > 0    =>   environment crc in flash is valid
++	 * env_crc_valid  < 0    =>   environment crc in flash is invalid
++	 */
++	int env_crc_valid;
++};
++#endif
++
++#define CFG_HZ 1000
++#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
++					/* AT91C_TC_TIMER_DIV1_CLOCK */
++
++#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
++
++#ifdef CONFIG_USE_IRQ
++#error CONFIG_USE_IRQ not supported
++#endif
++
++#endif
+diff -Naur u-boot-1.1.4.org/MAKEALL u-boot-1.1.4.tmp/MAKEALL
+--- u-boot-1.1.4.org/MAKEALL	2005-12-16 17:39:27.000000000 +0100
++++ u-boot-1.1.4.tmp/MAKEALL	2006-06-05 02:44:24.000000000 +0200
+@@ -180,7 +180,7 @@
+ 	mx1ads		mx1fs2		omap1510inn	omap1610h2	\
+ 	omap1610inn	omap730p2	scb9328		smdk2400	\
+ 	smdk2410	trab		VCMA9		versatile	\
+-	versatileab	versatilepb	voiceblue
++	versatileab	versatilepb	voiceblue	vlink
+ "
+ 
+ #########################################################################
+diff -Naur u-boot-1.1.4.org/Makefile u-boot-1.1.4.tmp/Makefile
+--- u-boot-1.1.4.org/Makefile	2006-06-02 15:58:57.000000000 +0200
++++ u-boot-1.1.4.tmp/Makefile	2006-06-05 04:40:45.000000000 +0200
+@@ -1419,6 +1419,9 @@
+ mp2usb_config	:	unconfig
+ 	@./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200
+ 
++vlink_config	:	unconfig
++	@./mkconfig $(@:_config=) arm arm920t vlink NULL at91rm9200
++
+ 
+ ########################################################################
+ ## ARM Integrator boards - see doc/README-integrator for more info.
diff --git a/target/linux/at91/image/u-boot/patches/003-mac_init.patch b/target/linux/at91/image/u-boot/patches/003-mac_init.patch
new file mode 100644
index 0000000..ec5dffa
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/003-mac_init.patch
@@ -0,0 +1,14 @@
+--- u-boot-1.1.4.org/lib_arm/board.c	2006-06-05 12:36:22.000000000 +0200
++++ u-boot-1.1.4.tmp/lib_arm/board.c	2006-06-05 12:36:44.000000000 +0200
+@@ -332,6 +332,11 @@
+ 	}
+ #endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
+ 
++#ifdef CONFIG_MACH_VLINK
++	printf("Initialising MAC address\n\r");
++	eth_init(gd->bd);
++#endif
++
+ 	/* Initialize from environment */
+ 	if ((s = getenv ("loadaddr")) != NULL) {
+ 		load_addr = simple_strtoul (s, NULL, 16);
diff --git a/target/linux/at91/image/u-boot/patches/004-mac_config.patch b/target/linux/at91/image/u-boot/patches/004-mac_config.patch
new file mode 100644
index 0000000..73a8260
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/004-mac_config.patch
@@ -0,0 +1,15 @@
+--- u-boot-1.1.4.ttt/include/configs/vlink.h	2006-06-05 15:57:37.000000000 +0200
++++ u-boot-1.1.4/include/configs/vlink.h	2006-06-07 13:11:01.000000000 +0200
+@@ -105,9 +105,9 @@
+ 
+ #define CONFIG_COMMANDS		\
+ 		       ((CONFIG_CMD_DFL | CFG_CMD_MII |\
+-			CFG_CMD_DHCP ) & \
+-		      ~(CFG_CMD_BDI | \
+-			CFG_CMD_IMI | \
++			CFG_CMD_DHCP | \
++			CFG_CMD_BDI ) & \
++		      ~(CFG_CMD_IMI | \
+ 			CFG_CMD_AUTOSCRIPT | \
