ath79: fix dts warnings

Fix all issues found by the devicetree compiler like wrong address/size
cells as well as wrong/missing/superfluous unit addresses.

Signed-off-by: Mathias Kresin <dev@kresin.me>

45 files changed, 90 insertions, 188 deletions

diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
index 7529c68..8e28c4d 100644
--- a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
@@ -72,8 +72,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
 		wps {
@@ -101,6 +99,8 @@
 		gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
 
 		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "okay";
 
 			phy-mask = <0x10>;
@@ -118,6 +118,8 @@
 };
 
 &usb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	usb_ochi_port: port@1 {
@@ -127,6 +129,8 @@
 };
 
 &usb2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	usb_echi_port: port@1 {
@@ -148,8 +152,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/ar7240.dtsi b/target/linux/ath79/dts/ar7240.dtsi
index 13112e4..d32960a 100644
--- a/target/linux/ath79/dts/ar7240.dtsi
+++ b/target/linux/ath79/dts/ar7240.dtsi
@@ -40,14 +40,15 @@
 
 	builtin_switch: switch0@1f {
 		compatible = "qca,ar8216-builtin";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		reg = <0x1f>;
 		resets = <&rst 8>;
 		reset-names = "switch";
 
 		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			swphy4: ethernet-phy@4 {
 				reg = <4>;
 				phy-mode = "mii";
diff --git a/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi b/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi
index edf2090..8ee4148 100644
--- a/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi
+++ b/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi
@@ -16,8 +16,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
@@ -64,8 +62,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -117,7 +113,7 @@
 &pcie {
 	status = "okay";
 
-	ath9k: wifi@168c,002b {
+	ath9k: wifi@0,0 {
 		compatible = "pci168c,002b";
 		reg = <0x0000 0 0 0 0>;
 		qca,no-eeprom;
diff --git a/target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v2.dts b/target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v2.dts
index 8754537..90f554d 100644
--- a/target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v2.dts
+++ b/target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v2.dts
@@ -16,8 +16,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
@@ -89,8 +87,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -137,7 +133,7 @@
 &pcie {
 	status = "okay";
 
-	ath9k: wifi@168c,002b {
+	ath9k: wifi@0,0 {
 		compatible = "pci168c,002b";
 		reg = <0x0000 0 0 0 0>;
 		qca,no-eeprom;
diff --git a/target/linux/ath79/dts/ar7241.dtsi b/target/linux/ath79/dts/ar7241.dtsi
index c490476..2e7c26b 100644
--- a/target/linux/ath79/dts/ar7241.dtsi
+++ b/target/linux/ath79/dts/ar7241.dtsi
@@ -59,14 +59,15 @@
 
 	builtin_switch: switch0@1f {
 		compatible = "qca,ar8216-builtin";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		reg = <0x1f>;
 		resets = <&rst 8>;
 		reset-names = "switch";
 
 		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			swphy4: ethernet-phy@4 {
 				reg = <4>;
 				phy-mode = "mii";
diff --git a/target/linux/ath79/dts/ar7241_tplink.dtsi b/target/linux/ath79/dts/ar7241_tplink.dtsi
index 6cc515b..ef24879 100644
--- a/target/linux/ath79/dts/ar7241_tplink.dtsi
+++ b/target/linux/ath79/dts/ar7241_tplink.dtsi
@@ -12,8 +12,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
@@ -51,8 +49,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -85,7 +81,7 @@
 &pcie {
 	status = "okay";
 
-	ath9k: wifi@0 {
+	ath9k: wifi@0,0 {
 		reg = <0x0000 0 0 0 0>;
 		#gpio-cells = <2>;
 		gpio-controller;
diff --git a/target/linux/ath79/dts/ar7241_tplink_tl-mr3x20.dtsi b/target/linux/ath79/dts/ar7241_tplink_tl-mr3x20.dtsi
index ad18945..4b3b46d 100644
--- a/target/linux/ath79/dts/ar7241_tplink_tl-mr3x20.dtsi
+++ b/target/linux/ath79/dts/ar7241_tplink_tl-mr3x20.dtsi
@@ -26,6 +26,8 @@
 };
 
