summaryrefslogtreecommitdiff
path: root/target/linux/at91/patches-2.6.25
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2008-07-26 10:53:23 +0000
committerGabor Juhos <juhosg@openwrt.org>2008-07-26 10:53:23 +0000
commit104b3386a23c4179fb3a993bed106c256625a70d (patch)
tree2fe999020575731d650df26a0a188e045f2db29e /target/linux/at91/patches-2.6.25
parentbdfc0556b878cc06a0741983227a8f166079c50d (diff)
downloadmtk-20170518-104b3386a23c4179fb3a993bed106c256625a70d.zip
mtk-20170518-104b3386a23c4179fb3a993bed106c256625a70d.tar.gz
mtk-20170518-104b3386a23c4179fb3a993bed106c256625a70d.tar.bz2
update to 2.6.25.12
SVN-Revision: 11933
Diffstat (limited to 'target/linux/at91/patches-2.6.25')
-rw-r--r--target/linux/at91/patches-2.6.25/000-at91patches.patch591
-rw-r--r--target/linux/at91/patches-2.6.25/001-vlink-machine.patch12
-rw-r--r--target/linux/at91/patches-2.6.25/002-led-driver.patch20
-rw-r--r--target/linux/at91/patches-2.6.25/003-gpio-driver.patch30
-rw-r--r--target/linux/at91/patches-2.6.25/007-mtd-partition.patch28
-rw-r--r--target/linux/at91/patches-2.6.25/008-fdl-serial.patch4
-rw-r--r--target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch8
-rw-r--r--target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch10
-rw-r--r--target/linux/at91/patches-2.6.25/014-initpartition.patch8
-rw-r--r--target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch4
10 files changed, 289 insertions, 426 deletions
diff --git a/target/linux/at91/patches-2.6.25/000-at91patches.patch b/target/linux/at91/patches-2.6.25/000-at91patches.patch
index b522a30..74962b2 100644
--- a/target/linux/at91/patches-2.6.25/000-at91patches.patch
+++ b/target/linux/at91/patches-2.6.25/000-at91patches.patch
@@ -1,6 +1,5 @@
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach-at91/Kconfig
---- linux-2.6.25/arch/arm/mach-at91/Kconfig 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/Kconfig 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/Kconfig
++++ b/arch/arm/mach-at91/Kconfig
@@ -12,18 +12,28 @@
config ARCH_AT91SAM9260
@@ -165,9 +164,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach
config AT91_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Makefile linux-2.6/arch/arm/mach-at91/Makefile
---- linux-2.6.25/arch/arm/mach-at91/Makefile 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/Makefile 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/Makefile
++++ b/arch/arm/mach-at91/Makefile
@@ -28,16 +28,26 @@
obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
@@ -207,9 +205,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Makefile linux-2.6/arch/arm/mac
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/mach-at91/at91cap9.c
---- linux-2.6.25/arch/arm/mach-at91/at91cap9.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91cap9.c 2008-05-05 22:01:39.000000000 +0200
+--- a/arch/arm/mach-at91/at91cap9.c
++++ b/arch/arm/mach-at91/at91cap9.c
@@ -13,12 +13,15 @@
*/
@@ -260,9 +257,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/m
}
/* --------------------------------------------------------------------
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/arch/arm/mach-at91/at91cap9_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91cap9_devices.c 2008-05-05 22:01:39.000000000 +0200
+--- a/arch/arm/mach-at91/at91cap9_devices.c
++++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -13,18 +13,20 @@
*/
#include <asm/mach/arch.h>
@@ -554,9 +550,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91rm9200_devices.c
++++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -513,7 +513,18 @@
* SPI
* -------------------------------------------------------------------- */
@@ -734,9 +729,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_time.c linux-2.6/arch/arm/mach-at91/at91rm9200_time.c
---- linux-2.6.25/arch/arm/mach-at91/at91rm9200_time.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91rm9200_time.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91rm9200_time.c
++++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -136,8 +136,6 @@
u32 alm;
int status = 0;
@@ -746,9 +740,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_time.c linux-2.6/arc
/* Use "raw" primitives so we behave correctly on RT kernels. */
raw_local_irq_save(flags);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260.c linux-2.6/arch/arm/mach-at91/at91sam9260.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9260.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9260.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9260.c
++++ b/arch/arm/mach-at91/at91sam9260.c
@@ -11,6 +11,7 @@
*/
@@ -785,9 +778,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260.c linux-2.6/arch/ar
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9260_devices.c
++++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -19,8 +19,8 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
@@ -958,9 +950,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261.c linux-2.6/arch/arm/mach-at91/at91sam9261.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9261.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9261.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9261.c
++++ b/arch/arm/mach-at91/at91sam9261.c
@@ -11,12 +11,14 @@
*/
@@ -996,9 +987,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261.c linux-2.6/arch/ar
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9261_devices.c
++++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -24,7 +24,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/at91sam9261.h>
@@ -1116,9 +1106,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263.c linux-2.6/arch/arm/mach-at91/at91sam9263.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9263.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9263.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9263.c
++++ b/arch/arm/mach-at91/at91sam9263.c
@@ -11,12 +11,14 @@
*/
@@ -1154,9 +1143,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263.c linux-2.6/arch/ar
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
/* Init clock subsystem */
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c 2008-04-25 21:16:23.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9263_devices.c
++++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -22,8 +22,8 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
@@ -1297,9 +1285,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam926x_time.c linux-2.6/arch/arm/mach-at91/at91sam926x_time.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam926x_time.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam926x_time.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam926x_time.c
++++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -1,23 +1,20 @@
/*
- * linux/arch/arm/mach-at91/at91sam926x_time.c
@@ -1534,9 +1521,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam926x_time.c linux-2.6/ar
+ .resume = at91sam926x_pit_reset,
};
-
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl.c linux-2.6/arch/arm/mach-at91/at91sam9rl.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9rl.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9rl.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9rl.c
++++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -10,6 +10,7 @@
*/
@@ -1573,9 +1559,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl.c linux-2.6/arch/arm
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
/* Init clock subsystem */
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c 2008-05-02 00:52:36.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9rl_devices.c
++++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -20,12 +20,107 @@
#include <asm/arch/gpio.h>
#include <asm/arch/at91sam9rl.h>
@@ -1873,9 +1858,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cam60.c linux-2.6/arch/arm/mach-at91/board-cam60.c
---- linux-2.6.25/arch/arm/mach-at91/board-cam60.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-cam60.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-cam60.c
@@ -0,0 +1,180 @@
+/*
+ * KwikByte CAM60 (KB9260)
@@ -2057,9 +2041,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cam60.c linux-2.6/arch/ar
+ .init_irq = cam60_init_irq,
+ .init_machine = cam60_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/arm/mach-at91/board-cap9adk.c
---- linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-cap9adk.c 2008-05-05 22:01:39.000000000 +0200
+--- a/arch/arm/mach-at91/board-cap9adk.c
++++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -36,16 +36,14 @@
#include <asm/hardware.h>
#include <asm/setup.h>
@@ -2119,9 +2102,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/
at91_add_device_lcdc(&cap9adk_lcdc_data);
/* AC97 */
at91_add_device_ac97(&cap9adk_ac97_data);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-carmeva.c linux-2.6/arch/arm/mach-at91/board-carmeva.c
---- linux-2.6.25/arch/arm/mach-at91/board-carmeva.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-carmeva.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/board-carmeva.c
++++ b/arch/arm/mach-at91/board-carmeva.c
@@ -40,24 +40,21 @@
#include "generic.h"
@@ -2197,9 +2179,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-carmeva.c linux-2.6/arch/
}
MACHINE_START(CARMEVA, "Carmeva")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-chub.c linux-2.6/arch/arm/mach-at91/board-chub.c
---- linux-2.6.25/arch/arm/mach-at91/board-chub.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-chub.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-chub.c
@@ -0,0 +1,132 @@
+/*
+ * linux/arch/arm/mach-at91/board-chub.c
@@ -2333,9 +2314,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-chub.c linux-2.6/arch/arm
+ .init_irq = chub_init_irq,
+ .init_machine = chub_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb337.c linux-2.6/arch/arm/mach-at91/board-csb337.c
---- linux-2.6.25/arch/arm/mach-at91/board-csb337.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-csb337.c 2008-05-02 00:05:42.000000000 +0200
+--- a/arch/arm/mach-at91/board-csb337.c
++++ b/arch/arm/mach-at91/board-csb337.c
@@ -61,6 +61,7 @@
/* Setup the LEDs */
@@ -2368,9 +2348,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb337.c linux-2.6/arch/a
};
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb637.c linux-2.6/arch/arm/mach-at91/board-csb637.c
---- linux-2.6.25/arch/arm/mach-at91/board-csb637.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-csb637.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/board-csb637.c
++++ b/arch/arm/mach-at91/board-csb637.c
@@ -40,27 +40,16 @@
#include "generic.h"
@@ -2423,9 +2402,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb637.c linux-2.6/arch/a
/* Serial */
at91_add_device_serial();
/* Ethernet */
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/mach-at91/board-dk.c
---- linux-2.6.25/arch/arm/mach-at91/board-dk.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-dk.c 2008-05-03 00:44:06.000000000 +0200
+--- a/arch/arm/mach-at91/board-dk.c
++++ b/arch/arm/mach-at91/board-dk.c
@@ -25,6 +25,7 @@
#include <linux/init.h>
#include <linux/mm.h>
@@ -2680,9 +2658,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/m
}
MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-eb9200.c linux-2.6/arch/arm/mach-at91/board-eb9200.c
---- linux-2.6.25/arch/arm/mach-at91/board-eb9200.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-eb9200.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/board-eb9200.c
