fixes reset button on atheros platform, ar5312 gpio_irqs will be added later

SVN-Revision: 12164

5 files changed, 3 insertions, 344 deletions

diff --git a/target/linux/atheros/files/arch/mips/atheros/Makefile b/target/linux/atheros/files/arch/mips/atheros/Makefile
index 0d00336..2c2b991 100644
--- a/target/linux/atheros/files/arch/mips/atheros/Makefile
+++ b/target/linux/atheros/files/arch/mips/atheros/Makefile
@@ -8,6 +8,6 @@
 # Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
 #
 
-obj-y += board.o prom.o reset.o gpio.o
+obj-y += board.o prom.o reset.o
 obj-$(CONFIG_ATHEROS_AR5312) += ar5312/
 obj-$(CONFIG_ATHEROS_AR5315) += ar5315/
diff --git a/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c b/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c
index e2117a2..0cbdc8e 100644
--- a/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c
+++ b/target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c
@@ -55,8 +55,6 @@ asmlinkage void ar5312_irq_dispatch(void)
 			(void)sysRegRead(AR531X_TIMER);
 		} else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC)
 			do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-                else if (ar531x_misc_intrs & AR531X_ISR_GPIO)
-			ar5312_gpio_irq_dispatch();
 		else if ((ar531x_misc_intrs & AR531X_ISR_UART0))
 			do_IRQ(AR531X_MISC_IRQ_UART0);
 		else if (ar531x_misc_intrs & AR531X_ISR_WD)
diff --git a/target/linux/atheros/files/arch/mips/atheros/gpio.c b/target/linux/atheros/files/arch/mips/atheros/gpio.c
deleted file mode 100644
index c51de61..0000000
--- a/target/linux/atheros/files/arch/mips/atheros/gpio.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
- * Copyright (C) 2006 FON Technology, SL.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2007 Othello <bach_ag@hotmail.com>
- */
-
-/*
- * Support for AR531X GPIO -- General Purpose Input/Output Pins
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/irq_cpu.h>
-#include <asm/gpio.h>
-#include "ar531x.h"
-/*
-   GPIO Interrupt Support
-      Make use of request_irq() and the function gpio_to_irq() to trap gpio events
- */
-
-/* Global variables */
-static u32 ar531x_gpio_intr_Mask = 0;
-/*
-    AR5312: I don't have any devices with this chip. Assumed to be similar to AR5215
-    will someone who has one try the code and remove this message if it works?
- */
-
-#ifdef CONFIG_ATHEROS_AR5315
-/*
-    AR5315: Up to 2 GPIO pins may be monitored simultaneously
-    specifying more pins if you already have 2 will not have any effect
-        however, the excess gpio irqs will also be triggered if a valid gpio being monitored triggers
-    only high, low or edge triggered interrupt supported
- */
-static unsigned int ar5315_gpio_set_type_gpio = 0;
-static unsigned int ar5315_gpio_set_type_lvl = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
-#endif
-
-#ifdef CONFIG_ATHEROS_AR5312
-/* Enable the specified AR5312_GPIO_IRQ interrupt */
-static void ar5312_gpio_intr_enable(unsigned int irq) {
-	u32 reg;
-	unsigned int gpio;
-	unsigned int imr;
-
-	gpio = irq - (AR531X_GPIO_IRQ(0));
-	if (gpio >= AR531X_NUM_GPIO)
-		return;
-	ar531x_gpio_intr_Mask |= (1<<gpio);
-