 &usb {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	hub_port: port@1 {
diff --git a/target/linux/ath79/dts/ar7241_ubnt_unifi.dts b/target/linux/ath79/dts/ar7241_ubnt_unifi.dts
index ed6142e..ddddba2 100644
--- a/target/linux/ath79/dts/ar7241_ubnt_unifi.dts
+++ b/target/linux/ath79/dts/ar7241_ubnt_unifi.dts
@@ -22,9 +22,6 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		poll-interval = <20>;
 		reset {
 			linux,code = <KEY_RESTART>;
@@ -60,8 +57,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -111,7 +106,7 @@
 &pcie {
 	status = "okay";
 
-	wifi@0 {
+	wifi@0,0 {
 		reg = <0x0000 0 0 0 0>;
 		qca,no-eeprom;
 	};
diff --git a/target/linux/ath79/dts/ar7241_ubnt_xm.dtsi b/target/linux/ath79/dts/ar7241_ubnt_xm.dtsi
index 615e230..fddcbe2 100644
--- a/target/linux/ath79/dts/ar7241_ubnt_xm.dtsi
+++ b/target/linux/ath79/dts/ar7241_ubnt_xm.dtsi
@@ -17,9 +17,6 @@
 */
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		poll-interval = <20>;
 		reset {
 			linux,code = <KEY_RESTART>;
@@ -65,8 +62,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -116,7 +111,7 @@
 &pcie {
 	status = "okay";
 
-	wifi@0 {
+	wifi@0,0 {
 		reg = <0x0000 0 0 0 0>;
 		qca,no-eeprom;
 	};
diff --git a/target/linux/ath79/dts/ar7242_avm_fritz300e.dts b/target/linux/ath79/dts/ar7242_avm_fritz300e.dts
index 15f1e32..db4bcc6 100644
--- a/target/linux/ath79/dts/ar7242_avm_fritz300e.dts
+++ b/target/linux/ath79/dts/ar7242_avm_fritz300e.dts
@@ -16,8 +16,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		wps {
@@ -98,8 +96,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -142,7 +138,7 @@
 &pcie {
 	status = "okay";
 
-	ath9k: wifi@0 {
+	ath9k: wifi@0,0 {
 		reg = <0x0000 0 0 0 0>;
 		#gpio-cells = <2>;
 		gpio-controller;
diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
index 27933d5..a0a439b 100644
--- a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
+++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
@@ -12,10 +12,8 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		poll-interval = <20>;
+
 		usb {
 			linux,code = <BTN_2>;
 			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
@@ -110,7 +108,7 @@
 &pcie {
 	status = "okay";
 
-	wifi@0 {
+	wifi@0,0 {
 		reg = <0x0000 0 0 0 0>;
 		qca,no-eeprom;
 	};
diff --git a/target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts b/target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts
index d7bb406..0cd9026 100644
--- a/target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts
+++ b/target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts
@@ -26,8 +26,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
@@ -89,6 +87,8 @@
 		realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
 
 		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "okay";
 
 			phy0: ethernet-phy@0 {
@@ -107,8 +107,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -143,6 +141,8 @@
 };
 
 &usb {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	hub_port: port@1 {
@@ -158,7 +158,7 @@
 &pcie {
 	status = "okay";
 
-	ath9k: wifi@0 {
+	ath9k: wifi@0,0 {
 		reg = <0x0000 0 0 0 0>;
 		#gpio-cells = <2>;
 		gpio-controller;
diff --git a/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts b/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts
index d01d2cc..58fc8a5 100644
--- a/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts
+++ b/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts
@@ -22,8 +22,6 @@
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		button0 {
 			label = "reset";
@@ -88,6 +86,8 @@
 };
 