++++ b/arch/arm/mach-at91/board-eb9200.c
@@ -40,24 +40,24 @@
#include "generic.h"
@@ -2721,9 +2698,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-eb9200.c linux-2.6/arch/a
}
static void __init eb9200_init_irq(void)
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ecbat91.c linux-2.6/arch/arm/mach-at91/board-ecbat91.c
---- linux-2.6.25/arch/arm/mach-at91/board-ecbat91.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-ecbat91.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -0,0 +1,178 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
@@ -2903,9 +2879,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ecbat91.c linux-2.6/arch/
+ .init_irq = ecb_at91init_irq,
+ .init_machine = ecb_at91board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/mach-at91/board-ek.c
---- linux-2.6.25/arch/arm/mach-at91/board-ek.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-ek.c 2008-05-03 00:44:38.000000000 +0200
+--- a/arch/arm/mach-at91/board-ek.c
++++ b/arch/arm/mach-at91/board-ek.c
@@ -25,6 +25,7 @@
#include <linux/init.h>
#include <linux/mm.h>
@@ -3157,9 +3132,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/m
}
MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-homematic.c linux-2.6/arch/arm/mach-at91/board-homematic.c
---- linux-2.6.25/arch/arm/mach-at91/board-homematic.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-homematic.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-homematic.c
@@ -0,0 +1,163 @@
+/*
+ * linux/arch/arm/mach-at91/board-homematic.c
@@ -3324,9 +3298,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-homematic.c linux-2.6/arc
+ .init_irq = homematic_init_irq,
+ .init_machine = homematic_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/arm/mach-at91/board-kb9202.c
---- linux-2.6.25/arch/arm/mach-at91/board-kb9202.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-kb9202.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/board-kb9202.c
++++ b/arch/arm/mach-at91/board-kb9202.c
@@ -37,19 +37,10 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
@@ -3430,9 +3403,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/a
}
MACHINE_START(KB9200, "KB920x")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-qil-a9260.c linux-2.6/arch/arm/mach-at91/board-qil-a9260.c
---- linux-2.6.25/arch/arm/mach-at91/board-qil-a9260.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-qil-a9260.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -0,0 +1,255 @@
+/*
+ * linux/arch/arm/mach-at91/board-qil-a9260.c
@@ -3689,9 +3661,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-qil-a9260.c linux-2.6/arc
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9-l9260.c linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c
---- linux-2.6.25/arch/arm/mach-at91/board-sam9-l9260.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -0,0 +1,199 @@
+/*
+ * linux/arch/arm/mach-at91/board-sam9-l9260.c
@@ -3892,9 +3863,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9-l9260.c linux-2.6/ar
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arch/arm/mach-at91/board-sam9260ek.c
---- linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9260ek.c 2008-05-01 23:56:24.000000000 +0200
+--- a/arch/arm/mach-at91/board-sam9260ek.c
++++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -25,6 +25,10 @@
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -4087,9 +4057,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arc
}
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arch/arm/mach-at91/board-sam9261ek.c
---- linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9261ek.c 2008-05-01 23:53:20.000000000 +0200
+--- a/arch/arm/mach-at91/board-sam9261ek.c
++++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -26,6 +26,8 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
@@ -4296,9 +4265,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arc
}
MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arch/arm/mach-at91/board-sam9263ek.c
---- linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9263ek.c 2008-05-01 23:53:20.000000000 +0200
+--- a/arch/arm/mach-at91/board-sam9263ek.c
++++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -43,29 +43,24 @@
#include <asm/arch/board.h>
@@ -4378,9 +4346,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arc
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch/arm/mach-at91/board-sam9rlek.c
---- linux-2.6.25/arch/arm/mach-at91/board-sam9rlek.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9rlek.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/board-sam9rlek.c
++++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -29,29 +29,24 @@
#include <asm/arch/board.h>
@@ -4454,9 +4421,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch
}
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-tms.c linux-2.6/arch/arm/mach-at91/board-tms.c
---- linux-2.6.25/arch/arm/mach-at91/board-tms.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-tms.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-tms.c
@@ -0,0 +1,198 @@
+/*
+* linux/arch/arm/mach-at91/board-tms.c
@@ -4656,9 +4622,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-tms.c linux-2.6/arch/arm/
+ .init_irq = tms_init_irq,
+ .init_machine = tms_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-tt9200.c linux-2.6/arch/arm/mach-at91/board-tt9200.c
---- linux-2.6.25/arch/arm/mach-at91/board-tt9200.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-tt9200.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-tt9200.c
@@ -0,0 +1,192 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-tt9200.c
@@ -4852,9 +4817,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-tt9200.c linux-2.6/arch/a
+ .init_irq = tt9200_init_irq,
+ .init_machine = tt9200_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-usb-a9260.c linux-2.6/arch/arm/mach-at91/board-usb-a9260.c
---- linux-2.6.25/arch/arm/mach-at91/board-usb-a9260.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-usb-a9260.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -0,0 +1,215 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a9260.c
@@ -5071,9 +5035,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-usb-a9260.c linux-2.6/arc
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-usb-a9263.c linux-2.6/arch/arm/mach-at91/board-usb-a9263.c
---- linux-2.6.25/arch/arm/mach-at91/board-usb-a9263.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-usb-a9263.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -0,0 +1,230 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a9263.c
@@ -5305,9 +5268,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-usb-a9263.c linux-2.6/arc
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach-at91/clock.c
---- linux-2.6.25/arch/arm/mach-at91/clock.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/clock.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/clock.c
++++ b/arch/arm/mach-at91/clock.c
@@ -32,6 +32,7 @@
#include <asm/arch/cpu.h>
@@ -5433,9 +5395,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach
/* MCK and CPU clock are "always on" */
clk_enable(&mck);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/generic.h linux-2.6/arch/arm/mach-at91/generic.h
---- linux-2.6.25/arch/arm/mach-at91/generic.h 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/generic.h 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/generic.h
++++ b/arch/arm/mach-at91/generic.h
@@ -41,6 +41,7 @@
/* Power Management */
extern void at91_irq_suspend(void);
@@ -5444,9 +5405,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/generic.h linux-2.6/arch/arm/ma
/* GPIO */
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/gpio.c linux-2.6/arch/arm/mach-at91/gpio.c
---- linux-2.6.25/arch/arm/mach-at91/gpio.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/gpio.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/gpio.c
++++ b/arch/arm/mach-at91/gpio.c
@@ -490,7 +490,8 @@
/*--------------------------------------------------------------------------*/
@@ -5465,9 +5425,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/gpio.c linux-2.6/arch/arm/mach-
if (last && last->id == data->id)
last->next = data;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/ics1523.c linux-2.6/arch/arm/mach-at91/ics1523.c
---- linux-2.6.25/arch/arm/mach-at91/ics1523.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/ics1523.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/ics1523.c
@@ -0,0 +1,208 @@
+/*
+ * arch/arm/mach-at91rm9200/ics1523.c
@@ -5677,9 +5636,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/ics1523.c linux-2.6/arch/arm/ma
+
+ return ack;
+}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at91/pm.c
---- linux-2.6.25/arch/arm/mach-at91/pm.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/pm.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
@@ -26,12 +26,144 @@
#include <asm/mach-types.h>
@@ -5940,9 +5898,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at
return 0;
}
arch_initcall(at91_pm_init);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm_slowclock.S linux-2.6/arch/arm/mach-at91/pm_slowclock.S
---- linux-2.6.25/arch/arm/mach-at91/pm_slowclock.S 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/pm_slowclock.S 2008-05-03 01:00:33.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -0,0 +1,283 @@
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
@@ -6227,9 +6184,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm_slowclock.S linux-2.6/arch/a
+
+ENTRY(at91_slow_clock_sz)
+ .word .-at91_slow_clock
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/Makefile linux-2.6/arch/arm/mach-ks8695/Makefile
---- linux-2.6.25/arch/arm/mach-ks8695/Makefile 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-ks8695/Makefile 2007-12-31 15:04:45.000000000 +0200
+--- a/arch/arm/mach-ks8695/Makefile
++++ b/arch/arm/mach-ks8695/Makefile
@@ -11,5 +11,8 @@
# PCI support is optional
obj-$(CONFIG_PCI) += pci.o
@@ -6239,9 +6195,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/Makefile linux-2.6/arch/arm/m
+
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/devices.c linux-2.6/arch/arm/mach-ks8695/devices.c
---- linux-2.6.25/arch/arm/mach-ks8695/devices.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-ks8695/devices.c 2007-12-31 10:43:55.000000000 +0200
+--- a/arch/arm/mach-ks8695/devices.c
++++ b/arch/arm/mach-ks8695/devices.c
@@ -176,6 +176,27 @@
#endif
@@ -6270,9 +6225,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/devices.c linux-2.6/arch/arm/
/* -------------------------------------------------------------------- */
/*
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/gpio.c linux-2.6/arch/arm/mach-ks8695/gpio.c
---- linux-2.6.25/arch/arm/mach-ks8695/gpio.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-ks8695/gpio.c 2007-12-31 14:49:20.000000000 +0200
+--- a/arch/arm/mach-ks8695/gpio.c
++++ b/arch/arm/mach-ks8695/gpio.c
@@ -136,9 +136,9 @@
/* set line state */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
@@ -6306,9 +6260,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/gpio.c linux-2.6/arch/arm/mac
}
EXPORT_SYMBOL(gpio_get_value);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/leds.c linux-2.6/arch/arm/mach-ks8695/leds.c
---- linux-2.6.25/arch/arm/mach-ks8695/leds.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-ks8695/leds.c 2007-12-31 15:18:25.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-ks8695/leds.c
@@ -0,0 +1,94 @@
+/*
+ * LED driver for KS8695-based boards.