-	reg = sysRegRead(AR531X_GPIO_CR);
-	reg &= ~(AR531X_GPIO_CR_M(gpio) | AR531X_GPIO_CR_UART(gpio) | AR531X_GPIO_CR_INT(gpio));
-	reg |= AR531X_GPIO_CR_I(gpio);
-	reg |= AR531X_GPIO_CR_INT(gpio);
-
-	sysRegWrite(AR531X_GPIO_CR, reg);
-	(void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */
-
-	imr = sysRegRead(AR531X_IMR);
-	imr |= AR531X_ISR_GPIO;
-	sysRegWrite(AR531X_IMR, imr);
-	imr = sysRegRead(AR531X_IMR); /* flush write buffer */
-}
-
-/* Disable the specified AR5312_GPIO_IRQ interrupt */
-static void ar5312_gpio_intr_disable(unsigned int irq) {
-	u32 reg;
-	unsigned int gpio;
-	gpio = irq - (AR531X_GPIO_IRQ(0));
-	if (gpio >= AR531X_NUM_GPIO)
-		return;
-
-	reg = sysRegRead(AR531X_GPIO_CR);
-	reg &= ~(AR531X_GPIO_CR_M(gpio) | AR531X_GPIO_CR_UART(gpio) | AR531X_GPIO_CR_INT(gpio));
-	reg |= AR531X_GPIO_CR_I(gpio);
-	/* No GPIO_CR_INT bit */
-
-	sysRegWrite(AR531X_GPIO_CR, reg);
-	(void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */
-
-	/* Disable Interrupt if no gpio needs triggering */
-	if (ar531x_gpio_intr_Mask != 0) {
-		unsigned int imr;
-
-		imr = sysRegRead(AR531X_IMR);
-		imr &= ~AR531X_ISR_GPIO;
-		sysRegWrite(AR531X_IMR, imr);
-		imr = sysRegRead(AR531X_IMR); /* flush write buffer */
-	}
-
-	ar531x_gpio_intr_Mask &= ~(1<<gpio);
-}
-
-/* Turn on the specified AR5312_GPIO_IRQ interrupt */
-static unsigned int ar5312_gpio_intr_startup(unsigned int irq) {
-	ar5312_gpio_intr_enable(irq);
-	return 0;
-}
-
-static void ar5312_gpio_intr_end(unsigned int irq) {
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		ar5312_gpio_intr_enable(irq);
-}
-
-asmlinkage void ar5312_gpio_irq_dispatch(void) {
-	int i;
-	u32 gpioIntPending;
-	gpioIntPending = sysRegRead(AR531X_GPIO_DI) & ar531x_gpio_intr_Mask;
-	sysRegWrite(AR531X_ISR, sysRegRead(AR531X_IMR) | ~AR531X_ISR_GPIO);
-	for (i=0; i<AR531X_GPIO_IRQ_COUNT; i++) {
-	if (gpioIntPending & (1 << i))
-		do_IRQ(AR531X_GPIO_IRQ(i));
-	}
-}
-#endif	/* #ifdef CONFIG_ATHEROS_AR5312 */
-
-#ifdef CONFIG_ATHEROS_AR5315
-/* Enable the specified AR5315_GPIO_IRQ interrupt */
-static void ar5315_gpio_intr_enable(unsigned int irq) {
-	u32 reg;
-	unsigned int gpio;
-	unsigned int imr;
-	unsigned int i;
-
-	gpio = irq - (AR531X_GPIO_IRQ(0));
-	if (gpio >= AR5315_NUM_GPIO)
-		return;
-	ar531x_gpio_intr_Mask |= (1<<gpio);
-
-	reg = sysRegRead(AR5315_GPIO_CR);
-	reg &= ~(AR5315_GPIO_CR_M(gpio));
-	reg |= AR5315_GPIO_CR_I(gpio);
-	sysRegWrite(AR5315_GPIO_CR, reg);
-	(void)sysRegRead(AR5315_GPIO_CR); /* flush write to hardware */
-
-	/* Locate a free register slot to enable gpio intr
-	   will fail silently if no more slots are available
-	 */
-	reg = sysRegRead(AR5315_GPIO_INT);
-	for (i=0 ; i<=AR5315_GPIO_INT_MAX_Y ; i++) {
-		/* Free slot means trigger level = 0 */
-		if ( AR5315_GPIO_INT_LVL_OFF ==
-		    (reg & AR5315_GPIO_INT_LVL_M) ) {
-
-			unsigned int def_lvl = AR5315_GPIO_INT_LVL_EDGE;
-			if (ar5315_gpio_set_type_gpio == gpio)
-				def_lvl = ar5315_gpio_set_type_lvl;
-
-			/* Set the gpio level trigger mode */
-/*			reg &= ~(AR5315_GPIO_INT_LVL_M(i)); */
-			reg |= AR5315_GPIO_INT_LVL(def_lvl);
-
-			/* Enable the gpio pin */
-			reg &= ~(AR5315_GPIO_INT_M);