 &usb {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	hub_port: port@1 {
@@ -105,8 +105,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/ar9330.dtsi b/target/linux/ath79/dts/ar9330.dtsi
index d50666d..01116ff 100644
--- a/target/linux/ath79/dts/ar9330.dtsi
+++ b/target/linux/ath79/dts/ar9330.dtsi
@@ -174,14 +174,14 @@
 
 	builtin_switch: switch0@1f {
 		compatible = "qca,ar8216-builtin";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		reg = <0x1f>;
 		resets = <&rst 8>;
 		reset-names = "switch";
 
 		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			swphy4: ethernet-phy@4 {
 				reg = <4>;
 				phy-mode = "mii";
diff --git a/target/linux/ath79/dts/ar9330_glinet_ar150.dts b/target/linux/ath79/dts/ar9330_glinet_ar150.dts
index dfaa1b9..3b8f7a2 100644
--- a/target/linux/ath79/dts/ar9330_glinet_ar150.dts
+++ b/target/linux/ath79/dts/ar9330_glinet_ar150.dts
@@ -40,8 +40,6 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
 		manual {
@@ -87,8 +85,6 @@
 	status = "okay";
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <104000000>;
 		reg = <0>;
diff --git a/target/linux/ath79/dts/ar9331_dptechnics_dpt-module.dts b/target/linux/ath79/dts/ar9331_dptechnics_dpt-module.dts
index 02c15fe..4159cb2 100644
--- a/target/linux/ath79/dts/ar9331_dptechnics_dpt-module.dts
+++ b/target/linux/ath79/dts/ar9331_dptechnics_dpt-module.dts
@@ -26,11 +26,9 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
-		button@0 {
+		button0 {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
@@ -65,8 +63,6 @@
 
 	/* Winbond 25Q128FVSG SPI flash */
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "winbond,w25q128", "jedec,spi-nor";
 		spi-max-frequency = <104000000>;
 		reg = <0>;
diff --git a/target/linux/ath79/dts/ar9331_dragino_ms14.dts b/target/linux/ath79/dts/ar9331_dragino_ms14.dts
index e266a6c..963e9f6 100644
--- a/target/linux/ath79/dts/ar9331_dragino_ms14.dts
+++ b/target/linux/ath79/dts/ar9331_dragino_ms14.dts
@@ -44,17 +44,15 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
-		button@0 {
+		button0 {
 			label = "jumpstart";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 		};
 
-		button@1 {
+		button1 {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
@@ -89,8 +87,6 @@
 
 	/* Winbond 25Q128BVFG SPI flash */
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "winbond,w25q128", "jedec,spi-nor";
 		spi-max-frequency = <104000000>;
 		reg = <0>;
diff --git a/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts b/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
index a623f0e..0332ec2 100644
--- a/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
+++ b/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
@@ -27,8 +27,6 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
 		wps {
@@ -67,8 +65,6 @@
 	status = "okay";
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <104000000>;
 		reg = <0>;
diff --git a/target/linux/ath79/dts/ar9331_etactica_eg200.dts b/target/linux/ath79/dts/ar9331_etactica_eg200.dts
index 2dca1bf..569ab11 100644
--- a/target/linux/ath79/dts/ar9331_etactica_eg200.dts
+++ b/target/linux/ath79/dts/ar9331_etactica_eg200.dts
@@ -16,8 +16,6 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <50>;
 
 		restore {
@@ -94,8 +92,6 @@
 	status = "okay";
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
diff --git a/target/linux/ath79/dts/ar9331_onion_omega.dts b/target/linux/ath79/dts/ar9331_onion_omega.dts
index 834f065..a93c7d7 100644
--- a/target/linux/ath79/dts/ar9331_onion_omega.dts
+++ b/target/linux/ath79/dts/ar9331_onion_omega.dts
@@ -26,11 +26,9 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
-		button@0 {
+		button0 {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
@@ -65,8 +63,6 @@
 