@@ -6404,9 +6357,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/leds.c linux-2.6/arch/arm/mac
+}
+
+__initcall(leds_init);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/pci.c linux-2.6/arch/arm/mach-ks8695/pci.c
---- linux-2.6.25/arch/arm/mach-ks8695/pci.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-ks8695/pci.c 2008-05-08 22:03:41.000000000 +0200
+--- a/arch/arm/mach-ks8695/pci.c
++++ b/arch/arm/mach-ks8695/pci.c
@@ -141,7 +141,7 @@
.write = ks8695_pci_writeconfig,
};
@@ -6416,9 +6368,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/pci.c linux-2.6/arch/arm/mach
{
return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys);
}
-diff -urN -x CVS linux-2.6.25/drivers/char/Kconfig linux-2.6/drivers/char/Kconfig
---- linux-2.6.25/drivers/char/Kconfig 2008-05-03 00:15:47.000000000 +0200
-+++ linux-2.6/drivers/char/Kconfig 2008-03-09 15:14:46.000000000 +0200
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
@@ -1056,5 +1056,21 @@
source "drivers/s390/char/Kconfig"
@@ -6441,9 +6392,8 @@ diff -urN -x CVS linux-2.6.25/drivers/char/Kconfig linux-2.6/drivers/char/Kconfi
+
endmenu
-diff -urN -x CVS linux-2.6.25/drivers/char/Makefile linux-2.6/drivers/char/Makefile
---- linux-2.6.25/drivers/char/Makefile 2008-05-03 00:15:47.000000000 +0200
-+++ linux-2.6/drivers/char/Makefile 2008-03-09 15:14:46.000000000 +0200
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
@@ -98,6 +98,8 @@
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_TB0219) += tb0219.o
@@ -6453,9 +6403,8 @@ diff -urN -x CVS linux-2.6.25/drivers/char/Makefile linux-2.6/drivers/char/Makef
obj-$(CONFIG_MWAVE) += mwave/
obj-$(CONFIG_AGP) += agp/
-diff -urN -x CVS linux-2.6.25/drivers/char/at91_spi.c linux-2.6/drivers/char/at91_spi.c
---- linux-2.6.25/drivers/char/at91_spi.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/char/at91_spi.c 2008-04-18 17:38:01.000000000 +0200
+--- /dev/null
++++ b/drivers/char/at91_spi.c
@@ -0,0 +1,337 @@
+/*
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
@@ -6794,9 +6743,8 @@ diff -urN -x CVS linux-2.6.25/drivers/char/at91_spi.c linux-2.6/drivers/char/at9
+MODULE_AUTHOR("Andrew Victor")
+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
+MODULE_ALIAS("platform:at91_spi");
-diff -urN -x CVS linux-2.6.25/drivers/char/at91_spidev.c linux-2.6/drivers/char/at91_spidev.c
---- linux-2.6.25/drivers/char/at91_spidev.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/char/at91_spidev.c 2007-12-31 15:18:43.000000000 +0200
+--- /dev/null
++++ b/drivers/char/at91_spidev.c
@@ -0,0 +1,233 @@
+/*
+ * User-space interface to the SPI bus on Atmel AT91RM9200
@@ -7031,9 +6979,8 @@ diff -urN -x CVS linux-2.6.25/drivers/char/at91_spidev.c linux-2.6/drivers/char/
+MODULE_LICENSE("GPL")
+MODULE_AUTHOR("Andrew Victor")
+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
-diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/Kconfig linux-2.6/drivers/i2c/busses/Kconfig
---- linux-2.6.25/drivers/i2c/busses/Kconfig 2008-05-03 00:15:47.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/Kconfig 2008-04-02 22:11:28.000000000 +0200
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
@@ -88,6 +88,14 @@
to support combined I2C messages. Use the i2c-gpio driver
unless your system can cope with those limitations.
@@ -7064,9 +7011,8 @@ diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/Kconfig linux-2.6/drivers/i2c/b
config I2C_PCA_ISA
tristate "PCA9564 on an ISA bus"
depends on ISA
-diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/Makefile linux-2.6/drivers/i2c/busses/Makefile
---- linux-2.6.25/drivers/i2c/busses/Makefile 2008-05-03 00:15:47.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/Makefile 2008-03-09 15:14:46.000000000 +0200
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
@@ -7075,9 +7021,8 @@ diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/Makefile linux-2.6/drivers/i2c/
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
-diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-at91.c linux-2.6/drivers/i2c/busses/i2c-at91.c
---- linux-2.6.25/drivers/i2c/busses/i2c-at91.c 2008-05-03 00:15:35.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/i2c-at91.c 2008-01-16 13:15:34.000000000 +0200
+--- a/drivers/i2c/busses/i2c-at91.c
++++ b/drivers/i2c/busses/i2c-at91.c
@@ -31,8 +31,11 @@
#include <asm/arch/board.h>
#include <asm/arch/cpu.h>
@@ -7118,9 +7063,8 @@ diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-at91.c linux-2.6/drivers/i2
}
at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
-diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-pca.c linux-2.6/drivers/i2c/busses/i2c-pca.c
---- linux-2.6.25/drivers/i2c/busses/i2c-pca.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/i2c-pca.c 2007-12-31 15:18:43.000000000 +0200
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-pca.c
@@ -0,0 +1,213 @@
+/*
+ * Platform driver for PCA9564 I2C bus controller.
@@ -7335,9 +7279,8 @@ diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-pca.c linux-2.6/drivers/i2c
+MODULE_AUTHOR("Andrew Victor");
+MODULE_DESCRIPTION("PCA9564 platform driver");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.25/drivers/mmc/host/at91_mci.c linux-2.6/drivers/mmc/host/at91_mci.c
---- linux-2.6.25/drivers/mmc/host/at91_mci.c 2008-05-03 00:15:48.000000000 +0200
-+++ linux-2.6/drivers/mmc/host/at91_mci.c 2008-04-18 17:32:40.000000000 +0200
+--- a/drivers/mmc/host/at91_mci.c
++++ b/drivers/mmc/host/at91_mci.c
@@ -659,13 +659,14 @@
/* maybe switch power to the card */
if (host->board->vcc_pin) {
@@ -7360,9 +7303,8 @@ diff -urN -x CVS linux-2.6.25/drivers/mmc/host/at91_mci.c linux-2.6/drivers/mmc/
}
}
}
-diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/Kconfig linux-2.6/drivers/mtd/devices/Kconfig
---- linux-2.6.25/drivers/mtd/devices/Kconfig 2008-05-03 00:15:36.000000000 +0200
-+++ linux-2.6/drivers/mtd/devices/Kconfig 2007-12-31 10:44:25.000000000 +0200
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
@@ -270,5 +270,17 @@
LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
you have managed to wipe the first block.
@@ -7382,17 +7324,15 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/Kconfig linux-2.6/drivers/mtd/
+ Always add the whole DataFlash device when using MTD partitions.
+endmenu
-diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/Makefile linux-2.6/drivers/mtd/devices/Makefile
---- linux-2.6.25/drivers/mtd/devices/Makefile 2008-05-03 00:15:36.000000000 +0200
-+++ linux-2.6/drivers/mtd/devices/Makefile 2007-12-31 10:48:27.000000000 +0200
+--- a/drivers/mtd/devices/Makefile
++++ b/drivers/mtd/devices/Makefile
@@ -17,3 +17,4 @@
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
-diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/at91_dataflash.c linux-2.6/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.25/drivers/mtd/devices/at91_dataflash.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/mtd/devices/at91_dataflash.c 2007-12-31 15:18:43.000000000 +0200
+--- /dev/null
++++ b/drivers/mtd/devices/at91_dataflash.c
@@ -0,0 +1,673 @@
+/*
+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
@@ -8067,9 +8007,8 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/at91_dataflash.c linux-2.6/dri
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrew Victor");
+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
-diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/Kconfig linux-2.6/drivers/mtd/nand/Kconfig
---- linux-2.6.25/drivers/mtd/nand/Kconfig 2008-05-03 00:15:48.000000000 +0200
-+++ linux-2.6/drivers/mtd/nand/Kconfig 2008-04-18 17:52:53.000000000 +0200
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
@@ -273,12 +273,53 @@
If you say "m", the module will be called "cs553x_nand.ko".