+ 			CFG_CMD_FPGA | \
+ 			CFG_CMD_MISC | \
diff --git a/target/linux/at91/image/u-boot/patches/005-remove_float.patch b/target/linux/at91/image/u-boot/patches/005-remove_float.patch
new file mode 100644
index 0000000..802c963
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/005-remove_float.patch
@@ -0,0 +1,13 @@
+diff -urN u-boot-1.1.4.old/cpu/arm920t/config.mk u-boot-1.1.4/cpu/arm920t/config.mk
+--- u-boot-1.1.4.old/cpu/arm920t/config.mk	2007-03-19 12:44:39.000000000 +0100
++++ u-boot-1.1.4/cpu/arm920t/config.mk	2007-03-20 09:23:54.000000000 +0100
+@@ -21,8 +21,7 @@
+ # MA 02111-1307 USA
+ #
+ 
+-PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
+-	-msoft-float
++PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 
+ 
+ PLATFORM_CPPFLAGS += -march=armv4
+ # =========================================================================
diff --git a/target/linux/at91/image/u-boot/patches/006-generate_params.patch b/target/linux/at91/image/u-boot/patches/006-generate_params.patch
new file mode 100644
index 0000000..d278cfb
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/006-generate_params.patch
@@ -0,0 +1,115 @@
+--- u-boot-1.1.4.old/tools/Makefile	2007-03-22 18:17:25.000000000 +0100
++++ u-boot-1.1.4/tools/Makefile	2007-03-22 17:08:46.000000000 +0100
+@@ -21,9 +21,9 @@
+ # MA 02111-1307 USA
+ #
+ 
+-BINS	= img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
++BINS	= img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) ubparams$(SFX)
+ 
+-OBJS	= environment.o img2srec.o mkimage.o crc32.o envcrc.o gen_eth_addr.o bmp_logo.o
++OBJS	= environment.o img2srec.o mkimage.o crc32.o envcrc.o gen_eth_addr.o bmp_logo.o ubparams.o
+ 
+ ifeq ($(ARCH),mips)
+ BINS   += inca-swap-bytes$(SFX)
+@@ -118,6 +118,9 @@
+ 
+ all:	.depend $(BINS) $(LOGO_H) subdirs
+ 
++ubparams$(SFX): ubparams.o crc32.o
++		$(CC) $(CFLAGS) -o $@ $^
++
+ envcrc$(SFX):	envcrc.o crc32.o environment.o
+ 		$(CC) $(CFLAGS) -o $@ $^
+ 
+@@ -149,6 +152,9 @@
+ 		$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
+ 		$(STRIP) $@
+ 
++ubparams.o: ubparams.c
++		$(CC) -g $(CFLAGS) -c $<
++
+ envcrc.o:	envcrc.c
+ 		$(CC) -g $(CFLAGS) -c $<
+ 
+--- u-boot-1.1.4.old/tools/ubparams.c	1970-01-01 01:00:00.000000000 +0100
++++ u-boot-1.1.4/tools/ubparams.c	2007-03-22 18:09:52.000000000 +0100
+@@ -0,0 +1,78 @@
++/*
++ * ubparams.c
++ * 
++ * Generate a u-boot parameter block with correct crc
++ *
++ * (C) 1007 Guthrie Consulting
++ * hamish@prodigi.ch
++ *
++ */
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++
++#ifndef __ASSEMBLY__
++#define __ASSEMBLY__
++#endif
++#define __ASM_STUB_PROCESSOR_H__
++#include <config.h>
++#undef __ASSEMBLY__
++#include "environment.h"
++
++#define XMK_STR(x)  #x
++#define MK_STR(x)  XMK_STR(x)
++
++extern unsigned long crc32 (unsigned long, const unsigned char *, unsigned int);
++
++#if !defined(ENV_CRC)
++#define ENV_CRC ~0
++#endif
++