 	/* Winbond 25Q128FVSG SPI flash */
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "winbond,w25q128", "jedec,spi-nor";
 		spi-max-frequency = <104000000>;
 		reg = <0>;
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-mr3020-v1.dts b/target/linux/ath79/dts/ar9331_tplink_tl-mr3020-v1.dts
index 684f092..3045d22 100644
--- a/target/linux/ath79/dts/ar9331_tplink_tl-mr3020-v1.dts
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-mr3020-v1.dts
@@ -48,8 +48,6 @@
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		button0 {
 			label = "reset";
@@ -98,6 +96,8 @@
 };
 
 &usb {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	dr_mode = "host";
 	vbus-supply = <&reg_usb_vbus>;
 	status = "okay";
@@ -118,8 +118,6 @@
 
 	/* Spansion S25FL032PIF SPI flash */
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <104000000>;
 		reg = <0>;
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi b/target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
index 7ab9439..e061cbe 100644
--- a/target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
@@ -14,8 +14,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
@@ -50,8 +48,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi b/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi
index 9d8c1a0..770ab56 100644
--- a/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi
+++ b/target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi
@@ -17,8 +17,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
@@ -90,8 +88,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/ar9341_pcs_cr3000.dts b/target/linux/ath79/dts/ar9341_pcs_cr3000.dts
index 33d7e4f..dace6c3 100644
--- a/target/linux/ath79/dts/ar9341_pcs_cr3000.dts
+++ b/target/linux/ath79/dts/ar9341_pcs_cr3000.dts
@@ -18,8 +18,7 @@
 	keys {
 		compatible = "gpio-keys-polled";
 		poll-interval = <20>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&jtag_disable_pins>;
 
@@ -104,8 +103,6 @@
 	status = "okay";
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/ar9344.dtsi b/target/linux/ath79/dts/ar9344.dtsi
index ce73ef5..117c0b0 100644
--- a/target/linux/ath79/dts/ar9344.dtsi
+++ b/target/linux/ath79/dts/ar9344.dtsi
@@ -13,7 +13,7 @@
 };
 
 &rst {
-	intc2: interrupt-controller@2 {
+	intc2: interrupt-controller {
 		compatible = "qca,ar9340-intc";
 
 		interrupt-parent = <&cpuintc>;
diff --git a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
index 01d5dae..903044e 100644
--- a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
+++ b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
@@ -53,8 +53,6 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
@@ -83,8 +81,6 @@
 	status = "okay";
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -140,7 +136,7 @@
 &pcie {
 	status = "okay";
 
-	ath9k: wifi@168c,0030 {
+	ath9k: wifi@0,0 {
 		compatible = "pci168c,0030";
 		reg = <0x0000 0 0 0 0>;
 		mtd-mac-address = <&art 0xc>;
diff --git a/target/linux/ath79/dts/ar9344_pcs_cap324.dts b/target/linux/ath79/dts/ar9344_pcs_cap324.dts
index 5751598..ada28d6 100644
--- a/target/linux/ath79/dts/ar9344_pcs_cap324.dts
+++ b/target/linux/ath79/dts/ar9344_pcs_cap324.dts
@@ -18,8 +18,7 @@
 	keys {
 		compatible = "gpio-keys-polled";
 		poll-interval = <20>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&jtag_disable_pins>;
 
@@ -93,8 +92,6 @@
 	status = "okay";
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -133,7 +130,7 @@
 &pcie {
 	status = "okay";
 
-	ath9k: wifi@168c,0030 {
+	ath9k: wifi@0,0 {
 		compatible = "168c,0030";
 		reg = <0x0000 0 0 0 0>;
 		mtd-mac-address = <&art 0x0>;
diff --git a/target/linux/ath79/dts/ar9344_pcs_cr5000.dts b/target/linux/ath79/dts/ar9344_pcs_cr5000.dts
index cbdcb6d..7c9103c 100644
--- a/target/linux/ath79/dts/ar9344_pcs_cr5000.dts
+++ b/target/linux/ath79/dts/ar9344_pcs_cr5000.dts
@@ -15,12 +15,10 @@
 		led-status = &status;
 	};
 