@@ -8125,9 +8064,8 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/Kconfig linux-2.6/drivers/mtd/nan
config MTD_NAND_CM_X270
tristate "Support for NAND Flash on CM-X270 modules"
depends on MTD_NAND && MACH_ARMCORE
-diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd/nand/at91_nand.c
---- linux-2.6.25/drivers/mtd/nand/at91_nand.c 2008-05-03 00:15:48.000000000 +0200
-+++ linux-2.6/drivers/mtd/nand/at91_nand.c 2008-05-03 00:53:39.000000000 +0200
+--- a/drivers/mtd/nand/at91_nand.c
++++ b/drivers/mtd/nand/at91_nand.c
@@ -9,6 +9,15 @@
* Derived from drivers/mtd/spia.c
* Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
@@ -8677,9 +8615,8 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd
MODULE_AUTHOR("Rick Bronson");
-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9 / AT91CAP9");
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/Kconfig linux-2.6/drivers/net/arm/Kconfig
---- linux-2.6.25/drivers/net/arm/Kconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/net/arm/Kconfig 2008-03-04 21:52:40.000000000 +0200
+--- a/drivers/net/arm/Kconfig
++++ b/drivers/net/arm/Kconfig
@@ -47,3 +47,10 @@
help
This is a driver for the ethernet hardware included in EP93xx CPUs.
@@ -8691,17 +8628,15 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/Kconfig linux-2.6/drivers/net/arm/
+ help
+ If you wish to compile a kernel for an KS8695-based board
+ and enable Ethernet support, then select this option.
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/Makefile linux-2.6/drivers/net/arm/Makefile
---- linux-2.6.25/drivers/net/arm/Makefile 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/net/arm/Makefile 2008-03-04 21:51:41.000000000 +0200
+--- a/drivers/net/arm/Makefile
++++ b/drivers/net/arm/Makefile
@@ -9,3 +9,4 @@
obj-$(CONFIG_ARM_ETHER1) += ether1.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
+obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695_ether.o
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net/arm/at91_ether.c
---- linux-2.6.25/drivers/net/arm/at91_ether.c 2008-05-03 00:15:48.000000000 +0200
-+++ linux-2.6/drivers/net/arm/at91_ether.c 2008-05-08 21:47:22.000000000 +0200
+--- a/drivers/net/arm/at91_ether.c
++++ b/drivers/net/arm/at91_ether.c
@@ -220,7 +220,7 @@
if (!(phy & (1 << 0)))
goto done;
@@ -8892,9 +8827,8 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net
MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
MODULE_AUTHOR("Andrew Victor");
+MODULE_ALIAS("platform:" DRV_NAME);
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.h linux-2.6/drivers/net/arm/at91_ether.h
---- linux-2.6.25/drivers/net/arm/at91_ether.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/net/arm/at91_ether.h 2008-05-08 21:47:31.000000000 +0200
+--- a/drivers/net/arm/at91_ether.h
++++ b/drivers/net/arm/at91_ether.h
@@ -48,6 +48,9 @@
/* Altima AC101L PHY */
#define MII_AC101L_ID 0x00225520
@@ -8913,9 +8847,8 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.h linux-2.6/drivers/net
struct mii_if_info mii; /* ethtool support */
struct at91_eth_data board_data; /* board-specific configuration */
struct clk *ether_clk; /* clock */
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/ks8695_ether.c linux-2.6/drivers/net/arm/ks8695_ether.c
---- linux-2.6.25/drivers/net/arm/ks8695_ether.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/net/arm/ks8695_ether.c 2008-05-08 21:52:35.000000000 +0200
+--- /dev/null
++++ b/drivers/net/arm/ks8695_ether.c
@@ -0,0 +1,1009 @@
+/*
+ * Ethernet driver for the Kendin/Micrel KS8695.
@@ -9926,9 +9859,8 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/ks8695_ether.c linux-2.6/drivers/n
+MODULE_DESCRIPTION("KS8695 Ethernet driver");
+MODULE_AUTHOR("Andrew Victor");
+MODULE_ALIAS("platform:" DRV_NAME);
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/ks8695_ether.h linux-2.6/drivers/net/arm/ks8695_ether.h
---- linux-2.6.25/drivers/net/arm/ks8695_ether.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/net/arm/ks8695_ether.h 2008-05-08 21:51:23.000000000 +0200
+--- /dev/null
++++ b/drivers/net/arm/ks8695_ether.h
@@ -0,0 +1,92 @@
+/*
+ * Ethernet driver for the Micrel/Kendin KS8695 (Centaur)
@@ -10022,9 +9954,8 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/ks8695_ether.h linux-2.6/drivers/n
+};
+
+#endif
-diff -urN -x CVS linux-2.6.25/drivers/rtc/Kconfig linux-2.6/drivers/rtc/Kconfig
---- linux-2.6.25/drivers/rtc/Kconfig 2008-05-03 00:15:49.000000000 +0200
-+++ linux-2.6/drivers/rtc/Kconfig 2008-04-15 21:48:11.000000000 +0200
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
@@ -487,12 +487,12 @@
this is powered by the backup power supply.
@@ -10042,9 +9973,8 @@ diff -urN -x CVS linux-2.6.25/drivers/rtc/Kconfig linux-2.6/drivers/rtc/Kconfig
(On AT91SAM9rl chips you probably want to use the dedicated RTC
module and leave the RTT available for other uses.)
-diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91rm9200.c linux-2.6/drivers/rtc/rtc-at91rm9200.c
---- linux-2.6.25/drivers/rtc/rtc-at91rm9200.c 2008-05-03 00:15:49.000000000 +0200
-+++ linux-2.6/drivers/rtc/rtc-at91rm9200.c 2008-04-25 23:15:05.000000000 +0200
+--- a/drivers/rtc/rtc-at91rm9200.c
++++ b/drivers/rtc/rtc-at91rm9200.c
@@ -29,9 +29,6 @@
#include <linux/completion.h>
@@ -10068,9 +9998,8 @@ diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91rm9200.c linux-2.6/drivers/rtc
rtc = rtc_device_register(pdev->name, &pdev->dev,
&at91_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
-diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/rtc-at91sam9.c
---- linux-2.6.25/drivers/rtc/rtc-at91sam9.c 2008-05-03 00:15:49.000000000 +0200
-+++ linux-2.6/drivers/rtc/rtc-at91sam9.c 2008-05-05 22:01:39.000000000 +0200
+--- a/drivers/rtc/rtc-at91sam9.c
++++ b/drivers/rtc/rtc-at91sam9.c
@@ -21,6 +21,7 @@
#include <asm/mach/time.h>
@@ -10110,12 +10039,11 @@ diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/r
platform_set_drvdata(pdev, rtc);
rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
rtc->rtt += r->start;
-diff -urN -x CVS linux-2.6.25/drivers/spi/Kconfig linux-2.6/drivers/spi/Kconfig
---- linux-2.6.25/drivers/spi/Kconfig 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/spi/Kconfig 2008-03-09 15:14:53.000000000 +0200
-@@ -105,6 +105,15 @@
- inexpensive battery powered microcontroller evaluation board.
- This same cable can be used to flash new firmware.
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -113,6 +113,15 @@
+
+ If unsure, say N.
+config SPI_AT91
+ tristate "AT91RM9200 Bitbang SPI Master"
@@ -10129,9 +10057,8 @@ diff -urN -x CVS linux-2.6.25/drivers/spi/Kconfig linux-2.6/drivers/spi/Kconfig
config SPI_IMX
tristate "Freescale iMX SPI controller"
depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
-diff -urN -x CVS linux-2.6.25/drivers/spi/Makefile linux-2.6/drivers/spi/Makefile
---- linux-2.6.25/drivers/spi/Makefile 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/spi/Makefile 2008-03-09 17:54:27.000000000 +0200
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
@@ -10140,9 +10067,8 @@ diff -urN -x CVS linux-2.6.25/drivers/spi/Makefile linux-2.6/drivers/spi/Makefil
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
-diff -urN -x CVS linux-2.6.25/drivers/spi/spi_at91_bitbang.c linux-2.6/drivers/spi/spi_at91_bitbang.c
---- linux-2.6.25/drivers/spi/spi_at91_bitbang.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/spi/spi_at91_bitbang.c 2008-04-18 17:38:19.000000000 +0200
+--- /dev/null
++++ b/drivers/spi/spi_at91_bitbang.c
@@ -0,0 +1,208 @@
+/*
+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
@@ -10352,9 +10278,8 @@ diff -urN -x CVS linux-2.6.25/drivers/spi/spi_at91_bitbang.c linux-2.6/drivers/s
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_spi");
-diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/Kconfig linux-2.6/drivers/usb/gadget/Kconfig
---- linux-2.6.25/drivers/usb/gadget/Kconfig 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/usb/gadget/Kconfig 2008-04-18 19:23:34.000000000 +0200
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
@@ -118,10 +118,10 @@
config USB_GADGET_ATMEL_USBA
boolean "Atmel USBA"
@@ -10368,9 +10293,8 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/Kconfig linux-2.6/drivers/usb/g
config USB_ATMEL_USBA
tristate
-diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/at91_udc.c linux-2.6/drivers/usb/gadget/at91_udc.c
---- linux-2.6.25/drivers/usb/gadget/at91_udc.c 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/usb/gadget/at91_udc.c 2008-04-15 21:48:12.000000000 +0200
+--- a/drivers/usb/gadget/at91_udc.c
++++ b/drivers/usb/gadget/at91_udc.c
@@ -1827,7 +1827,7 @@
*/
if ((!udc->suspended && udc->addr)
@@ -10380,9 +10304,8 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/at91_udc.c linux-2.6/drivers/us
pullup(udc, 0);
wake = 0;
} else
-diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/drivers/usb/gadget/atmel_usba_udc.c
---- linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/usb/gadget/atmel_usba_udc.c 2008-05-03 01:07:46.000000000 +0200
+--- a/drivers/usb/gadget/atmel_usba_udc.c
++++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/usb/ch9.h>
@@ -10633,9 +10556,8 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv
usba_ep_cleanup_debugfs(&usba_ep[i]);
usba_cleanup_debugfs(udc);
-diff -urN -x CVS linux-2.6.25/drivers/usb/host/ohci-at91.c linux-2.6/drivers/usb/host/ohci-at91.c
---- linux-2.6.25/drivers/usb/host/ohci-at91.c 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/usb/host/ohci-at91.c 2008-04-15 21:48:12.000000000 +0200
+--- a/drivers/usb/host/ohci-at91.c
++++ b/drivers/usb/host/ohci-at91.c
@@ -330,7 +330,7 @@
*
* REVISIT: some boards will be able to turn VBUS off...