++unsigned int env_size = 0x8400;
++env_t environment = {
++	ENV_CRC,
++	"bootdelay=3\0"
++	"baudrate=115200\0"
++	"stdin=serial\0"
++	"stdout=serial\0"
++	"stderr=serial\0"
++	"partitions=mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data)\0"
++	"fbargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
++	"rdba=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
++	"rdram=run rdba; tftp 21000000 vImage; tftp 21200000 root.squashfs; bootm 21000000\0"
++	"flash=run fbargs; bootm 0xc0042000\0"
++	"bootargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
++	"bootcmd=bootm 0xc0042000\0"
++	"ethaddr=00:30:49:00:00:01\0"
++	"ipaddr=10.0.1.73\0"
++	"serverip=10.0.1.210\0"
++	"serial#=MX070205484\0"
++	"\0"
++	};
++
++int main(void) {
++	env_t *envptr, *source;
++	unsigned char *dataptr;
++	FILE *params;
++
++	source = &environment;
++	envptr = (env_t *)malloc(CFG_ENV_SIZE);
++	dataptr = (unsigned char *)envptr + ENV_HEADER_SIZE;
++
++	printf("Make u-boot params\n");
++	printf("Params size is %d\n", CFG_ENV_SIZE);
++
++	memset(envptr, 0, CFG_ENV_SIZE);
++	memcpy(envptr, source, sizeof(environment));
++
++	envptr->crc = crc32(0, envptr->data, ENV_SIZE);
++
++	params = fopen("params", "w");
++	fwrite(envptr, CFG_ENV_SIZE, 1, params);
++	fclose(params);
++
++	free(envptr);
++	}
++	
++	
diff --git a/target/linux/at91/image/u-boot/patches/007-ubparams_bugfix.patch b/target/linux/at91/image/u-boot/patches/007-ubparams_bugfix.patch
new file mode 100644
index 0000000..3d069e4
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/007-ubparams_bugfix.patch
@@ -0,0 +1,11 @@
+--- u-boot-1.1.4.old/tools/ubparams.c	2007-03-22 18:09:52.000000000 +0100
++++ u-boot-1.1.4/tools/ubparams.c	2007-03-22 18:29:32.000000000 +0100
+@@ -18,7 +18,7 @@
+ #define __ASM_STUB_PROCESSOR_H__
+ #include <config.h>
+ #undef __ASSEMBLY__
+-#include "environment.h"
++#include <environment.h>
+ 
+ #define XMK_STR(x)  #x
+ #define MK_STR(x)  XMK_STR(x)
diff --git a/target/linux/at91/image/u-boot/patches/008-ubparams_bugfix.patch b/target/linux/at91/image/u-boot/patches/008-ubparams_bugfix.patch
new file mode 100644
index 0000000..9a16e19
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/008-ubparams_bugfix.patch
@@ -0,0 +1,10 @@
+--- u-boot-1.1.4.old/tools/ubparams.c	2007-03-23 10:51:17.000000000 +0100
++++ u-boot-1.1.4/tools/ubparams.c	2007-03-23 10:49:37.000000000 +0100
+@@ -73,6 +73,7 @@
+ 	fclose(params);
+ 
+ 	free(envptr);
++	return 0;
+ 	}
+ 	
+ 	
diff --git a/target/linux/at91/image/u-boot/patches/009-mac_init_bugfix.patch b/target/linux/at91/image/u-boot/patches/009-mac_init_bugfix.patch
new file mode 100644
index 0000000..a36ebe3
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/009-mac_init_bugfix.patch
@@ -0,0 +1,12 @@
+diff -urN u-boot-1.1.4.old/lib_arm/board.c u-boot-1.1.4/lib_arm/board.c
+--- u-boot-1.1.4.old/lib_arm/board.c	2007-03-23 10:53:52.000000000 +0100