-
 	keys {
 		compatible = "gpio-keys-polled";
 		poll-interval = <20>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&jtag_disable_pins>;
 
@@ -83,8 +81,6 @@
 	status = "okay";
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -122,17 +118,13 @@
 
 &usb {
 	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-	port@1 {
+	hub_port1: port@1 {
 		reg = <1>;
 		#trigger-source-cells = <0>;
-
-		hub_port1: port@1 {
-			reg = <1>;
-			#trigger-source-cells = <0>;
-		};
 	};
-
 };
 
 &usb_phy {
@@ -142,8 +134,9 @@
 &pcie {
 	status = "okay";
 
-	ath9k: wifi@168c,0030 {
+	ath9k: wifi@0,0 {
 		compatible = "pci168c,0030";
+		reg = <0x0000 0 0 0 0>;
 		mtd-mac-address = <&art 0x5002>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -171,6 +164,8 @@
 };
 
 &eth0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	/* default for ar934x, except for 1000M */
@@ -188,30 +183,35 @@
 
 	port@0 {
 		compatible = "swconfig,port";
+		reg = <0>;
 		swconfig,segment = "lan";
 		swconfig,portmap = <1 1>;
 	};
 
 	port@1 {
 		compatible = "swconfig,port";
+		reg = <1>;
 		swconfig,segment = "lan";
 		swconfig,portmap = <2 2>;
 	};
 
 	port@2 {
 		compatible = "swconfig,port";
+		reg = <2>;
 		swconfig,segment = "lan";
 		swconfig,portmap = <3 3>;
 	};
 
 	port@3 {
 		compatible = "swconfig,port";
+		reg = <3>;
 		swconfig,segment = "lan";
 		swconfig,portmap = <4 4>;
 	};
 
 	port@4 {
 		compatible = "swconfig,port";
+		reg = <4>;
 		swconfig,segment = "wan";
 		swconfig,portmap = <5 5>;
 	};
diff --git a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
index 558a763..d2c88fc 100644
--- a/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
+++ b/target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi
@@ -65,8 +65,6 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
@@ -85,7 +83,6 @@
 
 	gpio-export {
 		compatible = "gpio-export";
-		#size-cells = <0>;
 
 		gpio_usb1_power {
 			gpio-export,name = "tp-link:power:usb1";
@@ -131,8 +128,6 @@
 	status = "okay";
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -163,9 +158,13 @@
 };
 
 &usb {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	port@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <1>;
 		#trigger-source-cells = <0>;
 
@@ -188,7 +187,7 @@
 &pcie {
 	status = "okay";
 
-	ath9k: wifi@168c,0033 {
+	ath9k: wifi@0,0 {
 		compatible = "pci168c,0033";
 		reg = <0x0000 0 0 0 0>;
 		mtd-mac-address = <&uboot 0x1fc00>;
diff --git a/target/linux/ath79/dts/ar934x.dtsi b/target/linux/ath79/dts/ar934x.dtsi
index e05b295..3eed4de 100644
--- a/target/linux/ath79/dts/ar934x.dtsi
+++ b/target/linux/ath79/dts/ar934x.dtsi
@@ -217,8 +217,6 @@
 
 	builtin_switch: switch0@1f {
 		compatible = "qca,ar8229-builtin";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		reg = <0x1f>;
 		resets = <&rst 8>;
@@ -227,6 +225,9 @@
 		phy4-mii-enable;
 
 		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			swphy0: ethernet-phy@0 {
 				reg = <0>;
 				phy-mode = "mii";
diff --git a/target/linux/ath79/dts/qca9533.dtsi b/target/linux/ath79/dts/qca9533.dtsi
index 1681b31..97179a3 100644
--- a/target/linux/ath79/dts/qca9533.dtsi
+++ b/target/linux/ath79/dts/qca9533.dtsi
@@ -126,7 +126,7 @@
 