@@ -10645,9 +10567,8 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/host/ohci-at91.c linux-2.6/drivers/usb
ohci_usb_reset (ohci);
at91_stop_clock();
}
-diff -urN -x CVS linux-2.6.25/drivers/video/Kconfig linux-2.6/drivers/video/Kconfig
---- linux-2.6.25/drivers/video/Kconfig 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/video/Kconfig 2008-04-02 22:11:30.000000000 +0200
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
@@ -889,6 +889,17 @@
framebuffer. Product specs at
<http://www.erd.epson.com/vdc/html/products.htm>.
@@ -10666,9 +10587,8 @@ diff -urN -x CVS linux-2.6.25/drivers/video/Kconfig linux-2.6/drivers/video/Kcon
config FB_S1D13XXX
tristate "Epson S1D13XXX framebuffer support"
depends on FB
-diff -urN -x CVS linux-2.6.25/drivers/video/Makefile linux-2.6/drivers/video/Makefile
---- linux-2.6.25/drivers/video/Makefile 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/video/Makefile 2008-04-02 22:11:30.000000000 +0200
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
@@ -87,7 +87,8 @@
obj-$(CONFIG_FB_SA1100) += sa1100fb.o
obj-$(CONFIG_FB_HIT) += hitfb.o
@@ -10679,9 +10599,8 @@ diff -urN -x CVS linux-2.6.25/drivers/video/Makefile linux-2.6/drivers/video/Mak
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-diff -urN -x CVS linux-2.6.25/drivers/video/atmel_lcdfb.c linux-2.6/drivers/video/atmel_lcdfb.c
---- linux-2.6.25/drivers/video/atmel_lcdfb.c 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/video/atmel_lcdfb.c 2008-04-03 00:27:47.000000000 +0200
+--- a/drivers/video/atmel_lcdfb.c
++++ b/drivers/video/atmel_lcdfb.c
@@ -31,7 +31,7 @@
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
#define ATMEL_LCDC_DMA_BURST_LEN 8
@@ -10740,9 +10659,8 @@ diff -urN -x CVS linux-2.6.25/drivers/video/atmel_lcdfb.c linux-2.6/drivers/vide
.driver = {
.name = "atmel_lcdfb",
.owner = THIS_MODULE,
-diff -urN -x CVS linux-2.6.25/drivers/video/backlight/Kconfig linux-2.6/drivers/video/backlight/Kconfig
---- linux-2.6.25/drivers/video/backlight/Kconfig 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/video/backlight/Kconfig 2008-03-09 18:51:50.000000000 +0200
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
@@ -112,3 +112,11 @@
help
If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
@@ -10755,17 +10673,15 @@ diff -urN -x CVS linux-2.6.25/drivers/video/backlight/Kconfig linux-2.6/drivers/
+ help
+ If you have a KwikByte KB9202 board, say Y to enable the
+ backlight driver.
-diff -urN -x CVS linux-2.6.25/drivers/video/backlight/Makefile linux-2.6/drivers/video/backlight/Makefile
---- linux-2.6.25/drivers/video/backlight/Makefile 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/video/backlight/Makefile 2008-03-09 15:14:55.000000000 +0200
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
@@ -10,3 +10,4 @@
obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
+obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o
-diff -urN -x CVS linux-2.6.25/drivers/video/backlight/kb920x_bl.c linux-2.6/drivers/video/backlight/kb920x_bl.c
---- linux-2.6.25/drivers/video/backlight/kb920x_bl.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/video/backlight/kb920x_bl.c 2008-03-09 21:41:20.000000000 +0200
+--- /dev/null
++++ b/drivers/video/backlight/kb920x_bl.c
@@ -0,0 +1,164 @@
+/*
+ * Backlight Driver for KB9202
@@ -10931,9 +10847,8 @@ diff -urN -x CVS linux-2.6.25/drivers/video/backlight/kb920x_bl.c linux-2.6/driv
+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
+MODULE_DESCRIPTION("KB9202 Backlight Driver");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.25/drivers/video/s1d15605fb.c linux-2.6/drivers/video/s1d15605fb.c
---- linux-2.6.25/drivers/video/s1d15605fb.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/video/s1d15605fb.c 2008-05-03 00:36:04.000000000 +0200
+--- /dev/null
++++ b/drivers/video/s1d15605fb.c
@@ -0,0 +1,655 @@
+/*
+ * drivers/video/s1d15605.c
@@ -11590,9 +11505,8 @@ diff -urN -x CVS linux-2.6.25/drivers/video/s1d15605fb.c linux-2.6/drivers/video
+MODULE_AUTHOR("KwikByte");
+MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.25/drivers/watchdog/Kconfig linux-2.6/drivers/watchdog/Kconfig
---- linux-2.6.25/drivers/watchdog/Kconfig 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/watchdog/Kconfig 2008-03-09 15:14:55.000000000 +0200
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
@@ -66,6 +66,14 @@
Watchdog timer embedded into AT91RM9200 chips. This will reboot your
system when the timeout is reached.
@@ -11608,9 +11522,8 @@ diff -urN -x CVS linux-2.6.25/drivers/watchdog/Kconfig linux-2.6/drivers/watchdo
config 21285_WATCHDOG
tristate "DC21285 watchdog"
depends on FOOTBRIDGE
-diff -urN -x CVS linux-2.6.25/drivers/watchdog/Makefile linux-2.6/drivers/watchdog/Makefile
---- linux-2.6.25/drivers/watchdog/Makefile 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/watchdog/Makefile 2008-03-09 15:14:55.000000000 +0200
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
@@ -26,6 +26,7 @@
# ARM Architecture
@@ -11619,9 +11532,8 @@ diff -urN -x CVS linux-2.6.25/drivers/watchdog/Makefile linux-2.6/drivers/watchd
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
obj-$(CONFIG_977_WATCHDOG) += wdt977.o
-diff -urN -x CVS linux-2.6.25/drivers/watchdog/at91sam9_wdt.c linux-2.6/drivers/watchdog/at91sam9_wdt.c
---- linux-2.6.25/drivers/watchdog/at91sam9_wdt.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/watchdog/at91sam9_wdt.c 2008-04-15 21:53:41.000000000 +0200
+--- /dev/null
++++ b/drivers/watchdog/at91sam9_wdt.c
@@ -0,0 +1,259 @@
+/*
+ * Watchdog driver for Atmel AT91SAM9x processors.
