Rename 'atheros' target to 'ath25'

Rename 'atheros' target to more precise 'ath25'.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44736

6 files changed, 214 insertions, 0 deletions

diff --git a/target/linux/ath25/base-files/etc/config/system b/target/linux/ath25/base-files/etc/config/system
new file mode 100644
index 0000000..1d29ad8
--- /dev/null
+++ b/target/linux/ath25/base-files/etc/config/system
@@ -0,0 +1,23 @@
+config system
+	option hostname OpenWrt
+	option timezone UTC
+
+config timeserver ntp
+	list server	0.openwrt.pool.ntp.org
+	list server	1.openwrt.pool.ntp.org
+	list server	2.openwrt.pool.ntp.org
+	list server	3.openwrt.pool.ntp.org
+
+config button
+	option button	reset
+	option action	released
+	option handler	"logger reboot"
+	option min		0
+	option max		4
+
+config button
+	option button	reset
+	option action	released
+	option handler	"logger factory default"
+	option min		5
+	option max		30
diff --git a/target/linux/ath25/base-files/etc/hotplug.d/button/00-button b/target/linux/ath25/base-files/etc/hotplug.d/button/00-button
new file mode 100644
index 0000000..63cc217
--- /dev/null
+++ b/target/linux/ath25/base-files/etc/hotplug.d/button/00-button
@@ -0,0 +1,24 @@
+. /lib/functions.sh
+do_button () {
+	local button
+	local action
+	local handler
+	local min
+	local max
+
+	config_get button $1 button
+	config_get action $1 action
+	config_get handler $1 handler
+	config_get min $1 min
+	config_get max $1 max
+	
+	[ "$ACTION" = "$action" -a "$BUTTON" = "$button" -a -n "$handler" ] && {
+		[ -z "$min" -o -z "$max" ] && eval $handler 
+		[ -n "$min" -a -n "$max" ] && {
+			[ $min -le $SEEN -a $max -ge $SEEN ] && eval $handler 
+		}
+	}
+}
+
+config_load system
+config_foreach do_button button
diff --git a/target/linux/ath25/base-files/etc/uci-defaults/01_leds b/target/linux/ath25/base-files/etc/uci-defaults/01_leds
new file mode 100644
index 0000000..076a04b
--- /dev/null
+++ b/target/linux/ath25/base-files/etc/uci-defaults/01_leds
@@ -0,0 +1,11 @@
+#!/bin/sh
+# Copyright 2012 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+ucidef_set_led_netdev "wlan" "wlan" "wlan" "wlan0"
+
+ucidef_commit_leds
+
+exit 0
diff --git a/target/linux/ath25/base-files/etc/uci-defaults/02_network b/target/linux/ath25/base-files/etc/uci-defaults/02_network
new file mode 100644
index 0000000..7e91e6a
--- /dev/null
+++ b/target/linux/ath25/base-files/etc/uci-defaults/02_network
@@ -0,0 +1,45 @@
+#!/bin/sh
+if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \
+     -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/0:00" ] && \
+   [ -x /sbin/swconfig ];
+then
+	uci batch <<EOF
+set network.eth0=switch
+set network.eth0.name=eth0
+set network.eth0.reset=1
+set network.eth0.enable_vlan=1
+set network.eth0_1=switch_vlan
+set network.eth0_1.device=eth0
+set network.eth0_1.vlan=1
+set network.eth0_1.ports="0 1 2 3 5t"
+set network.eth0_2=switch_vlan
+set network.eth0_2.device=eth0
+set network.eth0_2.vlan=2
+set network.eth0_2.ports="4 5t"
+EOF
+	HAS_SWITCH=1
+fi
+
+if [ -n "$HAS_SWITCH" -o \
+	-e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+	-e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
+	uci batch <<EOF
+set network.lan.ifname=eth0.1
+set network.wan=interface
+set network.wan.ifname=eth0.2
+set network.wan.proto=dhcp
+commit network
+EOF
+	HAS_SWITCH=1
+fi
+
+[ -z "$HAS_SWITCH" -a -d /sys/class/net/eth1 ] && {
+	uci batch <<EOF
+set network.wan=interface
+set network.wan.ifname=eth1
+set network.wan.proto=dhcp
+commit network
+EOF
+}
+
+uci commit network
diff --git a/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros b/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros
new file mode 100644
index 0000000..434103e
--- /dev/null
+++ b/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros
@@ -0,0 +1,35 @@
+#!/bin/sh
+
+# reset button only supported on ar5315+ at the moment
+preinit_ip() {
+	if [ -z "$pi_ifname" ]; then
+		grep -q 'Atheros AR231[567]' /proc/cpuinfo && {
+			if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+			     -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
+				vconfig set_name_type DEV_PLUS_VID_NO_PAD
+				ifconfig eth0 up		
+				vconfig add eth0 1
+				ifname=eth0.1
+			else
+				ifname=eth0
+			fi
+			pi_ifname=$ifname
+		}
+	fi
+	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
+		ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
+    	}
+}
+
+
+# reset button only supported on ar5315+ at the moment
+
+preinit_ip_deconfig() {
+	if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+	        -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
+		vconfig rem eth0.1 2>/dev/null
+		ifconfig $pi_ifname down
+	elif [ -n "$pi_ifname" ]; then
+		ifconfig $pi_ifname 0.0.0.0
+	fi
+}
diff --git a/target/linux/ath25/base-files/lib/upgrade/platform.sh b/target/linux/ath25/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000..d44b8fa
--- /dev/null
+++ b/target/linux/ath25/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,76 @@
+CI_BLKSZ=65536
+CI_LDADR=0x80041000
+
+platform_find_partitions() {
+	local first dev size erasesize name
+	while read dev size erasesize name; do
+		name=${name#'"'}; name=${name%'"'}
+		case "$name" in
+			vmlinux.bin.l7|kernel|linux|rootfs)
+				if [ -z "$first" ]; then
+					first="$name"
+				else
+					echo "$erasesize:$first:$name"
+					break
+				fi
+			;;
+		esac
+	done < /proc/mtd
+}
+
+platform_find_kernelpart() {
+	local part
+	for part in "${1%:*}" "${1#*:}"; do
+		case "$part" in
+			vmlinux.bin.l7|kernel|linux)
+				echo "$part"
+				break
+			;;
+		esac
+	done
+}
+
+platform_check_image() {
+	[ "$#" -gt 1 ] && return 1
+
+	case "$(get_magic_word "$1")" in
+		# Combined Image
+		4349)
+			local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null)
+			local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}"
+
+			if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then
+				return 0
+			else
+				echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)"
+				return 1
+			fi
+		;;
+		*)
+			echo "Invalid image. Use combined .img files on this platform"
+			return 1
+		;;
+	esac
+}
+
+platform_do_upgrade() {
+	local partitions=$(platform_find_partitions)
+	local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
+	local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}"
+	local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
+	local kern_blocks=$(($kern_length / $CI_BLKSZ))
+	local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ))
+
+	if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \
+	   [ ${kern_blocks:-0} -gt 0 ] && \
+	   [ ${root_blocks:-0} -gt ${kern_blocks:-0} ] && \
+	   [ ${erase_size:-0} -gt 0 ];
+	then
+		local append=""
+		[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+
+		( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
+		  dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \
+			mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions
+	fi
+}