 				#reset-cells = <1>;
 
-				intc2: interrupt-controller@2 {
+				intc2: interrupt-controller {
 					compatible = "qca,ar9340-intc";
 
 					interrupt-parent = <&cpuintc>;
@@ -246,8 +246,6 @@
 
 	builtin_switch: switch0@1f {
 		compatible = "qca,ar8229-builtin";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		reg = <0x1f>;
 		resets = <&rst 8>;
@@ -256,6 +254,9 @@
 		phy4-mii-enable;
 
 		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			swphy0: ethernet-phy@0 {
 				reg = <0>;
 				phy-mode = "mii";
diff --git a/target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi b/target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi
index 9d8dc78..afbb006 100644
--- a/target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi
+++ b/target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi
@@ -11,25 +11,23 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&jtag_disable_pins>;
 
-		button@0 {
+		button0 {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 		};
 
-		button@1 {
+		button1 {
 			label = "button right";
 			linux,code = <BTN_0>;
 			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		button@3 {
+		button3 {
 			label = "button left";
 			linux,code = <BTN_1>;
 			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
@@ -73,6 +71,8 @@
 };
 
 &usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	hub_port: port@1 {
diff --git a/target/linux/ath79/dts/qca9533_glinet_ar300m_nand.dts b/target/linux/ath79/dts/qca9533_glinet_ar300m_nand.dts
index c1c4493..33226b9 100644
--- a/target/linux/ath79/dts/qca9533_glinet_ar300m_nand.dts
+++ b/target/linux/ath79/dts/qca9533_glinet_ar300m_nand.dts
@@ -7,8 +7,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "winbond,w25q128", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -42,8 +40,6 @@
 	};
 
 	flash@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "spinand,mt29f";
 		reg = <1>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/qca9533_glinet_ar300m_nor.dts b/target/linux/ath79/dts/qca9533_glinet_ar300m_nor.dts
index 59793dc..9357ea6 100644
--- a/target/linux/ath79/dts/qca9533_glinet_ar300m_nor.dts
+++ b/target/linux/ath79/dts/qca9533_glinet_ar300m_nor.dts
@@ -10,8 +10,6 @@
 	num-cs = <0>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "winbond,w25q128", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi b/target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi
index 4219125..7fe1716 100644
--- a/target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi
@@ -64,8 +64,6 @@
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		reset {
 			label = "Reset button";
@@ -92,8 +90,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/qca9557.dtsi b/target/linux/ath79/dts/qca9557.dtsi
index 4f797a5..c3874bc 100644
--- a/target/linux/ath79/dts/qca9557.dtsi
+++ b/target/linux/ath79/dts/qca9557.dtsi
@@ -53,7 +53,7 @@
 				status = "disabled";
 			};
 
-			usb_phy0: usb-phy@18030000 {
+			usb_phy0: usb-phy0 {
 				compatible ="qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
 
 				reset-names = "usb-phy", "usb-suspend-override";
@@ -64,7 +64,7 @@
 				status = "disabled";
 			};
 
-			usb_phy1: usb-phy {
+			usb_phy1: usb-phy1 {
 				compatible = "qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
 
 				reset-names = "usb-phy", "usb-suspend-override";
@@ -137,7 +137,7 @@
 				#reset-cells = <1>;
 				interrupt-parent = <&cpuintc>;
 
-				intc2: interrupt-controller@2 {
+				intc2: interrupt-controller2 {
 					compatible = "qca,ar9340-intc";
 
 					interrupt-parent = <&cpuintc>;
@@ -151,7 +151,7 @@
 							<0x1f0>;	/* pcie rc 0 */
 				};
 