@@ -11882,9 +11794,8 @@ diff -urN -x CVS linux-2.6.25/drivers/watchdog/at91sam9_wdt.c linux-2.6/drivers/
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:at91_wdt");
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_ecc.h linux-2.6/include/asm-arm/arch-at91/at91_ecc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_ecc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_ecc.h 2008-05-07 23:49:32.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_ecc.h
++++ b/include/asm-arm/arch-at91/at91_ecc.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_ecc.h
@@ -11927,9 +11838,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_ecc.h linux-2.6/inc
#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_pit.h linux-2.6/include/asm-arm/arch-at91/at91_pit.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_pit.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_pit.h 2008-05-07 23:49:57.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_pit.h
++++ b/include/asm-arm/arch-at91/at91_pit.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_pit.h
@@ -11940,9 +11850,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_pit.h linux-2.6/inc
* Periodic Interval Timer (PIT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_pmc.h linux-2.6/include/asm-arm/arch-at91/at91_pmc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_pmc.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_pmc.h 2008-05-05 22:01:39.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_pmc.h
++++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -23,6 +23,7 @@
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
@@ -12011,9 +11920,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_pmc.h linux-2.6/inc
+#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
+
#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_rstc.h linux-2.6/include/asm-arm/arch-at91/at91_rstc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_rstc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_rstc.h 2008-05-07 23:50:10.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_rstc.h
++++ b/include/asm-arm/arch-at91/at91_rstc.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_rstc.h
@@ -12024,9 +11932,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_rstc.h linux-2.6/in
* Reset Controller (RSTC) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_rtt.h linux-2.6/include/asm-arm/arch-at91/at91_rtt.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_rtt.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_rtt.h 2008-05-07 23:51:11.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_rtt.h
++++ b/include/asm-arm/arch-at91/at91_rtt.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_rtt.h
@@ -12037,9 +11944,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_rtt.h linux-2.6/inc
* Real-time Timer (RTT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_shdwc.h linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_shdwc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h 2008-05-07 23:50:23.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_shdwc.h
++++ b/include/asm-arm/arch-at91/at91_shdwc.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_shdwc.h
@@ -12063,9 +11969,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_shdwc.h linux-2.6/i
+#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */
#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_tsc.h linux-2.6/include/asm-arm/arch-at91/at91_tsc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_tsc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_tsc.h 2008-05-07 23:51:32.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/at91_tsc.h
@@ -0,0 +1,76 @@
+/*
+ * include/asm-arm/arch-at91/at91_tsc.h
@@ -12143,9 +12048,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_tsc.h linux-2.6/inc
+
+#endif
+
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_wdt.h linux-2.6/include/asm-arm/arch-at91/at91_wdt.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_wdt.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_wdt.h 2008-05-07 23:51:43.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_wdt.h
++++ b/include/asm-arm/arch-at91/at91_wdt.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_wdt.h
@@ -12156,9 +12060,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_wdt.h linux-2.6/inc
* Watchdog Timer (WDT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9.h linux-2.6/include/asm-arm/arch-at91/at91cap9.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91cap9.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91cap9.h 2008-05-05 22:01:39.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91cap9.h
++++ b/include/asm-arm/arch-at91/at91cap9.h
@@ -101,7 +101,10 @@
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
@@ -12180,9 +12083,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9.h linux-2.6/inc
#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9_ddrsdr.h linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 2008-05-07 21:33:47.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
@@ -0,0 +1,102 @@
+/*
+ * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
@@ -12286,9 +12188,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9_ddrsdr.h linux-
+
+
+#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9_matrix.h linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91cap9_matrix.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h 2008-04-18 19:20:34.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91cap9_matrix.h
++++ b/include/asm-arm/arch-at91/at91cap9_matrix.h
@@ -106,6 +106,11 @@
#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
@@ -12301,9 +12202,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9_matrix.h linux-
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9260_matrix.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h 2008-05-07 12:07:13.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
++++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -1,6 +1,8 @@
/*
* include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -12313,9 +12213,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9260_matrix.h lin
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9260 datasheet revision B.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9261_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9261_matrix.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9261_matrix.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9261_matrix.h 2008-05-07 12:07:24.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91sam9261_matrix.h
++++ b/include/asm-arm/arch-at91/at91sam9261_matrix.h
@@ -1,6 +1,8 @@
/*
* include/asm-arm/arch-at91/at91sam9261_matrix.h
@@ -12325,9 +12224,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9261_matrix.h lin
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam926x_mc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam926x_mc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h 1970-01-01 02:00:00.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91sam926x_mc.h
++++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam926x_mc.h
@@ -12470,9 +12368,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam926x_mc.h linux-2
-#endif
-
-#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9_sdramc.h linux-2.6/include/asm-arm/arch-at91/at91sam9_sdramc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9_sdramc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9_sdramc.h 2008-05-07 23:51:59.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/at91sam9_sdramc.h
@@ -0,0 +1,86 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9_sdramc.h
@@ -12560,9 +12457,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9_sdramc.h linux-
+
+
+#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9_smc.h linux-2.6/include/asm-arm/arch-at91/at91sam9_smc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9_smc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9_smc.h 2008-05-07 23:52:15.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/at91sam9_smc.h
@@ -0,0 +1,76 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9_smc.h
@@ -12640,9 +12536,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9_smc.h linux-2.6
+#endif
+
+#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9rl.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h 2008-04-18 19:22:02.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91sam9rl.h
++++ b/include/asm-arm/arch-at91/at91sam9rl.h
@@ -110,6 +110,6 @@
#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
@@ -12651,9 +12546,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6/i
+#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/board.h linux-2.6/include/asm-arm/arch-at91/board.h
---- linux-2.6.25/include/asm-arm/arch-at91/board.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/board.h 2008-05-02 00:40:32.000000000 +0200
+--- a/include/asm-arm/arch-at91/board.h
++++ b/include/asm-arm/arch-at91/board.h
@@ -36,6 +36,7 @@
#include <linux/i2c.h>
#include <linux/leds.h>
@@ -12682,9 +12576,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/board.h linux-2.6/includ
/* LEDs */
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/cpu.h linux-2.6/include/asm-arm/arch-at91/cpu.h
---- linux-2.6.25/include/asm-arm/arch-at91/cpu.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/cpu.h 2008-05-05 22:10:58.000000000 +0200
+--- a/include/asm-arm/arch-at91/cpu.h
++++ b/include/asm-arm/arch-at91/cpu.h
@@ -48,6 +48,17 @@
return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
}
@@ -12716,9 +12609,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/cpu.h linux-2.6/include/
#endif
/*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/ics1523.h linux-2.6/include/asm-arm/arch-at91/ics1523.h
---- linux-2.6.25/include/asm-arm/arch-at91/ics1523.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/ics1523.h 2008-01-16 21:24:29.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/ics1523.h
@@ -0,0 +1,154 @@
+//*----------------------------------------------------------------------------
+//* ATMEL Microcontroller Software Support - ROUSSET -
@@ -12874,9 +12766,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/ics1523.h linux-2.6/incl
+int at91_ics1523_init(void);
+
+#endif /* ics1523_h */
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/spi.h linux-2.6/include/asm-arm/arch-at91/spi.h
---- linux-2.6.25/include/asm-arm/arch-at91/spi.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/spi.h 2008-01-16 21:24:29.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/spi.h
@@ -0,0 +1,54 @@
+/*
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
@@ -12932,9 +12823,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/spi.h linux-2.6/include/
+extern int spi_transfer(struct spi_transfer_list* list);
+
+#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/timex.h linux-2.6/include/asm-arm/arch-at91/timex.h
---- linux-2.6.25/include/asm-arm/arch-at91/timex.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/timex.h 2008-04-18 18:30:40.000000000 +0200
+--- a/include/asm-arm/arch-at91/timex.h
++++ b/include/asm-arm/arch-at91/timex.h
@@ -27,14 +27,29 @@
#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
@@ -12966,9 +12856,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/timex.h linux-2.6/includ
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9RL)
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-ks8695/devices.h linux-2.6/include/asm-arm/arch-ks8695/devices.h
---- linux-2.6.25/include/asm-arm/arch-ks8695/devices.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-ks8695/devices.h 2007-12-31 10:44:34.000000000 +0200
+--- a/include/asm-arm/arch-ks8695/devices.h
++++ b/include/asm-arm/arch-ks8695/devices.h
@@ -18,6 +18,11 @@
extern void __init ks8695_add_device_lan(void);
extern void __init ks8695_add_device_hpna(void);
@@ -12981,9 +12870,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-ks8695/devices.h linux-2.6/in
/* PCI */
#define KS8695_MODE_PCI 0
#define KS8695_MODE_MINIPCI 1
-diff -urN -x CVS linux-2.6.25/include/linux/clk.h linux-2.6/include/linux/clk.h
---- linux-2.6.25/include/linux/clk.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/linux/clk.h 2007-12-31 10:44:34.000000000 +0200
+--- a/include/linux/clk.h
++++ b/include/linux/clk.h
@@ -121,4 +121,24 @@
*/
struct clk *clk_get_parent(struct clk *clk);
@@ -13009,9 +12897,8 @@ diff -urN -x CVS linux-2.6.25/include/linux/clk.h linux-2.6/include/linux/clk.h
+int clk_must_disable(struct clk *clk);
+
#endif
-diff -urN -x CVS linux-2.6.25/include/linux/i2c-id.h linux-2.6/include/linux/i2c-id.h
---- linux-2.6.25/include/linux/i2c-id.h 2008-05-03 00:15:52.000000000 +0200
-+++ linux-2.6/include/linux/i2c-id.h 2008-03-09 15:43:48.000000000 +0200
+--- a/include/linux/i2c-id.h
++++ b/include/linux/i2c-id.h
@@ -131,6 +131,7 @@
/* --- PCA 9564 based algorithms */
@@ -13020,9 +12907,8 @@ diff -urN -x CVS linux-2.6.25/include/linux/i2c-id.h linux-2.6/include/linux/i2c
/* --- PowerPC on-chip adapters */
#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */
-diff -urN -x CVS linux-2.6.25/include/linux/usb/atmel_usba_udc.h linux-2.6/include/linux/usb/atmel_usba_udc.h
---- linux-2.6.25/include/linux/usb/atmel_usba_udc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/linux/usb/atmel_usba_udc.h 2008-05-03 00:31:09.000000000 +0200
+--- /dev/null
++++ b/include/linux/usb/atmel_usba_udc.h
@@ -0,0 +1,23 @@
+/*
+* Platform data definitions for Atmel USBA gadget driver.