++++ u-boot-1.1.4/lib_arm/board.c	2007-03-24 13:17:12.000000000 +0100
+@@ -332,7 +332,7 @@
+ 	}
+ #endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
+ 
+-#ifdef CONFIG_MACH_VLINK
++#ifdef CONFIG_VLINK
+ 	printf("Initialising MAC address\n\r");
+ 	eth_init(gd->bd);
+ #endif
diff --git a/target/linux/at91/image/u-boot/patches/010-irda-patch-remove.patch b/target/linux/at91/image/u-boot/patches/010-irda-patch-remove.patch
new file mode 100644
index 0000000..2f23f5b
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/010-irda-patch-remove.patch
@@ -0,0 +1,13 @@
+--- u-boot-1.1.4.old/board/vlink/vlink.c	2007-04-03 11:42:39.000000000 +0200
++++ u-boot-1.1.4/board/vlink/vlink.c	2007-04-03 11:48:33.000000000 +0200
+@@ -40,10 +40,6 @@
+ 	/* Enable Ctrlc */
+ 	console_init_f ();
+ 
+-	/* Correct IRDA resistor problem */
+-	/* Set PA23_TXD in Output */
+-	(AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2;
+-
+ 	/* memory and cpu-speed are setup before relocation */
+ 	/* so we do _nothing_ here */
+ 
diff --git a/target/linux/at91/image/u-boot/patches/011-ubparams_update.patch b/target/linux/at91/image/u-boot/patches/011-ubparams_update.patch
new file mode 100644
index 0000000..267903e
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/011-ubparams_update.patch
@@ -0,0 +1,19 @@
+diff -urN u-boot-1.1.4.old/tools/ubparams.c u-boot-1.1.4/tools/ubparams.c
+--- u-boot-1.1.4.old/tools/ubparams.c	2007-05-01 13:20:17.000000000 +0200
++++ u-boot-1.1.4/tools/ubparams.c	2007-05-04 10:13:34.000000000 +0200
+@@ -37,12 +37,11 @@
+ 	"stdin=serial\0"
+ 	"stdout=serial\0"
+ 	"stderr=serial\0"
+-	"partitions=mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data)\0"
+-	"fbargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
+-	"rdba=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
++	"fbargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
++	"rdba=setenv bootargs root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
+ 	"rdram=run rdba; tftp 21000000 vImage; tftp 21200000 root.squashfs; bootm 21000000\0"
+ 	"flash=run fbargs; bootm 0xc0042000\0"
+-	"bootargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
++	"bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
+ 	"bootcmd=bootm 0xc0042000\0"
+ 	"ethaddr=00:30:49:00:00:01\0"
+ 	"ipaddr=10.0.1.73\0"
diff --git a/target/linux/at91/image/u-boot/patches/012-make_3.81.patch b/target/linux/at91/image/u-boot/patches/012-make_3.81.patch
new file mode 100644
index 0000000..767493f
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/012-make_3.81.patch
@@ -0,0 +1,16 @@
+diff -urN u-boot-1.1.4.orig/examples/Makefile u-boot-1.1.4/examples/Makefile
+--- u-boot-1.1.4.orig/examples/Makefile	2007-05-13 13:45:44.000000000 +0200
++++ u-boot-1.1.4/examples/Makefile	2007-05-13 13:48:43.000000000 +0200
+@@ -123,10 +123,10 @@
+ 	$(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \
+ 		-o $@ -e $(<:.o=) $< $(LIB) \
+ 		-L$(gcclibdir) -lgcc