-			reg |= AR5315_GPIO_INT_S(i);
-
-			sysRegWrite(AR5315_GPIO_INT, reg);
-			(void)sysRegRead(AR5315_GPIO_INT); /* flush write to hardware */
-
-			/* break out of for loop */
-			break;
-		} /* end if trigger level for slot i is 0 */
-	} /* end for each slot */
-
-	imr = sysRegRead(AR5315_IMR);
-	imr |= AR5315_ISR_GPIO;
-	sysRegWrite(AR5315_IMR, imr);
-	imr = sysRegRead(AR5315_IMR); /* flush write buffer */
-}
-
-
-/* Disable the specified AR5315_GPIO_IRQ interrupt */
-static void ar5315_gpio_intr_disable(unsigned int irq) {
-	u32 reg;
-	unsigned int gpio;
-	unsigned int i;
-
-	gpio = irq - (AR531X_GPIO_IRQ(0));
-	if (gpio >= AR5315_NUM_GPIO)
-		return;
-
-	reg = sysRegRead(AR5315_GPIO_CR);
-	reg &= ~(AR5315_GPIO_CR_M(gpio));
-	reg |= AR5315_GPIO_CR_I(gpio);
-	sysRegWrite(AR5315_GPIO_CR, reg);
-	(void)sysRegRead(AR5315_GPIO_CR); /* flush write to hardware */
-
-	/* Locate a the correct register slot to disable gpio intr */
-	reg = sysRegRead(AR5315_GPIO_INT);
-	for (i=0 ; i<=AR5315_GPIO_INT_MAX_Y ; i++) {
-		/* If this correct  */
-		if ( AR5315_GPIO_INT_S(i) ==
-		    (reg & AR5315_GPIO_INT_M) ) {
-			/* Clear the gpio level trigger mode */
-			reg &= ~(AR5315_GPIO_INT_LVL_M);
-
-			sysRegWrite(AR5315_GPIO_INT, reg);
-			(void)sysRegRead(AR5315_GPIO_INT); /* flush write to hardware */
-			break;
-		} /* end if trigger level for slot i is 0 */
-	} /* end for each slot */
-
-	/* Disable interrupt only if no gpio needs triggering */
-	if (ar531x_gpio_intr_Mask != 0) {
-		unsigned int imr;
-
-		imr = sysRegRead(AR5315_IMR);
-		imr &= ~AR5315_ISR_GPIO;
-		sysRegWrite(AR5315_IMR, imr);
-		imr = sysRegRead(AR5315_IMR); /* flush write buffer */
-	}
-
-	ar531x_gpio_intr_Mask &= ~(1<<gpio);
-}
-
-/* Turn on the specified AR5315_GPIO_IRQ interrupt */
-static unsigned int ar5315_gpio_intr_startup(unsigned int irq) {
-	ar5315_gpio_intr_enable(irq);
-	return 0;
-}
-
-static void ar5315_gpio_intr_end(unsigned int irq) {
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		ar5315_gpio_intr_enable(irq);
-}
-
-static int ar5315_gpio_intr_set_type(unsigned int irq, unsigned int flow_type) {
-	ar5315_gpio_set_type_gpio = irq - (AR531X_GPIO_IRQ(0));
-	if (ar5315_gpio_set_type_gpio > AR5315_NUM_GPIO)
-		return -EINVAL;
-	switch (flow_type & IRQF_TRIGGER_MASK) {
-		case IRQF_TRIGGER_RISING:
-		case IRQF_TRIGGER_FALLING:
-			printk(KERN_WARNING "AR5315 GPIO %u falling back to edge triggered\n", ar5315_gpio_set_type_gpio);
-		case IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING:
-			ar5315_gpio_set_type_lvl = AR5315_GPIO_INT_LVL_EDGE;
-			break;
-		case IRQF_TRIGGER_LOW:
-			ar5315_gpio_set_type_lvl = AR5315_GPIO_INT_LVL_LOW;
-			break;
-		case IRQF_TRIGGER_HIGH:
-			ar5315_gpio_set_type_lvl = AR5315_GPIO_INT_LVL_HIGH;
-			break;
-		default:
-			return -EINVAL;
-	}
-	return 0;
-}
-
-asmlinkage void ar5315_gpio_irq_dispatch(void){
-	int i;
-	u32 gpioIntPending;
-	gpioIntPending = sysRegRead(AR5315_GPIO_DI) & ar531x_gpio_intr_Mask;
-	sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~AR5315_ISR_GPIO);
-	for (i=0; i<AR531X_GPIO_IRQ_COUNT; i++) {
-	if (gpioIntPending & (1 << i))
-		do_IRQ(AR531X_GPIO_IRQ(i));
-	}
-}