@@ -13047,9 +12933,8 @@ diff -urN -x CVS linux-2.6.25/include/linux/usb/atmel_usba_udc.h linux-2.6/inclu
+
+#endif /* __LINUX_USB_USBA_H */
+
-diff -urN -x CVS linux-2.6.25/include/video/atmel_lcdc.h linux-2.6/include/video/atmel_lcdc.h
---- linux-2.6.25/include/video/atmel_lcdc.h 2008-05-03 00:15:53.000000000 +0200
-+++ linux-2.6/include/video/atmel_lcdc.h 2008-03-09 15:53:40.000000000 +0200
+--- a/include/video/atmel_lcdc.h
++++ b/include/video/atmel_lcdc.h
@@ -39,6 +39,7 @@
u8 bl_power;
#endif
@@ -13058,9 +12943,8 @@ diff -urN -x CVS linux-2.6.25/include/video/atmel_lcdc.h linux-2.6/include/video
u8 default_bpp;
unsigned int default_lcdcon2;
-diff -urN -x CVS linux-2.6.25/sound/soc/at91/eti_b1_wm8731.c linux-2.6/sound/soc/at91/eti_b1_wm8731.c
---- linux-2.6.25/sound/soc/at91/eti_b1_wm8731.c 2008-05-03 00:15:56.000000000 +0200
-+++ linux-2.6/sound/soc/at91/eti_b1_wm8731.c 2008-03-09 15:15:07.000000000 +0200
+--- a/sound/soc/at91/eti_b1_wm8731.c
++++ b/sound/soc/at91/eti_b1_wm8731.c
@@ -33,8 +33,7 @@
#include <sound/soc.h>
#include <sound/soc-dapm.h>
@@ -13119,9 +13003,8 @@ diff -urN -x CVS linux-2.6.25/sound/soc/at91/eti_b1_wm8731.c linux-2.6/sound/soc
/*
* Set PCK1 parent to PLLB and its rate to 12 Mhz.
-diff -urN -x CVS linux-2.6.25/sound/spi/at73c213.c linux-2.6/sound/spi/at73c213.c
---- linux-2.6.25/sound/spi/at73c213.c 2008-05-03 00:15:56.000000000 +0200
-+++ linux-2.6/sound/spi/at73c213.c 2008-03-09 15:15:07.000000000 +0200
+--- a/sound/spi/at73c213.c
++++ b/sound/spi/at73c213.c
@@ -114,7 +114,11 @@
static struct snd_pcm_hardware snd_at73c213_playback_hw = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
diff --git a/target/linux/at91/patches-2.6.25/001-vlink-machine.patch b/target/linux/at91/patches-2.6.25/001-vlink-machine.patch
index 9f5673b..ee23cc8 100644
--- a/target/linux/at91/patches-2.6.25/001-vlink-machine.patch
+++ b/target/linux/at91/patches-2.6.25/001-vlink-machine.patch
@@ -1,5 +1,5 @@
---- linux-2.6.25.10.n/arch/arm/mach-at91/Kconfig 2008-07-04 13:07:01.000000000 +0200
-+++ linux-2.6.25.10/arch/arm/mach-at91/Kconfig 2008-07-03 13:44:35.000000000 +0200
+--- a/arch/arm/mach-at91/Kconfig
++++ b/arch/arm/mach-at91/Kconfig
@@ -151,6 +151,12 @@
help
Select this if you are using Toptech's TT9200 board.
@@ -13,8 +13,8 @@
endif
# ----------------------------------------------------------
---- linux-2.6.25.10.n/arch/arm/mach-at91/Makefile 2008-07-04 13:05:05.000000000 +0200
-+++ linux-2.6.25.10/arch/arm/mach-at91/Makefile 2008-07-03 13:44:35.000000000 +0200
+--- a/arch/arm/mach-at91/Makefile
++++ b/arch/arm/mach-at91/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
@@ -23,8 +23,8 @@
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
obj-$(CONFIG_MACH_HOMEMATIC) += board-homematic.o
obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
---- linux-2.6.25.10.n/arch/arm/mach-at91/board-vlink.c 2008-07-04 13:06:19.000000000 +0200
-+++ linux-2.6.25.10/arch/arm/mach-at91/board-vlink.c 2008-07-04 12:45:48.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-vlink.c
@@ -0,0 +1,201 @@
+/*
+ * linux/arch/arm/mach-at91/board-vlink.c
diff --git a/target/linux/at91/patches-2.6.25/002-led-driver.patch b/target/linux/at91/patches-2.6.25/002-led-driver.patch
index 8c08c89..20e1fe7 100644
--- a/target/linux/at91/patches-2.6.25/002-led-driver.patch
+++ b/target/linux/at91/patches-2.6.25/002-led-driver.patch
@@ -1,6 +1,5 @@
-diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.25.10/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.25.10.old/arch/arm/mach-at91/at91rm9200_devices.c 2008-07-06 09:01:53.000000000 +0200
-+++ linux-2.6.25.10/arch/arm/mach-at91/at91rm9200_devices.c 2008-07-06 09:47:54.000000000 +0200
+--- a/arch/arm/mach-at91/at91rm9200_devices.c
++++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -717,6 +717,26 @@
static void __init at91_add_device_watchdog(void) {}
#endif
@@ -28,9 +27,8 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.
/* --------------------------------------------------------------------
* SSC -- Synchronous Serial Controller
-diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/Makefile linux-2.6.25.10/arch/arm/mach-at91/Makefile
---- linux-2.6.25.10.old/arch/arm/mach-at91/Makefile 2008-07-06 09:01:54.000000000 +0200
-+++ linux-2.6.25.10/arch/arm/mach-at91/Makefile 2008-07-06 09:45:08.000000000 +0200
+--- a/arch/arm/mach-at91/Makefile
++++ b/arch/arm/mach-at91/Makefile
@@ -60,7 +60,12 @@
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
@@ -45,9 +43,8 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/Makefile linux-2.6.25.10/arch/a
obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
# Power Management
-diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/vlink_leds.c linux-2.6.25.10/arch/arm/mach-at91/vlink_leds.c
---- linux-2.6.25.10.old/arch/arm/mach-at91/vlink_leds.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.25.10/arch/arm/mach-at91/vlink_leds.c 2008-07-06 09:40:37.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/vlink_leds.c
@@ -0,0 +1,105 @@
+/*
+ * LED driver for Atmel AT91-based boards.
@@ -154,9 +151,8 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/vlink_leds.c linux-2.6.25.10/ar
+}
+
+__initcall(leds_init);
-diff -urN linux-2.6.25.10.old/include/asm-arm/arch-at91/board.h linux-2.6.25.10/include/asm-arm/arch-at91/board.h
---- linux-2.6.25.10.old/include/asm-arm/arch-at91/board.h 2008-07-06 09:01:54.000000000 +0200
-+++ linux-2.6.25.10/include/asm-arm/arch-at91/board.h 2008-07-06 09:56:31.000000000 +0200
+--- a/include/asm-arm/arch-at91/board.h
++++ b/include/asm-arm/arch-at91/board.h
@@ -162,6 +162,11 @@
/* ISI */
extern void __init at91_add_device_isi(void);
diff --git a/target/linux/at91/patches-2.6.25/003-gpio-driver.patch b/target/linux/at91/patches-2.6.25/003-gpio-driver.patch
index e81c771..f27b361 100644
--- a/target/linux/at91/patches-2.6.25/003-gpio-driver.patch
+++ b/target/linux/at91/patches-2.6.25/003-gpio-driver.patch
@@ -1,6 +1,5 @@
-diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/board-vlink.c linux-2.6.25.10/arch/arm/mach-at91/board-vlink.c
---- linux-2.6.25.10.old/arch/arm/mach-at91/board-vlink.c 2008-07-07 11:20:21.000000000 +0200
-+++ linux-2.6.25.10/arch/arm/mach-at91/board-vlink.c 2008-07-07 12:11:40.000000000 +0200
+--- a/arch/arm/mach-at91/board-vlink.c
++++ b/arch/arm/mach-at91/board-vlink.c
@@ -99,7 +99,7 @@
*/
@@ -103,9 +102,8 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/board-vlink.c linux-2.6.25.10/a
}
MACHINE_START(VLINK, "FDL VersaLink")
-diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c linux-2.6.25.10/arch/arm/mach-at91/gpio.c
---- linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c 2008-07-07 11:20:21.000000000 +0200
-+++ linux-2.6.25.10/arch/arm/mach-at91/gpio.c 2008-07-07 11:42:33.000000000 +0200
+--- a/arch/arm/mach-at91/gpio.c
++++ b/arch/arm/mach-at91/gpio.c
@@ -29,6 +29,7 @@
static struct at91_gpio_bank *gpio;
@@ -175,9 +173,8 @@ diff -urN linux-2.6.25.10.old/arch/arm/mach-at91/gpio.c linux-2.6.25.10/arch/arm
/*--------------------------------------------------------------------------*/
#ifdef CONFIG_PM
-diff -urN linux-2.6.25.10.old/drivers/char/Kconfig linux-2.6.25.10/drivers/char/Kconfig
---- linux-2.6.25.10.old/drivers/char/Kconfig 2008-07-07 11:20:21.000000000 +0200
-+++ linux-2.6.25.10/drivers/char/Kconfig 2008-07-07 11:42:33.000000000 +0200
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
@@ -1072,5 +1072,12 @@
The SPI driver gives user mode access to this serial
bus on the AT91RM9200 processor.
