ath79: put all devices in alphabetical order in scripts

And remove specifying lan interfaces as eth1.1 because this is
handled by ucidef_add_switch.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

3 files changed, 38 insertions, 51 deletions

diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 4443a55..f13a187 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -62,8 +62,8 @@ case "$board" in
 	ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08"
 	ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10"
 	;;
-"tplink,tl-wr741nd-v4"|\
-"tplink,tl-wr740nd-v4")
+"tplink,tl-wr740nd-v4"|\
+"tplink,tl-wr741nd-v4")
 	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
 	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
 	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 2cffbee..dc320f0 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -9,9 +9,6 @@ ath79_setup_interfaces()
 	local board="$1"
 
 	case "$board" in
-	"etactica,eg200")
-		ucidef_set_interface_lan "eth0" "dhcp"
-		;;
 	"avm,fritz300e"|\
 	"ocedo,raccoon"|\
 	"pcs,cap324"|\
@@ -24,38 +21,49 @@ ath79_setup_interfaces()
 	"ubnt,unifi")
 		ucidef_set_interface_lan "eth0"
 		;;
-
+	"buffalo,wzr-hp-g450h")
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
+		;;
 	"embeddedwireless,dorin")
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
 		;;
-
-	"glinet,ar150")
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	"etactica,eg200")
+		ucidef_set_interface_lan "eth0" "dhcp"
 		;;
-
+	"glinet,ar150"|\
 	"glinet,ar300m")
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
-
+	"netgear,wndr3800")
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
+		ucidef_add_switch_attr "switch0" "blinkrate" 2
+		ucidef_add_switch_port_attr "switch0" 1 led 6
+		ucidef_add_switch_port_attr "switch0" 2 led 9
+		ucidef_add_switch_port_attr "switch0" 5 led 2
+		;;
 	"netgear,wnr612-v2"|\
 	"on,n150r")
-		ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch0" \
 		"0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4"
 		;;
-
 	"pcs,cr3000")
 		ucidef_add_switch "switch0" \
 			"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
 		ucidef_set_interface_wan "eth0"
 		;;
-
 	"pcs,cr5000")
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
 		;;
-
+	"phicomm,k2t")
+		ucidef_add_switch "switch0" \
+			"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
+		;;
 	"tplink,tl-archer-c7-v2")
 		ucidef_add_switch "switch0" \
 			"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
@@ -72,59 +80,38 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
 		;;
-
-	"tplink,tl-wr740n-v2")
-		ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-
-	"tplink,tl-wr741nd-v4"|\
-	"tplink,tl-wr740nd-v4")
-		ucidef_set_interfaces_wan "eth0"
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	"tplink,tl-wr841n-v9")
-		ucidef_set_interface_wan "eth0"
-		ucidef_add_switch "switch0" \
-		"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
 	"tplink,tl-wr1043nd-v1")
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
 		;;
-	"tplink,tl-wr1043nd-v4")
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
-		;;
 	"tplink,tl-wr1043nd-v2"|\
 	"tplink,tl-wr1043nd-v3")
-		ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
 		ucidef_add_switch "switch0" \
 			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
 		;;
+	"tplink,tl-wr1043nd-v4")
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
+		;;
 	"tplink,tl-wr2543-v1")
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
 		;;
-	"netgear,wndr3800")
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	"tplink,tl-wr740n-v2")
+		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch0" \
-			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
-
-		ucidef_add_switch_attr "switch0" "blinkrate" 2
-		ucidef_add_switch_port_attr "switch0" 1 led 6
-		ucidef_add_switch_port_attr "switch0" 2 led 9
-		ucidef_add_switch_port_attr "switch0" 5 led 2
+			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
-	"buffalo,wzr-hp-g450h")
+	"tplink,tl-wr740nd-v4"|\
+	"tplink,tl-wr741nd-v4")
+		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
+			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
-	"phicomm,k2t")
+	"tplink,tl-wr841n-v9")
+		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch0" \
-			"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
+		"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
 	"ubnt,unifiac-mesh-pro"|\
 	"ubnt,unifiac-pro")
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index a687239..2dac776 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -60,9 +60,9 @@ case "$FIRMWARE" in
 	"pcs,cap324"|\
 	"tplink,tl-mr3220-v1"|\
 	"tplink,tl-mr3420-v1"|\
+	"tplink,tl-wr2543-v1"|\
 	"tplink,tl-wr740n-v2"|\
 	"tplink,tl-wr841-v7"|\
-	"tplink,tl-wr2543-v1"|\
 	"ubnt,unifi")
 		ath9k_eeprom_extract "art" 4096 2048
 		;;