+-%.srec:	%
++%.srec:	%.o
+ 	$(OBJCOPY) -O srec $< $@ 2>/dev/null
+ 
+-%.bin:	%
++%.bin:	%.o
+ 	$(OBJCOPY) -O binary $< $@ 2>/dev/null
+ 
+ #########################################################################
diff --git a/target/linux/at91/image/u-boot/patches/013-params-in-config.patch b/target/linux/at91/image/u-boot/patches/013-params-in-config.patch
new file mode 100644
index 0000000..11ff2a3
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/013-params-in-config.patch
@@ -0,0 +1,24 @@
+--- u-boot-1.1.4.old/tools/Makefile	2007-06-13 13:35:59.000000000 +0200
++++ u-boot-1.1.4/tools/Makefile	2007-06-14 15:33:04.000000000 +0200
+@@ -153,7 +153,7 @@
+ 		$(STRIP) $@
+ 
+ ubparams.o: ubparams.c
+-		$(CC) -g $(CFLAGS) -c $<
++		$(CC) -g $(CFLAGS) -DLAN_IP=$(LAN_IP) -DLAN_SERVERIP=$(LAN_SERVERIP) -c $<
+ 
+ envcrc.o:	envcrc.c
+ 		$(CC) -g $(CFLAGS) -c $<
+--- u-boot-1.1.4.old/tools/ubparams.c	2007-06-13 13:35:59.000000000 +0200
++++ u-boot-1.1.4/tools/ubparams.c	2007-06-14 15:31:55.000000000 +0200
+@@ -44,8 +44,8 @@
+ 	"bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
+ 	"bootcmd=bootm 0xc0042000\0"
+ 	"ethaddr=00:30:49:00:00:01\0"
+-	"ipaddr=10.0.1.73\0"
+-	"serverip=10.0.1.210\0"
++	"ipaddr=" MK_STR(LAN_IP) "\0"
++	"serverip=" MK_STR(LAN_SERVERIP) "\0"
+ 	"serial#=MX070205484\0"
+ 	"\0"
+ 	};
diff --git a/target/linux/at91/image/u-boot/patches/014-ubparam-kernel.patch b/target/linux/at91/image/u-boot/patches/014-ubparam-kernel.patch
new file mode 100644
index 0000000..f6d0a1b
--- /dev/null
+++ b/target/linux/at91/image/u-boot/patches/014-ubparam-kernel.patch
@@ -0,0 +1,11 @@
+--- u-boot-1.1.4.old/tools/ubparams.c	2007-06-19 14:24:39.000000000 +0200
++++ u-boot-1.1.4/tools/ubparams.c	2007-06-19 14:25:05.000000000 +0200
+@@ -39,7 +39,7 @@
+ 	"stderr=serial\0"
+ 	"fbargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
+ 	"rdba=setenv bootargs root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
+-	"rdram=run rdba; tftp 21000000 vImage; tftp 21200000 root.squashfs; bootm 21000000\0"
++	"rdram=run rdba; tftp 21000000 uImage; tftp 21200000 root.squashfs; bootm 21000000\0"
+ 	"flash=run fbargs; bootm 0xc0042000\0"
+ 	"bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
+ 	"bootcmd=bootm 0xc0042000\0"
diff --git a/target/linux/at91/image/u-boot/ubclient/Makefile b/target/linux/at91/image/u-boot/ubclient/Makefile
new file mode 100644
index 0000000..f8ff67c
--- /dev/null
+++ b/target/linux/at91/image/u-boot/ubclient/Makefile
@@ -0,0 +1,15 @@
+#
+
+all: ubpar
+
+crc32.c:
+	ln -s ../lib_generic/crc32.c ./
+
+%.o: %.c
+	$(CC) -I ../include $(CFLAGS) $(EXTRA_FLAGS) -DLAN_IP=$(LAN_IP) -DLAN_SERVERIP=$(LAN_SERVERIP) -c -o $@ $^
+
+ubpar: ubpar.o crc32.o
+	$(CC) -o $@ $^
+
+clean:
+	rm -f *.o ubpar
diff --git a/target/linux/at91/image/u-boot/ubclient/ubpar.c b/target/linux/at91/image/u-boot/ubclient/ubpar.c
new file mode 100644
index 0000000..7e8ea0e