@@ -191,9 +188,8 @@ diff -urN linux-2.6.25.10.old/drivers/char/Kconfig linux-2.6.25.10/drivers/char/
+
endmenu
-diff -urN linux-2.6.25.10.old/drivers/char/Makefile linux-2.6.25.10/drivers/char/Makefile
---- linux-2.6.25.10.old/drivers/char/Makefile 2008-07-07 11:20:21.000000000 +0200
-+++ linux-2.6.25.10/drivers/char/Makefile 2008-07-07 11:42:33.000000000 +0200
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
@@ -100,6 +100,7 @@
obj-$(CONFIG_TELCLOCK) += tlclk.o
obj-$(CONFIG_AT91_SPI) += at91_spi.o
@@ -202,9 +198,8 @@ diff -urN linux-2.6.25.10.old/drivers/char/Makefile linux-2.6.25.10/drivers/char
obj-$(CONFIG_MWAVE) += mwave/
obj-$(CONFIG_AGP) += agp/
-diff -urN linux-2.6.25.10.old/drivers/char/vlink_giu.c linux-2.6.25.10/drivers/char/vlink_giu.c
---- linux-2.6.25.10.old/drivers/char/vlink_giu.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.25.10/drivers/char/vlink_giu.c 2008-07-07 13:41:51.000000000 +0200
+--- /dev/null
++++ b/drivers/char/vlink_giu.c
@@ -0,0 +1,333 @@
+/*
+ * Driver for FDL Versalink GPIO
@@ -539,9 +534,8 @@ diff -urN linux-2.6.25.10.old/drivers/char/vlink_giu.c linux-2.6.25.10/drivers/c
+
+MODULE_AUTHOR("Hamish Guthrie <hamish@prodigi.ch>");
+MODULE_DESCRIPTION("FDL Versalink GPIO Driver");
-+MODULE_LICENSE("GPL");
---- linux-2.6.25.10.old/include/asm-arm/arch-at91/gpio.h 2008-07-03 05:46:47.000000000 +0200
-+++ linux-2.6.25.10/include/asm-arm/arch-at91/gpio.h 2008-07-07 17:03:03.000000000 +0200
+--- a/include/asm-arm/arch-at91/gpio.h
++++ b/include/asm-arm/arch-at91/gpio.h
@@ -199,6 +199,7 @@
/* callable at any time */
extern int at91_set_gpio_value(unsigned pin, int value);
diff --git a/target/linux/at91/patches-2.6.25/007-mtd-partition.patch b/target/linux/at91/patches-2.6.25/007-mtd-partition.patch
index 5c0cd3e..8060259 100644
--- a/target/linux/at91/patches-2.6.25/007-mtd-partition.patch
+++ b/target/linux/at91/patches-2.6.25/007-mtd-partition.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
-===================================================================
---- linux-2.6.22.19.orig/drivers/mtd/devices/at91_dataflash.c
-+++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
-@@ -175,7 +175,7 @@ static struct mtd_partition static_parti
+--- a/drivers/mtd/devices/at91_dataflash.c
++++ b/drivers/mtd/devices/at91_dataflash.c
+@@ -175,7 +175,7 @@
};
#endif
@@ -11,13 +9,11 @@ Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
#endif
-Index: linux-2.6.22.19/drivers/mtd/Kconfig
-===================================================================
---- linux-2.6.22.19.orig/drivers/mtd/Kconfig
-+++ linux-2.6.22.19/drivers/mtd/Kconfig
-@@ -168,6 +168,12 @@ config MTD_AFS_PARTS
- the partition map from the children of the flash node,
- as described in Documentation/powerpc/booting-without-of.txt.
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -168,6 +168,12 @@
+ the partition map from the children of the flash node,
+ as described in Documentation/powerpc/booting-without-of.txt.
+config MTD_AT91_PARTS
+ tristate "Atmel AT91 partitioning support"
@@ -28,11 +24,9 @@ Index: linux-2.6.22.19/drivers/mtd/Kconfig
comment "User Modules And Translation Layers"
config MTD_CHAR
-Index: linux-2.6.22.19/drivers/mtd/Makefile
-===================================================================
---- linux-2.6.22.19.orig/drivers/mtd/Makefile
-+++ linux-2.6.22.19/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -12,6 +12,7 @@
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
diff --git a/target/linux/at91/patches-2.6.25/008-fdl-serial.patch b/target/linux/at91/patches-2.6.25/008-fdl-serial.patch
index 3cdbec2..3319901 100644
--- a/target/linux/at91/patches-2.6.25/008-fdl-serial.patch
+++ b/target/linux/at91/patches-2.6.25/008-fdl-serial.patch
@@ -1,5 +1,5 @@
---- linux-2.6.25.10.old/drivers/serial/atmel_serial.c 2008-07-04 14:21:12.000000000 +0200
-+++ linux-2.6.25.10/drivers/serial/atmel_serial.c 2008-07-04 14:55:37.000000000 +0200
+--- a/drivers/serial/atmel_serial.c
++++ b/drivers/serial/atmel_serial.c
@@ -214,6 +214,34 @@
at91_set_gpio_value(AT91_PIN_PA21, 0);
else
diff --git a/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch b/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch
index 64bb3ec..45d6783 100644
--- a/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch
+++ b/target/linux/at91/patches-2.6.25/009-fdl-uartinit.patch
@@ -1,6 +1,6 @@
---- linux-2.6.25.10.old/arch/arm/mach-at91/at91rm9200_devices.c 2008-07-04 15:04:13.000000000 +0200
-+++ linux-2.6.25.10/arch/arm/mach-at91/at91rm9200_devices.c 2008-07-04 15:11:44.000000000 +0200
-@@ -981,7 +981,15 @@
+--- a/arch/arm/mach-at91/at91rm9200_devices.c
++++ b/arch/arm/mach-at91/at91rm9200_devices.c
+@@ -1001,7 +1001,15 @@
* We need to drive the pin manually. Default is off (RTS is active low).
*/
at91_set_gpio_output(AT91_PIN_PA21, 1);
@@ -17,7 +17,7 @@
}
static struct resource uart1_resources[] = {
-@@ -1119,6 +1127,14 @@
+@@ -1139,6 +1147,14 @@
at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
diff --git a/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch b/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch
index 120c32e..a848512 100644
--- a/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch
+++ b/target/linux/at91/patches-2.6.25/010-dm9161a-phyfix.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.22.19/drivers/net/arm/at91_ether.c
-===================================================================
---- linux-2.6.22.19.orig/drivers/net/arm/at91_ether.c
-+++ linux-2.6.22.19/drivers/net/arm/at91_ether.c
-@@ -146,6 +146,7 @@ static void update_linkspeed(struct net_
+--- a/drivers/net/arm/at91_ether.c
++++ b/drivers/net/arm/at91_ether.c
+@@ -146,6 +146,7 @@
struct at91_private *lp = netdev_priv(dev);
unsigned int bmsr, bmcr, lpa, mac_cfg;
unsigned int speed, duplex;
@@ -10,7 +8,7 @@ Index: linux-2.6.22.19/drivers/net/arm/at91_ether.c
if (!mii_link_ok(&lp->mii)) { /* no link */
netif_carrier_off(dev);
-@@ -158,8 +159,15 @@ static void update_linkspeed(struct net_
+@@ -158,8 +159,15 @@
read_phy(lp->phy_address, MII_BMSR, &bmsr);
read_phy(lp->phy_address, MII_BMCR, &bmcr);
if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */
diff --git a/target/linux/at91/patches-2.6.25/014-initpartition.patch b/target/linux/at91/patches-2.6.25/014-initpartition.patch
index 1c49db5..4912074 100644
--- a/target/linux/at91/patches-2.6.25/014-initpartition.patch
+++ b/target/linux/at91/patches-2.6.25/014-initpartition.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
-===================================================================
---- linux-2.6.22.19.orig/drivers/mtd/devices/at91_dataflash.c
-+++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
-@@ -163,12 +163,12 @@ static struct mtd_partition static_parti
+--- a/drivers/mtd/devices/at91_dataflash.c
++++ b/drivers/mtd/devices/at91_dataflash.c
+@@ -163,12 +163,12 @@
.mask_flags = MTD_WRITEABLE, /* read-only */
},
{
diff --git a/target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch b/target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch
index e251ec9..412490f 100644
--- a/target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch
+++ b/target/linux/at91/patches-2.6.25/017-usb_serial_endpoint_size.patch
@@ -1,5 +1,5 @@
---- linux-2.6.25.10.old/drivers/usb/serial/usb-serial.c 2008-07-08 07:42:24.000000000 +0200
-+++ linux-2.6.25.10/drivers/usb/serial/usb-serial.c 2008-07-08 14:07:39.000000000 +0200
+--- a/drivers/usb/serial/usb-serial.c
++++ b/drivers/usb/serial/usb-serial.c
@@ -905,7 +905,7 @@
dev_err(&interface->dev, "No free urbs available\n");
goto probe_error;