-#endif /* #ifdef CONFIG_ATHEROS_AR5315  */
-
-/* Common Code */
-static struct irq_chip ar531x_gpio_intr_controller = {
-	.typename	= "AR531X GPIO",
-};
-
-/* ARGSUSED */
-irqreturn_t
-spurious_gpio_handler(int cpl, void *dev_id)
-{
-	u32 gpioDataIn;
-	DO_AR5312(gpioDataIn = sysRegRead(AR531X_GPIO_DI);)
-	DO_AR5315(gpioDataIn = sysRegRead(AR5315_GPIO_DI);)
-
-	printk("spurious_gpio_handler: 0x%08x dev=%p DI=0x%08x gpioIntMask=0x%08x\n",
-		cpl, dev_id, gpioDataIn, ar531x_gpio_intr_Mask);
-
-	return IRQ_NONE;
-}
-
-static struct irqaction spurious_gpio  = {
-	.handler	= spurious_gpio_handler,
-	.name		= "spurious_gpio",
-};
-
-/* Initialize AR531X GPIO interrupts */
-static int __init ar531x_gpio_init(void)
-{
-	int i;
-
-	DO_AR5312( \
-		ar531x_gpio_intr_controller.startup = ar5312_gpio_intr_startup; \
-		ar531x_gpio_intr_controller.shutdown = ar5312_gpio_intr_disable; \
-		ar531x_gpio_intr_controller.enable = ar5312_gpio_intr_enable; \
-		ar531x_gpio_intr_controller.disable = ar5312_gpio_intr_disable; \
-		ar531x_gpio_intr_controller.ack = ar5312_gpio_intr_disable; \
-		ar531x_gpio_intr_controller.end = ar5312_gpio_intr_end; \
-	)
-
-	DO_AR5315( \
-		ar531x_gpio_intr_controller.startup = ar5315_gpio_intr_startup; \
-		ar531x_gpio_intr_controller.shutdown = ar5315_gpio_intr_disable; \
-		ar531x_gpio_intr_controller.enable = ar5315_gpio_intr_enable; \
-		ar531x_gpio_intr_controller.disable = ar5315_gpio_intr_disable; \
-		ar531x_gpio_intr_controller.ack = ar5315_gpio_intr_disable; \
-		ar531x_gpio_intr_controller.end = ar5315_gpio_intr_end; \
-		ar531x_gpio_intr_controller.set_type = ar5315_gpio_intr_set_type; \
-	)
-
-	for (i = AR531X_GPIO_IRQ_BASE;
-	     i < AR531X_GPIO_IRQ_BASE + AR531X_GPIO_IRQ_COUNT;
-	     i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-		irq_desc[i].chip = &ar531x_gpio_intr_controller;
-	}
-
-	setup_irq(AR531X_GPIO_IRQ_NONE, &spurious_gpio);
-
-	return 0;
-}
-
-subsys_initcall(ar531x_gpio_init);
-
diff --git a/target/linux/atheros/files/arch/mips/atheros/reset.c b/target/linux/atheros/files/arch/mips/atheros/reset.c
index 2342de8..876fa29 100644
--- a/target/linux/atheros/files/arch/mips/atheros/reset.c
+++ b/target/linux/atheros/files/arch/mips/atheros/reset.c
@@ -9,7 +9,7 @@
 #include <asm/uaccess.h>
 #include <ar531x.h>
 
-#define AR531X_RESET_GPIO_IRQ	(AR531X_GPIO_IRQ_BASE + bcfg->resetConfigGpio)
+#define AR531X_RESET_GPIO_IRQ	(AR531X_GPIO_IRQ(bcfg->resetConfigGpio))
 
 struct event_t {
 	struct work_struct wq;
diff --git a/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h b/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h
index ba52a2b..8148b76 100644
--- a/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h
+++ b/target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x.h
@@ -54,7 +54,7 @@ extern void (*board_time_init)(void);
 
 /* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
 #define AR531X_GPIO_IRQ_NONE            AR531X_GPIO_IRQ_BASE+0
-#define AR531X_GPIO_IRQ(n)              AR531X_GPIO_IRQ_BASE+(n)+1
+#define AR531X_GPIO_IRQ(n)              AR531X_GPIO_IRQ_BASE+n
 #define AR531X_GPIO_IRQ_COUNT           22
 
 #define sysRegRead(phys)	\