--- /dev/null
+++ b/target/linux/at91/image/u-boot/ubclient/ubpar.c
@@ -0,0 +1,135 @@
+/*
+ * ubparams.c
+ * 
+ * Generate a u-boot parameter block with correct crc
+ *
+ * (C) 1007 Guthrie Consulting
+ * hamish@prodigi.ch
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#ifndef __ASSEMBLY__
+#define __ASSEMBLY__
+#endif
+#define __ASM_STUB_PROCESSOR_H__
+#include <config.h>
+#undef __ASSEMBLY__
+#include <environment.h>
+
+#define XMK_STR(x)  #x
+#define MK_STR(x)  XMK_STR(x)
+
+extern unsigned long crc32 (unsigned long, const unsigned char *, unsigned int);
+
+#if !defined(ENV_CRC)
+#define ENV_CRC ~0
+#endif
+
+#ifdef LAN_IP
+	#warning LAN_IP
+#else
+	#warning LAN_IP NOT DEFINED
+#endif
+#ifdef LAN_SERVERIP
+	#warning LAN_SERVERIP
+#else
+	#warning LAN_SERVERIP NOT DEFINED
+#endif
+
+static char *environment[] = {
+	"bootdelay=3\0"
+	"baudrate=115200\0"
+	"stdin=serial\0"
+	"stdout=serial\0"
+	"stderr=serial\0"
+	"fbargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
+	"rdba=setenv bootargs root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
+	"rdram=run rdba; tftp 21000000 uImage; tftp 21200000 root.squashfs; bootm 21000000\0"
+	"flash=run fbargs; bootm 0xc0042000\0"
+	"bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0"
+	"bootcmd=bootm 0xc0042000\0"
+	"ipaddr=" MK_STR(LAN_IP) "\0"
+	"serverip=" MK_STR(LAN_SERVERIP) "\0"
+	"\0"
+	};
+
+int main(int argc, char *argv[]) {
+	env_t *envptr;
+	char *src, *srcptr;
+	char *dataptr;
+	FILE *params;
+	int argfail = 1;
+	char newmac[30];
+	char newser[30];
+	int paramlen = 0;
+	int progmac = 0;
+	int progser = 0;
+
+	if (argc < 3) {
+		printf ("Invalid arguments\n");
+		return 1;
+		}
+
+	switch (argc) {
+		case 5:
+			if (strcmp(argv[3], "--serial") == 0) {
+				argfail = 0;
+				sprintf(newser, "serial#=%s", argv[4]);
+				progser = 1;
+				}
+		case 3:
+			if (strcmp(argv[1], "--mac") == 0) {
+				argfail = 0;
+				sprintf(newmac, "ethaddr=%s", argv[2]);
+				progmac = 1;
+				}
+			else
+				argfail = 1;
+		}
+
+	if (argfail) {
+		printf("Invalid arguments\n");
+		return 1;
+		}
+
+
+	src = srcptr = *environment;
+	envptr = (env_t *)malloc(CFG_ENV_SIZE);
+	dataptr = (char *)envptr + ENV_HEADER_SIZE;
+
+	while(*srcptr) {
+		//printf("%d, %s\n", strlen(srcptr), srcptr);
+		paramlen += strlen(srcptr) + 1;
+		srcptr += strlen(srcptr) + 1;
+		}
+
+	printf("Make u-boot params\n");
+	printf("Params size is %d\n", CFG_ENV_SIZE);
+
+	memset(envptr, 0, CFG_ENV_SIZE);
+	memcpy(dataptr, src, paramlen);
+	dataptr += paramlen;
+
+	if (progmac) {
+		memcpy(dataptr, newmac, strlen(newmac));
+		dataptr += strlen(newmac) + 1;
+		}
+
+	if (progser) {
+		memcpy(dataptr, newser, strlen(newser));
+		dataptr += strlen(newser) + 1;
+		}
+
+	envptr->crc = crc32(0, envptr->data, ENV_SIZE);
+
+	params = fopen("/dev/mtd1", "w");
+	fwrite(envptr, CFG_ENV_SIZE, 1, params);
+	fclose(params);
+
+	free(envptr);
+	return 0;
+}