ath79: drop, its not ready for a release yet

Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 0 insertions, 127 deletions

diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
deleted file mode 100644
index 4e52e30..0000000
--- a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7242.dtsi"
-
-/ {
-	compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
-	model = "Buffalo WZR-HP-G450H";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		poll-interval = <20>;
-		button@0 {
-			label = "usb";
-			linux,code = <BTN_2>;
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		button@1 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		button@2 {
-			label = "movie_engine";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
-			debounce-interval = <60>;
-		};
-
-		button@3 {
-			label = "aoss";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		button@4 {
-			label = "router_off";
-			linux,code = <BTN_5>;
-			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
-			debounce-interval = <60>;
-		};
-
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@0 {
-			label = "buffalo:orange:security";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led@1 {
-			label = "buffalo:red:diag";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		gpio_usb_power {
-			gpio-export,name = "wzr-hp-g450h:usb-power";
-			gpio-export,output = <1>;
-			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-	phy-mask = <0x1>;
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		phy-mode = "rgmii";
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	pll-data = <0x62000000 0 0>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&uart {
-	status = "okay";
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-
-	ath9k@0000 {
-		reg = <0x0000 0 0 0 0>;
-		qca,no-eeprom;
-	};
-};