-				intc3: interrupt-controller@3 {
+				intc3: interrupt-controller3 {
 					compatible = "qca,ar9340-intc";
 
 					interrupt-parent = <&cpuintc>;
diff --git a/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts b/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts
index 5bbbc43..097e44b 100644
--- a/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts
+++ b/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts
@@ -47,11 +47,9 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
-		button@0 {
+		button0 {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
@@ -102,8 +100,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-c7.dtsi b/target/linux/ath79/dts/qca9558_tplink_archer-c7.dtsi
index 6fb25a9..70c8f63 100644
--- a/target/linux/ath79/dts/qca9558_tplink_archer-c7.dtsi
+++ b/target/linux/ath79/dts/qca9558_tplink_archer-c7.dtsi
@@ -56,8 +56,6 @@
 
 	gpio_keys: keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		reset {
 			label = "Reset button";
@@ -69,7 +67,6 @@
 
 	gpio-export {
 		compatible = "gpio-export";
-		#size-cells = <0>;
 
 		gpio_usb1_power {
 			gpio-export,name = "tp-link:power:usb1";
@@ -103,6 +100,8 @@
 };
 
 &usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	hub_port0: port@1 {
@@ -116,6 +115,8 @@
 };
 
 &usb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	hub_port1: port@1 {
@@ -129,8 +130,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
index a7dd8fe..52041b8 100644
--- a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
@@ -48,8 +48,6 @@
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		reset {
 			label = "Reset button";
@@ -91,6 +89,8 @@
 };
 
 &usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	hub_port0: port@1 {
@@ -104,8 +104,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/qca9563_phicomm_k2t.dts b/target/linux/ath79/dts/qca9563_phicomm_k2t.dts
index 4ff9320..ca6d4ec 100644
--- a/target/linux/ath79/dts/qca9563_phicomm_k2t.dts
+++ b/target/linux/ath79/dts/qca9563_phicomm_k2t.dts
@@ -42,8 +42,6 @@
 
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
@@ -72,8 +70,6 @@
 	status = "okay";
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-re450-v2.dts b/target/linux/ath79/dts/qca9563_tplink_tl-re450-v2.dts
index 646cdf2..852f1c9 100644
--- a/target/linux/ath79/dts/qca9563_tplink_tl-re450-v2.dts
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-re450-v2.dts
@@ -68,8 +68,6 @@
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		reset {
 			label = "Reset button";
@@ -133,8 +131,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
index fd0c974..056fe4e 100644
--- a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
@@ -76,8 +76,6 @@
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		reset {
 			label = "Reset button";
@@ -119,8 +117,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043nd-v4.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043nd-v4.dts
index 5f48e6a..ec10f08 100644
--- a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043nd-v4.dts
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043nd-v4.dts
@@ -26,6 +26,8 @@
 };
 
 &usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	hub_port0: port@1 {
diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi b/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
index 381575c..0b7acde 100644
--- a/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
+++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
@@ -31,8 +31,6 @@
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		reset {
 			label = "Reset button";
@@ -60,8 +58,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
diff --git a/target/linux/ath79/dts/qca956x.dtsi b/target/linux/ath79/dts/qca956x.dtsi
index d3a6df9..10c88ee 100644
--- a/target/linux/ath79/dts/qca956x.dtsi
+++ b/target/linux/ath79/dts/qca956x.dtsi
@@ -114,7 +114,7 @@
 				#reset-cells = <1>;
 				interrupt-parent = <&cpuintc>;
 
-				intc3: interrupt-controller@3 {
+				intc3: interrupt-controller {
 					compatible = "qca,ar9340-intc";
 
 					interrupt-parent = <&cpuintc>;
@@ -271,9 +271,6 @@
 
 	builtin_switch: switch0@1f {
 		compatible = "qca,ar8229-builtin";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		reg = <0x1f>;
 		resets = <&rst 8>;
 		reset-names = "switch";
@@ -281,6 +278,9 @@
 		phy4-mii-enable;
 
 		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			swphy0: ethernet-phy@0 {
 				reg = <0>;
 				phy-mode = "mii";